redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity
alistair23-linux/arch/arm/mach-rockchip/rockchip.c

85 lines
2.2 KiB
C
Raw Normal View History

arm: add basic support for Rockchip RK3066a boards This adds a generic devicetree board file and a dtsi for boards based on the RK3066a SoCs from Rockchip. Apart from the generic parts (gic, clocks, pinctrl) the only components currently supported are the timers, uarts and mmc ports (all DesignWare- based). Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Olof Johansson <olof@lixom.net>
2013-06-02 15:09:41 -06:00
/*
* Device Tree support for Rockchip SoCs
*
* Copyright (c) 2013 MundoReader S.L.
* Author: Heiko Stuebner <heiko@sntech.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/kernel.h>
#include <linux/init.h>
clk: Remove io.h from clk-provider.h Now that we've gotten rid of clk_readl() we can remove io.h from the clk-provider header and push out the io.h include to any code that isn't already including the io.h header but using things like readl/writel, etc. Found with this grep: git grep -l clk-provider.h | grep '.c$' | xargs git grep -L 'linux/io.h' | \ xargs git grep -l \ -e '\<__iowrite32_copy\>' --or \ -e '\<__ioread32_copy\>' --or \ -e '\<__iowrite64_copy\>' --or \ -e '\<ioremap_page_range\>' --or \ -e '\<ioremap_huge_init\>' --or \ -e '\<arch_ioremap_pud_supported\>' --or \ -e '\<arch_ioremap_pmd_supported\>' --or \ -e '\<devm_ioport_map\>' --or \ -e '\<devm_ioport_unmap\>' --or \ -e '\<IOMEM_ERR_PTR\>' --or \ -e '\<devm_ioremap\>' --or \ -e '\<devm_ioremap_nocache\>' --or \ -e '\<devm_ioremap_wc\>' --or \ -e '\<devm_iounmap\>' --or \ -e '\<devm_ioremap_release\>' --or \ -e '\<devm_memremap\>' --or \ -e '\<devm_memunmap\>' --or \ -e '\<__devm_memremap_pages\>' --or \ -e '\<pci_remap_cfgspace\>' --or \ -e '\<arch_has_dev_port\>' --or \ -e '\<arch_phys_wc_add\>' --or \ -e '\<arch_phys_wc_del\>' --or \ -e '\<memremap\>' --or \ -e '\<memunmap\>' --or \ -e '\<arch_io_reserve_memtype_wc\>' --or \ -e '\<arch_io_free_memtype_wc\>' --or \ -e '\<__io_aw\>' --or \ -e '\<__io_pbw\>' --or \ -e '\<__io_paw\>' --or \ -e '\<__io_pbr\>' --or \ -e '\<__io_par\>' --or \ -e '\<__raw_readb\>' --or \ -e '\<__raw_readw\>' --or \ -e '\<__raw_readl\>' --or \ -e '\<__raw_readq\>' --or \ -e '\<__raw_writeb\>' --or \ -e '\<__raw_writew\>' --or \ -e '\<__raw_writel\>' --or \ -e '\<__raw_writeq\>' --or \ -e '\<readb\>' --or \ -e '\<readw\>' --or \ -e '\<readl\>' --or \ -e '\<readq\>' --or \ -e '\<writeb\>' --or \ -e '\<writew\>' --or \ -e '\<writel\>' --or \ -e '\<writeq\>' --or \ -e '\<readb_relaxed\>' --or \ -e '\<readw_relaxed\>' --or \ -e '\<readl_relaxed\>' --or \ -e '\<readq_relaxed\>' --or \ -e '\<writeb_relaxed\>' --or \ -e '\<writew_relaxed\>' --or \ -e '\<writel_relaxed\>' --or \ -e '\<writeq_relaxed\>' --or \ -e '\<readsb\>' --or \ -e '\<readsw\>' --or \ -e '\<readsl\>' --or \ -e '\<readsq\>' --or \ -e '\<writesb\>' --or \ -e '\<writesw\>' --or \ -e '\<writesl\>' --or \ -e '\<writesq\>' --or \ -e '\<inb\>' --or \ -e '\<inw\>' --or \ -e '\<inl\>' --or \ -e '\<outb\>' --or \ -e '\<outw\>' --or \ -e '\<outl\>' --or \ -e '\<inb_p\>' --or \ -e '\<inw_p\>' --or \ -e '\<inl_p\>' --or \ -e '\<outb_p\>' --or \ -e '\<outw_p\>' --or \ -e '\<outl_p\>' --or \ -e '\<insb\>' --or \ -e '\<insw\>' --or \ -e '\<insl\>' --or \ -e '\<outsb\>' --or \ -e '\<outsw\>' --or \ -e '\<outsl\>' --or \ -e '\<insb_p\>' --or \ -e '\<insw_p\>' --or \ -e '\<insl_p\>' --or \ -e '\<outsb_p\>' --or \ -e '\<outsw_p\>' --or \ -e '\<outsl_p\>' --or \ -e '\<ioread8\>' --or \ -e '\<ioread16\>' --or \ -e '\<ioread32\>' --or \ -e '\<ioread64\>' --or \ -e '\<iowrite8\>' --or \ -e '\<iowrite16\>' --or \ -e '\<iowrite32\>' --or \ -e '\<iowrite64\>' --or \ -e '\<ioread16be\>' --or \ -e '\<ioread32be\>' --or \ -e '\<ioread64be\>' --or \ -e '\<iowrite16be\>' --or \ -e '\<iowrite32be\>' --or \ -e '\<iowrite64be\>' --or \ -e '\<ioread8_rep\>' --or \ -e '\<ioread16_rep\>' --or \ -e '\<ioread32_rep\>' --or \ -e '\<ioread64_rep\>' --or \ -e '\<iowrite8_rep\>' --or \ -e '\<iowrite16_rep\>' --or \ -e '\<iowrite32_rep\>' --or \ -e '\<iowrite64_rep\>' --or \ -e '\<__io_virt\>' --or \ -e '\<pci_iounmap\>' --or \ -e '\<virt_to_phys\>' --or \ -e '\<phys_to_virt\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap\>' --or \ -e '\<__ioremap\>' --or \ -e '\<iounmap\>' --or \ -e '\<ioremap\>' --or \ -e '\<ioremap_nocache\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wt\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<xlate_dev_kmem_ptr\>' --or \ -e '\<xlate_dev_mem_ptr\>' --or \ -e '\<unxlate_dev_mem_ptr\>' --or \ -e '\<virt_to_bus\>' --or \ -e '\<bus_to_virt\>' --or \ -e '\<memset_io\>' --or \ -e '\<memcpy_fromio\>' --or \ -e '\<memcpy_toio\>' I also reordered a couple includes when they weren't alphabetical and removed clk.h from kona, replacing it with clk-provider.h because that driver doesn't use clk consumer APIs. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Tero Kristo <t-kristo@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Cc: Chris Zankel <chris@zankel.net> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: John Crispin <john@phrozen.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-18 16:20:22 -06:00
