![Damien George](/assets/img/avatar_default.png)
This is to keep the top-level directory clean, to make it clear what is core and what is a port, and to allow the repository to grow with new ports in a sustainable way.
2386 lines
158 KiB
C
2386 lines
158 KiB
C
/* Teensyduino Core Library
|
|
* http://www.pjrc.com/teensy/
|
|
* Copyright (c) 2013 PJRC.COM, LLC.
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining
|
|
* a copy of this software and associated documentation files (the
|
|
* "Software"), to deal in the Software without restriction, including
|
|
* without limitation the rights to use, copy, modify, merge, publish,
|
|
* distribute, sublicense, and/or sell copies of the Software, and to
|
|
* permit persons to whom the Software is furnished to do so, subject to
|
|
* the following conditions:
|
|
*
|
|
* 1. The above copyright notice and this permission notice shall be
|
|
* included in all copies or substantial portions of the Software.
|
|
*
|
|
* 2. If the Software is incorporated into a build system that allows
|
|
* selection among a list of target devices, then similar target
|
|
* devices manufactured by PJRC.COM must be included in the list of
|
|
* target devices and selectable in the same manner.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
|
|
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
|
|
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
|
|
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
|
|
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
|
|
* SOFTWARE.
|
|
*/
|
|
|
|
#ifndef _mk20dx128_h_
|
|
#define _mk20dx128_h_
|
|
|
|
//#ifdef F_CPU
|
|
//#undef F_CPU
|
|
//#endif
|
|
//#define F_CPU 168000000
|
|
//#define F_CPU 144000000
|
|
//#define F_CPU 120000000
|
|
//#define F_CPU 96000000
|
|
//#define F_CPU 72000000
|
|
//#define F_CPU 48000000
|
|
//#define F_CPU 24000000
|
|
|
|
#if (F_CPU == 168000000)
|
|
#define F_BUS 56000000
|
|
#define F_MEM 33600000
|
|
#elif (F_CPU == 144000000)
|
|
#define F_BUS 48000000
|
|
#define F_MEM 28800000
|
|
#elif (F_CPU == 120000000)
|
|
#define F_BUS 60000000
|
|
#define F_MEM 24000000
|
|
#elif (F_CPU == 96000000)
|
|
#define F_BUS 48000000
|
|
#define F_MEM 24000000
|
|
#elif (F_CPU == 72000000)
|
|
#define F_BUS 36000000
|
|
#define F_MEM 24000000
|
|
#elif (F_CPU == 48000000)
|
|
#define F_BUS 48000000
|
|
#define F_MEM 24000000
|
|
#elif (F_CPU == 24000000)
|
|
#define F_BUS 24000000
|
|
#define F_MEM 24000000
|
|
#elif (F_CPU == 16000000)
|
|
#define F_BUS 16000000
|
|
#define F_MEM 16000000
|
|
#elif (F_CPU == 8000000)
|
|
#define F_BUS 8000000
|
|
#define F_MEM 8000000
|
|
#elif (F_CPU == 4000000)
|
|
#define F_BUS 4000000
|
|
#define F_MEM 4000000
|
|
#elif (F_CPU == 2000000)
|
|
#define F_BUS 2000000
|
|
#define F_MEM 1000000
|
|
#endif
|
|
|
|
|
|
#ifndef NULL
|
|
#define NULL ((void *)0)
|
|
#endif
|
|
|
|
#include <stdint.h>
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
// chapter 11: Port control and interrupts (PORT)
|
|
#define PORTA_PCR0 *(volatile uint32_t *)0x40049000 // Pin Control Register n
|
|
#define PORT_PCR_ISF (uint32_t)0x01000000 // Interrupt Status Flag
|
|
#define PORT_PCR_IRQC(n) (uint32_t)(((n) & 15) << 16) // Interrupt Configuration
|
|
#define PORT_PCR_IRQC_MASK (uint32_t)0x000F0000
|
|
#define PORT_PCR_LK (uint32_t)0x00008000 // Lock Register
|
|
#define PORT_PCR_MUX(n) (uint32_t)(((n) & 7) << 8) // Pin Mux Control
|
|
#define PORT_PCR_MUX_MASK (uint32_t)0x00000700
|
|
#define PORT_PCR_DSE (uint32_t)0x00000040 // Drive Strength Enable
|
|
#define PORT_PCR_ODE (uint32_t)0x00000020 // Open Drain Enable
|
|
#define PORT_PCR_PFE (uint32_t)0x00000010 // Passive Filter Enable
|
|
#define PORT_PCR_SRE (uint32_t)0x00000004 // Slew Rate Enable
|
|
#define PORT_PCR_PE (uint32_t)0x00000002 // Pull Enable
|
|
#define PORT_PCR_PS (uint32_t)0x00000001 // Pull Select
|
|
#define PORTA_PCR1 *(volatile uint32_t *)0x40049004 // Pin Control Register n
|
|
#define PORTA_PCR2 *(volatile uint32_t *)0x40049008 // Pin Control Register n
|
|
#define PORTA_PCR3 *(volatile uint32_t *)0x4004900C // Pin Control Register n
|
|
#define PORTA_PCR4 *(volatile uint32_t *)0x40049010 // Pin Control Register n
|
|
#define PORTA_PCR5 *(volatile uint32_t *)0x40049014 // Pin Control Register n
|
|
#define PORTA_PCR6 *(volatile uint32_t *)0x40049018 // Pin Control Register n
|
|
#define PORTA_PCR7 *(volatile uint32_t *)0x4004901C // Pin Control Register n
|
|
#define PORTA_PCR8 *(volatile uint32_t *)0x40049020 // Pin Control Register n
|
|
#define PORTA_PCR9 *(volatile uint32_t *)0x40049024 // Pin Control Register n
|
|
#define PORTA_PCR10 *(volatile uint32_t *)0x40049028 // Pin Control Register n
|
|
#define PORTA_PCR11 *(volatile uint32_t *)0x4004902C // Pin Control Register n
|
|
#define PORTA_PCR12 *(volatile uint32_t *)0x40049030 // Pin Control Register n
|
|
#define PORTA_PCR13 *(volatile uint32_t *)0x40049034 // Pin Control Register n
|
|
#define PORTA_PCR14 *(volatile uint32_t *)0x40049038 // Pin Control Register n
|
|
#define PORTA_PCR15 *(volatile uint32_t *)0x4004903C // Pin Control Register n
|
|
#define PORTA_PCR16 *(volatile uint32_t *)0x40049040 // Pin Control Register n
|
|
#define PORTA_PCR17 *(volatile uint32_t *)0x40049044 // Pin Control Register n
|
|
#define PORTA_PCR18 *(volatile uint32_t *)0x40049048 // Pin Control Register n
|
|
#define PORTA_PCR19 *(volatile uint32_t *)0x4004904C // Pin Control Register n
|
|
#define PORTA_PCR20 *(volatile uint32_t *)0x40049050 // Pin Control Register n
|
|
#define PORTA_PCR21 *(volatile uint32_t *)0x40049054 // Pin Control Register n
|
|
#define PORTA_PCR22 *(volatile uint32_t *)0x40049058 // Pin Control Register n
|
|
#define PORTA_PCR23 *(volatile uint32_t *)0x4004905C // Pin Control Register n
|
|
#define PORTA_PCR24 *(volatile uint32_t *)0x40049060 // Pin Control Register n
|
|
#define PORTA_PCR25 *(volatile uint32_t *)0x40049064 // Pin Control Register n
|
|
#define PORTA_PCR26 *(volatile uint32_t *)0x40049068 // Pin Control Register n
|
|
#define PORTA_PCR27 *(volatile uint32_t *)0x4004906C // Pin Control Register n
|
|
#define PORTA_PCR28 *(volatile uint32_t *)0x40049070 // Pin Control Register n
|
|
#define PORTA_PCR29 *(volatile uint32_t *)0x40049074 // Pin Control Register n
|
|
#define PORTA_PCR30 *(volatile uint32_t *)0x40049078 // Pin Control Register n
|
|
#define PORTA_PCR31 *(volatile uint32_t *)0x4004907C // Pin Control Register n
|
|
#define PORTA_GPCLR *(volatile uint32_t *)0x40049080 // Global Pin Control Low Register
|
|
#define PORTA_GPCHR *(volatile uint32_t *)0x40049084 // Global Pin Control High Register
|
|
#define PORTA_ISFR *(volatile uint32_t *)0x400490A0 // Interrupt Status Flag Register
|
|
#define PORTB_PCR0 *(volatile uint32_t *)0x4004A000 // Pin Control Register n
|
|
#define PORTB_PCR1 *(volatile uint32_t *)0x4004A004 // Pin Control Register n
|
|
#define PORTB_PCR2 *(volatile uint32_t *)0x4004A008 // Pin Control Register n
|
|
#define PORTB_PCR3 *(volatile uint32_t *)0x4004A00C // Pin Control Register n
|
|
#define PORTB_PCR4 *(volatile uint32_t *)0x4004A010 // Pin Control Register n
|
|
#define PORTB_PCR5 *(volatile uint32_t *)0x4004A014 // Pin Control Register n
|
|
#define PORTB_PCR6 *(volatile uint32_t *)0x4004A018 // Pin Control Register n
|
|
#define PORTB_PCR7 *(volatile uint32_t *)0x4004A01C // Pin Control Register n
|
|
#define PORTB_PCR8 *(volatile uint32_t *)0x4004A020 // Pin Control Register n
|
|
#define PORTB_PCR9 *(volatile uint32_t *)0x4004A024 // Pin Control Register n
|
|
#define PORTB_PCR10 *(volatile uint32_t *)0x4004A028 // Pin Control Register n
|
|
#define PORTB_PCR11 *(volatile uint32_t *)0x4004A02C // Pin Control Register n
|
|
#define PORTB_PCR12 *(volatile uint32_t *)0x4004A030 // Pin Control Register n
|
|
#define PORTB_PCR13 *(volatile uint32_t *)0x4004A034 // Pin Control Register n
|
|
#define PORTB_PCR14 *(volatile uint32_t *)0x4004A038 // Pin Control Register n
|
|
#define PORTB_PCR15 *(volatile uint32_t *)0x4004A03C // Pin Control Register n
|
|
#define PORTB_PCR16 *(volatile uint32_t *)0x4004A040 // Pin Control Register n
|
|
#define PORTB_PCR17 *(volatile uint32_t *)0x4004A044 // Pin Control Register n
|
|
#define PORTB_PCR18 *(volatile uint32_t *)0x4004A048 // Pin Control Register n
|
|
#define PORTB_PCR19 *(volatile uint32_t *)0x4004A04C // Pin Control Register n
|
|
#define PORTB_PCR20 *(volatile uint32_t *)0x4004A050 // Pin Control Register n
|
|
#define PORTB_PCR21 *(volatile uint32_t *)0x4004A054 // Pin Control Register n
|
|
#define PORTB_PCR22 *(volatile uint32_t *)0x4004A058 // Pin Control Register n
|
|
#define PORTB_PCR23 *(volatile uint32_t *)0x4004A05C // Pin Control Register n
|
|
#define PORTB_PCR24 *(volatile uint32_t *)0x4004A060 // Pin Control Register n
|
|
#define PORTB_PCR25 *(volatile uint32_t *)0x4004A064 // Pin Control Register n
|
|
#define PORTB_PCR26 *(volatile uint32_t *)0x4004A068 // Pin Control Register n
|
|
#define PORTB_PCR27 *(volatile uint32_t *)0x4004A06C // Pin Control Register n
|
|
#define PORTB_PCR28 *(volatile uint32_t *)0x4004A070 // Pin Control Register n
|
|
#define PORTB_PCR29 *(volatile uint32_t *)0x4004A074 // Pin Control Register n
|
|
#define PORTB_PCR30 *(volatile uint32_t *)0x4004A078 // Pin Control Register n
|
|
#define PORTB_PCR31 *(volatile uint32_t *)0x4004A07C // Pin Control Register n
|
|
#define PORTB_GPCLR *(volatile uint32_t *)0x4004A080 // Global Pin Control Low Register
|
|
#define PORTB_GPCHR *(volatile uint32_t *)0x4004A084 // Global Pin Control High Register
|
|
#define PORTB_ISFR *(volatile uint32_t *)0x4004A0A0 // Interrupt Status Flag Register
|
|
#define PORTC_PCR0 *(volatile uint32_t *)0x4004B000 // Pin Control Register n
|
|
#define PORTC_PCR1 *(volatile uint32_t *)0x4004B004 // Pin Control Register n
|
|
#define PORTC_PCR2 *(volatile uint32_t *)0x4004B008 // Pin Control Register n
|
|
#define PORTC_PCR3 *(volatile uint32_t *)0x4004B00C // Pin Control Register n
|
|
#define PORTC_PCR4 *(volatile uint32_t *)0x4004B010 // Pin Control Register n
|
|
#define PORTC_PCR5 *(volatile uint32_t *)0x4004B014 // Pin Control Register n
|
|
#define PORTC_PCR6 *(volatile uint32_t *)0x4004B018 // Pin Control Register n
|
|
#define PORTC_PCR7 *(volatile uint32_t *)0x4004B01C // Pin Control Register n
|
|
#define PORTC_PCR8 *(volatile uint32_t *)0x4004B020 // Pin Control Register n
|
|
#define PORTC_PCR9 *(volatile uint32_t *)0x4004B024 // Pin Control Register n
|
|
#define PORTC_PCR10 *(volatile uint32_t *)0x4004B028 // Pin Control Register n
|
|
#define PORTC_PCR11 *(volatile uint32_t *)0x4004B02C // Pin Control Register n
|
|
#define PORTC_PCR12 *(volatile uint32_t *)0x4004B030 // Pin Control Register n
|
|
#define PORTC_PCR13 *(volatile uint32_t *)0x4004B034 // Pin Control Register n
|
|
#define PORTC_PCR14 *(volatile uint32_t *)0x4004B038 // Pin Control Register n
|
|
#define PORTC_PCR15 *(volatile uint32_t *)0x4004B03C // Pin Control Register n
|
|
#define PORTC_PCR16 *(volatile uint32_t *)0x4004B040 // Pin Control Register n
|
|
#define PORTC_PCR17 *(volatile uint32_t *)0x4004B044 // Pin Control Register n
|
|
#define PORTC_PCR18 *(volatile uint32_t *)0x4004B048 // Pin Control Register n
|
|
#define PORTC_PCR19 *(volatile uint32_t *)0x4004B04C // Pin Control Register n
|
|
#define PORTC_PCR20 *(volatile uint32_t *)0x4004B050 // Pin Control Register n
|
|
#define PORTC_PCR21 *(volatile uint32_t *)0x4004B054 // Pin Control Register n
|
|
#define PORTC_PCR22 *(volatile uint32_t *)0x4004B058 // Pin Control Register n
|
|
#define PORTC_PCR23 *(volatile uint32_t *)0x4004B05C // Pin Control Register n
|
|
#define PORTC_PCR24 *(volatile uint32_t *)0x4004B060 // Pin Control Register n
|
|
#define PORTC_PCR25 *(volatile uint32_t *)0x4004B064 // Pin Control Register n
|
|
#define PORTC_PCR26 *(volatile uint32_t *)0x4004B068 // Pin Control Register n
|
|
#define PORTC_PCR27 *(volatile uint32_t *)0x4004B06C // Pin Control Register n
|
|
#define PORTC_PCR28 *(volatile uint32_t *)0x4004B070 // Pin Control Register n
|
|
#define PORTC_PCR29 *(volatile uint32_t *)0x4004B074 // Pin Control Register n
|
|
#define PORTC_PCR30 *(volatile uint32_t *)0x4004B078 // Pin Control Register n
|
|
#define PORTC_PCR31 *(volatile uint32_t *)0x4004B07C // Pin Control Register n
|
|
#define PORTC_GPCLR *(volatile uint32_t *)0x4004B080 // Global Pin Control Low Register
|
|
#define PORTC_GPCHR *(volatile uint32_t *)0x4004B084 // Global Pin Control High Register
|
|
#define PORTC_ISFR *(volatile uint32_t *)0x4004B0A0 // Interrupt Status Flag Register
|
|
#define PORTD_PCR0 *(volatile uint32_t *)0x4004C000 // Pin Control Register n
|
|
#define PORTD_PCR1 *(volatile uint32_t *)0x4004C004 // Pin Control Register n
|
|
#define PORTD_PCR2 *(volatile uint32_t *)0x4004C008 // Pin Control Register n
|
|
#define PORTD_PCR3 *(volatile uint32_t *)0x4004C00C // Pin Control Register n
|
|
#define PORTD_PCR4 *(volatile uint32_t *)0x4004C010 // Pin Control Register n
|
|
#define PORTD_PCR5 *(volatile uint32_t *)0x4004C014 // Pin Control Register n
|
|
#define PORTD_PCR6 *(volatile uint32_t *)0x4004C018 // Pin Control Register n
|
|
#define PORTD_PCR7 *(volatile uint32_t *)0x4004C01C // Pin Control Register n
|
|
#define PORTD_PCR8 *(volatile uint32_t *)0x4004C020 // Pin Control Register n
|
|
#define PORTD_PCR9 *(volatile uint32_t *)0x4004C024 // Pin Control Register n
|
|
#define PORTD_PCR10 *(volatile uint32_t *)0x4004C028 // Pin Control Register n
|
|
#define PORTD_PCR11 *(volatile uint32_t *)0x4004C02C // Pin Control Register n
|
|
#define PORTD_PCR12 *(volatile uint32_t *)0x4004C030 // Pin Control Register n
|
|
#define PORTD_PCR13 *(volatile uint32_t *)0x4004C034 // Pin Control Register n
|
|
#define PORTD_PCR14 *(volatile uint32_t *)0x4004C038 // Pin Control Register n
|
|
#define PORTD_PCR15 *(volatile uint32_t *)0x4004C03C // Pin Control Register n
|
|
#define PORTD_PCR16 *(volatile uint32_t *)0x4004C040 // Pin Control Register n
|
|
#define PORTD_PCR17 *(volatile uint32_t *)0x4004C044 // Pin Control Register n
|
|
#define PORTD_PCR18 *(volatile uint32_t *)0x4004C048 // Pin Control Register n
|
|
#define PORTD_PCR19 *(volatile uint32_t *)0x4004C04C // Pin Control Register n
|
|
#define PORTD_PCR20 *(volatile uint32_t *)0x4004C050 // Pin Control Register n
|
|
#define PORTD_PCR21 *(volatile uint32_t *)0x4004C054 // Pin Control Register n
|
|
#define PORTD_PCR22 *(volatile uint32_t *)0x4004C058 // Pin Control Register n
|
|
#define PORTD_PCR23 *(volatile uint32_t *)0x4004C05C // Pin Control Register n
|
|
#define PORTD_PCR24 *(volatile uint32_t *)0x4004C060 // Pin Control Register n
|
|
#define PORTD_PCR25 *(volatile uint32_t *)0x4004C064 // Pin Control Register n
|
|
#define PORTD_PCR26 *(volatile uint32_t *)0x4004C068 // Pin Control Register n
|
|
#define PORTD_PCR27 *(volatile uint32_t *)0x4004C06C // Pin Control Register n
|
|
#define PORTD_PCR28 *(volatile uint32_t *)0x4004C070 // Pin Control Register n
|
|
#define PORTD_PCR29 *(volatile uint32_t *)0x4004C074 // Pin Control Register n
|
|
#define PORTD_PCR30 *(volatile uint32_t *)0x4004C078 // Pin Control Register n
|
|
#define PORTD_PCR31 *(volatile uint32_t *)0x4004C07C // Pin Control Register n
|
|
#define PORTD_GPCLR *(volatile uint32_t *)0x4004C080 // Global Pin Control Low Register
|
|
#define PORTD_GPCHR *(volatile uint32_t *)0x4004C084 // Global Pin Control High Register
|
|
#define PORTD_ISFR *(volatile uint32_t *)0x4004C0A0 // Interrupt Status Flag Register
|
|
#define PORTE_PCR0 *(volatile uint32_t *)0x4004D000 // Pin Control Register n
|
|
#define PORTE_PCR1 *(volatile uint32_t *)0x4004D004 // Pin Control Register n
|
|
#define PORTE_PCR2 *(volatile uint32_t *)0x4004D008 // Pin Control Register n
|
|
#define PORTE_PCR3 *(volatile uint32_t *)0x4004D00C // Pin Control Register n
|
|
#define PORTE_PCR4 *(volatile uint32_t *)0x4004D010 // Pin Control Register n
|
|
#define PORTE_PCR5 *(volatile uint32_t *)0x4004D014 // Pin Control Register n
|
|
#define PORTE_PCR6 *(volatile uint32_t *)0x4004D018 // Pin Control Register n
|
|
#define PORTE_PCR7 *(volatile uint32_t *)0x4004D01C // Pin Control Register n
|
|
#define PORTE_PCR8 *(volatile uint32_t *)0x4004D020 // Pin Control Register n
|
|
#define PORTE_PCR9 *(volatile uint32_t *)0x4004D024 // Pin Control Register n
|
|
#define PORTE_PCR10 *(volatile uint32_t *)0x4004D028 // Pin Control Register n
|
|
#define PORTE_PCR11 *(volatile uint32_t *)0x4004D02C // Pin Control Register n
|
|
#define PORTE_PCR12 *(volatile uint32_t *)0x4004D030 // Pin Control Register n
|
|
#define PORTE_PCR13 *(volatile uint32_t *)0x4004D034 // Pin Control Register n
|
|
#define PORTE_PCR14 *(volatile uint32_t *)0x4004D038 // Pin Control Register n
|
|
#define PORTE_PCR15 *(volatile uint32_t *)0x4004D03C // Pin Control Register n
|
|
#define PORTE_PCR16 *(volatile uint32_t *)0x4004D040 // Pin Control Register n
|
|
#define PORTE_PCR17 *(volatile uint32_t *)0x4004D044 // Pin Control Register n
|
|
#define PORTE_PCR18 *(volatile uint32_t *)0x4004D048 // Pin Control Register n
|
|
#define PORTE_PCR19 *(volatile uint32_t *)0x4004D04C // Pin Control Register n
|
|
#define PORTE_PCR20 *(volatile uint32_t *)0x4004D050 // Pin Control Register n
|
|
#define PORTE_PCR21 *(volatile uint32_t *)0x4004D054 // Pin Control Register n
|
|
#define PORTE_PCR22 *(volatile uint32_t *)0x4004D058 // Pin Control Register n
|
|
#define PORTE_PCR23 *(volatile uint32_t *)0x4004D05C // Pin Control Register n
|
|
#define PORTE_PCR24 *(volatile uint32_t *)0x4004D060 // Pin Control Register n
|
|
#define PORTE_PCR25 *(volatile uint32_t *)0x4004D064 // Pin Control Register n
|
|
#define PORTE_PCR26 *(volatile uint32_t *)0x4004D068 // Pin Control Register n
|
|
#define PORTE_PCR27 *(volatile uint32_t *)0x4004D06C // Pin Control Register n
|
|
#define PORTE_PCR28 *(volatile uint32_t *)0x4004D070 // Pin Control Register n
|
|
#define PORTE_PCR29 *(volatile uint32_t *)0x4004D074 // Pin Control Register n
|
|
#define PORTE_PCR30 *(volatile uint32_t *)0x4004D078 // Pin Control Register n
|
|
#define PORTE_PCR31 *(volatile uint32_t *)0x4004D07C // Pin Control Register n
|
|
#define PORTE_GPCLR *(volatile uint32_t *)0x4004D080 // Global Pin Control Low Register
|
|
#define PORTE_GPCHR *(volatile uint32_t *)0x4004D084 // Global Pin Control High Register
|
|
#define PORTE_ISFR *(volatile uint32_t *)0x4004D0A0 // Interrupt Status Flag Register
|
|
|
|
// Chapter 12: System Integration Module (SIM)
|
|
#define SIM_SOPT1 *(volatile uint32_t *)0x40047000 // System Options Register 1
|
|
#define SIM_SOPT1CFG *(volatile uint32_t *)0x40047004 // SOPT1 Configuration Register
|
|
#define SIM_SOPT2 *(volatile uint32_t *)0x40048004 // System Options Register 2
|
|
#define SIM_SOPT2_USBSRC (uint32_t)0x00040000 // 0=USB_CLKIN, 1=FFL/PLL
|
|
#define SIM_SOPT2_PLLFLLSEL (uint32_t)0x00010000 // 0=FLL, 1=PLL
|
|
#define SIM_SOPT2_TRACECLKSEL (uint32_t)0x00001000 // 0=MCGOUTCLK, 1=CPU
|
|
#define SIM_SOPT2_PTD7PAD (uint32_t)0x00000800 // 0=normal, 1=double drive PTD7
|
|
#define SIM_SOPT2_CLKOUTSEL(n) (uint32_t)(((n) & 7) << 5) // Selects the clock to output on the CLKOUT pin.
