deepcrayon/buildroot
deepcrayon/buildroot
1
0
Fork 0
Code Issues Pull requests Packages Projects Releases Wiki Activity
buildroot/package/pkg-autotools.mk
Romain Naour ba4af1a06d core/pkg-autotools: don't use APPLY_PATCHES for libtool patches 
Since [1] <package>-reconfigure target is broken.

$ make elementary-reconfigure
Applying buildroot-libtool-v2.4.4.patch using patch:
Error: duplicate filename 'buildroot-libtool-v2.4.4.patch'
Conflicting files are:
  already applied: buildroot/support/libtool/buildroot-libtool-v2.4.4.patch
  to be applied  : buildroot/support/libtool/buildroot-libtool-v2.4.4.patch

When a package uses AUTORECONF, the libtool patch can be applied a
second time on the same ltmain.sh in the same directory as the
<package>-reconfigure target is called. This is not a problem since
autoreconf will overwrite the previously patched files. But with the
check introduced by [1], apply-patches.sh throw an error when the
package is reconfigured since the libtool patch is already present in
.applied_patches_list.

In addition to this, the .applied_patches_list file generated by
apply-patches.sh while patching ltmain.sh is not in the top-level
package source directory. Instead a duplicated .applied_patches_list
is generated beside the patched ltmain.sh which can be in a
subdirectory.

As noticed by Arnout Vandecappelle [2], the apply-patches.sh script
doesn't bring anything for the libtool patches.

"apply_patches.sh does the following:

* It handles directories -> not needed here.
* It handles compressed patches and tarballs -> not needed.
* It handles series files -> not needed.
* It handles errors in case of multiple patches -> not needed since
it's only one patch.
* It detects errors based on *.rej files -> not needed since it's only
a single patch so patch exit code is OK.
* It writes the patch list -> for libtool, this is quite silly because
it will be written in the directory where ltmain.sh is found, not in the
top-level directory, so you have these patch lists spread over the
source tree."

So use patch directly rather than apply-patches.

[1] 1924159814
[2] http://lists.busybox.net/pipermail/buildroot/2016-August/169810.html

