1
0
Fork 0
alistair23-linux/drivers/s390/crypto/vfio_ap_drv.c

215 lines
4.8 KiB
C
Raw Permalink Normal View History

s390: vfio-ap: base implementation of VFIO AP device driver Introduces a new AP device driver. This device driver is built on the VFIO mediated device framework. The framework provides sysfs interfaces that facilitate passthrough access by guests to devices installed on the linux host. The VFIO AP device driver will serve two purposes: 1. Provide the interfaces to reserve AP devices for exclusive use by KVM guests. This is accomplished by unbinding the devices to be reserved for guest usage from the zcrypt device driver and binding them to the VFIO AP device driver. 2. Implements the functions, callbacks and sysfs attribute interfaces required to create one or more VFIO mediated devices each of which will be used to configure the AP matrix for a guest and serve as a file descriptor for facilitating communication between QEMU and the VFIO AP device driver. When the VFIO AP device driver is initialized: * It registers with the AP bus for control of type 10 (CEX4 and newer) AP queue devices. This limitation was imposed due to: 1. A desire to keep the code as simple as possible; 2. Some older models are no longer supported by the kernel and others are getting close to end of service. 3. A lack of older systems on which to test older devices. The probe and remove callbacks will be provided to support the binding/unbinding of AP queue devices to/from the VFIO AP device driver. * Creates a matrix device, /sys/devices/vfio_ap/matrix, to serve as the parent of the mediated devices created, one for each guest, and to hold the APQNs of the AP devices bound to the VFIO AP device driver. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-5-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 17:16:19 -06:00
// SPDX-License-Identifier: GPL-2.0+
/*
* VFIO based AP device driver
*
* Copyright IBM Corp. 2018
*
* Author(s): Tony Krowiak <akrowiak@linux.ibm.com>
* Pierre Morel <pmorel@linux.ibm.com>
s390: vfio-ap: base implementation of VFIO AP device driver Introduces a new AP device driver. This device driver is built on the VFIO mediated device framework. The framework provides sysfs interfaces that facilitate passthrough access by guests to devices installed on the linux host. The VFIO AP device driver will serve two purposes: 1. Provide the interfaces to reserve AP devices for exclusive use by KVM guests. This is accomplished by unbinding the devices to be reserved for guest usage from the zcrypt device driver and binding them to the VFIO AP device driver. 2. Implements the functions, callbacks and sysfs attribute interfaces required to create one or more VFIO mediated devices each of which will be used to configure the AP matrix for a guest and serve as a file descriptor for facilitating communication between QEMU and the VFIO AP device driver. When the VFIO AP device driver is initialized: * It registers with the AP bus for control of type 10 (CEX4 and newer) AP queue devices. This limitation was imposed due to: 1. A desire to keep the code as simple as possible; 2. Some older models are no longer supported by the kernel and others are getting close to end of service. 3. A lack of older systems on which to test older devices. The probe and remove callbacks will be provided to support the binding/unbinding of AP queue devices to/from the VFIO AP device driver. * Creates a matrix device, /sys/devices/vfio_ap/matrix, to serve as the parent of the mediated devices created, one for each guest, and to hold the APQNs of the AP devices bound to the VFIO AP device driver. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-5-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 17:16:19 -06:00
*/
#include <linux/module.h>
#include <linux/mod_devicetable.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <asm/facility.h>
s390: vfio-ap: base implementation of VFIO AP device driver Introduces a new AP device driver. This device driver is built on the VFIO mediated device framework. The framework provides sysfs interfaces that facilitate passthrough access by guests to devices installed on the linux host. The VFIO AP device driver will serve two purposes: 1. Provide the interfaces to reserve AP devices for exclusive use by KVM guests. This is accomplished by unbinding the devices to be reserved for guest usage from the zcrypt device driver and binding them to the VFIO AP device driver. 2. Implements the functions, callbacks and sysfs attribute interfaces required to create one or more VFIO mediated devices each of which will be used to configure the AP matrix for a guest and serve as a file descriptor for facilitating communication between QEMU and the VFIO AP device driver. When the VFIO AP device driver is initialized: * It registers with the AP bus for control of type 10 (CEX4 and newer) AP queue devices. This limitation was imposed due to: 1. A desire to keep the code as simple as possible; 2. Some older models are no longer supported by the kernel and others are getting close to end of service. 3. A lack of older systems on which to test older devices. The probe and remove callbacks will be provided to support the binding/unbinding of AP queue devices to/from the VFIO AP device driver. * Creates a matrix device, /sys/devices/vfio_ap/matrix, to serve as the parent of the mediated devices created, one for each guest, and to hold the APQNs of the AP devices bound to the VFIO AP device driver. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-5-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 17:16:19 -06:00
