redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity
alistair23-linux/arch/mips/ralink/rt305x.c

279 lines
8.4 KiB
C
Raw Permalink Normal View History

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-04 02:11:33 -06:00
// SPDX-License-Identifier: GPL-2.0-only
MIPS: ralink: adds support for RT305x SoC family Add support code for rt3050, rt3052, rt3350, rt3352 and rt5350 SOC. The code detects the SoC and registers the clk / pinmux settings. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4896/
2013-01-20 14:03:46 -07:00
/*
*
* Parts of this file are based on Ralink's 2.6.21 BSP
*
* Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
MIPS: Change my email address The old address is no longer valid. Use the my new one instead. Signed-off-by: John Crispin <john@phrozen.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13201/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-05 01:57:56 -06:00
* Copyright (C) 2013 John Crispin <john@phrozen.org>
MIPS: ralink: adds support for RT305x SoC family Add support code for rt3050, rt3052, rt3350, rt3352 and rt5350 SOC. The code detects the SoC and registers the clk / pinmux settings. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4896/
2013-01-20 14:03:46 -07:00
*/
#include <linux/kernel.h>
#include <linux/init.h>
MIPS: Audit and remove any unnecessary uses of module.h Historically a lot of these existed because we did not have a distinction between what was modular code and what was providing support to modules via EXPORT_SYMBOL and friends. That changed when we forked out support for the latter into the export.h file. This means we should be able to reduce the usage of module.h in code that is obj-y Makefile or bool Kconfig. In the case of some code where it is modular, we can extend that to also include files that are building basic support functionality but not related to loading or registering the final module; such files also have no need whatsoever for module.h The advantage in removing such instances is that module.h itself sources about 15 other headers; adding significantly to what we feed cpp, and it can obscure what headers we are effectively using. Since module.h might have been the implicit source for init.h (for __init) and for export.h (for EXPORT_SYMBOL) we consider each instance for the presence of either and replace/add as needed. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. Build coverage of all the mips defconfigs revealed the module.h header was masking a couple of implicit include instances, so we add the appropriate headers there. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: David Daney <david.daney@cavium.com> Cc: John Crispin <john@phrozen.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: "Steven J. Hill" <steven.hill@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15131/ [james.hogan@imgtec.com: Preserve sort order where it already exists] Signed-off-by: James Hogan <james.hogan@imgtec.com>
2017-01-28 19:05:57 -07:00
#include <linux/bug.h>
MIPS: ralink: adds support for RT305x SoC family Add support code for rt3050, rt3052, rt3350, rt3352 and rt5350 SOC. The code detects the SoC and registers the clk / pinmux settings. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4896/
2013-01-20 14:03:46 -07:00
