1
0
Fork 0
alistair23-linux/drivers/char/tpm/tpm_i2c_nuvoton.c

668 lines
18 KiB
C
Raw Normal View History

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13 Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details [based] [from] [clk] [highbank] [c] you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 355 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154041.837383322@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-19 07:51:43 -06:00
// SPDX-License-Identifier: GPL-2.0-or-later
/******************************************************************************
* Nuvoton TPM I2C Device Driver Interface for WPCT301/NPCT501/NPCT6XX,
* based on the TCG TPM Interface Spec version 1.2.
* Specifications at www.trustedcomputinggroup.org
*
* Copyright (C) 2011, Nuvoton Technology Corporation.
* Dan Morav <dan.morav@nuvoton.com>
* Copyright (C) 2013, Obsidian Research Corp.
* Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
*
* Nuvoton contact information: APC.Support@nuvoton.com
*****************************************************************************/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/wait.h>
#include <linux/i2c.h>
#include <linux/of_device.h>
#include "tpm.h"
/* I2C interface offsets */
#define TPM_STS 0x00
#define TPM_BURST_COUNT 0x01
#define TPM_DATA_FIFO_W 0x20
#define TPM_DATA_FIFO_R 0x40
#define TPM_VID_DID_RID 0x60
#define TPM_I2C_RETRIES 5
/*
* I2C bus device maximum buffer size w/o counting I2C address or command
* i.e. max size required for I2C write is 34 = addr, command, 32 bytes data
*/
#define TPM_I2C_MAX_BUF_SIZE 32
#define TPM_I2C_RETRY_COUNT 32
tpm: msleep() delays - replace with usleep_range() in i2c nuvoton driver Commit 500462a9de65 "timers: Switch to a non-cascading wheel" replaced the 'classic' timer wheel, which aimed for near 'exact' expiry of the timers. Their analysis was that the vast majority of timeout timers are used as safeguards, not as real timers, and are cancelled or rearmed before expiration. The only exception noted to this were networking timers with a small expiry time. Not included in the analysis was the TPM polling timer, which resulted in a longer normal delay and, every so often, a very long delay. The non-cascading wheel delay is based on CONFIG_HZ. For a description of the different rings and their delays, refer to the comments in kernel/time/timer.c. Below are the delays given for rings 0 - 2, which explains the longer "normal" delays and the very, long delays as seen on systems with CONFIG_HZ 250. * HZ 1000 steps * Level Offset Granularity Range * 0 0 1 ms 0 ms - 63 ms * 1 64 8 ms 64 ms - 511 ms * 2 128 64 ms 512 ms - 4095 ms (512ms - ~4s) * HZ 250 * Level Offset Granularity Range * 0 0 4 ms 0 ms - 255 ms * 1 64 32 ms 256 ms - 2047 ms (256ms - ~2s) * 2 128 256 ms 2048 ms - 16383 ms (~2s - ~16s) Below is a comparison of extending the TPM with 1000 measurements, using msleep() vs. usleep_delay() when configured for 1000 hz vs. 250 hz, before and after commit 500462a9de65. linux-4.7 | msleep() usleep_range() 1000 hz: 0m44.628s | 1m34.497s 29.243s 250 hz: 1m28.510s | 4m49.269s 32.386s linux-4.7 | min-max (msleep) min-max (usleep_range) 1000 hz: 0:017 - 2:760s | 0:015 - 3:967s 0:014 - 0:418s 250 hz: 0:028 - 1:954s | 0:040 - 4:096s 0:016 - 0:816s This patch replaces the msleep() with usleep_range() calls in the i2c nuvoton driver with a consistent max range value. Signed-of-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: stable@vger.kernel.org (linux-4.8) Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-03-10 11:45:53 -07:00
