buildroot

History

Peter Korsgaard d7d82a318b config: add defconfig for orangepi-r1 Very similar to orangepi-zero, except that the board has a 16MB SPI flash, a 2nd ethernet port is provided through a Realtek RTL8152 and wifi is provided through a Realtek RTL8189FTV (no mainline driver, not supported). Signed-off-by: Peter Korsgaard <peter@korsgaard.com>		2019-05-05 21:12:04 +02:00
..
boot.cmd	config: add defconfig for orangepi-r1	2019-05-05 21:12:04 +02:00
genimage.cfg	config: add defconfig for orangepi-r1	2019-05-05 21:12:04 +02:00
linux-extras.config	config: add defconfig for orangepi-r1	2019-05-05 21:12:04 +02:00
readme.txt	config: add defconfig for orangepi-r1	2019-05-05 21:12:04 +02:00

readme.txt

OrangePi R1

Intro
=====

This default configuration will allow you to start experimenting with the
buildroot environment for the OrangePi R1. With the current configuration
it will bring-up the board, and allow access through the serial console.

How to build it
===============

Configure Buildroot:

    $ make orangepi_r1_defconfig

Compile everything and build the SD card image:

    $ make

How to write the SD card
========================

Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.

Copy the bootable "sdcard.img" onto an SD card with "dd":

  $ sudo dd if=output/images/sdcard.img of=/dev/sdX