1
0
Fork 0
alistair23-linux/drivers/firmware/efi/runtime-wrappers.c

479 lines
14 KiB
C
Raw Permalink Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* runtime-wrappers.c - Runtime Services function call wrappers
*
efi: Use a work queue to invoke EFI Runtime Services Presently, when a user process requests the kernel to execute any UEFI runtime service, the kernel temporarily switches to a separate set of page tables that describe the virtual mapping of the UEFI runtime services regions in memory. Since UEFI runtime services are typically invoked with interrupts enabled, any code that may be called during this time, will have an incorrect view of the process's address space. Although it is unusual for code running in interrupt context to make assumptions about the process context it runs in, there are cases (such as the perf subsystem taking samples) where this causes problems. So let's set up a work queue for calling UEFI runtime services, so that the actual calls are made when the work queue items are dispatched by a work queue worker running in a separate kernel thread. Such threads are not expected to have userland mappings in the first place, and so the additional mappings created for the UEFI runtime services can never clash with any. The ResetSystem() runtime service is not covered by the work queue handling, since it is not expected to return, and may be called at a time when the kernel is torn down to the point where we cannot expect work queues to still be operational. The non-blocking variants of SetVariable() and QueryVariableInfo() are also excluded: these are intended to be used from atomic context, which obviously rules out waiting for a completion to be signalled by another thread. Note that these variants are currently only used for UEFI runtime services calls that occur very early in the boot, and for ones that occur in critical conditions, e.g., to flush kernel logs to UEFI variables via efi-pstore. Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> [ardb: exclude ResetSystem() from the workqueue treatment merge from 2 separate patches and rewrite commit log] Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20180711094040.12506-4-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-07-11 03:40:35 -06:00
* Implementation summary:
* -----------------------
* 1. When user/kernel thread requests to execute efi_runtime_service(),
* enqueue work to efi_rts_wq.
* 2. Caller thread waits for completion until the work is finished
* because it's dependent on the return status and execution of
* efi_runtime_service().
* For instance, get_variable() and get_next_variable().
*
* Copyright (C) 2014 Linaro Ltd. <ard.biesheuvel@linaro.org>
*
* Split off from arch/x86/platform/efi/efi.c
*
* Copyright (C) 1999 VA Linux Systems
* Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
* Copyright (C) 1999-2002 Hewlett-Packard Co.
* Copyright (C) 2005-2008 Intel Co.
* Copyright (C) 2013 SuSE Labs
*/
#define pr_fmt(fmt) "efi: " fmt
#include <linux/bug.h>
#include <linux/efi.h>
efi/runtime-wrappers: Detect firmware IRQ flag corruption The UEFI spec allows runtime services to be called with interrupts masked or unmasked, and if a runtime service function needs to mask interrupts, it must restore the mask to its original state before returning (i.e. from the PoV of the OS, this does not change across a call). Firmware should never unmask exceptions, as these may then be taken by the OS unexpectedly. Unfortunately, some firmware has been seen to unmask IRQs (and potentially other maskable exceptions) across runtime services calls, leaving IRQ flags corrupted after returning from a runtime services function call. This may be detected by the IRQ tracing code, but often goes unnoticed, leaving a potentially disastrous bug hidden. This patch detects when the IRQ flags are corrupted by an EFI runtime services call, logging the call and specific corruption to the console. While restoring the expected value of the flags is insufficient to avoid problems, we do so to avoid redundant warnings from elsewhere (e.g. IRQ tracing). The set of bits in flags which we want to check is architecture-specific (e.g. we want to check FIQ on arm64, but not the zero flag on x86), so each arch must provide ARCH_EFI_IRQ_FLAGS_MASK to describe those. In the absence of this mask, the check is a no-op, and we redundantly save the flags twice, but that will be short-lived as subsequent patches will implement this and remove the scaffolding. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/1461614832-17633-37-git-send-email-matt@codeblueprint.co.uk Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-25 14:07:08 -06:00
#include <linux/irqflags.h>
#include <linux/mutex.h>
#include <linux/semaphore.h>
efi/runtime-wrappers: Detect firmware IRQ flag corruption The UEFI spec allows runtime services to be called with interrupts masked or unmasked, and if a runtime service function needs to mask interrupts, it must restore the mask to its original state before returning (i.e. from the PoV of the OS, this does not change across a call). Firmware should never unmask exceptions, as these may then be taken by the OS unexpectedly. Unfortunately, some firmware has been seen to unmask IRQs (and potentially other maskable exceptions) across runtime services calls, leaving IRQ flags corrupted after returning from a runtime services function call. This may be detected by the IRQ tracing code, but often goes unnoticed, leaving a potentially disastrous bug hidden. This patch detects when the IRQ flags are corrupted by an EFI runtime services call, logging the call and specific corruption to the console. While restoring the expected value of the flags is insufficient to avoid problems, we do so to avoid redundant warnings from elsewhere (e.g. IRQ tracing). The set of bits in flags which we want to check is architecture-specific (e.g. we want to check FIQ on arm64, but not the zero flag on x86), so each arch must provide ARCH_EFI_IRQ_FLAGS_MASK to describe those. In the absence of this mask, the check is a no-op, and we redundantly save the flags twice, but that will be short-lived as subsequent patches will implement this and remove the scaffolding. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/1461614832-17633-37-git-send-email-matt@codeblueprint.co.uk Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-25 14:07:08 -06:00
#include <linux/stringify.h>
efi: Use a work queue to invoke EFI Runtime Services Presently, when a user process requests the kernel to execute any UEFI runtime service, the kernel temporarily switches to a separate set of page tables that describe the virtual mapping of the UEFI runtime services regions in memory. Since UEFI runtime services are typically invoked with interrupts enabled, any code that may be called during this time, will have an incorrect view of the process's address space. Although it is unusual for code running in interrupt context to make assumptions about the process context it runs in, there are cases (such as the perf subsystem taking samples) where this causes problems. So let's set up a work queue for calling UEFI runtime services, so that the actual calls are made when the work queue items are dispatched by a work queue worker running in a separate kernel thread. Such threads are not expected to have userland mappings in the first place, and so the additional mappings created for the UEFI runtime services can never clash with any. The ResetSystem() runtime service is not covered by the work queue handling, since it is not expected to return, and may be called at a time when the kernel is torn down to the point where we cannot expect work queues to still be operational. The non-blocking variants of SetVariable() and QueryVariableInfo() are also excluded: these are intended to be used from atomic context, which obviously rules out waiting for a completion to be signalled by another thread. Note that these variants are currently only used for UEFI runtime services calls that occur very early in the boot, and for ones that occur in critical conditions, e.g., to flush kernel logs to UEFI variables via efi-pstore. Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> [ardb: exclude ResetSystem() from the workqueue treatment merge from 2 separate patches and rewrite commit log] Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20180711094040.12506-4-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-07-11 03:40:35 -06:00
#include <linux/workqueue.h>
#include <linux/completion.h>
#include <asm/efi.h>
efi: Convert efi_call_virt() to efi_call_virt_pointer() This commit makes a few slight modifications to the efi_call_virt() macro to get it to work with function pointers that are stored in locations other than efi.systab->runtime, and renames the macro to efi_call_virt_pointer(). The majority of the changes here are to pull these macros up into header files so that they can be accessed from outside of drivers/firmware/efi/runtime-wrappers.c. The most significant change not directly related to the code move is to add an extra "p" argument into the appropriate efi_call macros, and use that new argument in place of the, formerly hard-coded, efi.systab->runtime pointer. The last piece of the puzzle was to add an efi_call_virt() macro back into drivers/firmware/efi/runtime-wrappers.c to wrap around the new efi_call_virt_pointer() macro - this was mainly to keep the code from looking too cluttered by adding a bunch of extra references to efi.systab->runtime everywhere. Note that I also broke up the code in the efi_call_virt_pointer() macro a bit in the process of moving it. Signed-off-by: Alex Thorlton <athorlton@sgi.com> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dimitri Sivanich <sivanich@sgi.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roy Franz <roy.franz@linaro.org> Cc: Russ Anderson <rja@sgi.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/1466839230-12781-5-git-send-email-matt@codeblueprint.co.uk Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-25 01:20:27 -06:00
/*
* Wrap around the new efi_call_virt_generic() macros so that the
* code doesn't get too cluttered:
*/
#define efi_call_virt(f, args...) \
efi_call_virt_pointer(efi.systab->runtime, f, args)
#define __efi_call_virt(f, args...) \
__efi_call_virt_pointer(efi.systab->runtime, f, args)
struct efi_runtime_work efi_rts_work;
efi: Use a work queue to invoke EFI Runtime Services Presently, when a user process requests the kernel to execute any UEFI runtime service, the kernel temporarily switches to a separate set of page tables that describe the virtual mapping of the UEFI runtime services regions in memory. Since UEFI runtime services are typically invoked with interrupts enabled, any code that may be called during this time, will have an incorrect view of the process's address space. Although it is unusual for code running in interrupt context to make assumptions about the process context it runs in, there are cases (such as the perf subsystem taking samples) where this causes problems. So let's set up a work queue for calling UEFI runtime services, so that the actual calls are made when the work queue items are dispatched by a work queue worker running in a separate kernel thread. Such threads are not expected to have userland mappings in the first place, and so the additional mappings created for the UEFI runtime services can never clash with any. The ResetSystem() runtime service is not covered by the work queue handling, since it is not expected to return, and may be called at a time when the kernel is torn down to the point where we cannot expect work queues to still be operational. The non-blocking variants of SetVariable() and QueryVariableInfo() are also excluded: these are intended to be used from atomic context, which obviously rules out waiting for a completion to be signalled by another thread. Note that these variants are currently only used for UEFI runtime services calls that occur very early in the boot, and for ones that occur in critical conditions, e.g., to flush kernel logs to UEFI variables via efi-pstore. Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> [ardb: exclude ResetSystem() from the workqueue treatment merge from 2 separate patches and rewrite commit log] Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20180711094040.12506-4-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-07-11 03:40:35 -06:00
/*
* efi_queue_work: Queue efi_runtime_service() and wait until it's done
* @rts: efi_runtime_service() function identifier
* @rts_arg<1-5>: efi_runtime_service() function arguments
*
* Accesses to efi_runtime_services() are serialized by a binary
* semaphore (efi_runtime_lock) and caller waits until the work is
* finished, hence _only_ one work is queued at a time and the caller
* thread waits for completion.
