1
0
Fork 0
alistair23-linux/drivers/base/power/domain.c

1956 lines
50 KiB
C
Raw Normal View History

/*
* drivers/base/power/domain.c - Common code related to device power domains.
*
* Copyright (C) 2011 Rafael J. Wysocki <rjw@sisk.pl>, Renesas Electronics Corp.
*
* This file is released under the GPLv2.
*/
#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/pm_domain.h>
#include <linux/pm_qos.h>
#include <linux/pm_clock.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/sched.h>
#include <linux/suspend.h>
#include <linux/export.h>
#define GENPD_RETRY_MAX_MS 250 /* Approximate */
#define GENPD_DEV_CALLBACK(genpd, type, callback, dev) \
({ \
type (*__routine)(struct device *__d); \
type __ret = (type)0; \
\
__routine = genpd->dev_ops.callback; \
if (__routine) { \
__ret = __routine(dev); \
} \
__ret; \
})
static LIST_HEAD(gpd_list);
static DEFINE_MUTEX(gpd_list_lock);
/*
* Get the generic PM domain for a particular struct device.
* This validates the struct device pointer, the PM domain pointer,
* and checks that the PM domain pointer is a real generic PM domain.
* Any failure results in NULL being returned.
*/
struct generic_pm_domain *pm_genpd_lookup_dev(struct device *dev)
{
struct generic_pm_domain *genpd = NULL, *gpd;
if (IS_ERR_OR_NULL(dev) || IS_ERR_OR_NULL(dev->pm_domain))
return NULL;
mutex_lock(&gpd_list_lock);
list_for_each_entry(gpd, &gpd_list, gpd_list_node) {
if (&gpd->domain == dev->pm_domain) {
genpd = gpd;
break;
}
}
mutex_unlock(&gpd_list_lock);
return genpd;
}
/*
* This should only be used where we are certain that the pm_domain
* attached to the device is a genpd domain.
*/
static struct generic_pm_domain *dev_to_genpd(struct device *dev)
{
if (IS_ERR_OR_NULL(dev->pm_domain))
return ERR_PTR(-EINVAL);
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
return pd_to_genpd(dev->pm_domain);
}
static int genpd_stop_dev(struct generic_pm_domain *genpd, struct device *dev)
{
return GENPD_DEV_CALLBACK(genpd, int, stop, dev);
}
static int genpd_start_dev(struct generic_pm_domain *genpd, struct device *dev)
{
return GENPD_DEV_CALLBACK(genpd, int, start, dev);
}
static bool genpd_sd_counter_dec(struct generic_pm_domain *genpd)
{
bool ret = false;
if (!WARN_ON(atomic_read(&genpd->sd_count) == 0))
ret = !!atomic_dec_and_test(&genpd->sd_count);
return ret;
}
static void genpd_sd_counter_inc(struct generic_pm_domain *genpd)
{
atomic_inc(&genpd->sd_count);
smp_mb__after_atomic();
}
static int genpd_power_on(struct generic_pm_domain *genpd, bool timed)
{
ktime_t time_start;
s64 elapsed_ns;
int ret;
if (!genpd->power_on)
return 0;
if (!timed)
return genpd->power_on(genpd);
time_start = ktime_get();
ret = genpd->power_on(genpd);
if (ret)
return ret;
elapsed_ns = ktime_to_ns(ktime_sub(ktime_get(), time_start));
if (elapsed_ns <= genpd->power_on_latency_ns)
return ret;
genpd->power_on_latency_ns = elapsed_ns;
genpd->max_off_time_changed = true;
pr_debug("%s: Power-%s latency exceeded, new value %lld ns\n",
genpd->name, "on", elapsed_ns);
return ret;
}
static int genpd_power_off(struct generic_pm_domain *genpd, bool timed)
{
ktime_t time_start;
s64 elapsed_ns;
int ret;
if (!genpd->power_off)
return 0;
if (!timed)
return genpd->power_off(genpd);
time_start = ktime_get();
ret = genpd->power_off(genpd);
if (ret == -EBUSY)
return ret;
elapsed_ns = ktime_to_ns(ktime_sub(ktime_get(), time_start));
if (elapsed_ns <= genpd->power_off_latency_ns)
return ret;
genpd->power_off_latency_ns = elapsed_ns;
genpd->max_off_time_changed = true;
pr_debug("%s: Power-%s latency exceeded, new value %lld ns\n",
genpd->name, "off", elapsed_ns);
return ret;
}
/**
* genpd_queue_power_off_work - Queue up the execution of genpd_poweroff().
* @genpd: PM domait to power off.
*
* Queue up the execution of genpd_poweroff() unless it's already been done
* before.
*/
static void genpd_queue_power_off_work(struct generic_pm_domain *genpd)
{
queue_work(pm_wq, &genpd->power_off_work);
}
static int genpd_poweron(struct generic_pm_domain *genpd);
/**
* __genpd_poweron - Restore power to a given PM domain and its masters.
* @genpd: PM domain to power up.
*
PM / Domains: Allow generic PM domains to have multiple masters Currently, for a given generic PM domain there may be only one parent domain (i.e. a PM domain it depends on). However, there is at least one real-life case in which there should be two parents (masters) for one PM domain (the A3RV domain on SH7372 turns out to depend on the A4LC domain and it depends on the A4R domain and the same time). For this reason, allow a PM domain to have multiple parents (masters) by introducing objects representing links between PM domains. The (logical) links between PM domains represent relationships in which one domain is a master (i.e. it is depended on) and another domain is a slave (i.e. it depends on the master) with the rule that the slave cannot be powered on if the master is not powered on and the master cannot be powered off if the slave is not powered off. Each struct generic_pm_domain object representing a PM domain has two lists of links, a list of links in which it is a master and a list of links in which it is a slave. The first of these lists replaces the list of subdomains and the second one is used in place of the parent pointer. Each link is represented by struct gpd_link object containing pointers to the master and the slave and two struct list_head members allowing it to hook into two lists (the master's list of "master" links and the slave's list of "slave" links). This allows the code to get to the link from each side (either from the master or from the slave) and follow it in each direction. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-08-08 15:43:40 -06:00
* Restore power to @genpd and all of its masters so that it is possible to
* resume a device belonging to it.
