2009-05-28 15:13:28 -06:00
|
|
|
/*
|
|
|
|
* linux/arch/arm/mach-omap2/board-omap3evm.c
|
|
|
|
*
|
|
|
|
* Copyright (C) 2008 Texas Instruments
|
|
|
|
*
|
|
|
|
* Modified from mach-omap2/board-3430sdp.c
|
|
|
|
*
|
|
|
|
* Initial code: Syed Mohammed Khasim
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
|
|
* published by the Free Software Foundation.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/err.h>
|
|
|
|
#include <linux/clk.h>
|
|
|
|
#include <linux/gpio.h>
|
|
|
|
#include <linux/input.h>
|
2009-10-22 15:43:17 -06:00
|
|
|
#include <linux/input/matrix_keypad.h>
|
2009-05-28 15:13:28 -06:00
|
|
|
#include <linux/leds.h>
|
2009-11-22 11:11:30 -07:00
|
|
|
#include <linux/interrupt.h>
|
2009-05-28 15:13:28 -06:00
|
|
|
|
|
|
|
#include <linux/spi/spi.h>
|
|
|
|
#include <linux/spi/ads7846.h>
|
2009-12-15 07:39:02 -07:00
|
|
|
#include <linux/i2c/twl.h>
|
2009-07-29 00:28:57 -06:00
|
|
|
#include <linux/usb/otg.h>
|
2009-11-22 11:11:30 -07:00
|
|
|
#include <linux/smsc911x.h>
|
2009-05-28 15:13:28 -06:00
|
|
|
|
2009-11-22 11:11:29 -07:00
|
|
|
#include <linux/regulator/machine.h>
|
2010-09-15 08:49:23 -06:00
|
|
|
#include <linux/mmc/host.h>
|
2009-11-22 11:11:29 -07:00
|
|
|
|
2009-05-28 15:13:28 -06:00
|
|
|
#include <mach/hardware.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
|
|
#include <asm/mach/arch.h>
|
|
|
|
#include <asm/mach/map.h>
|
|
|
|
|
2009-10-20 10:40:47 -06:00
|
|
|
#include <plat/board.h>
|
|
|
|
#include <plat/usb.h>
|
|
|
|
#include <plat/common.h>
|
|
|
|
#include <plat/mcspi.h>
|
2010-01-04 07:34:16 -07:00
|
|
|
#include <plat/display.h>
|
2009-05-28 15:13:28 -06:00
|
|
|
|
2009-12-11 17:16:32 -07:00
|
|
|
#include "mux.h"
|
2009-05-28 15:13:28 -06:00
|
|
|
#include "sdram-micron-mt46h32m32lf-6.h"
|
2010-02-15 11:03:34 -07:00
|
|
|
#include "hsmmc.h"
|
2009-05-28 15:13:28 -06:00
|
|
|
|
|
|
|
#define OMAP3_EVM_TS_GPIO 175
|
2009-11-22 11:11:28 -07:00
|
|
|
#define OMAP3_EVM_EHCI_VBUS 22
|
|
|
|
#define OMAP3_EVM_EHCI_SELECT 61
|
2009-05-28 15:13:28 -06:00
|
|
|
|
|
|
|
#define OMAP3EVM_ETHR_START 0x2c000000
|
|
|
|
#define OMAP3EVM_ETHR_SIZE 1024
|
2009-11-22 11:11:27 -07:00
|
|
|
#define OMAP3EVM_ETHR_ID_REV 0x50
|
2009-05-28 15:13:28 -06:00
|
|
|
#define OMAP3EVM_ETHR_GPIO_IRQ 176
|
2009-11-22 11:11:30 -07:00
|
|
|
#define OMAP3EVM_SMSC911X_CS 5
|
2009-05-28 15:13:28 -06:00
|
|
|
|
2009-11-22 11:11:27 -07:00
|
|
|
static u8 omap3_evm_version;
|
|
|
|
|
|
|
|
u8 get_omap3_evm_rev(void)
|
|
|
|
{
|
|
|
|
return omap3_evm_version;
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(get_omap3_evm_rev);
|
|
|
|
|
|
|
|
static void __init omap3_evm_get_revision(void)
|
|
|
|
{
|
|
|
|
void __iomem *ioaddr;
|
|
|
|
unsigned int smsc_id;
|
|
|
|
|
|
|
|
/* Ethernet PHY ID is stored at ID_REV register */
|
|
|
|
ioaddr = ioremap_nocache(OMAP3EVM_ETHR_START, SZ_1K);
|
|
|
|
if (!ioaddr)
|
|
|
|
return;
|
|
|
|
smsc_id = readl(ioaddr + OMAP3EVM_ETHR_ID_REV) & 0xFFFF0000;
|
|
|
|
iounmap(ioaddr);
|
|
|
|
|
|
|
|
switch (smsc_id) {
|
|
|
|
/*SMSC9115 chipset*/
|
|
|
|
case 0x01150000:
|
|
|
|
omap3_evm_version = OMAP3EVM_BOARD_GEN_1;
|
|
|
|
break;
|
|
|
|
/*SMSC 9220 chipset*/
|
|
|
|
case 0x92200000:
|
|
|
|
default:
|
|
|
|
omap3_evm_version = OMAP3EVM_BOARD_GEN_2;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2009-11-22 11:11:30 -07:00
|
|
|
#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
|
|
|
|
static struct resource omap3evm_smsc911x_resources[] = {
|
2009-05-28 15:13:28 -06:00
|
|
|
[0] = {
|
|
|
|
.start = OMAP3EVM_ETHR_START,
|
|
|
|
.end = (OMAP3EVM_ETHR_START + OMAP3EVM_ETHR_SIZE - 1),
|
|
|
|
.flags = IORESOURCE_MEM,
|
|
|
|
},
|
|
|
|
[1] = {