MIPS: Audit and remove any unnecessary uses of module.h Historically a lot of these existed because we did not have a distinction between what was modular code and what was providing support to modules via EXPORT_SYMBOL and friends. That changed when we forked out support for the latter into the export.h file. This means we should be able to reduce the usage of module.h in code that is obj-y Makefile or bool Kconfig. In the case of some code where it is modular, we can extend that to also include files that are building basic support functionality but not related to loading or registering the final module; such files also have no need whatsoever for module.h The advantage in removing such instances is that module.h itself sources about 15 other headers; adding significantly to what we feed cpp, and it can obscure what headers we are effectively using. Since module.h might have been the implicit source for init.h (for __init) and for export.h (for EXPORT_SYMBOL) we consider each instance for the presence of either and replace/add as needed. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. Build coverage of all the mips defconfigs revealed the module.h header was masking a couple of implicit include instances, so we add the appropriate headers there. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: David Daney <david.daney@cavium.com> Cc: John Crispin <john@phrozen.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: "Steven J. Hill" <steven.hill@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15131/ [james.hogan@imgtec.com: Preserve sort order where it already exists] Signed-off-by: James Hogan <james.hogan@imgtec.com>
2017-01-28 19:05:57 -07:00
#include <asm/io.h>
MIPS: ralink: adds support for RT305x SoC family Add support code for rt3050, rt3052, rt3350, rt3352 and rt5350 SOC. The code detects the SoC and registers the clk / pinmux settings. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4896/
2013-01-20 14:03:46 -07:00
#include <asm/mipsregs.h>
#include <asm/mach-ralink/ralink_regs.h>
#include <asm/mach-ralink/rt305x.h>
MIPS: ralink: cleanup the soc specific pinmux data Before we had a pinctrl driver we used a custom OF api. This patch converts the soc specific pinmux data to a new set of structs. We also add some new pinmux setings. Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/8009/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-10-08 20:02:53 -06:00
#include <asm/mach-ralink/pinmux.h>
MIPS: ralink: adds support for RT305x SoC family Add support code for rt3050, rt3052, rt3350, rt3352 and rt5350 SOC. The code detects the SoC and registers the clk / pinmux settings. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4896/
2013-01-20 14:03:46 -07:00
#include "common.h"
MIPS: ralink: cleanup the soc specific pinmux data Before we had a pinctrl driver we used a custom OF api. This patch converts the soc specific pinmux data to a new set of structs. We also add some new pinmux setings. Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/8009/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-10-08 20:02:53 -06:00
static struct rt2880_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) };
static struct rt2880_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) };
static struct rt2880_pmx_func uartf_func[] = {
FUNC("uartf", RT305X_GPIO_MODE_UARTF, 7, 8),
FUNC("pcm uartf", RT305X_GPIO_MODE_PCM_UARTF, 7, 8),
FUNC("pcm i2s", RT305X_GPIO_MODE_PCM_I2S, 7, 8),
FUNC("i2s uartf", RT305X_GPIO_MODE_I2S_UARTF, 7, 8),
FUNC("pcm gpio", RT305X_GPIO_MODE_PCM_GPIO, 11, 4),
FUNC("gpio uartf", RT305X_GPIO_MODE_GPIO_UARTF, 7, 4),
FUNC("gpio i2s", RT305X_GPIO_MODE_GPIO_I2S, 7, 4),
};
static struct rt2880_pmx_func uartlite_func[] = { FUNC("uartlite", 0, 15, 2) };
static struct rt2880_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 5) };
static struct rt2880_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 2) };
static struct rt2880_pmx_func rt5350_led_func[] = { FUNC("led", 0, 22, 5) };
static struct rt2880_pmx_func rt5350_cs1_func[] = {
FUNC("spi_cs1", 0, 27, 1),
FUNC("wdg_cs1", 1, 27, 1),
};
static struct rt2880_pmx_func sdram_func[] = { FUNC("sdram", 0, 24, 16) };
