2007-05-06 15:50:32 -06:00
|
|
|
/*
|
|
|
|
* Blackfin On-Chip Real Time Clock Driver
|
2009-06-30 12:41:43 -06:00
|
|
|
* Supports BF51x/BF52x/BF53[123]/BF53[467]/BF54x
|
2007-05-06 15:50:32 -06:00
|
|
|
*
|
2010-10-27 16:33:04 -06:00
|
|
|
* Copyright 2004-2010 Analog Devices Inc.
|
2007-05-06 15:50:32 -06:00
|
|
|
*
|
|
|
|
* Enter bugs at http://blackfin.uclinux.org/
|
|
|
|
*
|
|
|
|
* Licensed under the GPL-2 or later.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/* The biggest issue we deal with in this driver is that register writes are
|
|
|
|
* synced to the RTC frequency of 1Hz. So if you write to a register and
|
|
|
|
* attempt to write again before the first write has completed, the new write
|
|
|
|
* is simply discarded. This can easily be troublesome if userspace disables
|
|
|
|
* one event (say periodic) and then right after enables an event (say alarm).
|
|
|
|
* Since all events are maintained in the same interrupt mask register, if
|
|
|
|
* we wrote to it to disable the first event and then wrote to it again to
|
|
|
|
* enable the second event, that second event would not be enabled as the
|
|
|
|
* write would be discarded and things quickly fall apart.
|
|
|
|
*
|
|
|
|
* To keep this delay from significantly degrading performance (we, in theory,
|
2011-03-30 19:57:33 -06:00
|
|
|
* would have to sleep for up to 1 second every time we wanted to write a
|
2007-05-06 15:50:32 -06:00
|
|
|
* register), we only check the write pending status before we start to issue
|
2011-03-30 19:57:33 -06:00
|
|
|
* a new write. We bank on the idea that it doesn't matter when the sync
|
2007-05-06 15:50:32 -06:00
|
|
|
* happens so long as we don't attempt another write before it does. The only
|
|
|
|
* time userspace would take this penalty is when they try and do multiple
|
|
|
|
* operations right after another ... but in this case, they need to take the
|
|
|
|
* sync penalty, so we should be OK.
|
|
|
|
*
|
|
|
|
* Also note that the RTC_ISTAT register does not suffer this penalty; its
|
|
|
|
* writes to clear status registers complete immediately.
|
|
|
|
*/
|
|
|
|
|
2008-08-05 14:01:21 -06:00
|
|
|
/* It may seem odd that there is no SWCNT code in here (which would be exposed
|
|
|
|
* via the periodic interrupt event, or PIE). Since the Blackfin RTC peripheral
|
|
|
|
* runs in units of seconds (N/HZ) but the Linux framework runs in units of HZ
|
|
|
|
* (2^N HZ), there is no point in keeping code that only provides 1 HZ PIEs.
|
|
|
|
* The same exact behavior can be accomplished by using the update interrupt
|
|
|
|
* event (UIE). Maybe down the line the RTC peripheral will suck less in which
|
|
|
|
* case we can re-introduce PIE support.
