micropython/ports/cc3200/hal/startup_gcc.c

422 lines
16 KiB
C

//*****************************************************************************
// startup_gcc.c
//
// Startup code for use with GCC.
//
// Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
//
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions
// are met:
//
// Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
//
// Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the
// distribution.
//
// Neither the name of Texas Instruments Incorporated nor the names of
// its contributors may be used to endorse or promote products derived
// from this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
//*****************************************************************************
#include <stdint.h>
#include "inc/hw_nvic.h"
#include "inc/hw_types.h"
#include "fault_registers.h"
//*****************************************************************************
//
// The following are constructs created by the linker, indicating where the
// the "data" and "bss" segments reside in memory. The initializers for the
// for the "data" segment resides immediately following the "text" segment.
//
//*****************************************************************************
extern uint32_t _data;
extern uint32_t _edata;
extern uint32_t _bss;
extern uint32_t _ebss;
extern uint32_t _estack;
//*****************************************************************************
//
// Forward declaration of the default fault handlers.
//
//*****************************************************************************
#ifndef BOOTLOADER
__attribute__ ((section (".boot")))
#endif
void ResetISR(void);
#ifdef DEBUG
static void NmiSR(void) __attribute__( ( naked ) );
static void FaultISR( void ) __attribute__( ( naked ) );
void HardFault_HandlerC(uint32_t *pulFaultStackAddress);
static void BusFaultHandler(void) __attribute__( ( naked ) );
#endif
static void IntDefaultHandler(void) __attribute__( ( naked ) );
//*****************************************************************************
//
// External declaration for the freeRTOS handlers
//
//*****************************************************************************
#ifdef USE_FREERTOS
extern void vPortSVCHandler(void);
extern void xPortPendSVHandler(void);
extern void xPortSysTickHandler(void);
#endif
//*****************************************************************************
//
// The entry point for the application.
//
//*****************************************************************************
extern int main(void);
//*****************************************************************************
//
// The vector table. Note that the proper constructs must be placed on this to
// ensure that it ends up at physical address 0x0000.0000.
//
//*****************************************************************************
__attribute__ ((section(".intvecs")))
void (* const g_pfnVectors[256])(void) =
{
(void (*)(void))((uint32_t)&_estack), // The initial stack pointer
ResetISR, // The reset handler
#ifdef DEBUG
NmiSR, // The NMI handler
FaultISR, // The hard fault handler
#else
IntDefaultHandler, // The NMI handler
IntDefaultHandler, // The hard fault handler
#endif
IntDefaultHandler, // The MPU fault handler
#ifdef DEBUG
BusFaultHandler, // The bus fault handler
#else
IntDefaultHandler, // The bus fault handler
#endif
IntDefaultHandler, // The usage fault handler
0, // Reserved
0, // Reserved
0, // Reserved
0, // Reserved
#ifdef USE_FREERTOS
vPortSVCHandler, // SVCall handler
#else
IntDefaultHandler, // SVCall handler
#endif
IntDefaultHandler, // Debug monitor handler
