2009-03-23 19:38:16 -06:00
|
|
|
/*
|
|
|
|
* linux/arch/arm/mach-omap2/board-3430sdp.c
|
|
|
|
*
|
|
|
|
* Copyright (C) 2007 Texas Instruments
|
|
|
|
*
|
|
|
|
* Modified from mach-omap2/board-generic.c
|
|
|
|
*
|
|
|
|
* Initial code: Syed Mohammed Khasim
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
|
|
* published by the Free Software Foundation.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/input.h>
|
2009-10-22 15:43:17 -06:00
|
|
|
#include <linux/input/matrix_keypad.h>
|
2009-03-23 19:38:16 -06:00
|
|
|
#include <linux/spi/spi.h>
|
|
|
|
#include <linux/spi/ads7846.h>
|
2009-12-13 12:05:51 -07:00
|
|
|
#include <linux/i2c/twl.h>
|
2009-03-23 19:38:16 -06:00
|
|
|
#include <linux/regulator/machine.h>
|
|
|
|
#include <linux/io.h>
|
|
|
|
#include <linux/gpio.h>
|
2010-09-15 08:49:23 -06:00
|
|
|
#include <linux/mmc/host.h>
|
2009-03-23 19:38:16 -06:00
|
|
|
|
|
|
|
#include <mach/hardware.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
|
|
#include <asm/mach/arch.h>
|
|
|
|
#include <asm/mach/map.h>
|
|
|
|
|
2009-10-20 10:40:47 -06:00
|
|
|
#include <plat/mcspi.h>
|
|
|
|
#include <plat/board.h>
|
|
|
|
#include <plat/usb.h>
|
|
|
|
#include <plat/common.h>
|
|
|
|
#include <plat/dma.h>
|
|
|
|
#include <plat/gpmc.h>
|
2009-12-09 09:25:18 -07:00
|
|
|
#include <plat/display.h>
|
2009-03-23 19:38:16 -06:00
|
|
|
|
2009-10-20 10:40:47 -06:00
|
|
|
#include <plat/gpmc-smc91x.h>
|
2009-03-23 19:38:16 -06:00
|
|
|
|
2010-10-08 10:58:35 -06:00
|
|
|
#include "board-flash.h"
|
2009-12-11 17:16:32 -07:00
|
|
|
#include "mux.h"
|
2009-05-28 15:03:59 -06:00
|
|
|
#include "sdram-qimonda-hyb18m512160af-6.h"
|
2010-02-15 11:03:34 -07:00
|
|
|
#include "hsmmc.h"
|
2009-12-15 17:37:18 -07:00
|
|
|
#include "pm.h"
|
2010-10-08 11:40:20 -06:00
|
|
|
#include "control.h"
|
2009-03-23 19:38:16 -06:00
|
|
|
|
|
|
|
#define CONFIG_DISABLE_HFCLK 1
|
|
|
|
|
|
|
|
#define SDP3430_TS_GPIO_IRQ_SDPV1 3
|
|
|
|
#define SDP3430_TS_GPIO_IRQ_SDPV2 2
|
|
|
|
|
|
|
|
#define ENABLE_VAUX3_DEDICATED 0x03
|
|
|
|
#define ENABLE_VAUX3_DEV_GRP 0x20
|
|
|
|
|
|
|
|
#define TWL4030_MSECURE_GPIO 22
|
|
|
|
|
2009-12-15 17:37:18 -07:00
|
|
|
/* FIXME: These values need to be updated based on more profiling on 3430sdp*/
|
|
|
|
static struct cpuidle_params omap3_cpuidle_params_table[] = {
|
|
|
|
/* C1 */
|
2009-10-29 02:30:19 -06:00
|
|
|
{1, 2, 2, 5},
|
2009-12-15 17:37:18 -07:00
|
|
|
/* C2 */
|
2009-10-29 02:30:19 -06:00
|
|
|
{1, 10, 10, 30},
|
2009-12-15 17:37:18 -07:00
|
|
|
/* C3 */
|
2009-10-29 02:30:19 -06:00
|
|
|
{1, 50, 50, 300},
|
2009-12-15 17:37:18 -07:00
|
|
|
/* C4 */
|
2009-10-29 02:30:19 -06:00
|
|
|
{1, 1500, 1800, 4000},
|
2009-12-15 17:37:18 -07:00
|
|
|
/* C5 */
|
2009-10-29 02:30:19 -06:00
|
|
|
{1, 2500, 7500, 12000},
|
2009-12-15 17:37:18 -07:00
|
|
|
/* C6 */
|
2009-10-29 02:30:19 -06:00
|
|
|
{1, 3000, 8500, 15000},
|
2009-12-15 17:37:18 -07:00
|
|
|
/* C7 */
|
2009-10-29 02:30:19 -06:00
|
|
|
{1, 10000, 30000, 300000},
|
2009-12-15 17:37:18 -07:00
|
|
|
};
|
|
|
|
|
2010-10-08 11:01:13 -06:00
|
|
|
static uint32_t board_keymap[] = {
|
2009-03-23 19:38:16 -06:00
|
|
|
KEY(0, 0, KEY_LEFT),
|
|
|
|
KEY(0, 1, KEY_RIGHT),
|
|
|
|
KEY(0, 2, KEY_A),
|
|
|
|
KEY(0, 3, KEY_B),
|
|
|
|
KEY(0, 4, KEY_C),
|
|
|
|
KEY(1, 0, KEY_DOWN),
|
|
|
|
KEY(1, 1, KEY_UP),
|
|
|
|
KEY(1, 2, KEY_E),
