1
0
Fork 0
alistair23-linux/drivers/gpu/drm/i915/intel_uncore.c

1430 lines
39 KiB
C
Raw Normal View History

/*
* Copyright © 2013 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
* IN THE SOFTWARE.
*/
#include "i915_drv.h"
#include "intel_drv.h"
drm/i915: Introduce a PV INFO page structure for Intel GVT-g. Introduce a PV INFO structure, to facilitate the Intel GVT-g technology, which is a GPU virtualization solution with mediated pass-through. This page contains the shared information between i915 driver and the host emulator. For now, this structure utilizes an area of 4K bytes on HSW GPU's unused MMIO space. Future hardware will have the reserved window architecturally defined, and layout of the page will be added in future BSpec. The i915 driver load routine detects if it is running in a VM by reading the contents of this PV INFO page. Thereafter a flag, vgpu.active is set, and intel_vgpu_active() is used by checking this flag to conclude if GPU is virtualized with Intel GVT-g. By now, intel_vgpu_active() will return true, only when the driver is running as a guest in the Intel GVT-g enhanced environment on HSW platform. v2: take Chris' comments: - call the i915_check_vgpu() in intel_uncore_init() - sanitize i915_check_vgpu() by adding BUILD_BUG_ON() and debug info take Daniel's comments: - put the definition of PV INFO into a new header - i915_vgt_if.h other changes: - access mmio regs by readq/readw in i915_check_vgpu() v3: take Daniel's comments: - move the i915/vgt interfaces into a new i915_vgpu.c - update makefile - add kerneldoc to functions which are non-static - add a DOC: section describing some of the high-level design - update drm docbook other changes: - rename i915_vgt_if.h to i915_vgpu.h v4: take Tvrtko's comments: - fix a typo in commit message - add debug message when vgt version mismatches - rename low_gmadr/high_gmadr to mappable/non-mappable in PV INFO structure Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com> Signed-off-by: Jike Song <jike.song@intel.com> Signed-off-by: Eddie Dong <eddie.dong@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-10 04:05:47 -07:00
#include "i915_vgpu.h"
#include <linux/pm_runtime.h>
#define FORCEWAKE_ACK_TIMEOUT_MS 2
#define __raw_i915_read8(dev_priv__, reg__) readb((dev_priv__)->regs + (reg__))
#define __raw_i915_write8(dev_priv__, reg__, val__) writeb(val__, (dev_priv__)->regs + (reg__))
#define __raw_i915_read16(dev_priv__, reg__) readw((dev_priv__)->regs + (reg__))
#define __raw_i915_write16(dev_priv__, reg__, val__) writew(val__, (dev_priv__)->regs + (reg__))
#define __raw_i915_read32(dev_priv__, reg__) readl((dev_priv__)->regs + (reg__))
#define __raw_i915_write32(dev_priv__, reg__, val__) writel(val__, (dev_priv__)->regs + (reg__))
#define __raw_i915_read64(dev_priv__, reg__) readq((dev_priv__)->regs + (reg__))
#define __raw_i915_write64(dev_priv__, reg__, val__) writeq(val__, (dev_priv__)->regs + (reg__))
#define __raw_posting_read(dev_priv__, reg__) (void)__raw_i915_read32(dev_priv__, reg__)
static const char * const forcewake_domain_names[] = {
"render",
"blitter",
"media",
};
const char *
intel_uncore_forcewake_domain_to_str(const enum forcewake_domain_id id)
{
BUILD_BUG_ON((sizeof(forcewake_domain_names)/sizeof(const char *)) !=
FW_DOMAIN_ID_COUNT);
if (id >= 0 && id < FW_DOMAIN_ID_COUNT)
return forcewake_domain_names[id];
WARN_ON(id);
return "unknown";
}
static void
assert_device_not_suspended(struct drm_i915_private *dev_priv)
{
WARN_ONCE(HAS_RUNTIME_PM(dev_priv->dev) && dev_priv->pm.suspended,
"Device suspended\n");
}
static inline void
fw_domain_reset(const struct intel_uncore_forcewake_domain *d)
{
WARN_ON(d->reg_set == 0);
__raw_i915_write32(d->i915, d->reg_set, d->val_reset);
}
static inline void
fw_domain_arm_timer(struct intel_uncore_forcewake_domain *d)
{
mod_timer_pinned(&d->timer, jiffies + 1);
}
static inline void
fw_domain_wait_ack_clear(const struct intel_uncore_forcewake_domain *d)
{
if (wait_for_atomic((__raw_i915_read32(d->i915, d->reg_ack) &
FORCEWAKE_KERNEL) == 0,
FORCEWAKE_ACK_TIMEOUT_MS))
DRM_ERROR("%s: timed out waiting for forcewake ack to clear.\n",
intel_uncore_forcewake_domain_to_str(d->id));
}
static inline void
fw_domain_get(const struct intel_uncore_forcewake_domain *d)
{
__raw_i915_write32(d->i915, d->reg_set, d->val_set);
}
static inline void
fw_domain_wait_ack(const struct intel_uncore_forcewake_domain *d)
{
if (wait_for_atomic((__raw_i915_read32(d->i915, d->reg_ack) &
FORCEWAKE_KERNEL),
FORCEWAKE_ACK_TIMEOUT_MS))
DRM_ERROR("%s: timed out waiting for forcewake ack request.\n",
intel_uncore_forcewake_domain_to_str(d->id));
}
static inline void
fw_domain_put(const struct intel_uncore_forcewake_domain *d)
{
__raw_i915_write32(d->i915, d->reg_set, d->val_clear);
}
static inline void
fw_domain_posting_read(const struct intel_uncore_forcewake_domain *d)
{
/* something from same cacheline, but not from the set register */
if (d->reg_post)
__raw_posting_read(d->i915, d->reg_post);
}
static void
fw_domains_get(struct drm_i915_private *dev_priv, enum forcewake_domains fw_domains)
{
struct intel_uncore_forcewake_domain *d;
enum forcewake_domain_id id;
for_each_fw_domain_mask(d, fw_domains, dev_priv, id) {
fw_domain_wait_ack_clear(d);
fw_domain_get(d);
fw_domain_wait_ack(d);
}
}
static void
fw_domains_put(struct drm_i915_private *dev_priv, enum forcewake_domains fw_domains)
{
struct intel_uncore_forcewake_domain *d;
enum forcewake_domain_id id;
for_each_fw_domain_mask(d, fw_domains, dev_priv, id) {
fw_domain_put(d);
fw_domain_posting_read(d);
}
}
static void
fw_domains_posting_read(struct drm_i915_private *dev_priv)
{
struct intel_uncore_forcewake_domain *d;
enum forcewake_domain_id id;
/* No need to do for all, just do for first found */
for_each_fw_domain(d, dev_priv, id) {
fw_domain_posting_read(d);
break;
}
}
static void
fw_domains_reset(struct drm_i915_private *dev_priv, enum forcewake_domains fw_domains)
{
struct intel_uncore_forcewake_domain *d;
enum forcewake_domain_id id;
if (dev_priv->uncore.fw_domains == 0)
return;
for_each_fw_domain_mask(d, fw_domains, dev_priv, id)
fw_domain_reset(d);
fw_domains_posting_read(dev_priv);
}
static void __gen6_gt_wait_for_thread_c0(struct drm_i915_private *dev_priv)
{
/* w/a for a sporadic read returning 0 by waiting for the GT
* thread to wake up.
*/
if (wait_for_atomic_us((__raw_i915_read32(dev_priv, GEN6_GT_THREAD_STATUS_REG) &
GEN6_GT_THREAD_STATUS_CORE_MASK) == 0, 500))
DRM_ERROR("GT thread status wait timed out\n");
}
static void fw_domains_get_with_thread_status(struct drm_i915_private *dev_priv,
enum forcewake_domains fw_domains)
{
fw_domains_get(dev_priv, fw_domains);
/* WaRsForcewakeWaitTC0:snb,ivb,hsw,bdw,vlv */
__gen6_gt_wait_for_thread_c0(dev_priv);
}
static void gen6_gt_check_fifodbg(struct drm_i915_private *dev_priv)
{
u32 gtfifodbg;
gtfifodbg = __raw_i915_read32(dev_priv, GTFIFODBG);
if (WARN(gtfifodbg, "GT wake FIFO error 0x%x\n", gtfifodbg))
__raw_i915_write32(dev_priv, GTFIFODBG, gtfifodbg);
}
static void fw_domains_put_with_fifo(struct drm_i915_private *dev_priv,
enum forcewake_domains fw_domains)
{
fw_domains_put(dev_priv, fw_domains);
gen6_gt_check_fifodbg(dev_priv);
}
static inline u32 fifo_free_entries(struct drm_i915_private *dev_priv)
{
u32 count = __raw_i915_read32(dev_priv, GTFIFOCTL);
return count & GT_FIFO_FREE_ENTRIES_MASK;
}
static int __gen6_gt_wait_for_fifo(struct drm_i915_private *dev_priv)
{
int ret = 0;
/* On VLV, FIFO will be shared by both SW and HW.
* So, we need to read the FREE_ENTRIES everytime */
if (IS_VALLEYVIEW(dev_priv->dev))
dev_priv->uncore.fifo_count = fifo_free_entries(dev_priv);
if (dev_priv->uncore.fifo_count < GT_FIFO_NUM_RESERVED_ENTRIES) {
int loop = 500;
u32 fifo = fifo_free_entries(dev_priv);
while (fifo <= GT_FIFO_NUM_RESERVED_ENTRIES && loop--) {
udelay(10);
fifo = fifo_free_entries(dev_priv);
}
if (WARN_ON(loop < 0 && fifo <= GT_FIFO_NUM_RESERVED_ENTRIES))
++ret;
dev_priv->uncore.fifo_count = fifo;
}
dev_priv->uncore.fifo_count--;
return ret;
}
static void intel_uncore_fw_release_timer(unsigned long arg)
{
struct intel_uncore_forcewake_domain *domain = (void *)arg;
unsigned long irqflags;
assert_device_not_suspended(domain->i915);
spin_lock_irqsave(&domain->i915->uncore.lock, irqflags);
if (WARN_ON(domain->wake_count == 0))
domain->wake_count++;
if (--domain->wake_count == 0)
domain->i915->uncore.funcs.force_wake_put(domain->i915,
1 << domain->id);
spin_unlock_irqrestore(&domain->i915->uncore.lock, irqflags);
}
void intel_uncore_forcewake_reset(struct drm_device *dev, bool restore)
{
struct drm_i915_private *dev_priv = dev->dev_private;
unsigned long irqflags;
struct intel_uncore_forcewake_domain *domain;
int retry_count = 100;
enum forcewake_domain_id id;
enum forcewake_domains fw = 0, active_domains;
/* Hold uncore.lock across reset to prevent any register access
* with forcewake not set correctly. Wait until all pending
* timers are run before holding.
