1
0
Fork 0
alistair23-linux/kernel/events/uprobes.c

2027 lines
49 KiB
C
Raw Normal View History

uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
/*
* User-space Probes (UProbes)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
* Copyright (C) IBM Corporation, 2008-2012
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
* Authors:
* Srikar Dronamraju
* Jim Keniston
* Copyright (C) 2011-2012 Red Hat, Inc., Peter Zijlstra
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
*/
#include <linux/kernel.h>
#include <linux/highmem.h>
#include <linux/pagemap.h> /* read_mapping_page */
#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/export.h>
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
#include <linux/rmap.h> /* anon_vma_prepare */
#include <linux/mmu_notifier.h> /* set_pte_at_notify */
#include <linux/swap.h> /* try_to_free_swap */
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-13 12:00:11 -06:00
#include <linux/ptrace.h> /* user_enable_single_step */
#include <linux/kdebug.h> /* notifier mechanism */
#include "../../mm/internal.h" /* munlock_vma_page */
#include <linux/percpu-rwsem.h>
uprobes: Change uprobe_copy_process() to dup xol_area This finally fixes the serious bug in uretprobes: a forked child crashes if the parent called fork() with the pending ret probe. Trivial test-case: # perf probe -x /lib/libc.so.6 __fork%return # perf record -e probe_libc:__fork perl -le 'fork || print "OK"' (the child doesn't print "OK", it is killed by SIGSEGV) If the child returns from the probed function it actually returns to trampoline_vaddr, because it got the copy of parent's stack mangled by prepare_uretprobe() when the parent entered this func. It crashes because a) this address is not mapped and b) until the previous change it doesn't have the proper->return_instances info. This means that uprobe_copy_process() has to create xol_area which has the trampoline slot, and its vaddr should be equal to parent's xol_area->vaddr. Unfortunately, uprobe_copy_process() can not simply do __create_xol_area(child, xol_area->vaddr). This could actually work but perf_event_mmap() doesn't expect the usage of foreign ->mm. So we offload this to task_work_run(), and pass the argument via not yet used utask->vaddr. We know that this vaddr is fine for install_special_mapping(), the necessary hole was recently "created" by dup_mmap() which skips the parent's VM_DONTCOPY area, and nobody else could use the new mm. Unfortunately, this also means that we can not handle the errors properly, we obviously can not abort the already completed fork(). So we simply print the warning if GFP_KERNEL allocation (the only possible reason) fails. Reported-by: Martin Cermak <mcermak@redhat.com> Reported-by: David Smith <dsmith@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2013-10-13 13:18:44 -06:00
#include <linux/task_work.h>
#include <linux/shmem_fs.h>
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
#include <linux/uprobes.h>
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-30 12:26:31 -06:00
#define UINSNS_PER_PAGE (PAGE_SIZE/UPROBE_XOL_SLOT_BYTES)
#define MAX_UPROBE_XOL_SLOTS UINSNS_PER_PAGE
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
static struct rb_root uprobes_tree = RB_ROOT;
/*
* allows us to skip the uprobe_mmap if there are no uprobe events active
* at this time. Probably a fine grained per inode count is better?
*/
#define no_uprobe_events() RB_EMPTY_ROOT(&uprobes_tree)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
static DEFINE_SPINLOCK(uprobes_treelock); /* serialize rbtree access */
#define UPROBES_HASH_SZ 13
/* serialize uprobe->pending_list */
static struct mutex uprobes_mmap_mutex[UPROBES_HASH_SZ];
#define uprobes_mmap_hash(v) (&uprobes_mmap_mutex[((unsigned long)(v)) % UPROBES_HASH_SZ])
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
static struct percpu_rw_semaphore dup_mmap_sem;
/* Have a copy of original instruction */
#define UPROBE_COPY_INSN 0
struct uprobe {
struct rb_node rb_node; /* node in the rb tree */
atomic_t ref;
struct rw_semaphore register_rwsem;
struct rw_semaphore consumer_rwsem;
struct list_head pending_list;
struct uprobe_consumer *consumers;
struct inode *inode; /* Also hold a ref to inode */
loff_t offset;
unsigned long flags;
/*
* The generic code assumes that it has two members of unknown type
* owned by the arch-specific code:
*
* insn - copy_insn() saves the original instruction here for
* arch_uprobe_analyze_insn().
*
* ixol - potentially modified instruction to execute out of
* line, copied to xol_area by xol_get_insn_slot().
*/
struct arch_uprobe arch;
};
/*
* Execute out of line area: anonymous executable mapping installed
* by the probed task to execute the copy of the original instruction
* mangled by set_swbp().
*
* On a breakpoint hit, thread contests for a slot. It frees the
* slot after singlestep. Currently a fixed number of slots are
* allocated.
*/
struct xol_area {
wait_queue_head_t wq; /* if all slots are busy */
atomic_t slot_count; /* number of in-use slots */
unsigned long *bitmap; /* 0 = free slot */
struct vm_special_mapping xol_mapping;
struct page *pages[2];
/*
* We keep the vma's vm_start rather than a pointer to the vma
* itself. The probed process or a naughty kernel module could make
* the vma go away, and we must handle that reasonably gracefully.
*/
unsigned long vaddr; /* Page(s) of instruction slots */
};
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
/*
* valid_vma: Verify if the specified vma is an executable vma
* Relax restrictions while unregistering: vm_flags might have
* changed after breakpoint was inserted.
* - is_register: indicates if we are in register context.
* - Return 1 if the specified virtual address is in an
* executable vma.
*/
static bool valid_vma(struct vm_area_struct *vma, bool is_register)
{
vm_flags_t flags = VM_HUGETLB | VM_MAYEXEC | VM_MAYSHARE;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
if (is_register)
flags |= VM_WRITE;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
return vma->vm_file && (vma->vm_flags & flags) == VM_MAYEXEC;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
}
static unsigned long offset_to_vaddr(struct vm_area_struct *vma, loff_t offset)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
{
return vma->vm_start + offset - ((loff_t)vma->vm_pgoff << PAGE_SHIFT);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
}
static loff_t vaddr_to_offset(struct vm_area_struct *vma, unsigned long vaddr)
{
return ((loff_t)vma->vm_pgoff << PAGE_SHIFT) + (vaddr - vma->vm_start);
}
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
/**
* __replace_page - replace page in vma by new page.
* based on replace_page in mm/ksm.c
*
* @vma: vma that holds the pte pointing to page
* @addr: address the old @page is mapped at
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
* @page: the cowed page we are replacing by kpage
* @kpage: the modified page we replace page by
*
* Returns 0 on success, -EFAULT on failure.
*/
static int __replace_page(struct vm_area_struct *vma, unsigned long addr,
struct page *page, struct page *kpage)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
{
struct mm_struct *mm = vma->vm_mm;
spinlock_t *ptl;
pte_t *ptep;
int err;
/* For mmu_notifiers */
const unsigned long mmun_start = addr;
const unsigned long mmun_end = addr + PAGE_SIZE;
mm: memcontrol: rewrite charge API These patches rework memcg charge lifetime to integrate more naturally with the lifetime of user pages. This drastically simplifies the code and reduces charging and uncharging overhead. The most expensive part of charging and uncharging is the page_cgroup bit spinlock, which is removed entirely after this series. Here are the top-10 profile entries of a stress test that reads a 128G sparse file on a freshly booted box, without even a dedicated cgroup (i.e. executing in the root memcg). Before: 15.36% cat [kernel.kallsyms] [k] copy_user_generic_string 13.31% cat [kernel.kallsyms] [k] memset 11.48% cat [kernel.kallsyms] [k] do_mpage_readpage 4.23% cat [kernel.kallsyms] [k] get_page_from_freelist 2.38% cat [kernel.kallsyms] [k] put_page 2.32% cat [kernel.kallsyms] [k] __mem_cgroup_commit_charge 2.18% kswapd0 [kernel.kallsyms] [k] __mem_cgroup_uncharge_common 1.92% kswapd0 [kernel.kallsyms] [k] shrink_page_list 1.86% cat [kernel.kallsyms] [k] __radix_tree_lookup 1.62% cat [kernel.kallsyms] [k] __pagevec_lru_add_fn After: 15.67% cat [kernel.kallsyms] [k] copy_user_generic_string 13.48% cat [kernel.kallsyms] [k] memset 11.42% cat [kernel.kallsyms] [k] do_mpage_readpage 3.98% cat [kernel.kallsyms] [k] get_page_from_freelist 2.46% cat [kernel.kallsyms] [k] put_page 2.13% kswapd0 [kernel.kallsyms] [k] shrink_page_list 1.88% cat [kernel.kallsyms] [k] __radix_tree_lookup 1.67% cat [kernel.kallsyms] [k] __pagevec_lru_add_fn 1.39% kswapd0 [kernel.kallsyms] [k] free_pcppages_bulk 1.30% cat [kernel.kallsyms] [k] kfree As you can see, the memcg footprint has shrunk quite a bit. text data bss dec hex filename 37970 9892 400 48262 bc86 mm/memcontrol.o.old 35239 9892 400 45531 b1db mm/memcontrol.o This patch (of 4): The memcg charge API charges pages before they are rmapped - i.e. have an actual "type" - and so every callsite needs its own set of charge and uncharge functions to know what type is being operated on. Worse, uncharge has to happen from a context that is still type-specific, rather than at the end of the page's lifetime with exclusive access, and so requires a lot of synchronization. Rewrite the charge API to provide a generic set of try_charge(), commit_charge() and cancel_charge() transaction operations, much like what's currently done for swap-in: mem_cgroup_try_charge() attempts to reserve a charge, reclaiming pages from the memcg if necessary. mem_cgroup_commit_charge() commits the page to the charge once it has a valid page->mapping and PageAnon() reliably tells the type. mem_cgroup_cancel_charge() aborts the transaction. This reduces the charge API and enables subsequent patches to drastically simplify uncharging. As pages need to be committed after rmap is established but before they are added to the LRU, page_add_new_anon_rmap() must stop doing LRU additions again. Revive lru_cache_add_active_or_unevictable(). [hughd@google.com: fix shmem_unuse] [hughd@google.com: Add comments on the private use of -EAGAIN] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 15:19:20 -06:00
struct mem_cgroup *memcg;
memcg: adjust to support new THP refcounting As with rmap, with new refcounting we cannot rely on PageTransHuge() to check if we need to charge size of huge page form the cgroup. We need to get information from caller to know whether it was mapped with PMD or PTE. We do uncharge when last reference on the page gone. At that point if we see PageTransHuge() it means we need to unchange whole huge page. The tricky part is partial unmap -- when we try to unmap part of huge page. We don't do a special handing of this situation, meaning we don't uncharge the part of huge page unless last user is gone or split_huge_page() is triggered. In case of cgroup memory pressure happens the partial unmapped page will be split through shrinker. This should be good enough. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Tested-by: Sasha Levin <sasha.levin@oracle.com> Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Jerome Marchand <jmarchan@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Steve Capper <steve.capper@linaro.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-15 17:52:20 -07:00
err = mem_cgroup_try_charge(kpage, vma->vm_mm, GFP_KERNEL, &memcg,
false);
mm: memcontrol: rewrite charge API These patches rework memcg charge lifetime to integrate more naturally with the lifetime of user pages. This drastically simplifies the code and reduces charging and uncharging overhead. The most expensive part of charging and uncharging is the page_cgroup bit spinlock, which is removed entirely after this series. Here are the top-10 profile entries of a stress test that reads a 128G sparse file on a freshly booted box, without even a dedicated cgroup (i.e. executing in the root memcg). Before: 15.36% cat [kernel.kallsyms] [k] copy_user_generic_string 13.31% cat [kernel.kallsyms] [k] memset 11.48% cat [kernel.kallsyms] [k] do_mpage_readpage 4.23% cat [kernel.kallsyms] [k] get_page_from_freelist 2.38% cat [kernel.kallsyms] [k] put_page 2.32% cat [kernel.kallsyms] [k] __mem_cgroup_commit_charge 2.18% kswapd0 [kernel.kallsyms] [k] __mem_cgroup_uncharge_common 1.92% kswapd0 [kernel.kallsyms] [k] shrink_page_list 1.86% cat [kernel.kallsyms] [k] __radix_tree_lookup 1.62% cat [kernel.kallsyms] [k] __pagevec_lru_add_fn After: 15.67% cat [kernel.kallsyms] [k] copy_user_generic_string 13.48% cat [kernel.kallsyms] [k] memset 11.42% cat [kernel.kallsyms] [k] do_mpage_readpage 3.98% cat [kernel.kallsyms] [k] get_page_from_freelist 2.46% cat [kernel.kallsyms] [k] put_page 2.13% kswapd0 [kernel.kallsyms] [k] shrink_page_list 1.88% cat [kernel.kallsyms] [k] __radix_tree_lookup 1.67% cat [kernel.kallsyms] [k] __pagevec_lru_add_fn 1.39% kswapd0 [kernel.kallsyms] [k] free_pcppages_bulk 1.30% cat [kernel.kallsyms] [k] kfree As you can see, the memcg footprint has shrunk quite a bit. text data bss dec hex filename 37970 9892 400 48262 bc86 mm/memcontrol.o.old 35239 9892 400 45531 b1db mm/memcontrol.o This patch (of 4): The memcg charge API charges pages before they are rmapped - i.e. have an actual "type" - and so every callsite needs its own set of charge and uncharge functions to know what type is being operated on. Worse, uncharge has to happen from a context that is still type-specific, rather than at the end of the page's lifetime with exclusive access, and so requires a lot of synchronization. Rewrite the charge API to provide a generic set of try_charge(), commit_charge() and cancel_charge() transaction operations, much like what's currently done for swap-in: mem_cgroup_try_charge() attempts to reserve a charge, reclaiming pages from the memcg if necessary. mem_cgroup_commit_charge() commits the page to the charge once it has a valid page->mapping and PageAnon() reliably tells the type. mem_cgroup_cancel_charge() aborts the transaction. This reduces the charge API and enables subsequent patches to drastically simplify uncharging. As pages need to be committed after rmap is established but before they are added to the LRU, page_add_new_anon_rmap() must stop doing LRU additions again. Revive lru_cache_add_active_or_unevictable(). [hughd@google.com: fix shmem_unuse] [hughd@google.com: Add comments on the private use of -EAGAIN] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 15:19:20 -06:00
