2008-09-16 15:21:11 -06:00
|
|
|
/* DVB compliant Linux driver for the DVB-S si2109/2110 demodulator
|
|
|
|
*
|
|
|
|
* Copyright (C) 2008 Igor M. Liplianin (liplianin@me.by)
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License as published by
|
|
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
|
|
* (at your option) any later version.
|
|
|
|
*
|
|
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/string.h>
|
|
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/jiffies.h>
|
|
|
|
#include <asm/div64.h>
|
|
|
|
|
2017-12-28 11:03:51 -07:00
|
|
|
#include <media/dvb_frontend.h>
|
2008-09-16 15:21:11 -06:00
|
|
|
#include "si21xx.h"
|
|
|
|
|
|
|
|
#define REVISION_REG 0x00
|
|
|
|
#define SYSTEM_MODE_REG 0x01
|
|
|
|
#define TS_CTRL_REG_1 0x02
|
|
|
|
#define TS_CTRL_REG_2 0x03
|
|
|
|
#define PIN_CTRL_REG_1 0x04
|
|
|
|
#define PIN_CTRL_REG_2 0x05
|
|
|
|
#define LOCK_STATUS_REG_1 0x0f
|
|
|
|
#define LOCK_STATUS_REG_2 0x10
|
|
|
|
#define ACQ_STATUS_REG 0x11
|
|
|
|
#define ACQ_CTRL_REG_1 0x13
|
|
|
|
#define ACQ_CTRL_REG_2 0x14
|
|
|
|
#define PLL_DIVISOR_REG 0x15
|
|
|
|
#define COARSE_TUNE_REG 0x16
|
|
|
|
#define FINE_TUNE_REG_L 0x17
|
|
|
|
#define FINE_TUNE_REG_H 0x18
|
|
|
|
|
|
|
|
#define ANALOG_AGC_POWER_LEVEL_REG 0x28
|
|
|
|
#define CFO_ESTIMATOR_CTRL_REG_1 0x29
|
|
|
|
#define CFO_ESTIMATOR_CTRL_REG_2 0x2a
|
|
|
|
#define CFO_ESTIMATOR_CTRL_REG_3 0x2b
|
|
|
|
|
|
|
|
#define SYM_RATE_ESTIMATE_REG_L 0x31
|
|
|
|
#define SYM_RATE_ESTIMATE_REG_M 0x32
|
|
|
|
#define SYM_RATE_ESTIMATE_REG_H 0x33
|
|
|
|
|
|
|
|
#define CFO_ESTIMATOR_OFFSET_REG_L 0x36
|
|
|
|
#define CFO_ESTIMATOR_OFFSET_REG_H 0x37
|
|
|
|
#define CFO_ERROR_REG_L 0x38
|
|
|
|
#define CFO_ERROR_REG_H 0x39
|
|
|
|
#define SYM_RATE_ESTIMATOR_CTRL_REG 0x3a
|
|
|
|
|
|
|
|
#define SYM_RATE_REG_L 0x3f
|
|
|
|
#define SYM_RATE_REG_M 0x40
|
|
|
|
#define SYM_RATE_REG_H 0x41
|
|
|
|
#define SYM_RATE_ESTIMATOR_MAXIMUM_REG 0x42
|
|
|
|
#define SYM_RATE_ESTIMATOR_MINIMUM_REG 0x43
|
|
|
|
|
|
|
|
#define C_N_ESTIMATOR_CTRL_REG 0x7c
|
|
|
|
#define C_N_ESTIMATOR_THRSHLD_REG 0x7d
|
|
|
|
#define C_N_ESTIMATOR_LEVEL_REG_L 0x7e
|
|
|
|
#define C_N_ESTIMATOR_LEVEL_REG_H 0x7f
|
|
|
|
|
|
|
|
#define BLIND_SCAN_CTRL_REG 0x80
|
|
|
|
|
|
|
|
#define LSA_CTRL_REG_1 0x8D
|
|
|
|
#define SPCTRM_TILT_CORR_THRSHLD_REG 0x8f
|
|
|
|
#define ONE_DB_BNDWDTH_THRSHLD_REG 0x90
|
|
|
|
#define TWO_DB_BNDWDTH_THRSHLD_REG 0x91
|
|
|
|
#define THREE_DB_BNDWDTH_THRSHLD_REG 0x92
|
|
|
|
#define INBAND_POWER_THRSHLD_REG 0x93
|
|
|
|
#define REF_NOISE_LVL_MRGN_THRSHLD_REG 0x94
|
|
|
|
|
|
|
|
#define VIT_SRCH_CTRL_REG_1 0xa0
|
|
|
|
#define VIT_SRCH_CTRL_REG_2 0xa1
|
|
|
|
#define VIT_SRCH_CTRL_REG_3 0xa2
|
|
|
|
#define VIT_SRCH_STATUS_REG 0xa3
|
|
|
|
#define VITERBI_BER_COUNT_REG_L 0xab
|
|
|
|
#define REED_SOLOMON_CTRL_REG 0xb0
|
|
|
|
#define REED_SOLOMON_ERROR_COUNT_REG_L 0xb1
|
|
|
|
#define PRBS_CTRL_REG 0xb5
|
|
|
|
|
|
|
|
#define LNB_CTRL_REG_1 0xc0
|
|
|
|
#define LNB_CTRL_REG_2 0xc1
|
|
|
|
#define LNB_CTRL_REG_3 0xc2
|
|
|
|
#define LNB_CTRL_REG_4 0xc3
|
|
|
|
#define LNB_CTRL_STATUS_REG 0xc4
|
|
|
|
#define LNB_FIFO_REGS_0 0xc5
|
|
|
|
#define LNB_FIFO_REGS_1 0xc6
|
|
|
|
#define LNB_FIFO_REGS_2 0xc7
|
|
|
|
#define LNB_FIFO_REGS_3 0xc8
|
|
|
|
#define LNB_FIFO_REGS_4 0xc9
|
|
|
|
#define LNB_FIFO_REGS_5 0xca
|
|
|
|
#define LNB_SUPPLY_CTRL_REG_1 0xcb
|
|
|
|
#define LNB_SUPPLY_CTRL_REG_2 0xcc
|
|
|
|
#define LNB_SUPPLY_CTRL_REG_3 0xcd
|
|
|
|
#define LNB_SUPPLY_CTRL_REG_4 0xce
|
|
|
|
#define LNB_SUPPLY_STATUS_REG 0xcf
|