*/
static int __genpd_poweron(struct generic_pm_domain *genpd)
{
PM / Domains: Allow generic PM domains to have multiple masters Currently, for a given generic PM domain there may be only one parent domain (i.e. a PM domain it depends on). However, there is at least one real-life case in which there should be two parents (masters) for one PM domain (the A3RV domain on SH7372 turns out to depend on the A4LC domain and it depends on the A4R domain and the same time). For this reason, allow a PM domain to have multiple parents (masters) by introducing objects representing links between PM domains. The (logical) links between PM domains represent relationships in which one domain is a master (i.e. it is depended on) and another domain is a slave (i.e. it depends on the master) with the rule that the slave cannot be powered on if the master is not powered on and the master cannot be powered off if the slave is not powered off. Each struct generic_pm_domain object representing a PM domain has two lists of links, a list of links in which it is a master and a list of links in which it is a slave. The first of these lists replaces the list of subdomains and the second one is used in place of the parent pointer. Each link is represented by struct gpd_link object containing pointers to the master and the slave and two struct list_head members allowing it to hook into two lists (the master's list of "master" links and the slave's list of "slave" links). This allows the code to get to the link from each side (either from the master or from the slave) and follow it in each direction. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-08-08 15:43:40 -06:00
struct gpd_link *link;
int ret = 0;
if (genpd->status == GPD_STATE_ACTIVE
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
|| (genpd->prepared_count > 0 && genpd->suspend_power_off))
return 0;
PM / Domains: Allow generic PM domains to have multiple masters Currently, for a given generic PM domain there may be only one parent domain (i.e. a PM domain it depends on). However, there is at least one real-life case in which there should be two parents (masters) for one PM domain (the A3RV domain on SH7372 turns out to depend on the A4LC domain and it depends on the A4R domain and the same time). For this reason, allow a PM domain to have multiple parents (masters) by introducing objects representing links between PM domains. The (logical) links between PM domains represent relationships in which one domain is a master (i.e. it is depended on) and another domain is a slave (i.e. it depends on the master) with the rule that the slave cannot be powered on if the master is not powered on and the master cannot be powered off if the slave is not powered off. Each struct generic_pm_domain object representing a PM domain has two lists of links, a list of links in which it is a master and a list of links in which it is a slave. The first of these lists replaces the list of subdomains and the second one is used in place of the parent pointer. Each link is represented by struct gpd_link object containing pointers to the master and the slave and two struct list_head members allowing it to hook into two lists (the master's list of "master" links and the slave's list of "slave" links). This allows the code to get to the link from each side (either from the master or from the slave) and follow it in each direction. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-08-08 15:43:40 -06:00
/*
* The list is guaranteed not to change while the loop below is being
* executed, unless one of the masters' .power_on() callbacks fiddles
* with it.
*/
list_for_each_entry(link, &genpd->slave_links, slave_node) {
genpd_sd_counter_inc(link->master);
ret = genpd_poweron(link->master);
PM / Domains: Allow generic PM domains to have multiple masters Currently, for a given generic PM domain there may be only one parent domain (i.e. a PM domain it depends on). However, there is at least one real-life case in which there should be two parents (masters) for one PM domain (the A3RV domain on SH7372 turns out to depend on the A4LC domain and it depends on the A4R domain and the same time). For this reason, allow a PM domain to have multiple parents (masters) by introducing objects representing links between PM domains. The (logical) links between PM domains represent relationships in which one domain is a master (i.e. it is depended on) and another domain is a slave (i.e. it depends on the master) with the rule that the slave cannot be powered on if the master is not powered on and the master cannot be powered off if the slave is not powered off. Each struct generic_pm_domain object representing a PM domain has two lists of links, a list of links in which it is a master and a list of links in which it is a slave. The first of these lists replaces the list of subdomains and the second one is used in place of the parent pointer. Each link is represented by struct gpd_link object containing pointers to the master and the slave and two struct list_head members allowing it to hook into two lists (the master's list of "master" links and the slave's list of "slave" links). This allows the code to get to the link from each side (either from the master or from the slave) and follow it in each direction. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-08-08 15:43:40 -06:00
if (ret) {
genpd_sd_counter_dec(link->master);
goto err;
PM / Domains: Allow generic PM domains to have multiple masters Currently, for a given generic PM domain there may be only one parent domain (i.e. a PM domain it depends on). However, there is at least one real-life case in which there should be two parents (masters) for one PM domain (the A3RV domain on SH7372 turns out to depend on the A4LC domain and it depends on the A4R domain and the same time). For this reason, allow a PM domain to have multiple parents (masters) by introducing objects representing links between PM domains. The (logical) links between PM domains represent relationships in which one domain is a master (i.e. it is depended on) and another domain is a slave (i.e. it depends on the master) with the rule that the slave cannot be powered on if the master is not powered on and the master cannot be powered off if the slave is not powered off. Each struct generic_pm_domain object representing a PM domain has two lists of links, a list of links in which it is a master and a list of links in which it is a slave. The first of these lists replaces the list of subdomains and the second one is used in place of the parent pointer. Each link is represented by struct gpd_link object containing pointers to the master and the slave and two struct list_head members allowing it to hook into two lists (the master's list of "master" links and the slave's list of "slave" links). This allows the code to get to the link from each side (either from the master or from the slave) and follow it in each direction. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-08-08 15:43:40 -06:00
