2006-05-12 12:05:29 -06:00
|
|
|
/*
|
2009-10-28 03:43:25 -06:00
|
|
|
* Copyright (C) 2009 by Bart Hartgers (bart.hartgers+ark3116@gmail.com)
|
|
|
|
* Original version:
|
2006-07-18 09:00:52 -06:00
|
|
|
* Copyright (C) 2006
|
|
|
|
* Simon Schulz (ark3116_driver <at> auctionant.de)
|
|
|
|
*
|
2006-05-12 12:05:29 -06:00
|
|
|
* ark3116
|
|
|
|
* - implements a driver for the arkmicro ark3116 chipset (vendor=0x6547,
|
|
|
|
* productid=0x0232) (used in a datacable called KQ-U8A)
|
|
|
|
*
|
2009-10-28 03:43:25 -06:00
|
|
|
* Supports full modem status lines, break, hardware flow control. Does not
|
|
|
|
* support software flow control, since I do not know how to enable it in hw.
|
2006-05-12 12:05:29 -06:00
|
|
|
*
|
2009-10-28 03:43:25 -06:00
|
|
|
* This driver is a essentially new implementation. I initially dug
|
|
|
|
* into the old ark3116.c driver and suddenly realized the ark3116 is
|
|
|
|
* a 16450 with a USB interface glued to it. See comments at the
|
|
|
|
* bottom of this file.
|
2006-05-12 12:05:29 -06:00
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
|
|
* under the terms of the GNU General Public License as published by the
|
|
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
|
|
* option) any later version.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/init.h>
|
2009-10-28 03:43:25 -06:00
|
|
|
#include <linux/ioctl.h>
|
2006-05-12 12:05:29 -06:00
|
|
|
#include <linux/tty.h>
|
2009-10-28 03:43:25 -06:00
|
|
|
#include <linux/tty_flip.h>
|
2006-05-12 12:05:29 -06:00
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/usb.h>
|
2006-07-11 22:22:58 -06:00
|
|
|
#include <linux/usb/serial.h>
|
2006-07-18 09:00:52 -06:00
|
|
|
#include <linux/serial.h>
|
2009-10-28 03:43:25 -06:00
|
|
|
#include <linux/serial_reg.h>
|
2008-04-29 07:35:39 -06:00
|
|
|
#include <linux/uaccess.h>
|
2009-10-28 03:43:25 -06:00
|
|
|
#include <linux/mutex.h>
|
|
|
|
#include <linux/spinlock.h>
|
2006-05-12 12:05:29 -06:00
|
|
|
|
|
|
|
static int debug;
|
2009-10-28 03:43:25 -06:00
|
|
|
/*
|
|
|
|
* Version information
|
|
|
|
*/
|
|
|
|
|
|
|
|
#define DRIVER_VERSION "v0.5"
|
|
|
|
#define DRIVER_AUTHOR "Bart Hartgers <bart.hartgers+ark3116@gmail.com>"
|
|
|
|
#define DRIVER_DESC "USB ARK3116 serial/IrDA driver"
|
|
|
|
#define DRIVER_DEV_DESC "ARK3116 RS232/IrDA"
|
|
|
|
#define DRIVER_NAME "ark3116"
|
|
|
|
|
|
|
|
/* usb timeout of 1 second */
|
|
|
|
#define ARK_TIMEOUT (1*HZ)
|
2006-05-12 12:05:29 -06:00
|
|
|
|
|
|
|
static struct usb_device_id id_table [] = {
|
|
|
|
{ USB_DEVICE(0x6547, 0x0232) },
|
2009-08-06 17:09:52 -06:00
|
|
|
{ USB_DEVICE(0x18ec, 0x3118) }, /* USB to IrDA adapter */
|
2006-05-12 12:05:29 -06:00
|
|
|
{ },
|
|
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(usb, id_table);
|
|
|
|
|
2009-08-06 17:09:52 -06:00
|
|
|
static int is_irda(struct usb_serial *serial)
|
|
|
|
{
|
|
|
|
struct usb_device *dev = serial->dev;
|
|
|
|
if (le16_to_cpu(dev->descriptor.idVendor) == 0x18ec &&
|
|
|
|
le16_to_cpu(dev->descriptor.idProduct) == 0x3118)
|
|
|
|
return 1;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2009-10-28 03:43:25 -06:00
|
|
|
struct ark3116_private {
|
|
|
|
wait_queue_head_t delta_msr_wait;
|
|
|
|
struct async_icount icount;
|
|
|
|
int irda; /* 1 for irda device */