#define TPM_I2C_BUS_DELAY 1000 /* usec */
#define TPM_I2C_RETRY_DELAY_SHORT (2 * 1000) /* usec */
#define TPM_I2C_RETRY_DELAY_LONG (10 * 1000) /* usec */
#define TPM_I2C_DELAY_RANGE 300 /* usec */
#define OF_IS_TPM2 ((void *)1)
#define I2C_IS_TPM2 1
struct priv_data {
int irq;
unsigned int intrs;
wait_queue_head_t read_queue;
};
static s32 i2c_nuvoton_read_buf(struct i2c_client *client, u8 offset, u8 size,
u8 *data)
{
s32 status;
status = i2c_smbus_read_i2c_block_data(client, offset, size, data);
dev_dbg(&client->dev,
"%s(offset=%u size=%u data=%*ph) -> sts=%d\n", __func__,
offset, size, (int)size, data, status);
return status;
}
static s32 i2c_nuvoton_write_buf(struct i2c_client *client, u8 offset, u8 size,
u8 *data)
{
s32 status;
status = i2c_smbus_write_i2c_block_data(client, offset, size, data);
dev_dbg(&client->dev,
"%s(offset=%u size=%u data=%*ph) -> sts=%d\n", __func__,
offset, size, (int)size, data, status);
return status;
}
#define TPM_STS_VALID 0x80
#define TPM_STS_COMMAND_READY 0x40
#define TPM_STS_GO 0x20
#define TPM_STS_DATA_AVAIL 0x10
#define TPM_STS_EXPECT 0x08
#define TPM_STS_RESPONSE_RETRY 0x02
#define TPM_STS_ERR_VAL 0x07 /* bit2...bit0 reads always 0 */
#define TPM_I2C_SHORT_TIMEOUT 750 /* ms */
#define TPM_I2C_LONG_TIMEOUT 2000 /* 2 sec */
/* read TPM_STS register */
static u8 i2c_nuvoton_read_status(struct tpm_chip *chip)
{
struct i2c_client *client = to_i2c_client(chip->dev.parent);
s32 status;
u8 data;
status = i2c_nuvoton_read_buf(client, TPM_STS, 1, &data);
if (status <= 0) {
dev_err(&chip->dev, "%s() error return %d\n", __func__,
status);
data = TPM_STS_ERR_VAL;
}
return data;
}
/* write byte to TPM_STS register */
static s32 i2c_nuvoton_write_status(struct i2c_client *client, u8 data)
{
s32 status;
int i;
/* this causes the current command to be aborted */
for (i = 0, status = -1; i < TPM_I2C_RETRY_COUNT && status < 0; i++) {
status = i2c_nuvoton_write_buf(client, TPM_STS, 1, &data);
if (status < 0)
usleep_range(TPM_I2C_BUS_DELAY, TPM_I2C_BUS_DELAY
+ TPM_I2C_DELAY_RANGE);
}
return status;
}
/* write commandReady to TPM_STS register */
static void i2c_nuvoton_ready(struct tpm_chip *chip)
{
struct i2c_client *client = to_i2c_client(chip->dev.parent);
s32 status;
/* this causes the current command to be aborted */
status = i2c_nuvoton_write_status(client, TPM_STS_COMMAND_READY);
if (status < 0)
dev_err(&chip->dev,
"%s() fail to write TPM_STS.commandReady\n", __func__);
}
/* read burstCount field from TPM_STS register
* return -1 on fail to read */
static int i2c_nuvoton_get_burstcount(struct i2c_client *client,
struct tpm_chip *chip)
{
unsigned long stop = jiffies + chip->timeout_d;
s32 status;
int burst_count = -1;
u8 data;
/* wait for burstcount to be non-zero */
do {
/* in I2C burstCount is 1 byte */
status = i2c_nuvoton_read_buf(client, TPM_BURST_COUNT, 1,
&data);
if (status > 0 && data > 0) {
burst_count = min_t(u8, TPM_I2C_MAX_BUF_SIZE, data);
break;
}