*/
while (1) {
active_domains = 0;
for_each_fw_domain(domain, dev_priv, id) {
if (del_timer_sync(&domain->timer) == 0)
continue;
intel_uncore_fw_release_timer((unsigned long)domain);
}
spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);
for_each_fw_domain(domain, dev_priv, id) {
if (timer_pending(&domain->timer))
active_domains |= (1 << id);
}
if (active_domains == 0)
break;
if (--retry_count == 0) {
DRM_ERROR("Timed out waiting for forcewake timers to finish\n");
break;
}
spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags);
cond_resched();
}
WARN_ON(active_domains);
for_each_fw_domain(domain, dev_priv, id)
if (domain->wake_count)
fw |= 1 << id;
if (fw)
dev_priv->uncore.funcs.force_wake_put(dev_priv, fw);
fw_domains_reset(dev_priv, FORCEWAKE_ALL);
if (restore) { /* If reset with a user forcewake, try to restore */
if (fw)
dev_priv->uncore.funcs.force_wake_get(dev_priv, fw);
if (IS_GEN6(dev) || IS_GEN7(dev))
dev_priv->uncore.fifo_count =
fifo_free_entries(dev_priv);
}
if (!restore)
assert_forcewakes_inactive(dev_priv);
spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags);
}
static void intel_uncore_ellc_detect(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
if ((IS_HASWELL(dev) || IS_BROADWELL(dev) ||
INTEL_INFO(dev)->gen >= 9) &&
(__raw_i915_read32(dev_priv, HSW_EDRAM_PRESENT) & EDRAM_ENABLED)) {
/* The docs do not explain exactly how the calculation can be
* made. It is somewhat guessable, but for now, it's always
* 128MB.
* NB: We can't write IDICR yet because we do not have gt funcs
* set up */
dev_priv->ellc_size = 128;
DRM_INFO("Found %zuMB of eLLC\n", dev_priv->ellc_size);
}
}
static void __intel_uncore_early_sanitize(struct drm_device *dev,
bool restore_forcewake)
{
struct drm_i915_private *dev_priv = dev->dev_private;
if (HAS_FPGA_DBG_UNCLAIMED(dev))
__raw_i915_write32(dev_priv, FPGA_DBG, FPGA_DBG_RM_NOCLAIM);
/* clear out old GT FIFO errors */
if (IS_GEN6(dev) || IS_GEN7(dev))
__raw_i915_write32(dev_priv, GTFIFODBG,
__raw_i915_read32(dev_priv, GTFIFODBG));
/* WaDisableShadowRegForCpd:chv */
if (IS_CHERRYVIEW(dev)) {
__raw_i915_write32(dev_priv, GTFIFOCTL,
__raw_i915_read32(dev_priv, GTFIFOCTL) |
GT_FIFO_CTL_BLOCK_ALL_POLICY_STALL |
GT_FIFO_CTL_RC6_POLICY_STALL);
}
intel_uncore_forcewake_reset(dev, restore_forcewake);
}
void intel_uncore_early_sanitize(struct drm_device *dev, bool restore_forcewake)
{
__intel_uncore_early_sanitize(dev, restore_forcewake);
i915_check_and_clear_faults(dev);
}
void intel_uncore_sanitize(struct drm_device *dev)
{
/* BIOS often leaves RC6 enabled, but disable it for hw init */
intel_disable_gt_powersave(dev);
}
/**
* intel_uncore_forcewake_get - grab forcewake domain references
* @dev_priv: i915 device instance
* @fw_domains: forcewake domains to get reference on
*
* This function can be used get GT's forcewake domain references.
* Normal register access will handle the forcewake domains automatically.
* However if some sequence requires the GT to not power down a particular
* forcewake domains this function should be called at the beginning of the
* sequence. And subsequently the reference should be dropped by symmetric
* call to intel_unforce_forcewake_put(). Usually caller wants all the domains
* to be kept awake so the @fw_domains would be then FORCEWAKE_ALL.
*/
void intel_uncore_forcewake_get(struct drm_i915_private *dev_priv,
enum forcewake_domains fw_domains)
{
unsigned long irqflags;
struct intel_uncore_forcewake_domain *domain;
enum forcewake_domain_id id;
if (!dev_priv->uncore.funcs.force_wake_get)
return;
WARN_ON(dev_priv->pm.suspended);
fw_domains &= dev_priv->uncore.fw_domains;
spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);
for_each_fw_domain_mask(domain, fw_domains, dev_priv, id) {
if (domain->wake_count++)
fw_domains &= ~(1 << id);
}
if (fw_domains)
dev_priv->uncore.funcs.force_wake_get(dev_priv, fw_domains);
spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags);
}
/**
* intel_uncore_forcewake_put - release a forcewake domain reference
* @dev_priv: i915 device instance
* @fw_domains: forcewake domains to put references
*
* This function drops the device-level forcewakes for specified
* domains obtained by intel_uncore_forcewake_get().
*/
void intel_uncore_forcewake_put(struct drm_i915_private *dev_priv,
enum forcewake_domains fw_domains)
{
unsigned long irqflags;
struct intel_uncore_forcewake_domain *domain;
enum forcewake_domain_id id;
if (!dev_priv->uncore.funcs.force_wake_put)
return;
fw_domains &= dev_priv->uncore.fw_domains;
spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);
for_each_fw_domain_mask(domain, fw_domains, dev_priv, id) {
if (WARN_ON(domain->wake_count == 0))
continue;
if (--domain->wake_count)
continue;
domain->wake_count++;
fw_domain_arm_timer(domain);
}
spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags);
}
void assert_forcewakes_inactive(struct drm_i915_private *dev_priv)
{
struct intel_uncore_forcewake_domain *domain;
enum forcewake_domain_id id;
if (!dev_priv->uncore.funcs.force_wake_get)
return;
for_each_fw_domain(domain, dev_priv, id)
WARN_ON(domain->wake_count);
}
/* We give fast paths for the really cool registers */
#define NEEDS_FORCE_WAKE(dev_priv, reg) \
((reg) < 0x40000 && (reg) != FORCEWAKE)
#define REG_RANGE(reg, start, end) ((reg) >= (start) && (reg) < (end))
#define FORCEWAKE_VLV_RENDER_RANGE_OFFSET(reg) \
(REG_RANGE((reg), 0x2000, 0x4000) || \
REG_RANGE((reg), 0x5000, 0x8000) || \
REG_RANGE((reg), 0xB000, 0x12000) || \
REG_RANGE((reg), 0x2E000, 0x30000))
#define FORCEWAKE_VLV_MEDIA_RANGE_OFFSET(reg) \
(REG_RANGE((reg), 0x12000, 0x14000) || \
REG_RANGE((reg), 0x22000, 0x24000) || \
REG_RANGE((reg), 0x30000, 0x40000))
#define FORCEWAKE_CHV_RENDER_RANGE_OFFSET(reg) \
(REG_RANGE((reg), 0x2000, 0x4000) || \
REG_RANGE((reg), 0x5200, 0x8000) || \
REG_RANGE((reg), 0x8300, 0x8500) || \
REG_RANGE((reg), 0xB000, 0xB480) || \
REG_RANGE((reg), 0xE000, 0xE800))
#define FORCEWAKE_CHV_MEDIA_RANGE_OFFSET(reg) \
(REG_RANGE((reg), 0x8800, 0x8900) || \
REG_RANGE((reg), 0xD000, 0xD800) || \
REG_RANGE((reg), 0x12000, 0x14000) || \
REG_RANGE((reg), 0x1A000, 0x1C000) || \
REG_RANGE((reg), 0x1E800, 0x1EA00) || \
REG_RANGE((reg), 0x30000, 0x38000))
#define FORCEWAKE_CHV_COMMON_RANGE_OFFSET(reg) \
(REG_RANGE((reg), 0x4000, 0x5000) || \
REG_RANGE((reg), 0x8000, 0x8300) || \
REG_RANGE((reg), 0x8500, 0x8600) || \
REG_RANGE((reg), 0x9000, 0xB000) || \
REG_RANGE((reg), 0xF000, 0x10000))
#define FORCEWAKE_GEN9_UNCORE_RANGE_OFFSET(reg) \
REG_RANGE((reg), 0xB00, 0x2000)
#define FORCEWAKE_GEN9_RENDER_RANGE_OFFSET(reg) \
(REG_RANGE((reg), 0x2000, 0x2700) || \
REG_RANGE((reg), 0x3000, 0x4000) || \
REG_RANGE((reg), 0x5200, 0x8000) || \
REG_RANGE((reg), 0x8140, 0x8160) || \
REG_RANGE((reg), 0x8300, 0x8500) || \
REG_RANGE((reg), 0x8C00, 0x8D00) || \
REG_RANGE((reg), 0xB000, 0xB480) || \
REG_RANGE((reg), 0xE000, 0xE900) || \
REG_RANGE((reg), 0x24400, 0x24800))
#define FORCEWAKE_GEN9_MEDIA_RANGE_OFFSET(reg) \
(REG_RANGE((reg), 0x8130, 0x8140) || \
REG_RANGE((reg), 0x8800, 0x8A00) || \
REG_RANGE((reg), 0xD000, 0xD800) || \
REG_RANGE((reg), 0x12000, 0x14000) || \
REG_RANGE((reg), 0x1A000, 0x1EA00) || \
REG_RANGE((reg), 0x30000, 0x40000))
#define FORCEWAKE_GEN9_COMMON_RANGE_OFFSET(reg) \
REG_RANGE((reg), 0x9400, 0x9800)
#define FORCEWAKE_GEN9_BLITTER_RANGE_OFFSET(reg) \
((reg) < 0x40000 &&\
!FORCEWAKE_GEN9_UNCORE_RANGE_OFFSET(reg) && \
!FORCEWAKE_GEN9_RENDER_RANGE_OFFSET(reg) && \
!FORCEWAKE_GEN9_MEDIA_RANGE_OFFSET(reg) && \
!FORCEWAKE_GEN9_COMMON_RANGE_OFFSET(reg))
static void
ilk_dummy_write(struct drm_i915_private *dev_priv)
{
/* WaIssueDummyWriteToWakeupFromRC6:ilk Issue a dummy write to wake up
* the chip from rc6 before touching it for real. MI_MODE is masked,
* hence harmless to write 0 into. */
__raw_i915_write32(dev_priv, MI_MODE, 0);
}
static void
drm/i915: reorganize the unclaimed register detection code The current code only runs when we do an I915_WRITE operation. It checks if the unclaimed register flag is set before we do the operation, and then it checks it again after we do the operation. This double check allows us to find out if the I915_WRITE operation in question is the bad one, or if some previous code is the bad one. When it finds a problem, our code uses DRM_ERROR to signal it. The good thing about the current code is that it detects the problem, so at least we can know we did something wrong. The problem is that even though we find the problem, we don't really have much information to actually debug it. So whenever I see one of these DRM_ERROR messages on my systems, the first thing I do is apply a patch to change the DRM_ERROR to a WARN and also check for unclaimed registers on I915_READ operations. This local patch makes things even slower, but it usually helps a lot in finding the bad code. The first point here is that since the current code is only useful to detect whether we have a problem or not, but it is not really good to find the cause of the problem, I don't think we should be checking both before and after every I915_WRITE operation: just doing the check once should be enough for us to quickly detect problems. With this change, the code that runs by default for every single user will only do 1 read operation for every single I915_WRITE, instead of 2. This patch does this change. The second point is that the local patch I have should be upstream, but since it makes things slower it should be disabled by default. So I added the i915.mmio_debug option to enable it. So after this patch, this is what will happen: - By default, we will try to detect unclaimed registers once after every I915_WRITE operation. Previously we tried twice for every I915_WRITE. - When we find an unclaimed register we will still print a DRM_ERROR message, but we will now tell the user to try again with i915.mmio_debug=1. - When we use i915.mmio_debug=1 we will try to find unclaimed registers both before and after every I915_READ and I915_WRITE operation, and we will print stack traces in case we find them. This should really help locating the exact point of the bad code (or at least finding out that i915.ko is not the problem). This commit also opens space for really-slow register debugging operations on other platforms. In theory we can now add lots and lots of debug code behind i915.mmio_debug, enable this option on our tests, and catch more problems. v2: - Remove not-so-useful comments (Daniel) - Fix the param definition macros (Rodrigo) Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-16 14:49:29 -06:00
hsw_unclaimed_reg_debug(struct drm_i915_private *dev_priv, u32 reg, bool read,
bool before)
{
