1
0
Fork 0
alistair23-linux/drivers/vfio/vfio_iommu_type1.c

1068 lines
27 KiB
C
Raw Normal View History

/*
* VFIO: IOMMU DMA mapping support for Type1 IOMMU
*
* Copyright (C) 2012 Red Hat, Inc. All rights reserved.
* Author: Alex Williamson <alex.williamson@redhat.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Derived from original vfio:
* Copyright 2010 Cisco Systems, Inc. All rights reserved.
* Author: Tom Lyon, pugs@cisco.com
*
* We arbitrarily define a Type1 IOMMU as one matching the below code.
* It could be called the x86 IOMMU as it's designed for AMD-Vi & Intel
* VT-d, but that makes it harder to re-use as theoretically anyone
* implementing a similar IOMMU could make use of this. We expect the
* IOMMU to support the IOMMU API and have few to no restrictions around
* the IOVA range that can be mapped. The Type1 IOMMU is currently
* optimized for relatively static mappings of a userspace process with
* userpsace pages pinned into memory. We also assume devices and IOMMU
* domains are PCI based as the IOMMU API is still centered around a
* device/bus interface rather than a group interface.
*/
#include <linux/compat.h>
#include <linux/device.h>
#include <linux/fs.h>
#include <linux/iommu.h>
#include <linux/module.h>
#include <linux/mm.h>
#include <linux/rbtree.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/uaccess.h>
#include <linux/vfio.h>
#include <linux/workqueue.h>
#define DRIVER_VERSION "0.2"
#define DRIVER_AUTHOR "Alex Williamson <alex.williamson@redhat.com>"
#define DRIVER_DESC "Type1 IOMMU driver for VFIO"
static bool allow_unsafe_interrupts;
module_param_named(allow_unsafe_interrupts,
allow_unsafe_interrupts, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(allow_unsafe_interrupts,
"Enable VFIO IOMMU support for on platforms without interrupt remapping support.");
static bool disable_hugepages;
module_param_named(disable_hugepages,
disable_hugepages, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(disable_hugepages,
"Disable VFIO IOMMU support for IOMMU hugepages.");
struct vfio_iommu {
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
struct list_head domain_list;
struct mutex lock;
struct rb_root dma_list;
bool v2;
bool nesting;
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
};
struct vfio_domain {
struct iommu_domain *domain;
struct list_head next;
struct list_head group_list;
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
int prot; /* IOMMU_CACHE */
bool fgsp; /* Fine-grained super pages */
};
struct vfio_dma {
struct rb_node node;
dma_addr_t iova; /* Device address */
unsigned long vaddr; /* Process virtual addr */
vfio: hugepage support for vfio_iommu_type1 We currently send all mappings to the iommu in PAGE_SIZE chunks, which prevents the iommu from enabling support for larger page sizes. We still need to pin pages, which means we step through them in PAGE_SIZE chunks, but we can batch up contiguous physical memory chunks to allow the iommu the opportunity to use larger pages. The approach here is a bit different that the one currently used for legacy KVM device assignment. Rather than looking at the vma page size and using that as the maximum size to pass to the iommu, we instead simply look at whether the next page is physically contiguous. This means we might ask the iommu to map a 4MB region, while legacy KVM might limit itself to a maximum of 2MB. Splitting our mapping path also allows us to be smarter about locked memory because we can more easily unwind if the user attempts to exceed the limit. Therefore, rather than assuming that a mapping will result in locked memory, we test each page as it is pinned to determine whether it locks RAM vs an mmap'd MMIO region. This should result in better locking granularity and less locked page fudge factors in userspace. The unmap path uses the same algorithm as legacy KVM. We don't want to track the pfn for each mapping ourselves, but we need the pfn in order to unpin pages. We therefore ask the iommu for the iova to physical address translation, ask it to unpin a page, and see how many pages were actually unpinned. iommus supporting large pages will often return something bigger than a page here, which we know will be physically contiguous and we can unpin a batch of pfns. iommus not supporting large mappings won't see an improvement in batching here as they only unmap a page at a time. With this change, we also make a clarification to the API for mapping and unmapping DMA. We can only guarantee unmaps at the same granularity as used for the original mapping. In other words, unmapping a subregion of a previous mapping is not guaranteed and may result in a larger or smaller unmapping than requested. The size field in the unmapping structure is updated to reflect this. Previously this was unmodified on mapping, always returning the the requested unmap size. This is now updated to return the actual unmap size on success, allowing userspace to appropriately track mappings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21 09:38:02 -06:00
size_t size; /* Map size (bytes) */
int prot; /* IOMMU_READ/WRITE */
};
struct vfio_group {
struct iommu_group *iommu_group;
struct list_head next;
};
/*
* This code handles mapping and unmapping of user data buffers
* into DMA'ble space using the IOMMU
*/
static struct vfio_dma *vfio_find_dma(struct vfio_iommu *iommu,
dma_addr_t start, size_t size)
{
struct rb_node *node = iommu->dma_list.rb_node;
while (node) {
struct vfio_dma *dma = rb_entry(node, struct vfio_dma, node);
if (start + size <= dma->iova)
node = node->rb_left;
vfio: hugepage support for vfio_iommu_type1 We currently send all mappings to the iommu in PAGE_SIZE chunks, which prevents the iommu from enabling support for larger page sizes. We still need to pin pages, which means we step through them in PAGE_SIZE chunks, but we can batch up contiguous physical memory chunks to allow the iommu the opportunity to use larger pages. The approach here is a bit different that the one currently used for legacy KVM device assignment. Rather than looking at the vma page size and using that as the maximum size to pass to the iommu, we instead simply look at whether the next page is physically contiguous. This means we might ask the iommu to map a 4MB region, while legacy KVM might limit itself to a maximum of 2MB. Splitting our mapping path also allows us to be smarter about locked memory because we can more easily unwind if the user attempts to exceed the limit. Therefore, rather than assuming that a mapping will result in locked memory, we test each page as it is pinned to determine whether it locks RAM vs an mmap'd MMIO region. This should result in better locking granularity and less locked page fudge factors in userspace. The unmap path uses the same algorithm as legacy KVM. We don't want to track the pfn for each mapping ourselves, but we need the pfn in order to unpin pages. We therefore ask the iommu for the iova to physical address translation, ask it to unpin a page, and see how many pages were actually unpinned. iommus supporting large pages will often return something bigger than a page here, which we know will be physically contiguous and we can unpin a batch of pfns. iommus not supporting large mappings won't see an improvement in batching here as they only unmap a page at a time. With this change, we also make a clarification to the API for mapping and unmapping DMA. We can only guarantee unmaps at the same granularity as used for the original mapping. In other words, unmapping a subregion of a previous mapping is not guaranteed and may result in a larger or smaller unmapping than requested. The size field in the unmapping structure is updated to reflect this. Previously this was unmodified on mapping, always returning the the requested unmap size. This is now updated to return the actual unmap size on success, allowing userspace to appropriately track mappings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21 09:38:02 -06:00
else if (start >= dma->iova + dma->size)
node = node->rb_right;
else
return dma;
}
return NULL;
}
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
static void vfio_link_dma(struct vfio_iommu *iommu, struct vfio_dma *new)
{
struct rb_node **link = &iommu->dma_list.rb_node, *parent = NULL;
struct vfio_dma *dma;
while (*link) {
parent = *link;
dma = rb_entry(parent, struct vfio_dma, node);
vfio: hugepage support for vfio_iommu_type1 We currently send all mappings to the iommu in PAGE_SIZE chunks, which prevents the iommu from enabling support for larger page sizes. We still need to pin pages, which means we step through them in PAGE_SIZE chunks, but we can batch up contiguous physical memory chunks to allow the iommu the opportunity to use larger pages. The approach here is a bit different that the one currently used for legacy KVM device assignment. Rather than looking at the vma page size and using that as the maximum size to pass to the iommu, we instead simply look at whether the next page is physically contiguous. This means we might ask the iommu to map a 4MB region, while legacy KVM might limit itself to a maximum of 2MB. Splitting our mapping path also allows us to be smarter about locked memory because we can more easily unwind if the user attempts to exceed the limit. Therefore, rather than assuming that a mapping will result in locked memory, we test each page as it is pinned to determine whether it locks RAM vs an mmap'd MMIO region. This should result in better locking granularity and less locked page fudge factors in userspace. The unmap path uses the same algorithm as legacy KVM. We don't want to track the pfn for each mapping ourselves, but we need the pfn in order to unpin pages. We therefore ask the iommu for the iova to physical address translation, ask it to unpin a page, and see how many pages were actually unpinned. iommus supporting large pages will often return something bigger than a page here, which we know will be physically contiguous and we can unpin a batch of pfns. iommus not supporting large mappings won't see an improvement in batching here as they only unmap a page at a time. With this change, we also make a clarification to the API for mapping and unmapping DMA. We can only guarantee unmaps at the same granularity as used for the original mapping. In other words, unmapping a subregion of a previous mapping is not guaranteed and may result in a larger or smaller unmapping than requested. The size field in the unmapping structure is updated to reflect this. Previously this was unmodified on mapping, always returning the the requested unmap size. This is now updated to return the actual unmap size on success, allowing userspace to appropriately track mappings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21 09:38:02 -06:00
if (new->iova + new->size <= dma->iova)
link = &(*link)->rb_left;
else
link = &(*link)->rb_right;
}
rb_link_node(&new->node, parent, link);
rb_insert_color(&new->node, &iommu->dma_list);
}
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
static void vfio_unlink_dma(struct vfio_iommu *iommu, struct vfio_dma *old)
{
rb_erase(&old->node, &iommu->dma_list);
}
struct vwork {
struct mm_struct *mm;
long npage;
struct work_struct work;
};
/* delayed decrement/increment for locked_vm */
static void vfio_lock_acct_bg(struct work_struct *work)
{
struct vwork *vwork = container_of(work, struct vwork, work);
struct mm_struct *mm;
mm = vwork->mm;
down_write(&mm->mmap_sem);
mm->locked_vm += vwork->npage;
up_write(&mm->mmap_sem);
mmput(mm);
kfree(vwork);
}
static void vfio_lock_acct(long npage)
{
struct vwork *vwork;
struct mm_struct *mm;
vfio: hugepage support for vfio_iommu_type1 We currently send all mappings to the iommu in PAGE_SIZE chunks, which prevents the iommu from enabling support for larger page sizes. We still need to pin pages, which means we step through them in PAGE_SIZE chunks, but we can batch up contiguous physical memory chunks to allow the iommu the opportunity to use larger pages. The approach here is a bit different that the one currently used for legacy KVM device assignment. Rather than looking at the vma page size and using that as the maximum size to pass to the iommu, we instead simply look at whether the next page is physically contiguous. This means we might ask the iommu to map a 4MB region, while legacy KVM might limit itself to a maximum of 2MB. Splitting our mapping path also allows us to be smarter about locked memory because we can more easily unwind if the user attempts to exceed the limit. Therefore, rather than assuming that a mapping will result in locked memory, we test each page as it is pinned to determine whether it locks RAM vs an mmap'd MMIO region. This should result in better locking granularity and less locked page fudge factors in userspace. The unmap path uses the same algorithm as legacy KVM. We don't want to track the pfn for each mapping ourselves, but we need the pfn in order to unpin pages. We therefore ask the iommu for the iova to physical address translation, ask it to unpin a page, and see how many pages were actually unpinned. iommus supporting large pages will often return something bigger than a page here, which we know will be physically contiguous and we can unpin a batch of pfns. iommus not supporting large mappings won't see an improvement in batching here as they only unmap a page at a time. With this change, we also make a clarification to the API for mapping and unmapping DMA. We can only guarantee unmaps at the same granularity as used for the original mapping. In other words, unmapping a subregion of a previous mapping is not guaranteed and may result in a larger or smaller unmapping than requested. The size field in the unmapping structure is updated to reflect this. Previously this was unmodified on mapping, always returning the the requested unmap size. This is now updated to return the actual unmap size on success, allowing userspace to appropriately track mappings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21 09:38:02 -06:00
if (!current->mm || !npage)
return; /* process exited or nothing to do */
if (down_write_trylock(&current->mm->mmap_sem)) {
current->mm->locked_vm += npage;
up_write(&current->mm->mmap_sem);
return;
}
/*
* Couldn't get mmap_sem lock, so must setup to update
* mm->locked_vm later. If locked_vm were atomic, we
* wouldn't need this silliness
*/
vwork = kmalloc(sizeof(struct vwork), GFP_KERNEL);
if (!vwork)
return;
mm = get_task_mm(current);
if (!mm) {
kfree(vwork);
return;
}
INIT_WORK(&vwork->work, vfio_lock_acct_bg);
vwork->mm = mm;
vwork->npage = npage;
schedule_work(&vwork->work);
}
/*
* Some mappings aren't backed by a struct page, for example an mmap'd
* MMIO range for our own or another device. These use a different
* pfn conversion and shouldn't be tracked as locked pages.
*/
static bool is_invalid_reserved_pfn(unsigned long pfn)
{
if (pfn_valid(pfn)) {
bool reserved;
struct page *tail = pfn_to_page(pfn);
mm: close PageTail race Commit bf6bddf1924e ("mm: introduce compaction and migration for ballooned pages") introduces page_count(page) into memory compaction which dereferences page->first_page if PageTail(page). This results in a very rare NULL pointer dereference on the aforementioned page_count(page). Indeed, anything that does compound_head(), including page_count() is susceptible to racing with prep_compound_page() and seeing a NULL or dangling page->first_page pointer. This patch uses Andrea's implementation of compound_trans_head() that deals with such a race and makes it the default compound_head() implementation. This includes a read memory barrier that ensures that if PageTail(head) is true that we return a head page that is neither NULL nor dangling. The patch then adds a store memory barrier to prep_compound_page() to ensure page->first_page is set. This is the safest way to ensure we see the head page that we are expecting, PageTail(page) is already in the unlikely() path and the memory barriers are unfortunately required. Hugetlbfs is the exception, we don't enforce a store memory barrier during init since no race is possible. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Holger Kiehl <Holger.Kiehl@dwd.de> Cc: Christoph Lameter <cl@linux.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Mel Gorman <mgorman@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-03-03 16:38:18 -07:00
struct page *head = compound_head(tail);
reserved = !!(PageReserved(head));
if (head != tail) {
/*
* "head" is not a dangling pointer
mm: close PageTail race Commit bf6bddf1924e ("mm: introduce compaction and migration for ballooned pages") introduces page_count(page) into memory compaction which dereferences page->first_page if PageTail(page). This results in a very rare NULL pointer dereference on the aforementioned page_count(page). Indeed, anything that does compound_head(), including page_count() is susceptible to racing with prep_compound_page() and seeing a NULL or dangling page->first_page pointer. This patch uses Andrea's implementation of compound_trans_head() that deals with such a race and makes it the default compound_head() implementation. This includes a read memory barrier that ensures that if PageTail(head) is true that we return a head page that is neither NULL nor dangling. The patch then adds a store memory barrier to prep_compound_page() to ensure page->first_page is set. This is the safest way to ensure we see the head page that we are expecting, PageTail(page) is already in the unlikely() path and the memory barriers are unfortunately required. Hugetlbfs is the exception, we don't enforce a store memory barrier during init since no race is possible. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Holger Kiehl <Holger.Kiehl@dwd.de> Cc: Christoph Lameter <cl@linux.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Mel Gorman <mgorman@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-03-03 16:38:18 -07:00
* (compound_head takes care of that)
* but the hugepage may have been split
* from under us (and we may not hold a
* reference count on the head page so it can
* be reused before we run PageReferenced), so
* we've to check PageTail before returning
* what we just read.
