buildroot

History

Jagan Teki 209f98154f configs/orangepi_one_plus: new defconfig Add initial support for Orangepi One Plus board with below features: - U-Boot 2018.09 - Linux 4.19.0-rc8 - Default packages from buildroot Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>		2018-12-16 15:54:40 +01:00
..
extlinux.conf	configs/orangepi_one_plus: new defconfig	2018-12-16 15:54:40 +01:00
genimage.cfg	configs/orangepi_one_plus: new defconfig	2018-12-16 15:54:40 +01:00
post-build.sh	configs/orangepi_one_plus: new defconfig	2018-12-16 15:54:40 +01:00
readme.txt	configs/orangepi_one_plus: new defconfig	2018-12-16 15:54:40 +01:00

readme.txt

Intro
=====

This default configuration will allow you to start experimenting with the
buildroot environment for the Orangepi One Plus. With the current configuration
it will bring-up the board, and allow access through the serial console.

Orangepi One Plus link:
http://www.orangepi.org/OrangePiOneplus/

Wiki link:
https://openedev.amarulasolutions.com/display/ODWIKI/Orangepi+One+Plus

This configuration uses U-Boot mainline and kernel mainline.

How to build
============

    $ make orangepi_one_plus_defconfig
    $ make

Note: you will need access to the internet to download the required
sources.

How to write the SD card
========================

Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.

Copy the bootable "sdcard.img" onto an SD card with "dd":

  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
  $ sudo sync

Insert the micro SDcard in your Orangepi One Plus and power it up. The console
is on the serial line, 115200 8N1.