alistair23-linux/arch/arm/mach-omap2/omap-wakeupgen.c

545 lines
14 KiB
C
Raw Normal View History

/*
* OMAP WakeupGen Source file
*
* OMAP WakeupGen is the interrupt controller extension used along
* with ARM GIC to wake the CPU out from low power states on
* external interrupts. It is responsible for generating wakeup
* event from the incoming interrupts and enable bits. It is
* implemented in MPU always ON power domain. During normal operation,
* WakeupGen delivers external interrupts directly to the GIC.
*
* Copyright (C) 2011 Texas Instruments, Inc.
* Santosh Shilimkar <santosh.shilimkar@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/irq.h>
ARM: omap: convert wakeupgen to stacked domains OMAP4/5 has been (ab)using the gic_arch_extn to provide wakeup from suspend, and it makes a lot of sense to convert this code to use stacked domains instead. This patch does just this, updating the DT files to actually reflect what the HW provides. BIG FAT WARNING: because the DTs were so far lying by not exposing the WUGEN HW block, kernels with this patch applied won't have any suspend-resume facility when booted with old DTs, and old kernels with updated DTs won't even boot. On a platform with this patch applied, the system looks like this: root@bacon-fat:~# cat /proc/interrupts CPU0 CPU1 16: 0 0 WUGEN 37 gp_timer 19: 233799 155916 GIC 27 arch_timer 23: 0 0 WUGEN 9 l3-dbg-irq 24: 1 0 WUGEN 10 l3-app-irq 27: 282 0 WUGEN 13 omap-dma-engine 44: 0 0 4ae10000.gpio 13 DMA 294: 0 0 WUGEN 20 gpmc 297: 506 0 WUGEN 56 48070000.i2c 298: 0 0 WUGEN 57 48072000.i2c 299: 0 0 WUGEN 61 48060000.i2c 300: 0 0 WUGEN 62 4807a000.i2c 301: 8 0 WUGEN 60 4807c000.i2c 308: 2439 0 WUGEN 74 OMAP UART2 312: 362 0 WUGEN 83 mmc2 313: 502 0 WUGEN 86 mmc0 314: 13 0 WUGEN 94 mmc1 350: 0 0 PRCM pinctrl, pinctrl 406: 35155709 0 GIC 109 ehci_hcd:usb1 407: 0 0 WUGEN 7 palmas 409: 0 0 WUGEN 119 twl6040 410: 0 0 twl6040 5 twl6040_irq_ready 411: 0 0 twl6040 0 twl6040_irq_th IPI0: 0 1 CPU wakeup interrupts IPI1: 0 0 Timer broadcast interrupts IPI2: 95334 902334 Rescheduling interrupts IPI3: 0 0 Function call interrupts IPI4: 479 648 Single function call interrupts IPI5: 0 0 CPU stop interrupts IPI6: 0 0 IRQ work interrupts IPI7: 0 0 completion interrupts Err: 0 Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1426088629-15377-8-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2015-03-11 09:43:49 -06:00
#include <linux/irqdomain.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
#include <linux/cpu.h>
#include <linux/notifier.h>
#include <linux/cpu_pm.h>
#include "omap-wakeupgen.h"
#include "omap-secure.h"
ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+ As the plat and mach includes need to disappear for single zImage work, we need to remove plat/hardware.h. Do this by splitting plat/hardware.h into omap1 and omap2+ specific files. The old plat/hardware.h already has omap1 only defines, so it gets moved to mach/hardware.h for omap1. For omap2+, we use the local soc.h that for now just includes the related SoC headers to keep this patch more readable. Note that the local soc.h still includes plat/cpu.h that can be dealt with in later patches. Let's also include plat/serial.h from common.h for all the board-*.c files. This allows making the include files local later on without patching these files again. Note that only minimal changes are done in this patch for the drivers/watchdog/omap_wdt.c driver to keep things compiling. Further patches are needed to eventually remove cpu_is_omap usage in the drivers. Also only minimal changes are done to sound/soc/omap/* to remove the unneeded includes and to define OMAP44XX_MCPDM_L3_BASE locally so there's no need to include omap44xx.h. While at it, also sort some of the includes in the standard way. Cc: linux-watchdog@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Liam Girdwood <lrg@ti.com> Acked-by: Wim Van Sebroeck <wim@iguana.be> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-08-31 11:59:07 -06:00
#include "soc.h"
#include "omap4-sar-layout.h"
#include "common.h"
#include "pm.h"
#define AM43XX_NR_REG_BANKS 7
#define AM43XX_IRQS 224
#define MAX_NR_REG_BANKS AM43XX_NR_REG_BANKS
#define MAX_IRQS AM43XX_IRQS
#define DEFAULT_NR_REG_BANKS 5
#define DEFAULT_IRQS 160
#define WKG_MASK_ALL 0x00000000
#define WKG_UNMASK_ALL 0xffffffff
#define CPU_ENA_OFFSET 0x400
#define CPU0_ID 0x0
#define CPU1_ID 0x1
#define OMAP4_NR_BANKS 4
#define OMAP4_NR_IRQS 128
static void __iomem *wakeupgen_base;
static void __iomem *sar_base;
static DEFINE_RAW_SPINLOCK(wakeupgen_lock);
static unsigned int irq_target_cpu[MAX_IRQS];
static unsigned int irq_banks = DEFAULT_NR_REG_BANKS;
static unsigned int max_irqs = DEFAULT_IRQS;
static unsigned int omap_secure_apis;
/*
* Static helper functions.