drm/i915: reorganize the unclaimed register detection code The current code only runs when we do an I915_WRITE operation. It checks if the unclaimed register flag is set before we do the operation, and then it checks it again after we do the operation. This double check allows us to find out if the I915_WRITE operation in question is the bad one, or if some previous code is the bad one. When it finds a problem, our code uses DRM_ERROR to signal it. The good thing about the current code is that it detects the problem, so at least we can know we did something wrong. The problem is that even though we find the problem, we don't really have much information to actually debug it. So whenever I see one of these DRM_ERROR messages on my systems, the first thing I do is apply a patch to change the DRM_ERROR to a WARN and also check for unclaimed registers on I915_READ operations. This local patch makes things even slower, but it usually helps a lot in finding the bad code. The first point here is that since the current code is only useful to detect whether we have a problem or not, but it is not really good to find the cause of the problem, I don't think we should be checking both before and after every I915_WRITE operation: just doing the check once should be enough for us to quickly detect problems. With this change, the code that runs by default for every single user will only do 1 read operation for every single I915_WRITE, instead of 2. This patch does this change. The second point is that the local patch I have should be upstream, but since it makes things slower it should be disabled by default. So I added the i915.mmio_debug option to enable it. So after this patch, this is what will happen: - By default, we will try to detect unclaimed registers once after every I915_WRITE operation. Previously we tried twice for every I915_WRITE. - When we find an unclaimed register we will still print a DRM_ERROR message, but we will now tell the user to try again with i915.mmio_debug=1. - When we use i915.mmio_debug=1 we will try to find unclaimed registers both before and after every I915_READ and I915_WRITE operation, and we will print stack traces in case we find them. This should really help locating the exact point of the bad code (or at least finding out that i915.ko is not the problem). This commit also opens space for really-slow register debugging operations on other platforms. In theory we can now add lots and lots of debug code behind i915.mmio_debug, enable this option on our tests, and catch more problems. v2: - Remove not-so-useful comments (Daniel) - Fix the param definition macros (Rodrigo) Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-16 14:49:29 -06:00
const char *op = read ? "reading" : "writing to";
const char *when = before ? "before" : "after";
if (!i915.mmio_debug)
return;
if (__raw_i915_read32(dev_priv, FPGA_DBG) & FPGA_DBG_RM_NOCLAIM) {
drm/i915: reorganize the unclaimed register detection code The current code only runs when we do an I915_WRITE operation. It checks if the unclaimed register flag is set before we do the operation, and then it checks it again after we do the operation. This double check allows us to find out if the I915_WRITE operation in question is the bad one, or if some previous code is the bad one. When it finds a problem, our code uses DRM_ERROR to signal it. The good thing about the current code is that it detects the problem, so at least we can know we did something wrong. The problem is that even though we find the problem, we don't really have much information to actually debug it. So whenever I see one of these DRM_ERROR messages on my systems, the first thing I do is apply a patch to change the DRM_ERROR to a WARN and also check for unclaimed registers on I915_READ operations. This local patch makes things even slower, but it usually helps a lot in finding the bad code. The first point here is that since the current code is only useful to detect whether we have a problem or not, but it is not really good to find the cause of the problem, I don't think we should be checking both before and after every I915_WRITE operation: just doing the check once should be enough for us to quickly detect problems. With this change, the code that runs by default for every single user will only do 1 read operation for every single I915_WRITE, instead of 2. This patch does this change. The second point is that the local patch I have should be upstream, but since it makes things slower it should be disabled by default. So I added the i915.mmio_debug option to enable it. So after this patch, this is what will happen: - By default, we will try to detect unclaimed registers once after every I915_WRITE operation. Previously we tried twice for every I915_WRITE. - When we find an unclaimed register we will still print a DRM_ERROR message, but we will now tell the user to try again with i915.mmio_debug=1. - When we use i915.mmio_debug=1 we will try to find unclaimed registers both before and after every I915_READ and I915_WRITE operation, and we will print stack traces in case we find them. This should really help locating the exact point of the bad code (or at least finding out that i915.ko is not the problem). This commit also opens space for really-slow register debugging operations on other platforms. In theory we can now add lots and lots of debug code behind i915.mmio_debug, enable this option on our tests, and catch more problems. v2: - Remove not-so-useful comments (Daniel) - Fix the param definition macros (Rodrigo) Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-16 14:49:29 -06:00
WARN(1, "Unclaimed register detected %s %s register 0x%x\n",
when, op, reg);
__raw_i915_write32(dev_priv, FPGA_DBG, FPGA_DBG_RM_NOCLAIM);
i915.mmio_debug--; /* Only report the first N failures */
}
}
static void
drm/i915: reorganize the unclaimed register detection code The current code only runs when we do an I915_WRITE operation. It checks if the unclaimed register flag is set before we do the operation, and then it checks it again after we do the operation. This double check allows us to find out if the I915_WRITE operation in question is the bad one, or if some previous code is the bad one. When it finds a problem, our code uses DRM_ERROR to signal it. The good thing about the current code is that it detects the problem, so at least we can know we did something wrong. The problem is that even though we find the problem, we don't really have much information to actually debug it. So whenever I see one of these DRM_ERROR messages on my systems, the first thing I do is apply a patch to change the DRM_ERROR to a WARN and also check for unclaimed registers on I915_READ operations. This local patch makes things even slower, but it usually helps a lot in finding the bad code. The first point here is that since the current code is only useful to detect whether we have a problem or not, but it is not really good to find the cause of the problem, I don't think we should be checking both before and after every I915_WRITE operation: just doing the check once should be enough for us to quickly detect problems. With this change, the code that runs by default for every single user will only do 1 read operation for every single I915_WRITE, instead of 2. This patch does this change. The second point is that the local patch I have should be upstream, but since it makes things slower it should be disabled by default. So I added the i915.mmio_debug option to enable it. So after this patch, this is what will happen: - By default, we will try to detect unclaimed registers once after every I915_WRITE operation. Previously we tried twice for every I915_WRITE. - When we find an unclaimed register we will still print a DRM_ERROR message, but we will now tell the user to try again with i915.mmio_debug=1. - When we use i915.mmio_debug=1 we will try to find unclaimed registers both before and after every I915_READ and I915_WRITE operation, and we will print stack traces in case we find them. This should really help locating the exact point of the bad code (or at least finding out that i915.ko is not the problem). This commit also opens space for really-slow register debugging operations on other platforms. In theory we can now add lots and lots of debug code behind i915.mmio_debug, enable this option on our tests, and catch more problems. v2: - Remove not-so-useful comments (Daniel) - Fix the param definition macros (Rodrigo) Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-16 14:49:29 -06:00
hsw_unclaimed_reg_detect(struct drm_i915_private *dev_priv)
{
static bool mmio_debug_once = true;
if (i915.mmio_debug || !mmio_debug_once)
drm/i915: reorganize the unclaimed register detection code The current code only runs when we do an I915_WRITE operation. It checks if the unclaimed register flag is set before we do the operation, and then it checks it again after we do the operation. This double check allows us to find out if the I915_WRITE operation in question is the bad one, or if some previous code is the bad one. When it finds a problem, our code uses DRM_ERROR to signal it. The good thing about the current code is that it detects the problem, so at least we can know we did something wrong. The problem is that even though we find the problem, we don't really have much information to actually debug it. So whenever I see one of these DRM_ERROR messages on my systems, the first thing I do is apply a patch to change the DRM_ERROR to a WARN and also check for unclaimed registers on I915_READ operations. This local patch makes things even slower, but it usually helps a lot in finding the bad code. The first point here is that since the current code is only useful to detect whether we have a problem or not, but it is not really good to find the cause of the problem, I don't think we should be checking both before and after every I915_WRITE operation: just doing the check once should be enough for us to quickly detect problems. With this change, the code that runs by default for every single user will only do 1 read operation for every single I915_WRITE, instead of 2. This patch does this change. The second point is that the local patch I have should be upstream, but since it makes things slower it should be disabled by default. So I added the i915.mmio_debug option to enable it. So after this patch, this is what will happen: - By default, we will try to detect unclaimed registers once after every I915_WRITE operation. Previously we tried twice for every I915_WRITE. - When we find an unclaimed register we will still print a DRM_ERROR message, but we will now tell the user to try again with i915.mmio_debug=1. - When we use i915.mmio_debug=1 we will try to find unclaimed registers both before and after every I915_READ and I915_WRITE operation, and we will print stack traces in case we find them. This should really help locating the exact point of the bad code (or at least finding out that i915.ko is not the problem). This commit also opens space for really-slow register debugging operations on other platforms. In theory we can now add lots and lots of debug code behind i915.mmio_debug, enable this option on our tests, and catch more problems. v2: - Remove not-so-useful comments (Daniel) - Fix the param definition macros (Rodrigo) Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-16 14:49:29 -06:00