|
|
|
|
KEY(1, 3, KEY_F),
|
|
|
|
KEY(1, 4, KEY_G),
|
|
|
|
KEY(2, 0, KEY_ENTER),
|
|
|
|
KEY(2, 1, KEY_I),
|
|
|
|
KEY(2, 2, KEY_J),
|
|
|
|
KEY(2, 3, KEY_K),
|
|
|
|
KEY(2, 4, KEY_3),
|
|
|
|
KEY(3, 0, KEY_M),
|
|
|
|
KEY(3, 1, KEY_N),
|
|
|
|
KEY(3, 2, KEY_O),
|
|
|
|
KEY(3, 3, KEY_P),
|
|
|
|
KEY(3, 4, KEY_Q),
|
|
|
|
KEY(4, 0, KEY_R),
|
|
|
|
KEY(4, 1, KEY_4),
|
|
|
|
KEY(4, 2, KEY_T),
|
|
|
|
KEY(4, 3, KEY_U),
|
|
|
|
KEY(4, 4, KEY_D),
|
|
|
|
KEY(5, 0, KEY_V),
|
|
|
|
KEY(5, 1, KEY_W),
|
|
|
|
KEY(5, 2, KEY_L),
|
|
|
|
KEY(5, 3, KEY_S),
|
|
|
|
KEY(5, 4, KEY_H),
|
|
|
|
0
|
|
|
|
};
|
|
|
|
|
2009-09-24 17:23:16 -06:00
|
|
|
static struct matrix_keymap_data board_map_data = {
|
|
|
|
.keymap = board_keymap,
|
|
|
|
.keymap_size = ARRAY_SIZE(board_keymap),
|
|
|
|
};
|
|
|
|
|
2009-03-23 19:38:16 -06:00
|
|
|
static struct twl4030_keypad_data sdp3430_kp_data = {
|
2009-09-24 17:23:16 -06:00
|
|
|
.keymap_data = &board_map_data,
|
2009-03-23 19:38:16 -06:00
|
|
|
.rows = 5,
|
|
|
|
.cols = 6,
|
|
|
|
.rep = 1,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int ts_gpio; /* Needed for ads7846_get_pendown_state */
|
|
|
|
|
|
|
|
/**
|
|
|
|
* @brief ads7846_dev_init : Requests & sets GPIO line for pen-irq
|
|
|
|
*
|
|
|
|
* @return - void. If request gpio fails then Flag KERN_ERR.
|
|
|
|
*/
|
|
|
|
static void ads7846_dev_init(void)
|
|
|
|
{
|
|
|
|
if (gpio_request(ts_gpio, "ADS7846 pendown") < 0) {
|
|
|
|
printk(KERN_ERR "can't get ads746 pen down GPIO\n");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
gpio_direction_input(ts_gpio);
|
2010-05-26 15:42:24 -06:00
|
|
|
gpio_set_debounce(ts_gpio, 310);
|
2009-03-23 19:38:16 -06:00
|
|
|
}
|
|
|
|
|
|
|
|
static int ads7846_get_pendown_state(void)
|
|
|
|
{
|
|
|
|
return !gpio_get_value(ts_gpio);
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct ads7846_platform_data tsc2046_config __initdata = {
|
|
|
|
.get_pendown_state = ads7846_get_pendown_state,
|
|
|
|
.keep_vref_on = 1,
|
2010-05-08 01:09:21 -06:00
|
|
|
.wakeup = true,
|
2009-03-23 19:38:16 -06:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
|
|
static struct omap2_mcspi_device_config tsc2046_mcspi_config = {
|
|
|
|
.turbo_mode = 0,
|
|
|
|
.single_channel = 1, /* 0: slave, 1: master */
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct spi_board_info sdp3430_spi_board_info[] __initdata = {
|
|
|
|
[0] = {
|
|
|
|
/*
|
|
|
|
* TSC2046 operates at a max freqency of 2MHz, so
|
|
|
|
* operate slightly below at 1.5MHz
|
|
|
|
*/
|
|
|
|
.modalias = "ads7846",
|
|
|
|
.bus_num = 1,
|
|
|
|
.chip_select = 0,
|
|
|
|
.max_speed_hz = 1500000,
|
|
|
|
.controller_data = &tsc2046_mcspi_config,
|
|
|
|
.irq = 0,
|
|
|
|
.platform_data = &tsc2046_config,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
2009-12-09 09:25:18 -07:00
|
|
|
|
|
|
|
#define SDP3430_LCD_PANEL_BACKLIGHT_GPIO 8
|
|
|
|
#define SDP3430_LCD_PANEL_ENABLE_GPIO 5
|
|
|
|
|
|
|
|
static unsigned backlight_gpio;
|
|
|
|
static unsigned enable_gpio;
|
|
|
|
static int lcd_enabled;
|
|
|
|
static int dvi_enabled;
|
|
|
|
|
|
|
|
static void __init sdp3430_display_init(void)
|
|
|
|
{
|
|
|
|
int r;
|
|
|
|
|
|
|
|
enable_gpio = SDP3430_LCD_PANEL_ENABLE_GPIO;
|
|
|
|
backlight_gpio = SDP3430_LCD_PANEL_BACKLIGHT_GPIO;
|
|
|
|
|
|
|
|
r = gpio_request(enable_gpio, "LCD reset");
|
