Commit Graph

17 Commits (alistair/main)

Author SHA1 Message Date
Michal Kalderon 379551b14e
qed: Add firmware 8.42.2.0
This FW contains several fixes and features, main ones listed below.

- RoCE
        - SRIOV support
        - Fixes in following flows:
                - latency optimization flow for inline WQEs
                - iwarp OOO packed DDPs flow
                - tx-dif workaround calculations flow
                - XRC-SRQ exceed cache num

- iSCSI
        - Fixes:
                - iSCSI TCP out-of-order handling.
                - iscsi retransmit flow

- Fcoe
        - Fixes:
                - upload + cleanup flows

- Eth
        - Support USO for non-tunneled UDP packets

- Debug
        - Better handling of extracting data during traffic

Signed-off-by: Ariel Elior <Ariel.Elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
2020-01-06 16:32:25 -05:00
Rasesh Mody 9e194c7307
qed: Add firmware 8.40.33.0
This patch adds new 8.40.33.0 firmware image for QL4xxxx family of
QLogic adapters. The new firmware consists of fixes and enhancements.

Following changes are part of the new firmware:
 - Fix VF RX queue start by returning error when fail to load VF data
 - Fix big receive buffer initialization for 100G leading hardware
   assertion
 - Fix FW to handle GRE tunnel traffic when non-L2 ethernet protocol is
   enabled
 - Add initial FW support for VF Representors

Signed-off-by: Rasesh Mody <rmody@marvell.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
2019-10-30 07:30:32 -04:00
Mody, Rasesh c7ba355ef9 qed: Add 8.37.7.0 firmware image
This patch adds new 8.37.7.0 firmware image for qed* adpaters with
enhancements and fixes.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
2018-10-26 08:11:56 -04:00
Rahul Verma c2e0d14203 qed: Add firmware 8.37.7.0
This patch add a new qed firmware with fixes and added
support for new features.
- Fix a rare case of device crash with iWARP, iSCSI or FCoE offload.
- Fix GRE tunneled traffic when iWARP offload is enabled.
- Fix RoCE failure in ib_send_bw when using inline data.
- Fix latency optimization flow for inline WQEs.
- BigBear 100G fix

Signed-off-by: Rahul Verma <rahul.verma@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
2018-08-20 08:20:00 -04:00
Rahul Verma 2c4f7c1ec6 qed: Add firmware 8.37.2.0
This patch add a new qed firmware with fixes and added
support for new features.
-Fix aRFS for tunneled traffic without inner IP.
-Fix chip configuration which may fail under heavy traffic conditions.
-Fix iSCSI recovery flow.
-Support receiving any-VNI in VXLAN and GENEVE RX classification.
-Support additional RoCE statistics for error cases.
-Support RoCE T10DIF.

v1->v2:
Added signoff for Ariel Elior.

Signed-off-by: Rahul Verma <rahul.verma@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
2018-05-25 08:05:27 -04:00
Rasesh Mody 397a604e08 qed: Add firmware 8.33.12.0
This patch adds new firmware image for qed* adpaters with fixes
and enhancements.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
2018-05-01 08:17:00 -04:00
Rahul Verma 5c74c957f6 qed: Add firmware 8.33.11.0
This patch add a new qed firmware with fixes and added
support for new features.
-Support VLAN remove action in steering flow.
-Optimized the FW flow and several bug fixes.
-Allow VXLAN steering.
-Supports T10DIF and SRQ.
-Support for port redirection for RDMA bonding

Signed-off-by: Rahul Verma <rahul.verma@cavium.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
2018-03-12 09:26:16 -04:00
Rasesh Mody e5a59b0d61 qed: Add firmwares 8.20.0.0 8.18.9.0 and 8.14.6.0
This patch adds new firmware images for qed* adpaters.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
2018-03-12 08:48:01 -04:00
Rasesh Mody 60ba4da284 qed: Add firmwares 8.30.12.0 and 8.10.9.0
This patch adds new firmware images for qed* adpaters that needs to be
inbox in newer distro releases.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
2018-02-13 13:08:19 -05:00
Rahul Verma 5582ca4caf qed: Add firmware 8.33.1.0
The new qed firmware contains fixes to firmware and added
support for new features,
-Add UFP support and drop action support.
-DCQCN support for unlimited number of QP
-Add IP type to GFT filter profile.
-Added new TCP function counters.
-Support flow ID in aRFS flow.