*/
smp_rmb();
if (PageTail(tail))
return reserved;
}
return PageReserved(tail);
}
return true;
}
static int put_pfn(unsigned long pfn, int prot)
{
if (!is_invalid_reserved_pfn(pfn)) {
struct page *page = pfn_to_page(pfn);
if (prot & IOMMU_WRITE)
SetPageDirty(page);
put_page(page);
return 1;
}
return 0;
}
static int vaddr_get_pfn(unsigned long vaddr, int prot, unsigned long *pfn)
{
struct page *page[1];
struct vm_area_struct *vma;
int ret = -EFAULT;
if (get_user_pages_fast(vaddr, 1, !!(prot & IOMMU_WRITE), page) == 1) {
*pfn = page_to_pfn(page[0]);
return 0;
}
down_read(&current->mm->mmap_sem);
vma = find_vma_intersection(current->mm, vaddr, vaddr + 1);
if (vma && vma->vm_flags & VM_PFNMAP) {
*pfn = ((vaddr - vma->vm_start) >> PAGE_SHIFT) + vma->vm_pgoff;
if (is_invalid_reserved_pfn(*pfn))
ret = 0;
}
up_read(&current->mm->mmap_sem);
return ret;
}
vfio: hugepage support for vfio_iommu_type1 We currently send all mappings to the iommu in PAGE_SIZE chunks, which prevents the iommu from enabling support for larger page sizes. We still need to pin pages, which means we step through them in PAGE_SIZE chunks, but we can batch up contiguous physical memory chunks to allow the iommu the opportunity to use larger pages. The approach here is a bit different that the one currently used for legacy KVM device assignment. Rather than looking at the vma page size and using that as the maximum size to pass to the iommu, we instead simply look at whether the next page is physically contiguous. This means we might ask the iommu to map a 4MB region, while legacy KVM might limit itself to a maximum of 2MB. Splitting our mapping path also allows us to be smarter about locked memory because we can more easily unwind if the user attempts to exceed the limit. Therefore, rather than assuming that a mapping will result in locked memory, we test each page as it is pinned to determine whether it locks RAM vs an mmap'd MMIO region. This should result in better locking granularity and less locked page fudge factors in userspace. The unmap path uses the same algorithm as legacy KVM. We don't want to track the pfn for each mapping ourselves, but we need the pfn in order to unpin pages. We therefore ask the iommu for the iova to physical address translation, ask it to unpin a page, and see how many pages were actually unpinned. iommus supporting large pages will often return something bigger than a page here, which we know will be physically contiguous and we can unpin a batch of pfns. iommus not supporting large mappings won't see an improvement in batching here as they only unmap a page at a time. With this change, we also make a clarification to the API for mapping and unmapping DMA. We can only guarantee unmaps at the same granularity as used for the original mapping. In other words, unmapping a subregion of a previous mapping is not guaranteed and may result in a larger or smaller unmapping than requested. The size field in the unmapping structure is updated to reflect this. Previously this was unmodified on mapping, always returning the the requested unmap size. This is now updated to return the actual unmap size on success, allowing userspace to appropriately track mappings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21 09:38:02 -06:00
/*
* Attempt to pin pages. We really don't want to track all the pfns and
* the iommu can only map chunks of consecutive pfns anyway, so get the
* first page and all consecutive pages with the same locking.
*/
static long vfio_pin_pages(unsigned long vaddr, long npage,
int prot, unsigned long *pfn_base)
{
vfio: hugepage support for vfio_iommu_type1 We currently send all mappings to the iommu in PAGE_SIZE chunks, which prevents the iommu from enabling support for larger page sizes. We still need to pin pages, which means we step through them in PAGE_SIZE chunks, but we can batch up contiguous physical memory chunks to allow the iommu the opportunity to use larger pages. The approach here is a bit different that the one currently used for legacy KVM device assignment. Rather than looking at the vma page size and using that as the maximum size to pass to the iommu, we instead simply look at whether the next page is physically contiguous. This means we might ask the iommu to map a 4MB region, while legacy KVM might limit itself to a maximum of 2MB. Splitting our mapping path also allows us to be smarter about locked memory because we can more easily unwind if the user attempts to exceed the limit. Therefore, rather than assuming that a mapping will result in locked memory, we test each page as it is pinned to determine whether it locks RAM vs an mmap'd MMIO region. This should result in better locking granularity and less locked page fudge factors in userspace. The unmap path uses the same algorithm as legacy KVM. We don't want to track the pfn for each mapping ourselves, but we need the pfn in order to unpin pages. We therefore ask the iommu for the iova to physical address translation, ask it to unpin a page, and see how many pages were actually unpinned. iommus supporting large pages will often return something bigger than a page here, which we know will be physically contiguous and we can unpin a batch of pfns. iommus not supporting large mappings won't see an improvement in batching here as they only unmap a page at a time. With this change, we also make a clarification to the API for mapping and unmapping DMA. We can only guarantee unmaps at the same granularity as used for the original mapping. In other words, unmapping a subregion of a previous mapping is not guaranteed and may result in a larger or smaller unmapping than requested. The size field in the unmapping structure is updated to reflect this. Previously this was unmodified on mapping, always returning the the requested unmap size. This is now updated to return the actual unmap size on success, allowing userspace to appropriately track mappings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21 09:38:02 -06:00
unsigned long limit = rlimit(RLIMIT_MEMLOCK) >> PAGE_SHIFT;
bool lock_cap = capable(CAP_IPC_LOCK);
long ret, i;
bool rsvd;
vfio: hugepage support for vfio_iommu_type1 We currently send all mappings to the iommu in PAGE_SIZE chunks, which prevents the iommu from enabling support for larger page sizes. We still need to pin pages, which means we step through them in PAGE_SIZE chunks, but we can batch up contiguous physical memory chunks to allow the iommu the opportunity to use larger pages. The approach here is a bit different that the one currently used for legacy KVM device assignment. Rather than looking at the vma page size and using that as the maximum size to pass to the iommu, we instead simply look at whether the next page is physically contiguous. This means we might ask the iommu to map a 4MB region, while legacy KVM might limit itself to a maximum of 2MB. Splitting our mapping path also allows us to be smarter about locked memory because we can more easily unwind if the user attempts to exceed the limit. Therefore, rather than assuming that a mapping will result in locked memory, we test each page as it is pinned to determine whether it locks RAM vs an mmap'd MMIO region. This should result in better locking granularity and less locked page fudge factors in userspace. The unmap path uses the same algorithm as legacy KVM. We don't want to track the pfn for each mapping ourselves, but we need the pfn in order to unpin pages. We therefore ask the iommu for the iova to physical address translation, ask it to unpin a page, and see how many pages were actually unpinned. iommus supporting large pages will often return something bigger than a page here, which we know will be physically contiguous and we can unpin a batch of pfns. iommus not supporting large mappings won't see an improvement in batching here as they only unmap a page at a time. With this change, we also make a clarification to the API for mapping and unmapping DMA. We can only guarantee unmaps at the same granularity as used for the original mapping. In other words, unmapping a subregion of a previous mapping is not guaranteed and may result in a larger or smaller unmapping than requested. The size field in the unmapping structure is updated to reflect this. Previously this was unmodified on mapping, always returning the the requested unmap size. This is now updated to return the actual unmap size on success, allowing userspace to appropriately track mappings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21 09:38:02 -06:00
if (!current->mm)
return -ENODEV;
vfio: hugepage support for vfio_iommu_type1 We currently send all mappings to the iommu in PAGE_SIZE chunks, which prevents the iommu from enabling support for larger page sizes. We still need to pin pages, which means we step through them in PAGE_SIZE chunks, but we can batch up contiguous physical memory chunks to allow the iommu the opportunity to use larger pages. The approach here is a bit different that the one currently used for legacy KVM device assignment. Rather than looking at the vma page size and using that as the maximum size to pass to the iommu, we instead simply look at whether the next page is physically contiguous. This means we might ask the iommu to map a 4MB region, while legacy KVM might limit itself to a maximum of 2MB. Splitting our mapping path also allows us to be smarter about locked memory because we can more easily unwind if the user attempts to exceed the limit. Therefore, rather than assuming that a mapping will result in locked memory, we test each page as it is pinned to determine whether it locks RAM vs an mmap'd MMIO region. This should result in better locking granularity and less locked page fudge factors in userspace. The unmap path uses the same algorithm as legacy KVM. We don't want to track the pfn for each mapping ourselves, but we need the pfn in order to unpin pages. We therefore ask the iommu for the iova to physical address translation, ask it to unpin a page, and see how many pages were actually unpinned. iommus supporting large pages will often return something bigger than a page here, which we know will be physically contiguous and we can unpin a batch of pfns. iommus not supporting large mappings won't see an improvement in batching here as they only unmap a page at a time. With this change, we also make a clarification to the API for mapping and unmapping DMA. We can only guarantee unmaps at the same granularity as used for the original mapping. In other words, unmapping a subregion of a previous mapping is not guaranteed and may result in a larger or smaller unmapping than requested. The size field in the unmapping structure is updated to reflect this. Previously this was unmodified on mapping, always returning the the requested unmap size. This is now updated to return the actual unmap size on success, allowing userspace to appropriately track mappings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21 09:38:02 -06:00
ret = vaddr_get_pfn(vaddr, prot, pfn_base);
if (ret)
return ret;
rsvd = is_invalid_reserved_pfn(*pfn_base);
if (!rsvd && !lock_cap && current->mm->locked_vm + 1 > limit) {
vfio: hugepage support for vfio_iommu_type1 We currently send all mappings to the iommu in PAGE_SIZE chunks, which prevents the iommu from enabling support for larger page sizes. We still need to pin pages, which means we step through them in PAGE_SIZE chunks, but we can batch up contiguous physical memory chunks to allow the iommu the opportunity to use larger pages. The approach here is a bit different that the one currently used for legacy KVM device assignment. Rather than looking at the vma page size and using that as the maximum size to pass to the iommu, we instead simply look at whether the next page is physically contiguous. This means we might ask the iommu to map a 4MB region, while legacy KVM might limit itself to a maximum of 2MB. Splitting our mapping path also allows us to be smarter about locked memory because we can more easily unwind if the user attempts to exceed the limit. Therefore, rather than assuming that a mapping will result in locked memory, we test each page as it is pinned to determine whether it locks RAM vs an mmap'd MMIO region. This should result in better locking granularity and less locked page fudge factors in userspace. The unmap path uses the same algorithm as legacy KVM. We don't want to track the pfn for each mapping ourselves, but we need the pfn in order to unpin pages. We therefore ask the iommu for the iova to physical address translation, ask it to unpin a page, and see how many pages were actually unpinned. iommus supporting large pages will often return something bigger than a page here, which we know will be physically contiguous and we can unpin a batch of pfns. iommus not supporting large mappings won't see an improvement in batching here as they only unmap a page at a time. With this change, we also make a clarification to the API for mapping and unmapping DMA. We can only guarantee unmaps at the same granularity as used for the original mapping. In other words, unmapping a subregion of a previous mapping is not guaranteed and may result in a larger or smaller unmapping than requested. The size field in the unmapping structure is updated to reflect this. Previously this was unmodified on mapping, always returning the the requested unmap size. This is now updated to return the actual unmap size on success, allowing userspace to appropriately track mappings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21 09:38:02 -06:00
put_pfn(*pfn_base, prot);
pr_warn("%s: RLIMIT_MEMLOCK (%ld) exceeded\n", __func__,
limit << PAGE_SHIFT);
return -ENOMEM;
}
if (unlikely(disable_hugepages)) {
if (!rsvd)
vfio_lock_acct(1);
return 1;
}
vfio: hugepage support for vfio_iommu_type1 We currently send all mappings to the iommu in PAGE_SIZE chunks, which prevents the iommu from enabling support for larger page sizes. We still need to pin pages, which means we step through them in PAGE_SIZE chunks, but we can batch up contiguous physical memory chunks to allow the iommu the opportunity to use larger pages. The approach here is a bit different that the one currently used for legacy KVM device assignment. Rather than looking at the vma page size and using that as the maximum size to pass to the iommu, we instead simply look at whether the next page is physically contiguous. This means we might ask the iommu to map a 4MB region, while legacy KVM might limit itself to a maximum of 2MB. Splitting our mapping path also allows us to be smarter about locked memory because we can more easily unwind if the user attempts to exceed the limit. Therefore, rather than assuming that a mapping will result in locked memory, we test each page as it is pinned to determine whether it locks RAM vs an mmap'd MMIO region. This should result in better locking granularity and less locked page fudge factors in userspace. The unmap path uses the same algorithm as legacy KVM. We don't want to track the pfn for each mapping ourselves, but we need the pfn in order to unpin pages. We therefore ask the iommu for the iova to physical address translation, ask it to unpin a page, and see how many pages were actually unpinned. iommus supporting large pages will often return something bigger than a page here, which we know will be physically contiguous and we can unpin a batch of pfns. iommus not supporting large mappings won't see an improvement in batching here as they only unmap a page at a time. With this change, we also make a clarification to the API for mapping and unmapping DMA. We can only guarantee unmaps at the same granularity as used for the original mapping. In other words, unmapping a subregion of a previous mapping is not guaranteed and may result in a larger or smaller unmapping than requested. The size field in the unmapping structure is updated to reflect this. Previously this was unmodified on mapping, always returning the the requested unmap size. This is now updated to return the actual unmap size on success, allowing userspace to appropriately track mappings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21 09:38:02 -06:00
/* Lock all the consecutive pages from pfn_base */
for (i = 1, vaddr += PAGE_SIZE; i < npage; i++, vaddr += PAGE_SIZE) {
unsigned long pfn = 0;
ret = vaddr_get_pfn(vaddr, prot, &pfn);
vfio: hugepage support for vfio_iommu_type1 We currently send all mappings to the iommu in PAGE_SIZE chunks, which prevents the iommu from enabling support for larger page sizes. We still need to pin pages, which means we step through them in PAGE_SIZE chunks, but we can batch up contiguous physical memory chunks to allow the iommu the opportunity to use larger pages. The approach here is a bit different that the one currently used for legacy KVM device assignment. Rather than looking at the vma page size and using that as the maximum size to pass to the iommu, we instead simply look at whether the next page is physically contiguous. This means we might ask the iommu to map a 4MB region, while legacy KVM might limit itself to a maximum of 2MB. Splitting our mapping path also allows us to be smarter about locked memory because we can more easily unwind if the user attempts to exceed the limit. Therefore, rather than assuming that a mapping will result in locked memory, we test each page as it is pinned to determine whether it locks RAM vs an mmap'd MMIO region. This should result in better locking granularity and less locked page fudge factors in userspace. The unmap path uses the same algorithm as legacy KVM. We don't want to track the pfn for each mapping ourselves, but we need the pfn in order to unpin pages. We therefore ask the iommu for the iova to physical address translation, ask it to unpin a page, and see how many pages were actually unpinned. iommus supporting large pages will often return something bigger than a page here, which we know will be physically contiguous and we can unpin a batch of pfns. iommus not supporting large mappings won't see an improvement in batching here as they only unmap a page at a time. With this change, we also make a clarification to the API for mapping and unmapping DMA. We can only guarantee unmaps at the same granularity as used for the original mapping. In other words, unmapping a subregion of a previous mapping is not guaranteed and may result in a larger or smaller unmapping than requested. The size field in the unmapping structure is updated to reflect this. Previously this was unmodified on mapping, always returning the the requested unmap size. This is now updated to return the actual unmap size on success, allowing userspace to appropriately track mappings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21 09:38:02 -06:00
if (ret)
break;
if (pfn != *pfn_base + i ||
rsvd != is_invalid_reserved_pfn(pfn)) {
vfio: hugepage support for vfio_iommu_type1 We currently send all mappings to the iommu in PAGE_SIZE chunks, which prevents the iommu from enabling support for larger page sizes. We still need to pin pages, which means we step through them in PAGE_SIZE chunks, but we can batch up contiguous physical memory chunks to allow the iommu the opportunity to use larger pages. The approach here is a bit different that the one currently used for legacy KVM device assignment. Rather than looking at the vma page size and using that as the maximum size to pass to the iommu, we instead simply look at whether the next page is physically contiguous. This means we might ask the iommu to map a 4MB region, while legacy KVM might limit itself to a maximum of 2MB. Splitting our mapping path also allows us to be smarter about locked memory because we can more easily unwind if the user attempts to exceed the limit. Therefore, rather than assuming that a mapping will result in locked memory, we test each page as it is pinned to determine whether it locks RAM vs an mmap'd MMIO region. This should result in better locking granularity and less locked page fudge factors in userspace. The unmap path uses the same algorithm as legacy KVM. We don't want to track the pfn for each mapping ourselves, but we need the pfn in order to unpin pages. We therefore ask the iommu for the iova to physical address translation, ask it to unpin a page, and see how many pages were actually unpinned. iommus supporting large pages will often return something bigger than a page here, which we know will be physically contiguous and we can unpin a batch of pfns. iommus not supporting large mappings won't see an improvement in batching here as they only unmap a page at a time. With this change, we also make a clarification to the API for mapping and unmapping DMA. We can only guarantee unmaps at the same granularity as used for the original mapping. In other words, unmapping a subregion of a previous mapping is not guaranteed and may result in a larger or smaller unmapping than requested. The size field in the unmapping structure is updated to reflect this. Previously this was unmodified on mapping, always returning the the requested unmap size. This is now updated to return the actual unmap size on success, allowing userspace to appropriately track mappings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21 09:38:02 -06:00
