1
0
Fork 0
alistair23-linux/sound/soc/sh/rcar/dma.c

742 lines
18 KiB
C
Raw Normal View History

/*
* Renesas R-Car Audio DMAC support
*
* Copyright (C) 2015 Renesas Electronics Corp.
* Copyright (c) 2015 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/delay.h>
ASoC: rsnd: 1st DMAC dma-names cares subnode Renesas R-Car sound (= rsnd) needs 2 DMAC which are called as Audio DMAC (= 1st DMAC) and Audio DMAC peri peri (2nd DMAC). And rsnd had assumed that 1st / 2nd DMACs are implemented as DMAEngine. But, in result of DMA ML discussion, 2nd DMAC was concluded that it is not a general purpose DMAC (2nd DMAC is for Device to Device inside sound system). Additionally, current DMAEngine can't support Device to Device, and we don't have correct DT bindings for it at this point. So the easiest solution for it is that move it from DMAEngine to rsnd driver. dma-names on DT was implemented as no difference between 1st / 2nd DMAC's, since rsnd had assumed that both DMACs are implemented as DMAEngine. That style was "src_dst". But now, 2nd DMAC was implemented as non DMAEngine, and it doesn't need dma-names anymore. So, this dma-names rule is no longer needed. And additionally, dma-names was assumed that it has all (= SSI/SSIU/SRC/DVC) nodes under sound node. In upstream code, no SoC/platform is supporting DMA for rsnd driver yet. This means there is no compatible issue if this patch changes dma-names's rule of DT. This patch assumes dma-names for 1st DMAC are tx/rx base, and listed in each SSI/SRC/DVC subnode ex) rcar_sound,dvc { dvc0: dvc@0 { dmas = <&audma0 0xbc>; dma-names = "tx"; }; ... rcar_sound,src { src0: src@0 { ... dmas = <&audma0 0x85>, <&audma1 0x9a>; dma-names = "rx", "tx"; }; ... rcar_sound,ssi { ssi0: ssi@0 { ... dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; dma-names = "rx", "tx", "rxu", "txu"; }; ... Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-20 03:31:23 -07:00
#include <linux/of_dma.h>
#include "rsnd.h"
/*
* Audio DMAC peri peri register
*/
#define PDMASAR 0x00
#define PDMADAR 0x04
#define PDMACHCR 0x0c
/* PDMACHCR */
#define PDMACHCR_DE (1 << 0)
struct rsnd_dmaen {
struct dma_chan *chan;
};
struct rsnd_dmapp {
int dmapp_id;
u32 chcr;
};
struct rsnd_dma {
struct rsnd_mod mod;
dma_addr_t src_addr;
dma_addr_t dst_addr;
union {
struct rsnd_dmaen en;
struct rsnd_dmapp pp;
} dma;
};
struct rsnd_dma_ctrl {
void __iomem *base;
int dmaen_num;
int dmapp_num;
};
#define rsnd_priv_to_dmac(p) ((struct rsnd_dma_ctrl *)(p)->dma)
#define rsnd_mod_to_dma(_mod) container_of((_mod), struct rsnd_dma, mod)
#define rsnd_dma_to_dmaen(dma) (&(dma)->dma.en)
#define rsnd_dma_to_dmapp(dma) (&(dma)->dma.pp)
/*
* Audio DMAC
*/
static void __rsnd_dmaen_complete(struct rsnd_mod *mod,
struct rsnd_dai_stream *io)
{
struct rsnd_priv *priv = rsnd_mod_to_priv(mod);
bool elapsed = false;
unsigned long flags;
/*
* Renesas sound Gen1 needs 1 DMAC,
* Gen2 needs 2 DMAC.
* In Gen2 case, it are Audio-DMAC, and Audio-DMAC-peri-peri.
* But, Audio-DMAC-peri-peri doesn't have interrupt,
* and this driver is assuming that here.
*
* If Audio-DMAC-peri-peri has interrpt,
* rsnd_dai_pointer_update() will be called twice,
* ant it will breaks io->byte_pos
*/
spin_lock_irqsave(&priv->lock, flags);
if (rsnd_io_is_working(io))
elapsed = rsnd_dai_pointer_update(io, io->byte_per_period);
spin_unlock_irqrestore(&priv->lock, flags);
if (elapsed)
rsnd_dai_period_elapsed(io);
}
static void rsnd_dmaen_complete(void *data)
{
struct rsnd_mod *mod = data;
rsnd_mod_interrupt(mod, __rsnd_dmaen_complete);
}
static int rsnd_dmaen_stop(struct rsnd_mod *mod,
struct rsnd_dai_stream *io,
struct rsnd_priv *priv)
{
struct rsnd_dma *dma = rsnd_mod_to_dma(mod);
struct rsnd_dmaen *dmaen = rsnd_dma_to_dmaen(dma);
dmaengine_terminate_all(dmaen->chan);
return 0;
}
static int rsnd_dmaen_start(struct rsnd_mod *mod,
struct rsnd_dai_stream *io,
struct rsnd_priv *priv)
{
struct rsnd_dma *dma = rsnd_mod_to_dma(mod);
struct rsnd_dmaen *dmaen = rsnd_dma_to_dmaen(dma);
struct snd_pcm_substream *substream = io->substream;
struct device *dev = rsnd_priv_to_dev(priv);
struct dma_async_tx_descriptor *desc;
int is_play = rsnd_io_is_play(io);
desc = dmaengine_prep_dma_cyclic(dmaen->chan,
substream->runtime->dma_addr,
snd_pcm_lib_buffer_bytes(substream),
snd_pcm_lib_period_bytes(substream),
is_play ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (!desc) {