*/
#define efi_queue_work(_rts, _arg1, _arg2, _arg3, _arg4, _arg5) \
({ \
efi_rts_work.status = EFI_ABORTED; \
\
if (!efi_enabled(EFI_RUNTIME_SERVICES)) { \
pr_warn_once("EFI Runtime Services are disabled!\n"); \
goto exit; \
} \
\
efi: Use a work queue to invoke EFI Runtime Services Presently, when a user process requests the kernel to execute any UEFI runtime service, the kernel temporarily switches to a separate set of page tables that describe the virtual mapping of the UEFI runtime services regions in memory. Since UEFI runtime services are typically invoked with interrupts enabled, any code that may be called during this time, will have an incorrect view of the process's address space. Although it is unusual for code running in interrupt context to make assumptions about the process context it runs in, there are cases (such as the perf subsystem taking samples) where this causes problems. So let's set up a work queue for calling UEFI runtime services, so that the actual calls are made when the work queue items are dispatched by a work queue worker running in a separate kernel thread. Such threads are not expected to have userland mappings in the first place, and so the additional mappings created for the UEFI runtime services can never clash with any. The ResetSystem() runtime service is not covered by the work queue handling, since it is not expected to return, and may be called at a time when the kernel is torn down to the point where we cannot expect work queues to still be operational. The non-blocking variants of SetVariable() and QueryVariableInfo() are also excluded: these are intended to be used from atomic context, which obviously rules out waiting for a completion to be signalled by another thread. Note that these variants are currently only used for UEFI runtime services calls that occur very early in the boot, and for ones that occur in critical conditions, e.g., to flush kernel logs to UEFI variables via efi-pstore. Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> [ardb: exclude ResetSystem() from the workqueue treatment merge from 2 separate patches and rewrite commit log] Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20180711094040.12506-4-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-07-11 03:40:35 -06:00
init_completion(&efi_rts_work.efi_rts_comp); \
INIT_WORK(&efi_rts_work.work, efi_call_rts); \
efi: Use a work queue to invoke EFI Runtime Services Presently, when a user process requests the kernel to execute any UEFI runtime service, the kernel temporarily switches to a separate set of page tables that describe the virtual mapping of the UEFI runtime services regions in memory. Since UEFI runtime services are typically invoked with interrupts enabled, any code that may be called during this time, will have an incorrect view of the process's address space. Although it is unusual for code running in interrupt context to make assumptions about the process context it runs in, there are cases (such as the perf subsystem taking samples) where this causes problems. So let's set up a work queue for calling UEFI runtime services, so that the actual calls are made when the work queue items are dispatched by a work queue worker running in a separate kernel thread. Such threads are not expected to have userland mappings in the first place, and so the additional mappings created for the UEFI runtime services can never clash with any. The ResetSystem() runtime service is not covered by the work queue handling, since it is not expected to return, and may be called at a time when the kernel is torn down to the point where we cannot expect work queues to still be operational. The non-blocking variants of SetVariable() and QueryVariableInfo() are also excluded: these are intended to be used from atomic context, which obviously rules out waiting for a completion to be signalled by another thread. Note that these variants are currently only used for UEFI runtime services calls that occur very early in the boot, and for ones that occur in critical conditions, e.g., to flush kernel logs to UEFI variables via efi-pstore. Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> [ardb: exclude ResetSystem() from the workqueue treatment merge from 2 separate patches and rewrite commit log] Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20180711094040.12506-4-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-07-11 03:40:35 -06:00
efi_rts_work.arg1 = _arg1; \
efi_rts_work.arg2 = _arg2; \
efi_rts_work.arg3 = _arg3; \
efi_rts_work.arg4 = _arg4; \
efi_rts_work.arg5 = _arg5; \
efi_rts_work.efi_rts_id = _rts; \
\
/* \
* queue_work() returns 0 if work was already on queue, \
* _ideally_ this should never happen. \
*/ \
if (queue_work(efi_rts_wq, &efi_rts_work.work)) \
wait_for_completion(&efi_rts_work.efi_rts_comp); \
else \
pr_err("Failed to queue work to efi_rts_wq.\n"); \
\
exit: \
efi_rts_work.efi_rts_id = EFI_NONE; \
efi: Use a work queue to invoke EFI Runtime Services Presently, when a user process requests the kernel to execute any UEFI runtime service, the kernel temporarily switches to a separate set of page tables that describe the virtual mapping of the UEFI runtime services regions in memory. Since UEFI runtime services are typically invoked with interrupts enabled, any code that may be called during this time, will have an incorrect view of the process's address space. Although it is unusual for code running in interrupt context to make assumptions about the process context it runs in, there are cases (such as the perf subsystem taking samples) where this causes problems. So let's set up a work queue for calling UEFI runtime services, so that the actual calls are made when the work queue items are dispatched by a work queue worker running in a separate kernel thread. Such threads are not expected to have userland mappings in the first place, and so the additional mappings created for the UEFI runtime services can never clash with any. The ResetSystem() runtime service is not covered by the work queue handling, since it is not expected to return, and may be called at a time when the kernel is torn down to the point where we cannot expect work queues to still be operational. The non-blocking variants of SetVariable() and QueryVariableInfo() are also excluded: these are intended to be used from atomic context, which obviously rules out waiting for a completion to be signalled by another thread. Note that these variants are currently only used for UEFI runtime services calls that occur very early in the boot, and for ones that occur in critical conditions, e.g., to flush kernel logs to UEFI variables via efi-pstore. Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> [ardb: exclude ResetSystem() from the workqueue treatment merge from 2 separate patches and rewrite commit log] Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20180711094040.12506-4-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-07-11 03:40:35 -06:00
efi_rts_work.status; \
})
#ifndef arch_efi_save_flags
#define arch_efi_save_flags(state_flags) local_save_flags(state_flags)
#define arch_efi_restore_flags(state_flags) local_irq_restore(state_flags)
#endif
unsigned long efi_call_virt_save_flags(void)
{
unsigned long flags;
arch_efi_save_flags(flags);
return flags;
}
efi: Convert efi_call_virt() to efi_call_virt_pointer() This commit makes a few slight modifications to the efi_call_virt() macro to get it to work with function pointers that are stored in locations other than efi.systab->runtime, and renames the macro to efi_call_virt_pointer(). The majority of the changes here are to pull these macros up into header files so that they can be accessed from outside of drivers/firmware/efi/runtime-wrappers.c. The most significant change not directly related to the code move is to add an extra "p" argument into the appropriate efi_call macros, and use that new argument in place of the, formerly hard-coded, efi.systab->runtime pointer. The last piece of the puzzle was to add an efi_call_virt() macro back into drivers/firmware/efi/runtime-wrappers.c to wrap around the new efi_call_virt_pointer() macro - this was mainly to keep the code from looking too cluttered by adding a bunch of extra references to efi.systab->runtime everywhere. Note that I also broke up the code in the efi_call_virt_pointer() macro a bit in the process of moving it. Signed-off-by: Alex Thorlton <athorlton@sgi.com> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dimitri Sivanich <sivanich@sgi.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roy Franz <roy.franz@linaro.org> Cc: Russ Anderson <rja@sgi.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/1466839230-12781-5-git-send-email-matt@codeblueprint.co.uk Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-25 01:20:27 -06:00
void efi_call_virt_check_flags(unsigned long flags, const char *call)
