alistair23-linux/drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

1963 lines
48 KiB
C
Raw Normal View History

/*
* Copyright 2014 Advanced Micro Devices, Inc.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include <linux/device.h>
#include <linux/export.h>
#include <linux/err.h>
#include <linux/fs.h>
#include <linux/file.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/uaccess.h>
#include <linux/compat.h>
#include <uapi/linux/kfd_ioctl.h>
#include <linux/time.h>
#include <linux/mm.h>
#include <linux/mman.h>
#include <linux/dma-buf.h>
#include <asm/processor.h>
#include "kfd_priv.h"
#include "kfd_device_queue_manager.h"
#include "kfd_dbgmgr.h"
#include "amdgpu_amdkfd.h"
static long kfd_ioctl(struct file *, unsigned int, unsigned long);
static int kfd_open(struct inode *, struct file *);
amdkfd: Add basic modules to amdkfd This patch adds the process module and three helper modules: - kfd_process, which handles process which open /dev/kfd - kfd_doorbell, which provides helper functions for doorbell allocation, release and mapping to userspace - kfd_pasid, which provides helper functions for pasid allocation and release - kfd_aperture, which provides helper functions for managing the LDS, Local GPU memory and Scratch memory apertures of the process This patch only contains the basic kfd_process module, which doesn't contain the reference to the queue scheduler. This was done to allow easier code review. Also, this patch doesn't contain the calls to the IOMMU driver for binding the pasid to the device. Again, this was done to allow easier code review The kfd_process object is created when a process opens /dev/kfd and is closed when the mm_struct of that process is teared-down. v3: Removed kfd_vidmem.c file Replaced direct mmput call to mmu_notifier release Removed typedefs Moved bool field to end of the structure Added new kernel params for gart usage limitation Added initialization of sa manager Fixed debug messages Remove support for LDS in 32 bit Changed code to support mmap of doorbell pages from userspace Added documentation for apertures v4: Replaced RCU by SRCU for kfd_process list management v5: Move amdkfd from drm/radeon/ to drm/amd/ Rename kfd_aperture.c to kfd_flat_memory.c Protect against multiple init calls MQD size is H/W dependent so moved it to device info structure Rename kfd_mem_obj structure's members Use delayed function for process tear-down Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
2014-07-16 14:25:31 -06:00
static int kfd_mmap(struct file *, struct vm_area_struct *);
static const char kfd_dev_name[] = "kfd";
static const struct file_operations kfd_fops = {
.owner = THIS_MODULE,
.unlocked_ioctl = kfd_ioctl,
.compat_ioctl = kfd_ioctl,
.open = kfd_open,
amdkfd: Add basic modules to amdkfd This patch adds the process module and three helper modules: - kfd_process, which handles process which open /dev/kfd - kfd_doorbell, which provides helper functions for doorbell allocation, release and mapping to userspace - kfd_pasid, which provides helper functions for pasid allocation and release - kfd_aperture, which provides helper functions for managing the LDS, Local GPU memory and Scratch memory apertures of the process This patch only contains the basic kfd_process module, which doesn't contain the reference to the queue scheduler. This was done to allow easier code review. Also, this patch doesn't contain the calls to the IOMMU driver for binding the pasid to the device. Again, this was done to allow easier code review The kfd_process object is created when a process opens /dev/kfd and is closed when the mm_struct of that process is teared-down. v3: Removed kfd_vidmem.c file Replaced direct mmput call to mmu_notifier release Removed typedefs Moved bool field to end of the structure Added new kernel params for gart usage limitation Added initialization of sa manager Fixed debug messages Remove support for LDS in 32 bit Changed code to support mmap of doorbell pages from userspace Added documentation for apertures v4: Replaced RCU by SRCU for kfd_process list management v5: Move amdkfd from drm/radeon/ to drm/amd/ Rename kfd_aperture.c to kfd_flat_memory.c Protect against multiple init calls MQD size is H/W dependent so moved it to device info structure Rename kfd_mem_obj structure's members Use delayed function for process tear-down Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
2014-07-16 14:25:31 -06:00
.mmap = kfd_mmap,
};
static int kfd_char_dev_major = -1;
static struct class *kfd_class;
struct device *kfd_device;
int kfd_chardev_init(void)
{
int err = 0;
kfd_char_dev_major = register_chrdev(0, kfd_dev_name, &kfd_fops);
err = kfd_char_dev_major;
if (err < 0)
goto err_register_chrdev;
kfd_class = class_create(THIS_MODULE, kfd_dev_name);
err = PTR_ERR(kfd_class);
if (IS_ERR(kfd_class))
goto err_class_create;
kfd_device = device_create(kfd_class, NULL,
MKDEV(kfd_char_dev_major, 0),
NULL, kfd_dev_name);
err = PTR_ERR(kfd_device);
if (IS_ERR(kfd_device))
goto err_device_create;
return 0;
err_device_create:
class_destroy(kfd_class);
err_class_create:
unregister_chrdev(kfd_char_dev_major, kfd_dev_name);
err_register_chrdev:
return err;
}
void kfd_chardev_exit(void)
{
device_destroy(kfd_class, MKDEV(kfd_char_dev_major, 0));
class_destroy(kfd_class);
unregister_chrdev(kfd_char_dev_major, kfd_dev_name);
}
struct device *kfd_chardev(void)
{
return kfd_device;
}
static int kfd_open(struct inode *inode, struct file *filep)
{
amdkfd: Add basic modules to amdkfd This patch adds the process module and three helper modules: - kfd_process, which handles process which open /dev/kfd - kfd_doorbell, which provides helper functions for doorbell allocation, release and mapping to userspace - kfd_pasid, which provides helper functions for pasid allocation and release - kfd_aperture, which provides helper functions for managing the LDS, Local GPU memory and Scratch memory apertures of the process This patch only contains the basic kfd_process module, which doesn't contain the reference to the queue scheduler. This was done to allow easier code review. Also, this patch doesn't contain the calls to the IOMMU driver for binding the pasid to the device. Again, this was done to allow easier code review The kfd_process object is created when a process opens /dev/kfd and is closed when the mm_struct of that process is teared-down. v3: Removed kfd_vidmem.c file Replaced direct mmput call to mmu_notifier release Removed typedefs Moved bool field to end of the structure Added new kernel params for gart usage limitation Added initialization of sa manager Fixed debug messages Remove support for LDS in 32 bit Changed code to support mmap of doorbell pages from userspace Added documentation for apertures v4: Replaced RCU by SRCU for kfd_process list management v5: Move amdkfd from drm/radeon/ to drm/amd/ Rename kfd_aperture.c to kfd_flat_memory.c Protect against multiple init calls MQD size is H/W dependent so moved it to device info structure Rename kfd_mem_obj structure's members Use delayed function for process tear-down Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
2014-07-16 14:25:31 -06:00
struct kfd_process *process;
bool is_32bit_user_mode;
amdkfd: Add basic modules to amdkfd This patch adds the process module and three helper modules: - kfd_process, which handles process which open /dev/kfd - kfd_doorbell, which provides helper functions for doorbell allocation, release and mapping to userspace - kfd_pasid, which provides helper functions for pasid allocation and release - kfd_aperture, which provides helper functions for managing the LDS, Local GPU memory and Scratch memory apertures of the process This patch only contains the basic kfd_process module, which doesn't contain the reference to the queue scheduler. This was done to allow easier code review. Also, this patch doesn't contain the calls to the IOMMU driver for binding the pasid to the device. Again, this was done to allow easier code review The kfd_process object is created when a process opens /dev/kfd and is closed when the mm_struct of that process is teared-down. v3: Removed kfd_vidmem.c file Replaced direct mmput call to mmu_notifier release Removed typedefs Moved bool field to end of the structure Added new kernel params for gart usage limitation Added initialization of sa manager Fixed debug messages Remove support for LDS in 32 bit Changed code to support mmap of doorbell pages from userspace Added documentation for apertures v4: Replaced RCU by SRCU for kfd_process list management v5: Move amdkfd from drm/radeon/ to drm/amd/ Rename kfd_aperture.c to kfd_flat_memory.c Protect against multiple init calls MQD size is H/W dependent so moved it to device info structure Rename kfd_mem_obj structure's members Use delayed function for process tear-down Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
2014-07-16 14:25:31 -06:00
if (iminor(inode) != 0)
return -ENODEV;
is_32bit_user_mode = in_compat_syscall();
if (is_32bit_user_mode) {
dev_warn(kfd_device,
"Process %d (32-bit) failed to open /dev/kfd\n"
"32-bit processes are not supported by amdkfd\n",
current->pid);
return -EPERM;
}
process = kfd_create_process(filep);
amdkfd: Add basic modules to amdkfd This patch adds the process module and three helper modules: - kfd_process, which handles process which open /dev/kfd - kfd_doorbell, which provides helper functions for doorbell allocation, release and mapping to userspace - kfd_pasid, which provides helper functions for pasid allocation and release - kfd_aperture, which provides helper functions for managing the LDS, Local GPU memory and Scratch memory apertures of the process This patch only contains the basic kfd_process module, which doesn't contain the reference to the queue scheduler. This was done to allow easier code review. Also, this patch doesn't contain the calls to the IOMMU driver for binding the pasid to the device. Again, this was done to allow easier code review The kfd_process object is created when a process opens /dev/kfd and is closed when the mm_struct of that process is teared-down. v3: Removed kfd_vidmem.c file Replaced direct mmput call to mmu_notifier release Removed typedefs Moved bool field to end of the structure Added new kernel params for gart usage limitation Added initialization of sa manager Fixed debug messages Remove support for LDS in 32 bit Changed code to support mmap of doorbell pages from userspace Added documentation for apertures v4: Replaced RCU by SRCU for kfd_process list management v5: Move amdkfd from drm/radeon/ to drm/amd/ Rename kfd_aperture.c to kfd_flat_memory.c Protect against multiple init calls MQD size is H/W dependent so moved it to device info structure Rename kfd_mem_obj structure's members Use delayed function for process tear-down Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