|
|
|
if (r) {
|
|
|
|
printk(KERN_ERR "failed to get LCD reset GPIO\n");
|
|
|
|
goto err0;
|
|
|
|
}
|
|
|
|
|
|
|
|
r = gpio_request(backlight_gpio, "LCD Backlight");
|
|
|
|
if (r) {
|
|
|
|
printk(KERN_ERR "failed to get LCD backlight GPIO\n");
|
|
|
|
goto err1;
|
|
|
|
}
|
|
|
|
|
|
|
|
gpio_direction_output(enable_gpio, 0);
|
|
|
|
gpio_direction_output(backlight_gpio, 0);
|
|
|
|
|
|
|
|
return;
|
|
|
|
err1:
|
|
|
|
gpio_free(enable_gpio);
|
|
|
|
err0:
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int sdp3430_panel_enable_lcd(struct omap_dss_device *dssdev)
|
|
|
|
{
|
|
|
|
if (dvi_enabled) {
|
|
|
|
printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
gpio_direction_output(enable_gpio, 1);
|
|
|
|
gpio_direction_output(backlight_gpio, 1);
|
|
|
|
|
|
|
|
lcd_enabled = 1;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void sdp3430_panel_disable_lcd(struct omap_dss_device *dssdev)
|
|
|
|
{
|
|
|
|
lcd_enabled = 0;
|
|
|
|
|
|
|
|
gpio_direction_output(enable_gpio, 0);
|
|
|
|
gpio_direction_output(backlight_gpio, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int sdp3430_panel_enable_dvi(struct omap_dss_device *dssdev)
|
|
|
|
{
|
|
|
|
if (lcd_enabled) {
|
|
|
|
printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
dvi_enabled = 1;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void sdp3430_panel_disable_dvi(struct omap_dss_device *dssdev)
|
|
|
|
{
|
|
|
|
dvi_enabled = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int sdp3430_panel_enable_tv(struct omap_dss_device *dssdev)
|
|
|
|
{
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void sdp3430_panel_disable_tv(struct omap_dss_device *dssdev)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static struct omap_dss_device sdp3430_lcd_device = {
|
|
|
|
.name = "lcd",
|
|
|
|
.driver_name = "sharp_ls_panel",
|
|
|
|
.type = OMAP_DISPLAY_TYPE_DPI,
|
|
|
|
.phy.dpi.data_lines = 16,
|
|
|
|
.platform_enable = sdp3430_panel_enable_lcd,
|
|
|
|
.platform_disable = sdp3430_panel_disable_lcd,
|
2009-03-23 19:38:16 -06:00
|
|
|
};
|
|
|
|
|
2009-12-09 09:25:18 -07:00
|
|
|
static struct omap_dss_device sdp3430_dvi_device = {
|
|
|
|
.name = "dvi",
|
|
|
|
.driver_name = "generic_panel",
|
|
|
|
.type = OMAP_DISPLAY_TYPE_DPI,
|
|
|
|
.phy.dpi.data_lines = 24,
|
|
|
|
.platform_enable = sdp3430_panel_enable_dvi,
|
|
|
|
.platform_disable = sdp3430_panel_disable_dvi,
|
2009-03-23 19:38:16 -06:00
|
|
|
};
|
|
|
|
|
2009-12-09 09:25:18 -07:00
|
|
|
static struct omap_dss_device sdp3430_tv_device = {
|
|
|
|
.name = "tv",
|
|
|
|
.driver_name = "venc",
|
|
|
|
.type = OMAP_DISPLAY_TYPE_VENC,
|
|
|
|
.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
|
|
|
|
.platform_enable = sdp3430_panel_enable_tv,
|
|
|
|
.platform_disable = sdp3430_panel_disable_tv,
|
2009-03-23 19:38:16 -06:00
|
|
|
};
|
|
|
|
|
2009-12-09 09:25:18 -07:00
|
|
|
|
|
|
|
static struct omap_dss_device *sdp3430_dss_devices[] = {
|
2009-03-23 19:38:16 -06:00
|
|
|
&sdp3430_lcd_device,
|
2009-12-09 09:25:18 -07:00
|
|
|
&sdp3430_dvi_device,
|
|
|
|
&sdp3430_tv_device,
|
2009-03-23 19:38:16 -06:00
|
|
|
};
|
|
|
|
|
2009-12-09 09:25:18 -07:00
|
|
|
static struct omap_dss_board_info sdp3430_dss_data = {
|
|
|
|
.num_devices = ARRAY_SIZE(sdp3430_dss_devices),
|
|
|
|
.devices = sdp3430_dss_devices,
|
|
|
|