#include "vfio_ap_private.h"
#define VFIO_AP_ROOT_NAME "vfio_ap"
#define VFIO_AP_DEV_NAME "matrix"
MODULE_AUTHOR("IBM Corporation");
MODULE_DESCRIPTION("VFIO AP device driver, Copyright IBM Corp. 2018");
MODULE_LICENSE("GPL v2");
static struct ap_driver vfio_ap_drv;
struct ap_matrix_dev *matrix_dev;
/* Only type 10 adapters (CEX4 and later) are supported
* by the AP matrix device driver
*/
static struct ap_device_id ap_queue_ids[] = {
{ .dev_type = AP_DEVICE_TYPE_CEX4,
.match_flags = AP_DEVICE_ID_MATCH_QUEUE_TYPE },
{ .dev_type = AP_DEVICE_TYPE_CEX5,
.match_flags = AP_DEVICE_ID_MATCH_QUEUE_TYPE },
{ .dev_type = AP_DEVICE_TYPE_CEX6,
.match_flags = AP_DEVICE_ID_MATCH_QUEUE_TYPE },
{ .dev_type = AP_DEVICE_TYPE_CEX7,
.match_flags = AP_DEVICE_ID_MATCH_QUEUE_TYPE },
s390: vfio-ap: base implementation of VFIO AP device driver Introduces a new AP device driver. This device driver is built on the VFIO mediated device framework. The framework provides sysfs interfaces that facilitate passthrough access by guests to devices installed on the linux host. The VFIO AP device driver will serve two purposes: 1. Provide the interfaces to reserve AP devices for exclusive use by KVM guests. This is accomplished by unbinding the devices to be reserved for guest usage from the zcrypt device driver and binding them to the VFIO AP device driver. 2. Implements the functions, callbacks and sysfs attribute interfaces required to create one or more VFIO mediated devices each of which will be used to configure the AP matrix for a guest and serve as a file descriptor for facilitating communication between QEMU and the VFIO AP device driver. When the VFIO AP device driver is initialized: * It registers with the AP bus for control of type 10 (CEX4 and newer) AP queue devices. This limitation was imposed due to: 1. A desire to keep the code as simple as possible; 2. Some older models are no longer supported by the kernel and others are getting close to end of service. 3. A lack of older systems on which to test older devices. The probe and remove callbacks will be provided to support the binding/unbinding of AP queue devices to/from the VFIO AP device driver. * Creates a matrix device, /sys/devices/vfio_ap/matrix, to serve as the parent of the mediated devices created, one for each guest, and to hold the APQNs of the AP devices bound to the VFIO AP device driver. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-5-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 17:16:19 -06:00
{ /* end of sibling */ },
};
MODULE_DEVICE_TABLE(vfio_ap, ap_queue_ids);
/**
* vfio_ap_queue_dev_probe:
*
* Allocate a vfio_ap_queue structure and associate it
* with the device as driver_data.
*/
s390: vfio-ap: base implementation of VFIO AP device driver Introduces a new AP device driver. This device driver is built on the VFIO mediated device framework. The framework provides sysfs interfaces that facilitate passthrough access by guests to devices installed on the linux host. The VFIO AP device driver will serve two purposes: 1. Provide the interfaces to reserve AP devices for exclusive use by KVM guests. This is accomplished by unbinding the devices to be reserved for guest usage from the zcrypt device driver and binding them to the VFIO AP device driver. 2. Implements the functions, callbacks and sysfs attribute interfaces required to create one or more VFIO mediated devices each of which will be used to configure the AP matrix for a guest and serve as a file descriptor for facilitating communication between QEMU and the VFIO AP device driver. When the VFIO AP device driver is initialized: * It registers with the AP bus for control of type 10 (CEX4 and newer) AP queue devices. This limitation was imposed due to: 1. A desire to keep the code as simple as possible; 2. Some older models are no longer supported by the kernel and others are getting close to end of service. 3. A lack of older systems on which to test older devices. The probe and remove callbacks will be provided to support the binding/unbinding of AP queue devices to/from the VFIO AP device driver. * Creates a matrix device, /sys/devices/vfio_ap/matrix, to serve as the parent of the mediated devices created, one for each guest, and to hold the APQNs of the AP devices bound to the VFIO AP device driver. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-5-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 17:16:19 -06:00
static int vfio_ap_queue_dev_probe(struct ap_device *apdev)
{
struct vfio_ap_queue *q;
q = kzalloc(sizeof(*q), GFP_KERNEL);
if (!q)
return -ENOMEM;
dev_set_drvdata(&apdev->device, q);
q->apqn = to_ap_queue(&apdev->device)->qid;
q->saved_isc = VFIO_AP_ISC_INVALID;