|
|
#define SIM_SOPT2_RTCCLKOUTSEL (uint32_t)0x00000010 // RTC clock out select
|
|
#define SIM_SOPT4 *(volatile uint32_t *)0x4004800C // System Options Register 4
|
|
#define SIM_SOPT5 *(volatile uint32_t *)0x40048010 // System Options Register 5
|
|
#define SIM_SOPT7 *(volatile uint32_t *)0x40048018 // System Options Register 7
|
|
#define SIM_SDID *(const uint32_t *)0x40048024 // System Device Identification Register
|
|
#define SIM_SCGC2 *(volatile uint32_t *)0x4004802C // System Clock Gating Control Register 2
|
|
#define SIM_SCGC2_DAC0 (uint32_t)0x00001000 // DAC0 Clock Gate Control
|
|
#define SIM_SCGC3 *(volatile uint32_t *)0x40048030 // System Clock Gating Control Register 3
|
|
#define SIM_SCGC3_ADC1 (uint32_t)0x08000000 // ADC1 Clock Gate Control
|
|
#define SIM_SCGC3_FTM2 (uint32_t)0x01000000 // FTM2 Clock Gate Control
|
|
#define SIM_SCGC4 *(volatile uint32_t *)0x40048034 // System Clock Gating Control Register 4
|
|
#define SIM_SCGC4_VREF (uint32_t)0x00100000 // VREF Clock Gate Control
|
|
#define SIM_SCGC4_CMP (uint32_t)0x00080000 // Comparator Clock Gate Control
|
|
#define SIM_SCGC4_USBOTG (uint32_t)0x00040000 // USB Clock Gate Control
|
|
#define SIM_SCGC4_UART2 (uint32_t)0x00001000 // UART2 Clock Gate Control
|
|
#define SIM_SCGC4_UART1 (uint32_t)0x00000800 // UART1 Clock Gate Control
|
|
#define SIM_SCGC4_UART0 (uint32_t)0x00000400 // UART0 Clock Gate Control
|
|
#define SIM_SCGC4_I2C1 (uint32_t)0x00000080 // I2C1 Clock Gate Control
|
|
#define SIM_SCGC4_I2C0 (uint32_t)0x00000040 // I2C0 Clock Gate Control
|
|
#define SIM_SCGC4_CMT (uint32_t)0x00000004 // CMT Clock Gate Control
|
|
#define SIM_SCGC4_EWM (uint32_t)0x00000002 // EWM Clock Gate Control
|
|
#define SIM_SCGC5 *(volatile uint32_t *)0x40048038 // System Clock Gating Control Register 5
|
|
#define SIM_SCGC5_PORTE (uint32_t)0x00002000 // Port E Clock Gate Control
|
|
#define SIM_SCGC5_PORTD (uint32_t)0x00001000 // Port D Clock Gate Control
|
|
#define SIM_SCGC5_PORTC (uint32_t)0x00000800 // Port C Clock Gate Control
|
|
#define SIM_SCGC5_PORTB (uint32_t)0x00000400 // Port B Clock Gate Control
|
|
#define SIM_SCGC5_PORTA (uint32_t)0x00000200 // Port A Clock Gate Control
|
|
#define SIM_SCGC5_TSI (uint32_t)0x00000020 // Touch Sense Input TSI Clock Gate Control
|
|
#define SIM_SCGC5_LPTIMER (uint32_t)0x00000001 // Low Power Timer Access Control
|
|
#define SIM_SCGC6 *(volatile uint32_t *)0x4004803C // System Clock Gating Control Register 6
|
|
#define SIM_SCGC6_RTC (uint32_t)0x20000000 // RTC Access
|
|
#define SIM_SCGC6_ADC0 (uint32_t)0x08000000 // ADC0 Clock Gate Control
|
|
#define SIM_SCGC6_FTM1 (uint32_t)0x02000000 // FTM1 Clock Gate Control
|
|
#define SIM_SCGC6_FTM0 (uint32_t)0x01000000 // FTM0 Clock Gate Control
|
|
#define SIM_SCGC6_PIT (uint32_t)0x00800000 // PIT Clock Gate Control
|
|
#define SIM_SCGC6_PDB (uint32_t)0x00400000 // PDB Clock Gate Control
|
|
#define SIM_SCGC6_USBDCD (uint32_t)0x00200000 // USB DCD Clock Gate Control
|
|
#define SIM_SCGC6_CRC (uint32_t)0x00040000 // CRC Clock Gate Control
|
|
#define SIM_SCGC6_I2S (uint32_t)0x00008000 // I2S Clock Gate Control
|
|
#define SIM_SCGC6_SPI1 (uint32_t)0x00002000 // SPI1 Clock Gate Control
|
|
#define SIM_SCGC6_SPI0 (uint32_t)0x00001000 // SPI0 Clock Gate Control
|
|
#define SIM_SCGC6_FLEXCAN0 (uint32_t)0x00000010 // FlexCAN0 Clock Gate Control
|
|
#define SIM_SCGC6_DMAMUX (uint32_t)0x00000002 // DMA Mux Clock Gate Control
|
|
#define SIM_SCGC6_FTFL (uint32_t)0x00000001 // Flash Memory Clock Gate Control
|
|
#define SIM_SCGC7 *(volatile uint32_t *)0x40048040 // System Clock Gating Control Register 7
|
|
#define SIM_SCGC7_DMA (uint32_t)0x00000002 // DMA Clock Gate Control
|
|
#define SIM_CLKDIV1 *(volatile uint32_t *)0x40048044 // System Clock Divider Register 1
|
|
#define SIM_CLKDIV1_OUTDIV1(n) (uint32_t)(((n) & 0x0F) << 28) // divide value for the core/system clock
|
|
#define SIM_CLKDIV1_OUTDIV2(n) (uint32_t)(((n) & 0x0F) << 24) // divide value for the peripheral clock
|
|
#define SIM_CLKDIV1_OUTDIV4(n) (uint32_t)(((n) & 0x0F) << 16) // divide value for the flash clock
|
|
#define SIM_CLKDIV2 *(volatile uint32_t *)0x40048048 // System Clock Divider Register 2
|
|
#define SIM_CLKDIV2_USBDIV(n) (uint32_t)(((n) & 0x07) << 1)
|
|
#define SIM_CLKDIV2_USBFRAC (uint32_t)0x01
|
|
#define SIM_FCFG1 *(const uint32_t *)0x4004804C // Flash Configuration Register 1
|
|
#define SIM_FCFG2 *(const uint32_t *)0x40048050 // Flash Configuration Register 2
|
|
#define SIM_UIDH *(const uint32_t *)0x40048054 // Unique Identification Register High
|
|
#define SIM_UIDMH *(const uint32_t *)0x40048058 // Unique Identification Register Mid-High
|
|
#define SIM_UIDML *(const uint32_t *)0x4004805C // Unique Identification Register Mid Low
|
|
#define SIM_UIDL *(const uint32_t *)0x40048060 // Unique Identification Register Low
|
|
|
|
// Chapter 13: Reset Control Module (RCM)
|
|
#define RCM_SRS0 *(volatile uint8_t *)0x4007F000 // System Reset Status Register 0
|
|
#define RCM_SRS1 *(volatile uint8_t *)0x4007F001 // System Reset Status Register 1
|
|
#define RCM_RPFC *(volatile uint8_t *)0x4007F004 // Reset Pin Filter Control Register
|
|
#define RCM_RPFW *(volatile uint8_t *)0x4007F005 // Reset Pin Filter Width Register
|
|
#define RCM_MR *(volatile uint8_t *)0x4007F007 // Mode Register
|
|
|
|
// Chapter 14: System Mode Controller
|
|
#define SMC_PMPROT *(volatile uint8_t *)0x4007E000 // Power Mode Protection Register
|
|
#define SMC_PMPROT_AVLP (uint8_t)0x20 // Allow very low power modes
|
|
#define SMC_PMPROT_ALLS (uint8_t)0x08 // Allow low leakage stop mode
|
|
#define SMC_PMPROT_AVLLS (uint8_t)0x02 // Allow very low leakage stop mode
|
|
#define SMC_PMCTRL *(volatile uint8_t *)0x4007E001 // Power Mode Control Register
|
|
#define SMC_PMCTRL_LPWUI (uint8_t)0x80 // Low Power Wake Up on Interrupt
|
|
#define SMC_PMCTRL_RUNM(n) (uint8_t)(((n) & 0x03) << 5) // Run Mode Control
|
|
#define SMC_PMCTRL_STOPA (uint8_t)0x08 // Stop Aborted
|
|
#define SMC_PMCTRL_STOPM(n) (uint8_t)((n) & 0x07) // Stop Mode Control
|
|
#define SMC_VLLSCTRL *(volatile uint8_t *)0x4007E002 // VLLS Control Register
|
|
#define SMC_VLLSCTRL_PORPO (uint8_t)0x20 // POR Power Option
|
|
#define SMC_VLLSCTRL_VLLSM(n) (uint8_t)((n) & 0x07) // VLLS Mode Control
|
|
#define SMC_PMSTAT *(volatile uint8_t *)0x4007E003 // Power Mode Status Register
|
|
#define SMC_PMSTAT_RUN (uint8_t)0x01 // Current power mode is RUN
|
|
#define SMC_PMSTAT_STOP (uint8_t)0x02 // Current power mode is STOP
|
|
#define SMC_PMSTAT_VLPR (uint8_t)0x04 // Current power mode is VLPR
|
|
#define SMC_PMSTAT_VLPW (uint8_t)0x08 // Current power mode is VLPW
|
|
#define SMC_PMSTAT_VLPS (uint8_t)0x10 // Current power mode is VLPS
|
|
#define SMC_PMSTAT_LLS (uint8_t)0x20 // Current power mode is LLS
|
|
#define SMC_PMSTAT_VLLS (uint8_t)0x40 // Current power mode is VLLS
|
|
|
|
// Chapter 15: Power Management Controller
|
|
#define PMC_LVDSC1 *(volatile uint8_t *)0x4007D000 // Low Voltage Detect Status And Control 1 register
|
|
#define PMC_LVDSC1_LVDF (uint8_t)0x80 // Low-Voltage Detect Flag
|
|
#define PMC_LVDSC1_LVDACK (uint8_t)0x40 // Low-Voltage Detect Acknowledge
|
|
#define PMC_LVDSC1_LVDIE (uint8_t)0x20 // Low-Voltage Detect Interrupt Enable
|
|
#define PMC_LVDSC1_LVDRE (uint8_t)0x10 // Low-Voltage Detect Reset Enable
|
|
#define PMC_LVDSC1_LVDV(n) (uint8_t)((n) & 0x03) // Low-Voltage Detect Voltage Select
|
|
#define PMC_LVDSC2 *(volatile uint8_t *)0x4007D001 // Low Voltage Detect Status And Control 2 register
|
|
#define PMC_LVDSC2_LVWF (uint8_t)0x80 // Low-Voltage Warning Flag
|
|
#define PMC_LVDSC2_LVWACK (uint8_t)0x40 // Low-Voltage Warning Acknowledge
|
|
#define PMC_LVDSC2_LVWIE (uint8_t)0x20 // Low-Voltage Warning Interrupt Enable
|
|
#define PMC_LVDSC2_LVWV(n) (uint8_t)((n) & 0x03) // Low-Voltage Warning Voltage Select
|
|
#define PMC_REGSC *(volatile uint8_t *)0x4007D002 // Regulator Status And Control register
|
|
#define PMC_REGSC_BGEN (uint8_t)0x10 // Bandgap Enable In VLPx Operation
|
|
#define PMC_REGSC_ACKISO (uint8_t)0x08 // Acknowledge Isolation
|
|
#define PMC_REGSC_REGONS (uint8_t)0x04 // Regulator In Run Regulation Status
|
|
#define PMC_REGSC_BGBE (uint8_t)0x01 // Bandgap Buffer Enable
|
|
|
|
// Chapter 16: Low-Leakage Wakeup Unit (LLWU)
|
|
#define LLWU_PE1 *(volatile uint8_t *)0x4007C000 // LLWU Pin Enable 1 register
|
|
#define LLWU_PE2 *(volatile uint8_t *)0x4007C001 // LLWU Pin Enable 2 register
|
|
#define LLWU_PE3 *(volatile uint8_t *)0x4007C002 // LLWU Pin Enable 3 register
|
|
#define LLWU_PE4 *(volatile uint8_t *)0x4007C003 // LLWU Pin Enable 4 register
|
|
#define LLWU_ME *(volatile uint8_t *)0x4007C004 // LLWU Module Enable register
|
|
#define LLWU_F1 *(volatile uint8_t *)0x4007C005 // LLWU Flag 1 register
|
|
#define LLWU_F2 *(volatile uint8_t *)0x4007C006 // LLWU Flag 2 register
|
|
#define LLWU_F3 *(volatile uint8_t *)0x4007C007 // LLWU Flag 3 register
|
|
#define LLWU_FILT1 *(volatile uint8_t *)0x4007C008 // LLWU Pin Filter 1 register
|
|
#define LLWU_FILT2 *(volatile uint8_t *)0x4007C009 // LLWU Pin Filter 2 register
|
|
#define LLWU_RST *(volatile uint8_t *)0x4007C00A // LLWU Reset Enable register
|
|
|
|
// Chapter 17: Miscellaneous Control Module (MCM)
|
|
#define MCM_PLASC *(volatile uint16_t *)0xE0080008 // Crossbar Switch (AXBS) Slave Configuration
|
|
#define MCM_PLAMC *(volatile uint16_t *)0xE008000A // Crossbar Switch (AXBS) Master Configuration
|
|
#define MCM_PLACR *(volatile uint32_t *)0xE008000C // Crossbar Switch (AXBS) Control Register (MK20DX128)
|
|
#define MCM_PLACR_ARG (uint32_t)0x00000200 // Arbitration select, 0=fixed, 1=round-robin
|
|
#define MCM_CR *(volatile uint32_t *)0xE008000C // RAM arbitration control register (MK20DX256)
|
|
#define MCM_CR_SRAMLWP (uint32_t)0x40000000 // SRAM_L write protect
|
|
#define MCM_CR_SRAMLAP(n) (uint32_t)(((n) & 0x03) << 28) // SRAM_L priority, 0=RR, 1=favor DMA, 2=CPU, 3=DMA
|
|
#define MCM_CR_SRAMUWP (uint32_t)0x04000000 // SRAM_U write protect
|
|
#define MCM_CR_SRAMUAP(n) (uint32_t)(((n) & 0x03) << 24) // SRAM_U priority, 0=RR, 1=favor DMA, 2=CPU, 3=DMA
|
|
|
|
// Crossbar Switch (AXBS) - only programmable on MK20DX256
|
|
#define AXBS_PRS0 *(volatile uint32_t *)0x40004000 // Priority Registers Slave 0
|
|
#define AXBS_CRS0 *(volatile uint32_t *)0x40004010 // Control Register 0
|
|
#define AXBS_PRS1 *(volatile uint32_t *)0x40004100 // Priority Registers Slave 1
|
|
#define AXBS_CRS1 *(volatile uint32_t *)0x40004110 // Control Register 1
|
|
#define AXBS_PRS2 *(volatile uint32_t *)0x40004200 // Priority Registers Slave 2
|
|
#define AXBS_CRS2 *(volatile uint32_t *)0x40004210 // Control Register 2
|
|
#define AXBS_PRS3 *(volatile uint32_t *)0x40004300 // Priority Registers Slave 3
|
|
#define AXBS_CRS3 *(volatile uint32_t *)0x40004310 // Control Register 3
|
|
#define AXBS_PRS4 *(volatile uint32_t *)0x40004400 // Priority Registers Slave 4
|
|
#define AXBS_CRS4 *(volatile uint32_t *)0x40004410 // Control Register 4
|
|
#define AXBS_PRS5 *(volatile uint32_t *)0x40004500 // Priority Registers Slave 5
|
|
#define AXBS_CRS5 *(volatile uint32_t *)0x40004510 // Control Register 5
|
|
#define AXBS_PRS6 *(volatile uint32_t *)0x40004600 // Priority Registers Slave 6
|
|
#define AXBS_CRS6 *(volatile uint32_t *)0x40004610 // Control Register 6
|
|
#define AXBS_PRS7 *(volatile uint32_t *)0x40004700 // Priority Registers Slave 7
|
|
#define AXBS_CRS7 *(volatile uint32_t *)0x40004710 // Control Register 7
|
|
#define AXBS_MGPCR0 *(volatile uint32_t *)0x40004800 // Master 0 General Purpose Control Register
|
|
#define AXBS_MGPCR1 *(volatile uint32_t *)0x40004900 // Master 1 General Purpose Control Register
|
|
#define AXBS_MGPCR2 *(volatile uint32_t *)0x40004A00 // Master 2 General Purpose Control Register
|
|
#define AXBS_MGPCR3 *(volatile uint32_t *)0x40004B00 // Master 3 General Purpose Control Register
|
|
#define AXBS_MGPCR4 *(volatile uint32_t *)0x40004C00 // Master 4 General Purpose Control Register
|
|
#define AXBS_MGPCR5 *(volatile uint32_t *)0x40004D00 // Master 5 General Purpose Control Register
|
|
#define AXBS_MGPCR6 *(volatile uint32_t *)0x40004E00 // Master 6 General Purpose Control Register
|
|
#define AXBS_MGPCR7 *(volatile uint32_t *)0x40004F00 // Master 7 General Purpose Control Register
|
|
#define AXBS_CRS_READONLY (uint32_t)0x80000000
|
|
#define AXBS_CRS_HALTLOWPRIORITY (uint32_t)0x40000000
|
|
#define AXBS_CRS_ARB_FIXED (uint32_t)0x00000000
|
|
#define AXBS_CRS_ARB_ROUNDROBIN (uint32_t)0x00010000
|
|
#define AXBS_CRS_PARK_FIXED (uint32_t)0x00000000
|
|
#define AXBS_CRS_PARK_PREVIOUS (uint32_t)0x00000010
|
|
#define AXBS_CRS_PARK_NONE (uint32_t)0x00000020
|
|
#define AXBS_CRS_PARK(n) (uint32_t)(((n) & 7) << 0)
|
|
|
|
|
|
|
|
// Chapter 20: Direct Memory Access Multiplexer (DMAMUX)
|
|
#define DMAMUX0_CHCFG0 *(volatile uint8_t *)0x40021000 // Channel Configuration register
|
|
#define DMAMUX0_CHCFG1 *(volatile uint8_t *)0x40021001 // Channel Configuration register
|
|
#define DMAMUX0_CHCFG2 *(volatile uint8_t *)0x40021002 // Channel Configuration register
|
|
#define DMAMUX0_CHCFG3 *(volatile uint8_t *)0x40021003 // Channel Configuration register
|
|
#define DMAMUX0_CHCFG4 *(volatile uint8_t *)0x40021004 // Channel Configuration register
|
|
#define DMAMUX0_CHCFG5 *(volatile uint8_t *)0x40021005 // Channel Configuration register
|
|
#define DMAMUX0_CHCFG6 *(volatile uint8_t *)0x40021006 // Channel Configuration register
|
|
#define DMAMUX0_CHCFG7 *(volatile uint8_t *)0x40021007 // Channel Configuration register
|
|
#define DMAMUX0_CHCFG8 *(volatile uint8_t *)0x40021008 // Channel Configuration register
|
|
#define DMAMUX0_CHCFG9 *(volatile uint8_t *)0x40021009 // Channel Configuration register
|
|
#define DMAMUX0_CHCFG10 *(volatile uint8_t *)0x4002100A // Channel Configuration register
|
|
#define DMAMUX0_CHCFG11 *(volatile uint8_t *)0x4002100B // Channel Configuration register
|
|
#define DMAMUX0_CHCFG12 *(volatile uint8_t *)0x4002100C // Channel Configuration register
|
|
#define DMAMUX0_CHCFG13 *(volatile uint8_t *)0x4002100D // Channel Configuration register
|
|
#define DMAMUX0_CHCFG14 *(volatile uint8_t *)0x4002100E // Channel Configuration register
|
|
#define DMAMUX0_CHCFG15 *(volatile uint8_t *)0x4002100F // Channel Configuration register
|
|
#define DMAMUX_DISABLE 0
|
|
#define DMAMUX_TRIG 64
|
|
#define DMAMUX_ENABLE 128
|
|
#define DMAMUX_SOURCE_UART0_RX 2
|
|
#define DMAMUX_SOURCE_UART0_TX 3
|
|
#define DMAMUX_SOURCE_UART1_RX 4
|
|
#define DMAMUX_SOURCE_UART1_TX 5
|
|
#define DMAMUX_SOURCE_UART2_RX 6
|
|
#define DMAMUX_SOURCE_UART2_TX 7
|
|
#define DMAMUX_SOURCE_I2S0_RX 14
|
|
#define DMAMUX_SOURCE_I2S0_TX 15
|
|
#define DMAMUX_SOURCE_SPI0_RX 16
|
|
#define DMAMUX_SOURCE_SPI0_TX 17
|
|
#define DMAMUX_SOURCE_I2C0 22
|
|
#define DMAMUX_SOURCE_I2C1 23
|
|
#define DMAMUX_SOURCE_FTM0_CH0 24
|
|
#define DMAMUX_SOURCE_FTM0_CH1 25
|
|
#define DMAMUX_SOURCE_FTM0_CH2 26
|
|
#define DMAMUX_SOURCE_FTM0_CH3 27
|
|
#define DMAMUX_SOURCE_FTM0_CH4 28
|
|
#define DMAMUX_SOURCE_FTM0_CH5 29
|
|
#define DMAMUX_SOURCE_FTM0_CH6 30
|
|
#define DMAMUX_SOURCE_FTM0_CH7 31
|
|
#define DMAMUX_SOURCE_FTM1_CH0 32
|
|
#define DMAMUX_SOURCE_FTM1_CH1 33
|
|
#define DMAMUX_SOURCE_FTM2_CH0 34
|
|
#define DMAMUX_SOURCE_FTM2_CH1 35
|
|
#define DMAMUX_SOURCE_ADC0 40
|
|
#define DMAMUX_SOURCE_ADC1 41
|
|
#define DMAMUX_SOURCE_CMP0 42
|
|
#define DMAMUX_SOURCE_CMP1 43
|
|
#define DMAMUX_SOURCE_CMP2 44
|
|
#define DMAMUX_SOURCE_DAC0 45
|
|
#define DMAMUX_SOURCE_CMT 47
|
|
#define DMAMUX_SOURCE_PDB 48
|
|
#define DMAMUX_SOURCE_PORTA 49
|
|
#define DMAMUX_SOURCE_PORTB 50
|
|
#define DMAMUX_SOURCE_PORTC 51
|
|
#define DMAMUX_SOURCE_PORTD 52
|
|
#define DMAMUX_SOURCE_PORTE 53
|
|
#define DMAMUX_SOURCE_ALWAYS0 54
|
|
#define DMAMUX_SOURCE_ALWAYS1 55
|
|
#define DMAMUX_SOURCE_ALWAYS2 56
|
|
#define DMAMUX_SOURCE_ALWAYS3 57
|
|
#define DMAMUX_SOURCE_ALWAYS4 58
|
|
#define DMAMUX_SOURCE_ALWAYS5 59
|
|
#define DMAMUX_SOURCE_ALWAYS6 60
|
|
#define DMAMUX_SOURCE_ALWAYS7 61
|
|
#define DMAMUX_SOURCE_ALWAYS8 62
|
|
#define DMAMUX_SOURCE_ALWAYS9 63
|
|
|
|
// Chapter 21: Direct Memory Access Controller (eDMA)
|
|
#define DMA_CR *(volatile uint32_t *)0x40008000 // Control Register
|
|
#define DMA_CR_CX ((uint32_t)(1<<17)) // Cancel Transfer
|
|
#define DMA_CR_ECX ((uint32_t)(1<<16)) // Error Cancel Transfer
|
|
#define DMA_CR_EMLM ((uint32_t)0x80) // Enable Minor Loop Mapping
|
|
#define DMA_CR_CLM ((uint32_t)0x40) // Continuous Link Mode
|
|
#define DMA_CR_HALT ((uint32_t)0x20) // Halt DMA Operations
|
|
#define DMA_CR_HOE ((uint32_t)0x10) // Halt On Error
|
|
#define DMA_CR_ERCA ((uint32_t)0x04) // Enable Round Robin Channel Arbitration
|
|
#define DMA_CR_EDBG ((uint32_t)0x02) // Enable Debug
|
|
#define DMA_ES *(volatile uint32_t *)0x40008004 // Error Status Register
|
|
#define DMA_ERQ *(volatile uint32_t *)0x4000800C // Enable Request Register
|
|
#define DMA_ERQ_ERQ0 ((uint32_t)1<<0) // Enable DMA Request 0
|
|
#define DMA_ERQ_ERQ1 ((uint32_t)1<<1) // Enable DMA Request 1
|
|
#define DMA_ERQ_ERQ2 ((uint32_t)1<<2) // Enable DMA Request 2
|
|
#define DMA_ERQ_ERQ3 ((uint32_t)1<<3) // Enable DMA Request 3
|
|
#define DMA_ERQ_ERQ4 ((uint32_t)1<<4) // Enable DMA Request 4
|
|
#define DMA_ERQ_ERQ5 ((uint32_t)1<<5) // Enable DMA Request 5
|
|
#define DMA_ERQ_ERQ6 ((uint32_t)1<<6) // Enable DMA Request 6
|
|
#define DMA_ERQ_ERQ7 ((uint32_t)1<<7) // Enable DMA Request 7
|
|
#define DMA_ERQ_ERQ8 ((uint32_t)1<<8) // Enable DMA Request 8
|
|
#define DMA_ERQ_ERQ9 ((uint32_t)1<<9) // Enable DMA Request 9
|
|
#define DMA_ERQ_ERQ10 ((uint32_t)1<<10) // Enable DMA Request 10
|
|
#define DMA_ERQ_ERQ11 ((uint32_t)1<<11) // Enable DMA Request 11
|
|
#define DMA_ERQ_ERQ12 ((uint32_t)1<<12) // Enable DMA Request 12
|
|
#define DMA_ERQ_ERQ13 ((uint32_t)1<<13) // Enable DMA Request 13
|
|
#define DMA_ERQ_ERQ14 ((uint32_t)1<<14) // Enable DMA Request 14
|
|
#define DMA_ERQ_ERQ15 ((uint32_t)1<<15) // Enable DMA Request 15
|
|
#define DMA_EEI *(volatile uint32_t *)0x40008014 // Enable Error Interrupt Register
|
|
#define DMA_EEI_EEI0 ((uint32_t)1<<0) // Enable Error Interrupt 0
|
|
#define DMA_EEI_EEI1 ((uint32_t)1<<1) // Enable Error Interrupt 1
|
|
#define DMA_EEI_EEI2 ((uint32_t)1<<2) // Enable Error Interrupt 2
|
|
#define DMA_EEI_EEI3 ((uint32_t)1<<3) // Enable Error Interrupt 3
|
|
#define DMA_EEI_EEI4 ((uint32_t)1<<4) // Enable Error Interrupt 4
|
|
#define DMA_EEI_EEI5 ((uint32_t)1<<5) // Enable Error Interrupt 5
|
|
#define DMA_EEI_EEI6 ((uint32_t)1<<6) // Enable Error Interrupt 6
|
|
#define DMA_EEI_EEI7 ((uint32_t)1<<7) // Enable Error Interrupt 7
|
|
#define DMA_EEI_EEI8 ((uint32_t)1<<8) // Enable Error Interrupt 8
|
|
#define DMA_EEI_EEI9 ((uint32_t)1<<9) // Enable Error Interrupt 9
|
|
#define DMA_EEI_EEI10 ((uint32_t)1<<10) // Enable Error Interrupt 10
|
|
#define DMA_EEI_EEI11 ((uint32_t)1<<11) // Enable Error Interrupt 11
|
|
#define DMA_EEI_EEI12 ((uint32_t)1<<12) // Enable Error Interrupt 12
|
|
#define DMA_EEI_EEI13 ((uint32_t)1<<13) // Enable Error Interrupt 13
|
|
#define DMA_EEI_EEI14 ((uint32_t)1<<14) // Enable Error Interrupt 14
|
|
#define DMA_EEI_EEI15 ((uint32_t)1<<15) // Enable Error Interrupt 15
|
|
#define DMA_CEEI *(volatile uint8_t *)0x40008018 // Clear Enable Error Interrupt Register
|
|
#define DMA_CEEI_CEEI(n) ((uint8_t)(n & 15)<<0) // Clear Enable Error Interrupt
|
|
#define DMA_CEEI_CAEE ((uint8_t)1<<6) // Clear All Enable Error Interrupts
|
|
#define DMA_CEEI_NOP ((uint8_t)1<<7) // NOP
|
|
#define DMA_SEEI *(volatile uint8_t *)0x40008019 // Set Enable Error Interrupt Register
|
|
#define DMA_SEEI_SEEI(n) ((uint8_t)(n & 15)<<0) // Set Enable Error Interrupt
|
|
#define DMA_SEEI_SAEE ((uint8_t)1<<6) // Set All Enable Error Interrupts
|
|
#define DMA_SEEI_NOP ((uint8_t)1<<7) // NOP
|
|
#define DMA_CERQ *(volatile uint8_t *)0x4000801A // Clear Enable Request Register
|
|
#define DMA_CERQ_CERQ(n) ((uint8_t)(n & 15)<<0) // Clear Enable Request
|
|
#define DMA_CERQ_CAER ((uint8_t)1<<6) // Clear All Enable Requests
|
|
#define DMA_CERQ_NOP ((uint8_t)1<<7) // NOP
|
|
#define DMA_SERQ *(volatile uint8_t *)0x4000801B // Set Enable Request Register
|
|
#define DMA_SERQ_SERQ(n) ((uint8_t)(n & 15)<<0) // Set Enable Request
|
|
#define DMA_SERQ_SAER ((uint8_t)1<<6) // Set All Enable Requests
|
|
#define DMA_SERQ_NOP ((uint8_t)1<<7) // NOP
|
|
#define DMA_CDNE *(volatile uint8_t *)0x4000801C // Clear DONE Status Bit Register
|
|
#define DMA_CDNE_CDNE(n) ((uint8_t)(n & 15)<<0) // Clear Done Bit
|
|
#define DMA_CDNE_CADN ((uint8_t)1<<6) // Clear All Done Bits
|
|
#define DMA_CDNE_NOP ((uint8_t)1<<7) // NOP
|
|
#define DMA_SSRT *(volatile uint8_t *)0x4000801D // Set START Bit Register
|
|
#define DMA_SSRT_SSRT(n) ((uint8_t)(n & 15)<<0) // Set Start Bit
|
|
#define DMA_SSRT_SAST ((uint8_t)1<<6) // Set All Start Bits
|
|
#define DMA_SSRT_NOP ((uint8_t)1<<7) // NOP
|
|
#define DMA_CERR *(volatile uint8_t *)0x4000801E // Clear Error Register
|
|
#define DMA_CERR_CERR(n) ((uint8_t)(n & 15)<<0) // Clear Error Indicator
|
|
#define DMA_CERR_CAEI ((uint8_t)1<<6) // Clear All Error Indicators
|
|
#define DMA_CERR_NOP ((uint8_t)1<<7) // NOP
|
|
#define DMA_CINT *(volatile uint8_t *)0x4000801F // Clear Interrupt Request Register
|
|
#define DMA_CINT_CINT(n) ((uint8_t)(n & 15)<<0) // Clear Interrupt Request
|
|
#define DMA_CINT_CAIR ((uint8_t)1<<6) // Clear All Interrupt Requests
|
|
#define DMA_CINT_NOP ((uint8_t)1<<7) // NOP
|
|
#define DMA_INT *(volatile uint32_t *)0x40008024 // Interrupt Request Register