return;
if (__raw_i915_read32(dev_priv, FPGA_DBG) & FPGA_DBG_RM_NOCLAIM) {
DRM_DEBUG("Unclaimed register detected, "
"enabling oneshot unclaimed register reporting. "
"Please use i915.mmio_debug=N for more information.\n");
__raw_i915_write32(dev_priv, FPGA_DBG, FPGA_DBG_RM_NOCLAIM);
i915.mmio_debug = mmio_debug_once--;
}
}
#define GEN2_READ_HEADER(x) \
u##x val = 0; \
assert_device_not_suspended(dev_priv);
#define GEN2_READ_FOOTER \
trace_i915_reg_rw(false, reg, val, sizeof(val), trace); \
return val
#define __gen2_read(x) \
static u##x \
gen2_read##x(struct drm_i915_private *dev_priv, off_t reg, bool trace) { \
GEN2_READ_HEADER(x); \
val = __raw_i915_read##x(dev_priv, reg); \
GEN2_READ_FOOTER; \
}
#define __gen5_read(x) \
static u##x \
gen5_read##x(struct drm_i915_private *dev_priv, off_t reg, bool trace) { \
GEN2_READ_HEADER(x); \
ilk_dummy_write(dev_priv); \
val = __raw_i915_read##x(dev_priv, reg); \
GEN2_READ_FOOTER; \
}
__gen5_read(8)
__gen5_read(16)
__gen5_read(32)
__gen5_read(64)
__gen2_read(8)
__gen2_read(16)
__gen2_read(32)
__gen2_read(64)
#undef __gen5_read
#undef __gen2_read
#undef GEN2_READ_FOOTER
#undef GEN2_READ_HEADER
#define GEN6_READ_HEADER(x) \
unsigned long irqflags; \
u##x val = 0; \
assert_device_not_suspended(dev_priv); \
spin_lock_irqsave(&dev_priv->uncore.lock, irqflags)
#define GEN6_READ_FOOTER \
spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags); \
trace_i915_reg_rw(false, reg, val, sizeof(val), trace); \
return val
static inline void __force_wake_get(struct drm_i915_private *dev_priv,
enum forcewake_domains fw_domains)
{
struct intel_uncore_forcewake_domain *domain;
enum forcewake_domain_id id;
if (WARN_ON(!fw_domains))
return;
/* Ideally GCC would be constant-fold and eliminate this loop */
for_each_fw_domain_mask(domain, fw_domains, dev_priv, id) {
if (domain->wake_count) {
fw_domains &= ~(1 << id);
continue;
}
domain->wake_count++;
fw_domain_arm_timer(domain);
}
if (fw_domains)
dev_priv->uncore.funcs.force_wake_get(dev_priv, fw_domains);
}
#define __vgpu_read(x) \
static u##x \
vgpu_read##x(struct drm_i915_private *dev_priv, off_t reg, bool trace) { \
GEN6_READ_HEADER(x); \
val = __raw_i915_read##x(dev_priv, reg); \
GEN6_READ_FOOTER; \
}
#define __gen6_read(x) \
static u##x \
gen6_read##x(struct drm_i915_private *dev_priv, off_t reg, bool trace) { \
GEN6_READ_HEADER(x); \
drm/i915: reorganize the unclaimed register detection code The current code only runs when we do an I915_WRITE operation. It checks if the unclaimed register flag is set before we do the operation, and then it checks it again after we do the operation. This double check allows us to find out if the I915_WRITE operation in question is the bad one, or if some previous code is the bad one. When it finds a problem, our code uses DRM_ERROR to signal it. The good thing about the current code is that it detects the problem, so at least we can know we did something wrong. The problem is that even though we find the problem, we don't really have much information to actually debug it. So whenever I see one of these DRM_ERROR messages on my systems, the first thing I do is apply a patch to change the DRM_ERROR to a WARN and also check for unclaimed registers on I915_READ operations. This local patch makes things even slower, but it usually helps a lot in finding the bad code. The first point here is that since the current code is only useful to detect whether we have a problem or not, but it is not really good to find the cause of the problem, I don't think we should be checking both before and after every I915_WRITE operation: just doing the check once should be enough for us to quickly detect problems. With this change, the code that runs by default for every single user will only do 1 read operation for every single I915_WRITE, instead of 2. This patch does this change. The second point is that the local patch I have should be upstream, but since it makes things slower it should be disabled by default. So I added the i915.mmio_debug option to enable it. So after this patch, this is what will happen: - By default, we will try to detect unclaimed registers once after every I915_WRITE operation. Previously we tried twice for every I915_WRITE. - When we find an unclaimed register we will still print a DRM_ERROR message, but we will now tell the user to try again with i915.mmio_debug=1. - When we use i915.mmio_debug=1 we will try to find unclaimed registers both before and after every I915_READ and I915_WRITE operation, and we will print stack traces in case we find them. This should really help locating the exact point of the bad code (or at least finding out that i915.ko is not the problem). This commit also opens space for really-slow register debugging operations on other platforms. In theory we can now add lots and lots of debug code behind i915.mmio_debug, enable this option on our tests, and catch more problems. v2: - Remove not-so-useful comments (Daniel) - Fix the param definition macros (Rodrigo) Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-16 14:49:29 -06:00
hsw_unclaimed_reg_debug(dev_priv, reg, true, true); \
if (NEEDS_FORCE_WAKE((dev_priv), (reg))) \
__force_wake_get(dev_priv, FORCEWAKE_RENDER); \
val = __raw_i915_read##x(dev_priv, reg); \
drm/i915: reorganize the unclaimed register detection code The current code only runs when we do an I915_WRITE operation. It checks if the unclaimed register flag is set before we do the operation, and then it checks it again after we do the operation. This double check allows us to find out if the I915_WRITE operation in question is the bad one, or if some previous code is the bad one. When it finds a problem, our code uses DRM_ERROR to signal it. The good thing about the current code is that it detects the problem, so at least we can know we did something wrong. The problem is that even though we find the problem, we don't really have much information to actually debug it. So whenever I see one of these DRM_ERROR messages on my systems, the first thing I do is apply a patch to change the DRM_ERROR to a WARN and also check for unclaimed registers on I915_READ operations. This local patch makes things even slower, but it usually helps a lot in finding the bad code. The first point here is that since the current code is only useful to detect whether we have a problem or not, but it is not really good to find the cause of the problem, I don't think we should be checking both before and after every I915_WRITE operation: just doing the check once should be enough for us to quickly detect problems. With this change, the code that runs by default for every single user will only do 1 read operation for every single I915_WRITE, instead of 2. This patch does this change. The second point is that the local patch I have should be upstream, but since it makes things slower it should be disabled by default. So I added the i915.mmio_debug option to enable it. So after this patch, this is what will happen: - By default, we will try to detect unclaimed registers once after every I915_WRITE operation. Previously we tried twice for every I915_WRITE. - When we find an unclaimed register we will still print a DRM_ERROR message, but we will now tell the user to try again with i915.mmio_debug=1. - When we use i915.mmio_debug=1 we will try to find unclaimed registers both before and after every I915_READ and I915_WRITE operation, and we will print stack traces in case we find them. This should really help locating the exact point of the bad code (or at least finding out that i915.ko is not the problem). This commit also opens space for really-slow register debugging operations on other platforms. In theory we can now add lots and lots of debug code behind i915.mmio_debug, enable this option on our tests, and catch more problems. v2: - Remove not-so-useful comments (Daniel) - Fix the param definition macros (Rodrigo) Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-16 14:49:29 -06:00
hsw_unclaimed_reg_debug(dev_priv, reg, true, false); \
GEN6_READ_FOOTER; \
}
#define __vlv_read(x) \
static u##x \
vlv_read##x(struct drm_i915_private *dev_priv, off_t reg, bool trace) { \
GEN6_READ_HEADER(x); \
if (FORCEWAKE_VLV_RENDER_RANGE_OFFSET(reg)) \
__force_wake_get(dev_priv, FORCEWAKE_RENDER); \
else if (FORCEWAKE_VLV_MEDIA_RANGE_OFFSET(reg)) \
__force_wake_get(dev_priv, FORCEWAKE_MEDIA); \
val = __raw_i915_read##x(dev_priv, reg); \
GEN6_READ_FOOTER; \
}
#define __chv_read(x) \
static u##x \
chv_read##x(struct drm_i915_private *dev_priv, off_t reg, bool trace) { \
GEN6_READ_HEADER(x); \
if (FORCEWAKE_CHV_RENDER_RANGE_OFFSET(reg)) \
__force_wake_get(dev_priv, FORCEWAKE_RENDER); \
else if (FORCEWAKE_CHV_MEDIA_RANGE_OFFSET(reg)) \
__force_wake_get(dev_priv, FORCEWAKE_MEDIA); \
else if (FORCEWAKE_CHV_COMMON_RANGE_OFFSET(reg)) \
__force_wake_get(dev_priv, \
FORCEWAKE_RENDER | FORCEWAKE_MEDIA); \
val = __raw_i915_read##x(dev_priv, reg); \
GEN6_READ_FOOTER; \
}
#define SKL_NEEDS_FORCE_WAKE(dev_priv, reg) \
((reg) < 0x40000 && !FORCEWAKE_GEN9_UNCORE_RANGE_OFFSET(reg))
#define __gen9_read(x) \
static u##x \
gen9_read##x(struct drm_i915_private *dev_priv, off_t reg, bool trace) { \
enum forcewake_domains fw_engine; \
GEN6_READ_HEADER(x); \
if (!SKL_NEEDS_FORCE_WAKE((dev_priv), (reg))) \
fw_engine = 0; \
else if (FORCEWAKE_GEN9_RENDER_RANGE_OFFSET(reg)) \
fw_engine = FORCEWAKE_RENDER; \
else if (FORCEWAKE_GEN9_MEDIA_RANGE_OFFSET(reg)) \
fw_engine = FORCEWAKE_MEDIA; \
else if (FORCEWAKE_GEN9_COMMON_RANGE_OFFSET(reg)) \
fw_engine = FORCEWAKE_RENDER | FORCEWAKE_MEDIA; \
else \
fw_engine = FORCEWAKE_BLITTER; \
if (fw_engine) \
__force_wake_get(dev_priv, fw_engine); \
val = __raw_i915_read##x(dev_priv, reg); \
GEN6_READ_FOOTER; \
}
__vgpu_read(8)
__vgpu_read(16)
__vgpu_read(32)
__vgpu_read(64)
__gen9_read(8)
__gen9_read(16)
__gen9_read(32)
__gen9_read(64)
__chv_read(8)
__chv_read(16)
__chv_read(32)
__chv_read(64)
__vlv_read(8)
__vlv_read(16)
__vlv_read(32)
__vlv_read(64)
__gen6_read(8)
__gen6_read(16)
__gen6_read(32)
__gen6_read(64)
#undef __gen9_read
#undef __chv_read
#undef __vlv_read
#undef __gen6_read
#undef __vgpu_read
#undef GEN6_READ_FOOTER
#undef GEN6_READ_HEADER
#define GEN2_WRITE_HEADER \
trace_i915_reg_rw(true, reg, val, sizeof(val), trace); \
assert_device_not_suspended(dev_priv); \
#define GEN2_WRITE_FOOTER
