1
0
Fork 0
alistair23-linux/drivers/mtd/spi-nor/mtk-quadspi.c

563 lines
14 KiB
C
Raw Permalink Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2015 MediaTek Inc.
* Author: Bayi Cheng <bayi.cheng@mediatek.com>
*/
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/iopoll.h>
#include <linux/ioport.h>
#include <linux/math64.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/spi-nor.h>
#define MTK_NOR_CMD_REG 0x00
#define MTK_NOR_CNT_REG 0x04
#define MTK_NOR_RDSR_REG 0x08
#define MTK_NOR_RDATA_REG 0x0c
#define MTK_NOR_RADR0_REG 0x10
#define MTK_NOR_RADR1_REG 0x14
#define MTK_NOR_RADR2_REG 0x18
#define MTK_NOR_WDATA_REG 0x1c
#define MTK_NOR_PRGDATA0_REG 0x20
#define MTK_NOR_PRGDATA1_REG 0x24
#define MTK_NOR_PRGDATA2_REG 0x28
#define MTK_NOR_PRGDATA3_REG 0x2c
#define MTK_NOR_PRGDATA4_REG 0x30
#define MTK_NOR_PRGDATA5_REG 0x34
#define MTK_NOR_SHREG0_REG 0x38
#define MTK_NOR_SHREG1_REG 0x3c
#define MTK_NOR_SHREG2_REG 0x40
#define MTK_NOR_SHREG3_REG 0x44
#define MTK_NOR_SHREG4_REG 0x48
#define MTK_NOR_SHREG5_REG 0x4c
#define MTK_NOR_SHREG6_REG 0x50
#define MTK_NOR_SHREG7_REG 0x54
#define MTK_NOR_SHREG8_REG 0x58
#define MTK_NOR_SHREG9_REG 0x5c
#define MTK_NOR_CFG1_REG 0x60
#define MTK_NOR_CFG2_REG 0x64
#define MTK_NOR_CFG3_REG 0x68
#define MTK_NOR_STATUS0_REG 0x70
#define MTK_NOR_STATUS1_REG 0x74
#define MTK_NOR_STATUS2_REG 0x78
#define MTK_NOR_STATUS3_REG 0x7c
#define MTK_NOR_FLHCFG_REG 0x84
#define MTK_NOR_TIME_REG 0x94
#define MTK_NOR_PP_DATA_REG 0x98
#define MTK_NOR_PREBUF_STUS_REG 0x9c
#define MTK_NOR_DELSEL0_REG 0xa0
#define MTK_NOR_DELSEL1_REG 0xa4
#define MTK_NOR_INTRSTUS_REG 0xa8
#define MTK_NOR_INTREN_REG 0xac
#define MTK_NOR_CHKSUM_CTL_REG 0xb8
#define MTK_NOR_CHKSUM_REG 0xbc
#define MTK_NOR_CMD2_REG 0xc0
#define MTK_NOR_WRPROT_REG 0xc4
#define MTK_NOR_RADR3_REG 0xc8
#define MTK_NOR_DUAL_REG 0xcc
#define MTK_NOR_DELSEL2_REG 0xd0
#define MTK_NOR_DELSEL3_REG 0xd4
#define MTK_NOR_DELSEL4_REG 0xd8
/* commands for mtk nor controller */
#define MTK_NOR_READ_CMD 0x0
#define MTK_NOR_RDSR_CMD 0x2
#define MTK_NOR_PRG_CMD 0x4
#define MTK_NOR_WR_CMD 0x10
#define MTK_NOR_PIO_WR_CMD 0x90
#define MTK_NOR_WRSR_CMD 0x20
#define MTK_NOR_PIO_READ_CMD 0x81
#define MTK_NOR_WR_BUF_ENABLE 0x1
#define MTK_NOR_WR_BUF_DISABLE 0x0
#define MTK_NOR_ENABLE_SF_CMD 0x30
#define MTK_NOR_DUAD_ADDR_EN 0x8
#define MTK_NOR_QUAD_READ_EN 0x4
#define MTK_NOR_DUAL_ADDR_EN 0x2
#define MTK_NOR_DUAL_READ_EN 0x1
#define MTK_NOR_DUAL_DISABLE 0x0
#define MTK_NOR_FAST_READ 0x1
#define SFLASH_WRBUF_SIZE 128
/* Can shift up to 48 bits (6 bytes) of TX/RX */
#define MTK_NOR_MAX_RX_TX_SHIFT 6
/* can shift up to 56 bits (7 bytes) transfer by MTK_NOR_PRG_CMD */
#define MTK_NOR_MAX_SHIFT 7
/* nor controller 4-byte address mode enable bit */
#define MTK_NOR_4B_ADDR_EN BIT(4)
/* Helpers for accessing the program data / shift data registers */
#define MTK_NOR_PRG_REG(n) (MTK_NOR_PRGDATA0_REG + 4 * (n))
#define MTK_NOR_SHREG(n) (MTK_NOR_SHREG0_REG + 4 * (n))
struct mtk_nor {
struct spi_nor nor;
struct device *dev;
void __iomem *base; /* nor flash base address */
struct clk *spi_clk;
struct clk *nor_clk;
};
static void mtk_nor_set_read_mode(struct mtk_nor *mtk_nor)
{
struct spi_nor *nor = &mtk_nor->nor;
