![Damien George](/assets/img/avatar_default.png)
As part of this, rejig the way TIM3 is initialised, since it's now shared by USB CDC and the blue LED PWM.
375 lines
12 KiB
C
375 lines
12 KiB
C
/**
|
|
******************************************************************************
|
|
* @file USB_Device/CDC_Standalone/Src/usbd_cdc_interface.c
|
|
* @author MCD Application Team
|
|
* @version V1.0.1
|
|
* @date 26-February-2014
|
|
* @brief Source file for USBD CDC interface
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
|
|
*
|
|
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
|
* You may not use this file except in compliance with the License.
|
|
* You may obtain a copy of the License at:
|
|
*
|
|
* http://www.st.com/software_license_agreement_liberty_v2
|
|
*
|
|
* Unless required by applicable law or agreed to in writing, software
|
|
* distributed under the License is distributed on an "AS IS" BASIS,
|
|
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
* See the License for the specific language governing permissions and
|
|
* limitations under the License.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include <stdbool.h>
|
|
#include "stm32f4xx_hal.h"
|
|
#include "usbd_cdc_msc.h"
|
|
#include "usbd_cdc_interface.h"
|
|
#include "pendsv.h"
|
|
#include "usb.h"
|
|
|
|
// CDC control commands
|
|
#define CDC_SEND_ENCAPSULATED_COMMAND 0x00
|
|
#define CDC_GET_ENCAPSULATED_RESPONSE 0x01
|
|
#define CDC_SET_COMM_FEATURE 0x02
|
|
#define CDC_GET_COMM_FEATURE 0x03
|
|
#define CDC_CLEAR_COMM_FEATURE 0x04
|
|
#define CDC_SET_LINE_CODING 0x20
|
|
#define CDC_GET_LINE_CODING 0x21
|
|
#define CDC_SET_CONTROL_LINE_STATE 0x22
|
|
#define CDC_SEND_BREAK 0x23
|
|
|
|
/* Private typedef -----------------------------------------------------------*/
|
|
/* Private define ------------------------------------------------------------*/
|
|
#define APP_RX_DATA_SIZE 1024 // I think this must be at least CDC_DATA_FS_OUT_PACKET_SIZE (was 2048)
|
|
#define APP_TX_DATA_SIZE 1024 // I think this can be any value (was 2048)
|
|
|
|
/* Private macro -------------------------------------------------------------*/
|
|
/* Private variables ---------------------------------------------------------*/
|
|
|
|
static uint8_t dev_is_connected = 0; // indicates if we are connected
|
|
|
|
static uint8_t UserRxBuffer[APP_RX_DATA_SIZE]; // received data from USB OUT endpoint is stored in this buffer
|
|
static uint16_t UserRxBufCur = 0; // points to next available character in UserRxBuffer
|
|
static uint16_t UserRxBufLen = 0; // counts number of valid characters in UserRxBuffer
|
|
|
|
static uint8_t UserTxBuffer[APP_TX_DATA_SIZE]; // data for USB IN endpoind is stored in this buffer
|
|
static uint16_t UserTxBufPtrIn = 0; // increment this pointer modulo APP_TX_DATA_SIZE when new data is available
|
|
static uint16_t UserTxBufPtrOut = 0; // increment this pointer modulo APP_TX_DATA_SIZE when data is drained
|
|
|
|
static int user_interrupt_char = VCP_CHAR_NONE;
|
|