|
|
|
|
*/
|
|
|
|
|
2007-05-06 15:50:32 -06:00
|
|
|
#include <linux/bcd.h>
|
2008-02-06 02:38:51 -07:00
|
|
|
#include <linux/completion.h>
|
|
|
|
#include <linux/delay.h>
|
2007-05-06 15:50:32 -06:00
|
|
|
#include <linux/init.h>
|
2008-02-06 02:38:51 -07:00
|
|
|
#include <linux/interrupt.h>
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/module.h>
|
2007-05-06 15:50:32 -06:00
|
|
|
#include <linux/platform_device.h>
|
2008-02-06 02:38:51 -07:00
|
|
|
#include <linux/rtc.h>
|
2007-05-06 15:50:32 -06:00
|
|
|
#include <linux/seq_file.h>
|
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 02:04:11 -06:00
|
|
|
#include <linux/slab.h>
|
2007-05-06 15:50:32 -06:00
|
|
|
|
|
|
|
#include <asm/blackfin.h>
|
|
|
|
|
2008-02-06 02:38:49 -07:00
|
|
|
#define dev_dbg_stamp(dev) dev_dbg(dev, "%s:%i: here i am\n", __func__, __LINE__)
|
2007-05-06 15:50:32 -06:00
|
|
|
|
|
|
|
struct bfin_rtc {
|
|
|
|
struct rtc_device *rtc_dev;
|
|
|
|
struct rtc_time rtc_alarm;
|
2008-02-06 02:38:51 -07:00
|
|
|
u16 rtc_wrote_regs;
|
2007-05-06 15:50:32 -06:00
|
|
|
};
|
|
|
|
|
|
|
|
/* Bit values for the ISTAT / ICTL registers */
|
|
|
|
#define RTC_ISTAT_WRITE_COMPLETE 0x8000
|
|
|
|
#define RTC_ISTAT_WRITE_PENDING 0x4000
|
|
|
|
#define RTC_ISTAT_ALARM_DAY 0x0040
|
|
|
|
#define RTC_ISTAT_24HR 0x0020
|
|
|
|
#define RTC_ISTAT_HOUR 0x0010
|
|
|
|
#define RTC_ISTAT_MIN 0x0008
|
|
|
|
#define RTC_ISTAT_SEC 0x0004
|
|
|
|
#define RTC_ISTAT_ALARM 0x0002
|
|
|
|
#define RTC_ISTAT_STOPWATCH 0x0001
|
|
|
|
|
|
|
|
/* Shift values for RTC_STAT register */
|
|
|
|
#define DAY_BITS_OFF 17
|
|
|
|
#define HOUR_BITS_OFF 12
|
|
|
|
#define MIN_BITS_OFF 6
|
|
|
|
#define SEC_BITS_OFF 0
|
|
|
|
|
|
|
|
/* Some helper functions to convert between the common RTC notion of time
|
2008-02-06 02:38:47 -07:00
|
|
|
* and the internal Blackfin notion that is encoded in 32bits.
|
2007-05-06 15:50:32 -06:00
|
|
|
*/
|
|
|
|
static inline u32 rtc_time_to_bfin(unsigned long now)
|
|
|
|
{
|
|
|
|
u32 sec = (now % 60);
|
|
|
|
u32 min = (now % (60 * 60)) / 60;
|
|
|
|
u32 hour = (now % (60 * 60 * 24)) / (60 * 60);
|
|
|
|
u32 days = (now / (60 * 60 * 24));
|
|
|
|
return (sec << SEC_BITS_OFF) +
|
|
|
|
(min << MIN_BITS_OFF) +
|
|
|
|
(hour << HOUR_BITS_OFF) +
|
|
|
|
(days << DAY_BITS_OFF);
|
|
|
|
}
|
|
|
|
static inline unsigned long rtc_bfin_to_time(u32 rtc_bfin)
|
|
|
|
{
|
|
|
|
return (((rtc_bfin >> SEC_BITS_OFF) & 0x003F)) +
|
|
|
|
(((rtc_bfin >> MIN_BITS_OFF) & 0x003F) * 60) +
|
|
|
|
(((rtc_bfin >> HOUR_BITS_OFF) & 0x001F) * 60 * 60) +
|
|
|
|
(((rtc_bfin >> DAY_BITS_OFF) & 0x7FFF) * 60 * 60 * 24);
|
|
|
|
}
|
|
|
|
static inline void rtc_bfin_to_tm(u32 rtc_bfin, struct rtc_time *tm)
|
|
|
|
{
|
|
|
|
rtc_time_to_tm(rtc_bfin_to_time(rtc_bfin), tm);
|
|
|
|
}
|
|
|
|
|
2008-02-06 02:38:51 -07:00
|
|
|
/**
|
|
|
|
* bfin_rtc_sync_pending - make sure pending writes have complete
|
|
|
|
*
|
|
|
|
* Wait for the previous write to a RTC register to complete.
