diff --git a/usbdux/usbduxsigma_firmware.asm b/usbdux/usbduxsigma_firmware.asm index 0bdadc2..38f5f0e 100644 --- a/usbdux/usbduxsigma_firmware.asm +++ b/usbdux/usbduxsigma_firmware.asm @@ -30,17 +30,20 @@ .inc fx2-include.asm -;;; a couple of flags +;;; a couple of flags in high memory .equ CMD_FLAG,80h ; flag for the next in transfer .equ PWMFLAG,81h ; PWM on or off? .equ MAXSMPL,82H ; maximum number of samples, n channellist .equ MUXSG0,83H ; content of the MUXSG0 register - .equ SMPLCTR,84h - .equ DPTRL,85H - .equ DPTRH,86h - .equ ASYNC_ON,87h .equ INTERVAL,88h ; uframe/frame interval .equ INTCTR,89h ; interval counter + .equ DABUFFER,0F0h ; buffer with DA values + +;;; in precious low memory but accessible within one clock cycle + .equ DPTRL,70H + .equ DPTRH,71h + .equ ASYNC_ON,72h + .equ SMPLCTR,73h ;;; actual code .org 0000h ; after reset the processor starts here @@ -229,31 +232,24 @@ isr0: push 06h ; R6 push 07h ; R7 - mov r0,#ASYNC_ON - mov a,@r0 + mov a,ASYNC_ON jz noepsubmit mov DPS,#0 - mov r0,#DPTRL - mov dpl,@r0 - inc r0 - mov dph,@r0 + mov dpl,DPTRL + mov dph,DPTRH lcall readADCch ; read one channel - mov r0,#DPTRL - mov @r0,dpl - inc r0 - mov @r0,dph + mov DPTRL,dpl + mov DPTRH,dph - mov r0,#SMPLCTR - mov a,@r0 + mov a,SMPLCTR dec a - mov @r0,a + mov SMPLCTR,a jnz noepsubmit - mov r0,#ASYNC_ON - mov @r0,#0 + mov ASYNC_ON,#0 clr IOA.7 ; START = 0 @@ -303,9 +299,6 @@ main: mov a,#00000011b ; allows skip lcall syncdelaywr - mov IP,#0 ; all std 8051 int have low priority - mov EIP,#0FFH ; all FX2 interrupts have high priority - mov dptr,#INTSETUP ; IRQ setup register mov a,#08h ; enable autovector lcall syncdelaywr @@ -314,6 +307,9 @@ main: mov a,#0 lcall syncdelaywr + mov IP,#01H ; int0 has highest interrupt priority + mov EIP,#0 ; all USB interrupts have low priority + lcall initAD ; init the ports to the converters lcall initeps ; init the isochronous data-transfer @@ -341,8 +337,10 @@ initAD: mov r0,#MAXSMPL ; length of channellist mov @r0,#0 ; we don't want to accumlate samples - mov r0,#ASYNC_ON ; async enable - mov @r0,#0 ; we don't want to accumlate samples + mov ASYNC_ON,#0 ; async enable + + mov r0,#DABUFFER + mov @r0,#0 mov OEA,#11100000b ; PortA7,A6,A5 Outputs mov IOA,#01100000b ; /CS = 1 and START = 0 @@ -589,8 +587,6 @@ sof_isr: push 06h ; R6 push 07h ; R7 - clr IE.7 ; make sure that no other int's disturbe us - mov r0,#INTCTR ; interval counter mov a,@r0 ; get the value dec a ; decrement @@ -631,18 +627,14 @@ sof_adc: mov a,#0 ; just zero movx @dptr,a ; pad it up inc dptr ; algin along a 32 bit word - mov r0,#DPTRL - mov @r0,dpl - inc r0 - mov @r0,dph + mov DPTRL,dpl + mov DPTRH,dph mov r0,#MAXSMPL mov a,@r0 - mov r0,#SMPLCTR - mov @r0,a + mov SMPLCTR,a - mov r0,#ASYNC_ON - mov @r0,#1 ; enable data collection + mov ASYNC_ON,#1 epfull: ;; do the D/A conversion @@ -658,7 +650,13 @@ epfull: lcall syncdelaywr ; wait for the rec to sync lcall syncdelaywr ; wait for the rec to sync -epempty: +epempty: + mov a,IOA ; conversion running? + jb ACC.7,sofend + + lcall DAsend + +sofend: ;; clear INT2 mov a,EXIF ; FIRST clear the USB (INT2) interrupt request clr acc.4 @@ -669,8 +667,6 @@ epempty: movx @DPTR,a nosof: - setb IE.7 ; re-enable global interrupts - pop 07h pop 06h pop 05h @@ -795,8 +791,6 @@ ep1out_isr: push 06h ; R6 push 07h ; R7 - clr IE.7 ; block other interrupts - mov dptr,#0E780h ; FIFO buffer of EP1OUT movx a,@dptr ; get the first byte mov r0,#CMD_FLAG ; pointer to the command byte @@ -831,8 +825,7 @@ pwm_off: sjmp over_da initsgADchannel: - mov r0,#ASYNC_ON - mov @r0,#0 ; make sure that no async activity is on + mov ASYNC_ON,#0 mov dptr,#0e781h ; FIFO buffer of EP1OUT lcall configADC ; configures the ADC esp sel the channel @@ -869,13 +862,11 @@ startadc2: inc dptr mov r0,#MAXSMPL mov @r0,a ; length of the channel list - mov r0,#SMPLCTR - mov @r0,a + mov SMPLCTR,a lcall configADC ; configures all registers - mov r0,#ASYNC_ON ; async enable - mov @r0,#1 ; enable it + mov ASYNC_ON,#1 ; async enable lcall reset_ep6 ; reset FIFO @@ -958,8 +949,6 @@ over_da: mov a,#00001000b ; clear the ep1outirq movx @DPTR,a - setb IE.7 ; re-enable interrupts - pop 07h pop 06h pop 05h @@ -979,19 +968,45 @@ over_da: -;;; all channels +;;; save all DA channels from the endpoint buffer in a local buffer dalo: movx a,@dptr ; number of bytes to send out inc dptr ; pointer to the first byte + mov r1,#DABUFFER ; buffer for DA values + mov @r1,a ; save it + inc r1 ; inc pointer to local buffer mov r0,a ; counter -nextDA: +nextDAlo: movx a,@dptr ; get the byte inc dptr ; point to the high byte - mov r3,a ; store in r3 for writeDA + mov @r1,a ; save it in the buffer + inc r1 movx a,@dptr ; get the channel number inc dptr ; get ready for the next channel + mov @r1,a ; save it + inc r1 + djnz r0,nextDAlo ; next channel + ret + + +;;; write to the DA converter +DAsend: + mov r1,#DABUFFER ; buffer of the DA values + mov a,@r1 ; get the channel count + jz DAret ; nothing to do + inc r1 ; pointer to the first byte + mov r0,a ; counter +nextDA: + mov a,@r1 ; get the byte + inc r1 ; point to the high byte + mov r3,a ; store in r3 for writeDA + mov a,@r1 ; get the channel number + inc r1 ; get ready for the next channel + push 1 ; is modified in the subroutine lcall writeDA ; write value to the DAC + pop 1 ; get the pointer back djnz r0,nextDA ; next channel +DAret: ret @@ -1014,7 +1029,7 @@ writeDA3: rr a ; shift to the upper to the lower djnz r1,writeDA3 orl a,r2 ; merge with the channel info - clr IOA.6 ; /SYNC of the DA to 0 + clr IOA.6 ; /SYNC (/CS) of the DA to 0 lcall sendSPI ; send it out to the SPI mov a,r3 ; get data again anl a,#00001111b ; get the lower nibble @@ -1024,7 +1039,7 @@ writeDA4: djnz r1,writeDA4 anl a,#11110000b ; make sure that's empty lcall sendSPI - setb IOA.6 ; /SYNC of the DA to 1 + setb IOA.6 ; /SYNC (/CS) of the DA to 1 noDA: ret