static void *user_interrupt_data = NULL;
|
|
|
|
/* USB handler declaration */
|
|
extern USBD_HandleTypeDef hUSBDDevice;
|
|
|
|
/* Private function prototypes -----------------------------------------------*/
|
|
static int8_t CDC_Itf_Init (void);
|
|
static int8_t CDC_Itf_DeInit (void);
|
|
static int8_t CDC_Itf_Control (uint8_t cmd, uint8_t* pbuf, uint16_t length);
|
|
static int8_t CDC_Itf_Receive (uint8_t* pbuf, uint32_t *Len);
|
|
|
|
const USBD_CDC_ItfTypeDef USBD_CDC_fops = {
|
|
CDC_Itf_Init,
|
|
CDC_Itf_DeInit,
|
|
CDC_Itf_Control,
|
|
CDC_Itf_Receive
|
|
};
|
|
|
|
/* Private functions ---------------------------------------------------------*/
|
|
|
|
/**
|
|
* @brief CDC_Itf_Init
|
|
* Initializes the CDC media low layer
|
|
* @param None
|
|
* @retval Result of the opeartion: USBD_OK if all operations are OK else USBD_FAIL
|
|
*/
|
|
static int8_t CDC_Itf_Init(void)
|
|
{
|
|
#if 0
|
|
/*##-1- Configure the UART peripheral ######################################*/
|
|
/* Put the USART peripheral in the Asynchronous mode (UART Mode) */
|
|
/* USART configured as follow:
|
|
- Word Length = 8 Bits
|
|
- Stop Bit = One Stop bit
|
|
- Parity = No parity
|
|
- BaudRate = 115200 baud
|
|
- Hardware flow control disabled (RTS and CTS signals) */
|
|
UartHandle.Instance = USARTx;
|
|
UartHandle.Init.BaudRate = 115200;
|
|
UartHandle.Init.WordLength = UART_WORDLENGTH_8B;
|
|
UartHandle.Init.StopBits = UART_STOPBITS_1;
|
|
UartHandle.Init.Parity = UART_PARITY_NONE;
|
|
UartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE;
|
|
UartHandle.Init.Mode = UART_MODE_TX_RX;
|
|
|
|
if(HAL_UART_Init(&UartHandle) != HAL_OK)
|
|
{
|
|
/* Initialization Error */
|
|
Error_Handler();
|
|
}
|
|
|
|
/*##-2- Put UART peripheral in IT reception process ########################*/
|
|
/* Any data received will be stored in "UserTxBuffer" buffer */
|
|
if(HAL_UART_Receive_IT(&UartHandle, (uint8_t *)UserTxBuffer, 1) != HAL_OK)
|
|
{
|
|
/* Transfer error in reception process */
|
|
Error_Handler();
|
|
}
|
|
|
|
/*##-3- Configure the TIM Base generation #################################*/
|
|
now done in HAL_MspInit
|
|
TIM_Config();
|
|
#endif
|
|
|
|
/*##-4- Start the TIM Base generation in interrupt mode ####################*/
|
|
/* Start Channel1 */
|
|
__HAL_TIM_ENABLE_IT(&TIM3_Handle, TIM_IT_UPDATE);
|
|
|
|
/*##-5- Set Application Buffers ############################################*/
|
|
USBD_CDC_SetTxBuffer(&hUSBDDevice, UserTxBuffer, 0);
|
|
USBD_CDC_SetRxBuffer(&hUSBDDevice, UserRxBuffer);
|
|
|
|
UserRxBufCur = 0;
|
|
UserRxBufLen = 0;
|
|
|
|
user_interrupt_char = VCP_CHAR_NONE;
|
|
user_interrupt_data = NULL;
|
|
|
|
return (USBD_OK);
|
|
}
|
|
|
|
/**
|
|
* @brief CDC_Itf_DeInit
|
|
* DeInitializes the CDC media low layer
|
|
* @param None
|
|
* @retval Result of the opeartion: USBD_OK if all operations are OK else USBD_FAIL
|
|
*/
|
|
static int8_t CDC_Itf_DeInit(void)
|
|
{
|
|
#if 0
|
|
/* DeInitialize the UART peripheral */
|
|
if(HAL_UART_DeInit(&UartHandle) != HAL_OK)
|
|
{
|