#include <linux/io.h>
arm: add basic support for Rockchip RK3066a boards This adds a generic devicetree board file and a dtsi for boards based on the RK3066a SoCs from Rockchip. Apart from the generic parts (gic, clocks, pinctrl) the only components currently supported are the timers, uarts and mmc ports (all DesignWare- based). Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Olof Johansson <olof@lixom.net>
2013-06-02 15:09:41 -06:00
#include <linux/of_platform.h>
#include <linux/irqchip.h>
ARM: rockchip: disable jtag/sdmmc autoswitching on rk3288 rk3288 SoCs have a function to automatically switch between jtag/sdmmc pinmux settings depending on the card state. This collides with a lot of assumptions. It only works when using the internal card-detect mechanism and breaks horribly when using either the normal card-detect via the slot-gpio function or via any other pin. Also there is of course no link between the mmc and jtag on the software-side, so the jtag clocks may very well be disabled when the card is ejected and the soc switches back to the jtag pinmux. Leaving the switching function enabled did result in mmc timeouts and rcu stalls thus hanging the system on 3.19-rc1. Therefore disable it in all cases, as we expect the devicetree to explicitly select either mmc or jtag pinmuxes anyway. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-11 15:09:23 -07:00
#include <linux/clk-provider.h>
#include <linux/clocksource.h>
#include <linux/mfd/syscon.h>
#include <linux/regmap.h>
arm: add basic support for Rockchip RK3066a boards This adds a generic devicetree board file and a dtsi for boards based on the RK3066a SoCs from Rockchip. Apart from the generic parts (gic, clocks, pinctrl) the only components currently supported are the timers, uarts and mmc ports (all DesignWare- based). Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Olof Johansson <olof@lixom.net>
2013-06-02 15:09:41 -06:00
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/hardware/cache-l2x0.h>
ARM: rockchip: add smp bringup code This adds the necessary smp-operations and startup code to use additional cores on Rockchip SoCs. We currently hog the power management unit in the smp code, as it is necessary to control the power to the cpu core and nothing else is currently using it, so a generic implementation can be done later. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Ulrich Prinz <ulrich.prinz@googlemail.com>
2013-06-17 14:29:23 -06:00
#include "core.h"
ARM: rockchip: add suspend and resume for RK3288 It's a basic version of suspend and resume for rockchip, it only support RK3288 now. Signed-off-by: Tony Xie <xxx@rock-chips.com> Signed-off-by: Chris Zhong <zyw@rock-chips.com> Tested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-12-01 01:52:17 -07:00
#include "pm.h"
arm: add basic support for Rockchip RK3066a boards This adds a generic devicetree board file and a dtsi for boards based on the RK3066a SoCs from Rockchip. Apart from the generic parts (gic, clocks, pinctrl) the only components currently supported are the timers, uarts and mmc ports (all DesignWare- based). Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Olof Johansson <olof@lixom.net>
2013-06-02 15:09:41 -06:00
rockchip: make sure timer7 is enabled on rk3288 platforms timer7 supplies the architected timer and thus as has to run when the system clocksource and clockevents drivers are registered. While it should be the responsibility of the bootloader to do this, and there exists a fix in a community u-boot, all u-boot based systems that actually shipped have the mentioned issue. Therefore to not require every developer to update their u-boot, add a snippet for this, enabling the timer early in the kernel. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-01-20 15:47:30 -07:00
#define RK3288_TIMER6_7_PHYS 0xff810000