2014-07-16 14:25:31 -06:00
if (IS_ERR(process))
return PTR_ERR(process);
if (kfd_is_locked())
return -EAGAIN;
amdkfd: Add basic modules to amdkfd This patch adds the process module and three helper modules: - kfd_process, which handles process which open /dev/kfd - kfd_doorbell, which provides helper functions for doorbell allocation, release and mapping to userspace - kfd_pasid, which provides helper functions for pasid allocation and release - kfd_aperture, which provides helper functions for managing the LDS, Local GPU memory and Scratch memory apertures of the process This patch only contains the basic kfd_process module, which doesn't contain the reference to the queue scheduler. This was done to allow easier code review. Also, this patch doesn't contain the calls to the IOMMU driver for binding the pasid to the device. Again, this was done to allow easier code review The kfd_process object is created when a process opens /dev/kfd and is closed when the mm_struct of that process is teared-down. v3: Removed kfd_vidmem.c file Replaced direct mmput call to mmu_notifier release Removed typedefs Moved bool field to end of the structure Added new kernel params for gart usage limitation Added initialization of sa manager Fixed debug messages Remove support for LDS in 32 bit Changed code to support mmap of doorbell pages from userspace Added documentation for apertures v4: Replaced RCU by SRCU for kfd_process list management v5: Move amdkfd from drm/radeon/ to drm/amd/ Rename kfd_aperture.c to kfd_flat_memory.c Protect against multiple init calls MQD size is H/W dependent so moved it to device info structure Rename kfd_mem_obj structure's members Use delayed function for process tear-down Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
2014-07-16 14:25:31 -06:00
dev_dbg(kfd_device, "process %d opened, compat mode (32 bit) - %d\n",
process->pasid, process->is_32bit_user_mode);
return 0;
}
static int kfd_ioctl_get_version(struct file *filep, struct kfd_process *p,
void *data)
{
struct kfd_ioctl_get_version_args *args = data;
args->major_version = KFD_IOCTL_MAJOR_VERSION;
args->minor_version = KFD_IOCTL_MINOR_VERSION;
return 0;
}
static int set_queue_properties_from_user(struct queue_properties *q_properties,
struct kfd_ioctl_create_queue_args *args)
{
if (args->queue_percentage > KFD_MAX_QUEUE_PERCENTAGE) {
pr_err("Queue percentage must be between 0 to KFD_MAX_QUEUE_PERCENTAGE\n");
return -EINVAL;
}
if (args->queue_priority > KFD_MAX_QUEUE_PRIORITY) {
pr_err("Queue priority must be between 0 to KFD_MAX_QUEUE_PRIORITY\n");
return -EINVAL;
}
if ((args->ring_base_address) &&
Remove 'type' argument from access_ok() function Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-03 19:57:57 -07:00
(!access_ok((const void __user *) args->ring_base_address,
sizeof(uint64_t)))) {
pr_err("Can't access ring base address\n");
return -EFAULT;
}
if (!is_power_of_2(args->ring_size) && (args->ring_size != 0)) {
pr_err("Ring size must be a power of 2 or 0\n");
return -EINVAL;
}
Remove 'type' argument from access_ok() function Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-03 19:57:57 -07:00
if (!access_ok((const void __user *) args->read_pointer_address,
sizeof(uint32_t))) {
pr_err("Can't access read pointer\n");
return -EFAULT;
}
Remove 'type' argument from access_ok() function Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-03 19:57:57 -07:00
if (!access_ok((const void __user *) args->write_pointer_address,
sizeof(uint32_t))) {
pr_err("Can't access write pointer\n");
return -EFAULT;
}
if (args->eop_buffer_address &&
Remove 'type' argument from access_ok() function Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-03 19:57:57 -07:00
!access_ok((const void __user *) args->eop_buffer_address,
sizeof(uint32_t))) {
pr_debug("Can't access eop buffer");
return -EFAULT;
}
if (args->ctx_save_restore_address &&
Remove 'type' argument from access_ok() function Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-03 19:57:57 -07:00
!access_ok((const void __user *) args->ctx_save_restore_address,
sizeof(uint32_t))) {
pr_debug("Can't access ctx save restore buffer");
return -EFAULT;
}
q_properties->is_interop = false;
q_properties->queue_percent = args->queue_percentage;
q_properties->priority = args->queue_priority;
q_properties->queue_address = args->ring_base_address;
q_properties->queue_size = args->ring_size;
q_properties->read_ptr = (uint32_t *) args->read_pointer_address;
q_properties->write_ptr = (uint32_t *) args->write_pointer_address;
q_properties->eop_ring_buffer_address = args->eop_buffer_address;
q_properties->eop_ring_buffer_size = args->eop_buffer_size;
q_properties->ctx_save_restore_area_address =
args->ctx_save_restore_address;
q_properties->ctx_save_restore_area_size = args->ctx_save_restore_size;
q_properties->ctl_stack_size = args->ctl_stack_size;
if (args->queue_type == KFD_IOC_QUEUE_TYPE_COMPUTE ||
args->queue_type == KFD_IOC_QUEUE_TYPE_COMPUTE_AQL)
q_properties->type = KFD_QUEUE_TYPE_COMPUTE;
else if (args->queue_type == KFD_IOC_QUEUE_TYPE_SDMA)
q_properties->type = KFD_QUEUE_TYPE_SDMA;
else if (args->queue_type == KFD_IOC_QUEUE_TYPE_SDMA_XGMI)
q_properties->type = KFD_QUEUE_TYPE_SDMA_XGMI;
else
return -ENOTSUPP;
if (args->queue_type == KFD_IOC_QUEUE_TYPE_COMPUTE_AQL)
q_properties->format = KFD_QUEUE_FORMAT_AQL;
else
q_properties->format = KFD_QUEUE_FORMAT_PM4;
pr_debug("Queue Percentage: %d, %d\n",
q_properties->queue_percent, args->queue_percentage);
pr_debug("Queue Priority: %d, %d\n",
q_properties->priority, args->queue_priority);
pr_debug("Queue Address: 0x%llX, 0x%llX\n",
q_properties->queue_address, args->ring_base_address);
pr_debug("Queue Size: 0x%llX, %u\n",
q_properties->queue_size, args->ring_size);
pr_debug("Queue r/w Pointers: %px, %px\n",
q_properties->read_ptr,
q_properties->write_ptr);
pr_debug("Queue Format: %d\n", q_properties->format);
pr_debug("Queue EOP: 0x%llX\n", q_properties->eop_ring_buffer_address);
pr_debug("Queue CTX save area: 0x%llX\n",
q_properties->ctx_save_restore_area_address);
return 0;
}
static int kfd_ioctl_create_queue(struct file *filep, struct kfd_process *p,
void *data)
{
struct kfd_ioctl_create_queue_args *args = data;
struct kfd_dev *dev;
int err = 0;
unsigned int queue_id;
struct kfd_process_device *pdd;
struct queue_properties q_properties;
memset(&q_properties, 0, sizeof(struct queue_properties));
pr_debug("Creating queue ioctl\n");
err = set_queue_properties_from_user(&q_properties, args);
if (err)
return err;
pr_debug("Looking for gpu id 0x%x\n", args->gpu_id);
dev = kfd_device_by_id(args->gpu_id);
if (!dev) {
pr_debug("Could not find gpu id 0x%x\n", args->gpu_id);
return -EINVAL;
}
mutex_lock(&p->mutex);
pdd = kfd_bind_process_to_device(dev, p);
if (IS_ERR(pdd)) {
err = -ESRCH;
goto err_bind_process;
}
pr_debug("Creating queue for PASID %d on gpu 0x%x\n",
p->pasid,
dev->id);
err = pqm_create_queue(&p->pqm, dev, filep, &q_properties, &queue_id);
if (err != 0)
goto err_create_queue;
args->queue_id = queue_id;
/* Return gpu_id as doorbell offset for mmap usage */
args->doorbell_offset = KFD_MMAP_TYPE_DOORBELL;
args->doorbell_offset |= KFD_MMAP_GPU_ID(args->gpu_id);
args->doorbell_offset <<= PAGE_SHIFT;
if (KFD_IS_SOC15(dev->device_info->asic_family))
/* On SOC15 ASICs, doorbell allocation must be
* per-device, and independent from the per-process
* queue_id. Return the doorbell offset within the
* doorbell aperture to user mode.
*/
args->doorbell_offset |= q_properties.doorbell_off;
mutex_unlock(&p->mutex);
pr_debug("Queue id %d was created successfully\n", args->queue_id);
pr_debug("Ring buffer address == 0x%016llX\n",
args->ring_base_address);
pr_debug("Read ptr address == 0x%016llX\n",
args->read_pointer_address);
pr_debug("Write ptr address == 0x%016llX\n",
args->write_pointer_address);
return 0;
err_create_queue:
err_bind_process:
mutex_unlock(&p->mutex);
return err;
}
static int kfd_ioctl_destroy_queue(struct file *filp, struct kfd_process *p,
void *data)
{
int retval;
struct kfd_ioctl_destroy_queue_args *args = data;
pr_debug("Destroying queue id %d for pasid %d\n",
args->queue_id,
p->pasid);
mutex_lock(&p->mutex);
retval = pqm_destroy_queue(&p->pqm, args->queue_id);
mutex_unlock(&p->mutex);
return retval;
}
static int kfd_ioctl_update_queue(struct file *filp, struct kfd_process *p,
void *data)
{
int retval;
struct kfd_ioctl_update_queue_args *args = data;
struct queue_properties properties;
if (args->queue_percentage > KFD_MAX_QUEUE_PERCENTAGE) {
pr_err("Queue percentage must be between 0 to KFD_MAX_QUEUE_PERCENTAGE\n");
return -EINVAL;
}
if (args->queue_priority > KFD_MAX_QUEUE_PRIORITY) {
pr_err("Queue priority must be between 0 to KFD_MAX_QUEUE_PRIORITY\n");
return -EINVAL;
}
if ((args->ring_base_address) &&
Remove 'type' argument from access_ok() function Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-03 19:57:57 -07:00
(!access_ok((const void __user *) args->ring_base_address,
sizeof(uint64_t)))) {
pr_err("Can't access ring base address\n");
return -EFAULT;
}
if (!is_power_of_2(args->ring_size) && (args->ring_size != 0)) {
pr_err("Ring size must be a power of 2 or 0\n");
return -EINVAL;
}
properties.queue_address = args->ring_base_address;
properties.queue_size = args->ring_size;
properties.queue_percent = args->queue_percentage;
properties.priority = args->queue_priority;
pr_debug("Updating queue id %d for pasid %d\n",
args->queue_id, p->pasid);
mutex_lock(&p->mutex);
retval = pqm_update_queue(&p->pqm, args->queue_id, &properties);
mutex_unlock(&p->mutex);
return retval;
}
static int kfd_ioctl_set_cu_mask(struct file *filp, struct kfd_process *p,
void *data)
{
int retval;
const int max_num_cus = 1024;
struct kfd_ioctl_set_cu_mask_args *args = data;
struct queue_properties properties;
uint32_t __user *cu_mask_ptr = (uint32_t __user *)args->cu_mask_ptr;
size_t cu_mask_size = sizeof(uint32_t) * (args->num_cu_mask / 32);
if ((args->num_cu_mask % 32) != 0) {
pr_debug("num_cu_mask 0x%x must be a multiple of 32",
args->num_cu_mask);
return -EINVAL;
}
properties.cu_mask_count = args->num_cu_mask;
if (properties.cu_mask_count == 0) {
pr_debug("CU mask cannot be 0");
return -EINVAL;
}
/* To prevent an unreasonably large CU mask size, set an arbitrary
* limit of max_num_cus bits. We can then just drop any CU mask bits
* past max_num_cus bits and just use the first max_num_cus bits.
