1
0
Fork 0
alistair23-linux/drivers/clk/sunxi/clk-factors.c

305 lines
7.7 KiB
C
Raw Permalink Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2013 Emilio López <emilio@elopez.com.ar>
*
* Adjustable factor-based clock implementation
*/
#include <linux/clk-provider.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/of_address.h>
#include <linux/slab.h>
#include <linux/string.h>
#include "clk-factors.h"
/*
* DOC: basic adjustable factor-based clock
*
* Traits of this clock:
* prepare - clk_prepare only ensures that parents are prepared
* enable - clk_enable only ensures that parents are enabled
* rate - rate is adjustable.
* clk->rate = (parent->rate * N * (K + 1) >> P) / (M + 1)
* parent - fixed parent. No clk_set_parent support
*/
#define to_clk_factors(_hw) container_of(_hw, struct clk_factors, hw)
#define FACTORS_MAX_PARENTS 5
#define SETMASK(len, pos) (((1U << (len)) - 1) << (pos))
#define CLRMASK(len, pos) (~(SETMASK(len, pos)))
#define FACTOR_GET(bit, len, reg) (((reg) & SETMASK(len, bit)) >> (bit))
#define FACTOR_SET(bit, len, reg, val) \
(((reg) & CLRMASK(len, bit)) | (val << (bit)))
static unsigned long clk_factors_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
u8 n = 1, k = 0, p = 0, m = 0;
u32 reg;
unsigned long rate;
struct clk_factors *factors = to_clk_factors(hw);
const struct clk_factors_config *config = factors->config;
/* Fetch the register value */
reg = readl(factors->reg);
/* Get each individual factor if applicable */
if (config->nwidth != SUNXI_FACTORS_NOT_APPLICABLE)
n = FACTOR_GET(config->nshift, config->nwidth, reg);
if (config->kwidth != SUNXI_FACTORS_NOT_APPLICABLE)
k = FACTOR_GET(config->kshift, config->kwidth, reg);
if (config->mwidth != SUNXI_FACTORS_NOT_APPLICABLE)
m = FACTOR_GET(config->mshift, config->mwidth, reg);
if (config->pwidth != SUNXI_FACTORS_NOT_APPLICABLE)
p = FACTOR_GET(config->pshift, config->pwidth, reg);
if (factors->recalc) {
struct factors_request factors_req = {
.parent_rate = parent_rate,
.n = n,
.k = k,
.m = m,
.p = p,
};
/* get mux details from mux clk structure */
if (factors->mux)
factors_req.parent_index =
(reg >> factors->mux->shift) &
factors->mux->mask;
factors->recalc(&factors_req);
return factors_req.rate;
}
/* Calculate the rate */
rate = (parent_rate * (n + config->n_start) * (k + 1) >> p) / (m + 1);
return rate;
}
clk: change clk_ops' ->determine_rate() prototype Clock rates are stored in an unsigned long field, but ->determine_rate() (which returns a rounded rate from a requested one) returns a long value (errors are reported using negative error codes), which can lead to long overflow if the clock rate exceed 2Ghz. Change ->determine_rate() prototype to return 0 or an error code, and pass a pointer to a clk_rate_request structure containing the expected target rate and the rate constraints imposed by clk users. The clk_rate_request structure might be extended in the future to contain other kind of constraints like the rounding policy, the maximum clock inaccuracy or other things that are not yet supported by the CCF (power consumption constraints ?). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Jonathan Corbet <corbet@lwn.net> CC: Tony Lindgren <tony@atomide.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: "Emilio López" <emilio@elopez.com.ar> CC: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Tero Kristo <t-kristo@ti.com> CC: Peter De Schrijver <pdeschrijver@nvidia.com> CC: Prashant Gaikwad <pgaikwad@nvidia.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Thierry Reding <thierry.reding@gmail.com> CC: Alexandre Courbot <gnurou@gmail.com> CC: linux-doc@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-omap@vger.kernel.org CC: linux-mips@linux-mips.org CC: linux-tegra@vger.kernel.org [sboyd@codeaurora.org: Fix parent dereference problem in __clk_determine_rate()] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> [sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate clocks without parents or a rate determining op] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-07 12:48:08 -06:00
static int clk_factors_determine_rate(struct clk_hw *hw,
struct clk_rate_request *req)
{
struct clk_factors *factors = to_clk_factors(hw);
struct clk_hw *parent, *best_parent = NULL;
int i, num_parents;
unsigned long parent_rate, best = 0, child_rate, best_child_rate = 0;
/* find the parent that can help provide the fastest rate <= rate */
num_parents = clk_hw_get_num_parents(hw);
for (i = 0; i < num_parents; i++) {
struct factors_request factors_req = {
.rate = req->rate,
.parent_index = i,
};
parent = clk_hw_get_parent_by_index(hw, i);
if (!parent)
continue;
if (clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT)
parent_rate = clk_hw_round_rate(parent, req->rate);
else
parent_rate = clk_hw_get_rate(parent);
