buildroot

History

Peter Korsgaard 42c882ba21 orangepipc: Accommodate U-Boot environment on SD-card As described by http://linux-sunxi.org/Bootable_SD_card#SD_Card_Layout The space betweem 544KB..1MB is reserved / used for the u-boot environment, so mark it as such to make sure genimage doesn't put other partitions here. Signed-off-by: Peter Korsgaard <peter@korsgaard.com>		2016-07-02 13:19:12 +02:00
..
boot.cmd	configs: new orangepipc_defconfig	2015-12-28 18:05:14 +01:00
genimage.cfg	orangepipc: Accommodate U-Boot environment on SD-card	2016-07-02 13:19:12 +02:00
post-build.sh	configs: new orangepipc_defconfig	2015-12-28 18:05:14 +01:00
post-image.sh	configs/orangepi: Changing Linux kernel to v4.5-rc1	2016-01-29 17:50:11 +01:00
readme.txt	configs/orangepi: Changing Linux kernel to v4.5-rc1	2016-01-29 17:50:11 +01:00

readme.txt

OrangePi PC

Intro
=====

This default configuration will allow you to start experimenting with the
buildroot environment for the OrangePi PC. With the current configuration
it will bring-up the board, and allow access through the serial console.

How to build it
===============

Configure Buildroot:

    $ make orangepipc_defconfig

Compile everything and build the SD card image:

    $ make

How to write the SD card
========================

Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.

Copy the bootable "sdcard.img" onto an SD card with "dd":

  $ sudo dd if=output/images/sdcard.img of=/dev/sdX