|
|
|
|
|
|
|
|
/* protects hw register updates */
|
|
|
|
struct mutex hw_lock;
|
|
|
|
|
|
|
|
int quot; /* baudrate divisor */
|
|
|
|
__u32 lcr; /* line control register value */
|
|
|
|
__u32 hcr; /* handshake control register (0x8)
|
|
|
|
* value */
|
|
|
|
__u32 mcr; /* modem contol register value */
|
|
|
|
|
|
|
|
/* protects the status values below */
|
|
|
|
spinlock_t status_lock;
|
|
|
|
__u32 msr; /* modem status register value */
|
|
|
|
__u32 lsr; /* line status register value */
|
|
|
|
};
|
|
|
|
|
|
|
|
static int ark3116_write_reg(struct usb_serial *serial,
|
|
|
|
unsigned reg, __u8 val)
|
|
|
|
{
|
|
|
|
int result;
|
|
|
|
/* 0xfe 0x40 are magic values taken from original driver */
|
|
|
|
result = usb_control_msg(serial->dev,
|
|
|
|
usb_sndctrlpipe(serial->dev, 0),
|
|
|
|
0xfe, 0x40, val, reg,
|
|
|
|
NULL, 0, ARK_TIMEOUT);
|
|
|
|
return result;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ark3116_read_reg(struct usb_serial *serial,
|
|
|
|
unsigned reg, unsigned char *buf)
|
|
|
|
{
|
|
|
|
int result;
|
|
|
|
/* 0xfe 0xc0 are magic values taken from original driver */
|
|
|
|
result = usb_control_msg(serial->dev,
|
|
|
|
usb_rcvctrlpipe(serial->dev, 0),
|
|
|
|
0xfe, 0xc0, 0, reg,
|
|
|
|
buf, 1, ARK_TIMEOUT);
|
|
|
|
if (result < 0)
|
|
|
|
return result;
|
|
|
|
else
|
|
|
|
return buf[0];
|
|
|
|
}
|
|
|
|
|
2006-05-12 12:05:29 -06:00
|
|
|
static inline void ARK3116_SND(struct usb_serial *serial, int seq,
|
|
|
|
__u8 request, __u8 requesttype,
|
|
|
|
__u16 value, __u16 index)
|
|
|
|
{
|
|
|
|
int result;
|
|
|
|
result = usb_control_msg(serial->dev,
|
2006-07-18 09:00:22 -06:00
|
|
|
usb_sndctrlpipe(serial->dev, 0),
|
2006-05-12 12:05:29 -06:00
|
|
|
request, requesttype, value, index,
|
2006-07-18 09:00:22 -06:00
|
|
|
NULL, 0x00, 1000);
|
|
|
|
dbg("%03d > ok", seq);
|
2006-05-12 12:05:29 -06:00
|
|
|
}
|
|
|
|
|
|
|
|
static inline void ARK3116_RCV(struct usb_serial *serial, int seq,
|
|
|
|
__u8 request, __u8 requesttype,
|
|
|
|
__u16 value, __u16 index, __u8 expected,
|
|
|
|
char *buf)
|
|
|
|
{
|
|
|
|
int result;
|
|
|
|
result = usb_control_msg(serial->dev,
|
2006-07-18 09:00:22 -06:00
|
|
|
usb_rcvctrlpipe(serial->dev, 0),
|
|
|
|
request, requesttype, value, index,
|
|
|
|
buf, 0x0000001, 1000);
|
2006-05-12 12:05:29 -06:00
|
|
|
if (result)
|
2007-05-17 09:16:44 -06:00
|
|
|
dbg("%03d < %d bytes [0x%02X]", seq, result,
|
|
|
|
((unsigned char *)buf)[0]);
|
2006-05-12 12:05:29 -06:00
|
|
|
else
|
|
|
|
dbg("%03d < 0 bytes", seq);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void ARK3116_RCV_QUIET(struct usb_serial *serial,
|
|
|
|
__u8 request, __u8 requesttype,
|
|
|
|
__u16 value, __u16 index, char *buf)
|
|
|
|
{
|
|
|
|
usb_control_msg(serial->dev,
|
2006-07-18 09:00:22 -06:00
|
|
|
usb_rcvctrlpipe(serial->dev, 0),
|
2006-05-12 12:05:29 -06:00
|
|
|
request, requesttype, value, index,
|
|
|
|
buf, 0x0000001, 1000);
|
|
|
|
}
|
|
|
|
|
2009-10-28 03:43:26 -06:00
|
|
|
static inline int calc_divisor(int bps)
|
|
|
|
{
|
|
|
|
/* Original ark3116 made some exceptions in rounding here
|
|
|
|
* because windows did the same. Assume that is not really
|
|
|
|
* necessary.
|
|
|
|
* Crystal is 12MHz, probably because of USB, but we divide by 4?
