alistair23-linux/drivers/acpi/arm64/iort.c

1642 lines
41 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
ACPI: I/O Remapping Table (IORT) initial support IORT shows representation of IO topology for ARM based systems. It describes how various components are connected together on parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf Initial support allows to detect IORT table presence and save its root pointer obtained through acpi_get_table(). The pointer validity depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap is not set while using IORT nodes we would dereference unmapped pointers. For the aforementioned reason call acpi_iort_init() from acpi_init() which guarantees acpi_gbl_permanent_mmap to be set at that point. Add generic helpers which are helpful for scanning and retrieving information from IORT table content. List of the most important helpers: - iort_find_dev_node() finds IORT node for a given device - iort_node_map_rid() maps device RID and returns IORT node which provides final translation IORT support is placed under drivers/acpi/arm64/ new directory due to its ARM64 specific nature. The code there is considered only for ARM64. The long term plan is to keep all ARM64 specific tables support in this place e.g. GTDT table. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-12 12:54:20 -06:00
/*
* Copyright (C) 2016, Semihalf
* Author: Tomasz Nowicki <tn@semihalf.com>
*
* This file implements early detection/parsing of I/O mapping
* reported to OS through firmware via I/O Remapping Table (IORT)
* IORT document number: ARM DEN 0049A
*/
#define pr_fmt(fmt) "ACPI: IORT: " fmt
#include <linux/acpi_iort.h>
#include <linux/iommu.h>
ACPI: I/O Remapping Table (IORT) initial support IORT shows representation of IO topology for ARM based systems. It describes how various components are connected together on parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf Initial support allows to detect IORT table presence and save its root pointer obtained through acpi_get_table(). The pointer validity depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap is not set while using IORT nodes we would dereference unmapped pointers. For the aforementioned reason call acpi_iort_init() from acpi_init() which guarantees acpi_gbl_permanent_mmap to be set at that point. Add generic helpers which are helpful for scanning and retrieving information from IORT table content. List of the most important helpers: - iort_find_dev_node() finds IORT node for a given device - iort_node_map_rid() maps device RID and returns IORT node which provides final translation IORT support is placed under drivers/acpi/arm64/ new directory due to its ARM64 specific nature. The code there is considered only for ARM64. The long term plan is to keep all ARM64 specific tables support in this place e.g. GTDT table. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-12 12:54:20 -06:00
#include <linux/kernel.h>
#include <linux/list.h>
ACPI: I/O Remapping Table (IORT) initial support IORT shows representation of IO topology for ARM based systems. It describes how various components are connected together on parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf Initial support allows to detect IORT table presence and save its root pointer obtained through acpi_get_table(). The pointer validity depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap is not set while using IORT nodes we would dereference unmapped pointers. For the aforementioned reason call acpi_iort_init() from acpi_init() which guarantees acpi_gbl_permanent_mmap to be set at that point. Add generic helpers which are helpful for scanning and retrieving information from IORT table content. List of the most important helpers: - iort_find_dev_node() finds IORT node for a given device - iort_node_map_rid() maps device RID and returns IORT node which provides final translation IORT support is placed under drivers/acpi/arm64/ new directory due to its ARM64 specific nature. The code there is considered only for ARM64. The long term plan is to keep all ARM64 specific tables support in this place e.g. GTDT table. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-12 12:54:20 -06:00
#include <linux/pci.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
ACPI: I/O Remapping Table (IORT) initial support IORT shows representation of IO topology for ARM based systems. It describes how various components are connected together on parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf Initial support allows to detect IORT table presence and save its root pointer obtained through acpi_get_table(). The pointer validity depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap is not set while using IORT nodes we would dereference unmapped pointers. For the aforementioned reason call acpi_iort_init() from acpi_init() which guarantees acpi_gbl_permanent_mmap to be set at that point. Add generic helpers which are helpful for scanning and retrieving information from IORT table content. List of the most important helpers: - iort_find_dev_node() finds IORT node for a given device - iort_node_map_rid() maps device RID and returns IORT node which provides final translation IORT support is placed under drivers/acpi/arm64/ new directory due to its ARM64 specific nature. The code there is considered only for ARM64. The long term plan is to keep all ARM64 specific tables support in this place e.g. GTDT table. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-12 12:54:20 -06:00
#define IORT_TYPE_MASK(type) (1 << (type))
#define IORT_MSI_TYPE (1 << ACPI_IORT_NODE_ITS_GROUP)
#define IORT_IOMMU_TYPE ((1 << ACPI_IORT_NODE_SMMU) | \
(1 << ACPI_IORT_NODE_SMMU_V3))
struct iort_its_msi_chip {
struct list_head list;
struct fwnode_handle *fw_node;
phys_addr_t base_addr;
u32 translation_id;
};
struct iort_fwnode {
struct list_head list;
struct acpi_iort_node *iort_node;
struct fwnode_handle *fwnode;
};
static LIST_HEAD(iort_fwnode_list);
static DEFINE_SPINLOCK(iort_fwnode_lock);
/**
* iort_set_fwnode() - Create iort_fwnode and use it to register
* iommu data in the iort_fwnode_list
*
* @node: IORT table node associated with the IOMMU
* @fwnode: fwnode associated with the IORT node
*
* Returns: 0 on success
* <0 on failure
*/
static inline int iort_set_fwnode(struct acpi_iort_node *iort_node,
struct fwnode_handle *fwnode)
{
struct iort_fwnode *np;
np = kzalloc(sizeof(struct iort_fwnode), GFP_ATOMIC);
if (WARN_ON(!np))
return -ENOMEM;
INIT_LIST_HEAD(&np->list);
np->iort_node = iort_node;
np->fwnode = fwnode;
spin_lock(&iort_fwnode_lock);
list_add_tail(&np->list, &iort_fwnode_list);
spin_unlock(&iort_fwnode_lock);
return 0;
}
/**
* iort_get_fwnode() - Retrieve fwnode associated with an IORT node
*
* @node: IORT table node to be looked-up
*
* Returns: fwnode_handle pointer on success, NULL on failure
*/
static inline struct fwnode_handle *iort_get_fwnode(
struct acpi_iort_node *node)
{
struct iort_fwnode *curr;
struct fwnode_handle *fwnode = NULL;
spin_lock(&iort_fwnode_lock);
list_for_each_entry(curr, &iort_fwnode_list, list) {
if (curr->iort_node == node) {
fwnode = curr->fwnode;
break;
}
}
spin_unlock(&iort_fwnode_lock);
return fwnode;
}
/**
* iort_delete_fwnode() - Delete fwnode associated with an IORT node
*
* @node: IORT table node associated with fwnode to delete
*/
static inline void iort_delete_fwnode(struct acpi_iort_node *node)
{
struct iort_fwnode *curr, *tmp;
spin_lock(&iort_fwnode_lock);
list_for_each_entry_safe(curr, tmp, &iort_fwnode_list, list) {
if (curr->iort_node == node) {
list_del(&curr->list);
kfree(curr);
break;
}
}
spin_unlock(&iort_fwnode_lock);
}
/**
* iort_get_iort_node() - Retrieve iort_node associated with an fwnode
*
* @fwnode: fwnode associated with device to be looked-up
*
* Returns: iort_node pointer on success, NULL on failure
*/
static inline struct acpi_iort_node *iort_get_iort_node(
struct fwnode_handle *fwnode)
{
struct iort_fwnode *curr;
struct acpi_iort_node *iort_node = NULL;
spin_lock(&iort_fwnode_lock);
list_for_each_entry(curr, &iort_fwnode_list, list) {
if (curr->fwnode == fwnode) {
iort_node = curr->iort_node;
break;
}
}
spin_unlock(&iort_fwnode_lock);
return iort_node;
}
ACPI: I/O Remapping Table (IORT) initial support IORT shows representation of IO topology for ARM based systems. It describes how various components are connected together on parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf Initial support allows to detect IORT table presence and save its root pointer obtained through acpi_get_table(). The pointer validity depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap is not set while using IORT nodes we would dereference unmapped pointers. For the aforementioned reason call acpi_iort_init() from acpi_init() which guarantees acpi_gbl_permanent_mmap to be set at that point. Add generic helpers which are helpful for scanning and retrieving information from IORT table content. List of the most important helpers: - iort_find_dev_node() finds IORT node for a given device - iort_node_map_rid() maps device RID and returns IORT node which provides final translation IORT support is placed under drivers/acpi/arm64/ new directory due to its ARM64 specific nature. The code there is considered only for ARM64. The long term plan is to keep all ARM64 specific tables support in this place e.g. GTDT table. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-12 12:54:20 -06:00
typedef acpi_status (*iort_find_node_callback)
(struct acpi_iort_node *node, void *context);
/* Root pointer to the mapped IORT table */
static struct acpi_table_header *iort_table;
static LIST_HEAD(iort_msi_chip_list);
static DEFINE_SPINLOCK(iort_msi_chip_lock);
/**
* iort_register_domain_token() - register domain token along with related
* ITS ID and base address to the list from where we can get it back later on.
* @trans_id: ITS ID.
* @base: ITS base address.
* @fw_node: Domain token.
*
* Returns: 0 on success, -ENOMEM if no memory when allocating list element
*/
int iort_register_domain_token(int trans_id, phys_addr_t base,
struct fwnode_handle *fw_node)
{
struct iort_its_msi_chip *its_msi_chip;
its_msi_chip = kzalloc(sizeof(*its_msi_chip), GFP_KERNEL);
if (!its_msi_chip)
return -ENOMEM;
its_msi_chip->fw_node = fw_node;
its_msi_chip->translation_id = trans_id;
its_msi_chip->base_addr = base;
spin_lock(&iort_msi_chip_lock);
list_add(&its_msi_chip->list, &iort_msi_chip_list);
spin_unlock(&iort_msi_chip_lock);
return 0;
}
/**
* iort_deregister_domain_token() - Deregister domain token based on ITS ID
* @trans_id: ITS ID.
*
* Returns: none.
*/
void iort_deregister_domain_token(int trans_id)
{
struct iort_its_msi_chip *its_msi_chip, *t;
spin_lock(&iort_msi_chip_lock);
list_for_each_entry_safe(its_msi_chip, t, &iort_msi_chip_list, list) {
if (its_msi_chip->translation_id == trans_id) {
list_del(&its_msi_chip->list);
kfree(its_msi_chip);
break;
}
}
spin_unlock(&iort_msi_chip_lock);
}
/**
* iort_find_domain_token() - Find domain token based on given ITS ID
* @trans_id: ITS ID.
*
* Returns: domain token when find on the list, NULL otherwise
*/
struct fwnode_handle *iort_find_domain_token(int trans_id)
{
struct fwnode_handle *fw_node = NULL;
struct iort_its_msi_chip *its_msi_chip;
spin_lock(&iort_msi_chip_lock);
list_for_each_entry(its_msi_chip, &iort_msi_chip_list, list) {
if (its_msi_chip->translation_id == trans_id) {
fw_node = its_msi_chip->fw_node;
break;
}
}
spin_unlock(&iort_msi_chip_lock);
return fw_node;
}
ACPI: I/O Remapping Table (IORT) initial support IORT shows representation of IO topology for ARM based systems. It describes how various components are connected together on parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf Initial support allows to detect IORT table presence and save its root pointer obtained through acpi_get_table(). The pointer validity depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap is not set while using IORT nodes we would dereference unmapped pointers. For the aforementioned reason call acpi_iort_init() from acpi_init() which guarantees acpi_gbl_permanent_mmap to be set at that point. Add generic helpers which are helpful for scanning and retrieving information from IORT table content. List of the most important helpers: - iort_find_dev_node() finds IORT node for a given device - iort_node_map_rid() maps device RID and returns IORT node which provides final translation IORT support is placed under drivers/acpi/arm64/ new directory due to its ARM64 specific nature. The code there is considered only for ARM64. The long term plan is to keep all ARM64 specific tables support in this place e.g. GTDT table. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-12 12:54:20 -06:00
static struct acpi_iort_node *iort_scan_node(enum acpi_iort_node_type type,
iort_find_node_callback callback,
void *context)
{
struct acpi_iort_node *iort_node, *iort_end;
struct acpi_table_iort *iort;
int i;
if (!iort_table)
return NULL;
/* Get the first IORT node */
iort = (struct acpi_table_iort *)iort_table;
iort_node = ACPI_ADD_PTR(struct acpi_iort_node, iort,
iort->node_offset);
iort_end = ACPI_ADD_PTR(struct acpi_iort_node, iort_table,
iort_table->length);
for (i = 0; i < iort->node_count; i++) {
if (WARN_TAINT(iort_node >= iort_end, TAINT_FIRMWARE_WORKAROUND,
"IORT node pointer overflows, bad table!\n"))
return NULL;
if (iort_node->type == type &&
ACPI_SUCCESS(callback(iort_node, context)))
return iort_node;
ACPI: I/O Remapping Table (IORT) initial support IORT shows representation of IO topology for ARM based systems. It describes how various components are connected together on parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf Initial support allows to detect IORT table presence and save its root pointer obtained through acpi_get_table(). The pointer validity depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap is not set while using IORT nodes we would dereference unmapped pointers. For the aforementioned reason call acpi_iort_init() from acpi_init() which guarantees acpi_gbl_permanent_mmap to be set at that point. Add generic helpers which are helpful for scanning and retrieving information from IORT table content. List of the most important helpers: - iort_find_dev_node() finds IORT node for a given device - iort_node_map_rid() maps device RID and returns IORT node which provides final translation IORT support is placed under drivers/acpi/arm64/ new directory due to its ARM64 specific nature. The code there is considered only for ARM64. The long term plan is to keep all ARM64 specific tables support in this place e.g. GTDT table. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-12 12:54:20 -06:00
iort_node = ACPI_ADD_PTR(struct acpi_iort_node, iort_node,
iort_node->length);
}
return NULL;
}
static acpi_status iort_match_node_callback(struct acpi_iort_node *node,
void *context)
{
struct device *dev = context;
acpi_status status = AE_NOT_FOUND;
ACPI: I/O Remapping Table (IORT) initial support IORT shows representation of IO topology for ARM based systems. It describes how various components are connected together on parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf Initial support allows to detect IORT table presence and save its root pointer obtained through acpi_get_table(). The pointer validity depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap is not set while using IORT nodes we would dereference unmapped pointers. For the aforementioned reason call acpi_iort_init() from acpi_init() which guarantees acpi_gbl_permanent_mmap to be set at that point. Add generic helpers which are helpful for scanning and retrieving information from IORT table content. List of the most important helpers: - iort_find_dev_node() finds IORT node for a given device - iort_node_map_rid() maps device RID and returns IORT node which provides final translation IORT support is placed under drivers/acpi/arm64/ new directory due to its ARM64 specific nature. The code there is considered only for ARM64. The long term plan is to keep all ARM64 specific tables support in this place e.g. GTDT table. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-12 12:54:20 -06:00
if (node->type == ACPI_IORT_NODE_NAMED_COMPONENT) {
struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER, NULL };
struct acpi_device *adev = to_acpi_device_node(dev->fwnode);
struct acpi_iort_named_component *ncomp;
if (!adev)
ACPI: I/O Remapping Table (IORT) initial support IORT shows representation of IO topology for ARM based systems. It describes how various components are connected together on parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf Initial support allows to detect IORT table presence and save its root pointer obtained through acpi_get_table(). The pointer validity depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap is not set while using IORT nodes we would dereference unmapped pointers. For the aforementioned reason call acpi_iort_init() from acpi_init() which guarantees acpi_gbl_permanent_mmap to be set at that point. Add generic helpers which are helpful for scanning and retrieving information from IORT table content. List of the most important helpers: - iort_find_dev_node() finds IORT node for a given device - iort_node_map_rid() maps device RID and returns IORT node which provides final translation IORT support is placed under drivers/acpi/arm64/ new directory due to its ARM64 specific nature. The code there is considered only for ARM64. The long term plan is to keep all ARM64 specific tables support in this place e.g. GTDT table. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-12 12:54:20 -06:00
goto out;
status = acpi_get_name(adev->handle, ACPI_FULL_PATHNAME, &buf);
if (ACPI_FAILURE(status)) {
dev_warn(dev, "Can't get device full path name\n");
goto out;
}
ncomp = (struct acpi_iort_named_component *)node->node_data;
status = !strcmp(ncomp->device_name, buf.pointer) ?