}
}
ret = genpd_power_on(genpd, true);
if (ret)
goto err;
PM / Domains: Remove intermediate states from the power off sequence Genpd's ->runtime_suspend() (assigned to pm_genpd_runtime_suspend()) doesn't immediately walk the hierarchy of ->runtime_suspend() callbacks. Instead, pm_genpd_runtime_suspend() calls pm_genpd_poweroff() which postpones that until *all* the devices in the genpd are runtime suspended. When pm_genpd_poweroff() discovers that the last device in the genpd is about to be runtime suspended, it calls __pm_genpd_save_device() for *all* the devices in the genpd sequentially. Furthermore, __pm_genpd_save_device() invokes the ->start() callback, walks the hierarchy of the ->runtime_suspend() callbacks and invokes the ->stop() callback. This causes a "thundering herd" problem. Let's address this issue by having pm_genpd_runtime_suspend() immediately walk the hierarchy of the ->runtime_suspend() callbacks, instead of postponing that to the power off sequence via pm_genpd_poweroff(). If the selected ->runtime_suspend() callback doesn't return an error code, call pm_genpd_poweroff() to see if it's feasible to also power off the PM domain. Adopting this change enables us to simplify parts of the code in genpd, for example the locking mechanism. Additionally, it gives some positive side effects, as described below. i) One device's ->runtime_resume() latency is no longer affected by other devices' latencies in a genpd. The complexity genpd has to support the option to abort the power off sequence suffers from latency issues. More precisely, a device that is requested to be runtime resumed, may end up waiting for __pm_genpd_save_device() to complete its operations for *another* device. That's because pm_genpd_poweroff() can't confirm an abort request while it waits for __pm_genpd_save_device() to return. As this patch removes the intermediate states in pm_genpd_poweroff() while powering off the PM domain, we no longer need the ability to abort that sequence. ii) Make pm_runtime[_status]_suspended() reliable when used with genpd. Until the last device in a genpd becomes idle, pm_genpd_runtime_suspend() will return 0 without actually walking the hierarchy of the ->runtime_suspend() callbacks. However, by returning 0 the runtime PM core considers the device as runtime_suspended, so pm_runtime[_status]_suspended() will return true, even though the device isn't (yet) runtime suspended. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, pm_runtime[_status]_suspended() will accurately reflect the status of the device. iii) Enable fine-grained PM through runtime PM callbacks in drivers/subsystems. There are currently cases were drivers/subsystems implements runtime PM callbacks to deploy fine-grained PM (e.g. gate clocks, move pinctrl to power-save state, etc.). While using the genpd, pm_genpd_runtime_suspend() postpones invoking these callbacks until *all* the devices in the genpd are runtime suspended. In essence, one runtime resumed device prevents fine-grained PM for other devices within the same genpd. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, fine-grained PM is enabled throughout all the levels of runtime PM callbacks. iiii) Enable fine-grained PM for IRQ safe devices Per the definition for an IRQ safe device, its runtime PM callbacks must be able to execute in atomic context. In the path while genpd walks the hierarchy of the ->runtime_suspend() callbacks for the device, it uses a mutex. Therefore, genpd prevents that path to be executed for IRQ safe devices. As this patch changes pm_genpd_runtime_suspend() to immediately walk the hierarchy of the ->runtime_suspend() callbacks and without needing to use a mutex, fine-grained PM is enabled throughout all the levels of runtime PM callbacks for IRQ safe devices. Unfortunately this patch also comes with a drawback, as described in the summary below. Driver's/subsystem's runtime PM callbacks may be invoked even when the genpd hasn't actually powered off the PM domain, potentially introducing unnecessary latency. However, in most cases, saving/restoring register contexts for devices are typically fast operations or can be optimized in device specific ways (e.g. shadow copies of register contents in memory, device-specific checks to see if context has been lost before restoring context, etc.). Still, in some cases the driver/subsystem may suffer from latency if runtime PM is used in a very fine-grained manner (e.g. for each IO request or xfer). To prevent that extra overhead, the driver/subsystem may deploy the runtime PM autosuspend feature. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-18 07:17:53 -06:00
genpd->status = GPD_STATE_ACTIVE;
return 0;
err:
list_for_each_entry_continue_reverse(link,
&genpd->slave_links,
slave_node) {
PM / Domains: Allow generic PM domains to have multiple masters Currently, for a given generic PM domain there may be only one parent domain (i.e. a PM domain it depends on). However, there is at least one real-life case in which there should be two parents (masters) for one PM domain (the A3RV domain on SH7372 turns out to depend on the A4LC domain and it depends on the A4R domain and the same time). For this reason, allow a PM domain to have multiple parents (masters) by introducing objects representing links between PM domains. The (logical) links between PM domains represent relationships in which one domain is a master (i.e. it is depended on) and another domain is a slave (i.e. it depends on the master) with the rule that the slave cannot be powered on if the master is not powered on and the master cannot be powered off if the slave is not powered off. Each struct generic_pm_domain object representing a PM domain has two lists of links, a list of links in which it is a master and a list of links in which it is a slave. The first of these lists replaces the list of subdomains and the second one is used in place of the parent pointer. Each link is represented by struct gpd_link object containing pointers to the master and the slave and two struct list_head members allowing it to hook into two lists (the master's list of "master" links and the slave's list of "slave" links). This allows the code to get to the link from each side (either from the master or from the slave) and follow it in each direction. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-08-08 15:43:40 -06:00
genpd_sd_counter_dec(link->master);
genpd_queue_power_off_work(link->master);
}
return ret;
}
/**
* genpd_poweron - Restore power to a given PM domain and its masters.
* @genpd: PM domain to power up.