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-08-18 23:52:47 +02:00

316 lines
9.2 KiB
Makefile
Raw Blame History

################################################################################
# Autotools package infrastructure
#
# This file implements an infrastructure that eases development of
# package .mk files for autotools packages. It should be used for all
# packages that use the autotools as their build system.
#
# See the Buildroot documentation for details on the usage of this
# infrastructure
#
# In terms of implementation, this autotools infrastructure requires
# the .mk file to only specify metadata information about the
# package: name, version, download URL, etc.
#
# We still allow the package .mk file to override what the different
# steps are doing, if needed. For example, if <PKG>_BUILD_CMDS is
# already defined, it is used as the list of commands to perform to
# build the package, instead of the default autotools behaviour. The
# package can also define some post operation hooks.
#
################################################################################
#
# Utility function to upgrade config.sub and config.guess files
#
# argument 1 : directory into which config.guess and config.sub need
# to be updated. Note that config.sub and config.guess are searched
# recursively in this directory.
#
define CONFIG_UPDATE
for file in config.guess config.sub; do \
for i in $$(find $(1) -name $$file); do \
cp support/gnuconfig/$$file $$i; \
done; \
done
endef
# This function generates the ac_cv_file_<foo> value for a given
# filename. This is needed to convince configure script doing
# AC_CHECK_FILE() tests that the file actually exists, since such
# tests cannot be done in a cross-compilation context. This function
# takes as argument the path of the file. An example usage is:
#
# FOOBAR_CONF_ENV = \
# $(call AUTOCONF_AC_CHECK_FILE_VAL,/dev/random)=yes
AUTOCONF_AC_CHECK_FILE_VAL = ac_cv_file_$(subst -,_,$(subst /,_,$(subst .,_,$(1))))
#
# Hook to update config.sub and config.guess if needed
#
define UPDATE_CONFIG_HOOK
@$(call MESSAGE,"Updating config.sub and config.guess")
$(call CONFIG_UPDATE,$(@D))
endef
#
# Hook to patch libtool to make it work properly for cross-compilation
#
define LIBTOOL_PATCH_HOOK
@$(call MESSAGE,"Patching libtool")
$(Q)for i in `find $($(PKG)_SRCDIR) -name ltmain.sh`; do \
ltmain_version=`sed -n '/^[ \t]*VERSION=/{s/^[ \t]*VERSION=//;p;q;}' $$i | \
sed -e 's/\([0-9]*\.[0-9]*\).*/\1/' -e 's/\"//'`; \
ltmain_patchlevel=`sed -n '/^[ \t]*VERSION=/{s/^[ \t]*VERSION=//;p;q;}' $$i | \
sed -e 's/\([0-9]*\.[0-9]*\.*\)\([0-9]*\).*/\2/' -e 's/\"//'`; \
if test $${ltmain_version} = '1.5'; then \
patch -i support/libtool/buildroot-libtool-v1.5.patch $${i}; \
elif test $${ltmain_version} = "2.2"; then\
patch -i support/libtool/buildroot-libtool-v2.2.patch $${i}; \
elif test $${ltmain_version} = "2.4"; then\
if test $${ltmain_patchlevel:-0} -gt 2; then\
patch -i support/libtool/buildroot-libtool-v2.4.4.patch $${i}; \
else \
patch -i support/libtool/buildroot-libtool-v2.4.patch $${i}; \
fi \
fi \
done
endef
#
# Hook to gettextize the package if needed
#
define GETTEXTIZE_HOOK
@$(call MESSAGE,"Gettextizing")
$(Q)cd $($(PKG)_SRCDIR) && $(GETTEXTIZE) $($(PKG)_GETTEXTIZE_OPTS)
endef
#
# Hook to autoreconf the package if needed
#
define AUTORECONF_HOOK
@$(call MESSAGE,"Autoreconfiguring")
$(Q)cd $($(PKG)_SRCDIR) && $($(PKG)_AUTORECONF_ENV) $(AUTORECONF) $($(PKG)_AUTORECONF_OPTS)
endef
################################################################################
# inner-autotools-package -- defines how the configuration, compilation and
# installation of an autotools package should be done, implements a
# few hooks to tune the build process for autotools specifities and
# calls the generic package infrastructure to generate the necessary
# make targets
#
# argument 1 is the lowercase package name
# argument 2 is the uppercase package name, including a HOST_ prefix
# for host packages
# argument 3 is the uppercase package name, without the HOST_ prefix
# for host packages
# argument 4 is the type (target or host)
################################################################################
define inner-autotools-package
ifndef $(2)_LIBTOOL_PATCH
ifdef $(3)_LIBTOOL_PATCH
$(2)_LIBTOOL_PATCH = $$($(3)_LIBTOOL_PATCH)
else
$(2)_LIBTOOL_PATCH ?= YES
endif
endif
ifndef $(2)_MAKE
ifdef $(3)_MAKE
$(2)_MAKE = $$($(3)_MAKE)
else
$(2)_MAKE ?= $$(MAKE)
endif
endif
ifndef $(2)_AUTORECONF
ifdef $(3)_AUTORECONF
$(2)_AUTORECONF = $$($(3)_AUTORECONF)
else
$(2)_AUTORECONF ?= NO
endif
endif
ifndef $(2)_GETTEXTIZE
ifdef $(3)_GETTEXTIZE
$(2)_GETTEXTIZE = $$($(3)_GETTEXTIZE)
else