*/
static inline u32 wakeupgen_readl(u8 idx, u32 cpu)
{
return readl_relaxed(wakeupgen_base + OMAP_WKG_ENB_A_0 +
(cpu * CPU_ENA_OFFSET) + (idx * 4));
}
static inline void wakeupgen_writel(u32 val, u8 idx, u32 cpu)
{
writel_relaxed(val, wakeupgen_base + OMAP_WKG_ENB_A_0 +
(cpu * CPU_ENA_OFFSET) + (idx * 4));
}
static inline void sar_writel(u32 val, u32 offset, u8 idx)
{
writel_relaxed(val, sar_base + offset + (idx * 4));
}
static inline int _wakeupgen_get_irq_info(u32 irq, u32 *bit_posn, u8 *reg_index)
{
/*
* Each WakeupGen register controls 32 interrupt.
* i.e. 1 bit per SPI IRQ
*/
ARM: omap: convert wakeupgen to stacked domains OMAP4/5 has been (ab)using the gic_arch_extn to provide wakeup from suspend, and it makes a lot of sense to convert this code to use stacked domains instead. This patch does just this, updating the DT files to actually reflect what the HW provides. BIG FAT WARNING: because the DTs were so far lying by not exposing the WUGEN HW block, kernels with this patch applied won't have any suspend-resume facility when booted with old DTs, and old kernels with updated DTs won't even boot. On a platform with this patch applied, the system looks like this: root@bacon-fat:~# cat /proc/interrupts CPU0 CPU1 16: 0 0 WUGEN 37 gp_timer 19: 233799 155916 GIC 27 arch_timer 23: 0 0 WUGEN 9 l3-dbg-irq 24: 1 0 WUGEN 10 l3-app-irq 27: 282 0 WUGEN 13 omap-dma-engine 44: 0 0 4ae10000.gpio 13 DMA 294: 0 0 WUGEN 20 gpmc 297: 506 0 WUGEN 56 48070000.i2c 298: 0 0 WUGEN 57 48072000.i2c 299: 0 0 WUGEN 61 48060000.i2c 300: 0 0 WUGEN 62 4807a000.i2c 301: 8 0 WUGEN 60 4807c000.i2c 308: 2439 0 WUGEN 74 OMAP UART2 312: 362 0 WUGEN 83 mmc2 313: 502 0 WUGEN 86 mmc0 314: 13 0 WUGEN 94 mmc1 350: 0 0 PRCM pinctrl, pinctrl 406: 35155709 0 GIC 109 ehci_hcd:usb1 407: 0 0 WUGEN 7 palmas 409: 0 0 WUGEN 119 twl6040 410: 0 0 twl6040 5 twl6040_irq_ready 411: 0 0 twl6040 0 twl6040_irq_th IPI0: 0 1 CPU wakeup interrupts IPI1: 0 0 Timer broadcast interrupts IPI2: 95334 902334 Rescheduling interrupts IPI3: 0 0 Function call interrupts IPI4: 479 648 Single function call interrupts IPI5: 0 0 CPU stop interrupts IPI6: 0 0 IRQ work interrupts IPI7: 0 0 completion interrupts Err: 0 Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1426088629-15377-8-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2015-03-11 09:43:49 -06:00
*reg_index = irq >> 5;
*bit_posn = irq %= 32;
return 0;
}
static void _wakeupgen_clear(unsigned int irq, unsigned int cpu)
{
u32 val, bit_number;
u8 i;
if (_wakeupgen_get_irq_info(irq, &bit_number, &i))
return;
val = wakeupgen_readl(i, cpu);
val &= ~BIT(bit_number);
wakeupgen_writel(val, i, cpu);
}
static void _wakeupgen_set(unsigned int irq, unsigned int cpu)
{
u32 val, bit_number;
u8 i;
if (_wakeupgen_get_irq_info(irq, &bit_number, &i))
return;
val = wakeupgen_readl(i, cpu);
val |= BIT(bit_number);
wakeupgen_writel(val, i, cpu);
}
/*
* Architecture specific Mask extension
*/
static void wakeupgen_mask(struct irq_data *d)
{
unsigned long flags;
raw_spin_lock_irqsave(&wakeupgen_lock, flags);
_wakeupgen_clear(d->hwirq, irq_target_cpu[d->hwirq]);
raw_spin_unlock_irqrestore(&wakeupgen_lock, flags);
ARM: omap: convert wakeupgen to stacked domains OMAP4/5 has been (ab)using the gic_arch_extn to provide wakeup from suspend, and it makes a lot of sense to convert this code to use stacked domains instead. This patch does just this, updating the DT files to actually reflect what the HW provides. BIG FAT WARNING: because the DTs were so far lying by not exposing the WUGEN HW block, kernels with this patch applied won't have any suspend-resume facility when booted with old DTs, and old kernels with updated DTs won't even boot. On a platform with this patch applied, the system looks like this: root@bacon-fat:~# cat /proc/interrupts CPU0 CPU1 16: 0 0 WUGEN 37 gp_timer 19: 233799 155916 GIC 27 arch_timer 23: 0 0 WUGEN 9 l3-dbg-irq 24: 1 0 WUGEN 10 l3-app-irq 27: 282 0 WUGEN 13 omap-dma-engine 44: 0 0 4ae10000.gpio 13 DMA 294: 0 0 WUGEN 20 gpmc 297: 506 0 WUGEN 56 48070000.i2c 298: 0 0 WUGEN 57 48072000.i2c 299: 0 0 WUGEN 61 48060000.i2c 300: 0 0 WUGEN 62 4807a000.i2c 301: 8 0 WUGEN 60 4807c000.i2c 308: 2439 0 WUGEN 74 OMAP UART2 312: 362 0 WUGEN 83 mmc2 313: 502 0 WUGEN 86 mmc0 314: 13 0 WUGEN 94 mmc1 350: 0 0 PRCM pinctrl, pinctrl 406: 35155709 0 GIC 109 ehci_hcd:usb1 407: 0 0 WUGEN 7 palmas 409: 0 0 WUGEN 119 twl6040 410: 0 0 twl6040 5 twl6040_irq_ready 411: 0 0 twl6040 0 twl6040_irq_th IPI0: 0 1 CPU wakeup interrupts IPI1: 0 0 Timer broadcast interrupts IPI2: 95334 902334 Rescheduling interrupts IPI3: 0 0 Function call interrupts IPI4: 479 648 Single function call interrupts IPI5: 0 0 CPU stop interrupts IPI6: 0 0 IRQ work interrupts IPI7: 0 0 completion interrupts Err: 0 Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1426088629-15377-8-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2015-03-11 09:43:49 -06:00