0, // Reserved
#ifdef USE_FREERTOS
xPortPendSVHandler, // The PendSV handler
xPortSysTickHandler, // The SysTick handler
#else
IntDefaultHandler, // The PendSV handler
IntDefaultHandler, // The SysTick handler
#endif
IntDefaultHandler, // GPIO Port A
IntDefaultHandler, // GPIO Port B
IntDefaultHandler, // GPIO Port C
IntDefaultHandler, // GPIO Port D
0, // Reserved
IntDefaultHandler, // UART0 Rx and Tx
IntDefaultHandler, // UART1 Rx and Tx
0, // Reserved
IntDefaultHandler, // I2C0 Master and Slave
0,0,0,0,0, // Reserved
IntDefaultHandler, // ADC Channel 0
IntDefaultHandler, // ADC Channel 1
IntDefaultHandler, // ADC Channel 2
IntDefaultHandler, // ADC Channel 3
IntDefaultHandler, // Watchdog Timer
IntDefaultHandler, // Timer 0 subtimer A
IntDefaultHandler, // Timer 0 subtimer B
IntDefaultHandler, // Timer 1 subtimer A
IntDefaultHandler, // Timer 1 subtimer B
IntDefaultHandler, // Timer 2 subtimer A
IntDefaultHandler, // Timer 2 subtimer B
0,0,0,0, // Reserved
IntDefaultHandler, // Flash
0,0,0,0,0, // Reserved
IntDefaultHandler, // Timer 3 subtimer A
IntDefaultHandler, // Timer 3 subtimer B
0,0,0,0,0,0,0,0,0, // Reserved
IntDefaultHandler, // uDMA Software Transfer
IntDefaultHandler, // uDMA Error
0,0,0,0,0,0,0,0,0,0, // Reserved
0,0,0,0,0,0,0,0,0,0, // Reserved
0,0,0,0,0,0,0,0,0,0, // Reserved
0,0,0,0,0,0,0,0,0,0, // Reserved
0,0,0,0,0,0,0,0,0,0, // Reserved
0,0,0,0,0,0,0,0,0,0, // Reserved
0,0,0,0,0,0,0,0,0,0, // Reserved
0,0,0,0,0,0,0,0,0,0, // Reserved
0,0,0,0,0,0,0,0,0,0, // Reserved
0,0,0,0,0,0,0,0,0,0, // Reserved
IntDefaultHandler, // SHA
0,0, // Reserved
IntDefaultHandler, // AES
0, // Reserved
IntDefaultHandler, // DES
0,0,0,0,0, // Reserved
IntDefaultHandler, // SDHost
0, // Reserved
IntDefaultHandler, // I2S
0, // Reserved
IntDefaultHandler, // Camera
0,0,0,0,0,0,0, // Reserved
IntDefaultHandler, // NWP to APPS Interrupt
IntDefaultHandler, // Power, Reset and Clock module
0,0, // Reserved
IntDefaultHandler, // Shared SPI
IntDefaultHandler, // Generic SPI
IntDefaultHandler, // Link SPI
0,0,0,0,0,0,0,0,0,0, // Reserved
0,0,0,0,0,0,0,0,0,0, // Reserved
0,0,0,0,0,0,0,0,0,0, // Reserved
0,0,0,0,0,0,0,0,0,0, // Reserved
0,0,0,0,0,0,0,0,0,0, // Reserved
0,0,0,0,0,0,0,0,0,0, // Reserved
0,0 // Reserved
};
//*****************************************************************************
//
// This is the code that gets called when the processor first starts execution
// following a reset event. Only the absolutely necessary set is performed,
// after which the application supplied entry() routine is called. Any fancy
// actions (such as making decisions based on the reset cause register, and
// resetting the bits in that register) are left solely in the hands of the
// application.
//
//*****************************************************************************
void ResetISR(void)
{
#if defined(DEBUG) && !defined(BOOTLOADER)
{
//
// Fill the main stack with a known value so that
// we can measure the main stack high water mark
//
__asm volatile
(
"ldr r0, =_stack \n"
"ldr r1, =_estack \n"
"mov r2, #0x55555555 \n"
".thumb_func \n"
"fill_loop: \n"
"cmp r0, r1 \n"
"it lt \n"
"strlt r2, [r0], #4 \n"
"blt fill_loop \n"
);
}
#endif
{
// Get the initial stack pointer location from the vector table
// and write this value to the msp register
__asm volatile
(
"ldr r0, =_text \n"
"ldr r0, [r0] \n"
"msr msp, r0 \n"
);
}
{
//
// Zero fill the bss segment.
//
__asm volatile
(
"ldr r0, =_bss \n"
"ldr r1, =_ebss \n"
"mov r2, #0 \n"
".thumb_func \n"
"zero_loop: \n"
"cmp r0, r1 \n"
"it lt \n"
"strlt r2, [r0], #4 \n"
"blt zero_loop \n"
);
}
{
//
// Call the application's entry point.
