micropython/qemu-arm
Damien George b9e3fde21a qemu-arm: Disable gcc LTO option for nlrthumb.c.
If LTO is enabled for nlrthumb.c then gcc optimises away the nlr_push_tail
function when in fact it is needed.  So disable this option for this file.
2016-06-28 12:30:26 +01:00
..
Makefile qemu-arm: Disable gcc LTO option for nlrthumb.c. 2016-06-28 12:30:26 +01:00
README.md qemu: fix typo in readme 2014-07-02 18:30:46 +01:00
main.c py/runtime: mp_stack_ctrl_init() should be called immediately on startup. 2016-01-29 02:13:42 +02:00
mpconfigport.h qemu-arm: Enable builtin override feature, and enable more tests. 2016-03-15 13:45:32 +00:00
mphalport.h all: Add py/mphal.h and use it in all ports. 2015-10-31 19:14:30 +03:00
qstrdefsport.h qemu-arm: more generic port name. 2014-04-21 21:04:04 +01:00
test_main.c py: Add MP_STATE_THREAD to hold state specific to a given thread. 2016-06-28 11:09:31 +01:00

README.md

This is experimental, community-supported port for Cortex-M emulation as provided by QEMU (http://qemu.org).

The purposes of this port are to enable:

  1. Continuous integration
    • run tests agains architecture-specific parts of code base
  2. Experimentation
    • simulation & prototyping of anything that has architecture-specific code
    • exploring instruction set in terms of optimising some part of MicroPython or a module
  3. Streamlined debugging
    • no need for JTAG or even an MCU chip itself
    • no need to use OpenOCD or anything else that might slow down the process in terms of plugging things together, pressing buttons, etc.

This port will only work with with GCC ARM Embedded toolchain and not with CodeSourcery toolchain. You will need to modify LDFLAGS if you want to use CodeSourcery's version of arm-none-eabi. The difference is that CodeSourcery needs -T generic-m-hosted.ld while ARM's version requires --specs=nano.specs --specs=rdimon.specs to be passed to the linker.