dev_err(dev, "dmaengine_prep_slave_sg() fail\n");
return -EIO;
}
desc->callback = rsnd_dmaen_complete;
desc->callback_param = rsnd_mod_get(dma);
if (dmaengine_submit(desc) < 0) {
dev_err(dev, "dmaengine_submit() fail\n");
return -EIO;
}
dma_async_issue_pending(dmaen->chan);
return 0;
}
ASoC: rsnd: 1st DMAC dma-names cares subnode Renesas R-Car sound (= rsnd) needs 2 DMAC which are called as Audio DMAC (= 1st DMAC) and Audio DMAC peri peri (2nd DMAC). And rsnd had assumed that 1st / 2nd DMACs are implemented as DMAEngine. But, in result of DMA ML discussion, 2nd DMAC was concluded that it is not a general purpose DMAC (2nd DMAC is for Device to Device inside sound system). Additionally, current DMAEngine can't support Device to Device, and we don't have correct DT bindings for it at this point. So the easiest solution for it is that move it from DMAEngine to rsnd driver. dma-names on DT was implemented as no difference between 1st / 2nd DMAC's, since rsnd had assumed that both DMACs are implemented as DMAEngine. That style was "src_dst". But now, 2nd DMAC was implemented as non DMAEngine, and it doesn't need dma-names anymore. So, this dma-names rule is no longer needed. And additionally, dma-names was assumed that it has all (= SSI/SSIU/SRC/DVC) nodes under sound node. In upstream code, no SoC/platform is supporting DMA for rsnd driver yet. This means there is no compatible issue if this patch changes dma-names's rule of DT. This patch assumes dma-names for 1st DMAC are tx/rx base, and listed in each SSI/SRC/DVC subnode ex) rcar_sound,dvc { dvc0: dvc@0 { dmas = <&audma0 0xbc>; dma-names = "tx"; }; ... rcar_sound,src { src0: src@0 { ... dmas = <&audma0 0x85>, <&audma1 0x9a>; dma-names = "rx", "tx"; }; ... rcar_sound,ssi { ssi0: ssi@0 { ... dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; dma-names = "rx", "tx", "rxu", "txu"; }; ... Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-20 03:31:23 -07:00
struct dma_chan *rsnd_dma_request_channel(struct device_node *of_node,
struct rsnd_mod *mod, char *name)
{
struct dma_chan *chan;
struct device_node *np;
int i = 0;
for_each_child_of_node(of_node, np) {
if (i == rsnd_mod_id(mod))
break;
i++;
}
chan = of_dma_request_slave_channel(np, name);
of_node_put(np);
of_node_put(of_node);
return chan;
}
static struct dma_chan *rsnd_dmaen_request_channel(struct rsnd_dai_stream *io,
struct rsnd_mod *mod_from,
ASoC: rsnd: 1st DMAC dma-names cares subnode Renesas R-Car sound (= rsnd) needs 2 DMAC which are called as Audio DMAC (= 1st DMAC) and Audio DMAC peri peri (2nd DMAC). And rsnd had assumed that 1st / 2nd DMACs are implemented as DMAEngine. But, in result of DMA ML discussion, 2nd DMAC was concluded that it is not a general purpose DMAC (2nd DMAC is for Device to Device inside sound system). Additionally, current DMAEngine can't support Device to Device, and we don't have correct DT bindings for it at this point. So the easiest solution for it is that move it from DMAEngine to rsnd driver. dma-names on DT was implemented as no difference between 1st / 2nd DMAC's, since rsnd had assumed that both DMACs are implemented as DMAEngine. That style was "src_dst". But now, 2nd DMAC was implemented as non DMAEngine, and it doesn't need dma-names anymore. So, this dma-names rule is no longer needed. And additionally, dma-names was assumed that it has all (= SSI/SSIU/SRC/DVC) nodes under sound node. In upstream code, no SoC/platform is supporting DMA for rsnd driver yet. This means there is no compatible issue if this patch changes dma-names's rule of DT. This patch assumes dma-names for 1st DMAC are tx/rx base, and listed in each SSI/SRC/DVC subnode ex) rcar_sound,dvc { dvc0: dvc@0 { dmas = <&audma0 0xbc>; dma-names = "tx"; }; ... rcar_sound,src { src0: src@0 { ... dmas = <&audma0 0x85>, <&audma1 0x9a>; dma-names = "rx", "tx"; }; ... rcar_sound,ssi { ssi0: ssi@0 { ... dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; dma-names = "rx", "tx", "rxu", "txu"; }; ... Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-20 03:31:23 -07:00
struct rsnd_mod *mod_to)
{
if ((!mod_from && !mod_to) ||
(mod_from && mod_to))
return NULL;
if (mod_from)
return rsnd_mod_dma_req(io, mod_from);