.default_device = &sdp3430_lcd_device,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct platform_device sdp3430_dss_device = {
|
|
|
|
.name = "omapdss",
|
|
|
|
.id = -1,
|
|
|
|
.dev = {
|
|
|
|
.platform_data = &sdp3430_dss_data,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct regulator_consumer_supply sdp3430_vdda_dac_supply = {
|
|
|
|
.supply = "vdda_dac",
|
|
|
|
.dev = &sdp3430_dss_device.dev,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct platform_device *sdp3430_devices[] __initdata = {
|
|
|
|
&sdp3430_dss_device,
|
2009-03-23 19:38:16 -06:00
|
|
|
};
|
|
|
|
|
|
|
|
static struct omap_board_config_kernel sdp3430_config[] __initdata = {
|
|
|
|
};
|
|
|
|
|
2009-09-03 11:14:02 -06:00
|
|
|
static void __init omap_3430sdp_init_irq(void)
|
|
|
|
{
|
|
|
|
omap_board_config = sdp3430_config;
|
|
|
|
omap_board_config_size = ARRAY_SIZE(sdp3430_config);
|
2009-12-15 17:37:18 -07:00
|
|
|
omap3_pm_init_cpuidle(omap3_cpuidle_params_table);
|
2009-09-03 11:14:02 -06:00
|
|
|
omap2_init_common_hw(hyb18m512160af6_sdrc_params, NULL);
|
|
|
|
omap_init_irq();
|
|
|
|
omap_gpio_init();
|
|
|
|
}
|
|
|
|
|
2009-03-23 19:38:16 -06:00
|
|
|
static int sdp3430_batt_table[] = {
|
|
|
|
/* 0 C*/
|
|
|
|
30800, 29500, 28300, 27100,
|
|
|
|
26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
|
|
|
|
17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
|
|
|
|
11600, 11200, 10800, 10400, 10000, 9630, 9280, 8950, 8620, 8310,
|
|
|
|
8020, 7730, 7460, 7200, 6950, 6710, 6470, 6250, 6040, 5830,
|
|
|
|
5640, 5450, 5260, 5090, 4920, 4760, 4600, 4450, 4310, 4170,
|
|
|
|
4040, 3910, 3790, 3670, 3550
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct twl4030_bci_platform_data sdp3430_bci_data = {
|
|
|
|
.battery_tmp_tbl = sdp3430_batt_table,
|
|
|
|
.tblsize = ARRAY_SIZE(sdp3430_batt_table),
|
|
|
|
};
|
|
|
|
|
2010-02-15 11:03:34 -07:00
|
|
|
static struct omap2_hsmmc_info mmc[] = {
|
2009-03-23 19:38:16 -06:00
|
|
|
{
|
|
|
|
.mmc = 1,
|
|
|
|
/* 8 bits (default) requires S6.3 == ON,
|
|
|
|
* so the SIM card isn't used; else 4 bits.
|
|
|
|
*/
|
2010-09-15 08:49:23 -06:00
|
|
|
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
|
2009-03-23 19:38:16 -06:00
|
|
|
.gpio_wp = 4,
|
|
|
|
},
|
|
|
|
{
|
|
|
|
.mmc = 2,
|
2010-09-15 08:49:23 -06:00
|
|
|
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
|
2009-03-23 19:38:16 -06:00
|
|
|
.gpio_wp = 7,
|
|
|
|
},
|
|
|
|
{} /* Terminator */
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct regulator_consumer_supply sdp3430_vmmc1_supply = {
|
|
|
|
.supply = "vmmc",
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct regulator_consumer_supply sdp3430_vsim_supply = {
|
|
|
|
.supply = "vmmc_aux",
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct regulator_consumer_supply sdp3430_vmmc2_supply = {
|
|
|
|
.supply = "vmmc",
|
|
|
|
};
|
|
|
|
|
|
|
|
static int sdp3430_twl_gpio_setup(struct device *dev,
|
|
|
|
unsigned gpio, unsigned ngpio)
|
|
|
|
{
|
|
|
|
/* gpio + 0 is "mmc0_cd" (input/IRQ),
|
|
|
|
* gpio + 1 is "mmc1_cd" (input/IRQ)
|
|
|
|
*/
|
|
|
|
mmc[0].gpio_cd = gpio + 0;
|
|
|
|
mmc[1].gpio_cd = gpio + 1;
|
2010-02-15 11:03:34 -07:00
|
|
|
omap2_hsmmc_init(mmc);
|
2009-03-23 19:38:16 -06:00
|
|
|
|
|
|
|
/* link regulators to MMC adapters ... we "know" the
|
|
|
|
* regulators will be set up only *after* we return.
