redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity
alistair23-linux/include/linux/platform_data/mtd-nand-omap2.h

68 lines
2.1 KiB
C
Raw Normal View History

ARM: OMAP1: Make omap1 boards to use omap_nand_platform_data This patch adds omap_nand_platform data based on a patch by Shahrom Sharif-Kashani <sshahrom@micron.com>, and makes omap1 boards to use omap_nand_platform_data instead of nand_platform_data used earlier. Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-12-11 14:50:17 -07:00
/*
* Copyright (C) 2006 Micron Technology Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
ARM: OMAP2+: nand: header cleanup For common arm zImage existing nand header file in platform specific location was moved to generic platform data location, but it contained more than platform data, remove it. New local header has been created for exposing functions. Also move gpmc-nand platform data to platform header meant for nand from gpmc header file Signed-off-by: Afzal Mohammed <afzal@ti.com>
2012-09-29 00:56:13 -06:00
#ifndef _MTD_NAND_OMAP2_H
#define _MTD_NAND_OMAP2_H
ARM: OMAP1: Make omap1 boards to use omap_nand_platform_data This patch adds omap_nand_platform data based on a patch by Shahrom Sharif-Kashani <sshahrom@micron.com>, and makes omap1 boards to use omap_nand_platform_data instead of nand_platform_data used earlier. Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-12-11 14:50:17 -07:00
#include <linux/mtd/partitions.h>
ARM: OMAP2+: gpmc: nand register helper bch update Update helper function that provides gpmc-nand register details for nand driver with bch register information. Using this nand driver can be made self sufficient to handle remaining gpmc-nand operations by itself instead of relying on gpmc exported nand functions. Signed-off-by: Afzal Mohammed <afzal@ti.com>
2012-10-04 04:19:04 -06:00
#define GPMC_BCH_NUM_REMAINDER 8
omap3: nand: configurable transfer type per board nand transfer type (sDMA, Polled, prefetch) can be select from board file, enabling all transfer type in driver, by default. this helps in multi-omap build and to select different transfer type for different board. Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-01-28 03:12:04 -07:00
enum nand_io {
NAND_OMAP_PREFETCH_POLLED = 0, /* prefetch polled mode, default */
NAND_OMAP_POLLED, /* polled mode, without prefetch */
omap3: nand: prefetch in irq mode support This patch enable prefetch-irq mode for nand transfer(read, write) Signed-off-by: Vimal Singh <vimalsingh@ti.com> Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-01-28 03:12:06 -07:00
NAND_OMAP_PREFETCH_DMA, /* prefetch enabled sDMA mode */
NAND_OMAP_PREFETCH_IRQ /* prefetch enabled irq mode */
omap3: nand: configurable transfer type per board nand transfer type (sDMA, Polled, prefetch) can be select from board file, enabling all transfer type in driver, by default. this helps in multi-omap build and to select different transfer type for different board. Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-01-28 03:12:04 -07:00
};
ARM: OMAP2+: nand: header cleanup For common arm zImage existing nand header file in platform specific location was moved to generic platform data location, but it contained more than platform data, remove it. New local header has been created for exposing functions. Also move gpmc-nand platform data to platform header meant for nand from gpmc header file Signed-off-by: Afzal Mohammed <afzal@ti.com>
2012-09-29 00:56:13 -06:00
enum omap_ecc {
mtd: nand: omap: Revert to using software ECC by default For v3.12 and prior, 1-bit Hamming code ECC via software was the default choice. Commit c66d039197e4 in v3.13 changed the behaviour to use 1-bit Hamming code via Hardware using a different ECC layout i.e. (ROM code layout) than what is used by software ECC. This ECC layout change causes NAND filesystems created in v3.12 and prior to be unusable in v3.13 and later. So revert back to using software ECC by default if an ECC scheme is not explicitely specified. This defect can be observed on the following boards during legacy boot -omap3beagle -omap3touchbook -overo -am3517crane -devkit8000 -ldp -3430sdp Signed-off-by: Roger Quadros <rogerq@ti.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-08-25 17:15:32 -06:00
/*
* 1-bit ECC: calculation and correction by SW
* ECC stored at end of spare area
*/
OMAP_ECC_HAM1_CODE_SW = 0,
/*
* 1-bit ECC: calculation by GPMC, Error detection by Software
* ECC layout compatible with ROM code layout
*/
OMAP_ECC_HAM1_CODE_HW,