static struct rt2880_pmx_func rt3352_rgmii_func[] = {
FUNC("rgmii", 0, 24, 12)
};
static struct rt2880_pmx_func rgmii_func[] = { FUNC("rgmii", 0, 40, 12) };
static struct rt2880_pmx_func rt3352_lna_func[] = { FUNC("lna", 0, 36, 2) };
static struct rt2880_pmx_func rt3352_pa_func[] = { FUNC("pa", 0, 38, 2) };
static struct rt2880_pmx_func rt3352_led_func[] = { FUNC("led", 0, 40, 5) };
MIPS: ralink: Add rt3352 SPI_CS1 pinmux The rt3352 has a pin that can be used as second spi chip select, watchdog reset or GPIO. The pinmux setup was missing the definition of said pin. The pin is configured via the same bit on rt5350, so reuse the existing macro. Signed-off-by: Mathias Kresin <dev@kresin.me> Signed-off-by: Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/20301/ Cc: John Crispin <john@phrozen.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org
2018-08-22 14:38:06 -06:00
static struct rt2880_pmx_func rt3352_cs1_func[] = {
FUNC("spi_cs1", 0, 45, 1),
FUNC("wdg_cs1", 1, 45, 1),
};
MIPS: ralink: cleanup the soc specific pinmux data Before we had a pinctrl driver we used a custom OF api. This patch converts the soc specific pinmux data to a new set of structs. We also add some new pinmux setings. Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/8009/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-10-08 20:02:53 -06:00
static struct rt2880_pmx_group rt3050_pinmux_data[] = {
GRP("i2c", i2c_func, 1, RT305X_GPIO_MODE_I2C),
GRP("spi", spi_func, 1, RT305X_GPIO_MODE_SPI),
GRP("uartf", uartf_func, RT305X_GPIO_MODE_UART0_MASK,
RT305X_GPIO_MODE_UART0_SHIFT),
GRP("uartlite", uartlite_func, 1, RT305X_GPIO_MODE_UART1),
GRP("jtag", jtag_func, 1, RT305X_GPIO_MODE_JTAG),
GRP("mdio", mdio_func, 1, RT305X_GPIO_MODE_MDIO),
GRP("rgmii", rgmii_func, 1, RT305X_GPIO_MODE_RGMII),
GRP("sdram", sdram_func, 1, RT305X_GPIO_MODE_SDRAM),
{ 0 }
MIPS: ralink: adds support for RT305x SoC family Add support code for rt3050, rt3052, rt3350, rt3352 and rt5350 SOC. The code detects the SoC and registers the clk / pinmux settings. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4896/
2013-01-20 14:03:46 -07:00
};
MIPS: ralink: cleanup the soc specific pinmux data Before we had a pinctrl driver we used a custom OF api. This patch converts the soc specific pinmux data to a new set of structs. We also add some new pinmux setings. Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/8009/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-10-08 20:02:53 -06:00
static struct rt2880_pmx_group rt3352_pinmux_data[] = {
GRP("i2c", i2c_func, 1, RT305X_GPIO_MODE_I2C),
GRP("spi", spi_func, 1, RT305X_GPIO_MODE_SPI),
GRP("uartf", uartf_func, RT305X_GPIO_MODE_UART0_MASK,
RT305X_GPIO_MODE_UART0_SHIFT),
GRP("uartlite", uartlite_func, 1, RT305X_GPIO_MODE_UART1),
GRP("jtag", jtag_func, 1, RT305X_GPIO_MODE_JTAG),
GRP("mdio", mdio_func, 1, RT305X_GPIO_MODE_MDIO),
GRP("rgmii", rt3352_rgmii_func, 1, RT305X_GPIO_MODE_RGMII),
GRP("lna", rt3352_lna_func, 1, RT3352_GPIO_MODE_LNA),
GRP("pa", rt3352_pa_func, 1, RT3352_GPIO_MODE_PA),
GRP("led", rt3352_led_func, 1, RT5350_GPIO_MODE_PHY_LED),
MIPS: ralink: Add rt3352 SPI_CS1 pinmux The rt3352 has a pin that can be used as second spi chip select, watchdog reset or GPIO. The pinmux setup was missing the definition of said pin. The pin is configured via the same bit on rt5350, so reuse the existing macro. Signed-off-by: Mathias Kresin <dev@kresin.me> Signed-off-by: Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/20301/ Cc: John Crispin <john@phrozen.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org
2018-08-22 14:38:06 -06:00
GRP("spi_cs1", rt3352_cs1_func, 2, RT5350_GPIO_MODE_SPI_CS1),