mtd: spi-nor: introduce SPI 1-2-2 and SPI 1-4-4 protocols This patch changes the prototype of spi_nor_scan(): its 3rd parameter is replaced by a 'struct spi_nor_hwcaps' pointer, which tells the spi-nor framework about the actual hardware capabilities supported by the SPI controller and its driver. Besides, this patch also introduces a new 'struct spi_nor_flash_parameter' telling the spi-nor framework about the hardware capabilities supported by the SPI flash memory and the associated settings required to use those hardware caps. Then, to improve the readability of spi_nor_scan(), the discovery of the memory settings and the memory initialization are now split into two dedicated functions. 1 - spi_nor_init_params() The spi_nor_init_params() function is responsible for initializing the 'struct spi_nor_flash_parameter'. Currently this structure is filled with legacy values but further patches will allow to override some parameter values dynamically, for instance by reading the JESD216 Serial Flash Discoverable Parameter (SFDP) tables from the SPI memory. The spi_nor_init_params() function only deals with the hardware capabilities of the SPI flash memory: especially it doesn't care about the hardware capabilities supported by the SPI controller. 2 - spi_nor_setup() The second function is called once the 'struct spi_nor_flash_parameter' has been initialized by spi_nor_init_params(). With both 'struct spi_nor_flash_parameter' and 'struct spi_nor_hwcaps', the new argument of spi_nor_scan(), spi_nor_setup() computes the best match between hardware caps supported by both the (Q)SPI memory and controller hence selecting the relevant settings for (Fast) Read and Page Program operations. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Reviewed-by: Marek Vasut <marek.vasut@gmail.com>
2017-04-25 14:08:46 -06:00
switch (nor->read_proto) {
case SNOR_PROTO_1_1_1:
writeb(nor->read_opcode, mtk_nor->base +
MTK_NOR_PRGDATA3_REG);
writeb(MTK_NOR_FAST_READ, mtk_nor->base +
MTK_NOR_CFG1_REG);
break;
mtd: spi-nor: introduce SPI 1-2-2 and SPI 1-4-4 protocols This patch changes the prototype of spi_nor_scan(): its 3rd parameter is replaced by a 'struct spi_nor_hwcaps' pointer, which tells the spi-nor framework about the actual hardware capabilities supported by the SPI controller and its driver. Besides, this patch also introduces a new 'struct spi_nor_flash_parameter' telling the spi-nor framework about the hardware capabilities supported by the SPI flash memory and the associated settings required to use those hardware caps. Then, to improve the readability of spi_nor_scan(), the discovery of the memory settings and the memory initialization are now split into two dedicated functions. 1 - spi_nor_init_params() The spi_nor_init_params() function is responsible for initializing the 'struct spi_nor_flash_parameter'. Currently this structure is filled with legacy values but further patches will allow to override some parameter values dynamically, for instance by reading the JESD216 Serial Flash Discoverable Parameter (SFDP) tables from the SPI memory. The spi_nor_init_params() function only deals with the hardware capabilities of the SPI flash memory: especially it doesn't care about the hardware capabilities supported by the SPI controller. 2 - spi_nor_setup() The second function is called once the 'struct spi_nor_flash_parameter' has been initialized by spi_nor_init_params(). With both 'struct spi_nor_flash_parameter' and 'struct spi_nor_hwcaps', the new argument of spi_nor_scan(), spi_nor_setup() computes the best match between hardware caps supported by both the (Q)SPI memory and controller hence selecting the relevant settings for (Fast) Read and Page Program operations. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Reviewed-by: Marek Vasut <marek.vasut@gmail.com>