|
|
|
|
|
|
|
#define FAIL -1
|
|
|
|
#define PASS 0
|
|
|
|
|
|
|
|
#define ALLOWABLE_FS_COUNT 10
|
|
|
|
#define STATUS_BER 0
|
|
|
|
#define STATUS_UCBLOCKS 1
|
|
|
|
|
|
|
|
static int debug;
|
|
|
|
#define dprintk(args...) \
|
|
|
|
do { \
|
|
|
|
if (debug) \
|
|
|
|
printk(KERN_DEBUG "si21xx: " args); \
|
|
|
|
} while (0)
|
|
|
|
|
|
|
|
enum {
|
|
|
|
ACTIVE_HIGH,
|
|
|
|
ACTIVE_LOW
|
|
|
|
};
|
|
|
|
enum {
|
|
|
|
BYTE_WIDE,
|
|
|
|
BIT_WIDE
|
|
|
|
};
|
|
|
|
enum {
|
|
|
|
CLK_GAPPED_MODE,
|
|
|
|
CLK_CONTINUOUS_MODE
|
|
|
|
};
|
|
|
|
enum {
|
|
|
|
RISING_EDGE,
|
|
|
|
FALLING_EDGE
|
|
|
|
};
|
|
|
|
enum {
|
|
|
|
MSB_FIRST,
|
|
|
|
LSB_FIRST
|
|
|
|
};
|
|
|
|
enum {
|
|
|
|
SERIAL,
|
|
|
|
PARALLEL
|
|
|
|
};
|
|
|
|
|
|
|
|
struct si21xx_state {
|
|
|
|
struct i2c_adapter *i2c;
|
|
|
|
const struct si21xx_config *config;
|
|
|
|
struct dvb_frontend frontend;
|
|
|
|
u8 initialised:1;
|
|
|
|
int errmode;
|
|
|
|
int fs; /*Sampling rate of the ADC in MHz*/
|
|
|
|
};
|
|
|
|
|
|
|
|
/* register default initialization */
|
|
|
|
static u8 serit_sp1511lhb_inittab[] = {
|
|
|
|
0x01, 0x28, /* set i2c_inc_disable */
|
|
|
|
0x20, 0x03,
|
|
|
|
0x27, 0x20,
|
|
|
|
0xe0, 0x45,
|
|
|
|
0xe1, 0x08,
|
|
|
|
0xfe, 0x01,
|
|
|
|
0x01, 0x28,
|
|
|
|
0x89, 0x09,
|
|
|
|
0x04, 0x80,
|
|
|
|
0x05, 0x01,
|
|
|
|
0x06, 0x00,
|
|
|
|
0x20, 0x03,
|
|
|
|
0x24, 0x88,
|
|
|
|
0x29, 0x09,
|
|
|
|
0x2a, 0x0f,
|
|
|
|
0x2c, 0x10,
|
|
|
|
0x2d, 0x19,
|
|
|
|
0x2e, 0x08,
|
|
|
|
0x2f, 0x10,
|
|
|
|
0x30, 0x19,
|
|
|
|
0x34, 0x20,
|
|
|
|
0x35, 0x03,
|
|
|
|
0x45, 0x02,
|
|
|
|
0x46, 0x45,
|
|
|
|
0x47, 0xd0,
|
|
|
|
0x48, 0x00,
|
|
|
|
0x49, 0x40,
|
|
|
|
0x4a, 0x03,
|
|
|
|
0x4c, 0xfd,
|
|
|
|
0x4f, 0x2e,
|
|
|
|
0x50, 0x2e,
|
|
|
|
0x51, 0x10,
|
|
|
|
0x52, 0x10,
|
|
|
|
0x56, 0x92,
|
|
|
|
0x59, 0x00,
|
|
|
|
0x5a, 0x2d,
|
|
|
|
0x5b, 0x33,
|
|
|
|
0x5c, 0x1f,
|
|
|
|
0x5f, 0x76,
|
|
|
|
0x62, 0xc0,
|
|
|
|
0x63, 0xc0,
|
|
|
|
0x64, 0xf3,
|
|
|
|
0x65, 0xf3,
|
|
|
|
0x79, 0x40,
|
|
|
|
0x6a, 0x40,
|
|
|
|
0x6b, 0x0a,
|
|
|
|
0x6c, 0x80,
|
|
|
|
0x6d, 0x27,
|
|
|
|
0x71, 0x06,
|
|
|
|
0x75, 0x60,
|
|
|
|
0x78, 0x00,
|
|
|
|
0x79, 0xb5,
|
|
|
|
0x7c, 0x05,
|
|
|
|
0x7d, 0x1a,
|
|
|
|
0x87, 0x55,
|
|
|
|
0x88, 0x72,
|
|
|
|
0x8f, 0x08,
|
|
|
|
0x90, 0xe0,
|
|
|
|
0x94, 0x40,
|
|
|
|
0xa0, 0x3f,
|
|
|
|
0xa1, 0xc0,
|
|
|
|
0xa4, 0xcc,
|
|
|
|
0xa5, 0x66,
|
|
|
|
0xa6, 0x66,
|
|
|
|
0xa7, 0x7b,
|
|
|
|
0xa8, 0x7b,
|
|
|
|
0xa9, 0x7b,
|
|
|
|
0xaa, 0x9a,
|
|
|
|
0xed, 0x04,
|
|
|
|
0xad, 0x00,
|
|
|
|
0xae, 0x03,
|
|
|
|
0xcc, 0xab,
|
|
|
|
0x01, 0x08,
|
|
|
|
0xff, 0xff
|
|
|
|
};
|
|
|
|
|
|
|
|
/* low level read/writes */
|
|
|
|
static int si21_writeregs(struct si21xx_state *state, u8 reg1,
|
|
|
|
u8 *data, int len)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
u8 buf[60];/* = { reg1, data };*/
|
|
|
|
struct i2c_msg msg = {
|
|
|
|
.addr = state->config->demod_address,
|
|
|
|
.flags = 0,
|
|
|
|
.buf = buf,
|
|
|
|
.len = len + 1
|
|
|
|
};
|
|
|
|
|
2014-09-09 06:05:28 -06:00
|
|
|
if (len > sizeof(buf) - 1)
|
|
|
|
return -EINVAL;
|
|
|
|
|
2008-09-16 15:21:11 -06:00
|
|
|
msg.buf[0] = reg1;
|
|
|
|
memcpy(msg.buf + 1, data, len);
|
|
|
|
|
|
|
|
ret = i2c_transfer(state->i2c, &msg, 1);
|
|
|
|
|
|
|
|
if (ret != 1)
|
[media] dvb-frontends: don't break long lines
Due to the 80-cols restrictions, and latter due to checkpatch
warnings, several strings were broken into multiple lines. This
is not considered a good practice anymore, as it makes harder
to grep for strings at the source code.