ASoC: rsnd: 1st DMAC dma-names cares subnode Renesas R-Car sound (= rsnd) needs 2 DMAC which are called as Audio DMAC (= 1st DMAC) and Audio DMAC peri peri (2nd DMAC). And rsnd had assumed that 1st / 2nd DMACs are implemented as DMAEngine. But, in result of DMA ML discussion, 2nd DMAC was concluded that it is not a general purpose DMAC (2nd DMAC is for Device to Device inside sound system). Additionally, current DMAEngine can't support Device to Device, and we don't have correct DT bindings for it at this point. So the easiest solution for it is that move it from DMAEngine to rsnd driver. dma-names on DT was implemented as no difference between 1st / 2nd DMAC's, since rsnd had assumed that both DMACs are implemented as DMAEngine. That style was "src_dst". But now, 2nd DMAC was implemented as non DMAEngine, and it doesn't need dma-names anymore. So, this dma-names rule is no longer needed. And additionally, dma-names was assumed that it has all (= SSI/SSIU/SRC/DVC) nodes under sound node. In upstream code, no SoC/platform is supporting DMA for rsnd driver yet. This means there is no compatible issue if this patch changes dma-names's rule of DT. This patch assumes dma-names for 1st DMAC are tx/rx base, and listed in each SSI/SRC/DVC subnode ex) rcar_sound,dvc { dvc0: dvc@0 { dmas = <&audma0 0xbc>; dma-names = "tx"; }; ... rcar_sound,src { src0: src@0 { ... dmas = <&audma0 0x85>, <&audma1 0x9a>; dma-names = "rx", "tx"; }; ... rcar_sound,ssi { ssi0: ssi@0 { ... dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; dma-names = "rx", "tx", "rxu", "txu"; }; ... Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-20 03:31:23 -07:00
else
return rsnd_mod_dma_req(io, mod_to);
ASoC: rsnd: 1st DMAC dma-names cares subnode Renesas R-Car sound (= rsnd) needs 2 DMAC which are called as Audio DMAC (= 1st DMAC) and Audio DMAC peri peri (2nd DMAC). And rsnd had assumed that 1st / 2nd DMACs are implemented as DMAEngine. But, in result of DMA ML discussion, 2nd DMAC was concluded that it is not a general purpose DMAC (2nd DMAC is for Device to Device inside sound system). Additionally, current DMAEngine can't support Device to Device, and we don't have correct DT bindings for it at this point. So the easiest solution for it is that move it from DMAEngine to rsnd driver. dma-names on DT was implemented as no difference between 1st / 2nd DMAC's, since rsnd had assumed that both DMACs are implemented as DMAEngine. That style was "src_dst". But now, 2nd DMAC was implemented as non DMAEngine, and it doesn't need dma-names anymore. So, this dma-names rule is no longer needed. And additionally, dma-names was assumed that it has all (= SSI/SSIU/SRC/DVC) nodes under sound node. In upstream code, no SoC/platform is supporting DMA for rsnd driver yet. This means there is no compatible issue if this patch changes dma-names's rule of DT. This patch assumes dma-names for 1st DMAC are tx/rx base, and listed in each SSI/SRC/DVC subnode ex) rcar_sound,dvc { dvc0: dvc@0 { dmas = <&audma0 0xbc>; dma-names = "tx"; }; ... rcar_sound,src { src0: src@0 { ... dmas = <&audma0 0x85>, <&audma1 0x9a>; dma-names = "rx", "tx"; }; ... rcar_sound,ssi { ssi0: ssi@0 { ... dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; dma-names = "rx", "tx", "rxu", "txu"; }; ... Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-20 03:31:23 -07:00
}
static int rsnd_dmaen_remove(struct rsnd_mod *mod,
struct rsnd_dai_stream *io,
struct rsnd_priv *priv)
{
struct rsnd_dma *dma = rsnd_mod_to_dma(mod);
struct rsnd_dmaen *dmaen = rsnd_dma_to_dmaen(dma);
if (dmaen->chan)
dma_release_channel(dmaen->chan);
dmaen->chan = NULL;
return 0;
}
static int rsnd_dmaen_attach(struct rsnd_dai_stream *io,
struct rsnd_dma *dma, int id,
struct rsnd_mod *mod_from, struct rsnd_mod *mod_to)
{
struct rsnd_mod *mod = rsnd_mod_get(dma);
struct rsnd_dmaen *dmaen = rsnd_dma_to_dmaen(dma);
struct rsnd_priv *priv = rsnd_io_to_priv(io);
struct rsnd_dma_ctrl *dmac = rsnd_priv_to_dmac(priv);
struct device *dev = rsnd_priv_to_dev(priv);
struct dma_slave_config cfg = {};
int is_play = rsnd_io_is_play(io);
int ret;
if (dmaen->chan) {
dev_err(dev, "it already has dma channel\n");
return -EIO;
}
