1
0
Fork 0
alistair23-linux/drivers/hwmon/k10temp.c

366 lines
10 KiB
C
Raw Permalink Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* k10temp.c - AMD Family 10h/11h/12h/14h/15h/16h processor hardware monitoring
*
* Copyright (c) 2009 Clemens Ladisch <clemens@ladisch.de>
*/
#include <linux/err.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/pci_ids.h>
#include <asm/amd_nb.h>
#include <asm/processor.h>
MODULE_DESCRIPTION("AMD Family 10h+ CPU core temperature monitor");
MODULE_AUTHOR("Clemens Ladisch <clemens@ladisch.de>");
MODULE_LICENSE("GPL");
static bool force;
module_param(force, bool, 0444);
MODULE_PARM_DESC(force, "force loading on processors with erratum 319");
/* Provide lock for writing to NB_SMU_IND_ADDR */
static DEFINE_MUTEX(nb_smu_ind_mutex);
#ifndef PCI_DEVICE_ID_AMD_15H_M70H_NB_F3
#define PCI_DEVICE_ID_AMD_15H_M70H_NB_F3 0x15b3
#endif
/* CPUID function 0x80000001, ebx */
#define CPUID_PKGTYPE_MASK 0xf0000000
#define CPUID_PKGTYPE_F 0x00000000
#define CPUID_PKGTYPE_AM2R2_AM3 0x10000000
/* DRAM controller (PCI function 2) */
#define REG_DCT0_CONFIG_HIGH 0x094
#define DDR3_MODE 0x00000100
/* miscellaneous (PCI function 3) */
#define REG_HARDWARE_THERMAL_CONTROL 0x64
#define HTC_ENABLE 0x00000001
#define REG_REPORTED_TEMPERATURE 0xa4
#define REG_NORTHBRIDGE_CAPABILITIES 0xe8
#define NB_CAP_HTC 0x00000400
/*
* For F15h M60h and M70h, REG_HARDWARE_THERMAL_CONTROL
* and REG_REPORTED_TEMPERATURE have been moved to
* D0F0xBC_xD820_0C64 [Hardware Temperature Control]
* D0F0xBC_xD820_0CA4 [Reported Temperature Control]
*/
#define F15H_M60H_HARDWARE_TEMP_CTRL_OFFSET 0xd8200c64
#define F15H_M60H_REPORTED_TEMP_CTRL_OFFSET 0xd8200ca4
/* F17h M01h Access througn SMN */
#define F17H_M01H_REPORTED_TEMP_CTRL_OFFSET 0x00059800
struct k10temp_data {
struct pci_dev *pdev;
void (*read_htcreg)(struct pci_dev *pdev, u32 *regval);
void (*read_tempreg)(struct pci_dev *pdev, u32 *regval);
int temp_offset;
u32 temp_adjust_mask;
bool show_tdie;
};
struct tctl_offset {
u8 model;
char const *id;
int offset;
};
static const struct tctl_offset tctl_offset_table[] = {
{ 0x17, "AMD Ryzen 5 1600X", 20000 },
{ 0x17, "AMD Ryzen 7 1700X", 20000 },
{ 0x17, "AMD Ryzen 7 1800X", 20000 },
{ 0x17, "AMD Ryzen 7 2700X", 10000 },
{ 0x17, "AMD Ryzen Threadripper 19", 27000 }, /* 19{00,20,50}X */
{ 0x17, "AMD Ryzen Threadripper 29", 27000 }, /* 29{20,50,70,90}[W]X */
};
static void read_htcreg_pci(struct pci_dev *pdev, u32 *regval)
{
pci_read_config_dword(pdev, REG_HARDWARE_THERMAL_CONTROL, regval);
}
static void read_tempreg_pci(struct pci_dev *pdev, u32 *regval)
{
pci_read_config_dword(pdev, REG_REPORTED_TEMPERATURE, regval);
}
static void amd_nb_index_read(struct pci_dev *pdev, unsigned int devfn,
unsigned int base, int offset, u32 *val)
{
mutex_lock(&nb_smu_ind_mutex);
pci_bus_write_config_dword(pdev->bus, devfn,
base, offset);
pci_bus_read_config_dword(pdev->bus, devfn,
base + 4, val);
mutex_unlock(&nb_smu_ind_mutex);
}
static void read_htcreg_nb_f15(struct pci_dev *pdev, u32 *regval)
{
amd_nb_index_read(pdev, PCI_DEVFN(0, 0), 0xb8,
F15H_M60H_HARDWARE_TEMP_CTRL_OFFSET, regval);
}
static void read_tempreg_nb_f15(struct pci_dev *pdev, u32 *regval)
{
amd_nb_index_read(pdev, PCI_DEVFN(0, 0), 0xb8,
F15H_M60H_REPORTED_TEMP_CTRL_OFFSET, regval);
}
static void read_tempreg_nb_f17(struct pci_dev *pdev, u32 *regval)