MIPS: ralink: cleanup the soc specific pinmux data Before we had a pinctrl driver we used a custom OF api. This patch converts the soc specific pinmux data to a new set of structs. We also add some new pinmux setings. Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/8009/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-10-08 20:02:53 -06:00
{ 0 }
};
static struct rt2880_pmx_group rt5350_pinmux_data[] = {
GRP("i2c", i2c_func, 1, RT305X_GPIO_MODE_I2C),
GRP("spi", spi_func, 1, RT305X_GPIO_MODE_SPI),
GRP("uartf", uartf_func, RT305X_GPIO_MODE_UART0_MASK,
RT305X_GPIO_MODE_UART0_SHIFT),
GRP("uartlite", uartlite_func, 1, RT305X_GPIO_MODE_UART1),
GRP("jtag", jtag_func, 1, RT305X_GPIO_MODE_JTAG),
GRP("led", rt5350_led_func, 1, RT5350_GPIO_MODE_PHY_LED),
GRP("spi_cs1", rt5350_cs1_func, 2, RT5350_GPIO_MODE_SPI_CS1),
{ 0 }
MIPS: ralink: adds support for RT305x SoC family Add support code for rt3050, rt3052, rt3350, rt3352 and rt5350 SOC. The code detects the SoC and registers the clk / pinmux settings. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4896/
2013-01-20 14:03:46 -07:00
};
MIPS: ralink: add memory definition for RT305x Populate struct soc_info with the data that describes our RAM window. As memory detection fails on RT5350 we read the amount of available memory from the system controller. Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5180/
2013-04-13 07:13:40 -06:00
static unsigned long rt5350_get_mem_size(void)
{
void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT305X_SYSC_BASE);
unsigned long ret;
u32 t;
t = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG);
t = (t >> RT5350_SYSCFG0_DRAM_SIZE_SHIFT) &
RT5350_SYSCFG0_DRAM_SIZE_MASK;
switch (t) {
case RT5350_SYSCFG0_DRAM_SIZE_2M:
ret = 2;
break;
case RT5350_SYSCFG0_DRAM_SIZE_8M:
ret = 8;
break;
case RT5350_SYSCFG0_DRAM_SIZE_16M:
ret = 16;
break;
case RT5350_SYSCFG0_DRAM_SIZE_32M:
ret = 32;
break;
case RT5350_SYSCFG0_DRAM_SIZE_64M:
ret = 64;
break;
default:
panic("rt5350: invalid DRAM size: %u", t);
break;
}
return ret;
}
MIPS: ralink: adds support for RT305x SoC family Add support code for rt3050, rt3052, rt3350, rt3352 and rt5350 SOC. The code detects the SoC and registers the clk / pinmux settings. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4896/
2013-01-20 14:03:46 -07:00
void __init ralink_clk_init(void)
{
unsigned long cpu_rate, sys_rate, wdt_rate, uart_rate;
MIPS: ralink: fix RT305x clock setup Add a few missing clocks. Signed-off-by: John Crispin <blogic@openwrt.org> Acked-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5167/
2013-03-22 12:25:59 -06:00
unsigned long wmac_rate = 40000000;
MIPS: ralink: adds support for RT305x SoC family Add support code for rt3050, rt3052, rt3350, rt3352 and rt5350 SOC. The code detects the SoC and registers the clk / pinmux settings. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4896/
2013-01-20 14:03:46 -07:00
u32 t = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG);
if (soc_is_rt305x() || soc_is_rt3350()) {
t = (t >> RT305X_SYSCFG_CPUCLK_SHIFT) &
RT305X_SYSCFG_CPUCLK_MASK;
switch (t) {
case RT305X_SYSCFG_CPUCLK_LOW:
cpu_rate = 320000000;
break;
case RT305X_SYSCFG_CPUCLK_HIGH:
cpu_rate = 384000000;
break;
}
sys_rate = uart_rate = wdt_rate = cpu_rate / 3;
} else if (soc_is_rt3352()) {
t = (t >> RT3352_SYSCFG0_CPUCLK_SHIFT) &
RT3352_SYSCFG0_CPUCLK_MASK;
switch (t) {
case RT3352_SYSCFG0_CPUCLK_LOW:
cpu_rate = 384000000;
break;
case RT3352_SYSCFG0_CPUCLK_HIGH:
cpu_rate = 400000000;
break;
}
sys_rate = wdt_rate = cpu_rate / 3;
uart_rate = 40000000;
} else if (soc_is_rt5350()) {
t = (t >> RT5350_SYSCFG0_CPUCLK_SHIFT) &
RT5350_SYSCFG0_CPUCLK_MASK;
switch (t) {
case RT5350_SYSCFG0_CPUCLK_360:
cpu_rate = 360000000;
sys_rate = cpu_rate / 3;
break;
case RT5350_SYSCFG0_CPUCLK_320:
cpu_rate = 320000000;
