/* * This file is part of the MicroPython project, http://micropython.org/ * * The MIT License (MIT) * * Copyright (c) 2018 Ayke van Laethem * Copyright (c) 2019 Jim Mussared * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN * THE SOFTWARE. */ #ifndef MICROPY_INCLUDED_EXTMOD_MODBLUETOOTH_H #define MICROPY_INCLUDED_EXTMOD_MODBLUETOOTH_H #include #include "py/obj.h" #include "py/objlist.h" #include "py/ringbuf.h" // Port specific configuration. #ifndef MICROPY_PY_BLUETOOTH_RINGBUF_SIZE #define MICROPY_PY_BLUETOOTH_RINGBUF_SIZE (128) #endif #ifndef MICROPY_PY_BLUETOOTH_ENABLE_CENTRAL_MODE #define MICROPY_PY_BLUETOOTH_ENABLE_CENTRAL_MODE (0) #endif #ifndef MICROPY_PY_BLUETOOTH_GATTS_ON_READ_CALLBACK #define MICROPY_PY_BLUETOOTH_GATTS_ON_READ_CALLBACK (0) #endif // This is used to protect the ringbuffer. #ifndef MICROPY_PY_BLUETOOTH_ENTER #define MICROPY_PY_BLUETOOTH_ENTER mp_uint_t atomic_state = MICROPY_BEGIN_ATOMIC_SECTION(); #define MICROPY_PY_BLUETOOTH_EXIT MICROPY_END_ATOMIC_SECTION(atomic_state); #endif // Common constants. #ifndef MP_BLUETOOTH_MAX_ATTR_SIZE #define MP_BLUETOOTH_MAX_ATTR_SIZE (20) #endif // Advertisement packet lengths #define MP_BLUETOOTH_GAP_ADV_MAX_LEN (32) #define MP_BLUETOOTH_CHARACTERISTIC_FLAG_READ (1 << 1) #define MP_BLUETOOTH_CHARACTERISTIC_FLAG_WRITE (1 << 3) #define MP_BLUETOOTH_CHARACTERISTIC_FLAG_NOTIFY (1 << 4) // For mp_bluetooth_gattc_write, the mode parameter #define MP_BLUETOOTH_WRITE_MODE_NO_RESPONSE (0) #define MP_BLUETOOTH_WRITE_MODE_WITH_RESPONSE (1) // Type value also doubles as length. #define MP_BLUETOOTH_UUID_TYPE_16 (2) #define MP_BLUETOOTH_UUID_TYPE_32 (4) #define MP_BLUETOOTH_UUID_TYPE_128 (16) // Address types (for the addr_type params). // Ports will need to map these to their own values. #define MP_BLUETOOTH_ADDR_PUBLIC (0x00) // Public (identity) address. (Same as NimBLE and NRF SD) #define MP_BLUETOOTH_ADDR_RANDOM_STATIC (0x01) // Random static (identity) address. (Same as NimBLE and NRF SD) #define MP_BLUETOOTH_ADDR_PUBLIC_ID (0x02) // (Same as NimBLE) #define MP_BLUETOOTH_ADDR_RANDOM_ID (0x03) // (Same as NimBLE) #define MP_BLUETOOTH_ADDR_RANDOM_PRIVATE_RESOLVABLE (0x12) // Random private resolvable address. (NRF SD 0x02) #define MP_BLUETOOTH_ADDR_RANDOM_PRIVATE_NON_RESOLVABLE (0x13) // Random private non-resolvable address. (NRF SD 0x03) // Event codes for the IRQ handler. // Can also be combined to pass to the trigger param to select which events you // are interested in. // Note this is currently stored in a uint16_t (in irq_trigger, and the event // arg to the irq handler), so one spare value remaining. #define MP_BLUETOOTH_IRQ_CENTRAL_CONNECT (1 << 0) #define MP_BLUETOOTH_IRQ_CENTRAL_DISCONNECT (1 << 1) #define MP_BLUETOOTH_IRQ_GATTS_WRITE (1 << 2) #define MP_BLUETOOTH_IRQ_GATTS_READ_REQUEST (1 << 3) #define MP_BLUETOOTH_IRQ_SCAN_RESULT (1 << 4) #define MP_BLUETOOTH_IRQ_SCAN_COMPLETE (1 << 5) #define MP_BLUETOOTH_IRQ_PERIPHERAL_CONNECT (1 << 6) #define MP_BLUETOOTH_IRQ_PERIPHERAL_DISCONNECT (1 << 7) #define MP_BLUETOOTH_IRQ_GATTC_SERVICE_RESULT (1 << 8) #define MP_BLUETOOTH_IRQ_GATTC_CHARACTERISTIC_RESULT (1 << 9) #define MP_BLUETOOTH_IRQ_GATTC_DESCRIPTOR_RESULT (1 << 10) #define MP_BLUETOOTH_IRQ_GATTC_READ_RESULT (1 << 11) #define MP_BLUETOOTH_IRQ_GATTC_WRITE_STATUS (1 << 12) #define MP_BLUETOOTH_IRQ_GATTC_NOTIFY (1 << 13) #define MP_BLUETOOTH_IRQ_GATTC_INDICATE (1 << 14) #define MP_BLUETOOTH_IRQ_ALL (0xffff) /* These aren't included in the module for space reasons, but can be used in your Python code if necessary. from micropython import const _IRQ_CENTRAL_CONNECT = const(1 << 0) _IRQ_CENTRAL_DISCONNECT = const(1 << 1) _IRQ_GATTS_WRITE = const(1 << 2) _IRQ_GATTS_READ_REQUEST = const(1 << 3) _IRQ_SCAN_RESULT = const(1 << 4) _IRQ_SCAN_COMPLETE = const(1 << 5) _IRQ_PERIPHERAL_CONNECT = const(1 << 6) _IRQ_PERIPHERAL_DISCONNECT = const(1 << 7) _IRQ_GATTC_SERVICE_RESULT = const(1 << 8) _IRQ_GATTC_CHARACTERISTIC_RESULT = const(1 << 9) _IRQ_GATTC_DESCRIPTOR_RESULT = const(1 << 10) _IRQ_GATTC_READ_RESULT = const(1 << 11) _IRQ_GATTC_WRITE_STATUS = const(1 << 12) _IRQ_GATTC_NOTIFY = const(1 << 13) _IRQ_GATTC_INDICATE = const(1 << 14) _IRQ_ALL = const(0xffff) */ // Common UUID type. // Ports are expected to map this to their own internal UUID types. // Internally the UUID data is little-endian, but the user should only // ever see this if they use the buffer protocol, e.g. in order to // construct an advertising payload (which needs to be in LE). // Both the constructor and the print function work in BE. typedef struct { mp_obj_base_t base; uint8_t type; uint8_t data[16]; } mp_obj_bluetooth_uuid_t; ////////////////////////////////////////////////////////////// // API implemented by ports (i.e. called from modbluetooth.c): // TODO: At the moment this only allows for a single `Bluetooth` instance to be created. // Ideally in the future we'd be able to have multiple instances or to select a specific BT driver or HCI UART. // So these global methods should be replaced with a struct of function pointers (like the machine.I2C implementations). // Any method returning an int returns errno on failure, otherwise zero. // Note: All methods dealing with addresses (as 6-byte uint8 pointers) are in big-endian format. // (i.e. the same way they would be printed on a device sticker or in a UI), so the user sees // addresses in a way that looks like what they'd expect. // This means that the lower level implementation will likely need to reorder them (e.g. Nimble // works in little-endian, as does BLE itself). // Enables the Bluetooth stack. int mp_bluetooth_init(void); // Disables the Bluetooth stack. Is a no-op when not enabled. void mp_bluetooth_deinit(void); // Returns true when the Bluetooth stack is enabled. bool mp_bluetooth_is_enabled(void); // Gets the MAC addr of this device in big-endian format. void mp_bluetooth_get_device_addr(uint8_t *addr); // Start advertisement. Will re-start advertisement when already enabled. // Returns errno on failure. int mp_bluetooth_gap_advertise_start(bool connectable, int32_t interval_us, const uint8_t *adv_data, size_t adv_data_len, const uint8_t *sr_data, size_t sr_data_len); // Stop advertisement. No-op when already stopped. void mp_bluetooth_gap_advertise_stop(void); // Start adding services. Must be called before mp_bluetooth_register_service. int mp_bluetooth_gatts_register_service_begin(bool append); // // Add a service with the given list of characteristics to the queue to be registered. // The value_handles won't be valid until after mp_bluetooth_register_service_end is called. int mp_bluetooth_gatts_register_service(mp_obj_bluetooth_uuid_t *service_uuid, mp_obj_bluetooth_uuid_t **characteristic_uuids, uint8_t *characteristic_flags, mp_obj_bluetooth_uuid_t **descriptor_uuids, uint8_t *descriptor_flags, uint8_t *num_descriptors, uint16_t *handles, size_t num_characteristics); // Register any queued services. int mp_bluetooth_gatts_register_service_end(); // Read the value from the local gatts db (likely this has been written by a central). int mp_bluetooth_gatts_read(uint16_t value_handle, uint8_t **value, size_t *value_len); // Write a value to the local gatts db (ready to be queried by a central). int mp_bluetooth_gatts_write(uint16_t value_handle, const uint8_t *value, size_t value_len); // Notify the central that it should do a read. int mp_bluetooth_gatts_notify(uint16_t conn_handle, uint16_t value_handle); // Notify the central, including a data payload. (Note: does not set the gatts db value). int mp_bluetooth_gatts_notify_send(uint16_t conn_handle, uint16_t value_handle, const uint8_t *value, size_t *value_len); // Indicate the central. int mp_bluetooth_gatts_indicate(uint16_t conn_handle, uint16_t value_handle); // Resize and enable/disable append-mode on a value. // Append-mode means that remote writes will append and local reads will clear after reading. int mp_bluetooth_gatts_set_buffer(uint16_t value_handle, size_t len, bool append); // Disconnect