|
2007-05-06 15:50:32 -06:00
|
|
|
* Unfortunately, we can't sleep here as that introduces a race condition when
|
|
|
|
* turning on interrupt events. Consider this:
|
|
|
|
* - process sets alarm
|
|
|
|
* - process enables alarm
|
|
|
|
* - process sleeps while waiting for rtc write to sync
|
|
|
|
* - interrupt fires while process is sleeping
|
|
|
|
* - interrupt acks the event by writing to ISTAT
|
|
|
|
* - interrupt sets the WRITE PENDING bit
|
|
|
|
* - interrupt handler finishes
|
|
|
|
* - process wakes up, sees WRITE PENDING bit set, goes to sleep
|
|
|
|
* - interrupt fires while process is sleeping
|
|
|
|
* If anyone can point out the obvious solution here, i'm listening :). This
|
|
|
|
* shouldn't be an issue on an SMP or preempt system as this function should
|
|
|
|
* only be called with the rtc lock held.
|
2008-02-06 02:38:47 -07:00
|
|
|
*
|
|
|
|
* Other options:
|
|
|
|
* - disable PREN so the sync happens at 32.768kHZ ... but this changes the
|
|
|
|
* inc rate for all RTC registers from 1HZ to 32.768kHZ ...
|
|
|
|
* - use the write complete IRQ
|
2007-05-06 15:50:32 -06:00
|
|
|
*/
|
2008-02-06 02:38:51 -07:00
|
|
|
/*
|
|
|
|
static void bfin_rtc_sync_pending_polled(void)
|
2007-05-06 15:50:32 -06:00
|
|
|
{
|
2008-02-06 02:38:51 -07:00
|
|
|
while (!(bfin_read_RTC_ISTAT() & RTC_ISTAT_WRITE_COMPLETE))
|
2007-05-06 15:50:32 -06:00
|
|
|
if (!(bfin_read_RTC_ISTAT() & RTC_ISTAT_WRITE_PENDING))
|
|
|
|
break;
|
|
|
|
bfin_write_RTC_ISTAT(RTC_ISTAT_WRITE_COMPLETE);
|
|
|
|
}
|
2008-02-06 02:38:51 -07:00
|
|
|
*/
|
|
|
|
static DECLARE_COMPLETION(bfin_write_complete);
|
|
|
|
static void bfin_rtc_sync_pending(struct device *dev)
|
|
|
|
{
|
|
|
|
dev_dbg_stamp(dev);
|
|
|
|
while (bfin_read_RTC_ISTAT() & RTC_ISTAT_WRITE_PENDING)
|
|
|
|
wait_for_completion_timeout(&bfin_write_complete, HZ * 5);
|
|
|
|
dev_dbg_stamp(dev);
|
|
|
|
}
|
2007-05-06 15:50:32 -06:00
|
|
|
|
2008-02-06 02:38:51 -07:00
|
|
|
/**
|
|
|
|
* bfin_rtc_reset - set RTC to sane/known state
|
|
|
|
*
|
|
|
|
* Initialize the RTC. Enable pre-scaler to scale RTC clock
|
|
|
|
* to 1Hz and clear interrupt/status registers.