|
|
|
|
.start = OMAP_GPIO_IRQ(OMAP3EVM_ETHR_GPIO_IRQ),
|
|
|
|
.end = OMAP_GPIO_IRQ(OMAP3EVM_ETHR_GPIO_IRQ),
|
2009-11-22 11:11:30 -07:00
|
|
|
.flags = (IORESOURCE_IRQ | IRQF_TRIGGER_LOW),
|
2009-05-28 15:13:28 -06:00
|
|
|
},
|
|
|
|
};
|
|
|
|
|
2009-11-22 11:11:30 -07:00
|
|
|
static struct smsc911x_platform_config smsc911x_config = {
|
|
|
|
.phy_interface = PHY_INTERFACE_MODE_MII,
|
|
|
|
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
|
|
|
|
.irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
|
|
|
|
.flags = (SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS),
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct platform_device omap3evm_smsc911x_device = {
|
|
|
|
.name = "smsc911x",
|
2009-05-28 15:13:28 -06:00
|
|
|
.id = -1,
|
2009-11-22 11:11:30 -07:00
|
|
|
.num_resources = ARRAY_SIZE(omap3evm_smsc911x_resources),
|
|
|
|
.resource = &omap3evm_smsc911x_resources[0],
|
|
|
|
.dev = {
|
|
|
|
.platform_data = &smsc911x_config,
|
|
|
|
},
|
2009-05-28 15:13:28 -06:00
|
|
|
};
|
|
|
|
|
2009-11-22 11:11:30 -07:00
|
|
|
static inline void __init omap3evm_init_smsc911x(void)
|
2009-05-28 15:13:28 -06:00
|
|
|
{
|
|
|
|
int eth_cs;
|
|
|
|
struct clk *l3ck;
|
|
|
|
unsigned int rate;
|
|
|
|
|
2009-11-22 11:11:30 -07:00
|
|
|
eth_cs = OMAP3EVM_SMSC911X_CS;
|
2009-05-28 15:13:28 -06:00
|
|
|
|
|
|
|
l3ck = clk_get(NULL, "l3_ck");
|
|
|
|
if (IS_ERR(l3ck))
|
|
|
|
rate = 100000000;
|
|
|
|
else
|
|
|
|
rate = clk_get_rate(l3ck);
|
|
|
|
|
2009-11-22 11:11:30 -07:00
|
|
|
if (gpio_request(OMAP3EVM_ETHR_GPIO_IRQ, "SMSC911x irq") < 0) {
|
|
|
|
printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n",
|
2009-05-28 15:13:28 -06:00
|
|
|
OMAP3EVM_ETHR_GPIO_IRQ);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
gpio_direction_input(OMAP3EVM_ETHR_GPIO_IRQ);
|
2009-11-22 11:11:30 -07:00
|
|
|
platform_device_register(&omap3evm_smsc911x_device);
|
2009-05-28 15:13:28 -06:00
|
|
|
}
|
|
|
|
|
2009-11-22 11:11:30 -07:00
|
|
|
#else
|
|
|
|
static inline void __init omap3evm_init_smsc911x(void) { return; }
|
|
|
|
#endif
|
|
|
|
|
2010-01-04 07:34:16 -07:00
|
|
|
/*
|
|
|
|
* OMAP3EVM LCD Panel control signals
|
|
|
|
*/
|
|
|
|
#define OMAP3EVM_LCD_PANEL_LR 2
|
|
|
|
#define OMAP3EVM_LCD_PANEL_UD 3
|
|
|
|
#define OMAP3EVM_LCD_PANEL_INI 152
|
|
|
|
#define OMAP3EVM_LCD_PANEL_ENVDD 153
|
|
|
|
#define OMAP3EVM_LCD_PANEL_QVGA 154
|
|
|
|
#define OMAP3EVM_LCD_PANEL_RESB 155
|
|
|
|
#define OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO 210
|
|
|
|
#define OMAP3EVM_DVI_PANEL_EN_GPIO 199
|
|
|
|
|
|
|
|
static int lcd_enabled;
|
|
|
|
static int dvi_enabled;
|
|
|
|
|
|
|
|
static void __init omap3_evm_display_init(void)
|
|
|
|
{
|
|
|
|
int r;
|
|
|
|
|
|
|
|
r = gpio_request(OMAP3EVM_LCD_PANEL_RESB, "lcd_panel_resb");
|
|
|
|
if (r) {
|
|
|
|
printk(KERN_ERR "failed to get lcd_panel_resb\n");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
gpio_direction_output(OMAP3EVM_LCD_PANEL_RESB, 1);
|
|
|
|
|
|
|
|
r = gpio_request(OMAP3EVM_LCD_PANEL_INI, "lcd_panel_ini");
|
|
|
|
if (r) {
|
|
|
|
printk(KERN_ERR "failed to get lcd_panel_ini\n");
|
|
|
|
goto err_1;
|
|
|
|
}
|
|
|
|
gpio_direction_output(OMAP3EVM_LCD_PANEL_INI, 1);
|
|
|
|
|
|
|
|
r = gpio_request(OMAP3EVM_LCD_PANEL_QVGA, "lcd_panel_qvga");
|
|
|
|
if (r) {
|
|
|
|
printk(KERN_ERR "failed to get lcd_panel_qvga\n");
|
|
|
|
goto err_2;
|
|
|
|
}
|
|
|
|
gpio_direction_output(OMAP3EVM_LCD_PANEL_QVGA, 0);
|
|
|
|
|
|
|
|
r = gpio_request(OMAP3EVM_LCD_PANEL_LR, "lcd_panel_lr");
|
|
|
|
if (r) {
|
|
|
|
printk(KERN_ERR "failed to get lcd_panel_lr\n");
|
|
|
|
goto err_3;
|
|
|
|
}
|
|
|
|
gpio_direction_output(OMAP3EVM_LCD_PANEL_LR, 1);