AE_OK : AE_NOT_FOUND;
acpi_os_free(buf.pointer);
} else if (node->type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX) {
struct acpi_iort_root_complex *pci_rc;
struct pci_bus *bus;
bus = to_pci_bus(dev);
pci_rc = (struct acpi_iort_root_complex *)node->node_data;
/*
* It is assumed that PCI segment numbers maps one-to-one
* with root complexes. Each segment number can represent only
* one root complex.
*/
status = pci_rc->pci_segment_number == pci_domain_nr(bus) ?
AE_OK : AE_NOT_FOUND;
}
out:
return status;
}
static int iort_id_map(struct acpi_iort_id_mapping *map, u8 type, u32 rid_in,
u32 *rid_out)
{
/* Single mapping does not care for input id */
if (map->flags & ACPI_IORT_ID_SINGLE_MAPPING) {
if (type == ACPI_IORT_NODE_NAMED_COMPONENT ||
type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX) {
*rid_out = map->output_base;
return 0;
}
pr_warn(FW_BUG "[map %p] SINGLE MAPPING flag not allowed for node type %d, skipping ID map\n",
map, type);
return -ENXIO;
}
if (rid_in < map->input_base ||
(rid_in >= map->input_base + map->id_count))
return -ENXIO;
*rid_out = map->output_base + (rid_in - map->input_base);
return 0;
}
static struct acpi_iort_node *iort_node_get_id(struct acpi_iort_node *node,
u32 *id_out, int index)
{
struct acpi_iort_node *parent;
struct acpi_iort_id_mapping *map;
if (!node->mapping_offset || !node->mapping_count ||
index >= node->mapping_count)
return NULL;
map = ACPI_ADD_PTR(struct acpi_iort_id_mapping, node,
ACPI/IORT: Fix iort_node_get_id() mapping entries indexing Commit 618f535a6062 ("ACPI/IORT: Add single mapping function") introduced a function (iort_node_get_id()) to retrieve ids for IORT named components. The iort_node_get_id() takes an index as input to refer to a specific mapping entry in the named component IORT node mapping array. For a mapping entry at a given index, iort_node_get_id() should return the id value (through the id_out function parameter) and the IORT node output_reference (through function return value) the given mapping entry refers to. Technically output_reference values may differ for different map entries, (see diagram below - mapped id values may refer to different eg IORT SMMU nodes; the kernel may not be able to handle different output_reference values for a given named component but the IORT kernel layer should still report the IORT mappings as reported by firmware) but current code in iort_node_get_id() fails to use the index function parameter to return the correct output_reference value (ie it always returns the output_reference value of the first entry in the mapping array whilst using the index correctly to retrieve the id value from the respective entry). |----------------------| | named component | |----------------------| | map entry[0] | |----------------------| | id value | | output_reference----------------> eg SMMU 1 |----------------------| | map entry[1] | |----------------------| | id value | | output_reference----------------> eg SMMU 2 |----------------------| . . . |----------------------| | map entry[N] | |----------------------| | id value | | output_reference----------------> eg SMMU 1 |----------------------| Consequently the iort_node_get_id() function always returns the IORT node pointed at by the output_reference value of the first named component mapping array entry, irrespective of the index parameter, which is a bug. Update the map array entry pointer computation in iort_node_get_id() to take into account the index value, fixing the issue. Fixes: 618f535a6062 ("ACPI/IORT: Add single mapping function") Reported-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Sinan Kaya <okaya@codeaurora.org> Cc: Tomasz Nowicki <tn@semihalf.com> Cc: Nate Watterson <nwatters@codeaurora.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-01-05 10:32:16 -07:00
node->mapping_offset + index * sizeof(*map));
/* Firmware bug! */
if (!map->output_reference) {
pr_err(FW_BUG "[node %p type %d] ID map has NULL parent reference\n",
node, node->type);
return NULL;
}
parent = ACPI_ADD_PTR(struct acpi_iort_node, iort_table,
map->output_reference);
ACPI/IORT: Fix iort_node_get_id() mapping entries indexing Commit 618f535a6062 ("ACPI/IORT: Add single mapping function") introduced a function (iort_node_get_id()) to retrieve ids for IORT named components. The iort_node_get_id() takes an index as input to refer to a specific mapping entry in the named component IORT node mapping array. For a mapping entry at a given index, iort_node_get_id() should return the id value (through the id_out function parameter) and the IORT node output_reference (through function return value) the given mapping entry refers to. Technically output_reference values may differ for different map entries, (see diagram below - mapped id values may refer to different eg IORT SMMU nodes; the kernel may not be able to handle different output_reference values for a given named component but the IORT kernel layer should still report the IORT mappings as reported by firmware) but current code in iort_node_get_id() fails to use the index function parameter to return the correct output_reference value (ie it always returns the output_reference value of the first entry in the mapping array whilst using the index correctly to retrieve the id value from the respective entry). |----------------------| | named component | |----------------------| | map entry[0] | |----------------------| | id value | | output_reference----------------> eg SMMU 1 |----------------------| | map entry[1] | |----------------------| | id value | | output_reference----------------> eg SMMU 2 |----------------------| . . . |----------------------| | map entry[N] | |----------------------| | id value | | output_reference----------------> eg SMMU 1 |----------------------| Consequently the iort_node_get_id() function always returns the IORT node pointed at by the output_reference value of the first named component mapping array entry, irrespective of the index parameter, which is a bug. Update the map array entry pointer computation in iort_node_get_id() to take into account the index value, fixing the issue. Fixes: 618f535a6062 ("ACPI/IORT: Add single mapping function") Reported-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Sinan Kaya <okaya@codeaurora.org> Cc: Tomasz Nowicki <tn@semihalf.com> Cc: Nate Watterson <nwatters@codeaurora.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-01-05 10:32:16 -07:00
if (map->flags & ACPI_IORT_ID_SINGLE_MAPPING) {
if (node->type == ACPI_IORT_NODE_NAMED_COMPONENT ||
node->type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX ||
node->type == ACPI_IORT_NODE_SMMU_V3 ||
node->type == ACPI_IORT_NODE_PMCG) {
ACPI/IORT: Fix iort_node_get_id() mapping entries indexing Commit 618f535a6062 ("ACPI/IORT: Add single mapping function") introduced a function (iort_node_get_id()) to retrieve ids for IORT named components. The iort_node_get_id() takes an index as input to refer to a specific mapping entry in the named component IORT node mapping array. For a mapping entry at a given index, iort_node_get_id() should return the id value (through the id_out function parameter) and the IORT node output_reference (through function return value) the given mapping entry refers to. Technically output_reference values may differ for different map entries, (see diagram below - mapped id values may refer to different eg IORT SMMU nodes; the kernel may not be able to handle different output_reference values for a given named component but the IORT kernel layer should still report the IORT mappings as reported by firmware) but current code in iort_node_get_id() fails to use the index function parameter to return the correct output_reference value (ie it always returns the output_reference value of the first entry in the mapping array whilst using the index correctly to retrieve the id value from the respective entry). |----------------------| | named component | |----------------------| | map entry[0] | |----------------------| | id value | | output_reference----------------> eg SMMU 1 |----------------------| | map entry[1] | |----------------------| | id value | | output_reference----------------> eg SMMU 2 |----------------------| . . . |----------------------| | map entry[N] | |----------------------| | id value | | output_reference----------------> eg SMMU 1 |----------------------| Consequently the iort_node_get_id() function always returns the IORT node pointed at by the output_reference value of the first named component mapping array entry, irrespective of the index parameter, which is a bug. Update the map array entry pointer computation in iort_node_get_id() to take into account the index value, fixing the issue. Fixes: 618f535a6062 ("ACPI/IORT: Add single mapping function") Reported-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Sinan Kaya <okaya@codeaurora.org> Cc: Tomasz Nowicki <tn@semihalf.com> Cc: Nate Watterson <nwatters@codeaurora.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-01-05 10:32:16 -07:00
*id_out = map->output_base;
return parent;
}
}
return NULL;
}
static int iort_get_id_mapping_index(struct acpi_iort_node *node)
{
struct acpi_iort_smmu_v3 *smmu;
switch (node->type) {
case ACPI_IORT_NODE_SMMU_V3:
/*
* SMMUv3 dev ID mapping index was introduced in revision 1
* table, not available in revision 0
*/
if (node->revision < 1)
return -EINVAL;
smmu = (struct acpi_iort_smmu_v3 *)node->node_data;
/*
* ID mapping index is only ignored if all interrupts are
* GSIV based
*/
if (smmu->event_gsiv && smmu->pri_gsiv && smmu->gerr_gsiv
&& smmu->sync_gsiv)
return -EINVAL;
if (smmu->id_mapping_index >= node->mapping_count) {
pr_err(FW_BUG "[node %p type %d] ID mapping index overflows valid mappings\n",
node, node->type);
return -EINVAL;
}
return smmu->id_mapping_index;
case ACPI_IORT_NODE_PMCG:
return 0;
default:
return -EINVAL;
}
}
ACPI/IORT: Enable special index ITS group mappings for IORT nodes IORT revision C introduced SMMUv3 and PMCG MSI support by adding specific mapping entries in the SMMUv3/PMCG subtables to retrieve the device ID and the ITS group it maps to for a given SMMUv3/PMCG IORT node. Introduce a mapping function (ie iort_get_id_mapping_index()), that for a given IORT node looks up if an ITS specific ID mapping entry exists and if so retrieve the corresponding mapping index in the IORT node mapping array. Since an ITS specific index mapping can be present for an IORT node that is not a leaf node (eg SMMUv3 - to describe its own ITS device ID) special handling is required for two steps mapping cases such as PCI/NamedComponent--->SMMUv3--->ITS because the SMMUv3 ITS specific index mapping entry should be skipped to prevent the IORT API from considering the mapping entry as a regular mapping one. If we take the following IORT topology example: |----------------------| | Root Complex Node | |----------------------| | map entry[x] | |----------------------| | id value | | output_reference | |---|------------------| | | |----------------------| |-->| SMMUv3 | |----------------------| | SMMUv3 dev ID | | mapping index 0 | |----------------------| | map entry[0] | |----------------------| | id value | | output_reference-----------> ITS 1 (SMMU MSI domain) |----------------------| | map entry[1] | |----------------------| | id value | | output_reference-----------> ITS 2 (PCI MSI domain) |----------------------| where the SMMUv3 ITS specific mapping entry is index 0 and it represents the SMMUv3 ITS specific index mapping entry (describing its own ITS device ID), we need to skip that mapping entry while carrying out the Root Complex Node regular mappings to prevent erroneous translations. Reuse the iort_get_id_mapping_index() function to detect the ITS specific mapping index for a specific IORT node and skip it in the IORT mapping API (ie iort_node_map_id()) loop to prevent considering it a normal PCI/Named Component ID mapping entry. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> [lorenzo.pieralisi@arm.com: split patch/rewrote commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2017-10-13 01:09:48 -06:00
static struct acpi_iort_node *iort_node_map_id(struct acpi_iort_node *node,
u32 id_in, u32 *id_out,
u8 type_mask)
ACPI: I/O Remapping Table (IORT) initial support IORT shows representation of IO topology for ARM based systems. It describes how various components are connected together on parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf Initial support allows to detect IORT table presence and save its root pointer obtained through acpi_get_table(). The pointer validity depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap is not set while using IORT nodes we would dereference unmapped pointers. For the aforementioned reason call acpi_iort_init() from acpi_init() which guarantees acpi_gbl_permanent_mmap to be set at that point. Add generic helpers which are helpful for scanning and retrieving information from IORT table content. List of the most important helpers: - iort_find_dev_node() finds IORT node for a given device - iort_node_map_rid() maps device RID and returns IORT node which provides final translation IORT support is placed under drivers/acpi/arm64/ new directory due to its ARM64 specific nature. The code there is considered only for ARM64. The long term plan is to keep all ARM64 specific tables support in this place e.g. GTDT table. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-12 12:54:20 -06:00
{
u32 id = id_in;
ACPI: I/O Remapping Table (IORT) initial support IORT shows representation of IO topology for ARM based systems. It describes how various components are connected together on parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf Initial support allows to detect IORT table presence and save its root pointer obtained through acpi_get_table(). The pointer validity depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap is not set while using IORT nodes we would dereference unmapped pointers. For the aforementioned reason call acpi_iort_init() from acpi_init() which guarantees acpi_gbl_permanent_mmap to be set at that point. Add generic helpers which are helpful for scanning and retrieving information from IORT table content. List of the most important helpers: - iort_find_dev_node() finds IORT node for a given device - iort_node_map_rid() maps device RID and returns IORT node which provides final translation IORT support is placed under drivers/acpi/arm64/ new directory due to its ARM64 specific nature. The code there is considered only for ARM64. The long term plan is to keep all ARM64 specific tables support in this place e.g. GTDT table. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-12 12:54:20 -06:00
/* Parse the ID mapping tree to find specified node type */
while (node) {
struct acpi_iort_id_mapping *map;