|
|
|
|
*/
|
2008-08-05 14:01:19 -06:00
|
|
|
static void bfin_rtc_reset(struct device *dev, u16 rtc_ictl)
|
2007-05-06 15:50:32 -06:00
|
|
|
{
|
2008-02-06 02:38:49 -07:00
|
|
|
struct bfin_rtc *rtc = dev_get_drvdata(dev);
|
2008-02-06 02:38:51 -07:00
|
|
|
dev_dbg_stamp(dev);
|
|
|
|
bfin_rtc_sync_pending(dev);
|
2007-05-06 15:50:32 -06:00
|
|
|
bfin_write_RTC_PREN(0x1);
|
2008-08-05 14:01:19 -06:00
|
|
|
bfin_write_RTC_ICTL(rtc_ictl);
|
2007-05-06 15:50:32 -06:00
|
|
|
bfin_write_RTC_ALARM(0);
|
|
|
|
bfin_write_RTC_ISTAT(0xFFFF);
|
2008-02-06 02:38:51 -07:00
|
|
|
rtc->rtc_wrote_regs = 0;
|
2007-05-06 15:50:32 -06:00
|
|
|
}
|
|
|
|
|
2008-02-06 02:38:51 -07:00
|
|
|
/**
|
|
|
|
* bfin_rtc_interrupt - handle interrupt from RTC
|
|
|
|
*
|
|
|
|
* Since we handle all RTC events here, we have to make sure the requested
|
|
|
|
* interrupt is enabled (in RTC_ICTL) as the event status register (RTC_ISTAT)
|
|
|
|
* always gets updated regardless of the interrupt being enabled. So when one
|
|
|
|
* even we care about (e.g. stopwatch) goes off, we don't want to turn around
|
|
|
|
* and say that other events have happened as well (e.g. second). We do not
|
|
|
|
* have to worry about pending writes to the RTC_ICTL register as interrupts
|
|
|
|
* only fire if they are enabled in the RTC_ICTL register.
|
|
|
|
*/
|
2007-05-06 15:50:32 -06:00
|
|
|
static irqreturn_t bfin_rtc_interrupt(int irq, void *dev_id)
|
|
|
|
{
|
2008-02-06 02:38:47 -07:00
|
|
|
struct device *dev = dev_id;
|
|
|
|
struct bfin_rtc *rtc = dev_get_drvdata(dev);
|
2007-05-06 15:50:32 -06:00
|
|
|
unsigned long events = 0;
|
2008-02-06 02:38:51 -07:00
|
|
|
bool write_complete = false;
|
2010-10-27 16:33:03 -06:00
|
|
|
u16 rtc_istat, rtc_istat_clear, rtc_ictl, bits;
|
2007-05-06 15:50:32 -06:00
|
|
|
|
2008-02-06 02:38:49 -07:00
|
|
|
dev_dbg_stamp(dev);
|
2007-05-06 15:50:32 -06:00
|
|
|
|
|
|
|
rtc_istat = bfin_read_RTC_ISTAT();
|
2008-02-06 02:38:51 -07:00
|
|
|
rtc_ictl = bfin_read_RTC_ICTL();
|
2010-10-27 16:33:03 -06:00
|
|
|
rtc_istat_clear = 0;
|
2007-05-06 15:50:32 -06:00
|
|
|
|
2010-10-27 16:33:03 -06:00
|
|
|
bits = RTC_ISTAT_WRITE_COMPLETE;
|
|
|
|
if (rtc_istat & bits) {
|
|
|
|
rtc_istat_clear |= bits;
|
2008-02-06 02:38:51 -07:00
|
|
|
write_complete = true;
|
|
|
|
complete(&bfin_write_complete);
|
2007-05-06 15:50:32 -06:00
|
|
|
}
|
|
|
|
|
2010-10-27 16:33:03 -06:00
|
|
|
bits = (RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY);
|
|
|
|
if (rtc_ictl & bits) {
|
|
|
|