|
|
|
|
*/
|
|
|
|
return (12000000 + 2*bps) / (4*bps);
|
|
|
|
}
|
|
|
|
|
2006-05-12 12:05:29 -06:00
|
|
|
static int ark3116_attach(struct usb_serial *serial)
|
|
|
|
{
|
2009-10-28 03:43:26 -06:00
|
|
|
struct usb_serial_port *port = serial->port[0];
|
|
|
|
struct ark3116_private *priv;
|
|
|
|
|
|
|
|
/* make sure we have our end-points */
|
|
|
|
if ((serial->num_bulk_in == 0) ||
|
|
|
|
(serial->num_bulk_out == 0) ||
|
|
|
|
(serial->num_interrupt_in == 0)) {
|
|
|
|
dev_err(&serial->dev->dev,
|
|
|
|
"%s - missing endpoint - "
|
|
|
|
"bulk in: %d, bulk out: %d, int in %d\n",
|
|
|
|
KBUILD_MODNAME,
|
|
|
|
serial->num_bulk_in,
|
|
|
|
serial->num_bulk_out,
|
|
|
|
serial->num_interrupt_in);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
2006-05-12 12:05:29 -06:00
|
|
|
|
2009-10-28 03:43:26 -06:00
|
|
|
priv = kzalloc(sizeof(struct ark3116_private),
|
|
|
|
GFP_KERNEL);
|
|
|
|
if (!priv)
|
2009-09-19 14:13:33 -06:00
|
|
|
return -ENOMEM;
|
2006-05-12 12:05:29 -06:00
|
|
|
|
2009-10-28 03:43:26 -06:00
|
|
|
init_waitqueue_head(&priv->delta_msr_wait);
|
|
|
|
mutex_init(&priv->hw_lock);
|
|
|
|
spin_lock_init(&priv->status_lock);
|
|
|
|
|
|
|
|
priv->irda = is_irda(serial);
|
|
|
|
|
|
|
|
usb_set_serial_port_data(port, priv);
|
2009-08-06 17:09:52 -06:00
|
|
|
|
2009-10-28 03:43:26 -06:00
|
|
|
/* setup the hardware */
|
|
|
|
ark3116_write_reg(serial, UART_IER, 0);
|
|
|
|
/* disable DMA */
|
|
|
|
ark3116_write_reg(serial, UART_FCR, 0);
|
|
|
|
/* handshake control */
|
|
|
|
priv->hcr = 0;
|
|
|
|
ark3116_write_reg(serial, 0x8 , 0);
|
|
|
|
/* modem control */
|
|
|
|
priv->mcr = 0;
|
|
|
|
ark3116_write_reg(serial, UART_MCR, 0);
|
2009-08-06 17:09:52 -06:00
|
|
|
|
2009-10-28 03:43:26 -06:00
|
|
|
if (!(priv->irda)) {
|
|
|
|
ark3116_write_reg(serial, 0xb , 0);
|
|
|
|
} else {
|
|
|
|
ark3116_write_reg(serial, 0xb , 1);
|
|
|
|
ark3116_write_reg(serial, 0xc , 0);
|
|
|
|
ark3116_write_reg(serial, 0xd , 0x41);
|
|
|
|
ark3116_write_reg(serial, 0xa , 1);
|
2009-08-06 17:09:52 -06:00
|
|
|
}
|
2006-05-12 12:05:29 -06:00
|
|
|
|
2009-10-28 03:43:26 -06:00
|
|
|
/* setup baudrate */
|
|
|
|
ark3116_write_reg(serial, UART_LCR, UART_LCR_DLAB);
|
2006-05-12 12:05:29 -06:00
|
|
|
|
2009-10-28 03:43:26 -06:00
|
|
|
/* setup for 9600 8N1 */
|
|
|
|
priv->quot = calc_divisor(9600);
|
|
|
|
ark3116_write_reg(serial, UART_DLL, priv->quot & 0xff);
|
|
|
|
ark3116_write_reg(serial, UART_DLM, (priv->quot>>8) & 0xff);
|
|
|
|
|
|
|
|
priv->lcr = UART_LCR_WLEN8;
|
|
|
|
ark3116_write_reg(serial, UART_LCR, UART_LCR_WLEN8);
|
|
|
|
|
|
|
|
ark3116_write_reg(serial, 0xe, 0);
|
|
|
|
|
|
|
|
if (priv->irda)
|
|
|
|
ark3116_write_reg(serial, 0x9, 0);
|
|
|
|
|
|
|
|
dev_info(&serial->dev->dev,
|
|
|
|
"%s using %s mode\n",
|
|
|
|
KBUILD_MODNAME,
|
|
|
|
priv->irda ? "IrDA" : "RS232");
|
2006-07-18 09:00:22 -06:00
|
|
|
return 0;
|
2009-09-19 14:13:33 -06:00
|
|
|
}
|
2006-05-12 12:05:29 -06:00
|
|
|
|
2009-10-28 03:43:26 -06:00
|
|
|
static void ark3116_release(struct usb_serial *serial)
|
|
|
|
{
|
|
|
|
struct usb_serial_port *port = serial->port[0];
|
|
|
|
struct ark3116_private *priv = usb_get_serial_port_data(port);
|
|
|
|
|
|
|
|
/* device is closed, so URBs and DMA should be down */
|
|
|
|
|
|
|
|
usb_set_serial_port_data(port, NULL);
|
|
|
|
|
|
|
|
mutex_destroy(&priv->hw_lock);
|
|
|
|
|
|
|
|
kfree(priv);
|
|
|
|
}
|
|
|
|
|
2009-09-19 14:13:33 -06:00
|
|
|
static void ark3116_init_termios(struct tty_struct *tty)
|
|
|
|
{
|
|
|
|