sys_rate = cpu_rate / 4;
break;
case RT5350_SYSCFG0_CPUCLK_300:
cpu_rate = 300000000;
sys_rate = cpu_rate / 3;
break;
default:
BUG();
}
uart_rate = 40000000;
wdt_rate = sys_rate;
} else {
BUG();
}
MIPS: ralink: fix RT305x clock setup Add a few missing clocks. Signed-off-by: John Crispin <blogic@openwrt.org> Acked-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5167/
2013-03-22 12:25:59 -06:00
if (soc_is_rt3352() || soc_is_rt5350()) {
u32 val = rt_sysc_r32(RT3352_SYSC_REG_SYSCFG0);
if (!(val & RT3352_CLKCFG0_XTAL_SEL))
wmac_rate = 20000000;
}
MIPS: ralink: adds support for RT305x SoC family Add support code for rt3050, rt3052, rt3350, rt3352 and rt5350 SOC. The code detects the SoC and registers the clk / pinmux settings. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4896/
2013-01-20 14:03:46 -07:00
ralink_clk_add("cpu", cpu_rate);
MIPS: ralink: Add missing clock on rt305x The rt305x support is missing a clock required by the ethernet driver. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11447/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-11-04 03:50:14 -07:00
ralink_clk_add("sys", sys_rate);
MIPS: ralink: Add missing I2C and I2S clocks. This patch adds two additional clocks required by the audio interface of the SoCs. Signed-off-by: John Crispin <john@phrozen.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14897/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-12-20 11:12:41 -07:00
ralink_clk_add("10000900.i2c", uart_rate);
ralink_clk_add("10000a00.i2s", uart_rate);
MIPS: ralink: adds support for RT305x SoC family Add support code for rt3050, rt3052, rt3350, rt3352 and rt5350 SOC. The code detects the SoC and registers the clk / pinmux settings. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4896/
2013-01-20 14:03:46 -07:00
ralink_clk_add("10000b00.spi", sys_rate);
MIPS: ralink: Add a few missing clocks Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11995/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-04 12:24:00 -07:00
ralink_clk_add("10000b40.spi", sys_rate);
MIPS: ralink: adds support for RT305x SoC family Add support code for rt3050, rt3052, rt3350, rt3352 and rt5350 SOC. The code detects the SoC and registers the clk / pinmux settings. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4896/
2013-01-20 14:03:46 -07:00
ralink_clk_add("10000100.timer", wdt_rate);
MIPS: ralink: fix RT305x clock setup Add a few missing clocks. Signed-off-by: John Crispin <blogic@openwrt.org> Acked-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5167/
2013-03-22 12:25:59 -06:00
ralink_clk_add("10000120.watchdog", wdt_rate);
MIPS: ralink: adds support for RT305x SoC family Add support code for rt3050, rt3052, rt3350, rt3352 and rt5350 SOC. The code detects the SoC and registers the clk / pinmux settings. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4896/
2013-01-20 14:03:46 -07:00
ralink_clk_add("10000500.uart", uart_rate);
ralink_clk_add("10000c00.uartlite", uart_rate);
MIPS: ralink: fix RT305x clock setup Add a few missing clocks. Signed-off-by: John Crispin <blogic@openwrt.org> Acked-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5167/
2013-03-22 12:25:59 -06:00
ralink_clk_add("10100000.ethernet", sys_rate);
ralink_clk_add("10180000.wmac", wmac_rate);
MIPS: ralink: adds support for RT305x SoC family Add support code for rt3050, rt3052, rt3350, rt3352 and rt5350 SOC. The code detects the SoC and registers the clk / pinmux settings. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4896/
2013-01-20 14:03:46 -07:00
}
void __init ralink_of_remap(void)
{
rt_sysc_membase = plat_of_remap_node("ralink,rt3050-sysc");
rt_memc_membase = plat_of_remap_node("ralink,rt3050-memc");
if (!rt_sysc_membase || !rt_memc_membase)