As we're right now fixing other drivers due to KERN_CONT, we need
to be able to identify what printk strings don't end with a "\n".
It is a way easier to detect those if we don't break long lines.
So, join those continuation lines.
The patch was generated via the script below, and manually
adjusted if needed.
</script>
use Text::Tabs;
while (<>) {
if ($next ne "") {
$c=$_;
if ($c =~ /^\s+\"(.*)/) {
$c2=$1;
$next =~ s/\"\n$//;
$n = expand($next);
$funpos = index($n, '(');
$pos = index($c2, '",');
if ($funpos && $pos > 0) {
$s1 = substr $c2, 0, $pos + 2;
$s2 = ' ' x ($funpos + 1) . substr $c2, $pos + 2;
$s2 =~ s/^\s+//;
$s2 = ' ' x ($funpos + 1) . $s2 if ($s2 ne "");
print unexpand("$next$s1\n");
print unexpand("$s2\n") if ($s2 ne "");
} else {
print "$next$c2\n";
}
$next="";
next;
} else {
print $next;
}
$next="";
} else {
if (m/\"$/) {
if (!m/\\n\"$/) {
$next=$_;
next;
}
}
}
print $_;
}
</script>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-18 13:44:22 -06:00
|
|
|
dprintk("%s: writereg error (reg1 == 0x%02x, data == 0x%02x, ret == %i)\n",
|
|
|
|
__func__, reg1, data[0], ret);
|
2008-09-16 15:21:11 -06:00
|
|
|
|
|
|
|
return (ret != 1) ? -EREMOTEIO : 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int si21_writereg(struct si21xx_state *state, u8 reg, u8 data)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
u8 buf[] = { reg, data };
|
|
|
|
struct i2c_msg msg = {
|
|
|
|
.addr = state->config->demod_address,
|
|
|
|
.flags = 0,
|
|
|
|
.buf = buf,
|
|
|
|
.len = 2
|
|
|
|
};
|
|
|
|
|
|
|
|
ret = i2c_transfer(state->i2c, &msg, 1);
|
|
|
|
|
|
|
|
if (ret != 1)
|
[media] dvb-frontends: don't break long lines
Due to the 80-cols restrictions, and latter due to checkpatch
warnings, several strings were broken into multiple lines. This
is not considered a good practice anymore, as it makes harder
to grep for strings at the source code.
As we're right now fixing other drivers due to KERN_CONT, we need
to be able to identify what printk strings don't end with a "\n".
It is a way easier to detect those if we don't break long lines.
So, join those continuation lines.
The patch was generated via the script below, and manually
adjusted if needed.
</script>
use Text::Tabs;
while (<>) {
if ($next ne "") {
$c=$_;
if ($c =~ /^\s+\"(.*)/) {
$c2=$1;
$next =~ s/\"\n$//;
$n = expand($next);
$funpos = index($n, '(');
$pos = index($c2, '",');
if ($funpos && $pos > 0) {
$s1 = substr $c2, 0, $pos + 2;
$s2 = ' ' x ($funpos + 1) . substr $c2, $pos + 2;
$s2 =~ s/^\s+//;
$s2 = ' ' x ($funpos + 1) . $s2 if ($s2 ne "");
print unexpand("$next$s1\n");
print unexpand("$s2\n") if ($s2 ne "");
} else {
print "$next$c2\n";
}
$next="";
next;
} else {
print $next;
}
$next="";
} else {
if (m/\"$/) {
if (!m/\\n\"$/) {
$next=$_;
next;
}
}
}
print $_;
}
</script>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-18 13:44:22 -06:00
|
|
|
dprintk("%s: writereg error (reg == 0x%02x, data == 0x%02x, ret == %i)\n",
|
|
|
|
__func__, reg, data, ret);
|
2008-09-16 15:21:11 -06:00
|
|
|
|
|
|
|
return (ret != 1) ? -EREMOTEIO : 0;
|
|
|
|
}
|
|
|
|
|
2010-08-25 06:50:20 -06:00
|
|
|
static int si21_write(struct dvb_frontend *fe, const u8 buf[], int len)
|
2008-09-16 15:21:11 -06:00
|
|
|
{
|
|
|
|
struct si21xx_state *state = fe->demodulator_priv;
|
|
|
|
|
|
|
|
if (len != 2)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
return si21_writereg(state, buf[0], buf[1]);
|
|
|
|
}
|
|
|
|
|
|
|
|
static u8 si21_readreg(struct si21xx_state *state, u8 reg)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
u8 b0[] = { reg };
|
|
|
|
u8 b1[] = { 0 };
|
|
|
|
struct i2c_msg msg[] = {
|
|
|
|
{
|
|
|
|
.addr = state->config->demod_address,
|
|
|
|
.flags = 0,
|
|
|
|
.buf = b0,
|
|
|
|
.len = 1
|
|
|
|
}, {
|
|
|
|
.addr = state->config->demod_address,
|
|
|
|
.flags = I2C_M_RD,
|
|
|
|
.buf = b1,
|
|
|
|
.len = 1
|
|
|
|
}
|
|
|
|
};
|
|
|
|
|
|
|
|
ret = i2c_transfer(state->i2c, msg, 2);
|
|
|
|
|
|
|
|
if (ret != 2)
|
|
|
|
dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n",
|
|
|
|