irq_chip_mask_parent(d);
}
/*
* Architecture specific Unmask extension
*/
static void wakeupgen_unmask(struct irq_data *d)
{
unsigned long flags;
raw_spin_lock_irqsave(&wakeupgen_lock, flags);
_wakeupgen_set(d->hwirq, irq_target_cpu[d->hwirq]);
raw_spin_unlock_irqrestore(&wakeupgen_lock, flags);
ARM: omap: convert wakeupgen to stacked domains OMAP4/5 has been (ab)using the gic_arch_extn to provide wakeup from suspend, and it makes a lot of sense to convert this code to use stacked domains instead. This patch does just this, updating the DT files to actually reflect what the HW provides. BIG FAT WARNING: because the DTs were so far lying by not exposing the WUGEN HW block, kernels with this patch applied won't have any suspend-resume facility when booted with old DTs, and old kernels with updated DTs won't even boot. On a platform with this patch applied, the system looks like this: root@bacon-fat:~# cat /proc/interrupts CPU0 CPU1 16: 0 0 WUGEN 37 gp_timer 19: 233799 155916 GIC 27 arch_timer 23: 0 0 WUGEN 9 l3-dbg-irq 24: 1 0 WUGEN 10 l3-app-irq 27: 282 0 WUGEN 13 omap-dma-engine 44: 0 0 4ae10000.gpio 13 DMA 294: 0 0 WUGEN 20 gpmc 297: 506 0 WUGEN 56 48070000.i2c 298: 0 0 WUGEN 57 48072000.i2c 299: 0 0 WUGEN 61 48060000.i2c 300: 0 0 WUGEN 62 4807a000.i2c 301: 8 0 WUGEN 60 4807c000.i2c 308: 2439 0 WUGEN 74 OMAP UART2 312: 362 0 WUGEN 83 mmc2 313: 502 0 WUGEN 86 mmc0 314: 13 0 WUGEN 94 mmc1 350: 0 0 PRCM pinctrl, pinctrl 406: 35155709 0 GIC 109 ehci_hcd:usb1 407: 0 0 WUGEN 7 palmas 409: 0 0 WUGEN 119 twl6040 410: 0 0 twl6040 5 twl6040_irq_ready 411: 0 0 twl6040 0 twl6040_irq_th IPI0: 0 1 CPU wakeup interrupts IPI1: 0 0 Timer broadcast interrupts IPI2: 95334 902334 Rescheduling interrupts IPI3: 0 0 Function call interrupts IPI4: 479 648 Single function call interrupts IPI5: 0 0 CPU stop interrupts IPI6: 0 0 IRQ work interrupts IPI7: 0 0 completion interrupts Err: 0 Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1426088629-15377-8-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2015-03-11 09:43:49 -06:00
irq_chip_unmask_parent(d);
}
#ifdef CONFIG_HOTPLUG_CPU
static DEFINE_PER_CPU(u32 [MAX_NR_REG_BANKS], irqmasks);
static void _wakeupgen_save_masks(unsigned int cpu)
{
u8 i;
for (i = 0; i < irq_banks; i++)
per_cpu(irqmasks, cpu)[i] = wakeupgen_readl(i, cpu);
}
static void _wakeupgen_restore_masks(unsigned int cpu)
{
u8 i;
for (i = 0; i < irq_banks; i++)
wakeupgen_writel(per_cpu(irqmasks, cpu)[i], i, cpu);
}
static void _wakeupgen_set_all(unsigned int cpu, unsigned int reg)
{
u8 i;
for (i = 0; i < irq_banks; i++)
wakeupgen_writel(reg, i, cpu);
}
/*
* Mask or unmask all interrupts on given CPU.
* 0 = Mask all interrupts on the 'cpu'
* 1 = Unmask all interrupts on the 'cpu'
* Ensure that the initial mask is maintained. This is faster than
* iterating through GIC registers to arrive at the correct masks.
*/
static void wakeupgen_irqmask_all(unsigned int cpu, unsigned int set)
{
unsigned long flags;
raw_spin_lock_irqsave(&wakeupgen_lock, flags);
if (set) {
_wakeupgen_save_masks(cpu);
_wakeupgen_set_all(cpu, WKG_MASK_ALL);
} else {
_wakeupgen_set_all(cpu, WKG_UNMASK_ALL);
_wakeupgen_restore_masks(cpu);
}
raw_spin_unlock_irqrestore(&wakeupgen_lock, flags);
}
#endif
#ifdef CONFIG_CPU_PM
static inline void omap4_irq_save_context(void)
{
u32 i, val;
if (omap_rev() == OMAP4430_REV_ES1_0)
return;
for (i = 0; i < irq_banks; i++) {
/* Save the CPUx interrupt mask for IRQ 0 to 127 */
val = wakeupgen_readl(i, 0);
sar_writel(val, WAKEUPGENENB_OFFSET_CPU0, i);
val = wakeupgen_readl(i, 1);
sar_writel(val, WAKEUPGENENB_OFFSET_CPU1, i);
/*
* Disable the secure interrupts for CPUx. The restore
* code blindly restores secure and non-secure interrupt
* masks from SAR RAM. Secure interrupts are not suppose
* to be enabled from HLOS. So overwrite the SAR location
* so that the secure interrupt remains disabled.