*/
if (properties.cu_mask_count > max_num_cus) {
pr_debug("CU mask cannot be greater than 1024 bits");
properties.cu_mask_count = max_num_cus;
cu_mask_size = sizeof(uint32_t) * (max_num_cus/32);
}
properties.cu_mask = kzalloc(cu_mask_size, GFP_KERNEL);
if (!properties.cu_mask)
return -ENOMEM;
retval = copy_from_user(properties.cu_mask, cu_mask_ptr, cu_mask_size);
if (retval) {
pr_debug("Could not copy CU mask from userspace");
kfree(properties.cu_mask);
return -EFAULT;
}
mutex_lock(&p->mutex);
retval = pqm_set_cu_mask(&p->pqm, args->queue_id, &properties);
mutex_unlock(&p->mutex);
if (retval)
kfree(properties.cu_mask);
return retval;
}
static int kfd_ioctl_get_queue_wave_state(struct file *filep,
struct kfd_process *p, void *data)
{
struct kfd_ioctl_get_queue_wave_state_args *args = data;
int r;
mutex_lock(&p->mutex);
r = pqm_get_wave_state(&p->pqm, args->queue_id,
(void __user *)args->ctl_stack_address,
&args->ctl_stack_used_size,
&args->save_area_used_size);
mutex_unlock(&p->mutex);
return r;
}
static int kfd_ioctl_set_memory_policy(struct file *filep,
struct kfd_process *p, void *data)
{
struct kfd_ioctl_set_memory_policy_args *args = data;
struct kfd_dev *dev;
int err = 0;
struct kfd_process_device *pdd;
enum cache_policy default_policy, alternate_policy;
if (args->default_policy != KFD_IOC_CACHE_POLICY_COHERENT
&& args->default_policy != KFD_IOC_CACHE_POLICY_NONCOHERENT) {
return -EINVAL;
}
if (args->alternate_policy != KFD_IOC_CACHE_POLICY_COHERENT
&& args->alternate_policy != KFD_IOC_CACHE_POLICY_NONCOHERENT) {
return -EINVAL;
}
dev = kfd_device_by_id(args->gpu_id);
if (!dev)
return -EINVAL;
mutex_lock(&p->mutex);
pdd = kfd_bind_process_to_device(dev, p);
if (IS_ERR(pdd)) {
err = -ESRCH;
goto out;
}
default_policy = (args->default_policy == KFD_IOC_CACHE_POLICY_COHERENT)
? cache_policy_coherent : cache_policy_noncoherent;
alternate_policy =
(args->alternate_policy == KFD_IOC_CACHE_POLICY_COHERENT)
? cache_policy_coherent : cache_policy_noncoherent;
if (!dev->dqm->ops.set_cache_memory_policy(dev->dqm,
&pdd->qpd,
default_policy,
alternate_policy,
(void __user *)args->alternate_aperture_base,
args->alternate_aperture_size))
err = -EINVAL;
out:
mutex_unlock(&p->mutex);
return err;
}
static int kfd_ioctl_set_trap_handler(struct file *filep,
struct kfd_process *p, void *data)
{
struct kfd_ioctl_set_trap_handler_args *args = data;
struct kfd_dev *dev;
int err = 0;
struct kfd_process_device *pdd;
dev = kfd_device_by_id(args->gpu_id);
if (!dev)
return -EINVAL;
mutex_lock(&p->mutex);
pdd = kfd_bind_process_to_device(dev, p);
if (IS_ERR(pdd)) {
err = -ESRCH;
goto out;
}
if (dev->dqm->ops.set_trap_handler(dev->dqm,
&pdd->qpd,
args->tba_addr,
args->tma_addr))
err = -EINVAL;
out:
mutex_unlock(&p->mutex);
return err;
}
drm/amdkfd: add H/W debugger IOCTL set definitions This patch adds four new IOCTLs to amdkfd. These IOCTLs expose a H/W debugger functionality to the userspace. The IOCTLs are: - AMDKFD_IOC_DBG_REGISTER: The purpose of this IOCTL is to notify amdkfd that a process wants to use GPU debugging facilities on itself only. It is expected that this IOCTL would be called before any other H/W debugger requests are sent to amdkfd and for each GPU where the H/W debugging needs to be enabled. The use of this IOCTL ensures that only one instance of a debugger is active in the system. - AMDKFD_IOC_DBG_UNREGISTER: This IOCTL detaches the debugger/debugged process from the H/W Debug which was established by the AMDKFD_IOC_DBG_REGISTER IOCTL. - AMDKFD_IOC_DBG_ADDRESS_WATCH: This IOCTL allows to set different watchpoints with various conditions as indicated by the IOCTL's arguments. The available number of watchpoints is retrieved from topology. This operation is confined to the current debugged process, which was registered through AMDKFD_IOC_DBG_REGISTER. - AMDKFD_IOC_DBG_WAVE_CONTROL: This IOCTL allows to control a wavefront as indicated by the IOCTL's arguments. For example, you can halt/resume or kill either a single wavefront or a set of wavefronts. This operation is confined to the current debugged process, which was registered through AMDKFD_IOC_DBG_REGISTER. Because the arguments for the address watch IOCTL and wave control IOCTL are dynamic, meaning that they could vary in size, the userspace passes a pointer to a structure (in userspace) that contains the value of the arguments. The kernel driver is responsible to parse this structure and validate its contents. v2: change void* to uint64_t inside ioctl arguments Signed-off-by: Yair Shachar <yair.shachar@amd.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2014-12-07 08:05:22 -07:00
static int kfd_ioctl_dbg_register(struct file *filep,
struct kfd_process *p, void *data)
{
struct kfd_ioctl_dbg_register_args *args = data;
struct kfd_dev *dev;
struct kfd_dbgmgr *dbgmgr_ptr;
struct kfd_process_device *pdd;
bool create_ok;
long status = 0;
dev = kfd_device_by_id(args->gpu_id);
if (!dev)
return -EINVAL;
if (dev->device_info->asic_family == CHIP_CARRIZO) {
pr_debug("kfd_ioctl_dbg_register not supported on CZ\n");
return -EINVAL;
}
mutex_lock(&p->mutex);
mutex_lock(kfd_get_dbgmgr_mutex());
/*
* make sure that we have pdd, if this the first queue created for
* this process
*/
pdd = kfd_bind_process_to_device(dev, p);
if (IS_ERR(pdd)) {
status = PTR_ERR(pdd);
goto out;
}
if (!dev->dbgmgr) {
/* In case of a legal call, we have no dbgmgr yet */
create_ok = kfd_dbgmgr_create(&dbgmgr_ptr, dev);
if (create_ok) {
status = kfd_dbgmgr_register(dbgmgr_ptr, p);
if (status != 0)
kfd_dbgmgr_destroy(dbgmgr_ptr);
else
dev->dbgmgr = dbgmgr_ptr;
}
} else {
pr_debug("debugger already registered\n");
status = -EINVAL;
}
out:
mutex_unlock(kfd_get_dbgmgr_mutex());
mutex_unlock(&p->mutex);
drm/amdkfd: add H/W debugger IOCTL set definitions This patch adds four new IOCTLs to amdkfd. These IOCTLs expose a H/W debugger functionality to the userspace. The IOCTLs are: - AMDKFD_IOC_DBG_REGISTER: The purpose of this IOCTL is to notify amdkfd that a process wants to use GPU debugging facilities on itself only. It is expected that this IOCTL would be called before any other H/W debugger requests are sent to amdkfd and for each GPU where the H/W debugging needs to be enabled. The use of this IOCTL ensures that only one instance of a debugger is active in the system. - AMDKFD_IOC_DBG_UNREGISTER: This IOCTL detaches the debugger/debugged process from the H/W Debug which was established by the AMDKFD_IOC_DBG_REGISTER IOCTL. - AMDKFD_IOC_DBG_ADDRESS_WATCH: This IOCTL allows to set different watchpoints with various conditions as indicated by the IOCTL's arguments. The available number of watchpoints is retrieved from topology. This operation is confined to the current debugged process, which was registered through AMDKFD_IOC_DBG_REGISTER. - AMDKFD_IOC_DBG_WAVE_CONTROL: This IOCTL allows to control a wavefront as indicated by the IOCTL's arguments. For example, you can halt/resume or kill either a single wavefront or a set of wavefronts. This operation is confined to the current debugged process, which was registered through AMDKFD_IOC_DBG_REGISTER. Because the arguments for the address watch IOCTL and wave control IOCTL are dynamic, meaning that they could vary in size, the userspace passes a pointer to a structure (in userspace) that contains the value of the arguments. The kernel driver is responsible to parse this structure and validate its contents. v2: change void* to uint64_t inside ioctl arguments Signed-off-by: Yair Shachar <yair.shachar@amd.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2014-12-07 08:05:22 -07:00
return status;
}
static int kfd_ioctl_dbg_unregister(struct file *filep,
drm/amdkfd: add H/W debugger IOCTL set definitions This patch adds four new IOCTLs to amdkfd. These IOCTLs expose a H/W debugger functionality to the userspace. The IOCTLs are: - AMDKFD_IOC_DBG_REGISTER: The purpose of this IOCTL is to notify amdkfd that a process wants to use GPU debugging facilities on itself only. It is expected that this IOCTL would be called before any other H/W debugger requests are sent to amdkfd and for each GPU where the H/W debugging needs to be enabled. The use of this IOCTL ensures that only one instance of a debugger is active in the system. - AMDKFD_IOC_DBG_UNREGISTER: This IOCTL detaches the debugger/debugged process from the H/W Debug which was established by the AMDKFD_IOC_DBG_REGISTER IOCTL. - AMDKFD_IOC_DBG_ADDRESS_WATCH: This IOCTL allows to set different watchpoints with various conditions as indicated by the IOCTL's arguments. The available number of watchpoints is retrieved from topology. This operation is confined to the current debugged process, which was registered through AMDKFD_IOC_DBG_REGISTER. - AMDKFD_IOC_DBG_WAVE_CONTROL: This IOCTL allows to control a wavefront as indicated by the IOCTL's arguments. For example, you can halt/resume or kill either a single wavefront or a set of wavefronts. This operation is confined to the current debugged process, which was registered through AMDKFD_IOC_DBG_REGISTER. Because the arguments for the address watch IOCTL and wave control IOCTL are dynamic, meaning that they could vary in size, the userspace passes a pointer to a structure (in userspace) that contains the value of the arguments. The kernel driver is responsible to parse this structure and validate its contents. v2: change void* to uint64_t inside ioctl arguments Signed-off-by: Yair Shachar <yair.shachar@amd.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2014-12-07 08:05:22 -07:00
struct kfd_process *p, void *data)
{
struct kfd_ioctl_dbg_unregister_args *args = data;
struct kfd_dev *dev;
long status;
dev = kfd_device_by_id(args->gpu_id);
if (!dev || !dev->dbgmgr)
return -EINVAL;
if (dev->device_info->asic_family == CHIP_CARRIZO) {
pr_debug("kfd_ioctl_dbg_unregister not supported on CZ\n");
return -EINVAL;
}
mutex_lock(kfd_get_dbgmgr_mutex());
status = kfd_dbgmgr_unregister(dev->dbgmgr, p);
if (!status) {
kfd_dbgmgr_destroy(dev->dbgmgr);
dev->dbgmgr = NULL;
}
mutex_unlock(kfd_get_dbgmgr_mutex());
drm/amdkfd: add H/W debugger IOCTL set definitions This patch adds four new IOCTLs to amdkfd. These IOCTLs expose a H/W debugger functionality to the userspace. The IOCTLs are: - AMDKFD_IOC_DBG_REGISTER: The purpose of this IOCTL is to notify amdkfd that a process wants to use GPU debugging facilities on itself only. It is expected that this IOCTL would be called before any other H/W debugger requests are sent to amdkfd and for each GPU where the H/W debugging needs to be enabled. The use of this IOCTL ensures that only one instance of a debugger is active in the system. - AMDKFD_IOC_DBG_UNREGISTER: This IOCTL detaches the debugger/debugged process from the H/W Debug which was established by the AMDKFD_IOC_DBG_REGISTER IOCTL. - AMDKFD_IOC_DBG_ADDRESS_WATCH: This IOCTL allows to set different watchpoints with various conditions as indicated by the IOCTL's arguments. The available number of watchpoints is retrieved from topology. This operation is confined to the current debugged process, which was registered through AMDKFD_IOC_DBG_REGISTER. - AMDKFD_IOC_DBG_WAVE_CONTROL: This IOCTL allows to control a wavefront as indicated by the IOCTL's arguments. For example, you can halt/resume or kill either a single wavefront or a set of wavefronts. This operation is confined to the current debugged process, which was registered through AMDKFD_IOC_DBG_REGISTER. Because the arguments for the address watch IOCTL and wave control IOCTL are dynamic, meaning that they could vary in size, the userspace passes a pointer to a structure (in userspace) that contains the value of the arguments. The kernel driver is responsible to parse this structure and validate its contents. v2: change void* to uint64_t inside ioctl arguments Signed-off-by: Yair Shachar <yair.shachar@amd.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2014-12-07 08:05:22 -07:00
return status;
}
/*
* Parse and generate variable size data structure for address watch.