{
amd_smn_read(amd_pci_dev_to_node_id(pdev),
F17H_M01H_REPORTED_TEMP_CTRL_OFFSET, regval);
}
static unsigned int get_raw_temp(struct k10temp_data *data)
{
unsigned int temp;
u32 regval;
data->read_tempreg(data->pdev, &regval);
temp = (regval >> 21) * 125;
if (regval & data->temp_adjust_mask)
temp -= 49000;
return temp;
}
static ssize_t temp1_input_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct k10temp_data *data = dev_get_drvdata(dev);
unsigned int temp = get_raw_temp(data);
if (temp > data->temp_offset)
temp -= data->temp_offset;
else
temp = 0;
return sprintf(buf, "%u\n", temp);
}
static ssize_t temp2_input_show(struct device *dev,
struct device_attribute *devattr, char *buf)
{
struct k10temp_data *data = dev_get_drvdata(dev);
unsigned int temp = get_raw_temp(data);
return sprintf(buf, "%u\n", temp);
}
static ssize_t temp_label_show(struct device *dev,
struct device_attribute *devattr, char *buf)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
return sprintf(buf, "%s\n", attr->index ? "Tctl" : "Tdie");
}
static ssize_t temp1_max_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
return sprintf(buf, "%d\n", 70 * 1000);
}
static ssize_t temp_crit_show(struct device *dev,
struct device_attribute *devattr, char *buf)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct k10temp_data *data = dev_get_drvdata(dev);
int show_hyst = attr->index;
u32 regval;
int value;
data->read_htcreg(data->pdev, &regval);
value = ((regval >> 16) & 0x7f) * 500 + 52000;
if (show_hyst)
value -= ((regval >> 24) & 0xf) * 500;
return sprintf(buf, "%d\n", value);
}
static DEVICE_ATTR_RO(temp1_input);
static DEVICE_ATTR_RO(temp1_max);
static SENSOR_DEVICE_ATTR_RO(temp1_crit, temp_crit, 0);
static SENSOR_DEVICE_ATTR_RO(temp1_crit_hyst, temp_crit, 1);
static SENSOR_DEVICE_ATTR_RO(temp1_label, temp_label, 0);
static DEVICE_ATTR_RO(temp2_input);
static SENSOR_DEVICE_ATTR_RO(temp2_label, temp_label, 1);
static umode_t k10temp_is_visible(struct kobject *kobj,
struct attribute *attr, int index)
{
struct device *dev = container_of(kobj, struct device, kobj);
struct k10temp_data *data = dev_get_drvdata(dev);
struct pci_dev *pdev = data->pdev;
u32 reg;
switch (index) {
case 0 ... 1: /* temp1_input, temp1_max */
default:
break;
case 2 ... 3: /* temp1_crit, temp1_crit_hyst */
if (!data->read_htcreg)
return 0;
pci_read_config_dword(pdev, REG_NORTHBRIDGE_CAPABILITIES,
&reg);
if (!(reg & NB_CAP_HTC))
return 0;
data->read_htcreg(data->pdev, &reg);
if (!(reg & HTC_ENABLE))
return 0;
break;
case 4 ... 6: /* temp1_label, temp2_input, temp2_label */
if (!data->show_tdie)
return 0;
break;
}
return attr->mode;
}
static struct attribute *k10temp_attrs[] = {
&dev_attr_temp1_input.attr,
&dev_attr_temp1_max.attr,
&sensor_dev_attr_temp1_crit.dev_attr.attr,
&sensor_dev_attr_temp1_crit_hyst.dev_attr.attr,
&sensor_dev_attr_temp1_label.dev_attr.attr,
&dev_attr_temp2_input.attr,
&sensor_dev_attr_temp2_label.dev_attr.attr,
NULL
};
static const struct attribute_group k10temp_group = {
.attrs = k10temp_attrs,
.is_visible = k10temp_is_visible,
};
__ATTRIBUTE_GROUPS(k10temp);
static bool has_erratum_319(struct pci_dev *pdev)
{
u32 pkg_type, reg_dram_cfg;
if (boot_cpu_data.x86 != 0x10)
return false;
/*
* Erratum 319: The thermal sensor of Socket F/AM2+ processors
* may be unreliable.