|
|
|
|
|
|
|
|
r = gpio_request(OMAP3EVM_LCD_PANEL_UD, "lcd_panel_ud");
|
|
|
|
if (r) {
|
|
|
|
printk(KERN_ERR "failed to get lcd_panel_ud\n");
|
|
|
|
goto err_4;
|
|
|
|
}
|
|
|
|
gpio_direction_output(OMAP3EVM_LCD_PANEL_UD, 1);
|
|
|
|
|
|
|
|
r = gpio_request(OMAP3EVM_LCD_PANEL_ENVDD, "lcd_panel_envdd");
|
|
|
|
if (r) {
|
|
|
|
printk(KERN_ERR "failed to get lcd_panel_envdd\n");
|
|
|
|
goto err_5;
|
|
|
|
}
|
|
|
|
gpio_direction_output(OMAP3EVM_LCD_PANEL_ENVDD, 0);
|
|
|
|
|
|
|
|
return;
|
|
|
|
|
|
|
|
err_5:
|
|
|
|
gpio_free(OMAP3EVM_LCD_PANEL_UD);
|
|
|
|
err_4:
|
|
|
|
gpio_free(OMAP3EVM_LCD_PANEL_LR);
|
|
|
|
err_3:
|
|
|
|
gpio_free(OMAP3EVM_LCD_PANEL_QVGA);
|
|
|
|
err_2:
|
|
|
|
gpio_free(OMAP3EVM_LCD_PANEL_INI);
|
|
|
|
err_1:
|
|
|
|
gpio_free(OMAP3EVM_LCD_PANEL_RESB);
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
static int omap3_evm_enable_lcd(struct omap_dss_device *dssdev)
|
|
|
|
{
|
|
|
|
if (dvi_enabled) {
|
|
|
|
printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
gpio_set_value(OMAP3EVM_LCD_PANEL_ENVDD, 0);
|
|
|
|
|
|
|
|
if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2)
|
|
|
|
gpio_set_value(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 0);
|
|
|
|
else
|
|
|
|
gpio_set_value(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1);
|
|
|
|
|
|
|
|
lcd_enabled = 1;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void omap3_evm_disable_lcd(struct omap_dss_device *dssdev)
|
|
|
|
{
|
|
|
|
gpio_set_value(OMAP3EVM_LCD_PANEL_ENVDD, 1);
|
|
|
|
|
|
|
|
if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2)
|
|
|
|
gpio_set_value(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1);
|
|
|
|
else
|
|
|
|
gpio_set_value(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 0);
|
|
|
|
|
|
|
|
lcd_enabled = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct omap_dss_device omap3_evm_lcd_device = {
|
|
|
|
.name = "lcd",
|
|
|
|
.driver_name = "sharp_ls_panel",
|
|
|
|
.type = OMAP_DISPLAY_TYPE_DPI,
|
|
|
|
.phy.dpi.data_lines = 18,
|
|
|
|
.platform_enable = omap3_evm_enable_lcd,
|
|
|
|
.platform_disable = omap3_evm_disable_lcd,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int omap3_evm_enable_tv(struct omap_dss_device *dssdev)
|
|
|
|
{
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void omap3_evm_disable_tv(struct omap_dss_device *dssdev)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct omap_dss_device omap3_evm_tv_device = {
|
|
|
|
.name = "tv",
|
|
|
|
.driver_name = "venc",
|
|
|
|
.type = OMAP_DISPLAY_TYPE_VENC,
|
|
|
|
.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
|
|
|
|
.platform_enable = omap3_evm_enable_tv,
|
|
|
|
.platform_disable = omap3_evm_disable_tv,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int omap3_evm_enable_dvi(struct omap_dss_device *dssdev)
|
|
|
|
{
|
|
|
|
if (lcd_enabled) {
|
|
|
|
printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
gpio_set_value(OMAP3EVM_DVI_PANEL_EN_GPIO, 1);
|
|
|
|
|
|
|
|
dvi_enabled = 1;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void omap3_evm_disable_dvi(struct omap_dss_device *dssdev)
|
|
|
|
{
|
|
|
|
gpio_set_value(OMAP3EVM_DVI_PANEL_EN_GPIO, 0);
|
|
|
|
|
|
|
|
dvi_enabled = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct omap_dss_device omap3_evm_dvi_device = {
|
|
|
|
.name = "dvi",
|
|
|
|
.driver_name = "generic_panel",
|
|
|
|
.type = OMAP_DISPLAY_TYPE_DPI,
|
|
|
|
.phy.dpi.data_lines = 24,
|
|
|
|
.platform_enable = omap3_evm_enable_dvi,
|
|
|
|
.platform_disable = omap3_evm_disable_dvi,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct omap_dss_device *omap3_evm_dss_devices[] = {
|
|
|
|
