From 5c13dbf6ee260593b766cd5c82676692066f56c1 Mon Sep 17 00:00:00 2001 From: Damien Date: Sat, 9 Nov 2013 20:15:17 +0000 Subject: [PATCH] STM: add RNG support. --- stm/Makefile | 1 + stm/lib/stm32f4xx_rng.c | 398 ++++++++++++++++++++++++++++++++++++++++ stm/lib/stm32f4xx_rng.h | 120 ++++++++++++ 3 files changed, 519 insertions(+) create mode 100644 stm/lib/stm32f4xx_rng.c create mode 100644 stm/lib/stm32f4xx_rng.h diff --git a/stm/Makefile b/stm/Makefile index 3752e694a..fa98c6c8e 100644 --- a/stm/Makefile +++ b/stm/Makefile @@ -73,6 +73,7 @@ SRC_STM = \ stm32f4xx_usart.c \ stm32f4xx_spi.c \ stm32f4xx_dac.c \ + stm32f4xx_rng.c \ stm_misc.c \ usb_core.c \ usb_dcd.c \ diff --git a/stm/lib/stm32f4xx_rng.c b/stm/lib/stm32f4xx_rng.c new file mode 100644 index 000000000..3fb52f291 --- /dev/null +++ b/stm/lib/stm32f4xx_rng.c @@ -0,0 +1,398 @@ +/** + ****************************************************************************** + * @file stm32f4xx_rng.c + * @author MCD Application Team + * @version V1.1.0 + * @date 11-January-2013 + * @brief This file provides firmware functions to manage the following + * functionalities of the Random Number Generator (RNG) peripheral: + * + Initialization and Configuration + * + Get 32 bit Random number + * + Interrupts and flags management + * +@verbatim + + =================================================================== + ##### How to use this driver ##### + =================================================================== + [..] + (#) Enable The RNG controller clock using + RCC_AHB2PeriphClockCmd(RCC_AHB2Periph_RNG, ENABLE) function. + + (#) Activate the RNG peripheral using RNG_Cmd() function. + + (#) Wait until the 32 bit Random number Generator contains a valid random data + (using polling/interrupt mode). For more details, refer to "Interrupts and + flags management functions" module description. + + (#) Get the 32 bit Random number using RNG_GetRandomNumber() function + + (#) To get another 32 bit Random number, go to step 3. + + +@endverbatim + * + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2013 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_conf.h" +#include "stm32f4xx_rng.h" +#include "stm32f4xx_rcc.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup RNG + * @brief RNG driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup RNG_Private_Functions + * @{ + */ + +/** @defgroup RNG_Group1 Initialization and Configuration functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] This section provides functions allowing to + (+) Initialize the RNG peripheral + (+) Enable or disable the RNG peripheral + +@endverbatim + * @{ + */ + +/** + * @brief De-initializes the RNG peripheral registers to their default reset values. + * @param None + * @retval None + */ +void RNG_DeInit(void) +{ + /* Enable RNG reset state */ + RCC_AHB2PeriphResetCmd(RCC_AHB2Periph_RNG, ENABLE); + + /* Release RNG from reset state */ + RCC_AHB2PeriphResetCmd(RCC_AHB2Periph_RNG, DISABLE); +} + +/** + * @brief Enables or disables the RNG peripheral. + * @param NewState: new state of the RNG peripheral. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RNG_Cmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the RNG */ + RNG->CR |= RNG_CR_RNGEN; + } + else + { + /* Disable the RNG */ + RNG->CR &= ~RNG_CR_RNGEN; + } +} +/** + * @} + */ + +/** @defgroup RNG_Group2 Get 32 bit Random number function + * @brief Get 32 bit Random number function + * + +@verbatim + =============================================================================== + ##### Get 32 bit Random number function ##### + =============================================================================== + [..] This section provides a function allowing to get the 32 bit Random number + + (@) Before to call this function you have to wait till DRDY flag is set, + using RNG_GetFlagStatus(RNG_FLAG_DRDY) function. + +@endverbatim + * @{ + */ + + +/** + * @brief Returns a 32-bit random number. + * + * @note Before to call this function you have to wait till DRDY (data ready) + * flag is set, using RNG_GetFlagStatus(RNG_FLAG_DRDY) function. + * @note Each time the the Random number data is read (using RNG_GetRandomNumber() + * function), the RNG_FLAG_DRDY flag is automatically cleared. + * @note In the case of a seed error, the generation of random numbers is + * interrupted for as long as the SECS bit is '1'. If a number is + * available in the RNG_DR register, it must not be used because it may + * not have enough entropy. In this case, it is recommended to clear the + * SEIS bit(using RNG_ClearFlag(RNG_FLAG_SECS) function), then disable + * and enable the RNG peripheral (using RNG_Cmd() function) to + * reinitialize and restart the RNG. + * @note In the case of a clock error, the RNG is no more able to generate + * random numbers because the PLL48CLK clock is not correct. User have + * to check that the clock controller is correctly configured to provide + * the RNG clock and clear the CEIS bit (using RNG_ClearFlag(RNG_FLAG_CECS) + * function) . The clock error has no impact on the previously generated + * random numbers, and the RNG_DR register contents can be used. + * + * @param None + * @retval 32-bit random number. + */ +uint32_t RNG_GetRandomNumber(void) +{ + /* Return the 32 bit random number from the DR register */ + return RNG->DR; +} + + +/** + * @} + */ + +/** @defgroup RNG_Group3 Interrupts and flags management functions + * @brief Interrupts and flags management functions + * +@verbatim + =============================================================================== + ##### Interrupts and flags management functions ##### + =============================================================================== + + [..] This section provides functions allowing to configure the RNG Interrupts and + to get the status and clear flags and Interrupts pending bits. + + [..] The RNG provides 3 Interrupts sources and 3 Flags: + + *** Flags : *** + =============== + [..] + (#) RNG_FLAG_DRDY : In the case of the RNG_DR register contains valid + random data. it is cleared by reading the valid data(using + RNG_GetRandomNumber() function). + + (#) RNG_FLAG_CECS : In the case of a seed error detection. + + (#) RNG_FLAG_SECS : In the case of a clock error detection. + + *** Interrupts *** + ================== + [..] If enabled, an RNG interrupt is pending : + + (#) In the case of the RNG_DR register contains valid random data. + This interrupt source is cleared once the RNG_DR register has been read + (using RNG_GetRandomNumber() function) until a new valid value is + computed; or + (#) In the case of a seed error : One of the following faulty sequences has + been detected: + (++) More than 64 consecutive bits at the same value (0 or 1) + (++) More than 32 consecutive alternance of 0 and 1 (0101010101...01) + This interrupt source is cleared using RNG_ClearITPendingBit(RNG_IT_SEI) + function; or + (#) In the case of a clock error : the PLL48CLK (RNG peripheral clock source) + was not correctly detected (fPLL48CLK< fHCLK/16). This interrupt source is + cleared using RNG_ClearITPendingBit(RNG_IT_CEI) function. + -@- note In this case, User have to check that the clock controller is + correctly configured to provide the RNG clock. + + *** Managing the RNG controller events : *** + ============================================ + [..] The user should identify which mode will be used in his application to manage + the RNG controller events: Polling mode or Interrupt mode. + + (#) In the Polling Mode it is advised to use the following functions: + (++) RNG_GetFlagStatus() : to check if flags events occur. + (++) RNG_ClearFlag() : to clear the flags events. + + -@@- RNG_FLAG_DRDY can not be cleared by RNG_ClearFlag(). it is cleared only + by reading the Random number data. + + (#) In the Interrupt Mode it is advised to use the following functions: + (++) RNG_ITConfig() : to enable or disable the interrupt source. + (++) RNG_GetITStatus() : to check if Interrupt occurs. + (++) RNG_ClearITPendingBit() : to clear the Interrupt pending Bit + (corresponding Flag). + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the RNG interrupt. + * @note The RNG provides 3 interrupt sources, + * - Computed data is ready event (DRDY), and + * - Seed error Interrupt (SEI) and + * - Clock error Interrupt (CEI), + * all these interrupts sources are enabled by setting the IE bit in + * CR register. However, each interrupt have its specific status bit + * (see RNG_GetITStatus() function) and clear bit except the DRDY event + * (see RNG_ClearITPendingBit() function). + * @param NewState: new state of the RNG interrupt. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RNG_ITConfig(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the RNG interrupt */ + RNG->CR |= RNG_CR_IE; + } + else + { + /* Disable the RNG interrupt */ + RNG->CR &= ~RNG_CR_IE; + } +} + +/** + * @brief Checks whether the specified RNG flag is set or not. + * @param RNG_FLAG: specifies the RNG flag to check. + * This parameter can be one of the following values: + * @arg RNG_FLAG_DRDY: Data Ready flag. + * @arg RNG_FLAG_CECS: Clock Error Current flag. + * @arg RNG_FLAG_SECS: Seed Error Current flag. + * @retval The new state of RNG_FLAG (SET or RESET). + */ +FlagStatus RNG_GetFlagStatus(uint8_t RNG_FLAG) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_RNG_GET_FLAG(RNG_FLAG)); + + /* Check