ACPI/IORT: Enable special index ITS group mappings for IORT nodes IORT revision C introduced SMMUv3 and PMCG MSI support by adding specific mapping entries in the SMMUv3/PMCG subtables to retrieve the device ID and the ITS group it maps to for a given SMMUv3/PMCG IORT node. Introduce a mapping function (ie iort_get_id_mapping_index()), that for a given IORT node looks up if an ITS specific ID mapping entry exists and if so retrieve the corresponding mapping index in the IORT node mapping array. Since an ITS specific index mapping can be present for an IORT node that is not a leaf node (eg SMMUv3 - to describe its own ITS device ID) special handling is required for two steps mapping cases such as PCI/NamedComponent--->SMMUv3--->ITS because the SMMUv3 ITS specific index mapping entry should be skipped to prevent the IORT API from considering the mapping entry as a regular mapping one. If we take the following IORT topology example: |----------------------| | Root Complex Node | |----------------------| | map entry[x] | |----------------------| | id value | | output_reference | |---|------------------| | | |----------------------| |-->| SMMUv3 | |----------------------| | SMMUv3 dev ID | | mapping index 0 | |----------------------| | map entry[0] | |----------------------| | id value | | output_reference-----------> ITS 1 (SMMU MSI domain) |----------------------| | map entry[1] | |----------------------| | id value | | output_reference-----------> ITS 2 (PCI MSI domain) |----------------------| where the SMMUv3 ITS specific mapping entry is index 0 and it represents the SMMUv3 ITS specific index mapping entry (describing its own ITS device ID), we need to skip that mapping entry while carrying out the Root Complex Node regular mappings to prevent erroneous translations. Reuse the iort_get_id_mapping_index() function to detect the ITS specific mapping index for a specific IORT node and skip it in the IORT mapping API (ie iort_node_map_id()) loop to prevent considering it a normal PCI/Named Component ID mapping entry. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> [lorenzo.pieralisi@arm.com: split patch/rewrote commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2017-10-13 01:09:48 -06:00
int i, index;
ACPI: I/O Remapping Table (IORT) initial support IORT shows representation of IO topology for ARM based systems. It describes how various components are connected together on parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf Initial support allows to detect IORT table presence and save its root pointer obtained through acpi_get_table(). The pointer validity depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap is not set while using IORT nodes we would dereference unmapped pointers. For the aforementioned reason call acpi_iort_init() from acpi_init() which guarantees acpi_gbl_permanent_mmap to be set at that point. Add generic helpers which are helpful for scanning and retrieving information from IORT table content. List of the most important helpers: - iort_find_dev_node() finds IORT node for a given device - iort_node_map_rid() maps device RID and returns IORT node which provides final translation IORT support is placed under drivers/acpi/arm64/ new directory due to its ARM64 specific nature. The code there is considered only for ARM64. The long term plan is to keep all ARM64 specific tables support in this place e.g. GTDT table. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-12 12:54:20 -06:00
if (IORT_TYPE_MASK(node->type) & type_mask) {
if (id_out)
*id_out = id;
ACPI: I/O Remapping Table (IORT) initial support IORT shows representation of IO topology for ARM based systems. It describes how various components are connected together on parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf Initial support allows to detect IORT table presence and save its root pointer obtained through acpi_get_table(). The pointer validity depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap is not set while using IORT nodes we would dereference unmapped pointers. For the aforementioned reason call acpi_iort_init() from acpi_init() which guarantees acpi_gbl_permanent_mmap to be set at that point. Add generic helpers which are helpful for scanning and retrieving information from IORT table content. List of the most important helpers: - iort_find_dev_node() finds IORT node for a given device - iort_node_map_rid() maps device RID and returns IORT node which provides final translation IORT support is placed under drivers/acpi/arm64/ new directory due to its ARM64 specific nature. The code there is considered only for ARM64. The long term plan is to keep all ARM64 specific tables support in this place e.g. GTDT table. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-12 12:54:20 -06:00
return node;
}
if (!node->mapping_offset || !node->mapping_count)
goto fail_map;
map = ACPI_ADD_PTR(struct acpi_iort_id_mapping, node,
node->mapping_offset);
/* Firmware bug! */
if (!map->output_reference) {
pr_err(FW_BUG "[node %p type %d] ID map has NULL parent reference\n",
node, node->type);
goto fail_map;
}
ACPI/IORT: Enable special index ITS group mappings for IORT nodes IORT revision C introduced SMMUv3 and PMCG MSI support by adding specific mapping entries in the SMMUv3/PMCG subtables to retrieve the device ID and the ITS group it maps to for a given SMMUv3/PMCG IORT node. Introduce a mapping function (ie iort_get_id_mapping_index()), that for a given IORT node looks up if an ITS specific ID mapping entry exists and if so retrieve the corresponding mapping index in the IORT node mapping array. Since an ITS specific index mapping can be present for an IORT node that is not a leaf node (eg SMMUv3 - to describe its own ITS device ID) special handling is required for two steps mapping cases such as PCI/NamedComponent--->SMMUv3--->ITS because the SMMUv3 ITS specific index mapping entry should be skipped to prevent the IORT API from considering the mapping entry as a regular mapping one. If we take the following IORT topology example: |----------------------| | Root Complex Node | |----------------------| | map entry[x] | |----------------------| | id value | | output_reference | |---|------------------| | | |----------------------| |-->| SMMUv3 | |----------------------| | SMMUv3 dev ID | | mapping index 0 | |----------------------| | map entry[0] | |----------------------| | id value | | output_reference-----------> ITS 1 (SMMU MSI domain) |----------------------| | map entry[1] | |----------------------| | id value | | output_reference-----------> ITS 2 (PCI MSI domain) |----------------------| where the SMMUv3 ITS specific mapping entry is index 0 and it represents the SMMUv3 ITS specific index mapping entry (describing its own ITS device ID), we need to skip that mapping entry while carrying out the Root Complex Node regular mappings to prevent erroneous translations. Reuse the iort_get_id_mapping_index() function to detect the ITS specific mapping index for a specific IORT node and skip it in the IORT mapping API (ie iort_node_map_id()) loop to prevent considering it a normal PCI/Named Component ID mapping entry. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> [lorenzo.pieralisi@arm.com: split patch/rewrote commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2017-10-13 01:09:48 -06:00
/*
* Get the special ID mapping index (if any) and skip its
* associated ID map to prevent erroneous multi-stage
* IORT ID translations.
*/
index = iort_get_id_mapping_index(node);
/* Do the ID translation */
ACPI: I/O Remapping Table (IORT) initial support IORT shows representation of IO topology for ARM based systems. It describes how various components are connected together on parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf Initial support allows to detect IORT table presence and save its root pointer obtained through acpi_get_table(). The pointer validity depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap is not set while using IORT nodes we would dereference unmapped pointers. For the aforementioned reason call acpi_iort_init() from acpi_init() which guarantees acpi_gbl_permanent_mmap to be set at that point. Add generic helpers which are helpful for scanning and retrieving information from IORT table content. List of the most important helpers: - iort_find_dev_node() finds IORT node for a given device - iort_node_map_rid() maps device RID and returns IORT node which provides final translation IORT support is placed under drivers/acpi/arm64/ new directory due to its ARM64 specific nature. The code there is considered only for ARM64. The long term plan is to keep all ARM64 specific tables support in this place e.g. GTDT table. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-12 12:54:20 -06:00
for (i = 0; i < node->mapping_count; i++, map++) {
ACPI/IORT: Enable special index ITS group mappings for IORT nodes IORT revision C introduced SMMUv3 and PMCG MSI support by adding specific mapping entries in the SMMUv3/PMCG subtables to retrieve the device ID and the ITS group it maps to for a given SMMUv3/PMCG IORT node. Introduce a mapping function (ie iort_get_id_mapping_index()), that for a given IORT node looks up if an ITS specific ID mapping entry exists and if so retrieve the corresponding mapping index in the IORT node mapping array. Since an ITS specific index mapping can be present for an IORT node that is not a leaf node (eg SMMUv3 - to describe its own ITS device ID) special handling is required for two steps mapping cases such as PCI/NamedComponent--->SMMUv3--->ITS because the SMMUv3 ITS specific index mapping entry should be skipped to prevent the IORT API from considering the mapping entry as a regular mapping one. If we take the following IORT topology example: |----------------------| | Root Complex Node | |----------------------| | map entry[x] | |----------------------| | id value | | output_reference | |---|------------------| | | |----------------------| |-->| SMMUv3 | |----------------------| | SMMUv3 dev ID | | mapping index 0 | |----------------------| | map entry[0] | |----------------------| | id value | | output_reference-----------> ITS 1 (SMMU MSI domain) |----------------------| | map entry[1] | |----------------------| | id value | | output_reference-----------> ITS 2 (PCI MSI domain) |----------------------| where the SMMUv3 ITS specific mapping entry is index 0 and it represents the SMMUv3 ITS specific index mapping entry (describing its own ITS device ID), we need to skip that mapping entry while carrying out the Root Complex Node regular mappings to prevent erroneous translations. Reuse the iort_get_id_mapping_index() function to detect the ITS specific mapping index for a specific IORT node and skip it in the IORT mapping API (ie iort_node_map_id()) loop to prevent considering it a normal PCI/Named Component ID mapping entry. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> [lorenzo.pieralisi@arm.com: split patch/rewrote commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2017-10-13 01:09:48 -06:00
/* if it is special mapping index, skip it */
if (i == index)
continue;
if (!iort_id_map(map, node->type, id, &id))
ACPI: I/O Remapping Table (IORT) initial support IORT shows representation of IO topology for ARM based systems. It describes how various components are connected together on parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf Initial support allows to detect IORT table presence and save its root pointer obtained through acpi_get_table(). The pointer validity depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap is not set while using IORT nodes we would dereference unmapped pointers. For the aforementioned reason call acpi_iort_init() from acpi_init() which guarantees acpi_gbl_permanent_mmap to be set at that point. Add generic helpers which are helpful for scanning and retrieving information from IORT table content. List of the most important helpers: - iort_find_dev_node() finds IORT node for a given device - iort_node_map_rid() maps device RID and returns IORT node which provides final translation IORT support is placed under drivers/acpi/arm64/ new directory due to its ARM64 specific nature. The code there is considered only for ARM64. The long term plan is to keep all ARM64 specific tables support in this place e.g. GTDT table. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-12 12:54:20 -06:00
break;
}
if (i == node->mapping_count)
goto fail_map;
node = ACPI_ADD_PTR(struct acpi_iort_node, iort_table,
map->output_reference);
}
fail_map:
/* Map input ID to output ID unchanged on mapping failure */
if (id_out)
*id_out = id_in;
ACPI: I/O Remapping Table (IORT) initial support IORT shows representation of IO topology for ARM based systems. It describes how various components are connected together on parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf Initial support allows to detect IORT table presence and save its root pointer obtained through acpi_get_table(). The pointer validity depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap is not set while using IORT nodes we would dereference unmapped pointers. For the aforementioned reason call acpi_iort_init() from acpi_init() which guarantees acpi_gbl_permanent_mmap to be set at that point. Add generic helpers which are helpful for scanning and retrieving information from IORT table content. List of the most important helpers: - iort_find_dev_node() finds IORT node for a given device - iort_node_map_rid() maps device RID and returns IORT node which provides final translation IORT support is placed under drivers/acpi/arm64/ new directory due to its ARM64 specific nature. The code there is considered only for ARM64. The long term plan is to keep all ARM64 specific tables support in this place e.g. GTDT table. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-12 12:54:20 -06:00
return NULL;
}
static struct acpi_iort_node *iort_node_map_platform_id(
struct acpi_iort_node *node, u32 *id_out, u8 type_mask,
int index)
{
struct acpi_iort_node *parent;
u32 id;
/* step 1: retrieve the initial dev id */
parent = iort_node_get_id(node, &id, index);
if (!parent)
return NULL;
/*
* optional step 2: map the initial dev id if its parent is not
* the target type we want, map it again for the use cases such
* as NC (named component) -> SMMU -> ITS. If the type is matched,
* return the initial dev id and its parent pointer directly.
*/
if (!(IORT_TYPE_MASK(parent->type) & type_mask))
parent = iort_node_map_id(parent, id, id_out, type_mask);
else
if (id_out)
*id_out = id;
return parent;
}
ACPI: I/O Remapping Table (IORT) initial support IORT shows representation of IO topology for ARM based systems. It describes how various components are connected together on parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf Initial support allows to detect IORT table presence and save its root pointer obtained through acpi_get_table(). The pointer validity depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap is not set while using IORT nodes we would dereference unmapped pointers. For the aforementioned reason call acpi_iort_init() from acpi_init() which guarantees acpi_gbl_permanent_mmap to be set at that point. Add generic helpers which are helpful for scanning and retrieving information from IORT table content. List of the most important helpers: - iort_find_dev_node() finds IORT node for a given device - iort_node_map_rid() maps device RID and returns IORT node which provides final translation IORT support is placed under drivers/acpi/arm64/ new directory due to its ARM64 specific nature. The code there is considered only for ARM64. The long term plan is to keep all ARM64 specific tables support in this place e.g. GTDT table. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-12 12:54:20 -06:00
static struct acpi_iort_node *iort_find_dev_node(struct device *dev)
{
struct pci_bus *pbus;
if (!dev_is_pci(dev)) {
struct acpi_iort_node *node;
/*
* scan iort_fwnode_list to see if it's an iort platform
* device (such as SMMU, PMCG),its iort node already cached
* and associated with fwnode when iort platform devices
* were initialized.