tpm: msleep() delays - replace with usleep_range() in i2c nuvoton driver Commit 500462a9de65 "timers: Switch to a non-cascading wheel" replaced the 'classic' timer wheel, which aimed for near 'exact' expiry of the timers. Their analysis was that the vast majority of timeout timers are used as safeguards, not as real timers, and are cancelled or rearmed before expiration. The only exception noted to this were networking timers with a small expiry time. Not included in the analysis was the TPM polling timer, which resulted in a longer normal delay and, every so often, a very long delay. The non-cascading wheel delay is based on CONFIG_HZ. For a description of the different rings and their delays, refer to the comments in kernel/time/timer.c. Below are the delays given for rings 0 - 2, which explains the longer "normal" delays and the very, long delays as seen on systems with CONFIG_HZ 250. * HZ 1000 steps * Level Offset Granularity Range * 0 0 1 ms 0 ms - 63 ms * 1 64 8 ms 64 ms - 511 ms * 2 128 64 ms 512 ms - 4095 ms (512ms - ~4s) * HZ 250 * Level Offset Granularity Range * 0 0 4 ms 0 ms - 255 ms * 1 64 32 ms 256 ms - 2047 ms (256ms - ~2s) * 2 128 256 ms 2048 ms - 16383 ms (~2s - ~16s) Below is a comparison of extending the TPM with 1000 measurements, using msleep() vs. usleep_delay() when configured for 1000 hz vs. 250 hz, before and after commit 500462a9de65. linux-4.7 | msleep() usleep_range() 1000 hz: 0m44.628s | 1m34.497s 29.243s 250 hz: 1m28.510s | 4m49.269s 32.386s linux-4.7 | min-max (msleep) min-max (usleep_range) 1000 hz: 0:017 - 2:760s | 0:015 - 3:967s 0:014 - 0:418s 250 hz: 0:028 - 1:954s | 0:040 - 4:096s 0:016 - 0:816s This patch replaces the msleep() with usleep_range() calls in the i2c nuvoton driver with a consistent max range value. Signed-of-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: stable@vger.kernel.org (linux-4.8) Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-03-10 11:45:53 -07:00
usleep_range(TPM_I2C_BUS_DELAY, TPM_I2C_BUS_DELAY
+ TPM_I2C_DELAY_RANGE);
} while (time_before(jiffies, stop));
return burst_count;
}
/*
* WPCT301/NPCT501/NPCT6XX SINT# supports only dataAvail
* any call to this function which is not waiting for dataAvail will
* set queue to NULL to avoid waiting for interrupt
*/
static bool i2c_nuvoton_check_status(struct tpm_chip *chip, u8 mask, u8 value)
{
u8 status = i2c_nuvoton_read_status(chip);
return (status != TPM_STS_ERR_VAL) && ((status & mask) == value);
}
static int i2c_nuvoton_wait_for_stat(struct tpm_chip *chip, u8 mask, u8 value,
u32 timeout, wait_queue_head_t *queue)
{
if ((chip->flags & TPM_CHIP_FLAG_IRQ) && queue) {
s32 rc;
struct priv_data *priv = dev_get_drvdata(&chip->dev);
unsigned int cur_intrs = priv->intrs;
enable_irq(priv->irq);
rc = wait_event_interruptible_timeout(*queue,
cur_intrs != priv->intrs,
timeout);
if (rc > 0)
return 0;
/* At this point we know that the SINT pin is asserted, so we
* do not need to do i2c_nuvoton_check_status */
} else {
unsigned long ten_msec, stop;
bool status_valid;
/* check current status */
status_valid = i2c_nuvoton_check_status(chip, mask, value);
if (status_valid)
return 0;
/* use polling to wait for the event */