put_pfn(pfn, prot);
break;
}
if (!rsvd && !lock_cap &&
current->mm->locked_vm + i + 1 > limit) {
vfio: hugepage support for vfio_iommu_type1 We currently send all mappings to the iommu in PAGE_SIZE chunks, which prevents the iommu from enabling support for larger page sizes. We still need to pin pages, which means we step through them in PAGE_SIZE chunks, but we can batch up contiguous physical memory chunks to allow the iommu the opportunity to use larger pages. The approach here is a bit different that the one currently used for legacy KVM device assignment. Rather than looking at the vma page size and using that as the maximum size to pass to the iommu, we instead simply look at whether the next page is physically contiguous. This means we might ask the iommu to map a 4MB region, while legacy KVM might limit itself to a maximum of 2MB. Splitting our mapping path also allows us to be smarter about locked memory because we can more easily unwind if the user attempts to exceed the limit. Therefore, rather than assuming that a mapping will result in locked memory, we test each page as it is pinned to determine whether it locks RAM vs an mmap'd MMIO region. This should result in better locking granularity and less locked page fudge factors in userspace. The unmap path uses the same algorithm as legacy KVM. We don't want to track the pfn for each mapping ourselves, but we need the pfn in order to unpin pages. We therefore ask the iommu for the iova to physical address translation, ask it to unpin a page, and see how many pages were actually unpinned. iommus supporting large pages will often return something bigger than a page here, which we know will be physically contiguous and we can unpin a batch of pfns. iommus not supporting large mappings won't see an improvement in batching here as they only unmap a page at a time. With this change, we also make a clarification to the API for mapping and unmapping DMA. We can only guarantee unmaps at the same granularity as used for the original mapping. In other words, unmapping a subregion of a previous mapping is not guaranteed and may result in a larger or smaller unmapping than requested. The size field in the unmapping structure is updated to reflect this. Previously this was unmodified on mapping, always returning the the requested unmap size. This is now updated to return the actual unmap size on success, allowing userspace to appropriately track mappings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21 09:38:02 -06:00
put_pfn(pfn, prot);
pr_warn("%s: RLIMIT_MEMLOCK (%ld) exceeded\n",
__func__, limit << PAGE_SHIFT);
break;
}
}
if (!rsvd)
vfio_lock_acct(i);
vfio: hugepage support for vfio_iommu_type1 We currently send all mappings to the iommu in PAGE_SIZE chunks, which prevents the iommu from enabling support for larger page sizes. We still need to pin pages, which means we step through them in PAGE_SIZE chunks, but we can batch up contiguous physical memory chunks to allow the iommu the opportunity to use larger pages. The approach here is a bit different that the one currently used for legacy KVM device assignment. Rather than looking at the vma page size and using that as the maximum size to pass to the iommu, we instead simply look at whether the next page is physically contiguous. This means we might ask the iommu to map a 4MB region, while legacy KVM might limit itself to a maximum of 2MB. Splitting our mapping path also allows us to be smarter about locked memory because we can more easily unwind if the user attempts to exceed the limit. Therefore, rather than assuming that a mapping will result in locked memory, we test each page as it is pinned to determine whether it locks RAM vs an mmap'd MMIO region. This should result in better locking granularity and less locked page fudge factors in userspace. The unmap path uses the same algorithm as legacy KVM. We don't want to track the pfn for each mapping ourselves, but we need the pfn in order to unpin pages. We therefore ask the iommu for the iova to physical address translation, ask it to unpin a page, and see how many pages were actually unpinned. iommus supporting large pages will often return something bigger than a page here, which we know will be physically contiguous and we can unpin a batch of pfns. iommus not supporting large mappings won't see an improvement in batching here as they only unmap a page at a time. With this change, we also make a clarification to the API for mapping and unmapping DMA. We can only guarantee unmaps at the same granularity as used for the original mapping. In other words, unmapping a subregion of a previous mapping is not guaranteed and may result in a larger or smaller unmapping than requested. The size field in the unmapping structure is updated to reflect this. Previously this was unmodified on mapping, always returning the the requested unmap size. This is now updated to return the actual unmap size on success, allowing userspace to appropriately track mappings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21 09:38:02 -06:00
return i;
}
static long vfio_unpin_pages(unsigned long pfn, long npage,
int prot, bool do_accounting)
{
unsigned long unlocked = 0;
long i;
for (i = 0; i < npage; i++)
unlocked += put_pfn(pfn++, prot);
if (do_accounting)
vfio_lock_acct(-unlocked);
return unlocked;
}
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
static void vfio_unmap_unpin(struct vfio_iommu *iommu, struct vfio_dma *dma)
vfio: hugepage support for vfio_iommu_type1 We currently send all mappings to the iommu in PAGE_SIZE chunks, which prevents the iommu from enabling support for larger page sizes. We still need to pin pages, which means we step through them in PAGE_SIZE chunks, but we can batch up contiguous physical memory chunks to allow the iommu the opportunity to use larger pages. The approach here is a bit different that the one currently used for legacy KVM device assignment. Rather than looking at the vma page size and using that as the maximum size to pass to the iommu, we instead simply look at whether the next page is physically contiguous. This means we might ask the iommu to map a 4MB region, while legacy KVM might limit itself to a maximum of 2MB. Splitting our mapping path also allows us to be smarter about locked memory because we can more easily unwind if the user attempts to exceed the limit. Therefore, rather than assuming that a mapping will result in locked memory, we test each page as it is pinned to determine whether it locks RAM vs an mmap'd MMIO region. This should result in better locking granularity and less locked page fudge factors in userspace. The unmap path uses the same algorithm as legacy KVM. We don't want to track the pfn for each mapping ourselves, but we need the pfn in order to unpin pages. We therefore ask the iommu for the iova to physical address translation, ask it to unpin a page, and see how many pages were actually unpinned. iommus supporting large pages will often return something bigger than a page here, which we know will be physically contiguous and we can unpin a batch of pfns. iommus not supporting large mappings won't see an improvement in batching here as they only unmap a page at a time. With this change, we also make a clarification to the API for mapping and unmapping DMA. We can only guarantee unmaps at the same granularity as used for the original mapping. In other words, unmapping a subregion of a previous mapping is not guaranteed and may result in a larger or smaller unmapping than requested. The size field in the unmapping structure is updated to reflect this. Previously this was unmodified on mapping, always returning the the requested unmap size. This is now updated to return the actual unmap size on success, allowing userspace to appropriately track mappings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21 09:38:02 -06:00
{
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
dma_addr_t iova = dma->iova, end = dma->iova + dma->size;
struct vfio_domain *domain, *d;
vfio: hugepage support for vfio_iommu_type1 We currently send all mappings to the iommu in PAGE_SIZE chunks, which prevents the iommu from enabling support for larger page sizes. We still need to pin pages, which means we step through them in PAGE_SIZE chunks, but we can batch up contiguous physical memory chunks to allow the iommu the opportunity to use larger pages. The approach here is a bit different that the one currently used for legacy KVM device assignment. Rather than looking at the vma page size and using that as the maximum size to pass to the iommu, we instead simply look at whether the next page is physically contiguous. This means we might ask the iommu to map a 4MB region, while legacy KVM might limit itself to a maximum of 2MB. Splitting our mapping path also allows us to be smarter about locked memory because we can more easily unwind if the user attempts to exceed the limit. Therefore, rather than assuming that a mapping will result in locked memory, we test each page as it is pinned to determine whether it locks RAM vs an mmap'd MMIO region. This should result in better locking granularity and less locked page fudge factors in userspace. The unmap path uses the same algorithm as legacy KVM. We don't want to track the pfn for each mapping ourselves, but we need the pfn in order to unpin pages. We therefore ask the iommu for the iova to physical address translation, ask it to unpin a page, and see how many pages were actually unpinned. iommus supporting large pages will often return something bigger than a page here, which we know will be physically contiguous and we can unpin a batch of pfns. iommus not supporting large mappings won't see an improvement in batching here as they only unmap a page at a time. With this change, we also make a clarification to the API for mapping and unmapping DMA. We can only guarantee unmaps at the same granularity as used for the original mapping. In other words, unmapping a subregion of a previous mapping is not guaranteed and may result in a larger or smaller unmapping than requested. The size field in the unmapping structure is updated to reflect this. Previously this was unmodified on mapping, always returning the the requested unmap size. This is now updated to return the actual unmap size on success, allowing userspace to appropriately track mappings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21 09:38:02 -06:00
long unlocked = 0;
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
if (!dma->size)
return;
/*
* We use the IOMMU to track the physical addresses, otherwise we'd
* need a much more complicated tracking system. Unfortunately that
* means we need to use one of the iommu domains to figure out the
* pfns to unpin. The rest need to be unmapped in advance so we have
* no iommu translations remaining when the pages are unpinned.
*/
domain = d = list_first_entry(&iommu->domain_list,
struct vfio_domain, next);
list_for_each_entry_continue(d, &iommu->domain_list, next) {
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
iommu_unmap(d->domain, dma->iova, dma->size);
cond_resched();
}
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
vfio: hugepage support for vfio_iommu_type1 We currently send all mappings to the iommu in PAGE_SIZE chunks, which prevents the iommu from enabling support for larger page sizes. We still need to pin pages, which means we step through them in PAGE_SIZE chunks, but we can batch up contiguous physical memory chunks to allow the iommu the opportunity to use larger pages. The approach here is a bit different that the one currently used for legacy KVM device assignment. Rather than looking at the vma page size and using that as the maximum size to pass to the iommu, we instead simply look at whether the next page is physically contiguous. This means we might ask the iommu to map a 4MB region, while legacy KVM might limit itself to a maximum of 2MB. Splitting our mapping path also allows us to be smarter about locked memory because we can more easily unwind if the user attempts to exceed the limit. Therefore, rather than assuming that a mapping will result in locked memory, we test each page as it is pinned to determine whether it locks RAM vs an mmap'd MMIO region. This should result in better locking granularity and less locked page fudge factors in userspace. The unmap path uses the same algorithm as legacy KVM. We don't want to track the pfn for each mapping ourselves, but we need the pfn in order to unpin pages. We therefore ask the iommu for the iova to physical address translation, ask it to unpin a page, and see how many pages were actually unpinned. iommus supporting large pages will often return something bigger than a page here, which we know will be physically contiguous and we can unpin a batch of pfns. iommus not supporting large mappings won't see an improvement in batching here as they only unmap a page at a time. With this change, we also make a clarification to the API for mapping and unmapping DMA. We can only guarantee unmaps at the same granularity as used for the original mapping. In other words, unmapping a subregion of a previous mapping is not guaranteed and may result in a larger or smaller unmapping than requested. The size field in the unmapping structure is updated to reflect this. Previously this was unmodified on mapping, always returning the the requested unmap size. This is now updated to return the actual unmap size on success, allowing userspace to appropriately track mappings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21 09:38:02 -06:00
while (iova < end) {
size_t unmapped, len;
phys_addr_t phys, next;
vfio: hugepage support for vfio_iommu_type1 We currently send all mappings to the iommu in PAGE_SIZE chunks, which prevents the iommu from enabling support for larger page sizes. We still need to pin pages, which means we step through them in PAGE_SIZE chunks, but we can batch up contiguous physical memory chunks to allow the iommu the opportunity to use larger pages. The approach here is a bit different that the one currently used for legacy KVM device assignment. Rather than looking at the vma page size and using that as the maximum size to pass to the iommu, we instead simply look at whether the next page is physically contiguous. This means we might ask the iommu to map a 4MB region, while legacy KVM might limit itself to a maximum of 2MB. Splitting our mapping path also allows us to be smarter about locked memory because we can more easily unwind if the user attempts to exceed the limit. Therefore, rather than assuming that a mapping will result in locked memory, we test each page as it is pinned to determine whether it locks RAM vs an mmap'd MMIO region. This should result in better locking granularity and less locked page fudge factors in userspace. The unmap path uses the same algorithm as legacy KVM. We don't want to track the pfn for each mapping ourselves, but we need the pfn in order to unpin pages. We therefore ask the iommu for the iova to physical address translation, ask it to unpin a page, and see how many pages were actually unpinned. iommus supporting large pages will often return something bigger than a page here, which we know will be physically contiguous and we can unpin a batch of pfns. iommus not supporting large mappings won't see an improvement in batching here as they only unmap a page at a time. With this change, we also make a clarification to the API for mapping and unmapping DMA. We can only guarantee unmaps at the same granularity as used for the original mapping. In other words, unmapping a subregion of a previous mapping is not guaranteed and may result in a larger or smaller unmapping than requested. The size field in the unmapping structure is updated to reflect this. Previously this was unmodified on mapping, always returning the the requested unmap size. This is now updated to return the actual unmap size on success, allowing userspace to appropriately track mappings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21 09:38:02 -06:00
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
phys = iommu_iova_to_phys(domain->domain, iova);
vfio: hugepage support for vfio_iommu_type1 We currently send all mappings to the iommu in PAGE_SIZE chunks, which prevents the iommu from enabling support for larger page sizes. We still need to pin pages, which means we step through them in PAGE_SIZE chunks, but we can batch up contiguous physical memory chunks to allow the iommu the opportunity to use larger pages. The approach here is a bit different that the one currently used for legacy KVM device assignment. Rather than looking at the vma page size and using that as the maximum size to pass to the iommu, we instead simply look at whether the next page is physically contiguous. This means we might ask the iommu to map a 4MB region, while legacy KVM might limit itself to a maximum of 2MB. Splitting our mapping path also allows us to be smarter about locked memory because we can more easily unwind if the user attempts to exceed the limit. Therefore, rather than assuming that a mapping will result in locked memory, we test each page as it is pinned to determine whether it locks RAM vs an mmap'd MMIO region. This should result in better locking granularity and less locked page fudge factors in userspace. The unmap path uses the same algorithm as legacy KVM. We don't want to track the pfn for each mapping ourselves, but we need the pfn in order to unpin pages. We therefore ask the iommu for the iova to physical address translation, ask it to unpin a page, and see how many pages were actually unpinned. iommus supporting large pages will often return something bigger than a page here, which we know will be physically contiguous and we can unpin a batch of pfns. iommus not supporting large mappings won't see an improvement in batching here as they only unmap a page at a time. With this change, we also make a clarification to the API for mapping and unmapping DMA. We can only guarantee unmaps at the same granularity as used for the original mapping. In other words, unmapping a subregion of a previous mapping is not guaranteed and may result in a larger or smaller unmapping than requested. The size field in the unmapping structure is updated to reflect this. Previously this was unmodified on mapping, always returning the the requested unmap size. This is now updated to return the actual unmap size on success, allowing userspace to appropriately track mappings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21 09:38:02 -06:00
if (WARN_ON(!phys)) {
iova += PAGE_SIZE;
continue;
}
vfio: hugepage support for vfio_iommu_type1 We currently send all mappings to the iommu in PAGE_SIZE chunks, which prevents the iommu from enabling support for larger page sizes. We still need to pin pages, which means we step through them in PAGE_SIZE chunks, but we can batch up contiguous physical memory chunks to allow the iommu the opportunity to use larger pages. The approach here is a bit different that the one currently used for legacy KVM device assignment. Rather than looking at the vma page size and using that as the maximum size to pass to the iommu, we instead simply look at whether the next page is physically contiguous. This means we might ask the iommu to map a 4MB region, while legacy KVM might limit itself to a maximum of 2MB. Splitting our mapping path also allows us to be smarter about locked memory because we can more easily unwind if the user attempts to exceed the limit. Therefore, rather than assuming that a mapping will result in locked memory, we test each page as it is pinned to determine whether it locks RAM vs an mmap'd MMIO region. This should result in better locking granularity and less locked page fudge factors in userspace. The unmap path uses the same algorithm as legacy KVM. We don't want to track the pfn for each mapping ourselves, but we need the pfn in order to unpin pages. We therefore ask the iommu for the iova to physical address translation, ask it to unpin a page, and see how many pages were actually unpinned. iommus supporting large pages will often return something bigger than a page here, which we know will be physically contiguous and we can unpin a batch of pfns. iommus not supporting large mappings won't see an improvement in batching here as they only unmap a page at a time. With this change, we also make a clarification to the API for mapping and unmapping DMA. We can only guarantee unmaps at the same granularity as used for the original mapping. In other words, unmapping a subregion of a previous mapping is not guaranteed and may result in a larger or smaller unmapping than requested. The size field in the unmapping structure is updated to reflect this. Previously this was unmodified on mapping, always returning the the requested unmap size. This is now updated to return the actual unmap size on success, allowing userspace to appropriately track mappings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21 09:38:02 -06:00
/*
* To optimize for fewer iommu_unmap() calls, each of which
* may require hardware cache flushing, try to find the
* largest contiguous physical memory chunk to unmap.