*/
sar_writel(0x0, WAKEUPGENENB_SECURE_OFFSET_CPU0, i);
sar_writel(0x0, WAKEUPGENENB_SECURE_OFFSET_CPU1, i);
}
/* Save AuxBoot* registers */
val = readl_relaxed(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
writel_relaxed(val, sar_base + AUXCOREBOOT0_OFFSET);
val = readl_relaxed(wakeupgen_base + OMAP_AUX_CORE_BOOT_1);
writel_relaxed(val, sar_base + AUXCOREBOOT1_OFFSET);
/* Save SyncReq generation logic */
val = readl_relaxed(wakeupgen_base + OMAP_PTMSYNCREQ_MASK);
writel_relaxed(val, sar_base + PTMSYNCREQ_MASK_OFFSET);
val = readl_relaxed(wakeupgen_base + OMAP_PTMSYNCREQ_EN);
writel_relaxed(val, sar_base + PTMSYNCREQ_EN_OFFSET);
/* Set the Backup Bit Mask status */
val = readl_relaxed(sar_base + SAR_BACKUP_STATUS_OFFSET);
val |= SAR_BACKUP_STATUS_WAKEUPGEN;
writel_relaxed(val, sar_base + SAR_BACKUP_STATUS_OFFSET);
}
static inline void omap5_irq_save_context(void)
{
u32 i, val;
for (i = 0; i < irq_banks; i++) {
/* Save the CPUx interrupt mask for IRQ 0 to 159 */
val = wakeupgen_readl(i, 0);
sar_writel(val, OMAP5_WAKEUPGENENB_OFFSET_CPU0, i);
val = wakeupgen_readl(i, 1);
sar_writel(val, OMAP5_WAKEUPGENENB_OFFSET_CPU1, i);
sar_writel(0x0, OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU0, i);
sar_writel(0x0, OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU1, i);
}
/* Save AuxBoot* registers */
val = readl_relaxed(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
writel_relaxed(val, sar_base + OMAP5_AUXCOREBOOT0_OFFSET);
val = readl_relaxed(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
writel_relaxed(val, sar_base + OMAP5_AUXCOREBOOT1_OFFSET);
/* Set the Backup Bit Mask status */
val = readl_relaxed(sar_base + OMAP5_SAR_BACKUP_STATUS_OFFSET);
val |= SAR_BACKUP_STATUS_WAKEUPGEN;
writel_relaxed(val, sar_base + OMAP5_SAR_BACKUP_STATUS_OFFSET);
}
/*
* Save WakeupGen interrupt context in SAR BANK3. Restore is done by
* ROM code. WakeupGen IP is integrated along with GIC to manage the
* interrupt wakeups from CPU low power states. It manages
* masking/unmasking of Shared peripheral interrupts(SPI). So the
* interrupt enable/disable control should be in sync and consistent
* at WakeupGen and GIC so that interrupts are not lost.
*/
static void irq_save_context(void)
{
if (!sar_base)
sar_base = omap4_get_sar_ram_base();
if (soc_is_omap54xx())
omap5_irq_save_context();
else
omap4_irq_save_context();
}
/*
* Clear WakeupGen SAR backup status.
*/
ARM: OMAP2+: declare file-local functions as static Several function declarations used only in the files in which they're declared should include the static keyword, but don't: arch/arm/mach-omap2/serial.c:248:6: warning: symbol 'cmdline_find_option' was not declared. Should it be static? arch/arm/mach-omap2/omap-wakeupgen.c:259:6: warning: symbol 'irq_sar_clear' was not declared. Should it be static? arch/arm/mach-omap2/board-rx51-peripherals.c:878:27: warning: symbol 'rx51_vibra_data' was not declared. Should it be static? arch/arm/mach-omap2/board-rx51-peripherals.c:882:27: warning: symbol 'rx51_audio_data' was not declared. Should it be static? arch/arm/mach-omap2/board-omap4panda.c:201:29: warning: symbol 'omap_panda_wlan_data' was not declared. Should it be static? arch/arm/mach-omap2/board-omap4panda.c:393:24: warning: symbol 'omap4_panda_dvi_device' was not declared. Should it be static? arch/arm/mach-omap2/board-omap4panda.c:403:12: warning: symbol 'omap4_panda_dvi_init' was not declared. Should it be static? arch/arm/mach-omap2/board-omap4panda.c:464:6: warning: symbol 'omap4_panda_display_init' was not declared. Should it be static? arch/arm/mach-omap2/hsmmc.c:434:6: warning: symbol 'omap_init_hsmmc' was not declared. Should it be static? arch/arm/mach-omap2/hwspinlock.c:31:12: warning: symbol 'hwspinlocks_init' was not declared. Should it be static? arch/arm/mach-omap1/timer.c:58:12: warning: symbol 'omap1_dm_timer_init' was not declared. Should it be static? arch/arm/mach-omap1/fpga.c:90:6: warning: symbol 'innovator_fpga_IRQ_demux' was not declared. Should it be static? Mark all of these as static. Thanks to Arnd Bergmann <arnd@arndb.de> for pointing out a typo in the original patch description. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Govindraj R <govindraj.raja@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: David Anders <x0132446@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-13 06:34:26 -06:00
static void irq_sar_clear(void)
{
u32 val;
u32 offset = SAR_BACKUP_STATUS_OFFSET;
if (soc_is_omap54xx())
offset = OMAP5_SAR_BACKUP_STATUS_OFFSET;
val = readl_relaxed(sar_base + offset);
val &= ~SAR_BACKUP_STATUS_WAKEUPGEN;
writel_relaxed(val, sar_base + offset);
}
/*
* Save GIC and Wakeupgen interrupt context using secure API
* for HS/EMU devices.