tpm: msleep() delays - replace with usleep_range() in i2c nuvoton driver Commit 500462a9de65 "timers: Switch to a non-cascading wheel" replaced the 'classic' timer wheel, which aimed for near 'exact' expiry of the timers. Their analysis was that the vast majority of timeout timers are used as safeguards, not as real timers, and are cancelled or rearmed before expiration. The only exception noted to this were networking timers with a small expiry time. Not included in the analysis was the TPM polling timer, which resulted in a longer normal delay and, every so often, a very long delay. The non-cascading wheel delay is based on CONFIG_HZ. For a description of the different rings and their delays, refer to the comments in kernel/time/timer.c. Below are the delays given for rings 0 - 2, which explains the longer "normal" delays and the very, long delays as seen on systems with CONFIG_HZ 250. * HZ 1000 steps * Level Offset Granularity Range * 0 0 1 ms 0 ms - 63 ms * 1 64 8 ms 64 ms - 511 ms * 2 128 64 ms 512 ms - 4095 ms (512ms - ~4s) * HZ 250 * Level Offset Granularity Range * 0 0 4 ms 0 ms - 255 ms * 1 64 32 ms 256 ms - 2047 ms (256ms - ~2s) * 2 128 256 ms 2048 ms - 16383 ms (~2s - ~16s) Below is a comparison of extending the TPM with 1000 measurements, using msleep() vs. usleep_delay() when configured for 1000 hz vs. 250 hz, before and after commit 500462a9de65. linux-4.7 | msleep() usleep_range() 1000 hz: 0m44.628s | 1m34.497s 29.243s 250 hz: 1m28.510s | 4m49.269s 32.386s linux-4.7 | min-max (msleep) min-max (usleep_range) 1000 hz: 0:017 - 2:760s | 0:015 - 3:967s 0:014 - 0:418s 250 hz: 0:028 - 1:954s | 0:040 - 4:096s 0:016 - 0:816s This patch replaces the msleep() with usleep_range() calls in the i2c nuvoton driver with a consistent max range value. Signed-of-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: stable@vger.kernel.org (linux-4.8) Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-03-10 11:45:53 -07:00
ten_msec = jiffies + usecs_to_jiffies(TPM_I2C_RETRY_DELAY_LONG);
stop = jiffies + timeout;
do {
if (time_before(jiffies, ten_msec))
tpm: msleep() delays - replace with usleep_range() in i2c nuvoton driver Commit 500462a9de65 "timers: Switch to a non-cascading wheel" replaced the 'classic' timer wheel, which aimed for near 'exact' expiry of the timers. Their analysis was that the vast majority of timeout timers are used as safeguards, not as real timers, and are cancelled or rearmed before expiration. The only exception noted to this were networking timers with a small expiry time. Not included in the analysis was the TPM polling timer, which resulted in a longer normal delay and, every so often, a very long delay. The non-cascading wheel delay is based on CONFIG_HZ. For a description of the different rings and their delays, refer to the comments in kernel/time/timer.c. Below are the delays given for rings 0 - 2, which explains the longer "normal" delays and the very, long delays as seen on systems with CONFIG_HZ 250. * HZ 1000 steps * Level Offset Granularity Range * 0 0 1 ms 0 ms - 63 ms * 1 64 8 ms 64 ms - 511 ms * 2 128 64 ms 512 ms - 4095 ms (512ms - ~4s) * HZ 250 * Level Offset Granularity Range * 0 0 4 ms 0 ms - 255 ms * 1 64 32 ms 256 ms - 2047 ms (256ms - ~2s) * 2 128 256 ms 2048 ms - 16383 ms (~2s - ~16s) Below is a comparison of extending the TPM with 1000 measurements, using msleep() vs. usleep_delay() when configured for 1000 hz vs. 250 hz, before and after commit 500462a9de65. linux-4.7 | msleep() usleep_range() 1000 hz: 0m44.628s | 1m34.497s 29.243s 250 hz: 1m28.510s | 4m49.269s 32.386s linux-4.7 | min-max (msleep) min-max (usleep_range) 1000 hz: 0:017 - 2:760s | 0:015 - 3:967s 0:014 - 0:418s 250 hz: 0:028 - 1:954s | 0:040 - 4:096s 0:016 - 0:816s This patch replaces the msleep() with usleep_range() calls in the i2c nuvoton driver with a consistent max range value. Signed-of-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: stable@vger.kernel.org (linux-4.8) Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-03-10 11:45:53 -07:00