$(2)_GETTEXTIZE ?= NO
endif
endif
ifeq ($(4),host)
$(2)_GETTEXTIZE_OPTS ?= $$($(3)_GETTEXTIZE_OPTS)
endif
ifeq ($(4),host)
$(2)_AUTORECONF_OPTS ?= $$($(3)_AUTORECONF_OPTS)
endif
$(2)_CONF_ENV ?=
$(2)_CONF_OPTS ?=
$(2)_MAKE_ENV ?=
$(2)_MAKE_OPTS ?=
$(2)_INSTALL_OPTS ?= install
$(2)_INSTALL_STAGING_OPTS ?= DESTDIR=$$(STAGING_DIR) install
$(2)_INSTALL_TARGET_OPTS ?= DESTDIR=$$(TARGET_DIR) install
#
# Configure step. Only define it if not already defined by the package
# .mk file. And take care of the differences between host and target
# packages.
#
ifndef $(2)_CONFIGURE_CMDS
ifeq ($(4),target)
# Configure package for target
define $(2)_CONFIGURE_CMDS
(cd $$($$(PKG)_SRCDIR) && rm -rf config.cache && \
$$(TARGET_CONFIGURE_OPTS) \
$$(TARGET_CONFIGURE_ARGS) \
$$($$(PKG)_CONF_ENV) \
CONFIG_SITE=/dev/null \
./configure \
--target=$$(GNU_TARGET_NAME) \
--host=$$(GNU_TARGET_NAME) \
--build=$$(GNU_HOST_NAME) \
--prefix=/usr \
--exec-prefix=/usr \
--sysconfdir=/etc \
--localstatedir=/var \
--program-prefix="" \
--disable-gtk-doc \
--disable-gtk-doc-html \
--disable-doc \
--disable-docs \
--disable-documentation \
--with-xmlto=no \
--with-fop=no \
--disable-dependency-tracking \
--enable-ipv6 \
$$(DISABLE_NLS) \
$$(SHARED_STATIC_LIBS_OPTS) \
$$(QUIET) $$($$(PKG)_CONF_OPTS) \
)
endef
else
# Configure package for host
# disable all kind of documentation generation in the process,
# because it often relies on host tools which may or may not be
# installed.
define $(2)_CONFIGURE_CMDS
(cd $$($$(PKG)_SRCDIR) && rm -rf config.cache; \
$$(HOST_CONFIGURE_OPTS) \
CFLAGS="$$(HOST_CFLAGS)" \
LDFLAGS="$$(HOST_LDFLAGS)" \
$$($$(PKG)_CONF_ENV) \
CONFIG_SITE=/dev/null \
./configure \
--prefix="$$(HOST_DIR)/usr" \
--sysconfdir="$$(HOST_DIR)/etc" \
--localstatedir="$$(HOST_DIR)/var" \
--enable-shared --disable-static \
--disable-gtk-doc \
--disable-gtk-doc-html \
--disable-doc \
--disable-docs \
--disable-documentation \
--disable-debug \
--with-xmlto=no \
--with-fop=no \
--disable-dependency-tracking \
$$(QUIET) $$($$(PKG)_CONF_OPTS) \
)
endef
endif
endif
$(2)_POST_PATCH_HOOKS += UPDATE_CONFIG_HOOK
ifeq ($$($(2)_AUTORECONF),YES)
# This has to come before autoreconf
ifeq ($$($(2)_GETTEXTIZE),YES)
$(2)_PRE_CONFIGURE_HOOKS += GETTEXTIZE_HOOK
$(2)_DEPENDENCIES += host-gettext
endif
$(2)_PRE_CONFIGURE_HOOKS += AUTORECONF_HOOK
# default values are not evaluated yet, so don't rely on this defaulting to YES
ifneq ($$($(2)_LIBTOOL_PATCH),NO)
$(2)_PRE_CONFIGURE_HOOKS += LIBTOOL_PATCH_HOOK
endif
$(2)_DEPENDENCIES += host-automake host-autoconf host-libtool
else # ! AUTORECONF = YES
# default values are not evaluated yet, so don't rely on this defaulting to YES
ifneq ($$($(2)_LIBTOOL_PATCH),NO)
$(2)_POST_PATCH_HOOKS += LIBTOOL_PATCH_HOOK
endif
endif
#
# Build step. Only define it if not already defined by the package .mk
# file.
#
ifndef $(2)_BUILD_CMDS
ifeq ($(4),target)
define $(2)_BUILD_CMDS
$$(TARGET_MAKE_ENV) $$($$(PKG)_MAKE_ENV) $$($$(PKG)_MAKE) $$($$(PKG)_MAKE_OPTS) -C $$($$(PKG)_SRCDIR)
endef
else
define $(2)_BUILD_CMDS
$$(HOST_MAKE_ENV) $$($$(PKG)_MAKE_ENV) $$($$(PKG)_MAKE) $$($$(PKG)_MAKE_OPTS) -C $$($$(PKG)_SRCDIR)
endef
endif
endif
#
# Host installation step. Only define it if not already defined by the
# package .mk file.
#
ifndef $(2)_INSTALL_CMDS
define $(2)_INSTALL_CMDS
$$(HOST_MAKE_ENV) $$($$(PKG)_MAKE_ENV) $$($$(PKG)_MAKE) $$($$(PKG)_INSTALL_OPTS) -C $$($$(PKG)_SRCDIR)
endef
endif
#
# Staging installation step. Only define it if not already defined by
# the package .mk file.
#
ifndef $(2)_INSTALL_STAGING_CMDS
define $(2)_INSTALL_STAGING_CMDS
$$(TARGET_MAKE_ENV) $$($$(PKG)_MAKE_ENV) $$($$(PKG)_MAKE) $$($$(PKG)_INSTALL_STAGING_OPTS) -C $$($$(PKG)_SRCDIR)
endef
endif
#
# Target installation step. Only define it if not already defined by
# the package .mk file.
#
ifndef $(2)_INSTALL_TARGET_CMDS
define $(2)_INSTALL_TARGET_CMDS
$$(TARGET_MAKE_ENV) $$($$(PKG)_MAKE_ENV) $$($$(PKG)_MAKE) $$($$(PKG)_INSTALL_TARGET_OPTS) -C $$($$(PKG)_SRCDIR)
endef
endif
# Call the generic package infrastructure to generate the necessary
# make targets
$(call inner-generic-package,$(1),$(2),$(3),$(4))
endef
################################################################################
# autotools-package -- the target generator macro for autotools packages
################################################################################
autotools-package = $(call inner-autotools-package,$(pkgname),$(call UPPERCASE,$(pkgname)),$(call UPPERCASE,$(pkgname)),target)
host-autotools-package = $(call inner-autotools-package,host-$(pkgname),$(call UPPERCASE,host-$(pkgname)),$(call UPPERCASE,$(pkgname)),host)
Reference in a new issue View git blame Copy permalink