ARM: rockchip: disable jtag/sdmmc autoswitching on rk3288 rk3288 SoCs have a function to automatically switch between jtag/sdmmc pinmux settings depending on the card state. This collides with a lot of assumptions. It only works when using the internal card-detect mechanism and breaks horribly when using either the normal card-detect via the slot-gpio function or via any other pin. Also there is of course no link between the mmc and jtag on the software-side, so the jtag clocks may very well be disabled when the card is ejected and the soc switches back to the jtag pinmux. Leaving the switching function enabled did result in mmc timeouts and rcu stalls thus hanging the system on 3.19-rc1. Therefore disable it in all cases, as we expect the devicetree to explicitly select either mmc or jtag pinmuxes anyway. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-11 15:09:23 -07:00
static void __init rockchip_timer_init(void)
{
if (of_machine_is_compatible("rockchip,rk3288")) {
rockchip: make sure timer7 is enabled on rk3288 platforms timer7 supplies the architected timer and thus as has to run when the system clocksource and clockevents drivers are registered. While it should be the responsibility of the bootloader to do this, and there exists a fix in a community u-boot, all u-boot based systems that actually shipped have the mentioned issue. Therefore to not require every developer to update their u-boot, add a snippet for this, enabling the timer early in the kernel. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-01-20 15:47:30 -07:00
void __iomem *reg_base;
/*
* Most/all uboot versions for rk3288 don't enable timer7
* which is needed for the architected timer to work.
* So make sure it is running during early boot.
*/
reg_base = ioremap(RK3288_TIMER6_7_PHYS, SZ_16K);
if (reg_base) {
writel(0, reg_base + 0x30);
writel(0xffffffff, reg_base + 0x20);
writel(0xffffffff, reg_base + 0x24);
writel(1, reg_base + 0x30);
dsb();
iounmap(reg_base);
} else {
pr_err("rockchip: could not map timer7 registers\n");
}
ARM: rockchip: disable jtag/sdmmc autoswitching on rk3288 rk3288 SoCs have a function to automatically switch between jtag/sdmmc pinmux settings depending on the card state. This collides with a lot of assumptions. It only works when using the internal card-detect mechanism and breaks horribly when using either the normal card-detect via the slot-gpio function or via any other pin. Also there is of course no link between the mmc and jtag on the software-side, so the jtag clocks may very well be disabled when the card is ejected and the soc switches back to the jtag pinmux. Leaving the switching function enabled did result in mmc timeouts and rcu stalls thus hanging the system on 3.19-rc1. Therefore disable it in all cases, as we expect the devicetree to explicitly select either mmc or jtag pinmuxes anyway. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-11 15:09:23 -07:00
}
of_clk_init(NULL);
clocksource/drivers: Rename clocksource_probe to timer_probe The function name is now renamed to 'timer_probe' for consistency with the CLOCKSOURCE_OF_DECLARE => TIMER_OF_DECLARE change. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-26 09:40:46 -06:00
timer_probe();
ARM: rockchip: disable jtag/sdmmc autoswitching on rk3288 rk3288 SoCs have a function to automatically switch between jtag/sdmmc pinmux settings depending on the card state. This collides with a lot of assumptions. It only works when using the internal card-detect mechanism and breaks horribly when using either the normal card-detect via the slot-gpio function or via any other pin. Also there is of course no link between the mmc and jtag on the software-side, so the jtag clocks may very well be disabled when the card is ejected and the soc switches back to the jtag pinmux. Leaving the switching function enabled did result in mmc timeouts and rcu stalls thus hanging the system on 3.19-rc1. Therefore disable it in all cases, as we expect the devicetree to explicitly select either mmc or jtag pinmuxes anyway. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-11 15:09:23 -07:00
}
ARM: rockchip: add a cpufreq-cpu0 device Rockchip SoCs can sucessfully use the generic cpufreq-cpu0 driver to do frequency scaling. Therefore add a platform device in the machine init code. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-09-12 16:34:31 -06:00
static void __init rockchip_dt_init(void)
{
ARM: rockchip: add suspend and resume for RK3288 It's a basic version of suspend and resume for rockchip, it only support RK3288 now. Signed-off-by: Tony Xie <xxx@rock-chips.com> Signed-off-by: Chris Zhong <zyw@rock-chips.com> Tested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-12-01 01:52:17 -07:00
rockchip_suspend_init();