if (err)
return err;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
/* For try_to_free_swap() and munlock_vma_page() below */
lock_page(page);
mmu_notifier_invalidate_range_start(mm, mmun_start, mmun_end);
err = -EAGAIN;
ptep = page_check_address(page, mm, addr, &ptl, 0);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
if (!ptep)
goto unlock;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
get_page(kpage);
page_add_new_anon_rmap(kpage, vma, addr, false);
memcg: adjust to support new THP refcounting As with rmap, with new refcounting we cannot rely on PageTransHuge() to check if we need to charge size of huge page form the cgroup. We need to get information from caller to know whether it was mapped with PMD or PTE. We do uncharge when last reference on the page gone. At that point if we see PageTransHuge() it means we need to unchange whole huge page. The tricky part is partial unmap -- when we try to unmap part of huge page. We don't do a special handing of this situation, meaning we don't uncharge the part of huge page unless last user is gone or split_huge_page() is triggered. In case of cgroup memory pressure happens the partial unmapped page will be split through shrinker. This should be good enough. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Tested-by: Sasha Levin <sasha.levin@oracle.com> Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Jerome Marchand <jmarchan@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Steve Capper <steve.capper@linaro.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-15 17:52:20 -07:00
mem_cgroup_commit_charge(kpage, memcg, false, false);
mm: memcontrol: rewrite charge API These patches rework memcg charge lifetime to integrate more naturally with the lifetime of user pages. This drastically simplifies the code and reduces charging and uncharging overhead. The most expensive part of charging and uncharging is the page_cgroup bit spinlock, which is removed entirely after this series. Here are the top-10 profile entries of a stress test that reads a 128G sparse file on a freshly booted box, without even a dedicated cgroup (i.e. executing in the root memcg). Before: 15.36% cat [kernel.kallsyms] [k] copy_user_generic_string 13.31% cat [kernel.kallsyms] [k] memset 11.48% cat [kernel.kallsyms] [k] do_mpage_readpage 4.23% cat [kernel.kallsyms] [k] get_page_from_freelist 2.38% cat [kernel.kallsyms] [k] put_page 2.32% cat [kernel.kallsyms] [k] __mem_cgroup_commit_charge 2.18% kswapd0 [kernel.kallsyms] [k] __mem_cgroup_uncharge_common 1.92% kswapd0 [kernel.kallsyms] [k] shrink_page_list 1.86% cat [kernel.kallsyms] [k] __radix_tree_lookup 1.62% cat [kernel.kallsyms] [k] __pagevec_lru_add_fn After: 15.67% cat [kernel.kallsyms] [k] copy_user_generic_string 13.48% cat [kernel.kallsyms] [k] memset 11.42% cat [kernel.kallsyms] [k] do_mpage_readpage 3.98% cat [kernel.kallsyms] [k] get_page_from_freelist 2.46% cat [kernel.kallsyms] [k] put_page 2.13% kswapd0 [kernel.kallsyms] [k] shrink_page_list 1.88% cat [kernel.kallsyms] [k] __radix_tree_lookup 1.67% cat [kernel.kallsyms] [k] __pagevec_lru_add_fn 1.39% kswapd0 [kernel.kallsyms] [k] free_pcppages_bulk 1.30% cat [kernel.kallsyms] [k] kfree As you can see, the memcg footprint has shrunk quite a bit. text data bss dec hex filename 37970 9892 400 48262 bc86 mm/memcontrol.o.old 35239 9892 400 45531 b1db mm/memcontrol.o This patch (of 4): The memcg charge API charges pages before they are rmapped - i.e. have an actual "type" - and so every callsite needs its own set of charge and uncharge functions to know what type is being operated on. Worse, uncharge has to happen from a context that is still type-specific, rather than at the end of the page's lifetime with exclusive access, and so requires a lot of synchronization. Rewrite the charge API to provide a generic set of try_charge(), commit_charge() and cancel_charge() transaction operations, much like what's currently done for swap-in: mem_cgroup_try_charge() attempts to reserve a charge, reclaiming pages from the memcg if necessary. mem_cgroup_commit_charge() commits the page to the charge once it has a valid page->mapping and PageAnon() reliably tells the type. mem_cgroup_cancel_charge() aborts the transaction. This reduces the charge API and enables subsequent patches to drastically simplify uncharging. As pages need to be committed after rmap is established but before they are added to the LRU, page_add_new_anon_rmap() must stop doing LRU additions again. Revive lru_cache_add_active_or_unevictable(). [hughd@google.com: fix shmem_unuse] [hughd@google.com: Add comments on the private use of -EAGAIN] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 15:19:20 -06:00
lru_cache_add_active_or_unevictable(kpage, vma);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
if (!PageAnon(page)) {
dec_mm_counter(mm, mm_counter_file(page));
inc_mm_counter(mm, MM_ANONPAGES);
}
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
flush_cache_page(vma, addr, pte_pfn(*ptep));
ptep_clear_flush_notify(vma, addr, ptep);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
set_pte_at_notify(mm, addr, ptep, mk_pte(kpage, vma->vm_page_prot));
page_remove_rmap(page, false);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
if (!page_mapped(page))
try_to_free_swap(page);
pte_unmap_unlock(ptep, ptl);
if (vma->vm_flags & VM_LOCKED)
munlock_vma_page(page);
put_page(page);
err = 0;
unlock:
memcg: adjust to support new THP refcounting As with rmap, with new refcounting we cannot rely on PageTransHuge() to check if we need to charge size of huge page form the cgroup. We need to get information from caller to know whether it was mapped with PMD or PTE. We do uncharge when last reference on the page gone. At that point if we see PageTransHuge() it means we need to unchange whole huge page. The tricky part is partial unmap -- when we try to unmap part of huge page. We don't do a special handing of this situation, meaning we don't uncharge the part of huge page unless last user is gone or split_huge_page() is triggered. In case of cgroup memory pressure happens the partial unmapped page will be split through shrinker. This should be good enough. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Tested-by: Sasha Levin <sasha.levin@oracle.com> Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Jerome Marchand <jmarchan@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Steve Capper <steve.capper@linaro.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-15 17:52:20 -07:00
mem_cgroup_cancel_charge(kpage, memcg, false);
mmu_notifier_invalidate_range_end(mm, mmun_start, mmun_end);
unlock_page(page);
return err;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
}
/**
* is_swbp_insn - check if instruction is breakpoint instruction.
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
* @insn: instruction to be checked.
* Default implementation of is_swbp_insn
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
* Returns true if @insn is a breakpoint instruction.
*/
bool __weak is_swbp_insn(uprobe_opcode_t *insn)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
{
return *insn == UPROBE_SWBP_INSN;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
}
/**
* is_trap_insn - check if instruction is breakpoint instruction.
* @insn: instruction to be checked.
* Default implementation of is_trap_insn
* Returns true if @insn is a breakpoint instruction.
*
* This function is needed for the case where an architecture has multiple
* trap instructions (like powerpc).
*/
bool __weak is_trap_insn(uprobe_opcode_t *insn)
{
return is_swbp_insn(insn);
}
static void copy_from_page(struct page *page, unsigned long vaddr, void *dst, int len)
{
void *kaddr = kmap_atomic(page);
memcpy(dst, kaddr + (vaddr & ~PAGE_MASK), len);
kunmap_atomic(kaddr);
}
static void copy_to_page(struct page *page, unsigned long vaddr, const void *src, int len)
{
void *kaddr = kmap_atomic(page);
memcpy(kaddr + (vaddr & ~PAGE_MASK), src, len);
kunmap_atomic(kaddr);
}
static int verify_opcode(struct page *page, unsigned long vaddr, uprobe_opcode_t *new_opcode)
{
uprobe_opcode_t old_opcode;
bool is_swbp;
/*
* Note: We only check if the old_opcode is UPROBE_SWBP_INSN here.
* We do not check if it is any other 'trap variant' which could
* be conditional trap instruction such as the one powerpc supports.
*
* The logic is that we do not care if the underlying instruction
* is a trap variant; uprobes always wins over any other (gdb)
* breakpoint.
*/
copy_from_page(page, vaddr, &old_opcode, UPROBE_SWBP_INSN_SIZE);
is_swbp = is_swbp_insn(&old_opcode);
if (is_swbp_insn(new_opcode)) {
if (is_swbp) /* register: already installed? */
return 0;
} else {
if (!is_swbp) /* unregister: was it changed by us? */
return 0;
}
return 1;
}
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
/*
* NOTE:
* Expect the breakpoint instruction to be the smallest size instruction for
* the architecture. If an arch has variable length instruction and the
* breakpoint instruction is not of the smallest length instruction
* supported by that architecture then we need to modify is_trap_at_addr and
* uprobe_write_opcode accordingly. This would never be a problem for archs
* that have fixed length instructions.
*
* uprobe_write_opcode - write the opcode at a given virtual address.
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
* @mm: the probed process address space.
* @vaddr: the virtual address to store the opcode.
* @opcode: opcode to be written at @vaddr.
*
* Called with mm->mmap_sem held for write.
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
* Return 0 (success) or a negative errno.
*/
int uprobe_write_opcode(struct mm_struct *mm, unsigned long vaddr,
uprobe_opcode_t opcode)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
{
struct page *old_page, *new_page;
struct vm_area_struct *vma;
int ret;
retry:
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
/* Read the page with vaddr into memory */
ret = get_user_pages(NULL, mm, vaddr, 1, 0, 1, &old_page, &vma);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
if (ret <= 0)
return ret;
ret = verify_opcode(old_page, vaddr, &opcode);
if (ret <= 0)
goto put_old;
ret = anon_vma_prepare(vma);
if (ret)
goto put_old;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
ret = -ENOMEM;
new_page = alloc_page_vma(GFP_HIGHUSER_MOVABLE, vma, vaddr);
if (!new_page)
goto put_old;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
__SetPageUptodate(new_page);
copy_highpage(new_page, old_page);
copy_to_page(new_page, vaddr, &opcode, UPROBE_SWBP_INSN_SIZE);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
ret = __replace_page(vma, vaddr, old_page, new_page);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
page_cache_release(new_page);
put_old:
put_page(old_page);
if (unlikely(ret == -EAGAIN))
goto retry;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
return ret;
}
/**
* set_swbp - store breakpoint at a given address.
* @auprobe: arch specific probepoint information.
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
* @mm: the probed process address space.
* @vaddr: the virtual address to insert the opcode.
*
* For mm @mm, store the breakpoint instruction at @vaddr.
* Return 0 (success) or a negative errno.
*/
int __weak set_swbp(struct arch_uprobe *auprobe, struct mm_struct *mm, unsigned long vaddr)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
{
return uprobe_write_opcode(mm, vaddr, UPROBE_SWBP_INSN);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
}
/**
* set_orig_insn - Restore the original instruction.
* @mm: the probed process address space.
* @auprobe: arch specific probepoint information.
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
* @vaddr: the virtual address to insert the opcode.
*
* For mm @mm, restore the original opcode (opcode) at @vaddr.
* Return 0 (success) or a negative errno.
*/
int __weak
set_orig_insn(struct arch_uprobe *auprobe, struct mm_struct *mm, unsigned long vaddr)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
{
return uprobe_write_opcode(mm, vaddr, *(uprobe_opcode_t *)&auprobe->insn);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
}
static struct uprobe *get_uprobe(struct uprobe *uprobe)
{
atomic_inc(&uprobe->ref);
return uprobe;
}
static void put_uprobe(struct uprobe *uprobe)
{
if (atomic_dec_and_test(&uprobe->ref))
kfree(uprobe);
}
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
static int match_uprobe(struct uprobe *l, struct uprobe *r)
{
if (l->inode < r->inode)
return -1;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
if (l->inode > r->inode)
return 1;
if (l->offset < r->offset)
return -1;
if (l->offset > r->offset)
return 1;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
return 0;
}
static struct uprobe *__find_uprobe(struct inode *inode, loff_t offset)
{
struct uprobe u = { .inode = inode, .offset = offset };
struct rb_node *n = uprobes_tree.rb_node;
struct uprobe *uprobe;
int match;
while (n) {
uprobe = rb_entry(n, struct uprobe, rb_node);
match = match_uprobe(&u, uprobe);
if (!match)
return get_uprobe(uprobe);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
if (match < 0)
n = n->rb_left;
else
n = n->rb_right;
}
return NULL;
}
/*
* Find a uprobe corresponding to a given inode:offset
* Acquires uprobes_treelock
*/
static struct uprobe *find_uprobe(struct inode *inode, loff_t offset)
{
struct uprobe *uprobe;
spin_lock(&uprobes_treelock);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
uprobe = __find_uprobe(inode, offset);
spin_unlock(&uprobes_treelock);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
return uprobe;
}
static struct uprobe *__insert_uprobe(struct uprobe *uprobe)
{
struct rb_node **p = &uprobes_tree.rb_node;
struct rb_node *parent = NULL;
struct uprobe *u;
int match;
while (*p) {
parent = *p;
u = rb_entry(parent, struct uprobe, rb_node);
match = match_uprobe(uprobe, u);
if (!match)
return get_uprobe(u);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
if (match < 0)
p = &parent->rb_left;
else
p = &parent->rb_right;
}
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
u = NULL;
rb_link_node(&uprobe->rb_node, parent, p);
rb_insert_color(&uprobe->rb_node, &uprobes_tree);
/* get access + creation ref */
atomic_set(&uprobe->ref, 2);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
return u;
}
/*
* Acquire uprobes_treelock.