* Total size of the buffer and # watch points is limited in order
* to prevent kernel abuse. (no bearing to the much smaller HW limitation
* which is enforced by dbgdev module)
* please also note that the watch address itself are not "copied from user",
* since it be set into the HW in user mode values.
*
*/
static int kfd_ioctl_dbg_address_watch(struct file *filep,
struct kfd_process *p, void *data)
{
struct kfd_ioctl_dbg_address_watch_args *args = data;
struct kfd_dev *dev;
struct dbg_address_watch_info aw_info;
unsigned char *args_buff;
long status;
void __user *cmd_from_user;
uint64_t watch_mask_value = 0;
unsigned int args_idx = 0;
memset((void *) &aw_info, 0, sizeof(struct dbg_address_watch_info));
dev = kfd_device_by_id(args->gpu_id);
if (!dev)
return -EINVAL;
if (dev->device_info->asic_family == CHIP_CARRIZO) {
pr_debug("kfd_ioctl_dbg_wave_control not supported on CZ\n");
return -EINVAL;
}
cmd_from_user = (void __user *) args->content_ptr;
/* Validate arguments */
if ((args->buf_size_in_bytes > MAX_ALLOWED_AW_BUFF_SIZE) ||
(args->buf_size_in_bytes <= sizeof(*args) + sizeof(int) * 2) ||
(cmd_from_user == NULL))
return -EINVAL;
/* this is the actual buffer to work with */
args_buff = memdup_user(cmd_from_user,
args->buf_size_in_bytes - sizeof(*args));
if (IS_ERR(args_buff))
return PTR_ERR(args_buff);
aw_info.process = p;
aw_info.num_watch_points = *((uint32_t *)(&args_buff[args_idx]));
args_idx += sizeof(aw_info.num_watch_points);
aw_info.watch_mode = (enum HSA_DBG_WATCH_MODE *) &args_buff[args_idx];
args_idx += sizeof(enum HSA_DBG_WATCH_MODE) * aw_info.num_watch_points;
/*
* set watch address base pointer to point on the array base
* within args_buff
*/
aw_info.watch_address = (uint64_t *) &args_buff[args_idx];
/* skip over the addresses buffer */
args_idx += sizeof(aw_info.watch_address) * aw_info.num_watch_points;
if (args_idx >= args->buf_size_in_bytes - sizeof(*args)) {
status = -EINVAL;
goto out;
}
watch_mask_value = (uint64_t) args_buff[args_idx];
if (watch_mask_value > 0) {
/*
* There is an array of masks.
* set watch mask base pointer to point on the array base
* within args_buff
*/
aw_info.watch_mask = (uint64_t *) &args_buff[args_idx];
/* skip over the masks buffer */
args_idx += sizeof(aw_info.watch_mask) *
aw_info.num_watch_points;
} else {
/* just the NULL mask, set to NULL and skip over it */
aw_info.watch_mask = NULL;
args_idx += sizeof(aw_info.watch_mask);
}
if (args_idx >= args->buf_size_in_bytes - sizeof(args)) {
status = -EINVAL;
goto out;
}
/* Currently HSA Event is not supported for DBG */
aw_info.watch_event = NULL;
mutex_lock(kfd_get_dbgmgr_mutex());
status = kfd_dbgmgr_address_watch(dev->dbgmgr, &aw_info);
mutex_unlock(kfd_get_dbgmgr_mutex());
out:
kfree(args_buff);
drm/amdkfd: add H/W debugger IOCTL set definitions This patch adds four new IOCTLs to amdkfd. These IOCTLs expose a H/W debugger functionality to the userspace. The IOCTLs are: - AMDKFD_IOC_DBG_REGISTER: The purpose of this IOCTL is to notify amdkfd that a process wants to use GPU debugging facilities on itself only. It is expected that this IOCTL would be called before any other H/W debugger requests are sent to amdkfd and for each GPU where the H/W debugging needs to be enabled. The use of this IOCTL ensures that only one instance of a debugger is active in the system. - AMDKFD_IOC_DBG_UNREGISTER: This IOCTL detaches the debugger/debugged process from the H/W Debug which was established by the AMDKFD_IOC_DBG_REGISTER IOCTL. - AMDKFD_IOC_DBG_ADDRESS_WATCH: This IOCTL allows to set different watchpoints with various conditions as indicated by the IOCTL's arguments. The available number of watchpoints is retrieved from topology. This operation is confined to the current debugged process, which was registered through AMDKFD_IOC_DBG_REGISTER. - AMDKFD_IOC_DBG_WAVE_CONTROL: This IOCTL allows to control a wavefront as indicated by the IOCTL's arguments. For example, you can halt/resume or kill either a single wavefront or a set of wavefronts. This operation is confined to the current debugged process, which was registered through AMDKFD_IOC_DBG_REGISTER. Because the arguments for the address watch IOCTL and wave control IOCTL are dynamic, meaning that they could vary in size, the userspace passes a pointer to a structure (in userspace) that contains the value of the arguments. The kernel driver is responsible to parse this structure and validate its contents. v2: change void* to uint64_t inside ioctl arguments Signed-off-by: Yair Shachar <yair.shachar@amd.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2014-12-07 08:05:22 -07:00
return status;
}
/* Parse and generate fixed size data structure for wave control */
static int kfd_ioctl_dbg_wave_control(struct file *filep,
struct kfd_process *p, void *data)
{
struct kfd_ioctl_dbg_wave_control_args *args = data;
struct kfd_dev *dev;
struct dbg_wave_control_info wac_info;
unsigned char *args_buff;
uint32_t computed_buff_size;
long status;
void __user *cmd_from_user;
unsigned int args_idx = 0;
memset((void *) &wac_info, 0, sizeof(struct dbg_wave_control_info));
/* we use compact form, independent of the packing attribute value */
computed_buff_size = sizeof(*args) +
sizeof(wac_info.mode) +
sizeof(wac_info.operand) +
sizeof(wac_info.dbgWave_msg.DbgWaveMsg) +
sizeof(wac_info.dbgWave_msg.MemoryVA) +
sizeof(wac_info.trapId);
dev = kfd_device_by_id(args->gpu_id);
if (!dev)
return -EINVAL;
if (dev->device_info->asic_family == CHIP_CARRIZO) {
pr_debug("kfd_ioctl_dbg_wave_control not supported on CZ\n");
return -EINVAL;
}
/* input size must match the computed "compact" size */
if (args->buf_size_in_bytes != computed_buff_size) {
pr_debug("size mismatch, computed : actual %u : %u\n",
args->buf_size_in_bytes, computed_buff_size);
return -EINVAL;
}
cmd_from_user = (void __user *) args->content_ptr;
if (cmd_from_user == NULL)
return -EINVAL;
/* copy the entire buffer from user */
args_buff = memdup_user(cmd_from_user,
args->buf_size_in_bytes - sizeof(*args));
if (IS_ERR(args_buff))
return PTR_ERR(args_buff);
/* move ptr to the start of the "pay-load" area */
wac_info.process = p;
wac_info.operand = *((enum HSA_DBG_WAVEOP *)(&args_buff[args_idx]));
args_idx += sizeof(wac_info.operand);
wac_info.mode = *((enum HSA_DBG_WAVEMODE *)(&args_buff[args_idx]));
args_idx += sizeof(wac_info.mode);
wac_info.trapId = *((uint32_t *)(&args_buff[args_idx]));
args_idx += sizeof(wac_info.trapId);
wac_info.dbgWave_msg.DbgWaveMsg.WaveMsgInfoGen2.Value =
*((uint32_t *)(&args_buff[args_idx]));
wac_info.dbgWave_msg.MemoryVA = NULL;
mutex_lock(kfd_get_dbgmgr_mutex());
pr_debug("Calling dbg manager process %p, operand %u, mode %u, trapId %u, message %u\n",
wac_info.process, wac_info.operand,
wac_info.mode, wac_info.trapId,
wac_info.dbgWave_msg.DbgWaveMsg.WaveMsgInfoGen2.Value);
status = kfd_dbgmgr_wave_control(dev->dbgmgr, &wac_info);
pr_debug("Returned status of dbg manager is %ld\n", status);
mutex_unlock(kfd_get_dbgmgr_mutex());
kfree(args_buff);
drm/amdkfd: add H/W debugger IOCTL set definitions This patch adds four new IOCTLs to amdkfd. These IOCTLs expose a H/W debugger functionality to the userspace. The IOCTLs are: - AMDKFD_IOC_DBG_REGISTER: The purpose of this IOCTL is to notify amdkfd that a process wants to use GPU debugging facilities on itself only. It is expected that this IOCTL would be called before any other H/W debugger requests are sent to amdkfd and for each GPU where the H/W debugging needs to be enabled. The use of this IOCTL ensures that only one instance of a debugger is active in the system. - AMDKFD_IOC_DBG_UNREGISTER: This IOCTL detaches the debugger/debugged process from the H/W Debug which was established by the AMDKFD_IOC_DBG_REGISTER IOCTL. - AMDKFD_IOC_DBG_ADDRESS_WATCH: This IOCTL allows to set different watchpoints with various conditions as indicated by the IOCTL's arguments. The available number of watchpoints is retrieved from topology. This operation is confined to the current debugged process, which was registered through AMDKFD_IOC_DBG_REGISTER. - AMDKFD_IOC_DBG_WAVE_CONTROL: This IOCTL allows to control a wavefront as indicated by the IOCTL's arguments. For example, you can halt/resume or kill either a single wavefront or a set of wavefronts. This operation is confined to the current debugged process, which was registered through AMDKFD_IOC_DBG_REGISTER. Because the arguments for the address watch IOCTL and wave control IOCTL are dynamic, meaning that they could vary in size, the userspace passes a pointer to a structure (in userspace) that contains the value of the arguments. The kernel driver is responsible to parse this structure and validate its contents. v2: change void* to uint64_t inside ioctl arguments Signed-off-by: Yair Shachar <yair.shachar@amd.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2014-12-07 08:05:22 -07:00
return status;
}
static int kfd_ioctl_get_clock_counters(struct file *filep,
struct kfd_process *p, void *data)
{
struct kfd_ioctl_get_clock_counters_args *args = data;
struct kfd_dev *dev;
dev = kfd_device_by_id(args->gpu_id);
if (dev)
/* Reading GPU clock counter from KGD */
args->gpu_clock_counter = amdgpu_amdkfd_get_gpu_clock_counter(dev->kgd);
else
/* Node without GPU resource */
args->gpu_clock_counter = 0;
/* No access to rdtsc. Using raw monotonic time */