*/
static int genpd_poweron(struct generic_pm_domain *genpd)
{
int ret;
mutex_lock(&genpd->lock);
ret = __genpd_poweron(genpd);
mutex_unlock(&genpd->lock);
return ret;
}
static int genpd_save_dev(struct generic_pm_domain *genpd, struct device *dev)
{
return GENPD_DEV_CALLBACK(genpd, int, save_state, dev);
}
PM / Domains: Remove intermediate states from the power off sequence Genpd's ->runtime_suspend() (assigned to pm_genpd_runtime_suspend()) doesn't immediately walk the hierarchy of ->runtime_suspend() callbacks. Instead, pm_genpd_runtime_suspend() calls pm_genpd_poweroff() which postpones that until *all* the devices in the genpd are runtime suspended. When pm_genpd_poweroff() discovers that the last device in the genpd is about to be runtime suspended, it calls __pm_genpd_save_device() for *all* the devices in the genpd sequentially. Furthermore, __pm_genpd_save_device() invokes the ->start() callback, walks the hierarchy of the ->runtime_suspend() callbacks and invokes the ->stop() callback. This causes a "thundering herd" problem. Let's address this issue by having pm_genpd_runtime_suspend() immediately walk the hierarchy of the ->runtime_suspend() callbacks, instead of postponing that to the power off sequence via pm_genpd_poweroff(). If the selected ->runtime_suspend() callback doesn't return an error code, call pm_genpd_poweroff() to see if it's feasible to also power off the PM domain. Adopting this change enables us to simplify parts of the code in genpd, for example the locking mechanism. Additionally, it gives some positive side effects, as described below. i) One device's ->runtime_resume() latency is no longer affected by other devices' latencies in a genpd. The complexity genpd has to support the option to abort the power off sequence suffers from latency issues. More precisely, a device that is requested to be runtime resumed, may end up waiting for __pm_genpd_save_device() to complete its operations for *another* device. That's because pm_genpd_poweroff() can't confirm an abort request while it waits for __pm_genpd_save_device() to return. As this patch removes the intermediate states in pm_genpd_poweroff() while powering off the PM domain, we no longer need the ability to abort that sequence. ii) Make pm_runtime[_status]_suspended() reliable when used with genpd. Until the last device in a genpd becomes idle, pm_genpd_runtime_suspend() will return 0 without actually walking the hierarchy of the ->runtime_suspend() callbacks. However, by returning 0 the runtime PM core considers the device as runtime_suspended, so pm_runtime[_status]_suspended() will return true, even though the device isn't (yet) runtime suspended. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, pm_runtime[_status]_suspended() will accurately reflect the status of the device. iii) Enable fine-grained PM through runtime PM callbacks in drivers/subsystems. There are currently cases were drivers/subsystems implements runtime PM callbacks to deploy fine-grained PM (e.g. gate clocks, move pinctrl to power-save state, etc.). While using the genpd, pm_genpd_runtime_suspend() postpones invoking these callbacks until *all* the devices in the genpd are runtime suspended. In essence, one runtime resumed device prevents fine-grained PM for other devices within the same genpd. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, fine-grained PM is enabled throughout all the levels of runtime PM callbacks. iiii) Enable fine-grained PM for IRQ safe devices Per the definition for an IRQ safe device, its runtime PM callbacks must be able to execute in atomic context. In the path while genpd walks the hierarchy of the ->runtime_suspend() callbacks for the device, it uses a mutex. Therefore, genpd prevents that path to be executed for IRQ safe devices. As this patch changes pm_genpd_runtime_suspend() to immediately walk the hierarchy of the ->runtime_suspend() callbacks and without needing to use a mutex, fine-grained PM is enabled throughout all the levels of runtime PM callbacks for IRQ safe devices. Unfortunately this patch also comes with a drawback, as described in the summary below. Driver's/subsystem's runtime PM callbacks may be invoked even when the genpd hasn't actually powered off the PM domain, potentially introducing unnecessary latency. However, in most cases, saving/restoring register contexts for devices are typically fast operations or can be optimized in device specific ways (e.g. shadow copies of register contents in memory, device-specific checks to see if context has been lost before restoring context, etc.). Still, in some cases the driver/subsystem may suffer from latency if runtime PM is used in a very fine-grained manner (e.g. for each IO request or xfer). To prevent that extra overhead, the driver/subsystem may deploy the runtime PM autosuspend feature. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-18 07:17:53 -06:00
static int genpd_restore_dev(struct generic_pm_domain *genpd,
struct device *dev)
{
return GENPD_DEV_CALLBACK(genpd, int, restore_state, dev);
}
static int genpd_dev_pm_qos_notifier(struct notifier_block *nb,
unsigned long val, void *ptr)
{
struct generic_pm_domain_data *gpd_data;
struct device *dev;
gpd_data = container_of(nb, struct generic_pm_domain_data, nb);
dev = gpd_data->base.dev;
for (;;) {
struct generic_pm_domain *genpd;
struct pm_domain_data *pdd;
spin_lock_irq(&dev->power.lock);
pdd = dev->power.subsys_data ?
dev->power.subsys_data->domain_data : NULL;
if (pdd && pdd->dev) {
to_gpd_data(pdd)->td.constraint_changed = true;
genpd = dev_to_genpd(dev);
} else {
genpd = ERR_PTR(-ENODATA);
}
spin_unlock_irq(&dev->power.lock);
if (!IS_ERR(genpd)) {
mutex_lock(&genpd->lock);
genpd->max_off_time_changed = true;
mutex_unlock(&genpd->lock);
}
dev = dev->parent;
if (!dev || dev->power.ignore_children)
break;
}
return NOTIFY_DONE;
}
/**
* genpd_poweroff - Remove power from a given PM domain.
* @genpd: PM domain to power down.
* @is_async: PM domain is powered down from a scheduled work
*
* If all of the @genpd's devices have been suspended and all of its subdomains