2017-04-25 14:08:46 -06:00
case SNOR_PROTO_1_1_2:
writeb(nor->read_opcode, mtk_nor->base +
MTK_NOR_PRGDATA3_REG);
writeb(MTK_NOR_DUAL_READ_EN, mtk_nor->base +
MTK_NOR_DUAL_REG);
break;
mtd: spi-nor: introduce SPI 1-2-2 and SPI 1-4-4 protocols This patch changes the prototype of spi_nor_scan(): its 3rd parameter is replaced by a 'struct spi_nor_hwcaps' pointer, which tells the spi-nor framework about the actual hardware capabilities supported by the SPI controller and its driver. Besides, this patch also introduces a new 'struct spi_nor_flash_parameter' telling the spi-nor framework about the hardware capabilities supported by the SPI flash memory and the associated settings required to use those hardware caps. Then, to improve the readability of spi_nor_scan(), the discovery of the memory settings and the memory initialization are now split into two dedicated functions. 1 - spi_nor_init_params() The spi_nor_init_params() function is responsible for initializing the 'struct spi_nor_flash_parameter'. Currently this structure is filled with legacy values but further patches will allow to override some parameter values dynamically, for instance by reading the JESD216 Serial Flash Discoverable Parameter (SFDP) tables from the SPI memory. The spi_nor_init_params() function only deals with the hardware capabilities of the SPI flash memory: especially it doesn't care about the hardware capabilities supported by the SPI controller. 2 - spi_nor_setup() The second function is called once the 'struct spi_nor_flash_parameter' has been initialized by spi_nor_init_params(). With both 'struct spi_nor_flash_parameter' and 'struct spi_nor_hwcaps', the new argument of spi_nor_scan(), spi_nor_setup() computes the best match between hardware caps supported by both the (Q)SPI memory and controller hence selecting the relevant settings for (Fast) Read and Page Program operations. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Reviewed-by: Marek Vasut <marek.vasut@gmail.com>
2017-04-25 14:08:46 -06:00
case SNOR_PROTO_1_1_4:
writeb(nor->read_opcode, mtk_nor->base +
MTK_NOR_PRGDATA4_REG);
writeb(MTK_NOR_QUAD_READ_EN, mtk_nor->base +
MTK_NOR_DUAL_REG);
break;
default:
writeb(MTK_NOR_DUAL_DISABLE, mtk_nor->base +
MTK_NOR_DUAL_REG);
break;
}
}
static int mtk_nor_execute_cmd(struct mtk_nor *mtk_nor, u8 cmdval)
{
int reg;
u8 val = cmdval & 0x1f;
writeb(cmdval, mtk_nor->base + MTK_NOR_CMD_REG);
return readl_poll_timeout(mtk_nor->base + MTK_NOR_CMD_REG, reg,
!(reg & val), 100, 10000);
}
static int mtk_nor_do_tx_rx(struct mtk_nor *mtk_nor, u8 op,
u8 *tx, int txlen, u8 *rx, int rxlen)
{
int len = 1 + txlen + rxlen;
int i, ret, idx;
if (len > MTK_NOR_MAX_SHIFT)
return -EINVAL;
writeb(len * 8, mtk_nor->base + MTK_NOR_CNT_REG);
/* start at PRGDATA5, go down to PRGDATA0 */
idx = MTK_NOR_MAX_RX_TX_SHIFT - 1;
/* opcode */
writeb(op, mtk_nor->base + MTK_NOR_PRG_REG(idx));
idx--;
/* program TX data */
for (i = 0; i < txlen; i++, idx--)
writeb(tx[i], mtk_nor->base + MTK_NOR_PRG_REG(idx));
/* clear out rest of TX registers */
while (idx >= 0) {
writeb(0, mtk_nor->base + MTK_NOR_PRG_REG(idx));
idx--;
}
ret = mtk_nor_execute_cmd(mtk_nor, MTK_NOR_PRG_CMD);
if (ret)
return ret;
/* restart at first RX byte */