|
|
#define DMA_INT_INT0 ((uint32_t)1<<0) // Interrupt Request 0
|
|
#define DMA_INT_INT1 ((uint32_t)1<<1) // Interrupt Request 1
|
|
#define DMA_INT_INT2 ((uint32_t)1<<2) // Interrupt Request 2
|
|
#define DMA_INT_INT3 ((uint32_t)1<<3) // Interrupt Request 3
|
|
#define DMA_INT_INT4 ((uint32_t)1<<4) // Interrupt Request 4
|
|
#define DMA_INT_INT5 ((uint32_t)1<<5) // Interrupt Request 5
|
|
#define DMA_INT_INT6 ((uint32_t)1<<6) // Interrupt Request 6
|
|
#define DMA_INT_INT7 ((uint32_t)1<<7) // Interrupt Request 7
|
|
#define DMA_INT_INT8 ((uint32_t)1<<8) // Interrupt Request 8
|
|
#define DMA_INT_INT9 ((uint32_t)1<<9) // Interrupt Request 9
|
|
#define DMA_INT_INT10 ((uint32_t)1<<10) // Interrupt Request 10
|
|
#define DMA_INT_INT11 ((uint32_t)1<<11) // Interrupt Request 11
|
|
#define DMA_INT_INT12 ((uint32_t)1<<12) // Interrupt Request 12
|
|
#define DMA_INT_INT13 ((uint32_t)1<<13) // Interrupt Request 13
|
|
#define DMA_INT_INT14 ((uint32_t)1<<14) // Interrupt Request 14
|
|
#define DMA_INT_INT15 ((uint32_t)1<<15) // Interrupt Request 15
|
|
#define DMA_ERR *(volatile uint32_t *)0x4000802C // Error Register
|
|
#define DMA_ERR_ERR0 ((uint32_t)1<<0) // Error in Channel 0
|
|
#define DMA_ERR_ERR1 ((uint32_t)1<<1) // Error in Channel 1
|
|
#define DMA_ERR_ERR2 ((uint32_t)1<<2) // Error in Channel 2
|
|
#define DMA_ERR_ERR3 ((uint32_t)1<<3) // Error in Channel 3
|
|
#define DMA_ERR_ERR4 ((uint32_t)1<<4) // Error in Channel 4
|
|
#define DMA_ERR_ERR5 ((uint32_t)1<<5) // Error in Channel 5
|
|
#define DMA_ERR_ERR6 ((uint32_t)1<<6) // Error in Channel 6
|
|
#define DMA_ERR_ERR7 ((uint32_t)1<<7) // Error in Channel 7
|
|
#define DMA_ERR_ERR8 ((uint32_t)1<<8) // Error in Channel 8
|
|
#define DMA_ERR_ERR9 ((uint32_t)1<<9) // Error in Channel 9
|
|
#define DMA_ERR_ERR10 ((uint32_t)1<<10) // Error in Channel 10
|
|
#define DMA_ERR_ERR11 ((uint32_t)1<<11) // Error in Channel 11
|
|
#define DMA_ERR_ERR12 ((uint32_t)1<<12) // Error in Channel 12
|
|
#define DMA_ERR_ERR13 ((uint32_t)1<<13) // Error in Channel 13
|
|
#define DMA_ERR_ERR14 ((uint32_t)1<<14) // Error in Channel 14
|
|
#define DMA_ERR_ERR15 ((uint32_t)1<<15) // Error in Channel 15
|
|
#define DMA_HRS *(volatile uint32_t *)0x40008034 // Hardware Request Status Register
|
|
#define DMA_HRS_HRS0 ((uint32_t)1<<0) // Hardware Request Status Channel 0
|
|
#define DMA_HRS_HRS1 ((uint32_t)1<<1) // Hardware Request Status Channel 1
|
|
#define DMA_HRS_HRS2 ((uint32_t)1<<2) // Hardware Request Status Channel 2
|
|
#define DMA_HRS_HRS3 ((uint32_t)1<<3) // Hardware Request Status Channel 3
|
|
#define DMA_HRS_HRS4 ((uint32_t)1<<4) // Hardware Request Status Channel 4
|
|
#define DMA_HRS_HRS5 ((uint32_t)1<<5) // Hardware Request Status Channel 5
|
|
#define DMA_HRS_HRS6 ((uint32_t)1<<6) // Hardware Request Status Channel 6
|
|
#define DMA_HRS_HRS7 ((uint32_t)1<<7) // Hardware Request Status Channel 7
|
|
#define DMA_HRS_HRS8 ((uint32_t)1<<8) // Hardware Request Status Channel 8
|
|
#define DMA_HRS_HRS9 ((uint32_t)1<<9) // Hardware Request Status Channel 9
|
|
#define DMA_HRS_HRS10 ((uint32_t)1<<10) // Hardware Request Status Channel 10
|
|
#define DMA_HRS_HRS11 ((uint32_t)1<<11) // Hardware Request Status Channel 11
|
|
#define DMA_HRS_HRS12 ((uint32_t)1<<12) // Hardware Request Status Channel 12
|
|
#define DMA_HRS_HRS13 ((uint32_t)1<<13) // Hardware Request Status Channel 13
|
|
#define DMA_HRS_HRS14 ((uint32_t)1<<14) // Hardware Request Status Channel 14
|
|
#define DMA_HRS_HRS15 ((uint32_t)1<<15) // Hardware Request Status Channel 15
|
|
#define DMA_DCHPRI3 *(volatile uint8_t *)0x40008100 // Channel n Priority Register
|
|
#define DMA_DCHPRI2 *(volatile uint8_t *)0x40008101 // Channel n Priority Register
|
|
#define DMA_DCHPRI1 *(volatile uint8_t *)0x40008102 // Channel n Priority Register
|
|
#define DMA_DCHPRI0 *(volatile uint8_t *)0x40008103 // Channel n Priority Register
|
|
#define DMA_DCHPRI_CHPRI(n) ((uint8_t)(n & 15)<<0) // Channel Arbitration Priority
|
|
#define DMA_DCHPRI_DPA ((uint8_t)1<<6) // Disable PreEmpt Ability
|
|
#define DMA_DCHPRI_ECP ((uint8_t)1<<7) // Enable PreEmption
|
|
#define DMA_DCHPRI7 *(volatile uint8_t *)0x40008104 // Channel n Priority Register
|
|
#define DMA_DCHPRI6 *(volatile uint8_t *)0x40008105 // Channel n Priority Register
|
|
#define DMA_DCHPRI5 *(volatile uint8_t *)0x40008106 // Channel n Priority Register
|
|
#define DMA_DCHPRI4 *(volatile uint8_t *)0x40008107 // Channel n Priority Register
|
|
#define DMA_DCHPRI11 *(volatile uint8_t *)0x40008108 // Channel n Priority Register
|
|
#define DMA_DCHPRI10 *(volatile uint8_t *)0x40008109 // Channel n Priority Register
|
|
#define DMA_DCHPRI9 *(volatile uint8_t *)0x4000810A // Channel n Priority Register
|
|
#define DMA_DCHPRI8 *(volatile uint8_t *)0x4000810B // Channel n Priority Register
|
|
#define DMA_DCHPRI15 *(volatile uint8_t *)0x4000810C // Channel n Priority Register
|
|
#define DMA_DCHPRI14 *(volatile uint8_t *)0x4000810D // Channel n Priority Register
|
|
#define DMA_DCHPRI13 *(volatile uint8_t *)0x4000810E // Channel n Priority Register
|
|
#define DMA_DCHPRI12 *(volatile uint8_t *)0x4000810F // Channel n Priority Register
|
|
|
|
|
|
#define DMA_TCD_ATTR_SMOD(n) (((n) & 0x1F) << 11)
|
|
#define DMA_TCD_ATTR_SSIZE(n) (((n) & 0x7) << 8)
|
|
#define DMA_TCD_ATTR_DMOD(n) (((n) & 0x1F) << 3)
|
|
#define DMA_TCD_ATTR_DSIZE(n) (((n) & 0x7) << 0)
|
|
#define DMA_TCD_ATTR_SIZE_8BIT 0
|
|
#define DMA_TCD_ATTR_SIZE_16BIT 1
|
|
#define DMA_TCD_ATTR_SIZE_32BIT 2
|
|
#define DMA_TCD_ATTR_SIZE_16BYTE 4
|
|
#define DMA_TCD_ATTR_SIZE_32BYTE 5
|
|
#define DMA_TCD_CSR_BWC(n) (((n) & 0x3) << 14)
|
|
#define DMA_TCD_CSR_MAJORLINKCH(n) (((n) & 0x3) << 8)
|
|
#define DMA_TCD_CSR_DONE 0x0080
|
|
#define DMA_TCD_CSR_ACTIVE 0x0040
|
|
#define DMA_TCD_CSR_MAJORELINK 0x0020
|
|
#define DMA_TCD_CSR_ESG 0x0010
|
|
#define DMA_TCD_CSR_DREQ 0x0008
|
|
#define DMA_TCD_CSR_INTHALF 0x0004
|
|
#define DMA_TCD_CSR_INTMAJOR 0x0002
|
|
#define DMA_TCD_CSR_START 0x0001
|
|
#define DMA_TCD_CITER_MASK ((uint16_t)0x7FFF) // Loop count mask
|
|
#define DMA_TCD_CITER_ELINK ((uint16_t)1<<15) // Enable channel linking on minor-loop complete
|
|
#define DMA_TCD_BITER_MASK ((uint16_t)0x7FFF) // Loop count mask
|
|
#define DMA_TCD_BITER_ELINK ((uint16_t)1<<15) // Enable channel linking on minor-loop complete
|
|
#define DMA_TCD_NBYTES_SMLOE ((uint32_t)1<<31) // Source Minor Loop Offset Enable
|
|
#define DMA_TCD_NBYTES_DMLOE ((uint32_t)1<<30) // Destination Minor Loop Offset Enable
|
|
#define DMA_TCD_NBYTES_MLOFFNO_NBYTES(n) ((uint32_t)(n)) // NBytes transfer count when minor loop disabled
|
|
#define DMA_TCD_NBYTES_MLOFFYES_NBYTES(n) ((uint32_t)(n & 0x1F)) // NBytes transfer count when minor loop enabled
|
|
#define DMA_TCD_NBYTES_MLOFFYES_MLOFF(n) ((uint32_t)(n & 0xFFFFF)<<10) // Offset
|
|
|
|
#define DMA_TCD0_SADDR *(volatile const void * volatile *)0x40009000 // TCD Source Address
|
|
#define DMA_TCD0_SOFF *(volatile int16_t *)0x40009004 // TCD Signed Source Address Offset
|
|
#define DMA_TCD0_ATTR *(volatile uint16_t *)0x40009006 // TCD Transfer Attributes
|
|
#define DMA_TCD0_NBYTES_MLNO *(volatile uint32_t *)0x40009008 // TCD Minor Byte Count (Minor Loop Disabled)
|
|
#define DMA_TCD0_NBYTES_MLOFFNO *(volatile uint32_t *)0x40009008 // TCD Signed Minor Loop Offset (Minor Loop Enabled and Offset Disabled)
|
|
#define DMA_TCD0_NBYTES_MLOFFYES *(volatile uint32_t *)0x40009008 // TCD Signed Minor Loop Offset (Minor Loop and Offset Enabled)
|
|
#define DMA_TCD0_SLAST *(volatile int32_t *)0x4000900C // TCD Last Source Address Adjustment
|
|
#define DMA_TCD0_DADDR *(volatile void * volatile *)0x40009010 // TCD Destination Address
|
|
#define DMA_TCD0_DOFF *(volatile int16_t *)0x40009014 // TCD Signed Destination Address Offset
|
|
#define DMA_TCD0_CITER_ELINKYES *(volatile uint16_t *)0x40009016 // TCD Current Minor Loop Link, Major Loop Count, Channel Linking Enabled
|
|
#define DMA_TCD0_CITER_ELINKNO *(volatile uint16_t *)0x40009016 // ??
|
|
#define DMA_TCD0_DLASTSGA *(volatile int32_t *)0x40009018 // TCD Last Destination Address Adjustment/Scatter Gather Address
|
|
#define DMA_TCD0_CSR *(volatile uint16_t *)0x4000901C // TCD Control and Status
|
|
#define DMA_TCD0_BITER_ELINKYES *(volatile uint16_t *)0x4000901E // TCD Beginning Minor Loop Link, Major Loop Count, Channel Linking Enabled
|
|
#define DMA_TCD0_BITER_ELINKNO *(volatile uint16_t *)0x4000901E // TCD Beginning Minor Loop Link, Major Loop Count, Channel Linking Disabled
|
|
|
|
#define DMA_TCD1_SADDR *(volatile const void * volatile *)0x40009020 // TCD Source Address
|
|
#define DMA_TCD1_SOFF *(volatile int16_t *)0x40009024 // TCD Signed Source Address Offset
|
|
#define DMA_TCD1_ATTR *(volatile uint16_t *)0x40009026 // TCD Transfer Attributes
|
|
#define DMA_TCD1_NBYTES_MLNO *(volatile uint32_t *)0x40009028 // TCD Minor Byte Count, Minor Loop Disabled
|
|
#define DMA_TCD1_NBYTES_MLOFFNO *(volatile uint32_t *)0x40009028 // TCD Signed Minor Loop Offset, Minor Loop Enabled and Offset Disabled
|
|
#define DMA_TCD1_NBYTES_MLOFFYES *(volatile uint32_t *)0x40009028 // TCD Signed Minor Loop Offset, Minor Loop and Offset Enabled
|
|
#define DMA_TCD1_SLAST *(volatile int32_t *)0x4000902C // TCD Last Source Address Adjustment
|
|
#define DMA_TCD1_DADDR *(volatile void * volatile *)0x40009030 // TCD Destination Address
|
|
#define DMA_TCD1_DOFF *(volatile int16_t *)0x40009034 // TCD Signed Destination Address Offset
|
|
#define DMA_TCD1_CITER_ELINKYES *(volatile uint16_t *)0x40009036 // TCD Current Minor Loop Link, Major Loop Count, Channel Linking Enabled
|
|
#define DMA_TCD1_CITER_ELINKNO *(volatile uint16_t *)0x40009036 // ??
|
|
#define DMA_TCD1_DLASTSGA *(volatile int32_t *)0x40009038 // TCD Last Destination Address Adjustment/Scatter Gather Address
|
|
#define DMA_TCD1_CSR *(volatile uint16_t *)0x4000903C // TCD Control and Status
|
|
#define DMA_TCD1_BITER_ELINKYES *(volatile uint16_t *)0x4000903E // TCD Beginning Minor Loop Link, Major Loop Count Channel Linking Enabled
|
|
#define DMA_TCD1_BITER_ELINKNO *(volatile uint16_t *)0x4000903E // TCD Beginning Minor Loop Link, Major Loop Count, Channel Linking Disabled
|
|
|
|
#define DMA_TCD2_SADDR *(volatile const void * volatile *)0x40009040 // TCD Source Address
|
|
#define DMA_TCD2_SOFF *(volatile int16_t *)0x40009044 // TCD Signed Source Address Offset
|
|
#define DMA_TCD2_ATTR *(volatile uint16_t *)0x40009046 // TCD Transfer Attributes
|
|
#define DMA_TCD2_NBYTES_MLNO *(volatile uint32_t *)0x40009048 // TCD Minor Byte Count, Minor Loop Disabled
|
|
#define DMA_TCD2_NBYTES_MLOFFNO *(volatile uint32_t *)0x40009048 // TCD Signed Minor Loop Offset, Minor Loop Enabled and Offset Disabled
|
|
#define DMA_TCD2_NBYTES_MLOFFYES *(volatile uint32_t *)0x40009048 // TCD Signed Minor Loop Offset, Minor Loop and Offset Enabled
|
|
#define DMA_TCD2_SLAST *(volatile int32_t *)0x4000904C // TCD Last Source Address Adjustment
|
|
#define DMA_TCD2_DADDR *(volatile void * volatile *)0x40009050 // TCD Destination Address
|
|
#define DMA_TCD2_DOFF *(volatile int16_t *)0x40009054 // TCD Signed Destination Address Offset
|
|
#define DMA_TCD2_CITER_ELINKYES *(volatile uint16_t *)0x40009056 // TCD Current Minor Loop Link, Major Loop Count, Channel Linking Enabled
|
|
#define DMA_TCD2_CITER_ELINKNO *(volatile uint16_t *)0x40009056 // ??
|
|
#define DMA_TCD2_DLASTSGA *(volatile int32_t *)0x40009058 // TCD Last Destination Address Adjustment/Scatter Gather Address
|
|
#define DMA_TCD2_CSR *(volatile uint16_t *)0x4000905C // TCD Control and Status
|
|
#define DMA_TCD2_BITER_ELINKYES *(volatile uint16_t *)0x4000905E // TCD Beginning Minor Loop Link, Major Loop Count, Channel Linking Enabled
|
|
#define DMA_TCD2_BITER_ELINKNO *(volatile uint16_t *)0x4000905E // TCD Beginning Minor Loop Link, Major Loop Count, Channel Linking Disabled
|
|
|
|
#define DMA_TCD3_SADDR *(volatile const void * volatile *)0x40009060 // TCD Source Address
|
|
#define DMA_TCD3_SOFF *(volatile int16_t *)0x40009064 // TCD Signed Source Address Offset
|
|
#define DMA_TCD3_ATTR *(volatile uint16_t *)0x40009066 // TCD Transfer Attributes
|
|
#define DMA_TCD3_NBYTES_MLNO *(volatile uint32_t *)0x40009068 // TCD Minor Byte Count, Minor Loop Disabled
|
|
#define DMA_TCD3_NBYTES_MLOFFNO *(volatile uint32_t *)0x40009068 // TCD Signed Minor Loop Offset, Minor Loop Enabled and Offset Disabled
|
|
#define DMA_TCD3_NBYTES_MLOFFYES *(volatile uint32_t *)0x40009068 // TCD Signed Minor Loop Offset, Minor Loop and Offset Enabled
|
|
#define DMA_TCD3_SLAST *(volatile int32_t *)0x4000906C // TCD Last Source Address Adjustment
|
|
#define DMA_TCD3_DADDR *(volatile void * volatile *)0x40009070 // TCD Destination Address
|
|
#define DMA_TCD3_DOFF *(volatile int16_t *)0x40009074 // TCD Signed Destination Address Offset
|
|
#define DMA_TCD3_CITER_ELINKYES *(volatile uint16_t *)0x40009076 // TCD Current Minor Loop Link, Major Loop Count, Channel Linking Enabled
|
|
#define DMA_TCD3_CITER_ELINKNO *(volatile uint16_t *)0x40009076 // ??
|
|
#define DMA_TCD3_DLASTSGA *(volatile int32_t *)0x40009078 // TCD Last Destination Address Adjustment/Scatter Gather Address
|
|
#define DMA_TCD3_CSR *(volatile uint16_t *)0x4000907C // TCD Control and Status
|
|
#define DMA_TCD3_BITER_ELINKYES *(volatile uint16_t *)0x4000907E // TCD Beginning Minor Loop Link, Major Loop Count ,Channel Linking Enabled
|
|
#define DMA_TCD3_BITER_ELINKNO *(volatile uint16_t *)0x4000907E // TCD Beginning Minor Loop Link, Major Loop Count ,Channel Linking Disabled
|
|
|
|
#define DMA_TCD4_SADDR *(volatile const void * volatile *)0x40009080 // TCD Source Addr
|
|
#define DMA_TCD4_SOFF *(volatile int16_t *)0x40009084 // TCD Signed Source Address Offset
|
|
#define DMA_TCD4_ATTR *(volatile uint16_t *)0x40009086 // TCD Transfer Attributes
|
|
#define DMA_TCD4_NBYTES_MLNO *(volatile uint32_t *)0x40009088 // TCD Minor Byte Count
|
|
#define DMA_TCD4_NBYTES_MLOFFNO *(volatile uint32_t *)0x40009088 // TCD Signed Minor Loop Offset
|
|
#define DMA_TCD4_NBYTES_MLOFFYES *(volatile uint32_t *)0x40009088 // TCD Signed Minor Loop Offset
|
|
#define DMA_TCD4_SLAST *(volatile int32_t *)0x4000908C // TCD Last Source Addr Adj.
|
|
#define DMA_TCD4_DADDR *(volatile void * volatile *)0x40009090 // TCD Destination Address
|
|
#define DMA_TCD4_DOFF *(volatile int16_t *)0x40009094 // TCD Signed Dest Address Offset
|
|
#define DMA_TCD4_CITER_ELINKYES *(volatile uint16_t *)0x40009096 // TCD Current Minor Loop Link
|
|
#define DMA_TCD4_CITER_ELINKNO *(volatile uint16_t *)0x40009096 // ??
|
|
#define DMA_TCD4_DLASTSGA *(volatile int32_t *)0x40009098 // TCD Last Destination Addr Adj
|
|
#define DMA_TCD4_CSR *(volatile uint16_t *)0x4000909C // TCD Control and Status
|
|
#define DMA_TCD4_BITER_ELINKYES *(volatile uint16_t *)0x4000909E // TCD Beginning Minor Loop Link
|
|
#define DMA_TCD4_BITER_ELINKNO *(volatile uint16_t *)0x4000909E // TCD Beginning Minor Loop Link
|
|
|
|
#define DMA_TCD5_SADDR *(volatile const void * volatile *)0x400090A0 // TCD Source Addr
|
|
#define DMA_TCD5_SOFF *(volatile int16_t *)0x400090A4 // TCD Signed Source Address Offset
|
|
#define DMA_TCD5_ATTR *(volatile uint16_t *)0x400090A6 // TCD Transfer Attributes
|
|
#define DMA_TCD5_NBYTES_MLNO *(volatile uint32_t *)0x400090A8 // TCD Minor Byte Count
|
|
#define DMA_TCD5_NBYTES_MLOFFNO *(volatile uint32_t *)0x400090A8 // TCD Signed Minor Loop Offset
|
|
#define DMA_TCD5_NBYTES_MLOFFYES *(volatile uint32_t *)0x400090A8 // TCD Signed Minor Loop Offset
|
|
#define DMA_TCD5_SLAST *(volatile int32_t *)0x400090AC // TCD Last Source Addr Adj.
|
|
#define DMA_TCD5_DADDR *(volatile void * volatile *)0x400090B0 // TCD Destination Address
|
|
#define DMA_TCD5_DOFF *(volatile int16_t *)0x400090B4 // TCD Signed Dest Address Offset
|
|
#define DMA_TCD5_CITER_ELINKYES *(volatile uint16_t *)0x400090B6 // TCD Current Minor Loop Link
|
|
#define DMA_TCD5_CITER_ELINKNO *(volatile uint16_t *)0x400090B6 // ??
|
|
#define DMA_TCD5_DLASTSGA *(volatile int32_t *)0x400090B8 // TCD Last Destination Addr Adj
|
|
#define DMA_TCD5_CSR *(volatile uint16_t *)0x400090BC // TCD Control and Status
|
|
#define DMA_TCD5_BITER_ELINKYES *(volatile uint16_t *)0x400090BE // TCD Beginning Minor Loop Link
|
|
#define DMA_TCD5_BITER_ELINKNO *(volatile uint16_t *)0x400090BE // TCD Beginning Minor Loop Link
|
|
|
|
#define DMA_TCD6_SADDR *(volatile const void * volatile *)0x400090C0 // TCD Source Addr
|
|
#define DMA_TCD6_SOFF *(volatile int16_t *)0x400090C4 // TCD Signed Source Address Offset
|
|
#define DMA_TCD6_ATTR *(volatile uint16_t *)0x400090C6 // TCD Transfer Attributes
|
|
#define DMA_TCD6_NBYTES_MLNO *(volatile uint32_t *)0x400090C8 // TCD Minor Byte Count
|
|
#define DMA_TCD6_NBYTES_MLOFFNO *(volatile uint32_t *)0x400090C8 // TCD Signed Minor Loop Offset
|
|
#define DMA_TCD6_NBYTES_MLOFFYES *(volatile uint32_t *)0x400090C8 // TCD Signed Minor Loop Offset
|
|
#define DMA_TCD6_SLAST *(volatile int32_t *)0x400090CC // TCD Last Source Addr Adj.
|
|
#define DMA_TCD6_DADDR *(volatile void * volatile *)0x400090D0 // TCD Destination Address
|
|
#define DMA_TCD6_DOFF *(volatile int16_t *)0x400090D4 // TCD Signed Dest Address Offset
|
|
#define DMA_TCD6_CITER_ELINKYES *(volatile uint16_t *)0x400090D6 // TCD Current Minor Loop Link
|
|
#define DMA_TCD6_CITER_ELINKNO *(volatile uint16_t *)0x400090D6 // ??
|
|
#define DMA_TCD6_DLASTSGA *(volatile int32_t *)0x400090D8 // TCD Last Destination Addr Adj
|
|
#define DMA_TCD6_CSR *(volatile uint16_t *)0x400090DC // TCD Control and Status
|
|
#define DMA_TCD6_BITER_ELINKYES *(volatile uint16_t *)0x400090DE // TCD Beginning Minor Loop Link
|
|
#define DMA_TCD6_BITER_ELINKNO *(volatile uint16_t *)0x400090DE // TCD Beginning Minor Loop Link
|
|
|
|
#define DMA_TCD7_SADDR *(volatile const void * volatile *)0x400090E0 // TCD Source Addr
|
|
#define DMA_TCD7_SOFF *(volatile int16_t *)0x400090E4 // TCD Signed Source Address Offset
|
|
#define DMA_TCD7_ATTR *(volatile uint16_t *)0x400090E6 // TCD Transfer Attributes
|
|
#define DMA_TCD7_NBYTES_MLNO *(volatile uint32_t *)0x400090E8 // TCD Minor Byte Count
|
|
#define DMA_TCD7_NBYTES_MLOFFNO *(volatile uint32_t *)0x400090E8 // TCD Signed Minor Loop Offset
|
|
#define DMA_TCD7_NBYTES_MLOFFYES *(volatile uint32_t *)0x400090E8 // TCD Signed Minor Loop Offset
|
|
#define DMA_TCD7_SLAST *(volatile int32_t *)0x400090EC // TCD Last Source Addr Adj.
|
|
#define DMA_TCD7_DADDR *(volatile void * volatile *)0x400090F0 // TCD Destination Address
|
|
#define DMA_TCD7_DOFF *(volatile int16_t *)0x400090F4 // TCD Signed Dest Address Offset
|
|
#define DMA_TCD7_CITER_ELINKYES *(volatile uint16_t *)0x400090F6 // TCD Current Minor Loop Link
|
|
#define DMA_TCD7_CITER_ELINKNO *(volatile uint16_t *)0x400090F6 // ??
|
|
#define DMA_TCD7_DLASTSGA *(volatile int32_t *)0x400090F8 // TCD Last Destination Addr Adj
|
|
#define DMA_TCD7_CSR *(volatile uint16_t *)0x400090FC // TCD Control and Status
|
|
#define DMA_TCD7_BITER_ELINKYES *(volatile uint16_t *)0x400090FE // TCD Beginning Minor Loop Link
|
|
#define DMA_TCD7_BITER_ELINKNO *(volatile uint16_t *)0x400090FE // TCD Beginning Minor Loop Link
|
|
|
|
#define DMA_TCD8_SADDR *(volatile const void * volatile *)0x40009100 // TCD Source Addr
|
|
#define DMA_TCD8_SOFF *(volatile int16_t *)0x40009104 // TCD Signed Source Address Offset
|
|
#define DMA_TCD8_ATTR *(volatile uint16_t *)0x40009106 // TCD Transfer Attributes
|
|
#define DMA_TCD8_NBYTES_MLNO *(volatile uint32_t *)0x40009108 // TCD Minor Byte Count
|
|
#define DMA_TCD8_NBYTES_MLOFFNO *(volatile uint32_t *)0x40009108 // TCD Signed Minor Loop Offset
|
|
#define DMA_TCD8_NBYTES_MLOFFYES *(volatile uint32_t *)0x40009108 // TCD Signed Minor Loop Offset
|
|
#define DMA_TCD8_SLAST *(volatile int32_t *)0x4000910C // TCD Last Source Addr Adj.
|
|
#define DMA_TCD8_DADDR *(volatile void * volatile *)0x40009110 // TCD Destination Address
|
|
#define DMA_TCD8_DOFF *(volatile int16_t *)0x40009114 // TCD Signed Dest Address Offset
|
|
#define DMA_TCD8_CITER_ELINKYES *(volatile uint16_t *)0x40009116 // TCD Current Minor Loop Link
|
|
#define DMA_TCD8_CITER_ELINKNO *(volatile uint16_t *)0x40009116 // ??
|
|
#define DMA_TCD8_DLASTSGA *(volatile int32_t *)0x40009118 // TCD Last Destination Addr Adj
|
|
#define DMA_TCD8_CSR *(volatile uint16_t *)0x4000911C // TCD Control and Status
|
|
#define DMA_TCD8_BITER_ELINKYES *(volatile uint16_t *)0x4000911E // TCD Beginning Minor Loop Link
|
|
#define DMA_TCD8_BITER_ELINKNO *(volatile uint16_t *)0x4000911E // TCD Beginning Minor Loop Link
|
|
|
|
#define DMA_TCD9_SADDR *(volatile const void * volatile *)0x40009120 // TCD Source Addr
|
|
#define DMA_TCD9_SOFF *(volatile int16_t *)0x40009124 // TCD Signed Source Address Offset
|
|
#define DMA_TCD9_ATTR *(volatile uint16_t *)0x40009126 // TCD Transfer Attributes
|
|
#define DMA_TCD9_NBYTES_MLNO *(volatile uint32_t *)0x40009128 // TCD Minor Byte Count
|
|
#define DMA_TCD9_NBYTES_MLOFFNO *(volatile uint32_t *)0x40009128 // TCD Signed Minor Loop Offset
|
|
#define DMA_TCD9_NBYTES_MLOFFYES *(volatile uint32_t *)0x40009128 // TCD Signed Minor Loop Offset
|
|
#define DMA_TCD9_SLAST *(volatile int32_t *)0x4000912C // TCD Last Source Addr Adj.
|
|
#define DMA_TCD9_DADDR *(volatile void * volatile *)0x40009130 // TCD Destination Address
|
|
#define DMA_TCD9_DOFF *(volatile int16_t *)0x40009134 // TCD Signed Dest Address Offset
|
|
#define DMA_TCD9_CITER_ELINKYES *(volatile uint16_t *)0x40009136 // TCD Current Minor Loop Link
|
|
#define DMA_TCD9_CITER_ELINKNO *(volatile uint16_t *)0x40009136 // ??