__func__, reg, ret);
|
|
|
|
|
|
|
|
return b1[0];
|
|
|
|
}
|
|
|
|
|
|
|
|
static int si21_readregs(struct si21xx_state *state, u8 reg1, u8 *b, u8 len)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
struct i2c_msg msg[] = {
|
|
|
|
{
|
|
|
|
.addr = state->config->demod_address,
|
|
|
|
.flags = 0,
|
|
|
|
.buf = ®1,
|
|
|
|
.len = 1
|
|
|
|
}, {
|
|
|
|
.addr = state->config->demod_address,
|
|
|
|
.flags = I2C_M_RD,
|
|
|
|
.buf = b,
|
|
|
|
.len = len
|
|
|
|
}
|
|
|
|
};
|
|
|
|
|
|
|
|
ret = i2c_transfer(state->i2c, msg, 2);
|
|
|
|
|
|
|
|
if (ret != 2)
|
|
|
|
dprintk("%s: readreg error (ret == %i)\n", __func__, ret);
|
|
|
|
|
|
|
|
return ret == 2 ? 0 : -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int si21xx_wait_diseqc_idle(struct si21xx_state *state, int timeout)
|
|
|
|
{
|
|
|
|
unsigned long start = jiffies;
|
|
|
|
|
|
|
|
dprintk("%s\n", __func__);
|
|
|
|
|
|
|
|
while ((si21_readreg(state, LNB_CTRL_REG_1) & 0x8) == 8) {
|
|
|
|
if (jiffies - start > timeout) {
|
|
|
|
dprintk("%s: timeout!!\n", __func__);
|
|
|
|
return -ETIMEDOUT;
|
|
|
|
}
|
|
|
|
msleep(10);
|
2012-09-28 02:37:22 -06:00
|
|
|
}
|
2008-09-16 15:21:11 -06:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int si21xx_set_symbolrate(struct dvb_frontend *fe, u32 srate)
|
|
|
|
{
|
|
|
|
struct si21xx_state *state = fe->demodulator_priv;
|
|
|
|
u32 sym_rate, data_rate;
|
|
|
|
int i;
|
|
|
|
u8 sym_rate_bytes[3];
|
|
|
|
|
|
|
|
dprintk("%s : srate = %i\n", __func__ , srate);
|
|
|
|
|
|
|
|
if ((srate < 1000000) || (srate > 45000000))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
data_rate = srate;
|
|
|
|
sym_rate = 0;
|
|
|
|
|
|
|
|
for (i = 0; i < 4; ++i) {
|
|
|
|
sym_rate /= 100;
|
|
|
|
sym_rate = sym_rate + ((data_rate % 100) * 0x800000) /
|
|
|
|
state->fs;
|
|
|
|
data_rate /= 100;
|
|
|
|
}
|
|
|
|
for (i = 0; i < 3; ++i)
|
|
|
|
sym_rate_bytes[i] = (u8)((sym_rate >> (i * 8)) & 0xff);
|
|
|
|
|
|
|
|
si21_writeregs(state, SYM_RATE_REG_L, sym_rate_bytes, 0x03);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int si21xx_send_diseqc_msg(struct dvb_frontend *fe,
|
|
|
|
struct dvb_diseqc_master_cmd *m)
|
|
|
|
{
|
|
|
|
struct si21xx_state *state = fe->demodulator_priv;
|
|
|
|
u8 lnb_status;
|
|
|
|
u8 LNB_CTRL_1;
|
|
|
|
int status;
|
|
|
|
|
|
|
|
dprintk("%s\n", __func__);
|
|
|
|
|
|
|
|
status = PASS;
|
|
|
|
LNB_CTRL_1 = 0;
|
|
|
|
|
|
|
|
status |= si21_readregs(state, LNB_CTRL_STATUS_REG, &lnb_status, 0x01);
|
|
|
|
status |= si21_readregs(state, LNB_CTRL_REG_1, &lnb_status, 0x01);
|
|
|
|
|
|
|
|
/*fill the FIFO*/
|
|
|
|
status |= si21_writeregs(state, LNB_FIFO_REGS_0, m->msg, m->msg_len);
|
|
|
|
|
|
|
|
LNB_CTRL_1 = (lnb_status & 0x70);
|
|
|
|
LNB_CTRL_1 |= m->msg_len;
|
|
|
|
|
|
|
|
LNB_CTRL_1 |= 0x80; /* begin LNB signaling */
|
|
|
|
|
|
|
|
status |= si21_writeregs(state, LNB_CTRL_REG_1, &LNB_CTRL_1, 0x01);
|
|
|
|
|
|
|
|
return status;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int si21xx_send_diseqc_burst(struct dvb_frontend *fe,
|
2015-06-07 11:53:52 -06:00
|
|
|
enum fe_sec_mini_cmd burst)
|
2008-09-16 15:21:11 -06:00
|
|
|
{
|
|
|
|
struct si21xx_state *state = fe->demodulator_priv;
|
|
|
|
u8 val;
|
|
|
|
|
|
|
|
dprintk("%s\n", __func__);
|
|
|
|
|
|
|
|
if (si21xx_wait_diseqc_idle(state, 100) < 0)
|
|
|
|
return -ETIMEDOUT;
|
|
|
|
|
|
|
|
val = (0x80 | si21_readreg(state, 0xc1));
|
|
|
|
if (si21_writereg(state, LNB_CTRL_REG_1,
|
|
|
|
burst == SEC_MINI_A ? (val & ~0x10) : (val | 0x10)))
|
|
|
|
return -EREMOTEIO;
|
|
|
|
|
|
|
|
if (si21xx_wait_diseqc_idle(state, 100) < 0)
|
|
|
|
return -ETIMEDOUT;
|
|
|
|
|
|
|
|
if (si21_writereg(state, LNB_CTRL_REG_1, val))
|
|
|
|
return -EREMOTEIO;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
/* 30.06.2008 */
|
2015-06-07 11:53:52 -06:00
|
|
|
static int si21xx_set_tone(struct dvb_frontend *fe, enum fe_sec_tone_mode tone)
|
2008-09-16 15:21:11 -06:00
|
|
|
{
|
|
|
|
struct si21xx_state *state = fe->demodulator_priv;
|
|
|
|
u8 val;
|
|
|
|
|
|
|
|
dprintk("%s\n", __func__);
|
|
|