*/
static void irq_save_secure_context(void)
{
u32 ret;
ret = omap_secure_dispatcher(OMAP4_HAL_SAVEGIC_INDEX,
FLAG_START_CRITICAL,
0, 0, 0, 0, 0);
if (ret != API_HAL_RET_VALUE_OK)
pr_err("GIC and Wakeupgen context save failed\n");
}
#endif
#ifdef CONFIG_HOTPLUG_CPU
arm: delete __cpuinit/__CPUINIT usage from all ARM users The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) and are flagged as __cpuinit -- so if we remove the __cpuinit from the arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit related content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. This removes all the ARM uses of the __cpuinit macros from C code, and all __CPUINIT from assembly code. It also had two ".previous" section statements that were paired off against __CPUINIT (aka .section ".cpuinit.text") that also get removed here. [1] https://lkml.org/lkml/2013/5/20/589 Cc: Russell King <linux@arm.linux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-17 13:43:14 -06:00
static int irq_cpu_hotplug_notify(struct notifier_block *self,
unsigned long action, void *hcpu)
{
unsigned int cpu = (unsigned int)hcpu;
switch (action) {
case CPU_ONLINE:
wakeupgen_irqmask_all(cpu, 0);
break;
case CPU_DEAD:
wakeupgen_irqmask_all(cpu, 1);
break;
}
return NOTIFY_OK;
}
static struct notifier_block __refdata irq_hotplug_notifier = {
.notifier_call = irq_cpu_hotplug_notify,
};
static void __init irq_hotplug_init(void)
{
register_hotcpu_notifier(&irq_hotplug_notifier);
}
#else
static void __init irq_hotplug_init(void)
{}
#endif
#ifdef CONFIG_CPU_PM
static int irq_notifier(struct notifier_block *self, unsigned long cmd, void *v)
{
switch (cmd) {
case CPU_CLUSTER_PM_ENTER:
if (omap_type() == OMAP2_DEVICE_TYPE_GP)
irq_save_context();
else
irq_save_secure_context();
break;
case CPU_CLUSTER_PM_EXIT:
if (omap_type() == OMAP2_DEVICE_TYPE_GP)
irq_sar_clear();
break;
}
return NOTIFY_OK;
}
static struct notifier_block irq_notifier_block = {
.notifier_call = irq_notifier,
};
static void __init irq_pm_init(void)
{
/* FIXME: Remove this when MPU OSWR support is added */
if (!IS_PM44XX_ERRATUM(PM_OMAP4_CPU_OSWR_DISABLE))
cpu_pm_register_notifier(&irq_notifier_block);
}
#else
static void __init irq_pm_init(void)
{}
#endif
void __iomem *omap_get_wakeupgen_base(void)
{
return wakeupgen_base;
}
int omap_secure_apis_support(void)
{
return omap_secure_apis;
}
ARM: omap: convert wakeupgen to stacked domains OMAP4/5 has been (ab)using the gic_arch_extn to provide wakeup from suspend, and it makes a lot of sense to convert this code to use stacked domains instead. This patch does just this, updating the DT files to actually reflect what the HW provides. BIG FAT WARNING: because the DTs were so far lying by not exposing the WUGEN HW block, kernels with this patch applied won't have any suspend-resume facility when booted with old DTs, and old kernels with updated DTs won't even boot. On a platform with this patch applied, the system looks like this: root@bacon-fat:~# cat /proc/interrupts CPU0 CPU1 16: 0 0 WUGEN 37 gp_timer 19: 233799 155916 GIC 27 arch_timer 23: 0 0 WUGEN 9 l3-dbg-irq 24: 1 0 WUGEN 10 l3-app-irq 27: 282 0 WUGEN 13 omap-dma-engine 44: 0 0 4ae10000.gpio 13 DMA 294: 0 0 WUGEN 20 gpmc 297: 506 0 WUGEN 56 48070000.i2c 298: 0 0 WUGEN 57 48072000.i2c 299: 0 0 WUGEN 61 48060000.i2c 300: 0 0 WUGEN 62 4807a000.i2c 301: 8 0 WUGEN 60 4807c000.i2c 308: 2439 0 WUGEN 74 OMAP UART2 312: 362 0 WUGEN 83 mmc2 313: 502 0 WUGEN 86 mmc0 314: 13 0 WUGEN 94 mmc1 350: 0 0 PRCM pinctrl, pinctrl 406: 35155709 0 GIC 109 ehci_hcd:usb1 407: 0 0 WUGEN 7 palmas 409: 0 0 WUGEN 119 twl6040 410: 0 0 twl6040 5 twl6040_irq_ready 411: 0 0 twl6040 0 twl6040_irq_th IPI0: 0 1 CPU wakeup interrupts IPI1: 0 0 Timer broadcast interrupts IPI2: 95334 902334 Rescheduling interrupts IPI3: 0 0 Function call interrupts IPI4: 479 648 Single function call interrupts IPI5: 0 0 CPU stop interrupts IPI6: 0 0 IRQ work interrupts IPI7: 0 0 completion interrupts Err: 0 Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1426088629-15377-8-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2015-03-11 09:43:49 -06:00
static struct irq_chip wakeupgen_chip = {
.name = "WUGEN",
.irq_eoi = irq_chip_eoi_parent,
.irq_mask = wakeupgen_mask,
.irq_unmask = wakeupgen_unmask,
.irq_retrigger = irq_chip_retrigger_hierarchy,
.flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_MASK_ON_SUSPEND,
#ifdef CONFIG_SMP
.irq_set_affinity = irq_chip_set_affinity_parent,
#endif
};
static int wakeupgen_domain_xlate(struct irq_domain *domain,
struct device_node *controller,
const u32 *intspec,
unsigned int intsize,
unsigned long *out_hwirq,
unsigned int *out_type)
{
if (domain->of_node != controller)
return -EINVAL; /* Shouldn't happen, really... */
if (intsize != 3)
return -EINVAL; /* Not GIC compliant */
if (intspec[0] != 0)
return -EINVAL; /* No PPI should point to this domain */
*out_hwirq = intspec[1];
*out_type = intspec[2];
return 0;
}
static int wakeupgen_domain_alloc(struct irq_domain *domain,
unsigned int virq,
unsigned int nr_irqs, void *data)
{
struct of_phandle_args *args = data;
struct of_phandle_args parent_args;
irq_hw_number_t hwirq;
int i;
if (args->args_count != 3)
return -EINVAL; /* Not GIC compliant */
if (args->args[0] != 0)
return -EINVAL; /* No PPI should point to this domain */
hwirq = args->args[1];
if (hwirq >= MAX_IRQS)
return -EINVAL; /* Can't deal with this */
for (i = 0; i < nr_irqs; i++)
irq_domain_set_hwirq_and_chip(domain, virq + i, hwirq + i,
&wakeupgen_chip, NULL);
parent_args = *args;
parent_args.np = domain->parent->of_node;
return irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, &parent_args);
}
static struct irq_domain_ops wakeupgen_domain_ops = {
.xlate = wakeupgen_domain_xlate,
.alloc = wakeupgen_domain_alloc,
.free = irq_domain_free_irqs_common,
};
/*
* Initialise the wakeupgen module.