|
|
#define DMA_TCD9_DLASTSGA *(volatile int32_t *)0x40009138 // TCD Last Destination Addr Adj
|
|
#define DMA_TCD9_CSR *(volatile uint16_t *)0x4000913C // TCD Control and Status
|
|
#define DMA_TCD9_BITER_ELINKYES *(volatile uint16_t *)0x4000913E // TCD Beginning Minor Loop Link
|
|
#define DMA_TCD9_BITER_ELINKNO *(volatile uint16_t *)0x4000913E // TCD Beginning Minor Loop Link
|
|
|
|
#define DMA_TCD10_SADDR *(volatile const void * volatile *)0x40009140 // TCD Source Addr
|
|
#define DMA_TCD10_SOFF *(volatile int16_t *)0x40009144 // TCD Signed Source Address Offset
|
|
#define DMA_TCD10_ATTR *(volatile uint16_t *)0x40009146 // TCD Transfer Attributes
|
|
#define DMA_TCD10_NBYTES_MLNO *(volatile uint32_t *)0x40009148 // TCD Minor Byte Count
|
|
#define DMA_TCD10_NBYTES_MLOFFNO *(volatile uint32_t *)0x40009148 // TCD Signed Minor Loop Offset
|
|
#define DMA_TCD10_NBYTES_MLOFFYES *(volatile uint32_t *)0x40009148 // TCD Signed Minor Loop Offset
|
|
#define DMA_TCD10_SLAST *(volatile int32_t *)0x4000914C // TCD Last Source Addr Adj.
|
|
#define DMA_TCD10_DADDR *(volatile void * volatile *)0x40009150 // TCD Destination Address
|
|
#define DMA_TCD10_DOFF *(volatile int16_t *)0x40009154 // TCD Signed Dest Address Offset
|
|
#define DMA_TCD10_CITER_ELINKYES *(volatile uint16_t *)0x40009156 // TCD Current Minor Loop Link
|
|
#define DMA_TCD10_CITER_ELINKNO *(volatile uint16_t *)0x40009156 // ??
|
|
#define DMA_TCD10_DLASTSGA *(volatile int32_t *)0x40009158 // TCD Last Destination Addr Adj
|
|
#define DMA_TCD10_CSR *(volatile uint16_t *)0x4000915C // TCD Control and Status
|
|
#define DMA_TCD10_BITER_ELINKYES *(volatile uint16_t *)0x4000915E // TCD Beginning Minor Loop Link
|
|
#define DMA_TCD10_BITER_ELINKNO *(volatile uint16_t *)0x4000915E // TCD Beginning Minor Loop Link
|
|
|
|
#define DMA_TCD11_SADDR *(volatile const void * volatile *)0x40009160 // TCD Source Addr
|
|
#define DMA_TCD11_SOFF *(volatile int16_t *)0x40009164 // TCD Signed Source Address Offset
|
|
#define DMA_TCD11_ATTR *(volatile uint16_t *)0x40009166 // TCD Transfer Attributes
|
|
#define DMA_TCD11_NBYTES_MLNO *(volatile uint32_t *)0x40009168 // TCD Minor Byte Count
|
|
#define DMA_TCD11_NBYTES_MLOFFNO *(volatile uint32_t *)0x40009168 // TCD Signed Minor Loop Offset
|
|
#define DMA_TCD11_NBYTES_MLOFFYES *(volatile uint32_t *)0x40009168 // TCD Signed Minor Loop Offset
|
|
#define DMA_TCD11_SLAST *(volatile int32_t *)0x4000916C // TCD Last Source Addr Adj.
|
|
#define DMA_TCD11_DADDR *(volatile void * volatile *)0x40009170 // TCD Destination Address
|
|
#define DMA_TCD11_DOFF *(volatile int16_t *)0x40009174 // TCD Signed Dest Address Offset
|
|
#define DMA_TCD11_CITER_ELINKYES *(volatile uint16_t *)0x40009176 // TCD Current Minor Loop Link
|
|
#define DMA_TCD11_CITER_ELINKNO *(volatile uint16_t *)0x40009176 // ??
|
|
#define DMA_TCD11_DLASTSGA *(volatile int32_t *)0x40009178 // TCD Last Destination Addr Adj
|
|
#define DMA_TCD11_CSR *(volatile uint16_t *)0x4000917C // TCD Control and Status
|
|
#define DMA_TCD11_BITER_ELINKYES *(volatile uint16_t *)0x4000917E // TCD Beginning Minor Loop Link
|
|
#define DMA_TCD11_BITER_ELINKNO *(volatile uint16_t *)0x4000917E // TCD Beginning Minor Loop Link
|
|
|
|
#define DMA_TCD12_SADDR *(volatile const void * volatile *)0x40009180 // TCD Source Addr
|
|
#define DMA_TCD12_SOFF *(volatile int16_t *)0x40009184 // TCD Signed Source Address Offset
|
|
#define DMA_TCD12_ATTR *(volatile uint16_t *)0x40009186 // TCD Transfer Attributes
|
|
#define DMA_TCD12_NBYTES_MLNO *(volatile uint32_t *)0x40009188 // TCD Minor Byte Count
|
|
#define DMA_TCD12_NBYTES_MLOFFNO *(volatile uint32_t *)0x40009188 // TCD Signed Minor Loop Offset
|
|
#define DMA_TCD12_NBYTES_MLOFFYES *(volatile uint32_t *)0x40009188 // TCD Signed Minor Loop Offset
|
|
#define DMA_TCD12_SLAST *(volatile int32_t *)0x4000918C // TCD Last Source Addr Adj.
|
|
#define DMA_TCD12_DADDR *(volatile void * volatile *)0x40009190 // TCD Destination Address
|
|
#define DMA_TCD12_DOFF *(volatile int16_t *)0x40009194 // TCD Signed Dest Address Offset
|
|
#define DMA_TCD12_CITER_ELINKYES *(volatile uint16_t *)0x40009196 // TCD Current Minor Loop Link
|
|
#define DMA_TCD12_CITER_ELINKNO *(volatile uint16_t *)0x40009196 // ??
|
|
#define DMA_TCD12_DLASTSGA *(volatile int32_t *)0x40009198 // TCD Last Destination Addr Adj
|
|
#define DMA_TCD12_CSR *(volatile uint16_t *)0x4000919C // TCD Control and Status
|
|
#define DMA_TCD12_BITER_ELINKYES *(volatile uint16_t *)0x4000919E // TCD Beginning Minor Loop Link
|
|
#define DMA_TCD12_BITER_ELINKNO *(volatile uint16_t *)0x4000919E // TCD Beginning Minor Loop Link
|
|
|
|
#define DMA_TCD13_SADDR *(volatile const void * volatile *)0x400091A0 // TCD Source Addr
|
|
#define DMA_TCD13_SOFF *(volatile int16_t *)0x400091A4 // TCD Signed Source Address Offset
|
|
#define DMA_TCD13_ATTR *(volatile uint16_t *)0x400091A6 // TCD Transfer Attributes
|
|
#define DMA_TCD13_NBYTES_MLNO *(volatile uint32_t *)0x400091A8 // TCD Minor Byte Count
|
|
#define DMA_TCD13_NBYTES_MLOFFNO *(volatile uint32_t *)0x400091A8 // TCD Signed Minor Loop Offset
|
|
#define DMA_TCD13_NBYTES_MLOFFYES *(volatile uint32_t *)0x400091A8 // TCD Signed Minor Loop Offset
|
|
#define DMA_TCD13_SLAST *(volatile int32_t *)0x400091AC // TCD Last Source Addr Adj.
|
|
#define DMA_TCD13_DADDR *(volatile void * volatile *)0x400091B0 // TCD Destination Address
|
|
#define DMA_TCD13_DOFF *(volatile int16_t *)0x400091B4 // TCD Signed Dest Address Offset
|
|
#define DMA_TCD13_CITER_ELINKYES *(volatile uint16_t *)0x400091B6 // TCD Current Minor Loop Link
|
|
#define DMA_TCD13_CITER_ELINKNO *(volatile uint16_t *)0x400091B6 // ??
|
|
#define DMA_TCD13_DLASTSGA *(volatile int32_t *)0x400091B8 // TCD Last Destination Addr Adj
|
|
#define DMA_TCD13_CSR *(volatile uint16_t *)0x400091BC // TCD Control and Status
|
|
#define DMA_TCD13_BITER_ELINKYES *(volatile uint16_t *)0x400091BE // TCD Beginning Minor Loop Link
|
|
#define DMA_TCD13_BITER_ELINKNO *(volatile uint16_t *)0x400091BE // TCD Beginning Minor Loop Link
|
|
|
|
#define DMA_TCD14_SADDR *(volatile const void * volatile *)0x400091C0 // TCD Source Addr
|
|
#define DMA_TCD14_SOFF *(volatile int16_t *)0x400091C4 // TCD Signed Source Address Offset
|
|
#define DMA_TCD14_ATTR *(volatile uint16_t *)0x400091C6 // TCD Transfer Attributes
|
|
#define DMA_TCD14_NBYTES_MLNO *(volatile uint32_t *)0x400091C8 // TCD Minor Byte Count
|
|
#define DMA_TCD14_NBYTES_MLOFFNO *(volatile uint32_t *)0x400091C8 // TCD Signed Minor Loop Offset
|
|
#define DMA_TCD14_NBYTES_MLOFFYES *(volatile uint32_t *)0x400091C8 // TCD Signed Minor Loop Offset
|
|
#define DMA_TCD14_SLAST *(volatile int32_t *)0x400091CC // TCD Last Source Addr Adj.
|
|
#define DMA_TCD14_DADDR *(volatile void * volatile *)0x400091D0 // TCD Destination Address
|
|
#define DMA_TCD14_DOFF *(volatile int16_t *)0x400091D4 // TCD Signed Dest Address Offset
|
|
#define DMA_TCD14_CITER_ELINKYES *(volatile uint16_t *)0x400091D6 // TCD Current Minor Loop Link
|
|
#define DMA_TCD14_CITER_ELINKNO *(volatile uint16_t *)0x400091D6 // ??
|
|
#define DMA_TCD14_DLASTSGA *(volatile int32_t *)0x400091D8 // TCD Last Destination Addr Adj
|
|
#define DMA_TCD14_CSR *(volatile uint16_t *)0x400091DC // TCD Control and Status
|
|
#define DMA_TCD14_BITER_ELINKYES *(volatile uint16_t *)0x400091DE // TCD Beginning Minor Loop Link
|
|
#define DMA_TCD14_BITER_ELINKNO *(volatile uint16_t *)0x400091DE // TCD Beginning Minor Loop Link
|
|
|
|
#define DMA_TCD15_SADDR *(volatile const void * volatile *)0x400091E0 // TCD Source Addr
|
|
#define DMA_TCD15_SOFF *(volatile int16_t *)0x400091E4 // TCD Signed Source Address Offset
|
|
#define DMA_TCD15_ATTR *(volatile uint16_t *)0x400091E6 // TCD Transfer Attributes
|
|
#define DMA_TCD15_NBYTES_MLNO *(volatile uint32_t *)0x400091E8 // TCD Minor Byte Count
|
|
#define DMA_TCD15_NBYTES_MLOFFNO *(volatile uint32_t *)0x400091E8 // TCD Signed Minor Loop Offset
|
|
#define DMA_TCD15_NBYTES_MLOFFYES *(volatile uint32_t *)0x400091E8 // TCD Signed Minor Loop Offset
|
|
#define DMA_TCD15_SLAST *(volatile int32_t *)0x400091EC // TCD Last Source Addr Adj.
|
|
#define DMA_TCD15_DADDR *(volatile void * volatile *)0x400091F0 // TCD Destination Address
|
|
#define DMA_TCD15_DOFF *(volatile int16_t *)0x400091F4 // TCD Signed Dest Address Offset
|
|
#define DMA_TCD15_CITER_ELINKYES *(volatile uint16_t *)0x400091F6 // TCD Current Minor Loop Link
|
|
#define DMA_TCD15_CITER_ELINKNO *(volatile uint16_t *)0x400091F6 // ??
|
|
#define DMA_TCD15_DLASTSGA *(volatile int32_t *)0x400091F8 // TCD Last Destination Addr Adj
|
|
#define DMA_TCD15_CSR *(volatile uint16_t *)0x400091FC // TCD Control and Status
|
|
#define DMA_TCD15_BITER_ELINKYES *(volatile uint16_t *)0x400091FE // TCD Beginning Minor Loop Link
|
|
#define DMA_TCD15_BITER_ELINKNO *(volatile uint16_t *)0x400091FE // TCD Beginning Minor Loop Link
|
|
|
|
|
|
// Chapter 22: External Watchdog Monitor (EWM)
|
|
#define EWM_CTRL *(volatile uint8_t *)0x40061000 // Control Register
|
|
#define EWM_SERV *(volatile uint8_t *)0x40061001 // Service Register
|
|
#define EWM_CMPL *(volatile uint8_t *)0x40061002 // Compare Low Register
|
|
#define EWM_CMPH *(volatile uint8_t *)0x40061003 // Compare High Register
|
|
|
|
// Chapter 23: Watchdog Timer (WDOG)
|
|
#define WDOG_STCTRLH *(volatile uint16_t *)0x40052000 // Watchdog Status and Control Register High
|
|
#define WDOG_STCTRLH_DISTESTWDOG (uint16_t)0x4000 // Allows the WDOG's functional test mode to be disabled permanently.
|
|
#define WDOG_STCTRLH_BYTESEL(n) (uint16_t)(((n) & 3) << 12) // selects the byte to be tested when the watchdog is in the byte test mode.
|
|
#define WDOG_STCTRLH_TESTSEL (uint16_t)0x0800
|
|
#define WDOG_STCTRLH_TESTWDOG (uint16_t)0x0400
|
|
#define WDOG_STCTRLH_WAITEN (uint16_t)0x0080
|
|
#define WDOG_STCTRLH_STOPEN (uint16_t)0x0040
|
|
#define WDOG_STCTRLH_DBGEN (uint16_t)0x0020
|
|
#define WDOG_STCTRLH_ALLOWUPDATE (uint16_t)0x0010
|
|
#define WDOG_STCTRLH_WINEN (uint16_t)0x0008
|
|
#define WDOG_STCTRLH_IRQRSTEN (uint16_t)0x0004
|
|
#define WDOG_STCTRLH_CLKSRC (uint16_t)0x0002
|
|
#define WDOG_STCTRLH_WDOGEN (uint16_t)0x0001
|
|
#define WDOG_STCTRLL *(volatile uint16_t *)0x40052002 // Watchdog Status and Control Register Low
|
|
#define WDOG_TOVALH *(volatile uint16_t *)0x40052004 // Watchdog Time-out Value Register High
|
|
#define WDOG_TOVALL *(volatile uint16_t *)0x40052006 // Watchdog Time-out Value Register Low
|
|
#define WDOG_WINH *(volatile uint16_t *)0x40052008 // Watchdog Window Register High
|
|
#define WDOG_WINL *(volatile uint16_t *)0x4005200A // Watchdog Window Register Low
|
|
#define WDOG_REFRESH *(volatile uint16_t *)0x4005200C // Watchdog Refresh register
|
|
#define WDOG_UNLOCK *(volatile uint16_t *)0x4005200E // Watchdog Unlock register
|
|
#define WDOG_UNLOCK_SEQ1 (uint16_t)0xC520
|
|
#define WDOG_UNLOCK_SEQ2 (uint16_t)0xD928
|
|
#define WDOG_TMROUTH *(volatile uint16_t *)0x40052010 // Watchdog Timer Output Register High
|
|
#define WDOG_TMROUTL *(volatile uint16_t *)0x40052012 // Watchdog Timer Output Register Low
|
|
#define WDOG_RSTCNT *(volatile uint16_t *)0x40052014 // Watchdog Reset Count register
|
|
#define WDOG_PRESC *(volatile uint16_t *)0x40052016 // Watchdog Prescaler register
|
|
|
|
// Chapter 24: Multipurpose Clock Generator (MCG)
|
|
#define MCG_C1 *(volatile uint8_t *)0x40064000 // MCG Control 1 Register
|
|
#define MCG_C1_IREFSTEN (uint8_t)0x01 // Internal Reference Stop Enable, Controls whether or not the internal reference clock remains enabled when the MCG enters Stop mode.
|
|
#define MCG_C1_IRCLKEN (uint8_t)0x02 // Internal Reference Clock Enable, Enables the internal reference clock for use as MCGIRCLK.
|
|
#define MCG_C1_IREFS (uint8_t)0x04 // Internal Reference Select, Selects the reference clock source for the FLL.
|
|
#define MCG_C1_FRDIV(n) (uint8_t)(((n) & 0x07) << 3) // FLL External Reference Divider, Selects the amount to divide down the external reference clock for the FLL
|
|
#define MCG_C1_CLKS(n) (uint8_t)(((n) & 0x03) << 6) // Clock Source Select, Selects the clock source for MCGOUTCLK
|
|
#define MCG_C2 *(volatile uint8_t *)0x40064001 // MCG Control 2 Register
|
|
#define MCG_C2_IRCS (uint8_t)0x01 // Internal Reference Clock Select, Selects between the fast or slow internal reference clock source.
|
|
#define MCG_C2_LP (uint8_t)0x02 // Low Power Select, Controls whether the FLL or PLL is disabled in BLPI and BLPE modes.
|
|
#define MCG_C2_EREFS (uint8_t)0x04 // External Reference Select, Selects the source for the external reference clock.
|
|
#define MCG_C2_HGO0 (uint8_t)0x08 // High Gain Oscillator Select, Controls the crystal oscillator mode of operation
|
|
#define MCG_C2_RANGE0(n) (uint8_t)(((n) & 0x03) << 4) // Frequency Range Select, Selects the frequency range for the crystal oscillator
|
|
#define MCG_C2_LOCRE0 (uint8_t)0x80 // Loss of Clock Reset Enable, Determines whether an interrupt or a reset request is made following a loss of OSC0
|
|
#define MCG_C3 *(volatile uint8_t *)0x40064002 // MCG Control 3 Register
|
|
#define MCG_C3_SCTRIM(n) (uint8_t)(n) // Slow Internal Reference Clock Trim Setting
|
|
#define MCG_C4 *(volatile uint8_t *)0x40064003 // MCG Control 4 Register
|
|
#define MCG_C4_SCFTRIM (uint8_t)0x01 // Slow Internal Reference Clock Fine Trim
|
|
#define MCG_C4_FCTRIM(n) (uint8_t)(((n) & 0x0F) << 1) // Fast Internal Reference Clock Trim Setting
|
|
#define MCG_C4_DRST_DRS(n) (uint8_t)(((n) & 0x03) << 5) // DCO Range Select
|
|
#define MCG_C4_DMX32 (uint8_t)0x80 // DCO Maximum Frequency with 32.768 kHz Reference, controls whether the DCO frequency range is narrowed
|
|
#define MCG_C5 *(volatile uint8_t *)0x40064004 // MCG Control 5 Register
|
|
#define MCG_C5_PRDIV0(n) (uint8_t)((n) & 0x1F) // PLL External Reference Divider
|
|
#define MCG_C5_PLLSTEN0 (uint8_t)0x20 // PLL Stop Enable
|
|
#define MCG_C5_PLLCLKEN0 (uint8_t)0x40 // PLL Clock Enable
|
|
#define MCG_C6 *(volatile uint8_t *)0x40064005 // MCG Control 6 Register
|
|
#define MCG_C6_VDIV0(n) (uint8_t)((n) & 0x1F) // VCO 0 Divider
|
|
#define MCG_C6_CME0 (uint8_t)0x20 // Clock Monitor Enable
|
|
#define MCG_C6_PLLS (uint8_t)0x40 // PLL Select, Controls whether the PLL or FLL output is selected as the MCG source when CLKS[1:0]=00.
|
|
#define MCG_C6_LOLIE0 (uint8_t)0x80 // Loss of Lock Interrrupt Enable
|
|
#define MCG_S *(volatile uint8_t *)0x40064006 // MCG Status Register
|
|
#define MCG_S_IRCST (uint8_t)0x01 // Internal Reference Clock Status
|
|
#define MCG_S_OSCINIT0 (uint8_t)0x02 // OSC Initialization, resets to 0, is set to 1 after the initialization cycles of the crystal oscillator
|
|
#define MCG_S_CLKST(n) (uint8_t)(((n) & 0x03) << 2) // Clock Mode Status, 0=FLL is selected, 1= Internal ref, 2=External ref, 3=PLL
|
|
#define MCG_S_CLKST_MASK (uint8_t)0x0C
|
|
#define MCG_S_IREFST (uint8_t)0x10 // Internal Reference Status
|
|
#define MCG_S_PLLST (uint8_t)0x20 // PLL Select Status
|
|
#define MCG_S_LOCK0 (uint8_t)0x40 // Lock Status, 0=PLL Unlocked, 1=PLL Locked
|
|
#define MCG_S_LOLS0 (uint8_t)0x80 // Loss of Lock Status
|
|
#define MCG_SC *(volatile uint8_t *)0x40064008 // MCG Status and Control Register
|
|
#define MCG_SC_LOCS0 (uint8_t)0x01 // OSC0 Loss of Clock Status
|
|
#define MCG_SC_FCRDIV(n) (uint8_t)(((n) & 0x07) << 1) // Fast Clock Internal Reference Divider
|
|
#define MCG_SC_FLTPRSRV (uint8_t)0x10 // FLL Filter Preserve Enable
|
|
#define MCG_SC_ATMF (uint8_t)0x20 // Automatic Trim Machine Fail Flag
|
|
#define MCG_SC_ATMS (uint8_t)0x40 // Automatic Trim Machine Select
|
|
#define MCG_SC_ATME (uint8_t)0x80 // Automatic Trim Machine Enable
|
|
#define MCG_ATCVH *(volatile uint8_t *)0x4006400A // MCG Auto Trim Compare Value High Register
|
|
#define MCG_ATCVL *(volatile uint8_t *)0x4006400B // MCG Auto Trim Compare Value Low Register
|
|
#define MCG_C7 *(volatile uint8_t *)0x4006400C // MCG Control 7 Register
|
|
#define MCG_C8 *(volatile uint8_t *)0x4006400D // MCG Control 8 Register
|
|
|
|
// Chapter 25: Oscillator (OSC)
|
|
#define OSC0_CR *(volatile uint8_t *)0x40065000 // OSC Control Register
|
|
#define OSC_SC16P (uint8_t)0x01 // Oscillator 16 pF Capacitor Load Configure
|
|
#define OSC_SC8P (uint8_t)0x02 // Oscillator 8 pF Capacitor Load Configure
|
|
#define OSC_SC4P (uint8_t)0x04 // Oscillator 4 pF Capacitor Load Configure
|
|
#define OSC_SC2P (uint8_t)0x08 // Oscillator 2 pF Capacitor Load Configure
|
|
#define OSC_EREFSTEN (uint8_t)0x20 // External Reference Stop Enable, Controls whether or not the external reference clock (OSCERCLK) remains enabled when MCU enters Stop mode.
|
|
#define OSC_ERCLKEN (uint8_t)0x80 // External Reference Enable, Enables external reference clock (OSCERCLK).