|
|
|
|
*/
|
|
|
|
sdp3430_vmmc1_supply.dev = mmc[0].dev;
|
|
|
|
sdp3430_vsim_supply.dev = mmc[0].dev;
|
|
|
|
sdp3430_vmmc2_supply.dev = mmc[1].dev;
|
|
|
|
|
|
|
|
/* gpio + 7 is "sub_lcd_en_bkl" (output/PWM1) */
|
|
|
|
gpio_request(gpio + 7, "sub_lcd_en_bkl");
|
|
|
|
gpio_direction_output(gpio + 7, 0);
|
|
|
|
|
|
|
|
/* gpio + 15 is "sub_lcd_nRST" (output) */
|
|
|
|
gpio_request(gpio + 15, "sub_lcd_nRST");
|
|
|
|
gpio_direction_output(gpio + 15, 0);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct twl4030_gpio_platform_data sdp3430_gpio_data = {
|
|
|
|
.gpio_base = OMAP_MAX_GPIO_LINES,
|
|
|
|
.irq_base = TWL4030_GPIO_IRQ_BASE,
|
|
|
|
.irq_end = TWL4030_GPIO_IRQ_END,
|
|
|
|
.pulldowns = BIT(2) | BIT(6) | BIT(8) | BIT(13)
|
|
|
|
| BIT(16) | BIT(17),
|
|
|
|
.setup = sdp3430_twl_gpio_setup,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct twl4030_usb_data sdp3430_usb_data = {
|
|
|
|
.usb_mode = T2_USB_MODE_ULPI,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct twl4030_madc_platform_data sdp3430_madc_data = {
|
|
|
|
.irq_line = 1,
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Apply all the fixed voltages since most versions of U-Boot
|
|
|
|
* don't bother with that initialization.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/* VAUX1 for mainboard (irda and sub-lcd) */
|
|
|
|
static struct regulator_init_data sdp3430_vaux1 = {
|
|
|
|
.constraints = {
|
|
|
|
.min_uV = 2800000,
|
|
|
|
.max_uV = 2800000,
|
|
|
|
.apply_uV = true,
|
|
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
|
|
| REGULATOR_MODE_STANDBY,
|
|
|
|
.valid_ops_mask = REGULATOR_CHANGE_MODE
|
|
|
|
| REGULATOR_CHANGE_STATUS,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
/* VAUX2 for camera module */
|
|
|
|
static struct regulator_init_data sdp3430_vaux2 = {
|
|
|
|
.constraints = {
|
|
|
|
.min_uV = 2800000,
|
|
|
|
.max_uV = 2800000,
|
|
|
|
.apply_uV = true,
|
|
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
|
|
| REGULATOR_MODE_STANDBY,
|
|
|
|
.valid_ops_mask = REGULATOR_CHANGE_MODE
|
|
|
|
| REGULATOR_CHANGE_STATUS,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
/* VAUX3 for LCD board */
|
|
|
|
static struct regulator_init_data sdp3430_vaux3 = {
|
|
|
|
.constraints = {
|
|
|
|
.min_uV = 2800000,
|
|
|
|
.max_uV = 2800000,
|
|
|
|
.apply_uV = true,
|
|
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
|
|
| REGULATOR_MODE_STANDBY,
|
|
|
|
.valid_ops_mask = REGULATOR_CHANGE_MODE
|
|
|
|
| REGULATOR_CHANGE_STATUS,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
/* VAUX4 for OMAP VDD_CSI2 (camera) */
|
|
|
|
static struct regulator_init_data sdp3430_vaux4 = {
|
|
|
|
.constraints = {
|
|
|
|
.min_uV = 1800000,
|
|
|
|
.max_uV = 1800000,
|
|
|
|
.apply_uV = true,
|
|
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
|
|
| REGULATOR_MODE_STANDBY,
|
|
|
|
.valid_ops_mask = REGULATOR_CHANGE_MODE
|
|
|
|
| REGULATOR_CHANGE_STATUS,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
|
|
|
|
static struct regulator_init_data sdp3430_vmmc1 = {
|
|
|
|
.constraints = {
|
|
|
|
.min_uV = 1850000,
|
|
|
|
.max_uV = 3150000,
|
|
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
|
|
| REGULATOR_MODE_STANDBY,
|
|
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
|
|
|
|
| REGULATOR_CHANGE_MODE
|
|
|
|
| REGULATOR_CHANGE_STATUS,
|
|
|
|
},
|
|
|
|
.num_consumer_supplies = 1,
|
|
|
|
.consumer_supplies = &sdp3430_vmmc1_supply,
|
|
|
|
};
|
|
|
|
|
|
|
|
/* VMMC2 for MMC2 card */
|
|
|
|
static struct regulator_init_data sdp3430_vmmc2 = {
|
|
|
|
.constraints = {
|
|
|
|
.min_uV = 1850000,
|
|
|
|
.max_uV = 1850000,
|
|
|
|
.apply_uV = true,
|
|
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
|
|
| REGULATOR_MODE_STANDBY,
|
|
|
|
.valid_ops_mask = REGULATOR_CHANGE_MODE