s390: vfio-ap: base implementation of VFIO AP device driver Introduces a new AP device driver. This device driver is built on the VFIO mediated device framework. The framework provides sysfs interfaces that facilitate passthrough access by guests to devices installed on the linux host. The VFIO AP device driver will serve two purposes: 1. Provide the interfaces to reserve AP devices for exclusive use by KVM guests. This is accomplished by unbinding the devices to be reserved for guest usage from the zcrypt device driver and binding them to the VFIO AP device driver. 2. Implements the functions, callbacks and sysfs attribute interfaces required to create one or more VFIO mediated devices each of which will be used to configure the AP matrix for a guest and serve as a file descriptor for facilitating communication between QEMU and the VFIO AP device driver. When the VFIO AP device driver is initialized: * It registers with the AP bus for control of type 10 (CEX4 and newer) AP queue devices. This limitation was imposed due to: 1. A desire to keep the code as simple as possible; 2. Some older models are no longer supported by the kernel and others are getting close to end of service. 3. A lack of older systems on which to test older devices. The probe and remove callbacks will be provided to support the binding/unbinding of AP queue devices to/from the VFIO AP device driver. * Creates a matrix device, /sys/devices/vfio_ap/matrix, to serve as the parent of the mediated devices created, one for each guest, and to hold the APQNs of the AP devices bound to the VFIO AP device driver. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-5-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 17:16:19 -06:00
return 0;
}
/**
* vfio_ap_queue_dev_remove:
*
* Takes the matrix lock to avoid actions on this device while removing
* Free the associated vfio_ap_queue structure
*/
s390: vfio-ap: base implementation of VFIO AP device driver Introduces a new AP device driver. This device driver is built on the VFIO mediated device framework. The framework provides sysfs interfaces that facilitate passthrough access by guests to devices installed on the linux host. The VFIO AP device driver will serve two purposes: 1. Provide the interfaces to reserve AP devices for exclusive use by KVM guests. This is accomplished by unbinding the devices to be reserved for guest usage from the zcrypt device driver and binding them to the VFIO AP device driver. 2. Implements the functions, callbacks and sysfs attribute interfaces required to create one or more VFIO mediated devices each of which will be used to configure the AP matrix for a guest and serve as a file descriptor for facilitating communication between QEMU and the VFIO AP device driver. When the VFIO AP device driver is initialized: * It registers with the AP bus for control of type 10 (CEX4 and newer) AP queue devices. This limitation was imposed due to: 1. A desire to keep the code as simple as possible; 2. Some older models are no longer supported by the kernel and others are getting close to end of service. 3. A lack of older systems on which to test older devices. The probe and remove callbacks will be provided to support the binding/unbinding of AP queue devices to/from the VFIO AP device driver. * Creates a matrix device, /sys/devices/vfio_ap/matrix, to serve as the parent of the mediated devices created, one for each guest, and to hold the APQNs of the AP devices bound to the VFIO AP device driver. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-5-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 17:16:19 -06:00
static void vfio_ap_queue_dev_remove(struct ap_device *apdev)
{
struct vfio_ap_queue *q;
mutex_lock(&matrix_dev->lock);
q = dev_get_drvdata(&apdev->device);
vfio_ap_mdev_reset_queue(q, 1);
dev_set_drvdata(&apdev->device, NULL);
kfree(q);
mutex_unlock(&matrix_dev->lock);
s390: vfio-ap: base implementation of VFIO AP device driver Introduces a new AP device driver. This device driver is built on the VFIO mediated device framework. The framework provides sysfs interfaces that facilitate passthrough access by guests to devices installed on the linux host. The VFIO AP device driver will serve two purposes: 1. Provide the interfaces to reserve AP devices for exclusive use by KVM guests. This is accomplished by unbinding the devices to be reserved for guest usage from the zcrypt device driver and binding them to the VFIO AP device driver. 2. Implements the functions, callbacks and sysfs attribute interfaces required to create one or more VFIO mediated devices each of which will be used to configure the AP matrix for a guest and serve as a file descriptor for facilitating communication between QEMU and the VFIO AP device driver. When the VFIO AP device driver is initialized: * It registers with the AP bus for control of type 10 (CEX4 and newer) AP queue devices. This limitation was imposed due to: 1. A desire to keep the code as simple as possible; 2. Some older models are no longer supported by the kernel and others are getting close to end of service. 3. A lack of older systems on which to test older devices. The probe and remove callbacks will be provided to support the binding/unbinding of AP queue devices to/from the VFIO AP device driver. * Creates a matrix device, /sys/devices/vfio_ap/matrix, to serve as the parent of the mediated devices created, one for each guest, and to hold the APQNs of the AP devices bound to the VFIO AP device driver. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-5-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 17:16:19 -06:00
}
static void vfio_ap_matrix_dev_release(struct device *dev)
{
struct ap_matrix_dev *matrix_dev = dev_get_drvdata(dev);
kfree(matrix_dev);
}
