stmhal: Add support for FEZ Cerb40 II board from ghielectronics.com.
Dave Hylands
Damien George
parent
73533247cb
commit
d7f199465f
|
|
@ -0,0 +1,29 @@
|
|||
#define CERB40
|
||||
|
||||
#define MICROPY_HW_BOARD_NAME "Cerb40"
|
||||
#define MICROPY_HW_MCU_NAME "STM32F405RG"
|
||||
#define MICROPY_PY_SYS_PLATFORM "pyboard"
|
||||
|
||||
#define MICROPY_HW_HAS_SWITCH (0)
|
||||
#define MICROPY_HW_HAS_SDCARD (0)
|
||||
#define MICROPY_HW_HAS_MMA7660 (0)
|
||||
#define MICROPY_HW_HAS_LIS3DSH (0)
|
||||
#define MICROPY_HW_HAS_LCD (0)
|
||||
#define MICROPY_HW_ENABLE_RNG (1)
|
||||
#define MICROPY_HW_ENABLE_RTC (1)
|
||||
#define MICROPY_HW_ENABLE_TIMER (1)
|
||||
#define MICROPY_HW_ENABLE_SERVO (0)
|
||||
#define MICROPY_HW_ENABLE_DAC (1)
|
||||
#define MICROPY_HW_ENABLE_I2C1 (1)
|
||||
#define MICROPY_HW_ENABLE_SPI1 (1)
|
||||
#define MICROPY_HW_ENABLE_SPI2 (0)
|
||||
#define MICROPY_HW_ENABLE_SPI3 (1)
|
||||
#define MICROPY_HW_ENABLE_CAN (1)
|
||||
|
||||
// The Cerb40 has No LEDs
|
||||
|
||||
// The Cerb40 has No SDCard
|
||||
|
||||
// USB config
|
||||
//#define MICROPY_HW_USB_VBUS_DETECT_PIN (pin_A9)
|
||||
//#define MICROPY_HW_USB_OTG_ID_PIN (pin_A10)
|
||||
|
|
@ -0,0 +1,40 @@
|
|||
JP1,3.3V
|
||||
JP2,GND
|
||||
JP3,PA8
|
||||
JP4,PA13
|
||||
JP5,PA7
|
||||
JP6,PA6
|
||||
JP7,PC10
|
||||
JP8,PA14
|
||||
JP9,PC11
|
||||
JP10,PB4
|
||||
JP11,PB9
|
||||
JP12,PB3
|
||||
JP13,PD2
|
||||
JP14,PC12
|
||||
JP15,VBAT
|
||||
JP16,PB8
|
||||
JP17,Loader
|
||||
JP18,PB7
|
||||
JP19,PB6
|
||||
JP20,PB5
|
||||
JP21,Reset
|
||||
JP22,PC0
|
||||
JP23,PC1
|
||||
JP24,PC2
|
||||
JP25,PC3
|
||||
JP26,PA0
|
||||
JP27,PA1
|
||||
JP28,PA2
|
||||
JP29,PA3
|
||||
JP30,PA4
|
||||
JP31,PA5
|
||||
JP32,PB10
|
||||
JP33,PB11
|
||||
JP34,PB14
|
||||
JP35,PB15
|
||||
JP36,PC6
|
||||
JP37,PC7
|
||||
JP38,PC8
|
||||
JP39,PC9
|
||||
JP40,VUSB
|
||||
|
|
|
@ -0,0 +1,408 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_conf.h
|
||||
* @author MCD Application Team
|
||||
* @version V1.1.0
|
||||
* @date 19-June-2014
|
||||
* @brief HAL configuration file.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_HAL_CONF_H
|
||||
#define __STM32F4xx_HAL_CONF_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
#define STM32F405xx
|
||||
#define USE_USB_FS
|
||||
|
||||
/* ########################## Module Selection ############################## */
|
||||
/**
|
||||
* @brief This is the list of modules to be used in the HAL driver
|
||||
*/
|
||||
#define HAL_MODULE_ENABLED
|
||||
#define HAL_ADC_MODULE_ENABLED
|
||||
#define HAL_CAN_MODULE_ENABLED
|
||||
#define HAL_CRC_MODULE_ENABLED
|
||||
#define HAL_CRYP_MODULE_ENABLED
|
||||
#define HAL_DAC_MODULE_ENABLED
|
||||
//#define HAL_DCMI_MODULE_ENABLED
|
||||
#define HAL_DMA_MODULE_ENABLED
|
||||
/* #define HAL_DMA2D_MODULE_ENABLED */
|