ASoC: rsnd: 1st DMAC dma-names cares subnode Renesas R-Car sound (= rsnd) needs 2 DMAC which are called as Audio DMAC (= 1st DMAC) and Audio DMAC peri peri (2nd DMAC). And rsnd had assumed that 1st / 2nd DMACs are implemented as DMAEngine. But, in result of DMA ML discussion, 2nd DMAC was concluded that it is not a general purpose DMAC (2nd DMAC is for Device to Device inside sound system). Additionally, current DMAEngine can't support Device to Device, and we don't have correct DT bindings for it at this point. So the easiest solution for it is that move it from DMAEngine to rsnd driver. dma-names on DT was implemented as no difference between 1st / 2nd DMAC's, since rsnd had assumed that both DMACs are implemented as DMAEngine. That style was "src_dst". But now, 2nd DMAC was implemented as non DMAEngine, and it doesn't need dma-names anymore. So, this dma-names rule is no longer needed. And additionally, dma-names was assumed that it has all (= SSI/SSIU/SRC/DVC) nodes under sound node. In upstream code, no SoC/platform is supporting DMA for rsnd driver yet. This means there is no compatible issue if this patch changes dma-names's rule of DT. This patch assumes dma-names for 1st DMAC are tx/rx base, and listed in each SSI/SRC/DVC subnode ex) rcar_sound,dvc { dvc0: dvc@0 { dmas = <&audma0 0xbc>; dma-names = "tx"; }; ... rcar_sound,src { src0: src@0 { ... dmas = <&audma0 0x85>, <&audma1 0x9a>; dma-names = "rx", "tx"; }; ... rcar_sound,ssi { ssi0: ssi@0 { ... dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; dma-names = "rx", "tx", "rxu", "txu"; }; ... Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-20 03:31:23 -07:00
if (dev->of_node) {
dmaen->chan = rsnd_dmaen_request_channel(io, mod_from, mod_to);
ASoC: rsnd: 1st DMAC dma-names cares subnode Renesas R-Car sound (= rsnd) needs 2 DMAC which are called as Audio DMAC (= 1st DMAC) and Audio DMAC peri peri (2nd DMAC). And rsnd had assumed that 1st / 2nd DMACs are implemented as DMAEngine. But, in result of DMA ML discussion, 2nd DMAC was concluded that it is not a general purpose DMAC (2nd DMAC is for Device to Device inside sound system). Additionally, current DMAEngine can't support Device to Device, and we don't have correct DT bindings for it at this point. So the easiest solution for it is that move it from DMAEngine to rsnd driver. dma-names on DT was implemented as no difference between 1st / 2nd DMAC's, since rsnd had assumed that both DMACs are implemented as DMAEngine. That style was "src_dst". But now, 2nd DMAC was implemented as non DMAEngine, and it doesn't need dma-names anymore. So, this dma-names rule is no longer needed. And additionally, dma-names was assumed that it has all (= SSI/SSIU/SRC/DVC) nodes under sound node. In upstream code, no SoC/platform is supporting DMA for rsnd driver yet. This means there is no compatible issue if this patch changes dma-names's rule of DT. This patch assumes dma-names for 1st DMAC are tx/rx base, and listed in each SSI/SRC/DVC subnode ex) rcar_sound,dvc { dvc0: dvc@0 { dmas = <&audma0 0xbc>; dma-names = "tx"; }; ... rcar_sound,src { src0: src@0 { ... dmas = <&audma0 0x85>, <&audma1 0x9a>; dma-names = "rx", "tx"; }; ... rcar_sound,ssi { ssi0: ssi@0 { ... dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; dma-names = "rx", "tx", "rxu", "txu"; }; ... Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-20 03:31:23 -07:00
} else {
dma_cap_mask_t mask;
ASoC: rsnd: 1st DMAC dma-names cares subnode Renesas R-Car sound (= rsnd) needs 2 DMAC which are called as Audio DMAC (= 1st DMAC) and Audio DMAC peri peri (2nd DMAC). And rsnd had assumed that 1st / 2nd DMACs are implemented as DMAEngine. But, in result of DMA ML discussion, 2nd DMAC was concluded that it is not a general purpose DMAC (2nd DMAC is for Device to Device inside sound system). Additionally, current DMAEngine can't support Device to Device, and we don't have correct DT bindings for it at this point. So the easiest solution for it is that move it from DMAEngine to rsnd driver. dma-names on DT was implemented as no difference between 1st / 2nd DMAC's, since rsnd had assumed that both DMACs are implemented as DMAEngine. That style was "src_dst". But now, 2nd DMAC was implemented as non DMAEngine, and it doesn't need dma-names anymore. So, this dma-names rule is no longer needed. And additionally, dma-names was assumed that it has all (= SSI/SSIU/SRC/DVC) nodes under sound node. In upstream code, no SoC/platform is supporting DMA for rsnd driver yet. This means there is no compatible issue if this patch changes dma-names's rule of DT. This patch assumes dma-names for 1st DMAC are tx/rx base, and listed in each SSI/SRC/DVC subnode ex) rcar_sound,dvc { dvc0: dvc@0 { dmas = <&audma0 0xbc>; dma-names = "tx"; }; ... rcar_sound,src { src0: src@0 { ... dmas = <&audma0 0x85>, <&audma1 0x9a>; dma-names = "rx", "tx"; }; ... rcar_sound,ssi { ssi0: ssi@0 { ... dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; dma-names = "rx", "tx", "rxu", "txu"; }; ... Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-20 03:31:23 -07:00