*/
ARM: omap: convert wakeupgen to stacked domains OMAP4/5 has been (ab)using the gic_arch_extn to provide wakeup from suspend, and it makes a lot of sense to convert this code to use stacked domains instead. This patch does just this, updating the DT files to actually reflect what the HW provides. BIG FAT WARNING: because the DTs were so far lying by not exposing the WUGEN HW block, kernels with this patch applied won't have any suspend-resume facility when booted with old DTs, and old kernels with updated DTs won't even boot. On a platform with this patch applied, the system looks like this: root@bacon-fat:~# cat /proc/interrupts CPU0 CPU1 16: 0 0 WUGEN 37 gp_timer 19: 233799 155916 GIC 27 arch_timer 23: 0 0 WUGEN 9 l3-dbg-irq 24: 1 0 WUGEN 10 l3-app-irq 27: 282 0 WUGEN 13 omap-dma-engine 44: 0 0 4ae10000.gpio 13 DMA 294: 0 0 WUGEN 20 gpmc 297: 506 0 WUGEN 56 48070000.i2c 298: 0 0 WUGEN 57 48072000.i2c 299: 0 0 WUGEN 61 48060000.i2c 300: 0 0 WUGEN 62 4807a000.i2c 301: 8 0 WUGEN 60 4807c000.i2c 308: 2439 0 WUGEN 74 OMAP UART2 312: 362 0 WUGEN 83 mmc2 313: 502 0 WUGEN 86 mmc0 314: 13 0 WUGEN 94 mmc1 350: 0 0 PRCM pinctrl, pinctrl 406: 35155709 0 GIC 109 ehci_hcd:usb1 407: 0 0 WUGEN 7 palmas 409: 0 0 WUGEN 119 twl6040 410: 0 0 twl6040 5 twl6040_irq_ready 411: 0 0 twl6040 0 twl6040_irq_th IPI0: 0 1 CPU wakeup interrupts IPI1: 0 0 Timer broadcast interrupts IPI2: 95334 902334 Rescheduling interrupts IPI3: 0 0 Function call interrupts IPI4: 479 648 Single function call interrupts IPI5: 0 0 CPU stop interrupts IPI6: 0 0 IRQ work interrupts IPI7: 0 0 completion interrupts Err: 0 Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1426088629-15377-8-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2015-03-11 09:43:49 -06:00
static int __init wakeupgen_init(struct device_node *node,
struct device_node *parent)
{
ARM: omap: convert wakeupgen to stacked domains OMAP4/5 has been (ab)using the gic_arch_extn to provide wakeup from suspend, and it makes a lot of sense to convert this code to use stacked domains instead. This patch does just this, updating the DT files to actually reflect what the HW provides. BIG FAT WARNING: because the DTs were so far lying by not exposing the WUGEN HW block, kernels with this patch applied won't have any suspend-resume facility when booted with old DTs, and old kernels with updated DTs won't even boot. On a platform with this patch applied, the system looks like this: root@bacon-fat:~# cat /proc/interrupts CPU0 CPU1 16: 0 0 WUGEN 37 gp_timer 19: 233799 155916 GIC 27 arch_timer 23: 0 0 WUGEN 9 l3-dbg-irq 24: 1 0 WUGEN 10 l3-app-irq 27: 282 0 WUGEN 13 omap-dma-engine 44: 0 0 4ae10000.gpio 13 DMA 294: 0 0 WUGEN 20 gpmc 297: 506 0 WUGEN 56 48070000.i2c 298: 0 0 WUGEN 57 48072000.i2c 299: 0 0 WUGEN 61 48060000.i2c 300: 0 0 WUGEN 62 4807a000.i2c 301: 8 0 WUGEN 60 4807c000.i2c 308: 2439 0 WUGEN 74 OMAP UART2 312: 362 0 WUGEN 83 mmc2 313: 502 0 WUGEN 86 mmc0 314: 13 0 WUGEN 94 mmc1 350: 0 0 PRCM pinctrl, pinctrl 406: 35155709 0 GIC 109 ehci_hcd:usb1 407: 0 0 WUGEN 7 palmas 409: 0 0 WUGEN 119 twl6040 410: 0 0 twl6040 5 twl6040_irq_ready 411: 0 0 twl6040 0 twl6040_irq_th IPI0: 0 1 CPU wakeup interrupts IPI1: 0 0 Timer broadcast interrupts IPI2: 95334 902334 Rescheduling interrupts IPI3: 0 0 Function call interrupts IPI4: 479 648 Single function call interrupts IPI5: 0 0 CPU stop interrupts IPI6: 0 0 IRQ work interrupts IPI7: 0 0 completion interrupts Err: 0 Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1426088629-15377-8-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2015-03-11 09:43:49 -06:00
struct irq_domain *parent_domain, *domain;
int i;
unsigned int boot_cpu = smp_processor_id();
u32 val;