PM / Domains: Remove intermediate states from the power off sequence Genpd's ->runtime_suspend() (assigned to pm_genpd_runtime_suspend()) doesn't immediately walk the hierarchy of ->runtime_suspend() callbacks. Instead, pm_genpd_runtime_suspend() calls pm_genpd_poweroff() which postpones that until *all* the devices in the genpd are runtime suspended. When pm_genpd_poweroff() discovers that the last device in the genpd is about to be runtime suspended, it calls __pm_genpd_save_device() for *all* the devices in the genpd sequentially. Furthermore, __pm_genpd_save_device() invokes the ->start() callback, walks the hierarchy of the ->runtime_suspend() callbacks and invokes the ->stop() callback. This causes a "thundering herd" problem. Let's address this issue by having pm_genpd_runtime_suspend() immediately walk the hierarchy of the ->runtime_suspend() callbacks, instead of postponing that to the power off sequence via pm_genpd_poweroff(). If the selected ->runtime_suspend() callback doesn't return an error code, call pm_genpd_poweroff() to see if it's feasible to also power off the PM domain. Adopting this change enables us to simplify parts of the code in genpd, for example the locking mechanism. Additionally, it gives some positive side effects, as described below. i) One device's ->runtime_resume() latency is no longer affected by other devices' latencies in a genpd. The complexity genpd has to support the option to abort the power off sequence suffers from latency issues. More precisely, a device that is requested to be runtime resumed, may end up waiting for __pm_genpd_save_device() to complete its operations for *another* device. That's because pm_genpd_poweroff() can't confirm an abort request while it waits for __pm_genpd_save_device() to return. As this patch removes the intermediate states in pm_genpd_poweroff() while powering off the PM domain, we no longer need the ability to abort that sequence. ii) Make pm_runtime[_status]_suspended() reliable when used with genpd. Until the last device in a genpd becomes idle, pm_genpd_runtime_suspend() will return 0 without actually walking the hierarchy of the ->runtime_suspend() callbacks. However, by returning 0 the runtime PM core considers the device as runtime_suspended, so pm_runtime[_status]_suspended() will return true, even though the device isn't (yet) runtime suspended. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, pm_runtime[_status]_suspended() will accurately reflect the status of the device. iii) Enable fine-grained PM through runtime PM callbacks in drivers/subsystems. There are currently cases were drivers/subsystems implements runtime PM callbacks to deploy fine-grained PM (e.g. gate clocks, move pinctrl to power-save state, etc.). While using the genpd, pm_genpd_runtime_suspend() postpones invoking these callbacks until *all* the devices in the genpd are runtime suspended. In essence, one runtime resumed device prevents fine-grained PM for other devices within the same genpd. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, fine-grained PM is enabled throughout all the levels of runtime PM callbacks. iiii) Enable fine-grained PM for IRQ safe devices Per the definition for an IRQ safe device, its runtime PM callbacks must be able to execute in atomic context. In the path while genpd walks the hierarchy of the ->runtime_suspend() callbacks for the device, it uses a mutex. Therefore, genpd prevents that path to be executed for IRQ safe devices. As this patch changes pm_genpd_runtime_suspend() to immediately walk the hierarchy of the ->runtime_suspend() callbacks and without needing to use a mutex, fine-grained PM is enabled throughout all the levels of runtime PM callbacks for IRQ safe devices. Unfortunately this patch also comes with a drawback, as described in the summary below. Driver's/subsystem's runtime PM callbacks may be invoked even when the genpd hasn't actually powered off the PM domain, potentially introducing unnecessary latency. However, in most cases, saving/restoring register contexts for devices are typically fast operations or can be optimized in device specific ways (e.g. shadow copies of register contents in memory, device-specific checks to see if context has been lost before restoring context, etc.). Still, in some cases the driver/subsystem may suffer from latency if runtime PM is used in a very fine-grained manner (e.g. for each IO request or xfer). To prevent that extra overhead, the driver/subsystem may deploy the runtime PM autosuspend feature. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-18 07:17:53 -06:00
* have been powered down, remove power from @genpd.
*/
static int genpd_poweroff(struct generic_pm_domain *genpd, bool is_async)
{
struct pm_domain_data *pdd;
PM / Domains: Allow generic PM domains to have multiple masters Currently, for a given generic PM domain there may be only one parent domain (i.e. a PM domain it depends on). However, there is at least one real-life case in which there should be two parents (masters) for one PM domain (the A3RV domain on SH7372 turns out to depend on the A4LC domain and it depends on the A4R domain and the same time). For this reason, allow a PM domain to have multiple parents (masters) by introducing objects representing links between PM domains. The (logical) links between PM domains represent relationships in which one domain is a master (i.e. it is depended on) and another domain is a slave (i.e. it depends on the master) with the rule that the slave cannot be powered on if the master is not powered on and the master cannot be powered off if the slave is not powered off. Each struct generic_pm_domain object representing a PM domain has two lists of links, a list of links in which it is a master and a list of links in which it is a slave. The first of these lists replaces the list of subdomains and the second one is used in place of the parent pointer. Each link is represented by struct gpd_link object containing pointers to the master and the slave and two struct list_head members allowing it to hook into two lists (the master's list of "master" links and the slave's list of "slave" links). This allows the code to get to the link from each side (either from the master or from the slave) and follow it in each direction. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-08-08 15:43:40 -06:00
struct gpd_link *link;
PM / Domains: Remove intermediate states from the power off sequence Genpd's ->runtime_suspend() (assigned to pm_genpd_runtime_suspend()) doesn't immediately walk the hierarchy of ->runtime_suspend() callbacks. Instead, pm_genpd_runtime_suspend() calls pm_genpd_poweroff() which postpones that until *all* the devices in the genpd are runtime suspended. When pm_genpd_poweroff() discovers that the last device in the genpd is about to be runtime suspended, it calls __pm_genpd_save_device() for *all* the devices in the genpd sequentially. Furthermore, __pm_genpd_save_device() invokes the ->start() callback, walks the hierarchy of the ->runtime_suspend() callbacks and invokes the ->stop() callback. This causes a "thundering herd" problem. Let's address this issue by having pm_genpd_runtime_suspend() immediately walk the hierarchy of the ->runtime_suspend() callbacks, instead of postponing that to the power off sequence via pm_genpd_poweroff(). If the selected ->runtime_suspend() callback doesn't return an error code, call pm_genpd_poweroff() to see if it's feasible to also power off the PM domain. Adopting this change enables us to simplify parts of the code in genpd, for example the locking mechanism. Additionally, it gives some positive side effects, as described