3f7c3c3c25
Add basic support for LinkSprite pcDuino board series including pcDuino, pcDuino-Lite, pcDuino-Lite-WiFi. Tested on pcDuino-Lite-WiFi. Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
43 lines
1 KiB
Plaintext
43 lines
1 KiB
Plaintext
pcDuino v1 boards (http://www.linksprite.com/linksprite-pcduino)
|
|
|
|
Intro
|
|
=====
|
|
|
|
This default configuration will allow you to start experimenting
|
|
with the buildroot environment for the LinkSprite pcDuino v1 board
|
|
including its flavors pcDuino-Lite and pcDuino-Lite-WiFi. With the
|
|
current configuration it will bring-up the board and allow access
|
|
through the serial console as well as ethernet and wireless
|
|
network interfaces.
|
|
|
|
How to build it
|
|
===============
|
|
|
|
Configure Buildroot:
|
|
|
|
$ make linksprite_pcduino_defconfig
|
|
|
|
Modify configuration if needed, e.g. add more packages to target:
|
|
|
|
$ make menuconfig
|
|
|
|
Compile everything and build the SD card image:
|
|
|
|
$ make
|
|
|
|
How to write the SD card
|
|
========================
|
|
|
|
Once the build process is finished you will have an image
|
|
called "sdcard.img" in the output/images/ directory.
|
|
|
|
Copy the bootable "sdcard.img" onto an SD card with "dd":
|
|
|
|
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
|
|
|
|
How to boot new image
|
|
=====================
|
|
|
|
Insert SD card and reset the board. By default pcDuino board
|
|
boots from SD card.
|