*/
node = iort_get_iort_node(dev->fwnode);
if (node)
return node;
/*
* if not, then it should be a platform device defined in
* DSDT/SSDT (with Named Component node in IORT)
*/
ACPI: I/O Remapping Table (IORT) initial support IORT shows representation of IO topology for ARM based systems. It describes how various components are connected together on parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf Initial support allows to detect IORT table presence and save its root pointer obtained through acpi_get_table(). The pointer validity depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap is not set while using IORT nodes we would dereference unmapped pointers. For the aforementioned reason call acpi_iort_init() from acpi_init() which guarantees acpi_gbl_permanent_mmap to be set at that point. Add generic helpers which are helpful for scanning and retrieving information from IORT table content. List of the most important helpers: - iort_find_dev_node() finds IORT node for a given device - iort_node_map_rid() maps device RID and returns IORT node which provides final translation IORT support is placed under drivers/acpi/arm64/ new directory due to its ARM64 specific nature. The code there is considered only for ARM64. The long term plan is to keep all ARM64 specific tables support in this place e.g. GTDT table. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-12 12:54:20 -06:00
return iort_scan_node(ACPI_IORT_NODE_NAMED_COMPONENT,
iort_match_node_callback, dev);
}
ACPI: I/O Remapping Table (IORT) initial support IORT shows representation of IO topology for ARM based systems. It describes how various components are connected together on parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf Initial support allows to detect IORT table presence and save its root pointer obtained through acpi_get_table(). The pointer validity depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap is not set while using IORT nodes we would dereference unmapped pointers. For the aforementioned reason call acpi_iort_init() from acpi_init() which guarantees acpi_gbl_permanent_mmap to be set at that point. Add generic helpers which are helpful for scanning and retrieving information from IORT table content. List of the most important helpers: - iort_find_dev_node() finds IORT node for a given device - iort_node_map_rid() maps device RID and returns IORT node which provides final translation IORT support is placed under drivers/acpi/arm64/ new directory due to its ARM64 specific nature. The code there is considered only for ARM64. The long term plan is to keep all ARM64 specific tables support in this place e.g. GTDT table. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-12 12:54:20 -06:00
/* Find a PCI root bus */
pbus = to_pci_dev(dev)->bus;
while (!pci_is_root_bus(pbus))
pbus = pbus->parent;
return iort_scan_node(ACPI_IORT_NODE_PCI_ROOT_COMPLEX,
iort_match_node_callback, &pbus->dev);
}
/**
* iort_msi_map_rid() - Map a MSI requester ID for a device
* @dev: The device for which the mapping is to be done.
* @req_id: The device requester ID.
*
* Returns: mapped MSI RID on success, input requester ID otherwise
*/
u32 iort_msi_map_rid(struct device *dev, u32 req_id)
{
struct acpi_iort_node *node;
u32 dev_id;
node = iort_find_dev_node(dev);
if (!node)
return req_id;
iort_node_map_id(node, req_id, &dev_id, IORT_MSI_TYPE);
return dev_id;
}
/**
* iort_pmsi_get_dev_id() - Get the device id for a device
* @dev: The device for which the mapping is to be done.
* @dev_id: The device ID found.
*
* Returns: 0 for successful find a dev id, -ENODEV on error
*/
int iort_pmsi_get_dev_id(struct device *dev, u32 *dev_id)
{
ACPI/IORT: Enable special index ITS group mappings for IORT nodes IORT revision C introduced SMMUv3 and PMCG MSI support by adding specific mapping entries in the SMMUv3/PMCG subtables to retrieve the device ID and the ITS group it maps to for a given SMMUv3/PMCG IORT node. Introduce a mapping function (ie iort_get_id_mapping_index()), that for a given IORT node looks up if an ITS specific ID mapping entry exists and if so retrieve the corresponding mapping index in the IORT node mapping array. Since an ITS specific index mapping can be present for an IORT node that is not a leaf node (eg SMMUv3 - to describe its own ITS device ID) special handling is required for two steps mapping cases such as PCI/NamedComponent--->SMMUv3--->ITS because the SMMUv3 ITS specific index mapping entry should be skipped to prevent the IORT API from considering the mapping entry as a regular mapping one. If we take the following IORT topology example: |----------------------| | Root Complex Node | |----------------------| | map entry[x] | |----------------------| | id value | | output_reference | |---|------------------| | | |----------------------| |-->| SMMUv3 | |----------------------| | SMMUv3 dev ID | | mapping index 0 | |----------------------| | map entry[0] | |----------------------| | id value | | output_reference-----------> ITS 1 (SMMU MSI domain) |----------------------| | map entry[1] | |----------------------| | id value | | output_reference-----------> ITS 2 (PCI MSI domain) |----------------------| where the SMMUv3 ITS specific mapping entry is index 0 and it represents the SMMUv3 ITS specific index mapping entry (describing its own ITS device ID), we need to skip that mapping entry while carrying out the Root Complex Node regular mappings to prevent erroneous translations. Reuse the iort_get_id_mapping_index() function to detect the ITS specific mapping index for a specific IORT node and skip it in the IORT mapping API (ie iort_node_map_id()) loop to prevent considering it a normal PCI/Named Component ID mapping entry. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> [lorenzo.pieralisi@arm.com: split patch/rewrote commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2017-10-13 01:09:48 -06:00
int i, index;
struct acpi_iort_node *node;
node = iort_find_dev_node(dev);
if (!node)
return -ENODEV;
ACPI/IORT: Enable special index ITS group mappings for IORT nodes IORT revision C introduced SMMUv3 and PMCG MSI support by adding specific mapping entries in the SMMUv3/PMCG subtables to retrieve the device ID and the ITS group it maps to for a given SMMUv3/PMCG IORT node. Introduce a mapping function (ie iort_get_id_mapping_index()), that for a given IORT node looks up if an ITS specific ID mapping entry exists and if so retrieve the corresponding mapping index in the IORT node mapping array. Since an ITS specific index mapping can be present for an IORT node that is not a leaf node (eg SMMUv3 - to describe its own ITS device ID) special handling is required for two steps mapping cases such as PCI/NamedComponent--->SMMUv3--->ITS because the SMMUv3 ITS specific index mapping entry should be skipped to prevent the IORT API from considering the mapping entry as a regular mapping one. If we take the following IORT topology example: |----------------------| | Root Complex Node | |----------------------| | map entry[x] | |----------------------| | id value | | output_reference | |---|------------------| | | |----------------------| |-->| SMMUv3 | |----------------------| | SMMUv3 dev ID | | mapping index 0 | |----------------------| | map entry[0] | |----------------------| | id value | | output_reference-----------> ITS 1 (SMMU MSI domain) |----------------------| | map entry[1] | |----------------------| | id value | | output_reference-----------> ITS 2 (PCI MSI domain) |----------------------| where the SMMUv3 ITS specific mapping entry is index 0 and it represents the SMMUv3 ITS specific index mapping entry (describing its own ITS device ID), we need to skip that mapping entry while carrying out the Root Complex Node regular mappings to prevent erroneous translations. Reuse the iort_get_id_mapping_index() function to detect the ITS specific mapping index for a specific IORT node and skip it in the IORT mapping API (ie iort_node_map_id()) loop to prevent considering it a normal PCI/Named Component ID mapping entry. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> [lorenzo.pieralisi@arm.com: split patch/rewrote commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2017-10-13 01:09:48 -06:00
index = iort_get_id_mapping_index(node);
/* if there is a valid index, go get the dev_id directly */
if (index >= 0) {
if (iort_node_get_id(node, dev_id, index))
return 0;
ACPI/IORT: Enable special index ITS group mappings for IORT nodes IORT revision C introduced SMMUv3 and PMCG MSI support by adding specific mapping entries in the SMMUv3/PMCG subtables to retrieve the device ID and the ITS group it maps to for a given SMMUv3/PMCG IORT node. Introduce a mapping function (ie iort_get_id_mapping_index()), that for a given IORT node looks up if an ITS specific ID mapping entry exists and if so retrieve the corresponding mapping index in the IORT node mapping array. Since an ITS specific index mapping can be present for an IORT node that is not a leaf node (eg SMMUv3 - to describe its own ITS device ID) special handling is required for two steps mapping cases such as PCI/NamedComponent--->SMMUv3--->ITS because the SMMUv3 ITS specific index mapping entry should be skipped to prevent the IORT API from considering the mapping entry as a regular mapping one. If we take the following IORT topology example: |----------------------| | Root Complex Node | |----------------------| | map entry[x] | |----------------------| | id value | | output_reference | |---|------------------| | | |----------------------| |-->| SMMUv3 | |----------------------| | SMMUv3 dev ID | | mapping index 0 | |----------------------| | map entry[0] | |----------------------| | id value | | output_reference-----------> ITS 1 (SMMU MSI domain) |----------------------| | map entry[1] | |----------------------| | id value | | output_reference-----------> ITS 2 (PCI MSI domain) |----------------------| where the SMMUv3 ITS specific mapping entry is index 0 and it represents the SMMUv3 ITS specific index mapping entry (describing its own ITS device ID), we need to skip that mapping entry while carrying out the Root Complex Node regular mappings to prevent erroneous translations. Reuse the iort_get_id_mapping_index() function to detect the ITS specific mapping index for a specific IORT node and skip it in the IORT mapping API (ie iort_node_map_id()) loop to prevent considering it a normal PCI/Named Component ID mapping entry. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> [lorenzo.pieralisi@arm.com: split patch/rewrote commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2017-10-13 01:09:48 -06:00
} else {
for (i = 0; i < node->mapping_count; i++) {
if (iort_node_map_platform_id(node, dev_id,
IORT_MSI_TYPE, i))
return 0;
}
}
return -ENODEV;
}
static int __maybe_unused iort_find_its_base(u32 its_id, phys_addr_t *base)
{
struct iort_its_msi_chip *its_msi_chip;
int ret = -ENODEV;
spin_lock(&iort_msi_chip_lock);
list_for_each_entry(its_msi_chip, &iort_msi_chip_list, list) {
if (its_msi_chip->translation_id == its_id) {
*base = its_msi_chip->base_addr;
ret = 0;
break;
}
}
spin_unlock(&iort_msi_chip_lock);
return ret;
}
/**
* iort_dev_find_its_id() - Find the ITS identifier for a device
* @dev: The device.
* @req_id: Device's requester ID
* @idx: Index of the ITS identifier list.
* @its_id: ITS identifier.
*
* Returns: 0 on success, appropriate error value otherwise
*/
static int iort_dev_find_its_id(struct device *dev, u32 req_id,
unsigned int idx, int *its_id)
{
struct acpi_iort_its_group *its;
struct acpi_iort_node *node;
node = iort_find_dev_node(dev);
if (!node)
return -ENXIO;
node = iort_node_map_id(node, req_id, NULL, IORT_MSI_TYPE);
if (!node)
return -ENXIO;
/* Move to ITS specific data */
its = (struct acpi_iort_its_group *)node->node_data;
if (idx > its->its_count) {
dev_err(dev, "requested ITS ID index [%d] is greater than available [%d]\n",
idx, its->its_count);
return -ENXIO;
}
*its_id = its->identifiers[idx];
return 0;
}
/**
* iort_get_device_domain() - Find MSI domain related to a device
* @dev: The device.
* @req_id: Requester ID for the device.
*
* Returns: the MSI domain for this device, NULL otherwise
*/
struct irq_domain *iort_get_device_domain(struct device *dev, u32 req_id)
{
struct fwnode_handle *handle;
int its_id;
if (iort_dev_find_its_id(dev, req_id, 0, &its_id))
return NULL;
handle = iort_find_domain_token(its_id);
if (!handle)
return NULL;
return irq_find_matching_fwnode(handle, DOMAIN_BUS_PCI_MSI);
}
static void iort_set_device_domain(struct device *dev,
struct acpi_iort_node *node)
{
struct acpi_iort_its_group *its;
struct acpi_iort_node *msi_parent;
struct acpi_iort_id_mapping *map;
struct fwnode_handle *iort_fwnode;
struct irq_domain *domain;
int index;
index = iort_get_id_mapping_index(node);
if (index < 0)
return;
map = ACPI_ADD_PTR(struct acpi_iort_id_mapping, node,
node->mapping_offset + index * sizeof(*map));
/* Firmware bug! */
if (!map->output_reference ||
!(map->flags & ACPI_IORT_ID_SINGLE_MAPPING)) {
pr_err(FW_BUG "[node %p type %d] Invalid MSI mapping\n",
node, node->type);
return;
}
msi_parent = ACPI_ADD_PTR(struct acpi_iort_node, iort_table,
map->output_reference);
if (!msi_parent || msi_parent->type != ACPI_IORT_NODE_ITS_GROUP)
return;
/* Move to ITS specific data */
its = (struct acpi_iort_its_group *)msi_parent->node_data;
iort_fwnode = iort_find_domain_token(its->identifiers[0]);
if (!iort_fwnode)
return;
domain = irq_find_matching_fwnode(iort_fwnode, DOMAIN_BUS_PLATFORM_MSI);
if (domain)
dev_set_msi_domain(dev, domain);
}
/**
* iort_get_platform_device_domain() - Find MSI domain related to a
* platform device
* @dev: the dev pointer associated with the platform device
*
* Returns: the MSI domain for this device, NULL otherwise
*/
static struct irq_domain *iort_get_platform_device_domain(struct device *dev)
{
struct acpi_iort_node *node, *msi_parent = NULL;
struct fwnode_handle *iort_fwnode;
struct acpi_iort_its_group *its;
int i;
/* find its associated iort node */
node = iort_scan_node(ACPI_IORT_NODE_NAMED_COMPONENT,
iort_match_node_callback, dev);
if (!node)
return NULL;
/* then find its msi parent node */
for (i = 0; i < node->mapping_count; i++) {
msi_parent = iort_node_map_platform_id(node, NULL,
IORT_MSI_TYPE, i);
if (msi_parent)
break;
}
if (!msi_parent)
return NULL;
/* Move to ITS specific data */
its = (struct acpi_iort_its_group *)msi_parent->node_data;
iort_fwnode = iort_find_domain_token(its->identifiers[0]);
if (!iort_fwnode)
return NULL;
return irq_find_matching_fwnode(iort_fwnode, DOMAIN_BUS_PLATFORM_MSI);
}
void acpi_configure_pmsi_domain(struct device *dev)
{
struct irq_domain *msi_domain;
msi_domain = iort_get_platform_device_domain(dev);
if (msi_domain)
dev_set_msi_domain(dev, msi_domain);
}
static int __maybe_unused __get_pci_rid(struct pci_dev *pdev, u16 alias,
void *data)
{
u32 *rid = data;
*rid = alias;
return 0;
}
#ifdef CONFIG_IOMMU_API
static struct acpi_iort_node *iort_get_msi_resv_iommu(struct device *dev)
{
struct acpi_iort_node *iommu;
struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
iommu = iort_get_iort_node(fwspec->iommu_fwnode);
if (iommu && (iommu->type == ACPI_IORT_NODE_SMMU_V3)) {
struct acpi_iort_smmu_v3 *smmu;
smmu = (struct acpi_iort_smmu_v3 *)iommu->node_data;
if (smmu->model == ACPI_IORT_SMMU_V3_HISILICON_HI161X)
return iommu;
}
return NULL;
}
static inline const struct iommu_ops *iort_fwspec_iommu_ops(struct device *dev)
{
struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
return (fwspec && fwspec->ops) ? fwspec->ops : NULL;
}
static inline int iort_add_device_replay(const struct iommu_ops *ops,
struct device *dev)
{
int err = 0;
if (dev->bus && !device_iommu_mapped(dev))
err = iommu_probe_device(dev);
return err;
}
/**
* iort_iommu_msi_get_resv_regions - Reserved region driver helper
* @dev: Device from iommu_get_resv_regions()
* @head: Reserved region list from iommu_get_resv_regions()
*
* Returns: Number of msi reserved regions on success (0 if platform
* doesn't require the reservation or no associated msi regions),
* appropriate error value otherwise. The ITS interrupt translation
* spaces (ITS_base + SZ_64K, SZ_64K) associated with the device
* are the msi reserved regions.