below. i) One device's ->runtime_resume() latency is no longer affected by other devices' latencies in a genpd. The complexity genpd has to support the option to abort the power off sequence suffers from latency issues. More precisely, a device that is requested to be runtime resumed, may end up waiting for __pm_genpd_save_device() to complete its operations for *another* device. That's because pm_genpd_poweroff() can't confirm an abort request while it waits for __pm_genpd_save_device() to return. As this patch removes the intermediate states in pm_genpd_poweroff() while powering off the PM domain, we no longer need the ability to abort that sequence. ii) Make pm_runtime[_status]_suspended() reliable when used with genpd. Until the last device in a genpd becomes idle, pm_genpd_runtime_suspend() will return 0 without actually walking the hierarchy of the ->runtime_suspend() callbacks. However, by returning 0 the runtime PM core considers the device as runtime_suspended, so pm_runtime[_status]_suspended() will return true, even though the device isn't (yet) runtime suspended. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, pm_runtime[_status]_suspended() will accurately reflect the status of the device. iii) Enable fine-grained PM through runtime PM callbacks in drivers/subsystems. There are currently cases were drivers/subsystems implements runtime PM callbacks to deploy fine-grained PM (e.g. gate clocks, move pinctrl to power-save state, etc.). While using the genpd, pm_genpd_runtime_suspend() postpones invoking these callbacks until *all* the devices in the genpd are runtime suspended. In essence, one runtime resumed device prevents fine-grained PM for other devices within the same genpd. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, fine-grained PM is enabled throughout all the levels of runtime PM callbacks. iiii) Enable fine-grained PM for IRQ safe devices Per the definition for an IRQ safe device, its runtime PM callbacks must be able to execute in atomic context. In the path while genpd walks the hierarchy of the ->runtime_suspend() callbacks for the device, it uses a mutex. Therefore, genpd prevents that path to be executed for IRQ safe devices. As this patch changes pm_genpd_runtime_suspend() to immediately walk the hierarchy of the ->runtime_suspend() callbacks and without needing to use a mutex, fine-grained PM is enabled throughout all the levels of runtime PM callbacks for IRQ safe devices. Unfortunately this patch also comes with a drawback, as described in the summary below. Driver's/subsystem's runtime PM callbacks may be invoked even when the genpd hasn't actually powered off the PM domain, potentially introducing unnecessary latency. However, in most cases, saving/restoring register contexts for devices are typically fast operations or can be optimized in device specific ways (e.g. shadow copies of register contents in memory, device-specific checks to see if context has been lost before restoring context, etc.). Still, in some cases the driver/subsystem may suffer from latency if runtime PM is used in a very fine-grained manner (e.g. for each IO request or xfer). To prevent that extra overhead, the driver/subsystem may deploy the runtime PM autosuspend feature. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-18 07:17:53 -06:00
unsigned int not_suspended = 0;
PM / Domains: Allow callbacks to execute all runtime PM helpers A deadlock may occur if one of the PM domains' .start_device() or .stop_device() callbacks or a device driver's .runtime_suspend() or .runtime_resume() callback executed by the core generic PM domain code uses a "wrong" runtime PM helper function. This happens, for example, if .runtime_resume() from one device's driver calls pm_runtime_resume() for another device in the same PM domain. A similar situation may take place if a device's parent is in the same PM domain, in which case the runtime PM framework may execute pm_genpd_runtime_resume() automatically for the parent (if it is suspended at the moment). This, of course, is undesirable, so the generic PM domains code should be modified to prevent it from happening. The runtime PM framework guarantees that pm_genpd_runtime_suspend() and pm_genpd_runtime_resume() won't be executed in parallel for the same device, so the generic PM domains code need not worry about those cases. Still, it needs to prevent the other possible race conditions between pm_genpd_runtime_suspend(), pm_genpd_runtime_resume(), pm_genpd_poweron() and pm_genpd_poweroff() from happening and it needs to avoid deadlocks at the same time. To this end, modify the generic PM domains code to relax synchronization rules so that: * pm_genpd_poweron() doesn't wait for the PM domain status to change from GPD_STATE_BUSY. If it finds that the status is not GPD_STATE_POWER_OFF, it returns without powering the domain on (it may modify the status depending on the circumstances). * pm_genpd_poweroff() returns as soon as it finds that the PM domain's status changed from GPD_STATE_BUSY after it's released the PM domain's lock. * pm_genpd_runtime_suspend() doesn't wait for the PM domain status to change from GPD_STATE_BUSY after executing the domain's .stop_device() callback and executes pm_genpd_poweroff() only if pm_genpd_runtime_resume() is not executed in parallel. * pm_genpd_runtime_resume() doesn't wait for the PM domain status to change from GPD_STATE_BUSY after executing pm_genpd_poweron() and sets the domain's status to GPD_STATE_BUSY and increments its counter of resuming devices (introduced by this change) immediately after acquiring the lock. The counter of resuming devices is then decremented after executing __pm_genpd_runtime_resume() for the device and the domain's status is reset to GPD_STATE_ACTIVE (unless there are more resuming devices in the domain, in which case the status remains GPD_STATE_BUSY). This way, for example, if a device driver's .runtime_resume() callback executes pm_runtime_resume() for another device in the same PM domain, pm_genpd_poweron() called by pm_genpd_runtime_resume() invoked by the runtime PM framework will not block and it will see that there's nothing to do for it. Next, the PM domain's lock will be acquired without waiting for its status to change from GPD_STATE_BUSY and the device driver's .runtime_resume() callback will be executed. In turn, if pm_runtime_suspend() is executed by one device driver's .runtime_resume() callback for another device in the same PM domain, pm_genpd_poweroff() executed by pm_genpd_runtime_suspend() invoked by the runtime PM framework as a result will notice that one of the devices in the domain is being resumed, so it will return immediately. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-11 16:39:36 -06:00
/*
* Do not try to power off the domain in the following situations:
* (1) The domain is already in the "power off" state.