ARM: OMAP2+: cleaned-up DT support of various ECC schemes OMAP NAND driver support multiple ECC scheme, which can used in different flavours, depending on in-build Hardware engines present on SoC. This patch updates following in DT bindings related to sectionion of ecc-schemes - ti,elm-id: replaces elm_id (maintains backward compatibility) - ti,nand-ecc-opts: selection of h/w or s/w implementation of an ecc-scheme depends on ti,elm-id. (supported values ham1, bch4, and bch8) - maintain backward compatibility to deprecated DT bindings (sw, hw, hw-romcode) Below table shows different flavours of ecc-schemes supported by OMAP devices +---------------------------------------+---------------+---------------+ | ECC scheme |ECC calculation|Error detection| +---------------------------------------+---------------+---------------+ |OMAP_ECC_HAM1_CODE_HW |H/W (GPMC) |S/W | +---------------------------------------+---------------+---------------+ |OMAP_ECC_BCH8_CODE_HW_DETECTION_SW |H/W (GPMC) |S/W | |(requires CONFIG_MTD_NAND_ECC_BCH) | | | +---------------------------------------+---------------+---------------+ |OMAP_ECC_BCH8_CODE_HW |H/W (GPMC) |H/W (ELM) | |(requires CONFIG_MTD_NAND_OMAP_BCH && | | | | ti,elm-id in DT) | | | +---------------------------------------+---------------+---------------+ To optimize footprint of omap2-nand driver, selection of some ECC schemes also require enabling following Kconfigs, in addition to setting appropriate DT bindings - Kconfig:CONFIG_MTD_NAND_ECC_BCH error detection done in software - Kconfig:CONFIG_MTD_NAND_OMAP_BCH error detection done by h/w engine Signed-off-by: Pekon Gupta <pekon@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-10-24 06:50:17 -06:00
/* 4-bit ECC calculation by GPMC, Error detection by Software */
OMAP_ECC_BCH4_CODE_HW_DETECTION_SW,
/* 4-bit ECC calculation by GPMC, Error detection by ELM */
OMAP_ECC_BCH4_CODE_HW,
/* 8-bit ECC calculation by GPMC, Error detection by Software */
OMAP_ECC_BCH8_CODE_HW_DETECTION_SW,
/* 8-bit ECC calculation by GPMC, Error detection by ELM */
OMAP_ECC_BCH8_CODE_HW,
mtd: nand: omap: add support for BCH16_ECC - GPMC driver updates This patch add support for BCH16_ECC in GPMC (controller) driver: - extends configuration space to include BCH16 registers - extends parsing of DT binding for selecting BCH16 ecc-scheme Signed-off-by: Pekon Gupta <pekon@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-05-19 01:54:39 -06:00
/* 16-bit ECC calculation by GPMC, Error detection by ELM */
OMAP_ECC_BCH16_CODE_HW,
ARM: OMAP2+: nand: header cleanup For common arm zImage existing nand header file in platform specific location was moved to generic platform data location, but it contained more than platform data, remove it. New local header has been created for exposing functions. Also move gpmc-nand platform data to platform header meant for nand from gpmc header file Signed-off-by: Afzal Mohammed <afzal@ti.com>
2012-09-29 00:56:13 -06:00
};
struct gpmc_nand_regs {
void __iomem *gpmc_nand_command;
void __iomem *gpmc_nand_address;
void __iomem *gpmc_nand_data;
void __iomem *gpmc_prefetch_config1;
void __iomem *gpmc_prefetch_config2;
void __iomem *gpmc_prefetch_control;
void __iomem *gpmc_prefetch_status;
void __iomem *gpmc_ecc_config;
void __iomem *gpmc_ecc_control;
void __iomem *gpmc_ecc_size_config;
void __iomem *gpmc_ecc1_result;
ARM: OMAP2+: gpmc: nand register helper bch update Update helper function that provides gpmc-nand register details for nand driver with bch register information. Using this nand driver can be made self sufficient to handle remaining gpmc-nand operations by itself instead of relying on gpmc exported nand functions. Signed-off-by: Afzal Mohammed <afzal@ti.com>
2012-10-04 04:19:04 -06:00
void __iomem *gpmc_bch_result0[GPMC_BCH_NUM_REMAINDER];
void __iomem *gpmc_bch_result1[GPMC_BCH_NUM_REMAINDER];
void __iomem *gpmc_bch_result2[GPMC_BCH_NUM_REMAINDER];
void __iomem *gpmc_bch_result3[GPMC_BCH_NUM_REMAINDER];
mtd: nand: omap: add support for BCH16_ECC - GPMC driver updates This patch add support for BCH16_ECC in GPMC (controller) driver: - extends configuration space to include BCH16 registers - extends parsing of DT binding for selecting BCH16 ecc-scheme Signed-off-by: Pekon Gupta <pekon@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-05-19 01:54:39 -06:00
void __iomem *gpmc_bch_result4[GPMC_BCH_NUM_REMAINDER];
void __iomem *gpmc_bch_result5[GPMC_BCH_NUM_REMAINDER];
void __iomem *gpmc_bch_result6[GPMC_BCH_NUM_REMAINDER];
ARM: OMAP2+: nand: header cleanup For common arm zImage existing nand header file in platform specific location was moved to generic platform data location, but it contained more than platform data, remove it. New local header has been created for exposing functions. Also move gpmc-nand platform data to platform header meant for nand from gpmc header file Signed-off-by: Afzal Mohammed <afzal@ti.com>
2012-09-29 00:56:13 -06:00
};
omap: fix the compile error if CONFIG_MTD_NAND_OMAP2 is notenabled If CONFIG_MTD_NAND_OMAP2 is not enabled, there will be a compile error, "gpmc_nand_init() is not defined". Add a inline noop function to fix it. Signed-off-by: Stanley.Miao <stanley.miao@windriver.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-20 00:33:26 -06:00
#endif