#define __gen2_write(x) \
static void \
gen2_write##x(struct drm_i915_private *dev_priv, off_t reg, u##x val, bool trace) { \
GEN2_WRITE_HEADER; \
__raw_i915_write##x(dev_priv, reg, val); \
GEN2_WRITE_FOOTER; \
}
#define __gen5_write(x) \
static void \
gen5_write##x(struct drm_i915_private *dev_priv, off_t reg, u##x val, bool trace) { \
GEN2_WRITE_HEADER; \
ilk_dummy_write(dev_priv); \
__raw_i915_write##x(dev_priv, reg, val); \
GEN2_WRITE_FOOTER; \
}
__gen5_write(8)
__gen5_write(16)
__gen5_write(32)
__gen5_write(64)
__gen2_write(8)
__gen2_write(16)
__gen2_write(32)
__gen2_write(64)
#undef __gen5_write
#undef __gen2_write
#undef GEN2_WRITE_FOOTER
#undef GEN2_WRITE_HEADER
#define GEN6_WRITE_HEADER \
unsigned long irqflags; \
trace_i915_reg_rw(true, reg, val, sizeof(val), trace); \
assert_device_not_suspended(dev_priv); \
spin_lock_irqsave(&dev_priv->uncore.lock, irqflags)
#define GEN6_WRITE_FOOTER \
spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags)
#define __gen6_write(x) \
static void \
gen6_write##x(struct drm_i915_private *dev_priv, off_t reg, u##x val, bool trace) { \
u32 __fifo_ret = 0; \
GEN6_WRITE_HEADER; \
if (NEEDS_FORCE_WAKE((dev_priv), (reg))) { \
__fifo_ret = __gen6_gt_wait_for_fifo(dev_priv); \
} \
__raw_i915_write##x(dev_priv, reg, val); \
if (unlikely(__fifo_ret)) { \
gen6_gt_check_fifodbg(dev_priv); \
} \
GEN6_WRITE_FOOTER; \
}
#define __hsw_write(x) \
static void \
hsw_write##x(struct drm_i915_private *dev_priv, off_t reg, u##x val, bool trace) { \
u32 __fifo_ret = 0; \
GEN6_WRITE_HEADER; \
if (NEEDS_FORCE_WAKE((dev_priv), (reg))) { \
__fifo_ret = __gen6_gt_wait_for_fifo(dev_priv); \
} \
drm/i915: reorganize the unclaimed register detection code The current code only runs when we do an I915_WRITE operation. It checks if the unclaimed register flag is set before we do the operation, and then it checks it again after we do the operation. This double check allows us to find out if the I915_WRITE operation in question is the bad one, or if some previous code is the bad one. When it finds a problem, our code uses DRM_ERROR to signal it. The good thing about the current code is that it detects the problem, so at least we can know we did something wrong. The problem is that even though we find the problem, we don't really have much information to actually debug it. So whenever I see one of these DRM_ERROR messages on my systems, the first thing I do is apply a patch to change the DRM_ERROR to a WARN and also check for unclaimed registers on I915_READ operations. This local patch makes things even slower, but it usually helps a lot in finding the bad code. The first point here is that since the current code is only useful to detect whether we have a problem or not, but it is not really good to find the cause of the problem, I don't think we should be checking both before and after every I915_WRITE operation: just doing the check once should be enough for us to quickly detect problems. With this change, the code that runs by default for every single user will only do 1 read operation for every single I915_WRITE, instead of 2. This patch does this change. The second point is that the local patch I have should be upstream, but since it makes things slower it should be disabled by default. So I added the i915.mmio_debug option to enable it. So after this patch, this is what will happen: - By default, we will try to detect unclaimed registers once after every I915_WRITE operation. Previously we tried twice for every I915_WRITE. - When we find an unclaimed register we will still print a DRM_ERROR message, but we will now tell the user to try again with i915.mmio_debug=1. - When we use i915.mmio_debug=1 we will try to find unclaimed registers both before and after every I915_READ and I915_WRITE operation, and we will print stack traces in case we find them. This should really help locating the exact point of the bad code (or at least finding out that i915.ko is not the problem). This commit also opens space for really-slow register debugging operations on other platforms. In theory we can now add lots and lots of debug code behind i915.mmio_debug, enable this option on our tests, and catch more problems. v2: - Remove not-so-useful comments (Daniel) - Fix the param definition macros (Rodrigo) Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-16 14:49:29 -06:00
hsw_unclaimed_reg_debug(dev_priv, reg, false, true); \
__raw_i915_write##x(dev_priv, reg, val); \
if (unlikely(__fifo_ret)) { \
gen6_gt_check_fifodbg(dev_priv); \
} \
drm/i915: reorganize the unclaimed register detection code The current code only runs when we do an I915_WRITE operation. It checks if the unclaimed register flag is set before we do the operation, and then it checks it again after we do the operation. This double check allows us to find out if the I915_WRITE operation in question is the bad one, or if some previous code is the bad one. When it finds a problem, our code uses DRM_ERROR to signal it. The good thing about the current code is that it detects the problem, so at least we can know we did something wrong. The problem is that even though we find the problem, we don't really have much information to actually debug it. So whenever I see one of these DRM_ERROR messages on my systems, the first thing I do is apply a patch to change the DRM_ERROR to a WARN and also check for unclaimed registers on I915_READ operations. This local patch makes things even slower, but it usually helps a lot in finding the bad code. The first point here is that since the current code is only useful to detect whether we have a problem or not, but it is not really good to find the cause of the problem, I don't think we should be checking both before and after every I915_WRITE operation: just doing the check once should be enough for us to quickly detect problems. With this change, the code that runs by default for every single user will only do 1 read operation for every single I915_WRITE, instead of 2. This patch does this change. The second point is that the local patch I have should be upstream, but since it makes things slower it should be disabled by default. So I added the i915.mmio_debug option to enable it. So after this patch, this is what will happen: - By default, we will try to detect unclaimed registers once after every I915_WRITE operation. Previously we tried twice for every I915_WRITE. - When we find an unclaimed register we will still print a DRM_ERROR message, but we will now tell the user to try again with i915.mmio_debug=1. - When we use i915.mmio_debug=1 we will try to find unclaimed registers both before and after every I915_READ and I915_WRITE operation, and we will print stack traces in case we find them. This should really help locating the exact point of the bad code (or at least finding out that i915.ko is not the problem). This commit also opens space for really-slow register debugging operations on other platforms. In theory we can now add lots and lots of debug code behind i915.mmio_debug, enable this option on our tests, and catch more problems. v2: - Remove not-so-useful comments (Daniel) - Fix the param definition macros (Rodrigo) Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-16 14:49:29 -06:00
hsw_unclaimed_reg_debug(dev_priv, reg, false, false); \
hsw_unclaimed_reg_detect(dev_priv); \
GEN6_WRITE_FOOTER; \
}
#define __vgpu_write(x) \
static void vgpu_write##x(struct drm_i915_private *dev_priv, \
off_t reg, u##x val, bool trace) { \
GEN6_WRITE_HEADER; \
__raw_i915_write##x(dev_priv, reg, val); \
GEN6_WRITE_FOOTER; \
}
drm/i915/bdw: Handle forcewake for writes on gen8 GEN8 removes the GT FIFO which we've all come to know and love. Instead it offers a wider range of optimized registers which always keep a shadowed copy, and are fed to the GPU when it wakes. How this is implemented in hardware is still somewhat of a mystery. As far as I can tell, the basic design is as follows: If the register is not optimized, you must use the old forcewake mechanism to bring the GT out of sleep. [1] If register is in the optimized list the write will signal that the GT should begin to come out of whatever sleep state it is in. While the GT is coming out of sleep, the requested write will be stored in an intermediate shadow register. Do to the fact that the implementation details are not clear, I see several risks: 1. Order is not preserved as it is with GT FIFO. If we issue multiple writes to optimized registers, where order matters, we may need to serialize it with forcewake. 2. The optimized registers have only 1 shadowed slot, meaning if we issue multiple writes to the same register, and those values need to reach the GPU in order, forcewake will be required. [1] We could implement a SW queue the way the GT FIFO used to work if desired. NOTE: Compile tested only until we get real silicon. v2: - Use a default case to make future platforms also work. - Get rid of IS_BROADWELL since that's not yet defined, but we want to MMIO as soon as possible. v3: Apply suggestions from Mika's review: - s/optimized/shadowed/ - invert the logic of the helper so that it does what it says (the code itself was correct, just confusing to read). v4: - Squash in lost break. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1) Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-11-02 22:07:00 -06:00
static const u32 gen8_shadowed_regs[] = {
FORCEWAKE_MT,
GEN6_RPNSWREQ,
GEN6_RC_VIDEO_FREQ,
RING_TAIL(RENDER_RING_BASE),
RING_TAIL(GEN6_BSD_RING_BASE),
RING_TAIL(VEBOX_RING_BASE),
RING_TAIL(BLT_RING_BASE),
/* TODO: Other registers are not yet used */
};
static bool is_gen8_shadowed(struct drm_i915_private *dev_priv, u32 reg)
{
int i;
for (i = 0; i < ARRAY_SIZE(gen8_shadowed_regs); i++)
if (reg == gen8_shadowed_regs[i])
return true;
return false;
}
#define __gen8_write(x) \
static void \
gen8_write##x(struct drm_i915_private *dev_priv, off_t reg, u##x val, bool trace) { \
GEN6_WRITE_HEADER; \
hsw_unclaimed_reg_debug(dev_priv, reg, false, true); \
if (reg < 0x40000 && !is_gen8_shadowed(dev_priv, reg)) \
__force_wake_get(dev_priv, FORCEWAKE_RENDER); \
__raw_i915_write##x(dev_priv, reg, val); \
hsw_unclaimed_reg_debug(dev_priv, reg, false, false); \
hsw_unclaimed_reg_detect(dev_priv); \
GEN6_WRITE_FOOTER; \