struct ktermios *termios = tty->termios;
|
|
|
|
*termios = tty_std_termios;
|
|
|
|
termios->c_cflag = B9600 | CS8
|
|
|
|
| CREAD | HUPCL | CLOCAL;
|
|
|
|
termios->c_ispeed = 9600;
|
|
|
|
termios->c_ospeed = 9600;
|
2006-05-12 12:05:29 -06:00
|
|
|
}
|
|
|
|
|
2008-07-22 04:09:07 -06:00
|
|
|
static void ark3116_set_termios(struct tty_struct *tty,
|
|
|
|
struct usb_serial_port *port,
|
2006-12-08 03:38:45 -07:00
|
|
|
struct ktermios *old_termios)
|
2006-05-12 12:05:29 -06:00
|
|
|
{
|
|
|
|
struct usb_serial *serial = port->serial;
|
2009-10-28 03:43:26 -06:00
|
|
|
struct ark3116_private *priv = usb_get_serial_port_data(port);
|
2008-07-22 04:09:07 -06:00
|
|
|
struct ktermios *termios = tty->termios;
|
2007-10-18 02:24:17 -06:00
|
|
|
unsigned int cflag = termios->c_cflag;
|
2009-10-28 03:43:26 -06:00
|
|
|
int bps = tty_get_baud_rate(tty);
|
|
|
|
int quot;
|
|
|
|
__u8 lcr, hcr, eval;
|
|
|
|
|
|
|
|
/* set data bit count */
|
|
|
|
switch (cflag & CSIZE) {
|
|
|
|
case CS5:
|
|
|
|
lcr = UART_LCR_WLEN5;
|
|
|
|
break;
|
|
|
|
case CS6:
|
|
|
|
lcr = UART_LCR_WLEN6;
|
|
|
|
break;
|
|
|
|
case CS7:
|
|
|
|
lcr = UART_LCR_WLEN7;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
case CS8:
|
|
|
|
lcr = UART_LCR_WLEN8;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
if (cflag & CSTOPB)
|
|
|
|
lcr |= UART_LCR_STOP;
|
|
|
|
if (cflag & PARENB)
|
|
|
|
lcr |= UART_LCR_PARITY;
|
|
|
|
if (!(cflag & PARODD))
|
|
|
|
lcr |= UART_LCR_EPAR;
|
|
|
|
#ifdef CMSPAR
|
|
|
|
if (cflag & CMSPAR)
|
|
|
|
lcr |= UART_LCR_SPAR;
|
|
|
|
#endif
|
|
|
|
/* handshake control */
|
|
|
|
hcr = (cflag & CRTSCTS) ? 0x03 : 0x00;
|
|
|
|
|
|
|
|
/* calc baudrate */
|
|
|
|
dbg("%s - setting bps to %d", __func__, bps);
|
|
|
|
eval = 0;
|
|
|
|
switch (bps) {
|
|
|
|
case 0:
|
|
|
|
quot = calc_divisor(9600);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
if ((bps < 75) || (bps > 3000000))
|
|
|
|
bps = 9600;
|
|
|
|
quot = calc_divisor(bps);
|
|
|
|
break;
|
|
|
|
case 460800:
|
|
|
|
eval = 1;
|
|
|
|
quot = calc_divisor(bps);
|
|
|
|
break;
|
|
|
|
case 921600:
|
|
|
|
eval = 2;
|
|
|
|
quot = calc_divisor(bps);
|
|
|
|
break;
|
|
|
|
}
|
2006-05-12 12:05:29 -06:00
|
|
|
|
2009-10-28 03:43:26 -06:00
|
|
|
/* Update state: synchronize */
|
|
|
|
mutex_lock(&priv->hw_lock);
|
2006-05-12 12:05:29 -06:00
|
|
|
|
2009-10-28 03:43:26 -06:00
|
|
|
/* keep old LCR_SBC bit */
|
|
|
|
lcr |= (priv->lcr & UART_LCR_SBC);
|
2006-05-12 12:05:29 -06:00
|
|
|
|
2009-10-28 03:43:26 -06:00
|
|
|
dbg("%s - setting hcr:0x%02x,lcr:0x%02x,quot:%d",
|
|
|
|
__func__, hcr, lcr, quot);
|
2006-05-12 12:05:29 -06:00
|
|
|
|
2009-10-28 03:43:26 -06:00
|
|
|
/* handshake control */
|
|
|
|
if (priv->hcr != hcr) {
|
|
|
|
priv->hcr = hcr;
|
|
|
|
ark3116_write_reg(serial, 0x8, hcr);
|
2006-05-12 12:05:29 -06:00
|
|
|
}
|
|
|
|
|
2009-10-28 03:43:26 -06:00
|
|
|
/* baudrate */
|
|
|
|
if (priv->quot != quot) {
|
|
|
|
priv->quot = quot;
|
|
|
|
priv->lcr = lcr; /* need to write lcr anyway */
|
|
|
|
|
|
|
|
/* disable DMA since transmit/receive is
|
|
|
|
* shadowed by UART_DLL
|
|
|
|
*/
|
|
|
|
ark3116_write_reg(serial, UART_FCR, 0);
|
|
|
|
|
|
|
|
ark3116_write_reg(serial, UART_LCR,
|
|
|
|
lcr|UART_LCR_DLAB);
|
|
|
|
ark3116_write_reg(serial, UART_DLL, quot & 0xff);
|
|
|
|
ark3116_write_reg(serial, UART_DLM, (quot>>8) & 0xff);
|
|
|
|
|
|
|
|
/* restore lcr */
|
|
|
|
ark3116_write_reg(serial, UART_LCR, lcr);
|
|
|
|
/* magic baudrate thingy: not sure what it does,
|
|
|
|
* but windows does this as well.