args->cpu_clock_counter = ktime_get_raw_ns();
args->system_clock_counter = ktime_get_boot_ns();
/* Since the counter is in nano-seconds we use 1GHz frequency */
args->system_clock_freq = 1000000000;
return 0;
}
static int kfd_ioctl_get_process_apertures(struct file *filp,
struct kfd_process *p, void *data)
{
struct kfd_ioctl_get_process_apertures_args *args = data;
struct kfd_process_device_apertures *pAperture;
struct kfd_process_device *pdd;
dev_dbg(kfd_device, "get apertures for PASID %d", p->pasid);
args->num_of_nodes = 0;
mutex_lock(&p->mutex);
/*if the process-device list isn't empty*/
if (kfd_has_process_device_data(p)) {
/* Run over all pdd of the process */
pdd = kfd_get_first_process_device_data(p);
do {
pAperture =
&args->process_apertures[args->num_of_nodes];
pAperture->gpu_id = pdd->dev->id;
pAperture->lds_base = pdd->lds_base;
pAperture->lds_limit = pdd->lds_limit;
pAperture->gpuvm_base = pdd->gpuvm_base;
pAperture->gpuvm_limit = pdd->gpuvm_limit;
pAperture->scratch_base = pdd->scratch_base;
pAperture->scratch_limit = pdd->scratch_limit;
dev_dbg(kfd_device,
"node id %u\n", args->num_of_nodes);
dev_dbg(kfd_device,
"gpu id %u\n", pdd->dev->id);
dev_dbg(kfd_device,
"lds_base %llX\n", pdd->lds_base);
dev_dbg(kfd_device,
"lds_limit %llX\n", pdd->lds_limit);
dev_dbg(kfd_device,
"gpuvm_base %llX\n", pdd->gpuvm_base);
dev_dbg(kfd_device,
"gpuvm_limit %llX\n", pdd->gpuvm_limit);
dev_dbg(kfd_device,
"scratch_base %llX\n", pdd->scratch_base);
dev_dbg(kfd_device,
"scratch_limit %llX\n", pdd->scratch_limit);
args->num_of_nodes++;
pdd = kfd_get_next_process_device_data(p, pdd);
} while (pdd && (args->num_of_nodes < NUM_OF_SUPPORTED_GPUS));
}
mutex_unlock(&p->mutex);
return 0;
}
static int kfd_ioctl_get_process_apertures_new(struct file *filp,
struct kfd_process *p, void *data)
{
struct kfd_ioctl_get_process_apertures_new_args *args = data;
struct kfd_process_device_apertures *pa;
struct kfd_process_device *pdd;
uint32_t nodes = 0;
int ret;
dev_dbg(kfd_device, "get apertures for PASID %d", p->pasid);
if (args->num_of_nodes == 0) {
/* Return number of nodes, so that user space can alloacate
* sufficient memory
*/
mutex_lock(&p->mutex);
if (!kfd_has_process_device_data(p))
goto out_unlock;
/* Run over all pdd of the process */
pdd = kfd_get_first_process_device_data(p);
do {
args->num_of_nodes++;
pdd = kfd_get_next_process_device_data(p, pdd);
} while (pdd);
goto out_unlock;
}
/* Fill in process-aperture information for all available
* nodes, but not more than args->num_of_nodes as that is
* the amount of memory allocated by user
*/
pa = kzalloc((sizeof(struct kfd_process_device_apertures) *
args->num_of_nodes), GFP_KERNEL);
if (!pa)
return -ENOMEM;
mutex_lock(&p->mutex);
if (!kfd_has_process_device_data(p)) {
args->num_of_nodes = 0;
kfree(pa);
goto out_unlock;
}
/* Run over all pdd of the process */
pdd = kfd_get_first_process_device_data(p);
do {
pa[nodes].gpu_id = pdd->dev->id;
pa[nodes].lds_base = pdd->lds_base;
pa[nodes].lds_limit = pdd->lds_limit;
pa[nodes].gpuvm_base = pdd->gpuvm_base;
pa[nodes].gpuvm_limit = pdd->gpuvm_limit;
pa[nodes].scratch_base = pdd->scratch_base;
pa[nodes].scratch_limit = pdd->scratch_limit;
dev_dbg(kfd_device,
"gpu id %u\n", pdd->dev->id);
dev_dbg(kfd_device,
"lds_base %llX\n", pdd->lds_base);
dev_dbg(kfd_device,
"lds_limit %llX\n", pdd->lds_limit);
dev_dbg(kfd_device,
"gpuvm_base %llX\n", pdd->gpuvm_base);
dev_dbg(kfd_device,
"gpuvm_limit %llX\n", pdd->gpuvm_limit);
dev_dbg(kfd_device,
"scratch_base %llX\n", pdd->scratch_base);
dev_dbg(kfd_device,
"scratch_limit %llX\n", pdd->scratch_limit);
nodes++;
pdd = kfd_get_next_process_device_data(p, pdd);
} while (pdd && (nodes < args->num_of_nodes));
mutex_unlock(&p->mutex);
args->num_of_nodes = nodes;
ret = copy_to_user(
(void __user *)args->kfd_process_device_apertures_ptr,
pa,
(nodes * sizeof(struct kfd_process_device_apertures)));
kfree(pa);
return ret ? -EFAULT : 0;
out_unlock:
mutex_unlock(&p->mutex);
return 0;
}
static int kfd_ioctl_create_event(struct file *filp, struct kfd_process *p,
void *data)
{
struct kfd_ioctl_create_event_args *args = data;
int err;
/* For dGPUs the event page is allocated in user mode. The
* handle is passed to KFD with the first call to this IOCTL
* through the event_page_offset field.
*/
if (args->event_page_offset) {
struct kfd_dev *kfd;
struct kfd_process_device *pdd;
void *mem, *kern_addr;
uint64_t size;
if (p->signal_page) {
pr_err("Event page is already set\n");
return -EINVAL;
}
kfd = kfd_device_by_id(GET_GPU_ID(args->event_page_offset));
if (!kfd) {
pr_err("Getting device by id failed in %s\n", __func__);
return -EINVAL;
}
mutex_lock(&p->mutex);
pdd = kfd_bind_process_to_device(kfd, p);
if (IS_ERR(pdd)) {
err = PTR_ERR(pdd);
goto out_unlock;
}
mem = kfd_process_device_translate_handle(pdd,
GET_IDR_HANDLE(args->event_page_offset));
if (!mem) {
pr_err("Can't find BO, offset is 0x%llx\n",
args->event_page_offset);
err = -EINVAL;
goto out_unlock;
}
mutex_unlock(&p->mutex);
err = amdgpu_amdkfd_gpuvm_map_gtt_bo_to_kernel(kfd->kgd,
mem, &kern_addr, &size);
if (err) {
pr_err("Failed to map event page to kernel\n");
return err;
}
err = kfd_event_page_set(p, kern_addr, size);
if (err) {
pr_err("Failed to set event page\n");
return err;
}
}
err = kfd_event_create(filp, p, args->event_type,
args->auto_reset != 0, args->node_id,
&args->event_id, &args->event_trigger_data,
&args->event_page_offset,
&args->event_slot_index);
return err;
out_unlock:
mutex_unlock(&p->mutex);
return err;
}
static int kfd_ioctl_destroy_event(struct file *filp, struct kfd_process *p,
void *data)
{
struct kfd_ioctl_destroy_event_args *args = data;
return kfd_event_destroy(p, args->event_id);
}
static int kfd_ioctl_set_event(struct file *filp, struct kfd_process *p,
void *data)
{
struct kfd_ioctl_set_event_args *args = data;
return kfd_set_event(p, args->event_id);
}
static int kfd_ioctl_reset_event(struct file *filp, struct kfd_process *p,
void *data)
{
struct kfd_ioctl_reset_event_args *args = data;
return kfd_reset_event(p, args->event_id);
}
static int kfd_ioctl_wait_events(struct file *filp, struct kfd_process *p,
void *data)
{
struct kfd_ioctl_wait_events_args *args = data;
int err;
err = kfd_wait_on_events(p, args->num_events,
(void __user *)args->events_ptr,
(args->wait_for_all != 0),
args->timeout, &args->wait_result);
return err;
}
static int kfd_ioctl_set_scratch_backing_va(struct file *filep,
struct kfd_process *p, void *data)
{
struct kfd_ioctl_set_scratch_backing_va_args *args = data;
struct kfd_process_device *pdd;
struct kfd_dev *dev;
long err;
dev = kfd_device_by_id(args->gpu_id);
if (!dev)
return -EINVAL;
mutex_lock(&p->mutex);
pdd = kfd_bind_process_to_device(dev, p);
if (IS_ERR(pdd)) {
err = PTR_ERR(pdd);
goto bind_process_to_device_fail;
}
pdd->qpd.sh_hidden_private_base = args->va_addr;
mutex_unlock(&p->mutex);
if (dev->dqm->sched_policy == KFD_SCHED_POLICY_NO_HWS &&
pdd->qpd.vmid != 0)
dev->kfd2kgd->set_scratch_backing_va(
dev->kgd, args->va_addr, pdd->qpd.vmid);
return 0;
bind_process_to_device_fail:
mutex_unlock(&p->mutex);
return err;
}
static int kfd_ioctl_get_tile_config(struct file *filep,
struct kfd_process *p, void *data)
{
struct kfd_ioctl_get_tile_config_args *args = data;
struct kfd_dev *dev;
struct tile_config config;
int err = 0;
dev = kfd_device_by_id(args->gpu_id);
if (!dev)
return -EINVAL;
dev->kfd2kgd->get_tile_config(dev->kgd, &config);
args->gb_addr_config = config.gb_addr_config;
args->num_banks = config.num_banks;
args->num_ranks = config.num_ranks;
if (args->num_tile_configs > config.num_tile_configs)
args->num_tile_configs = config.num_tile_configs;
err = copy_to_user((void __user *)args->tile_config_ptr,
config.tile_config_ptr,
args->num_tile_configs * sizeof(uint32_t));
if (err) {
args->num_tile_configs = 0;
return -EFAULT;
}
if (args->num_macro_tile_configs > config.num_macro_tile_configs)
args->num_macro_tile_configs =
config.num_macro_tile_configs;
err = copy_to_user((void __user *)args->macro_tile_config_ptr,
config.macro_tile_config_ptr,
args->num_macro_tile_configs * sizeof(uint32_t));
if (err) {
args->num_macro_tile_configs = 0;
return -EFAULT;
}
return 0;
}
static int kfd_ioctl_acquire_vm(struct file *filep, struct kfd_process *p,
void *data)
{
struct kfd_ioctl_acquire_vm_args *args = data;
struct kfd_process_device *pdd;
struct kfd_dev *dev;
struct file *drm_file;
int ret;
dev = kfd_device_by_id(args->gpu_id);
if (!dev)
return -EINVAL;
drm_file = fget(args->drm_fd);
if (!drm_file)
return -EINVAL;
mutex_lock(&p->mutex);
pdd = kfd_get_process_device_data(dev, p);
if (!pdd) {
ret = -EINVAL;
goto err_unlock;
}
if (pdd->drm_file) {
ret = pdd->drm_file == drm_file ? 0 : -EBUSY;
goto err_unlock;
}
ret = kfd_process_device_init_vm(pdd, drm_file);
if (ret)
goto err_unlock;
/* On success, the PDD keeps the drm_file reference */
mutex_unlock(&p->mutex);
return 0;
err_unlock:
mutex_unlock(&p->mutex);
fput(drm_file);
return ret;
}
bool kfd_dev_is_large_bar(struct kfd_dev *dev)
{
struct kfd_local_mem_info mem_info;
if (debug_largebar) {
pr_debug("Simulate large-bar allocation on non large-bar machine\n");
return true;
}
if (dev->device_info->needs_iommu_device)
return false;
amdgpu_amdkfd_get_local_mem_info(dev->kgd, &mem_info);
if (mem_info.local_mem_size_private == 0 &&
mem_info.local_mem_size_public > 0)