drm/i915/bdw: Handle forcewake for writes on gen8 GEN8 removes the GT FIFO which we've all come to know and love. Instead it offers a wider range of optimized registers which always keep a shadowed copy, and are fed to the GPU when it wakes. How this is implemented in hardware is still somewhat of a mystery. As far as I can tell, the basic design is as follows: If the register is not optimized, you must use the old forcewake mechanism to bring the GT out of sleep. [1] If register is in the optimized list the write will signal that the GT should begin to come out of whatever sleep state it is in. While the GT is coming out of sleep, the requested write will be stored in an intermediate shadow register. Do to the fact that the implementation details are not clear, I see several risks: 1. Order is not preserved as it is with GT FIFO. If we issue multiple writes to optimized registers, where order matters, we may need to serialize it with forcewake. 2. The optimized registers have only 1 shadowed slot, meaning if we issue multiple writes to the same register, and those values need to reach the GPU in order, forcewake will be required. [1] We could implement a SW queue the way the GT FIFO used to work if desired. NOTE: Compile tested only until we get real silicon. v2: - Use a default case to make future platforms also work. - Get rid of IS_BROADWELL since that's not yet defined, but we want to MMIO as soon as possible. v3: Apply suggestions from Mika's review: - s/optimized/shadowed/ - invert the logic of the helper so that it does what it says (the code itself was correct, just confusing to read). v4: - Squash in lost break. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1) Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-11-02 22:07:00 -06:00
}
#define __chv_write(x) \
static void \
chv_write##x(struct drm_i915_private *dev_priv, off_t reg, u##x val, bool trace) { \
bool shadowed = is_gen8_shadowed(dev_priv, reg); \
GEN6_WRITE_HEADER; \
if (!shadowed) { \
if (FORCEWAKE_CHV_RENDER_RANGE_OFFSET(reg)) \
__force_wake_get(dev_priv, FORCEWAKE_RENDER); \
else if (FORCEWAKE_CHV_MEDIA_RANGE_OFFSET(reg)) \
__force_wake_get(dev_priv, FORCEWAKE_MEDIA); \
else if (FORCEWAKE_CHV_COMMON_RANGE_OFFSET(reg)) \
__force_wake_get(dev_priv, FORCEWAKE_RENDER | FORCEWAKE_MEDIA); \
} \
__raw_i915_write##x(dev_priv, reg, val); \
GEN6_WRITE_FOOTER; \
}
static const u32 gen9_shadowed_regs[] = {
RING_TAIL(RENDER_RING_BASE),
RING_TAIL(GEN6_BSD_RING_BASE),
RING_TAIL(VEBOX_RING_BASE),
RING_TAIL(BLT_RING_BASE),
FORCEWAKE_BLITTER_GEN9,
FORCEWAKE_RENDER_GEN9,
FORCEWAKE_MEDIA_GEN9,
GEN6_RPNSWREQ,
GEN6_RC_VIDEO_FREQ,
/* TODO: Other registers are not yet used */
};
static bool is_gen9_shadowed(struct drm_i915_private *dev_priv, u32 reg)
{
int i;
for (i = 0; i < ARRAY_SIZE(gen9_shadowed_regs); i++)
if (reg == gen9_shadowed_regs[i])
return true;
return false;
}
#define __gen9_write(x) \
static void \
gen9_write##x(struct drm_i915_private *dev_priv, off_t reg, u##x val, \
bool trace) { \
enum forcewake_domains fw_engine; \
GEN6_WRITE_HEADER; \
if (!SKL_NEEDS_FORCE_WAKE((dev_priv), (reg)) || \
is_gen9_shadowed(dev_priv, reg)) \
fw_engine = 0; \
else if (FORCEWAKE_GEN9_RENDER_RANGE_OFFSET(reg)) \
fw_engine = FORCEWAKE_RENDER; \
else if (FORCEWAKE_GEN9_MEDIA_RANGE_OFFSET(reg)) \
fw_engine = FORCEWAKE_MEDIA; \
else if (FORCEWAKE_GEN9_COMMON_RANGE_OFFSET(reg)) \
fw_engine = FORCEWAKE_RENDER | FORCEWAKE_MEDIA; \
else \
fw_engine = FORCEWAKE_BLITTER; \
if (fw_engine) \
__force_wake_get(dev_priv, fw_engine); \
__raw_i915_write##x(dev_priv, reg, val); \
GEN6_WRITE_FOOTER; \
}
__gen9_write(8)
__gen9_write(16)
__gen9_write(32)
__gen9_write(64)
__chv_write(8)
__chv_write(16)
__chv_write(32)
__chv_write(64)
drm/i915/bdw: Handle forcewake for writes on gen8 GEN8 removes the GT FIFO which we've all come to know and love. Instead it offers a wider range of optimized registers which always keep a shadowed copy, and are fed to the GPU when it wakes. How this is implemented in hardware is still somewhat of a mystery. As far as I can tell, the basic design is as follows: If the register is not optimized, you must use the old forcewake mechanism to bring the GT out of sleep. [1] If register is in the optimized list the write will signal that the GT should begin to come out of whatever sleep state it is in. While the GT is coming out of sleep, the requested write will be stored in an intermediate shadow register. Do to the fact that the implementation details are not clear, I see several risks: 1. Order is not preserved as it is with GT FIFO. If we issue multiple writes to optimized registers, where order matters, we may need to serialize it with forcewake. 2. The optimized registers have only 1 shadowed slot, meaning if we issue multiple writes to the same register, and those values need to reach the GPU in order, forcewake will be required. [1] We could implement a SW queue the way the GT FIFO used to work if desired. NOTE: Compile tested only until we get real silicon. v2: - Use a default case to make future platforms also work. - Get rid of IS_BROADWELL since that's not yet defined, but we want to MMIO as soon as possible. v3: Apply suggestions from Mika's review: - s/optimized/shadowed/ - invert the logic of the helper so that it does what it says (the code itself was correct, just confusing to read). v4: - Squash in lost break. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1) Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-11-02 22:07:00 -06:00
__gen8_write(8)
__gen8_write(16)
__gen8_write(32)
__gen8_write(64)
__hsw_write(8)
__hsw_write(16)
__hsw_write(32)
__hsw_write(64)
__gen6_write(8)
__gen6_write(16)
__gen6_write(32)
__gen6_write(64)
__vgpu_write(8)
__vgpu_write(16)
__vgpu_write(32)
__vgpu_write(64)
#undef __gen9_write
#undef __chv_write
drm/i915/bdw: Handle forcewake for writes on gen8 GEN8 removes the GT FIFO which we've all come to know and love. Instead it offers a wider range of optimized registers which always keep a shadowed copy, and are fed to the GPU when it wakes. How this is implemented in hardware is still somewhat of a mystery. As far as I can tell, the basic design is as follows: If the register is not optimized, you must use the old forcewake mechanism to bring the GT out of sleep. [1] If register is in the optimized list the write will signal that the GT should begin to come out of whatever sleep state it is in. While the GT is coming out of sleep, the requested write will be stored in an intermediate shadow register. Do to the fact that the implementation details are not clear, I see several risks: 1. Order is not preserved as it is with GT FIFO. If we issue multiple writes to optimized registers, where order matters, we may need to serialize it with forcewake. 2. The optimized registers have only 1 shadowed slot, meaning if we issue multiple writes to the same register, and those values need to reach the GPU in order, forcewake will be required. [1] We could implement a SW queue the way the GT FIFO used to work if desired. NOTE: Compile tested only until we get real silicon. v2: - Use a default case to make future platforms also work. - Get rid of IS_BROADWELL since that's not yet defined, but we want to MMIO as soon as possible. v3: Apply suggestions from Mika's review: - s/optimized/shadowed/ - invert the logic of the helper so that it does what it says (the code itself was correct, just confusing to read). v4: - Squash in lost break. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1) Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-11-02 22:07:00 -06:00
#undef __gen8_write
#undef __hsw_write
#undef __gen6_write
#undef __vgpu_write
#undef GEN6_WRITE_FOOTER
#undef GEN6_WRITE_HEADER
#define ASSIGN_WRITE_MMIO_VFUNCS(x) \
do { \
dev_priv->uncore.funcs.mmio_writeb = x##_write8; \
dev_priv->uncore.funcs.mmio_writew = x##_write16; \
dev_priv->uncore.funcs.mmio_writel = x##_write32; \
dev_priv->uncore.funcs.mmio_writeq = x##_write64; \
} while (0)
#define ASSIGN_READ_MMIO_VFUNCS(x) \
do { \
dev_priv->uncore.funcs.mmio_readb = x##_read8; \
dev_priv->uncore.funcs.mmio_readw = x##_read16; \
dev_priv->uncore.funcs.mmio_readl = x##_read32; \
dev_priv->uncore.funcs.mmio_readq = x##_read64; \
} while (0)
static void fw_domain_init(struct drm_i915_private *dev_priv,
enum forcewake_domain_id domain_id,
u32 reg_set, u32 reg_ack)
{
struct intel_uncore_forcewake_domain *d;
if (WARN_ON(domain_id >= FW_DOMAIN_ID_COUNT))
return;
d = &dev_priv->uncore.fw_domain[domain_id];
WARN_ON(d->wake_count);
d->wake_count = 0;
d->reg_set = reg_set;
d->reg_ack = reg_ack;
if (IS_GEN6(dev_priv)) {
d->val_reset = 0;
d->val_set = FORCEWAKE_KERNEL;
d->val_clear = 0;
} else {
/* WaRsClearFWBitsAtReset:bdw,skl */
d->val_reset = _MASKED_BIT_DISABLE(0xffff);
d->val_set = _MASKED_BIT_ENABLE(FORCEWAKE_KERNEL);
d->val_clear = _MASKED_BIT_DISABLE(FORCEWAKE_KERNEL);
}
if (IS_VALLEYVIEW(dev_priv))
d->reg_post = FORCEWAKE_ACK_VLV;
else if (IS_GEN6(dev_priv) || IS_GEN7(dev_priv) || IS_GEN8(dev_priv))
d->reg_post = ECOBUS;
else
d->reg_post = 0;
d->i915 = dev_priv;
d->id = domain_id;
setup_timer(&d->timer, intel_uncore_fw_release_timer, (unsigned long)d);
dev_priv->uncore.fw_domains |= (1 << domain_id);
fw_domain_reset(d);
}
static void intel_uncore_fw_domains_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
if (INTEL_INFO(dev_priv->dev)->gen <= 5)
return;
if (IS_GEN9(dev)) {
dev_priv->uncore.funcs.force_wake_get = fw_domains_get;
dev_priv->uncore.funcs.force_wake_put = fw_domains_put;
fw_domain_init(dev_priv, FW_DOMAIN_ID_RENDER,
FORCEWAKE_RENDER_GEN9,
FORCEWAKE_ACK_RENDER_GEN9);
fw_domain_init(dev_priv, FW_DOMAIN_ID_BLITTER,
FORCEWAKE_BLITTER_GEN9,
FORCEWAKE_ACK_BLITTER_GEN9);
fw_domain_init(dev_priv, FW_DOMAIN_ID_MEDIA,
FORCEWAKE_MEDIA_GEN9, FORCEWAKE_ACK_MEDIA_GEN9);
} else if (IS_VALLEYVIEW(dev)) {
dev_priv->uncore.funcs.force_wake_get = fw_domains_get;
if (!IS_CHERRYVIEW(dev))
dev_priv->uncore.funcs.force_wake_put =
fw_domains_put_with_fifo;
else
dev_priv->uncore.funcs.force_wake_put = fw_domains_put;
fw_domain_init(dev_priv, FW_DOMAIN_ID_RENDER,
FORCEWAKE_VLV, FORCEWAKE_ACK_VLV);
fw_domain_init(dev_priv, FW_DOMAIN_ID_MEDIA,
FORCEWAKE_MEDIA_VLV, FORCEWAKE_ACK_MEDIA_VLV);
} else if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
dev_priv->uncore.funcs.force_wake_get =
fw_domains_get_with_thread_status;
dev_priv->uncore.funcs.force_wake_put = fw_domains_put;
fw_domain_init(dev_priv, FW_DOMAIN_ID_RENDER,
FORCEWAKE_MT, FORCEWAKE_ACK_HSW);
} else if (IS_IVYBRIDGE(dev)) {
u32 ecobus;
/* IVB configs may use multi-threaded forcewake */
/* A small trick here - if the bios hasn't configured
* MT forcewake, and if the device is in RC6, then
* force_wake_mt_get will not wake the device and the
* ECOBUS read will return zero. Which will be
* (correctly) interpreted by the test below as MT
* forcewake being disabled.
*/
dev_priv->uncore.funcs.force_wake_get =
fw_domains_get_with_thread_status;
dev_priv->uncore.funcs.force_wake_put =
fw_domains_put_with_fifo;
/* We need to init first for ECOBUS access and then
* determine later if we want to reinit, in case of MT access is
* not working. In this stage we don't know which flavour this
* ivb is, so it is better to reset also the gen6 fw registers
* before the ecobus check.
