FW & NVS Support wl127x wireless LAN driver (wl1271 & wl1273).
In order to use those files copy them to target FS at /lib/firmware/.
Signed-off-by: Shahar Levi <shahar_levi@ti.com>
Tested-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
This adds version 1.5 of the firmware for i2400m based devices (Intel
Wireless WiMAX Connection 5x50) and adds support for the 6x50
series.
The 1.3 version is purged as it is was never supported by a released kernel.
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Supports BCM4313, BCM43224, and BCM43225 chips.
Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Add firmware for the Exar X3100 10Gbps aadapters
Signed-off-by: Jon Mason <jon.mason@exar.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Add firmware for AR7010 chipsets supported
by the ath9k_htc driver.
More information at: http://wireless.kernel.org/en/users/Drivers/ath9k_htc
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Originally submitted by Ameen Rahman <ameen.rahman@qlogic.com>.
I've only converted the license file from DOS line endings to with unix
line endings, and adjusted it to fit in 80 columns.
Signed-off-by: dann frazier <dannf@hp.com>
Acked-by: Ameen Rahman <ameen.rahman@qlogic.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Extract the microcode for the QLogic QLE7220 series IB HCA and use the
kernel microcode request facility to load the microcode. This
supports Debian Linux's requirements to separate microcode which
doesn't have open source code available from the device driver.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Firmware for Intel 6000 Series Wi-Fi Adapters is version 9.193.4.1
Changelog:
- Sync with fixes from factory
- Fix CTKILL issue after resume
- Fix TC error resulting in NMI On 8KiB AMSDU frames required at
least 4KiB free space
- Fix for 6000 series cards with EEPROM
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Switch to the new firmware version (5.2.13).
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
License is redistributable but no RE or modification.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Drivers are currently specified by a mixture of module name, config
option or description, which is not that useful.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Filenames should be the names of the installed binary files, without
the base directory 'firmware'.
Remove mention of absent file 'whiteheat_loader_debug.fw'.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
pcnet_cs,serial_cs:
add cis of KTI PE520 pcmcia network card,
and serial card(Sierra Wireless AC860).
Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
This comes directly from RealTek in their driver package provided
on their web site to be downloaded.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Conflicts:
drivers/net/usb/cdc_ether.c
All CDC ethernet devices of type USB_CLASS_COMM need to use
'&mbm_info'.
Signed-off-by: David S. Miller <davem@davemloft.net>
Conflicts:
drivers/net/usb/cdc_ether.c
All CDC ethernet devices of type USB_CLASS_COMM need to use
'&mbm_info'.
Signed-off-by: David S. Miller <davem@davemloft.net>
pcnet_cs,serial_cs:
add cis of PreMax ethernet pcmcia card,
and some Sierra Wireless serial card(AC555, AC7xx, AC8xx).
use PROD_ID for AC7xx, because MANF_ID of AC7xx and AC8xx are the same.
Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
pcnet_cs,serial_cs:
add cis of PreMax ethernet pcmcia card,
and some Sierra Wireless serial card(AC555, AC7xx, AC8xx).
use PROD_ID for AC7xx, because MANF_ID of AC7xx and AC8xx are the same.
Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
Value of zero was used to disable the fairness mechanism. Though the code
(driver and FW) allowed changing the value at run time, it did not allow to do
that if the mechanism was disabled to begin with.
Fixed the FW to allow turning on and off the mechanism at run time. Fixed the
code to read the value from the chip at the right sequence.
Without this fix, if the initial value was set to zero, traffic could not run on
the interface.
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Value of zero was used to disable the fairness mechanism. Though the code
(driver and FW) allowed changing the value at run time, it did not allow to do
that if the mechanism was disabled to begin with.
Fixed the FW to allow turning on and off the mechanism at run time. Fixed the
code to read the value from the chip at the right sequence.
Without this fix, if the initial value was set to zero, traffic could not run on
the interface.
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thanks to Patrick Boettcher <pboettcher@dibcom.fr> from DiBcom for
providing the firmware under a redistributable license.
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
pcnet_cs,serial_cs:
add cis of National Semicondoctor's lan&modem mulitifunction pcmcia card,
NE2K, tamarack ethernet card,
and some serial card(COMpad2, COMpad4).
Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
pcnet_cs,serial_cs:
add cis of National Semicondoctor's lan&modem mulitifunction pcmcia card,
NE2K, tamarack ethernet card,
and some serial card(COMpad2, COMpad4).
Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (133 commits)
drm/vgaarb: add VGA arbitration support to the drm and kms.
drm/radeon: some r420s have a CP race with the DMA engine.
drm/radeon/r600/kms: rv670 is not DCE3
drm/radeon/kms: r420 idle after programming GA_ENHANCE
drm/radeon/kms: more fixes to rv770 suspend/resume path.
drm/radeon/kms: more alignment for rv770.c with r600.c
drm/radeon/kms: rv770 blit init called too late.
drm/radeon/kms: move around new init path code to avoid posting at init
drm/radeon/r600: fix some issues with suspend/resume.
drm/radeon/kms: disable VGA rendering engine before taking over VRAM
drm/radeon/kms: Move radeon_get_clock_info() call out of radeon_clocks_init().
drm/radeon/kms: add initial connector properties
drm/radeon/kms: Use surfaces for scanout / cursor byte swapping on big endian.
drm/radeon/kms: don't fail if we fail to init GPU acceleration
drm/r600/kms: fixup number of loops per blit calculation.
drm/radeon/kms: reprogram format in set base.
drm/radeon: avivo chips have no separate int bit for display
drm/radeon/r600: don't do interrupts
drm: fix _DRM_GEM addmap error message
drm: update crtc x/y when only fb changes
...
Fixed up trivial conflicts in firmware/Makefile due to network driver
(cxgb3) and drm (mga/r128/radeon) firmware being listed next to each
other.
Larry Finger