usleep_range(TPM_I2C_RETRY_DELAY_SHORT,
TPM_I2C_RETRY_DELAY_SHORT
+ TPM_I2C_DELAY_RANGE);
else
tpm: msleep() delays - replace with usleep_range() in i2c nuvoton driver Commit 500462a9de65 "timers: Switch to a non-cascading wheel" replaced the 'classic' timer wheel, which aimed for near 'exact' expiry of the timers. Their analysis was that the vast majority of timeout timers are used as safeguards, not as real timers, and are cancelled or rearmed before expiration. The only exception noted to this were networking timers with a small expiry time. Not included in the analysis was the TPM polling timer, which resulted in a longer normal delay and, every so often, a very long delay. The non-cascading wheel delay is based on CONFIG_HZ. For a description of the different rings and their delays, refer to the comments in kernel/time/timer.c. Below are the delays given for rings 0 - 2, which explains the longer "normal" delays and the very, long delays as seen on systems with CONFIG_HZ 250. * HZ 1000 steps * Level Offset Granularity Range * 0 0 1 ms 0 ms - 63 ms * 1 64 8 ms 64 ms - 511 ms * 2 128 64 ms 512 ms - 4095 ms (512ms - ~4s) * HZ 250 * Level Offset Granularity Range * 0 0 4 ms 0 ms - 255 ms * 1 64 32 ms 256 ms - 2047 ms (256ms - ~2s) * 2 128 256 ms 2048 ms - 16383 ms (~2s - ~16s) Below is a comparison of extending the TPM with 1000 measurements, using msleep() vs. usleep_delay() when configured for 1000 hz vs. 250 hz, before and after commit 500462a9de65. linux-4.7 | msleep() usleep_range() 1000 hz: 0m44.628s | 1m34.497s 29.243s 250 hz: 1m28.510s | 4m49.269s 32.386s linux-4.7 | min-max (msleep) min-max (usleep_range) 1000 hz: 0:017 - 2:760s | 0:015 - 3:967s 0:014 - 0:418s 250 hz: 0:028 - 1:954s | 0:040 - 4:096s 0:016 - 0:816s This patch replaces the msleep() with usleep_range() calls in the i2c nuvoton driver with a consistent max range value. Signed-of-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: stable@vger.kernel.org (linux-4.8) Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-03-10 11:45:53 -07:00
usleep_range(TPM_I2C_RETRY_DELAY_LONG,
TPM_I2C_RETRY_DELAY_LONG
+ TPM_I2C_DELAY_RANGE);
status_valid = i2c_nuvoton_check_status(chip, mask,
value);
if (status_valid)
return 0;
} while (time_before(jiffies, stop));
}
dev_err(&chip->dev, "%s(%02x, %02x) -> timeout\n", __func__, mask,
value);
return -ETIMEDOUT;
}
/* wait for dataAvail field to be set in the TPM_STS register */
static int i2c_nuvoton_wait_for_data_avail(struct tpm_chip *chip, u32 timeout,
wait_queue_head_t *queue)
{
return i2c_nuvoton_wait_for_stat(chip,
TPM_STS_DATA_AVAIL | TPM_STS_VALID,
TPM_STS_DATA_AVAIL | TPM_STS_VALID,
timeout, queue);
}
/* Read @count bytes into @buf from TPM_RD_FIFO register */
static int i2c_nuvoton_recv_data(struct i2c_client *client,
struct tpm_chip *chip, u8 *buf, size_t count)
{
struct priv_data *priv = dev_get_drvdata(&chip->dev);
s32 rc;
int burst_count, bytes2read, size = 0;
while (size < count &&
i2c_nuvoton_wait_for_data_avail(chip,
chip->timeout_c,
&priv->read_queue) == 0) {