|
|
|
|
| REGULATOR_CHANGE_STATUS,
|
|
|
|
},
|
|
|
|
.num_consumer_supplies = 1,
|
|
|
|
.consumer_supplies = &sdp3430_vmmc2_supply,
|
|
|
|
};
|
|
|
|
|
|
|
|
/* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
|
|
|
|
static struct regulator_init_data sdp3430_vsim = {
|
|
|
|
.constraints = {
|
|
|
|
.min_uV = 1800000,
|
|
|
|
.max_uV = 3000000,
|
|
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
|
|
| REGULATOR_MODE_STANDBY,
|
|
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
|
|
|
|
| REGULATOR_CHANGE_MODE
|
|
|
|
| REGULATOR_CHANGE_STATUS,
|
|
|
|
},
|
|
|
|
.num_consumer_supplies = 1,
|
|
|
|
.consumer_supplies = &sdp3430_vsim_supply,
|
|
|
|
};
|
|
|
|
|
|
|
|
/* VDAC for DSS driving S-Video */
|
|
|
|
static struct regulator_init_data sdp3430_vdac = {
|
|
|
|
.constraints = {
|
|
|
|
.min_uV = 1800000,
|
|
|
|
.max_uV = 1800000,
|
|
|
|
.apply_uV = true,
|
|
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
|
|
| REGULATOR_MODE_STANDBY,
|
|
|
|
.valid_ops_mask = REGULATOR_CHANGE_MODE
|
|
|
|
| REGULATOR_CHANGE_STATUS,
|
|
|
|
},
|
|
|
|
.num_consumer_supplies = 1,
|
2009-12-09 09:25:18 -07:00
|
|
|
.consumer_supplies = &sdp3430_vdda_dac_supply,
|
2009-03-23 19:38:16 -06:00
|
|
|
};
|
|
|
|
|
|
|
|
/* VPLL2 for digital video outputs */
|
2009-12-09 09:25:18 -07:00
|
|
|
static struct regulator_consumer_supply sdp3430_vpll2_supplies[] = {
|
|
|
|
{
|
|
|
|
.supply = "vdds_dsi",
|
|
|
|
.dev = &sdp3430_dss_device.dev,
|
|
|
|
}
|
|
|
|
};
|
|
|
|
|
2009-03-23 19:38:16 -06:00
|
|
|
static struct regulator_init_data sdp3430_vpll2 = {
|
|
|
|
.constraints = {
|
|
|
|
.name = "VDVI",
|
|
|
|
.min_uV = 1800000,
|
|
|
|
.max_uV = 1800000,
|
2009-12-09 09:25:18 -07:00
|
|
|
.apply_uV = true,
|
2009-03-23 19:38:16 -06:00
|
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
|
|
| REGULATOR_MODE_STANDBY,
|
|
|
|
.valid_ops_mask = REGULATOR_CHANGE_MODE
|
|
|
|
| REGULATOR_CHANGE_STATUS,
|
|
|
|
},
|
2009-12-09 09:25:18 -07:00
|
|
|
.num_consumer_supplies = ARRAY_SIZE(sdp3430_vpll2_supplies),
|
|
|
|
.consumer_supplies = sdp3430_vpll2_supplies,
|
2009-03-23 19:38:16 -06:00
|
|
|
};
|
|
|
|
|
2009-10-22 04:26:46 -06:00
|
|
|
static struct twl4030_codec_audio_data sdp3430_audio = {
|
|
|
|
.audio_mclk = 26000000,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct twl4030_codec_data sdp3430_codec = {
|
2009-11-04 00:58:18 -07:00
|
|
|
.audio_mclk = 26000000,
|
2009-10-22 04:26:46 -06:00
|
|
|
.audio = &sdp3430_audio,
|
|
|
|
};
|
|
|
|
|
2009-03-23 19:38:16 -06:00
|
|
|
static struct twl4030_platform_data sdp3430_twldata = {
|
|
|
|
.irq_base = TWL4030_IRQ_BASE,
|
|
|
|
.irq_end = TWL4030_IRQ_END,
|
|
|
|
|
|
|
|
/* platform_data for children goes here */
|
|
|
|
.bci = &sdp3430_bci_data,
|
|
|
|
.gpio = &sdp3430_gpio_data,
|
|
|
|
.madc = &sdp3430_madc_data,
|
|
|
|
.keypad = &sdp3430_kp_data,
|
|
|
|
.usb = &sdp3430_usb_data,
|
2009-10-22 04:26:46 -06:00
|
|
|
.codec = &sdp3430_codec,
|
2009-03-23 19:38:16 -06:00
|
|
|
|
|
|
|
.vaux1 = &sdp3430_vaux1,
|
|
|
|
.vaux2 = &sdp3430_vaux2,
|
|
|
|
.vaux3 = &sdp3430_vaux3,
|
|
|
|
.vaux4 = &sdp3430_vaux4,
|
|
|
|
.vmmc1 = &sdp3430_vmmc1,
|
|
|
|
.vmmc2 = &sdp3430_vmmc2,
|
|
|
|
.vsim = &sdp3430_vsim,
|
|
|
|
.vdac = &sdp3430_vdac,
|
|
|
|
.vpll2 = &sdp3430_vpll2,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct i2c_board_info __initdata sdp3430_i2c_boardinfo[] = {
|
|
|
|
{
|
|
|
|
I2C_BOARD_INFO("twl4030", 0x48),
|
|
|
|
.flags = I2C_CLIENT_WAKE,
|
|
|
|
.irq = INT_34XX_SYS_NIRQ,
|
|
|
|
.platform_data = &sdp3430_twldata,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
static int __init omap3430_i2c_init(void)
|
|
|
|
{
|
|
|
|
/* i2c1 for PMIC only */
|
|
|
|
omap_register_i2c_bus(1, 2600, sdp3430_i2c_boardinfo,
|
|
|
|
ARRAY_SIZE(sdp3430_i2c_boardinfo));