*/
int iort_iommu_msi_get_resv_regions(struct device *dev, struct list_head *head)
{
struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
struct acpi_iort_its_group *its;
struct acpi_iort_node *iommu_node, *its_node = NULL;
int i, resv = 0;
iommu_node = iort_get_msi_resv_iommu(dev);
if (!iommu_node)
return 0;
/*
* Current logic to reserve ITS regions relies on HW topologies
* where a given PCI or named component maps its IDs to only one
* ITS group; if a PCI or named component can map its IDs to
* different ITS groups through IORT mappings this function has
* to be reworked to ensure we reserve regions for all ITS groups
* a given PCI or named component may map IDs to.
*/
for (i = 0; i < fwspec->num_ids; i++) {
its_node = iort_node_map_id(iommu_node,
fwspec->ids[i],
NULL, IORT_MSI_TYPE);
if (its_node)
break;
}
if (!its_node)
return 0;
/* Move to ITS specific data */
its = (struct acpi_iort_its_group *)its_node->node_data;
for (i = 0; i < its->its_count; i++) {
phys_addr_t base;
if (!iort_find_its_base(its->identifiers[i], &base)) {
int prot = IOMMU_WRITE | IOMMU_NOEXEC | IOMMU_MMIO;
struct iommu_resv_region *region;
region = iommu_alloc_resv_region(base + SZ_64K, SZ_64K,
prot, IOMMU_RESV_MSI);
if (region) {
list_add_tail(&region->list, head);
resv++;
}
}
}
return (resv == its->its_count) ? resv : -ENODEV;
}
static inline bool iort_iommu_driver_enabled(u8 type)
{
switch (type) {
case ACPI_IORT_NODE_SMMU_V3:
return IS_BUILTIN(CONFIG_ARM_SMMU_V3);
case ACPI_IORT_NODE_SMMU:
return IS_BUILTIN(CONFIG_ARM_SMMU);
default:
pr_warn("IORT node type %u does not describe an SMMU\n", type);
return false;
}
}
static int arm_smmu_iort_xlate(struct device *dev, u32 streamid,
struct fwnode_handle *fwnode,
const struct iommu_ops *ops)
{
int ret = iommu_fwspec_init(dev, fwnode, ops);
if (!ret)
ret = iommu_fwspec_add_ids(dev, &streamid, 1);
return ret;
}
static bool iort_pci_rc_supports_ats(struct acpi_iort_node *node)
{
struct acpi_iort_root_complex *pci_rc;
pci_rc = (struct acpi_iort_root_complex *)node->node_data;
return pci_rc->ats_attribute & ACPI_IORT_ATS_SUPPORTED;
}
static int iort_iommu_xlate(struct device *dev, struct acpi_iort_node *node,
u32 streamid)
{
const struct iommu_ops *ops;
struct fwnode_handle *iort_fwnode;
if (!node)
return -ENODEV;
iort_fwnode = iort_get_fwnode(node);
if (!iort_fwnode)
return -ENODEV;
/*
* If the ops look-up fails, this means that either
* the SMMU drivers have not been probed yet or that
* the SMMU drivers are not built in the kernel;
* Depending on whether the SMMU drivers are built-in
* in the kernel or not, defer the IOMMU configuration
* or just abort it.
*/
ops = iommu_ops_from_fwnode(iort_fwnode);
if (!ops)
return iort_iommu_driver_enabled(node->type) ?
-EPROBE_DEFER : -ENODEV;
return arm_smmu_iort_xlate(dev, streamid, iort_fwnode, ops);
}
struct iort_pci_alias_info {
struct device *dev;
struct acpi_iort_node *node;
};
static int iort_pci_iommu_init(struct pci_dev *pdev, u16 alias, void *data)
{
struct iort_pci_alias_info *info = data;
struct acpi_iort_node *parent;
u32 streamid;
parent = iort_node_map_id(info->node, alias, &streamid,
IORT_IOMMU_TYPE);
return iort_iommu_xlate(info->dev, parent, streamid);
}
/**
* iort_iommu_configure - Set-up IOMMU configuration for a device.
*
* @dev: device to configure
*
* Returns: iommu_ops pointer on configuration success
* NULL on configuration failure
*/
const struct iommu_ops *iort_iommu_configure(struct device *dev)
{
struct acpi_iort_node *node, *parent;
const struct iommu_ops *ops;
u32 streamid = 0;
int err = -ENODEV;
/*
* If we already translated the fwspec there
* is nothing left to do, return the iommu_ops.
*/
ops = iort_fwspec_iommu_ops(dev);
if (ops)
return ops;
if (dev_is_pci(dev)) {
struct pci_bus *bus = to_pci_dev(dev)->bus;
struct iort_pci_alias_info info = { .dev = dev };
node = iort_scan_node(ACPI_IORT_NODE_PCI_ROOT_COMPLEX,
iort_match_node_callback, &bus->dev);
if (!node)
return NULL;
info.node = node;
err = pci_for_each_dma_alias(to_pci_dev(dev),
iort_pci_iommu_init, &info);
if (!err && iort_pci_rc_supports_ats(node))
dev->iommu_fwspec->flags |= IOMMU_FWSPEC_PCI_RC_ATS;
} else {
int i = 0;
node = iort_scan_node(ACPI_IORT_NODE_NAMED_COMPONENT,
iort_match_node_callback, dev);
if (!node)
return NULL;
do {
parent = iort_node_map_platform_id(node, &streamid,
IORT_IOMMU_TYPE,
i++);
if (parent)
err = iort_iommu_xlate(dev, parent, streamid);
} while (parent && !err);
}
/*
* If we have reason to believe the IOMMU driver missed the initial
* add_device callback for dev, replay it to get things in order.
*/
if (!err) {
ops = iort_fwspec_iommu_ops(dev);
err = iort_add_device_replay(ops, dev);
}
/* Ignore all other errors apart from EPROBE_DEFER */
if (err == -EPROBE_DEFER) {
ops = ERR_PTR(err);
} else if (err) {
dev_dbg(dev, "Adding to IOMMU failed: %d\n", err);
ops = NULL;
}
return ops;
}
#else
static inline const struct iommu_ops *iort_fwspec_iommu_ops(struct device *dev)
{ return NULL; }
static inline int iort_add_device_replay(const struct iommu_ops *ops,
struct device *dev)
{ return 0; }
int iort_iommu_msi_get_resv_regions(struct device *dev, struct list_head *head)
{ return 0; }
const struct iommu_ops *iort_iommu_configure(struct device *dev)
{ return NULL; }
#endif
static int nc_dma_get_range(struct device *dev, u64 *size)
{
struct acpi_iort_node *node;
struct acpi_iort_named_component *ncomp;
node = iort_scan_node(ACPI_IORT_NODE_NAMED_COMPONENT,
iort_match_node_callback, dev);
if (!node)
return -ENODEV;
ncomp = (struct acpi_iort_named_component *)node->node_data;
*size = ncomp->memory_address_limit >= 64 ? U64_MAX :
1ULL<<ncomp->memory_address_limit;
return 0;
}
static int rc_dma_get_range(struct device *dev, u64 *size)
{
struct acpi_iort_node *node;
struct acpi_iort_root_complex *rc;
struct pci_bus *pbus = to_pci_dev(dev)->bus;
node = iort_scan_node(ACPI_IORT_NODE_PCI_ROOT_COMPLEX,
iort_match_node_callback, &pbus->dev);
if (!node || node->revision < 1)
return -ENODEV;
rc = (struct acpi_iort_root_complex *)node->node_data;
*size = rc->memory_address_limit >= 64 ? U64_MAX :
1ULL<<rc->memory_address_limit;
return 0;
}
ACPI/IORT: Make dma masks set-up IORT specific The introduction of acpi_dma_configure() allows to configure DMA and related IOMMU for any device that is DMA capable. To achieve that goal it ensures DMA masks are set-up to sane default values before proceeding with IOMMU and DMA ops configuration. On x86/ia64 systems, through acpi_bind_one(), acpi_dma_configure() is called for every device that has an ACPI companion, in that every device is considered DMA capable on x86/ia64 systems (ie acpi_get_dma_attr() API), which has the side effect of initializing dma masks also for pseudo-devices (eg CPUs and memory nodes) and potentially for devices whose dma masks were not set-up before the acpi_dma_configure() API was introduced, which may have noxious side effects. Therefore, in preparation for IORT firmware specific DMA masks set-up, wrap the default DMA masks set-up in acpi_dma_configure() inside an IORT specific wrapper that reverts to a NOP on x86/ia64 systems, restoring the default expected behaviour on x86/ia64 systems and keeping DMA default masks set-up on IORT based (ie ARM) arch configurations. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Tomasz Nowicki <tn@semihalf.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-12-06 07:20:11 -07:00
/**
* iort_dma_setup() - Set-up device DMA parameters.
ACPI/IORT: Make dma masks set-up IORT specific The introduction of acpi_dma_configure() allows to configure DMA and related IOMMU for any device that is DMA capable. To achieve that goal it ensures DMA masks are set-up to sane default values before proceeding with IOMMU and DMA ops configuration. On x86/ia64 systems, through acpi_bind_one(), acpi_dma_configure() is called for every device that has an ACPI companion, in that every device is considered DMA capable on x86/ia64 systems (ie acpi_get_dma_attr() API), which has the side effect of initializing dma masks also for pseudo-devices (eg CPUs and memory nodes) and potentially for devices whose dma masks were not set-up before the acpi_dma_configure() API was introduced, which may have noxious side effects. Therefore, in preparation for IORT firmware specific DMA masks set-up, wrap the default DMA masks set-up in acpi_dma_configure() inside an IORT specific wrapper that reverts to a NOP on x86/ia64 systems, restoring the default expected behaviour on x86/ia64 systems and keeping DMA default masks set-up on IORT based (ie ARM) arch configurations. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Tomasz Nowicki <tn@semihalf.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-12-06 07:20:11 -07:00
*
* @dev: device to configure
* @dma_addr: device DMA address result pointer
* @size: DMA range size result pointer
ACPI/IORT: Make dma masks set-up IORT specific The introduction of acpi_dma_configure() allows to configure DMA and related IOMMU for any device that is DMA capable. To achieve that goal it ensures DMA masks are set-up to sane default values before proceeding with IOMMU and DMA ops configuration. On x86/ia64 systems, through acpi_bind_one(), acpi_dma_configure() is called for every device that has an ACPI companion, in that every device is considered DMA capable on x86/ia64 systems (ie acpi_get_dma_attr() API), which has the side effect of initializing dma masks also for pseudo-devices (eg CPUs and memory nodes) and potentially for devices whose dma masks were not set-up before the acpi_dma_configure() API was introduced, which may have noxious side effects. Therefore, in preparation for IORT firmware specific DMA masks set-up, wrap the default DMA masks set-up in acpi_dma_configure() inside an IORT specific wrapper that reverts to a NOP on x86/ia64 systems, restoring the default expected behaviour on x86/ia64 systems and keeping DMA default masks set-up on IORT based (ie ARM) arch configurations. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Tomasz Nowicki <tn@semihalf.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-12-06 07:20:11 -07:00
*/
void iort_dma_setup(struct device *dev, u64 *dma_addr, u64 *dma_size)
ACPI/IORT: Make dma masks set-up IORT specific The introduction of acpi_dma_configure() allows to configure DMA and related IOMMU for any device that is DMA capable. To achieve that goal it ensures DMA masks are set-up to sane default values before proceeding with IOMMU and DMA ops configuration. On x86/ia64 systems, through acpi_bind_one(), acpi_dma_configure() is called for every device that has an ACPI companion, in that every device is considered DMA capable on x86/ia64 systems (ie acpi_get_dma_attr() API), which has the side effect of initializing dma masks also for pseudo-devices (eg CPUs and memory nodes) and potentially for devices whose dma masks were not set-up before the acpi_dma_configure() API was introduced, which may have noxious side effects. Therefore, in preparation for IORT firmware specific DMA masks set-up, wrap the default DMA masks set-up in acpi_dma_configure() inside an IORT specific wrapper that reverts to a NOP on x86/ia64 systems, restoring the default expected behaviour on x86/ia64 systems and keeping DMA default masks set-up on IORT based (ie ARM) arch configurations. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Tomasz Nowicki <tn@semihalf.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-12-06 07:20:11 -07:00
{
u64 mask, dmaaddr = 0, size = 0, offset = 0;
int ret, msb;
ACPI/IORT: Make dma masks set-up IORT specific The introduction of acpi_dma_configure() allows to configure DMA and related IOMMU for any device that is DMA capable. To achieve that goal it ensures DMA masks are set-up to sane default values before proceeding with IOMMU and DMA ops configuration. On x86/ia64 systems, through acpi_bind_one(), acpi_dma_configure() is called for every device that has an ACPI companion, in that every device is considered DMA capable on x86/ia64 systems (ie acpi_get_dma_attr() API), which has the side effect of initializing dma masks also for pseudo-devices (eg CPUs and memory nodes) and potentially for devices whose dma masks were not set-up before the acpi_dma_configure() API was introduced, which may have noxious side effects. Therefore, in preparation for IORT firmware specific DMA masks set-up, wrap the default DMA masks set-up in acpi_dma_configure() inside an IORT specific wrapper that reverts to a NOP on x86/ia64 systems, restoring the default expected behaviour on x86/ia64 systems and keeping DMA default masks set-up on IORT based (ie ARM) arch configurations. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Tomasz Nowicki <tn@semihalf.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-12-06 07:20:11 -07:00
/*
* If @dev is expected to be DMA-capable then the bus code that created
* it should have initialised its dma_mask pointer by this point. For
* now, we'll continue the legacy behaviour of coercing it to the
* coherent mask if not, but we'll no longer do so quietly.
