1
0
Fork 0
alistair23-linux/drivers/scsi/mac_esp.c

461 lines
12 KiB
C
Raw Permalink Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/* mac_esp.c: ESP front-end for Macintosh Quadra systems.
*
* Adapted from jazz_esp.c and the old mac_esp.c.
*
* The pseudo DMA algorithm is based on the one used in NetBSD.
* See sys/arch/mac68k/obio/esp.c for some background information.
*
* Copyright (C) 2007-2008 Finn Thain
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/scatterlist.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/nubus.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 02:04:11 -06:00
#include <linux/slab.h>
#include <asm/irq.h>
#include <asm/dma.h>
#include <asm/macints.h>
#include <asm/macintosh.h>
#include <asm/mac_via.h>
#include <scsi/scsi_host.h>
#include "esp_scsi.h"
#define DRV_MODULE_NAME "mac_esp"
#define PFX DRV_MODULE_NAME ": "
#define DRV_VERSION "1.000"
#define DRV_MODULE_RELDATE "Sept 15, 2007"
#define MAC_ESP_IO_BASE 0x50F00000
#define MAC_ESP_REGS_QUADRA (MAC_ESP_IO_BASE + 0x10000)
#define MAC_ESP_REGS_QUADRA2 (MAC_ESP_IO_BASE + 0xF000)
#define MAC_ESP_REGS_QUADRA3 (MAC_ESP_IO_BASE + 0x18000)
#define MAC_ESP_REGS_SPACING 0x402
#define MAC_ESP_PDMA_REG 0xF9800024
#define MAC_ESP_PDMA_REG_SPACING 0x4
#define MAC_ESP_PDMA_IO_OFFSET 0x100
#define esp_read8(REG) mac_esp_read8(esp, REG)
#define esp_write8(VAL, REG) mac_esp_write8(esp, VAL, REG)
struct mac_esp_priv {
struct esp *esp;
void __iomem *pdma_regs;
void __iomem *pdma_io;
};
static struct esp *esp_chips[2];
static DEFINE_SPINLOCK(esp_chips_lock);
#define MAC_ESP_GET_PRIV(esp) ((struct mac_esp_priv *) \
dev_get_drvdata((esp)->dev))
static inline void mac_esp_write8(struct esp *esp, u8 val, unsigned long reg)
{
nubus_writeb(val, esp->regs + reg * 16);
}
static inline u8 mac_esp_read8(struct esp *esp, unsigned long reg)
{
return nubus_readb(esp->regs + reg * 16);
}
static void mac_esp_reset_dma(struct esp *esp)
{
/* Nothing to do. */
}
static void mac_esp_dma_drain(struct esp *esp)
{
/* Nothing to do. */
}
static void mac_esp_dma_invalidate(struct esp *esp)
{
/* Nothing to do. */
}
static int mac_esp_dma_error(struct esp *esp)
{
return esp->send_cmd_error;
}
static inline int mac_esp_wait_for_empty_fifo(struct esp *esp)
{
int i = 500000;
do {
if (!(esp_read8(ESP_FFLAGS) & ESP_FF_FBYTES))
return 0;
if (esp_read8(ESP_STATUS) & ESP_STAT_INTR)
return 1;
udelay(2);
} while (--i);
printk(KERN_ERR PFX "FIFO is not empty (sreg %02x)\n",
esp_read8(ESP_STATUS));
esp->send_cmd_error = 1;
return 1;
}
static inline int mac_esp_wait_for_dreq(struct esp *esp)
{
struct mac_esp_priv *mep = MAC_ESP_GET_PRIV(esp);
int i = 500000;
do {
if (mep->pdma_regs == NULL) {
if (via2_scsi_drq_pending())
return 0;
} else {
if (nubus_readl(mep->pdma_regs) & 0x200)
return 0;
}
if (esp_read8(ESP_STATUS) & ESP_STAT_INTR)
return 1;
udelay(2);
} while (--i);
printk(KERN_ERR PFX "PDMA timeout (sreg %02x)\n",
esp_read8(ESP_STATUS));
esp->send_cmd_error = 1;
return 1;
}
#define MAC_ESP_PDMA_LOOP(operands) \
asm volatile ( \
" tstw %1 \n" \
" jbeq 20f \n" \
"1: movew " operands " \n" \
"2: movew " operands " \n" \
"3: movew " operands " \n" \
"4: movew " operands " \n" \
"5: movew " operands " \n" \
"6: movew " operands " \n" \
"7: movew " operands " \n" \
"8: movew " operands " \n" \
"9: movew " operands " \n" \
"10: movew " operands " \n" \
"11: movew " operands " \n" \