|
|
|
|
/* i2c2 on camera connector (for sensor control) and optional isp1301 */
|
|
|
|
omap_register_i2c_bus(2, 400, NULL, 0);
|
|
|
|
/* i2c3 on display connector (for DVI, tfp410) */
|
|
|
|
omap_register_i2c_bus(3, 400, NULL, 0);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2009-05-28 14:23:52 -06:00
|
|
|
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
|
|
|
|
|
|
|
|
static struct omap_smc91x_platform_data board_smc91x_data = {
|
|
|
|
.cs = 3,
|
|
|
|
.flags = GPMC_MUX_ADD_DATA | GPMC_TIMINGS_SMC91C96 |
|
|
|
|
IORESOURCE_IRQ_LOWLEVEL,
|
|
|
|
};
|
|
|
|
|
|
|
|
static void __init board_smc91x_init(void)
|
|
|
|
{
|
|
|
|
if (omap_rev() > OMAP3430_REV_ES1_0)
|
|
|
|
board_smc91x_data.gpio_irq = 6;
|
|
|
|
else
|
|
|
|
board_smc91x_data.gpio_irq = 29;
|
|
|
|
|
|
|
|
gpmc_smc91x_init(&board_smc91x_data);
|
|
|
|
}
|
|
|
|
|
|
|
|
#else
|
|
|
|
|
|
|
|
static inline void board_smc91x_init(void)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
|
|
|
|
#endif
|
|
|
|
|
2009-08-24 00:28:59 -06:00
|
|
|
static void enable_board_wakeup_source(void)
|
|
|
|
{
|
2009-12-11 17:16:32 -07:00
|
|
|
/* T2 interrupt line (keypad) */
|
|
|
|
omap_mux_init_signal("sys_nirq",
|
|
|
|
OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
|
2009-08-24 00:28:59 -06:00
|
|
|
}
|
|
|
|
|
2010-03-04 00:45:53 -07:00
|
|
|
static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
|
2009-11-22 11:11:01 -07:00
|
|
|
|
|
|
|
.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
|
|
|
|
.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
|
|
|
|
.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
|
|
|
|
|
|
|
|
.phy_reset = true,
|
|
|
|
.reset_gpio_port[0] = 57,
|
|
|
|
.reset_gpio_port[1] = 61,
|
|
|
|
.reset_gpio_port[2] = -EINVAL
|
|
|
|
};
|
|
|
|
|
2009-12-11 17:16:32 -07:00
|
|
|
#ifdef CONFIG_OMAP_MUX
|
|
|
|
static struct omap_board_mux board_mux[] __initdata = {
|
|
|
|
{ .reg_offset = OMAP_MUX_TERMINATOR },
|
|
|
|
};
|
|
|
|
#else
|
|
|
|
#define board_mux NULL
|
|
|
|
#endif
|
|
|
|
|
2010-07-09 08:27:47 -06:00
|
|
|
/*
|
|
|
|
* SDP3430 V2 Board CS organization
|
|
|
|
* Different from SDP3430 V1. Now 4 switches used to specify CS
|
|
|
|
*
|
|
|
|
* See also the Switch S8 settings in the comments.
|
|
|
|
*/
|
|
|
|
static char chip_sel_3430[][GPMC_CS_NUM] = {
|
|
|
|
{PDC_NOR, PDC_NAND, PDC_ONENAND, DBG_MPDB, 0, 0, 0, 0}, /* S8:1111 */
|
|
|
|
{PDC_ONENAND, PDC_NAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1110 */
|
|
|
|
{PDC_NAND, PDC_ONENAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1101 */
|
|
|
|
};
|
|
|
|
|
2010-02-15 11:03:34 -07:00
|
|
|
static struct mtd_partition sdp_nor_partitions[] = {
|
|
|
|
/* bootloader (U-Boot, etc) in first sector */
|
|
|
|
{
|
|
|
|
.name = "Bootloader-NOR",
|
|
|
|
.offset = 0,
|
|
|
|
.size = SZ_256K,
|
|
|
|
.mask_flags = MTD_WRITEABLE, /* force read-only */
|
|
|
|
},
|
|
|
|
/* bootloader params in the next sector */
|
|
|
|
{
|
|
|
|
.name = "Params-NOR",
|
|
|
|
.offset = MTDPART_OFS_APPEND,
|
|
|
|
.size = SZ_256K,
|
|
|
|
.mask_flags = 0,
|
|
|
|
},
|
|
|
|
/* kernel */
|
|
|
|
{
|
|
|
|
.name = "Kernel-NOR",
|
|
|
|
.offset = MTDPART_OFS_APPEND,
|
|
|
|
.size = SZ_2M,
|
|
|
|
.mask_flags = 0
|
|
|
|
},
|
|
|
|
/* file system */
|
|
|
|
{
|
|
|
|
.name = "Filesystem-NOR",
|
|
|
|
.offset = MTDPART_OFS_APPEND,
|
|
|
|
.size = MTDPART_SIZ_FULL,
|
|
|
|
.mask_flags = 0
|
|
|
|
}
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct mtd_partition sdp_onenand_partitions[] = {
|
|
|
|
{
|
|
|
|
.name = "X-Loader-OneNAND",
|
|
|
|
.offset = 0,
|
|
|
|
.size = 4 * (64 * 2048),
|
|
|
|
.mask_flags = MTD_WRITEABLE /* force read-only */
|
|
|
|
},
|
|
|
|
{
|
|
|
|
.name = "U-Boot-OneNAND",
|
|
|
|
.offset = MTDPART_OFS_APPEND,