the status of the specified RNG flag */ + if ((RNG->SR & RNG_FLAG) != (uint8_t)RESET) + { + /* RNG_FLAG is set */ + bitstatus = SET; + } + else + { + /* RNG_FLAG is reset */ + bitstatus = RESET; + } + /* Return the RNG_FLAG status */ + return bitstatus; +} + + +/** + * @brief Clears the RNG flags. + * @param RNG_FLAG: specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg RNG_FLAG_CECS: Clock Error Current flag. + * @arg RNG_FLAG_SECS: Seed Error Current flag. + * @note RNG_FLAG_DRDY can not be cleared by RNG_ClearFlag() function. + * This flag is cleared only by reading the Random number data (using + * RNG_GetRandomNumber() function). + * @retval None + */ +void RNG_ClearFlag(uint8_t RNG_FLAG) +{ + /* Check the parameters */ + assert_param(IS_RNG_CLEAR_FLAG(RNG_FLAG)); + /* Clear the selected RNG flags */ + RNG->SR = ~(uint32_t)(((uint32_t)RNG_FLAG) << 4); +} + +/** + * @brief Checks whether the specified RNG interrupt has occurred or not. + * @param RNG_IT: specifies the RNG interrupt source to check. + * This parameter can be one of the following values: + * @arg RNG_IT_CEI: Clock Error Interrupt. + * @arg RNG_IT_SEI: Seed Error Interrupt. + * @retval The new state of RNG_IT (SET or RESET). + */ +ITStatus RNG_GetITStatus(uint8_t RNG_IT) +{ + ITStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_RNG_GET_IT(RNG_IT)); + + /* Check the status of the specified RNG interrupt */ + if ((RNG->SR & RNG_IT) != (uint8_t)RESET) + { + /* RNG_IT is set */ + bitstatus = SET; + } + else + { + /* RNG_IT is reset */ + bitstatus = RESET; + } + /* Return the RNG_IT status */ + return bitstatus; +} + + +/** + * @brief Clears the RNG interrupt pending bit(s). + * @param RNG_IT: specifies the RNG interrupt pending bit(s) to clear. + * This parameter can be any combination of the following values: + * @arg RNG_IT_CEI: Clock Error Interrupt. + * @arg RNG_IT_SEI: Seed Error Interrupt. + * @retval None + */ +void RNG_ClearITPendingBit(uint8_t RNG_IT) +{ + /* Check the parameters */ + assert_param(IS_RNG_IT(RNG_IT)); + + /* Clear the selected RNG interrupt pending bit */ + RNG->SR = (uint8_t)~RNG_IT; +} +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm/lib/stm32f4xx_rng.h b/stm/lib/stm32f4xx_rng.h new file mode 100644 index 000000000..6de413c86 --- /dev/null +++ b/stm/lib/stm32f4xx_rng.h @@ -0,0 +1,120 @@ +/** + ****************************************************************************** + * @file stm32f4xx_rng.h + * @author MCD Application Team + * @version V1.1.0 + * @date 11-January-2013 + * @brief This file contains all the functions prototypes for the Random + * Number Generator(RNG) firmware library. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2013 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_RNG_H +#define __STM32F4xx_RNG_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup RNG + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup RNG_Exported_Constants + * @{ + */ + +/** @defgroup RNG_flags_definition + * @{ + */ +#define RNG_FLAG_DRDY ((uint8_t)0x0001) /*!< Data ready */ +#define RNG_FLAG_CECS ((uint8_t)0x0002) /*!< Clock error current status */ +#define RNG_FLAG_SECS ((uint8_t)0x0004) /*!< Seed error current status */ + +#define IS_RNG_GET_FLAG(RNG_FLAG) (((RNG_FLAG) == RNG_FLAG_DRDY) || \ + ((RNG_FLAG) == RNG_FLAG_CECS) || \ + ((RNG_FLAG) == RNG_FLAG_SECS)) +#define IS_RNG_CLEAR_FLAG(RNG_FLAG) (((RNG_FLAG) == RNG_FLAG_CECS) || \ + ((RNG_FLAG) == RNG_FLAG_SECS)) +/** + * @} + */ + +/** @defgroup RNG_interrupts_definition + * @{ + */ +#define RNG_IT_CEI ((uint8_t)0x20) /*!< Clock error interrupt */ +#define RNG_IT_SEI ((uint8_t)0x40) /*!< Seed error interrupt */ + +#define IS_RNG_IT(IT) ((((IT) & (uint8_t)0x9F) == 0x00) && ((IT) != 0x00)) +#define IS_RNG_GET_IT(RNG_IT) (((RNG_IT) == RNG_IT_CEI) || ((RNG_IT) == RNG_IT_SEI)) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/* Function used to set the RNG configuration to the default reset state *****/ +void RNG_DeInit(void); + +/* Configuration function *****************************************************/ +void RNG_Cmd(FunctionalState NewState); + +/* Get 32 bit Random number function ******************************************/ +uint32_t RNG_GetRandomNumber(void); + +/* Interrupts and flags management functions **********************************/ +void RNG_ITConfig(FunctionalState NewState); +FlagStatus RNG_GetFlagStatus(uint8_t RNG_FLAG); +void RNG_ClearFlag(uint8_t RNG_FLAG); +ITStatus RNG_GetITStatus(uint8_t RNG_IT); +void RNG_ClearITPendingBit(uint8_t RNG_IT); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32F4xx_RNG_H */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/