|
val = (0x80 | si21_readreg(state, LNB_CTRL_REG_1));
|
|
|
|
|
|
|
|
switch (tone) {
|
|
|
|
case SEC_TONE_ON:
|
|
|
|
return si21_writereg(state, LNB_CTRL_REG_1, val | 0x20);
|
|
|
|
|
|
|
|
case SEC_TONE_OFF:
|
|
|
|
return si21_writereg(state, LNB_CTRL_REG_1, (val & ~0x20));
|
|
|
|
|
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2015-06-07 11:53:52 -06:00
|
|
|
static int si21xx_set_voltage(struct dvb_frontend *fe, enum fe_sec_voltage volt)
|
2008-09-16 15:21:11 -06:00
|
|
|
{
|
|
|
|
struct si21xx_state *state = fe->demodulator_priv;
|
|
|
|
|
|
|
|
u8 val;
|
|
|
|
dprintk("%s: %s\n", __func__,
|
|
|
|
volt == SEC_VOLTAGE_13 ? "SEC_VOLTAGE_13" :
|
|
|
|
volt == SEC_VOLTAGE_18 ? "SEC_VOLTAGE_18" : "??");
|
|
|
|
|
|
|
|
|
|
|
|
val = (0x80 | si21_readreg(state, LNB_CTRL_REG_1));
|
|
|
|
|
|
|
|
switch (volt) {
|
|
|
|
case SEC_VOLTAGE_18:
|
|
|
|
return si21_writereg(state, LNB_CTRL_REG_1, val | 0x40);
|
|
|
|
break;
|
|
|
|
case SEC_VOLTAGE_13:
|
|
|
|
return si21_writereg(state, LNB_CTRL_REG_1, (val & ~0x40));
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return -EINVAL;
|
2012-09-28 02:37:22 -06:00
|
|
|
}
|
2008-09-16 15:21:11 -06:00
|
|
|
}
|
|
|
|
|
|
|
|
static int si21xx_init(struct dvb_frontend *fe)
|
|
|
|
{
|
|
|
|
struct si21xx_state *state = fe->demodulator_priv;
|
|
|
|
int i;
|
|
|
|
int status = 0;
|
|
|
|
u8 reg1;
|
|
|
|
u8 val;
|
|
|
|
u8 reg2[2];
|
|
|
|
|
|
|
|
dprintk("%s\n", __func__);
|
|
|
|
|
|
|
|
for (i = 0; ; i += 2) {
|
|
|
|
reg1 = serit_sp1511lhb_inittab[i];
|
|
|
|
val = serit_sp1511lhb_inittab[i+1];
|
|
|
|
if (reg1 == 0xff && val == 0xff)
|
|
|
|
break;
|
|
|
|
si21_writeregs(state, reg1, &val, 1);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*DVB QPSK SYSTEM MODE REG*/
|
|
|
|
reg1 = 0x08;
|
|
|
|
si21_writeregs(state, SYSTEM_MODE_REG, ®1, 0x01);
|
|
|
|
|
|
|
|
/*transport stream config*/
|
|
|
|
/*
|
|
|
|
mode = PARALLEL;
|
|
|
|
sdata_form = LSB_FIRST;
|
|
|
|
clk_edge = FALLING_EDGE;
|
|
|
|
clk_mode = CLK_GAPPED_MODE;
|
|
|
|
strt_len = BYTE_WIDE;
|
|
|
|
sync_pol = ACTIVE_HIGH;
|
|
|
|
val_pol = ACTIVE_HIGH;
|
|
|
|
err_pol = ACTIVE_HIGH;
|
|
|
|
sclk_rate = 0x00;
|
|
|
|
parity = 0x00 ;
|
|
|
|
data_delay = 0x00;
|
|
|
|
clk_delay = 0x00;
|
|
|
|
pclk_smooth = 0x00;
|
|
|
|
*/
|
|
|
|
reg2[0] =
|
|
|
|
PARALLEL + (LSB_FIRST << 1)
|
|
|
|
+ (FALLING_EDGE << 2) + (CLK_GAPPED_MODE << 3)
|
|
|
|
+ (BYTE_WIDE << 4) + (ACTIVE_HIGH << 5)
|
|
|
|
+ (ACTIVE_HIGH << 6) + (ACTIVE_HIGH << 7);
|
|
|
|
|
|
|
|
reg2[1] = 0;
|
|
|
|
/* sclk_rate + (parity << 2)
|
|
|
|
+ (data_delay << 3) + (clk_delay << 4)
|
|
|
|
+ (pclk_smooth << 5);
|
|
|
|
*/
|
|
|
|
status |= si21_writeregs(state, TS_CTRL_REG_1, reg2, 0x02);
|
|
|
|
if (status != 0)
|
|
|
|
dprintk(" %s : TS Set Error\n", __func__);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
}
|
|
|
|
|
2015-06-07 11:53:52 -06:00
|
|
|
static int si21_read_status(struct dvb_frontend *fe, enum fe_status *status)
|
2008-09-16 15:21:11 -06:00
|
|
|
{
|
|
|
|
struct si21xx_state *state = fe->demodulator_priv;
|
|
|
|
u8 regs_read[2];
|
|
|
|
u8 reg_read;
|
|
|
|
u8 i;
|
|
|
|
u8 lock;
|
|
|
|
u8 signal = si21_readreg(state, ANALOG_AGC_POWER_LEVEL_REG);
|
|
|
|
|
|
|
|
si21_readregs(state, LOCK_STATUS_REG_1, regs_read, 0x02);
|
|
|
|
reg_read = 0;
|
|
|
|
|
|
|
|
for (i = 0; i < 7; ++i)
|
|
|
|
reg_read |= ((regs_read[0] >> i) & 0x01) << (6 - i);
|
|
|
|
|
|
|
|
lock = ((reg_read & 0x7f) | (regs_read[1] & 0x80));
|
|
|
|
|
|
|
|
dprintk("%s : FE_READ_STATUS : VSTATUS: 0x%02x\n", __func__, lock);
|
|
|
|
*status = 0;
|
|
|
|
|
|
|
|
if (signal > 10)
|
|
|
|
*status |= FE_HAS_SIGNAL;
|
|
|
|
|
|
|
|
if (lock & 0x2)
|
|
|
|
*status |= FE_HAS_CARRIER;
|
|
|
|
|
|
|
|
if (lock & 0x20)
|
|
|
|
*status |= FE_HAS_VITERBI;
|
|
|
|
|
|
|
|
if (lock & 0x40)
|
|
|
|
*status |= FE_HAS_SYNC;
|
|
|
|
|
|
|
|
if ((lock & 0x7b) == 0x7b)
|
|
|
|
*status |= FE_HAS_LOCK;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int si21_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
|
|
|
|
{
|