&omap3_evm_lcd_device,
|
|
|
|
&omap3_evm_tv_device,
|
|
|
|
&omap3_evm_dvi_device,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct omap_dss_board_info omap3_evm_dss_data = {
|
|
|
|
.num_devices = ARRAY_SIZE(omap3_evm_dss_devices),
|
|
|
|
.devices = omap3_evm_dss_devices,
|
|
|
|
.default_device = &omap3_evm_lcd_device,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct platform_device omap3_evm_dss_device = {
|
|
|
|
.name = "omapdss",
|
|
|
|
.id = -1,
|
|
|
|
.dev = {
|
|
|
|
.platform_data = &omap3_evm_dss_data,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
2009-11-22 11:11:29 -07:00
|
|
|
static struct regulator_consumer_supply omap3evm_vmmc1_supply = {
|
|
|
|
.supply = "vmmc",
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct regulator_consumer_supply omap3evm_vsim_supply = {
|
|
|
|
.supply = "vmmc_aux",
|
|
|
|
};
|
|
|
|
|
|
|
|
/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
|
|
|
|
static struct regulator_init_data omap3evm_vmmc1 = {
|
|
|
|
.constraints = {
|
|
|
|
.min_uV = 1850000,
|
|
|
|
.max_uV = 3150000,
|
|
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
|
|
| REGULATOR_MODE_STANDBY,
|
|
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
|
|
|
|
| REGULATOR_CHANGE_MODE
|
|
|
|
| REGULATOR_CHANGE_STATUS,
|
|
|
|
},
|
|
|
|
.num_consumer_supplies = 1,
|
|
|
|
.consumer_supplies = &omap3evm_vmmc1_supply,
|
|
|
|
};
|
|
|
|
|
|
|
|
/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
|
|
|
|
static struct regulator_init_data omap3evm_vsim = {
|
|
|
|
.constraints = {
|
|
|
|
.min_uV = 1800000,
|
|
|
|
.max_uV = 3000000,
|
|
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
|
|
| REGULATOR_MODE_STANDBY,
|
|
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
|
|
|
|
| REGULATOR_CHANGE_MODE
|
|
|
|
| REGULATOR_CHANGE_STATUS,
|
|
|
|
},
|
|
|
|
.num_consumer_supplies = 1,
|
|
|
|
.consumer_supplies = &omap3evm_vsim_supply,
|
|
|
|
};
|
|
|
|
|
2010-02-15 11:03:34 -07:00
|
|
|
static struct omap2_hsmmc_info mmc[] = {
|
2009-05-28 15:13:28 -06:00
|
|
|
{
|
|
|
|
.mmc = 1,
|
2010-09-15 08:49:23 -06:00
|
|
|
.caps = MMC_CAP_4_BIT_DATA,
|
2009-05-28 15:13:28 -06:00
|
|
|
.gpio_cd = -EINVAL,
|
|
|
|
.gpio_wp = 63,
|
|
|
|
},
|
|
|
|
{} /* Terminator */
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct gpio_led gpio_leds[] = {
|
|
|
|
{
|
|
|
|
.name = "omap3evm::ledb",
|
|
|
|
/* normally not visible (board underside) */
|
|
|
|
.default_trigger = "default-on",
|
|
|
|
.gpio = -EINVAL, /* gets replaced */
|
|
|
|
.active_low = true,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct gpio_led_platform_data gpio_led_info = {
|
|
|
|
.leds = gpio_leds,
|
|
|
|
.num_leds = ARRAY_SIZE(gpio_leds),
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct platform_device leds_gpio = {
|
|
|
|
.name = "leds-gpio",
|
|
|
|
.id = -1,
|
|
|
|
.dev = {
|
|
|
|
.platform_data = &gpio_led_info,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
|
|
static int omap3evm_twl_gpio_setup(struct device *dev,
|
|
|
|
unsigned gpio, unsigned ngpio)
|
|
|
|
{
|
|
|
|
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
|
2009-12-11 17:16:32 -07:00
|
|
|
omap_mux_init_gpio(63, OMAP_PIN_INPUT);
|
2009-05-28 15:13:28 -06:00
|
|
|
mmc[0].gpio_cd = gpio + 0;
|
2010-02-15 11:03:34 -07:00
|
|
|
omap2_hsmmc_init(mmc);
|
2009-05-28 15:13:28 -06:00
|
|
|
|
2009-11-22 11:11:29 -07:00
|
|
|
/* link regulators to MMC adapters */
|
|
|
|
omap3evm_vmmc1_supply.dev = mmc[0].dev;
|
|
|
|
omap3evm_vsim_supply.dev = mmc[0].dev;
|
|
|
|
|
2009-05-28 15:13:28 -06:00
|
|
|
/*
|
|
|
|
* Most GPIOs are for USB OTG. Some are mostly sent to
|
|
|
|
* the P2 connector; notably LEDA for the LCD backlight.