burst_count = i2c_nuvoton_get_burstcount(client, chip);
if (burst_count < 0) {
dev_err(&chip->dev,
"%s() fail to read burstCount=%d\n", __func__,
burst_count);
return -EIO;
}
bytes2read = min_t(size_t, burst_count, count - size);
rc = i2c_nuvoton_read_buf(client, TPM_DATA_FIFO_R,
bytes2read, &buf[size]);
if (rc < 0) {
dev_err(&chip->dev,
"%s() fail on i2c_nuvoton_read_buf()=%d\n",
__func__, rc);
return -EIO;
}
dev_dbg(&chip->dev, "%s(%d):", __func__, bytes2read);
size += bytes2read;
}
return size;
}
/* Read TPM command results */
static int i2c_nuvoton_recv(struct tpm_chip *chip, u8 *buf, size_t count)
{
struct priv_data *priv = dev_get_drvdata(&chip->dev);
struct device *dev = chip->dev.parent;
struct i2c_client *client = to_i2c_client(dev);
s32 rc;
int status;
int burst_count;
int retries;
int size = 0;
u32 expected;
if (count < TPM_HEADER_SIZE) {
i2c_nuvoton_ready(chip); /* return to idle */
dev_err(dev, "%s() count < header size\n", __func__);
return -EIO;
}
for (retries = 0; retries < TPM_I2C_RETRIES; retries++) {
if (retries > 0) {
/* if this is not the first trial, set responseRetry */
i2c_nuvoton_write_status(client,
TPM_STS_RESPONSE_RETRY);
}
/*
* read first available (> 10 bytes), including:
* tag, paramsize, and result
*/
status = i2c_nuvoton_wait_for_data_avail(
chip, chip->timeout_c, &priv->read_queue);
if (status != 0) {
dev_err(dev, "%s() timeout on dataAvail\n", __func__);
size = -ETIMEDOUT;
continue;
}
burst_count = i2c_nuvoton_get_burstcount(client, chip);
if (burst_count < 0) {
dev_err(dev, "%s() fail to get burstCount\n", __func__);
size = -EIO;
continue;
}
size = i2c_nuvoton_recv_data(client, chip, buf,
burst_count);
if (size < TPM_HEADER_SIZE) {
dev_err(dev, "%s() fail to read header\n", __func__);
size = -EIO;
continue;
}
/*
* convert number of expected bytes field from big endian 32 bit
* to machine native
*/
expected = be32_to_cpu(*(__be32 *) (buf + 2));
if (expected > count || expected < size) {
dev_err(dev, "%s() expected > count\n", __func__);
size = -EIO;
continue;
}
rc = i2c_nuvoton_recv_data(client, chip, &buf[size],
expected - size);
size += rc;
if (rc < 0 || size < expected) {
dev_err(dev, "%s() fail to read remainder of result\n",
__func__);
size = -EIO;
continue;
}
if (i2c_nuvoton_wait_for_stat(
chip, TPM_STS_VALID | TPM_STS_DATA_AVAIL,
TPM_STS_VALID, chip->timeout_c,
NULL)) {
dev_err(dev, "%s() error left over data\n", __func__);
size = -ETIMEDOUT;
continue;
}
break;
}
i2c_nuvoton_ready(chip);
dev_dbg(&chip->dev, "%s() -> %d\n", __func__, size);
return size;
}
/*
* Send TPM command.
*
* If interrupts are used (signaled by an irq set in the vendor structure)
* tpm.c can skip polling for the data to be available as the interrupt is
* waited for here
*/
static int i2c_nuvoton_send(struct tpm_chip *chip, u8 *buf, size_t len)
{
struct priv_data *priv = dev_get_drvdata(&chip->dev);
struct device *dev = chip->dev.parent;
struct i2c_client *client = to_i2c_client(dev);
u32 ordinal;
unsigned long duration;
size_t count = 0;
int burst_count, bytes2write, retries, rc = -EIO;
for (retries = 0; retries < TPM_RETRY; retries++) {
i2c_nuvoton_ready(chip);
if (i2c_nuvoton_wait_for_stat(chip, TPM_STS_COMMAND_READY,
TPM_STS_COMMAND_READY,
chip->timeout_b, NULL)) {
dev_err(dev, "%s() timeout on commandReady\n",
__func__);
rc = -EIO;
continue;
}
rc = 0;