factors_req.parent_rate = parent_rate;
factors->get_factors(&factors_req);
child_rate = factors_req.rate;
clk: change clk_ops' ->determine_rate() prototype Clock rates are stored in an unsigned long field, but ->determine_rate() (which returns a rounded rate from a requested one) returns a long value (errors are reported using negative error codes), which can lead to long overflow if the clock rate exceed 2Ghz. Change ->determine_rate() prototype to return 0 or an error code, and pass a pointer to a clk_rate_request structure containing the expected target rate and the rate constraints imposed by clk users. The clk_rate_request structure might be extended in the future to contain other kind of constraints like the rounding policy, the maximum clock inaccuracy or other things that are not yet supported by the CCF (power consumption constraints ?). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Jonathan Corbet <corbet@lwn.net> CC: Tony Lindgren <tony@atomide.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: "Emilio López" <emilio@elopez.com.ar> CC: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Tero Kristo <t-kristo@ti.com> CC: Peter De Schrijver <pdeschrijver@nvidia.com> CC: Prashant Gaikwad <pgaikwad@nvidia.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Thierry Reding <thierry.reding@gmail.com> CC: Alexandre Courbot <gnurou@gmail.com> CC: linux-doc@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-omap@vger.kernel.org CC: linux-mips@linux-mips.org CC: linux-tegra@vger.kernel.org [sboyd@codeaurora.org: Fix parent dereference problem in __clk_determine_rate()] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> [sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate clocks without parents or a rate determining op] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-07 12:48:08 -06:00
if (child_rate <= req->rate && child_rate > best_child_rate) {
best_parent = parent;
best = parent_rate;
best_child_rate = child_rate;
}
}
if (!best_parent)
return -EINVAL;
req->best_parent_hw = best_parent;
clk: change clk_ops' ->determine_rate() prototype Clock rates are stored in an unsigned long field, but ->determine_rate() (which returns a rounded rate from a requested one) returns a long value (errors are reported using negative error codes), which can lead to long overflow if the clock rate exceed 2Ghz. Change ->determine_rate() prototype to return 0 or an error code, and pass a pointer to a clk_rate_request structure containing the expected target rate and the rate constraints imposed by clk users. The clk_rate_request structure might be extended in the future to contain other kind of constraints like the rounding policy, the maximum clock inaccuracy or other things that are not yet supported by the CCF (power consumption constraints ?). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Jonathan Corbet <corbet@lwn.net> CC: Tony Lindgren <tony@atomide.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: "Emilio López" <emilio@elopez.com.ar> CC: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Tero Kristo <t-kristo@ti.com> CC: Peter De Schrijver <pdeschrijver@nvidia.com> CC: Prashant Gaikwad <pgaikwad@nvidia.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Thierry Reding <thierry.reding@gmail.com> CC: Alexandre Courbot <gnurou@gmail.com> CC: linux-doc@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-omap@vger.kernel.org CC: linux-mips@linux-mips.org CC: linux-tegra@vger.kernel.org [sboyd@codeaurora.org: Fix parent dereference problem in __clk_determine_rate()] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> [sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate clocks without parents or a rate determining op] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-07 12:48:08 -06:00
req->best_parent_rate = best;
req->rate = best_child_rate;
clk: change clk_ops' ->determine_rate() prototype Clock rates are stored in an unsigned long field, but ->determine_rate() (which returns a rounded rate from a requested one) returns a long value (errors are reported using negative error codes), which can lead to long overflow if the clock rate exceed 2Ghz. Change ->determine_rate() prototype to return 0 or an error code, and pass a pointer to a clk_rate_request structure containing the expected target rate and the rate constraints imposed by clk users. The clk_rate_request structure might be extended in the future to contain other kind of constraints like the rounding policy, the maximum clock inaccuracy or other things that are not yet supported by the CCF (power consumption constraints ?). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Jonathan Corbet <corbet@lwn.net> CC: Tony Lindgren <tony@atomide.