|
|
|
|
*/
|
|
|
|
|
2010-01-04 07:34:16 -07:00
|
|
|
/* TWL4030_GPIO_MAX + 0 == ledA, LCD Backlight control */
|
|
|
|
gpio_request(gpio + TWL4030_GPIO_MAX, "EN_LCD_BKL");
|
|
|
|
gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
|
|
|
|
|
|
|
|
/* gpio + 7 == DVI Enable */
|
|
|
|
gpio_request(gpio + 7, "EN_DVI");
|
|
|
|
gpio_direction_output(gpio + 7, 0);
|
|
|
|
|
2009-05-28 15:13:28 -06:00
|
|
|
/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
|
|
|
|
gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
|
|
|
|
|
|
|
|
platform_device_register(&leds_gpio);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct twl4030_gpio_platform_data omap3evm_gpio_data = {
|
|
|
|
.gpio_base = OMAP_MAX_GPIO_LINES,
|
|
|
|
.irq_base = TWL4030_GPIO_IRQ_BASE,
|
|
|
|
.irq_end = TWL4030_GPIO_IRQ_END,
|
|
|
|
.use_leds = true,
|
|
|
|
.setup = omap3evm_twl_gpio_setup,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct twl4030_usb_data omap3evm_usb_data = {
|
|
|
|
.usb_mode = T2_USB_MODE_ULPI,
|
|
|
|
};
|
|
|
|
|
2010-10-08 11:01:13 -06:00
|
|
|
static uint32_t board_keymap[] = {
|
2009-05-28 15:13:28 -06:00
|
|
|
KEY(0, 0, KEY_LEFT),
|
2010-02-17 15:09:24 -07:00
|
|
|
KEY(0, 1, KEY_DOWN),
|
|
|
|
KEY(0, 2, KEY_ENTER),
|
|
|
|
KEY(0, 3, KEY_M),
|
|
|
|
|
|
|
|
KEY(1, 0, KEY_RIGHT),
|
2009-05-28 15:13:28 -06:00
|
|
|
KEY(1, 1, KEY_UP),
|
2010-02-17 15:09:24 -07:00
|
|
|
KEY(1, 2, KEY_I),
|
|
|
|
KEY(1, 3, KEY_N),
|
|
|
|
|
|
|
|
KEY(2, 0, KEY_A),
|
|
|
|
KEY(2, 1, KEY_E),
|
2009-05-28 15:13:28 -06:00
|
|
|
KEY(2, 2, KEY_J),
|
2010-02-17 15:09:24 -07:00
|
|
|
KEY(2, 3, KEY_O),
|
|
|
|
|
|
|
|
KEY(3, 0, KEY_B),
|
|
|
|
KEY(3, 1, KEY_F),
|
|
|
|
KEY(3, 2, KEY_K),
|
2009-05-28 15:13:28 -06:00
|
|
|
KEY(3, 3, KEY_P)
|
|
|
|
};
|
|
|
|
|
2009-09-24 17:23:16 -06:00
|
|
|
static struct matrix_keymap_data board_map_data = {
|
|
|
|
.keymap = board_keymap,
|
|
|
|
.keymap_size = ARRAY_SIZE(board_keymap),
|
|
|
|
};
|
|
|
|
|
2009-05-28 15:13:28 -06:00
|
|
|
static struct twl4030_keypad_data omap3evm_kp_data = {
|
2009-09-24 17:23:16 -06:00
|
|
|
.keymap_data = &board_map_data,
|
2009-05-28 15:13:28 -06:00
|
|
|
.rows = 4,
|
|
|
|
.cols = 4,
|
|
|
|
.rep = 1,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct twl4030_madc_platform_data omap3evm_madc_data = {
|
|
|
|
.irq_line = 1,
|
|
|
|
};
|
|
|
|
|
2009-10-22 04:26:46 -06:00
|
|
|
static struct twl4030_codec_audio_data omap3evm_audio_data = {
|
|
|
|
.audio_mclk = 26000000,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct twl4030_codec_data omap3evm_codec_data = {
|
2009-11-04 00:58:18 -07:00
|
|
|
.audio_mclk = 26000000,
|
2009-10-22 04:26:46 -06:00
|
|
|
.audio = &omap3evm_audio_data,
|
|
|
|
};
|
|
|
|
|
2010-01-04 07:34:16 -07:00
|
|
|
static struct regulator_consumer_supply omap3_evm_vdda_dac_supply = {
|
|
|
|
.supply = "vdda_dac",
|
|
|
|
.dev = &omap3_evm_dss_device.dev,
|
|
|
|
};
|
|
|
|
|
|
|
|
/* VDAC for DSS driving S-Video */
|
|
|
|
static struct regulator_init_data omap3_evm_vdac = {
|
|
|
|
.constraints = {
|
|
|
|
.min_uV = 1800000,
|
|
|
|
.max_uV = 1800000,
|
|
|
|