static int matrix_bus_match(struct device *dev, struct device_driver *drv)
{
return 1;
}
static struct bus_type matrix_bus = {
.name = "matrix",
.match = &matrix_bus_match,
};
static struct device_driver matrix_driver = {
.name = "vfio_ap",
.bus = &matrix_bus,
.suppress_bind_attrs = true,
};
s390: vfio-ap: base implementation of VFIO AP device driver Introduces a new AP device driver. This device driver is built on the VFIO mediated device framework. The framework provides sysfs interfaces that facilitate passthrough access by guests to devices installed on the linux host. The VFIO AP device driver will serve two purposes: 1. Provide the interfaces to reserve AP devices for exclusive use by KVM guests. This is accomplished by unbinding the devices to be reserved for guest usage from the zcrypt device driver and binding them to the VFIO AP device driver. 2. Implements the functions, callbacks and sysfs attribute interfaces required to create one or more VFIO mediated devices each of which will be used to configure the AP matrix for a guest and serve as a file descriptor for facilitating communication between QEMU and the VFIO AP device driver. When the VFIO AP device driver is initialized: * It registers with the AP bus for control of type 10 (CEX4 and newer) AP queue devices. This limitation was imposed due to: 1. A desire to keep the code as simple as possible; 2. Some older models are no longer supported by the kernel and others are getting close to end of service. 3. A lack of older systems on which to test older devices. The probe and remove callbacks will be provided to support the binding/unbinding of AP queue devices to/from the VFIO AP device driver. * Creates a matrix device, /sys/devices/vfio_ap/matrix, to serve as the parent of the mediated devices created, one for each guest, and to hold the APQNs of the AP devices bound to the VFIO AP device driver. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-5-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 17:16:19 -06:00
static int vfio_ap_matrix_dev_create(void)
{
int ret;
struct device *root_device;
root_device = root_device_register(VFIO_AP_ROOT_NAME);
if (IS_ERR(root_device))
return PTR_ERR(root_device);
ret = bus_register(&matrix_bus);
if (ret)
goto bus_register_err;
s390: vfio-ap: base implementation of VFIO AP device driver Introduces a new AP device driver. This device driver is built on the VFIO mediated device framework. The framework provides sysfs interfaces that facilitate passthrough access by guests to devices installed on the linux host. The VFIO AP device driver will serve two purposes: 1. Provide the interfaces to reserve AP devices for exclusive use by KVM guests. This is accomplished by unbinding the devices to be reserved for guest usage from the zcrypt device driver and binding them to the VFIO AP device driver. 2. Implements the functions, callbacks and sysfs attribute interfaces required to create one or more VFIO mediated devices each of which will be used to configure the AP matrix for a guest and serve as a file descriptor for facilitating communication between QEMU and the VFIO AP device driver. When the VFIO AP device driver is initialized: * It registers with the AP bus for control of type 10 (CEX4 and newer) AP queue devices. This limitation was imposed due to: 1. A desire to keep the code as simple as possible; 2. Some older models are no longer supported by the kernel and others are getting close to end of service. 3. A lack of older systems on which to test older devices. The probe and remove callbacks will be provided to support the binding/unbinding of AP queue devices to/from the VFIO AP device driver. * Creates a matrix device, /sys/devices/vfio_ap/matrix, to serve as the parent of the mediated devices created, one for each guest, and to hold the APQNs of the AP devices bound to the VFIO AP device driver. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-5-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 17:16:19 -06:00
matrix_dev = kzalloc(sizeof(*matrix_dev), GFP_KERNEL);
if (!matrix_dev) {
ret = -ENOMEM;
goto matrix_alloc_err;
}
2018-09-25 17:16:20 -06:00
/* Fill in config info via PQAP(QCI), if available */
if (test_facility(12)) {
ret = ap_qci(&matrix_dev->info);
if (ret)
goto matrix_alloc_err;
}
mutex_init(&matrix_dev->lock);
INIT_LIST_HEAD(&matrix_dev->mdev_list);
s390: vfio-ap: base implementation of VFIO AP device driver Introduces a new AP device driver. This device driver is built on the VFIO mediated device framework. The framework provides sysfs interfaces that facilitate passthrough access by guests to devices installed on the linux host. The VFIO AP device driver will serve two purposes: 1. Provide the interfaces to reserve AP devices for exclusive use by KVM guests. This is accomplished by unbinding the devices to be reserved for guest usage from the zcrypt device driver and binding them to the VFIO AP device driver. 2. Implements the functions, callbacks and sysfs attribute interfaces required to create one or more VFIO mediated devices each of which will be used to configure the AP matrix for a guest and serve as a file descriptor for facilitating communication between QEMU and the VFIO AP device driver. When the VFIO AP device driver is initialized: * It registers with the AP bus for control of type 10 (CEX4 and newer) AP queue devices. This limitation was imposed due to: 1. A desire to keep the code as simple as possible; 2. Some older models are no longer supported by the kernel and others are getting close to end of service. 3. A lack of older systems on which to test older devices. The probe and remove callbacks will be provided to support the binding/unbinding of AP queue devices to/from the VFIO AP device driver. * Creates a matrix device, /sys/devices/vfio_ap/matrix, to serve as the parent of the mediated devices created, one for each guest, and to hold the APQNs of the AP devices bound to the VFIO AP device driver. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-5-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 17:16:19 -06:00