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
* Matching uprobe already exists in rbtree;
* increment (access refcount) and return the matching uprobe.
*
* No matching uprobe; insert the uprobe in rb_tree;
* get a double refcount (access + creation) and return NULL.
*/
static struct uprobe *insert_uprobe(struct uprobe *uprobe)
{
struct uprobe *u;
spin_lock(&uprobes_treelock);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
u = __insert_uprobe(uprobe);
spin_unlock(&uprobes_treelock);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
return u;
}
static struct uprobe *alloc_uprobe(struct inode *inode, loff_t offset)
{
struct uprobe *uprobe, *cur_uprobe;
uprobe = kzalloc(sizeof(struct uprobe), GFP_KERNEL);
if (!uprobe)
return NULL;
uprobe->inode = igrab(inode);
uprobe->offset = offset;
init_rwsem(&uprobe->register_rwsem);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
init_rwsem(&uprobe->consumer_rwsem);
/* add to uprobes_tree, sorted on inode:offset */
cur_uprobe = insert_uprobe(uprobe);
/* a uprobe exists for this inode:offset combination */
if (cur_uprobe) {
kfree(uprobe);
uprobe = cur_uprobe;
iput(inode);
}
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
return uprobe;
}
static void consumer_add(struct uprobe *uprobe, struct uprobe_consumer *uc)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
{
down_write(&uprobe->consumer_rwsem);
uc->next = uprobe->consumers;
uprobe->consumers = uc;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
up_write(&uprobe->consumer_rwsem);
}
/*
* For uprobe @uprobe, delete the consumer @uc.
* Return true if the @uc is deleted successfully
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
* or return false.
*/
static bool consumer_del(struct uprobe *uprobe, struct uprobe_consumer *uc)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
{
struct uprobe_consumer **con;
bool ret = false;
down_write(&uprobe->consumer_rwsem);
for (con = &uprobe->consumers; *con; con = &(*con)->next) {
if (*con == uc) {
*con = uc->next;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
ret = true;
break;
}
}
up_write(&uprobe->consumer_rwsem);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
return ret;
}
static int __copy_insn(struct address_space *mapping, struct file *filp,
void *insn, int nbytes, loff_t offset)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
{
struct page *page;
/*
* Ensure that the page that has the original instruction is populated
* and in page-cache. If ->readpage == NULL it must be shmem_mapping(),
* see uprobe_register().
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
*/
if (mapping->a_ops->readpage)
page = read_mapping_page(mapping, offset >> PAGE_CACHE_SHIFT, filp);
else
page = shmem_read_mapping_page(mapping, offset >> PAGE_CACHE_SHIFT);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
if (IS_ERR(page))
return PTR_ERR(page);
copy_from_page(page, offset, insn, nbytes);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
page_cache_release(page);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
return 0;
}
static int copy_insn(struct uprobe *uprobe, struct file *filp)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
{
struct address_space *mapping = uprobe->inode->i_mapping;
loff_t offs = uprobe->offset;
void *insn = &uprobe->arch.insn;
int size = sizeof(uprobe->arch.insn);
int len, err = -EIO;
/* Copy only available bytes, -EIO if nothing was read */
do {
if (offs >= i_size_read(uprobe->inode))
break;
len = min_t(int, size, PAGE_SIZE - (offs & ~PAGE_MASK));
err = __copy_insn(mapping, filp, insn, len, offs);
if (err)
break;
insn += len;
offs += len;
size -= len;
} while (size);
return err;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
}
static int prepare_uprobe(struct uprobe *uprobe, struct file *file,
struct mm_struct *mm, unsigned long vaddr)
{
int ret = 0;
if (test_bit(UPROBE_COPY_INSN, &uprobe->flags))
return ret;
/* TODO: move this into _register, until then we abuse this sem. */
down_write(&uprobe->consumer_rwsem);
if (test_bit(UPROBE_COPY_INSN, &uprobe->flags))
goto out;
ret = copy_insn(uprobe, file);
if (ret)
goto out;
ret = -ENOTSUPP;
if (is_trap_insn((uprobe_opcode_t *)&uprobe->arch.insn))
goto out;
ret = arch_uprobe_analyze_insn(&uprobe->arch, mm, vaddr);
if (ret)
goto out;
/* uprobe_write_opcode() assumes we don't cross page boundary */
BUG_ON((uprobe->offset & ~PAGE_MASK) +
UPROBE_SWBP_INSN_SIZE > PAGE_SIZE);
smp_wmb(); /* pairs with rmb() in find_active_uprobe() */
set_bit(UPROBE_COPY_INSN, &uprobe->flags);
out:
up_write(&uprobe->consumer_rwsem);
return ret;
}
static inline bool consumer_filter(struct uprobe_consumer *uc,
enum uprobe_filter_ctx ctx, struct mm_struct *mm)
{
return !uc->filter || uc->filter(uc, ctx, mm);
}
static bool filter_chain(struct uprobe *uprobe,
enum uprobe_filter_ctx ctx, struct mm_struct *mm)
{
struct uprobe_consumer *uc;
bool ret = false;
down_read(&uprobe->consumer_rwsem);
for (uc = uprobe->consumers; uc; uc = uc->next) {
ret = consumer_filter(uc, ctx, mm);
if (ret)
break;
}
up_read(&uprobe->consumer_rwsem);
return ret;
}
static int
install_breakpoint(struct uprobe *uprobe, struct mm_struct *mm,
struct vm_area_struct *vma, unsigned long vaddr)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
{
bool first_uprobe;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
int ret;
ret = prepare_uprobe(uprobe, vma->vm_file, mm, vaddr);
if (ret)
return ret;
uprobes/core: Optimize probe hits with the help of a counter Maintain a per-mm counter: number of uprobes that are inserted on this process address space. This counter can be used at probe hit time to determine if we need a lookup in the uprobes rbtree. Everytime a probe gets inserted successfully, the probe count is incremented and everytime a probe gets removed, the probe count is decremented. The new uprobe_munmap hook ensures the count is correct on a unmap or remap of a region. We expect that once a uprobe_munmap() is called, the vma goes away. So uprobe_unregister() finding a probe to unregister would either mean unmap event hasnt occurred yet or a mmap event on the same executable file occured after a unmap event. Additionally, uprobe_mmap hook now also gets called: a. on every executable vma that is COWed at fork. b. a vma of interest is newly mapped; breakpoint insertion also happens at the required address. On process creation, make sure the probes count in the child is set correctly. Special cases that are taken care include: a. mremap b. VM_DONTCOPY vmas on fork() c. insertion/removal races in the parent during fork(). Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182646.10018.85805.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-30 12:26:46 -06:00
/*
* set MMF_HAS_UPROBES in advance for uprobe_pre_sstep_notifier(),
* the task can hit this breakpoint right after __replace_page().
*/
first_uprobe = !test_bit(MMF_HAS_UPROBES, &mm->flags);
if (first_uprobe)
set_bit(MMF_HAS_UPROBES, &mm->flags);
ret = set_swbp(&uprobe->arch, mm, vaddr);
if (!ret)
clear_bit(MMF_RECALC_UPROBES, &mm->flags);
else if (first_uprobe)
clear_bit(MMF_HAS_UPROBES, &mm->flags);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
return ret;
}
static int
remove_breakpoint(struct uprobe *uprobe, struct mm_struct *mm, unsigned long vaddr)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
{
set_bit(MMF_RECALC_UPROBES, &mm->flags);
return set_orig_insn(&uprobe->arch, mm, vaddr);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
}
static inline bool uprobe_is_active(struct uprobe *uprobe)
{
return !RB_EMPTY_NODE(&uprobe->rb_node);
}
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-13 12:00:11 -06:00
/*
* There could be threads that have already hit the breakpoint. They
* will recheck the current insn and restart if find_uprobe() fails.
* See find_active_uprobe().
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-13 12:00:11 -06:00
*/
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
static void delete_uprobe(struct uprobe *uprobe)
{
if (WARN_ON(!uprobe_is_active(uprobe)))
return;
spin_lock(&uprobes_treelock);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
rb_erase(&uprobe->rb_node, &uprobes_tree);
spin_unlock(&uprobes_treelock);
RB_CLEAR_NODE(&uprobe->rb_node); /* for uprobe_is_active() */
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
iput(uprobe->inode);
put_uprobe(uprobe);
}
struct map_info {
struct map_info *next;
struct mm_struct *mm;
unsigned long vaddr;
};
static inline struct map_info *free_map_info(struct map_info *info)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
{
struct map_info *next = info->next;
kfree(info);
return next;
}
static struct map_info *
build_map_info(struct address_space *mapping, loff_t offset, bool is_register)
{
unsigned long pgoff = offset >> PAGE_SHIFT;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
struct vm_area_struct *vma;
struct map_info *curr = NULL;
struct map_info *prev = NULL;
struct map_info *info;
int more = 0;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
again:
i_mmap_lock_read(mapping);
vma_interval_tree_foreach(vma, &mapping->i_mmap, pgoff, pgoff) {
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
if (!valid_vma(vma, is_register))
continue;
if (!prev && !more) {
/*
* Needs GFP_NOWAIT to avoid i_mmap_rwsem recursion through
* reclaim. This is optimistic, no harm done if it fails.
*/
prev = kmalloc(sizeof(struct map_info),
GFP_NOWAIT | __GFP_NOMEMALLOC | __GFP_NOWARN);
if (prev)
prev->next = NULL;
}
if (!prev) {
more++;
continue;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
}
if (!atomic_inc_not_zero(&vma->vm_mm->mm_users))
continue;
info = prev;
prev = prev->next;
info->next = curr;
curr = info;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
info->mm = vma->vm_mm;
info->vaddr = offset_to_vaddr(vma, offset);
}
i_mmap_unlock_read(mapping);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
if (!more)
goto out;
prev = curr;
while (curr) {
mmput(curr->mm);
curr = curr->next;
}
do {
info = kmalloc(sizeof(struct map_info), GFP_KERNEL);
if (!info) {
curr = ERR_PTR(-ENOMEM);
goto out;
}
info->next = prev;
prev = info;
} while (--more);
goto again;
out:
while (prev)
prev = free_map_info(prev);
return curr;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
}
static int
register_for_each_vma(struct uprobe *uprobe, struct uprobe_consumer *new)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
{
bool is_register = !!new;
struct map_info *info;
int err = 0;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
percpu_down_write(&dup_mmap_sem);
info = build_map_info(uprobe->inode->i_mapping,
uprobe->offset, is_register);
if (IS_ERR(info)) {
err = PTR_ERR(info);
goto out;
}
while (info) {
struct mm_struct *mm = info->mm;
struct vm_area_struct *vma;
if (err && is_register)
goto free;
down_write(&mm->mmap_sem);
vma = find_vma(mm, info->vaddr);
if (!vma || !valid_vma(vma, is_register) ||
file_inode(vma->vm_file) != uprobe->inode)
goto unlock;
if (vma->vm_start > info->vaddr ||
vaddr_to_offset(vma, info->vaddr) != uprobe->offset)
goto unlock;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
if (is_register) {
/* consult only the "caller", new consumer. */
if (consumer_filter(new,
UPROBE_FILTER_REGISTER, mm))
err = install_breakpoint(uprobe, mm, vma, info->vaddr);
} else if (test_bit(MMF_HAS_UPROBES, &mm->flags)) {
if (!filter_chain(uprobe,
UPROBE_FILTER_UNREGISTER, mm))
err |= remove_breakpoint(uprobe, mm, info->vaddr);
}
unlock:
up_write(&mm->mmap_sem);
free:
mmput(mm);
info = free_map_info(info);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
}
out:
percpu_up_write(&dup_mmap_sem);
return err;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
}
static int __uprobe_register(struct uprobe *uprobe, struct uprobe_consumer *uc)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
{
consumer_add(uprobe, uc);
return register_for_each_vma(uprobe, uc);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
}
static void __uprobe_unregister(struct uprobe *uprobe, struct uprobe_consumer *uc)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
{
int err;
if (WARN_ON(!consumer_del(uprobe, uc)))
return;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
err = register_for_each_vma(uprobe, NULL);
/* TODO : cant unregister? schedule a worker thread */
if (!uprobe->consumers && !err)
delete_uprobe(uprobe);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
}
/*
* uprobe_register - register a probe
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
* @inode: the file in which the probe has to be placed.
* @offset: offset from the start of the file.
* @uc: information on howto handle the probe..
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
*
* Apart from the access refcount, uprobe_register() takes a creation
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
* refcount (thro alloc_uprobe) if and only if this @uprobe is getting
* inserted into the rbtree (i.e first consumer for a @inode:@offset
* tuple). Creation refcount stops uprobe_unregister from freeing the
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
* @uprobe even before the register operation is complete. Creation
* refcount is released when the last @uc for the @uprobe
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
* unregisters.