|
|
|
|
// Chapter 27: Flash Memory Controller (FMC)
|
|
#define FMC_PFAPR *(volatile uint32_t *)0x4001F000 // Flash Access Protection
|
|
#define FMC_PFB0CR *(volatile uint32_t *)0x4001F004 // Flash Control
|
|
#define FMC_TAGVDW0S0 *(volatile uint32_t *)0x4001F100 // Cache Tag Storage
|
|
#define FMC_TAGVDW0S1 *(volatile uint32_t *)0x4001F104 // Cache Tag Storage
|
|
#define FMC_TAGVDW1S0 *(volatile uint32_t *)0x4001F108 // Cache Tag Storage
|
|
#define FMC_TAGVDW1S1 *(volatile uint32_t *)0x4001F10C // Cache Tag Storage
|
|
#define FMC_TAGVDW2S0 *(volatile uint32_t *)0x4001F110 // Cache Tag Storage
|
|
#define FMC_TAGVDW2S1 *(volatile uint32_t *)0x4001F114 // Cache Tag Storage
|
|
#define FMC_TAGVDW3S0 *(volatile uint32_t *)0x4001F118 // Cache Tag Storage
|
|
#define FMC_TAGVDW3S1 *(volatile uint32_t *)0x4001F11C // Cache Tag Storage
|
|
#define FMC_DATAW0S0 *(volatile uint32_t *)0x4001F200 // Cache Data Storage
|
|
#define FMC_DATAW0S1 *(volatile uint32_t *)0x4001F204 // Cache Data Storage
|
|
#define FMC_DATAW1S0 *(volatile uint32_t *)0x4001F208 // Cache Data Storage
|
|
#define FMC_DATAW1S1 *(volatile uint32_t *)0x4001F20C // Cache Data Storage
|
|
#define FMC_DATAW2S0 *(volatile uint32_t *)0x4001F210 // Cache Data Storage
|
|
#define FMC_DATAW2S1 *(volatile uint32_t *)0x4001F214 // Cache Data Storage
|
|
#define FMC_DATAW3S0 *(volatile uint32_t *)0x4001F218 // Cache Data Storage
|
|
#define FMC_DATAW3S1 *(volatile uint32_t *)0x4001F21C // Cache Data Storage
|
|
|
|
// Chapter 28: Flash Memory Module (FTFL)
|
|
#define FTFL_FSTAT *(volatile uint8_t *)0x40020000 // Flash Status Register
|
|
#define FTFL_FSTAT_CCIF (uint8_t)0x80 // Command Complete Interrupt Flag
|
|
#define FTFL_FSTAT_RDCOLERR (uint8_t)0x40 // Flash Read Collision Error Flag
|
|
#define FTFL_FSTAT_ACCERR (uint8_t)0x20 // Flash Access Error Flag
|
|
#define FTFL_FSTAT_FPVIOL (uint8_t)0x10 // Flash Protection Violation Flag
|
|
#define FTFL_FSTAT_MGSTAT0 (uint8_t)0x01 // Memory Controller Command Completion Status Flag
|
|
#define FTFL_FCNFG *(volatile uint8_t *)0x40020001 // Flash Configuration Register
|
|
#define FTFL_FCNFG_CCIE (uint8_t)0x80 // Command Complete Interrupt Enable
|
|
#define FTFL_FCNFG_RDCOLLIE (uint8_t)0x40 // Read Collision Error Interrupt Enable
|
|
#define FTFL_FCNFG_ERSAREQ (uint8_t)0x20 // Erase All Request
|
|
#define FTFL_FCNFG_ERSSUSP (uint8_t)0x10 // Erase Suspend
|
|
#define FTFL_FCNFG_PFLSH (uint8_t)0x04 // Flash memory configuration
|
|
#define FTFL_FCNFG_RAMRDY (uint8_t)0x02 // RAM Ready
|
|
#define FTFL_FCNFG_EEERDY (uint8_t)0x01 // EEPROM Ready
|
|
#define FTFL_FSEC *(const uint8_t *)0x40020002 // Flash Security Register
|
|
#define FTFL_FOPT *(const uint8_t *)0x40020003 // Flash Option Register
|
|
#define FTFL_FCCOB3 *(volatile uint8_t *)0x40020004 // Flash Common Command Object Registers
|
|
#define FTFL_FCCOB2 *(volatile uint8_t *)0x40020005
|
|
#define FTFL_FCCOB1 *(volatile uint8_t *)0x40020006
|
|
#define FTFL_FCCOB0 *(volatile uint8_t *)0x40020007
|
|
#define FTFL_FCCOB7 *(volatile uint8_t *)0x40020008
|
|
#define FTFL_FCCOB6 *(volatile uint8_t *)0x40020009
|
|
#define FTFL_FCCOB5 *(volatile uint8_t *)0x4002000A
|
|
#define FTFL_FCCOB4 *(volatile uint8_t *)0x4002000B
|
|
#define FTFL_FCCOBB *(volatile uint8_t *)0x4002000C
|
|
#define FTFL_FCCOBA *(volatile uint8_t *)0x4002000D
|
|
#define FTFL_FCCOB9 *(volatile uint8_t *)0x4002000E
|
|
#define FTFL_FCCOB8 *(volatile uint8_t *)0x4002000F
|
|
#define FTFL_FPROT3 *(volatile uint8_t *)0x40020010 // Program Flash Protection Registers
|
|
#define FTFL_FPROT2 *(volatile uint8_t *)0x40020011 // Program Flash Protection Registers
|
|
#define FTFL_FPROT1 *(volatile uint8_t *)0x40020012 // Program Flash Protection Registers
|
|
#define FTFL_FPROT0 *(volatile uint8_t *)0x40020013 // Program Flash Protection Registers
|
|
#define FTFL_FEPROT *(volatile uint8_t *)0x40020016 // EEPROM Protection Register
|
|
#define FTFL_FDPROT *(volatile uint8_t *)0x40020017 // Data Flash Protection Register
|
|
|
|
// Chapter 30: Cyclic Redundancy Check (CRC)
|
|
#define CRC_CRC *(volatile uint32_t *)0x40032000 // CRC Data register
|
|
#define CRC_GPOLY *(volatile uint32_t *)0x40032004 // CRC Polynomial register
|
|
#define CRC_CTRL *(volatile uint32_t *)0x40032008 // CRC Control register
|
|
|
|
// Chapter 31: Analog-to-Digital Converter (ADC)
|
|
#define ADC0_SC1A *(volatile uint32_t *)0x4003B000 // ADC status and control registers 1
|
|
#define ADC0_SC1B *(volatile uint32_t *)0x4003B004 // ADC status and control registers 1
|
|
#define ADC_SC1_COCO (uint32_t)0x80 // Conversion complete flag
|
|
#define ADC_SC1_AIEN (uint32_t)0x40 // Interrupt enable
|
|
#define ADC_SC1_DIFF (uint32_t)0x20 // Differential mode enable
|
|
#define ADC_SC1_ADCH(n) (uint32_t)((n) & 0x1F) // Input channel select
|
|
#define ADC0_CFG1 *(volatile uint32_t *)0x4003B008 // ADC configuration register 1
|
|
#define ADC_CFG1_ADLPC (uint32_t)0x80 // Low-power configuration
|
|
#define ADC_CFG1_ADIV(n) (uint32_t)(((n) & 3) << 5) // Clock divide select, 0=direct, 1=div2, 2=div4, 3=div8
|
|
#define ADC_CFG1_ADLSMP (uint32_t)0x10 // Sample time configuration, 0=Short, 1=Long
|
|
#define ADC_CFG1_MODE(n) (uint32_t)(((n) & 3) << 2) // Conversion mode, 0=8 bit, 1=12 bit, 2=10 bit, 3=16 bit
|
|
#define ADC_CFG1_ADICLK(n) (uint32_t)(((n) & 3) << 0) // Input clock, 0=bus, 1=bus/2, 2=OSCERCLK, 3=async
|
|
#define ADC0_CFG2 *(volatile uint32_t *)0x4003B00C // Configuration register 2
|
|
#define ADC_CFG2_MUXSEL (uint32_t)0x10 // 0=a channels, 1=b channels
|
|
#define ADC_CFG2_ADACKEN (uint32_t)0x08 // async clock enable
|
|
#define ADC_CFG2_ADHSC (uint32_t)0x04 // High speed configuration
|
|
#define ADC_CFG2_ADLSTS(n) (uint32_t)(((n) & 3) << 0) // Sample time, 0=24 cycles, 1=12 cycles, 2=6 cycles, 3=2 cycles
|
|
#define ADC0_RA *(volatile uint32_t *)0x4003B010 // ADC data result register
|
|
#define ADC0_RB *(volatile uint32_t *)0x4003B014 // ADC data result register
|
|
#define ADC0_CV1 *(volatile uint32_t *)0x4003B018 // Compare value registers
|
|
#define ADC0_CV2 *(volatile uint32_t *)0x4003B01C // Compare value registers
|
|
#define ADC0_SC2 *(volatile uint32_t *)0x4003B020 // Status and control register 2
|
|
#define ADC_SC2_ADACT (uint32_t)0x80 // Conversion active
|
|
#define ADC_SC2_ADTRG (uint32_t)0x40 // Conversion trigger select, 0=software, 1=hardware
|
|
#define ADC_SC2_ACFE (uint32_t)0x20 // Compare function enable
|
|
#define ADC_SC2_ACFGT (uint32_t)0x10 // Compare function greater than enable
|
|
#define ADC_SC2_ACREN (uint32_t)0x08 // Compare function range enable
|
|
#define ADC_SC2_DMAEN (uint32_t)0x04 // DMA enable
|
|
#define ADC_SC2_REFSEL(n) (uint32_t)(((n) & 3) << 0) // Voltage reference, 0=vcc/external, 1=1.2 volts
|
|
#define ADC0_SC3 *(volatile uint32_t *)0x4003B024 // Status and control register 3
|
|
#define ADC_SC3_CAL (uint32_t)0x80 // Calibration, 1=begin, stays set while cal in progress
|
|
#define ADC_SC3_CALF (uint32_t)0x40 // Calibration failed flag
|
|
#define ADC_SC3_ADCO (uint32_t)0x08 // Continuous conversion enable
|
|
#define ADC_SC3_AVGE (uint32_t)0x04 // Hardware average enable
|
|
#define ADC_SC3_AVGS(n) (uint32_t)(((n) & 3) << 0) // avg select, 0=4 samples, 1=8 samples, 2=16 samples, 3=32 samples
|
|
#define ADC0_OFS *(volatile uint32_t *)0x4003B028 // ADC offset correction register
|
|
#define ADC0_PG *(volatile uint32_t *)0x4003B02C // ADC plus-side gain register
|
|
#define ADC0_MG *(volatile uint32_t *)0x4003B030 // ADC minus-side gain register
|
|
#define ADC0_CLPD *(volatile uint32_t *)0x4003B034 // ADC plus-side general calibration value register
|
|
#define ADC0_CLPS *(volatile uint32_t *)0x4003B038 // ADC plus-side general calibration value register
|
|
#define ADC0_CLP4 *(volatile uint32_t *)0x4003B03C // ADC plus-side general calibration value register
|
|
#define ADC0_CLP3 *(volatile uint32_t *)0x4003B040 // ADC plus-side general calibration value register
|
|
#define ADC0_CLP2 *(volatile uint32_t *)0x4003B044 // ADC plus-side general calibration value register
|
|
#define ADC0_CLP1 *(volatile uint32_t *)0x4003B048 // ADC plus-side general calibration value register
|
|
#define ADC0_CLP0 *(volatile uint32_t *)0x4003B04C // ADC plus-side general calibration value register
|
|
#define ADC0_PGA *(volatile uint32_t *)0x4003B050 // ADC Programmable Gain Amplifier
|
|
#define ADC_PGA_PGAEN (uint32_t)0x00800000 // Enable
|
|
#define ADC_PGA_PGALPB (uint32_t)0x00100000 // Low-Power Mode Control, 0=low power, 1=normal
|
|
#define ADC_PGA_PGAG(n) (uint32_t)(((n) & 15) << 16) // Gain, 0=1X, 1=2X, 2=4X, 3=8X, 4=16X, 5=32X, 6=64X
|
|
#define ADC0_CLMD *(volatile uint32_t *)0x4003B054 // ADC minus-side general calibration value register
|
|
#define ADC0_CLMS *(volatile uint32_t *)0x4003B058 // ADC minus-side general calibration value register
|
|
#define ADC0_CLM4 *(volatile uint32_t *)0x4003B05C // ADC minus-side general calibration value register
|
|
#define ADC0_CLM3 *(volatile uint32_t *)0x4003B060 // ADC minus-side general calibration value register
|
|
#define ADC0_CLM2 *(volatile uint32_t *)0x4003B064 // ADC minus-side general calibration value register
|
|
#define ADC0_CLM1 *(volatile uint32_t *)0x4003B068 // ADC minus-side general calibration value register
|
|
#define ADC0_CLM0 *(volatile uint32_t *)0x4003B06C // ADC minus-side general calibration value register
|
|
|
|
#define ADC1_SC1A *(volatile uint32_t *)0x400BB000 // ADC status and control registers 1
|
|
#define ADC1_SC1B *(volatile uint32_t *)0x400BB004 // ADC status and control registers 1
|
|
#define ADC1_CFG1 *(volatile uint32_t *)0x400BB008 // ADC configuration register 1
|
|
#define ADC1_CFG2 *(volatile uint32_t *)0x400BB00C // Configuration register 2
|
|
#define ADC1_RA *(volatile uint32_t *)0x400BB010 // ADC data result register
|
|
#define ADC1_RB *(volatile uint32_t *)0x400BB014 // ADC data result register
|
|
#define ADC1_CV1 *(volatile uint32_t *)0x400BB018 // Compare value registers
|
|
#define ADC1_CV2 *(volatile uint32_t *)0x400BB01C // Compare value registers
|
|
#define ADC1_SC2 *(volatile uint32_t *)0x400BB020 // Status and control register 2
|
|
#define ADC1_SC3 *(volatile uint32_t *)0x400BB024 // Status and control register 3
|
|
#define ADC1_OFS *(volatile uint32_t *)0x400BB028 // ADC offset correction register
|
|
#define ADC1_PG *(volatile uint32_t *)0x400BB02C // ADC plus-side gain register
|
|
#define ADC1_MG *(volatile uint32_t *)0x400BB030 // ADC minus-side gain register
|
|
#define ADC1_CLPD *(volatile uint32_t *)0x400BB034 // ADC plus-side general calibration value register
|
|
#define ADC1_CLPS *(volatile uint32_t *)0x400BB038 // ADC plus-side general calibration value register
|
|
#define ADC1_CLP4 *(volatile uint32_t *)0x400BB03C // ADC plus-side general calibration value register
|
|
#define ADC1_CLP3 *(volatile uint32_t *)0x400BB040 // ADC plus-side general calibration value register
|
|
#define ADC1_CLP2 *(volatile uint32_t *)0x400BB044 // ADC plus-side general calibration value register
|
|
#define ADC1_CLP1 *(volatile uint32_t *)0x400BB048 // ADC plus-side general calibration value register
|
|
#define ADC1_CLP0 *(volatile uint32_t *)0x400BB04C // ADC plus-side general calibration value register
|
|
#define ADC1_PGA *(volatile uint32_t *)0x400BB050 // ADC Programmable Gain Amplifier
|
|
#define ADC1_CLMD *(volatile uint32_t *)0x400BB054 // ADC minus-side general calibration value register
|
|
#define ADC1_CLMS *(volatile uint32_t *)0x400BB058 // ADC minus-side general calibration value register
|
|
#define ADC1_CLM4 *(volatile uint32_t *)0x400BB05C // ADC minus-side general calibration value register
|
|
#define ADC1_CLM3 *(volatile uint32_t *)0x400BB060 // ADC minus-side general calibration value register
|
|
#define ADC1_CLM2 *(volatile uint32_t *)0x400BB064 // ADC minus-side general calibration value register
|
|
#define ADC1_CLM1 *(volatile uint32_t *)0x400BB068 // ADC minus-side general calibration value register
|
|
#define ADC1_CLM0 *(volatile uint32_t *)0x400BB06C // ADC minus-side general calibration value register
|
|
|
|
#define DAC0_DAT0L *(volatile uint8_t *)0x400CC000 // DAC Data Low Register
|
|
#define DAC0_DATH *(volatile uint8_t *)0x400CC001 // DAC Data High Register
|
|
#define DAC0_DAT1L *(volatile uint8_t *)0x400CC002 // DAC Data Low Register
|
|
#define DAC0_DAT2L *(volatile uint8_t *)0x400CC004 // DAC Data Low Register
|
|
#define DAC0_DAT3L *(volatile uint8_t *)0x400CC006 // DAC Data Low Register
|
|
#define DAC0_DAT4L *(volatile uint8_t *)0x400CC008 // DAC Data Low Register
|
|
#define DAC0_DAT5L *(volatile uint8_t *)0x400CC00A // DAC Data Low Register
|
|
#define DAC0_DAT6L *(volatile uint8_t *)0x400CC00C // DAC Data Low Register
|
|
#define DAC0_DAT7L *(volatile uint8_t *)0x400CC00E // DAC Data Low Register
|
|
#define DAC0_DAT8L *(volatile uint8_t *)0x400CC010 // DAC Data Low Register
|
|
#define DAC0_DAT9L *(volatile uint8_t *)0x400CC012 // DAC Data Low Register
|
|
#define DAC0_DAT10L *(volatile uint8_t *)0x400CC014 // DAC Data Low Register
|
|
#define DAC0_DAT11L *(volatile uint8_t *)0x400CC016 // DAC Data Low Register
|
|
#define DAC0_DAT12L *(volatile uint8_t *)0x400CC018 // DAC Data Low Register
|
|
#define DAC0_DAT13L *(volatile uint8_t *)0x400CC01A // DAC Data Low Register
|
|
#define DAC0_DAT14L *(volatile uint8_t *)0x400CC01C // DAC Data Low Register
|
|
#define DAC0_DAT15L *(volatile uint8_t *)0x400CC01E // DAC Data Low Register
|
|
#define DAC0_SR *(volatile uint8_t *)0x400CC020 // DAC Status Register
|
|
#define DAC0_C0 *(volatile uint8_t *)0x400CC021 // DAC Control Register
|
|
#define DAC_C0_DACEN 0x80 // DAC Enable
|
|
#define DAC_C0_DACRFS 0x40 // DAC Reference Select
|
|
#define DAC_C0_DACTRGSEL 0x20 // DAC Trigger Select
|
|
#define DAC_C0_DACSWTRG 0x10 // DAC Software Trigger
|
|
#define DAC_C0_LPEN 0x08 // DAC Low Power Control
|
|
#define DAC_C0_DACBWIEN 0x04 // DAC Buffer Watermark Interrupt Enable
|
|
#define DAC_C0_DACBTIEN 0x02 // DAC Buffer Read Pointer Top Flag Interrupt Enable
|
|
#define DAC_C0_DACBBIEN 0x01 // DAC Buffer Read Pointer Bottom Flag Interrupt Enable
|
|
#define DAC0_C1 *(volatile uint8_t *)0x400CC022 // DAC Control Register 1
|
|
#define DAC_C1_DMAEN 0x80 // DMA Enable Select
|
|
#define DAC_C1_DACBFWM(n) (((n) & 3) << 3) // DAC Buffer Watermark Select
|
|
#define DAC_C1_DACBFMD(n) (((n) & 3) << 0) // DAC Buffer Work Mode Select
|
|
#define DAC_C1_DACBFEN 0x00 // DAC Buffer Enable
|
|
|
|
#define DAC0_C2 *(volatile uint8_t *)0x400CC023 // DAC Control Register 2
|
|
#define DAC_C2_DACBFRP(n) (((n) & 15) << 4) // DAC Buffer Read Pointer
|
|
#define DAC_C2_DACBFUP(n) (((n) & 15) << 0) // DAC Buffer Upper Limit
|
|
|
|
|
|
//#define MCG_C2_RANGE0(n) (uint8_t)(((n) & 0x03) << 4) // Frequency Range Select, Selects the frequency range for the crystal oscillator
|
|
//#define MCG_C2_LOCRE0 (uint8_t)0x80 // Loss of Clock Reset Enable, Determines whether an interrupt or a reset request is made following a loss of OSC0
|
|
|
|
// Chapter 32: Comparator (CMP)
|
|
#define CMP0_CR0 *(volatile uint8_t *)0x40073000 // CMP Control Register 0
|
|
#define CMP0_CR1 *(volatile uint8_t *)0x40073001 // CMP Control Register 1
|
|
#define CMP0_FPR *(volatile uint8_t *)0x40073002 // CMP Filter Period Register
|
|
#define CMP0_SCR *(volatile uint8_t *)0x40073003 // CMP Status and Control Register
|
|
#define CMP0_DACCR *(volatile uint8_t *)0x40073004 // DAC Control Register
|
|
#define CMP0_MUXCR *(volatile uint8_t *)0x40073005 // MUX Control Register
|
|
#define CMP1_CR0 *(volatile uint8_t *)0x40073008 // CMP Control Register 0
|
|
#define CMP1_CR1 *(volatile uint8_t *)0x40073009 // CMP Control Register 1
|
|
#define CMP1_FPR *(volatile uint8_t *)0x4007300A // CMP Filter Period Register
|
|
#define CMP1_SCR *(volatile uint8_t *)0x4007300B // CMP Status and Control Register
|
|
#define CMP1_DACCR *(volatile uint8_t *)0x4007300C // DAC Control Register
|
|
#define CMP1_MUXCR *(volatile uint8_t *)0x4007300D // MUX Control Register
|
|
|
|
// Chapter 33: Voltage Reference (VREFV1)
|
|
#define VREF_TRM *(volatile uint8_t *)0x40074000 // VREF Trim Register
|
|
#define VREF_TRM_CHOPEN (uint8_t)0x40 // Chop oscillator enable
|
|
#define VREF_TRM_TRIM(n) ((n) & 0x3F) // Trim bits
|
|
#define VREF_SC *(volatile uint8_t *)0x40074001 // VREF Status and Control Register
|
|
#define VREF_SC_VREFEN (uint8_t)0x80 // Internal Voltage Reference enable
|
|
#define VREF_SC_REGEN (uint8_t)0x40 // Regulator enable
|
|
#define VREF_SC_ICOMPEN (uint8_t)0x20 // Second order curvature compensation enable
|
|
#define VREF_SC_VREFST (uint8_t)0x04 // Internal Voltage Reference stable flag
|
|
#define VREF_SC_MODE_LV(n) (uint8_t)(((n) & 3) << 0) // Buffer Mode selection: 0=Bandgap on only
|
|
// 1=High power buffer mode,
|
|
// 2=Low-power buffer mode
|
|
|
|
// Chapter 34: Programmable Delay Block (PDB)
|
|
#define PDB0_SC *(volatile uint32_t *)0x40036000 // Status and Control Register
|
|
#define PDB_SC_LDMOD(n) (((n) & 3) << 18) // Load Mode Select
|
|
#define PDB_SC_PDBEIE 0x00020000 // Sequence Error Interrupt Enable
|
|
#define PDB_SC_SWTRIG 0x00010000 // Software Trigger
|
|
#define PDB_SC_DMAEN 0x00008000 // DMA Enable
|
|
#define PDB_SC_PRESCALER(n) (((n) & 7) << 12) // Prescaler Divider Select
|
|
#define PDB_SC_TRGSEL(n) (((n) & 15) << 8) // Trigger Input Source Select
|
|
#define PDB_SC_PDBEN 0x00000080 // PDB Enable
|
|
#define PDB_SC_PDBIF 0x00000040 // PDB Interrupt Flag
|
|
#define PDB_SC_PDBIE 0x00000020 // PDB Interrupt Enable.
|
|
#define PDB_SC_MULT(n) (((n) & 3) << 2) // Multiplication Factor
|
|
#define PDB_SC_CONT 0x00000002 // Continuous Mode Enable
|
|
#define PDB_SC_LDOK 0x00000001 // Load OK
|
|
#define PDB0_MOD *(volatile uint32_t *)0x40036004 // Modulus Register
|
|
#define PDB0_CNT *(volatile uint32_t *)0x40036008 // Counter Register
|
|
#define PDB0_IDLY *(volatile uint32_t *)0x4003600C // Interrupt Delay Register
|
|
#define PDB0_CH0C1 *(volatile uint32_t *)0x40036010 // Channel n Control Register 1
|
|
#define PDB0_CH0S *(volatile uint32_t *)0x40036014 // Channel n Status Register
|
|
#define PDB0_CH0DLY0 *(volatile uint32_t *)0x40036018 // Channel n Delay 0 Register
|
|
#define PDB0_CH0DLY1 *(volatile uint32_t *)0x4003601C // Channel n Delay 1 Register
|
|
#define PDB0_POEN *(volatile uint32_t *)0x40036190 // Pulse-Out n Enable Register
|
|
#define PDB0_PO0DLY *(volatile uint32_t *)0x40036194 // Pulse-Out n Delay Register
|
|
#define PDB0_PO1DLY *(volatile uint32_t *)0x40036198 // Pulse-Out n Delay Register
|
|
|
|
// Chapter 35: FlexTimer Module (FTM)
|
|
#define FTM0_SC *(volatile uint32_t *)0x40038000 // Status And Control
|
|
#define FTM_SC_TOF 0x80 // Timer Overflow Flag
|
|
#define FTM_SC_TOIE 0x40 // Timer Overflow Interrupt Enable
|
|
#define FTM_SC_CPWMS 0x20 // Center-Aligned PWM Select
|
|
#define FTM_SC_CLKS(n) (((n) & 3) << 3) // Clock Source Selection
|
|
#define FTM_SC_PS(n) (((n) & 7) << 0) // Prescale Factor Selection
|
|
#define FTM0_CNT *(volatile uint32_t *)0x40038004 // Counter
|
|
#define FTM0_MOD *(volatile uint32_t *)0x40038008 // Modulo
|
|
#define FTM0_C0SC *(volatile uint32_t *)0x4003800C // Channel 0 Status And Control
|
|
#define FTM0_C0V *(volatile uint32_t *)0x40038010 // Channel 0 Value
|
|
#define FTM0_C1SC *(volatile uint32_t *)0x40038014 // Channel 1 Status And Control
|
|
#define FTM0_C1V *(volatile uint32_t *)0x40038018 // Channel 1 Value
|
|
#define FTM0_C2SC *(volatile uint32_t *)0x4003801C // Channel 2 Status And Control
|
|
#define FTM0_C2V *(volatile uint32_t *)0x40038020 // Channel 2 Value
|
|
#define FTM0_C3SC *(volatile uint32_t *)0x40038024 // Channel 3 Status And Control
|
|
#define FTM0_C3V *(volatile uint32_t *)0x40038028 // Channel 3 Value
|
|
#define FTM0_C4SC *(volatile uint32_t *)0x4003802C // Channel 4 Status And Control
|
|
#define FTM0_C4V *(volatile uint32_t *)0x40038030 // Channel 4 Value
|
|
#define FTM0_C5SC *(volatile uint32_t *)0x40038034 // Channel 5 Status And Control
|
|
#define FTM0_C5V *(volatile uint32_t *)0x40038038 // Channel 5 Value
|
|
#define FTM0_C6SC *(volatile uint32_t *)0x4003803C // Channel 6 Status And Control
|
|
#define FTM0_C6V *(volatile uint32_t *)0x40038040 // Channel 6 Value
|
|
#define FTM0_C7SC *(volatile uint32_t *)0x40038044 // Channel 7 Status And Control
|
|
#define FTM0_C7V *(volatile uint32_t *)0x40038048 // Channel 7 Value
|
|
#define FTM0_CNTIN *(volatile uint32_t *)0x4003804C // Counter Initial Value
|
|
#define FTM0_STATUS *(volatile uint32_t *)0x40038050 // Capture And Compare Status
|
|
#define FTM0_MODE *(volatile uint32_t *)0x40038054 // Features Mode Selection
|
|
#define FTM_MODE_FAULTIE 0x80 // Fault Interrupt Enable
|
|
#define FTM_MODE_FAULTM(n) (((n) & 3) << 5) // Fault Control Mode
|
|
#define FTM_MODE_CAPTEST 0x10 // Capture Test Mode Enable
|
|
#define FTM_MODE_PWMSYNC 0x08 // PWM Synchronization Mode
|
|
#define FTM_MODE_WPDIS 0x04 // Write Protection Disable
|
|
#define FTM_MODE_INIT 0x02 // Initialize The Channels Output
|
|
#define FTM_MODE_FTMEN 0x01 // FTM Enable
|
|
#define FTM0_SYNC *(volatile uint32_t *)0x40038058 // Synchronization
|
|
#define FTM_SYNC_SWSYNC 0x80 //
|
|
#define FTM_SYNC_TRIG2 0x40 //
|
|
#define FTM_SYNC_TRIG1 0x20 //
|
|
#define FTM_SYNC_TRIG0 0x10 //
|
|
#define FTM_SYNC_SYNCHOM 0x08 //
|
|
#define FTM_SYNC_REINIT 0x04 //
|
|
#define FTM_SYNC_CNTMAX 0x02 //
|
|
#define FTM_SYNC_CNTMIN 0x01 //
|
|
#define FTM0_OUTINIT *(volatile uint32_t *)0x4003805C // Initial State For Channels Output
|
|
#define FTM0_OUTMASK *(volatile uint32_t *)0x40038060 // Output Mask
|
|
#define FTM0_COMBINE *(volatile uint32_t *)0x40038064 // Function For Linked Channels
|
|
#define FTM0_DEADTIME *(volatile uint32_t *)0x40038068 // Deadtime Insertion Control
|
|
#define FTM0_EXTTRIG *(volatile uint32_t *)0x4003806C // FTM External Trigger
|
|
#define FTM0_POL *(volatile uint32_t *)0x40038070 // Channels Polarity
|
|
#define FTM0_FMS *(volatile uint32_t *)0x40038074 // Fault Mode Status
|
|
#define FTM0_FILTER *(volatile uint32_t *)0x40038078 // Input Capture Filter Control
|
|
#define FTM0_FLTCTRL *(volatile uint32_t *)0x4003807C // Fault Control
|
|
#define FTM0_QDCTRL *(volatile uint32_t *)0x40038080 // Quadrature Decoder Control And Status
|
|
#define FTM0_CONF *(volatile uint32_t *)0x40038084 // Configuration
|
|
#define FTM0_FLTPOL *(volatile uint32_t *)0x40038088 // FTM Fault Input Polarity
|
|
#define FTM0_SYNCONF *(volatile uint32_t *)0x4003808C // Synchronization Configuration
|
|
#define FTM0_INVCTRL *(volatile uint32_t *)0x40038090 // FTM Inverting Control
|
|
#define FTM0_SWOCTRL *(volatile uint32_t *)0x40038094 // FTM Software Output Control
|
|
#define FTM0_PWMLOAD *(volatile uint32_t *)0x40038098 // FTM PWM Load
|
|
#define FTM1_SC *(volatile uint32_t *)0x40039000 // Status And Control
|
|
#define FTM1_CNT *(volatile uint32_t *)0x40039004 // Counter
|
|
#define FTM1_MOD *(volatile uint32_t *)0x40039008 // Modulo
|
|
#define FTM1_C0SC *(volatile uint32_t *)0x4003900C // Channel 0 Status And Control
|
|
#define FTM1_C0V *(volatile uint32_t *)0x40039010 // Channel 0 Value
|
|
#define FTM1_C1SC *(volatile uint32_t *)0x40039014 // Channel 1 Status And Control
|
|
#define FTM1_C1V *(volatile uint32_t *)0x40039018 // Channel 1 Value
|
|
#define FTM1_CNTIN *(volatile uint32_t *)0x4003904C // Counter Initial Value
|
|
#define FTM1_STATUS *(volatile uint32_t *)0x40039050 // Capture And Compare Status
|
|
#define FTM1_MODE *(volatile uint32_t *)0x40039054 // Features Mode Selection
|
|
#define FTM1_SYNC *(volatile uint32_t *)0x40039058 // Synchronization
|
|
#define FTM1_OUTINIT *(volatile uint32_t *)0x4003905C // Initial State For Channels Output
|
|
#define FTM1_OUTMASK *(volatile uint32_t *)0x40039060 // Output Mask
|
|
#define FTM1_COMBINE *(volatile uint32_t *)0x40039064 // Function For Linked Channels
|
|
#define FTM1_DEADTIME *(volatile uint32_t *)0x40039068 // Deadtime Insertion Control
|
|
#define FTM1_EXTTRIG *(volatile uint32_t *)0x4003906C // FTM External Trigger
|
|
#define FTM1_POL *(volatile uint32_t *)0x40039070 // Channels Polarity
|
|
#define FTM1_FMS *(volatile uint32_t *)0x40039074 // Fault Mode Status
|
|
#define FTM1_FILTER *(volatile uint32_t *)0x40039078 // Input Capture Filter Control
|
|
#define FTM1_FLTCTRL *(volatile uint32_t *)0x4003907C // Fault Control
|
|
#define FTM1_QDCTRL *(volatile uint32_t *)0x40039080 // Quadrature Decoder Control And Status
|
|
#define FTM1_CONF *(volatile uint32_t *)0x40039084 // Configuration
|
|
#define FTM1_FLTPOL *(volatile uint32_t *)0x40039088 // FTM Fault Input Polarity
|
|
#define FTM1_SYNCONF *(volatile uint32_t *)0x4003908C // Synchronization Configuration
|
|
#define FTM1_INVCTRL *(volatile uint32_t *)0x40039090 // FTM Inverting Control
|
|
#define FTM1_SWOCTRL *(volatile uint32_t *)0x40039094 // FTM Software Output Control
|
|
#define FTM1_PWMLOAD *(volatile uint32_t *)0x40039098 // FTM PWM Load
|
|
#define FTM2_SC *(volatile uint32_t *)0x400B8000 // Status And Control
|
|
#define FTM2_CNT *(volatile uint32_t *)0x400B8004 // Counter
|
|
#define FTM2_MOD *(volatile uint32_t *)0x400B8008 // Modulo
|
|
#define FTM2_C0SC *(volatile uint32_t *)0x400B800C // Channel 0 Status And Control
|
|
#define FTM2_C0V *(volatile uint32_t *)0x400B8010 // Channel 0 Value
|
|
#define FTM2_C1SC *(volatile uint32_t *)0x400B8014 // Channel 1 Status And Control