*/
for (len = PAGE_SIZE;
!domain->fgsp && iova + len < end; len += PAGE_SIZE) {
next = iommu_iova_to_phys(domain->domain, iova + len);
if (next != phys + len)
break;
}
unmapped = iommu_unmap(domain->domain, iova, len);
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
if (WARN_ON(!unmapped))
vfio: hugepage support for vfio_iommu_type1 We currently send all mappings to the iommu in PAGE_SIZE chunks, which prevents the iommu from enabling support for larger page sizes. We still need to pin pages, which means we step through them in PAGE_SIZE chunks, but we can batch up contiguous physical memory chunks to allow the iommu the opportunity to use larger pages. The approach here is a bit different that the one currently used for legacy KVM device assignment. Rather than looking at the vma page size and using that as the maximum size to pass to the iommu, we instead simply look at whether the next page is physically contiguous. This means we might ask the iommu to map a 4MB region, while legacy KVM might limit itself to a maximum of 2MB. Splitting our mapping path also allows us to be smarter about locked memory because we can more easily unwind if the user attempts to exceed the limit. Therefore, rather than assuming that a mapping will result in locked memory, we test each page as it is pinned to determine whether it locks RAM vs an mmap'd MMIO region. This should result in better locking granularity and less locked page fudge factors in userspace. The unmap path uses the same algorithm as legacy KVM. We don't want to track the pfn for each mapping ourselves, but we need the pfn in order to unpin pages. We therefore ask the iommu for the iova to physical address translation, ask it to unpin a page, and see how many pages were actually unpinned. iommus supporting large pages will often return something bigger than a page here, which we know will be physically contiguous and we can unpin a batch of pfns. iommus not supporting large mappings won't see an improvement in batching here as they only unmap a page at a time. With this change, we also make a clarification to the API for mapping and unmapping DMA. We can only guarantee unmaps at the same granularity as used for the original mapping. In other words, unmapping a subregion of a previous mapping is not guaranteed and may result in a larger or smaller unmapping than requested. The size field in the unmapping structure is updated to reflect this. Previously this was unmodified on mapping, always returning the the requested unmap size. This is now updated to return the actual unmap size on success, allowing userspace to appropriately track mappings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21 09:38:02 -06:00
break;
unlocked += vfio_unpin_pages(phys >> PAGE_SHIFT,
unmapped >> PAGE_SHIFT,
dma->prot, false);
iova += unmapped;
cond_resched();
}
vfio: hugepage support for vfio_iommu_type1 We currently send all mappings to the iommu in PAGE_SIZE chunks, which prevents the iommu from enabling support for larger page sizes. We still need to pin pages, which means we step through them in PAGE_SIZE chunks, but we can batch up contiguous physical memory chunks to allow the iommu the opportunity to use larger pages. The approach here is a bit different that the one currently used for legacy KVM device assignment. Rather than looking at the vma page size and using that as the maximum size to pass to the iommu, we instead simply look at whether the next page is physically contiguous. This means we might ask the iommu to map a 4MB region, while legacy KVM might limit itself to a maximum of 2MB. Splitting our mapping path also allows us to be smarter about locked memory because we can more easily unwind if the user attempts to exceed the limit. Therefore, rather than assuming that a mapping will result in locked memory, we test each page as it is pinned to determine whether it locks RAM vs an mmap'd MMIO region. This should result in better locking granularity and less locked page fudge factors in userspace. The unmap path uses the same algorithm as legacy KVM. We don't want to track the pfn for each mapping ourselves, but we need the pfn in order to unpin pages. We therefore ask the iommu for the iova to physical address translation, ask it to unpin a page, and see how many pages were actually unpinned. iommus supporting large pages will often return something bigger than a page here, which we know will be physically contiguous and we can unpin a batch of pfns. iommus not supporting large mappings won't see an improvement in batching here as they only unmap a page at a time. With this change, we also make a clarification to the API for mapping and unmapping DMA. We can only guarantee unmaps at the same granularity as used for the original mapping. In other words, unmapping a subregion of a previous mapping is not guaranteed and may result in a larger or smaller unmapping than requested. The size field in the unmapping structure is updated to reflect this. Previously this was unmodified on mapping, always returning the the requested unmap size. This is now updated to return the actual unmap size on success, allowing userspace to appropriately track mappings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21 09:38:02 -06:00
vfio_lock_acct(-unlocked);
}
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
static void vfio_remove_dma(struct vfio_iommu *iommu, struct vfio_dma *dma)
{
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
vfio_unmap_unpin(iommu, dma);
vfio_unlink_dma(iommu, dma);
kfree(dma);
}
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
static unsigned long vfio_pgsize_bitmap(struct vfio_iommu *iommu)
{
struct vfio_domain *domain;
unsigned long bitmap = ULONG_MAX;
vfio: hugepage support for vfio_iommu_type1 We currently send all mappings to the iommu in PAGE_SIZE chunks, which prevents the iommu from enabling support for larger page sizes. We still need to pin pages, which means we step through them in PAGE_SIZE chunks, but we can batch up contiguous physical memory chunks to allow the iommu the opportunity to use larger pages. The approach here is a bit different that the one currently used for legacy KVM device assignment. Rather than looking at the vma page size and using that as the maximum size to pass to the iommu, we instead simply look at whether the next page is physically contiguous. This means we might ask the iommu to map a 4MB region, while legacy KVM might limit itself to a maximum of 2MB. Splitting our mapping path also allows us to be smarter about locked memory because we can more easily unwind if the user attempts to exceed the limit. Therefore, rather than assuming that a mapping will result in locked memory, we test each page as it is pinned to determine whether it locks RAM vs an mmap'd MMIO region. This should result in better locking granularity and less locked page fudge factors in userspace. The unmap path uses the same algorithm as legacy KVM. We don't want to track the pfn for each mapping ourselves, but we need the pfn in order to unpin pages. We therefore ask the iommu for the iova to physical address translation, ask it to unpin a page, and see how many pages were actually unpinned. iommus supporting large pages will often return something bigger than a page here, which we know will be physically contiguous and we can unpin a batch of pfns. iommus not supporting large mappings won't see an improvement in batching here as they only unmap a page at a time. With this change, we also make a clarification to the API for mapping and unmapping DMA. We can only guarantee unmaps at the same granularity as used for the original mapping. In other words, unmapping a subregion of a previous mapping is not guaranteed and may result in a larger or smaller unmapping than requested. The size field in the unmapping structure is updated to reflect this. Previously this was unmodified on mapping, always returning the the requested unmap size. This is now updated to return the actual unmap size on success, allowing userspace to appropriately track mappings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21 09:38:02 -06:00
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
mutex_lock(&iommu->lock);
list_for_each_entry(domain, &iommu->domain_list, next)
bitmap &= domain->domain->ops->pgsize_bitmap;
mutex_unlock(&iommu->lock);
/*
* In case the IOMMU supports page sizes smaller than PAGE_SIZE
* we pretend PAGE_SIZE is supported and hide sub-PAGE_SIZE sizes.
* That way the user will be able to map/unmap buffers whose size/
* start address is aligned with PAGE_SIZE. Pinning code uses that
* granularity while iommu driver can use the sub-PAGE_SIZE size
* to map the buffer.
*/
if (bitmap & ~PAGE_MASK) {
bitmap &= PAGE_MASK;
bitmap |= PAGE_SIZE;
}
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
return bitmap;
}
static int vfio_dma_do_unmap(struct vfio_iommu *iommu,
struct vfio_iommu_type1_dma_unmap *unmap)
{
uint64_t mask;
struct vfio_dma *dma;
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
size_t unmapped = 0;
int ret = 0;
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
mask = ((uint64_t)1 << __ffs(vfio_pgsize_bitmap(iommu))) - 1;
if (unmap->iova & mask)
return -EINVAL;
if (!unmap->size || unmap->size & mask)
return -EINVAL;
WARN_ON(mask & PAGE_MASK);
mutex_lock(&iommu->lock);
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
/*
* vfio-iommu-type1 (v1) - User mappings were coalesced together to
* avoid tracking individual mappings. This means that the granularity
* of the original mapping was lost and the user was allowed to attempt
* to unmap any range. Depending on the contiguousness of physical
* memory and page sizes supported by the IOMMU, arbitrary unmaps may
* or may not have worked. We only guaranteed unmap granularity
* matching the original mapping; even though it was untracked here,
* the original mappings are reflected in IOMMU mappings. This
* resulted in a couple unusual behaviors. First, if a range is not
* able to be unmapped, ex. a set of 4k pages that was mapped as a
* 2M hugepage into the IOMMU, the unmap ioctl returns success but with
* a zero sized unmap. Also, if an unmap request overlaps the first
* address of a hugepage, the IOMMU will unmap the entire hugepage.
* This also returns success and the returned unmap size reflects the
* actual size unmapped.
*
* We attempt to maintain compatibility with this "v1" interface, but
* we take control out of the hands of the IOMMU. Therefore, an unmap
* request offset from the beginning of the original mapping will
* return success with zero sized unmap. And an unmap request covering
* the first iova of mapping will unmap the entire range.
*
* The v2 version of this interface intends to be more deterministic.
* Unmap requests must fully cover previous mappings. Multiple
* mappings may still be unmaped by specifying large ranges, but there
* must not be any previous mappings bisected by the range. An error
* will be returned if these conditions are not met. The v2 interface
* will only return success and a size of zero if there were no
* mappings within the range.