while (count < len - 1) {
burst_count = i2c_nuvoton_get_burstcount(client,
chip);
if (burst_count < 0) {
dev_err(dev, "%s() fail get burstCount\n",
__func__);
rc = -EIO;
break;
}
bytes2write = min_t(size_t, burst_count,
len - 1 - count);
rc = i2c_nuvoton_write_buf(client, TPM_DATA_FIFO_W,
bytes2write, &buf[count]);
if (rc < 0) {
dev_err(dev, "%s() fail i2cWriteBuf\n",
__func__);
break;
}
dev_dbg(dev, "%s(%d):", __func__, bytes2write);
count += bytes2write;
rc = i2c_nuvoton_wait_for_stat(chip,
TPM_STS_VALID |
TPM_STS_EXPECT,
TPM_STS_VALID |
TPM_STS_EXPECT,
chip->timeout_c,
NULL);
if (rc < 0) {
dev_err(dev, "%s() timeout on Expect\n",
__func__);
rc = -ETIMEDOUT;
break;
}
}
if (rc < 0)
continue;
/* write last byte */
rc = i2c_nuvoton_write_buf(client, TPM_DATA_FIFO_W, 1,
&buf[count]);
if (rc < 0) {
dev_err(dev, "%s() fail to write last byte\n",
__func__);
rc = -EIO;
continue;
}
dev_dbg(dev, "%s(last): %02x", __func__, buf[count]);
rc = i2c_nuvoton_wait_for_stat(chip,
TPM_STS_VALID | TPM_STS_EXPECT,
TPM_STS_VALID,
chip->timeout_c, NULL);
if (rc) {
dev_err(dev, "%s() timeout on Expect to clear\n",
__func__);
rc = -ETIMEDOUT;
continue;
}
break;
}
if (rc < 0) {
/* retries == TPM_RETRY */
i2c_nuvoton_ready(chip);
return rc;
}
/* execute the TPM command */
rc = i2c_nuvoton_write_status(client, TPM_STS_GO);
if (rc < 0) {
dev_err(dev, "%s() fail to write Go\n", __func__);
i2c_nuvoton_ready(chip);
return rc;
}
ordinal = be32_to_cpu(*((__be32 *) (buf + 6)));
duration = tpm_calc_ordinal_duration(chip, ordinal);
rc = i2c_nuvoton_wait_for_data_avail(chip, duration, &priv->read_queue);
if (rc) {
dev_err(dev, "%s() timeout command duration %ld\n",
__func__, duration);
i2c_nuvoton_ready(chip);
return rc;
}
dev_dbg(dev, "%s() -> %zd\n", __func__, len);
return 0;
}
static bool i2c_nuvoton_req_canceled(struct tpm_chip *chip, u8 status)
{
return (status == TPM_STS_COMMAND_READY);
}
static const struct tpm_class_ops tpm_i2c = {
.flags = TPM_OPS_AUTO_STARTUP,
.status = i2c_nuvoton_read_status,
.recv = i2c_nuvoton_recv,
.send = i2c_nuvoton_send,
.cancel = i2c_nuvoton_ready,
.req_complete_mask = TPM_STS_DATA_AVAIL | TPM_STS_VALID,
.req_complete_val = TPM_STS_DATA_AVAIL | TPM_STS_VALID,
.req_canceled = i2c_nuvoton_req_canceled,
};
/* The only purpose for the handler is to signal to any waiting threads that
* the interrupt is currently being asserted. The driver does not do any
* processing triggered by interrupts, and the chip provides no way to mask at
* the source (plus that would be slow over I2C). Run the IRQ as a one-shot,
* this means it cannot be shared. */
static irqreturn_t i2c_nuvoton_int_handler(int dummy, void *dev_id)
{
struct tpm_chip *chip = dev_id;
struct priv_data *priv = dev_get_drvdata(&chip->dev);
priv->intrs++;
wake_up(&priv->read_queue);
disable_irq_nosync(priv->irq);
return IRQ_HANDLED;
}
static int get_vid(struct i2c_client *client, u32 *res)
{
static const u8 vid_did_rid_value[] = { 0x50, 0x10, 0xfe };
u32 temp;
s32 rc;
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
rc = i2c_nuvoton_read_buf(client, TPM_VID_DID_RID, 4, (u8 *)&temp);
if (rc < 0)
return rc;
/* check WPCT301 values - ignore RID */
if (memcmp(&temp, vid_did_rid_value, sizeof(vid_did_rid_value))) {
/*
* f/w rev 2.81 has an issue where the VID_DID_RID is not
* reporting the right value. so give it another chance at
* offset 0x20 (FIFO_W).