||||
//#define HAL_ETH_MODULE_ENABLED
|
||||
#define HAL_FLASH_MODULE_ENABLED
|
||||
#define HAL_NAND_MODULE_ENABLED
|
||||
#define HAL_NOR_MODULE_ENABLED
|
||||
#define HAL_PCCARD_MODULE_ENABLED
|
||||
#define HAL_SRAM_MODULE_ENABLED
|
||||
/* #define HAL_SDRAM_MODULE_ENABLED */
|
||||
#define HAL_HASH_MODULE_ENABLED
|
||||
#define HAL_GPIO_MODULE_ENABLED
|
||||
#define HAL_I2C_MODULE_ENABLED
|
||||
#define HAL_I2S_MODULE_ENABLED
|
||||
#define HAL_IWDG_MODULE_ENABLED
|
||||
#define HAL_LTDC_MODULE_ENABLED
|
||||
#define HAL_PWR_MODULE_ENABLED
|
||||
#define HAL_RCC_MODULE_ENABLED
|
||||
#define HAL_RNG_MODULE_ENABLED
|
||||
#define HAL_RTC_MODULE_ENABLED
|
||||
/* #define HAL_SAI_MODULE_ENABLED */
|
||||
#define HAL_SD_MODULE_ENABLED
|
||||
#define HAL_SPI_MODULE_ENABLED
|
||||
#define HAL_TIM_MODULE_ENABLED
|
||||
#define HAL_UART_MODULE_ENABLED
|
||||
#define HAL_USART_MODULE_ENABLED
|
||||
#define HAL_IRDA_MODULE_ENABLED
|
||||
#define HAL_SMARTCARD_MODULE_ENABLED
|
||||
#define HAL_WWDG_MODULE_ENABLED
|
||||
#define HAL_CORTEX_MODULE_ENABLED
|
||||
#define HAL_PCD_MODULE_ENABLED
|
||||
#define HAL_HCD_MODULE_ENABLED
|
||||
|
||||
|
||||
/* ########################## HSE/HSI Values adaptation ##################### */
|
||||
/**
|
||||
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSE is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#if !defined (HSE_VALUE)
|
||||
#define HSE_VALUE ((uint32_t)12000000) /*!< Value of the External oscillator in Hz */
|
||||
#endif /* HSE_VALUE */
|
||||
|
||||
#if !defined (HSE_STARTUP_TIMEOUT)
|
||||
#define HSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for HSE start up, in ms */
|
||||
#endif /* HSE_STARTUP_TIMEOUT */
|
||||
|
||||
/**
|
||||
* @brief Internal High Speed oscillator (HSI) value.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSI is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#if !defined (HSI_VALUE)
|
||||
#define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
|
||||
#endif /* HSI_VALUE */
|
||||
|
||||
/**
|
||||
* @brief Internal Low Speed oscillator (LSI) value.
|
||||
*/
|
||||
#if !defined (LSI_VALUE)
|
||||
#define LSI_VALUE ((uint32_t)40000)
|
||||
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
|
||||
The real value may vary depending on the variations
|
||||
in voltage and temperature. */
|
||||
/**
|
||||
* @brief External Low Speed oscillator (LSE) value.
|
||||
*/
|
||||
#if !defined (LSE_VALUE)
|
||||
#define LSE_VALUE ((uint32_t)32768) /*!< Value of the External Low Speed oscillator in Hz */
|
||||
#endif /* LSE_VALUE */
|
||||
|
||||
/**
|
||||
* @brief External clock source for I2S peripheral
|
||||
* This value is used by the I2S HAL module to compute the I2S clock source
|
||||
* frequency, this source is inserted directly through I2S_CKIN pad.