.apply_uV = true,
|
|
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
|
|
| REGULATOR_MODE_STANDBY,
|
|
|
|
.valid_ops_mask = REGULATOR_CHANGE_MODE
|
|
|
|
| REGULATOR_CHANGE_STATUS,
|
|
|
|
},
|
|
|
|
.num_consumer_supplies = 1,
|
|
|
|
.consumer_supplies = &omap3_evm_vdda_dac_supply,
|
|
|
|
};
|
|
|
|
|
|
|
|
/* VPLL2 for digital video outputs */
|
2010-03-19 05:21:19 -06:00
|
|
|
static struct regulator_consumer_supply omap3_evm_vpll2_supply =
|
|
|
|
REGULATOR_SUPPLY("vdds_dsi", "omapdss");
|
2010-01-04 07:34:16 -07:00
|
|
|
|
|
|
|
static struct regulator_init_data omap3_evm_vpll2 = {
|
|
|
|
.constraints = {
|
|
|
|
.min_uV = 1800000,
|
|
|
|
.max_uV = 1800000,
|
|
|
|
.apply_uV = true,
|
|
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
|
|
| REGULATOR_MODE_STANDBY,
|
|
|
|
.valid_ops_mask = REGULATOR_CHANGE_MODE
|
|
|
|
| REGULATOR_CHANGE_STATUS,
|
|
|
|
},
|
|
|
|
.num_consumer_supplies = 1,
|
|
|
|
.consumer_supplies = &omap3_evm_vpll2_supply,
|
|
|
|
};
|
|
|
|
|
2009-05-28 15:13:28 -06:00
|
|
|
static struct twl4030_platform_data omap3evm_twldata = {
|
|
|
|
.irq_base = TWL4030_IRQ_BASE,
|
|
|
|
.irq_end = TWL4030_IRQ_END,
|
|
|
|
|
|
|
|
/* platform_data for children goes here */
|
|
|
|
.keypad = &omap3evm_kp_data,
|
|
|
|
.madc = &omap3evm_madc_data,
|
|
|
|
.usb = &omap3evm_usb_data,
|
|
|
|
.gpio = &omap3evm_gpio_data,
|
2009-10-22 04:26:46 -06:00
|
|
|
.codec = &omap3evm_codec_data,
|
2010-01-04 07:34:16 -07:00
|
|
|
.vdac = &omap3_evm_vdac,
|
|
|
|
.vpll2 = &omap3_evm_vpll2,
|
2009-05-28 15:13:28 -06:00
|
|
|
};
|
|
|
|
|
|
|
|
static struct i2c_board_info __initdata omap3evm_i2c_boardinfo[] = {
|
|
|
|
{
|
|
|
|
I2C_BOARD_INFO("twl4030", 0x48),
|
|
|
|
.flags = I2C_CLIENT_WAKE,
|
|
|
|
.irq = INT_34XX_SYS_NIRQ,
|
|
|
|
.platform_data = &omap3evm_twldata,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
static int __init omap3_evm_i2c_init(void)
|
|
|
|
{
|
2009-11-22 11:11:29 -07:00
|
|
|
/*
|
|
|
|
* REVISIT: These entries can be set in omap3evm_twl_data
|
|
|
|
* after a merge with MFD tree
|
|
|
|
*/
|
|
|
|
omap3evm_twldata.vmmc1 = &omap3evm_vmmc1;
|
|
|
|
omap3evm_twldata.vsim = &omap3evm_vsim;
|
|
|
|
|
2009-05-28 15:13:28 -06:00
|
|
|
omap_register_i2c_bus(1, 2600, omap3evm_i2c_boardinfo,
|
|
|
|
ARRAY_SIZE(omap3evm_i2c_boardinfo));
|
|
|
|
omap_register_i2c_bus(2, 400, NULL, 0);
|
|
|
|
omap_register_i2c_bus(3, 400, NULL, 0);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ads7846_dev_init(void)
|
|
|
|
{
|
|
|
|
if (gpio_request(OMAP3_EVM_TS_GPIO, "ADS7846 pendown") < 0)
|
|
|
|
printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
|
|
|
|
|
|
|
|
gpio_direction_input(OMAP3_EVM_TS_GPIO);
|
2010-05-26 15:42:24 -06:00
|
|
|
gpio_set_debounce(OMAP3_EVM_TS_GPIO, 310);
|
2009-05-28 15:13:28 -06:00
|
|
|
}
|
|
|
|
|
|
|
|
static int ads7846_get_pendown_state(void)
|
|
|
|
{
|
|
|
|
return !gpio_get_value(OMAP3_EVM_TS_GPIO);
|
|
|
|
}
|
|
|
|
|
2010-10-08 10:56:37 -06:00
|
|
|
static struct ads7846_platform_data ads7846_config = {
|
2009-05-28 15:13:28 -06:00
|
|
|
.x_max = 0x0fff,
|
|
|
|
.y_max = 0x0fff,