*
* Return errno if it cannot successully install probes
* else return 0 (success)
*/
int uprobe_register(struct inode *inode, loff_t offset, struct uprobe_consumer *uc)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
{
struct uprobe *uprobe;
int ret;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
/* Uprobe must have at least one set consumer */
if (!uc->handler && !uc->ret_handler)
return -EINVAL;
/* copy_insn() uses read_mapping_page() or shmem_read_mapping_page() */
if (!inode->i_mapping->a_ops->readpage && !shmem_mapping(inode->i_mapping))
return -EIO;
/* Racy, just to catch the obvious mistakes */
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
if (offset > i_size_read(inode))
return -EINVAL;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
retry:
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
uprobe = alloc_uprobe(inode, offset);
if (!uprobe)
return -ENOMEM;
/*
* We can race with uprobe_unregister()->delete_uprobe().
* Check uprobe_is_active() and retry if it is false.
*/
down_write(&uprobe->register_rwsem);
ret = -EAGAIN;
if (likely(uprobe_is_active(uprobe))) {
ret = __uprobe_register(uprobe, uc);
if (ret)
__uprobe_unregister(uprobe, uc);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
}
up_write(&uprobe->register_rwsem);
put_uprobe(uprobe);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
if (unlikely(ret == -EAGAIN))
goto retry;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
return ret;
}
EXPORT_SYMBOL_GPL(uprobe_register);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
/*
* uprobe_apply - unregister a already registered probe.
* @inode: the file in which the probe has to be removed.
* @offset: offset from the start of the file.
* @uc: consumer which wants to add more or remove some breakpoints
* @add: add or remove the breakpoints
*/
int uprobe_apply(struct inode *inode, loff_t offset,
struct uprobe_consumer *uc, bool add)
{
struct uprobe *uprobe;
struct uprobe_consumer *con;
int ret = -ENOENT;
uprobe = find_uprobe(inode, offset);
if (WARN_ON(!uprobe))
return ret;
down_write(&uprobe->register_rwsem);
for (con = uprobe->consumers; con && con != uc ; con = con->next)
;
if (con)
ret = register_for_each_vma(uprobe, add ? uc : NULL);
up_write(&uprobe->register_rwsem);
put_uprobe(uprobe);
return ret;
}
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
/*
* uprobe_unregister - unregister a already registered probe.
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
* @inode: the file in which the probe has to be removed.
* @offset: offset from the start of the file.
* @uc: identify which probe if multiple probes are colocated.
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
*/
void uprobe_unregister(struct inode *inode, loff_t offset, struct uprobe_consumer *uc)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
{
struct uprobe *uprobe;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
uprobe = find_uprobe(inode, offset);
if (WARN_ON(!uprobe))
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
return;
down_write(&uprobe->register_rwsem);
__uprobe_unregister(uprobe, uc);
up_write(&uprobe->register_rwsem);
put_uprobe(uprobe);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
}
EXPORT_SYMBOL_GPL(uprobe_unregister);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
static int unapply_uprobe(struct uprobe *uprobe, struct mm_struct *mm)
{
struct vm_area_struct *vma;
int err = 0;
down_read(&mm->mmap_sem);
for (vma = mm->mmap; vma; vma = vma->vm_next) {
unsigned long vaddr;
loff_t offset;
if (!valid_vma(vma, false) ||
file_inode(vma->vm_file) != uprobe->inode)
continue;
offset = (loff_t)vma->vm_pgoff << PAGE_SHIFT;
if (uprobe->offset < offset ||
uprobe->offset >= offset + vma->vm_end - vma->vm_start)
continue;
vaddr = offset_to_vaddr(vma, uprobe->offset);
err |= remove_breakpoint(uprobe, mm, vaddr);
}
up_read(&mm->mmap_sem);
return err;
}
static struct rb_node *
find_node_in_range(struct inode *inode, loff_t min, loff_t max)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
{
struct rb_node *n = uprobes_tree.rb_node;
while (n) {
struct uprobe *u = rb_entry(n, struct uprobe, rb_node);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
if (inode < u->inode) {
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
n = n->rb_left;
} else if (inode > u->inode) {
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
n = n->rb_right;
} else {
if (max < u->offset)
n = n->rb_left;
else if (min > u->offset)
n = n->rb_right;
else
break;
}
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
}
return n;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
}
/*
* For a given range in vma, build a list of probes that need to be inserted.
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
*/
static void build_probe_list(struct inode *inode,
struct vm_area_struct *vma,
unsigned long start, unsigned long end,
struct list_head *head)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
{
loff_t min, max;
struct rb_node *n, *t;
struct uprobe *u;
INIT_LIST_HEAD(head);
min = vaddr_to_offset(vma, start);
max = min + (end - start) - 1;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
spin_lock(&uprobes_treelock);
n = find_node_in_range(inode, min, max);
if (n) {
for (t = n; t; t = rb_prev(t)) {
u = rb_entry(t, struct uprobe, rb_node);
if (u->inode != inode || u->offset < min)
break;
list_add(&u->pending_list, head);
get_uprobe(u);
}
for (t = n; (t = rb_next(t)); ) {
u = rb_entry(t, struct uprobe, rb_node);
if (u->inode != inode || u->offset > max)
break;
list_add(&u->pending_list, head);
get_uprobe(u);
}
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
}
spin_unlock(&uprobes_treelock);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
}
/*
* Called from mmap_region/vma_adjust with mm->mmap_sem acquired.
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
*
* Currently we ignore all errors and always return 0, the callers
* can't handle the failure anyway.
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
*/
int uprobe_mmap(struct vm_area_struct *vma)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
{
struct list_head tmp_list;
struct uprobe *uprobe, *u;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
struct inode *inode;
if (no_uprobe_events() || !valid_vma(vma, true))
return 0;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
inode = file_inode(vma->vm_file);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
if (!inode)
return 0;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
mutex_lock(uprobes_mmap_hash(inode));
build_probe_list(inode, vma, vma->vm_start, vma->vm_end, &tmp_list);
/*
* We can race with uprobe_unregister(), this uprobe can be already
* removed. But in this case filter_chain() must return false, all
* consumers have gone away.
*/
list_for_each_entry_safe(uprobe, u, &tmp_list, pending_list) {
if (!fatal_signal_pending(current) &&
filter_chain(uprobe, UPROBE_FILTER_MMAP, vma->vm_mm)) {
unsigned long vaddr = offset_to_vaddr(vma, uprobe->offset);
install_breakpoint(uprobe, vma->vm_mm, vma, vaddr);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
}
put_uprobe(uprobe);
}
mutex_unlock(uprobes_mmap_hash(inode));
return 0;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
}
static bool
vma_has_uprobes(struct vm_area_struct *vma, unsigned long start, unsigned long end)
{
loff_t min, max;
struct inode *inode;
struct rb_node *n;
inode = file_inode(vma->vm_file);
min = vaddr_to_offset(vma, start);
max = min + (end - start) - 1;
spin_lock(&uprobes_treelock);
n = find_node_in_range(inode, min, max);
spin_unlock(&uprobes_treelock);
return !!n;
}
uprobes/core: Optimize probe hits with the help of a counter Maintain a per-mm counter: number of uprobes that are inserted on this process address space. This counter can be used at probe hit time to determine if we need a lookup in the uprobes rbtree. Everytime a probe gets inserted successfully, the probe count is incremented and everytime a probe gets removed, the probe count is decremented. The new uprobe_munmap hook ensures the count is correct on a unmap or remap of a region. We expect that once a uprobe_munmap() is called, the vma goes away. So uprobe_unregister() finding a probe to unregister would either mean unmap event hasnt occurred yet or a mmap event on the same executable file occured after a unmap event. Additionally, uprobe_mmap hook now also gets called: a. on every executable vma that is COWed at fork. b. a vma of interest is newly mapped; breakpoint insertion also happens at the required address. On process creation, make sure the probes count in the child is set correctly. Special cases that are taken care include: a. mremap b. VM_DONTCOPY vmas on fork() c. insertion/removal races in the parent during fork(). Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182646.10018.85805.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-30 12:26:46 -06:00
/*
* Called in context of a munmap of a vma.
*/
uprobes/core: Decrement uprobe count before the pages are unmapped Uprobes has a callback (uprobe_munmap()) in the unmap path to maintain the uprobes count. In the exit path this callback gets called in unlink_file_vma(). However by the time unlink_file_vma() is called, the pages would have been unmapped (in unmap_vmas()) and the task->rss_stat counts accounted (in zap_pte_range()). If the exiting process has probepoints, uprobe_munmap() checks if the breakpoint instruction was around before decrementing the probe count. This results in a file backed page being reread by uprobe_munmap() and hence it does not find the breakpoint. This patch fixes this problem by moving the callback to unmap_single_vma(). Since unmap_single_vma() may not unmap the complete vma, add start and end parameters to uprobe_munmap(). This bug became apparent courtesy of commit c3f0327f8e9d ("mm: add rss counters consistency check"). Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120411103527.23245.9835.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-04-11 04:35:27 -06:00
void uprobe_munmap(struct vm_area_struct *vma, unsigned long start, unsigned long end)
uprobes/core: Optimize probe hits with the help of a counter Maintain a per-mm counter: number of uprobes that are inserted on this process address space. This counter can be used at probe hit time to determine if we need a lookup in the uprobes rbtree. Everytime a probe gets inserted successfully, the probe count is incremented and everytime a probe gets removed, the probe count is decremented. The new uprobe_munmap hook ensures the count is correct on a unmap or remap of a region. We expect that once a uprobe_munmap() is called, the vma goes away. So uprobe_unregister() finding a probe to unregister would either mean unmap event hasnt occurred yet or a mmap event on the same executable file occured after a unmap event. Additionally, uprobe_mmap hook now also gets called: a. on every executable vma that is COWed at fork. b. a vma of interest is newly mapped; breakpoint insertion also happens at the required address. On process creation, make sure the probes count in the child is set correctly. Special cases that are taken care include: a. mremap b. VM_DONTCOPY vmas on fork() c. insertion/removal races in the parent during fork(). Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182646.10018.85805.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-30 12:26:46 -06:00
{
if (no_uprobe_events() || !valid_vma(vma, false))
uprobes/core: Optimize probe hits with the help of a counter Maintain a per-mm counter: number of uprobes that are inserted on this process address space. This counter can be used at probe hit time to determine if we need a lookup in the uprobes rbtree. Everytime a probe gets inserted successfully, the probe count is incremented and everytime a probe gets removed, the probe count is decremented. The new uprobe_munmap hook ensures the count is correct on a unmap or remap of a region. We expect that once a uprobe_munmap() is called, the vma goes away. So uprobe_unregister() finding a probe to unregister would either mean unmap event hasnt occurred yet or a mmap event on the same executable file occured after a unmap event. Additionally, uprobe_mmap hook now also gets called: a. on every executable vma that is COWed at fork. b. a vma of interest is newly mapped; breakpoint insertion also happens at the required address. On process creation, make sure the probes count in the child is set correctly. Special cases that are taken care include: a. mremap b. VM_DONTCOPY vmas on fork() c. insertion/removal races in the parent during fork(). Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182646.10018.85805.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-30 12:26:46 -06:00
return;
if (!atomic_read(&vma->vm_mm->mm_users)) /* called by mmput() ? */
return;
if (!test_bit(MMF_HAS_UPROBES, &vma->vm_mm->flags) ||
test_bit(MMF_RECALC_UPROBES, &vma->vm_mm->flags))
return;
if (vma_has_uprobes(vma, start, end))
set_bit(MMF_RECALC_UPROBES, &vma->vm_mm->flags);
uprobes/core: Optimize probe hits with the help of a counter Maintain a per-mm counter: number of uprobes that are inserted on this process address space. This counter can be used at probe hit time to determine if we need a lookup in the uprobes rbtree. Everytime a probe gets inserted successfully, the probe count is incremented and everytime a probe gets removed, the probe count is decremented. The new uprobe_munmap hook ensures the count is correct on a unmap or remap of a region. We expect that once a uprobe_munmap() is called, the vma goes away. So uprobe_unregister() finding a probe to unregister would either mean unmap event hasnt occurred yet or a mmap event on the same executable file occured after a unmap event. Additionally, uprobe_mmap hook now also gets called: a. on every executable vma that is COWed at fork. b. a vma of interest is newly mapped; breakpoint insertion also happens at the required address. On process creation, make sure the probes count in the child is set correctly. Special cases that are taken care include: a. mremap b. VM_DONTCOPY vmas on fork() c. insertion/removal races in the parent during fork(). Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182646.10018.85805.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-30 12:26:46 -06:00
}
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-30 12:26:31 -06:00
/* Slot allocation for XOL */
static int xol_add_vma(struct mm_struct *mm, struct xol_area *area)
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-30 12:26:31 -06:00
{
struct vm_area_struct *vma;
int ret;
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-30 12:26:31 -06:00
down_write(&mm->mmap_sem);
if (mm->uprobes_state.xol_area) {
ret = -EALREADY;
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-30 12:26:31 -06:00
goto fail;
}
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-30 12:26:31 -06:00
if (!area->vaddr) {
/* Try to map as high as possible, this is only a hint. */
area->vaddr = get_unmapped_area(NULL, TASK_SIZE - PAGE_SIZE,
PAGE_SIZE, 0, 0);
if (area->vaddr & ~PAGE_MASK) {
ret = area->vaddr;
goto fail;
}
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-30 12:26:31 -06:00
}
vma = _install_special_mapping(mm, area->vaddr, PAGE_SIZE,
VM_EXEC|VM_MAYEXEC|VM_DONTCOPY|VM_IO,
&area->xol_mapping);
if (IS_ERR(vma)) {
ret = PTR_ERR(vma);
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-30 12:26:31 -06:00
goto fail;
}
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-30 12:26:31 -06:00
ret = 0;
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-30 12:26:31 -06:00
smp_wmb(); /* pairs with get_xol_area() */
mm->uprobes_state.xol_area = area;
fail:
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-30 12:26:31 -06:00
up_write(&mm->mmap_sem);
return ret;
}
static struct xol_area *__create_xol_area(unsigned long vaddr)
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-30 12:26:31 -06:00
{
struct mm_struct *mm = current->mm;
uprobe_opcode_t insn = UPROBE_SWBP_INSN;
struct xol_area *area;
area = kmalloc(sizeof(*area), GFP_KERNEL);
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-30 12:26:31 -06:00
if (unlikely(!area))
goto out;
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-30 12:26:31 -06:00
area->bitmap = kzalloc(BITS_TO_LONGS(UINSNS_PER_PAGE) * sizeof(long), GFP_KERNEL);
if (!area->bitmap)
goto free_area;
area->xol_mapping.name = "[uprobes]";
area->xol_mapping.pages = area->pages;
area->pages[0] = alloc_page(GFP_HIGHUSER);
if (!area->pages[0])
goto free_bitmap;
area->pages[1] = NULL;
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-30 12:26:31 -06:00
area->vaddr = vaddr;
init_waitqueue_head(&area->wq);
/* Reserve the 1st slot for get_trampoline_vaddr() */
set_bit(0, area->bitmap);
atomic_set(&area->slot_count, 1);
copy_to_page(area->pages[0], 0, &insn, UPROBE_SWBP_INSN_SIZE);
if (!xol_add_vma(mm, area))
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-30 12:26:31 -06:00
return area;
__free_page(area->pages[0]);
free_bitmap:
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-30 12:26:31 -06:00
kfree(area->bitmap);
free_area:
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-30 12:26:31 -06:00
kfree(area);
out:
return NULL;
}
/*
* get_xol_area - Allocate process's xol_area if necessary.