|
||||
*/
|
||||
#if !defined (EXTERNAL_CLOCK_VALUE)
|
||||
#define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000) /*!< Value of the Internal oscillator in Hz*/
|
||||
#endif /* EXTERNAL_CLOCK_VALUE */
|
||||
|
||||
/* Tip: To avoid modifying this file each time you need to use different HSE,
|
||||
=== you can define the HSE value in your toolchain compiler preprocessor. */
|
||||
|
||||
/* ########################### System Configuration ######################### */
|
||||
/**
|
||||
* @brief This is the HAL system configuration section
|
||||
*/
|
||||
#define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */
|
||||
#define TICK_INT_PRIORITY ((uint32_t)0x00) /*!< tick interrupt priority */
|
||||
#define USE_RTOS 0
|
||||
#define PREFETCH_ENABLE 1
|
||||
#define INSTRUCTION_CACHE_ENABLE 1
|
||||
#define DATA_CACHE_ENABLE 1
|
||||
|
||||
/* ########################## Assert Selection ############################## */
|
||||
/**
|
||||
* @brief Uncomment the line below to expanse the "assert_param" macro in the
|
||||
* HAL drivers code
|
||||
*/
|
||||
/* #define USE_FULL_ASSERT 1 */
|
||||
|
||||
/* ################## Ethernet peripheral configuration ##################### */
|
||||
|
||||
/* Section 1 : Ethernet peripheral configuration */
|
||||
|
||||
/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
|
||||
#define MAC_ADDR0 2
|
||||
#define MAC_ADDR1 0
|
||||
#define MAC_ADDR2 0
|
||||
#define MAC_ADDR3 0
|
||||
#define MAC_ADDR4 0
|
||||
#define MAC_ADDR5 0
|
||||
|
||||
/* Definition of the Ethernet driver buffers size and count */
|
||||
#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
|
||||
#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
|
||||
#define ETH_RXBUFNB ((uint32_t)4) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
|
||||
#define ETH_TXBUFNB ((uint32_t)4) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
|
||||
|
||||
/* Section 2: PHY configuration section */
|
||||
|
||||
/* DP83848 PHY Address*/
|
||||
#define DP83848_PHY_ADDRESS 0x01
|
||||
/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
|
||||
#define PHY_RESET_DELAY ((uint32_t)0x000000FF)
|
||||
/* PHY Configuration delay */
|
||||
#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFF)
|
||||
|
||||
#define PHY_READ_TO ((uint32_t)0x0000FFFF)
|
||||
#define PHY_WRITE_TO ((uint32_t)0x0000FFFF)
|
||||
|
||||
/* Section 3: Common PHY Registers */
|
||||
|
||||
#define PHY_BCR ((uint16_t)0x00) /*!< Transceiver Basic Control Register */
|
||||
#define PHY_BSR ((uint16_t)0x01) /*!< Transceiver Basic Status Register */
|
||||
|
||||
#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */
|
||||
#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */
|
||||
#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */
|
||||
#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */
|
||||
#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */
|
||||
#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */
|
||||
#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */
|
||||
#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */
|
||||
#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */
|
||||
#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */
|
||||
|
||||
#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */
|
||||
#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */
|
||||
#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */
|
||||
|
||||
/* Section 4: Extended PHY Registers */
|
||||
|
||||
#define PHY_SR ((uint16_t)0x10) /*!< PHY status register Offset */
|
||||
#define PHY_MICR ((uint16_t)0x11) /*!< MII Interrupt Control Register */
|
||||
#define PHY_MISR ((uint16_t)0x12) /*!< MII Interrupt Status and Misc. Control Register */
|
||||
|
||||
#define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */
|
||||
#define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */
|
||||
#define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */
|
||||
|
||||
#define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */
|
||||