panic("Failed to remap core resources");
}
void prom_soc_init(struct ralink_soc_info *soc_info)
{
void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT305X_SYSC_BASE);
unsigned char *name;
u32 n0;
u32 n1;
u32 id;
n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
if (n0 == RT3052_CHIP_NAME0 && n1 == RT3052_CHIP_NAME1) {
unsigned long icache_sets;
icache_sets = (read_c0_config1() >> 22) & 7;
if (icache_sets == 1) {
MIPS: ralink: Unify SoC id handling This makes detection a lot easier for audio, wifi, ... drivers. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11440/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-11-04 03:50:07 -07:00
ralink_soc = RT305X_SOC_RT3050;
MIPS: ralink: adds support for RT305x SoC family Add support code for rt3050, rt3052, rt3350, rt3352 and rt5350 SOC. The code detects the SoC and registers the clk / pinmux settings. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4896/
2013-01-20 14:03:46 -07:00
name = "RT3050";
soc_info->compatible = "ralink,rt3050-soc";
} else {
MIPS: ralink: Unify SoC id handling This makes detection a lot easier for audio, wifi, ... drivers. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11440/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-11-04 03:50:07 -07:00
ralink_soc = RT305X_SOC_RT3052;
MIPS: ralink: adds support for RT305x SoC family Add support code for rt3050, rt3052, rt3350, rt3352 and rt5350 SOC. The code detects the SoC and registers the clk / pinmux settings. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4896/
2013-01-20 14:03:46 -07:00
name = "RT3052";
soc_info->compatible = "ralink,rt3052-soc";
}
} else if (n0 == RT3350_CHIP_NAME0 && n1 == RT3350_CHIP_NAME1) {
MIPS: ralink: Unify SoC id handling This makes detection a lot easier for audio, wifi, ... drivers. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11440/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-11-04 03:50:07 -07:00
ralink_soc = RT305X_SOC_RT3350;
MIPS: ralink: adds support for RT305x SoC family Add support code for rt3050, rt3052, rt3350, rt3352 and rt5350 SOC. The code detects the SoC and registers the clk / pinmux settings. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4896/
2013-01-20 14:03:46 -07:00
name = "RT3350";
soc_info->compatible = "ralink,rt3350-soc";
} else if (n0 == RT3352_CHIP_NAME0 && n1 == RT3352_CHIP_NAME1) {
MIPS: ralink: Unify SoC id handling This makes detection a lot easier for audio, wifi, ... drivers. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11440/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-11-04 03:50:07 -07:00
ralink_soc = RT305X_SOC_RT3352;
MIPS: ralink: adds support for RT305x SoC family Add support code for rt3050, rt3052, rt3350, rt3352 and rt5350 SOC. The code detects the SoC and registers the clk / pinmux settings. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4896/
2013-01-20 14:03:46 -07:00
name = "RT3352";
soc_info->compatible = "ralink,rt3352-soc";
} else if (n0 == RT5350_CHIP_NAME0 && n1 == RT5350_CHIP_NAME1) {
MIPS: ralink: Unify SoC id handling This makes detection a lot easier for audio, wifi, ... drivers. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11440/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-11-04 03:50:07 -07:00
ralink_soc = RT305X_SOC_RT5350;
MIPS: ralink: adds support for RT305x SoC family Add support code for rt3050, rt3052, rt3350, rt3352 and rt5350 SOC. The code detects the SoC and registers the clk / pinmux settings. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4896/
2013-01-20 14:03:46 -07:00
name = "RT5350";
soc_info->compatible = "ralink,rt5350-soc";
} else {