"12: movew " operands " \n" \
"13: movew " operands " \n" \
"14: movew " operands " \n" \
"15: movew " operands " \n" \
"16: movew " operands " \n" \
" subqw #1,%1 \n" \
" jbne 1b \n" \
"20: tstw %2 \n" \
" jbeq 30f \n" \
"21: movew " operands " \n" \
" subqw #1,%2 \n" \
" jbne 21b \n" \
"30: tstw %3 \n" \
" jbeq 40f \n" \
"31: moveb " operands " \n" \
"32: nop \n" \
"40: \n" \
" \n" \
" .section __ex_table,\"a\" \n" \
" .align 4 \n" \
" .long 1b,40b \n" \
" .long 2b,40b \n" \
" .long 3b,40b \n" \
" .long 4b,40b \n" \
" .long 5b,40b \n" \
" .long 6b,40b \n" \
" .long 7b,40b \n" \
" .long 8b,40b \n" \
" .long 9b,40b \n" \
" .long 10b,40b \n" \
" .long 11b,40b \n" \
" .long 12b,40b \n" \
" .long 13b,40b \n" \
" .long 14b,40b \n" \
" .long 15b,40b \n" \
" .long 16b,40b \n" \
" .long 21b,40b \n" \
" .long 31b,40b \n" \
" .long 32b,40b \n" \
" .previous \n" \
: "+a" (addr), "+r" (count32), "+r" (count2) \
: "g" (count1), "a" (mep->pdma_io))
static void mac_esp_send_pdma_cmd(struct esp *esp, u32 addr, u32 esp_count,
u32 dma_count, int write, u8 cmd)
{
struct mac_esp_priv *mep = MAC_ESP_GET_PRIV(esp);
esp->send_cmd_error = 0;
if (!write)
scsi_esp_cmd(esp, ESP_CMD_FLUSH);
esp_write8((esp_count >> 0) & 0xFF, ESP_TCLOW);
esp_write8((esp_count >> 8) & 0xFF, ESP_TCMED);
scsi_esp_cmd(esp, cmd);
do {
unsigned int count32 = esp_count >> 5;
unsigned int count2 = (esp_count & 0x1F) >> 1;
unsigned int count1 = esp_count & 1;
unsigned int start_addr = addr;
if (mac_esp_wait_for_dreq(esp))
break;
if (write) {
MAC_ESP_PDMA_LOOP("%4@,%0@+");
esp_count -= addr - start_addr;
} else {
unsigned int n;
MAC_ESP_PDMA_LOOP("%0@+,%4@");
if (mac_esp_wait_for_empty_fifo(esp))
break;
n = (esp_read8(ESP_TCMED) << 8) + esp_read8(ESP_TCLOW);
addr = start_addr + esp_count - n;
esp_count = n;
}
} while (esp_count);
}
static int mac_esp_irq_pending(struct esp *esp)
{
if (esp_read8(ESP_STATUS) & ESP_STAT_INTR)
return 1;
return 0;
}
static u32 mac_esp_dma_length_limit(struct esp *esp, u32 dma_addr, u32 dma_len)
{
return dma_len > 0xFFFF ? 0xFFFF : dma_len;
}
static irqreturn_t mac_scsi_esp_intr(int irq, void *dev_id)
{
int got_intr;
/*
* This is an edge triggered IRQ, so we have to be careful to
* avoid missing a transition when it is shared by two ESP devices.
*/
do {
got_intr = 0;
if (esp_chips[0] &&
(mac_esp_read8(esp_chips[0], ESP_STATUS) & ESP_STAT_INTR)) {
(void)scsi_esp_intr(irq, esp_chips[0]);
got_intr = 1;
}
if (esp_chips[1] &&
(mac_esp_read8(esp_chips[1], ESP_STATUS) & ESP_STAT_INTR)) {
(void)scsi_esp_intr(irq, esp_chips[1]);
got_intr = 1;
}
} while (got_intr);
return IRQ_HANDLED;
}
static struct esp_driver_ops mac_esp_ops = {
.esp_write8 = mac_esp_write8,
.esp_read8 = mac_esp_read8,
.irq_pending = mac_esp_irq_pending,
.dma_length_limit = mac_esp_dma_length_limit,
.reset_dma = mac_esp_reset_dma,
.dma_drain = mac_esp_dma_drain,
.dma_invalidate = mac_esp_dma_invalidate,
.send_dma_cmd = mac_esp_send_pdma_cmd,
.dma_error = mac_esp_dma_error,
};
static int esp_mac_probe(struct platform_device *dev)
{
struct scsi_host_template *tpnt = &scsi_esp_template;
struct Scsi_Host *host;
struct esp *esp;
int err;
struct mac_esp_priv *mep;
if (!MACH_IS_MAC)
return -ENODEV;
if (dev->id > 1)
return -ENODEV;
host = scsi_host_alloc(tpnt, sizeof(struct esp));
err = -ENOMEM;
if (!host)
goto fail;
host->max_id = 8;
host->dma_boundary = PAGE_SIZE - 1;
esp = shost_priv(host);
esp->host = host;
