buildroot

History

Suniel Mahesh 1f0130feda configs/rock_pi_n10: new defconfig Add initial support for RK3399PRO SOM based rockpi-n10 target with below features: - Custom U-Boot 2020.07-rc4 https://github.com/amarula/u-boot-amarula.git branch rock-pi - Linux 5.7.2 - GPT partition layout is being used - Default packages from buildroot Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>		2020-07-12 22:02:49 +02:00
..
extlinux.conf	configs/rock_pi_n10: new defconfig	2020-07-12 22:02:49 +02:00
genimage.cfg	configs/rock_pi_n10: new defconfig	2020-07-12 22:02:49 +02:00
post-build.sh	configs/rock_pi_n10: new defconfig	2020-07-12 22:02:49 +02:00
readme.txt	configs/rock_pi_n10: new defconfig	2020-07-12 22:02:49 +02:00

readme.txt

RADXA ROCKPI-N10
================
https://wiki.radxa.com/RockpiN10

Build:
======
  $ make rock_pi_n10_defconfig
  $ make

Files created in output directory
=================================

output/images
.
├── bl31.elf
├── boot.vfat
├── extlinux
├── idbloader.img
├── Image
├── rk3399pro-rock-pi-n10.dtb
├── rootfs.ext2
├── rootfs.ext4 -> rootfs.ext2
├── rootfs.tar
├── sdcard.img
├── u-boot.bin
└── u-boot.itb

Creating bootable SD card:
==========================

Simply invoke (as root)

sudo dd if=output/images/sdcard.img of=/dev/sdX && sync

Where X is your SD card device.

Booting:
========

Serial console:
---------------
RockPi-N10 has a 40-pin GPIO header. The pin layout is as follows:

pin 6:  gnd
pin 8:  tx
pin 10: rx

Baudrate for this board is 1500000.

The boot order on rockpi-n10 is emmc, sd. If emmc contains a valid Image, the board
always boots from emmc. To boot from SD, erase emmc as per the guide:

https://wiki.amarulasolutions.com/bsp/setup/rockchip/rk3399_emmc.html

Login:
------
Enter 'root' as login user, and the prompt is ready.

wiki link:
----------
https://wiki.amarulasolutions.com/bsp/rockchip/rk3399pro/rock-pi-n10.html