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: "Emilio López" <emilio@elopez.com.ar> CC: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Tero Kristo <t-kristo@ti.com> CC: Peter De Schrijver <pdeschrijver@nvidia.com> CC: Prashant Gaikwad <pgaikwad@nvidia.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Thierry Reding <thierry.reding@gmail.com> CC: Alexandre Courbot <gnurou@gmail.com> CC: linux-doc@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-omap@vger.kernel.org CC: linux-mips@linux-mips.org CC: linux-tegra@vger.kernel.org [sboyd@codeaurora.org: Fix parent dereference problem in __clk_determine_rate()] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> [sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate clocks without parents or a rate determining op] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-07 12:48:08 -06:00
return 0;
}
static int clk_factors_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct factors_request req = {
.rate = rate,
.parent_rate = parent_rate,
};
u32 reg;
struct clk_factors *factors = to_clk_factors(hw);
const struct clk_factors_config *config = factors->config;
unsigned long flags = 0;
factors->get_factors(&req);
if (factors->lock)
spin_lock_irqsave(factors->lock, flags);
/* Fetch the register value */
reg = readl(factors->reg);
/* Set up the new factors - macros do not do anything if width is 0 */
reg = FACTOR_SET(config->nshift, config->nwidth, reg, req.n);
reg = FACTOR_SET(config->kshift, config->kwidth, reg, req.k);
reg = FACTOR_SET(config->mshift, config->mwidth, reg, req.m);
reg = FACTOR_SET(config->pshift, config->pwidth, reg, req.p);
/* Apply them now */
writel(reg, factors->reg);
/* delay 500us so pll stabilizes */
__delay((rate >> 20) * 500 / 2);
if (factors->lock)
spin_unlock_irqrestore(factors->lock, flags);
return 0;
}
static const struct clk_ops clk_factors_ops = {
.determine_rate = clk_factors_determine_rate,
.recalc_rate = clk_factors_recalc_rate,
.set_rate = clk_factors_set_rate,
};
static struct clk *__sunxi_factors_register(struct device_node *node,
const struct factors_data *data,
spinlock_t *lock, void __iomem *reg,
unsigned long flags)
{
struct clk *clk;
struct clk_factors *factors;
struct clk_gate *gate = NULL;
struct clk_mux *mux = NULL;
struct clk_hw *gate_hw = NULL;
struct clk_hw *mux_hw = NULL;
const char *clk_name = node->name;
const char *parents[FACTORS_MAX_PARENTS];
int ret, i = 0;
/* if we have a mux, we will have >1 parents */
i = of_clk_parent_fill(node, parents, FACTORS_MAX_PARENTS);
/*
* some factor clocks, such as pll5 and pll6, may have multiple
* outputs, and have their name designated in factors_data
*/
if (data->name)
clk_name = data->name;
else
of_property_read_string(node, "clock-output-names", &clk_name);
factors = kzalloc(sizeof(struct clk_factors), GFP_KERNEL);
if (!factors)
goto err_factors;
/* set up factors properties */
factors->reg = reg;
factors->config = data->table;
factors->get_factors = data->getter;
factors->recalc = data->recalc;
factors->lock = lock;
/* Add a gate if this factor clock can be gated */
if (data->enable) {
gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL);
if (!gate)
goto err_gate;
factors->gate = gate;
/* set up gate properties */
gate->reg = reg;
gate->bit_idx = data->enable;
gate->lock = factors->lock;
gate_hw = &gate->hw;
}
/* Add a mux if this factor clock can be muxed */
if (data->mux) {
mux = kzalloc(sizeof(struct clk_mux), GFP_KERNEL);
if (!mux)
goto err_mux;
factors->mux = mux;
/* set up gate properties */
mux->reg = reg;
mux->shift = data->mux;
mux->mask = data->muxmask;
mux->lock = factors->lock;
mux_hw = &mux->hw;
}
clk = clk_register_composite(NULL, clk_name,
parents, i,
mux_hw, &clk_mux_ops,
&factors->hw, &clk_factors_ops,
gate_hw, &clk_gate_ops, CLK_IS_CRITICAL);
if (IS_ERR(clk))
goto err_register;
ret = of_clk_add_provider(node, of_clk_src_simple_get, clk);
if (ret)
goto err_provider;
return clk;
err_provider:
/* TODO: The composite clock stuff will leak a bit here. */
clk_unregister(clk);
err_register:
kfree(mux);
err_mux:
kfree(gate);
err_gate:
kfree(factors);
err_factors:
return NULL;
}
struct clk *sunxi_factors_register(struct device_node *node,
const struct factors_data *data,
spinlock_t *lock,
void __iomem *reg)
{
return __sunxi_factors_register(node, data, lock, reg, 0);
}
struct clk *sunxi_factors_register_critical(struct device_node *node,
const struct factors_data *data,
spinlock_t *lock,
void __iomem *reg)
{
return __sunxi_factors_register(node, data, lock, reg, CLK_IS_CRITICAL);
}
void sunxi_factors_unregister(struct device_node *node, struct clk *clk)
{
struct clk_hw *hw = __clk_get_hw(clk);
struct clk_factors *factors;
if (!hw)
return;
factors = to_clk_factors(hw);
of_clk_del_provider(node);
/* TODO: The composite clock stuff will leak a bit here. */
clk_unregister(clk);
kfree(factors->mux);
kfree(factors->gate);
kfree(factors);
}