buildroot/board/beagleboardx15
Giulio Benetti 4101136423 board/beagleboardx15/genimage.cfg: beautify file
Beatify this genimage .cfg file to have consistency with all genimage .cfg
files in Buildroot.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2021-11-08 22:59:25 +01:00
..
genimage.cfg board/beagleboardx15/genimage.cfg: beautify file 2021-11-08 22:59:25 +01:00
readme.txt board/beagleboardx15: replace utf-8 graphic sympols by ascii characters 2019-05-18 23:34:22 +02:00

BeagleBoard X15

Intro
=====
This config currently supports the beagleboard x15,
and generates a barebone image.

The image must be flashed to a SD card to be used.

How to build it
===============

  $ make beagleboardx15_defconfig

Then you can edit the build options using

  $ make menuconfig

Compile all and build a sdcard image:

  $ make

Result of the build
-------------------

After building, you should get a tree like this:

  output/images/
  +-- am57xx-beagle-x15.dtb
  +-- am57xx-beagle-x15-revb1.dtb
  +-- boot.vfat
  +-- MLO
  +--rootfs.ext2
  +-- rootfs.ext4
  +-- rootfs.tar
  +-- sdcard.img
  +-- u-boot.img
  +-- u-boot-spl.bin
  +-- zImage

How to write the microSD card
=============================

Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.

Copy the bootable "sdcard.img" onto an SD card with "dd":

  $ sudo dd if=output/images/sdcard.img of=/dev/sdX