if (rtc_istat & bits) {
|
|
|
|
rtc_istat_clear |= bits;
|
2008-02-06 02:38:51 -07:00
|
|
|
events |= RTC_AF | RTC_IRQF;
|
|
|
|
}
|
2007-05-06 15:50:32 -06:00
|
|
|
}
|
|
|
|
|
2010-10-27 16:33:03 -06:00
|
|
|
bits = RTC_ISTAT_SEC;
|
|
|
|
if (rtc_ictl & bits) {
|
|
|
|
if (rtc_istat & bits) {
|
|
|
|
rtc_istat_clear |= bits;
|
2008-02-06 02:38:51 -07:00
|
|
|
events |= RTC_UF | RTC_IRQF;
|
|
|
|
}
|
|
|
|
}
|
2007-05-06 15:50:32 -06:00
|
|
|
|
2008-02-06 02:38:51 -07:00
|
|
|
if (events)
|
|
|
|
rtc_update_irq(rtc->rtc_dev, 1, events);
|
2007-05-06 15:50:32 -06:00
|
|
|
|
2010-10-27 16:33:03 -06:00
|
|
|
if (write_complete || events) {
|
|
|
|
bfin_write_RTC_ISTAT(rtc_istat_clear);
|
2008-02-06 02:38:51 -07:00
|
|
|
return IRQ_HANDLED;
|
2010-10-27 16:33:03 -06:00
|
|
|
} else
|
2008-02-06 02:38:51 -07:00
|
|
|
return IRQ_NONE;
|
2007-05-06 15:50:32 -06:00
|
|
|
}
|
|
|
|
|
2008-08-05 14:01:18 -06:00
|
|
|
static void bfin_rtc_int_set(u16 rtc_int)
|
2008-02-06 02:38:51 -07:00
|
|
|
{
|
|
|
|
bfin_write_RTC_ISTAT(rtc_int);
|
|
|
|
bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() | rtc_int);
|
|
|
|
}
|
2008-08-05 14:01:18 -06:00
|
|
|
static void bfin_rtc_int_clear(u16 rtc_int)
|
2008-02-06 02:38:51 -07:00
|
|
|
{
|
|
|
|
bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() & rtc_int);
|
|
|
|
}
|
|
|
|
static void bfin_rtc_int_set_alarm(struct bfin_rtc *rtc)
|
|
|
|
{
|
|
|
|
/* Blackfin has different bits for whether the alarm is
|
|
|
|
* more than 24 hours away.
|
|
|
|
*/
|
2008-08-05 14:01:18 -06:00
|
|
|
bfin_rtc_int_set(rtc->rtc_alarm.tm_yday == -1 ? RTC_ISTAT_ALARM : RTC_ISTAT_ALARM_DAY);
|
2008-02-06 02:38:51 -07:00
|
|
|
}
|
2007-05-06 15:50:32 -06:00
|
|
|
|
2011-02-02 18:02:41 -07:00
|
|
|
static int bfin_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
|
|
|
|
{
|
|
|
|
struct bfin_rtc *rtc = dev_get_drvdata(dev);
|
|
|
|
|
|
|
|
dev_dbg_stamp(dev);
|
|
|
|
if (enabled)
|
|
|
|
bfin_rtc_int_set_alarm(rtc);
|
|
|
|
else
|
|
|
|
bfin_rtc_int_clear(~(RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY));
|
2011-03-18 02:26:24 -06:00
|
|
|
|
|
|
|
return 0;
|
2011-02-02 18:02:41 -07:00
|
|
|
}
|
|
|
|
|
2007-05-06 15:50:32 -06:00
|
|
|
static int bfin_rtc_read_time(struct device *dev, struct rtc_time *tm)
|
|
|
|
{
|
|
|
|
struct bfin_rtc *rtc = dev_get_drvdata(dev);
|
|
|
|
|
2008-02-06 02:38:49 -07:00
|
|
|
dev_dbg_stamp(dev);
|
2007-05-06 15:50:32 -06:00
|
|
|
|
2008-02-06 02:38:51 -07:00
|
|
|
if (rtc->rtc_wrote_regs & 0x1)
|
|
|
|