|
|
|
|
*/
|
|
|
|
ark3116_write_reg(serial, 0xe, eval);
|
|
|
|
|
|
|
|
/* enable DMA */
|
|
|
|
ark3116_write_reg(serial, UART_FCR, UART_FCR_DMA_SELECT);
|
|
|
|
} else if (priv->lcr != lcr) {
|
|
|
|
priv->lcr = lcr;
|
|
|
|
ark3116_write_reg(serial, UART_LCR, lcr);
|
2006-05-12 12:05:29 -06:00
|
|
|
}
|
|
|
|
|
2009-10-28 03:43:26 -06:00
|
|
|
mutex_unlock(&priv->hw_lock);
|
2006-05-12 12:05:29 -06:00
|
|
|
|
2009-10-28 03:43:26 -06:00
|
|
|
/* check for software flow control */
|
|
|
|
if (I_IXOFF(tty) || I_IXON(tty)) {
|
|
|
|
dev_warn(&serial->dev->dev,
|
|
|
|
"%s: don't know how to do software flow control\n",
|
|
|
|
KBUILD_MODNAME);
|
2006-05-12 12:05:29 -06:00
|
|
|
}
|
|
|
|
|
2009-10-28 03:43:26 -06:00
|
|
|
/* Don't rewrite B0 */
|
|
|
|
if (tty_termios_baud_rate(termios))
|
|
|
|
tty_termios_encode_baud_rate(termios, bps, bps);
|
|
|
|
}
|
2006-05-12 12:05:29 -06:00
|
|
|
|
2009-10-28 03:43:26 -06:00
|
|
|
static void ark3116_close(struct usb_serial_port *port)
|
|
|
|
{
|
|
|
|
struct usb_serial *serial = port->serial;
|
2006-05-12 12:05:29 -06:00
|
|
|
|
2009-10-28 03:43:26 -06:00
|
|
|
if (serial->dev) {
|
|
|
|
/* disable DMA */
|
|
|
|
ark3116_write_reg(serial, UART_FCR, 0);
|
2006-05-12 12:05:29 -06:00
|
|
|
|
2009-10-28 03:43:26 -06:00
|
|
|
/* deactivate interrupts */
|
|
|
|
ark3116_write_reg(serial, UART_IER, 0);
|
2007-10-18 02:24:17 -06:00
|
|
|
|
2009-10-28 03:43:26 -06:00
|
|
|
/* shutdown any bulk reads that might be going on */
|
|
|
|
if (serial->num_bulk_out)
|
|
|
|
usb_kill_urb(port->write_urb);
|
|
|
|
if (serial->num_bulk_in)
|
|
|
|
usb_kill_urb(port->read_urb);
|
|
|
|
if (serial->num_interrupt_in)
|
|
|
|
usb_kill_urb(port->interrupt_in_urb);
|
|
|
|
}
|
2006-05-12 12:05:29 -06:00
|
|
|
}
|
|
|
|
|
2009-09-19 14:13:26 -06:00
|
|
|
static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port)
|
2006-05-12 12:05:29 -06:00
|
|
|
{
|
2009-10-28 03:43:26 -06:00
|
|
|
struct ark3116_private *priv = usb_get_serial_port_data(port);
|
2006-05-12 12:05:29 -06:00
|
|
|
struct usb_serial *serial = port->serial;
|
2009-10-28 03:43:26 -06:00
|
|
|
unsigned char *buf;
|
|
|
|
int result;
|
2006-05-12 12:05:29 -06:00
|
|
|
|
|
|
|
buf = kmalloc(1, GFP_KERNEL);
|
2009-10-28 03:43:26 -06:00
|
|
|
if (buf == NULL)
|
2006-05-12 12:05:29 -06:00
|
|
|
return -ENOMEM;
|
|
|
|
|
2009-09-19 14:13:26 -06:00
|
|
|
result = usb_serial_generic_open(tty, port);
|
2009-10-28 03:43:26 -06:00
|
|
|
if (result) {
|
|
|
|
dbg("%s - usb_serial_generic_open failed: %d",
|
|
|
|
__func__, result);
|
2007-03-26 10:12:44 -06:00
|
|
|
goto err_out;
|
2009-10-28 03:43:26 -06:00
|
|
|
}
|
2006-05-12 12:05:29 -06:00
|
|
|
|
2009-10-28 03:43:26 -06:00
|
|
|
/* setup termios */
|
|
|
|
if (tty)
|
|
|
|
ark3116_set_termios(tty, port, NULL);
|
2006-05-12 12:05:29 -06:00
|
|
|
|
2009-10-28 03:43:26 -06:00
|
|
|
/* remove any data still left: also clears error state */
|
|
|
|
ark3116_read_reg(serial, UART_RX, buf);
|
2006-05-12 12:05:29 -06:00
|
|
|
|
2009-10-28 03:43:26 -06:00
|
|
|
/* read modem status */
|
|
|
|
priv->msr = ark3116_read_reg(serial, UART_MSR, buf);
|
|
|
|
/* read line status */
|
|
|
|
priv->lsr = ark3116_read_reg(serial, UART_LSR, buf);
|
2006-05-12 12:05:29 -06:00
|
|
|
|
2009-10-28 03:43:26 -06:00
|
|
|
result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
|
|
|
|
if (result) {
|
|
|
|
dev_err(&port->dev, "submit irq_in urb failed %d\n",
|
|
|
|
result);
|
|
|
|
ark3116_close(port);
|
|
|
|
goto err_out;
|
|
|
|
}
|
2006-05-12 12:05:29 -06:00
|
|