|
|
|
struct si21xx_state *state = fe->demodulator_priv;
|
|
|
|
|
|
|
|
/*status = si21_readreg(state, ANALOG_AGC_POWER_LEVEL_REG,
|
|
|
|
(u8*)agclevel, 0x01);*/
|
|
|
|
|
|
|
|
u16 signal = (3 * si21_readreg(state, 0x27) *
|
|
|
|
si21_readreg(state, 0x28));
|
|
|
|
|
|
|
|
dprintk("%s : AGCPWR: 0x%02x%02x, signal=0x%04x\n", __func__,
|
|
|
|
si21_readreg(state, 0x27),
|
|
|
|
si21_readreg(state, 0x28), (int) signal);
|
|
|
|
|
|
|
|
signal <<= 4;
|
|
|
|
*strength = signal;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int si21_read_ber(struct dvb_frontend *fe, u32 *ber)
|
|
|
|
{
|
|
|
|
struct si21xx_state *state = fe->demodulator_priv;
|
|
|
|
|
|
|
|
dprintk("%s\n", __func__);
|
|
|
|
|
|
|
|
if (state->errmode != STATUS_BER)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
*ber = (si21_readreg(state, 0x1d) << 8) |
|
|
|
|
si21_readreg(state, 0x1e);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int si21_read_snr(struct dvb_frontend *fe, u16 *snr)
|
|
|
|
{
|
|
|
|
struct si21xx_state *state = fe->demodulator_priv;
|
|
|
|
|
|
|
|
s32 xsnr = 0xffff - ((si21_readreg(state, 0x24) << 8) |
|
|
|
|
si21_readreg(state, 0x25));
|
|
|
|
xsnr = 3 * (xsnr - 0xa100);
|
|
|
|
*snr = (xsnr > 0xffff) ? 0xffff : (xsnr < 0) ? 0 : xsnr;
|
|
|
|
|
|
|
|
dprintk("%s\n", __func__);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int si21_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
|
|
|
|
{
|
|
|
|
struct si21xx_state *state = fe->demodulator_priv;
|
|
|
|
|
|
|
|
dprintk("%s\n", __func__);
|
|
|
|
|
|
|
|
if (state->errmode != STATUS_UCBLOCKS)
|
|
|
|
*ucblocks = 0;
|
|
|
|
else
|
|
|
|
*ucblocks = (si21_readreg(state, 0x1d) << 8) |
|
|
|
|
si21_readreg(state, 0x1e);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* initiates a channel acquisition sequence
|
|
|
|
using the specified symbol rate and code rate */
|
|
|
|
static int si21xx_setacquire(struct dvb_frontend *fe, int symbrate,
|
2015-06-07 11:53:52 -06:00
|
|
|
enum fe_code_rate crate)
|
2008-09-16 15:21:11 -06:00
|
|
|
{
|
|
|
|
|
|
|
|
struct si21xx_state *state = fe->demodulator_priv;
|
|
|
|
u8 coderates[] = {
|
|
|
|
0x0, 0x01, 0x02, 0x04, 0x00,
|
|
|
|
0x8, 0x10, 0x20, 0x00, 0x3f
|
|
|
|
};
|
|
|
|
|
|
|
|
u8 coderate_ptr;
|
|
|
|
int status;
|
|
|
|
u8 start_acq = 0x80;
|
|
|
|
u8 reg, regs[3];
|
|
|
|
|
|
|
|
dprintk("%s\n", __func__);
|
|
|
|
|
|
|
|
status = PASS;
|
|
|
|
coderate_ptr = coderates[crate];
|
|
|
|
|
|
|
|
si21xx_set_symbolrate(fe, symbrate);
|
|
|
|
|
|
|
|
/* write code rates to use in the Viterbi search */
|
|
|
|
status |= si21_writeregs(state,
|
|
|
|
VIT_SRCH_CTRL_REG_1,
|
|
|
|
&coderate_ptr, 0x01);
|
|
|
|
|
|
|
|
/* clear acq_start bit */
|
|
|
|
status |= si21_readregs(state, ACQ_CTRL_REG_2, ®, 0x01);
|
|
|
|
reg &= ~start_acq;
|
|
|
|
status |= si21_writeregs(state, ACQ_CTRL_REG_2, ®, 0x01);
|
|
|
|
|
|
|
|
/* use new Carrier Frequency Offset Estimator (QuickLock) */
|
|
|
|
regs[0] = 0xCB;
|
|
|
|
regs[1] = 0x40;
|
|
|
|
regs[2] = 0xCB;
|
|
|
|
|
|
|
|
status |= si21_writeregs(state,
|
|
|
|
TWO_DB_BNDWDTH_THRSHLD_REG,
|
|
|
|
®s[0], 0x03);
|
|
|
|
reg = 0x56;
|
|
|
|
status |= si21_writeregs(state,
|
|
|
|
LSA_CTRL_REG_1, ®, 1);
|
|
|
|
reg = 0x05;
|
|
|
|
status |= si21_writeregs(state,
|
|
|
|
BLIND_SCAN_CTRL_REG, ®, 1);
|
|
|
|
/* start automatic acq */
|
|
|
|
status |= si21_writeregs(state,
|
|
|
|
ACQ_CTRL_REG_2, &start_acq, 0x01);
|
|
|
|
|
|
|
|
return status;
|
|
|
|
}
|
|
|
|
|
2011-12-26 10:11:35 -07:00
|
|
|
static int si21xx_set_frontend(struct dvb_frontend *fe)
|
2008-09-16 15:21:11 -06:00
|
|
|
{
|
|
|
|
struct si21xx_state *state = fe->demodulator_priv;
|
|
|
|
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
|
|
|
|
|
|
|
|
/* freq Channel carrier frequency in KHz (i.e. 1550000 KHz)
|
|
|
|
datarate Channel symbol rate in Sps (i.e. 22500000 Sps)*/
|
|
|
|
|
|
|
|
/* in MHz */
|
|
|
|
unsigned char coarse_tune_freq;
|
|
|
|
int fine_tune_freq;
|
|
|
|
unsigned char sample_rate = 0;
|
|
|
|
/* boolean */
|
2010-01-12 23:59:15 -07:00
|
|