*/
if (iommu->v2) {
dma = vfio_find_dma(iommu, unmap->iova, 0);
if (dma && dma->iova != unmap->iova) {
ret = -EINVAL;
goto unlock;
}
dma = vfio_find_dma(iommu, unmap->iova + unmap->size - 1, 0);
if (dma && dma->iova + dma->size != unmap->iova + unmap->size) {
ret = -EINVAL;
goto unlock;
}
}
vfio: hugepage support for vfio_iommu_type1 We currently send all mappings to the iommu in PAGE_SIZE chunks, which prevents the iommu from enabling support for larger page sizes. We still need to pin pages, which means we step through them in PAGE_SIZE chunks, but we can batch up contiguous physical memory chunks to allow the iommu the opportunity to use larger pages. The approach here is a bit different that the one currently used for legacy KVM device assignment. Rather than looking at the vma page size and using that as the maximum size to pass to the iommu, we instead simply look at whether the next page is physically contiguous. This means we might ask the iommu to map a 4MB region, while legacy KVM might limit itself to a maximum of 2MB. Splitting our mapping path also allows us to be smarter about locked memory because we can more easily unwind if the user attempts to exceed the limit. Therefore, rather than assuming that a mapping will result in locked memory, we test each page as it is pinned to determine whether it locks RAM vs an mmap'd MMIO region. This should result in better locking granularity and less locked page fudge factors in userspace. The unmap path uses the same algorithm as legacy KVM. We don't want to track the pfn for each mapping ourselves, but we need the pfn in order to unpin pages. We therefore ask the iommu for the iova to physical address translation, ask it to unpin a page, and see how many pages were actually unpinned. iommus supporting large pages will often return something bigger than a page here, which we know will be physically contiguous and we can unpin a batch of pfns. iommus not supporting large mappings won't see an improvement in batching here as they only unmap a page at a time. With this change, we also make a clarification to the API for mapping and unmapping DMA. We can only guarantee unmaps at the same granularity as used for the original mapping. In other words, unmapping a subregion of a previous mapping is not guaranteed and may result in a larger or smaller unmapping than requested. The size field in the unmapping structure is updated to reflect this. Previously this was unmodified on mapping, always returning the the requested unmap size. This is now updated to return the actual unmap size on success, allowing userspace to appropriately track mappings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21 09:38:02 -06:00
while ((dma = vfio_find_dma(iommu, unmap->iova, unmap->size))) {
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
if (!iommu->v2 && unmap->iova > dma->iova)
vfio: hugepage support for vfio_iommu_type1 We currently send all mappings to the iommu in PAGE_SIZE chunks, which prevents the iommu from enabling support for larger page sizes. We still need to pin pages, which means we step through them in PAGE_SIZE chunks, but we can batch up contiguous physical memory chunks to allow the iommu the opportunity to use larger pages. The approach here is a bit different that the one currently used for legacy KVM device assignment. Rather than looking at the vma page size and using that as the maximum size to pass to the iommu, we instead simply look at whether the next page is physically contiguous. This means we might ask the iommu to map a 4MB region, while legacy KVM might limit itself to a maximum of 2MB. Splitting our mapping path also allows us to be smarter about locked memory because we can more easily unwind if the user attempts to exceed the limit. Therefore, rather than assuming that a mapping will result in locked memory, we test each page as it is pinned to determine whether it locks RAM vs an mmap'd MMIO region. This should result in better locking granularity and less locked page fudge factors in userspace. The unmap path uses the same algorithm as legacy KVM. We don't want to track the pfn for each mapping ourselves, but we need the pfn in order to unpin pages. We therefore ask the iommu for the iova to physical address translation, ask it to unpin a page, and see how many pages were actually unpinned. iommus supporting large pages will often return something bigger than a page here, which we know will be physically contiguous and we can unpin a batch of pfns. iommus not supporting large mappings won't see an improvement in batching here as they only unmap a page at a time. With this change, we also make a clarification to the API for mapping and unmapping DMA. We can only guarantee unmaps at the same granularity as used for the original mapping. In other words, unmapping a subregion of a previous mapping is not guaranteed and may result in a larger or smaller unmapping than requested. The size field in the unmapping structure is updated to reflect this. Previously this was unmodified on mapping, always returning the the requested unmap size. This is now updated to return the actual unmap size on success, allowing userspace to appropriately track mappings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21 09:38:02 -06:00
break;
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
unmapped += dma->size;
vfio_remove_dma(iommu, dma);
vfio: hugepage support for vfio_iommu_type1 We currently send all mappings to the iommu in PAGE_SIZE chunks, which prevents the iommu from enabling support for larger page sizes. We still need to pin pages, which means we step through them in PAGE_SIZE chunks, but we can batch up contiguous physical memory chunks to allow the iommu the opportunity to use larger pages. The approach here is a bit different that the one currently used for legacy KVM device assignment. Rather than looking at the vma page size and using that as the maximum size to pass to the iommu, we instead simply look at whether the next page is physically contiguous. This means we might ask the iommu to map a 4MB region, while legacy KVM might limit itself to a maximum of 2MB. Splitting our mapping path also allows us to be smarter about locked memory because we can more easily unwind if the user attempts to exceed the limit. Therefore, rather than assuming that a mapping will result in locked memory, we test each page as it is pinned to determine whether it locks RAM vs an mmap'd MMIO region. This should result in better locking granularity and less locked page fudge factors in userspace. The unmap path uses the same algorithm as legacy KVM. We don't want to track the pfn for each mapping ourselves, but we need the pfn in order to unpin pages. We therefore ask the iommu for the iova to physical address translation, ask it to unpin a page, and see how many pages were actually unpinned. iommus supporting large pages will often return something bigger than a page here, which we know will be physically contiguous and we can unpin a batch of pfns. iommus not supporting large mappings won't see an improvement in batching here as they only unmap a page at a time. With this change, we also make a clarification to the API for mapping and unmapping DMA. We can only guarantee unmaps at the same granularity as used for the original mapping. In other words, unmapping a subregion of a previous mapping is not guaranteed and may result in a larger or smaller unmapping than requested. The size field in the unmapping structure is updated to reflect this. Previously this was unmodified on mapping, always returning the the requested unmap size. This is now updated to return the actual unmap size on success, allowing userspace to appropriately track mappings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21 09:38:02 -06:00
}
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
unlock:
mutex_unlock(&iommu->lock);
vfio: hugepage support for vfio_iommu_type1 We currently send all mappings to the iommu in PAGE_SIZE chunks, which prevents the iommu from enabling support for larger page sizes. We still need to pin pages, which means we step through them in PAGE_SIZE chunks, but we can batch up contiguous physical memory chunks to allow the iommu the opportunity to use larger pages. The approach here is a bit different that the one currently used for legacy KVM device assignment. Rather than looking at the vma page size and using that as the maximum size to pass to the iommu, we instead simply look at whether the next page is physically contiguous. This means we might ask the iommu to map a 4MB region, while legacy KVM might limit itself to a maximum of 2MB. Splitting our mapping path also allows us to be smarter about locked memory because we can more easily unwind if the user attempts to exceed the limit. Therefore, rather than assuming that a mapping will result in locked memory, we test each page as it is pinned to determine whether it locks RAM vs an mmap'd MMIO region. This should result in better locking granularity and less locked page fudge factors in userspace. The unmap path uses the same algorithm as legacy KVM. We don't want to track the pfn for each mapping ourselves, but we need the pfn in order to unpin pages. We therefore ask the iommu for the iova to physical address translation, ask it to unpin a page, and see how many pages were actually unpinned. iommus supporting large pages will often return something bigger than a page here, which we know will be physically contiguous and we can unpin a batch of pfns. iommus not supporting large mappings won't see an improvement in batching here as they only unmap a page at a time. With this change, we also make a clarification to the API for mapping and unmapping DMA. We can only guarantee unmaps at the same granularity as used for the original mapping. In other words, unmapping a subregion of a previous mapping is not guaranteed and may result in a larger or smaller unmapping than requested. The size field in the unmapping structure is updated to reflect this. Previously this was unmodified on mapping, always returning the the requested unmap size. This is now updated to return the actual unmap size on success, allowing userspace to appropriately track mappings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21 09:38:02 -06:00
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
/* Report how much was unmapped */
vfio: hugepage support for vfio_iommu_type1 We currently send all mappings to the iommu in PAGE_SIZE chunks, which prevents the iommu from enabling support for larger page sizes. We still need to pin pages, which means we step through them in PAGE_SIZE chunks, but we can batch up contiguous physical memory chunks to allow the iommu the opportunity to use larger pages. The approach here is a bit different that the one currently used for legacy KVM device assignment. Rather than looking at the vma page size and using that as the maximum size to pass to the iommu, we instead simply look at whether the next page is physically contiguous. This means we might ask the iommu to map a 4MB region, while legacy KVM might limit itself to a maximum of 2MB. Splitting our mapping path also allows us to be smarter about locked memory because we can more easily unwind if the user attempts to exceed the limit. Therefore, rather than assuming that a mapping will result in locked memory, we test each page as it is pinned to determine whether it locks RAM vs an mmap'd MMIO region. This should result in better locking granularity and less locked page fudge factors in userspace. The unmap path uses the same algorithm as legacy KVM. We don't want to track the pfn for each mapping ourselves, but we need the pfn in order to unpin pages. We therefore ask the iommu for the iova to physical address translation, ask it to unpin a page, and see how many pages were actually unpinned. iommus supporting large pages will often return something bigger than a page here, which we know will be physically contiguous and we can unpin a batch of pfns. iommus not supporting large mappings won't see an improvement in batching here as they only unmap a page at a time. With this change, we also make a clarification to the API for mapping and unmapping DMA. We can only guarantee unmaps at the same granularity as used for the original mapping. In other words, unmapping a subregion of a previous mapping is not guaranteed and may result in a larger or smaller unmapping than requested. The size field in the unmapping structure is updated to reflect this. Previously this was unmodified on mapping, always returning the the requested unmap size. This is now updated to return the actual unmap size on success, allowing userspace to appropriately track mappings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21 09:38:02 -06:00
unmap->size = unmapped;
return ret;
}
/*
* Turns out AMD IOMMU has a page table bug where it won't map large pages
* to a region that previously mapped smaller pages. This should be fixed
* soon, so this is just a temporary workaround to break mappings down into
* PAGE_SIZE. Better to map smaller pages than nothing.
*/
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
static int map_try_harder(struct vfio_domain *domain, dma_addr_t iova,
vfio: hugepage support for vfio_iommu_type1 We currently send all mappings to the iommu in PAGE_SIZE chunks, which prevents the iommu from enabling support for larger page sizes. We still need to pin pages, which means we step through them in PAGE_SIZE chunks, but we can batch up contiguous physical memory chunks to allow the iommu the opportunity to use larger pages. The approach here is a bit different that the one currently used for legacy KVM device assignment. Rather than looking at the vma page size and using that as the maximum size to pass to the iommu, we instead simply look at whether the next page is physically contiguous. This means we might ask the iommu to map a 4MB region, while legacy KVM might limit itself to a maximum of 2MB. Splitting our mapping path also allows us to be smarter about locked memory because we can more easily unwind if the user attempts to exceed the limit. Therefore, rather than assuming that a mapping will result in locked memory, we test each page as it is pinned to determine whether it locks RAM vs an mmap'd MMIO region. This should result in better locking granularity and less locked page fudge factors in userspace. The unmap path uses the same algorithm as legacy KVM. We don't want to track the pfn for each mapping ourselves, but we need the pfn in order to unpin pages. We therefore ask the iommu for the iova to physical address translation, ask it to unpin a page, and see how many pages were actually unpinned. iommus supporting large pages will often return something bigger than a page here, which we know will be physically contiguous and we can unpin a batch of pfns. iommus not supporting large mappings won't see an improvement in batching here as they only unmap a page at a time. With this change, we also make a clarification to the API for mapping and unmapping DMA. We can only guarantee unmaps at the same granularity as used for the original mapping. In other words, unmapping a subregion of a previous mapping is not guaranteed and may result in a larger or smaller unmapping than requested. The size field in the unmapping structure is updated to reflect this. Previously this was unmodified on mapping, always returning the the requested unmap size. This is now updated to return the actual unmap size on success, allowing userspace to appropriately track mappings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21 09:38:02 -06:00
unsigned long pfn, long npage, int prot)
{
long i;
int ret;
for (i = 0; i < npage; i++, pfn++, iova += PAGE_SIZE) {
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
ret = iommu_map(domain->domain, iova,
vfio: hugepage support for vfio_iommu_type1 We currently send all mappings to the iommu in PAGE_SIZE chunks, which prevents the iommu from enabling support for larger page sizes. We still need to pin pages, which means we step through them in PAGE_SIZE chunks, but we can batch up contiguous physical memory chunks to allow the iommu the opportunity to use larger pages. The approach here is a bit different that the one currently used for legacy KVM device assignment. Rather than looking at the vma page size and using that as the maximum size to pass to the iommu, we instead simply look at whether the next page is physically contiguous. This means we might ask the iommu to map a 4MB region, while legacy KVM might limit itself to a maximum of 2MB. Splitting our mapping path also allows us to be smarter about locked memory because we can more easily unwind if the user attempts to exceed the limit. Therefore, rather than assuming that a mapping will result in locked memory, we test each page as it is pinned to determine whether it locks RAM vs an mmap'd MMIO region. This should result in better locking granularity and less locked page fudge factors in userspace. The unmap path uses the same algorithm as legacy KVM. We don't want to track the pfn for each mapping ourselves, but we need the pfn in order to unpin pages. We therefore ask the iommu for the iova to physical address translation, ask it to unpin a page, and see how many pages were actually unpinned. iommus supporting large pages will often return something bigger than a page here, which we know will be physically contiguous and we can unpin a batch of pfns. iommus not supporting large mappings won't see an improvement in batching here as they only unmap a page at a time. With this change, we also make a clarification to the API for mapping and unmapping DMA. We can only guarantee unmaps at the same granularity as used for the original mapping. In other words, unmapping a subregion of a previous mapping is not guaranteed and may result in a larger or smaller unmapping than requested. The size field in the unmapping structure is updated to reflect this. Previously this was unmodified on mapping, always returning the the requested unmap size. This is now updated to return the actual unmap size on success, allowing userspace to appropriately track mappings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21 09:38:02 -06:00
(phys_addr_t)pfn << PAGE_SHIFT,
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
PAGE_SIZE, prot | domain->prot);
vfio: hugepage support for vfio_iommu_type1 We currently send all mappings to the iommu in PAGE_SIZE chunks, which prevents the iommu from enabling support for larger page sizes. We still need to pin pages, which means we step through them in PAGE_SIZE chunks, but we can batch up contiguous physical memory chunks to allow the iommu the opportunity to use larger pages. The approach here is a bit different that the one currently used for legacy KVM device assignment. Rather than looking at the vma page size and using that as the maximum size to pass to the iommu, we instead simply look at whether the next page is physically contiguous. This means we might ask the iommu to map a 4MB region, while legacy KVM might limit itself to a maximum of 2MB. Splitting our mapping path also allows us to be smarter about locked memory because we can more easily unwind if the user attempts to exceed the limit. Therefore, rather than assuming that a mapping will result in locked memory, we test each page as it is pinned to determine whether it locks RAM vs an mmap'd MMIO region. This should result in better locking granularity and less locked page fudge factors in userspace. The unmap path uses the same algorithm as legacy KVM. We don't want to track the pfn for each mapping ourselves, but we need the pfn in order to unpin pages. We therefore ask the iommu for the iova to physical address translation, ask it to unpin a page, and see how many pages were actually unpinned. iommus supporting large pages will often return something bigger than a page here, which we know will be physically contiguous and we can unpin a batch of pfns. iommus not supporting large mappings won't see an improvement in batching here as they only unmap a page at a time. With this change, we also make a clarification to the API for mapping and unmapping DMA. We can only guarantee unmaps at the same granularity as used for the original mapping. In other words, unmapping a subregion of a previous mapping is not guaranteed and may result in a larger or smaller unmapping than requested. The size field in the unmapping structure is updated to reflect this. Previously this was unmodified on mapping, always returning the the requested unmap size. This is now updated to return the actual unmap size on success, allowing userspace to appropriately track mappings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21 09:38:02 -06:00
if (ret)
break;
}
for (; i < npage && i > 0; i--, iova -= PAGE_SIZE)
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
iommu_unmap(domain->domain, iova, PAGE_SIZE);
return ret;
}
static int vfio_iommu_map(struct vfio_iommu *iommu, dma_addr_t iova,
unsigned long pfn, long npage, int prot)
{
struct vfio_domain *d;
int ret;
list_for_each_entry(d, &iommu->domain_list, next) {
ret = iommu_map(d->domain, iova, (phys_addr_t)pfn << PAGE_SHIFT,
npage << PAGE_SHIFT, prot | d->prot);
if (ret) {
if (ret != -EBUSY ||
map_try_harder(d, iova, pfn, npage, prot))
goto unwind;
}
cond_resched();
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
}
return 0;
unwind:
list_for_each_entry_continue_reverse(d, &iommu->domain_list, next)
iommu_unmap(d->domain, iova, npage << PAGE_SHIFT);
vfio: hugepage support for vfio_iommu_type1 We currently send all mappings to the iommu in PAGE_SIZE chunks, which prevents the iommu from enabling support for larger page sizes. We still need to pin pages, which means we step through them in PAGE_SIZE chunks, but we can batch up contiguous physical memory chunks to allow the iommu the opportunity to use larger pages. The approach here is a bit different that the one currently used for legacy KVM device assignment. Rather than looking at the vma page size and using that as the maximum size to pass to the iommu, we instead simply look at whether the next page is physically contiguous. This means we might ask the iommu to map a 4MB region, while legacy KVM might limit itself to a maximum of 2MB. Splitting our mapping path also allows us to be smarter about locked memory because we can more easily unwind if the user attempts to exceed the limit. Therefore, rather than assuming that a mapping will result in locked memory, we test each page as it is pinned to determine whether it locks RAM vs an mmap'd MMIO region. This should result in better locking granularity and less locked page fudge factors in userspace. The unmap path uses the same algorithm as legacy KVM. We don't want to track the pfn for each mapping ourselves, but we need the pfn in order to unpin pages. We therefore ask the iommu for the iova to physical address translation, ask it to unpin a page, and see how many pages were actually unpinned. iommus supporting large pages will often return something bigger than a page here, which we know will be physically contiguous and we can unpin a batch of pfns. iommus not supporting large mappings won't see an improvement in batching here as they only unmap a page at a time. With this change, we also make a clarification to the API for mapping and unmapping DMA. We can only guarantee unmaps at the same granularity as used for the original mapping. In other words, unmapping a subregion of a previous mapping is not guaranteed and may result in a larger or smaller unmapping than requested. The size field in the unmapping structure is updated to reflect this. Previously this was unmodified on mapping, always returning the the requested unmap size. This is now updated to return the actual unmap size on success, allowing userspace to appropriately track mappings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21 09:38:02 -06:00
return ret;
}
static int vfio_dma_do_map(struct vfio_iommu *iommu,
struct vfio_iommu_type1_dma_map *map)
{
dma_addr_t iova = map->iova;
vfio: hugepage support for vfio_iommu_type1 We currently send all mappings to the iommu in PAGE_SIZE chunks, which prevents the iommu from enabling support for larger page sizes. We still need to pin pages, which means we step through them in PAGE_SIZE chunks, but we can batch up contiguous physical memory chunks to allow the iommu the opportunity to use larger pages. The approach here is a bit different that the one currently used for legacy KVM device assignment. Rather than looking at the vma page size and using that as the maximum size to pass to the iommu, we instead simply look at whether the next page is physically contiguous. This means we might ask the iommu to map a 4MB region, while legacy KVM might limit itself to a maximum of 2MB. Splitting our mapping path also allows us to be smarter about locked memory because we can more easily unwind if the user attempts to exceed the limit. Therefore, rather than assuming that a mapping will result in locked memory, we test each page as it is pinned to determine whether it locks RAM vs an mmap'd MMIO region. This should result in better locking granularity and less locked page fudge factors in userspace. The unmap path uses the same algorithm as legacy KVM. We don't want to track the pfn for each mapping ourselves, but we need the pfn in order to unpin pages. We therefore ask the iommu for the iova to physical address translation, ask it to unpin a page, and see how many pages were actually unpinned. iommus supporting large pages will often return something bigger than a page here, which we know will be physically contiguous and we can unpin a batch of pfns. iommus not supporting large mappings won't see an improvement in batching here as they only unmap a page at a time. With this change, we also make a clarification to the API for mapping and unmapping DMA. We can only guarantee unmaps at the same granularity as used for the original mapping. In other words, unmapping a subregion of a previous mapping is not guaranteed and may result in a larger or smaller unmapping than requested. The size field in the unmapping structure is updated to reflect this. Previously this was unmodified on mapping, always returning the the requested unmap size. This is now updated to return the actual unmap size on success, allowing userspace to appropriately track mappings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21 09:38:02 -06:00
unsigned long vaddr = map->vaddr;
size_t size = map->size;
vfio: hugepage support for vfio_iommu_type1 We currently send all mappings to the iommu in PAGE_SIZE chunks, which prevents the iommu from enabling support for larger page sizes. We still need to pin pages, which means we step through them in PAGE_SIZE chunks, but we can batch up contiguous physical memory chunks to allow the iommu the opportunity to use larger pages. The approach here is a bit different that the one currently used for legacy KVM device assignment. Rather than looking at the vma page size and using that as the maximum size to pass to the iommu, we instead simply look at whether the next page is physically contiguous. This means we might ask the iommu to map a 4MB region, while legacy KVM might limit itself to a maximum of 2MB. Splitting our mapping path also allows us to be smarter about locked memory because we can more easily unwind if the user attempts to exceed the limit. Therefore, rather than assuming that a mapping will result in locked memory, we test each page as it is pinned to determine whether it locks RAM vs an mmap'd MMIO region. This should result in better locking granularity and less locked page fudge factors in userspace. The unmap path uses the same algorithm as legacy KVM. We don't want to track the pfn for each mapping ourselves, but we need the pfn in order to unpin pages. We therefore ask the iommu for the iova to physical address translation, ask it to unpin a page, and see how many pages were actually unpinned. iommus supporting large pages will often return something bigger than a page here, which we know will be physically contiguous and we can unpin a batch of pfns. iommus not supporting large mappings won't see an improvement in batching here as they only unmap a page at a time. With this change, we also make a clarification to the API for mapping and unmapping DMA. We can only guarantee unmaps at the same granularity as used for the original mapping. In other words, unmapping a subregion of a previous mapping is not guaranteed and may result in a larger or smaller unmapping than requested. The size field in the unmapping structure is updated to reflect this. Previously this was unmodified on mapping, always returning the the requested unmap size. This is now updated to return the actual unmap size on success, allowing userspace to appropriately track mappings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21 09:38:02 -06:00
long npage;
int ret = 0, prot = 0;
uint64_t mask;
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
struct vfio_dma *dma;
unsigned long pfn;
vfio: hugepage support for vfio_iommu_type1 We currently send all mappings to the iommu in PAGE_SIZE chunks, which prevents the iommu from enabling support for larger page sizes. We still need to pin pages, which means we step through them in PAGE_SIZE chunks, but we can batch up contiguous physical memory chunks to allow the iommu the opportunity to use larger pages. The approach here is a bit different that the one currently used for legacy KVM device assignment. Rather than looking at the vma page size and using that as the maximum size to pass to the iommu, we instead simply look at whether the next page is physically contiguous. This means we might ask the iommu to map a 4MB region, while legacy KVM might limit itself to a maximum of 2MB. Splitting our mapping path also allows us to be smarter about locked memory because we can more easily unwind if the user attempts to exceed the limit. Therefore, rather than assuming that a mapping will result in locked memory, we test each page as it is pinned to determine whether it locks RAM vs an mmap'd MMIO region. This should result in better locking granularity and less locked page fudge factors in userspace. The unmap path uses the same algorithm as legacy KVM. We don't want to track the pfn for each mapping ourselves, but we need the pfn in order to unpin pages. We therefore ask the iommu for the iova to physical address translation, ask it to unpin a page, and see how many pages were actually unpinned. iommus supporting large pages will often return something bigger than a page here, which we know will be physically contiguous and we can unpin a batch of pfns. iommus not supporting large mappings won't see an improvement in batching here as they only unmap a page at a time. With this change, we also make a clarification to the API for mapping and unmapping DMA. We can only guarantee unmaps at the same granularity as used for the original mapping. In other words, unmapping a subregion of a previous mapping is not guaranteed and may result in a larger or smaller unmapping than requested. The size field in the unmapping structure is updated to reflect this. Previously this was unmodified on mapping, always returning the the requested unmap size. This is now updated to return the actual unmap size on success, allowing userspace to appropriately track mappings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21 09:38:02 -06:00
/* Verify that none of our __u64 fields overflow */
if (map->size != size || map->vaddr != vaddr || map->iova != iova)
return -EINVAL;
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
mask = ((uint64_t)1 << __ffs(vfio_pgsize_bitmap(iommu))) - 1;
WARN_ON(mask & PAGE_MASK);
/* READ/WRITE from device perspective */
if (map->flags & VFIO_DMA_MAP_FLAG_WRITE)
prot |= IOMMU_WRITE;
if (map->flags & VFIO_DMA_MAP_FLAG_READ)
prot |= IOMMU_READ;
if (!prot || !size || (size | iova | vaddr) & mask)
return -EINVAL;
/* Don't allow IOVA or virtual address wrap */
if (iova + size - 1 < iova || vaddr + size - 1 < vaddr)
return -EINVAL;
mutex_lock(&iommu->lock);
if (vfio_find_dma(iommu, iova, size)) {
vfio: hugepage support for vfio_iommu_type1 We currently send all mappings to the iommu in PAGE_SIZE chunks, which prevents the iommu from enabling support for larger page sizes. We still need to pin pages, which means we step through them in PAGE_SIZE chunks, but we can batch up contiguous physical memory chunks to allow the iommu the opportunity to use larger pages. The approach here is a bit different that the one currently used for legacy KVM device assignment. Rather than looking at the vma page size and using that as the maximum size to pass to the iommu, we instead simply look at whether the next page is physically contiguous. This means we might ask the iommu to map a 4MB region, while legacy KVM might limit itself to a maximum of 2MB. Splitting our mapping path also allows us to be smarter about locked memory because we can more easily unwind if the user attempts to exceed the limit. Therefore, rather than assuming that a mapping will result in locked memory, we test each page as it is pinned to determine whether it locks RAM vs an mmap'd MMIO region. This should result in better locking granularity and less locked page fudge factors in userspace. The unmap path uses the same algorithm as legacy KVM. We don't want to track the pfn for each mapping ourselves, but we need the pfn in order to unpin pages. We therefore ask the iommu for the iova to physical address translation, ask it to unpin a page, and see how many pages were actually unpinned. iommus supporting large pages will often return something bigger than a page here, which we know will be physically contiguous and we can unpin a batch of pfns. iommus not supporting large mappings won't see an improvement in batching here as they only unmap a page at a time. With this change, we also make a clarification to the API for mapping and unmapping DMA. We can only guarantee unmaps at the same granularity as used for the original mapping. In other words, unmapping a subregion of a previous mapping is not guaranteed and may result in a larger or smaller unmapping than requested. The size field in the unmapping structure is updated to reflect this. Previously this was unmodified on mapping, always returning the the requested unmap size. This is now updated to return the actual unmap size on success, allowing userspace to appropriately track mappings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21 09:38:02 -06:00
mutex_unlock(&iommu->lock);
return -EEXIST;
}
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
dma = kzalloc(sizeof(*dma), GFP_KERNEL);
if (!dma) {
mutex_unlock(&iommu->lock);
return -ENOMEM;
}
dma->iova = iova;
dma->vaddr = vaddr;
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
dma->prot = prot;
vfio: hugepage support for vfio_iommu_type1 We currently send all mappings to the iommu in PAGE_SIZE chunks, which prevents the iommu from enabling support for larger page sizes. We still need to pin pages, which means we step through them in PAGE_SIZE chunks, but we can batch up contiguous physical memory chunks to allow the iommu the opportunity to use larger pages. The approach here is a bit different that the one currently used for legacy KVM device assignment. Rather than looking at the vma page size and using that as the maximum size to pass to the iommu, we instead simply look at whether the next page is physically contiguous. This means we might ask the iommu to map a 4MB region, while legacy KVM might limit itself to a maximum of 2MB. Splitting our mapping path also allows us to be smarter about locked memory because we can more easily unwind if the user attempts to exceed the limit. Therefore, rather than assuming that a mapping will result in locked memory, we test each page as it is pinned to determine whether it locks RAM vs an mmap'd MMIO region. This should result in better locking granularity and less locked page fudge factors in userspace. The unmap path uses the same algorithm as legacy KVM. We don't want to track the pfn for each mapping ourselves, but we need the pfn in order to unpin pages. We therefore ask the iommu for the iova to physical address translation, ask it to unpin a page, and see how many pages were actually unpinned. iommus supporting large pages will often return something bigger than a page here, which we know will be physically contiguous and we can unpin a batch of pfns. iommus not supporting large mappings won't see an improvement in batching here as they only unmap a page at a time. With this change, we also make a clarification to the API for mapping and unmapping DMA. We can only guarantee unmaps at the same granularity as used for the original mapping. In other words, unmapping a subregion of a previous mapping is not guaranteed and may result in a larger or smaller unmapping than requested. The size field in the unmapping structure is updated to reflect this. Previously this was unmodified on mapping, always returning the the requested unmap size. This is now updated to return the actual unmap size on success, allowing userspace to appropriately track mappings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21 09:38:02 -06:00
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
/* Insert zero-sized and grow as we map chunks of it */
vfio_link_dma(iommu, dma);
vfio: hugepage support for vfio_iommu_type1 We currently send all mappings to the iommu in PAGE_SIZE chunks, which prevents the iommu from enabling support for larger page sizes. We still need to pin pages, which means we step through them in PAGE_SIZE chunks, but we can batch up contiguous physical memory chunks to allow the iommu the opportunity to use larger pages. The approach here is a bit different that the one currently used for legacy KVM device assignment. Rather than looking at the vma page size and using that as the maximum size to pass to the iommu, we instead simply look at whether the next page is physically contiguous. This means we might ask the iommu to map a 4MB region, while legacy KVM might limit itself to a maximum of 2MB. Splitting our mapping path also allows us to be smarter about locked memory because we can more easily unwind if the user attempts to exceed the limit. Therefore, rather than assuming that a mapping will result in locked memory, we test each page as it is pinned to determine whether it locks RAM vs an mmap'd MMIO region. This should result in better locking granularity and less locked page fudge factors in userspace. The unmap path uses the same algorithm as legacy KVM. We don't want to track the pfn for each mapping ourselves, but we need the pfn in order to unpin pages. We therefore ask the iommu for the iova to physical address translation, ask it to unpin a page, and see how many pages were actually unpinned. iommus supporting large pages will often return something bigger than a page here, which we know will be physically contiguous and we can unpin a batch of pfns. iommus not supporting large mappings won't see an improvement in batching here as they only unmap a page at a time. With this change, we also make a clarification to the API for mapping and unmapping DMA. We can only guarantee unmaps at the same granularity as used for the original mapping. In other words, unmapping a subregion of a previous mapping is not guaranteed and may result in a larger or smaller unmapping than requested. The size field in the unmapping structure is updated to reflect this. Previously this was unmodified on mapping, always returning the the requested unmap size. This is now updated to return the actual unmap size on success, allowing userspace to appropriately track mappings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21 09:38:02 -06:00
while (size) {
vfio: hugepage support for vfio_iommu_type1 We currently send all mappings to the iommu in PAGE_SIZE chunks, which prevents the iommu from enabling support for larger page sizes. We still need to pin pages, which means we step through them in PAGE_SIZE chunks, but we can batch up contiguous physical memory chunks to allow the iommu the opportunity to use larger pages. The approach here is a bit different that the one currently used for legacy KVM device assignment. Rather than looking at the vma page size and using that as the maximum size to pass to the iommu, we instead simply look at whether the next page is physically contiguous. This means we might ask the iommu to map a 4MB region, while legacy KVM might limit itself to a maximum of 2MB. Splitting our mapping path also allows us to be smarter about locked memory because we can more easily unwind if the user attempts to exceed the limit. Therefore, rather than assuming that a mapping will result in locked memory, we test each page as it is pinned to determine whether it locks RAM vs an mmap'd MMIO region. This should result in better locking granularity and less locked page fudge factors in userspace. The unmap path uses the same algorithm as legacy KVM. We don't want to track the pfn for each mapping ourselves, but we need the pfn in order to unpin pages. We therefore ask the iommu for the iova to physical address translation, ask it to unpin a page, and see how many pages were actually unpinned. iommus supporting large pages will often return something bigger than a page here, which we know will be physically contiguous and we can unpin a batch of pfns. iommus not supporting large mappings won't see an improvement in batching here as they only unmap a page at a time. With this change, we also make a clarification to the API for mapping and unmapping DMA. We can only guarantee unmaps at the same granularity as used for the original mapping. In other words, unmapping a subregion of a previous mapping is not guaranteed and may result in a larger or smaller unmapping than requested. The size field in the unmapping structure is updated to reflect this. Previously this was unmodified on mapping, always returning the the requested unmap size. This is now updated to return the actual unmap size on success, allowing userspace to appropriately track mappings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21 09:38:02 -06:00
/* Pin a contiguous chunk of memory */
npage = vfio_pin_pages(vaddr + dma->size,
size >> PAGE_SHIFT, prot, &pfn);
