![Thomas Petazzoni](/assets/img/avatar_default.png)
Since the bump to Linux 4.19 in commit
ed02414e9c
, the number of kernel modules
built has increased significantly, to the point where the default of
60 MB for the ext4 image is no longer sufficient, so let's increase to
120 MB.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/199339561
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
38 lines
1.1 KiB
Plaintext
38 lines
1.1 KiB
Plaintext
BR2_arm=y
|
|
BR2_arm1176jzf_s=y
|
|
BR2_ARM_EABIHF=y
|
|
|
|
BR2_SYSTEM_DHCP="eth0"
|
|
|
|
# Linux headers same as kernel, a 4.19 series
|
|
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y
|
|
|
|
BR2_TOOLCHAIN_BUILDROOT_CXX=y
|
|
|
|
BR2_LINUX_KERNEL=y
|
|
BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
|
|
BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,5eeff139ea9135db6e01a58ef613338f1d0899d8)/linux-5eeff139ea9135db6e01a58ef613338f1d0899d8.tar.gz"
|
|
BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi"
|
|
|
|
# Build the DTBs for A/B, A+/B+ and compute module from the kernel sources
|
|
BR2_LINUX_KERNEL_DTS_SUPPORT=y
|
|
BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2708-rpi-b bcm2708-rpi-b-plus bcm2708-rpi-cm"
|
|
|
|
BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
|
|
|
|
BR2_PACKAGE_RPI_FIRMWARE=y
|
|
# BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTB_OVERLAYS is not set
|
|
|
|
# Required tools to create the SD image
|
|
BR2_PACKAGE_HOST_DOSFSTOOLS=y
|
|
BR2_PACKAGE_HOST_GENIMAGE=y
|
|
BR2_PACKAGE_HOST_MTOOLS=y
|
|
|
|
# Filesystem / image
|
|
BR2_TARGET_ROOTFS_EXT2=y
|
|
BR2_TARGET_ROOTFS_EXT2_4=y
|
|
BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi/post-build.sh"
|
|
BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi/post-image.sh"
|