dev_set_name(&matrix_dev->device, "%s", VFIO_AP_DEV_NAME);
matrix_dev->device.parent = root_device;
matrix_dev->device.bus = &matrix_bus;
s390: vfio-ap: base implementation of VFIO AP device driver Introduces a new AP device driver. This device driver is built on the VFIO mediated device framework. The framework provides sysfs interfaces that facilitate passthrough access by guests to devices installed on the linux host. The VFIO AP device driver will serve two purposes: 1. Provide the interfaces to reserve AP devices for exclusive use by KVM guests. This is accomplished by unbinding the devices to be reserved for guest usage from the zcrypt device driver and binding them to the VFIO AP device driver. 2. Implements the functions, callbacks and sysfs attribute interfaces required to create one or more VFIO mediated devices each of which will be used to configure the AP matrix for a guest and serve as a file descriptor for facilitating communication between QEMU and the VFIO AP device driver. When the VFIO AP device driver is initialized: * It registers with the AP bus for control of type 10 (CEX4 and newer) AP queue devices. This limitation was imposed due to: 1. A desire to keep the code as simple as possible; 2. Some older models are no longer supported by the kernel and others are getting close to end of service. 3. A lack of older systems on which to test older devices. The probe and remove callbacks will be provided to support the binding/unbinding of AP queue devices to/from the VFIO AP device driver. * Creates a matrix device, /sys/devices/vfio_ap/matrix, to serve as the parent of the mediated devices created, one for each guest, and to hold the APQNs of the AP devices bound to the VFIO AP device driver. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-5-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 17:16:19 -06:00
matrix_dev->device.release = vfio_ap_matrix_dev_release;
matrix_dev->vfio_ap_drv = &vfio_ap_drv;
s390: vfio-ap: base implementation of VFIO AP device driver Introduces a new AP device driver. This device driver is built on the VFIO mediated device framework. The framework provides sysfs interfaces that facilitate passthrough access by guests to devices installed on the linux host. The VFIO AP device driver will serve two purposes: 1. Provide the interfaces to reserve AP devices for exclusive use by KVM guests. This is accomplished by unbinding the devices to be reserved for guest usage from the zcrypt device driver and binding them to the VFIO AP device driver. 2. Implements the functions, callbacks and sysfs attribute interfaces required to create one or more VFIO mediated devices each of which will be used to configure the AP matrix for a guest and serve as a file descriptor for facilitating communication between QEMU and the VFIO AP device driver. When the VFIO AP device driver is initialized: * It registers with the AP bus for control of type 10 (CEX4 and newer) AP queue devices. This limitation was imposed due to: 1. A desire to keep the code as simple as possible; 2. Some older models are no longer supported by the kernel and others are getting close to end of service. 3. A lack of older systems on which to test older devices. The probe and remove callbacks will be provided to support the binding/unbinding of AP queue devices to/from the VFIO AP device driver. * Creates a matrix device, /sys/devices/vfio_ap/matrix, to serve as the parent of the mediated devices created, one for each guest, and to hold the APQNs of the AP devices bound to the VFIO AP device driver. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-5-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 17:16:19 -06:00
ret = device_register(&matrix_dev->device);
if (ret)
goto matrix_reg_err;
ret = driver_register(&matrix_driver);
if (ret)
goto matrix_drv_err;
s390: vfio-ap: base implementation of VFIO AP device driver Introduces a new AP device driver. This device driver is built on the VFIO mediated device framework. The framework provides sysfs interfaces that facilitate passthrough access by guests to devices installed on the linux host. The VFIO AP device driver will serve two purposes: 1. Provide the interfaces to reserve AP devices for exclusive use by KVM guests. This is accomplished by unbinding the devices to be reserved for guest usage from the zcrypt device driver and binding them to the VFIO AP device driver. 