bfin_rtc_sync_pending(dev);
|
|
|
|
|
2007-05-06 15:50:32 -06:00
|
|
|
rtc_bfin_to_tm(bfin_read_RTC_STAT(), tm);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int bfin_rtc_set_time(struct device *dev, struct rtc_time *tm)
|
|
|
|
{
|
|
|
|
struct bfin_rtc *rtc = dev_get_drvdata(dev);
|
|
|
|
int ret;
|
|
|
|
unsigned long now;
|
|
|
|
|
2008-02-06 02:38:49 -07:00
|
|
|
dev_dbg_stamp(dev);
|
2007-05-06 15:50:32 -06:00
|
|
|
|
|
|
|
ret = rtc_tm_to_time(tm, &now);
|
|
|
|
if (ret == 0) {
|
2008-02-06 02:38:51 -07:00
|
|
|
if (rtc->rtc_wrote_regs & 0x1)
|
|
|
|
bfin_rtc_sync_pending(dev);
|
2007-05-06 15:50:32 -06:00
|
|
|
bfin_write_RTC_STAT(rtc_time_to_bfin(now));
|
2008-02-06 02:38:51 -07:00
|
|
|
rtc->rtc_wrote_regs = 0x1;
|
2007-05-06 15:50:32 -06:00
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int bfin_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
|
|
|
|
{
|
|
|
|
struct bfin_rtc *rtc = dev_get_drvdata(dev);
|
2008-02-06 02:38:49 -07:00
|
|
|
dev_dbg_stamp(dev);
|
2008-02-06 02:38:50 -07:00
|
|
|
alrm->time = rtc->rtc_alarm;
|
2008-02-06 02:38:51 -07:00
|
|
|
bfin_rtc_sync_pending(dev);
|
2008-02-06 02:38:49 -07:00
|
|
|
alrm->enabled = !!(bfin_read_RTC_ICTL() & (RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY));
|
2007-05-06 15:50:32 -06:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int bfin_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
|
|
|
|
{
|
|
|
|
struct bfin_rtc *rtc = dev_get_drvdata(dev);
|
2008-02-06 02:38:51 -07:00
|
|
|
unsigned long rtc_alarm;
|
|
|
|
|
2008-02-06 02:38:49 -07:00
|
|
|
dev_dbg_stamp(dev);
|
2008-02-06 02:38:51 -07:00
|
|
|
|
|
|
|
if (rtc_tm_to_time(&alrm->time, &rtc_alarm))
|
|
|
|
return -EINVAL;
|
|
|
|
|
2008-02-06 02:38:49 -07:00
|
|
|
rtc->rtc_alarm = alrm->time;
|
2008-02-06 02:38:51 -07:00
|
|
|
|
|
|
|
bfin_rtc_sync_pending(dev);
|
|
|
|
bfin_write_RTC_ALARM(rtc_time_to_bfin(rtc_alarm));
|
|
|
|
if (alrm->enabled)
|
|
|
|
bfin_rtc_int_set_alarm(rtc);
|
|
|
|
|
2007-05-06 15:50:32 -06:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int bfin_rtc_proc(struct device *dev, struct seq_file *seq)
|
|
|
|
{
|
2008-02-06 02:38:48 -07:00
|
|
|
#define yesno(x) ((x) ? "yes" : "no")
|
2007-05-06 15:50:32 -06:00
|
|
|
u16 ictl = bfin_read_RTC_ICTL();
|
2008-02-06 02:38:49 -07:00
|
|
|
dev_dbg_stamp(dev);
|
2008-02-06 02:38:48 -07:00
|
|
|
seq_printf(seq,
|
|
|
|
"alarm_IRQ\t: %s\n"
|
|
|
|
"wkalarm_IRQ\t: %s\n"
|
2008-08-05 14:01:21 -06:00
|
|
|
"seconds_IRQ\t: %s\n",
|
2008-02-06 02:38:48 -07:00
|
|
|