|
|
2009-10-28 03:43:26 -06:00
|
|
|
/* activate interrupts */
|
|
|
|
ark3116_write_reg(port->serial, UART_IER, UART_IER_MSI|UART_IER_RLSI);
|
2006-05-12 12:05:29 -06:00
|
|
|
|
2009-10-28 03:43:26 -06:00
|
|
|
/* enable DMA */
|
|
|
|
ark3116_write_reg(port->serial, UART_FCR, UART_FCR_DMA_SELECT);
|
2006-05-12 12:05:29 -06:00
|
|
|
|
2007-03-26 10:12:44 -06:00
|
|
|
err_out:
|
2006-05-12 12:05:29 -06:00
|
|
|
kfree(buf);
|
|
|
|
return result;
|
|
|
|
}
|
|
|
|
|
2008-07-22 04:09:07 -06:00
|
|
|
static int ark3116_ioctl(struct tty_struct *tty, struct file *file,
|
2006-05-12 12:05:29 -06:00
|
|
|
unsigned int cmd, unsigned long arg)
|
|
|
|
{
|
2008-07-22 04:09:07 -06:00
|
|
|
struct usb_serial_port *port = tty->driver_data;
|
2009-10-28 03:43:26 -06:00
|
|
|
struct ark3116_private *priv = usb_get_serial_port_data(port);
|
2006-07-18 09:00:52 -06:00
|
|
|
struct serial_struct serstruct;
|
|
|
|
void __user *user_arg = (void __user *)arg;
|
|
|
|
|
|
|
|
switch (cmd) {
|
|
|
|
case TIOCGSERIAL:
|
|
|
|
/* XXX: Some of these values are probably wrong. */
|
2008-04-29 07:35:39 -06:00
|
|
|
memset(&serstruct, 0, sizeof(serstruct));
|
2006-07-18 09:00:52 -06:00
|
|
|
serstruct.type = PORT_16654;
|
|
|
|
serstruct.line = port->serial->minor;
|
|
|
|
serstruct.port = port->number;
|
|
|
|
serstruct.custom_divisor = 0;
|
|
|
|
serstruct.baud_base = 460800;
|
|
|
|
|
2008-04-29 07:35:39 -06:00
|
|
|
if (copy_to_user(user_arg, &serstruct, sizeof(serstruct)))
|
2006-07-18 09:00:52 -06:00
|
|
|
return -EFAULT;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
case TIOCSSERIAL:
|
2008-04-29 07:35:39 -06:00
|
|
|
if (copy_from_user(&serstruct, user_arg, sizeof(serstruct)))
|
2006-07-18 09:00:52 -06:00
|
|
|
return -EFAULT;
|
|
|
|
return 0;
|
2009-10-28 03:43:26 -06:00
|
|
|
case TIOCMIWAIT:
|
|
|
|
for (;;) {
|
|
|
|
struct async_icount prev = priv->icount;
|
|
|
|
interruptible_sleep_on(&priv->delta_msr_wait);
|
|
|
|
/* see if a signal did it */
|
|
|
|
if (signal_pending(current))
|
|
|
|
return -ERESTARTSYS;
|
|
|
|
if ((prev.rng == priv->icount.rng) &&
|
|
|
|
(prev.dsr == priv->icount.dsr) &&
|
|
|
|
(prev.dcd == priv->icount.dcd) &&
|
|
|
|
(prev.cts == priv->icount.cts))
|
|
|
|
return -EIO;
|
|
|
|
if ((arg & TIOCM_RNG &&
|
|
|
|
(prev.rng != priv->icount.rng)) ||
|
|
|
|
(arg & TIOCM_DSR &&
|
|
|
|
(prev.dsr != priv->icount.dsr)) ||
|
|
|
|
(arg & TIOCM_CD &&
|
|
|
|
(prev.dcd != priv->icount.dcd)) ||
|
|
|
|
(arg & TIOCM_CTS &&
|
|
|
|
(prev.cts != priv->icount.cts)))
|
|
|
|
return 0;
|
|
|
|
}
|
2006-07-18 09:00:52 -06:00
|
|
|
break;
|
2009-10-28 03:43:26 -06:00
|
|
|
case TIOCGICOUNT: {
|
|
|
|
struct serial_icounter_struct icount;
|
|
|
|
struct async_icount cnow = priv->icount;
|
|
|
|
memset(&icount, 0, sizeof(icount));
|
|
|
|
icount.cts = cnow.cts;
|
|
|
|
icount.dsr = cnow.dsr;
|
|
|
|
icount.rng = cnow.rng;
|
|
|
|
icount.dcd = cnow.dcd;
|
|
|
|
icount.rx = cnow.rx;
|
|
|
|
icount.tx = cnow.tx;
|
|
|
|
icount.frame = cnow.frame;
|
|
|
|
icount.overrun = cnow.overrun;
|
|
|
|
icount.parity = cnow.parity;
|
|
|
|
icount.brk = cnow.brk;
|
|
|
|
icount.buf_overrun = cnow.buf_overrun;
|
|
|
|
if (copy_to_user(user_arg, &icount, sizeof(icount)))
|
|
|
|
return -EFAULT;
|
|
|
|
return 0;
|
|
|
|
}
|
2006-07-18 09:00:52 -06:00
|
|
|
}
|
|
|
|
|
2006-05-12 12:05:29 -06:00
|
|
|
return -ENOIOCTLCMD;
|
|
|
|
}
|
|
|
|
|
2008-07-22 04:09:07 -06:00
|
|
|
static int ark3116_tiocmget(struct tty_struct *tty, struct file *file)
|
2006-05-12 12:05:29 -06:00
|
|
|
{
|