MIPS: Panic messages should not end in \n. Panic() is going to add a \n itself and it's annoying if a panic message rolls of the screen on a device with no scrollback. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-18 08:05:26 -06:00
panic("rt305x: unknown SoC, n0:%08x n1:%08x", n0, n1);
MIPS: ralink: adds support for RT305x SoC family Add support code for rt3050, rt3052, rt3350, rt3352 and rt5350 SOC. The code detects the SoC and registers the clk / pinmux settings. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4896/
2013-01-20 14:03:46 -07:00
}
id = __raw_readl(sysc + SYSC_REG_CHIP_ID);
snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
"Ralink %s id:%u rev:%u",
name,
(id >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK,
(id & CHIP_ID_REV_MASK));
MIPS: ralink: add memory definition for RT305x Populate struct soc_info with the data that describes our RAM window. As memory detection fails on RT5350 we read the amount of available memory from the system controller. Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5180/
2013-04-13 07:13:40 -06:00
soc_info->mem_base = RT305X_SDRAM_BASE;
if (soc_is_rt5350()) {
soc_info->mem_size = rt5350_get_mem_size();
MIPS: ralink: cleanup the soc specific pinmux data Before we had a pinctrl driver we used a custom OF api. This patch converts the soc specific pinmux data to a new set of structs. We also add some new pinmux setings. Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/8009/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-10-08 20:02:53 -06:00
rt2880_pinmux_data = rt5350_pinmux_data;
MIPS: ralink: add memory definition for RT305x Populate struct soc_info with the data that describes our RAM window. As memory detection fails on RT5350 we read the amount of available memory from the system controller. Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5180/
2013-04-13 07:13:40 -06:00
} else if (soc_is_rt305x() || soc_is_rt3350()) {
soc_info->mem_size_min = RT305X_MEM_SIZE_MIN;
soc_info->mem_size_max = RT305X_MEM_SIZE_MAX;
MIPS: ralink: cleanup the soc specific pinmux data Before we had a pinctrl driver we used a custom OF api. This patch converts the soc specific pinmux data to a new set of structs. We also add some new pinmux setings. Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/8009/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-10-08 20:02:53 -06:00
rt2880_pinmux_data = rt3050_pinmux_data;
MIPS: ralink: add memory definition for RT305x Populate struct soc_info with the data that describes our RAM window. As memory detection fails on RT5350 we read the amount of available memory from the system controller. Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5180/
2013-04-13 07:13:40 -06:00
} else if (soc_is_rt3352()) {
soc_info->mem_size_min = RT3352_MEM_SIZE_MIN;
soc_info->mem_size_max = RT3352_MEM_SIZE_MAX;
MIPS: ralink: cleanup the soc specific pinmux data Before we had a pinctrl driver we used a custom OF api. This patch converts the soc specific pinmux data to a new set of structs. We also add some new pinmux setings. Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/8009/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-10-08 20:02:53 -06:00
rt2880_pinmux_data = rt3352_pinmux_data;
MIPS: ralink: add memory definition for RT305x Populate struct soc_info with the data that describes our RAM window. As memory detection fails on RT5350 we read the amount of available memory from the system controller. Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5180/
2013-04-13 07:13:40 -06:00
}
MIPS: ralink: adds support for RT305x SoC family Add support code for rt3050, rt3052, rt3350, rt3352 and rt5350 SOC. The code detects the SoC and registers the clk / pinmux settings. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4896/
2013-01-20 14:03:46 -07:00
}