efi/runtime-wrappers: Detect firmware IRQ flag corruption The UEFI spec allows runtime services to be called with interrupts masked or unmasked, and if a runtime service function needs to mask interrupts, it must restore the mask to its original state before returning (i.e. from the PoV of the OS, this does not change across a call). Firmware should never unmask exceptions, as these may then be taken by the OS unexpectedly. Unfortunately, some firmware has been seen to unmask IRQs (and potentially other maskable exceptions) across runtime services calls, leaving IRQ flags corrupted after returning from a runtime services function call. This may be detected by the IRQ tracing code, but often goes unnoticed, leaving a potentially disastrous bug hidden. This patch detects when the IRQ flags are corrupted by an EFI runtime services call, logging the call and specific corruption to the console. While restoring the expected value of the flags is insufficient to avoid problems, we do so to avoid redundant warnings from elsewhere (e.g. IRQ tracing). The set of bits in flags which we want to check is architecture-specific (e.g. we want to check FIQ on arm64, but not the zero flag on x86), so each arch must provide ARCH_EFI_IRQ_FLAGS_MASK to describe those. In the absence of this mask, the check is a no-op, and we redundantly save the flags twice, but that will be short-lived as subsequent patches will implement this and remove the scaffolding. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/1461614832-17633-37-git-send-email-matt@codeblueprint.co.uk Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-25 14:07:08 -06:00
{
unsigned long cur_flags, mismatch;
cur_flags = efi_call_virt_save_flags();
efi/runtime-wrappers: Detect firmware IRQ flag corruption The UEFI spec allows runtime services to be called with interrupts masked or unmasked, and if a runtime service function needs to mask interrupts, it must restore the mask to its original state before returning (i.e. from the PoV of the OS, this does not change across a call). Firmware should never unmask exceptions, as these may then be taken by the OS unexpectedly. Unfortunately, some firmware has been seen to unmask IRQs (and potentially other maskable exceptions) across runtime services calls, leaving IRQ flags corrupted after returning from a runtime services function call. This may be detected by the IRQ tracing code, but often goes unnoticed, leaving a potentially disastrous bug hidden. This patch detects when the IRQ flags are corrupted by an EFI runtime services call, logging the call and specific corruption to the console. While restoring the expected value of the flags is insufficient to avoid problems, we do so to avoid redundant warnings from elsewhere (e.g. IRQ tracing). The set of bits in flags which we want to check is architecture-specific (e.g. we want to check FIQ on arm64, but not the zero flag on x86), so each arch must provide ARCH_EFI_IRQ_FLAGS_MASK to describe those. In the absence of this mask, the check is a no-op, and we redundantly save the flags twice, but that will be short-lived as subsequent patches will implement this and remove the scaffolding. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/1461614832-17633-37-git-send-email-matt@codeblueprint.co.uk Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-25 14:07:08 -06:00
mismatch = flags ^ cur_flags;
if (!WARN_ON_ONCE(mismatch & ARCH_EFI_IRQ_FLAGS_MASK))
return;
add_taint(TAINT_FIRMWARE_WORKAROUND, LOCKDEP_NOW_UNRELIABLE);
pr_err_ratelimited(FW_BUG "IRQ flags corrupted (0x%08lx=>0x%08lx) by EFI %s\n",
flags, cur_flags, call);
arch_efi_restore_flags(flags);
efi/runtime-wrappers: Detect firmware IRQ flag corruption The UEFI spec allows runtime services to be called with interrupts masked or unmasked, and if a runtime service function needs to mask interrupts, it must restore the mask to its original state before returning (i.e. from the PoV of the OS, this does not change across a call). Firmware should never unmask exceptions, as these may then be taken by the OS unexpectedly. Unfortunately, some firmware has been seen to unmask IRQs (and potentially other maskable exceptions) across runtime services calls, leaving IRQ flags corrupted after returning from a runtime services function call. This may be detected by the IRQ tracing code, but often goes unnoticed, leaving a potentially disastrous bug hidden. This patch detects when the IRQ flags are corrupted by an EFI runtime services call, logging the call and specific corruption to the console. While restoring the expected value of the flags is insufficient to avoid problems, we do so to avoid redundant warnings from elsewhere (e.g. IRQ tracing). The set of bits in flags which we want to check is architecture-specific (e.g. we want to check FIQ on arm64, but not the zero flag on x86), so each arch must provide ARCH_EFI_IRQ_FLAGS_MASK to describe those. In the absence of this mask, the check is a no-op, and we redundantly save the flags twice, but that will be short-lived as subsequent patches will implement this and remove the scaffolding. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/1461614832-17633-37-git-send-email-matt@codeblueprint.co.uk Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-25 14:07:08 -06:00
}
/*
* According to section 7.1 of the UEFI spec, Runtime Services are not fully
* reentrant, and there are particular combinations of calls that need to be
* serialized. (source: UEFI Specification v2.4A)
*
* Table 31. Rules for Reentry Into Runtime Services
* +------------------------------------+-------------------------------+
* | If previous call is busy in | Forbidden to call |
* +------------------------------------+-------------------------------+
* | Any | SetVirtualAddressMap() |
* +------------------------------------+-------------------------------+
* | ConvertPointer() | ConvertPointer() |
* +------------------------------------+-------------------------------+
* | SetVariable() | ResetSystem() |
* | UpdateCapsule() | |
* | SetTime() | |
* | SetWakeupTime() | |
* | GetNextHighMonotonicCount() | |
* +------------------------------------+-------------------------------+
* | GetVariable() | GetVariable() |
* | GetNextVariableName() | GetNextVariableName() |
* | SetVariable() | SetVariable() |
* | QueryVariableInfo() | QueryVariableInfo() |
* | UpdateCapsule() | UpdateCapsule() |
* | QueryCapsuleCapabilities() | QueryCapsuleCapabilities() |
* | GetNextHighMonotonicCount() | GetNextHighMonotonicCount() |
* +------------------------------------+-------------------------------+
* | GetTime() | GetTime() |
* | SetTime() | SetTime() |
* | GetWakeupTime() | GetWakeupTime() |
* | SetWakeupTime() | SetWakeupTime() |
* +------------------------------------+-------------------------------+
*
* Due to the fact that the EFI pstore may write to the variable store in
* interrupt context, we need to use a lock for at least the groups that
* contain SetVariable() and QueryVariableInfo(). That leaves little else, as
* none of the remaining functions are actually ever called at runtime.
* So let's just use a single lock to serialize all Runtime Services calls.
*/
static DEFINE_SEMAPHORE(efi_runtime_lock);
/*
* Expose the EFI runtime lock to the UV platform
*/
#ifdef CONFIG_X86_UV
extern struct semaphore __efi_uv_runtime_lock __alias(efi_runtime_lock);
#endif
efi: Use a work queue to invoke EFI Runtime Services Presently, when a user process requests the kernel to execute any UEFI runtime service, the kernel temporarily switches to a separate set of page tables that describe the virtual mapping of the UEFI runtime services regions in memory. Since UEFI runtime services are typically invoked with interrupts enabled, any code that may be called during this time, will have an incorrect view of the process's address space. Although it is unusual for code running in interrupt context to make assumptions about the process context it runs in, there are cases (such as the perf subsystem taking samples) where this causes problems. So let's set up a work queue for calling UEFI runtime services, so that the actual calls are made when the work queue items are dispatched by a work queue worker running in a separate kernel thread. Such threads are not expected to have userland mappings in the first place, and so the additional mappings created for the UEFI runtime services can never clash with any. The ResetSystem() runtime service is not covered by the work queue handling, since it is not expected to return, and may be called at a time when the kernel is torn down to the point where we cannot expect work queues to still be operational. The non-blocking variants of SetVariable() and QueryVariableInfo() are also excluded: these are intended to be used from atomic context, which obviously rules out waiting for a completion to be signalled by another thread. Note that these variants are currently only used for UEFI runtime services calls that occur very early in the boot, and for ones that occur in critical conditions, e.g., to flush kernel logs to UEFI variables via efi-pstore. Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> [ardb: exclude ResetSystem() from the workqueue treatment merge from 2 separate patches and rewrite commit log] Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20180711094040.12506-4-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-07-11 03:40:35 -06:00
/*
* Calls the appropriate efi_runtime_service() with the appropriate
* arguments.