*/
rc = i2c_nuvoton_read_buf(client, TPM_DATA_FIFO_W, 4,
(u8 *) (&temp));
if (rc < 0)
return rc;
/* check WPCT301 values - ignore RID */
if (memcmp(&temp, vid_did_rid_value,
sizeof(vid_did_rid_value)))
return -ENODEV;
}
*res = temp;
return 0;
}
static int i2c_nuvoton_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
int rc;
struct tpm_chip *chip;
struct device *dev = &client->dev;
struct priv_data *priv;
u32 vid = 0;
rc = get_vid(client, &vid);
if (rc)
return rc;
dev_info(dev, "VID: %04X DID: %02X RID: %02X\n", (u16) vid,
(u8) (vid >> 16), (u8) (vid >> 24));
chip = tpmm_chip_alloc(dev, &tpm_i2c);
if (IS_ERR(chip))
return PTR_ERR(chip);
priv = devm_kzalloc(dev, sizeof(struct priv_data), GFP_KERNEL);
if (!priv)
return -ENOMEM;
if (dev->of_node) {
const struct of_device_id *of_id;
of_id = of_match_device(dev->driver->of_match_table, dev);
if (of_id && of_id->data == OF_IS_TPM2)
chip->flags |= TPM_CHIP_FLAG_TPM2;
} else
if (id->driver_data == I2C_IS_TPM2)
chip->flags |= TPM_CHIP_FLAG_TPM2;
init_waitqueue_head(&priv->read_queue);
/* Default timeouts */
chip->timeout_a = msecs_to_jiffies(TPM_I2C_SHORT_TIMEOUT);
chip->timeout_b = msecs_to_jiffies(TPM_I2C_LONG_TIMEOUT);
chip->timeout_c = msecs_to_jiffies(TPM_I2C_SHORT_TIMEOUT);
chip->timeout_d = msecs_to_jiffies(TPM_I2C_SHORT_TIMEOUT);
dev_set_drvdata(&chip->dev, priv);
/*
* I2C intfcaps (interrupt capabilitieis) in the chip are hard coded to:
* TPM_INTF_INT_LEVEL_LOW | TPM_INTF_DATA_AVAIL_INT
* The IRQ should be set in the i2c_board_info (which is done
* automatically in of_i2c_register_devices, for device tree users */
priv->irq = client->irq;
if (client->irq) {
dev_dbg(dev, "%s() priv->irq\n", __func__);
rc = devm_request_irq(dev, client->irq,
i2c_nuvoton_int_handler,
IRQF_TRIGGER_LOW,
dev_name(&chip->dev),
chip);
if (rc) {
dev_err(dev, "%s() Unable to request irq: %d for use\n",
__func__, priv->irq);
priv->irq = 0;
} else {
chip->flags |= TPM_CHIP_FLAG_IRQ;
/* Clear any pending interrupt */
i2c_nuvoton_ready(chip);
/* - wait for TPM_STS==0xA0 (stsValid, commandReady) */
rc = i2c_nuvoton_wait_for_stat(chip,
TPM_STS_COMMAND_READY,
TPM_STS_COMMAND_READY,
chip->timeout_b,
NULL);
if (rc == 0) {
/*
* TIS is in ready state
* write dummy byte to enter reception state
* TPM_DATA_FIFO_W <- rc (0)
*/
rc = i2c_nuvoton_write_buf(client,
TPM_DATA_FIFO_W,
1, (u8 *) (&rc));
if (rc < 0)
return rc;
/* TPM_STS <- 0x40 (commandReady) */
i2c_nuvoton_ready(chip);
} else {
/*
* timeout_b reached - command was
* aborted. TIS should now be in idle state -
* only TPM_STS_VALID should be set
*/
if (i2c_nuvoton_read_status(chip) !=
TPM_STS_VALID)
return -EIO;
}
}
}
return tpm_chip_register(chip);
}
static int i2c_nuvoton_remove(struct i2c_client *client)
{
struct tpm_chip *chip = i2c_get_clientdata(client);
tpm_chip_unregister(chip);
return 0;
}
static const struct i2c_device_id i2c_nuvoton_id[] = {
{"tpm_i2c_nuvoton"},
{"tpm2_i2c_nuvoton", .driver_data = I2C_IS_TPM2},
{}
};
MODULE_DEVICE_TABLE(i2c, i2c_nuvoton_id);
#ifdef CONFIG_OF
static const struct of_device_id i2c_nuvoton_of_match[] = {
{.compatible = "nuvoton,npct501"},
{.compatible = "winbond,wpct301"},
{.compatible = "nuvoton,npct601", .data = OF_IS_TPM2},
{},
};
MODULE_DEVICE_TABLE(of, i2c_nuvoton_of_match);
#endif
static SIMPLE_DEV_PM_OPS(i2c_nuvoton_pm_ops, tpm_pm_suspend, tpm_pm_resume);
static struct i2c_driver i2c_nuvoton_driver = {
.id_table = i2c_nuvoton_id,
.probe = i2c_nuvoton_probe,
.remove = i2c_nuvoton_remove,
.driver = {
.name = "tpm_i2c_nuvoton",
.pm = &i2c_nuvoton_pm_ops,
.of_match_table = of_match_ptr(i2c_nuvoton_of_match),
},
};
module_i2c_driver(i2c_nuvoton_driver);
MODULE_AUTHOR("Dan Morav (dan.morav@nuvoton.com)");
MODULE_DESCRIPTION("Nuvoton TPM I2C Driver");
MODULE_LICENSE("GPL");