return true;
return false;
}
static int kfd_ioctl_alloc_memory_of_gpu(struct file *filep,
struct kfd_process *p, void *data)
{
struct kfd_ioctl_alloc_memory_of_gpu_args *args = data;
struct kfd_process_device *pdd;
void *mem;
struct kfd_dev *dev;
int idr_handle;
long err;
uint64_t offset = args->mmap_offset;
uint32_t flags = args->flags;
if (args->size == 0)
return -EINVAL;
dev = kfd_device_by_id(args->gpu_id);
if (!dev)
return -EINVAL;
if ((flags & KFD_IOC_ALLOC_MEM_FLAGS_PUBLIC) &&
(flags & KFD_IOC_ALLOC_MEM_FLAGS_VRAM) &&
!kfd_dev_is_large_bar(dev)) {
pr_err("Alloc host visible vram on small bar is not allowed\n");
return -EINVAL;
}
if (flags & KFD_IOC_ALLOC_MEM_FLAGS_DOORBELL) {
if (args->size != kfd_doorbell_process_slice(dev))
return -EINVAL;
offset = kfd_get_process_doorbells(dev, p);
} else if (flags & KFD_IOC_ALLOC_MEM_FLAGS_MMIO_REMAP) {
if (args->size != PAGE_SIZE)
return -EINVAL;
offset = amdgpu_amdkfd_get_mmio_remap_phys_addr(dev->kgd);
if (!offset)
return -ENOMEM;
}
mutex_lock(&p->mutex);
pdd = kfd_bind_process_to_device(dev, p);
if (IS_ERR(pdd)) {
err = PTR_ERR(pdd);
goto err_unlock;
}
err = amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu(
dev->kgd, args->va_addr, args->size,
pdd->vm, (struct kgd_mem **) &mem, &offset,
flags);
if (err)
goto err_unlock;
idr_handle = kfd_process_device_create_obj_handle(pdd, mem);
if (idr_handle < 0) {
err = -EFAULT;
goto err_free;
}
mutex_unlock(&p->mutex);
args->handle = MAKE_HANDLE(args->gpu_id, idr_handle);
args->mmap_offset = offset;
/* MMIO is mapped through kfd device
* Generate a kfd mmap offset
*/
if (flags & KFD_IOC_ALLOC_MEM_FLAGS_MMIO_REMAP) {
args->mmap_offset = KFD_MMAP_TYPE_MMIO | KFD_MMAP_GPU_ID(args->gpu_id);
args->mmap_offset <<= PAGE_SHIFT;
}
return 0;
err_free:
amdgpu_amdkfd_gpuvm_free_memory_of_gpu(dev->kgd, (struct kgd_mem *)mem);
err_unlock:
mutex_unlock(&p->mutex);
return err;
}
static int kfd_ioctl_free_memory_of_gpu(struct file *filep,
struct kfd_process *p, void *data)
{
struct kfd_ioctl_free_memory_of_gpu_args *args = data;
struct kfd_process_device *pdd;
void *mem;
struct kfd_dev *dev;
int ret;
dev = kfd_device_by_id(GET_GPU_ID(args->handle));
if (!dev)
return -EINVAL;
mutex_lock(&p->mutex);
pdd = kfd_get_process_device_data(dev, p);
if (!pdd) {
pr_err("Process device data doesn't exist\n");
ret = -EINVAL;
goto err_unlock;
}
mem = kfd_process_device_translate_handle(
pdd, GET_IDR_HANDLE(args->handle));
if (!mem) {
ret = -EINVAL;
goto err_unlock;
}
ret = amdgpu_amdkfd_gpuvm_free_memory_of_gpu(dev->kgd,
(struct kgd_mem *)mem);
/* If freeing the buffer failed, leave the handle in place for
* clean-up during process tear-down.
*/
if (!ret)
kfd_process_device_remove_obj_handle(
pdd, GET_IDR_HANDLE(args->handle));
err_unlock:
mutex_unlock(&p->mutex);
return ret;
}
static int kfd_ioctl_map_memory_to_gpu(struct file *filep,
struct kfd_process *p, void *data)
{
struct kfd_ioctl_map_memory_to_gpu_args *args = data;
struct kfd_process_device *pdd, *peer_pdd;
void *mem;
struct kfd_dev *dev, *peer;
long err = 0;
int i;
uint32_t *devices_arr = NULL;
dev = kfd_device_by_id(GET_GPU_ID(args->handle));
if (!dev)
return -EINVAL;
if (!args->n_devices) {
pr_debug("Device IDs array empty\n");
return -EINVAL;
}
if (args->n_success > args->n_devices) {
pr_debug("n_success exceeds n_devices\n");
return -EINVAL;
}
devices_arr = kmalloc_array(args->n_devices, sizeof(*devices_arr),
GFP_KERNEL);
if (!devices_arr)
return -ENOMEM;
err = copy_from_user(devices_arr,
(void __user *)args->device_ids_array_ptr,
args->n_devices * sizeof(*devices_arr));
if (err != 0) {
err = -EFAULT;
goto copy_from_user_failed;
}
mutex_lock(&p->mutex);
pdd = kfd_bind_process_to_device(dev, p);
if (IS_ERR(pdd)) {
err = PTR_ERR(pdd);
goto bind_process_to_device_failed;
}
mem = kfd_process_device_translate_handle(pdd,
GET_IDR_HANDLE(args->handle));
if (!mem) {
err = -ENOMEM;
goto get_mem_obj_from_handle_failed;
}
for (i = args->n_success; i < args->n_devices; i++) {
peer = kfd_device_by_id(devices_arr[i]);
if (!peer) {
pr_debug("Getting device by id failed for 0x%x\n",
devices_arr[i]);
err = -EINVAL;
goto get_mem_obj_from_handle_failed;
}
peer_pdd = kfd_bind_process_to_device(peer, p);
if (IS_ERR(peer_pdd)) {
err = PTR_ERR(peer_pdd);
goto get_mem_obj_from_handle_failed;
}
err = amdgpu_amdkfd_gpuvm_map_memory_to_gpu(
peer->kgd, (struct kgd_mem *)mem, peer_pdd->vm);
if (err) {
pr_err("Failed to map to gpu %d/%d\n",
i, args->n_devices);
goto map_memory_to_gpu_failed;
}
args->n_success = i+1;
}
mutex_unlock(&p->mutex);
err = amdgpu_amdkfd_gpuvm_sync_memory(dev->kgd, (struct kgd_mem *) mem, true);
if (err) {
pr_debug("Sync memory failed, wait interrupted by user signal\n");
goto sync_memory_failed;
}
/* Flush TLBs after waiting for the page table updates to complete */
for (i = 0; i < args->n_devices; i++) {
peer = kfd_device_by_id(devices_arr[i]);
if (WARN_ON_ONCE(!peer))
continue;
peer_pdd = kfd_get_process_device_data(peer, p);
if (WARN_ON_ONCE(!peer_pdd))
continue;
kfd_flush_tlb(peer_pdd);
}
kfree(devices_arr);
return err;
bind_process_to_device_failed:
get_mem_obj_from_handle_failed:
map_memory_to_gpu_failed:
mutex_unlock(&p->mutex);
copy_from_user_failed:
sync_memory_failed:
kfree(devices_arr);
return err;
}
static int kfd_ioctl_unmap_memory_from_gpu(struct file *filep,
struct kfd_process *p, void *data)
{
struct kfd_ioctl_unmap_memory_from_gpu_args *args = data;
struct kfd_process_device *pdd, *peer_pdd;
void *mem;
struct kfd_dev *dev, *peer;
long err = 0;
uint32_t *devices_arr = NULL, i;
dev = kfd_device_by_id(GET_GPU_ID(args->handle));
if (!dev)
return -EINVAL;
if (!args->n_devices) {
pr_debug("Device IDs array empty\n");
return -EINVAL;
}
if (args->n_success > args->n_devices) {
pr_debug("n_success exceeds n_devices\n");
return -EINVAL;
}
devices_arr = kmalloc_array(args->n_devices, sizeof(*devices_arr),
GFP_KERNEL);
if (!devices_arr)
return -ENOMEM;
err = copy_from_user(devices_arr,
(void __user *)args->device_ids_array_ptr,
args->n_devices * sizeof(*devices_arr));
if (err != 0) {
err = -EFAULT;
goto copy_from_user_failed;
}
mutex_lock(&p->mutex);
pdd = kfd_get_process_device_data(dev, p);
if (!pdd) {
err = -EINVAL;
goto bind_process_to_device_failed;
}
mem = kfd_process_device_translate_handle(pdd,
GET_IDR_HANDLE(args->handle));
if (!mem) {
err = -ENOMEM;
goto get_mem_obj_from_handle_failed;
}
for (i = args->n_success; i < args->n_devices; i++) {
peer = kfd_device_by_id(devices_arr[i]);
if (!peer) {
err = -EINVAL;
goto get_mem_obj_from_handle_failed;
}
peer_pdd = kfd_get_process_device_data(peer, p);
if (!peer_pdd) {
err = -ENODEV;
goto get_mem_obj_from_handle_failed;
}
err = amdgpu_amdkfd_gpuvm_unmap_memory_from_gpu(
peer->kgd, (struct kgd_mem *)mem, peer_pdd->vm);
if (err) {
pr_err("Failed to unmap from gpu %d/%d\n",
i, args->n_devices);
goto unmap_memory_from_gpu_failed;
}
args->n_success = i+1;
}
kfree(devices_arr);
mutex_unlock(&p->mutex);
return 0;
bind_process_to_device_failed:
get_mem_obj_from_handle_failed:
unmap_memory_from_gpu_failed:
mutex_unlock(&p->mutex);
copy_from_user_failed:
kfree(devices_arr);
return err;
}
static int kfd_ioctl_alloc_queue_gws(struct file *filep,
struct kfd_process *p, void *data)
{
int retval;
struct kfd_ioctl_alloc_queue_gws_args *args = data;
struct kfd_dev *dev;
if (!hws_gws_support)
return -ENODEV;
dev = kfd_device_by_id(args->gpu_id);
if (!dev) {
pr_debug("Could not find gpu id 0x%x\n", args->gpu_id);
return -ENODEV;
}
if (dev->dqm->sched_policy == KFD_SCHED_POLICY_NO_HWS)
return -ENODEV;
mutex_lock(&p->mutex);
retval = pqm_set_gws(&p->pqm, args->queue_id, args->num_gws ? dev->gws : NULL);
mutex_unlock(&p->mutex);
args->first_gws = 0;
return retval;
}
static int kfd_ioctl_get_dmabuf_info(struct file *filep,
struct kfd_process *p, void *data)
{
struct kfd_ioctl_get_dmabuf_info_args *args = data;
struct kfd_dev *dev = NULL;
struct kgd_dev *dma_buf_kgd;
void *metadata_buffer = NULL;
uint32_t flags;
unsigned int i;
int r;
/* Find a KFD GPU device that supports the get_dmabuf_info query */
for (i = 0; kfd_topology_enum_kfd_devices(i, &dev) == 0; i++)
if (dev)
break;
if (!dev)
return -EINVAL;
if (args->metadata_ptr) {
metadata_buffer = kzalloc(args->metadata_size, GFP_KERNEL);
if (!metadata_buffer)
return -ENOMEM;
}
/* Get dmabuf info from KGD */
r = amdgpu_amdkfd_get_dmabuf_info(dev->kgd, args->dmabuf_fd,
&dma_buf_kgd, &args->size,
metadata_buffer, args->metadata_size,
&args->metadata_size, &flags);
if (r)
goto exit;
/* Reverse-lookup gpu_id from kgd pointer */
dev = kfd_device_by_kgd(dma_buf_kgd);
if (!dev) {
r = -EINVAL;
goto exit;
}
args->gpu_id = dev->id;
args->flags = flags;
/* Copy metadata buffer to user mode */
if (metadata_buffer) {
r = copy_to_user((void __user *)args->metadata_ptr,
metadata_buffer, args->metadata_size);
if (r != 0)
r = -EFAULT;
}
exit:
kfree(metadata_buffer);
return r;
}
static int kfd_ioctl_import_dmabuf(struct file *filep,
struct kfd_process *p, void *data)
{
struct kfd_ioctl_import_dmabuf_args *args = data;
struct kfd_process_device *pdd;
struct dma_buf *dmabuf;
struct kfd_dev *dev;
int idr_handle;
uint64_t size;
void *mem;
int r;
dev = kfd_device_by_id(args->gpu_id);
if (!dev)
return -EINVAL;
dmabuf = dma_buf_get(args->dmabuf_fd);
if (IS_ERR(dmabuf))
return PTR_ERR(dmabuf);
mutex_lock(&p->mutex);
pdd = kfd_bind_process_to_device(dev, p);