vfio: hugepage support for vfio_iommu_type1 We currently send all mappings to the iommu in PAGE_SIZE chunks, which prevents the iommu from enabling support for larger page sizes. We still need to pin pages, which means we step through them in PAGE_SIZE chunks, but we can batch up contiguous physical memory chunks to allow the iommu the opportunity to use larger pages. The approach here is a bit different that the one currently used for legacy KVM device assignment. Rather than looking at the vma page size and using that as the maximum size to pass to the iommu, we instead simply look at whether the next page is physically contiguous. This means we might ask the iommu to map a 4MB region, while legacy KVM might limit itself to a maximum of 2MB. Splitting our mapping path also allows us to be smarter about locked memory because we can more easily unwind if the user attempts to exceed the limit. Therefore, rather than assuming that a mapping will result in locked memory, we test each page as it is pinned to determine whether it locks RAM vs an mmap'd MMIO region. This should result in better locking granularity and less locked page fudge factors in userspace. The unmap path uses the same algorithm as legacy KVM. We don't want to track the pfn for each mapping ourselves, but we need the pfn in order to unpin pages. We therefore ask the iommu for the iova to physical address translation, ask it to unpin a page, and see how many pages were actually unpinned. iommus supporting large pages will often return something bigger than a page here, which we know will be physically contiguous and we can unpin a batch of pfns. iommus not supporting large mappings won't see an improvement in batching here as they only unmap a page at a time. With this change, we also make a clarification to the API for mapping and unmapping DMA. We can only guarantee unmaps at the same granularity as used for the original mapping. In other words, unmapping a subregion of a previous mapping is not guaranteed and may result in a larger or smaller unmapping than requested. The size field in the unmapping structure is updated to reflect this. Previously this was unmodified on mapping, always returning the the requested unmap size. This is now updated to return the actual unmap size on success, allowing userspace to appropriately track mappings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21 09:38:02 -06:00
if (npage <= 0) {
WARN_ON(!npage);
ret = (int)npage;
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
break;
vfio: hugepage support for vfio_iommu_type1 We currently send all mappings to the iommu in PAGE_SIZE chunks, which prevents the iommu from enabling support for larger page sizes. We still need to pin pages, which means we step through them in PAGE_SIZE chunks, but we can batch up contiguous physical memory chunks to allow the iommu the opportunity to use larger pages. The approach here is a bit different that the one currently used for legacy KVM device assignment. Rather than looking at the vma page size and using that as the maximum size to pass to the iommu, we instead simply look at whether the next page is physically contiguous. This means we might ask the iommu to map a 4MB region, while legacy KVM might limit itself to a maximum of 2MB. Splitting our mapping path also allows us to be smarter about locked memory because we can more easily unwind if the user attempts to exceed the limit. Therefore, rather than assuming that a mapping will result in locked memory, we test each page as it is pinned to determine whether it locks RAM vs an mmap'd MMIO region. This should result in better locking granularity and less locked page fudge factors in userspace. The unmap path uses the same algorithm as legacy KVM. We don't want to track the pfn for each mapping ourselves, but we need the pfn in order to unpin pages. We therefore ask the iommu for the iova to physical address translation, ask it to unpin a page, and see how many pages were actually unpinned. iommus supporting large pages will often return something bigger than a page here, which we know will be physically contiguous and we can unpin a batch of pfns. iommus not supporting large mappings won't see an improvement in batching here as they only unmap a page at a time. With this change, we also make a clarification to the API for mapping and unmapping DMA. We can only guarantee unmaps at the same granularity as used for the original mapping. In other words, unmapping a subregion of a previous mapping is not guaranteed and may result in a larger or smaller unmapping than requested. The size field in the unmapping structure is updated to reflect this. Previously this was unmodified on mapping, always returning the the requested unmap size. This is now updated to return the actual unmap size on success, allowing userspace to appropriately track mappings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21 09:38:02 -06:00
}
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
/* Map it! */
ret = vfio_iommu_map(iommu, iova + dma->size, pfn, npage, prot);
vfio: hugepage support for vfio_iommu_type1 We currently send all mappings to the iommu in PAGE_SIZE chunks, which prevents the iommu from enabling support for larger page sizes. We still need to pin pages, which means we step through them in PAGE_SIZE chunks, but we can batch up contiguous physical memory chunks to allow the iommu the opportunity to use larger pages. The approach here is a bit different that the one currently used for legacy KVM device assignment. Rather than looking at the vma page size and using that as the maximum size to pass to the iommu, we instead simply look at whether the next page is physically contiguous. This means we might ask the iommu to map a 4MB region, while legacy KVM might limit itself to a maximum of 2MB. Splitting our mapping path also allows us to be smarter about locked memory because we can more easily unwind if the user attempts to exceed the limit. Therefore, rather than assuming that a mapping will result in locked memory, we test each page as it is pinned to determine whether it locks RAM vs an mmap'd MMIO region. This should result in better locking granularity and less locked page fudge factors in userspace. The unmap path uses the same algorithm as legacy KVM. We don't want to track the pfn for each mapping ourselves, but we need the pfn in order to unpin pages. We therefore ask the iommu for the iova to physical address translation, ask it to unpin a page, and see how many pages were actually unpinned. iommus supporting large pages will often return something bigger than a page here, which we know will be physically contiguous and we can unpin a batch of pfns. iommus not supporting large mappings won't see an improvement in batching here as they only unmap a page at a time. With this change, we also make a clarification to the API for mapping and unmapping DMA. We can only guarantee unmaps at the same granularity as used for the original mapping. In other words, unmapping a subregion of a previous mapping is not guaranteed and may result in a larger or smaller unmapping than requested. The size field in the unmapping structure is updated to reflect this. Previously this was unmodified on mapping, always returning the the requested unmap size. This is now updated to return the actual unmap size on success, allowing userspace to appropriately track mappings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21 09:38:02 -06:00
if (ret) {
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
vfio_unpin_pages(pfn, npage, prot, true);
break;
vfio: hugepage support for vfio_iommu_type1 We currently send all mappings to the iommu in PAGE_SIZE chunks, which prevents the iommu from enabling support for larger page sizes. We still need to pin pages, which means we step through them in PAGE_SIZE chunks, but we can batch up contiguous physical memory chunks to allow the iommu the opportunity to use larger pages. The approach here is a bit different that the one currently used for legacy KVM device assignment. Rather than looking at the vma page size and using that as the maximum size to pass to the iommu, we instead simply look at whether the next page is physically contiguous. This means we might ask the iommu to map a 4MB region, while legacy KVM might limit itself to a maximum of 2MB. Splitting our mapping path also allows us to be smarter about locked memory because we can more easily unwind if the user attempts to exceed the limit. Therefore, rather than assuming that a mapping will result in locked memory, we test each page as it is pinned to determine whether it locks RAM vs an mmap'd MMIO region. This should result in better locking granularity and less locked page fudge factors in userspace. The unmap path uses the same algorithm as legacy KVM. We don't want to track the pfn for each mapping ourselves, but we need the pfn in order to unpin pages. We therefore ask the iommu for the iova to physical address translation, ask it to unpin a page, and see how many pages were actually unpinned. iommus supporting large pages will often return something bigger than a page here, which we know will be physically contiguous and we can unpin a batch of pfns. iommus not supporting large mappings won't see an improvement in batching here as they only unmap a page at a time. With this change, we also make a clarification to the API for mapping and unmapping DMA. We can only guarantee unmaps at the same granularity as used for the original mapping. In other words, unmapping a subregion of a previous mapping is not guaranteed and may result in a larger or smaller unmapping than requested. The size field in the unmapping structure is updated to reflect this. Previously this was unmodified on mapping, always returning the the requested unmap size. This is now updated to return the actual unmap size on success, allowing userspace to appropriately track mappings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21 09:38:02 -06:00
}
size -= npage << PAGE_SHIFT;
dma->size += npage << PAGE_SHIFT;
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
}
vfio: hugepage support for vfio_iommu_type1 We currently send all mappings to the iommu in PAGE_SIZE chunks, which prevents the iommu from enabling support for larger page sizes. We still need to pin pages, which means we step through them in PAGE_SIZE chunks, but we can batch up contiguous physical memory chunks to allow the iommu the opportunity to use larger pages. The approach here is a bit different that the one currently used for legacy KVM device assignment. Rather than looking at the vma page size and using that as the maximum size to pass to the iommu, we instead simply look at whether the next page is physically contiguous. This means we might ask the iommu to map a 4MB region, while legacy KVM might limit itself to a maximum of 2MB. Splitting our mapping path also allows us to be smarter about locked memory because we can more easily unwind if the user attempts to exceed the limit. Therefore, rather than assuming that a mapping will result in locked memory, we test each page as it is pinned to determine whether it locks RAM vs an mmap'd MMIO region. This should result in better locking granularity and less locked page fudge factors in userspace. The unmap path uses the same algorithm as legacy KVM. We don't want to track the pfn for each mapping ourselves, but we need the pfn in order to unpin pages. We therefore ask the iommu for the iova to physical address translation, ask it to unpin a page, and see how many pages were actually unpinned. iommus supporting large pages will often return something bigger than a page here, which we know will be physically contiguous and we can unpin a batch of pfns. iommus not supporting large mappings won't see an improvement in batching here as they only unmap a page at a time. With this change, we also make a clarification to the API for mapping and unmapping DMA. We can only guarantee unmaps at the same granularity as used for the original mapping. In other words, unmapping a subregion of a previous mapping is not guaranteed and may result in a larger or smaller unmapping than requested. The size field in the unmapping structure is updated to reflect this. Previously this was unmodified on mapping, always returning the the requested unmap size. This is now updated to return the actual unmap size on success, allowing userspace to appropriately track mappings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21 09:38:02 -06:00
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
if (ret)
vfio_remove_dma(iommu, dma);
vfio: hugepage support for vfio_iommu_type1 We currently send all mappings to the iommu in PAGE_SIZE chunks, which prevents the iommu from enabling support for larger page sizes. We still need to pin pages, which means we step through them in PAGE_SIZE chunks, but we can batch up contiguous physical memory chunks to allow the iommu the opportunity to use larger pages. The approach here is a bit different that the one currently used for legacy KVM device assignment. Rather than looking at the vma page size and using that as the maximum size to pass to the iommu, we instead simply look at whether the next page is physically contiguous. This means we might ask the iommu to map a 4MB region, while legacy KVM might limit itself to a maximum of 2MB. Splitting our mapping path also allows us to be smarter about locked memory because we can more easily unwind if the user attempts to exceed the limit. Therefore, rather than assuming that a mapping will result in locked memory, we test each page as it is pinned to determine whether it locks RAM vs an mmap'd MMIO region. This should result in better locking granularity and less locked page fudge factors in userspace. The unmap path uses the same algorithm as legacy KVM. We don't want to track the pfn for each mapping ourselves, but we need the pfn in order to unpin pages. We therefore ask the iommu for the iova to physical address translation, ask it to unpin a page, and see how many pages were actually unpinned. iommus supporting large pages will often return something bigger than a page here, which we know will be physically contiguous and we can unpin a batch of pfns. iommus not supporting large mappings won't see an improvement in batching here as they only unmap a page at a time. With this change, we also make a clarification to the API for mapping and unmapping DMA. We can only guarantee unmaps at the same granularity as used for the original mapping. In other words, unmapping a subregion of a previous mapping is not guaranteed and may result in a larger or smaller unmapping than requested. The size field in the unmapping structure is updated to reflect this. Previously this was unmodified on mapping, always returning the the requested unmap size. This is now updated to return the actual unmap size on success, allowing userspace to appropriately track mappings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21 09:38:02 -06:00
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
mutex_unlock(&iommu->lock);
return ret;
}
static int vfio_bus_type(struct device *dev, void *data)
{
struct bus_type **bus = data;
if (*bus && *bus != dev->bus)
return -EINVAL;
*bus = dev->bus;
return 0;
}
static int vfio_iommu_replay(struct vfio_iommu *iommu,
struct vfio_domain *domain)
{
struct vfio_domain *d;
struct rb_node *n;
int ret;
/* Arbitrarily pick the first domain in the list for lookups */
d = list_first_entry(&iommu->domain_list, struct vfio_domain, next);
n = rb_first(&iommu->dma_list);
/* If there's not a domain, there better not be any mappings */
if (WARN_ON(n && !d))
return -EINVAL;
for (; n; n = rb_next(n)) {
struct vfio_dma *dma;
dma_addr_t iova;
dma = rb_entry(n, struct vfio_dma, node);
iova = dma->iova;
while (iova < dma->iova + dma->size) {
phys_addr_t phys = iommu_iova_to_phys(d->domain, iova);
size_t size;
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
if (WARN_ON(!phys)) {
iova += PAGE_SIZE;
continue;
vfio: hugepage support for vfio_iommu_type1 We currently send all mappings to the iommu in PAGE_SIZE chunks, which prevents the iommu from enabling support for larger page sizes. We still need to pin pages, which means we step through them in PAGE_SIZE chunks, but we can batch up contiguous physical memory chunks to allow the iommu the opportunity to use larger pages. The approach here is a bit different that the one currently used for legacy KVM device assignment. Rather than looking at the vma page size and using that as the maximum size to pass to the iommu, we instead simply look at whether the next page is physically contiguous. This means we might ask the iommu to map a 4MB region, while legacy KVM might limit itself to a maximum of 2MB. Splitting our mapping path also allows us to be smarter about locked memory because we can more easily unwind if the user attempts to exceed the limit. Therefore, rather than assuming that a mapping will result in locked memory, we test each page as it is pinned to determine whether it locks RAM vs an mmap'd MMIO region. This should result in better locking granularity and less locked page fudge factors in userspace. The unmap path uses the same algorithm as legacy KVM. We don't want to track the pfn for each mapping ourselves, but we need the pfn in order to unpin pages. We therefore ask the iommu for the iova to physical address translation, ask it to unpin a page, and see how many pages were actually unpinned. iommus supporting large pages will often return something bigger than a page here, which we know will be physically contiguous and we can unpin a batch of pfns. iommus not supporting large mappings won't see an improvement in batching here as they only unmap a page at a time. With this change, we also make a clarification to the API for mapping and unmapping DMA. We can only guarantee unmaps at the same granularity as used for the original mapping. In other words, unmapping a subregion of a previous mapping is not guaranteed and may result in a larger or smaller unmapping than requested. The size field in the unmapping structure is updated to reflect this. Previously this was unmodified on mapping, always returning the the requested unmap size. This is now updated to return the actual unmap size on success, allowing userspace to appropriately track mappings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21 09:38:02 -06:00
}
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
size = PAGE_SIZE;
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
while (iova + size < dma->iova + dma->size &&
phys + size == iommu_iova_to_phys(d->domain,
iova + size))
size += PAGE_SIZE;
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
ret = iommu_map(domain->domain, iova, phys,
size, dma->prot | domain->prot);
if (ret)
return ret;
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
iova += size;
}
vfio: hugepage support for vfio_iommu_type1 We currently send all mappings to the iommu in PAGE_SIZE chunks, which prevents the iommu from enabling support for larger page sizes. We still need to pin pages, which means we step through them in PAGE_SIZE chunks, but we can batch up contiguous physical memory chunks to allow the iommu the opportunity to use larger pages. The approach here is a bit different that the one currently used for legacy KVM device assignment. Rather than looking at the vma page size and using that as the maximum size to pass to the iommu, we instead simply look at whether the next page is physically contiguous. This means we might ask the iommu to map a 4MB region, while legacy KVM might limit itself to a maximum of 2MB. Splitting our mapping path also allows us to be smarter about locked memory because we can more easily unwind if the user attempts to exceed the limit. Therefore, rather than assuming that a mapping will result in locked memory, we test each page as it is pinned to determine whether it locks RAM vs an mmap'd MMIO region. This should result in better locking granularity and less locked page fudge factors in userspace. The unmap path uses the same algorithm as legacy KVM. We don't want to track the pfn for each mapping ourselves, but we need the pfn in order to unpin pages. We therefore ask the iommu for the iova to physical address translation, ask it to unpin a page, and see how many pages were actually unpinned. iommus supporting large pages will often return something bigger than a page here, which we know will be physically contiguous and we can unpin a batch of pfns. iommus not supporting large mappings won't see an improvement in batching here as they only unmap a page at a time. With this change, we also make a clarification to the API for mapping and unmapping DMA. We can only guarantee unmaps at the same granularity as used for the original mapping. In other words, unmapping a subregion of a previous mapping is not guaranteed and may result in a larger or smaller unmapping than requested. The size field in the unmapping structure is updated to reflect this. Previously this was unmodified on mapping, always returning the the requested unmap size. This is now updated to return the actual unmap size on success, allowing userspace to appropriately track mappings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21 09:38:02 -06:00
}
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
return 0;
}
/*
* We change our unmap behavior slightly depending on whether the IOMMU
* supports fine-grained superpages. IOMMUs like AMD-Vi will use a superpage
* for practically any contiguous power-of-two mapping we give it. This means
* we don't need to look for contiguous chunks ourselves to make unmapping
* more efficient. On IOMMUs with coarse-grained super pages, like Intel VT-d
* with discrete 2M/1G/512G/1T superpages, identifying contiguous chunks
* significantly boosts non-hugetlbfs mappings and doesn't seem to hurt when
* hugetlbfs is in use.