|
|
#define FTM2_C1V *(volatile uint32_t *)0x400B8018 // Channel 1 Value
|
|
#define FTM2_CNTIN *(volatile uint32_t *)0x400B804C // Counter Initial Value
|
|
#define FTM2_STATUS *(volatile uint32_t *)0x400B8050 // Capture And Compare Status
|
|
#define FTM2_MODE *(volatile uint32_t *)0x400B8054 // Features Mode Selection
|
|
#define FTM2_SYNC *(volatile uint32_t *)0x400B8058 // Synchronization
|
|
#define FTM2_OUTINIT *(volatile uint32_t *)0x400B805C // Initial State For Channels Output
|
|
#define FTM2_OUTMASK *(volatile uint32_t *)0x400B8060 // Output Mask
|
|
#define FTM2_COMBINE *(volatile uint32_t *)0x400B8064 // Function For Linked Channels
|
|
#define FTM2_DEADTIME *(volatile uint32_t *)0x400B8068 // Deadtime Insertion Control
|
|
#define FTM2_EXTTRIG *(volatile uint32_t *)0x400B806C // FTM External Trigger
|
|
#define FTM2_POL *(volatile uint32_t *)0x400B8070 // Channels Polarity
|
|
#define FTM2_FMS *(volatile uint32_t *)0x400B8074 // Fault Mode Status
|
|
#define FTM2_FILTER *(volatile uint32_t *)0x400B8078 // Input Capture Filter Control
|
|
#define FTM2_FLTCTRL *(volatile uint32_t *)0x400B807C // Fault Control
|
|
#define FTM2_QDCTRL *(volatile uint32_t *)0x400B8080 // Quadrature Decoder Control And Status
|
|
#define FTM2_CONF *(volatile uint32_t *)0x400B8084 // Configuration
|
|
#define FTM2_FLTPOL *(volatile uint32_t *)0x400B8088 // FTM Fault Input Polarity
|
|
#define FTM2_SYNCONF *(volatile uint32_t *)0x400B808C // Synchronization Configuration
|
|
#define FTM2_INVCTRL *(volatile uint32_t *)0x400B8090 // FTM Inverting Control
|
|
#define FTM2_SWOCTRL *(volatile uint32_t *)0x400B8094 // FTM Software Output Control
|
|
#define FTM2_PWMLOAD *(volatile uint32_t *)0x400B8098 // FTM PWM Load
|
|
|
|
// Chapter 36: Periodic Interrupt Timer (PIT)
|
|
#define PIT_MCR *(volatile uint32_t *)0x40037000 // PIT Module Control Register
|
|
#define PIT_LDVAL0 *(volatile uint32_t *)0x40037100 // Timer Load Value Register
|
|
#define PIT_CVAL0 *(volatile uint32_t *)0x40037104 // Current Timer Value Register
|
|
#define PIT_TCTRL0 *(volatile uint32_t *)0x40037108 // Timer Control Register
|
|
#define PIT_TFLG0 *(volatile uint32_t *)0x4003710C // Timer Flag Register
|
|
#define PIT_LDVAL1 *(volatile uint32_t *)0x40037110 // Timer Load Value Register
|
|
#define PIT_CVAL1 *(volatile uint32_t *)0x40037114 // Current Timer Value Register
|
|
#define PIT_TCTRL1 *(volatile uint32_t *)0x40037118 // Timer Control Register
|
|
#define PIT_TFLG1 *(volatile uint32_t *)0x4003711C // Timer Flag Register
|
|
#define PIT_LDVAL2 *(volatile uint32_t *)0x40037120 // Timer Load Value Register
|
|
#define PIT_CVAL2 *(volatile uint32_t *)0x40037124 // Current Timer Value Register
|
|
#define PIT_TCTRL2 *(volatile uint32_t *)0x40037128 // Timer Control Register
|
|
#define PIT_TFLG2 *(volatile uint32_t *)0x4003712C // Timer Flag Register
|
|
#define PIT_LDVAL3 *(volatile uint32_t *)0x40037130 // Timer Load Value Register
|
|
#define PIT_CVAL3 *(volatile uint32_t *)0x40037134 // Current Timer Value Register
|
|
#define PIT_TCTRL3 *(volatile uint32_t *)0x40037138 // Timer Control Register
|
|
#define PIT_TFLG3 *(volatile uint32_t *)0x4003713C // Timer Flag Register
|
|
|
|
// Chapter 37: Low-Power Timer (LPTMR)
|
|
#define LPTMR0_CSR *(volatile uint32_t *)0x40040000 // Low Power Timer Control Status Register
|
|
#define LPTMR0_PSR *(volatile uint32_t *)0x40040004 // Low Power Timer Prescale Register
|
|
#define LPTMR0_CMR *(volatile uint32_t *)0x40040008 // Low Power Timer Compare Register
|
|
#define LPTMR0_CNR *(volatile uint32_t *)0x4004000C // Low Power Timer Counter Register
|
|
|
|
// Chapter 38: Carrier Modulator Transmitter (CMT)
|
|
#define CMT_CGH1 *(volatile uint8_t *)0x40062000 // CMT Carrier Generator High Data Register 1
|
|
#define CMT_CGL1 *(volatile uint8_t *)0x40062001 // CMT Carrier Generator Low Data Register 1
|
|
#define CMT_CGH2 *(volatile uint8_t *)0x40062002 // CMT Carrier Generator High Data Register 2
|
|
#define CMT_CGL2 *(volatile uint8_t *)0x40062003 // CMT Carrier Generator Low Data Register 2
|
|
#define CMT_OC *(volatile uint8_t *)0x40062004 // CMT Output Control Register
|
|
#define CMT_MSC *(volatile uint8_t *)0x40062005 // CMT Modulator Status and Control Register
|
|
#define CMT_CMD1 *(volatile uint8_t *)0x40062006 // CMT Modulator Data Register Mark High
|
|
#define CMT_CMD2 *(volatile uint8_t *)0x40062007 // CMT Modulator Data Register Mark Low
|
|
#define CMT_CMD3 *(volatile uint8_t *)0x40062008 // CMT Modulator Data Register Space High
|
|
#define CMT_CMD4 *(volatile uint8_t *)0x40062009 // CMT Modulator Data Register Space Low
|
|
#define CMT_PPS *(volatile uint8_t *)0x4006200A // CMT Primary Prescaler Register
|
|
#define CMT_DMA *(volatile uint8_t *)0x4006200B // CMT Direct Memory Access Register
|
|
|
|
// Chapter 39: Real Time Clock (RTC)
|
|
#define RTC_TSR *(volatile uint32_t *)0x4003D000 // RTC Time Seconds Register
|
|
#define RTC_TPR *(volatile uint32_t *)0x4003D004 // RTC Time Prescaler Register
|
|
#define RTC_TAR *(volatile uint32_t *)0x4003D008 // RTC Time Alarm Register
|
|
#define RTC_TCR *(volatile uint32_t *)0x4003D00C // RTC Time Compensation Register
|
|
#define RTC_TCR_CIC(n) (((n) & 255) << 24) // Compensation Interval Counter
|
|
#define RTC_TCR_TCV(n) (((n) & 255) << 16) // Time Compensation Value
|
|
#define RTC_TCR_CIR(n) (((n) & 255) << 8) // Compensation Interval Register
|
|
#define RTC_TCR_TCR(n) (((n) & 255) << 0) // Time Compensation Register
|
|
#define RTC_CR *(volatile uint32_t *)0x4003D010 // RTC Control Register
|
|
#define RTC_CR_SC2P (uint32_t)0x00002000 //
|
|
#define RTC_CR_SC4P (uint32_t)0x00001000 //
|
|
#define RTC_CR_SC8P (uint32_t)0x00000800 //
|
|
#define RTC_CR_SC16P (uint32_t)0x00000400 //
|
|
#define RTC_CR_CLKO (uint32_t)0x00000200 //
|
|
#define RTC_CR_OSCE (uint32_t)0x00000100 //
|
|
#define RTC_CR_UM (uint32_t)0x00000008 //
|
|
#define RTC_CR_SUP (uint32_t)0x00000004 //
|
|
#define RTC_CR_WPE (uint32_t)0x00000002 //
|
|
#define RTC_CR_SWR (uint32_t)0x00000001 //
|
|
#define RTC_SR *(volatile uint32_t *)0x4003D014 // RTC Status Register
|
|
#define RTC_SR_TCE (uint32_t)0x00000010 //
|
|
#define RTC_SR_TAF (uint32_t)0x00000004 //
|
|
#define RTC_SR_TOF (uint32_t)0x00000002 //
|
|
#define RTC_SR_TIF (uint32_t)0x00000001 //
|
|
#define RTC_LR *(volatile uint32_t *)0x4003D018 // RTC Lock Register
|
|
#define RTC_IER *(volatile uint32_t *)0x4003D01C // RTC Interrupt Enable Register
|
|
#define RTC_WAR *(volatile uint32_t *)0x4003D800 // RTC Write Access Register
|
|
#define RTC_RAR *(volatile uint32_t *)0x4003D804 // RTC Read Access Register
|
|
|
|
// Chapter 40: Universal Serial Bus OTG Controller (USBOTG)
|
|
#define USB0_PERID *(const uint8_t *)0x40072000 // Peripheral ID register
|
|
#define USB0_IDCOMP *(const uint8_t *)0x40072004 // Peripheral ID Complement register
|
|
#define USB0_REV *(const uint8_t *)0x40072008 // Peripheral Revision register
|
|
#define USB0_ADDINFO *(volatile uint8_t *)0x4007200C // Peripheral Additional Info register
|
|
#define USB0_OTGISTAT *(volatile uint8_t *)0x40072010 // OTG Interrupt Status register
|
|
#define USB_OTGISTAT_IDCHG (uint8_t)0x80 //
|
|
#define USB_OTGISTAT_ONEMSEC (uint8_t)0x40 //
|
|
#define USB_OTGISTAT_LINE_STATE_CHG (uint8_t)0x20 //
|
|
#define USB_OTGISTAT_SESSVLDCHG (uint8_t)0x08 //
|
|
#define USB_OTGISTAT_B_SESS_CHG (uint8_t)0x04 //
|
|
#define USB_OTGISTAT_AVBUSCHG (uint8_t)0x01 //
|
|
#define USB0_OTGICR *(volatile uint8_t *)0x40072014 // OTG Interrupt Control Register
|
|
#define USB_OTGICR_IDEN (uint8_t)0x80 //
|
|
#define USB_OTGICR_ONEMSECEN (uint8_t)0x40 //
|
|
#define USB_OTGICR_LINESTATEEN (uint8_t)0x20 //
|
|
#define USB_OTGICR_SESSVLDEN (uint8_t)0x08 //
|
|
#define USB_OTGICR_BSESSEN (uint8_t)0x04 //
|
|
#define USB_OTGICR_AVBUSEN (uint8_t)0x01 //
|
|
#define USB0_OTGSTAT *(volatile uint8_t *)0x40072018 // OTG Status register
|
|
#define USB_OTGSTAT_ID (uint8_t)0x80 //
|
|
#define USB_OTGSTAT_ONEMSECEN (uint8_t)0x40 //
|
|
#define USB_OTGSTAT_LINESTATESTABLE (uint8_t)0x20 //
|
|
#define USB_OTGSTAT_SESS_VLD (uint8_t)0x08 //
|
|
#define USB_OTGSTAT_BSESSEND (uint8_t)0x04 //
|
|
#define USB_OTGSTAT_AVBUSVLD (uint8_t)0x01 //
|
|
#define USB0_OTGCTL *(volatile uint8_t *)0x4007201C // OTG Control Register
|
|
#define USB_OTGCTL_DPHIGH (uint8_t)0x80 //
|
|
#define USB_OTGCTL_DPLOW (uint8_t)0x20 //
|
|
#define USB_OTGCTL_DMLOW (uint8_t)0x10 //
|
|
#define USB_OTGCTL_OTGEN (uint8_t)0x04 //
|
|
#define USB0_ISTAT *(volatile uint8_t *)0x40072080 // Interrupt Status Register
|
|
#define USB_ISTAT_STALL (uint8_t)0x80 //
|
|
#define USB_ISTAT_ATTACH (uint8_t)0x40 //
|
|
#define USB_ISTAT_RESUME (uint8_t)0x20 //
|
|
#define USB_ISTAT_SLEEP (uint8_t)0x10 //
|
|
#define USB_ISTAT_TOKDNE (uint8_t)0x08 //
|
|
#define USB_ISTAT_SOFTOK (uint8_t)0x04 //
|
|
#define USB_ISTAT_ERROR (uint8_t)0x02 //
|
|
#define USB_ISTAT_USBRST (uint8_t)0x01 //
|
|
#define USB0_INTEN *(volatile uint8_t *)0x40072084 // Interrupt Enable Register
|
|
#define USB_INTEN_STALLEN (uint8_t)0x80 //
|
|
#define USB_INTEN_ATTACHEN (uint8_t)0x40 //
|
|
#define USB_INTEN_RESUMEEN (uint8_t)0x20 //
|
|
#define USB_INTEN_SLEEPEN (uint8_t)0x10 //
|
|
#define USB_INTEN_TOKDNEEN (uint8_t)0x08 //
|
|
#define USB_INTEN_SOFTOKEN (uint8_t)0x04 //
|
|
#define USB_INTEN_ERROREN (uint8_t)0x02 //
|
|
#define USB_INTEN_USBRSTEN (uint8_t)0x01 //
|
|
#define USB0_ERRSTAT *(volatile uint8_t *)0x40072088 // Error Interrupt Status Register
|
|
#define USB_ERRSTAT_BTSERR (uint8_t)0x80 //
|
|
#define USB_ERRSTAT_DMAERR (uint8_t)0x20 //
|
|
#define USB_ERRSTAT_BTOERR (uint8_t)0x10 //
|
|
#define USB_ERRSTAT_DFN8 (uint8_t)0x08 //
|
|
#define USB_ERRSTAT_CRC16 (uint8_t)0x04 //
|
|
#define USB_ERRSTAT_CRC5EOF (uint8_t)0x02 //
|
|
#define USB_ERRSTAT_PIDERR (uint8_t)0x01 //
|
|
#define USB0_ERREN *(volatile uint8_t *)0x4007208C // Error Interrupt Enable Register
|
|
#define USB_ERREN_BTSERREN (uint8_t)0x80 //
|
|
#define USB_ERREN_DMAERREN (uint8_t)0x20 //
|
|
#define USB_ERREN_BTOERREN (uint8_t)0x10 //
|
|
#define USB_ERREN_DFN8EN (uint8_t)0x08 //
|
|
#define USB_ERREN_CRC16EN (uint8_t)0x04 //
|
|
#define USB_ERREN_CRC5EOFEN (uint8_t)0x02 //
|
|
#define USB_ERREN_PIDERREN (uint8_t)0x01 //
|
|
#define USB0_STAT *(volatile uint8_t *)0x40072090 // Status Register
|
|
#define USB_STAT_TX (uint8_t)0x08 //
|
|
#define USB_STAT_ODD (uint8_t)0x04 //
|
|
#define USB_STAT_ENDP(n) (uint8_t)((n) >> 4) //
|
|
#define USB0_CTL *(volatile uint8_t *)0x40072094 // Control Register
|
|
#define USB_CTL_JSTATE (uint8_t)0x80 //
|
|
#define USB_CTL_SE0 (uint8_t)0x40 //
|
|
#define USB_CTL_TXSUSPENDTOKENBUSY (uint8_t)0x20 //
|
|
#define USB_CTL_RESET (uint8_t)0x10 //
|
|
#define USB_CTL_HOSTMODEEN (uint8_t)0x08 //
|
|
#define USB_CTL_RESUME (uint8_t)0x04 //
|
|
#define USB_CTL_ODDRST (uint8_t)0x02 //
|
|
#define USB_CTL_USBENSOFEN (uint8_t)0x01 //
|
|
#define USB0_ADDR *(volatile uint8_t *)0x40072098 // Address Register
|
|
#define USB0_BDTPAGE1 *(volatile uint8_t *)0x4007209C // BDT Page Register 1
|
|
#define USB0_FRMNUML *(volatile uint8_t *)0x400720A0 // Frame Number Register Low
|
|
#define USB0_FRMNUMH *(volatile uint8_t *)0x400720A4 // Frame Number Register High
|
|
#define USB0_TOKEN *(volatile uint8_t *)0x400720A8 // Token Register
|
|
#define USB0_SOFTHLD *(volatile uint8_t *)0x400720AC // SOF Threshold Register
|
|
#define USB0_BDTPAGE2 *(volatile uint8_t *)0x400720B0 // BDT Page Register 2
|
|
#define USB0_BDTPAGE3 *(volatile uint8_t *)0x400720B4 // BDT Page Register 3
|
|
#define USB0_ENDPT0 *(volatile uint8_t *)0x400720C0 // Endpoint Control Register
|
|
#define USB_ENDPT_HOSTWOHUB (uint8_t)0x80 // host only, enable low speed
|
|
#define USB_ENDPT_RETRYDIS (uint8_t)0x40 // host only, set to disable NAK retry
|
|
#define USB_ENDPT_EPCTLDIS (uint8_t)0x10 // 0=control, 1=bulk, interrupt, isync
|
|
#define USB_ENDPT_EPRXEN (uint8_t)0x08 // enables the endpoint for RX transfers.
|
|
#define USB_ENDPT_EPTXEN (uint8_t)0x04 // enables the endpoint for TX transfers.
|
|
#define USB_ENDPT_EPSTALL (uint8_t)0x02 // set to stall endpoint
|
|
#define USB_ENDPT_EPHSHK (uint8_t)0x01 // enable handshaking during a transaction, generally set unless Isochronous
|
|
#define USB0_ENDPT1 *(volatile uint8_t *)0x400720C4 // Endpoint Control Register
|
|
#define USB0_ENDPT2 *(volatile uint8_t *)0x400720C8 // Endpoint Control Register
|
|
#define USB0_ENDPT3 *(volatile uint8_t *)0x400720CC // Endpoint Control Register
|
|
#define USB0_ENDPT4 *(volatile uint8_t *)0x400720D0 // Endpoint Control Register
|
|
#define USB0_ENDPT5 *(volatile uint8_t *)0x400720D4 // Endpoint Control Register
|
|
#define USB0_ENDPT6 *(volatile uint8_t *)0x400720D8 // Endpoint Control Register
|
|
#define USB0_ENDPT7 *(volatile uint8_t *)0x400720DC // Endpoint Control Register
|
|
#define USB0_ENDPT8 *(volatile uint8_t *)0x400720E0 // Endpoint Control Register
|
|
#define USB0_ENDPT9 *(volatile uint8_t *)0x400720E4 // Endpoint Control Register
|
|
#define USB0_ENDPT10 *(volatile uint8_t *)0x400720E8 // Endpoint Control Register
|
|
#define USB0_ENDPT11 *(volatile uint8_t *)0x400720EC // Endpoint Control Register
|
|
#define USB0_ENDPT12 *(volatile uint8_t *)0x400720F0 // Endpoint Control Register
|
|
#define USB0_ENDPT13 *(volatile uint8_t *)0x400720F4 // Endpoint Control Register
|
|
#define USB0_ENDPT14 *(volatile uint8_t *)0x400720F8 // Endpoint Control Register
|
|
#define USB0_ENDPT15 *(volatile uint8_t *)0x400720FC // Endpoint Control Register
|
|
#define USB0_USBCTRL *(volatile uint8_t *)0x40072100 // USB Control Register
|
|
#define USB_USBCTRL_SUSP (uint8_t)0x80 // Places the USB transceiver into the suspend state.
|
|
#define USB_USBCTRL_PDE (uint8_t)0x40 // Enables the weak pulldowns on the USB transceiver.
|
|
#define USB0_OBSERVE *(volatile uint8_t *)0x40072104 // USB OTG Observe Register
|
|
#define USB_OBSERVE_DPPU (uint8_t)0x80 //
|
|
#define USB_OBSERVE_DPPD (uint8_t)0x40 //
|
|
#define USB_OBSERVE_DMPD (uint8_t)0x10 //
|
|
#define USB0_CONTROL *(volatile uint8_t *)0x40072108 // USB OTG Control Register
|
|
#define USB_CONTROL_DPPULLUPNONOTG (uint8_t)0x10 // Provides control of the DP PULLUP in the USB OTG module, if USB is configured in non-OTG device mode.
|
|
#define USB0_USBTRC0 *(volatile uint8_t *)0x4007210C // USB Transceiver Control Register 0
|
|
#define USB_USBTRC_USBRESET (uint8_t)0x80 //
|
|
#define USB_USBTRC_USBRESMEN (uint8_t)0x20 //
|
|
#define USB_USBTRC_SYNC_DET (uint8_t)0x02 //
|
|
#define USB_USBTRC_USB_RESUME_INT (uint8_t)0x01 //
|
|
#define USB0_USBFRMADJUST *(volatile uint8_t *)0x40072114 // Frame Adjust Register
|
|
|
|
// Chapter 41: USB Device Charger Detection Module (USBDCD)
|
|
#define USBDCD_CONTROL *(volatile uint32_t *)0x40035000 // Control register
|
|
#define USBDCD_CLOCK *(volatile uint32_t *)0x40035004 // Clock register
|
|
#define USBDCD_STATUS *(volatile uint32_t *)0x40035008 // Status register
|
|
#define USBDCD_TIMER0 *(volatile uint32_t *)0x40035010 // TIMER0 register
|
|
#define USBDCD_TIMER1 *(volatile uint32_t *)0x40035014 // TIMER1 register
|
|
#define USBDCD_TIMER2 *(volatile uint32_t *)0x40035018 // TIMER2 register
|
|
|
|
// Chapter 43: SPI (DSPI)
|
|
#define SPI0_MCR *(volatile uint32_t *)0x4002C000 // DSPI Module Configuration Register
|
|
#define SPI_MCR_MSTR (uint32_t)0x80000000 // Master/Slave Mode Select
|
|
#define SPI_MCR_CONT_SCKE (uint32_t)0x40000000 //
|
|
#define SPI_MCR_DCONF(n) (((n) & 3) << 28) //
|
|
#define SPI_MCR_FRZ (uint32_t)0x08000000 //
|
|
#define SPI_MCR_MTFE (uint32_t)0x04000000 //
|
|
#define SPI_MCR_ROOE (uint32_t)0x01000000 //
|
|
#define SPI_MCR_PCSIS(n) (((n) & 0x1F) << 16) //
|
|
#define SPI_MCR_DOZE (uint32_t)0x00008000 //
|
|
#define SPI_MCR_MDIS (uint32_t)0x00004000 //
|
|
#define SPI_MCR_DIS_TXF (uint32_t)0x00002000 //
|
|
#define SPI_MCR_DIS_RXF (uint32_t)0x00001000 //
|
|
#define SPI_MCR_CLR_TXF (uint32_t)0x00000800 //
|
|
#define SPI_MCR_CLR_RXF (uint32_t)0x00000400 //
|
|
#define SPI_MCR_SMPL_PT(n) (((n) & 3) << 8) //
|
|
#define SPI_MCR_HALT (uint32_t)0x00000001 //
|
|
#define SPI0_TCR *(volatile uint32_t *)0x4002C008 // DSPI Transfer Count Register
|
|
#define SPI0_CTAR0 *(volatile uint32_t *)0x4002C00C // DSPI Clock and Transfer Attributes Register, In Master Mode
|
|
#define SPI_CTAR_DBR (uint32_t)0x80000000 // Double Baud Rate
|
|
#define SPI_CTAR_FMSZ(n) (((n) & 15) << 27) // Frame Size (+1)
|
|
#define SPI_CTAR_CPOL (uint32_t)0x04000000 // Clock Polarity
|
|
#define SPI_CTAR_CPHA (uint32_t)0x02000000 // Clock Phase
|
|
#define SPI_CTAR_LSBFE (uint32_t)0x01000000 // LSB First
|
|
#define SPI_CTAR_PCSSCK(n) (((n) & 3) << 22) // PCS to SCK Delay Prescaler
|
|
#define SPI_CTAR_PASC(n) (((n) & 3) << 20) // After SCK Delay Prescaler
|
|
#define SPI_CTAR_PDT(n) (((n) & 3) << 18) // Delay after Transfer Prescaler
|
|
#define SPI_CTAR_PBR(n) (((n) & 3) << 16) // Baud Rate Prescaler
|
|
#define SPI_CTAR_CSSCK(n) (((n) & 15) << 12) // PCS to SCK Delay Scaler
|
|
#define SPI_CTAR_ASC(n) (((n) & 15) << 8) // After SCK Delay Scaler
|
|
#define SPI_CTAR_DT(n) (((n) & 15) << 4) // Delay After Transfer Scaler
|
|
#define SPI_CTAR_BR(n) (((n) & 15) << 0) // Baud Rate Scaler
|
|
#define SPI0_CTAR0_SLAVE *(volatile uint32_t *)0x4002C00C // DSPI Clock and Transfer Attributes Register, In Slave Mode
|
|
#define SPI0_CTAR1 *(volatile uint32_t *)0x4002C010 // DSPI Clock and Transfer Attributes Register, In Master Mode
|
|
#define SPI0_SR *(volatile uint32_t *)0x4002C02C // DSPI Status Register
|
|
#define SPI_SR_TCF (uint32_t)0x80000000 // Transfer Complete Flag
|
|
#define SPI_SR_TXRXS (uint32_t)0x40000000 // TX and RX Status
|
|
#define SPI_SR_EOQF (uint32_t)0x10000000 // End of Queue Flag
|
|
#define SPI_SR_TFUF (uint32_t)0x08000000 // Transmit FIFO Underflow Flag
|
|
#define SPI_SR_TFFF (uint32_t)0x02000000 // Transmit FIFO Fill Flag
|
|
#define SPI_SR_RFOF (uint32_t)0x00080000 // Receive FIFO Overflow Flag
|
|
#define SPI_SR_RFDF (uint32_t)0x00020000 // Receive FIFO Drain Flag
|
|
#define SPI0_RSER *(volatile uint32_t *)0x4002C030 // DSPI DMA/Interrupt Request Select and Enable Register
|
|
#define SPI_RSER_TCF_RE (uint32_t)0x80000000 // Transmission Complete Request Enable
|
|
#define SPI_RSER_EOQF_RE (uint32_t)0x10000000 // DSPI Finished Request Request Enable
|
|
#define SPI_RSER_TFUF_RE (uint32_t)0x08000000 // Transmit FIFO Underflow Request Enable
|
|
#define SPI_RSER_TFFF_RE (uint32_t)0x02000000 // Transmit FIFO Fill Request Enable
|
|
#define SPI_RSER_TFFF_DIRS (uint32_t)0x01000000 // Transmit FIFO FIll Dma or Interrupt Request Select
|
|
#define SPI_RSER_RFOF_RE (uint32_t)0x00080000 // Receive FIFO Overflow Request Enable
|
|
#define SPI_RSER_RFDF_RE (uint32_t)0x00020000 // Receive FIFO Drain Request Enable
|
|
#define SPI_RSER_RFDF_DIRS (uint32_t)0x00010000 // Receive FIFO Drain DMA or Interrupt Request Select
|
|
#define SPI0_PUSHR *(volatile uint32_t *)0x4002C034 // DSPI PUSH TX FIFO Register In Master Mode
|
|
#define SPI_PUSHR_CONT (uint32_t)0x80000000 //
|
|
#define SPI_PUSHR_CTAS(n) (((n) & 7) << 28) //
|
|
#define SPI_PUSHR_EOQ (uint32_t)0x08000000 //
|
|
#define SPI_PUSHR_CTCNT (uint32_t)0x04000000 //
|
|
#define SPI_PUSHR_PCS(n) (((n) & 31) << 16) //
|
|
#define SPI0_PUSHR_SLAVE *(volatile uint32_t *)0x4002C034 // DSPI PUSH TX FIFO Register In Slave Mode
|
|
#define SPI0_POPR *(volatile uint32_t *)0x4002C038 // DSPI POP RX FIFO Register
|
|
#define SPI0_TXFR0 *(volatile uint32_t *)0x4002C03C // DSPI Transmit FIFO Registers
|
|
#define SPI0_TXFR1 *(volatile uint32_t *)0x4002C040 // DSPI Transmit FIFO Registers
|
|
#define SPI0_TXFR2 *(volatile uint32_t *)0x4002C044 // DSPI Transmit FIFO Registers
|
|
#define SPI0_TXFR3 *(volatile uint32_t *)0x4002C048 // DSPI Transmit FIFO Registers
|
|
#define SPI0_RXFR0 *(volatile uint32_t *)0x4002C07C // DSPI Receive FIFO Registers
|
|
#define SPI0_RXFR1 *(volatile uint32_t *)0x4002C080 // DSPI Receive FIFO Registers
|
|
#define SPI0_RXFR2 *(volatile uint32_t *)0x4002C084 // DSPI Receive FIFO Registers
|
|
#define SPI0_RXFR3 *(volatile uint32_t *)0x4002C088 // DSPI Receive FIFO Registers
|
|
typedef struct {
|
|
volatile uint32_t MCR; // 0
|
|
volatile uint32_t unused1;// 4
|
|
volatile uint32_t TCR; // 8
|
|
volatile uint32_t CTAR0; // c
|
|
volatile uint32_t CTAR1; // 10
|
|
volatile uint32_t CTAR2; // 14
|
|
volatile uint32_t CTAR3; // 18
|
|
volatile uint32_t CTAR4; // 1c
|
|
volatile uint32_t CTAR5; // 20
|
|
volatile uint32_t CTAR6; // 24
|
|
volatile uint32_t CTAR7; // 28
|
|
volatile uint32_t SR; // 2c
|
|
volatile uint32_t RSER; // 30
|
|
volatile uint32_t PUSHR; // 34
|
|
volatile uint32_t POPR; // 38
|
|
volatile uint32_t TXFR[16]; // 3c
|
|
volatile uint32_t RXFR[16]; // 7c
|
|
} SPI_t;
|
|
#define SPI0 (*(SPI_t *)0x4002C000)
|
|
|
|
// Chapter 44: Inter-Integrated Circuit (I2C)
|
|
#define I2C0_A1 *(volatile uint8_t *)0x40066000 // I2C Address Register 1
|
|
#define I2C0_F *(volatile uint8_t *)0x40066001 // I2C Frequency Divider register
|
|
#define I2C0_C1 *(volatile uint8_t *)0x40066002 // I2C Control Register 1
|
|
#define I2C_C1_IICEN (uint8_t)0x80 // I2C Enable
|
|
#define I2C_C1_IICIE (uint8_t)0x40 // I2C Interrupt Enable
|
|
#define I2C_C1_MST (uint8_t)0x20 // Master Mode Select
|
|
#define I2C_C1_TX (uint8_t)0x10 // Transmit Mode Select
|
|
#define I2C_C1_TXAK (uint8_t)0x08 // Transmit Acknowledge Enable
|
|
#define I2C_C1_RSTA (uint8_t)0x04 // Repeat START
|
|
#define I2C_C1_WUEN (uint8_t)0x02 // Wakeup Enable
|
|
#define I2C_C1_DMAEN (uint8_t)0x01 // DMA Enable
|
|
#define I2C0_S *(volatile uint8_t *)0x40066003 // I2C Status register
|
|
#define I2C_S_TCF (uint8_t)0x80 // Transfer Complete Flag
|
|
#define I2C_S_IAAS (uint8_t)0x40 // Addressed As A Slave
|
|
#define I2C_S_BUSY (uint8_t)0x20 // Bus Busy
|
|
#define I2C_S_ARBL (uint8_t)0x10 // Arbitration Lost
|
|
#define I2C_S_RAM (uint8_t)0x08 // Range Address Match
|
|
#define I2C_S_SRW (uint8_t)0x04 // Slave Read/Write
|
|
#define I2C_S_IICIF (uint8_t)0x02 // Interrupt Flag
|
|
#define I2C_S_RXAK (uint8_t)0x01 // Receive Acknowledge
|
|
#define I2C0_D *(volatile uint8_t *)0x40066004 // I2C Data I/O register
|
|
#define I2C0_C2 *(volatile uint8_t *)0x40066005 // I2C Control Register 2
|
|
#define I2C_C2_GCAEN (uint8_t)0x80 // General Call Address Enable
|
|
#define I2C_C2_ADEXT (uint8_t)0x40 // Address Extension
|
|
#define I2C_C2_HDRS (uint8_t)0x20 // High Drive Select
|
|
#define I2C_C2_SBRC (uint8_t)0x10 // Slave Baud Rate Control
|
|
#define I2C_C2_RMEN (uint8_t)0x08 // Range Address Matching Enable
|
|
#define I2C_C2_AD(n) ((n) & 7) // Slave Address, upper 3 bits
|
|
#define I2C0_FLT *(volatile uint8_t *)0x40066006 // I2C Programmable Input Glitch Filter register
|
|
#define I2C0_RA *(volatile uint8_t *)0x40066007 // I2C Range Address register
|
|
#define I2C0_SMB *(volatile uint8_t *)0x40066008 // I2C SMBus Control and Status register
|
|
#define I2C0_A2 *(volatile uint8_t *)0x40066009 // I2C Address Register 2
|
|
#define I2C0_SLTH *(volatile uint8_t *)0x4006600A // I2C SCL Low Timeout Register High
|
|
#define I2C0_SLTL *(volatile uint8_t *)0x4006600B // I2C SCL Low Timeout Register Low
|
|
|
|
#define I2C1_A1 *(volatile uint8_t *)0x40067000 // I2C Address Register 1
|
|
#define I2C1_F *(volatile uint8_t *)0x40067001 // I2C Frequency Divider register
|
|
#define I2C1_C1 *(volatile uint8_t *)0x40067002 // I2C Control Register 1
|
|
#define I2C1_S *(volatile uint8_t *)0x40067003 // I2C Status register
|
|
#define I2C1_D *(volatile uint8_t *)0x40067004 // I2C Data I/O register
|
|
#define I2C1_C2 *(volatile uint8_t *)0x40067005 // I2C Control Register 2
|
|
#define I2C1_FLT *(volatile uint8_t *)0x40067006 // I2C Programmable Input Glitch Filter register
|
|
#define I2C1_RA *(volatile uint8_t *)0x40067007 // I2C Range Address register
|
|
#define I2C1_SMB *(volatile uint8_t *)0x40067008 // I2C SMBus Control and Status register
|
|
#define I2C1_A2 *(volatile uint8_t *)0x40067009 // I2C Address Register 2
|
|
#define I2C1_SLTH *(volatile uint8_t *)0x4006700A // I2C SCL Low Timeout Register High
|
|
#define I2C1_SLTL *(volatile uint8_t *)0x4006700B // I2C SCL Low Timeout Register Low
|
|
|
|
// Chapter 45: Universal Asynchronous Receiver/Transmitter (UART)
|
|
#define UART0_BDH *(volatile uint8_t *)0x4006A000 // UART Baud Rate Registers: High
|
|
#define UART0_BDL *(volatile uint8_t *)0x4006A001 // UART Baud Rate Registers: Low
|
|
#define UART0_C1 *(volatile uint8_t *)0x4006A002 // UART Control Register 1
|
|
#define UART_C1_LOOPS (uint8_t)0x80 // When LOOPS is set, the RxD pin is disconnected from the UART and the transmitter output is internally connected to the receiver input
|
|
#define UART_C1_UARTSWAI (uint8_t)0x40 // UART Stops in Wait Mode
|
|
#define UART_C1_RSRC (uint8_t)0x20 // When LOOPS is set, the RSRC field determines the source for the receiver shift register input
|
|
#define UART_C1_M (uint8_t)0x10 // 9-bit or 8-bit Mode Select
|
|
#define UART_C1_WAKE (uint8_t)0x08 // Determines which condition wakes the UART
|
|
#define UART_C1_ILT (uint8_t)0x04 // Idle Line Type Select
|
|
#define UART_C1_PE (uint8_t)0x02 // Parity Enable
|
|
#define UART_C1_PT (uint8_t)0x01 // Parity Type, 0=even, 1=odd
|
|
#define UART0_C2 *(volatile uint8_t *)0x4006A003 // UART Control Register 2
|
|
#define UART_C2_TIE (uint8_t)0x80 // Transmitter Interrupt or DMA Transfer Enable.