#define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */
|
||||
|
||||
#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */
|
||||
#define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
/**
|
||||
* @brief Include module's header file
|
||||
*/
|
||||
|
||||
#ifdef HAL_RCC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_rcc.h"
|
||||
#endif /* HAL_RCC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_GPIO_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_gpio.h"
|
||||
#endif /* HAL_GPIO_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DMA_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dma.h"
|
||||
#endif /* HAL_DMA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CORTEX_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_cortex.h"
|
||||
#endif /* HAL_CORTEX_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_ADC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_adc.h"
|
||||
#endif /* HAL_ADC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CAN_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_can.h"
|
||||
#endif /* HAL_CAN_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CRC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_crc.h"
|
||||
#endif /* HAL_CRC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CRYP_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_cryp.h"
|
||||
#endif /* HAL_CRYP_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DMA2D_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dma2d.h"
|
||||
#endif /* HAL_DMA2D_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DAC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dac.h"
|
||||
#endif /* HAL_DAC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DCMI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dcmi.h"
|
||||
#endif /* HAL_DCMI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_ETH_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_eth.h"
|
||||
#endif /* HAL_ETH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_FLASH_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_flash.h"
|
||||
#endif /* HAL_FLASH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SRAM_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_sram.h"
|
||||
#endif /* HAL_SRAM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_NOR_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_nor.h"
|
||||
#endif /* HAL_NOR_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_NAND_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_nand.h"
|
||||
#endif /* HAL_NAND_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PCCARD_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_pccard.h"
|
||||
#endif /* HAL_PCCARD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SDRAM_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_sdram.h"
|
||||
#endif /* HAL_SDRAM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_HASH_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_hash.h"
|
||||
#endif /* HAL_HASH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_I2C_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_i2c.h"
|
||||
#endif /* HAL_I2C_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_I2S_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_i2s.h"
|
||||
#endif /* HAL_I2S_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IWDG_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_iwdg.h"
|
||||
#endif /* HAL_IWDG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_LTDC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_ltdc.h"
|
||||
#endif /* HAL_LTDC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PWR_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_pwr.h"
|
||||
#endif /* HAL_PWR_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_RNG_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_rng.h"
|
||||
#endif /* HAL_RNG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_RTC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_rtc.h"
|
||||
#endif /* HAL_RTC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SAI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_sai.h"