|
bool inband_interferer_ind;
|
2008-09-16 15:21:11 -06:00
|
|
|
|
|
|
|
/* INTERMEDIATE VALUES */
|
|
|
|
int icoarse_tune_freq; /* MHz */
|
|
|
|
int ifine_tune_freq; /* MHz */
|
|
|
|
unsigned int band_high;
|
|
|
|
unsigned int band_low;
|
|
|
|
unsigned int x1;
|
|
|
|
unsigned int x2;
|
|
|
|
int i;
|
2010-01-12 23:59:15 -07:00
|
|
|
bool inband_interferer_div2[ALLOWABLE_FS_COUNT];
|
|
|
|
bool inband_interferer_div4[ALLOWABLE_FS_COUNT];
|
2008-09-16 15:21:11 -06:00
|
|
|
int status;
|
|
|
|
|
|
|
|
/* allowable sample rates for ADC in MHz */
|
|
|
|
int afs[ALLOWABLE_FS_COUNT] = { 200, 192, 193, 194, 195,
|
|
|
|
196, 204, 205, 206, 207
|
|
|
|
};
|
|
|
|
/* in MHz */
|
|
|
|
int if_limit_high;
|
|
|
|
int if_limit_low;
|
|
|
|
int lnb_lo;
|
|
|
|
int lnb_uncertanity;
|
|
|
|
|
|
|
|
int rf_freq;
|
|
|
|
int data_rate;
|
|
|
|
unsigned char regs[4];
|
|
|
|
|
|
|
|
dprintk("%s : FE_SET_FRONTEND\n", __func__);
|
|
|
|
|
|
|
|
if (c->delivery_system != SYS_DVBS) {
|
|
|
|
dprintk("%s: unsupported delivery system selected (%d)\n",
|
|
|
|
__func__, c->delivery_system);
|
|
|
|
return -EOPNOTSUPP;
|
|
|
|
}
|
|
|
|
|
|
|
|
for (i = 0; i < ALLOWABLE_FS_COUNT; ++i)
|
2010-01-12 23:59:15 -07:00
|
|
|
inband_interferer_div2[i] = inband_interferer_div4[i] = false;
|
2008-09-16 15:21:11 -06:00
|
|
|
|
|
|
|
if_limit_high = -700000;
|
|
|
|
if_limit_low = -100000;
|
|
|
|
/* in MHz */
|
|
|
|
lnb_lo = 0;
|
|
|
|
lnb_uncertanity = 0;
|
|
|
|
|
|
|
|
rf_freq = 10 * c->frequency ;
|
|
|
|
data_rate = c->symbol_rate / 100;
|
|
|
|
|
|
|
|
status = PASS;
|
|
|
|
|
|
|
|
band_low = (rf_freq - lnb_lo) - ((lnb_uncertanity * 200)
|
|
|
|
+ (data_rate * 135)) / 200;
|
|
|
|
|
|
|
|
band_high = (rf_freq - lnb_lo) + ((lnb_uncertanity * 200)
|
|
|
|
+ (data_rate * 135)) / 200;
|
|
|
|
|
|
|
|
|
|
|
|
icoarse_tune_freq = 100000 *
|
|
|
|
(((rf_freq - lnb_lo) -
|
|
|
|
(if_limit_low + if_limit_high) / 2)
|
|
|
|
/ 100000);
|
|
|
|
|
|
|
|
ifine_tune_freq = (rf_freq - lnb_lo) - icoarse_tune_freq ;
|
|
|
|
|
|
|
|
for (i = 0; i < ALLOWABLE_FS_COUNT; ++i) {
|
|
|
|
x1 = ((rf_freq - lnb_lo) / (afs[i] * 2500)) *
|
|
|
|
(afs[i] * 2500) + afs[i] * 2500;
|
|
|
|
|
|
|
|
x2 = ((rf_freq - lnb_lo) / (afs[i] * 2500)) *
|
|
|
|
(afs[i] * 2500);
|
|
|
|
|
|
|
|
if (((band_low < x1) && (x1 < band_high)) ||
|
|
|
|
((band_low < x2) && (x2 < band_high)))
|
2010-01-12 23:59:15 -07:00
|
|
|
inband_interferer_div4[i] = true;
|
2008-09-16 15:21:11 -06:00
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
for (i = 0; i < ALLOWABLE_FS_COUNT; ++i) {
|
|
|
|
x1 = ((rf_freq - lnb_lo) / (afs[i] * 5000)) *
|
|
|
|
(afs[i] * 5000) + afs[i] * 5000;
|
|
|
|
|
|
|
|
x2 = ((rf_freq - lnb_lo) / (afs[i] * 5000)) *
|
|
|
|
(afs[i] * 5000);
|
|
|
|
|
|
|
|
if (((band_low < x1) && (x1 < band_high)) ||
|
|
|
|
((band_low < x2) && (x2 < band_high)))
|
2010-01-12 23:59:15 -07:00
|
|
|
inband_interferer_div2[i] = true;
|
2008-09-16 15:21:11 -06:00
|
|
|
}
|
|
|
|
|
2010-01-12 23:59:15 -07:00
|
|
|
inband_interferer_ind = true;
|
|
|
|
for (i = 0; i < ALLOWABLE_FS_COUNT; ++i) {
|
|
|
|
if (inband_interferer_div2[i] || inband_interferer_div4[i]) {
|
|
|
|
inband_interferer_ind = false;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
2008-09-16 15:21:11 -06:00
|
|
|
|
|
|
|
if (inband_interferer_ind) {
|
|
|
|
for (i = 0; i < ALLOWABLE_FS_COUNT; ++i) {
|
2010-01-12 23:59:15 -07:00
|
|
|
if (!inband_interferer_div2[i]) {
|
2008-09-16 15:21:11 -06:00
|
|
|
sample_rate = (u8) afs[i];
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
for (i = 0; i < ALLOWABLE_FS_COUNT; ++i) {
|
2010-01-12 23:59:15 -07:00
|
|
|
if ((inband_interferer_div2[i] ||
|
|
|
|
!inband_interferer_div4[i])) {
|
2008-09-16 15:21:11 -06:00
|
|
|
sample_rate = (u8) afs[i];
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
if (sample_rate > 207 || sample_rate < 192)
|
|
|
|
sample_rate = 200;
|
|
|
|
|
|
|
|
fine_tune_freq = ((0x4000 * (ifine_tune_freq / 10)) /
|
|
|
|
((sample_rate) * 1000));
|
|
|
|
|
|
|
|
coarse_tune_freq = (u8)(icoarse_tune_freq / 100000);