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
dmaen->chan = dma_request_channel(mask, shdma_chan_filter,
(void *)(uintptr_t)id);
ASoC: rsnd: 1st DMAC dma-names cares subnode Renesas R-Car sound (= rsnd) needs 2 DMAC which are called as Audio DMAC (= 1st DMAC) and Audio DMAC peri peri (2nd DMAC). And rsnd had assumed that 1st / 2nd DMACs are implemented as DMAEngine. But, in result of DMA ML discussion, 2nd DMAC was concluded that it is not a general purpose DMAC (2nd DMAC is for Device to Device inside sound system). Additionally, current DMAEngine can't support Device to Device, and we don't have correct DT bindings for it at this point. So the easiest solution for it is that move it from DMAEngine to rsnd driver. dma-names on DT was implemented as no difference between 1st / 2nd DMAC's, since rsnd had assumed that both DMACs are implemented as DMAEngine. That style was "src_dst". But now, 2nd DMAC was implemented as non DMAEngine, and it doesn't need dma-names anymore. So, this dma-names rule is no longer needed. And additionally, dma-names was assumed that it has all (= SSI/SSIU/SRC/DVC) nodes under sound node. In upstream code, no SoC/platform is supporting DMA for rsnd driver yet. This means there is no compatible issue if this patch changes dma-names's rule of DT. This patch assumes dma-names for 1st DMAC are tx/rx base, and listed in each SSI/SRC/DVC subnode ex) rcar_sound,dvc { dvc0: dvc@0 { dmas = <&audma0 0xbc>; dma-names = "tx"; }; ... rcar_sound,src { src0: src@0 { ... dmas = <&audma0 0x85>, <&audma1 0x9a>; dma-names = "rx", "tx"; }; ... rcar_sound,ssi { ssi0: ssi@0 { ... dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; dma-names = "rx", "tx", "rxu", "txu"; }; ... Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-20 03:31:23 -07:00
}
if (IS_ERR_OR_NULL(dmaen->chan)) {
dmaen->chan = NULL;
ASoC: rsnd: 1st DMAC dma-names cares subnode Renesas R-Car sound (= rsnd) needs 2 DMAC which are called as Audio DMAC (= 1st DMAC) and Audio DMAC peri peri (2nd DMAC). And rsnd had assumed that 1st / 2nd DMACs are implemented as DMAEngine. But, in result of DMA ML discussion, 2nd DMAC was concluded that it is not a general purpose DMAC (2nd DMAC is for Device to Device inside sound system). Additionally, current DMAEngine can't support Device to Device, and we don't have correct DT bindings for it at this point. So the easiest solution for it is that move it from DMAEngine to rsnd driver. dma-names on DT was implemented as no difference between 1st / 2nd DMAC's, since rsnd had assumed that both DMACs are implemented as DMAEngine. That style was "src_dst". But now, 2nd DMAC was implemented as non DMAEngine, and it doesn't need dma-names anymore. So, this dma-names rule is no longer needed. And additionally, dma-names was assumed that it has all (= SSI/SSIU/SRC/DVC) nodes under sound node. In upstream code, no SoC/platform is supporting DMA for rsnd driver yet. This means there is no compatible issue if this patch changes dma-names's rule of DT. This patch assumes dma-names for 1st DMAC are tx/rx base, and listed in each SSI/SRC/DVC subnode ex) rcar_sound,dvc { dvc0: dvc@0 { dmas = <&audma0 0xbc>; dma-names = "tx"; }; ... rcar_sound,src { src0: src@0 { ... dmas = <&audma0 0x85>, <&audma1 0x9a>; dma-names = "rx", "tx"; }; ... rcar_sound,ssi { ssi0: ssi@0 { ... dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; dma-names = "rx", "tx", "rxu", "txu"; }; ... Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-20 03:31:23 -07:00
dev_err(dev, "can't get dma channel\n");
goto rsnd_dma_channel_err;
}
cfg.direction = is_play ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM;
cfg.src_addr = dma->src_addr;
cfg.dst_addr = dma->dst_addr;
cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
dev_dbg(dev, "%s[%d] %pad -> %pad\n",
rsnd_mod_name(mod), rsnd_mod_id(mod),