|
|
|
|
.size = 2 * (64 * 2048),
|
|
|
|
.mask_flags = MTD_WRITEABLE /* force read-only */
|
|
|
|
},
|
|
|
|
{
|
|
|
|
.name = "U-Boot Environment-OneNAND",
|
|
|
|
.offset = MTDPART_OFS_APPEND,
|
|
|
|
.size = 1 * (64 * 2048),
|
|
|
|
},
|
|
|
|
{
|
|
|
|
.name = "Kernel-OneNAND",
|
|
|
|
.offset = MTDPART_OFS_APPEND,
|
|
|
|
.size = 16 * (64 * 2048),
|
|
|
|
},
|
|
|
|
{
|
|
|
|
.name = "File System-OneNAND",
|
|
|
|
.offset = MTDPART_OFS_APPEND,
|
|
|
|
.size = MTDPART_SIZ_FULL,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct mtd_partition sdp_nand_partitions[] = {
|
|
|
|
/* All the partition sizes are listed in terms of NAND block size */
|
|
|
|
{
|
|
|
|
.name = "X-Loader-NAND",
|
|
|
|
.offset = 0,
|
|
|
|
.size = 4 * (64 * 2048),
|
|
|
|
.mask_flags = MTD_WRITEABLE, /* force read-only */
|
|
|
|
},
|
|
|
|
{
|
|
|
|
.name = "U-Boot-NAND",
|
|
|
|
.offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */
|
|
|
|
.size = 10 * (64 * 2048),
|
|
|
|
.mask_flags = MTD_WRITEABLE, /* force read-only */
|
|
|
|
},
|
|
|
|
{
|
|
|
|
.name = "Boot Env-NAND",
|
|
|
|
|
|
|
|
.offset = MTDPART_OFS_APPEND, /* Offset = 0x1c0000 */
|
|
|
|
.size = 6 * (64 * 2048),
|
|
|
|
},
|
|
|
|
{
|
|
|
|
.name = "Kernel-NAND",
|
|
|
|
.offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */
|
|
|
|
.size = 40 * (64 * 2048),
|
|
|
|
},
|
|
|
|
{
|
|
|
|
.name = "File System - NAND",
|
|
|
|
.size = MTDPART_SIZ_FULL,
|
|
|
|
.offset = MTDPART_OFS_APPEND, /* Offset = 0x780000 */
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct flash_partitions sdp_flash_partitions[] = {
|
|
|
|
{
|
|
|
|
.parts = sdp_nor_partitions,
|
|
|
|
.nr_parts = ARRAY_SIZE(sdp_nor_partitions),
|
|
|
|
},
|
|
|
|
{
|
|
|
|
.parts = sdp_onenand_partitions,
|
|
|
|
.nr_parts = ARRAY_SIZE(sdp_onenand_partitions),
|
|
|
|
},
|
|
|
|
{
|
|
|
|
.parts = sdp_nand_partitions,
|
|
|
|
.nr_parts = ARRAY_SIZE(sdp_nand_partitions),
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
2010-02-17 15:09:30 -07:00
|
|
|
static struct omap_musb_board_data musb_board_data = {
|
|
|
|
.interface_type = MUSB_INTERFACE_ULPI,
|
|
|
|
.mode = MUSB_OTG,
|
|
|
|
.power = 100,
|
|
|
|
};
|
|
|
|
|
2009-03-23 19:38:16 -06:00
|
|
|
static void __init omap_3430sdp_init(void)
|
|
|
|
{
|
2009-12-11 17:16:32 -07:00
|
|
|
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
|
2009-03-23 19:38:16 -06:00
|
|
|
omap3430_i2c_init();
|
|
|
|
platform_add_devices(sdp3430_devices, ARRAY_SIZE(sdp3430_devices));
|
|
|
|
if (omap_rev() > OMAP3430_REV_ES1_0)
|
|
|
|
ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV2;
|
|
|
|
else
|
|
|
|
ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV1;
|
|
|
|
sdp3430_spi_board_info[0].irq = gpio_to_irq(ts_gpio);
|
|
|
|
spi_register_board_info(sdp3430_spi_board_info,
|
|
|
|
ARRAY_SIZE(sdp3430_spi_board_info));
|
|
|
|
ads7846_dev_init();
|
|
|
|
omap_serial_init();
|
2010-02-17 15:09:30 -07:00
|
|
|
usb_musb_init(&musb_board_data);
|
2009-05-28 14:23:52 -06:00
|
|
|
board_smc91x_init();
|
2010-07-09 08:27:47 -06:00
|
|
|
board_flash_init(sdp_flash_partitions, chip_sel_3430);
|
2009-12-09 09:25:18 -07:00
|
|
|
sdp3430_display_init();
|
2009-08-24 00:28:59 -06:00
|
|
|
enable_board_wakeup_source();
|
2009-11-22 11:11:01 -07:00
|
|
|
usb_ehci_init(&ehci_pdata);
|
2009-03-23 19:38:16 -06:00
|
|
|
}
|
|
|
|
|
|
|
|
MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
|
|
|
|
/* Maintainer: Syed Khasim - Texas Instruments Inc */
|
|
|
|
.boot_params = 0x80000100,
|
2010-08-04 05:43:18 -06:00
|
|
|
.map_io = omap3_map_io,
|
2010-05-23 03:18:16 -06:00
|
|
|
.reserve = omap_reserve,
|
2009-03-23 19:38:16 -06:00
|
|
|
.init_irq = omap_3430sdp_init_irq,
|
|
|
|
.init_machine = omap_3430sdp_init,
|
|
|
|
.timer = &omap_timer,
|
|
|
|
MACHINE_END
|