*/
pkg_type = cpuid_ebx(0x80000001) & CPUID_PKGTYPE_MASK;
if (pkg_type == CPUID_PKGTYPE_F)
return true;
if (pkg_type != CPUID_PKGTYPE_AM2R2_AM3)
return false;
/* DDR3 memory implies socket AM3, which is good */
pci_bus_read_config_dword(pdev->bus,
PCI_DEVFN(PCI_SLOT(pdev->devfn), 2),
REG_DCT0_CONFIG_HIGH, &reg_dram_cfg);
if (reg_dram_cfg & DDR3_MODE)
return false;
/*
* Unfortunately it is possible to run a socket AM3 CPU with DDR2
* memory. We blacklist all the cores which do exist in socket AM2+
* format. It still isn't perfect, as RB-C2 cores exist in both AM2+
* and AM3 formats, but that's the best we can do.
*/
return boot_cpu_data.x86_model < 4 ||
(boot_cpu_data.x86_model == 4 && boot_cpu_data.x86_stepping <= 2);
}
static int k10temp_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
int unreliable = has_erratum_319(pdev);
struct device *dev = &pdev->dev;
struct k10temp_data *data;
struct device *hwmon_dev;
int i;
if (unreliable) {
if (!force) {
dev_err(dev,
"unreliable CPU thermal sensor; monitoring disabled\n");
return -ENODEV;
}
dev_warn(dev,
"unreliable CPU thermal sensor; check erratum 319\n");
}
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
data->pdev = pdev;
if (boot_cpu_data.x86 == 0x15 &&
((boot_cpu_data.x86_model & 0xf0) == 0x60 ||
(boot_cpu_data.x86_model & 0xf0) == 0x70)) {
data->read_htcreg = read_htcreg_nb_f15;
data->read_tempreg = read_tempreg_nb_f15;
} else if (boot_cpu_data.x86 == 0x17 || boot_cpu_data.x86 == 0x18) {
data->temp_adjust_mask = 0x80000;
data->read_tempreg = read_tempreg_nb_f17;
data->show_tdie = true;
} else {
data->read_htcreg = read_htcreg_pci;
data->read_tempreg = read_tempreg_pci;
}
for (i = 0; i < ARRAY_SIZE(tctl_offset_table); i++) {
const struct tctl_offset *entry = &tctl_offset_table[i];
if (boot_cpu_data.x86 == entry->model &&
strstr(boot_cpu_data.x86_model_id, entry->id)) {
data->temp_offset = entry->offset;
break;
}
}
hwmon_dev = devm_hwmon_device_register_with_groups(dev, "k10temp", data,
k10temp_groups);
return PTR_ERR_OR_ZERO(hwmon_dev);
}
static const struct pci_device_id k10temp_id_table[] = {
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC) },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_11H_NB_MISC) },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CNB17H_F3) },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F3) },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M10H_F3) },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M30H_NB_F3) },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M60H_NB_F3) },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M70H_NB_F3) },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_NB_F3) },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_M30H_NB_F3) },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_17H_DF_F3) },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_17H_M10H_DF_F3) },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_17H_M30H_DF_F3) },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_17H_M60H_DF_F3) },
hwmon: (k10temp) Add support for AMD family 17h, model 70h CPUs It would seem like model 70h is behaving in the same way as model 30h, so let's just add the new F3 PCI ID to the list of compatible devices. Unlike previous Ryzen/Threadripper, Ryzen gen 3 processors do not need temperature offsets anymore. This has been reported in the press and verified on my Ryzen 3700X by checking that the idle temperature reported by k10temp is matching the temperature reported by the firmware. Vicki Pfau sent an identical patch after I checked that no-one had written this patch. I would have been happy about dropping my patch but unlike for his patch series, I had already Cc:ed the x86 people and they already reviewed the changes. Since Vicki has not answered to any email after his initial series, let's assume she is on vacation and let's avoid duplication of reviews from the maintainers and merge my series. To acknowledge Vicki's anteriority, I added her S-o-b to the patch. v2, suggested by Guenter Roeck and Brian Woods: - rename from 71h to 70h Signed-off-by: Vicki Pfau <vi@endrift.com> Signed-off-by: Marcel Bocu <marcel.p.bocu@gmail.com> Tested-by: Marcel Bocu <marcel.p.bocu@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Cc: "Woods, Brian" <Brian.Woods@amd.com> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: Jean Delvare <jdelvare@suse.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: linux-hwmon@vger.kernel.org Link: https://lore.kernel.org/r/20190722174653.2391-1-marcel.p.bocu@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-07-22 11:46:53 -06:00
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_17H_M70H_DF_F3) },
{ PCI_VDEVICE(HYGON, PCI_DEVICE_ID_AMD_17H_DF_F3) },
{}
};
MODULE_DEVICE_TABLE(pci, k10temp_id_table);
static struct pci_driver k10temp_driver = {
.name = "k10temp",
.id_table = k10temp_id_table,
.probe = k10temp_probe,
};
module_pci_driver(k10temp_driver);