ACPI/IORT: Make dma masks set-up IORT specific The introduction of acpi_dma_configure() allows to configure DMA and related IOMMU for any device that is DMA capable. To achieve that goal it ensures DMA masks are set-up to sane default values before proceeding with IOMMU and DMA ops configuration. On x86/ia64 systems, through acpi_bind_one(), acpi_dma_configure() is called for every device that has an ACPI companion, in that every device is considered DMA capable on x86/ia64 systems (ie acpi_get_dma_attr() API), which has the side effect of initializing dma masks also for pseudo-devices (eg CPUs and memory nodes) and potentially for devices whose dma masks were not set-up before the acpi_dma_configure() API was introduced, which may have noxious side effects. Therefore, in preparation for IORT firmware specific DMA masks set-up, wrap the default DMA masks set-up in acpi_dma_configure() inside an IORT specific wrapper that reverts to a NOP on x86/ia64 systems, restoring the default expected behaviour on x86/ia64 systems and keeping DMA default masks set-up on IORT based (ie ARM) arch configurations. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Tomasz Nowicki <tn@semihalf.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-12-06 07:20:11 -07:00
*/
if (!dev->dma_mask) {
dev_warn(dev, "DMA mask not set\n");
ACPI/IORT: Make dma masks set-up IORT specific The introduction of acpi_dma_configure() allows to configure DMA and related IOMMU for any device that is DMA capable. To achieve that goal it ensures DMA masks are set-up to sane default values before proceeding with IOMMU and DMA ops configuration. On x86/ia64 systems, through acpi_bind_one(), acpi_dma_configure() is called for every device that has an ACPI companion, in that every device is considered DMA capable on x86/ia64 systems (ie acpi_get_dma_attr() API), which has the side effect of initializing dma masks also for pseudo-devices (eg CPUs and memory nodes) and potentially for devices whose dma masks were not set-up before the acpi_dma_configure() API was introduced, which may have noxious side effects. Therefore, in preparation for IORT firmware specific DMA masks set-up, wrap the default DMA masks set-up in acpi_dma_configure() inside an IORT specific wrapper that reverts to a NOP on x86/ia64 systems, restoring the default expected behaviour on x86/ia64 systems and keeping DMA default masks set-up on IORT based (ie ARM) arch configurations. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Tomasz Nowicki <tn@semihalf.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-12-06 07:20:11 -07:00
dev->dma_mask = &dev->coherent_dma_mask;
}
if (dev->coherent_dma_mask)
size = max(dev->coherent_dma_mask, dev->coherent_dma_mask + 1);
else
size = 1ULL << 32;
if (dev_is_pci(dev)) {
ret = acpi_dma_get_range(dev, &dmaaddr, &offset, &size);
if (ret == -ENODEV)
ret = rc_dma_get_range(dev, &size);
} else {
ret = nc_dma_get_range(dev, &size);
}
if (!ret) {
msb = fls64(dmaaddr + size - 1);
/*
* Round-up to the power-of-two mask or set
* the mask to the whole 64-bit address space
* in case the DMA region covers the full
* memory window.
*/
mask = msb == 64 ? U64_MAX : (1ULL << msb) - 1;
/*
* Limit coherent and dma mask based on size
* retrieved from firmware.
*/
dev->bus_dma_mask = mask;
dev->coherent_dma_mask = mask;
*dev->dma_mask = mask;
}
*dma_addr = dmaaddr;
*dma_size = size;
dev->dma_pfn_offset = PFN_DOWN(offset);
dev_dbg(dev, "dma_pfn_offset(%#08llx)\n", offset);
ACPI/IORT: Make dma masks set-up IORT specific The introduction of acpi_dma_configure() allows to configure DMA and related IOMMU for any device that is DMA capable. To achieve that goal it ensures DMA masks are set-up to sane default values before proceeding with IOMMU and DMA ops configuration. On x86/ia64 systems, through acpi_bind_one(), acpi_dma_configure() is called for every device that has an ACPI companion, in that every device is considered DMA capable on x86/ia64 systems (ie acpi_get_dma_attr() API), which has the side effect of initializing dma masks also for pseudo-devices (eg CPUs and memory nodes) and potentially for devices whose dma masks were not set-up before the acpi_dma_configure() API was introduced, which may have noxious side effects. Therefore, in preparation for IORT firmware specific DMA masks set-up, wrap the default DMA masks set-up in acpi_dma_configure() inside an IORT specific wrapper that reverts to a NOP on x86/ia64 systems, restoring the default expected behaviour on x86/ia64 systems and keeping DMA default masks set-up on IORT based (ie ARM) arch configurations. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Tomasz Nowicki <tn@semihalf.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-12-06 07:20:11 -07:00
}
static void __init acpi_iort_register_irq(int hwirq, const char *name,
int trigger,
struct resource *res)
{
int irq = acpi_register_gsi(NULL, hwirq, trigger,
ACPI_ACTIVE_HIGH);
if (irq <= 0) {
pr_err("could not register gsi hwirq %d name [%s]\n", hwirq,
name);
return;
}
res->start = irq;
res->end = irq;
res->flags = IORESOURCE_IRQ;
res->name = name;
}
static int __init arm_smmu_v3_count_resources(struct acpi_iort_node *node)
{
struct acpi_iort_smmu_v3 *smmu;
/* Always present mem resource */
int num_res = 1;
/* Retrieve SMMUv3 specific data */
smmu = (struct acpi_iort_smmu_v3 *)node->node_data;
if (smmu->event_gsiv)
num_res++;
if (smmu->pri_gsiv)
num_res++;
if (smmu->gerr_gsiv)
num_res++;
if (smmu->sync_gsiv)
num_res++;
return num_res;
}
static bool arm_smmu_v3_is_combined_irq(struct acpi_iort_smmu_v3 *smmu)
{
/*
* Cavium ThunderX2 implementation doesn't not support unique
* irq line. Use single irq line for all the SMMUv3 interrupts.
*/
if (smmu->model != ACPI_IORT_SMMU_V3_CAVIUM_CN99XX)
return false;
/*
* ThunderX2 doesn't support MSIs from the SMMU, so we're checking
* SPI numbers here.
*/
return smmu->event_gsiv == smmu->pri_gsiv &&
smmu->event_gsiv == smmu->gerr_gsiv &&
smmu->event_gsiv == smmu->sync_gsiv;
}
static unsigned long arm_smmu_v3_resource_size(struct acpi_iort_smmu_v3 *smmu)
{
/*
* Override the size, for Cavium ThunderX2 implementation
* which doesn't support the page 1 SMMU register space.
*/
if (smmu->model == ACPI_IORT_SMMU_V3_CAVIUM_CN99XX)
return SZ_64K;
return SZ_128K;
}
static void __init arm_smmu_v3_init_resources(struct resource *res,
struct acpi_iort_node *node)
{
struct acpi_iort_smmu_v3 *smmu;
int num_res = 0;
/* Retrieve SMMUv3 specific data */
smmu = (struct acpi_iort_smmu_v3 *)node->node_data;
res[num_res].start = smmu->base_address;
res[num_res].end = smmu->base_address +
arm_smmu_v3_resource_size(smmu) - 1;
res[num_res].flags = IORESOURCE_MEM;
num_res++;
if (arm_smmu_v3_is_combined_irq(smmu)) {
if (smmu->event_gsiv)
acpi_iort_register_irq(smmu->event_gsiv, "combined",
ACPI_EDGE_SENSITIVE,
&res[num_res++]);
} else {
if (smmu->event_gsiv)
acpi_iort_register_irq(smmu->event_gsiv, "eventq",
ACPI_EDGE_SENSITIVE,
&res[num_res++]);
if (smmu->pri_gsiv)
acpi_iort_register_irq(smmu->pri_gsiv, "priq",
ACPI_EDGE_SENSITIVE,
&res[num_res++]);
if (smmu->gerr_gsiv)
acpi_iort_register_irq(smmu->gerr_gsiv, "gerror",
ACPI_EDGE_SENSITIVE,
&res[num_res++]);
if (smmu->sync_gsiv)
acpi_iort_register_irq(smmu->sync_gsiv, "cmdq-sync",
ACPI_EDGE_SENSITIVE,
&res[num_res++]);
}
}
static void __init arm_smmu_v3_dma_configure(struct device *dev,
struct acpi_iort_node *node)
{
struct acpi_iort_smmu_v3 *smmu;
enum dev_dma_attr attr;
/* Retrieve SMMUv3 specific data */
smmu = (struct acpi_iort_smmu_v3 *)node->node_data;
attr = (smmu->flags & ACPI_IORT_SMMU_V3_COHACC_OVERRIDE) ?
DEV_DMA_COHERENT : DEV_DMA_NON_COHERENT;
/* We expect the dma masks to be equivalent for all SMMUv3 set-ups */
dev->dma_mask = &dev->coherent_dma_mask;
/* Configure DMA for the page table walker */
acpi_dma_configure(dev, attr);
}
#if defined(CONFIG_ACPI_NUMA)
/*
* set numa proximity domain for smmuv3 device
*/
ACPI/IORT: Reject platform device creation on NUMA node mapping failure In a system where, through IORT firmware mappings, the SMMU device is mapped to a NUMA node that is not online, the kernel bootstrap results in the following crash: Unable to handle kernel paging request at virtual address 0000000000001388 Mem abort info: ESR = 0x96000004 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 [0000000000001388] user address but active_mm is swapper Internal error: Oops: 96000004 [#1] SMP Modules linked in: CPU: 5 PID: 1 Comm: swapper/0 Not tainted 5.0.0 #15 pstate: 80c00009 (Nzcv daif +PAN +UAO) pc : __alloc_pages_nodemask+0x13c/0x1068 lr : __alloc_pages_nodemask+0xdc/0x1068 ... Process swapper/0 (pid: 1, stack limit = 0x(____ptrval____)) Call trace: __alloc_pages_nodemask+0x13c/0x1068 new_slab+0xec/0x570 ___slab_alloc+0x3e0/0x4f8 __slab_alloc+0x60/0x80 __kmalloc_node_track_caller+0x10c/0x478 devm_kmalloc+0x44/0xb0 pinctrl_bind_pins+0x4c/0x188 really_probe+0x78/0x2b8 driver_probe_device+0x64/0x110 device_driver_attach+0x74/0x98 __driver_attach+0x9c/0xe8 bus_for_each_dev+0x84/0xd8 driver_attach+0x30/0x40 bus_add_driver+0x170/0x218 driver_register+0x64/0x118 __platform_driver_register+0x54/0x60 arm_smmu_driver_init+0x24/0x2c do_one_initcall+0xbc/0x328 kernel_init_freeable+0x304/0x3ac kernel_init+0x18/0x110 ret_from_fork+0x10/0x1c Code: f90013b5 b9410fa1 1a9f0694 b50014c2 (b9400804) ---[ end trace dfeaed4c373a32da ]-- Change the dev_set_proximity() hook prototype so that it returns a value and make it return failure if the PXM->NUMA-node mapping corresponds to an offline node, fixing the crash. Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Link: https://lore.kernel.org/linux-arm-kernel/20190315021940.86905-1-wangkefeng.wang@huawei.com/ Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-08 09:21:12 -06:00
static int __init arm_smmu_v3_set_proximity(struct device *dev,
struct acpi_iort_node *node)
{
struct acpi_iort_smmu_v3 *smmu;
smmu = (struct acpi_iort_smmu_v3 *)node->node_data;
if (smmu->flags & ACPI_IORT_SMMU_V3_PXM_VALID) {
ACPI/IORT: Reject platform device creation on NUMA node mapping failure In a system where, through IORT firmware mappings, the SMMU device is mapped to a NUMA node that is not online, the kernel bootstrap results in the following crash: Unable to handle kernel paging request at virtual address 0000000000001388 Mem abort info: ESR = 0x96000004 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 [0000000000001388] user address but active_mm is swapper Internal error: Oops: 96000004 [#1] SMP Modules linked in: CPU: 5 PID: 1 Comm: swapper/0 Not tainted 5.0.0 #15 pstate: 80c00009 (Nzcv daif +PAN +UAO) pc : __alloc_pages_nodemask+0x13c/0x1068 lr : __alloc_pages_nodemask+0xdc/0x1068 ... Process swapper/0 (pid: 1, stack limit = 0x(____ptrval____)) Call trace: __alloc_pages_nodemask+0x13c/0x1068 new_slab+0xec/0x570 ___slab_alloc+0x3e0/0x4f8 __slab_alloc+0x60/0x80 __kmalloc_node_track_caller+0x10c/0x478 devm_kmalloc+0x44/0xb0 pinctrl_bind_pins+0x4c/0x188 really_probe+0x78/0x2b8 driver_probe_device+0x64/0x110 device_driver_attach+0x74/0x98 __driver_attach+0x9c/0xe8 bus_for_each_dev+0x84/0xd8 driver_attach+0x30/0x40 bus_add_driver+0x170/0x218 driver_register+0x64/0x118 __platform_driver_register+0x54/0x60 arm_smmu_driver_init+0x24/0x2c do_one_initcall+0xbc/0x328 kernel_init_freeable+0x304/0x3ac kernel_init+0x18/0x110 ret_from_fork+0x10/0x1c Code: f90013b5 b9410fa1 1a9f0694 b50014c2 (b9400804) ---[ end trace dfeaed4c373a32da ]-- Change the dev_set_proximity() hook prototype so that it returns a value and make it return failure if the PXM->NUMA-node mapping corresponds to an offline node, fixing the crash. Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Link: https://lore.kernel.org/linux-arm-kernel/20190315021940.86905-1-wangkefeng.wang@huawei.com/ Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-08 09:21:12 -06:00
int node = acpi_map_pxm_to_node(smmu->pxm);
if (node != NUMA_NO_NODE && !node_online(node))
return -EINVAL;
set_dev_node(dev, node);
pr_info("SMMU-v3[%llx] Mapped to Proximity domain %d\n",
smmu->base_address,
smmu->pxm);
}
ACPI/IORT: Reject platform device creation on NUMA node mapping failure In a system where, through IORT firmware mappings, the SMMU device is mapped to a NUMA node that is not online, the kernel bootstrap results in the following crash: Unable to handle kernel paging request at virtual address 0000000000001388 Mem abort info: ESR = 0x96000004 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 [0000000000001388] user address but active_mm is swapper Internal error: Oops: 96000004 [#1] SMP Modules linked in: CPU: 5 PID: 1 Comm: swapper/0 Not tainted 5.0.0 #15 pstate: 80c00009 (Nzcv daif +PAN +UAO) pc : __alloc_pages_nodemask+0x13c/0x1068 lr : __alloc_pages_nodemask+0xdc/0x1068 ... Process swapper/0 (pid: 1, stack limit = 0x(____ptrval____)) Call trace: __alloc_pages_nodemask+0x13c/0x1068 new_slab+0xec/0x570 ___slab_alloc+0x3e0/0x4f8 __slab_alloc+0x60/0x80 __kmalloc_node_track_caller+0x10c/0x478 devm_kmalloc+0x44/0xb0 pinctrl_bind_pins+0x4c/0x188 really_probe+0x78/0x2b8 driver_probe_device+0x64/0x110 device_driver_attach+0x74/0x98 __driver_attach+0x9c/0xe8 bus_for_each_dev+0x84/0xd8 driver_attach+0x30/0x40 bus_add_driver+0x170/0x218 driver_register+0x64/0x118 __platform_driver_register+0x54/0x60 arm_smmu_driver_init+0x24/0x2c do_one_initcall+0xbc/0x328 kernel_init_freeable+0x304/0x3ac kernel_init+0x18/0x110 ret_from_fork+0x10/0x1c Code: f90013b5 b9410fa1 1a9f0694 b50014c2 (b9400804) ---[ end trace dfeaed4c373a32da ]-- Change the dev_set_proximity() hook prototype so that it returns a value and make it return failure if the PXM->NUMA-node mapping corresponds to an offline node, fixing the crash. Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Link: https://lore.kernel.org/linux-arm-kernel/20190315021940.86905-1-wangkefeng.wang@huawei.com/ Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-08 09:21:12 -06:00
return 0;
}
#else
#define arm_smmu_v3_set_proximity NULL
#endif
static int __init arm_smmu_count_resources(struct acpi_iort_node *node)
{
struct acpi_iort_smmu *smmu;
/* Retrieve SMMU specific data */
smmu = (struct acpi_iort_smmu *)node->node_data;
/*
* Only consider the global fault interrupt and ignore the
* configuration access interrupt.