ARM: rockchip: add a cpufreq-cpu0 device Rockchip SoCs can sucessfully use the generic cpufreq-cpu0 driver to do frequency scaling. Therefore add a platform device in the machine init code. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-09-12 16:34:31 -06:00
}
arm: add basic support for Rockchip RK3066a boards This adds a generic devicetree board file and a dtsi for boards based on the RK3066a SoCs from Rockchip. Apart from the generic parts (gic, clocks, pinctrl) the only components currently supported are the timers, uarts and mmc ports (all DesignWare- based). Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Olof Johansson <olof@lixom.net>
2013-06-02 15:09:41 -06:00
static const char * const rockchip_board_dt_compat[] = {
"rockchip,rk2928",
"rockchip,rk3066a",
"rockchip,rk3066b",
"rockchip,rk3188",
ARM: rockchip: enable support for RK3228 SoCs Add a rockchip,rk3228 compatible. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-12-09 02:04:11 -07:00
"rockchip,rk3228",
ARM: rockchip: enable support for RK3288 SoCs Enable HAVE_ARM_ARCH_TIMER and add a rockchip,rk3288 compatible. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-06-28 12:13:42 -06:00
"rockchip,rk3288",
ARM: rockchip: enable support for RV1108 SoC Add a rockchip,rv1108 compatible. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> [rk1108->rv1108 rename] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-11-14 05:15:47 -07:00
"rockchip,rv1108",
arm: add basic support for Rockchip RK3066a boards This adds a generic devicetree board file and a dtsi for boards based on the RK3066a SoCs from Rockchip. Apart from the generic parts (gic, clocks, pinctrl) the only components currently supported are the timers, uarts and mmc ports (all DesignWare- based). Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Olof Johansson <olof@lixom.net>
2013-06-02 15:09:41 -06:00
NULL,
};
ARM: rockchip: remove cpu-core name from machine name The Rockchip support is not limited to Cortex-A9 socs anymore and its presence may confuse people reading /proc/cpuinfo. So remove the core specific part. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org>
2015-01-21 02:41:56 -07:00
DT_MACHINE_START(ROCKCHIP_DT, "Rockchip (Device Tree)")
ARM: l2c: rockchip: convert to generic l2c OF initialisation Remove the explicit call to l2x0_of_init(), converting to the generic infrastructure instead. This also allows us to eliminate the .init_machine function as this becomes the same as the generic version. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-28 08:27:59 -06:00
.l2c_aux_val = 0,
.l2c_aux_mask = ~0,
ARM: rockchip: disable jtag/sdmmc autoswitching on rk3288 rk3288 SoCs have a function to automatically switch between jtag/sdmmc pinmux settings depending on the card state. This collides with a lot of assumptions. It only works when using the internal card-detect mechanism and breaks horribly when using either the normal card-detect via the slot-gpio function or via any other pin. Also there is of course no link between the mmc and jtag on the software-side, so the jtag clocks may very well be disabled when the card is ejected and the soc switches back to the jtag pinmux. Leaving the switching function enabled did result in mmc timeouts and rcu stalls thus hanging the system on 3.19-rc1. Therefore disable it in all cases, as we expect the devicetree to explicitly select either mmc or jtag pinmuxes anyway. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-11 15:09:23 -07:00
.init_time = rockchip_timer_init,
arm: add basic support for Rockchip RK3066a boards This adds a generic devicetree board file and a dtsi for boards based on the RK3066a SoCs from Rockchip. Apart from the generic parts (gic, clocks, pinctrl) the only components currently supported are the timers, uarts and mmc ports (all DesignWare- based). Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Olof Johansson <olof@lixom.net>
2013-06-02 15:09:41 -06:00
.dt_compat = rockchip_board_dt_compat,
ARM: rockchip: add a cpufreq-cpu0 device Rockchip SoCs can sucessfully use the generic cpufreq-cpu0 driver to do frequency scaling. Therefore add a platform device in the machine init code. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-09-12 16:34:31 -06:00
.init_machine = rockchip_dt_init,
arm: add basic support for Rockchip RK3066a boards This adds a generic devicetree board file and a dtsi for boards based on the RK3066a SoCs from Rockchip. Apart from the generic parts (gic, clocks, pinctrl) the only components currently supported are the timers, uarts and mmc ports (all DesignWare- based). Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Olof Johansson <olof@lixom.net>
2013-06-02 15:09:41 -06:00
MACHINE_END