if (IS_ERR(pdd)) {
r = PTR_ERR(pdd);
goto err_unlock;
}
r = amdgpu_amdkfd_gpuvm_import_dmabuf(dev->kgd, dmabuf,
args->va_addr, pdd->vm,
(struct kgd_mem **)&mem, &size,
NULL);
if (r)
goto err_unlock;
idr_handle = kfd_process_device_create_obj_handle(pdd, mem);
if (idr_handle < 0) {
r = -EFAULT;
goto err_free;
}
mutex_unlock(&p->mutex);
args->handle = MAKE_HANDLE(args->gpu_id, idr_handle);
return 0;
err_free:
amdgpu_amdkfd_gpuvm_free_memory_of_gpu(dev->kgd, (struct kgd_mem *)mem);
err_unlock:
mutex_unlock(&p->mutex);
return r;
}
#define AMDKFD_IOCTL_DEF(ioctl, _func, _flags) \
[_IOC_NR(ioctl)] = {.cmd = ioctl, .func = _func, .flags = _flags, \
.cmd_drv = 0, .name = #ioctl}
/** Ioctl table */
static const struct amdkfd_ioctl_desc amdkfd_ioctls[] = {
AMDKFD_IOCTL_DEF(AMDKFD_IOC_GET_VERSION,
kfd_ioctl_get_version, 0),
AMDKFD_IOCTL_DEF(AMDKFD_IOC_CREATE_QUEUE,
kfd_ioctl_create_queue, 0),
AMDKFD_IOCTL_DEF(AMDKFD_IOC_DESTROY_QUEUE,
kfd_ioctl_destroy_queue, 0),
AMDKFD_IOCTL_DEF(AMDKFD_IOC_SET_MEMORY_POLICY,
kfd_ioctl_set_memory_policy, 0),
AMDKFD_IOCTL_DEF(AMDKFD_IOC_GET_CLOCK_COUNTERS,
kfd_ioctl_get_clock_counters, 0),
AMDKFD_IOCTL_DEF(AMDKFD_IOC_GET_PROCESS_APERTURES,
kfd_ioctl_get_process_apertures, 0),
AMDKFD_IOCTL_DEF(AMDKFD_IOC_UPDATE_QUEUE,
kfd_ioctl_update_queue, 0),
AMDKFD_IOCTL_DEF(AMDKFD_IOC_CREATE_EVENT,
kfd_ioctl_create_event, 0),
AMDKFD_IOCTL_DEF(AMDKFD_IOC_DESTROY_EVENT,
kfd_ioctl_destroy_event, 0),
AMDKFD_IOCTL_DEF(AMDKFD_IOC_SET_EVENT,
kfd_ioctl_set_event, 0),
AMDKFD_IOCTL_DEF(AMDKFD_IOC_RESET_EVENT,
kfd_ioctl_reset_event, 0),
AMDKFD_IOCTL_DEF(AMDKFD_IOC_WAIT_EVENTS,
kfd_ioctl_wait_events, 0),
drm/amdkfd: add H/W debugger IOCTL set definitions This patch adds four new IOCTLs to amdkfd. These IOCTLs expose a H/W debugger functionality to the userspace. The IOCTLs are: - AMDKFD_IOC_DBG_REGISTER: The purpose of this IOCTL is to notify amdkfd that a process wants to use GPU debugging facilities on itself only. It is expected that this IOCTL would be called before any other H/W debugger requests are sent to amdkfd and for each GPU where the H/W debugging needs to be enabled. The use of this IOCTL ensures that only one instance of a debugger is active in the system. - AMDKFD_IOC_DBG_UNREGISTER: This IOCTL detaches the debugger/debugged process from the H/W Debug which was established by the AMDKFD_IOC_DBG_REGISTER IOCTL. - AMDKFD_IOC_DBG_ADDRESS_WATCH: This IOCTL allows to set different watchpoints with various conditions as indicated by the IOCTL's arguments. The available number of watchpoints is retrieved from topology. This operation is confined to the current debugged process, which was registered through AMDKFD_IOC_DBG_REGISTER. - AMDKFD_IOC_DBG_WAVE_CONTROL: This IOCTL allows to control a wavefront as indicated by the IOCTL's arguments. For example, you can halt/resume or kill either a single wavefront or a set of wavefronts. This operation is confined to the current debugged process, which was registered through AMDKFD_IOC_DBG_REGISTER. Because the arguments for the address watch IOCTL and wave control IOCTL are dynamic, meaning that they could vary in size, the userspace passes a pointer to a structure (in userspace) that contains the value of the arguments. The kernel driver is responsible to parse this structure and validate its contents. v2: change void* to uint64_t inside ioctl arguments Signed-off-by: Yair Shachar <yair.shachar@amd.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2014-12-07 08:05:22 -07:00
AMDKFD_IOCTL_DEF(AMDKFD_IOC_DBG_REGISTER,
kfd_ioctl_dbg_register, 0),
AMDKFD_IOCTL_DEF(AMDKFD_IOC_DBG_UNREGISTER,
kfd_ioctl_dbg_unregister, 0),
drm/amdkfd: add H/W debugger IOCTL set definitions This patch adds four new IOCTLs to amdkfd. These IOCTLs expose a H/W debugger functionality to the userspace. The IOCTLs are: - AMDKFD_IOC_DBG_REGISTER: The purpose of this IOCTL is to notify amdkfd that a process wants to use GPU debugging facilities on itself only. It is expected that this IOCTL would be called before any other H/W debugger requests are sent to amdkfd and for each GPU where the H/W debugging needs to be enabled. The use of this IOCTL ensures that only one instance of a debugger is active in the system. - AMDKFD_IOC_DBG_UNREGISTER: This IOCTL detaches the debugger/debugged process from the H/W Debug which was established by the AMDKFD_IOC_DBG_REGISTER IOCTL. - AMDKFD_IOC_DBG_ADDRESS_WATCH: This IOCTL allows to set different watchpoints with various conditions as indicated by the IOCTL's arguments. The available number of watchpoints is retrieved from topology. This operation is confined to the current debugged process, which was registered through AMDKFD_IOC_DBG_REGISTER. - AMDKFD_IOC_DBG_WAVE_CONTROL: This IOCTL allows to control a wavefront as indicated by the IOCTL's arguments. For example, you can halt/resume or kill either a single wavefront or a set of wavefronts. This operation is confined to the current debugged process, which was registered through AMDKFD_IOC_DBG_REGISTER. Because the arguments for the address watch IOCTL and wave control IOCTL are dynamic, meaning that they could vary in size, the userspace passes a pointer to a structure (in userspace) that contains the value of the arguments. The kernel driver is responsible to parse this structure and validate its contents. v2: change void* to uint64_t inside ioctl arguments Signed-off-by: Yair Shachar <yair.shachar@amd.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2014-12-07 08:05:22 -07:00
AMDKFD_IOCTL_DEF(AMDKFD_IOC_DBG_ADDRESS_WATCH,
kfd_ioctl_dbg_address_watch, 0),
AMDKFD_IOCTL_DEF(AMDKFD_IOC_DBG_WAVE_CONTROL,
kfd_ioctl_dbg_wave_control, 0),
AMDKFD_IOCTL_DEF(AMDKFD_IOC_SET_SCRATCH_BACKING_VA,
kfd_ioctl_set_scratch_backing_va, 0),
AMDKFD_IOCTL_DEF(AMDKFD_IOC_GET_TILE_CONFIG,
kfd_ioctl_get_tile_config, 0),
AMDKFD_IOCTL_DEF(AMDKFD_IOC_SET_TRAP_HANDLER,
kfd_ioctl_set_trap_handler, 0),
AMDKFD_IOCTL_DEF(AMDKFD_IOC_GET_PROCESS_APERTURES_NEW,
kfd_ioctl_get_process_apertures_new, 0),
AMDKFD_IOCTL_DEF(AMDKFD_IOC_ACQUIRE_VM,
kfd_ioctl_acquire_vm, 0),
AMDKFD_IOCTL_DEF(AMDKFD_IOC_ALLOC_MEMORY_OF_GPU,
kfd_ioctl_alloc_memory_of_gpu, 0),
AMDKFD_IOCTL_DEF(AMDKFD_IOC_FREE_MEMORY_OF_GPU,
kfd_ioctl_free_memory_of_gpu, 0),
AMDKFD_IOCTL_DEF(AMDKFD_IOC_MAP_MEMORY_TO_GPU,
kfd_ioctl_map_memory_to_gpu, 0),
AMDKFD_IOCTL_DEF(AMDKFD_IOC_UNMAP_MEMORY_FROM_GPU,
kfd_ioctl_unmap_memory_from_gpu, 0),
AMDKFD_IOCTL_DEF(AMDKFD_IOC_SET_CU_MASK,
kfd_ioctl_set_cu_mask, 0),
AMDKFD_IOCTL_DEF(AMDKFD_IOC_GET_QUEUE_WAVE_STATE,
kfd_ioctl_get_queue_wave_state, 0),
AMDKFD_IOCTL_DEF(AMDKFD_IOC_GET_DMABUF_INFO,
kfd_ioctl_get_dmabuf_info, 0),
AMDKFD_IOCTL_DEF(AMDKFD_IOC_IMPORT_DMABUF,
kfd_ioctl_import_dmabuf, 0),
AMDKFD_IOCTL_DEF(AMDKFD_IOC_ALLOC_QUEUE_GWS,
kfd_ioctl_alloc_queue_gws, 0),
};
#define AMDKFD_CORE_IOCTL_COUNT ARRAY_SIZE(amdkfd_ioctls)
static long kfd_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
{
struct kfd_process *process;
amdkfd_ioctl_t *func;
const struct amdkfd_ioctl_desc *ioctl = NULL;
unsigned int nr = _IOC_NR(cmd);
char stack_kdata[128];
char *kdata = NULL;
unsigned int usize, asize;
int retcode = -EINVAL;
if (nr >= AMDKFD_CORE_IOCTL_COUNT)
goto err_i1;
if ((nr >= AMDKFD_COMMAND_START) && (nr < AMDKFD_COMMAND_END)) {
u32 amdkfd_size;
ioctl = &amdkfd_ioctls[nr];
amdkfd_size = _IOC_SIZE(ioctl->cmd);
usize = asize = _IOC_SIZE(cmd);
if (amdkfd_size > asize)
asize = amdkfd_size;
cmd = ioctl->cmd;
} else
goto err_i1;
dev_dbg(kfd_device, "ioctl cmd 0x%x (#%d), arg 0x%lx\n", cmd, nr, arg);
amdkfd: Add basic modules to amdkfd This patch adds the process module and three helper modules: - kfd_process, which handles process which open /dev/kfd - kfd_doorbell, which provides helper functions for doorbell allocation, release and mapping to userspace - kfd_pasid, which provides helper functions for pasid allocation and release - kfd_aperture, which provides helper functions for managing the LDS, Local GPU memory and Scratch memory apertures of the process This patch only contains the basic kfd_process module, which doesn't contain the reference to the queue scheduler. This was done to allow easier code review. Also, this patch doesn't contain the calls to the IOMMU driver for binding the pasid to the device. Again, this was done to allow easier code review The kfd_process object is created when a process opens /dev/kfd and is closed when the mm_struct of that process is teared-down. v3: Removed kfd_vidmem.c file Replaced direct mmput call to mmu_notifier release Removed typedefs Moved bool field to end of the structure Added new kernel params for gart usage limitation Added initialization of sa manager Fixed debug messages Remove support for LDS in 32 bit Changed code to support mmap of doorbell pages from userspace Added documentation for apertures v4: Replaced RCU by SRCU for kfd_process list management v5: Move amdkfd from drm/radeon/ to drm/amd/ Rename kfd_aperture.c to kfd_flat_memory.c Protect against multiple init calls MQD size is H/W dependent so moved it to device info structure Rename kfd_mem_obj structure's members Use delayed function for process tear-down Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
2014-07-16 14:25:31 -06:00
process = kfd_get_process(current);
if (IS_ERR(process)) {
dev_dbg(kfd_device, "no process\n");
goto err_i1;