ARM: omap: convert wakeupgen to stacked domains OMAP4/5 has been (ab)using the gic_arch_extn to provide wakeup from suspend, and it makes a lot of sense to convert this code to use stacked domains instead. This patch does just this, updating the DT files to actually reflect what the HW provides. BIG FAT WARNING: because the DTs were so far lying by not exposing the WUGEN HW block, kernels with this patch applied won't have any suspend-resume facility when booted with old DTs, and old kernels with updated DTs won't even boot. On a platform with this patch applied, the system looks like this: root@bacon-fat:~# cat /proc/interrupts CPU0 CPU1 16: 0 0 WUGEN 37 gp_timer 19: 233799 155916 GIC 27 arch_timer 23: 0 0 WUGEN 9 l3-dbg-irq 24: 1 0 WUGEN 10 l3-app-irq 27: 282 0 WUGEN 13 omap-dma-engine 44: 0 0 4ae10000.gpio 13 DMA 294: 0 0 WUGEN 20 gpmc 297: 506 0 WUGEN 56 48070000.i2c 298: 0 0 WUGEN 57 48072000.i2c 299: 0 0 WUGEN 61 48060000.i2c 300: 0 0 WUGEN 62 4807a000.i2c 301: 8 0 WUGEN 60 4807c000.i2c 308: 2439 0 WUGEN 74 OMAP UART2 312: 362 0 WUGEN 83 mmc2 313: 502 0 WUGEN 86 mmc0 314: 13 0 WUGEN 94 mmc1 350: 0 0 PRCM pinctrl, pinctrl 406: 35155709 0 GIC 109 ehci_hcd:usb1 407: 0 0 WUGEN 7 palmas 409: 0 0 WUGEN 119 twl6040 410: 0 0 twl6040 5 twl6040_irq_ready 411: 0 0 twl6040 0 twl6040_irq_th IPI0: 0 1 CPU wakeup interrupts IPI1: 0 0 Timer broadcast interrupts IPI2: 95334 902334 Rescheduling interrupts IPI3: 0 0 Function call interrupts IPI4: 479 648 Single function call interrupts IPI5: 0 0 CPU stop interrupts IPI6: 0 0 IRQ work interrupts IPI7: 0 0 completion interrupts Err: 0 Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1426088629-15377-8-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2015-03-11 09:43:49 -06:00
if (!parent) {
pr_err("%s: no parent, giving up\n", node->full_name);
return -ENODEV;
}
parent_domain = irq_find_host(parent);
if (!parent_domain) {
pr_err("%s: unable to obtain parent domain\n", node->full_name);
return -ENXIO;
}
/* Not supported on OMAP4 ES1.0 silicon */
if (omap_rev() == OMAP4430_REV_ES1_0) {
WARN(1, "WakeupGen: Not supported on OMAP4430 ES1.0\n");
return -EPERM;
}
/* Static mapping, never released */
ARM: omap: convert wakeupgen to stacked domains OMAP4/5 has been (ab)using the gic_arch_extn to provide wakeup from suspend, and it makes a lot of sense to convert this code to use stacked domains instead. This patch does just this, updating the DT files to actually reflect what the HW provides. BIG FAT WARNING: because the DTs were so far lying by not exposing the WUGEN HW block, kernels with this patch applied won't have any suspend-resume facility when booted with old DTs, and old kernels with updated DTs won't even boot. On a platform with this patch applied, the system looks like this: root@bacon-fat:~# cat /proc/interrupts CPU0 CPU1 16: 0 0 WUGEN 37 gp_timer 19: 233799 155916 GIC 27 arch_timer 23: 0 0 WUGEN 9 l3-dbg-irq 24: 1 0 WUGEN 10 l3-app-irq 27: 282 0 WUGEN 13 omap-dma-engine 44: 0 0 4ae10000.gpio 13 DMA 294: 0 0 WUGEN 20 gpmc 297: 506 0 WUGEN 56 48070000.i2c 298: 0 0 WUGEN 57 48072000.i2c 299: 0 0 WUGEN 61 48060000.i2c 300: 0 0 WUGEN 62 4807a000.i2c 301: 8 0 WUGEN 60 4807c000.i2c 308: 2439 0 WUGEN 74 OMAP UART2 312: 362 0 WUGEN 83 mmc2 313: 502 0 WUGEN 86 mmc0 314: 13 0 WUGEN 94 mmc1 350: 0 0 PRCM pinctrl, pinctrl 406: 35155709 0 GIC 109 ehci_hcd:usb1 407: 0 0 WUGEN 7 palmas 409: 0 0 WUGEN 119 twl6040 410: 0 0 twl6040 5 twl6040_irq_ready 411: 0 0 twl6040 0 twl6040_irq_th IPI0: 0 1 CPU wakeup interrupts IPI1: 0 0 Timer broadcast interrupts IPI2: 95334 902334 Rescheduling interrupts IPI3: 0 0 Function call interrupts IPI4: 479 648 Single function call interrupts IPI5: 0 0 CPU stop interrupts IPI6: 0 0 IRQ work interrupts IPI7: 0 0 completion interrupts Err: 0 Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1426088629-15377-8-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2015-03-11 09:43:49 -06:00
wakeupgen_base = of_iomap(node, 0);
if (WARN_ON(!wakeupgen_base))
return -ENOMEM;
if (cpu_is_omap44xx()) {
irq_banks = OMAP4_NR_BANKS;
max_irqs = OMAP4_NR_IRQS;
omap_secure_apis = 1;
} else if (soc_is_am43xx()) {
irq_banks = AM43XX_NR_REG_BANKS;
max_irqs = AM43XX_IRQS;
}
