micropython/stm/lib/usb_dcd_int.h

128 lines
3.2 KiB
C

/**
******************************************************************************
* @file usb_dcd_int.h
* @author MCD Application Team
* @version V2.1.0
* @date 19-March-2012
* @brief Peripheral Device Interface Layer
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef USB_DCD_INT_H__
#define USB_DCD_INT_H__
/* Includes ------------------------------------------------------------------*/
#include "usb_dcd.h"
/** @addtogroup USB_OTG_DRIVER
* @{
*/
/** @defgroup USB_DCD_INT
* @brief This file is the
* @{
*/
/** @defgroup USB_DCD_INT_Exported_Defines
* @{
*/
typedef struct _USBD_DCD_INT
{
uint8_t (* DataOutStage) (USB_OTG_CORE_HANDLE *pdev , uint8_t epnum);
uint8_t (* DataInStage) (USB_OTG_CORE_HANDLE *pdev , uint8_t epnum);
uint8_t (* SetupStage) (USB_OTG_CORE_HANDLE *pdev);
uint8_t (* SOF) (USB_OTG_CORE_HANDLE *pdev);
uint8_t (* Reset) (USB_OTG_CORE_HANDLE *pdev);
uint8_t (* Suspend) (USB_OTG_CORE_HANDLE *pdev);
uint8_t (* Resume) (USB_OTG_CORE_HANDLE *pdev);
uint8_t (* IsoINIncomplete) (USB_OTG_CORE_HANDLE *pdev);
uint8_t (* IsoOUTIncomplete) (USB_OTG_CORE_HANDLE *pdev);
uint8_t (* DevConnected) (USB_OTG_CORE_HANDLE *pdev);
uint8_t (* DevDisconnected) (USB_OTG_CORE_HANDLE *pdev);
}USBD_DCD_INT_cb_TypeDef;
extern USBD_DCD_INT_cb_TypeDef *USBD_DCD_INT_fops;
/**
* @}
*/
/** @defgroup USB_DCD_INT_Exported_Types
* @{
*/
/**
* @}
*/
/** @defgroup USB_DCD_INT_Exported_Macros
* @{
*/
#define CLEAR_IN_EP_INTR(epnum,intr) \
diepint.d32=0; \
diepint.b.intr = 1; \
USB_OTG_WRITE_REG32(&pdev->regs.INEP_REGS[epnum]->DIEPINT,diepint.d32);
#define CLEAR_OUT_EP_INTR(epnum,intr) \
doepint.d32=0; \
doepint.b.intr = 1; \
USB_OTG_WRITE_REG32(&pdev->regs.OUTEP_REGS[epnum]->DOEPINT,doepint.d32);
/**
* @}
*/
/** @defgroup USB_DCD_INT_Exported_Variables
* @{
*/
/**
* @}
*/
/** @defgroup USB_DCD_INT_Exported_FunctionsPrototype
* @{
*/
uint32_t USBD_OTG_ISR_Handler (USB_OTG_CORE_HANDLE *pdev);
/**
* @}
*/
#endif // USB_DCD_INT_H__
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/