*
* Semantics followed by efi_call_rts() to understand efi_runtime_work:
* 1. If argument was a pointer, recast it from void pointer to original
* pointer type.
* 2. If argument was a value, recast it from void pointer to original
* pointer type and dereference it.
*/
static void efi_call_rts(struct work_struct *work)
{
void *arg1, *arg2, *arg3, *arg4, *arg5;
efi_status_t status = EFI_NOT_FOUND;
arg1 = efi_rts_work.arg1;
arg2 = efi_rts_work.arg2;
arg3 = efi_rts_work.arg3;
arg4 = efi_rts_work.arg4;
arg5 = efi_rts_work.arg5;
efi: Use a work queue to invoke EFI Runtime Services Presently, when a user process requests the kernel to execute any UEFI runtime service, the kernel temporarily switches to a separate set of page tables that describe the virtual mapping of the UEFI runtime services regions in memory. Since UEFI runtime services are typically invoked with interrupts enabled, any code that may be called during this time, will have an incorrect view of the process's address space. Although it is unusual for code running in interrupt context to make assumptions about the process context it runs in, there are cases (such as the perf subsystem taking samples) where this causes problems. So let's set up a work queue for calling UEFI runtime services, so that the actual calls are made when the work queue items are dispatched by a work queue worker running in a separate kernel thread. Such threads are not expected to have userland mappings in the first place, and so the additional mappings created for the UEFI runtime services can never clash with any. The ResetSystem() runtime service is not covered by the work queue handling, since it is not expected to return, and may be called at a time when the kernel is torn down to the point where we cannot expect work queues to still be operational. The non-blocking variants of SetVariable() and QueryVariableInfo() are also excluded: these are intended to be used from atomic context, which obviously rules out waiting for a completion to be signalled by another thread. Note that these variants are currently only used for UEFI runtime services calls that occur very early in the boot, and for ones that occur in critical conditions, e.g., to flush kernel logs to UEFI variables via efi-pstore. Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> [ardb: exclude ResetSystem() from the workqueue treatment merge from 2 separate patches and rewrite commit log] Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20180711094040.12506-4-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-07-11 03:40:35 -06:00
switch (efi_rts_work.efi_rts_id) {
case EFI_GET_TIME:
efi: Use a work queue to invoke EFI Runtime Services Presently, when a user process requests the kernel to execute any UEFI runtime service, the kernel temporarily switches to a separate set of page tables that describe the virtual mapping of the UEFI runtime services regions in memory. Since UEFI runtime services are typically invoked with interrupts enabled, any code that may be called during this time, will have an incorrect view of the process's address space. Although it is unusual for code running in interrupt context to make assumptions about the process context it runs in, there are cases (such as the perf subsystem taking samples) where this causes problems. So let's set up a work queue for calling UEFI runtime services, so that the actual calls are made when the work queue items are dispatched by a work queue worker running in a separate kernel thread. Such threads are not expected to have userland mappings in the first place, and so the additional mappings created for the UEFI runtime services can never clash with any. The ResetSystem() runtime service is not covered by the work queue handling, since it is not expected to return, and may be called at a time when the kernel is torn down to the point where we cannot expect work queues to still be operational. The non-blocking variants of SetVariable() and QueryVariableInfo() are also excluded: these are intended to be used from atomic context, which obviously rules out waiting for a completion to be signalled by another thread. Note that these variants are currently only used for UEFI runtime services calls that occur very early in the boot, and for ones that occur in critical conditions, e.g., to flush kernel logs to UEFI variables via efi-pstore. Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> [ardb: exclude ResetSystem() from the workqueue treatment merge from 2 separate patches and rewrite commit log] Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20180711094040.12506-4-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-07-11 03:40:35 -06:00
status = efi_call_virt(get_time, (efi_time_t *)arg1,
(efi_time_cap_t *)arg2);
break;
case EFI_SET_TIME:
efi: Use a work queue to invoke EFI Runtime Services Presently, when a user process requests the kernel to execute any UEFI runtime service, the kernel temporarily switches to a separate set of page tables that describe the virtual mapping of the UEFI runtime services regions in memory. Since UEFI runtime services are typically invoked with interrupts enabled, any code that may be called during this time, will have an incorrect view of the process's address space. Although it is unusual for code running in interrupt context to make assumptions about the process context it runs in, there are cases (such as the perf subsystem taking samples) where this causes problems. So let's set up a work queue for calling UEFI runtime services, so that the actual calls are made when the work queue items are dispatched by a work queue worker running in a separate kernel thread. Such threads are not expected to have userland mappings in the first place, and so the additional mappings created for the UEFI runtime services can never clash with any. The ResetSystem() runtime service is not covered by the work queue handling, since it is not expected to return, and may be called at a time when the kernel is torn down to the point where we cannot expect work queues to still be operational. The non-blocking variants of SetVariable() and QueryVariableInfo() are also excluded: these are intended to be used from atomic context, which obviously rules out waiting for a completion to be signalled by another thread. Note that these variants are currently only used for UEFI runtime services calls that occur very early in the boot, and for ones that occur in critical conditions, e.g., to flush kernel logs to UEFI variables via efi-pstore. Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> [ardb: exclude ResetSystem() from the workqueue treatment merge from 2 separate patches and rewrite commit log] Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20180711094040.12506-4-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-07-11 03:40:35 -06:00
status = efi_call_virt(set_time, (efi_time_t *)arg1);
break;
case EFI_GET_WAKEUP_TIME:
efi: Use a work queue to invoke EFI Runtime Services Presently, when a user process requests the kernel to execute any UEFI runtime service, the kernel temporarily switches to a separate set of page tables that describe the virtual mapping of the UEFI runtime services regions in memory. Since UEFI runtime services are typically invoked with interrupts enabled, any code that may be called during this time, will have an incorrect view of the process's address space. Although it is unusual for code running in interrupt context to make assumptions about the process context it runs in, there are cases (such as the perf subsystem taking samples) where this causes problems. So let's set up a work queue for calling UEFI runtime services, so that the actual calls are made when the work queue items are dispatched by a work queue worker running in a separate kernel thread. Such threads are not expected to have userland mappings in the first place, and so the additional mappings created for the UEFI runtime services can never clash with any. The ResetSystem() runtime service is not covered by the work queue handling, since it is not expected to return, and may be called at a time when the kernel is torn down to the point where we cannot expect work queues to still be operational. The non-blocking variants of SetVariable() and QueryVariableInfo() are also excluded: these are intended to be used from atomic context, which obviously rules out waiting for a completion to be signalled by another thread. Note that these variants are currently only used for UEFI runtime services calls that occur very early in the boot, and for ones that occur in critical conditions, e.g., to flush kernel logs to UEFI variables via efi-pstore. Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> [ardb: exclude ResetSystem() from the workqueue treatment merge from 2 separate patches and rewrite commit log] Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20180711094040.12506-4-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-07-11 03:40:35 -06:00
status = efi_call_virt(get_wakeup_time, (efi_bool_t *)arg1,
(efi_bool_t *)arg2, (efi_time_t *)arg3);
break;
case EFI_SET_WAKEUP_TIME:
efi: Use a work queue to invoke EFI Runtime Services Presently, when a user process requests the kernel to execute any UEFI runtime service, the kernel temporarily switches to a separate set of page tables that describe the virtual mapping of the UEFI runtime services regions in memory. Since UEFI runtime services are typically invoked with interrupts enabled, any code that may be called during this time, will have an incorrect view of the process's address space. Although it is unusual for code running in interrupt context to make assumptions about the process context it runs in, there are cases (such as the perf subsystem taking samples) where this causes problems. So let's set up a work queue for calling UEFI runtime services, so that the actual calls are made when the work queue items are dispatched by a work queue worker running in a separate kernel thread. Such threads are not expected to have userland mappings in the first place, and so the additional mappings created for the UEFI runtime services can never clash with any. The ResetSystem() runtime service is not covered by the work queue handling, since it is not expected to return, and may be called at a time when the kernel is torn down to the point where we cannot expect work queues to still be operational. The non-blocking variants of SetVariable() and QueryVariableInfo() are also excluded: these are intended to be used from atomic context, which obviously rules out waiting for a completion to be signalled by another thread. Note that these variants are currently only used for UEFI runtime services calls that occur very early in the boot, and for ones that occur in critical conditions, e.g., to flush kernel logs to UEFI variables via efi-pstore. Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> [ardb: exclude ResetSystem() from the workqueue treatment merge from 2 separate patches and rewrite commit log] Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20180711094040.12506-4-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-07-11 03:40:35 -06:00