2. Implements the functions, callbacks and sysfs attribute interfaces required to create one or more VFIO mediated devices each of which will be used to configure the AP matrix for a guest and serve as a file descriptor for facilitating communication between QEMU and the VFIO AP device driver. When the VFIO AP device driver is initialized: * It registers with the AP bus for control of type 10 (CEX4 and newer) AP queue devices. This limitation was imposed due to: 1. A desire to keep the code as simple as possible; 2. Some older models are no longer supported by the kernel and others are getting close to end of service. 3. A lack of older systems on which to test older devices. The probe and remove callbacks will be provided to support the binding/unbinding of AP queue devices to/from the VFIO AP device driver. * Creates a matrix device, /sys/devices/vfio_ap/matrix, to serve as the parent of the mediated devices created, one for each guest, and to hold the APQNs of the AP devices bound to the VFIO AP device driver. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-5-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 17:16:19 -06:00
return 0;
matrix_drv_err:
device_unregister(&matrix_dev->device);
s390: vfio-ap: base implementation of VFIO AP device driver Introduces a new AP device driver. This device driver is built on the VFIO mediated device framework. The framework provides sysfs interfaces that facilitate passthrough access by guests to devices installed on the linux host. The VFIO AP device driver will serve two purposes: 1. Provide the interfaces to reserve AP devices for exclusive use by KVM guests. This is accomplished by unbinding the devices to be reserved for guest usage from the zcrypt device driver and binding them to the VFIO AP device driver. 2. Implements the functions, callbacks and sysfs attribute interfaces required to create one or more VFIO mediated devices each of which will be used to configure the AP matrix for a guest and serve as a file descriptor for facilitating communication between QEMU and the VFIO AP device driver. When the VFIO AP device driver is initialized: * It registers with the AP bus for control of type 10 (CEX4 and newer) AP queue devices. This limitation was imposed due to: 1. A desire to keep the code as simple as possible; 2. Some older models are no longer supported by the kernel and others are getting close to end of service. 3. A lack of older systems on which to test older devices. The probe and remove callbacks will be provided to support the binding/unbinding of AP queue devices to/from the VFIO AP device driver. * Creates a matrix device, /sys/devices/vfio_ap/matrix, to serve as the parent of the mediated devices created, one for each guest, and to hold the APQNs of the AP devices bound to the VFIO AP device driver. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-5-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 17:16:19 -06:00
matrix_reg_err:
put_device(&matrix_dev->device);
matrix_alloc_err:
bus_unregister(&matrix_bus);
bus_register_err:
s390: vfio-ap: base implementation of VFIO AP device driver Introduces a new AP device driver. This device driver is built on the VFIO mediated device framework. The framework provides sysfs interfaces that facilitate passthrough access by guests to devices installed on the linux host. The VFIO AP device driver will serve two purposes: 1. Provide the interfaces to reserve AP devices for exclusive use by KVM guests. This is accomplished by unbinding the devices to be reserved for guest usage from the zcrypt device driver and binding them to the VFIO AP device driver. 2. Implements the functions, callbacks and sysfs attribute interfaces required to create one or more VFIO mediated devices each of which will be used to configure the AP matrix for a guest and serve as a file descriptor for facilitating communication between QEMU and the VFIO AP device driver. When the VFIO AP device driver is initialized: * It registers with the AP bus for control of type 10 (CEX4 and newer) AP queue devices. This limitation was imposed due to: 1. A desire to keep the code as simple as possible; 2. Some older models are no longer supported by the kernel and others are getting close to end of service. 3. A lack of older systems on which to test older devices. The probe and remove callbacks will be provided to support the binding/unbinding of AP queue devices to/from the VFIO AP device driver. * Creates a matrix device, /sys/devices/vfio_ap/matrix, to serve as the parent of the mediated devices created, one for each guest, and to hold the APQNs of the AP devices bound to the VFIO AP device driver. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-5-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 17:16:19 -06:00
root_device_unregister(root_device);
return ret;
}
static void vfio_ap_matrix_dev_destroy(void)
{
struct device *root_device = matrix_dev->device.parent;
driver_unregister(&matrix_driver);