from a central or peripheral. int mp_bluetooth_gap_disconnect(uint16_t conn_handle); #if MICROPY_PY_BLUETOOTH_ENABLE_CENTRAL_MODE // Start a discovery (scan). Set duration to zero to run continuously. int mp_bluetooth_gap_scan_start(int32_t duration_ms, int32_t interval_us, int32_t window_us); // Stop discovery (if currently active). int mp_bluetooth_gap_scan_stop(void); // Connect to a found peripheral. int mp_bluetooth_gap_peripheral_connect(uint8_t addr_type, const uint8_t *addr, int32_t duration_ms); // Find all primary services on the connected peripheral. int mp_bluetooth_gattc_discover_primary_services(uint16_t conn_handle); // Find all characteristics on the specified service on a connected peripheral. int mp_bluetooth_gattc_discover_characteristics(uint16_t conn_handle, uint16_t start_handle, uint16_t end_handle); // Find all descriptors on the specified characteristic on a connected peripheral. int mp_bluetooth_gattc_discover_descriptors(uint16_t conn_handle, uint16_t start_handle, uint16_t end_handle); // Initiate read of a value from the remote peripheral. int mp_bluetooth_gattc_read(uint16_t conn_handle, uint16_t value_handle); // Write the value to the remote peripheral. int mp_bluetooth_gattc_write(uint16_t conn_handle, uint16_t value_handle, const uint8_t *value, size_t *value_len, unsigned int mode); #endif ///////////////////////////////////////////////////////////////////////////// // API implemented by modbluetooth (called by port-specific implementations): // Notify modbluetooth that a connection/disconnection event has occurred. void mp_bluetooth_gap_on_connected_disconnected(uint16_t event, uint16_t conn_handle, uint8_t addr_type, const uint8_t *addr); // Call this when a characteristic is written to. void mp_bluetooth_gatts_on_write(uint16_t conn_handle, uint16_t value_handle); #if MICROPY_PY_BLUETOOTH_GATTS_ON_READ_CALLBACK // Call this when a characteristic is read from. Return false to deny the read. bool mp_bluetooth_gatts_on_read_request(uint16_t conn_handle, uint16_t value_handle); #endif #if MICROPY_PY_BLUETOOTH_ENABLE_CENTRAL_MODE // Notify modbluetooth that scan has finished, either timeout, manually, or by some other action (e.g. connecting). void mp_bluetooth_gap_on_scan_complete(void); // Notify modbluetooth of a scan result. void mp_bluetooth_gap_on_scan_result(uint8_t addr_type, const uint8_t *addr, bool connectable, const int8_t rssi, const uint8_t *data, size_t data_len); // Notify modbluetooth that a service was found (either by discover-all, or discover-by-uuid). void mp_bluetooth_gattc_on_primary_service_result(uint16_t conn_handle, uint16_t start_handle, uint16_t end_handle, mp_obj_bluetooth_uuid_t *service_uuid); // Notify modbluetooth that a characteristic was found (either by discover-all-on-service, or discover-by-uuid-on-service). void mp_bluetooth_gattc_on_characteristic_result(uint16_t conn_handle, uint16_t def_handle, uint16_t value_handle, uint8_t properties, mp_obj_bluetooth_uuid_t *characteristic_uuid); // Notify modbluetooth that a descriptor was found. void mp_bluetooth_gattc_on_descriptor_result(uint16_t conn_handle, uint16_t handle, mp_obj_bluetooth_uuid_t *descriptor_uuid); // Notify modbluetooth that a read has completed with data (or notify/indicate data available, use `event` to disambiguate). // Note: these functions are to be called in a group protected by MICROPY_PY_BLUETOOTH_ENTER/EXIT. // _start returns the number of bytes to submit to the calls to _chunk, followed by a call to _end. size_t mp_bluetooth_gattc_on_data_available_start(uint16_t event, uint16_t conn_handle, uint16_t value_handle, size_t data_len); void mp_bluetooth_gattc_on_data_available_chunk(const uint8_t *data, size_t data_len); void mp_bluetooth_gattc_on_data_available_end(void); // Notify modbluetooth that a write has completed. void mp_bluetooth_gattc_on_write_status(uint16_t conn_handle, uint16_t value_handle, uint16_t status); #endif #endif // MICROPY_INCLUDED_EXTMOD_MODBLUETOOTH_H