ARM: omap: convert wakeupgen to stacked domains OMAP4/5 has been (ab)using the gic_arch_extn to provide wakeup from suspend, and it makes a lot of sense to convert this code to use stacked domains instead. This patch does just this, updating the DT files to actually reflect what the HW provides. BIG FAT WARNING: because the DTs were so far lying by not exposing the WUGEN HW block, kernels with this patch applied won't have any suspend-resume facility when booted with old DTs, and old kernels with updated DTs won't even boot. On a platform with this patch applied, the system looks like this: root@bacon-fat:~# cat /proc/interrupts CPU0 CPU1 16: 0 0 WUGEN 37 gp_timer 19: 233799 155916 GIC 27 arch_timer 23: 0 0 WUGEN 9 l3-dbg-irq 24: 1 0 WUGEN 10 l3-app-irq 27: 282 0 WUGEN 13 omap-dma-engine 44: 0 0 4ae10000.gpio 13 DMA 294: 0 0 WUGEN 20 gpmc 297: 506 0 WUGEN 56 48070000.i2c 298: 0 0 WUGEN 57 48072000.i2c 299: 0 0 WUGEN 61 48060000.i2c 300: 0 0 WUGEN 62 4807a000.i2c 301: 8 0 WUGEN 60 4807c000.i2c 308: 2439 0 WUGEN 74 OMAP UART2 312: 362 0 WUGEN 83 mmc2 313: 502 0 WUGEN 86 mmc0 314: 13 0 WUGEN 94 mmc1 350: 0 0 PRCM pinctrl, pinctrl 406: 35155709 0 GIC 109 ehci_hcd:usb1 407: 0 0 WUGEN 7 palmas 409: 0 0 WUGEN 119 twl6040 410: 0 0 twl6040 5 twl6040_irq_ready 411: 0 0 twl6040 0 twl6040_irq_th IPI0: 0 1 CPU wakeup interrupts IPI1: 0 0 Timer broadcast interrupts IPI2: 95334 902334 Rescheduling interrupts IPI3: 0 0 Function call interrupts IPI4: 479 648 Single function call interrupts IPI5: 0 0 CPU stop interrupts IPI6: 0 0 IRQ work interrupts IPI7: 0 0 completion interrupts Err: 0 Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1426088629-15377-8-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2015-03-11 09:43:49 -06:00
domain = irq_domain_add_hierarchy(parent_domain, 0, max_irqs,
node, &wakeupgen_domain_ops,
NULL);
if (!domain) {
iounmap(wakeupgen_base);
return -ENOMEM;
}
/* Clear all IRQ bitmasks at wakeupGen level */
for (i = 0; i < irq_banks; i++) {
wakeupgen_writel(0, i, CPU0_ID);
if (!soc_is_am43xx())
wakeupgen_writel(0, i, CPU1_ID);
}
/*
* FIXME: Add support to set_smp_affinity() once the core
* GIC code has necessary hooks in place.
*/
/* Associate all the IRQs to boot CPU like GIC init does. */
for (i = 0; i < max_irqs; i++)
irq_target_cpu[i] = boot_cpu;
/*
* Enables OMAP5 ES2 PM Mode using ES2_PM_MODE in AMBA_IF_MODE
* 0x0: ES1 behavior, CPU cores would enter and exit OFF mode together.
* 0x1: ES2 behavior, CPU cores are allowed to enter/exit OFF mode
* independently.
* This needs to be set one time thanks to always ON domain.
*
* We do not support ES1 behavior anymore. OMAP5 is assumed to be
* ES2.0, and the same is applicable for DRA7.
*/
if (soc_is_omap54xx() || soc_is_dra7xx()) {
val = __raw_readl(wakeupgen_base + OMAP_AMBA_IF_MODE);
val |= BIT(5);
omap_smc1(OMAP5_MON_AMBA_IF_INDEX, val);
}
irq_hotplug_init();
irq_pm_init();
return 0;
}
ARM: omap: convert wakeupgen to stacked domains OMAP4/5 has been (ab)using the gic_arch_extn to provide wakeup from suspend, and it makes a lot of sense to convert this code to use stacked domains instead. This patch does just this, updating the DT files to actually reflect what the HW provides. BIG FAT WARNING: because the DTs were so far lying by not exposing the WUGEN HW block, kernels with this patch applied won't have any suspend-resume facility when booted with old DTs, and old kernels with updated DTs won't even boot. On a platform with this patch applied, the system looks like this: root@bacon-fat:~# cat /proc/interrupts CPU0 CPU1 16: 0 0 WUGEN 37 gp_timer 19: 233799 155916 GIC 27 arch_timer 23: 0 0 WUGEN 9 l3-dbg-irq 24: 1 0 WUGEN 10 l3-app-irq 27: 282 0 WUGEN 13 omap-dma-engine 44: 0 0 4ae10000.gpio 13 DMA 294: 0 0 WUGEN 20 gpmc 297: 506 0 WUGEN 56 48070000.i2c 298: 0 0 WUGEN 57 48072000.i2c 299: 0 0 WUGEN 61 48060000.i2c 300: 0 0 WUGEN 62 4807a000.i2c 301: 8 0 WUGEN 60 4807c000.i2c 308: 2439 0 WUGEN 74 OMAP UART2 312: 362 0 WUGEN 83 mmc2 313: 502 0 WUGEN 86 mmc0 314: 13 0 WUGEN 94 mmc1 350: 0 0 PRCM pinctrl, pinctrl 406: 35155709 0 GIC 109 ehci_hcd:usb1 407: 0 0 WUGEN 7 palmas 409: 0 0 WUGEN 119 twl6040 410: 0 0 twl6040 5 twl6040_irq_ready 411: 0 0 twl6040 0 twl6040_irq_th IPI0: 0 1 CPU wakeup interrupts IPI1: 0 0 Timer broadcast interrupts IPI2: 95334 902334 Rescheduling interrupts IPI3: 0 0 Function call interrupts IPI4: 479 648 Single function call interrupts IPI5: 0 0 CPU stop interrupts IPI6: 0 0 IRQ work interrupts IPI7: 0 0 completion interrupts Err: 0 Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1426088629-15377-8-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2015-03-11 09:43:49 -06:00
/*
* We cannot use the IRQCHIP_DECLARE macro that lives in
* drivers/irqchip, so we're forced to roll our own. Not very nice.
*/
OF_DECLARE_2(irqchip, ti_wakeupgen, "ti,omap4-wugen-mpu", wakeupgen_init);