status = efi_call_virt(set_wakeup_time, *(efi_bool_t *)arg1,
(efi_time_t *)arg2);
break;
case EFI_GET_VARIABLE:
efi: Use a work queue to invoke EFI Runtime Services Presently, when a user process requests the kernel to execute any UEFI runtime service, the kernel temporarily switches to a separate set of page tables that describe the virtual mapping of the UEFI runtime services regions in memory. Since UEFI runtime services are typically invoked with interrupts enabled, any code that may be called during this time, will have an incorrect view of the process's address space. Although it is unusual for code running in interrupt context to make assumptions about the process context it runs in, there are cases (such as the perf subsystem taking samples) where this causes problems. So let's set up a work queue for calling UEFI runtime services, so that the actual calls are made when the work queue items are dispatched by a work queue worker running in a separate kernel thread. Such threads are not expected to have userland mappings in the first place, and so the additional mappings created for the UEFI runtime services can never clash with any. The ResetSystem() runtime service is not covered by the work queue handling, since it is not expected to return, and may be called at a time when the kernel is torn down to the point where we cannot expect work queues to still be operational. The non-blocking variants of SetVariable() and QueryVariableInfo() are also excluded: these are intended to be used from atomic context, which obviously rules out waiting for a completion to be signalled by another thread. Note that these variants are currently only used for UEFI runtime services calls that occur very early in the boot, and for ones that occur in critical conditions, e.g., to flush kernel logs to UEFI variables via efi-pstore. Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> [ardb: exclude ResetSystem() from the workqueue treatment merge from 2 separate patches and rewrite commit log] Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20180711094040.12506-4-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-07-11 03:40:35 -06:00
status = efi_call_virt(get_variable, (efi_char16_t *)arg1,
(efi_guid_t *)arg2, (u32 *)arg3,
(unsigned long *)arg4, (void *)arg5);
break;
case EFI_GET_NEXT_VARIABLE:
efi: Use a work queue to invoke EFI Runtime Services Presently, when a user process requests the kernel to execute any UEFI runtime service, the kernel temporarily switches to a separate set of page tables that describe the virtual mapping of the UEFI runtime services regions in memory. Since UEFI runtime services are typically invoked with interrupts enabled, any code that may be called during this time, will have an incorrect view of the process's address space. Although it is unusual for code running in interrupt context to make assumptions about the process context it runs in, there are cases (such as the perf subsystem taking samples) where this causes problems. So let's set up a work queue for calling UEFI runtime services, so that the actual calls are made when the work queue items are dispatched by a work queue worker running in a separate kernel thread. Such threads are not expected to have userland mappings in the first place, and so the additional mappings created for the UEFI runtime services can never clash with any. The ResetSystem() runtime service is not covered by the work queue handling, since it is not expected to return, and may be called at a time when the kernel is torn down to the point where we cannot expect work queues to still be operational. The non-blocking variants of SetVariable() and QueryVariableInfo() are also excluded: these are intended to be used from atomic context, which obviously rules out waiting for a completion to be signalled by another thread. Note that these variants are currently only used for UEFI runtime services calls that occur very early in the boot, and for ones that occur in critical conditions, e.g., to flush kernel logs to UEFI variables via efi-pstore. Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> [ardb: exclude ResetSystem() from the workqueue treatment merge from 2 separate patches and rewrite commit log] Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20180711094040.12506-4-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-07-11 03:40:35 -06:00
status = efi_call_virt(get_next_variable, (unsigned long *)arg1,
(efi_char16_t *)arg2,
(efi_guid_t *)arg3);
break;
case EFI_SET_VARIABLE:
efi: Use a work queue to invoke EFI Runtime Services Presently, when a user process requests the kernel to execute any UEFI runtime service, the kernel temporarily switches to a separate set of page tables that describe the virtual mapping of the UEFI runtime services regions in memory. Since UEFI runtime services are typically invoked with interrupts enabled, any code that may be called during this time, will have an incorrect view of the process's address space. Although it is unusual for code running in interrupt context to make assumptions about the process context it runs in, there are cases (such as the perf subsystem taking samples) where this causes problems. So let's set up a work queue for calling UEFI runtime services, so that the actual calls are made when the work queue items are dispatched by a work queue worker running in a separate kernel thread. Such threads are not expected to have userland mappings in the first place, and so the additional mappings created for the UEFI runtime services can never clash with any. The ResetSystem() runtime service is not covered by the work queue handling, since it is not expected to return, and may be called at a time when the kernel is torn down to the point where we cannot expect work queues to still be operational. The non-blocking variants of SetVariable() and QueryVariableInfo() are also excluded: these are intended to be used from atomic context, which obviously rules out waiting for a completion to be signalled by another thread. Note that these variants are currently only used for UEFI runtime services calls that occur very early in the boot, and for ones that occur in critical conditions, e.g., to flush kernel logs to UEFI variables via efi-pstore. Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> [ardb: exclude ResetSystem() from the workqueue treatment merge from 2 separate patches and rewrite commit log] Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20180711094040.12506-4-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-07-11 03:40:35 -06:00
status = efi_call_virt(set_variable, (efi_char16_t *)arg1,
(efi_guid_t *)arg2, *(u32 *)arg3,
*(unsigned long *)arg4, (void *)arg5);
break;
case EFI_QUERY_VARIABLE_INFO:
efi: Use a work queue to invoke EFI Runtime Services Presently, when a user process requests the kernel to execute any UEFI runtime service, the kernel temporarily switches to a separate set of page tables that describe the virtual mapping of the UEFI runtime services regions in memory. Since UEFI runtime services are typically invoked with interrupts enabled, any code that may be called during this time, will have an incorrect view of the process's address space. Although it is unusual for code running in interrupt context to make assumptions about the process context it runs in, there are cases (such as the perf subsystem taking samples) where this causes problems. So let's set up a work queue for calling UEFI runtime services, so that the actual calls are made when the work queue items are dispatched by a work queue worker running in a separate kernel thread. Such threads are not expected to have userland mappings in the first place, and so the additional mappings created for the UEFI runtime services can never clash with any. The ResetSystem() runtime service is not covered by the work queue handling, since it is not expected to return, and may be called at a time when the kernel is torn down to the point where we cannot expect work queues to still be operational. The non-blocking variants of SetVariable() and QueryVariableInfo() are also excluded: these are intended to be used from atomic context, which obviously rules out waiting for a completion to be signalled by another thread. Note that these variants are currently only used for UEFI runtime services calls that occur very early in the boot, and for ones that occur in critical conditions, e.g., to flush kernel logs to UEFI variables via efi-pstore. Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> [ardb: exclude ResetSystem() from the workqueue treatment merge from 2 separate patches and rewrite commit log] Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20180711094040.12506-4-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-07-11 03:40:35 -06:00
status = efi_call_virt(query_variable_info, *(u32 *)arg1,
(u64 *)arg2, (u64 *)arg3, (u64 *)arg4);
break;
case EFI_GET_NEXT_HIGH_MONO_COUNT:
efi: Use a work queue to invoke EFI Runtime Services Presently, when a user process requests the kernel to execute any UEFI runtime service, the kernel temporarily switches to a separate set of page tables that describe the virtual mapping of the UEFI runtime services regions in memory. Since UEFI runtime services are typically invoked with interrupts enabled, any code that may be called during this time, will have an incorrect view of the process's address space. Although it is unusual for code running in interrupt context to make assumptions about the process context it runs in, there are cases (such as the perf subsystem taking samples) where this causes problems. So let's set up a work queue for calling UEFI runtime services, so that the actual calls are made when the work queue items are dispatched by a work queue worker running in a separate kernel thread. Such threads are not expected to have userland mappings in the first place, and so the additional mappings created for the UEFI runtime services can never clash with any. The ResetSystem() runtime service is not covered by the work queue handling, since it is not expected to return, and may be called at a time when the kernel is torn down to the point where we cannot expect work queues to still be operational. The non-blocking variants of SetVariable() and QueryVariableInfo() are also excluded: these are intended to be used from atomic context, which obviously rules out waiting for a completion to be signalled by another thread. Note that these variants are currently only used for UEFI runtime services calls that occur very early in the boot, and for ones that occur in critical conditions, e.g., to flush kernel logs to UEFI variables via efi-pstore. Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> [ardb: exclude ResetSystem() from the workqueue treatment merge from 2 separate patches and rewrite commit log] Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20180711094040.12506-4-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-07-11 03:40:35 -06:00