|
|
|
|
.x_plate_ohms = 180,
|
|
|
|
.pressure_max = 255,
|
|
|
|
.debounce_max = 10,
|
|
|
|
.debounce_tol = 3,
|
|
|
|
.debounce_rep = 1,
|
|
|
|
.get_pendown_state = ads7846_get_pendown_state,
|
|
|
|
.keep_vref_on = 1,
|
|
|
|
.settle_delay_usecs = 150,
|
2010-05-08 01:09:21 -06:00
|
|
|
.wakeup = true,
|
2009-05-28 15:13:28 -06:00
|
|
|
};
|
|
|
|
|
|
|
|
static struct omap2_mcspi_device_config ads7846_mcspi_config = {
|
|
|
|
.turbo_mode = 0,
|
|
|
|
.single_channel = 1, /* 0: slave, 1: master */
|
|
|
|
};
|
|
|
|
|
2010-10-08 10:56:37 -06:00
|
|
|
static struct spi_board_info omap3evm_spi_board_info[] = {
|
2009-05-28 15:13:28 -06:00
|
|
|
[0] = {
|
|
|
|
.modalias = "ads7846",
|
|
|
|
.bus_num = 1,
|
|
|
|
.chip_select = 0,
|
|
|
|
.max_speed_hz = 1500000,
|
|
|
|
.controller_data = &ads7846_mcspi_config,
|
|
|
|
.irq = OMAP_GPIO_IRQ(OMAP3_EVM_TS_GPIO),
|
|
|
|
.platform_data = &ads7846_config,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
2009-09-03 11:14:02 -06:00
|
|
|
static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
|
|
|
|
};
|
|
|
|
|
2009-05-28 15:13:28 -06:00
|
|
|
static void __init omap3_evm_init_irq(void)
|
|
|
|
{
|
2009-09-03 11:14:02 -06:00
|
|
|
omap_board_config = omap3_evm_config;
|
|
|
|
omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
|
2009-07-24 19:43:25 -06:00
|
|
|
omap2_init_common_hw(mt46h32m32lf6_sdrc_params, NULL);
|
2009-05-28 15:13:28 -06:00
|
|
|
omap_init_irq();
|
|
|
|
omap_gpio_init();
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct platform_device *omap3_evm_devices[] __initdata = {
|
2010-01-04 07:34:16 -07:00
|
|
|
&omap3_evm_dss_device,
|
2009-05-28 15:13:28 -06:00
|
|
|
};
|
|
|
|
|
2010-03-04 00:45:53 -07:00
|
|
|
static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = {
|
2009-11-22 11:11:01 -07:00
|
|
|
|
|
|
|
.port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
|
|
|
|
.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
|
|
|
|
.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
|
|
|
|
|
|
|
|
.phy_reset = true,
|
2009-11-22 11:11:28 -07:00
|
|
|
/* PHY reset GPIO will be runtime programmed based on EVM version */
|
2009-11-22 11:11:01 -07:00
|
|
|
.reset_gpio_port[0] = -EINVAL,
|
2009-11-22 11:11:28 -07:00
|
|
|
.reset_gpio_port[1] = -EINVAL,
|
2009-11-22 11:11:01 -07:00
|
|
|
.reset_gpio_port[2] = -EINVAL
|
|
|
|
};
|
|
|
|
|
2009-12-11 17:16:32 -07:00
|
|
|
#ifdef CONFIG_OMAP_MUX
|
|
|
|
static struct omap_board_mux board_mux[] __initdata = {
|
2010-02-17 15:09:23 -07:00
|
|
|
OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP |
|
2010-05-03 05:37:51 -06:00
|
|
|
OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW |
|
2010-02-17 15:09:23 -07:00
|
|
|
OMAP_PIN_OFF_WAKEUPENABLE),
|
2010-02-17 15:09:24 -07:00
|
|
|
OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
|
2010-05-08 01:09:21 -06:00
|
|
|
OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW),
|
2009-12-11 17:16:32 -07:00
|
|
|
{ .reg_offset = OMAP_MUX_TERMINATOR },
|
|
|
|
};
|
|
|
|
#else
|
|
|
|
#define board_mux NULL
|
|
|
|
#endif
|
|
|
|
|
2010-02-17 15:09:30 -07:00