|
||||
#endif /* HAL_SAI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SD_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_sd.h"
|
||||
#endif /* HAL_SD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_spi.h"
|
||||
#endif /* HAL_SPI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_TIM_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_tim.h"
|
||||
#endif /* HAL_TIM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_uart.h"
|
||||
#endif /* HAL_UART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_USART_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_usart.h"
|
||||
#endif /* HAL_USART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IRDA_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_irda.h"
|
||||
#endif /* HAL_IRDA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SMARTCARD_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_smartcard.h"
|
||||
#endif /* HAL_SMARTCARD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_WWDG_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_wwdg.h"
|
||||
#endif /* HAL_WWDG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PCD_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_pcd.h"
|
||||
#endif /* HAL_PCD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_HCD_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_hcd.h"
|
||||
#endif /* HAL_HCD_MODULE_ENABLED */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
#ifdef USE_FULL_ASSERT
|
||||
/**
|
||||
* @brief The assert_param macro is used for function's parameters check.
|
||||
* @param expr: If expr is false, it calls assert_failed function
|
||||
* which reports the name of the source file and the source
|
||||
* line number of the call that failed.
|
||||
* If expr is true, it returns no value.
|
||||
* @retval None
|
||||
*/
|
||||
#define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
void assert_failed(uint8_t* file, uint32_t line);
|
||||
#else
|
||||
#define assert_param(expr) ((void)0)
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F4xx_HAL_CONF_H */
|
||||
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -15,6 +15,7 @@
|
|||
#define MICROPY_HW_ENABLE_DAC (1)
|
||||
#define MICROPY_HW_ENABLE_I2C1 (1)
|
||||
#define MICROPY_HW_ENABLE_SPI1 (1)
|
||||
#define MICROPY_HW_ENABLE_SPI2 (1)
|
||||
#define MICROPY_HW_ENABLE_SPI3 (1)
|
||||
#define MICROPY_HW_ENABLE_CAN (0)
|
||||
|
||||
|
|
|
|||
|
|
@ -19,6 +19,7 @@
|
|||
#define MICROPY_HW_ENABLE_DAC (0)
|
||||
#define MICROPY_HW_ENABLE_I2C1 (0)
|
||||
#define MICROPY_HW_ENABLE_SPI1 (0)
|
||||
#define MICROPY_HW_ENABLE_SPI2 (1)
|
||||
#define MICROPY_HW_ENABLE_SPI3 (0)
|
||||
#define MICROPY_HW_ENABLE_CAN (0)
|
||||
|
||||
|
|
|
|||
|
|
@ -16,6 +16,7 @@
|
|||
#define MICROPY_HW_ENABLE_DAC (1)
|
||||
#define MICROPY_HW_ENABLE_I2C1 (1)
|
||||
#define MICROPY_HW_ENABLE_SPI1 (1)
|
||||
#define MICROPY_HW_ENABLE_SPI2 (1)
|
||||
#define MICROPY_HW_ENABLE_SPI3 (0)
|
||||
#define MICROPY_HW_ENABLE_CAN (1)
|
||||
|
||||
|
|
|
|||
|
|
@ -15,6 +15,7 @@
|
|||
#define MICROPY_HW_ENABLE_DAC (1)
|
||||
#define MICROPY_HW_ENABLE_I2C1 (1)
|
||||
#define MICROPY_HW_ENABLE_SPI1 (1)
|
||||
#define MICROPY_HW_ENABLE_SPI2 (1)
|
||||
#define MICROPY_HW_ENABLE_SPI3 (0)
|
||||
#define MICROPY_HW_ENABLE_CAN (1)
|
||||
|
||||
|
|
|
|||
|
|
@ -15,6 +15,7 @@
|
|||
#define MICROPY_HW_ENABLE_DAC (1)
|
||||
#define MICROPY_HW_ENABLE_I2C1 (1)
|
||||
#define MICROPY_HW_ENABLE_SPI1 (1)
|
||||
#define MICROPY_HW_ENABLE_SPI2 (1)
|
||||
#define MICROPY_HW_ENABLE_SPI3 (0)
|
||||
#define MICROPY_HW_ENABLE_CAN (1)
|
||||
|
||||
|
|
|
|||
|
|
@ -15,6 +15,7 @@
|
|||
#define MICROPY_HW_ENABLE_DAC (1)
|
||||
#define MICROPY_HW_ENABLE_I2C1 (1)
|
||||
#define MICROPY_HW_ENABLE_SPI1 (1)
|
||||
#define MICROPY_HW_ENABLE_SPI2 (1)
|
||||
#define MICROPY_HW_ENABLE_SPI3 (0)
|
||||
#define MICROPY_HW_ENABLE_CAN (1)
|
||||
|
||||
|
|
|
|||
13
stmhal/led.c
13
stmhal/led.c
|
|
@ -34,6 +34,8 @@
|
|||
#include "pin.h"
|
||||
#include "genhdr/pins.h"
|
||||
|
||||
#if defined(MICROPY_HW_LED1)
|
||||