* This area will be used for storing instructions for execution out of line.
*
* Returns the allocated area or NULL.
*/
static struct xol_area *get_xol_area(void)
{
struct mm_struct *mm = current->mm;
struct xol_area *area;
if (!mm->uprobes_state.xol_area)
__create_xol_area(0);
area = mm->uprobes_state.xol_area;
smp_read_barrier_depends(); /* pairs with wmb in xol_add_vma() */
return area;
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-30 12:26:31 -06:00
}
/*
* uprobe_clear_state - Free the area allocated for slots.
*/
void uprobe_clear_state(struct mm_struct *mm)
{
struct xol_area *area = mm->uprobes_state.xol_area;
if (!area)
return;
put_page(area->pages[0]);
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-30 12:26:31 -06:00
kfree(area->bitmap);
kfree(area);
}
void uprobe_start_dup_mmap(void)
{
percpu_down_read(&dup_mmap_sem);
}
void uprobe_end_dup_mmap(void)
{
percpu_up_read(&dup_mmap_sem);
}
void uprobe_dup_mmap(struct mm_struct *oldmm, struct mm_struct *newmm)
{
newmm->uprobes_state.xol_area = NULL;
if (test_bit(MMF_HAS_UPROBES, &oldmm->flags)) {
set_bit(MMF_HAS_UPROBES, &newmm->flags);
/* unconditionally, dup_mmap() skips VM_DONTCOPY vmas */
set_bit(MMF_RECALC_UPROBES, &newmm->flags);
}
}
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-30 12:26:31 -06:00
/*
* - search for a free slot.
*/
static unsigned long xol_take_insn_slot(struct xol_area *area)
{
unsigned long slot_addr;
int slot_nr;
do {
slot_nr = find_first_zero_bit(area->bitmap, UINSNS_PER_PAGE);
if (slot_nr < UINSNS_PER_PAGE) {
if (!test_and_set_bit(slot_nr, area->bitmap))
break;
slot_nr = UINSNS_PER_PAGE;
continue;
}
wait_event(area->wq, (atomic_read(&area->slot_count) < UINSNS_PER_PAGE));
} while (slot_nr >= UINSNS_PER_PAGE);
slot_addr = area->vaddr + (slot_nr * UPROBE_XOL_SLOT_BYTES);
atomic_inc(&area->slot_count);
return slot_addr;
}
/*
* xol_get_insn_slot - allocate a slot for xol.
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-30 12:26:31 -06:00
* Returns the allocated slot address or 0.
*/
static unsigned long xol_get_insn_slot(struct uprobe *uprobe)
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-30 12:26:31 -06:00
{
struct xol_area *area;
unsigned long xol_vaddr;
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-30 12:26:31 -06:00
area = get_xol_area();
if (!area)
return 0;
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-30 12:26:31 -06:00
xol_vaddr = xol_take_insn_slot(area);
if (unlikely(!xol_vaddr))
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-30 12:26:31 -06:00
return 0;
arch_uprobe_copy_ixol(area->pages[0], xol_vaddr,
2014-04-28 21:20:52 -06:00
&uprobe->arch.ixol, sizeof(uprobe->arch.ixol));
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-30 12:26:31 -06:00
return xol_vaddr;
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-30 12:26:31 -06:00
}
/*
* xol_free_insn_slot - If slot was earlier allocated by
* @xol_get_insn_slot(), make the slot available for
* subsequent requests.
*/
static void xol_free_insn_slot(struct task_struct *tsk)
{
struct xol_area *area;
unsigned long vma_end;
unsigned long slot_addr;
if (!tsk->mm || !tsk->mm->uprobes_state.xol_area || !tsk->utask)
return;
slot_addr = tsk->utask->xol_vaddr;
if (unlikely(!slot_addr))
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-30 12:26:31 -06:00
return;
area = tsk->mm->uprobes_state.xol_area;
vma_end = area->vaddr + PAGE_SIZE;
if (area->vaddr <= slot_addr && slot_addr < vma_end) {
unsigned long offset;
int slot_nr;
offset = slot_addr - area->vaddr;
slot_nr = offset / UPROBE_XOL_SLOT_BYTES;
if (slot_nr >= UINSNS_PER_PAGE)
return;
clear_bit(slot_nr, area->bitmap);
atomic_dec(&area->slot_count);
smp_mb__after_atomic(); /* pairs with prepare_to_wait() */
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-30 12:26:31 -06:00
if (waitqueue_active(&area->wq))
wake_up(&area->wq);
tsk->utask->xol_vaddr = 0;
}
}
2014-04-28 21:20:52 -06:00
void __weak arch_uprobe_copy_ixol(struct page *page, unsigned long vaddr,
void *src, unsigned long len)
{
/* Initialize the slot */
copy_to_page(page, vaddr, src, len);
/*
* We probably need flush_icache_user_range() but it needs vma.
* This should work on most of architectures by default. If
* architecture needs to do something different it can define
* its own version of the function.
*/
flush_dcache_page(page);
}
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-13 12:00:11 -06:00
/**
* uprobe_get_swbp_addr - compute address of swbp given post-swbp regs
* @regs: Reflects the saved state of the task after it has hit a breakpoint
* instruction.
* Return the address of the breakpoint instruction.
*/
unsigned long __weak uprobe_get_swbp_addr(struct pt_regs *regs)
{
return instruction_pointer(regs) - UPROBE_SWBP_INSN_SIZE;
}
unsigned long uprobe_get_trap_addr(struct pt_regs *regs)
{
struct uprobe_task *utask = current->utask;
if (unlikely(utask && utask->active_uprobe))
return utask->vaddr;
return instruction_pointer(regs);
}
static struct return_instance *free_ret_instance(struct return_instance *ri)
{
struct return_instance *next = ri->next;
put_uprobe(ri->uprobe);
kfree(ri);
return next;
}
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-13 12:00:11 -06:00
/*
* Called with no locks held.
* Called in context of a exiting or a exec-ing thread.
*/
void uprobe_free_utask(struct task_struct *t)
{
struct uprobe_task *utask = t->utask;
struct return_instance *ri;
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-13 12:00:11 -06:00
if (!utask)
return;
if (utask->active_uprobe)
put_uprobe(utask->active_uprobe);
ri = utask->return_instances;
while (ri)
ri = free_ret_instance(ri);
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-30 12:26:31 -06:00
xol_free_insn_slot(t);
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-13 12:00:11 -06:00
kfree(utask);
t->utask = NULL;
}
/*
* Allocate a uprobe_task object for the task if if necessary.
* Called when the thread hits a breakpoint.
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-13 12:00:11 -06:00
*
* Returns:
* - pointer to new uprobe_task on success
* - NULL otherwise
*/
static struct uprobe_task *get_utask(void)
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-13 12:00:11 -06:00
{
if (!current->utask)
current->utask = kzalloc(sizeof(struct uprobe_task), GFP_KERNEL);
return current->utask;
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-13 12:00:11 -06:00
}
static int dup_utask(struct task_struct *t, struct uprobe_task *o_utask)
{
struct uprobe_task *n_utask;
struct return_instance **p, *o, *n;
n_utask = kzalloc(sizeof(struct uprobe_task), GFP_KERNEL);
if (!n_utask)
return -ENOMEM;
t->utask = n_utask;
p = &n_utask->return_instances;
for (o = o_utask->return_instances; o; o = o->next) {
n = kmalloc(sizeof(struct return_instance), GFP_KERNEL);
if (!n)
return -ENOMEM;
*n = *o;
get_uprobe(n->uprobe);
n->next = NULL;
*p = n;
p = &n->next;
n_utask->depth++;
}
return 0;
}
static void uprobe_warn(struct task_struct *t, const char *msg)
{
pr_warn("uprobe: %s:%d failed to %s\n",
current->comm, current->pid, msg);
}
uprobes: Change uprobe_copy_process() to dup xol_area This finally fixes the serious bug in uretprobes: a forked child crashes if the parent called fork() with the pending ret probe. Trivial test-case: # perf probe -x /lib/libc.so.6 __fork%return # perf record -e probe_libc:__fork perl -le 'fork || print "OK"' (the child doesn't print "OK", it is killed by SIGSEGV) If the child returns from the probed function it actually returns to trampoline_vaddr, because it got the copy of parent's stack mangled by prepare_uretprobe() when the parent entered this func. It crashes because a) this address is not mapped and b) until the previous change it doesn't have the proper->return_instances info. This means that uprobe_copy_process() has to create xol_area which has the trampoline slot, and its vaddr should be equal to parent's xol_area->vaddr. Unfortunately, uprobe_copy_process() can not simply do __create_xol_area(child, xol_area->vaddr). This could actually work but perf_event_mmap() doesn't expect the usage of foreign ->mm. So we offload this to task_work_run(), and pass the argument via not yet used utask->vaddr. We know that this vaddr is fine for install_special_mapping(), the necessary hole was recently "created" by dup_mmap() which skips the parent's VM_DONTCOPY area, and nobody else could use the new mm. Unfortunately, this also means that we can not handle the errors properly, we obviously can not abort the already completed fork(). So we simply print the warning if GFP_KERNEL allocation (the only possible reason) fails. Reported-by: Martin Cermak <mcermak@redhat.com> Reported-by: David Smith <dsmith@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2013-10-13 13:18:44 -06:00
static void dup_xol_work(struct callback_head *work)
{
if (current->flags & PF_EXITING)
return;
uprobes: Add uprobe_task->dup_xol_work/dup_xol_addr uprobe_task->vaddr is a bit strange. The generic code uses it only to pass the additional argument to arch_uprobe_pre_xol(), and since it is always equal to instruction_pointer() this looks even more strange. And both utask->vaddr and and utask->autask have the same scope, they only have the meaning when the task executes the probed insn out-of-line, so it is safe to reuse both in UTASK_RUNNING state. This all means that logically ->vaddr belongs to arch_uprobe_task and we should probably move it there, arch_uprobe_pre_xol() can record instruction_pointer() itself. OTOH, it is also used by uprobe_copy_process() and dup_xol_work() for another purpose, this doesn't look clean and doesn't allow to move this member into arch_uprobe_task. This patch adds the union with 2 anonymous structs into uprobe_task. The first struct is autask + vaddr, this way we "almost" move vaddr into autask. The second struct has 2 new members for uprobe_copy_process() paths: ->dup_xol_addr which can be used instead ->vaddr, and ->dup_xol_work which can be used to avoid kmalloc() and simplify the code. Note that this union will likely have another member(s), we need something like "private_data_for_handlers" so that the tracing handlers could use it to communicate with call_fetch() methods. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2013-11-08 10:52:21 -07:00
if (!__create_xol_area(current->utask->dup_xol_addr))
uprobes: Change uprobe_copy_process() to dup xol_area This finally fixes the serious bug in uretprobes: a forked child crashes if the parent called fork() with the pending ret probe. Trivial test-case: # perf probe -x /lib/libc.so.6 __fork%return # perf record -e probe_libc:__fork perl -le 'fork || print "OK"' (the child doesn't print "OK", it is killed by SIGSEGV) If the child returns from the probed function it actually returns to trampoline_vaddr, because it got the copy of parent's stack mangled by prepare_uretprobe() when the parent entered this func. It crashes because a) this address is not mapped and b) until the previous change it doesn't have the proper->return_instances info. This means that uprobe_copy_process() has to create xol_area which has the trampoline slot, and its vaddr should be equal to parent's xol_area->vaddr. Unfortunately, uprobe_copy_process() can not simply do __create_xol_area(child, xol_area->vaddr). This could actually work but perf_event_mmap() doesn't expect the usage of foreign ->mm. So we offload this to task_work_run(), and pass the argument via not yet used utask->vaddr. We know that this vaddr is fine for install_special_mapping(), the necessary hole was recently "created" by dup_mmap() which skips the parent's VM_DONTCOPY area, and nobody else could use the new mm. Unfortunately, this also means that we can not handle the errors properly, we obviously can not abort the already completed fork(). So we simply print the warning if GFP_KERNEL allocation (the only possible reason) fails. Reported-by: Martin Cermak <mcermak@redhat.com> Reported-by: David Smith <dsmith@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2013-10-13 13:18:44 -06:00
uprobe_warn(current, "dup xol area");
}
/*
* Called in context of a new clone/fork from copy_process.