status = efi_call_virt(get_next_high_mono_count, (u32 *)arg1);
break;
case EFI_UPDATE_CAPSULE:
efi: Use a work queue to invoke EFI Runtime Services Presently, when a user process requests the kernel to execute any UEFI runtime service, the kernel temporarily switches to a separate set of page tables that describe the virtual mapping of the UEFI runtime services regions in memory. Since UEFI runtime services are typically invoked with interrupts enabled, any code that may be called during this time, will have an incorrect view of the process's address space. Although it is unusual for code running in interrupt context to make assumptions about the process context it runs in, there are cases (such as the perf subsystem taking samples) where this causes problems. So let's set up a work queue for calling UEFI runtime services, so that the actual calls are made when the work queue items are dispatched by a work queue worker running in a separate kernel thread. Such threads are not expected to have userland mappings in the first place, and so the additional mappings created for the UEFI runtime services can never clash with any. The ResetSystem() runtime service is not covered by the work queue handling, since it is not expected to return, and may be called at a time when the kernel is torn down to the point where we cannot expect work queues to still be operational. The non-blocking variants of SetVariable() and QueryVariableInfo() are also excluded: these are intended to be used from atomic context, which obviously rules out waiting for a completion to be signalled by another thread. Note that these variants are currently only used for UEFI runtime services calls that occur very early in the boot, and for ones that occur in critical conditions, e.g., to flush kernel logs to UEFI variables via efi-pstore. Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> [ardb: exclude ResetSystem() from the workqueue treatment merge from 2 separate patches and rewrite commit log] Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20180711094040.12506-4-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-07-11 03:40:35 -06:00
status = efi_call_virt(update_capsule,
(efi_capsule_header_t **)arg1,
*(unsigned long *)arg2,
*(unsigned long *)arg3);
break;
case EFI_QUERY_CAPSULE_CAPS:
efi: Use a work queue to invoke EFI Runtime Services Presently, when a user process requests the kernel to execute any UEFI runtime service, the kernel temporarily switches to a separate set of page tables that describe the virtual mapping of the UEFI runtime services regions in memory. Since UEFI runtime services are typically invoked with interrupts enabled, any code that may be called during this time, will have an incorrect view of the process's address space. Although it is unusual for code running in interrupt context to make assumptions about the process context it runs in, there are cases (such as the perf subsystem taking samples) where this causes problems. So let's set up a work queue for calling UEFI runtime services, so that the actual calls are made when the work queue items are dispatched by a work queue worker running in a separate kernel thread. Such threads are not expected to have userland mappings in the first place, and so the additional mappings created for the UEFI runtime services can never clash with any. The ResetSystem() runtime service is not covered by the work queue handling, since it is not expected to return, and may be called at a time when the kernel is torn down to the point where we cannot expect work queues to still be operational. The non-blocking variants of SetVariable() and QueryVariableInfo() are also excluded: these are intended to be used from atomic context, which obviously rules out waiting for a completion to be signalled by another thread. Note that these variants are currently only used for UEFI runtime services calls that occur very early in the boot, and for ones that occur in critical conditions, e.g., to flush kernel logs to UEFI variables via efi-pstore. Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> [ardb: exclude ResetSystem() from the workqueue treatment merge from 2 separate patches and rewrite commit log] Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20180711094040.12506-4-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-07-11 03:40:35 -06:00
status = efi_call_virt(query_capsule_caps,
(efi_capsule_header_t **)arg1,
*(unsigned long *)arg2, (u64 *)arg3,
(int *)arg4);
break;
default:
/*
* Ideally, we should never reach here because a caller of this
* function should have put the right efi_runtime_service()
* function identifier into efi_rts_work->efi_rts_id
*/
pr_err("Requested executing invalid EFI Runtime Service.\n");
}
efi_rts_work.status = status;
complete(&efi_rts_work.efi_rts_comp);
efi: Use a work queue to invoke EFI Runtime Services Presently, when a user process requests the kernel to execute any UEFI runtime service, the kernel temporarily switches to a separate set of page tables that describe the virtual mapping of the UEFI runtime services regions in memory. Since UEFI runtime services are typically invoked with interrupts enabled, any code that may be called during this time, will have an incorrect view of the process's address space. Although it is unusual for code running in interrupt context to make assumptions about the process context it runs in, there are cases (such as the perf subsystem taking samples) where this causes problems. So let's set up a work queue for calling UEFI runtime services, so that the actual calls are made when the work queue items are dispatched by a work queue worker running in a separate kernel thread. Such threads are not expected to have userland mappings in the first place, and so the additional mappings created for the UEFI runtime services can never clash with any. The ResetSystem() runtime service is not covered by the work queue handling, since it is not expected to return, and may be called at a time when the kernel is torn down to the point where we cannot expect work queues to still be operational. The non-blocking variants of SetVariable() and QueryVariableInfo() are also excluded: these are intended to be used from atomic context, which obviously rules out waiting for a completion to be signalled by another thread. Note that these variants are currently only used for UEFI runtime services calls that occur very early in the boot, and for ones that occur in critical conditions, e.g., to flush kernel logs to UEFI variables via efi-pstore. Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> [ardb: exclude ResetSystem() from the workqueue treatment merge from 2 separate patches and rewrite commit log] Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20180711094040.12506-4-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-07-11 03:40:35 -06:00
}
static efi_status_t virt_efi_get_time(efi_time_t *tm, efi_time_cap_t *tc)
{
efi_status_t status;
if (down_interruptible(&efi_runtime_lock))
return EFI_ABORTED;
status = efi_queue_work(EFI_GET_TIME, tm, tc, NULL, NULL, NULL);
up(&efi_runtime_lock);
return status;
}
static efi_status_t virt_efi_set_time(efi_time_t *tm)
{
efi_status_t status;
if (down_interruptible(&efi_runtime_lock))
return EFI_ABORTED;
status = efi_queue_work(EFI_SET_TIME, tm, NULL, NULL, NULL, NULL);
up(&efi_runtime_lock);
return status;
}
static efi_status_t virt_efi_get_wakeup_time(efi_bool_t *enabled,
efi_bool_t *pending,
efi_time_t *tm)
{
efi_status_t status;
if (down_interruptible(&efi_runtime_lock))
return EFI_ABORTED;
status = efi_queue_work(EFI_GET_WAKEUP_TIME, enabled, pending, tm, NULL,
efi: Use a work queue to invoke EFI Runtime Services Presently, when a user process requests the kernel to execute any UEFI runtime service, the kernel temporarily switches to a separate set of page tables that describe the virtual mapping of the UEFI runtime services regions in memory. Since UEFI runtime services are typically invoked with interrupts enabled, any code that may be called during this time, will have an incorrect view of the process's address space. Although it is unusual for code running in interrupt context to make assumptions about the process context it runs in, there are cases (such as the perf subsystem taking samples) where this causes problems. So let's set up a work queue for calling UEFI runtime services, so that the actual calls are made when the work queue items are dispatched by a work queue worker running in a separate kernel thread. Such threads are not expected to have userland mappings in the first place, and so the additional mappings created for the UEFI runtime services can never clash with any. The ResetSystem() runtime service is not covered by the work queue handling, since it is not expected to return, and may be called at a time when the kernel is torn down to the point where we cannot expect work queues to still be operational. The non-blocking variants of SetVariable() and QueryVariableInfo() are also excluded: these are intended to be used from atomic context, which obviously rules out waiting for a completion to be signalled by another thread. Note that these variants are currently only used for UEFI runtime services calls that occur very early in the boot, and for ones that occur in critical conditions, e.g., to flush kernel logs to UEFI variables via efi-pstore. Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> [ardb: exclude ResetSystem() from the workqueue treatment merge from 2 separate patches and rewrite commit log] Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20180711094040.12506-4-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-07-11 03:40:35 -06:00
NULL);
up(&efi_runtime_lock);