*
* MMIO address and global fault interrupt resources are always
* present so add them to the context interrupt count as a static
* value.
*/
return smmu->context_interrupt_count + 2;
}
static void __init arm_smmu_init_resources(struct resource *res,
struct acpi_iort_node *node)
{
struct acpi_iort_smmu *smmu;
int i, hw_irq, trigger, num_res = 0;
u64 *ctx_irq, *glb_irq;
/* Retrieve SMMU specific data */
smmu = (struct acpi_iort_smmu *)node->node_data;
res[num_res].start = smmu->base_address;
res[num_res].end = smmu->base_address + smmu->span - 1;
res[num_res].flags = IORESOURCE_MEM;
num_res++;
glb_irq = ACPI_ADD_PTR(u64, node, smmu->global_interrupt_offset);
/* Global IRQs */
hw_irq = IORT_IRQ_MASK(glb_irq[0]);
trigger = IORT_IRQ_TRIGGER_MASK(glb_irq[0]);
acpi_iort_register_irq(hw_irq, "arm-smmu-global", trigger,
&res[num_res++]);
/* Context IRQs */
ctx_irq = ACPI_ADD_PTR(u64, node, smmu->context_interrupt_offset);
for (i = 0; i < smmu->context_interrupt_count; i++) {
hw_irq = IORT_IRQ_MASK(ctx_irq[i]);
trigger = IORT_IRQ_TRIGGER_MASK(ctx_irq[i]);
acpi_iort_register_irq(hw_irq, "arm-smmu-context", trigger,
&res[num_res++]);
}
}
static void __init arm_smmu_dma_configure(struct device *dev,
struct acpi_iort_node *node)
{
struct acpi_iort_smmu *smmu;
enum dev_dma_attr attr;
/* Retrieve SMMU specific data */
smmu = (struct acpi_iort_smmu *)node->node_data;
attr = (smmu->flags & ACPI_IORT_SMMU_COHERENT_WALK) ?
DEV_DMA_COHERENT : DEV_DMA_NON_COHERENT;
/* We expect the dma masks to be equivalent for SMMU set-ups */
dev->dma_mask = &dev->coherent_dma_mask;
/* Configure DMA for the page table walker */
acpi_dma_configure(dev, attr);
}
static int __init arm_smmu_v3_pmcg_count_resources(struct acpi_iort_node *node)
{
struct acpi_iort_pmcg *pmcg;
/* Retrieve PMCG specific data */
pmcg = (struct acpi_iort_pmcg *)node->node_data;
/*
* There are always 2 memory resources.
* If the overflow_gsiv is present then add that for a total of 3.
*/
return pmcg->overflow_gsiv ? 3 : 2;
}
static void __init arm_smmu_v3_pmcg_init_resources(struct resource *res,
struct acpi_iort_node *node)
{
struct acpi_iort_pmcg *pmcg;
/* Retrieve PMCG specific data */
pmcg = (struct acpi_iort_pmcg *)node->node_data;
res[0].start = pmcg->page0_base_address;
res[0].end = pmcg->page0_base_address + SZ_4K - 1;
res[0].flags = IORESOURCE_MEM;
res[1].start = pmcg->page1_base_address;
res[1].end = pmcg->page1_base_address + SZ_4K - 1;
res[1].flags = IORESOURCE_MEM;
if (pmcg->overflow_gsiv)
acpi_iort_register_irq(pmcg->overflow_gsiv, "overflow",
ACPI_EDGE_SENSITIVE, &res[2]);
}
static struct acpi_platform_list pmcg_plat_info[] __initdata = {
/* HiSilicon Hip08 Platform */
{"HISI ", "HIP08 ", 0, ACPI_SIG_IORT, greater_than_or_equal,
"Erratum #162001800", IORT_SMMU_V3_PMCG_HISI_HIP08},
{ }
};
static int __init arm_smmu_v3_pmcg_add_platdata(struct platform_device *pdev)
{
u32 model;
int idx;
idx = acpi_match_platform_list(pmcg_plat_info);
if (idx >= 0)
model = pmcg_plat_info[idx].data;
else
model = IORT_SMMU_V3_PMCG_GENERIC;
return platform_device_add_data(pdev, &model, sizeof(model));
}
struct iort_dev_config {
const char *name;
int (*dev_init)(struct acpi_iort_node *node);
void (*dev_dma_configure)(struct device *dev,
struct acpi_iort_node *node);
int (*dev_count_resources)(struct acpi_iort_node *node);
void (*dev_init_resources)(struct resource *res,
struct acpi_iort_node *node);
ACPI/IORT: Reject platform device creation on NUMA node mapping failure In a system where, through IORT firmware mappings, the SMMU device is mapped to a NUMA node that is not online, the kernel bootstrap results in the following crash: Unable to handle kernel paging request at virtual address 0000000000001388 Mem abort info: ESR = 0x96000004 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 [0000000000001388] user address but active_mm is swapper Internal error: Oops: 96000004 [#1] SMP Modules linked in: CPU: 5 PID: 1 Comm: swapper/0 Not tainted 5.0.0 #15 pstate: 80c00009 (Nzcv daif +PAN +UAO) pc : __alloc_pages_nodemask+0x13c/0x1068 lr : __alloc_pages_nodemask+0xdc/0x1068 ... Process swapper/0 (pid: 1, stack limit = 0x(____ptrval____)) Call trace: __alloc_pages_nodemask+0x13c/0x1068 new_slab+0xec/0x570 ___slab_alloc+0x3e0/0x4f8 __slab_alloc+0x60/0x80 __kmalloc_node_track_caller+0x10c/0x478 devm_kmalloc+0x44/0xb0 pinctrl_bind_pins+0x4c/0x188 really_probe+0x78/0x2b8 driver_probe_device+0x64/0x110 device_driver_attach+0x74/0x98 __driver_attach+0x9c/0xe8 bus_for_each_dev+0x84/0xd8 driver_attach+0x30/0x40 bus_add_driver+0x170/0x218 driver_register+0x64/0x118 __platform_driver_register+0x54/0x60 arm_smmu_driver_init+0x24/0x2c do_one_initcall+0xbc/0x328 kernel_init_freeable+0x304/0x3ac kernel_init+0x18/0x110 ret_from_fork+0x10/0x1c Code: f90013b5 b9410fa1 1a9f0694 b50014c2 (b9400804) ---[ end trace dfeaed4c373a32da ]-- Change the dev_set_proximity() hook prototype so that it returns a value and make it return failure if the PXM->NUMA-node mapping corresponds to an offline node, fixing the crash. Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Link: https://lore.kernel.org/linux-arm-kernel/20190315021940.86905-1-wangkefeng.wang@huawei.com/ Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-08 09:21:12 -06:00
int (*dev_set_proximity)(struct device *dev,
struct acpi_iort_node *node);
int (*dev_add_platdata)(struct platform_device *pdev);
};
static const struct iort_dev_config iort_arm_smmu_v3_cfg __initconst = {
.name = "arm-smmu-v3",
.dev_dma_configure = arm_smmu_v3_dma_configure,
.dev_count_resources = arm_smmu_v3_count_resources,
.dev_init_resources = arm_smmu_v3_init_resources,
.dev_set_proximity = arm_smmu_v3_set_proximity,
};
static const struct iort_dev_config iort_arm_smmu_cfg __initconst = {
.name = "arm-smmu",
.dev_dma_configure = arm_smmu_dma_configure,
.dev_count_resources = arm_smmu_count_resources,
.dev_init_resources = arm_smmu_init_resources,
};
static const struct iort_dev_config iort_arm_smmu_v3_pmcg_cfg __initconst = {
.name = "arm-smmu-v3-pmcg",
.dev_count_resources = arm_smmu_v3_pmcg_count_resources,
.dev_init_resources = arm_smmu_v3_pmcg_init_resources,
.dev_add_platdata = arm_smmu_v3_pmcg_add_platdata,
};
static __init const struct iort_dev_config *iort_get_dev_cfg(
struct acpi_iort_node *node)
{
switch (node->type) {
case ACPI_IORT_NODE_SMMU_V3:
return &iort_arm_smmu_v3_cfg;
case ACPI_IORT_NODE_SMMU:
return &iort_arm_smmu_cfg;
case ACPI_IORT_NODE_PMCG:
return &iort_arm_smmu_v3_pmcg_cfg;
default:
return NULL;
}
}
/**
* iort_add_platform_device() - Allocate a platform device for IORT node
* @node: Pointer to device ACPI IORT node
*
* Returns: 0 on success, <0 failure
*/
static int __init iort_add_platform_device(struct acpi_iort_node *node,
const struct iort_dev_config *ops)
{
struct fwnode_handle *fwnode;
struct platform_device *pdev;
struct resource *r;
int ret, count;
pdev = platform_device_alloc(ops->name, PLATFORM_DEVID_AUTO);
if (!pdev)
return -ENOMEM;
ACPI/IORT: Reject platform device creation on NUMA node mapping failure In a system where, through IORT firmware mappings, the SMMU device is mapped to a NUMA node that is not online, the kernel bootstrap results in the following crash: Unable to handle kernel paging request at virtual address 0000000000001388 Mem abort info: ESR = 0x96000004 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 [0000000000001388] user address but active_mm is swapper Internal error: Oops: 96000004 [#1] SMP Modules linked in: CPU: 5 PID: 1 Comm: swapper/0 Not tainted 5.0.0 #15 pstate: 80c00009 (Nzcv daif +PAN +UAO) pc : __alloc_pages_nodemask+0x13c/0x1068 lr : __alloc_pages_nodemask+0xdc/0x1068 ... Process swapper/0 (pid: 1, stack limit = 0x(____ptrval____)) Call trace: __alloc_pages_nodemask+0x13c/0x1068 new_slab+0xec/0x570 ___slab_alloc+0x3e0/0x4f8 __slab_alloc+0x60/0x80 __kmalloc_node_track_caller+0x10c/0x478 devm_kmalloc+0x44/0xb0 pinctrl_bind_pins+0x4c/0x188 really_probe+0x78/0x2b8 driver_probe_device+0x64/0x110 device_driver_attach+0x74/0x98 __driver_attach+0x9c/0xe8 bus_for_each_dev+0x84/0xd8 driver_attach+0x30/0x40 bus_add_driver+0x170/0x218 driver_register+0x64/0x118 __platform_driver_register+0x54/0x60 arm_smmu_driver_init+0x24/0x2c do_one_initcall+0xbc/0x328 kernel_init_freeable+0x304/0x3ac kernel_init+0x18/0x110 ret_from_fork+0x10/0x1c Code: f90013b5 b9410fa1 1a9f0694 b50014c2 (b9400804) ---[ end trace dfeaed4c373a32da ]-- Change the dev_set_proximity() hook prototype so that it returns a value and make it return failure if the PXM->NUMA-node mapping corresponds to an offline node, fixing the crash. Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Link: https://lore.kernel.org/linux-arm-kernel/20190315021940.86905-1-wangkefeng.wang@huawei.com/ Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-08 09:21:12 -06:00
if (ops->dev_set_proximity) {
ret = ops->dev_set_proximity(&pdev->dev, node);
if (ret)
goto dev_put;
}
count = ops->dev_count_resources(node);
r = kcalloc(count, sizeof(*r), GFP_KERNEL);
if (!r) {
ret = -ENOMEM;
goto dev_put;
}
ops->dev_init_resources(r, node);
ret = platform_device_add_resources(pdev, r, count);
/*
* Resources are duplicated in platform_device_add_resources,
* free their allocated memory
*/
kfree(r);
if (ret)
goto dev_put;
/*
* Platform devices based on PMCG nodes uses platform_data to
* pass the hardware model info to the driver. For others, add
* a copy of IORT node pointer to platform_data to be used to
* retrieve IORT data information.