PM / Domains: Remove intermediate states from the power off sequence Genpd's ->runtime_suspend() (assigned to pm_genpd_runtime_suspend()) doesn't immediately walk the hierarchy of ->runtime_suspend() callbacks. Instead, pm_genpd_runtime_suspend() calls pm_genpd_poweroff() which postpones that until *all* the devices in the genpd are runtime suspended. When pm_genpd_poweroff() discovers that the last device in the genpd is about to be runtime suspended, it calls __pm_genpd_save_device() for *all* the devices in the genpd sequentially. Furthermore, __pm_genpd_save_device() invokes the ->start() callback, walks the hierarchy of the ->runtime_suspend() callbacks and invokes the ->stop() callback. This causes a "thundering herd" problem. Let's address this issue by having pm_genpd_runtime_suspend() immediately walk the hierarchy of the ->runtime_suspend() callbacks, instead of postponing that to the power off sequence via pm_genpd_poweroff(). If the selected ->runtime_suspend() callback doesn't return an error code, call pm_genpd_poweroff() to see if it's feasible to also power off the PM domain. Adopting this change enables us to simplify parts of the code in genpd, for example the locking mechanism. Additionally, it gives some positive side effects, as described below. i) One device's ->runtime_resume() latency is no longer affected by other devices' latencies in a genpd. The complexity genpd has to support the option to abort the power off sequence suffers from latency issues. More precisely, a device that is requested to be runtime resumed, may end up waiting for __pm_genpd_save_device() to complete its operations for *another* device. That's because pm_genpd_poweroff() can't confirm an abort request while it waits for __pm_genpd_save_device() to return. As this patch removes the intermediate states in pm_genpd_poweroff() while powering off the PM domain, we no longer need the ability to abort that sequence. ii) Make pm_runtime[_status]_suspended() reliable when used with genpd. Until the last device in a genpd becomes idle, pm_genpd_runtime_suspend() will return 0 without actually walking the hierarchy of the ->runtime_suspend() callbacks. However, by returning 0 the runtime PM core considers the device as runtime_suspended, so pm_runtime[_status]_suspended() will return true, even though the device isn't (yet) runtime suspended. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, pm_runtime[_status]_suspended() will accurately reflect the status of the device. iii) Enable fine-grained PM through runtime PM callbacks in drivers/subsystems. There are currently cases were drivers/subsystems implements runtime PM callbacks to deploy fine-grained PM (e.g. gate clocks, move pinctrl to power-save state, etc.). While using the genpd, pm_genpd_runtime_suspend() postpones invoking these callbacks until *all* the devices in the genpd are runtime suspended. In essence, one runtime resumed device prevents fine-grained PM for other devices within the same genpd. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, fine-grained PM is enabled throughout all the levels of runtime PM callbacks. iiii) Enable fine-grained PM for IRQ safe devices Per the definition for an IRQ safe device, its runtime PM callbacks must be able to execute in atomic context. In the path while genpd walks the hierarchy of the ->runtime_suspend() callbacks for the device, it uses a mutex. Therefore, genpd prevents that path to be executed for IRQ safe devices. As this patch changes pm_genpd_runtime_suspend() to immediately walk the hierarchy of the ->runtime_suspend() callbacks and without needing to use a mutex, fine-grained PM is enabled throughout all the levels of runtime PM callbacks for IRQ safe devices. Unfortunately this patch also comes with a drawback, as described in the summary below. Driver's/subsystem's runtime PM callbacks may be invoked even when the genpd hasn't actually powered off the PM domain, potentially introducing unnecessary latency. However, in most cases, saving/restoring register contexts for devices are typically fast operations or can be optimized in device specific ways (e.g. shadow copies of register contents in memory, device-specific checks to see if context has been lost before restoring context, etc.). Still, in some cases the driver/subsystem may suffer from latency if runtime PM is used in a very fine-grained manner (e.g. for each IO request or xfer). To prevent that extra overhead, the driver/subsystem may deploy the runtime PM autosuspend feature. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-18 07:17:53 -06:00
* (2) System suspend is in progress.
PM / Domains: Allow callbacks to execute all runtime PM helpers A deadlock may occur if one of the PM domains' .start_device() or .stop_device() callbacks or a device driver's .runtime_suspend() or .runtime_resume() callback executed by the core generic PM domain code uses a "wrong" runtime PM helper function. This happens, for example, if .runtime_resume() from one device's driver calls pm_runtime_resume() for another device in the same PM domain. A similar situation may take place if a device's parent is in the same PM domain, in which case the runtime PM framework may execute pm_genpd_runtime_resume() automatically for the parent (if it is suspended at the moment). This, of course, is undesirable, so the generic PM domains code should be modified to prevent it from happening. The runtime PM framework guarantees that pm_genpd_runtime_suspend() and pm_genpd_runtime_resume() won't be executed in parallel for the same device, so the generic PM domains code need not worry about those cases. Still, it needs to prevent the other possible race conditions between pm_genpd_runtime_suspend(), pm_genpd_runtime_resume(), pm_genpd_poweron() and pm_genpd_poweroff() from happening and it needs to avoid deadlocks at the same time. To this end, modify the generic PM domains code to relax synchronization rules so that: * pm_genpd_poweron() doesn't wait for the PM domain status to change from GPD_STATE_BUSY. If it finds that the status is not GPD_STATE_POWER_OFF, it returns without powering the domain on (it may modify the status depending on the circumstances). * pm_genpd_poweroff() returns as soon as it finds that the PM domain's status changed from GPD_STATE_BUSY after it's released the PM domain's lock. * pm_genpd_runtime_suspend() doesn't wait for the PM domain status to change from GPD_STATE_BUSY after executing the domain's .stop_device() callback and executes pm_genpd_poweroff() only if pm_genpd_runtime_resume() is not executed in parallel. * pm_genpd_runtime_resume() doesn't wait for the PM domain status to change from GPD_STATE_BUSY after executing pm_genpd_poweron() and sets the domain's status to GPD_STATE_BUSY and increments its counter of resuming devices (introduced by this change) immediately after acquiring the lock. The counter of resuming devices is then decremented after executing __pm_genpd_runtime_resume() for the device and the domain's status is reset to GPD_STATE_ACTIVE (unless there are more resuming devices in the domain, in which case the status remains GPD_STATE_BUSY). This way, for example, if a device driver's .runtime_resume() callback executes pm_runtime_resume() for another device in the same PM domain, pm_genpd_poweron() called by pm_genpd_runtime_resume() invoked by the runtime PM framework will not block and it will see that there's nothing to do for it. Next, the PM domain's lock will be acquired without waiting for its status to change from GPD_STATE_BUSY and the device driver's .runtime_resume() callback will be executed. In turn, if pm_runtime_suspend() is executed by one device driver's .runtime_resume() callback for another device in the same PM domain, pm_genpd_poweroff() executed by pm_genpd_runtime_suspend() invoked by the runtime PM framework as a result will notice that one of the devices in the domain is being resumed, so it will return immediately. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-11 16:39:36 -06:00