2008-07-22 04:09:07 -06:00
|
|
|
struct usb_serial_port *port = tty->driver_data;
|
2009-10-28 03:43:27 -06:00
|
|
|
struct ark3116_private *priv = usb_get_serial_port_data(port);
|
|
|
|
__u32 status;
|
|
|
|
__u32 ctrl;
|
|
|
|
unsigned long flags;
|
2006-05-12 12:05:29 -06:00
|
|
|
|
2009-10-28 03:43:27 -06:00
|
|
|
mutex_lock(&priv->hw_lock);
|
|
|
|
ctrl = priv->mcr;
|
|
|
|
mutex_unlock(&priv->hw_lock);
|
2006-05-12 12:05:29 -06:00
|
|
|
|
2009-10-28 03:43:27 -06:00
|
|
|
spin_lock_irqsave(&priv->status_lock, flags);
|
|
|
|
status = priv->msr;
|
|
|
|
spin_unlock_irqrestore(&priv->status_lock, flags);
|
|
|
|
|
|
|
|
return (status & UART_MSR_DSR ? TIOCM_DSR : 0) |
|
|
|
|
(status & UART_MSR_CTS ? TIOCM_CTS : 0) |
|
|
|
|
(status & UART_MSR_RI ? TIOCM_RI : 0) |
|
|
|
|
(status & UART_MSR_DCD ? TIOCM_CD : 0) |
|
|
|
|
(ctrl & UART_MCR_DTR ? TIOCM_DTR : 0) |
|
|
|
|
(ctrl & UART_MCR_RTS ? TIOCM_RTS : 0) |
|
|
|
|
(ctrl & UART_MCR_OUT1 ? TIOCM_OUT1 : 0) |
|
|
|
|
(ctrl & UART_MCR_OUT2 ? TIOCM_OUT2 : 0);
|
2006-05-12 12:05:29 -06:00
|
|
|
}
|
|
|
|
|
|
|
|
static struct usb_driver ark3116_driver = {
|
|
|
|
.name = "ark3116",
|
|
|
|
.probe = usb_serial_probe,
|
|
|
|
.disconnect = usb_serial_disconnect,
|
|
|
|
.id_table = id_table,
|
2006-12-17 13:50:24 -07:00
|
|
|
.no_dynamic_id = 1,
|
2006-05-12 12:05:29 -06:00
|
|
|
};
|
|
|
|
|
|
|
|
static struct usb_serial_driver ark3116_device = {
|
|
|
|
.driver = {
|
|
|
|
.owner = THIS_MODULE,
|
|
|
|
.name = "ark3116",
|
|
|
|
},
|
|
|
|
.id_table = id_table,
|
2006-12-17 13:50:24 -07:00
|
|
|
.usb_driver = &ark3116_driver,
|
2006-05-12 12:05:29 -06:00
|
|
|
.num_ports = 1,
|
|
|
|
.attach = ark3116_attach,
|
2009-10-28 03:43:26 -06:00
|
|
|
.release = ark3116_release,
|
2006-05-12 12:05:29 -06:00
|
|
|
.set_termios = ark3116_set_termios,
|
2009-09-19 14:13:33 -06:00
|
|
|
.init_termios = ark3116_init_termios,
|
2006-05-12 12:05:29 -06:00
|
|
|
.ioctl = ark3116_ioctl,
|
|
|
|
.tiocmget = ark3116_tiocmget,
|
|
|
|
.open = ark3116_open,
|
2009-10-28 03:43:26 -06:00
|
|
|
.close = ark3116_close,
|
2006-05-12 12:05:29 -06:00
|
|
|
};
|
|
|
|
|
|
|
|
static int __init ark3116_init(void)
|
|
|
|
{
|
|
|
|
int retval;
|
|
|
|
|
|
|
|
retval = usb_serial_register(&ark3116_device);
|
|
|
|
if (retval)
|
|
|
|
return retval;
|
|
|
|
retval = usb_register(&ark3116_driver);
|
2009-10-28 03:43:25 -06:00
|
|
|
if (retval == 0) {
|
|
|
|
printk(KERN_INFO "%s:"
|
|
|
|
DRIVER_VERSION ":"
|
|
|
|
DRIVER_DESC "\n",
|
|
|
|
KBUILD_MODNAME);
|
|
|
|
} else
|
2006-05-12 12:05:29 -06:00
|
|
|
usb_serial_deregister(&ark3116_device);
|
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __exit ark3116_exit(void)
|
|
|
|
{
|
|
|
|
usb_deregister(&ark3116_driver);
|
|
|
|
usb_serial_deregister(&ark3116_device);
|
|
|
|
}
|
|
|
|
|
|
|
|
module_init(ark3116_init);
|
|
|
|
module_exit(ark3116_exit);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
|
2009-10-28 03:43:25 -06:00
|
|
|
MODULE_AUTHOR(DRIVER_AUTHOR);
|
|
|
|
MODULE_DESCRIPTION(DRIVER_DESC);
|
|
|
|
|
2006-05-12 12:05:29 -06:00
|
|
|
module_param(debug, bool, S_IRUGO | S_IWUSR);
|
2009-10-28 03:43:25 -06:00
|
|
|
MODULE_PARM_DESC(debug, "Enable debug");
|
2006-05-12 12:05:29 -06:00
|
|
|
|
2009-10-28 03:43:25 -06:00
|
|
|
/*
|
|
|
|
* The following describes what I learned from studying the old
|
|
|
|
* ark3116.c driver, disassembling the windows driver, and some lucky
|
|
|
|
* guesses. Since I do not have any datasheet or other
|
|
|
|
* documentation, inaccuracies are almost guaranteed.