yesno(ictl & RTC_ISTAT_ALARM),
|
|
|
|
yesno(ictl & RTC_ISTAT_ALARM_DAY),
|
2008-08-05 14:01:21 -06:00
|
|
|
yesno(ictl & RTC_ISTAT_SEC));
|
2007-05-06 15:50:32 -06:00
|
|
|
return 0;
|
2008-02-06 02:38:48 -07:00
|
|
|
#undef yesno
|
2007-05-06 15:50:32 -06:00
|
|
|
}
|
|
|
|
|
|
|
|
static struct rtc_class_ops bfin_rtc_ops = {
|
|
|
|
.read_time = bfin_rtc_read_time,
|
|
|
|
.set_time = bfin_rtc_set_time,
|
|
|
|
.read_alarm = bfin_rtc_read_alarm,
|
|
|
|
.set_alarm = bfin_rtc_set_alarm,
|
|
|
|
.proc = bfin_rtc_proc,
|
2011-02-02 18:02:41 -07:00
|
|
|
.alarm_irq_enable = bfin_rtc_alarm_irq_enable,
|
2007-05-06 15:50:32 -06:00
|
|
|
};
|
|
|
|
|
2012-12-21 14:09:38 -07:00
|
|
|
static int bfin_rtc_probe(struct platform_device *pdev)
|
2007-05-06 15:50:32 -06:00
|
|
|
{
|
|
|
|
struct bfin_rtc *rtc;
|
2008-08-20 15:09:01 -06:00
|
|
|
struct device *dev = &pdev->dev;
|
2014-06-06 15:36:07 -06:00
|
|
|
int ret;
|
2009-06-30 12:41:43 -06:00
|
|
|
unsigned long timeout = jiffies + HZ;
|
2007-05-06 15:50:32 -06:00
|
|
|
|
2008-08-20 15:09:01 -06:00
|
|
|
dev_dbg_stamp(dev);
|
2007-05-06 15:50:32 -06:00
|
|
|
|
2008-08-20 15:09:01 -06:00
|
|
|
/* Allocate memory for our RTC struct */
|
2013-04-29 17:20:35 -06:00
|
|
|
rtc = devm_kzalloc(dev, sizeof(*rtc), GFP_KERNEL);
|
2007-05-06 15:50:32 -06:00
|
|
|
if (unlikely(!rtc))
|
|
|
|
return -ENOMEM;
|
2008-08-20 15:09:01 -06:00
|
|
|
platform_set_drvdata(pdev, rtc);
|
2008-08-20 15:09:02 -06:00
|
|
|
device_init_wakeup(dev, 1);
|
2007-05-06 15:50:32 -06:00
|
|
|
|
2009-06-30 12:41:43 -06:00
|
|
|
/* Register our RTC with the RTC framework */
|
2013-04-29 17:20:35 -06:00
|
|
|
rtc->rtc_dev = devm_rtc_device_register(dev, pdev->name, &bfin_rtc_ops,
|
2009-06-30 12:41:43 -06:00
|
|
|
THIS_MODULE);
|
2014-06-06 15:36:07 -06:00
|
|
|
if (unlikely(IS_ERR(rtc->rtc_dev)))
|
|
|
|
return PTR_ERR(rtc->rtc_dev);
|
2009-06-30 12:41:43 -06:00
|
|
|
|
2008-08-20 15:09:01 -06:00
|
|
|
/* Grab the IRQ and init the hardware */
|
2013-04-29 17:20:35 -06:00
|
|
|
ret = devm_request_irq(dev, IRQ_RTC, bfin_rtc_interrupt, 0,
|
|
|
|
pdev->name, dev);
|
2008-08-20 15:09:01 -06:00
|
|
|
if (unlikely(ret))
|
2014-06-06 15:36:07 -06:00
|
|
|
dev_err(&pdev->dev,
|
|
|
|
"unable to request IRQ; alarm won't work, "
|
|
|
|
"and writes will be delayed\n");
|
|
|
|
|
2008-08-20 15:09:03 -06:00
|
|
|
/* sometimes the bootloader touched things, but the write complete was not
|
|
|
|
* enabled, so let's just do a quick timeout here since the IRQ will not fire ...