*/
__raw_i915_write32(dev_priv, FORCEWAKE, 0);
__raw_posting_read(dev_priv, ECOBUS);
fw_domain_init(dev_priv, FW_DOMAIN_ID_RENDER,
FORCEWAKE_MT, FORCEWAKE_MT_ACK);
mutex_lock(&dev->struct_mutex);
fw_domains_get_with_thread_status(dev_priv, FORCEWAKE_ALL);
ecobus = __raw_i915_read32(dev_priv, ECOBUS);
fw_domains_put_with_fifo(dev_priv, FORCEWAKE_ALL);
mutex_unlock(&dev->struct_mutex);
if (!(ecobus & FORCEWAKE_MT_ENABLE)) {
DRM_INFO("No MT forcewake available on Ivybridge, this can result in issues\n");
DRM_INFO("when using vblank-synced partial screen updates.\n");
fw_domain_init(dev_priv, FW_DOMAIN_ID_RENDER,
FORCEWAKE, FORCEWAKE_ACK);
}
} else if (IS_GEN6(dev)) {
dev_priv->uncore.funcs.force_wake_get =
fw_domains_get_with_thread_status;
dev_priv->uncore.funcs.force_wake_put =
fw_domains_put_with_fifo;
fw_domain_init(dev_priv, FW_DOMAIN_ID_RENDER,
FORCEWAKE, FORCEWAKE_ACK);
}
/* All future platforms are expected to require complex power gating */
WARN_ON(dev_priv->uncore.fw_domains == 0);
}
void intel_uncore_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
drm/i915: Introduce a PV INFO page structure for Intel GVT-g. Introduce a PV INFO structure, to facilitate the Intel GVT-g technology, which is a GPU virtualization solution with mediated pass-through. This page contains the shared information between i915 driver and the host emulator. For now, this structure utilizes an area of 4K bytes on HSW GPU's unused MMIO space. Future hardware will have the reserved window architecturally defined, and layout of the page will be added in future BSpec. The i915 driver load routine detects if it is running in a VM by reading the contents of this PV INFO page. Thereafter a flag, vgpu.active is set, and intel_vgpu_active() is used by checking this flag to conclude if GPU is virtualized with Intel GVT-g. By now, intel_vgpu_active() will return true, only when the driver is running as a guest in the Intel GVT-g enhanced environment on HSW platform. v2: take Chris' comments: - call the i915_check_vgpu() in intel_uncore_init() - sanitize i915_check_vgpu() by adding BUILD_BUG_ON() and debug info take Daniel's comments: - put the definition of PV INFO into a new header - i915_vgt_if.h other changes: - access mmio regs by readq/readw in i915_check_vgpu() v3: take Daniel's comments: - move the i915/vgt interfaces into a new i915_vgpu.c - update makefile - add kerneldoc to functions which are non-static - add a DOC: section describing some of the high-level design - update drm docbook other changes: - rename i915_vgt_if.h to i915_vgpu.h v4: take Tvrtko's comments: - fix a typo in commit message - add debug message when vgt version mismatches - rename low_gmadr/high_gmadr to mappable/non-mappable in PV INFO structure Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com> Signed-off-by: Jike Song <jike.song@intel.com> Signed-off-by: Eddie Dong <eddie.dong@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-10 04:05:47 -07:00
i915_check_vgpu(dev);
intel_uncore_ellc_detect(dev);
intel_uncore_fw_domains_init(dev);
__intel_uncore_early_sanitize(dev, false);
switch (INTEL_INFO(dev)->gen) {
drm/i915/bdw: Handle forcewake for writes on gen8 GEN8 removes the GT FIFO which we've all come to know and love. Instead it offers a wider range of optimized registers which always keep a shadowed copy, and are fed to the GPU when it wakes. How this is implemented in hardware is still somewhat of a mystery. As far as I can tell, the basic design is as follows: If the register is not optimized, you must use the old forcewake mechanism to bring the GT out of sleep. [1] If register is in the optimized list the write will signal that the GT should begin to come out of whatever sleep state it is in. While the GT is coming out of sleep, the requested write will be stored in an intermediate shadow register. Do to the fact that the implementation details are not clear, I see several risks: 1. Order is not preserved as it is with GT FIFO. If we issue multiple writes to optimized registers, where order matters, we may need to serialize it with forcewake. 2. The optimized registers have only 1 shadowed slot, meaning if we issue multiple writes to the same register, and those values need to reach the GPU in order, forcewake will be required. [1] We could implement a SW queue the way the GT FIFO used to work if desired. NOTE: Compile tested only until we get real silicon. v2: - Use a default case to make future platforms also work. - Get rid of IS_BROADWELL since that's not yet defined, but we want to MMIO as soon as possible. v3: Apply suggestions from Mika's review: - s/optimized/shadowed/ - invert the logic of the helper so that it does what it says (the code itself was correct, just confusing to read). v4: - Squash in lost break. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1) Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-11-02 22:07:00 -06:00
default:
drm/i915: Use BUILD_BUG if possible in the i915 WARN_ON Faster feedback to errors is always better. This is inspired by the addition to WARN_ONs to mask/enable helpers for registers to make sure callers have the arguments ordered correctly: Pretty much always the arguments are static. We use WARN_ON(1) a lot in default switch statements though where we should always handle all cases. So add a new macro specifically for that. The idea to use __builtin_constant_p is from Chris Wilson. v2: Use the ({}) gcc-ism to avoid the static inline, suggested by Dave. My first attempt used __cond as the temp var, which is the same used by BUILD_BUG_ON, but with inverted sense. Hilarity ensued, so sprinkle i915 into the name. Also use a temporary variable to only evaluate the condition once, suggested by Damien. v3: It's crazy but apparently 32bit gcc can't compile out the BUILD_BUG_ON in a lot of cases and just falls over. I have no idea why, but until clue grows just disable this nifty idea on 32bit builds. Reported by 0-day builder. v4: Got it all wrong, apparently its the gcc version. We need 4.9+. Now reported by Imre. v5: Chris suggested to add the case to MISSING_CASE for speedier debug. v6: Even some gcc 4.9 versions don't see through the maze, so give up for now. Keep the skeleton and MISSING_CASE stuff though. Cc: Imre Deak <imre.deak@intel.com> Cc: Damien Lespiau <damien.lespiau@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Dave Gordon <david.s.gordon@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2014-12-08 08:40:10 -07:00
MISSING_CASE(INTEL_INFO(dev)->gen);
return;
case 9:
ASSIGN_WRITE_MMIO_VFUNCS(gen9);
ASSIGN_READ_MMIO_VFUNCS(gen9);
break;
case 8:
if (IS_CHERRYVIEW(dev)) {
ASSIGN_WRITE_MMIO_VFUNCS(chv);
ASSIGN_READ_MMIO_VFUNCS(chv);
} else {
ASSIGN_WRITE_MMIO_VFUNCS(gen8);
ASSIGN_READ_MMIO_VFUNCS(gen6);
}
drm/i915/bdw: Handle forcewake for writes on gen8 GEN8 removes the GT FIFO which we've all come to know and love. Instead it offers a wider range of optimized registers which always keep a shadowed copy, and are fed to the GPU when it wakes. How this is implemented in hardware is still somewhat of a mystery. As far as I can tell, the basic design is as follows: If the register is not optimized, you must use the old forcewake mechanism to bring the GT out of sleep. [1] If register is in the optimized list the write will signal that the GT should begin to come out of whatever sleep state it is in. While the GT is coming out of sleep, the requested write will be stored in an intermediate shadow register. Do to the fact that the implementation details are not clear, I see several risks: 1. Order is not preserved as it is with GT FIFO. If we issue multiple writes to optimized registers, where order matters, we may need to serialize it with forcewake. 2. The optimized registers have only 1 shadowed slot, meaning if we issue multiple writes to the same register, and those values need to reach the GPU in order, forcewake will be required. [1] We could implement a SW queue the way the GT FIFO used to work if desired. NOTE: Compile tested only until we get real silicon. v2: - Use a default case to make future platforms also work. - Get rid of IS_BROADWELL since that's not yet defined, but we want to MMIO as soon as possible. v3: Apply suggestions from Mika's review: - s/optimized/shadowed/ - invert the logic of the helper so that it does what it says (the code itself was correct, just confusing to read). v4: - Squash in lost break. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1) Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-11-02 22:07:00 -06:00
break;
case 7:
case 6:
if (IS_HASWELL(dev)) {
ASSIGN_WRITE_MMIO_VFUNCS(hsw);
} else {
ASSIGN_WRITE_MMIO_VFUNCS(gen6);
}
if (IS_VALLEYVIEW(dev)) {
ASSIGN_READ_MMIO_VFUNCS(vlv);
} else {
ASSIGN_READ_MMIO_VFUNCS(gen6);
}
break;
case 5:
ASSIGN_WRITE_MMIO_VFUNCS(gen5);
ASSIGN_READ_MMIO_VFUNCS(gen5);
break;
case 4:
case 3:
case 2:
ASSIGN_WRITE_MMIO_VFUNCS(gen2);
ASSIGN_READ_MMIO_VFUNCS(gen2);
break;
}
if (intel_vgpu_active(dev)) {
ASSIGN_WRITE_MMIO_VFUNCS(vgpu);
ASSIGN_READ_MMIO_VFUNCS(vgpu);
}
i915_check_and_clear_faults(dev);
}
#undef ASSIGN_WRITE_MMIO_VFUNCS
#undef ASSIGN_READ_MMIO_VFUNCS
void intel_uncore_fini(struct drm_device *dev)
{
/* Paranoia: make sure we have disabled everything before we exit. */
intel_uncore_sanitize(dev);
intel_uncore_forcewake_reset(dev, false);
}
#define GEN_RANGE(l, h) GENMASK(h, l)
static const struct register_whitelist {
uint64_t offset;
uint32_t size;
/* supported gens, 0x10 for 4, 0x30 for 4 and 5, etc. */
uint32_t gen_bitmask;
} whitelist[] = {
{ RING_TIMESTAMP(RENDER_RING_BASE), 8, GEN_RANGE(4, 9) },
};
int i915_reg_read_ioctl(struct drm_device *dev,
void *data, struct drm_file *file)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_i915_reg_read *reg = data;
struct register_whitelist const *entry = whitelist;
int i, ret = 0;
for (i = 0; i < ARRAY_SIZE(whitelist); i++, entry++) {
if (entry->offset == reg->offset &&
(1 << INTEL_INFO(dev)->gen & entry->gen_bitmask))
break;
}
if (i == ARRAY_SIZE(whitelist))
return -EINVAL;
intel_runtime_pm_get(dev_priv);
switch (entry->size) {
case 8:
reg->val = I915_READ64(reg->offset);
break;
case 4:
reg->val = I915_READ(reg->offset);
break;
case 2:
reg->val = I915_READ16(reg->offset);
break;
case 1:
reg->val = I915_READ8(reg->offset);
break;
default:
drm/i915: Use BUILD_BUG if possible in the i915 WARN_ON Faster feedback to errors is always better. This is inspired by the addition to WARN_ONs to mask/enable helpers for registers to make sure callers have the arguments ordered correctly: Pretty much always the arguments are static. We use WARN_ON(1) a lot in default switch statements though where we should always handle all cases. So add a new macro specifically for that. The idea to use __builtin_constant_p is from Chris Wilson. v2: Use the ({}) gcc-ism to avoid the static inline, suggested by Dave. My first attempt used __cond as the temp var, which is the same used by BUILD_BUG_ON, but with inverted sense. Hilarity ensued, so sprinkle i915 into the name. Also use a temporary variable to only evaluate the condition once, suggested by Damien. v3: It's crazy but apparently 32bit gcc can't compile out the BUILD_BUG_ON in a lot of cases and just falls over. I have no idea why, but until clue grows just disable this nifty idea on 32bit builds. Reported by 0-day builder. v4: Got it all wrong, apparently its the gcc version. We need 4.9+. Now reported by Imre. v5: Chris suggested to add the case to MISSING_CASE for speedier debug. v6: Even some gcc 4.9 versions don't see through the maze, so give up for now. Keep the skeleton and MISSING_CASE stuff though. Cc: Imre Deak <imre.deak@intel.com> Cc: Damien Lespiau <damien.lespiau@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Dave Gordon <david.s.gordon@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2014-12-08 08:40:10 -07:00