|
|
|
static struct omap_musb_board_data musb_board_data = {
|
|
|
|
.interface_type = MUSB_INTERFACE_ULPI,
|
|
|
|
.mode = MUSB_OTG,
|
|
|
|
.power = 100,
|
|
|
|
};
|
|
|
|
|
2009-05-28 15:13:28 -06:00
|
|
|
static void __init omap3_evm_init(void)
|
|
|
|
{
|
2009-11-22 11:11:27 -07:00
|
|
|
omap3_evm_get_revision();
|
2009-12-11 17:16:32 -07:00
|
|
|
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
|
2009-11-22 11:11:27 -07:00
|
|
|
|
2009-05-28 15:13:28 -06:00
|
|
|
omap3_evm_i2c_init();
|
|
|
|
|
|
|
|
platform_add_devices(omap3_evm_devices, ARRAY_SIZE(omap3_evm_devices));
|
|
|
|
|
|
|
|
spi_register_board_info(omap3evm_spi_board_info,
|
|
|
|
ARRAY_SIZE(omap3evm_spi_board_info));
|
|
|
|
|
|
|
|
omap_serial_init();
|
2010-02-17 15:09:29 -07:00
|
|
|
|
2009-07-29 00:28:57 -06:00
|
|
|
/* OMAP3EVM uses ISP1504 phy and so register nop transceiver */
|
|
|
|
usb_nop_xceiv_register();
|
2010-02-17 15:09:29 -07:00
|
|
|
|
2009-11-22 11:11:28 -07:00
|
|
|
if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) {
|
|
|
|
/* enable EHCI VBUS using GPIO22 */
|
2009-12-11 17:16:32 -07:00
|
|
|
omap_mux_init_gpio(22, OMAP_PIN_INPUT_PULLUP);
|
2009-11-22 11:11:28 -07:00
|
|
|
gpio_request(OMAP3_EVM_EHCI_VBUS, "enable EHCI VBUS");
|
|
|
|
gpio_direction_output(OMAP3_EVM_EHCI_VBUS, 0);
|
|
|
|
gpio_set_value(OMAP3_EVM_EHCI_VBUS, 1);
|
|
|
|
|
|
|
|
/* Select EHCI port on main board */
|
2009-12-11 17:16:32 -07:00
|
|
|
omap_mux_init_gpio(61, OMAP_PIN_INPUT_PULLUP);
|
2009-11-22 11:11:28 -07:00
|
|
|
gpio_request(OMAP3_EVM_EHCI_SELECT, "select EHCI port");
|
|
|
|
gpio_direction_output(OMAP3_EVM_EHCI_SELECT, 0);
|
|
|
|
gpio_set_value(OMAP3_EVM_EHCI_SELECT, 0);
|
|
|
|
|
|
|
|
/* setup EHCI phy reset config */
|
2009-12-11 17:16:32 -07:00
|
|
|
omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP);
|
2009-11-22 11:11:28 -07:00
|
|
|
ehci_pdata.reset_gpio_port[1] = 21;
|
|
|
|
|
2010-03-25 05:25:27 -06:00
|
|
|
/* EVM REV >= E can supply 500mA with EXTVBUS programming */
|
|
|
|
musb_board_data.power = 500;
|
|
|
|
musb_board_data.extvbus = 1;
|
2009-11-22 11:11:28 -07:00
|
|
|
} else {
|
|
|
|
/* setup EHCI phy reset on MDC */
|
2009-12-11 17:16:32 -07:00
|
|
|
omap_mux_init_gpio(135, OMAP_PIN_OUTPUT);
|
2009-11-22 11:11:28 -07:00
|
|
|
ehci_pdata.reset_gpio_port[1] = 135;
|
|
|
|
}
|
2010-02-17 15:09:30 -07:00
|
|
|
usb_musb_init(&musb_board_data);
|
2009-11-22 11:11:01 -07:00
|
|
|
usb_ehci_init(&ehci_pdata);
|
2009-05-28 15:13:28 -06:00
|
|
|
ads7846_dev_init();
|
2009-11-22 11:11:30 -07:00
|
|
|
omap3evm_init_smsc911x();
|
2010-01-04 07:34:16 -07:00
|
|
|
omap3_evm_display_init();
|
2009-05-28 15:13:28 -06:00
|
|
|
}
|
|
|
|
|
|
|
|
MACHINE_START(OMAP3EVM, "OMAP3 EVM")
|
|
|
|
/* Maintainer: Syed Mohammed Khasim - Texas Instruments */
|
|
|
|
.boot_params = 0x80000100,
|
2010-08-04 05:43:18 -06:00
|
|
|
.map_io = omap3_map_io,
|
2010-05-23 03:18:16 -06:00
|
|
|
.reserve = omap_reserve,
|
2009-05-28 15:13:28 -06:00
|
|
|
.init_irq = omap3_evm_init_irq,
|
|
|
|
.init_machine = omap3_evm_init,
|
|
|
|
.timer = &omap_timer,
|
|
|
|
MACHINE_END
|