*/
void uprobe_copy_process(struct task_struct *t, unsigned long flags)
{
struct uprobe_task *utask = current->utask;
struct mm_struct *mm = current->mm;
uprobes: Change uprobe_copy_process() to dup xol_area This finally fixes the serious bug in uretprobes: a forked child crashes if the parent called fork() with the pending ret probe. Trivial test-case: # perf probe -x /lib/libc.so.6 __fork%return # perf record -e probe_libc:__fork perl -le 'fork || print "OK"' (the child doesn't print "OK", it is killed by SIGSEGV) If the child returns from the probed function it actually returns to trampoline_vaddr, because it got the copy of parent's stack mangled by prepare_uretprobe() when the parent entered this func. It crashes because a) this address is not mapped and b) until the previous change it doesn't have the proper->return_instances info. This means that uprobe_copy_process() has to create xol_area which has the trampoline slot, and its vaddr should be equal to parent's xol_area->vaddr. Unfortunately, uprobe_copy_process() can not simply do __create_xol_area(child, xol_area->vaddr). This could actually work but perf_event_mmap() doesn't expect the usage of foreign ->mm. So we offload this to task_work_run(), and pass the argument via not yet used utask->vaddr. We know that this vaddr is fine for install_special_mapping(), the necessary hole was recently "created" by dup_mmap() which skips the parent's VM_DONTCOPY area, and nobody else could use the new mm. Unfortunately, this also means that we can not handle the errors properly, we obviously can not abort the already completed fork(). So we simply print the warning if GFP_KERNEL allocation (the only possible reason) fails. Reported-by: Martin Cermak <mcermak@redhat.com> Reported-by: David Smith <dsmith@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2013-10-13 13:18:44 -06:00
struct xol_area *area;
t->utask = NULL;
if (!utask || !utask->return_instances)
return;
if (mm == t->mm && !(flags & CLONE_VFORK))
return;
if (dup_utask(t, utask))
return uprobe_warn(t, "dup ret instances");
uprobes: Change uprobe_copy_process() to dup xol_area This finally fixes the serious bug in uretprobes: a forked child crashes if the parent called fork() with the pending ret probe. Trivial test-case: # perf probe -x /lib/libc.so.6 __fork%return # perf record -e probe_libc:__fork perl -le 'fork || print "OK"' (the child doesn't print "OK", it is killed by SIGSEGV) If the child returns from the probed function it actually returns to trampoline_vaddr, because it got the copy of parent's stack mangled by prepare_uretprobe() when the parent entered this func. It crashes because a) this address is not mapped and b) until the previous change it doesn't have the proper->return_instances info. This means that uprobe_copy_process() has to create xol_area which has the trampoline slot, and its vaddr should be equal to parent's xol_area->vaddr. Unfortunately, uprobe_copy_process() can not simply do __create_xol_area(child, xol_area->vaddr). This could actually work but perf_event_mmap() doesn't expect the usage of foreign ->mm. So we offload this to task_work_run(), and pass the argument via not yet used utask->vaddr. We know that this vaddr is fine for install_special_mapping(), the necessary hole was recently "created" by dup_mmap() which skips the parent's VM_DONTCOPY area, and nobody else could use the new mm. Unfortunately, this also means that we can not handle the errors properly, we obviously can not abort the already completed fork(). So we simply print the warning if GFP_KERNEL allocation (the only possible reason) fails. Reported-by: Martin Cermak <mcermak@redhat.com> Reported-by: David Smith <dsmith@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2013-10-13 13:18:44 -06:00
/* The task can fork() after dup_xol_work() fails */
area = mm->uprobes_state.xol_area;
if (!area)
return uprobe_warn(t, "dup xol area");
if (mm == t->mm)
return;
uprobes: Add uprobe_task->dup_xol_work/dup_xol_addr uprobe_task->vaddr is a bit strange. The generic code uses it only to pass the additional argument to arch_uprobe_pre_xol(), and since it is always equal to instruction_pointer() this looks even more strange. And both utask->vaddr and and utask->autask have the same scope, they only have the meaning when the task executes the probed insn out-of-line, so it is safe to reuse both in UTASK_RUNNING state. This all means that logically ->vaddr belongs to arch_uprobe_task and we should probably move it there, arch_uprobe_pre_xol() can record instruction_pointer() itself. OTOH, it is also used by uprobe_copy_process() and dup_xol_work() for another purpose, this doesn't look clean and doesn't allow to move this member into arch_uprobe_task. This patch adds the union with 2 anonymous structs into uprobe_task. The first struct is autask + vaddr, this way we "almost" move vaddr into autask. The second struct has 2 new members for uprobe_copy_process() paths: ->dup_xol_addr which can be used instead ->vaddr, and ->dup_xol_work which can be used to avoid kmalloc() and simplify the code. Note that this union will likely have another member(s), we need something like "private_data_for_handlers" so that the tracing handlers could use it to communicate with call_fetch() methods. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2013-11-08 10:52:21 -07:00
t->utask->dup_xol_addr = area->vaddr;
init_task_work(&t->utask->dup_xol_work, dup_xol_work);
task_work_add(t, &t->utask->dup_xol_work, true);
}
/*
* Current area->vaddr notion assume the trampoline address is always
* equal area->vaddr.
*
* Returns -1 in case the xol_area is not allocated.
*/
static unsigned long get_trampoline_vaddr(void)
{
struct xol_area *area;
unsigned long trampoline_vaddr = -1;
area = current->mm->uprobes_state.xol_area;
smp_read_barrier_depends();
if (area)
trampoline_vaddr = area->vaddr;
return trampoline_vaddr;
}
uprobes/x86: Make arch_uretprobe_is_alive(RP_CHECK_CALL) more clever The previous change documents that cleanup_return_instances() can't always detect the dead frames, the stack can grow. But there is one special case which imho worth fixing: arch_uretprobe_is_alive() can return true when the stack didn't actually grow, but the next "call" insn uses the already invalidated frame. Test-case: #include <stdio.h> #include <setjmp.h> jmp_buf jmp; int nr = 1024; void func_2(void) { if (--nr == 0) return; longjmp(jmp, 1); } void func_1(void) { setjmp(jmp); func_2(); } int main(void) { func_1(); return 0; } If you ret-probe func_1() and func_2() prepare_uretprobe() hits the MAX_URETPROBE_DEPTH limit and "return" from func_2() is not reported. When we know that the new call is not chained, we can do the more strict check. In this case "sp" points to the new ret-addr, so every frame which uses the same "sp" must be dead. The only complication is that arch_uretprobe_is_alive() needs to know was it chained or not, so we add the new RP_CHECK_CHAIN_CALL enum and change prepare_uretprobe() to pass RP_CHECK_CALL only if !chained. Note: arch_uretprobe_is_alive() could also re-read *sp and check if this word is still trampoline_vaddr. This could obviously improve the logic, but I would like to avoid another copy_from_user() especially in the case when we can't avoid the false "alive == T" positives. Tested-by: Pratyush Anand <panand@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: Anton Arapov <arapov@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20150721134028.GA4786@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-21 07:40:28 -06:00
static void cleanup_return_instances(struct uprobe_task *utask, bool chained,
struct pt_regs *regs)
{
struct return_instance *ri = utask->return_instances;
uprobes/x86: Make arch_uretprobe_is_alive(RP_CHECK_CALL) more clever The previous change documents that cleanup_return_instances() can't always detect the dead frames, the stack can grow. But there is one special case which imho worth fixing: arch_uretprobe_is_alive() can return true when the stack didn't actually grow, but the next "call" insn uses the already invalidated frame. Test-case: #include <stdio.h> #include <setjmp.h> jmp_buf jmp; int nr = 1024; void func_2(void) { if (--nr == 0) return; longjmp(jmp, 1); } void func_1(void) { setjmp(jmp); func_2(); } int main(void) { func_1(); return 0; } If you ret-probe func_1() and func_2() prepare_uretprobe() hits the MAX_URETPROBE_DEPTH limit and "return" from func_2() is not reported. When we know that the new call is not chained, we can do the more strict check. In this case "sp" points to the new ret-addr, so every frame which uses the same "sp" must be dead. The only complication is that arch_uretprobe_is_alive() needs to know was it chained or not, so we add the new RP_CHECK_CHAIN_CALL enum and change prepare_uretprobe() to pass RP_CHECK_CALL only if !chained. Note: arch_uretprobe_is_alive() could also re-read *sp and check if this word is still trampoline_vaddr. This could obviously improve the logic, but I would like to avoid another copy_from_user() especially in the case when we can't avoid the false "alive == T" positives. Tested-by: Pratyush Anand <panand@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: Anton Arapov <arapov@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20150721134028.GA4786@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-21 07:40:28 -06:00
enum rp_check ctx = chained ? RP_CHECK_CHAIN_CALL : RP_CHECK_CALL;
while (ri && !arch_uretprobe_is_alive(ri, ctx, regs)) {
ri = free_ret_instance(ri);
utask->depth--;
}
utask->return_instances = ri;
}
static void prepare_uretprobe(struct uprobe *uprobe, struct pt_regs *regs)
{
struct return_instance *ri;
struct uprobe_task *utask;
unsigned long orig_ret_vaddr, trampoline_vaddr;
uprobes/x86: Make arch_uretprobe_is_alive(RP_CHECK_CALL) more clever The previous change documents that cleanup_return_instances() can't always detect the dead frames, the stack can grow. But there is one special case which imho worth fixing: arch_uretprobe_is_alive() can return true when the stack didn't actually grow, but the next "call" insn uses the already invalidated frame. Test-case: #include <stdio.h> #include <setjmp.h> jmp_buf jmp; int nr = 1024; void func_2(void) { if (--nr == 0) return; longjmp(jmp, 1); } void func_1(void) { setjmp(jmp); func_2(); } int main(void) { func_1(); return 0; } If you ret-probe func_1() and func_2() prepare_uretprobe() hits the MAX_URETPROBE_DEPTH limit and "return" from func_2() is not reported. When we know that the new call is not chained, we can do the more strict check. In this case "sp" points to the new ret-addr, so every frame which uses the same "sp" must be dead. The only complication is that arch_uretprobe_is_alive() needs to know was it chained or not, so we add the new RP_CHECK_CHAIN_CALL enum and change prepare_uretprobe() to pass RP_CHECK_CALL only if !chained. Note: arch_uretprobe_is_alive() could also re-read *sp and check if this word is still trampoline_vaddr. This could obviously improve the logic, but I would like to avoid another copy_from_user() especially in the case when we can't avoid the false "alive == T" positives. Tested-by: Pratyush Anand <panand@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: Anton Arapov <arapov@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20150721134028.GA4786@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-21 07:40:28 -06:00
bool chained;
if (!get_xol_area())
return;
utask = get_utask();
if (!utask)
return;
if (utask->depth >= MAX_URETPROBE_DEPTH) {
printk_ratelimited(KERN_INFO "uprobe: omit uretprobe due to"
" nestedness limit pid/tgid=%d/%d\n",
current->pid, current->tgid);
return;
}
ri = kmalloc(sizeof(struct return_instance), GFP_KERNEL);
if (!ri)
return;
trampoline_vaddr = get_trampoline_vaddr();
orig_ret_vaddr = arch_uretprobe_hijack_return_addr(trampoline_vaddr, regs);
if (orig_ret_vaddr == -1)
goto fail;
/* drop the entries invalidated by longjmp() */
uprobes/x86: Make arch_uretprobe_is_alive(RP_CHECK_CALL) more clever The previous change documents that cleanup_return_instances() can't always detect the dead frames, the stack can grow. But there is one special case which imho worth fixing: arch_uretprobe_is_alive() can return true when the stack didn't actually grow, but the next "call" insn uses the already invalidated frame. Test-case: #include <stdio.h> #include <setjmp.h> jmp_buf jmp; int nr = 1024; void func_2(void) { if (--nr == 0) return; longjmp(jmp, 1); } void func_1(void) { setjmp(jmp); func_2(); } int main(void) { func_1(); return 0; } If you ret-probe func_1() and func_2() prepare_uretprobe() hits the MAX_URETPROBE_DEPTH limit and "return" from func_2() is not reported. When we know that the new call is not chained, we can do the more strict check. In this case "sp" points to the new ret-addr, so every frame which uses the same "sp" must be dead. The only complication is that arch_uretprobe_is_alive() needs to know was it chained or not, so we add the new RP_CHECK_CHAIN_CALL enum and change prepare_uretprobe() to pass RP_CHECK_CALL only if !chained. Note: arch_uretprobe_is_alive() could also re-read *sp and check if this word is still trampoline_vaddr. This could obviously improve the logic, but I would like to avoid another copy_from_user() especially in the case when we can't avoid the false "alive == T" positives. Tested-by: Pratyush Anand <panand@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: Anton Arapov <arapov@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20150721134028.GA4786@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-21 07:40:28 -06:00
chained = (orig_ret_vaddr == trampoline_vaddr);
cleanup_return_instances(utask, chained, regs);
/*
* We don't want to keep trampoline address in stack, rather keep the
* original return address of first caller thru all the consequent
* instances. This also makes breakpoint unwrapping easier.