return status;
}
static efi_status_t virt_efi_set_wakeup_time(efi_bool_t enabled, efi_time_t *tm)
{
efi_status_t status;
if (down_interruptible(&efi_runtime_lock))
return EFI_ABORTED;
status = efi_queue_work(EFI_SET_WAKEUP_TIME, &enabled, tm, NULL, NULL,
efi: Use a work queue to invoke EFI Runtime Services Presently, when a user process requests the kernel to execute any UEFI runtime service, the kernel temporarily switches to a separate set of page tables that describe the virtual mapping of the UEFI runtime services regions in memory. Since UEFI runtime services are typically invoked with interrupts enabled, any code that may be called during this time, will have an incorrect view of the process's address space. Although it is unusual for code running in interrupt context to make assumptions about the process context it runs in, there are cases (such as the perf subsystem taking samples) where this causes problems. So let's set up a work queue for calling UEFI runtime services, so that the actual calls are made when the work queue items are dispatched by a work queue worker running in a separate kernel thread. Such threads are not expected to have userland mappings in the first place, and so the additional mappings created for the UEFI runtime services can never clash with any. The ResetSystem() runtime service is not covered by the work queue handling, since it is not expected to return, and may be called at a time when the kernel is torn down to the point where we cannot expect work queues to still be operational. The non-blocking variants of SetVariable() and QueryVariableInfo() are also excluded: these are intended to be used from atomic context, which obviously rules out waiting for a completion to be signalled by another thread. Note that these variants are currently only used for UEFI runtime services calls that occur very early in the boot, and for ones that occur in critical conditions, e.g., to flush kernel logs to UEFI variables via efi-pstore. Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> [ardb: exclude ResetSystem() from the workqueue treatment merge from 2 separate patches and rewrite commit log] Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20180711094040.12506-4-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-07-11 03:40:35 -06:00
NULL);
up(&efi_runtime_lock);
return status;
}
static efi_status_t virt_efi_get_variable(efi_char16_t *name,
efi_guid_t *vendor,
u32 *attr,
unsigned long *data_size,
void *data)
{
efi_status_t status;
if (down_interruptible(&efi_runtime_lock))
return EFI_ABORTED;
status = efi_queue_work(EFI_GET_VARIABLE, name, vendor, attr, data_size,
efi: Use a work queue to invoke EFI Runtime Services Presently, when a user process requests the kernel to execute any UEFI runtime service, the kernel temporarily switches to a separate set of page tables that describe the virtual mapping of the UEFI runtime services regions in memory. Since UEFI runtime services are typically invoked with interrupts enabled, any code that may be called during this time, will have an incorrect view of the process's address space. Although it is unusual for code running in interrupt context to make assumptions about the process context it runs in, there are cases (such as the perf subsystem taking samples) where this causes problems. So let's set up a work queue for calling UEFI runtime services, so that the actual calls are made when the work queue items are dispatched by a work queue worker running in a separate kernel thread. Such threads are not expected to have userland mappings in the first place, and so the additional mappings created for the UEFI runtime services can never clash with any. The ResetSystem() runtime service is not covered by the work queue handling, since it is not expected to return, and may be called at a time when the kernel is torn down to the point where we cannot expect work queues to still be operational. The non-blocking variants of SetVariable() and QueryVariableInfo() are also excluded: these are intended to be used from atomic context, which obviously rules out waiting for a completion to be signalled by another thread. Note that these variants are currently only used for UEFI runtime services calls that occur very early in the boot, and for ones that occur in critical conditions, e.g., to flush kernel logs to UEFI variables via efi-pstore. Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> [ardb: exclude ResetSystem() from the workqueue treatment merge from 2 separate patches and rewrite commit log] Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20180711094040.12506-4-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-07-11 03:40:35 -06:00
data);
up(&efi_runtime_lock);
return status;
}
static efi_status_t virt_efi_get_next_variable(unsigned long *name_size,
efi_char16_t *name,
efi_guid_t *vendor)
{
efi_status_t status;
if (down_interruptible(&efi_runtime_lock))
return EFI_ABORTED;
status = efi_queue_work(EFI_GET_NEXT_VARIABLE, name_size, name, vendor,
efi: Use a work queue to invoke EFI Runtime Services Presently, when a user process requests the kernel to execute any UEFI runtime service, the kernel temporarily switches to a separate set of page tables that describe the virtual mapping of the UEFI runtime services regions in memory. Since UEFI runtime services are typically invoked with interrupts enabled, any code that may be called during this time, will have an incorrect view of the process's address space. Although it is unusual for code running in interrupt context to make assumptions about the process context it runs in, there are cases (such as the perf subsystem taking samples) where this causes problems. So let's set up a work queue for calling UEFI runtime services, so that the actual calls are made when the work queue items are dispatched by a work queue worker running in a separate kernel thread. Such threads are not expected to have userland mappings in the first place, and so the additional mappings created for the UEFI runtime services can never clash with any. The ResetSystem() runtime service is not covered by the work queue handling, since it is not expected to return, and may be called at a time when the kernel is torn down to the point where we cannot expect work queues to still be operational. The non-blocking variants of SetVariable() and QueryVariableInfo() are also excluded: these are intended to be used from atomic context, which obviously rules out waiting for a completion to be signalled by another thread. Note that these variants are currently only used for UEFI runtime services calls that occur very early in the boot, and for ones that occur in critical conditions, e.g., to flush kernel logs to UEFI variables via efi-pstore. Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> [ardb: exclude ResetSystem() from the workqueue treatment merge from 2 separate patches and rewrite commit log] Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20180711094040.12506-4-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-07-11 03:40:35 -06:00
NULL, NULL);
up(&efi_runtime_lock);
return status;
}
static efi_status_t virt_efi_set_variable(efi_char16_t *name,
efi_guid_t *vendor,
u32 attr,
unsigned long data_size,
void *data)
{
efi_status_t status;
if (down_interruptible(&efi_runtime_lock))
return EFI_ABORTED;
status = efi_queue_work(EFI_SET_VARIABLE, name, vendor, &attr, &data_size,
efi: Use a work queue to invoke EFI Runtime Services Presently, when a user process requests the kernel to execute any UEFI runtime service, the kernel temporarily switches to a separate set of page tables that describe the virtual mapping of the UEFI runtime services regions in memory. Since UEFI runtime services are typically invoked with interrupts enabled, any code that may be called during this time, will have an incorrect view of the process's address space. Although it is unusual for code running in interrupt context to make assumptions about the process context it runs in, there are cases (such as the perf subsystem taking samples) where this causes problems. So let's set up a work queue for calling UEFI runtime services, so that the actual calls are made when the work queue items are dispatched by a work queue worker running in a separate kernel thread. Such threads are not expected to have userland mappings in the first place, and so the additional mappings created for the UEFI runtime services can never clash with any. The ResetSystem() runtime service is not covered by the work queue handling, since it is not expected to return, and may be called at a time when the kernel is torn down to the point where we cannot expect work queues to still be operational. The non-blocking variants of SetVariable() and QueryVariableInfo() are also excluded: these are intended to be used from atomic context, which obviously rules out waiting for a completion to be signalled by another thread. Note that these variants are currently only used for UEFI runtime services calls that occur very early in the boot, and for ones that occur in critical conditions, e.g., to flush kernel logs to UEFI variables via efi-pstore. Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> [ardb: exclude ResetSystem() from the workqueue treatment merge from 2 separate patches and rewrite commit log] Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20180711094040.12506-4-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-07-11 03:40:35 -06:00
data);
up(&efi_runtime_lock);
return status;
}
static efi_status_t
virt_efi_set_variable_nonblocking(efi_char16_t *name, efi_guid_t *vendor,
u32 attr, unsigned long data_size,
void *data)
{
efi_status_t status;
if (down_trylock(&efi_runtime_lock))
return EFI_NOT_READY;
status = efi_call_virt(set_variable, name, vendor, attr, data_size,
data);
up(&efi_runtime_lock);
return status;
}
static efi_status_t virt_efi_query_variable_info(u32 attr,
u64 *storage_space,
u64 *remaining_space,
u64 *max_variable_size)
{
efi_status_t status;
if (efi.runtime_version < EFI_2_00_SYSTEM_TABLE_REVISION)
return EFI_UNSUPPORTED;
if (down_interruptible(&efi_runtime_lock))
return EFI_ABORTED;
status = efi_queue_work(EFI_QUERY_VARIABLE_INFO, &attr, storage_space,