|
|
|
|
|
|
|
|
regs[0] = sample_rate;
|
|
|
|
regs[1] = coarse_tune_freq;
|
|
|
|
regs[2] = fine_tune_freq & 0xFF;
|
|
|
|
regs[3] = fine_tune_freq >> 8 & 0xFF;
|
|
|
|
|
|
|
|
status |= si21_writeregs(state, PLL_DIVISOR_REG, ®s[0], 0x04);
|
|
|
|
|
|
|
|
state->fs = sample_rate;/*ADC MHz*/
|
|
|
|
si21xx_setacquire(fe, c->symbol_rate, c->fec_inner);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int si21xx_sleep(struct dvb_frontend *fe)
|
|
|
|
{
|
|
|
|
struct si21xx_state *state = fe->demodulator_priv;
|
|
|
|
u8 regdata;
|
|
|
|
|
|
|
|
dprintk("%s\n", __func__);
|
|
|
|
|
|
|
|
si21_readregs(state, SYSTEM_MODE_REG, ®data, 0x01);
|
|
|
|
regdata |= 1 << 6;
|
|
|
|
si21_writeregs(state, SYSTEM_MODE_REG, ®data, 0x01);
|
|
|
|
state->initialised = 0;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void si21xx_release(struct dvb_frontend *fe)
|
|
|
|
{
|
|
|
|
struct si21xx_state *state = fe->demodulator_priv;
|
|
|
|
|
|
|
|
dprintk("%s\n", __func__);
|
|
|
|
|
|
|
|
kfree(state);
|
|
|
|
}
|
|
|
|
|
2016-08-09 15:32:21 -06:00
|
|
|
static const struct dvb_frontend_ops si21xx_ops = {
|
2011-12-26 10:11:35 -07:00
|
|
|
.delsys = { SYS_DVBS },
|
2008-09-16 15:21:11 -06:00
|
|
|
.info = {
|
|
|
|
.name = "SL SI21XX DVB-S",
|
|
|
|
.frequency_min = 950000,
|
|
|
|
.frequency_max = 2150000,
|
|
|
|
.frequency_stepsize = 125, /* kHz for QPSK frontends */
|
|
|
|
.frequency_tolerance = 0,
|
|
|
|
.symbol_rate_min = 1000000,
|
|
|
|
.symbol_rate_max = 45000000,
|
|
|
|
.symbol_rate_tolerance = 500, /* ppm */
|
|
|
|
.caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
|
|
|
|
FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 |
|
|
|
|
FE_CAN_QPSK |
|
|
|
|
FE_CAN_FEC_AUTO
|
|
|
|
},
|
|
|
|
|
|
|
|
.release = si21xx_release,
|
|
|
|
.init = si21xx_init,
|
|
|
|
.sleep = si21xx_sleep,
|
|
|
|
.write = si21_write,
|
|
|
|
.read_status = si21_read_status,
|
|
|
|
.read_ber = si21_read_ber,
|
|
|
|
.read_signal_strength = si21_read_signal_strength,
|
|
|
|
.read_snr = si21_read_snr,
|
|
|
|
.read_ucblocks = si21_read_ucblocks,
|
|
|
|
.diseqc_send_master_cmd = si21xx_send_diseqc_msg,
|
|
|
|
.diseqc_send_burst = si21xx_send_diseqc_burst,
|
|
|
|
.set_tone = si21xx_set_tone,
|
|
|
|
.set_voltage = si21xx_set_voltage,
|
|
|
|
|
2011-12-26 10:11:35 -07:00
|
|
|
.set_frontend = si21xx_set_frontend,
|
2008-09-16 15:21:11 -06:00
|
|
|
};
|
|
|
|
|
|
|
|
struct dvb_frontend *si21xx_attach(const struct si21xx_config *config,
|
|
|
|
struct i2c_adapter *i2c)
|
|
|
|
{
|
|
|
|
struct si21xx_state *state = NULL;
|
|
|
|
int id;
|
|
|
|
|
|
|
|
dprintk("%s\n", __func__);
|
|
|
|
|
|
|
|
/* allocate memory for the internal state */
|
2009-08-10 19:51:01 -06:00
|
|
|
state = kzalloc(sizeof(struct si21xx_state), GFP_KERNEL);
|
2008-09-16 15:21:11 -06:00
|
|
|
if (state == NULL)
|
|
|
|
goto error;
|
|
|
|
|
|
|
|
/* setup the state */
|
|
|
|
state->config = config;
|
|
|
|
state->i2c = i2c;
|
|
|
|
state->initialised = 0;
|
|
|
|
state->errmode = STATUS_BER;
|
|
|
|
|
|
|
|
/* check if the demod is there */
|
|
|
|
id = si21_readreg(state, SYSTEM_MODE_REG);
|
|
|
|
si21_writereg(state, SYSTEM_MODE_REG, id | 0x40); /* standby off */
|
|
|
|
msleep(200);
|
|
|
|
id = si21_readreg(state, 0x00);
|
|
|
|
|
|
|
|
/* register 0x00 contains:
|
|
|
|
0x34 for SI2107
|
|
|
|
0x24 for SI2108
|
|
|
|
0x14 for SI2109
|
|
|
|
0x04 for SI2110
|
|
|
|
*/
|
|
|
|
if (id != 0x04 && id != 0x14)
|
|
|
|
goto error;
|
|
|
|
|
|
|
|
/* create dvb_frontend */
|
|
|
|
memcpy(&state->frontend.ops, &si21xx_ops,
|
|
|
|
sizeof(struct dvb_frontend_ops));
|
|
|
|
state->frontend.demodulator_priv = state;
|
|
|
|
return &state->frontend;
|
|
|
|
|
|
|
|
error:
|
|
|
|
kfree(state);
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(si21xx_attach);
|
|
|
|
|
|
|
|
module_param(debug, int, 0644);
|
|
|
|
MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
|
|
|
|
|
|
|
|
MODULE_DESCRIPTION("SL SI21XX DVB Demodulator driver");
|
|
|
|
MODULE_AUTHOR("Igor M. Liplianin");
|
|
|
|
MODULE_LICENSE("GPL");
|