|
|
#define UART_C2_TCIE (uint8_t)0x40 // Transmission Complete Interrupt Enable
|
|
#define UART_C2_RIE (uint8_t)0x20 // Receiver Full Interrupt or DMA Transfer Enable
|
|
#define UART_C2_ILIE (uint8_t)0x10 // Idle Line Interrupt Enable
|
|
#define UART_C2_TE (uint8_t)0x08 // Transmitter Enable
|
|
#define UART_C2_RE (uint8_t)0x04 // Receiver Enable
|
|
#define UART_C2_RWU (uint8_t)0x02 // Receiver Wakeup Control
|
|
#define UART_C2_SBK (uint8_t)0x01 // Send Break
|
|
#define UART0_S1 *(volatile uint8_t *)0x4006A004 // UART Status Register 1
|
|
#define UART_S1_TDRE (uint8_t)0x80 // Transmit Data Register Empty Flag
|
|
#define UART_S1_TC (uint8_t)0x40 // Transmit Complete Flag
|
|
#define UART_S1_RDRF (uint8_t)0x20 // Receive Data Register Full Flag
|
|
#define UART_S1_IDLE (uint8_t)0x10 // Idle Line Flag
|
|
#define UART_S1_OR (uint8_t)0x08 // Receiver Overrun Flag
|
|
#define UART_S1_NF (uint8_t)0x04 // Noise Flag
|
|
#define UART_S1_FE (uint8_t)0x02 // Framing Error Flag
|
|
#define UART_S1_PF (uint8_t)0x01 // Parity Error Flag
|
|
#define UART0_S2 *(volatile uint8_t *)0x4006A005 // UART Status Register 2
|
|
#define UART0_C3 *(volatile uint8_t *)0x4006A006 // UART Control Register 3
|
|
#define UART0_D *(volatile uint8_t *)0x4006A007 // UART Data Register
|
|
#define UART0_MA1 *(volatile uint8_t *)0x4006A008 // UART Match Address Registers 1
|
|
#define UART0_MA2 *(volatile uint8_t *)0x4006A009 // UART Match Address Registers 2
|
|
#define UART0_C4 *(volatile uint8_t *)0x4006A00A // UART Control Register 4
|
|
#define UART0_C5 *(volatile uint8_t *)0x4006A00B // UART Control Register 5
|
|
#define UART0_ED *(volatile uint8_t *)0x4006A00C // UART Extended Data Register
|
|
#define UART0_MODEM *(volatile uint8_t *)0x4006A00D // UART Modem Register
|
|
#define UART0_IR *(volatile uint8_t *)0x4006A00E // UART Infrared Register
|
|
#define UART0_PFIFO *(volatile uint8_t *)0x4006A010 // UART FIFO Parameters
|
|
#define UART_PFIFO_TXFE (uint8_t)0x80
|
|
#define UART_PFIFO_RXFE (uint8_t)0x08
|
|
#define UART0_CFIFO *(volatile uint8_t *)0x4006A011 // UART FIFO Control Register
|
|
#define UART_CFIFO_TXFLUSH (uint8_t)0x80 //
|
|
#define UART_CFIFO_RXFLUSH (uint8_t)0x40 //
|
|
#define UART_CFIFO_RXOFE (uint8_t)0x04 //
|
|
#define UART_CFIFO_TXOFE (uint8_t)0x02 //
|
|
#define UART_CFIFO_RXUFE (uint8_t)0x01 //
|
|
#define UART0_SFIFO *(volatile uint8_t *)0x4006A012 // UART FIFO Status Register
|
|
#define UART_SFIFO_TXEMPT (uint8_t)0x80
|
|
#define UART_SFIFO_RXEMPT (uint8_t)0x40
|
|
#define UART_SFIFO_RXOF (uint8_t)0x04
|
|
#define UART_SFIFO_TXOF (uint8_t)0x02
|
|
#define UART_SFIFO_RXUF (uint8_t)0x01
|
|
#define UART0_TWFIFO *(volatile uint8_t *)0x4006A013 // UART FIFO Transmit Watermark
|
|
#define UART0_TCFIFO *(volatile uint8_t *)0x4006A014 // UART FIFO Transmit Count
|
|
#define UART0_RWFIFO *(volatile uint8_t *)0x4006A015 // UART FIFO Receive Watermark
|
|
#define UART0_RCFIFO *(volatile uint8_t *)0x4006A016 // UART FIFO Receive Count
|
|
#define UART0_C7816 *(volatile uint8_t *)0x4006A018 // UART 7816 Control Register
|
|
#define UART0_IE7816 *(volatile uint8_t *)0x4006A019 // UART 7816 Interrupt Enable Register
|
|
#define UART0_IS7816 *(volatile uint8_t *)0x4006A01A // UART 7816 Interrupt Status Register
|
|
#define UART0_WP7816T0 *(volatile uint8_t *)0x4006A01B // UART 7816 Wait Parameter Register
|
|
#define UART0_WP7816T1 *(volatile uint8_t *)0x4006A01B // UART 7816 Wait Parameter Register
|
|
#define UART0_WN7816 *(volatile uint8_t *)0x4006A01C // UART 7816 Wait N Register
|
|
#define UART0_WF7816 *(volatile uint8_t *)0x4006A01D // UART 7816 Wait FD Register
|
|
#define UART0_ET7816 *(volatile uint8_t *)0x4006A01E // UART 7816 Error Threshold Register
|
|
#define UART0_TL7816 *(volatile uint8_t *)0x4006A01F // UART 7816 Transmit Length Register
|
|
#define UART0_C6 *(volatile uint8_t *)0x4006A021 // UART CEA709.1-B Control Register 6
|
|
#define UART0_PCTH *(volatile uint8_t *)0x4006A022 // UART CEA709.1-B Packet Cycle Time Counter High
|
|
#define UART0_PCTL *(volatile uint8_t *)0x4006A023 // UART CEA709.1-B Packet Cycle Time Counter Low
|
|
#define UART0_B1T *(volatile uint8_t *)0x4006A024 // UART CEA709.1-B Beta1 Timer
|
|
#define UART0_SDTH *(volatile uint8_t *)0x4006A025 // UART CEA709.1-B Secondary Delay Timer High
|
|
#define UART0_SDTL *(volatile uint8_t *)0x4006A026 // UART CEA709.1-B Secondary Delay Timer Low
|
|
#define UART0_PRE *(volatile uint8_t *)0x4006A027 // UART CEA709.1-B Preamble
|
|
#define UART0_TPL *(volatile uint8_t *)0x4006A028 // UART CEA709.1-B Transmit Packet Length
|
|
#define UART0_IE *(volatile uint8_t *)0x4006A029 // UART CEA709.1-B Interrupt Enable Register
|
|
#define UART0_WB *(volatile uint8_t *)0x4006A02A // UART CEA709.1-B WBASE
|
|
#define UART0_S3 *(volatile uint8_t *)0x4006A02B // UART CEA709.1-B Status Register
|
|
#define UART0_S4 *(volatile uint8_t *)0x4006A02C // UART CEA709.1-B Status Register
|
|
#define UART0_RPL *(volatile uint8_t *)0x4006A02D // UART CEA709.1-B Received Packet Length
|
|
#define UART0_RPREL *(volatile uint8_t *)0x4006A02E // UART CEA709.1-B Received Preamble Length
|
|
#define UART0_CPW *(volatile uint8_t *)0x4006A02F // UART CEA709.1-B Collision Pulse Width
|
|
#define UART0_RIDT *(volatile uint8_t *)0x4006A030 // UART CEA709.1-B Receive Indeterminate Time
|
|
#define UART0_TIDT *(volatile uint8_t *)0x4006A031 // UART CEA709.1-B Transmit Indeterminate Time
|
|
#define UART1_BDH *(volatile uint8_t *)0x4006B000 // UART Baud Rate Registers: High
|
|
#define UART1_BDL *(volatile uint8_t *)0x4006B001 // UART Baud Rate Registers: Low
|
|
#define UART1_C1 *(volatile uint8_t *)0x4006B002 // UART Control Register 1
|
|
#define UART1_C2 *(volatile uint8_t *)0x4006B003 // UART Control Register 2
|
|
#define UART1_S1 *(volatile uint8_t *)0x4006B004 // UART Status Register 1
|
|
#define UART1_S2 *(volatile uint8_t *)0x4006B005 // UART Status Register 2
|
|
#define UART1_C3 *(volatile uint8_t *)0x4006B006 // UART Control Register 3
|
|
#define UART1_D *(volatile uint8_t *)0x4006B007 // UART Data Register
|
|
#define UART1_MA1 *(volatile uint8_t *)0x4006B008 // UART Match Address Registers 1
|
|
#define UART1_MA2 *(volatile uint8_t *)0x4006B009 // UART Match Address Registers 2
|
|
#define UART1_C4 *(volatile uint8_t *)0x4006B00A // UART Control Register 4
|
|
#define UART1_C5 *(volatile uint8_t *)0x4006B00B // UART Control Register 5
|
|
#define UART1_ED *(volatile uint8_t *)0x4006B00C // UART Extended Data Register
|
|
#define UART1_MODEM *(volatile uint8_t *)0x4006B00D // UART Modem Register
|
|
#define UART1_IR *(volatile uint8_t *)0x4006B00E // UART Infrared Register
|
|
#define UART1_PFIFO *(volatile uint8_t *)0x4006B010 // UART FIFO Parameters
|
|
#define UART1_CFIFO *(volatile uint8_t *)0x4006B011 // UART FIFO Control Register
|
|
#define UART1_SFIFO *(volatile uint8_t *)0x4006B012 // UART FIFO Status Register
|
|
#define UART1_TWFIFO *(volatile uint8_t *)0x4006B013 // UART FIFO Transmit Watermark
|
|
#define UART1_TCFIFO *(volatile uint8_t *)0x4006B014 // UART FIFO Transmit Count
|
|
#define UART1_RWFIFO *(volatile uint8_t *)0x4006B015 // UART FIFO Receive Watermark
|
|
#define UART1_RCFIFO *(volatile uint8_t *)0x4006B016 // UART FIFO Receive Count
|
|
#define UART1_C7816 *(volatile uint8_t *)0x4006B018 // UART 7816 Control Register
|
|
#define UART1_IE7816 *(volatile uint8_t *)0x4006B019 // UART 7816 Interrupt Enable Register
|
|
#define UART1_IS7816 *(volatile uint8_t *)0x4006B01A // UART 7816 Interrupt Status Register
|
|
#define UART1_WP7816T0 *(volatile uint8_t *)0x4006B01B // UART 7816 Wait Parameter Register
|
|
#define UART1_WP7816T1 *(volatile uint8_t *)0x4006B01B // UART 7816 Wait Parameter Register
|
|
#define UART1_WN7816 *(volatile uint8_t *)0x4006B01C // UART 7816 Wait N Register
|
|
#define UART1_WF7816 *(volatile uint8_t *)0x4006B01D // UART 7816 Wait FD Register
|
|
#define UART1_ET7816 *(volatile uint8_t *)0x4006B01E // UART 7816 Error Threshold Register
|
|
#define UART1_TL7816 *(volatile uint8_t *)0x4006B01F // UART 7816 Transmit Length Register
|
|
#define UART1_C6 *(volatile uint8_t *)0x4006B021 // UART CEA709.1-B Control Register 6
|
|
#define UART1_PCTH *(volatile uint8_t *)0x4006B022 // UART CEA709.1-B Packet Cycle Time Counter High
|
|
#define UART1_PCTL *(volatile uint8_t *)0x4006B023 // UART CEA709.1-B Packet Cycle Time Counter Low
|
|
#define UART1_B1T *(volatile uint8_t *)0x4006B024 // UART CEA709.1-B Beta1 Timer
|
|
#define UART1_SDTH *(volatile uint8_t *)0x4006B025 // UART CEA709.1-B Secondary Delay Timer High
|
|
#define UART1_SDTL *(volatile uint8_t *)0x4006B026 // UART CEA709.1-B Secondary Delay Timer Low
|
|
#define UART1_PRE *(volatile uint8_t *)0x4006B027 // UART CEA709.1-B Preamble
|
|
#define UART1_TPL *(volatile uint8_t *)0x4006B028 // UART CEA709.1-B Transmit Packet Length
|
|
#define UART1_IE *(volatile uint8_t *)0x4006B029 // UART CEA709.1-B Interrupt Enable Register
|
|
#define UART1_WB *(volatile uint8_t *)0x4006B02A // UART CEA709.1-B WBASE
|
|
#define UART1_S3 *(volatile uint8_t *)0x4006B02B // UART CEA709.1-B Status Register
|
|
#define UART1_S4 *(volatile uint8_t *)0x4006B02C // UART CEA709.1-B Status Register
|
|
#define UART1_RPL *(volatile uint8_t *)0x4006B02D // UART CEA709.1-B Received Packet Length
|
|
#define UART1_RPREL *(volatile uint8_t *)0x4006B02E // UART CEA709.1-B Received Preamble Length
|
|
#define UART1_CPW *(volatile uint8_t *)0x4006B02F // UART CEA709.1-B Collision Pulse Width
|
|
#define UART1_RIDT *(volatile uint8_t *)0x4006B030 // UART CEA709.1-B Receive Indeterminate Time
|
|
#define UART1_TIDT *(volatile uint8_t *)0x4006B031 // UART CEA709.1-B Transmit Indeterminate Time
|
|
#define UART2_BDH *(volatile uint8_t *)0x4006C000 // UART Baud Rate Registers: High
|
|
#define UART2_BDL *(volatile uint8_t *)0x4006C001 // UART Baud Rate Registers: Low
|
|
#define UART2_C1 *(volatile uint8_t *)0x4006C002 // UART Control Register 1
|
|
#define UART2_C2 *(volatile uint8_t *)0x4006C003 // UART Control Register 2
|
|
#define UART2_S1 *(volatile uint8_t *)0x4006C004 // UART Status Register 1
|
|
#define UART2_S2 *(volatile uint8_t *)0x4006C005 // UART Status Register 2
|
|
#define UART2_C3 *(volatile uint8_t *)0x4006C006 // UART Control Register 3
|
|
#define UART2_D *(volatile uint8_t *)0x4006C007 // UART Data Register
|
|
#define UART2_MA1 *(volatile uint8_t *)0x4006C008 // UART Match Address Registers 1
|
|
#define UART2_MA2 *(volatile uint8_t *)0x4006C009 // UART Match Address Registers 2
|
|
#define UART2_C4 *(volatile uint8_t *)0x4006C00A // UART Control Register 4
|
|
#define UART2_C5 *(volatile uint8_t *)0x4006C00B // UART Control Register 5
|
|
#define UART2_ED *(volatile uint8_t *)0x4006C00C // UART Extended Data Register
|
|
#define UART2_MODEM *(volatile uint8_t *)0x4006C00D // UART Modem Register
|
|
#define UART2_IR *(volatile uint8_t *)0x4006C00E // UART Infrared Register
|
|
#define UART2_PFIFO *(volatile uint8_t *)0x4006C010 // UART FIFO Parameters
|
|
#define UART2_CFIFO *(volatile uint8_t *)0x4006C011 // UART FIFO Control Register
|
|
#define UART2_SFIFO *(volatile uint8_t *)0x4006C012 // UART FIFO Status Register
|
|
#define UART2_TWFIFO *(volatile uint8_t *)0x4006C013 // UART FIFO Transmit Watermark
|
|
#define UART2_TCFIFO *(volatile uint8_t *)0x4006C014 // UART FIFO Transmit Count
|
|
#define UART2_RWFIFO *(volatile uint8_t *)0x4006C015 // UART FIFO Receive Watermark
|
|
#define UART2_RCFIFO *(volatile uint8_t *)0x4006C016 // UART FIFO Receive Count
|
|
#define UART2_C7816 *(volatile uint8_t *)0x4006C018 // UART 7816 Control Register
|
|
#define UART2_IE7816 *(volatile uint8_t *)0x4006C019 // UART 7816 Interrupt Enable Register
|
|
#define UART2_IS7816 *(volatile uint8_t *)0x4006C01A // UART 7816 Interrupt Status Register
|
|
#define UART2_WP7816T0 *(volatile uint8_t *)0x4006C01B // UART 7816 Wait Parameter Register
|
|
#define UART2_WP7816T1 *(volatile uint8_t *)0x4006C01B // UART 7816 Wait Parameter Register
|
|
#define UART2_WN7816 *(volatile uint8_t *)0x4006C01C // UART 7816 Wait N Register
|
|
#define UART2_WF7816 *(volatile uint8_t *)0x4006C01D // UART 7816 Wait FD Register
|
|
#define UART2_ET7816 *(volatile uint8_t *)0x4006C01E // UART 7816 Error Threshold Register
|
|
#define UART2_TL7816 *(volatile uint8_t *)0x4006C01F // UART 7816 Transmit Length Register
|
|
#define UART2_C6 *(volatile uint8_t *)0x4006C021 // UART CEA709.1-B Control Register 6
|
|
#define UART2_PCTH *(volatile uint8_t *)0x4006C022 // UART CEA709.1-B Packet Cycle Time Counter High
|
|
#define UART2_PCTL *(volatile uint8_t *)0x4006C023 // UART CEA709.1-B Packet Cycle Time Counter Low
|
|
#define UART2_B1T *(volatile uint8_t *)0x4006C024 // UART CEA709.1-B Beta1 Timer
|
|
#define UART2_SDTH *(volatile uint8_t *)0x4006C025 // UART CEA709.1-B Secondary Delay Timer High
|
|
#define UART2_SDTL *(volatile uint8_t *)0x4006C026 // UART CEA709.1-B Secondary Delay Timer Low
|
|
#define UART2_PRE *(volatile uint8_t *)0x4006C027 // UART CEA709.1-B Preamble
|
|
#define UART2_TPL *(volatile uint8_t *)0x4006C028 // UART CEA709.1-B Transmit Packet Length
|
|
#define UART2_IE *(volatile uint8_t *)0x4006C029 // UART CEA709.1-B Interrupt Enable Register
|
|
#define UART2_WB *(volatile uint8_t *)0x4006C02A // UART CEA709.1-B WBASE
|
|
#define UART2_S3 *(volatile uint8_t *)0x4006C02B // UART CEA709.1-B Status Register
|
|
#define UART2_S4 *(volatile uint8_t *)0x4006C02C // UART CEA709.1-B Status Register
|
|
#define UART2_RPL *(volatile uint8_t *)0x4006C02D // UART CEA709.1-B Received Packet Length
|
|
#define UART2_RPREL *(volatile uint8_t *)0x4006C02E // UART CEA709.1-B Received Preamble Length
|
|
#define UART2_CPW *(volatile uint8_t *)0x4006C02F // UART CEA709.1-B Collision Pulse Width
|
|
#define UART2_RIDT *(volatile uint8_t *)0x4006C030 // UART CEA709.1-B Receive Indeterminate Time
|
|
#define UART2_TIDT *(volatile uint8_t *)0x4006C031 // UART CEA709.1-B Transmit Indeterminate Time
|
|
|
|
// Chapter 46: Synchronous Audio Interface (SAI)
|
|
#define I2S0_TCSR *(volatile uint32_t *)0x4002F000 // SAI Transmit Control Register
|
|
#define I2S_TCSR_TE (uint32_t)0x80000000 // Transmitter Enable
|
|
#define I2S_TCSR_STOPE (uint32_t)0x40000000 // Transmitter Enable in Stop mode
|
|
#define I2S_TCSR_DBGE (uint32_t)0x20000000 // Transmitter Enable in Debug mode
|
|
#define I2S_TCSR_BCE (uint32_t)0x10000000 // Bit Clock Enable
|
|
#define I2S_TCSR_FR (uint32_t)0x02000000 // FIFO Reset
|
|
#define I2S_TCSR_SR (uint32_t)0x01000000 // Software Reset
|
|
#define I2S_TCSR_WSF (uint32_t)0x00100000 // Word Start Flag
|
|
#define I2S_TCSR_SEF (uint32_t)0x00080000 // Sync Error Flag
|
|
#define I2S_TCSR_FEF (uint32_t)0x00040000 // FIFO Error Flag (underrun)
|
|
#define I2S_TCSR_FWF (uint32_t)0x00020000 // FIFO Warning Flag (empty)
|
|
#define I2S_TCSR_FRF (uint32_t)0x00010000 // FIFO Request Flag (Data Ready)
|
|
#define I2S_TCSR_WSIE (uint32_t)0x00001000 // Word Start Interrupt Enable
|
|
#define I2S_TCSR_SEIE (uint32_t)0x00000800 // Sync Error Interrupt Enable
|
|
#define I2S_TCSR_FEIE (uint32_t)0x00000400 // FIFO Error Interrupt Enable
|
|
#define I2S_TCSR_FWIE (uint32_t)0x00000200 // FIFO Warning Interrupt Enable
|
|
#define I2S_TCSR_FRIE (uint32_t)0x00000100 // FIFO Request Interrupt Enable
|
|
#define I2S_TCSR_FWDE (uint32_t)0x00000002 // FIFO Warning DMA Enable
|
|
#define I2S_TCSR_FRDE (uint32_t)0x00000001 // FIFO Request DMA Enable
|
|
#define I2S0_TCR1 *(volatile uint32_t *)0x4002F004 // SAI Transmit Configuration 1 Register
|
|
#define I2S_TCR1_TFW(n) ((uint32_t)n & 0x03) // Transmit FIFO watermark
|
|
#define I2S0_TCR2 *(volatile uint32_t *)0x4002F008 // SAI Transmit Configuration 2 Register
|
|
#define I2S_TCR2_DIV(n) ((uint32_t)n & 0xff) // Bit clock divide by (DIV+1)*2
|
|
#define I2S_TCR2_BCD ((uint32_t)1<<24) // Bit clock direction
|
|
#define I2S_TCR2_BCP ((uint32_t)1<<25) // Bit clock polarity
|
|
#define I2S_TCR2_MSEL(n) ((uint32_t)(n & 3)<<26) // MCLK select, 0=bus clock, 1=I2S0_MCLK
|
|
#define I2S_TCR2_BCI ((uint32_t)1<<28) // Bit clock input
|
|
#define I2S_TCR2_BCS ((uint32_t)1<<29) // Bit clock swap
|
|
#define I2S_TCR2_SYNC(n) ((uint32_t)(n & 3)<<30) // 0=async 1=sync with receiver
|
|
#define I2S0_TCR3 *(volatile uint32_t *)0x4002F00C // SAI Transmit Configuration 3 Register
|
|
#define I2S_TCR3_WDFL(n) ((uint32_t)n & 0x0f) // word flag configuration
|
|
#define I2S_TCR3_TCE ((uint32_t)0x10000) // transmit channel enable
|
|
#define I2S0_TCR4 *(volatile uint32_t *)0x4002F010 // SAI Transmit Configuration 4 Register
|
|
#define I2S_TCR4_FSD ((uint32_t)1) // Frame Sync Direction
|
|
#define I2S_TCR4_FSP ((uint32_t)2) // Frame Sync Polarity
|
|
#define I2S_TCR4_FSE ((uint32_t)8) // Frame Sync Early
|
|
#define I2S_TCR4_MF ((uint32_t)0x10) // MSB First
|
|
#define I2S_TCR4_SYWD(n) ((uint32_t)(n & 0x1f)<<8) // Sync Width
|
|
#define I2S_TCR4_FRSZ(n) ((uint32_t)(n & 0x0f)<<16) // Frame Size
|
|
#define I2S0_TCR5 *(volatile uint32_t *)0x4002F014 // SAI Transmit Configuration 5 Register
|
|
#define I2S_TCR5_FBT(n) ((uint32_t)(n & 0x1f)<<8) // First Bit Shifted
|
|
#define I2S_TCR5_W0W(n) ((uint32_t)(n & 0x1f)<<16) // Word 0 Width
|
|
#define I2S_TCR5_WNW(n) ((uint32_t)(n & 0x1f)<<24) // Word N Width
|
|
#define I2S0_TDR0 *(volatile uint32_t *)0x4002F020 // SAI Transmit Data Register
|
|
#define I2S0_TDR1 *(volatile uint32_t *)0x4002F024 // SAI Transmit Data Register
|
|
#define I2S0_TFR0 *(volatile uint32_t *)0x4002F040 // SAI Transmit FIFO Register
|
|
#define I2S0_TFR1 *(volatile uint32_t *)0x4002F044 // SAI Transmit FIFO Register
|
|
#define I2S_TFR_RFP(n) ((uint32_t)n & 7) // read FIFO pointer
|
|
#define I2S_TFR_WFP(n) ((uint32_t)(n & 7)<<16) // write FIFO pointer
|
|
#define I2S0_TMR *(volatile uint32_t *)0x4002F060 // SAI Transmit Mask Register
|
|
#define I2S_TMR_TWM(n) ((uint32_t)n & 0xFFFFFFFF)
|
|
#define I2S0_RCSR *(volatile uint32_t *)0x4002F080 // SAI Receive Control Register
|
|
#define I2S_RCSR_RE (uint32_t)0x80000000 // Receiver Enable
|
|
#define I2S_RCSR_STOPE (uint32_t)0x40000000 // Receiver Enable in Stop mode
|
|
#define I2S_RCSR_DBGE (uint32_t)0x20000000 // Receiver Enable in Debug mode
|
|
#define I2S_RCSR_BCE (uint32_t)0x10000000 // Bit Clock Enable
|
|
#define I2S_RCSR_FR (uint32_t)0x02000000 // FIFO Reset
|
|
#define I2S_RCSR_SR (uint32_t)0x01000000 // Software Reset
|
|
#define I2S_RCSR_WSF (uint32_t)0x00100000 // Word Start Flag
|
|
#define I2S_RCSR_SEF (uint32_t)0x00080000 // Sync Error Flag
|
|