}
/* Do not trust userspace, use our own definition */
func = ioctl->func;
if (unlikely(!func)) {
dev_dbg(kfd_device, "no function\n");
retcode = -EINVAL;
goto err_i1;
}
if (cmd & (IOC_IN | IOC_OUT)) {
if (asize <= sizeof(stack_kdata)) {
kdata = stack_kdata;
} else {
kdata = kmalloc(asize, GFP_KERNEL);
if (!kdata) {
retcode = -ENOMEM;
goto err_i1;
}
}
if (asize > usize)
memset(kdata + usize, 0, asize - usize);
}
if (cmd & IOC_IN) {
if (copy_from_user(kdata, (void __user *)arg, usize) != 0) {
retcode = -EFAULT;
goto err_i1;
}
} else if (cmd & IOC_OUT) {
memset(kdata, 0, usize);
}
retcode = func(filep, process, kdata);
if (cmd & IOC_OUT)
if (copy_to_user((void __user *)arg, kdata, usize) != 0)
retcode = -EFAULT;
err_i1:
if (!ioctl)
dev_dbg(kfd_device, "invalid ioctl: pid=%d, cmd=0x%02x, nr=0x%02x\n",
task_pid_nr(current), cmd, nr);
if (kdata != stack_kdata)
kfree(kdata);
if (retcode)
dev_dbg(kfd_device, "ret = %d\n", retcode);
return retcode;
}
amdkfd: Add basic modules to amdkfd This patch adds the process module and three helper modules: - kfd_process, which handles process which open /dev/kfd - kfd_doorbell, which provides helper functions for doorbell allocation, release and mapping to userspace - kfd_pasid, which provides helper functions for pasid allocation and release - kfd_aperture, which provides helper functions for managing the LDS, Local GPU memory and Scratch memory apertures of the process This patch only contains the basic kfd_process module, which doesn't contain the reference to the queue scheduler. This was done to allow easier code review. Also, this patch doesn't contain the calls to the IOMMU driver for binding the pasid to the device. Again, this was done to allow easier code review The kfd_process object is created when a process opens /dev/kfd and is closed when the mm_struct of that process is teared-down. v3: Removed kfd_vidmem.c file Replaced direct mmput call to mmu_notifier release Removed typedefs Moved bool field to end of the structure Added new kernel params for gart usage limitation Added initialization of sa manager Fixed debug messages Remove support for LDS in 32 bit Changed code to support mmap of doorbell pages from userspace Added documentation for apertures v4: Replaced RCU by SRCU for kfd_process list management v5: Move amdkfd from drm/radeon/ to drm/amd/ Rename kfd_aperture.c to kfd_flat_memory.c Protect against multiple init calls MQD size is H/W dependent so moved it to device info structure Rename kfd_mem_obj structure's members Use delayed function for process tear-down Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
2014-07-16 14:25:31 -06:00
static int kfd_mmio_mmap(struct kfd_dev *dev, struct kfd_process *process,
struct vm_area_struct *vma)
{
phys_addr_t address;
int ret;
if (vma->vm_end - vma->vm_start != PAGE_SIZE)
return -EINVAL;
address = amdgpu_amdkfd_get_mmio_remap_phys_addr(dev->kgd);
vma->vm_flags |= VM_IO | VM_DONTCOPY | VM_DONTEXPAND | VM_NORESERVE |
VM_DONTDUMP | VM_PFNMAP;
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
pr_debug("Process %d mapping mmio page\n"
" target user address == 0x%08llX\n"
" physical address == 0x%08llX\n"
" vm_flags == 0x%04lX\n"
" size == 0x%04lX\n",
process->pasid, (unsigned long long) vma->vm_start,
address, vma->vm_flags, PAGE_SIZE);
ret = io_remap_pfn_range(vma,
vma->vm_start,
address >> PAGE_SHIFT,
PAGE_SIZE,
vma->vm_page_prot);
return ret;
}
amdkfd: Add basic modules to amdkfd This patch adds the process module and three helper modules: - kfd_process, which handles process which open /dev/kfd - kfd_doorbell, which provides helper functions for doorbell allocation, release and mapping to userspace - kfd_pasid, which provides helper functions for pasid allocation and release - kfd_aperture, which provides helper functions for managing the LDS, Local GPU memory and Scratch memory apertures of the process This patch only contains the basic kfd_process module, which doesn't contain the reference to the queue scheduler. This was done to allow easier code review. Also, this patch doesn't contain the calls to the IOMMU driver for binding the pasid to the device. Again, this was done to allow easier code review The kfd_process object is created when a process opens /dev/kfd and is closed when the mm_struct of that process is teared-down. v3: Removed kfd_vidmem.c file Replaced direct mmput call to mmu_notifier release Removed typedefs Moved bool field to end of the structure Added new kernel params for gart usage limitation Added initialization of sa manager Fixed debug messages Remove support for LDS in 32 bit Changed code to support mmap of doorbell pages from userspace Added documentation for apertures v4: Replaced RCU by SRCU for kfd_process list management v5: Move amdkfd from drm/radeon/ to drm/amd/ Rename kfd_aperture.c to kfd_flat_memory.c Protect against multiple init calls MQD size is H/W dependent so moved it to device info structure Rename kfd_mem_obj structure's members Use delayed function for process tear-down Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
2014-07-16 14:25:31 -06:00
static int kfd_mmap(struct file *filp, struct vm_area_struct *vma)
{
struct kfd_process *process;
struct kfd_dev *dev = NULL;
unsigned long vm_pgoff;
unsigned int gpu_id;
amdkfd: Add basic modules to amdkfd This patch adds the process module and three helper modules: - kfd_process, which handles process which open /dev/kfd - kfd_doorbell, which provides helper functions for doorbell allocation, release and mapping to userspace - kfd_pasid, which provides helper functions for pasid allocation and release - kfd_aperture, which provides helper functions for managing the LDS, Local GPU memory and Scratch memory apertures of the process This patch only contains the basic kfd_process module, which doesn't contain the reference to the queue scheduler. This was done to allow easier code review. Also, this patch doesn't contain the calls to the IOMMU driver for binding the pasid to the device. Again, this was done to allow easier code review The kfd_process object is created when a process opens /dev/kfd and is closed when the mm_struct of that process is teared-down. v3: Removed kfd_vidmem.c file Replaced direct mmput call to mmu_notifier release Removed typedefs Moved bool field to end of the structure Added new kernel params for gart usage limitation Added initialization of sa manager Fixed debug messages Remove support for LDS in 32 bit Changed code to support mmap of doorbell pages from userspace Added documentation for apertures v4: Replaced RCU by SRCU for kfd_process list management v5: Move amdkfd from drm/radeon/ to drm/amd/ Rename kfd_aperture.c to kfd_flat_memory.c Protect against multiple init calls MQD size is H/W dependent so moved it to device info structure Rename kfd_mem_obj structure's members Use delayed function for process tear-down Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
2014-07-16 14:25:31 -06:00
process = kfd_get_process(current);
if (IS_ERR(process))
return PTR_ERR(process);
vm_pgoff = vma->vm_pgoff;
vma->vm_pgoff = KFD_MMAP_OFFSET_VALUE_GET(vm_pgoff);
gpu_id = KFD_MMAP_GPU_ID_GET(vm_pgoff);
if (gpu_id)
dev = kfd_device_by_id(gpu_id);
switch (vm_pgoff & KFD_MMAP_TYPE_MASK) {
case KFD_MMAP_TYPE_DOORBELL:
if (!dev)
return -ENODEV;
return kfd_doorbell_mmap(dev, process, vma);
case KFD_MMAP_TYPE_EVENTS:
return kfd_event_mmap(process, vma);
case KFD_MMAP_TYPE_RESERVED_MEM:
if (!dev)
return -ENODEV;
return kfd_reserved_mem_mmap(dev, process, vma);
case KFD_MMAP_TYPE_MMIO:
if (!dev)
return -ENODEV;
return kfd_mmio_mmap(dev, process, vma);
}
return -EFAULT;
amdkfd: Add basic modules to amdkfd This patch adds the process module and three helper modules: - kfd_process, which handles process which open /dev/kfd - kfd_doorbell, which provides helper functions for doorbell allocation, release and mapping to userspace - kfd_pasid, which provides helper functions for pasid allocation and release - kfd_aperture, which provides helper functions for managing the LDS, Local GPU memory and Scratch memory apertures of the process This patch only contains the basic kfd_process module, which doesn't contain the reference to the queue scheduler. This was done to allow easier code review. Also, this patch doesn't contain the calls to the IOMMU driver for binding the pasid to the device. Again, this was done to allow easier code review The kfd_process object is created when a process opens /dev/kfd and is closed when the mm_struct of that process is teared-down. v3: Removed kfd_vidmem.c file Replaced direct mmput call to mmu_notifier release Removed typedefs Moved bool field to end of the structure Added new kernel params for gart usage limitation Added initialization of sa manager Fixed debug messages Remove support for LDS in 32 bit Changed code to support mmap of doorbell pages from userspace Added documentation for apertures v4: Replaced RCU by SRCU for kfd_process list management v5: Move amdkfd from drm/radeon/ to drm/amd/ Rename kfd_aperture.c to kfd_flat_memory.c Protect against multiple init calls MQD size is H/W dependent so moved it to device info structure Rename kfd_mem_obj structure's members Use delayed function for process tear-down Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
2014-07-16 14:25:31 -06:00
}