s390: vfio-ap: base implementation of VFIO AP device driver Introduces a new AP device driver. This device driver is built on the VFIO mediated device framework. The framework provides sysfs interfaces that facilitate passthrough access by guests to devices installed on the linux host. The VFIO AP device driver will serve two purposes: 1. Provide the interfaces to reserve AP devices for exclusive use by KVM guests. This is accomplished by unbinding the devices to be reserved for guest usage from the zcrypt device driver and binding them to the VFIO AP device driver. 2. Implements the functions, callbacks and sysfs attribute interfaces required to create one or more VFIO mediated devices each of which will be used to configure the AP matrix for a guest and serve as a file descriptor for facilitating communication between QEMU and the VFIO AP device driver. When the VFIO AP device driver is initialized: * It registers with the AP bus for control of type 10 (CEX4 and newer) AP queue devices. This limitation was imposed due to: 1. A desire to keep the code as simple as possible; 2. Some older models are no longer supported by the kernel and others are getting close to end of service. 3. A lack of older systems on which to test older devices. The probe and remove callbacks will be provided to support the binding/unbinding of AP queue devices to/from the VFIO AP device driver. * Creates a matrix device, /sys/devices/vfio_ap/matrix, to serve as the parent of the mediated devices created, one for each guest, and to hold the APQNs of the AP devices bound to the VFIO AP device driver. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-5-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 17:16:19 -06:00
device_unregister(&matrix_dev->device);
bus_unregister(&matrix_bus);
root_device_unregister(root_device);
s390: vfio-ap: base implementation of VFIO AP device driver Introduces a new AP device driver. This device driver is built on the VFIO mediated device framework. The framework provides sysfs interfaces that facilitate passthrough access by guests to devices installed on the linux host. The VFIO AP device driver will serve two purposes: 1. Provide the interfaces to reserve AP devices for exclusive use by KVM guests. This is accomplished by unbinding the devices to be reserved for guest usage from the zcrypt device driver and binding them to the VFIO AP device driver. 2. Implements the functions, callbacks and sysfs attribute interfaces required to create one or more VFIO mediated devices each of which will be used to configure the AP matrix for a guest and serve as a file descriptor for facilitating communication between QEMU and the VFIO AP device driver. When the VFIO AP device driver is initialized: * It registers with the AP bus for control of type 10 (CEX4 and newer) AP queue devices. This limitation was imposed due to: 1. A desire to keep the code as simple as possible; 2. Some older models are no longer supported by the kernel and others are getting close to end of service. 3. A lack of older systems on which to test older devices. The probe and remove callbacks will be provided to support the binding/unbinding of AP queue devices to/from the VFIO AP device driver. * Creates a matrix device, /sys/devices/vfio_ap/matrix, to serve as the parent of the mediated devices created, one for each guest, and to hold the APQNs of the AP devices bound to the VFIO AP device driver. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-5-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 17:16:19 -06:00
}
static int __init vfio_ap_init(void)
s390: vfio-ap: base implementation of VFIO AP device driver Introduces a new AP device driver. This device driver is built on the VFIO mediated device framework. The framework provides sysfs interfaces that facilitate passthrough access by guests to devices installed on the linux host. The VFIO AP device driver will serve two purposes: 1. Provide the interfaces to reserve AP devices for exclusive use by KVM guests. This is accomplished by unbinding the devices to be reserved for guest usage from the zcrypt device driver and binding them to the VFIO AP device driver. 2. Implements the functions, callbacks and sysfs attribute interfaces required to create one or more VFIO mediated devices each of which will be used to configure the AP matrix for a guest and serve as a file descriptor for facilitating communication between QEMU and the VFIO AP device driver. When the VFIO AP device driver is initialized: * It registers with the AP bus for control of type 10 (CEX4 and newer) AP queue devices. This limitation was imposed due to: 1. A desire to keep the code as simple as possible; 2. Some older models are no longer supported by the kernel and others are getting close to end of service. 3. A lack of older systems on which to test older devices. The probe and remove callbacks will be provided to support the binding/unbinding of AP queue devices to/from the VFIO AP device driver. * Creates a matrix device, /sys/devices/vfio_ap/matrix, to serve as the parent of the mediated devices created, one for each guest, and to hold the APQNs of the AP devices bound to the VFIO AP device driver. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-5-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 17:16:19 -06:00
{
int ret;
/* If there are no AP instructions, there is nothing to pass through. */
if (!ap_instructions_available())
return -ENODEV;
ret = vfio_ap_matrix_dev_create();
if (ret)
return ret;
memset(&vfio_ap_drv, 0, sizeof(vfio_ap_drv));
vfio_ap_drv.probe = vfio_ap_queue_dev_probe;
vfio_ap_drv.remove = vfio_ap_queue_dev_remove;
vfio_ap_drv.ids = ap_queue_ids;
ret = ap_driver_register(&vfio_ap_drv, THIS_MODULE, VFIO_AP_DRV_NAME);
if (ret) {
vfio_ap_matrix_dev_destroy();
return ret;
}
2018-09-25 17:16:20 -06:00
ret = vfio_ap_mdev_register();
if (ret) {
ap_driver_unregister(&vfio_ap_drv);
vfio_ap_matrix_dev_destroy();
return ret;
}