*/
static void vfio_test_domain_fgsp(struct vfio_domain *domain)
{
struct page *pages;
int ret, order = get_order(PAGE_SIZE * 2);
pages = alloc_pages(GFP_KERNEL | __GFP_ZERO, order);
if (!pages)
return;
ret = iommu_map(domain->domain, 0, page_to_phys(pages), PAGE_SIZE * 2,
IOMMU_READ | IOMMU_WRITE | domain->prot);
if (!ret) {
size_t unmapped = iommu_unmap(domain->domain, 0, PAGE_SIZE);
if (unmapped == PAGE_SIZE)
iommu_unmap(domain->domain, PAGE_SIZE, PAGE_SIZE);
else
domain->fgsp = true;
}
__free_pages(pages, order);
}
static int vfio_iommu_type1_attach_group(void *iommu_data,
struct iommu_group *iommu_group)
{
struct vfio_iommu *iommu = iommu_data;
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
struct vfio_group *group, *g;
struct vfio_domain *domain, *d;
struct bus_type *bus = NULL;
int ret;
mutex_lock(&iommu->lock);
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
list_for_each_entry(d, &iommu->domain_list, next) {
list_for_each_entry(g, &d->group_list, next) {
if (g->iommu_group != iommu_group)
continue;
mutex_unlock(&iommu->lock);
return -EINVAL;
}
}
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
group = kzalloc(sizeof(*group), GFP_KERNEL);
domain = kzalloc(sizeof(*domain), GFP_KERNEL);
if (!group || !domain) {
ret = -ENOMEM;
goto out_free;
}
group->iommu_group = iommu_group;
/* Determine bus_type in order to allocate a domain */
ret = iommu_group_for_each_dev(iommu_group, &bus, vfio_bus_type);
if (ret)
goto out_free;
domain->domain = iommu_domain_alloc(bus);
if (!domain->domain) {
ret = -EIO;
goto out_free;
}
if (iommu->nesting) {
int attr = 1;
ret = iommu_domain_set_attr(domain->domain, DOMAIN_ATTR_NESTING,
&attr);
if (ret)
goto out_domain;
}
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
ret = iommu_attach_group(domain->domain, iommu_group);
if (ret)
goto out_domain;
INIT_LIST_HEAD(&domain->group_list);
list_add(&group->next, &domain->group_list);
if (!allow_unsafe_interrupts &&
!iommu_capable(bus, IOMMU_CAP_INTR_REMAP)) {
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
pr_warn("%s: No interrupt remapping support. Use the module param \"allow_unsafe_interrupts\" to enable VFIO IOMMU support on this platform\n",
__func__);
ret = -EPERM;
goto out_detach;
}
if (iommu_capable(bus, IOMMU_CAP_CACHE_COHERENCY))
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
domain->prot |= IOMMU_CACHE;
/*
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
* Try to match an existing compatible domain. We don't want to
* preclude an IOMMU driver supporting multiple bus_types and being
* able to include different bus_types in the same IOMMU domain, so
* we test whether the domains use the same iommu_ops rather than
* testing if they're on the same bus_type.
*/
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
list_for_each_entry(d, &iommu->domain_list, next) {
if (d->domain->ops == domain->domain->ops &&
d->prot == domain->prot) {
iommu_detach_group(domain->domain, iommu_group);
if (!iommu_attach_group(d->domain, iommu_group)) {
list_add(&group->next, &d->group_list);
iommu_domain_free(domain->domain);
kfree(domain);
mutex_unlock(&iommu->lock);
return 0;
}
ret = iommu_attach_group(domain->domain, iommu_group);
if (ret)
goto out_domain;
}
}
vfio_test_domain_fgsp(domain);
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
/* replay mappings on new domains */
ret = vfio_iommu_replay(iommu, domain);
if (ret)
goto out_detach;
list_add(&domain->next, &iommu->domain_list);
mutex_unlock(&iommu->lock);
return 0;
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
out_detach:
iommu_detach_group(domain->domain, iommu_group);
out_domain:
iommu_domain_free(domain->domain);
out_free:
kfree(domain);
kfree(group);
mutex_unlock(&iommu->lock);
return ret;
}
static void vfio_iommu_unmap_unpin_all(struct vfio_iommu *iommu)
{
struct rb_node *node;
while ((node = rb_first(&iommu->dma_list)))
vfio_remove_dma(iommu, rb_entry(node, struct vfio_dma, node));
}
static void vfio_iommu_type1_detach_group(void *iommu_data,
struct iommu_group *iommu_group)
{
struct vfio_iommu *iommu = iommu_data;
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
struct vfio_domain *domain;
struct vfio_group *group;
mutex_lock(&iommu->lock);
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
list_for_each_entry(domain, &iommu->domain_list, next) {
list_for_each_entry(group, &domain->group_list, next) {
if (group->iommu_group != iommu_group)
continue;
iommu_detach_group(domain->domain, iommu_group);
list_del(&group->next);
kfree(group);
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
/*
* Group ownership provides privilege, if the group
* list is empty, the domain goes away. If it's the
* last domain, then all the mappings go away too.
*/
if (list_empty(&domain->group_list)) {
if (list_is_singular(&iommu->domain_list))
vfio_iommu_unmap_unpin_all(iommu);
iommu_domain_free(domain->domain);
list_del(&domain->next);
kfree(domain);
}
goto done;
}
}
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
done:
mutex_unlock(&iommu->lock);
}
static void *vfio_iommu_type1_open(unsigned long arg)
{
struct vfio_iommu *iommu;
iommu = kzalloc(sizeof(*iommu), GFP_KERNEL);
if (!iommu)
return ERR_PTR(-ENOMEM);
switch (arg) {
case VFIO_TYPE1_IOMMU:
break;
case VFIO_TYPE1_NESTING_IOMMU:
iommu->nesting = true;
case VFIO_TYPE1v2_IOMMU:
iommu->v2 = true;
break;
default:
kfree(iommu);
return ERR_PTR(-EINVAL);
}
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
INIT_LIST_HEAD(&iommu->domain_list);
iommu->dma_list = RB_ROOT;
mutex_init(&iommu->lock);
return iommu;
}
static void vfio_iommu_type1_release(void *iommu_data)
{
struct vfio_iommu *iommu = iommu_data;
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
struct vfio_domain *domain, *domain_tmp;
struct vfio_group *group, *group_tmp;
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
vfio_iommu_unmap_unpin_all(iommu);
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
list_for_each_entry_safe(domain, domain_tmp,
&iommu->domain_list, next) {
list_for_each_entry_safe(group, group_tmp,
&domain->group_list, next) {
iommu_detach_group(domain->domain, group->iommu_group);
list_del(&group->next);
kfree(group);
}
iommu_domain_free(domain->domain);
list_del(&domain->next);
kfree(domain);
}
kfree(iommu);
}
static int vfio_domains_have_iommu_cache(struct vfio_iommu *iommu)
{
struct vfio_domain *domain;
int ret = 1;
mutex_lock(&iommu->lock);
list_for_each_entry(domain, &iommu->domain_list, next) {
if (!(domain->prot & IOMMU_CACHE)) {
ret = 0;
break;
}
}
mutex_unlock(&iommu->lock);
return ret;
}
static long vfio_iommu_type1_ioctl(void *iommu_data,
unsigned int cmd, unsigned long arg)
{
struct vfio_iommu *iommu = iommu_data;
unsigned long minsz;
if (cmd == VFIO_CHECK_EXTENSION) {
switch (arg) {
case VFIO_TYPE1_IOMMU:
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
case VFIO_TYPE1v2_IOMMU:
case VFIO_TYPE1_NESTING_IOMMU:
return 1;
case VFIO_DMA_CC_IOMMU:
if (!iommu)
return 0;
return vfio_domains_have_iommu_cache(iommu);
default:
return 0;
}
} else if (cmd == VFIO_IOMMU_GET_INFO) {
struct vfio_iommu_type1_info info;
minsz = offsetofend(struct vfio_iommu_type1_info, iova_pgsizes);
if (copy_from_user(&info, (void __user *)arg, minsz))
return -EFAULT;
if (info.argsz < minsz)
return -EINVAL;
info.flags = 0;
vfio/iommu_type1: Multi-IOMMU domain support We currently have a problem that we cannot support advanced features of an IOMMU domain (ex. IOMMU_CACHE), because we have no guarantee that those features will be supported by all of the hardware units involved with the domain over its lifetime. For instance, the Intel VT-d architecture does not require that all DRHDs support snoop control. If we create a domain based on a device behind a DRHD that does support snoop control and enable SNP support via the IOMMU_CACHE mapping option, we cannot then add a device behind a DRHD which does not support snoop control or we'll get reserved bit faults from the SNP bit in the pagetables. To add to the complexity, we can't know the properties of a domain until a device is attached. We could pass this problem off to userspace and require that a separate vfio container be used, but we don't know how to handle page accounting in that case. How do we know that a page pinned in one container is the same page as a different container and avoid double billing the user for the page. The solution is therefore to support multiple IOMMU domains per container. In the majority of cases, only one domain will be required since hardware is typically consistent within a system. However, this provides us the ability to validate compatibility of domains and support mixed environments where page table flags can be different between domains. To do this, our DMA tracking needs to change. We currently try to coalesce user mappings into as few tracking entries as possible. The problem then becomes that we lose granularity of user mappings. We've never guaranteed that a user is able to unmap at a finer granularity than the original mapping, but we must honor the granularity of the original mapping. This coalescing code is therefore removed, allowing only unmaps covering complete maps. The change in accounting is fairly small here, a typical QEMU VM will start out with roughly a dozen entries, so it's arguable if this coalescing was ever needed. We also move IOMMU domain creation to the point where a group is attached to the container. An interesting side-effect of this is that we now have access to the device at the time of domain creation and can probe the devices within the group to determine the bus_type. This finally makes vfio_iommu_type1 completely device/bus agnostic. In fact, each IOMMU domain can host devices on different buses managed by different physical IOMMUs, and present a single DMA mapping interface to the user. When a new domain is created, mappings are replayed to bring the IOMMU pagetables up to the state of the current container. And of course, DMA mapping and unmapping automatically traverse all of the configured IOMMU domains. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: Varun Sethi <Varun.Sethi@freescale.com>
2014-02-26 11:38:36 -07:00
info.iova_pgsizes = vfio_pgsize_bitmap(iommu);
return copy_to_user((void __user *)arg, &info, minsz);
} else if (cmd == VFIO_IOMMU_MAP_DMA) {
struct vfio_iommu_type1_dma_map map;
uint32_t mask = VFIO_DMA_MAP_FLAG_READ |
VFIO_DMA_MAP_FLAG_WRITE;
minsz = offsetofend(struct vfio_iommu_type1_dma_map, size);
if (copy_from_user(&map, (void __user *)arg, minsz))
return -EFAULT;
if (map.argsz < minsz || map.flags & ~mask)
return -EINVAL;
return vfio_dma_do_map(iommu, &map);
} else if (cmd == VFIO_IOMMU_UNMAP_DMA) {
struct vfio_iommu_type1_dma_unmap unmap;
vfio: hugepage support for vfio_iommu_type1 We currently send all mappings to the iommu in PAGE_SIZE chunks, which prevents the iommu from enabling support for larger page sizes. We still need to pin pages, which means we step through them in PAGE_SIZE chunks, but we can batch up contiguous physical memory chunks to allow the iommu the opportunity to use larger pages. The approach here is a bit different that the one currently used for legacy KVM device assignment. Rather than looking at the vma page size and using that as the maximum size to pass to the iommu, we instead simply look at whether the next page is physically contiguous. This means we might ask the iommu to map a 4MB region, while legacy KVM might limit itself to a maximum of 2MB. Splitting our mapping path also allows us to be smarter about locked memory because we can more easily unwind if the user attempts to exceed the limit. Therefore, rather than assuming that a mapping will result in locked memory, we test each page as it is pinned to determine whether it locks RAM vs an mmap'd MMIO region. This should result in better locking granularity and less locked page fudge factors in userspace. The unmap path uses the same algorithm as legacy KVM. We don't want to track the pfn for each mapping ourselves, but we need the pfn in order to unpin pages. We therefore ask the iommu for the iova to physical address translation, ask it to unpin a page, and see how many pages were actually unpinned. iommus supporting large pages will often return something bigger than a page here, which we know will be physically contiguous and we can unpin a batch of pfns. iommus not supporting large mappings won't see an improvement in batching here as they only unmap a page at a time. With this change, we also make a clarification to the API for mapping and unmapping DMA. We can only guarantee unmaps at the same granularity as used for the original mapping. In other words, unmapping a subregion of a previous mapping is not guaranteed and may result in a larger or smaller unmapping than requested. The size field in the unmapping structure is updated to reflect this. Previously this was unmodified on mapping, always returning the the requested unmap size. This is now updated to return the actual unmap size on success, allowing userspace to appropriately track mappings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21 09:38:02 -06:00
long ret;
minsz = offsetofend(struct vfio_iommu_type1_dma_unmap, size);
if (copy_from_user(&unmap, (void __user *)arg, minsz))
return -EFAULT;
if (unmap.argsz < minsz || unmap.flags)
return -EINVAL;
vfio: hugepage support for vfio_iommu_type1 We currently send all mappings to the iommu in PAGE_SIZE chunks, which prevents the iommu from enabling support for larger page sizes. We still need to pin pages, which means we step through them in PAGE_SIZE chunks, but we can batch up contiguous physical memory chunks to allow the iommu the opportunity to use larger pages. The approach here is a bit different that the one currently used for legacy KVM device assignment. Rather than looking at the vma page size and using that as the maximum size to pass to the iommu, we instead simply look at whether the next page is physically contiguous. This means we might ask the iommu to map a 4MB region, while legacy KVM might limit itself to a maximum of 2MB. Splitting our mapping path also allows us to be smarter about locked memory because we can more easily unwind if the user attempts to exceed the limit. Therefore, rather than assuming that a mapping will result in locked memory, we test each page as it is pinned to determine whether it locks RAM vs an mmap'd MMIO region. This should result in better locking granularity and less locked page fudge factors in userspace. The unmap path uses the same algorithm as legacy KVM. We don't want to track the pfn for each mapping ourselves, but we need the pfn in order to unpin pages. We therefore ask the iommu for the iova to physical address translation, ask it to unpin a page, and see how many pages were actually unpinned. iommus supporting large pages will often return something bigger than a page here, which we know will be physically contiguous and we can unpin a batch of pfns. iommus not supporting large mappings won't see an improvement in batching here as they only unmap a page at a time. With this change, we also make a clarification to the API for mapping and unmapping DMA. We can only guarantee unmaps at the same granularity as used for the original mapping. In other words, unmapping a subregion of a previous mapping is not guaranteed and may result in a larger or smaller unmapping than requested. The size field in the unmapping structure is updated to reflect this. Previously this was unmodified on mapping, always returning the the requested unmap size. This is now updated to return the actual unmap size on success, allowing userspace to appropriately track mappings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21 09:38:02 -06:00
ret = vfio_dma_do_unmap(iommu, &unmap);
if (ret)
return ret;
return copy_to_user((void __user *)arg, &unmap, minsz);
}
return -ENOTTY;
}
static const struct vfio_iommu_driver_ops vfio_iommu_driver_ops_type1 = {
.name = "vfio-iommu-type1",
.owner = THIS_MODULE,
.open = vfio_iommu_type1_open,
.release = vfio_iommu_type1_release,
.ioctl = vfio_iommu_type1_ioctl,
.attach_group = vfio_iommu_type1_attach_group,
.detach_group = vfio_iommu_type1_detach_group,
};
static int __init vfio_iommu_type1_init(void)
{
return vfio_register_iommu_driver(&vfio_iommu_driver_ops_type1);
}
static void __exit vfio_iommu_type1_cleanup(void)
{
vfio_unregister_iommu_driver(&vfio_iommu_driver_ops_type1);
}
module_init(vfio_iommu_type1_init);
module_exit(vfio_iommu_type1_cleanup);
MODULE_VERSION(DRIVER_VERSION);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);