*/
uprobes/x86: Make arch_uretprobe_is_alive(RP_CHECK_CALL) more clever The previous change documents that cleanup_return_instances() can't always detect the dead frames, the stack can grow. But there is one special case which imho worth fixing: arch_uretprobe_is_alive() can return true when the stack didn't actually grow, but the next "call" insn uses the already invalidated frame. Test-case: #include <stdio.h> #include <setjmp.h> jmp_buf jmp; int nr = 1024; void func_2(void) { if (--nr == 0) return; longjmp(jmp, 1); } void func_1(void) { setjmp(jmp); func_2(); } int main(void) { func_1(); return 0; } If you ret-probe func_1() and func_2() prepare_uretprobe() hits the MAX_URETPROBE_DEPTH limit and "return" from func_2() is not reported. When we know that the new call is not chained, we can do the more strict check. In this case "sp" points to the new ret-addr, so every frame which uses the same "sp" must be dead. The only complication is that arch_uretprobe_is_alive() needs to know was it chained or not, so we add the new RP_CHECK_CHAIN_CALL enum and change prepare_uretprobe() to pass RP_CHECK_CALL only if !chained. Note: arch_uretprobe_is_alive() could also re-read *sp and check if this word is still trampoline_vaddr. This could obviously improve the logic, but I would like to avoid another copy_from_user() especially in the case when we can't avoid the false "alive == T" positives. Tested-by: Pratyush Anand <panand@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: Anton Arapov <arapov@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20150721134028.GA4786@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-21 07:40:28 -06:00
if (chained) {
if (!utask->return_instances) {
/*
* This situation is not possible. Likely we have an
* attack from user-space.
*/
uprobe_warn(current, "handle tail call");
goto fail;
}
orig_ret_vaddr = utask->return_instances->orig_ret_vaddr;
}
ri->uprobe = get_uprobe(uprobe);
ri->func = instruction_pointer(regs);
ri->stack = user_stack_pointer(regs);
ri->orig_ret_vaddr = orig_ret_vaddr;
ri->chained = chained;
utask->depth++;
ri->next = utask->return_instances;
utask->return_instances = ri;
return;
fail:
kfree(ri);
}
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-13 12:00:11 -06:00
/* Prepare to single-step probed instruction out of line. */
static int
pre_ssout(struct uprobe *uprobe, struct pt_regs *regs, unsigned long bp_vaddr)
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-13 12:00:11 -06:00
{
struct uprobe_task *utask;
unsigned long xol_vaddr;
int err;
utask = get_utask();
if (!utask)
return -ENOMEM;
xol_vaddr = xol_get_insn_slot(uprobe);
if (!xol_vaddr)
return -ENOMEM;
utask->xol_vaddr = xol_vaddr;
utask->vaddr = bp_vaddr;
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-30 12:26:31 -06:00
err = arch_uprobe_pre_xol(&uprobe->arch, regs);
if (unlikely(err)) {
xol_free_insn_slot(current);
return err;
}
utask->active_uprobe = uprobe;
utask->state = UTASK_SSTEP;
return 0;
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-13 12:00:11 -06:00
}
/*
* If we are singlestepping, then ensure this thread is not connected to
* non-fatal signals until completion of singlestep. When xol insn itself
* triggers the signal, restart the original insn even if the task is
* already SIGKILL'ed (since coredump should report the correct ip). This
* is even more important if the task has a handler for SIGSEGV/etc, The
* _same_ instruction should be repeated again after return from the signal
* handler, and SSTEP can never finish in this case.
*/
bool uprobe_deny_signal(void)
{
struct task_struct *t = current;
struct uprobe_task *utask = t->utask;
if (likely(!utask || !utask->active_uprobe))
return false;
WARN_ON_ONCE(utask->state != UTASK_SSTEP);
if (signal_pending(t)) {
spin_lock_irq(&t->sighand->siglock);
clear_tsk_thread_flag(t, TIF_SIGPENDING);
spin_unlock_irq(&t->sighand->siglock);
if (__fatal_signal_pending(t) || arch_uprobe_xol_was_trapped(t)) {
utask->state = UTASK_SSTEP_TRAPPED;
set_tsk_thread_flag(t, TIF_UPROBE);
}
}
return true;
}
static void mmf_recalc_uprobes(struct mm_struct *mm)
{
struct vm_area_struct *vma;
for (vma = mm->mmap; vma; vma = vma->vm_next) {
if (!valid_vma(vma, false))
continue;
/*
* This is not strictly accurate, we can race with
* uprobe_unregister() and see the already removed
* uprobe if delete_uprobe() was not yet called.
* Or this uprobe can be filtered out.
*/
if (vma_has_uprobes(vma, vma->vm_start, vma->vm_end))
return;
}
clear_bit(MMF_HAS_UPROBES, &mm->flags);
}
static int is_trap_at_addr(struct mm_struct *mm, unsigned long vaddr)
{
struct page *page;
uprobe_opcode_t opcode;
int result;
pagefault_disable();
result = __copy_from_user_inatomic(&opcode, (void __user*)vaddr,
sizeof(opcode));
pagefault_enable();
if (likely(result == 0))
goto out;
result = get_user_pages(NULL, mm, vaddr, 1, 0, 1, &page, NULL);
if (result < 0)
return result;
copy_from_page(page, vaddr, &opcode, UPROBE_SWBP_INSN_SIZE);
put_page(page);
out:
/* This needs to return true for any variant of the trap insn */
return is_trap_insn(&opcode);
}
uprobes: Teach find_active_uprobe() to provide the "is_swbp" info A separate patch to simplify the review, and for the documentation. The patch adds another "int *is_swbp" argument to find_active_uprobe(), so far its only caller doesn't use this info. With this patch find_active_uprobe() additionally does: - if find_vma() + ->vm_start check fails, *is_swbp = -EFAULT - otherwise, if valid_vma() + find_uprobe() fails, it holds the result of is_swbp_at_addr(), can be negative too. The latter is only possible if we raced with another thread which did munmap/etc after we hit this bp. IOW. If find_active_uprobe(&is_swbp) returns NULL, the caller can look at is_swbp to figure out whether the current insn is bp or not, or detect the race with another thread if it is negative. Note: I think that performance-wise this change is fine. This adds is_swbp_at_addr(), but only if we raced with uprobe_unregister() or if we hit the "normal" int3 but this mm has uprobes as well. And even in this case the slow read_opcode() path is very unlikely, this insn recently triggered do_int3(), __copy_from_user_inatomic() shouldn't fail in the likely case. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anton Arapov <anton@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120529192914.GD8057@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-29 13:29:14 -06:00
static struct uprobe *find_active_uprobe(unsigned long bp_vaddr, int *is_swbp)
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-13 12:00:11 -06:00
{
struct mm_struct *mm = current->mm;
struct uprobe *uprobe = NULL;
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-13 12:00:11 -06:00
struct vm_area_struct *vma;
down_read(&mm->mmap_sem);
vma = find_vma(mm, bp_vaddr);
if (vma && vma->vm_start <= bp_vaddr) {
if (valid_vma(vma, false)) {
struct inode *inode = file_inode(vma->vm_file);
loff_t offset = vaddr_to_offset(vma, bp_vaddr);
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-13 12:00:11 -06:00
uprobe = find_uprobe(inode, offset);
}
uprobes: Teach find_active_uprobe() to provide the "is_swbp" info A separate patch to simplify the review, and for the documentation. The patch adds another "int *is_swbp" argument to find_active_uprobe(), so far its only caller doesn't use this info. With this patch find_active_uprobe() additionally does: - if find_vma() + ->vm_start check fails, *is_swbp = -EFAULT - otherwise, if valid_vma() + find_uprobe() fails, it holds the result of is_swbp_at_addr(), can be negative too. The latter is only possible if we raced with another thread which did munmap/etc after we hit this bp. IOW. If find_active_uprobe(&is_swbp) returns NULL, the caller can look at is_swbp to figure out whether the current insn is bp or not, or detect the race with another thread if it is negative. Note: I think that performance-wise this change is fine. This adds is_swbp_at_addr(), but only if we raced with uprobe_unregister() or if we hit the "normal" int3 but this mm has uprobes as well. And even in this case the slow read_opcode() path is very unlikely, this insn recently triggered do_int3(), __copy_from_user_inatomic() shouldn't fail in the likely case. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anton Arapov <anton@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120529192914.GD8057@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-29 13:29:14 -06:00
if (!uprobe)
*is_swbp = is_trap_at_addr(mm, bp_vaddr);
uprobes: Teach find_active_uprobe() to provide the "is_swbp" info A separate patch to simplify the review, and for the documentation. The patch adds another "int *is_swbp" argument to find_active_uprobe(), so far its only caller doesn't use this info. With this patch find_active_uprobe() additionally does: - if find_vma() + ->vm_start check fails, *is_swbp = -EFAULT - otherwise, if valid_vma() + find_uprobe() fails, it holds the result of is_swbp_at_addr(), can be negative too. The latter is only possible if we raced with another thread which did munmap/etc after we hit this bp. IOW. If find_active_uprobe(&is_swbp) returns NULL, the caller can look at is_swbp to figure out whether the current insn is bp or not, or detect the race with another thread if it is negative. Note: I think that performance-wise this change is fine. This adds is_swbp_at_addr(), but only if we raced with uprobe_unregister() or if we hit the "normal" int3 but this mm has uprobes as well. And even in this case the slow read_opcode() path is very unlikely, this insn recently triggered do_int3(), __copy_from_user_inatomic() shouldn't fail in the likely case. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anton Arapov <anton@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120529192914.GD8057@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-29 13:29:14 -06:00
} else {
*is_swbp = -EFAULT;
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-13 12:00:11 -06:00
}
if (!uprobe && test_and_clear_bit(MMF_RECALC_UPROBES, &mm->flags))
mmf_recalc_uprobes(mm);
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-13 12:00:11 -06:00
up_read(&mm->mmap_sem);
return uprobe;
}
static void handler_chain(struct uprobe *uprobe, struct pt_regs *regs)
{
struct uprobe_consumer *uc;
int remove = UPROBE_HANDLER_REMOVE;
bool need_prep = false; /* prepare return uprobe, when needed */
down_read(&uprobe->register_rwsem);
for (uc = uprobe->consumers; uc; uc = uc->next) {
int rc = 0;
if (uc->handler) {
rc = uc->handler(uc, regs);
WARN(rc & ~UPROBE_HANDLER_MASK,
"bad rc=0x%x from %pf()\n", rc, uc->handler);
}
if (uc->ret_handler)
need_prep = true;
remove &= rc;
}
if (need_prep && !remove)
prepare_uretprobe(uprobe, regs); /* put bp at return */
if (remove && uprobe->consumers) {
WARN_ON(!uprobe_is_active(uprobe));
unapply_uprobe(uprobe, current->mm);
}
up_read(&uprobe->register_rwsem);
}
static void
handle_uretprobe_chain(struct return_instance *ri, struct pt_regs *regs)
{
struct uprobe *uprobe = ri->uprobe;
struct uprobe_consumer *uc;
down_read(&uprobe->register_rwsem);
for (uc = uprobe->consumers; uc; uc = uc->next) {
if (uc->ret_handler)
uc->ret_handler(uc, ri->func, regs);
}
up_read(&uprobe->register_rwsem);
}
static struct return_instance *find_next_ret_chain(struct return_instance *ri)
{
bool chained;
do {
chained = ri->chained;
ri = ri->next; /* can't be NULL if chained */
} while (chained);
return ri;
}
static void handle_trampoline(struct pt_regs *regs)
{
struct uprobe_task *utask;
struct return_instance *ri, *next;
uprobes: Change handle_trampoline() to flush the frames invalidated by longjmp() Test-case: #include <stdio.h> #include <setjmp.h> jmp_buf jmp; void func_2(void) { longjmp(jmp, 1); } void func_1(void) { if (setjmp(jmp)) return; func_2(); printf("ERR!! I am running on the caller's stack\n"); } int main(void) { func_1(); return 0; } fails if you probe func_1() and func_2() because handle_trampoline() assumes that the probed function should must return and hit the bp installed be prepare_uretprobe(). But in this case func_2() does not return, so when func_1() returns the kernel uses the no longer valid return_instance of func_2(). Change handle_trampoline() to unwind ->return_instances until we know that the next chain is alive or NULL, this ensures that the current chain is the last we need to report and free. Alternatively, every return_instance could use unique trampoline_vaddr, in this case we could use it as a key. And this could solve the problem with sigaltstack() automatically. But this approach needs more changes, and it puts the "hard" limit on MAX_URETPROBE_DEPTH. Plus it can not solve another problem partially fixed by the next patch. Note: this change has no effect on !x86, the arch-agnostic version of arch_uretprobe_is_alive() just returns "true". TODO: as documented by the previous change, arch_uretprobe_is_alive() can be fooled by sigaltstack/etc. Tested-by: Pratyush Anand <panand@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: Anton Arapov <arapov@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20150721134021.GA4773@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-21 07:40:21 -06:00
bool valid;
utask = current->utask;
if (!utask)
goto sigill;
ri = utask->return_instances;
if (!ri)
goto sigill;
do {
uprobes: Change handle_trampoline() to flush the frames invalidated by longjmp() Test-case: #include <stdio.h> #include <setjmp.h> jmp_buf jmp; void func_2(void) { longjmp(jmp, 1); } void func_1(void) { if (setjmp(jmp)) return; func_2(); printf("ERR!! I am running on the caller's stack\n"); } int main(void) { func_1(); return 0; } fails if you probe func_1() and func_2() because handle_trampoline() assumes that the probed function should must return and hit the bp installed be prepare_uretprobe(). But in this case func_2() does not return, so when func_1() returns the kernel uses the no longer valid return_instance of func_2(). Change handle_trampoline() to unwind ->return_instances until we know that the next chain is alive or NULL, this ensures that the current chain is the last we need to report and free. Alternatively, every return_instance could use unique trampoline_vaddr, in this case we could use it as a key. And this could solve the problem with sigaltstack() automatically. But this approach needs more changes, and it puts the "hard" limit on MAX_URETPROBE_DEPTH. Plus it can not solve another problem partially fixed by the next patch. Note: this change has no effect on !x86, the arch-agnostic version of arch_uretprobe_is_alive() just returns "true". TODO: as documented by the previous change, arch_uretprobe_is_alive() can be fooled by sigaltstack/etc. Tested-by: Pratyush Anand <panand@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: Anton Arapov <arapov@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20150721134021.GA4773@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-21 07:40:21 -06:00
/*
* We should throw out the frames invalidated by longjmp().