esp->dev = &dev->dev;
esp->command_block = kzalloc(16, GFP_KERNEL);
if (!esp->command_block)
goto fail_unlink;
esp->command_block_dma = (dma_addr_t)esp->command_block;
esp->scsi_id = 7;
host->this_id = esp->scsi_id;
esp->scsi_id_mask = 1 << esp->scsi_id;
mep = kzalloc(sizeof(struct mac_esp_priv), GFP_KERNEL);
if (!mep)
goto fail_free_command_block;
mep->esp = esp;
platform_set_drvdata(dev, mep);
switch (macintosh_config->scsi_type) {
case MAC_SCSI_QUADRA:
esp->cfreq = 16500000;
esp->regs = (void __iomem *)MAC_ESP_REGS_QUADRA;
mep->pdma_io = esp->regs + MAC_ESP_PDMA_IO_OFFSET;
mep->pdma_regs = NULL;
break;
case MAC_SCSI_QUADRA2:
esp->cfreq = 25000000;
esp->regs = (void __iomem *)(MAC_ESP_REGS_QUADRA2 +
dev->id * MAC_ESP_REGS_SPACING);
mep->pdma_io = esp->regs + MAC_ESP_PDMA_IO_OFFSET;
mep->pdma_regs = (void __iomem *)(MAC_ESP_PDMA_REG +
dev->id * MAC_ESP_PDMA_REG_SPACING);
nubus_writel(0x1d1, mep->pdma_regs);
break;
case MAC_SCSI_QUADRA3:
/* These quadras have a real DMA controller (the PSC) but we
* don't know how to drive it so we must use PIO instead.
*/
esp->cfreq = 25000000;
esp->regs = (void __iomem *)MAC_ESP_REGS_QUADRA3;
mep->pdma_io = NULL;
mep->pdma_regs = NULL;
break;
}
esp->fifo_reg = esp->regs + ESP_FDATA * 16;
esp->ops = &mac_esp_ops;
esp->flags = ESP_FLAG_NO_DMA_MAP;
if (mep->pdma_io == NULL) {
printk(KERN_INFO PFX "using PIO for controller %d\n", dev->id);
esp_write8(0, ESP_TCLOW);
esp_write8(0, ESP_TCMED);
esp->flags |= ESP_FLAG_DISABLE_SYNC;
mac_esp_ops.send_dma_cmd = esp_send_pio_cmd;
} else {
printk(KERN_INFO PFX "using PDMA for controller %d\n", dev->id);
}
host->irq = IRQ_MAC_SCSI;
/* The request_irq() call is intended to succeed for the first device
* and fail for the second device.
*/
err = request_irq(host->irq, mac_scsi_esp_intr, 0, "ESP", NULL);
spin_lock(&esp_chips_lock);
if (err < 0 && esp_chips[!dev->id] == NULL) {
spin_unlock(&esp_chips_lock);
goto fail_free_priv;
}
esp_chips[dev->id] = esp;
spin_unlock(&esp_chips_lock);
err = scsi_esp_register(esp);
if (err)
goto fail_free_irq;
return 0;
fail_free_irq:
spin_lock(&esp_chips_lock);
esp_chips[dev->id] = NULL;
if (esp_chips[!dev->id] == NULL) {
spin_unlock(&esp_chips_lock);
free_irq(host->irq, NULL);
} else
spin_unlock(&esp_chips_lock);
fail_free_priv:
kfree(mep);
fail_free_command_block:
kfree(esp->command_block);
fail_unlink:
scsi_host_put(host);
fail:
return err;
}
static int esp_mac_remove(struct platform_device *dev)
{
struct mac_esp_priv *mep = platform_get_drvdata(dev);
struct esp *esp = mep->esp;
unsigned int irq = esp->host->irq;
scsi_esp_unregister(esp);
spin_lock(&esp_chips_lock);
esp_chips[dev->id] = NULL;
if (esp_chips[!dev->id] == NULL) {
spin_unlock(&esp_chips_lock);
free_irq(irq, NULL);
} else
spin_unlock(&esp_chips_lock);
kfree(mep);
kfree(esp->command_block);
scsi_host_put(esp->host);
return 0;
}
static struct platform_driver esp_mac_driver = {
.probe = esp_mac_probe,
.remove = esp_mac_remove,
.driver = {
.name = DRV_MODULE_NAME,
},
};
static int __init mac_esp_init(void)
{
return platform_driver_register(&esp_mac_driver);
}
static void __exit mac_esp_exit(void)
{
platform_driver_unregister(&esp_mac_driver);
}
MODULE_DESCRIPTION("Mac ESP SCSI driver");
MODULE_AUTHOR("Finn Thain");
MODULE_LICENSE("GPL v2");
MODULE_VERSION(DRV_VERSION);
MODULE_ALIAS("platform:" DRV_MODULE_NAME);
module_init(mac_esp_init);
module_exit(mac_esp_exit);