idx = rxlen - 1;
/* read out RX data */
for (i = 0; i < rxlen; i++, idx--)
rx[i] = readb(mtk_nor->base + MTK_NOR_SHREG(idx));
return 0;
}
/* Do a WRSR (Write Status Register) command */
static int mtk_nor_wr_sr(struct mtk_nor *mtk_nor, u8 sr)
{
writeb(sr, mtk_nor->base + MTK_NOR_PRGDATA5_REG);
writeb(8, mtk_nor->base + MTK_NOR_CNT_REG);
return mtk_nor_execute_cmd(mtk_nor, MTK_NOR_WRSR_CMD);
}
static int mtk_nor_write_buffer_enable(struct mtk_nor *mtk_nor)
{
u8 reg;
/* the bit0 of MTK_NOR_CFG2_REG is pre-fetch buffer
* 0: pre-fetch buffer use for read
* 1: pre-fetch buffer use for page program
*/
writel(MTK_NOR_WR_BUF_ENABLE, mtk_nor->base + MTK_NOR_CFG2_REG);
return readb_poll_timeout(mtk_nor->base + MTK_NOR_CFG2_REG, reg,
0x01 == (reg & 0x01), 100, 10000);
}
static int mtk_nor_write_buffer_disable(struct mtk_nor *mtk_nor)
{
u8 reg;
writel(MTK_NOR_WR_BUF_DISABLE, mtk_nor->base + MTK_NOR_CFG2_REG);
return readb_poll_timeout(mtk_nor->base + MTK_NOR_CFG2_REG, reg,
MTK_NOR_WR_BUF_DISABLE == (reg & 0x1), 100,
10000);
}
static void mtk_nor_set_addr_width(struct mtk_nor *mtk_nor)
{
u8 val;
struct spi_nor *nor = &mtk_nor->nor;
val = readb(mtk_nor->base + MTK_NOR_DUAL_REG);
switch (nor->addr_width) {
case 3:
val &= ~MTK_NOR_4B_ADDR_EN;
break;
case 4:
val |= MTK_NOR_4B_ADDR_EN;
break;
default:
dev_warn(mtk_nor->dev, "Unexpected address width %u.\n",
nor->addr_width);
break;
}
writeb(val, mtk_nor->base + MTK_NOR_DUAL_REG);
}
static void mtk_nor_set_addr(struct mtk_nor *mtk_nor, u32 addr)
{
int i;
mtk_nor_set_addr_width(mtk_nor);
for (i = 0; i < 3; i++) {
writeb(addr & 0xff, mtk_nor->base + MTK_NOR_RADR0_REG + i * 4);
addr >>= 8;
}
/* Last register is non-contiguous */
writeb(addr & 0xff, mtk_nor->base + MTK_NOR_RADR3_REG);
}
static ssize_t mtk_nor_read(struct spi_nor *nor, loff_t from, size_t length,
u_char *buffer)
{
int i, ret;
int addr = (int)from;
u8 *buf = (u8 *)buffer;
struct mtk_nor *mtk_nor = nor->priv;
/* set mode for fast read mode ,dual mode or quad mode */
mtk_nor_set_read_mode(mtk_nor);
mtk_nor_set_addr(mtk_nor, addr);
for (i = 0; i < length; i++) {
ret = mtk_nor_execute_cmd(mtk_nor, MTK_NOR_PIO_READ_CMD);
if (ret < 0)
return ret;
buf[i] = readb(mtk_nor->base + MTK_NOR_RDATA_REG);
}
return length;
}
static int mtk_nor_write_single_byte(struct mtk_nor *mtk_nor,
int addr, int length, u8 *data)
{
int i, ret;
mtk_nor_set_addr(mtk_nor, addr);
for (i = 0; i < length; i++) {
writeb(*data++, mtk_nor->base + MTK_NOR_WDATA_REG);
ret = mtk_nor_execute_cmd(mtk_nor, MTK_NOR_PIO_WR_CMD);
if (ret < 0)
return ret;
}
return 0;
}
static int mtk_nor_write_buffer(struct mtk_nor *mtk_nor, int addr,
const u8 *buf)
{
int i, bufidx, data;
mtk_nor_set_addr(mtk_nor, addr);
bufidx = 0;
for (i = 0; i < SFLASH_WRBUF_SIZE; i += 4) {
data = buf[bufidx + 3]<<24 | buf[bufidx + 2]<<16 |
buf[bufidx + 1]<<8 | buf[bufidx];
bufidx += 4;
writel(data, mtk_nor->base + MTK_NOR_PP_DATA_REG);
}
return mtk_nor_execute_cmd(mtk_nor, MTK_NOR_WR_CMD);
}
static ssize_t mtk_nor_write(struct spi_nor *nor, loff_t to, size_t len,
const u_char *buf)
{
int ret;
struct mtk_nor *mtk_nor = nor->priv;
size_t i;
ret = mtk_nor_write_buffer_enable(mtk_nor);
if (ret < 0) {
dev_warn(mtk_nor->dev, "write buffer enable failed!\n");
return ret;
}
for (i = 0; i + SFLASH_WRBUF_SIZE <= len; i += SFLASH_WRBUF_SIZE) {
ret = mtk_nor_write_buffer(mtk_nor, to, buf);
if (ret < 0) {
dev_err(mtk_nor->dev, "write buffer failed!\n");