|
|
|
|
*
|
|
|
|
* Some specs for the ARK3116 can be found here:
|
|
|
|
* http://web.archive.org/web/20060318000438/
|
|
|
|
* www.arkmicro.com/en/products/view.php?id=10
|
|
|
|
* On that page, 2 GPIO pins are mentioned: I assume these are the
|
|
|
|
* OUT1 and OUT2 pins of the UART, so I added support for those
|
|
|
|
* through the MCR. Since the pins are not available on my hardware,
|
|
|
|
* I could not verify this.
|
|
|
|
* Also, it states there is "on-chip hardware flow control". I have
|
|
|
|
* discovered how to enable that. Unfortunately, I do not know how to
|
|
|
|
* enable XON/XOFF (software) flow control, which would need support
|
|
|
|
* from the chip as well to work. Because of the wording on the web
|
|
|
|
* page there is a real possibility the chip simply does not support
|
|
|
|
* software flow control.
|
|
|
|
*
|
|
|
|
* I got my ark3116 as part of a mobile phone adapter cable. On the
|
|
|
|
* PCB, the following numbered contacts are present:
|
|
|
|
*
|
|
|
|
* 1:- +5V
|
|
|
|
* 2:o DTR
|
|
|
|
* 3:i RX
|
|
|
|
* 4:i DCD
|
|
|
|
* 5:o RTS
|
|
|
|
* 6:o TX
|
|
|
|
* 7:i RI
|
|
|
|
* 8:i DSR
|
|
|
|
* 10:- 0V
|
|
|
|
* 11:i CTS
|
|
|
|
*
|
|
|
|
* On my chip, all signals seem to be 3.3V, but 5V tolerant. But that
|
|
|
|
* may be different for the one you have ;-).
|
|
|
|
*
|
|
|
|
* The windows driver limits the registers to 0-F, so I assume there
|
|
|
|
* are actually 16 present on the device.
|
|
|
|
*
|
|
|
|
* On an UART interrupt, 4 bytes of data come in on the interrupt
|
|
|
|
* endpoint. The bytes are 0xe8 IIR LSR MSR.
|
|
|
|
*
|
|
|
|
* The baudrate seems to be generated from the 12MHz crystal, using
|
|
|
|
* 4-times subsampling. So quot=12e6/(4*baud). Also see description
|
|
|
|
* of register E.
|
|
|
|
*
|
|
|
|
* Registers 0-7:
|
|
|
|
* These seem to be the same as for a regular 16450. The FCR is set
|
|
|
|
* to UART_FCR_DMA_SELECT (0x8), I guess to enable transfers between
|
|
|
|
* the UART and the USB bridge/DMA engine.
|
|
|
|
*
|
|
|
|
* Register 8:
|
|
|
|
* By trial and error, I found out that bit 0 enables hardware CTS,
|
|
|
|
* stopping TX when CTS is +5V. Bit 1 does the same for RTS, making
|
|
|
|
* RTS +5V when the 3116 cannot transfer the data to the USB bus
|
|
|
|
* (verified by disabling the reading URB). Note that as far as I can
|
|
|
|
* tell, the windows driver does NOT use this, so there might be some
|
|
|
|
* hardware bug or something.
|
|
|
|
*
|
|
|
|
* According to a patch provided here
|
|
|
|
* (http://lkml.org/lkml/2009/7/26/56), the ARK3116 can also be used
|
|
|
|
* as an IrDA dongle. Since I do not have such a thing, I could not
|
|
|
|
* investigate that aspect. However, I can speculate ;-).
|
|
|
|
*
|
|
|
|
* - IrDA encodes data differently than RS232. Most likely, one of
|
|
|
|
* the bits in registers 9..E enables the IR ENDEC (encoder/decoder).
|
|
|
|
* - Depending on the IR transceiver, the input and output need to be
|
|
|
|
* inverted, so there are probably bits for that as well.
|
|
|
|
* - IrDA is half-duplex, so there should be a bit for selecting that.
|
|
|
|
*
|
|
|
|
* This still leaves at least two registers unaccounted for. Perhaps
|
|
|
|
* The chip can do XON/XOFF or CRC in HW?
|
|
|
|
*
|
|
|
|
* Register 9:
|
|
|
|
* Set to 0x00 for IrDA, when the baudrate is initialised.
|
|
|
|
*
|
|
|
|
* Register A:
|
|
|
|
* Set to 0x01 for IrDA, at init.
|
|
|
|
*
|
|
|
|
* Register B:
|
|
|
|
* Set to 0x01 for IrDA, 0x00 for RS232, at init.
|
|
|
|
*
|
|
|
|
* Register C:
|
|
|
|
* Set to 00 for IrDA, at init.
|
|
|
|
*
|
|
|
|
* Register D:
|
|
|
|
* Set to 0x41 for IrDA, at init.
|
|
|
|
*
|
|
|
|
* Register E:
|
|
|
|
* Somekind of baudrate override. The windows driver seems to set
|
|
|
|
* this to 0x00 for normal baudrates, 0x01 for 460800, 0x02 for 921600.
|
|
|
|
* Since 460800 and 921600 cannot be obtained by dividing 3MHz by an integer,
|
|
|
|
* it could be somekind of subdivisor thingy.
|
|
|
|
* However,it does not seem to do anything: selecting 921600 (divisor 3,
|
|
|
|
* reg E=2), still gets 1 MHz. I also checked if registers 9, C or F would
|
|
|
|
* work, but they don't.
|
|
|
|
*
|
|
|
|
* Register F: unknown
|
|
|
|
*/
|