efi: Use a work queue to invoke EFI Runtime Services Presently, when a user process requests the kernel to execute any UEFI runtime service, the kernel temporarily switches to a separate set of page tables that describe the virtual mapping of the UEFI runtime services regions in memory. Since UEFI runtime services are typically invoked with interrupts enabled, any code that may be called during this time, will have an incorrect view of the process's address space. Although it is unusual for code running in interrupt context to make assumptions about the process context it runs in, there are cases (such as the perf subsystem taking samples) where this causes problems. So let's set up a work queue for calling UEFI runtime services, so that the actual calls are made when the work queue items are dispatched by a work queue worker running in a separate kernel thread. Such threads are not expected to have userland mappings in the first place, and so the additional mappings created for the UEFI runtime services can never clash with any. The ResetSystem() runtime service is not covered by the work queue handling, since it is not expected to return, and may be called at a time when the kernel is torn down to the point where we cannot expect work queues to still be operational. The non-blocking variants of SetVariable() and QueryVariableInfo() are also excluded: these are intended to be used from atomic context, which obviously rules out waiting for a completion to be signalled by another thread. Note that these variants are currently only used for UEFI runtime services calls that occur very early in the boot, and for ones that occur in critical conditions, e.g., to flush kernel logs to UEFI variables via efi-pstore. Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> [ardb: exclude ResetSystem() from the workqueue treatment merge from 2 separate patches and rewrite commit log] Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20180711094040.12506-4-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-07-11 03:40:35 -06:00
remaining_space, max_variable_size, NULL);
up(&efi_runtime_lock);
return status;
}
static efi_status_t
virt_efi_query_variable_info_nonblocking(u32 attr,
u64 *storage_space,
u64 *remaining_space,
u64 *max_variable_size)
{
efi_status_t status;
if (efi.runtime_version < EFI_2_00_SYSTEM_TABLE_REVISION)
return EFI_UNSUPPORTED;
if (down_trylock(&efi_runtime_lock))
return EFI_NOT_READY;
status = efi_call_virt(query_variable_info, attr, storage_space,
remaining_space, max_variable_size);
up(&efi_runtime_lock);
return status;
}
static efi_status_t virt_efi_get_next_high_mono_count(u32 *count)
{
efi_status_t status;
if (down_interruptible(&efi_runtime_lock))
return EFI_ABORTED;
status = efi_queue_work(EFI_GET_NEXT_HIGH_MONO_COUNT, count, NULL, NULL,
efi: Use a work queue to invoke EFI Runtime Services Presently, when a user process requests the kernel to execute any UEFI runtime service, the kernel temporarily switches to a separate set of page tables that describe the virtual mapping of the UEFI runtime services regions in memory. Since UEFI runtime services are typically invoked with interrupts enabled, any code that may be called during this time, will have an incorrect view of the process's address space. Although it is unusual for code running in interrupt context to make assumptions about the process context it runs in, there are cases (such as the perf subsystem taking samples) where this causes problems. So let's set up a work queue for calling UEFI runtime services, so that the actual calls are made when the work queue items are dispatched by a work queue worker running in a separate kernel thread. Such threads are not expected to have userland mappings in the first place, and so the additional mappings created for the UEFI runtime services can never clash with any. The ResetSystem() runtime service is not covered by the work queue handling, since it is not expected to return, and may be called at a time when the kernel is torn down to the point where we cannot expect work queues to still be operational. The non-blocking variants of SetVariable() and QueryVariableInfo() are also excluded: these are intended to be used from atomic context, which obviously rules out waiting for a completion to be signalled by another thread. Note that these variants are currently only used for UEFI runtime services calls that occur very early in the boot, and for ones that occur in critical conditions, e.g., to flush kernel logs to UEFI variables via efi-pstore. Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> [ardb: exclude ResetSystem() from the workqueue treatment merge from 2 separate patches and rewrite commit log] Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20180711094040.12506-4-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-07-11 03:40:35 -06:00
NULL, NULL);
up(&efi_runtime_lock);
return status;
}
static void virt_efi_reset_system(int reset_type,
efi_status_t status,
unsigned long data_size,
efi_char16_t *data)
{
if (down_interruptible(&efi_runtime_lock)) {
pr_warn("failed to invoke the reset_system() runtime service:\n"
"could not get exclusive access to the firmware\n");
return;
}
efi_rts_work.efi_rts_id = EFI_RESET_SYSTEM;
__efi_call_virt(reset_system, reset_type, status, data_size, data);
up(&efi_runtime_lock);
}
static efi_status_t virt_efi_update_capsule(efi_capsule_header_t **capsules,
unsigned long count,
unsigned long sg_list)
{
efi_status_t status;
if (efi.runtime_version < EFI_2_00_SYSTEM_TABLE_REVISION)
return EFI_UNSUPPORTED;
if (down_interruptible(&efi_runtime_lock))
return EFI_ABORTED;
status = efi_queue_work(EFI_UPDATE_CAPSULE, capsules, &count, &sg_list,
efi: Use a work queue to invoke EFI Runtime Services Presently, when a user process requests the kernel to execute any UEFI runtime service, the kernel temporarily switches to a separate set of page tables that describe the virtual mapping of the UEFI runtime services regions in memory. Since UEFI runtime services are typically invoked with interrupts enabled, any code that may be called during this time, will have an incorrect view of the process's address space. Although it is unusual for code running in interrupt context to make assumptions about the process context it runs in, there are cases (such as the perf subsystem taking samples) where this causes problems. So let's set up a work queue for calling UEFI runtime services, so that the actual calls are made when the work queue items are dispatched by a work queue worker running in a separate kernel thread. Such threads are not expected to have userland mappings in the first place, and so the additional mappings created for the UEFI runtime services can never clash with any. The ResetSystem() runtime service is not covered by the work queue handling, since it is not expected to return, and may be called at a time when the kernel is torn down to the point where we cannot expect work queues to still be operational. The non-blocking variants of SetVariable() and QueryVariableInfo() are also excluded: these are intended to be used from atomic context, which obviously rules out waiting for a completion to be signalled by another thread. Note that these variants are currently only used for UEFI runtime services calls that occur very early in the boot, and for ones that occur in critical conditions, e.g., to flush kernel logs to UEFI variables via efi-pstore. Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> [ardb: exclude ResetSystem() from the workqueue treatment merge from 2 separate patches and rewrite commit log] Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20180711094040.12506-4-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-07-11 03:40:35 -06:00
NULL, NULL);
up(&efi_runtime_lock);
return status;
}
static efi_status_t virt_efi_query_capsule_caps(efi_capsule_header_t **capsules,
unsigned long count,
u64 *max_size,
int *reset_type)
{
efi_status_t status;
if (efi.runtime_version < EFI_2_00_SYSTEM_TABLE_REVISION)
return EFI_UNSUPPORTED;
if (down_interruptible(&efi_runtime_lock))
return EFI_ABORTED;
status = efi_queue_work(EFI_QUERY_CAPSULE_CAPS, capsules, &count,
efi: Use a work queue to invoke EFI Runtime Services Presently, when a user process requests the kernel to execute any UEFI runtime service, the kernel temporarily switches to a separate set of page tables that describe the virtual mapping of the UEFI runtime services regions in memory. Since UEFI runtime services are typically invoked with interrupts enabled, any code that may be called during this time, will have an incorrect view of the process's address space. Although it is unusual for code running in interrupt context to make assumptions about the process context it runs in, there are cases (such as the perf subsystem taking samples) where this causes problems. So let's set up a work queue for calling UEFI runtime services, so that the actual calls are made when the work queue items are dispatched by a work queue worker running in a separate kernel thread. Such threads are not expected to have userland mappings in the first place, and so the additional mappings created for the UEFI runtime services can never clash with any. The ResetSystem() runtime service is not covered by the work queue handling, since it is not expected to return, and may be called at a time when the kernel is torn down to the point where we cannot expect work queues to still be operational. The non-blocking variants of SetVariable() and QueryVariableInfo() are also excluded: these are intended to be used from atomic context, which obviously rules out waiting for a completion to be signalled by another thread. Note that these variants are currently only used for UEFI runtime services calls that occur very early in the boot, and for ones that occur in critical conditions, e.g., to flush kernel logs to UEFI variables via efi-pstore. Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> [ardb: exclude ResetSystem() from the workqueue treatment merge from 2 separate patches and rewrite commit log] Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20180711094040.12506-4-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-07-11 03:40:35 -06:00
max_size, reset_type, NULL);
up(&efi_runtime_lock);
return status;
}
void efi_native_runtime_setup(void)
{
efi.get_time = virt_efi_get_time;
efi.set_time = virt_efi_set_time;
efi.get_wakeup_time = virt_efi_get_wakeup_time;
efi.set_wakeup_time = virt_efi_set_wakeup_time;
efi.get_variable = virt_efi_get_variable;
efi.get_next_variable = virt_efi_get_next_variable;
efi.set_variable = virt_efi_set_variable;
efi.set_variable_nonblocking = virt_efi_set_variable_nonblocking;
efi.get_next_high_mono_count = virt_efi_get_next_high_mono_count;
efi.reset_system = virt_efi_reset_system;
efi.query_variable_info = virt_efi_query_variable_info;
efi.query_variable_info_nonblocking = virt_efi_query_variable_info_nonblocking;
efi.update_capsule = virt_efi_update_capsule;
efi.query_capsule_caps = virt_efi_query_capsule_caps;
}