|
||||
/// \moduleref pyb
|
||||
/// \class LED - LED object
|
||||
///
|
||||
|
|
@ -292,3 +294,14 @@ const mp_obj_type_t pyb_led_type = {
|
|||
.make_new = led_obj_make_new,
|
||||
.locals_dict = (mp_obj_t)&led_locals_dict,
|
||||
};
|
||||
|
||||
#else
|
||||
// For boards with no LEDs, we leave an empty function here so that we don't
|
||||
// have to put conditionals everywhere.
|
||||
void led_init(void) {
|
||||
}
|
||||
void led_state(pyb_led_t led, int state) {
|
||||
}
|
||||
void led_toggle(pyb_led_t led) {
|
||||
}
|
||||
#endif // defined(MICROPY_HW_LED1)
|
||||
|
|
|
|||
|
|
@ -573,7 +573,9 @@ STATIC const mp_map_elem_t pyb_module_globals_table[] = {
|
|||
{ MP_OBJ_NEW_QSTR(MP_QSTR_SD), (mp_obj_t)&pyb_sdcard_obj },
|
||||
#endif
|
||||
|
||||
#if defined(MICROPY_HW_LED1)
|
||||
{ MP_OBJ_NEW_QSTR(MP_QSTR_LED), (mp_obj_t)&pyb_led_type },
|
||||
#endif
|
||||
{ MP_OBJ_NEW_QSTR(MP_QSTR_I2C), (mp_obj_t)&pyb_i2c_type },
|
||||
{ MP_OBJ_NEW_QSTR(MP_QSTR_SPI), (mp_obj_t)&pyb_spi_type },
|
||||
{ MP_OBJ_NEW_QSTR(MP_QSTR_UART), (mp_obj_t)&pyb_uart_type },
|
||||
|
|
|
|||
14
stmhal/spi.c
14
stmhal/spi.c
|
|
@ -63,7 +63,9 @@
|
|||
#if MICROPY_HW_ENABLE_SPI1
|
||||
SPI_HandleTypeDef SPIHandle1 = {.Instance = NULL};
|
||||
#endif
|
||||
#if MICROPY_HW_ENABLE_SPI2
|
||||
SPI_HandleTypeDef SPIHandle2 = {.Instance = NULL};
|
||||
#endif
|
||||
#if MICROPY_HW_ENABLE_SPI3
|
||||
SPI_HandleTypeDef SPIHandle3 = {.Instance = NULL};
|
||||
#endif
|
||||
|
|
@ -110,10 +112,12 @@ void SPI1_RX_DMA_IRQ_HANDLER(void) { HAL_DMA_IRQHandler(&spi1_rx_dma_handle); }
|
|||
void SPI1_TX_DMA_IRQ_HANDLER(void) { HAL_DMA_IRQHandler(&spi1_tx_dma_handle); }
|
||||
#endif
|
||||
|
||||
#if MICROPY_HW_ENABLE_SPI2
|
||||
STATIC DMA_HandleTypeDef spi2_rx_dma_handle;
|
||||
STATIC DMA_HandleTypeDef spi2_tx_dma_handle;
|
||||
void SPI2_RX_DMA_IRQ_HANDLER(void) { HAL_DMA_IRQHandler(&spi2_rx_dma_handle); }
|
||||
void SPI2_TX_DMA_IRQ_HANDLER(void) { HAL_DMA_IRQHandler(&spi2_tx_dma_handle); }
|
||||
#endif
|
||||
|
||||
#if MICROPY_HW_ENABLE_SPI3
|
||||
STATIC DMA_HandleTypeDef spi3_rx_dma_handle;
|
||||
|
|
@ -128,8 +132,10 @@ void spi_init0(void) {
|
|||
memset(&SPIHandle1, 0, sizeof(SPI_HandleTypeDef));
|
||||
SPIHandle1.Instance = SPI1;
|
||||
#endif
|
||||
#if MICROPY_HW_ENABLE_SPI2
|
||||
memset(&SPIHandle2, 0, sizeof(SPI_HandleTypeDef));
|
||||
SPIHandle2.Instance = SPI2;
|
||||
#endif
|
||||
#if MICROPY_HW_ENABLE_SPI3
|
||||
memset(&SPIHandle3, 0, sizeof(SPI_HandleTypeDef));
|
||||
SPIHandle3.Instance = SPI3;
|
||||
|
|
@ -169,6 +175,7 @@ void spi_init(SPI_HandleTypeDef *spi, bool enable_nss_pin) {
|
|||
rx_dma_irqn = SPI1_RX_DMA_IRQN;
|
||||
tx_dma_irqn = SPI1_TX_DMA_IRQN;
|
||||
#endif
|
||||
#if MICROPY_HW_ENABLE_SPI2
|
||||
} else if (spi->Instance == SPI2) {
|
||||
// Y-skin: Y5=PB12=SPI2_NSS, Y6=PB13=SPI2_SCK, Y7=PB14=SPI2_MISO, Y8=PB15=SPI2_MOSI
|
||||
pins[0] = &pin_B12;
|
||||
|
|
@ -187,6 +194,7 @@ void spi_init(SPI_HandleTypeDef *spi, bool enable_nss_pin) {
|
|||
tx_dma = &spi2_tx_dma_handle;
|
||||
rx_dma_irqn = SPI2_RX_DMA_IRQN;
|
||||
tx_dma_irqn = SPI2_TX_DMA_IRQN;
|
||||
#endif
|
||||
#if MICROPY_HW_ENABLE_SPI3
|
||||
} else if (spi->Instance == SPI3) {
|
||||
pins[0] = &pin_A4;
|
||||
|
|
@ -266,10 +274,12 @@ void spi_deinit(SPI_HandleTypeDef *spi) {
|
|||
__SPI1_RELEASE_RESET();
|
||||
__SPI1_CLK_DISABLE();
|
||||
#endif
|
||||
#if MICROPY_HW_ENABLE_SPI2
|
||||
} else if (spi->Instance == SPI2) {
|
||||
__SPI2_FORCE_RESET();
|
||||
__SPI2_RELEASE_RESET();
|
||||
__SPI2_CLK_DISABLE();
|
||||
#endif
|
||||
#if MICROPY_HW_ENABLE_SPI3
|
||||
} else if (spi->Instance == SPI3) {
|
||||
__SPI3_FORCE_RESET();
|
||||
|
|
@ -304,7 +314,11 @@ STATIC const pyb_spi_obj_t pyb_spi_obj[] = {
|
|||
#else
|
||||
{{&pyb_spi_type}, NULL},
|
||||
#endif
|
||||
#if MICROPY_HW_ENABLE_SPI2
|
||||
{{&pyb_spi_type}, &SPIHandle2},
|
||||
#else
|
||||
{{&pyb_spi_type}, NULL},
|
||||
#endif
|
||||
#if MICROPY_HW_ENABLE_SPI3
|
||||
{{&pyb_spi_type}, &SPIHandle3},
|
||||
#else
|
||||
|
|
|
|||
Loading…
Reference in New Issue