|
/* Initialization Error */
|
|
}
|
|
#endif
|
|
return (USBD_OK);
|
|
}
|
|
|
|
/**
|
|
* @brief CDC_Itf_Control
|
|
* Manage the CDC class requests
|
|
* @param Cmd: Command code
|
|
* @param Buf: Buffer containing command data (request parameters)
|
|
* @param Len: Number of data to be sent (in bytes)
|
|
* @retval Result of the opeartion: USBD_OK if all operations are OK else USBD_FAIL
|
|
*/
|
|
static int8_t CDC_Itf_Control(uint8_t cmd, uint8_t* pbuf, uint16_t length) {
|
|
switch (cmd) {
|
|
case CDC_SEND_ENCAPSULATED_COMMAND:
|
|
/* Add your code here */
|
|
break;
|
|
|
|
case CDC_GET_ENCAPSULATED_RESPONSE:
|
|
/* Add your code here */
|
|
break;
|
|
|
|
case CDC_SET_COMM_FEATURE:
|
|
/* Add your code here */
|
|
break;
|
|
|
|
case CDC_GET_COMM_FEATURE:
|
|
/* Add your code here */
|
|
break;
|
|
|
|
case CDC_CLEAR_COMM_FEATURE:
|
|
/* Add your code here */
|
|
break;
|
|
|
|
case CDC_SET_LINE_CODING:
|
|
#if 0
|
|
LineCoding.bitrate = (uint32_t)(pbuf[0] | (pbuf[1] << 8) |\
|
|
(pbuf[2] << 16) | (pbuf[3] << 24));
|
|
LineCoding.format = pbuf[4];
|
|
LineCoding.paritytype = pbuf[5];
|
|
LineCoding.datatype = pbuf[6];
|
|
/* Set the new configuration */
|
|
#endif
|
|
break;
|
|
|
|
case CDC_GET_LINE_CODING:
|
|
#if 0
|
|
pbuf[0] = (uint8_t)(LineCoding.bitrate);
|
|
pbuf[1] = (uint8_t)(LineCoding.bitrate >> 8);
|
|
pbuf[2] = (uint8_t)(LineCoding.bitrate >> 16);
|
|
pbuf[3] = (uint8_t)(LineCoding.bitrate >> 24);
|
|
pbuf[4] = LineCoding.format;
|
|
pbuf[5] = LineCoding.paritytype;
|
|
pbuf[6] = LineCoding.datatype;
|
|
#endif
|
|
|
|
/* Add your code here */
|
|
pbuf[0] = (uint8_t)(115200);
|
|
pbuf[1] = (uint8_t)(115200 >> 8);
|
|
pbuf[2] = (uint8_t)(115200 >> 16);
|
|
pbuf[3] = (uint8_t)(115200 >> 24);
|
|
pbuf[4] = 0; // stop bits (1)
|
|
pbuf[5] = 0; // parity (none)
|
|
pbuf[6] = 8; // number of bits (8)
|
|
break;
|
|
|
|
case CDC_SET_CONTROL_LINE_STATE:
|
|
dev_is_connected = length & 1; // wValue is passed in Len (bit of a hack)
|
|
break;
|
|
|
|
case CDC_SEND_BREAK:
|
|
/* Add your code here */
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return USBD_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief TIM period elapsed callback
|
|
* @param htim: TIM handle
|
|
* @retval None
|
|
*/
|
|
void USBD_CDC_HAL_TIM_PeriodElapsedCallback(void) {
|
|
uint32_t buffptr;
|
|
uint32_t buffsize;
|
|
|
|
if(UserTxBufPtrOut != UserTxBufPtrIn)
|
|
{
|
|
if(UserTxBufPtrOut > UserTxBufPtrIn) /* rollback */
|
|
{
|
|
buffsize = APP_RX_DATA_SIZE - UserTxBufPtrOut;
|
|
}
|
|
else
|
|
{
|
|
buffsize = UserTxBufPtrIn - UserTxBufPtrOut;
|
|
}
|
|
|
|
buffptr = UserTxBufPtrOut;
|
|
|
|
USBD_CDC_SetTxBuffer(&hUSBDDevice, (uint8_t*)&UserTxBuffer[buffptr], buffsize);
|
|
|
|
if(USBD_CDC_TransmitPacket(&hUSBDDevice) == USBD_OK)
|
|
{
|
|
UserTxBufPtrOut += buffsize;
|
|
if (UserTxBufPtrOut == APP_RX_DATA_SIZE)
|
|
{
|
|
UserTxBufPtrOut = 0;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief CDC_Itf_DataRx
|
|
* Data received over USB OUT endpoint is processed here.