|
|
|
|
*/
|
|
|
|
while (bfin_read_RTC_ISTAT() & RTC_ISTAT_WRITE_PENDING)
|
|
|
|
if (time_after(jiffies, timeout))
|
|
|
|
break;
|
2008-08-20 15:09:01 -06:00
|
|
|
bfin_rtc_reset(dev, RTC_ISTAT_WRITE_COMPLETE);
|
2008-08-05 14:01:21 -06:00
|
|
|
bfin_write_RTC_SWCNT(0);
|
2007-05-06 15:50:32 -06:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2012-12-21 14:09:38 -07:00
|
|
|
static int bfin_rtc_remove(struct platform_device *pdev)
|
2007-05-06 15:50:32 -06:00
|
|
|
{
|
2008-08-20 15:09:01 -06:00
|
|
|
struct device *dev = &pdev->dev;
|
2007-05-06 15:50:32 -06:00
|
|
|
|
2008-08-20 15:09:01 -06:00
|
|
|
bfin_rtc_reset(dev, 0);
|
2007-05-06 15:50:32 -06:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2013-04-29 17:20:59 -06:00
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
|
|
static int bfin_rtc_suspend(struct device *dev)
|
2008-08-05 14:01:17 -06:00
|
|
|
{
|
2010-10-27 16:33:04 -06:00
|
|
|
dev_dbg_stamp(dev);
|
|
|
|
|
|
|
|
if (device_may_wakeup(dev)) {
|
2008-08-05 14:01:18 -06:00
|
|
|
enable_irq_wake(IRQ_RTC);
|
2010-10-27 16:33:04 -06:00
|
|
|
bfin_rtc_sync_pending(dev);
|
2008-08-05 14:01:20 -06:00
|
|
|
} else
|
2010-09-09 17:37:27 -06:00
|
|
|
bfin_rtc_int_clear(0);
|
2008-08-05 14:01:18 -06:00
|
|
|
|
2008-08-05 14:01:17 -06:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2013-04-29 17:20:59 -06:00
|
|
|
static int bfin_rtc_resume(struct device *dev)
|
2008-08-05 14:01:17 -06:00
|
|
|
{
|
2010-10-27 16:33:04 -06:00
|
|
|
dev_dbg_stamp(dev);
|
|
|
|
|
|
|
|
if (device_may_wakeup(dev))
|
2008-08-05 14:01:18 -06:00
|
|
|
disable_irq_wake(IRQ_RTC);
|
2010-09-09 17:37:29 -06:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Since only some of the RTC bits are maintained externally in the
|
|
|
|
* Vbat domain, we need to wait for the RTC MMRs to be synced into
|
|
|
|
* the core after waking up. This happens every RTC 1HZ. Once that
|
|
|
|
* has happened, we can go ahead and re-enable the important write
|
|
|
|
* complete interrupt event.
|
|
|
|
*/
|
|
|
|
while (!(bfin_read_RTC_ISTAT() & RTC_ISTAT_SEC))
|
|
|
|
continue;
|
|
|
|
bfin_rtc_int_set(RTC_ISTAT_WRITE_COMPLETE);
|
2008-08-05 14:01:18 -06:00
|
|
|
|
2008-08-05 14:01:17 -06:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
2013-04-29 17:20:59 -06:00
|
|
|
static SIMPLE_DEV_PM_OPS(bfin_rtc_pm_ops, bfin_rtc_suspend, bfin_rtc_resume);
|
|
|
|
|
2007-05-06 15:50:32 -06:00
|
|
|
static struct platform_driver bfin_rtc_driver = {
|
|
|
|
.driver = {
|
|
|
|
.name = "rtc-bfin",
|
2013-04-29 17:20:59 -06:00
|
|
|
.pm = &bfin_rtc_pm_ops,
|
2007-05-06 15:50:32 -06:00
|
|
|
},
|
|
|
|
.probe = bfin_rtc_probe,
|
2012-12-21 14:09:38 -07:00
|
|
|
.remove = bfin_rtc_remove,
|
2007-05-06 15:50:32 -06:00
|
|
|
};
|
|
|
|
|
2012-01-10 16:10:48 -07:00
|
|
|
module_platform_driver(bfin_rtc_driver);
|
2007-05-06 15:50:32 -06:00
|
|
|
|
|
|
|
MODULE_DESCRIPTION("Blackfin On-Chip Real Time Clock Driver");
|
|
|
|
MODULE_AUTHOR("Mike Frysinger <vapier@gentoo.org>");
|
|
|
|
MODULE_LICENSE("GPL");
|
2008-04-10 22:29:25 -06:00
|
|
|
MODULE_ALIAS("platform:rtc-bfin");
|