* If this chain is valid, then the next one should be alive
* or NULL; the latter case means that nobody but ri->func
* could hit this trampoline on return. TODO: sigaltstack().
*/
next = find_next_ret_chain(ri);
valid = !next || arch_uretprobe_is_alive(next, RP_CHECK_RET, regs);
uprobes: Change handle_trampoline() to flush the frames invalidated by longjmp() Test-case: #include <stdio.h> #include <setjmp.h> jmp_buf jmp; void func_2(void) { longjmp(jmp, 1); } void func_1(void) { if (setjmp(jmp)) return; func_2(); printf("ERR!! I am running on the caller's stack\n"); } int main(void) { func_1(); return 0; } fails if you probe func_1() and func_2() because handle_trampoline() assumes that the probed function should must return and hit the bp installed be prepare_uretprobe(). But in this case func_2() does not return, so when func_1() returns the kernel uses the no longer valid return_instance of func_2(). Change handle_trampoline() to unwind ->return_instances until we know that the next chain is alive or NULL, this ensures that the current chain is the last we need to report and free. Alternatively, every return_instance could use unique trampoline_vaddr, in this case we could use it as a key. And this could solve the problem with sigaltstack() automatically. But this approach needs more changes, and it puts the "hard" limit on MAX_URETPROBE_DEPTH. Plus it can not solve another problem partially fixed by the next patch. Note: this change has no effect on !x86, the arch-agnostic version of arch_uretprobe_is_alive() just returns "true". TODO: as documented by the previous change, arch_uretprobe_is_alive() can be fooled by sigaltstack/etc. Tested-by: Pratyush Anand <panand@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: Anton Arapov <arapov@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20150721134021.GA4773@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-21 07:40:21 -06:00
instruction_pointer_set(regs, ri->orig_ret_vaddr);
do {
if (valid)
handle_uretprobe_chain(ri, regs);
ri = free_ret_instance(ri);
utask->depth--;
} while (ri != next);
} while (!valid);
utask->return_instances = ri;
return;
sigill:
uprobe_warn(current, "handle uretprobe, sending SIGILL.");
force_sig_info(SIGILL, SEND_SIG_FORCED, current);
}
bool __weak arch_uprobe_ignore(struct arch_uprobe *aup, struct pt_regs *regs)
{
return false;
}
bool __weak arch_uretprobe_is_alive(struct return_instance *ret, enum rp_check ctx,
struct pt_regs *regs)
{
return true;
}
/*
* Run handler and ask thread to singlestep.
* Ensure all non-fatal signals cannot interrupt thread while it singlesteps.
*/
static void handle_swbp(struct pt_regs *regs)
{
struct uprobe *uprobe;
unsigned long bp_vaddr;
int uninitialized_var(is_swbp);
bp_vaddr = uprobe_get_swbp_addr(regs);
if (bp_vaddr == get_trampoline_vaddr())
return handle_trampoline(regs);
uprobe = find_active_uprobe(bp_vaddr, &is_swbp);
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-13 12:00:11 -06:00
if (!uprobe) {
if (is_swbp > 0) {
/* No matching uprobe; signal SIGTRAP. */
send_sig(SIGTRAP, current, 0);
} else {
/*
* Either we raced with uprobe_unregister() or we can't
* access this memory. The latter is only possible if
* another thread plays with our ->mm. In both cases
* we can simply restart. If this vma was unmapped we
* can pretend this insn was not executed yet and get
* the (correct) SIGSEGV after restart.
*/
instruction_pointer_set(regs, bp_vaddr);
}
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-13 12:00:11 -06:00
return;
}
/* change it in advance for ->handler() and restart */
instruction_pointer_set(regs, bp_vaddr);
/*
* TODO: move copy_insn/etc into _register and remove this hack.
* After we hit the bp, _unregister + _register can install the
* new and not-yet-analyzed uprobe at the same address, restart.
*/
smp_rmb(); /* pairs with wmb() in install_breakpoint() */
if (unlikely(!test_bit(UPROBE_COPY_INSN, &uprobe->flags)))
goto out;
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-13 12:00:11 -06:00
/* Tracing handlers use ->utask to communicate with fetch methods */
if (!get_utask())
goto out;
if (arch_uprobe_ignore(&uprobe->arch, regs))
goto out;
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-13 12:00:11 -06:00
handler_chain(uprobe, regs);
uprobes: Kill UPROBE_SKIP_SSTEP and can_skip_sstep() UPROBE_COPY_INSN, UPROBE_SKIP_SSTEP, and uprobe->flags must die. This patch kills UPROBE_SKIP_SSTEP. I never understood why it was added; not only it doesn't help, it harms. It can only help to avoid arch_uprobe_skip_sstep() if it was already called before and failed. But this is ugly, if we want to know whether we can emulate this instruction or not we should do this analysis in arch_uprobe_analyze_insn(), not when we hit this probe for the first time. And in fact this logic is simply wrong. arch_uprobe_skip_sstep() can fail or not depending on the task/register state, if this insn can be emulated but, say, put_user() fails we need to xol it this time, but this doesn't mean we shouldn't try to emulate it when this or another thread hits this bp next time. And this is the actual reason for this change. We need to emulate the "call" insn, but push(return-address) can obviously fail. Per-arch notes: x86: __skip_sstep() can only emulate "rep;nop". With this change it will be called every time and most probably for no reason. This will be fixed by the next changes. We need to change this suboptimal code anyway. arm: Should not be affected. It has its own "bool simulate" flag checked in arch_uprobe_skip_sstep(). ppc: Looks like, it can emulate almost everything. Does it actually need to record the fact that emulate_step() failed? Hopefully not. But if yes, it can add the ppc- specific flag into arch_uprobe. TODO: rename arch_uprobe_skip_sstep() to arch_uprobe_emulate_insn(), Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: David A. Long <dave.long@linaro.org> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2014-03-30 10:56:22 -06:00
if (arch_uprobe_skip_sstep(&uprobe->arch, regs))
goto out;
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-13 12:00:11 -06:00
if (!pre_ssout(uprobe, regs, bp_vaddr))
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-13 12:00:11 -06:00
return;
uprobes: Kill UPROBE_SKIP_SSTEP and can_skip_sstep() UPROBE_COPY_INSN, UPROBE_SKIP_SSTEP, and uprobe->flags must die. This patch kills UPROBE_SKIP_SSTEP. I never understood why it was added; not only it doesn't help, it harms. It can only help to avoid arch_uprobe_skip_sstep() if it was already called before and failed. But this is ugly, if we want to know whether we can emulate this instruction or not we should do this analysis in arch_uprobe_analyze_insn(), not when we hit this probe for the first time. And in fact this logic is simply wrong. arch_uprobe_skip_sstep() can fail or not depending on the task/register state, if this insn can be emulated but, say, put_user() fails we need to xol it this time, but this doesn't mean we shouldn't try to emulate it when this or another thread hits this bp next time. And this is the actual reason for this change. We need to emulate the "call" insn, but push(return-address) can obviously fail. Per-arch notes: x86: __skip_sstep() can only emulate "rep;nop". With this change it will be called every time and most probably for no reason. This will be fixed by the next changes. We need to change this suboptimal code anyway. arm: Should not be affected. It has its own "bool simulate" flag checked in arch_uprobe_skip_sstep(). ppc: Looks like, it can emulate almost everything. Does it actually need to record the fact that emulate_step() failed? Hopefully not. But if yes, it can add the ppc- specific flag into arch_uprobe. TODO: rename arch_uprobe_skip_sstep() to arch_uprobe_emulate_insn(), Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: David A. Long <dave.long@linaro.org> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2014-03-30 10:56:22 -06:00
/* arch_uprobe_skip_sstep() succeeded, or restart if can't singlestep */
out:
put_uprobe(uprobe);
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-13 12:00:11 -06:00
}
/*
* Perform required fix-ups and disable singlestep.
* Allow pending signals to take effect.
*/
static void handle_singlestep(struct uprobe_task *utask, struct pt_regs *regs)
{
struct uprobe *uprobe;
int err = 0;
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-13 12:00:11 -06:00
uprobe = utask->active_uprobe;
if (utask->state == UTASK_SSTEP_ACK)
err = arch_uprobe_post_xol(&uprobe->arch, regs);
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-13 12:00:11 -06:00
else if (utask->state == UTASK_SSTEP_TRAPPED)
arch_uprobe_abort_xol(&uprobe->arch, regs);
else
WARN_ON_ONCE(1);
put_uprobe(uprobe);
utask->active_uprobe = NULL;
utask->state = UTASK_RUNNING;
uprobes/core: Allocate XOL slots for uprobes use Uprobes executes the original instruction at a probed location out of line. For this, we allocate a page (per mm) upon the first uprobe hit, in the process user address space, divide it into slots that are used to store the actual instructions to be singlestepped. These slots are known as xol (execution out of line) slots. Care is taken to ensure that the allocation is in an unmapped area as close to the top of the user address space as possible, with appropriate permission settings to keep selinux like frameworks happy. Upon a uprobe hit, a free slot is acquired, and is released after the singlestep completes. Lots of improvements courtesy suggestions/inputs from Peter and Oleg. [ Folded a fix for build issue on powerpc fixed and reported by Stephen Rothwell. ] Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-30 12:26:31 -06:00
xol_free_insn_slot(current);
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-13 12:00:11 -06:00
spin_lock_irq(&current->sighand->siglock);
recalc_sigpending(); /* see uprobe_deny_signal() */
spin_unlock_irq(&current->sighand->siglock);
if (unlikely(err)) {
uprobe_warn(current, "execute the probed insn, sending SIGILL.");
force_sig_info(SIGILL, SEND_SIG_FORCED, current);
}
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-13 12:00:11 -06:00
}
/*
* On breakpoint hit, breakpoint notifier sets the TIF_UPROBE flag and
* allows the thread to return from interrupt. After that handle_swbp()
* sets utask->active_uprobe.
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-13 12:00:11 -06:00
*
* On singlestep exception, singlestep notifier sets the TIF_UPROBE flag
* and allows the thread to return from interrupt.
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-13 12:00:11 -06:00
*
* While returning to userspace, thread notices the TIF_UPROBE flag and calls
* uprobe_notify_resume().
*/
void uprobe_notify_resume(struct pt_regs *regs)
{
struct uprobe_task *utask;
clear_thread_flag(TIF_UPROBE);
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-13 12:00:11 -06:00
utask = current->utask;
if (utask && utask->active_uprobe)
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-13 12:00:11 -06:00
handle_singlestep(utask, regs);
else
handle_swbp(regs);
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-13 12:00:11 -06:00
}
/*
* uprobe_pre_sstep_notifier gets called from interrupt context as part of
* notifier mechanism. Set TIF_UPROBE flag and indicate breakpoint hit.
*/
int uprobe_pre_sstep_notifier(struct pt_regs *regs)
{
if (!current->mm)
return 0;
if (!test_bit(MMF_HAS_UPROBES, &current->mm->flags) &&
(!current->utask || !current->utask->return_instances))
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-13 12:00:11 -06:00
return 0;
set_thread_flag(TIF_UPROBE);
return 1;
}
/*
* uprobe_post_sstep_notifier gets called in interrupt context as part of notifier
* mechanism. Set TIF_UPROBE flag and indicate completion of singlestep.
*/
int uprobe_post_sstep_notifier(struct pt_regs *regs)
{
struct uprobe_task *utask = current->utask;
if (!current->mm || !utask || !utask->active_uprobe)
/* task is currently not uprobed */
return 0;
utask->state = UTASK_SSTEP_ACK;
set_thread_flag(TIF_UPROBE);
return 1;
}
static struct notifier_block uprobe_exception_nb = {
.notifier_call = arch_uprobe_exception_notify,
.priority = INT_MAX-1, /* notified after kprobes, kgdb */
};
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
static int __init init_uprobes(void)
{
int i;
for (i = 0; i < UPROBES_HASH_SZ; i++)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
mutex_init(&uprobes_mmap_mutex[i]);
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-13 12:00:11 -06:00
if (percpu_init_rwsem(&dup_mmap_sem))
return -ENOMEM;
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-13 12:00:11 -06:00
return register_die_notifier(&uprobe_exception_nb);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 02:26:42 -07:00
}
__initcall(init_uprobes);