return ret;
}
to += SFLASH_WRBUF_SIZE;
buf += SFLASH_WRBUF_SIZE;
}
ret = mtk_nor_write_buffer_disable(mtk_nor);
if (ret < 0) {
dev_warn(mtk_nor->dev, "write buffer disable failed!\n");
return ret;
}
if (i < len) {
ret = mtk_nor_write_single_byte(mtk_nor, to,
(int)(len - i), (u8 *)buf);
if (ret < 0) {
dev_err(mtk_nor->dev, "write single byte failed!\n");
return ret;
}
}
return len;
}
static int mtk_nor_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len)
{
int ret;
struct mtk_nor *mtk_nor = nor->priv;
switch (opcode) {
case SPINOR_OP_RDSR:
ret = mtk_nor_execute_cmd(mtk_nor, MTK_NOR_RDSR_CMD);
if (ret < 0)
return ret;
if (len == 1)
*buf = readb(mtk_nor->base + MTK_NOR_RDSR_REG);
else
dev_err(mtk_nor->dev, "len should be 1 for read status!\n");
break;
default:
ret = mtk_nor_do_tx_rx(mtk_nor, opcode, NULL, 0, buf, len);
break;
}
return ret;
}
static int mtk_nor_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf,
int len)
{
int ret;
struct mtk_nor *mtk_nor = nor->priv;
switch (opcode) {
case SPINOR_OP_WRSR:
/* We only handle 1 byte */
ret = mtk_nor_wr_sr(mtk_nor, *buf);
break;
default:
ret = mtk_nor_do_tx_rx(mtk_nor, opcode, buf, len, NULL, 0);
if (ret)
dev_warn(mtk_nor->dev, "write reg failure!\n");
break;
}
return ret;
}
static void mtk_nor_disable_clk(struct mtk_nor *mtk_nor)
{
clk_disable_unprepare(mtk_nor->spi_clk);
clk_disable_unprepare(mtk_nor->nor_clk);
}
static int mtk_nor_enable_clk(struct mtk_nor *mtk_nor)
{
int ret;
ret = clk_prepare_enable(mtk_nor->spi_clk);
if (ret)
return ret;
ret = clk_prepare_enable(mtk_nor->nor_clk);
if (ret) {
clk_disable_unprepare(mtk_nor->spi_clk);
return ret;
}
return 0;
}
static int mtk_nor_init(struct mtk_nor *mtk_nor,
struct device_node *flash_node)
{
mtd: spi-nor: introduce SPI 1-2-2 and SPI 1-4-4 protocols This patch changes the prototype of spi_nor_scan(): its 3rd parameter is replaced by a 'struct spi_nor_hwcaps' pointer, which tells the spi-nor framework about the actual hardware capabilities supported by the SPI controller and its driver. Besides, this patch also introduces a new 'struct spi_nor_flash_parameter' telling the spi-nor framework about the hardware capabilities supported by the SPI flash memory and the associated settings required to use those hardware caps. Then, to improve the readability of spi_nor_scan(), the discovery of the memory settings and the memory initialization are now split into two dedicated functions. 1 - spi_nor_init_params() The spi_nor_init_params() function is responsible for initializing the 'struct spi_nor_flash_parameter'. Currently this structure is filled with legacy values but further patches will allow to override some parameter values dynamically, for instance by reading the JESD216 Serial Flash Discoverable Parameter (SFDP) tables from the SPI memory. The spi_nor_init_params() function only deals with the hardware capabilities of the SPI flash memory: especially it doesn't care about the hardware capabilities supported by the SPI controller. 2 - spi_nor_setup() The second function is called once the 'struct spi_nor_flash_parameter' has been initialized by spi_nor_init_params(). With both 'struct spi_nor_flash_parameter' and 'struct spi_nor_hwcaps', the new argument of spi_nor_scan(), spi_nor_setup() computes the best match between hardware caps supported by both the (Q)SPI memory and controller hence selecting the relevant settings for (Fast) Read and Page Program operations. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Reviewed-by: Marek Vasut <marek.vasut@gmail.com>