ASoC: rsnd: 1st DMAC dma-names cares subnode Renesas R-Car sound (= rsnd) needs 2 DMAC which are called as Audio DMAC (= 1st DMAC) and Audio DMAC peri peri (2nd DMAC). And rsnd had assumed that 1st / 2nd DMACs are implemented as DMAEngine. But, in result of DMA ML discussion, 2nd DMAC was concluded that it is not a general purpose DMAC (2nd DMAC is for Device to Device inside sound system). Additionally, current DMAEngine can't support Device to Device, and we don't have correct DT bindings for it at this point. So the easiest solution for it is that move it from DMAEngine to rsnd driver. dma-names on DT was implemented as no difference between 1st / 2nd DMAC's, since rsnd had assumed that both DMACs are implemented as DMAEngine. That style was "src_dst". But now, 2nd DMAC was implemented as non DMAEngine, and it doesn't need dma-names anymore. So, this dma-names rule is no longer needed. And additionally, dma-names was assumed that it has all (= SSI/SSIU/SRC/DVC) nodes under sound node. In upstream code, no SoC/platform is supporting DMA for rsnd driver yet. This means there is no compatible issue if this patch changes dma-names's rule of DT. This patch assumes dma-names for 1st DMAC are tx/rx base, and listed in each SSI/SRC/DVC subnode ex) rcar_sound,dvc { dvc0: dvc@0 { dmas = <&audma0 0xbc>; dma-names = "tx"; }; ... rcar_sound,src { src0: src@0 { ... dmas = <&audma0 0x85>, <&audma1 0x9a>; dma-names = "rx", "tx"; }; ... rcar_sound,ssi { ssi0: ssi@0 { ... dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; dma-names = "rx", "tx", "rxu", "txu"; }; ... Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-20 03:31:23 -07:00
&cfg.src_addr, &cfg.dst_addr);
ret = dmaengine_slave_config(dmaen->chan, &cfg);
if (ret < 0)
goto rsnd_dma_attach_err;
dmac->dmaen_num++;
return 0;
rsnd_dma_attach_err:
rsnd_dmaen_remove(mod, io, priv);
rsnd_dma_channel_err:
/*
* DMA failed. try to PIO mode
* see
* rsnd_ssi_fallback()
* rsnd_rdai_continuance_probe()
*/
return -EAGAIN;
}
static struct rsnd_mod_ops rsnd_dmaen_ops = {
.name = "audmac",
.start = rsnd_dmaen_start,
.stop = rsnd_dmaen_stop,
.remove = rsnd_dmaen_remove,
};
/*
* Audio DMAC peri peri
*/
static const u8 gen2_id_table_ssiu[] = {
0x00, /* SSI00 */
0x04, /* SSI10 */
0x08, /* SSI20 */
0x0c, /* SSI3 */
0x0d, /* SSI4 */
0x0e, /* SSI5 */
0x0f, /* SSI6 */
0x10, /* SSI7 */
0x11, /* SSI8 */
0x12, /* SSI90 */
};
static const u8 gen2_id_table_scu[] = {
0x2d, /* SCU_SRCI0 */
0x2e, /* SCU_SRCI1 */
0x2f, /* SCU_SRCI2 */
0x30, /* SCU_SRCI3 */
0x31, /* SCU_SRCI4 */
0x32, /* SCU_SRCI5 */
0x33, /* SCU_SRCI6 */
0x34, /* SCU_SRCI7 */
0x35, /* SCU_SRCI8 */
0x36, /* SCU_SRCI9 */
};
static const u8 gen2_id_table_cmd[] = {
0x37, /* SCU_CMD0 */
0x38, /* SCU_CMD1 */
};
static u32 rsnd_dmapp_get_id(struct rsnd_dai_stream *io,
struct rsnd_mod *mod)
{
struct rsnd_mod *ssi = rsnd_io_to_mod_ssi(io);
struct rsnd_mod *src = rsnd_io_to_mod_src(io);
struct rsnd_mod *dvc = rsnd_io_to_mod_dvc(io);
const u8 *entry = NULL;
int id = rsnd_mod_id(mod);
int size = 0;
if (mod == ssi) {
entry = gen2_id_table_ssiu;
size = ARRAY_SIZE(gen2_id_table_ssiu);
} else if (mod == src) {
entry = gen2_id_table_scu;
size = ARRAY_SIZE(gen2_id_table_scu);
} else if (mod == dvc) {
entry = gen2_id_table_cmd;
size = ARRAY_SIZE(gen2_id_table_cmd);
}
if ((!entry) || (size <= id)) {
struct device *dev = rsnd_priv_to_dev(rsnd_io_to_priv(io));
dev_err(dev, "unknown connection (%s[%d])\n",
rsnd_mod_name(mod), rsnd_mod_id(mod));
/* use non-prohibited SRS number as error */
return 0x00; /* SSI00 */
}
return entry[id];
}
static u32 rsnd_dmapp_get_chcr(struct rsnd_dai_stream *io,
struct rsnd_mod *mod_from,
struct rsnd_mod *mod_to)
{
return (rsnd_dmapp_get_id(io, mod_from) << 24) +
(rsnd_dmapp_get_id(io, mod_to) << 16);
}
#define rsnd_dmapp_addr(dmac, dma, reg) \
(dmac->base + 0x20 + reg + \
(0x10 * rsnd_dma_to_dmapp(dma)->dmapp_id))
static void rsnd_dmapp_write(struct rsnd_dma *dma, u32 data, u32 reg)
{
struct rsnd_mod *mod = rsnd_mod_get(dma);
struct rsnd_priv *priv = rsnd_mod_to_priv(mod);
struct rsnd_dma_ctrl *dmac = rsnd_priv_to_dmac(priv);
struct device *dev = rsnd_priv_to_dev(priv);
dev_dbg(dev, "w %p : %08x\n", rsnd_dmapp_addr(dmac, dma, reg), data);
iowrite32(data, rsnd_dmapp_addr(dmac, dma, reg));
}
static u32 rsnd_dmapp_read(struct rsnd_dma *dma, u32 reg)
{
struct rsnd_mod *mod = rsnd_mod_get(dma);
struct rsnd_priv *priv = rsnd_mod_to_priv(mod);
struct rsnd_dma_ctrl *dmac = rsnd_priv_to_dmac(priv);
return ioread32(rsnd_dmapp_addr(dmac, dma, reg));
}