*/
if (ops->dev_add_platdata)
ret = ops->dev_add_platdata(pdev);
else
ret = platform_device_add_data(pdev, &node, sizeof(node));
if (ret)
goto dev_put;
fwnode = iort_get_fwnode(node);
if (!fwnode) {
ret = -ENODEV;
goto dev_put;
}
pdev->dev.fwnode = fwnode;
if (ops->dev_dma_configure)
ops->dev_dma_configure(&pdev->dev, node);
iort_set_device_domain(&pdev->dev, node);
ret = platform_device_add(pdev);
if (ret)
goto dma_deconfigure;
return 0;
dma_deconfigure:
arch_teardown_dma_ops(&pdev->dev);
dev_put:
platform_device_put(pdev);
return ret;
}
#ifdef CONFIG_PCI
static void __init iort_enable_acs(struct acpi_iort_node *iort_node)
ACPI/IORT: Fix PCI ACS enablement commit f6810c15cf97 ("iommu/arm-smmu: Clean up early-probing workarounds") removed kernel code that was allowing to initialize and probe the SMMU devices early (ie earlier than PCI devices, through linker script callback entries) in the boot process because it was not needed any longer in that the SMMU devices/drivers now support deferred probing. Since the SMMUs probe routines are also in charge of requesting global PCI ACS kernel enablement, commit f6810c15cf97 ("iommu/arm-smmu: Clean up early-probing workarounds") also postponed PCI ACS enablement to SMMUs devices probe time, which is too late given that PCI devices needs to detect if PCI ACS is enabled to init the respective capability through the following call path: pci_device_add() -> pci_init_capabilities() -> pci_enable_acs() Add code in the ACPI IORT SMMU platform devices initialization path (that is called before ACPI PCI enumeration) to detect if there exists firmware mappings to map root complexes ids to SMMU ids and if so enable ACS for the system. Fixes: f6810c15cf97 ("iommu/arm-smmu: Clean up early-probing workarounds") Reviewed-by: Robin Murphy <robin.murphy@arm.com> Tested-by: Nate Watterson <nwatters@codeaurora.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Zhou Wang <wangzhou1@hisilicon.com> Cc: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-10-02 11:28:44 -06:00
{
static bool acs_enabled __initdata;
if (acs_enabled)
return;
ACPI/IORT: Fix PCI ACS enablement commit f6810c15cf97 ("iommu/arm-smmu: Clean up early-probing workarounds") removed kernel code that was allowing to initialize and probe the SMMU devices early (ie earlier than PCI devices, through linker script callback entries) in the boot process because it was not needed any longer in that the SMMU devices/drivers now support deferred probing. Since the SMMUs probe routines are also in charge of requesting global PCI ACS kernel enablement, commit f6810c15cf97 ("iommu/arm-smmu: Clean up early-probing workarounds") also postponed PCI ACS enablement to SMMUs devices probe time, which is too late given that PCI devices needs to detect if PCI ACS is enabled to init the respective capability through the following call path: pci_device_add() -> pci_init_capabilities() -> pci_enable_acs() Add code in the ACPI IORT SMMU platform devices initialization path (that is called before ACPI PCI enumeration) to detect if there exists firmware mappings to map root complexes ids to SMMU ids and if so enable ACS for the system. Fixes: f6810c15cf97 ("iommu/arm-smmu: Clean up early-probing workarounds") Reviewed-by: Robin Murphy <robin.murphy@arm.com> Tested-by: Nate Watterson <nwatters@codeaurora.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Zhou Wang <wangzhou1@hisilicon.com> Cc: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-10-02 11:28:44 -06:00
if (iort_node->type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX) {
struct acpi_iort_node *parent;
struct acpi_iort_id_mapping *map;
int i;
map = ACPI_ADD_PTR(struct acpi_iort_id_mapping, iort_node,
iort_node->mapping_offset);
for (i = 0; i < iort_node->mapping_count; i++, map++) {
if (!map->output_reference)
continue;
parent = ACPI_ADD_PTR(struct acpi_iort_node,
iort_table, map->output_reference);
/*
* If we detect a RC->SMMU mapping, make sure
* we enable ACS on the system.
*/
if ((parent->type == ACPI_IORT_NODE_SMMU) ||
(parent->type == ACPI_IORT_NODE_SMMU_V3)) {
pci_request_acs();
acs_enabled = true;
return;
ACPI/IORT: Fix PCI ACS enablement commit f6810c15cf97 ("iommu/arm-smmu: Clean up early-probing workarounds") removed kernel code that was allowing to initialize and probe the SMMU devices early (ie earlier than PCI devices, through linker script callback entries) in the boot process because it was not needed any longer in that the SMMU devices/drivers now support deferred probing. Since the SMMUs probe routines are also in charge of requesting global PCI ACS kernel enablement, commit f6810c15cf97 ("iommu/arm-smmu: Clean up early-probing workarounds") also postponed PCI ACS enablement to SMMUs devices probe time, which is too late given that PCI devices needs to detect if PCI ACS is enabled to init the respective capability through the following call path: pci_device_add() -> pci_init_capabilities() -> pci_enable_acs() Add code in the ACPI IORT SMMU platform devices initialization path (that is called before ACPI PCI enumeration) to detect if there exists firmware mappings to map root complexes ids to SMMU ids and if so enable ACS for the system. Fixes: f6810c15cf97 ("iommu/arm-smmu: Clean up early-probing workarounds") Reviewed-by: Robin Murphy <robin.murphy@arm.com> Tested-by: Nate Watterson <nwatters@codeaurora.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Zhou Wang <wangzhou1@hisilicon.com> Cc: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-10-02 11:28:44 -06:00
}
}
}
}
#else
static inline void iort_enable_acs(struct acpi_iort_node *iort_node) { }
#endif
ACPI/IORT: Fix PCI ACS enablement commit f6810c15cf97 ("iommu/arm-smmu: Clean up early-probing workarounds") removed kernel code that was allowing to initialize and probe the SMMU devices early (ie earlier than PCI devices, through linker script callback entries) in the boot process because it was not needed any longer in that the SMMU devices/drivers now support deferred probing. Since the SMMUs probe routines are also in charge of requesting global PCI ACS kernel enablement, commit f6810c15cf97 ("iommu/arm-smmu: Clean up early-probing workarounds") also postponed PCI ACS enablement to SMMUs devices probe time, which is too late given that PCI devices needs to detect if PCI ACS is enabled to init the respective capability through the following call path: pci_device_add() -> pci_init_capabilities() -> pci_enable_acs() Add code in the ACPI IORT SMMU platform devices initialization path (that is called before ACPI PCI enumeration) to detect if there exists firmware mappings to map root complexes ids to SMMU ids and if so enable ACS for the system. Fixes: f6810c15cf97 ("iommu/arm-smmu: Clean up early-probing workarounds") Reviewed-by: Robin Murphy <robin.murphy@arm.com> Tested-by: Nate Watterson <nwatters@codeaurora.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Zhou Wang <wangzhou1@hisilicon.com> Cc: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-10-02 11:28:44 -06:00
static void __init iort_init_platform_devices(void)
{
struct acpi_iort_node *iort_node, *iort_end;
struct acpi_table_iort *iort;
struct fwnode_handle *fwnode;
int i, ret;
const struct iort_dev_config *ops;
/*
* iort_table and iort both point to the start of IORT table, but
* have different struct types
*/
iort = (struct acpi_table_iort *)iort_table;
/* Get the first IORT node */
iort_node = ACPI_ADD_PTR(struct acpi_iort_node, iort,
iort->node_offset);
iort_end = ACPI_ADD_PTR(struct acpi_iort_node, iort,
iort_table->length);
for (i = 0; i < iort->node_count; i++) {
if (iort_node >= iort_end) {
pr_err("iort node pointer overflows, bad table\n");
return;
}
iort_enable_acs(iort_node);
ACPI/IORT: Fix PCI ACS enablement commit f6810c15cf97 ("iommu/arm-smmu: Clean up early-probing workarounds") removed kernel code that was allowing to initialize and probe the SMMU devices early (ie earlier than PCI devices, through linker script callback entries) in the boot process because it was not needed any longer in that the SMMU devices/drivers now support deferred probing. Since the SMMUs probe routines are also in charge of requesting global PCI ACS kernel enablement, commit f6810c15cf97 ("iommu/arm-smmu: Clean up early-probing workarounds") also postponed PCI ACS enablement to SMMUs devices probe time, which is too late given that PCI devices needs to detect if PCI ACS is enabled to init the respective capability through the following call path: pci_device_add() -> pci_init_capabilities() -> pci_enable_acs() Add code in the ACPI IORT SMMU platform devices initialization path (that is called before ACPI PCI enumeration) to detect if there exists firmware mappings to map root complexes ids to SMMU ids and if so enable ACS for the system. Fixes: f6810c15cf97 ("iommu/arm-smmu: Clean up early-probing workarounds") Reviewed-by: Robin Murphy <robin.murphy@arm.com> Tested-by: Nate Watterson <nwatters@codeaurora.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Zhou Wang <wangzhou1@hisilicon.com> Cc: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-10-02 11:28:44 -06:00
ops = iort_get_dev_cfg(iort_node);
if (ops) {
fwnode = acpi_alloc_fwnode_static();
if (!fwnode)
return;
iort_set_fwnode(iort_node, fwnode);
ret = iort_add_platform_device(iort_node, ops);
if (ret) {
iort_delete_fwnode(iort_node);
acpi_free_fwnode_static(fwnode);
return;
}
}
iort_node = ACPI_ADD_PTR(struct acpi_iort_node, iort_node,
iort_node->length);
}
}
ACPI: I/O Remapping Table (IORT) initial support IORT shows representation of IO topology for ARM based systems. It describes how various components are connected together on parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf Initial support allows to detect IORT table presence and save its root pointer obtained through acpi_get_table(). The pointer validity depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap is not set while using IORT nodes we would dereference unmapped pointers. For the aforementioned reason call acpi_iort_init() from acpi_init() which guarantees acpi_gbl_permanent_mmap to be set at that point. Add generic helpers which are helpful for scanning and retrieving information from IORT table content. List of the most important helpers: - iort_find_dev_node() finds IORT node for a given device - iort_node_map_rid() maps device RID and returns IORT node which provides final translation IORT support is placed under drivers/acpi/arm64/ new directory due to its ARM64 specific nature. The code there is considered only for ARM64. The long term plan is to keep all ARM64 specific tables support in this place e.g. GTDT table. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-12 12:54:20 -06:00
void __init acpi_iort_init(void)
{
acpi_status status;
status = acpi_get_table(ACPI_SIG_IORT, 0, &iort_table);
ACPI/IORT: Introduce linker section for IORT entries probing Since commit e647b532275b ("ACPI: Add early device probing infrastructure") the kernel has gained the infrastructure that allows adding linker script section entries to execute ACPI driver callbacks (ie probe routines) for all subsystems that register a table entry in the respective kernel section (eg clocksource, irqchip). Since ARM IOMMU devices data is described through IORT tables when booting with ACPI, the ARM IOMMU drivers must be made able to hook ACPI callback routines that are called to probe IORT entries and initialize the respective IOMMU devices. To avoid adding driver specific hooks into IORT table initialization code (breaking therefore code modularity - ie ACPI IORT code must be made aware of ARM SMMU drivers ACPI init callbacks), this patch adds code that allows ARM SMMU drivers to take advantage of the ACPI early probing infrastructure, so that they can add linker script section entries containing drivers callback to be executed on IORT tables detection. Since IORT nodes are differentiated by a type, the callback routines can easily parse the IORT table entries, check the IORT nodes and carry out some actions whenever the IORT node type associated with the driver specific callback is matched. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Tomasz Nowicki <tn@semihalf.com> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Tomasz Nowicki <tn@semihalf.com> Cc: Tomasz Nowicki <tn@semihalf.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-11-21 03:01:34 -07:00
if (ACPI_FAILURE(status)) {
if (status != AE_NOT_FOUND) {
const char *msg = acpi_format_exception(status);
pr_err("Failed to get table, %s\n", msg);
}
return;
ACPI: I/O Remapping Table (IORT) initial support IORT shows representation of IO topology for ARM based systems. It describes how various components are connected together on parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf Initial support allows to detect IORT table presence and save its root pointer obtained through acpi_get_table(). The pointer validity depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap is not set while using IORT nodes we would dereference unmapped pointers. For the aforementioned reason call acpi_iort_init() from acpi_init() which guarantees acpi_gbl_permanent_mmap to be set at that point. Add generic helpers which are helpful for scanning and retrieving information from IORT table content. List of the most important helpers: - iort_find_dev_node() finds IORT node for a given device - iort_node_map_rid() maps device RID and returns IORT node which provides final translation IORT support is placed under drivers/acpi/arm64/ new directory due to its ARM64 specific nature. The code there is considered only for ARM64. The long term plan is to keep all ARM64 specific tables support in this place e.g. GTDT table. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-12 12:54:20 -06:00
}
ACPI/IORT: Introduce linker section for IORT entries probing Since commit e647b532275b ("ACPI: Add early device probing infrastructure") the kernel has gained the infrastructure that allows adding linker script section entries to execute ACPI driver callbacks (ie probe routines) for all subsystems that register a table entry in the respective kernel section (eg clocksource, irqchip). Since ARM IOMMU devices data is described through IORT tables when booting with ACPI, the ARM IOMMU drivers must be made able to hook ACPI callback routines that are called to probe IORT entries and initialize the respective IOMMU devices. To avoid adding driver specific hooks into IORT table initialization code (breaking therefore code modularity - ie ACPI IORT code must be made aware of ARM SMMU drivers ACPI init callbacks), this patch adds code that allows ARM SMMU drivers to take advantage of the ACPI early probing infrastructure, so that they can add linker script section entries containing drivers callback to be executed on IORT tables detection. Since IORT nodes are differentiated by a type, the callback routines can easily parse the IORT table entries, check the IORT nodes and carry out some actions whenever the IORT node type associated with the driver specific callback is matched. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Tomasz Nowicki <tn@semihalf.com> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Tomasz Nowicki <tn@semihalf.com> Cc: Tomasz Nowicki <tn@semihalf.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-11-21 03:01:34 -07:00
iort_init_platform_devices();
ACPI: I/O Remapping Table (IORT) initial support IORT shows representation of IO topology for ARM based systems. It describes how various components are connected together on parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf Initial support allows to detect IORT table presence and save its root pointer obtained through acpi_get_table(). The pointer validity depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap is not set while using IORT nodes we would dereference unmapped pointers. For the aforementioned reason call acpi_iort_init() from acpi_init() which guarantees acpi_gbl_permanent_mmap to be set at that point. Add generic helpers which are helpful for scanning and retrieving information from IORT table content. List of the most important helpers: - iort_find_dev_node() finds IORT node for a given device - iort_node_map_rid() maps device RID and returns IORT node which provides final translation IORT support is placed under drivers/acpi/arm64/ new directory due to its ARM64 specific nature. The code there is considered only for ARM64. The long term plan is to keep all ARM64 specific tables support in this place e.g. GTDT table. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-12 12:54:20 -06:00
}