#define I2S_RCSR_FEF (uint32_t)0x00040000 // FIFO Error Flag (underrun)
|
|
#define I2S_RCSR_FWF (uint32_t)0x00020000 // FIFO Warning Flag (empty)
|
|
#define I2S_RCSR_FRF (uint32_t)0x00010000 // FIFO Request Flag (Data Ready)
|
|
#define I2S_RCSR_WSIE (uint32_t)0x00001000 // Word Start Interrupt Enable
|
|
#define I2S_RCSR_SEIE (uint32_t)0x00000800 // Sync Error Interrupt Enable
|
|
#define I2S_RCSR_FEIE (uint32_t)0x00000400 // FIFO Error Interrupt Enable
|
|
#define I2S_RCSR_FWIE (uint32_t)0x00000200 // FIFO Warning Interrupt Enable
|
|
#define I2S_RCSR_FRIE (uint32_t)0x00000100 // FIFO Request Interrupt Enable
|
|
#define I2S_RCSR_FWDE (uint32_t)0x00000002 // FIFO Warning DMA Enable
|
|
#define I2S_RCSR_FRDE (uint32_t)0x00000001 // FIFO Request DMA Enable
|
|
#define I2S0_RCR1 *(volatile uint32_t *)0x4002F084 // SAI Receive Configuration 1 Register
|
|
#define I2S_RCR1_RFW(n) ((uint32_t)n & 0x03) // Receive FIFO watermark
|
|
#define I2S0_RCR2 *(volatile uint32_t *)0x4002F088 // SAI Receive Configuration 2 Register
|
|
#define I2S_RCR2_DIV(n) ((uint32_t)n & 0xff) // Bit clock divide by (DIV+1)*2
|
|
#define I2S_RCR2_BCD ((uint32_t)1<<24) // Bit clock direction
|
|
#define I2S_RCR2_BCP ((uint32_t)1<<25) // Bit clock polarity
|
|
#define I2S_RCR2_MSEL(n) ((uint32_t)(n & 3)<<26) // MCLK select, 0=bus clock, 1=I2S0_MCLK
|
|
#define I2S_RCR2_BCI ((uint32_t)1<<28) // Bit clock input
|
|
#define I2S_RCR2_BCS ((uint32_t)1<<29) // Bit clock swap
|
|
#define I2S_RCR2_SYNC(n) ((uint32_t)(n & 3)<<30) // 0=async 1=sync with receiver
|
|
#define I2S0_RCR3 *(volatile uint32_t *)0x4002F08C // SAI Receive Configuration 3 Register
|
|
#define I2S_RCR3_WDFL(n) ((uint32_t)n & 0x0f) // word flag configuration
|
|
#define I2S_RCR3_RCE ((uint32_t)0x10000) // receive channel enable
|
|
#define I2S0_RCR4 *(volatile uint32_t *)0x4002F090 // SAI Receive Configuration 4 Register
|
|
#define I2S_RCR4_FSD ((uint32_t)1) // Frame Sync Direction
|
|
#define I2S_RCR4_FSP ((uint32_t)2) // Frame Sync Polarity
|
|
#define I2S_RCR4_FSE ((uint32_t)8) // Frame Sync Early
|
|
#define I2S_RCR4_MF ((uint32_t)0x10) // MSB First
|
|
#define I2S_RCR4_SYWD(n) ((uint32_t)(n & 0x1f)<<8) // Sync Width
|
|
#define I2S_RCR4_FRSZ(n) ((uint32_t)(n & 0x0f)<<16) // Frame Size
|
|
#define I2S0_RCR5 *(volatile uint32_t *)0x4002F094 // SAI Receive Configuration 5 Register
|
|
#define I2S_RCR5_FBT(n) ((uint32_t)(n & 0x1f)<<8) // First Bit Shifted
|
|
#define I2S_RCR5_W0W(n) ((uint32_t)(n & 0x1f)<<16) // Word 0 Width
|
|
#define I2S_RCR5_WNW(n) ((uint32_t)(n & 0x1f)<<24) // Word N Width
|
|
#define I2S0_RDR0 *(volatile uint32_t *)0x4002F0A0 // SAI Receive Data Register
|
|
#define I2S0_RDR1 *(volatile uint32_t *)0x4002F0A4 // SAI Receive Data Register
|
|
#define I2S0_RFR0 *(volatile uint32_t *)0x4002F0C0 // SAI Receive FIFO Register
|
|
#define I2S0_RFR1 *(volatile uint32_t *)0x4002F0C4 // SAI Receive FIFO Register
|
|
#define I2S_RFR_RFP(n) ((uint32_t)n & 7) // read FIFO pointer
|
|
#define I2S_RFR_WFP(n) ((uint32_t)(n & 7)<<16) // write FIFO pointer
|
|
#define I2S0_RMR *(volatile uint32_t *)0x4002F0E0 // SAI Receive Mask Register
|
|
#define I2S_RMR_RWM(n) ((uint32_t)n & 0xFFFFFFFF)
|
|
#define I2S0_MCR *(volatile uint32_t *)0x4002F100 // SAI MCLK Control Register
|
|
#define I2S_MCR_DUF ((uint32_t)1<<31) // Divider Update Flag
|
|
#define I2S_MCR_MOE ((uint32_t)1<<30) // MCLK Output Enable
|
|
#define I2S_MCR_MICS(n) ((uint32_t)(n & 3)<<24) // MCLK Input Clock Select
|
|
#define I2S0_MDR *(volatile uint32_t *)0x4002F104 // SAI MCLK Divide Register
|
|
#define I2S_MDR_FRACT(n) ((uint32_t)(n & 0xff)<<12) // MCLK Fraction
|
|
#define I2S_MDR_DIVIDE(n) ((uint32_t)(n & 0xfff)) // MCLK Divide
|
|
|
|
// Chapter 47: General-Purpose Input/Output (GPIO)
|
|
#define GPIOA_PDOR *(volatile uint32_t *)0x400FF000 // Port Data Output Register
|
|
#define GPIOA_PSOR *(volatile uint32_t *)0x400FF004 // Port Set Output Register
|
|
#define GPIOA_PCOR *(volatile uint32_t *)0x400FF008 // Port Clear Output Register
|
|
#define GPIOA_PTOR *(volatile uint32_t *)0x400FF00C // Port Toggle Output Register
|
|
#define GPIOA_PDIR *(volatile uint32_t *)0x400FF010 // Port Data Input Register
|
|
#define GPIOA_PDDR *(volatile uint32_t *)0x400FF014 // Port Data Direction Register
|
|
#define GPIOB_PDOR *(volatile uint32_t *)0x400FF040 // Port Data Output Register
|
|
#define GPIOB_PSOR *(volatile uint32_t *)0x400FF044 // Port Set Output Register
|
|
#define GPIOB_PCOR *(volatile uint32_t *)0x400FF048 // Port Clear Output Register
|
|
#define GPIOB_PTOR *(volatile uint32_t *)0x400FF04C // Port Toggle Output Register
|
|
#define GPIOB_PDIR *(volatile uint32_t *)0x400FF050 // Port Data Input Register
|
|
#define GPIOB_PDDR *(volatile uint32_t *)0x400FF054 // Port Data Direction Register
|
|
#define GPIOC_PDOR *(volatile uint32_t *)0x400FF080 // Port Data Output Register
|
|
#define GPIOC_PSOR *(volatile uint32_t *)0x400FF084 // Port Set Output Register
|
|
#define GPIOC_PCOR *(volatile uint32_t *)0x400FF088 // Port Clear Output Register
|
|
#define GPIOC_PTOR *(volatile uint32_t *)0x400FF08C // Port Toggle Output Register
|
|
#define GPIOC_PDIR *(volatile uint32_t *)0x400FF090 // Port Data Input Register
|
|
#define GPIOC_PDDR *(volatile uint32_t *)0x400FF094 // Port Data Direction Register
|
|
#define GPIOD_PDOR *(volatile uint32_t *)0x400FF0C0 // Port Data Output Register
|
|
#define GPIOD_PSOR *(volatile uint32_t *)0x400FF0C4 // Port Set Output Register
|
|
#define GPIOD_PCOR *(volatile uint32_t *)0x400FF0C8 // Port Clear Output Register
|
|
#define GPIOD_PTOR *(volatile uint32_t *)0x400FF0CC // Port Toggle Output Register
|
|
#define GPIOD_PDIR *(volatile uint32_t *)0x400FF0D0 // Port Data Input Register
|
|
#define GPIOD_PDDR *(volatile uint32_t *)0x400FF0D4 // Port Data Direction Register
|
|
#define GPIOE_PDOR *(volatile uint32_t *)0x400FF100 // Port Data Output Register
|
|
#define GPIOE_PSOR *(volatile uint32_t *)0x400FF104 // Port Set Output Register
|
|
#define GPIOE_PCOR *(volatile uint32_t *)0x400FF108 // Port Clear Output Register
|
|
#define GPIOE_PTOR *(volatile uint32_t *)0x400FF10C // Port Toggle Output Register
|
|
#define GPIOE_PDIR *(volatile uint32_t *)0x400FF110 // Port Data Input Register
|
|
#define GPIOE_PDDR *(volatile uint32_t *)0x400FF114 // Port Data Direction Register
|
|
|
|
// Chapter 48: Touch sense input (TSI)
|
|
#define TSI0_GENCS *(volatile uint32_t *)0x40045000 // General Control and Status Register
|
|
#define TSI_GENCS_LPCLKS (uint32_t)0x10000000 //
|
|
#define TSI_GENCS_LPSCNITV(n) (((n) & 15) << 24) //
|
|
#define TSI_GENCS_NSCN(n) (((n) & 31) << 19) //
|
|
#define TSI_GENCS_PS(n) (((n) & 7) << 16) //
|
|
#define TSI_GENCS_EOSF (uint32_t)0x00008000 //
|
|
#define TSI_GENCS_OUTRGF (uint32_t)0x00004000 //
|
|
#define TSI_GENCS_EXTERF (uint32_t)0x00002000 //
|
|
#define TSI_GENCS_OVRF (uint32_t)0x00001000 //
|
|
#define TSI_GENCS_SCNIP (uint32_t)0x00000200 //
|
|
#define TSI_GENCS_SWTS (uint32_t)0x00000100 //
|
|
#define TSI_GENCS_TSIEN (uint32_t)0x00000080 //
|
|
#define TSI_GENCS_TSIIE (uint32_t)0x00000040 //
|
|
#define TSI_GENCS_ERIE (uint32_t)0x00000020 //
|
|
#define TSI_GENCS_ESOR (uint32_t)0x00000010 //
|
|
#define TSI_GENCS_STM (uint32_t)0x00000002 //
|
|
#define TSI_GENCS_STPE (uint32_t)0x00000001 //
|
|
#define TSI0_SCANC *(volatile uint32_t *)0x40045004 // SCAN Control Register
|
|
#define TSI_SCANC_REFCHRG(n) (((n) & 15) << 24) //
|
|
#define TSI_SCANC_EXTCHRG(n) (((n) & 7) << 16) //
|
|
#define TSI_SCANC_SMOD(n) (((n) & 255) << 8) //
|
|
#define TSI_SCANC_AMCLKS(n) (((n) & 3) << 3) //
|
|
#define TSI_SCANC_AMPSC(n) (((n) & 7) << 0) //
|
|
#define TSI0_PEN *(volatile uint32_t *)0x40045008 // Pin Enable Register
|
|
#define TSI0_WUCNTR *(volatile uint32_t *)0x4004500C // Wake-Up Channel Counter Register
|
|
#define TSI0_CNTR1 *(volatile uint32_t *)0x40045100 // Counter Register
|
|
#define TSI0_CNTR3 *(volatile uint32_t *)0x40045104 // Counter Register
|
|
#define TSI0_CNTR5 *(volatile uint32_t *)0x40045108 // Counter Register
|
|
#define TSI0_CNTR7 *(volatile uint32_t *)0x4004510C // Counter Register
|
|
#define TSI0_CNTR9 *(volatile uint32_t *)0x40045110 // Counter Register
|
|
#define TSI0_CNTR11 *(volatile uint32_t *)0x40045114 // Counter Register
|
|
#define TSI0_CNTR13 *(volatile uint32_t *)0x40045118 // Counter Register
|
|
#define TSI0_CNTR15 *(volatile uint32_t *)0x4004511C // Counter Register
|
|
#define TSI0_THRESHOLD *(volatile uint32_t *)0x40045120 // Low Power Channel Threshold Register
|
|
|
|
// Nested Vectored Interrupt Controller, Table 3-4 & ARMv7 ref, appendix B3.4 (page 750)
|
|
#define NVIC_ENABLE_IRQ(n) (*((volatile uint32_t *)0xE000E100 + (n >> 5)) = (1 << (n & 31)))
|
|
#define NVIC_DISABLE_IRQ(n) (*((volatile uint32_t *)0xE000E180 + (n >> 5)) = (1 << (n & 31)))
|
|
#define NVIC_SET_PENDING(n) (*((volatile uint32_t *)0xE000E200 + (n >> 5)) = (1 << (n & 31)))
|
|
#define NVIC_CLEAR_PENDING(n) (*((volatile uint32_t *)0xE000E280 + (n >> 5)) = (1 << (n & 31)))
|
|
|
|
#define NVIC_ISER0 *(volatile uint32_t *)0xE000E100
|
|
#define NVIC_ISER1 *(volatile uint32_t *)0xE000E104
|
|
#define NVIC_ICER0 *(volatile uint32_t *)0xE000E180
|
|
#define NVIC_ICER1 *(volatile uint32_t *)0xE000E184
|
|
|
|
// 0 = highest priority
|
|
// Cortex-M4: 0,16,32,48,64,80,96,112,128,144,160,176,192,208,224,240
|
|
// Cortex-M0: 0,64,128,192
|
|
#define NVIC_SET_PRIORITY(irqnum, priority) (*((volatile uint8_t *)0xE000E400 + (irqnum)) = (uint8_t)(priority))
|
|
#define NVIC_GET_PRIORITY(irqnum) (*((uint8_t *)0xE000E400 + (irqnum)))
|
|
|
|
#if defined(__MK20DX128__)
|
|
#define IRQ_DMA_CH0 0
|
|
#define IRQ_DMA_CH1 1
|
|
#define IRQ_DMA_CH2 2
|
|
#define IRQ_DMA_CH3 3
|
|
#define IRQ_DMA_ERROR 4
|
|
#define IRQ_FTFL_COMPLETE 6
|
|
#define IRQ_FTFL_COLLISION 7
|
|
#define IRQ_LOW_VOLTAGE 8
|
|
#define IRQ_LLWU 9
|
|
#define IRQ_WDOG 10
|
|
#define IRQ_I2C0 11
|
|
#define IRQ_SPI0 12
|
|
#define IRQ_I2S0_TX 13
|
|
#define IRQ_I2S0_RX 14
|
|
#define IRQ_UART0_LON 15
|
|
#define IRQ_UART0_STATUS 16
|
|
#define IRQ_UART0_ERROR 17
|
|
#define IRQ_UART1_STATUS 18
|
|
#define IRQ_UART1_ERROR 19
|
|
#define IRQ_UART2_STATUS 20
|
|
#define IRQ_UART2_ERROR 21
|
|
#define IRQ_ADC0 22
|
|
#define IRQ_CMP0 23
|
|
#define IRQ_CMP1 24
|
|
#define IRQ_FTM0 25
|
|
#define IRQ_FTM1 26
|
|
#define IRQ_CMT 27
|
|
#define IRQ_RTC_ALARM 28
|
|
#define IRQ_RTC_SECOND 29
|
|
#define IRQ_PIT_CH0 30
|
|
#define IRQ_PIT_CH1 31
|
|
#define IRQ_PIT_CH2 32
|
|
#define IRQ_PIT_CH3 33
|
|
#define IRQ_PDB 34
|
|
#define IRQ_USBOTG 35
|
|
#define IRQ_USBDCD 36
|
|
#define IRQ_TSI 37
|
|
#define IRQ_MCG 38
|
|
#define IRQ_LPTMR 39
|
|
#define IRQ_PORTA 40
|
|
#define IRQ_PORTB 41
|
|
#define IRQ_PORTC 42
|
|
#define IRQ_PORTD 43
|
|
#define IRQ_PORTE 44
|
|
#define IRQ_SOFTWARE 45
|
|
#define NVIC_NUM_INTERRUPTS 46
|
|
|
|
#elif defined(__MK20DX256__)
|
|
#define IRQ_DMA_CH0 0
|
|
#define IRQ_DMA_CH1 1
|
|
#define IRQ_DMA_CH2 2
|
|
#define IRQ_DMA_CH3 3
|
|
#define IRQ_DMA_CH4 4
|
|
#define IRQ_DMA_CH5 5
|
|
#define IRQ_DMA_CH6 6
|
|
#define IRQ_DMA_CH7 7
|
|
#define IRQ_DMA_CH8 8
|
|
#define IRQ_DMA_CH9 9
|
|
#define IRQ_DMA_CH10 10
|
|
#define IRQ_DMA_CH11 11
|
|
#define IRQ_DMA_CH12 12
|
|
#define IRQ_DMA_CH13 13
|
|
#define IRQ_DMA_CH14 14
|
|
#define IRQ_DMA_CH15 15
|
|
#define IRQ_DMA_ERROR 16
|
|
#define IRQ_FTFL_COMPLETE 18
|
|
#define IRQ_FTFL_COLLISION 19
|
|
#define IRQ_LOW_VOLTAGE 20
|
|
#define IRQ_LLWU 21
|
|
#define IRQ_WDOG 22
|
|
#define IRQ_I2C0 24
|
|
#define IRQ_I2C1 25
|
|
#define IRQ_SPI0 26
|
|
#define IRQ_SPI1 27
|
|
#define IRQ_CAN_MESSAGE 29
|
|
#define IRQ_CAN_BUS_OFF 30
|
|
#define IRQ_CAN_ERROR 31
|
|
#define IRQ_CAN_TX_WARN 32
|
|
#define IRQ_CAN_RX_WARN 33
|
|
#define IRQ_CAN_WAKEUP 34
|
|
#define IRQ_I2S0_TX 35
|
|
#define IRQ_I2S0_RX 36
|
|
#define IRQ_UART0_LON 44
|
|
#define IRQ_UART0_STATUS 45
|
|
#define IRQ_UART0_ERROR 46
|
|
#define IRQ_UART1_STATUS 47
|
|
#define IRQ_UART1_ERROR 48
|
|
#define IRQ_UART2_STATUS 49
|
|
#define IRQ_UART2_ERROR 50
|
|
#define IRQ_ADC0 57
|
|
#define IRQ_ADC1 58
|
|
#define IRQ_CMP0 59
|
|
#define IRQ_CMP1 60
|
|
#define IRQ_CMP2 61
|
|
#define IRQ_FTM0 62
|
|
#define IRQ_FTM1 63
|
|
#define IRQ_FTM2 64
|
|
#define IRQ_CMT 65
|
|
#define IRQ_RTC_ALARM 66
|
|
#define IRQ_RTC_SECOND 67
|
|
#define IRQ_PIT_CH0 68
|
|
#define IRQ_PIT_CH1 69
|
|
#define IRQ_PIT_CH2 70
|
|
#define IRQ_PIT_CH3 71
|
|
#define IRQ_PDB 72
|
|
#define IRQ_USBOTG 73
|
|
#define IRQ_USBDCD 74
|
|
#define IRQ_DAC0 81
|
|
#define IRQ_TSI 83
|
|
#define IRQ_MCG 84
|
|
#define IRQ_LPTMR 85
|
|
#define IRQ_PORTA 87
|
|
#define IRQ_PORTB 88
|
|
#define IRQ_PORTC 89
|
|
#define IRQ_PORTD 90
|
|
#define IRQ_PORTE 91
|
|
#define IRQ_SOFTWARE 94
|
|
#define NVIC_NUM_INTERRUPTS 95
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
|
|
#define __disable_irq() __asm__ volatile("CPSID i");
|
|
#define __enable_irq() __asm__ volatile("CPSIE i");
|
|
|
|
// System Control Space (SCS), ARMv7 ref manual, B3.2, page 708
|
|
#define SCB_CPUID *(const uint32_t *)0xE000ED00 // CPUID Base Register
|
|
#define SCB_ICSR *(volatile uint32_t *)0xE000ED04 // Interrupt Control and State
|
|
#define SCB_ICSR_PENDSTSET (uint32_t)0x04000000
|
|
#define SCB_VTOR *(volatile uint32_t *)0xE000ED08 // Vector Table Offset
|
|
#define SCB_AIRCR *(volatile uint32_t *)0xE000ED0C // Application Interrupt and Reset Control
|
|
#define SCB_SCR *(volatile uint32_t *)0xE000ED10 // System Control Register
|
|
#define SCB_CCR *(volatile uint32_t *)0xE000ED14 // Configuration and Control
|
|
#define SCB_SHPR1 *(volatile uint32_t *)0xE000ED18 // System Handler Priority Register 1
|
|
#define SCB_SHPR2 *(volatile uint32_t *)0xE000ED1C // System Handler Priority Register 2
|
|
#define SCB_SHPR3 *(volatile uint32_t *)0xE000ED20 // System Handler Priority Register 3
|
|
#define SCB_SHCSR *(volatile uint32_t *)0xE000ED24 // System Handler Control and State
|
|
#define SCB_CFSR *(volatile uint32_t *)0xE000ED28 // Configurable Fault Status Register
|
|
#define SCB_HFSR *(volatile uint32_t *)0xE000ED2C // HardFault Status
|
|
#define SCB_DFSR *(volatile uint32_t *)0xE000ED30 // Debug Fault Status
|
|
#define SCB_MMFAR *(volatile uint32_t *)0xE000ED34 // MemManage Fault Address
|
|
|
|
#define SYST_CSR *(volatile uint32_t *)0xE000E010 // SysTick Control and Status
|
|
#define SYST_CSR_COUNTFLAG (uint32_t)0x00010000
|
|
#define SYST_CSR_CLKSOURCE (uint32_t)0x00000004
|
|
#define SYST_CSR_TICKINT (uint32_t)0x00000002
|
|
#define SYST_CSR_ENABLE (uint32_t)0x00000001
|
|
#define SYST_RVR *(volatile uint32_t *)0xE000E014 // SysTick Reload Value Register
|
|
#define SYST_CVR *(volatile uint32_t *)0xE000E018 // SysTick Current Value Register
|
|
#define SYST_CALIB *(const uint32_t *)0xE000E01C // SysTick Calibration Value
|
|
|
|
|
|
#define ARM_DEMCR *(volatile uint32_t *)0xE000EDFC // Debug Exception and Monitor Control
|
|
#define ARM_DEMCR_TRCENA (1 << 24) // Enable debugging & monitoring blocks
|
|
#define ARM_DWT_CTRL *(volatile uint32_t *)0xE0001000 // DWT control register
|
|
#define ARM_DWT_CTRL_CYCCNTENA (1 << 0) // Enable cycle count
|
|
#define ARM_DWT_CYCCNT *(volatile uint32_t *)0xE0001004 // Cycle count register
|
|
|
|
extern int nvic_execution_priority(void);
|
|
|
|
extern void nmi_isr(void);
|
|
extern void hard_fault_isr(void);
|
|
extern void memmanage_fault_isr(void);
|
|
extern void bus_fault_isr(void);
|
|
extern void usage_fault_isr(void);
|
|
extern void svcall_isr(void);
|
|
extern void debugmonitor_isr(void);
|
|
extern void pendablesrvreq_isr(void);
|
|
extern void systick_isr(void);
|
|
extern void dma_ch0_isr(void);
|
|
extern void dma_ch1_isr(void);
|
|
extern void dma_ch2_isr(void);
|
|
extern void dma_ch3_isr(void);
|
|
extern void dma_ch4_isr(void);
|
|
extern void dma_ch5_isr(void);
|
|
extern void dma_ch6_isr(void);
|
|
extern void dma_ch7_isr(void);
|
|
extern void dma_ch8_isr(void);
|
|
extern void dma_ch9_isr(void);
|
|
extern void dma_ch10_isr(void);
|
|
extern void dma_ch11_isr(void);
|
|
extern void dma_ch12_isr(void);
|
|
extern void dma_ch13_isr(void);
|
|
extern void dma_ch14_isr(void);
|
|
extern void dma_ch15_isr(void);
|
|
extern void dma_error_isr(void);
|
|
extern void mcm_isr(void);
|
|
extern void flash_cmd_isr(void);
|
|
extern void flash_error_isr(void);
|
|
extern void low_voltage_isr(void);
|
|
extern void wakeup_isr(void);
|
|
extern void watchdog_isr(void);
|
|
extern void i2c0_isr(void);
|
|
extern void i2c1_isr(void);
|
|
extern void i2c2_isr(void);
|
|
extern void spi0_isr(void);
|
|
extern void spi1_isr(void);
|
|
extern void spi2_isr(void);
|
|
extern void sdhc_isr(void);
|
|
extern void can0_message_isr(void);
|
|
extern void can0_bus_off_isr(void);
|
|
extern void can0_error_isr(void);
|
|
extern void can0_tx_warn_isr(void);
|
|
extern void can0_rx_warn_isr(void);
|
|
extern void can0_wakeup_isr(void);
|
|
extern void i2s0_tx_isr(void);
|
|
extern void i2s0_rx_isr(void);
|
|
extern void uart0_lon_isr(void);
|
|
extern void uart0_status_isr(void);
|
|
extern void uart0_error_isr(void);
|
|
extern void uart1_status_isr(void);
|
|
extern void uart1_error_isr(void);
|
|
extern void uart2_status_isr(void);
|
|
extern void uart2_error_isr(void);
|
|
extern void uart3_status_isr(void);
|
|
extern void uart3_error_isr(void);
|
|
extern void uart4_status_isr(void);
|
|
extern void uart4_error_isr(void);
|
|
extern void uart5_status_isr(void);
|
|
extern void uart5_error_isr(void);
|
|
extern void adc0_isr(void);
|
|
extern void adc1_isr(void);
|
|
extern void cmp0_isr(void);
|
|
extern void cmp1_isr(void);
|
|
extern void cmp2_isr(void);
|
|
extern void ftm0_isr(void);
|
|
extern void ftm1_isr(void);
|
|
extern void ftm2_isr(void);
|
|
extern void ftm3_isr(void);
|
|
extern void cmt_isr(void);
|
|
extern void rtc_alarm_isr(void);
|
|
extern void rtc_seconds_isr(void);
|
|
extern void pit0_isr(void);
|
|
extern void pit1_isr(void);
|
|
extern void pit2_isr(void);
|
|
extern void pit3_isr(void);
|
|
extern void pdb_isr(void);
|
|
extern void usb_isr(void);
|
|
extern void usb_charge_isr(void);
|
|
extern void dac0_isr(void);
|
|
extern void dac1_isr(void);
|
|
extern void tsi0_isr(void);
|
|
extern void mcg_isr(void);
|
|
extern void lptmr_isr(void);
|
|
extern void porta_isr(void);
|
|
extern void portb_isr(void);
|
|
extern void portc_isr(void);
|
|
extern void portd_isr(void);
|
|
extern void porte_isr(void);
|
|
extern void software_isr(void);
|
|
|
|
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
#endif
|