static int rsnd_dmapp_stop(struct rsnd_mod *mod,
struct rsnd_dai_stream *io,
struct rsnd_priv *priv)
{
struct rsnd_dma *dma = rsnd_mod_to_dma(mod);
int i;
rsnd_dmapp_write(dma, 0, PDMACHCR);
for (i = 0; i < 1024; i++) {
if (0 == rsnd_dmapp_read(dma, PDMACHCR))
return 0;
udelay(1);
}
return -EIO;
}
static int rsnd_dmapp_start(struct rsnd_mod *mod,
struct rsnd_dai_stream *io,
struct rsnd_priv *priv)
{
struct rsnd_dma *dma = rsnd_mod_to_dma(mod);
struct rsnd_dmapp *dmapp = rsnd_dma_to_dmapp(dma);
rsnd_dmapp_write(dma, dma->src_addr, PDMASAR);
rsnd_dmapp_write(dma, dma->dst_addr, PDMADAR);
rsnd_dmapp_write(dma, dmapp->chcr, PDMACHCR);
return 0;
}
static int rsnd_dmapp_attach(struct rsnd_dai_stream *io,
struct rsnd_dma *dma, int id,
struct rsnd_mod *mod_from, struct rsnd_mod *mod_to)
{
struct rsnd_dmapp *dmapp = rsnd_dma_to_dmapp(dma);
struct rsnd_priv *priv = rsnd_io_to_priv(io);
struct rsnd_dma_ctrl *dmac = rsnd_priv_to_dmac(priv);
struct device *dev = rsnd_priv_to_dev(priv);
dmapp->dmapp_id = dmac->dmapp_num;
dmapp->chcr = rsnd_dmapp_get_chcr(io, mod_from, mod_to) | PDMACHCR_DE;
dmac->dmapp_num++;
dev_dbg(dev, "id/src/dst/chcr = %d/%pad/%pad/%08x\n",
dmapp->dmapp_id, &dma->src_addr, &dma->dst_addr, dmapp->chcr);
return 0;
}
static struct rsnd_mod_ops rsnd_dmapp_ops = {
.name = "audmac-pp",
.start = rsnd_dmapp_start,
.stop = rsnd_dmapp_stop,
.quit = rsnd_dmapp_stop,
};
/*
* Common DMAC Interface
*/
/*
* DMA read/write register offset
*
* RSND_xxx_I_N for Audio DMAC input
* RSND_xxx_O_N for Audio DMAC output
* RSND_xxx_I_P for Audio DMAC peri peri input
* RSND_xxx_O_P for Audio DMAC peri peri output
*
* ex) R-Car H2 case
* mod / DMAC in / DMAC out / DMAC PP in / DMAC pp out
* SSI : 0xec541000 / 0xec241008 / 0xec24100c
* SSIU: 0xec541000 / 0xec100000 / 0xec100000 / 0xec400000 / 0xec400000
* SCU : 0xec500000 / 0xec000000 / 0xec004000 / 0xec300000 / 0xec304000
* CMD : 0xec500000 / / 0xec008000 0xec308000
*/
#define RDMA_SSI_I_N(addr, i) (addr ##_reg - 0x00300000 + (0x40 * i) + 0x8)
#define RDMA_SSI_O_N(addr, i) (addr ##_reg - 0x00300000 + (0x40 * i) + 0xc)
#define RDMA_SSIU_I_N(addr, i) (addr ##_reg - 0x00441000 + (0x1000 * i))
#define RDMA_SSIU_O_N(addr, i) (addr ##_reg - 0x00441000 + (0x1000 * i))
#define RDMA_SSIU_I_P(addr, i) (addr ##_reg - 0x00141000 + (0x1000 * i))
#define RDMA_SSIU_O_P(addr, i) (addr ##_reg - 0x00141000 + (0x1000 * i))
#define RDMA_SRC_I_N(addr, i) (addr ##_reg - 0x00500000 + (0x400 * i))
#define RDMA_SRC_O_N(addr, i) (addr ##_reg - 0x004fc000 + (0x400 * i))
#define RDMA_SRC_I_P(addr, i) (addr ##_reg - 0x00200000 + (0x400 * i))
#define RDMA_SRC_O_P(addr, i) (addr ##_reg - 0x001fc000 + (0x400 * i))
#define RDMA_CMD_O_N(addr, i) (addr ##_reg - 0x004f8000 + (0x400 * i))
#define RDMA_CMD_O_P(addr, i) (addr ##_reg - 0x001f8000 + (0x400 * i))
static dma_addr_t
rsnd_gen2_dma_addr(struct rsnd_dai_stream *io,
struct rsnd_mod *mod,
int is_play, int is_from)
{
struct rsnd_priv *priv = rsnd_io_to_priv(io);
struct device *dev = rsnd_priv_to_dev(priv);
phys_addr_t ssi_reg = rsnd_gen_get_phy_addr(priv, RSND_GEN2_SSI);
phys_addr_t src_reg = rsnd_gen_get_phy_addr(priv, RSND_GEN2_SCU);
int is_ssi = !!(rsnd_io_to_mod_ssi(io) == mod);
int use_src = !!rsnd_io_to_mod_src(io);
int use_cmd = !!rsnd_io_to_mod_dvc(io) ||
!!rsnd_io_to_mod_mix(io) ||
!!rsnd_io_to_mod_ctu(io);
int id = rsnd_mod_id(mod);
struct dma_addr {
dma_addr_t out_addr;
dma_addr_t in_addr;
} dma_addrs[3][2][3] = {
/* SRC */
{{{ 0, 0 },
/* Capture */
{ RDMA_SRC_O_N(src, id), RDMA_SRC_I_P(src, id) },
{ RDMA_CMD_O_N(src, id), RDMA_SRC_I_P(src, id) } },
/* Playback */
{{ 0, 0, },
{ RDMA_SRC_O_P(src, id), RDMA_SRC_I_N(src, id) },
{ RDMA_CMD_O_P(src, id), RDMA_SRC_I_N(src, id) } }
},
/* SSI */
/* Capture */
{{{ RDMA_SSI_O_N(ssi, id), 0 },
{ RDMA_SSIU_O_P(ssi, id), 0 },
{ RDMA_SSIU_O_P(ssi, id), 0 } },
/* Playback */
{{ 0, RDMA_SSI_I_N(ssi, id) },
{ 0, RDMA_SSIU_I_P(ssi, id) },
{ 0, RDMA_SSIU_I_P(ssi, id) } }
},
/* SSIU */
/* Capture */
{{{ RDMA_SSIU_O_N(ssi, id), 0 },
{ RDMA_SSIU_O_P(ssi, id), 0 },
{ RDMA_SSIU_O_P(ssi, id), 0 } },
/* Playback */
{{ 0, RDMA_SSIU_I_N(ssi, id) },
{ 0, RDMA_SSIU_I_P(ssi, id) },
{ 0, RDMA_SSIU_I_P(ssi, id) } } },
};
/* it shouldn't happen */
if (use_cmd && !use_src)
dev_err(dev, "DVC is selected without SRC\n");
/* use SSIU or SSI ? */
if (is_ssi && rsnd_ssi_use_busif(io))
is_ssi++;
return (is_from) ?