s390: vfio-ap: base implementation of VFIO AP device driver Introduces a new AP device driver. This device driver is built on the VFIO mediated device framework. The framework provides sysfs interfaces that facilitate passthrough access by guests to devices installed on the linux host. The VFIO AP device driver will serve two purposes: 1. Provide the interfaces to reserve AP devices for exclusive use by KVM guests. This is accomplished by unbinding the devices to be reserved for guest usage from the zcrypt device driver and binding them to the VFIO AP device driver. 2. Implements the functions, callbacks and sysfs attribute interfaces required to create one or more VFIO mediated devices each of which will be used to configure the AP matrix for a guest and serve as a file descriptor for facilitating communication between QEMU and the VFIO AP device driver. When the VFIO AP device driver is initialized: * It registers with the AP bus for control of type 10 (CEX4 and newer) AP queue devices. This limitation was imposed due to: 1. A desire to keep the code as simple as possible; 2. Some older models are no longer supported by the kernel and others are getting close to end of service. 3. A lack of older systems on which to test older devices. The probe and remove callbacks will be provided to support the binding/unbinding of AP queue devices to/from the VFIO AP device driver. * Creates a matrix device, /sys/devices/vfio_ap/matrix, to serve as the parent of the mediated devices created, one for each guest, and to hold the APQNs of the AP devices bound to the VFIO AP device driver. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-5-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 17:16:19 -06:00
return 0;
}
static void __exit vfio_ap_exit(void)
s390: vfio-ap: base implementation of VFIO AP device driver Introduces a new AP device driver. This device driver is built on the VFIO mediated device framework. The framework provides sysfs interfaces that facilitate passthrough access by guests to devices installed on the linux host. The VFIO AP device driver will serve two purposes: 1. Provide the interfaces to reserve AP devices for exclusive use by KVM guests. This is accomplished by unbinding the devices to be reserved for guest usage from the zcrypt device driver and binding them to the VFIO AP device driver. 2. Implements the functions, callbacks and sysfs attribute interfaces required to create one or more VFIO mediated devices each of which will be used to configure the AP matrix for a guest and serve as a file descriptor for facilitating communication between QEMU and the VFIO AP device driver. When the VFIO AP device driver is initialized: * It registers with the AP bus for control of type 10 (CEX4 and newer) AP queue devices. This limitation was imposed due to: 1. A desire to keep the code as simple as possible; 2. Some older models are no longer supported by the kernel and others are getting close to end of service. 3. A lack of older systems on which to test older devices. The probe and remove callbacks will be provided to support the binding/unbinding of AP queue devices to/from the VFIO AP device driver. * Creates a matrix device, /sys/devices/vfio_ap/matrix, to serve as the parent of the mediated devices created, one for each guest, and to hold the APQNs of the AP devices bound to the VFIO AP device driver. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-5-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 17:16:19 -06:00
{
2018-09-25 17:16:20 -06:00
vfio_ap_mdev_unregister();
s390: vfio-ap: base implementation of VFIO AP device driver Introduces a new AP device driver. This device driver is built on the VFIO mediated device framework. The framework provides sysfs interfaces that facilitate passthrough access by guests to devices installed on the linux host. The VFIO AP device driver will serve two purposes: 1. Provide the interfaces to reserve AP devices for exclusive use by KVM guests. This is accomplished by unbinding the devices to be reserved for guest usage from the zcrypt device driver and binding them to the VFIO AP device driver. 2. Implements the functions, callbacks and sysfs attribute interfaces required to create one or more VFIO mediated devices each of which will be used to configure the AP matrix for a guest and serve as a file descriptor for facilitating communication between QEMU and the VFIO AP device driver. When the VFIO AP device driver is initialized: * It registers with the AP bus for control of type 10 (CEX4 and newer) AP queue devices. This limitation was imposed due to: 1. A desire to keep the code as simple as possible; 2. Some older models are no longer supported by the kernel and others are getting close to end of service. 3. A lack of older systems on which to test older devices. The probe and remove callbacks will be provided to support the binding/unbinding of AP queue devices to/from the VFIO AP device driver. * Creates a matrix device, /sys/devices/vfio_ap/matrix, to serve as the parent of the mediated devices created, one for each guest, and to hold the APQNs of the AP devices bound to the VFIO AP device driver. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-5-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 17:16:19 -06:00
ap_driver_unregister(&vfio_ap_drv);
vfio_ap_matrix_dev_destroy();
}
module_init(vfio_ap_init);
module_exit(vfio_ap_exit);