2017-04-25 14:08:46 -06:00
const struct spi_nor_hwcaps hwcaps = {
.mask = SNOR_HWCAPS_READ |
SNOR_HWCAPS_READ_FAST |
mtd: spi-nor: introduce SPI 1-2-2 and SPI 1-4-4 protocols This patch changes the prototype of spi_nor_scan(): its 3rd parameter is replaced by a 'struct spi_nor_hwcaps' pointer, which tells the spi-nor framework about the actual hardware capabilities supported by the SPI controller and its driver. Besides, this patch also introduces a new 'struct spi_nor_flash_parameter' telling the spi-nor framework about the hardware capabilities supported by the SPI flash memory and the associated settings required to use those hardware caps. Then, to improve the readability of spi_nor_scan(), the discovery of the memory settings and the memory initialization are now split into two dedicated functions. 1 - spi_nor_init_params() The spi_nor_init_params() function is responsible for initializing the 'struct spi_nor_flash_parameter'. Currently this structure is filled with legacy values but further patches will allow to override some parameter values dynamically, for instance by reading the JESD216 Serial Flash Discoverable Parameter (SFDP) tables from the SPI memory. The spi_nor_init_params() function only deals with the hardware capabilities of the SPI flash memory: especially it doesn't care about the hardware capabilities supported by the SPI controller. 2 - spi_nor_setup() The second function is called once the 'struct spi_nor_flash_parameter' has been initialized by spi_nor_init_params(). With both 'struct spi_nor_flash_parameter' and 'struct spi_nor_hwcaps', the new argument of spi_nor_scan(), spi_nor_setup() computes the best match between hardware caps supported by both the (Q)SPI memory and controller hence selecting the relevant settings for (Fast) Read and Page Program operations. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Reviewed-by: Marek Vasut <marek.vasut@gmail.com>
2017-04-25 14:08:46 -06:00
SNOR_HWCAPS_READ_1_1_2 |
SNOR_HWCAPS_PP,
};
int ret;
struct spi_nor *nor;
/* initialize controller to accept commands */
writel(MTK_NOR_ENABLE_SF_CMD, mtk_nor->base + MTK_NOR_WRPROT_REG);
nor = &mtk_nor->nor;
nor->dev = mtk_nor->dev;
nor->priv = mtk_nor;
spi_nor_set_flash_node(nor, flash_node);
/* fill the hooks to spi nor */
nor->read = mtk_nor_read;
nor->read_reg = mtk_nor_read_reg;
nor->write = mtk_nor_write;
nor->write_reg = mtk_nor_write_reg;
nor->mtd.name = "mtk_nor";
/* initialized with NULL */
mtd: spi-nor: introduce SPI 1-2-2 and SPI 1-4-4 protocols This patch changes the prototype of spi_nor_scan(): its 3rd parameter is replaced by a 'struct spi_nor_hwcaps' pointer, which tells the spi-nor framework about the actual hardware capabilities supported by the SPI controller and its driver. Besides, this patch also introduces a new 'struct spi_nor_flash_parameter' telling the spi-nor framework about the hardware capabilities supported by the SPI flash memory and the associated settings required to use those hardware caps. Then, to improve the readability of spi_nor_scan(), the discovery of the memory settings and the memory initialization are now split into two dedicated functions. 