Signed-off-by: Rahul Verma <rahul.verma@cavium.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2017-11-23 01:05:04 +00:00
Yuval Mintz dd2fa03d6c qed: Add firmware 8.20.0.0
The new QED firmware has 2 main purposes -
First, it contains fixes to various initializations and firmware
logic including:
 - Corrects iSCSI fast retransmit when data digest is enabled.
 - Stop draining packets when receiving several consecutive PFCs.
 - Prevent possible assertion when consecutively opening/closing
   many connections.
 - Prevent possible asserton due to too long BDQ fetch time.

In addition, this firmware contains sufficient infrastructure on which
we'll add iWARP support in our drivers.

Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
2017-05-18 11:12:08 -07:00
Yuval Mintz 695f2d6d82 qed: Add firmware 8.15.3.0
This new firmware for the qed* adapters fixes multiple issues:
 - Prevent accidental drops in Tx-switching between VFs.
 - Corrct VF cleanup for higher VFs.
 - Better handling of RoCE error flows.
 - MR registration/deregistration corrections.
 - Prevent possible HW attention during offloaded TCP teardown.
 - Corrections to iSCSI retransmit flows.

In addition, this firmware is a requirement for supporting the
QL41xxx series of adapters, as it contains the necessary init
and firmware logic for those.

Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
2017-03-09 13:54:24 -05:00
Yuval Mintz 70a3c2adcc qed: Add firmware 8.10.10.0
This new firmware for the qed* adpaters fixes several issues:
 - Better blocking of malicious VFs.
 - After FLR, Tx-switching [internal routing] of packets might
   be incorrect.
 - Deletion of unicast MAC filters would sometime have side-effect
   of corrupting the MAC filters configred for a device.
It also contains fixes for future qed* drivers that *hopefully* would be
sent for review in the near future.

In addition, it would allow driver some new functionality, including:
 - Allowing PF/VF driver compaitibility with old drivers [running
   pre-8.10.5.0 firmware].
 - Better debug facilities.

Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
2016-08-16 11:13:33 -04:00
Yuval Mintz 7db6ab934f qed: Add FW 8.10.5.0
The new QED firmware contains several new additions;
As for bug-fixes, it fixes a couple of issues:
 - Wrong classification of packets in 4-port devices.
 - Anti-spoof interoperability with encapsulated packets.
 - Tx-switching of encapsulated packets.
It also slightly improves Tx performance in several scenarios.

>From the driver's feature-set POV, this firmware would
allow us to add 2 major enhancements in the near future:
 - It would allow us produce a register dump from the device,
   as well as other debug-related information.
 - It should be sufficient for our iscsi driver, which we [hopefully]
   plan to push upstream soon.

Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
2016-05-29 10:16:35 -07:00
Sudarsana Reddy Kalluru 73b07a93ed qed: Add firmware 8.7.3.0.
This patch pushes the next firmware for the QED module.
This fixes numerous bugs, most notably:
  - FLR flow isn't properly working.
  - Chip might become unrespronsive after closing a vport.
  - Chip gets stuck when transmitting packet with length > mtu.

It would also allow us to push future features such as:
  - Vlan filter offload.
  - Encapsulation offload.
  - Single Root IOV support.
  - Timesync.
  - Non-L2 protocols.

>From L2 perspecitve, it's also note-worthy to state that it:
  - Changes fastpath HSI - fastpath will be moved to into using
    Jumbo-over-BD.
  - Improves throughput on single connection traffic.

Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
2016-01-10 12:11:00 -08:00
Kyle McMartin bb818e5317 fix permissions on qed_init_values_zipped-8.4.2.0.bin 2015-11-20 11:38:20 -05:00
Sudarsana Kalluru 9d0546a9fe qed: Add FW 8.4.2.0.
This adds the first FW entry to the newly added
Qlogic Ethernet Driver product series.

Signed-off-by: Sudarsana Kalluru <Sudarsana.Kalluru@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
2015-11-11 16:18:29 -08:00