//
main();
}
}
#ifdef DEBUG
//*****************************************************************************
//
// This is the code that gets called when the processor receives a NMI. This
// simply enters an infinite loop, preserving the system state for examination
// by a debugger.
//
//*****************************************************************************
static void NmiSR(void)
{
// Break into the debugger
__asm volatile ("bkpt #0 \n");
//
// Enter an infinite loop.
//
for ( ; ; )
{
}
}
//*****************************************************************************
//
// This is the code that gets called when the processor receives a hard fault
// interrupt. This simply enters an infinite loop, preserving the system state
// for examination by a debugger.
//
//*****************************************************************************
static void FaultISR(void)
{
/*
* Get the appropriate stack pointer, depending on our mode,
* and use it as the parameter to the C handler. This function
* will never return
*/
__asm volatile
(
"movs r0, #4 \n"
"mov r1, lr \n"
"tst r0, r1 \n"
"beq _msp \n"
"mrs r0, psp \n"
"b HardFault_HandlerC \n"
"_msp: \n"
"mrs r0, msp \n"
"b HardFault_HandlerC \n"
) ;
}
//***********************************************************************************
// HardFaultHandler_C:
// This is called from the FaultISR with a pointer the Fault stack
// as the parameter. We can then read the values from the stack and place them
// into local variables for ease of reading.
// We then read the various Fault Status and Address Registers to help decode
// cause of the fault.
// The function ends with a BKPT instruction to force control back into the debugger
//***********************************************************************************
void HardFault_HandlerC(uint32_t *pulFaultStackAddress)
{
volatile uint32_t r0 ;
volatile uint32_t r1 ;
volatile uint32_t r2 ;
volatile uint32_t r3 ;
volatile uint32_t r12 ;
volatile uint32_t lr ;
volatile uint32_t pc ;
volatile uint32_t psr ;
volatile _CFSR_t _CFSR ;
volatile _HFSR_t _HFSR ;
volatile uint32_t _BFAR ;
r0 = pulFaultStackAddress[0];
r1 = pulFaultStackAddress[1];
r2 = pulFaultStackAddress[2];
r3 = pulFaultStackAddress[3];
r12 = pulFaultStackAddress[4];
lr = pulFaultStackAddress[5];
pc = pulFaultStackAddress[6];
psr = pulFaultStackAddress[7];
// Configurable Fault Status Register
// Consists of MMSR, BFSR and UFSR
_CFSR = (*((volatile _CFSR_t *)(0xE000ED28)));
// Hard Fault Status Register
_HFSR = (*((volatile _HFSR_t *)(0xE000ED2C)));
// Bus Fault Address Register
_BFAR = (*((volatile uint32_t *)(0xE000ED38)));
// Break into the debugger
__asm volatile ("bkpt #0 \n");
for ( ; ; )
{
// Keep the compiler happy
(void)r0, (void)r1, (void)r2, (void)r3, (void)r12, (void)lr, (void)pc, (void)psr;
(void)_CFSR, (void)_HFSR, (void)_BFAR;
}
}
//*****************************************************************************
//
// This is the code that gets called when the processor receives an unexpected
// interrupt. This simply enters an infinite loop, preserving the system state
// for examination by a debugger.
//
//*****************************************************************************
static void BusFaultHandler(void)
{
// Break into the debugger
__asm volatile ("bkpt #0 \n");
//
// Enter an infinite loop.
//
for ( ; ; )
{
}
}
#endif
//*****************************************************************************
//
// This is the code that gets called when the processor receives an unexpected
// interrupt. This simply enters an infinite loop, preserving the system state
// for examination by a debugger.
//
//*****************************************************************************
static void IntDefaultHandler(void)
{
#ifdef DEBUG
// Break into the debugger
__asm volatile ("bkpt #0 \n");
#endif
//
// Enter an infinite loop.
//
for ( ; ; )
{
}
}