1 - spi_nor_init_params() The spi_nor_init_params() function is responsible for initializing the 'struct spi_nor_flash_parameter'. Currently this structure is filled with legacy values but further patches will allow to override some parameter values dynamically, for instance by reading the JESD216 Serial Flash Discoverable Parameter (SFDP) tables from the SPI memory. The spi_nor_init_params() function only deals with the hardware capabilities of the SPI flash memory: especially it doesn't care about the hardware capabilities supported by the SPI controller. 2 - spi_nor_setup() The second function is called once the 'struct spi_nor_flash_parameter' has been initialized by spi_nor_init_params(). With both 'struct spi_nor_flash_parameter' and 'struct spi_nor_hwcaps', the new argument of spi_nor_scan(), spi_nor_setup() computes the best match between hardware caps supported by both the (Q)SPI memory and controller hence selecting the relevant settings for (Fast) Read and Page Program operations. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Reviewed-by: Marek Vasut <marek.vasut@gmail.com>
2017-04-25 14:08:46 -06:00
ret = spi_nor_scan(nor, NULL, &hwcaps);
if (ret)
return ret;
return mtd_device_register(&nor->mtd, NULL, 0);
}
static int mtk_nor_drv_probe(struct platform_device *pdev)
{
struct device_node *flash_np;
struct resource *res;
int ret;
struct mtk_nor *mtk_nor;
if (!pdev->dev.of_node) {
dev_err(&pdev->dev, "No DT found\n");
return -EINVAL;
}
mtk_nor = devm_kzalloc(&pdev->dev, sizeof(*mtk_nor), GFP_KERNEL);
if (!mtk_nor)
return -ENOMEM;
platform_set_drvdata(pdev, mtk_nor);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
mtk_nor->base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(mtk_nor->base))
return PTR_ERR(mtk_nor->base);
mtk_nor->spi_clk = devm_clk_get(&pdev->dev, "spi");
if (IS_ERR(mtk_nor->spi_clk))
return PTR_ERR(mtk_nor->spi_clk);
mtk_nor->nor_clk = devm_clk_get(&pdev->dev, "sf");
if (IS_ERR(mtk_nor->nor_clk))
return PTR_ERR(mtk_nor->nor_clk);
mtk_nor->dev = &pdev->dev;
ret = mtk_nor_enable_clk(mtk_nor);
if (ret)
return ret;
/* only support one attached flash */
flash_np = of_get_next_available_child(pdev->dev.of_node, NULL);
if (!flash_np) {
dev_err(&pdev->dev, "no SPI flash device to configure\n");
ret = -ENODEV;
goto nor_free;
}
ret = mtk_nor_init(mtk_nor, flash_np);
nor_free:
if (ret)
mtk_nor_disable_clk(mtk_nor);
return ret;
}
static int mtk_nor_drv_remove(struct platform_device *pdev)
{
struct mtk_nor *mtk_nor = platform_get_drvdata(pdev);
mtk_nor_disable_clk(mtk_nor);
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int mtk_nor_suspend(struct device *dev)
{
struct mtk_nor *mtk_nor = dev_get_drvdata(dev);
mtk_nor_disable_clk(mtk_nor);
return 0;
}
static int mtk_nor_resume(struct device *dev)
{
struct mtk_nor *mtk_nor = dev_get_drvdata(dev);
return mtk_nor_enable_clk(mtk_nor);
}
static const struct dev_pm_ops mtk_nor_dev_pm_ops = {
.suspend = mtk_nor_suspend,
.resume = mtk_nor_resume,
};
#define MTK_NOR_DEV_PM_OPS (&mtk_nor_dev_pm_ops)
#else
#define MTK_NOR_DEV_PM_OPS NULL
#endif
static const struct of_device_id mtk_nor_of_ids[] = {
{ .compatible = "mediatek,mt8173-nor"},
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, mtk_nor_of_ids);
static struct platform_driver mtk_nor_driver = {
.probe = mtk_nor_drv_probe,
.remove = mtk_nor_drv_remove,
.driver = {
.name = "mtk-nor",
.pm = MTK_NOR_DEV_PM_OPS,
.of_match_table = mtk_nor_of_ids,
},
};
module_platform_driver(mtk_nor_driver);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("MediaTek SPI NOR Flash Driver");