|
|
* @param Buf: Buffer of data received
|
|
* @param Len: Number of data received (in bytes)
|
|
* @retval Result of the opeartion: USBD_OK if all operations are OK else USBD_FAIL
|
|
* @note The buffer we are passed here is just UserRxBuffer, so we are
|
|
* free to modify it.
|
|
*/
|
|
static int8_t CDC_Itf_Receive(uint8_t* Buf, uint32_t *Len) {
|
|
#if 0
|
|
// this sends the data over the UART using DMA
|
|
HAL_UART_Transmit_DMA(&UartHandle, Buf, *Len);
|
|
#endif
|
|
|
|
if (user_interrupt_char == VCP_CHAR_NONE) {
|
|
// no special interrupt character
|
|
UserRxBufLen = *Len;
|
|
|
|
} else {
|
|
// filter out sepcial interrupt character from the buffer
|
|
bool char_found = false;
|
|
uint8_t *dest = Buf;
|
|
uint8_t *src = Buf;
|
|
uint8_t *buf_top = Buf + *Len;
|
|
for (; src < buf_top; src++) {
|
|
if (*src == user_interrupt_char) {
|
|
char_found = true;
|
|
} else {
|
|
if (char_found) {
|
|
*dest = *src;
|
|
}
|
|
dest++;
|
|
}
|
|
}
|
|
|
|
// set length of remaining characters
|
|
UserRxBufLen = dest - Buf;
|
|
|
|
if (char_found) {
|
|
// raise exception when interrupts are finished
|
|
user_interrupt_char = VCP_CHAR_NONE;
|
|
pendsv_nlr_jump(user_interrupt_data);
|
|
}
|
|
}
|
|
|
|
// there are new characters at the start of the buffer, so point there
|
|
UserRxBufCur = 0;
|
|
|
|
if (UserRxBufLen == 0) {
|
|
// initiate next USB packet transfer now that UserRxBuffer has been drained
|
|
USBD_CDC_ReceivePacket(&hUSBDDevice);
|
|
}
|
|
|
|
return (USBD_OK);
|
|
}
|
|
|
|
int USBD_CDC_IsConnected(void) {
|
|
return dev_is_connected;
|
|
}
|
|
|
|
void USBD_CDC_SetInterrupt(int chr, void *data) {
|
|
user_interrupt_char = chr;
|
|
user_interrupt_data = data;
|
|
}
|
|
|
|
void USBD_CDC_Tx(const char *str, uint32_t len) {
|
|
for (int i = 0; i < len; i++) {
|
|
uint timeout = 200;
|
|
while (UserTxBufPtrIn + 1 == UserTxBufPtrOut) {
|
|
if (timeout-- == 0) {
|
|
break;
|
|
}
|
|
HAL_Delay(1);
|
|
}
|
|
UserTxBuffer[UserTxBufPtrIn] = str[i];
|
|
UserTxBufPtrIn = (UserTxBufPtrIn + 1) & (APP_TX_DATA_SIZE - 1);
|
|
}
|
|
}
|
|
|
|
int USBD_CDC_RxNum(void) {
|
|
return UserRxBufLen - UserRxBufCur;
|
|
}
|
|
|
|
int USBD_CDC_RxGet(void) {
|
|
// wait for buffer to have at least 1 character in it
|
|
while (USBD_CDC_RxNum() == 0) {
|
|
__WFI();
|
|
}
|
|
|
|
// get next character
|
|
int c = UserRxBuffer[UserRxBufCur++];
|
|
if (UserRxBufCur >= UserRxBufLen) {
|
|
// initiate next USB packet transfer now that UserRxBuffer has been drained
|
|
USBD_CDC_ReceivePacket(&hUSBDDevice);
|
|
}
|
|
return c;
|
|
}
|