dma_addrs[is_ssi][is_play][use_src + use_cmd].out_addr :
dma_addrs[is_ssi][is_play][use_src + use_cmd].in_addr;
}
static dma_addr_t rsnd_dma_addr(struct rsnd_dai_stream *io,
struct rsnd_mod *mod,
int is_play, int is_from)
{
struct rsnd_priv *priv = rsnd_io_to_priv(io);
/*
* gen1 uses default DMA addr
*/
if (rsnd_is_gen1(priv))
return 0;
if (!mod)
return 0;
return rsnd_gen2_dma_addr(io, mod, is_play, is_from);
}
#define MOD_MAX (RSND_MOD_MAX + 1) /* +Memory */
static void rsnd_dma_of_path(struct rsnd_mod *this,
struct rsnd_dai_stream *io,
int is_play,
struct rsnd_mod **mod_from,
struct rsnd_mod **mod_to)
{
struct rsnd_mod *ssi = rsnd_io_to_mod_ssi(io);
struct rsnd_mod *src = rsnd_io_to_mod_src(io);
struct rsnd_mod *ctu = rsnd_io_to_mod_ctu(io);
struct rsnd_mod *mix = rsnd_io_to_mod_mix(io);
struct rsnd_mod *dvc = rsnd_io_to_mod_dvc(io);
struct rsnd_mod *mod[MOD_MAX];
struct rsnd_mod *mod_start, *mod_end;
struct rsnd_priv *priv = rsnd_mod_to_priv(this);
struct device *dev = rsnd_priv_to_dev(priv);
int nr, i, idx;
if (!ssi)
return;
nr = 0;
for (i = 0; i < MOD_MAX; i++) {
mod[i] = NULL;
nr += !!rsnd_io_to_mod(io, i);
}
/*
* [S] -*-> [E]
* [S] -*-> SRC -o-> [E]
* [S] -*-> SRC -> DVC -o-> [E]
* [S] -*-> SRC -> CTU -> MIX -> DVC -o-> [E]
*
* playback [S] = mem
* [E] = SSI
*
* capture [S] = SSI
* [E] = mem
*
* -*-> Audio DMAC
* -o-> Audio DMAC peri peri
*/
mod_start = (is_play) ? NULL : ssi;
mod_end = (is_play) ? ssi : NULL;
idx = 0;
mod[idx++] = mod_start;
for (i = 1; i < nr; i++) {
if (src) {
mod[idx++] = src;
src = NULL;
} else if (ctu) {
mod[idx++] = ctu;
ctu = NULL;
} else if (mix) {
mod[idx++] = mix;
mix = NULL;
} else if (dvc) {
mod[idx++] = dvc;
dvc = NULL;
}
}
mod[idx] = mod_end;
/*
* | SSI | SRC |
* -------------+-----+-----+
* is_play | o | * |
* !is_play | * | o |
*/
if ((this == ssi) == (is_play)) {
*mod_from = mod[idx - 1];
*mod_to = mod[idx];
} else {
*mod_from = mod[0];
*mod_to = mod[1];
}
dev_dbg(dev, "module connection (this is %s[%d])\n",
rsnd_mod_name(this), rsnd_mod_id(this));
for (i = 0; i <= idx; i++) {
dev_dbg(dev, " %s[%d]%s\n",
rsnd_mod_name(mod[i]), rsnd_mod_id(mod[i]),
(mod[i] == *mod_from) ? " from" :
(mod[i] == *mod_to) ? " to" : "");
}
}
int rsnd_dma_attach(struct rsnd_dai_stream *io, struct rsnd_mod *mod,
struct rsnd_mod **dma_mod, int id)
{
struct rsnd_mod *mod_from = NULL;
struct rsnd_mod *mod_to = NULL;
struct rsnd_priv *priv = rsnd_io_to_priv(io);
struct rsnd_dma_ctrl *dmac = rsnd_priv_to_dmac(priv);
struct device *dev = rsnd_priv_to_dev(priv);
struct rsnd_mod_ops *ops;
enum rsnd_mod_type type;
int (*attach)(struct rsnd_dai_stream *io, struct rsnd_dma *dma, int id,
struct rsnd_mod *mod_from, struct rsnd_mod *mod_to);
int is_play = rsnd_io_is_play(io);
int ret, dma_id;
/*
* DMA failed. try to PIO mode
* see
* rsnd_ssi_fallback()
* rsnd_rdai_continuance_probe()
*/
if (!dmac)
return -EAGAIN;
rsnd_dma_of_path(mod, io, is_play, &mod_from, &mod_to);
/* for Gen2 */
if (mod_from && mod_to) {
ops = &rsnd_dmapp_ops;
attach = rsnd_dmapp_attach;
dma_id = dmac->dmapp_num;
type = RSND_MOD_AUDMAPP;
} else {
ops = &rsnd_dmaen_ops;
attach = rsnd_dmaen_attach;
dma_id = dmac->dmaen_num;
type = RSND_MOD_AUDMA;
}
/* for Gen1, overwrite */
if (rsnd_is_gen1(priv)) {
ops = &rsnd_dmaen_ops;
attach = rsnd_dmaen_attach;
dma_id = dmac->dmaen_num;
type = RSND_MOD_AUDMA;
}
if (!(*dma_mod)) {
struct rsnd_dma *dma;
dma = devm_kzalloc(dev, sizeof(*dma), GFP_KERNEL);
if (!dma)
return -ENOMEM;
*dma_mod = rsnd_mod_get(dma);
dma->src_addr = rsnd_dma_addr(io, mod_from, is_play, 1);
dma->dst_addr = rsnd_dma_addr(io, mod_to, is_play, 0);
ret = rsnd_mod_init(priv, *dma_mod, ops, NULL,
rsnd_mod_get_status, type, dma_id);
if (ret < 0)
return ret;
dev_dbg(dev, "%s[%d] %s[%d] -> %s[%d]\n",
rsnd_mod_name(*dma_mod), rsnd_mod_id(*dma_mod),
rsnd_mod_name(mod_from), rsnd_mod_id(mod_from),
rsnd_mod_name(mod_to), rsnd_mod_id(mod_to));
ret = attach(io, dma, id, mod_from, mod_to);
if (ret < 0)
return ret;
}
ret = rsnd_dai_connect(*dma_mod, io, type);
if (ret < 0)
return ret;
return 0;
}
int rsnd_dma_probe(struct rsnd_priv *priv)
{
struct platform_device *pdev = rsnd_priv_to_pdev(priv);
struct device *dev = rsnd_priv_to_dev(priv);
struct rsnd_dma_ctrl *dmac;
struct resource *res;
/*
* for Gen1
*/
if (rsnd_is_gen1(priv))
return 0;
/*
* for Gen2
*/
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "audmapp");
dmac = devm_kzalloc(dev, sizeof(*dmac), GFP_KERNEL);
if (!dmac || !res) {
dev_err(dev, "dma allocate failed\n");
return 0; /* it will be PIO mode */
}
dmac->dmapp_num = 0;
dmac->base = devm_ioremap_resource(dev, res);
if (IS_ERR(dmac->base))
return PTR_ERR(dmac->base);
priv->dma = dmac;
return 0;
}