MISSING_CASE(entry->size);
ret = -EINVAL;
goto out;
}
out:
intel_runtime_pm_put(dev_priv);
return ret;
}
int i915_get_reset_stats_ioctl(struct drm_device *dev,
void *data, struct drm_file *file)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_i915_reset_stats *args = data;
struct i915_ctx_hang_stats *hs;
struct intel_context *ctx;
int ret;
if (args->flags || args->pad)
return -EINVAL;
drm/i915: Emphasize that ctx->id is merely a user handle This is an Execlists preparatory patch, since they make context ID become an overloaded term: - In the software, it was used to distinguish which context userspace was trying to use. - In the BSpec, the term is used to describe the 20-bits long field the hardware uses to it to discriminate the contexts that are submitted to the ELSP and inform the driver about their current status (via Context Switch Interrupts and Context Status Buffers). Initially, I tried to make the different meanings converge, but it proved impossible: - The software ctx->id is per-filp, while the hardware one needs to be globally unique. - Also, we multiplex several backing states objects per intel_context, and all of them need unique HW IDs. - I tried adding a per-filp ID and then composing the HW context ID as: ctx->id + file_priv->id + ring->id, but the fact that the hardware only uses 20-bits means we have to artificially limit the number of filps or contexts the userspace can create. The ctx->user_handle renaming bits are done with this Cocci patch (plus manual frobbing of the struct declaration): @@ struct intel_context c; @@ - (c).id + c.user_handle @@ struct intel_context *c; @@ - (c)->id + c->user_handle Also, while we are at it, s/DEFAULT_CONTEXT_ID/DEFAULT_CONTEXT_HANDLE and change the type to unsigned 32 bits. v2: s/handle/user_handle and change the type to uint32_t as suggested by Chris Wilson. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v1) Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-03 09:28:00 -06:00
if (args->ctx_id == DEFAULT_CONTEXT_HANDLE && !capable(CAP_SYS_ADMIN))
return -EPERM;
ret = mutex_lock_interruptible(&dev->struct_mutex);
if (ret)
return ret;
drm/i915: Get context early in execbuf We need to have the address space when reserving space for the objects. Since the address space and context are tied together, and reserve occurs before context switch (for good reason), we must lookup our context earlier in the process. This leaves some room for optimizations where we no longer need to use ctx_id in certain places. This will be addressed in a subsequent patch. Important tricky bit: Because slow relocations during execbuffer drop struct_mutex Perhaps it would be best to acquire the reference when we get the context, but I'll save that for another day (note I have written the patch before, and I found the changes required to be uglier than this). Note that since we currently access everything via context id, and not the data structure this is fine, though not desirable. The next change attempts to get the context only once via the context ID idr lookup, and as such, the following can happen: CTX-A is created, refcount = 1 CTX-A execbuf, mutex dropped close IOCTL called on CTX-A, refcount = 0 CTX-A resumes in execbuf. v2: Rebased on top of commit b6359918b885da7c7b58c050674278dbd06020ab Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Wed Oct 30 15:44:16 2013 +0200 drm/i915: add i915_get_reset_stats_ioctl v3: Rebased on top of commit 25b3dfc87bff80317d67ddd2cd4cfb91e6fe7d79 Author: Mika Westerberg <mika.westerberg@linux.intel.com> Date: Tue Nov 12 11:57:30 2013 +0200 Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Tue Nov 26 16:14:33 2013 +0200 drm/i915: check context reset stats before relocations Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-06 15:11:21 -07:00
ctx = i915_gem_context_get(file->driver_priv, args->ctx_id);
if (IS_ERR(ctx)) {
mutex_unlock(&dev->struct_mutex);
drm/i915: Get context early in execbuf We need to have the address space when reserving space for the objects. Since the address space and context are tied together, and reserve occurs before context switch (for good reason), we must lookup our context earlier in the process. This leaves some room for optimizations where we no longer need to use ctx_id in certain places. This will be addressed in a subsequent patch. Important tricky bit: Because slow relocations during execbuffer drop struct_mutex Perhaps it would be best to acquire the reference when we get the context, but I'll save that for another day (note I have written the patch before, and I found the changes required to be uglier than this). Note that since we currently access everything via context id, and not the data structure this is fine, though not desirable. The next change attempts to get the context only once via the context ID idr lookup, and as such, the following can happen: CTX-A is created, refcount = 1 CTX-A execbuf, mutex dropped close IOCTL called on CTX-A, refcount = 0 CTX-A resumes in execbuf. v2: Rebased on top of commit b6359918b885da7c7b58c050674278dbd06020ab Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Wed Oct 30 15:44:16 2013 +0200 drm/i915: add i915_get_reset_stats_ioctl v3: Rebased on top of commit 25b3dfc87bff80317d67ddd2cd4cfb91e6fe7d79 Author: Mika Westerberg <mika.westerberg@linux.intel.com> Date: Tue Nov 12 11:57:30 2013 +0200 Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Tue Nov 26 16:14:33 2013 +0200 drm/i915: check context reset stats before relocations Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-06 15:11:21 -07:00
return PTR_ERR(ctx);
}
drm/i915: Get context early in execbuf We need to have the address space when reserving space for the objects. Since the address space and context are tied together, and reserve occurs before context switch (for good reason), we must lookup our context earlier in the process. This leaves some room for optimizations where we no longer need to use ctx_id in certain places. This will be addressed in a subsequent patch. Important tricky bit: Because slow relocations during execbuffer drop struct_mutex Perhaps it would be best to acquire the reference when we get the context, but I'll save that for another day (note I have written the patch before, and I found the changes required to be uglier than this). Note that since we currently access everything via context id, and not the data structure this is fine, though not desirable. The next change attempts to get the context only once via the context ID idr lookup, and as such, the following can happen: CTX-A is created, refcount = 1 CTX-A execbuf, mutex dropped close IOCTL called on CTX-A, refcount = 0 CTX-A resumes in execbuf. v2: Rebased on top of commit b6359918b885da7c7b58c050674278dbd06020ab Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Wed Oct 30 15:44:16 2013 +0200 drm/i915: add i915_get_reset_stats_ioctl v3: Rebased on top of commit 25b3dfc87bff80317d67ddd2cd4cfb91e6fe7d79 Author: Mika Westerberg <mika.westerberg@linux.intel.com> Date: Tue Nov 12 11:57:30 2013 +0200 Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Tue Nov 26 16:14:33 2013 +0200 drm/i915: check context reset stats before relocations Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-06 15:11:21 -07:00
hs = &ctx->hang_stats;
if (capable(CAP_SYS_ADMIN))
args->reset_count = i915_reset_count(&dev_priv->gpu_error);
else
args->reset_count = 0;
args->batch_active = hs->batch_active;
args->batch_pending = hs->batch_pending;
mutex_unlock(&dev->struct_mutex);
return 0;
}
static int i915_reset_complete(struct drm_device *dev)
{
u8 gdrst;
pci_read_config_byte(dev->pdev, I915_GDRST, &gdrst);
return (gdrst & GRDOM_RESET_STATUS) == 0;
}
static int i915_do_reset(struct drm_device *dev)
{
/* assert reset for at least 20 usec */
pci_write_config_byte(dev->pdev, I915_GDRST, GRDOM_RESET_ENABLE);
udelay(20);
pci_write_config_byte(dev->pdev, I915_GDRST, 0);
return wait_for(i915_reset_complete(dev), 500);
}
static int g4x_reset_complete(struct drm_device *dev)
{
u8 gdrst;
pci_read_config_byte(dev->pdev, I915_GDRST, &gdrst);
return (gdrst & GRDOM_RESET_ENABLE) == 0;
}
static int g33_do_reset(struct drm_device *dev)
{
pci_write_config_byte(dev->pdev, I915_GDRST, GRDOM_RESET_ENABLE);
return wait_for(g4x_reset_complete(dev), 500);
}
static int g4x_do_reset(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int ret;
pci_write_config_byte(dev->pdev, I915_GDRST,
GRDOM_RENDER | GRDOM_RESET_ENABLE);
ret = wait_for(g4x_reset_complete(dev), 500);
if (ret)
return ret;
/* WaVcpClkGateDisableForMediaReset:ctg,elk */
I915_WRITE(VDECCLK_GATE_D, I915_READ(VDECCLK_GATE_D) | VCP_UNIT_CLOCK_GATE_DISABLE);
POSTING_READ(VDECCLK_GATE_D);
pci_write_config_byte(dev->pdev, I915_GDRST,
GRDOM_MEDIA | GRDOM_RESET_ENABLE);
ret = wait_for(g4x_reset_complete(dev), 500);
if (ret)
return ret;
/* WaVcpClkGateDisableForMediaReset:ctg,elk */
I915_WRITE(VDECCLK_GATE_D, I915_READ(VDECCLK_GATE_D) & ~VCP_UNIT_CLOCK_GATE_DISABLE);
POSTING_READ(VDECCLK_GATE_D);
pci_write_config_byte(dev->pdev, I915_GDRST, 0);
return 0;
}
static int ironlake_do_reset(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int ret;
I915_WRITE(MCHBAR_MIRROR_BASE + ILK_GDSR,
ILK_GRDOM_RENDER | ILK_GRDOM_RESET_ENABLE);
ret = wait_for((I915_READ(MCHBAR_MIRROR_BASE + ILK_GDSR) &
ILK_GRDOM_RESET_ENABLE) == 0, 500);
if (ret)
return ret;
I915_WRITE(MCHBAR_MIRROR_BASE + ILK_GDSR,
ILK_GRDOM_MEDIA | ILK_GRDOM_RESET_ENABLE);
ret = wait_for((I915_READ(MCHBAR_MIRROR_BASE + ILK_GDSR) &
ILK_GRDOM_RESET_ENABLE) == 0, 500);
if (ret)
return ret;
I915_WRITE(MCHBAR_MIRROR_BASE + ILK_GDSR, 0);
return 0;
}
static int gen6_do_reset(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int ret;
/* Reset the chip */
/* GEN6_GDRST is not in the gt power well, no need to check
* for fifo space for the write or forcewake the chip for
* the read
*/
__raw_i915_write32(dev_priv, GEN6_GDRST, GEN6_GRDOM_FULL);
/* Spin waiting for the device to ack the reset request */
ret = wait_for((__raw_i915_read32(dev_priv, GEN6_GDRST) & GEN6_GRDOM_FULL) == 0, 500);
intel_uncore_forcewake_reset(dev, true);
return ret;
}
int intel_gpu_reset(struct drm_device *dev)
{
if (INTEL_INFO(dev)->gen >= 6)
return gen6_do_reset(dev);
else if (IS_GEN5(dev))
return ironlake_do_reset(dev);
else if (IS_G4X(dev))
return g4x_do_reset(dev);
else if (IS_G33(dev))
return g33_do_reset(dev);
else if (INTEL_INFO(dev)->gen >= 3)
return i915_do_reset(dev);
else
return -ENODEV;
}
void intel_uncore_check_errors(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
if (HAS_FPGA_DBG_UNCLAIMED(dev) &&
(__raw_i915_read32(dev_priv, FPGA_DBG) & FPGA_DBG_RM_NOCLAIM)) {
DRM_ERROR("Unclaimed register before interrupt\n");
__raw_i915_write32(dev_priv, FPGA_DBG, FPGA_DBG_RM_NOCLAIM);
}
}