*/
if (genpd->status == GPD_STATE_POWER_OFF
PM / Domains: Remove intermediate states from the power off sequence Genpd's ->runtime_suspend() (assigned to pm_genpd_runtime_suspend()) doesn't immediately walk the hierarchy of ->runtime_suspend() callbacks. Instead, pm_genpd_runtime_suspend() calls pm_genpd_poweroff() which postpones that until *all* the devices in the genpd are runtime suspended. When pm_genpd_poweroff() discovers that the last device in the genpd is about to be runtime suspended, it calls __pm_genpd_save_device() for *all* the devices in the genpd sequentially. Furthermore, __pm_genpd_save_device() invokes the ->start() callback, walks the hierarchy of the ->runtime_suspend() callbacks and invokes the ->stop() callback. This causes a "thundering herd" problem. Let's address this issue by having pm_genpd_runtime_suspend() immediately walk the hierarchy of the ->runtime_suspend() callbacks, instead of postponing that to the power off sequence via pm_genpd_poweroff(). If the selected ->runtime_suspend() callback doesn't return an error code, call pm_genpd_poweroff() to see if it's feasible to also power off the PM domain. Adopting this change enables us to simplify parts of the code in genpd, for example the locking mechanism. Additionally, it gives some positive side effects, as described below. i) One device's ->runtime_resume() latency is no longer affected by other devices' latencies in a genpd. The complexity genpd has to support the option to abort the power off sequence suffers from latency issues. More precisely, a device that is requested to be runtime resumed, may end up waiting for __pm_genpd_save_device() to complete its operations for *another* device. That's because pm_genpd_poweroff() can't confirm an abort request while it waits for __pm_genpd_save_device() to return. As this patch removes the intermediate states in pm_genpd_poweroff() while powering off the PM domain, we no longer need the ability to abort that sequence. ii) Make pm_runtime[_status]_suspended() reliable when used with genpd. Until the last device in a genpd becomes idle, pm_genpd_runtime_suspend() will return 0 without actually walking the hierarchy of the ->runtime_suspend() callbacks. However, by returning 0 the runtime PM core considers the device as runtime_suspended, so pm_runtime[_status]_suspended() will return true, even though the device isn't (yet) runtime suspended. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, pm_runtime[_status]_suspended() will accurately reflect the status of the device. iii) Enable fine-grained PM through runtime PM callbacks in drivers/subsystems. There are currently cases were drivers/subsystems implements runtime PM callbacks to deploy fine-grained PM (e.g. gate clocks, move pinctrl to power-save state, etc.). While using the genpd, pm_genpd_runtime_suspend() postpones invoking these callbacks until *all* the devices in the genpd are runtime suspended. In essence, one runtime resumed device prevents fine-grained PM for other devices within the same genpd. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, fine-grained PM is enabled throughout all the levels of runtime PM callbacks. iiii) Enable fine-grained PM for IRQ safe devices Per the definition for an IRQ safe device, its runtime PM callbacks must be able to execute in atomic context. In the path while genpd walks the hierarchy of the ->runtime_suspend() callbacks for the device, it uses a mutex. Therefore, genpd prevents that path to be executed for IRQ safe devices. As this patch changes pm_genpd_runtime_suspend() to immediately walk the hierarchy of the ->runtime_suspend() callbacks and without needing to use a mutex, fine-grained PM is enabled throughout all the levels of runtime PM callbacks for IRQ safe devices. Unfortunately this patch also comes with a drawback, as described in the summary below. Driver's/subsystem's runtime PM callbacks may be invoked even when the genpd hasn't actually powered off the PM domain, potentially introducing unnecessary latency. However, in most cases, saving/restoring register contexts for devices are typically fast operations or can be optimized in device specific ways (e.g. shadow copies of register contents in memory, device-specific checks to see if context has been lost before restoring context, etc.). Still, in some cases the driver/subsystem may suffer from latency if runtime PM is used in a very fine-grained manner (e.g. for each IO request or xfer). To prevent that extra overhead, the driver/subsystem may deploy the runtime PM autosuspend feature. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-18 07:17:53 -06:00
|| genpd->prepared_count > 0)
return 0;
if (atomic_read(&genpd->sd_count) > 0)
return -EBUSY;
list_for_each_entry(pdd, &genpd->dev_list, list_node) {
enum pm_qos_flags_status stat;
stat = dev_pm_qos_flags(pdd->dev,
PM_QOS_FLAG_NO_POWER_OFF
| PM_QOS_FLAG_REMOTE_WAKEUP);
if (stat > PM_QOS_FLAGS_NONE)
return -EBUSY;
if (!pm_runtime_suspended(pdd->dev) || pdd->dev->power.irq_safe)
not_suspended++;
}
if (not_suspended > 1 || (not_suspended == 1 && is_async))
return -EBUSY;
if (genpd->gov && genpd->gov->power_down_ok) {
if (!genpd->gov->power_down_ok(&genpd->domain))
return -EAGAIN;
}
if (genpd->power_off) {
PM / Domains: Remove intermediate states from the power off sequence Genpd's ->runtime_suspend() (assigned to pm_genpd_runtime_suspend()) doesn't immediately walk the hierarchy of ->runtime_suspend() callbacks. Instead, pm_genpd_runtime_suspend() calls pm_genpd_poweroff() which postpones that until *all* the devices in the genpd are runtime suspended. When pm_genpd_poweroff() discovers that the last device in the genpd is about to be runtime suspended, it calls __pm_genpd_save_device() for *all* the devices in the genpd sequentially. Furthermore, __pm_genpd_save_device() invokes the ->start() callback, walks the hierarchy of the ->runtime_suspend() callbacks and invokes the ->stop() callback. This causes a "thundering herd" problem. Let's address this issue by having pm_genpd_runtime_suspend() immediately walk the hierarchy of the ->runtime_suspend() callbacks, instead of postponing that to the power off sequence via pm_genpd_poweroff(). If the selected ->runtime_suspend() callback doesn't return an error code, call pm_genpd_poweroff() to see if it's feasible to also power off the PM domain. Adopting this change enables us to simplify parts of the code in genpd, for example the locking mechanism. Additionally, it gives some positive side effects, as described below. i) One device's ->runtime_resume() latency is no longer affected by other devices' latencies in a genpd. The complexity genpd has to support the option to abort the power off sequence suffers from latency issues. More precisely, a device that is requested to be runtime resumed, may end up waiting for __pm_genpd_save_device() to complete its operations for *another* device. That's because pm_genpd_poweroff() can't confirm an abort request while it waits for __pm_genpd_save_device() to return. As this patch removes the intermediate states in pm_genpd_poweroff() while powering off the PM domain, we no longer need the ability to abort that sequence. ii) Make pm_runtime[_status]_suspended() reliable when used with genpd. Until the last device in a genpd becomes idle, pm_genpd_runtime_suspend() will return 0 without actually walking the hierarchy of the ->runtime_suspend() callbacks. However, by returning 0 the runtime PM core considers the device as runtime_suspended, so pm_runtime[_status]_suspended() will return true, even though the device isn't (yet) runtime suspended. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, pm_runtime[_status]_suspended() will accurately reflect the status of the device. iii) Enable fine-grained PM through runtime PM callbacks in drivers/subsystems. There are currently cases were drivers/subsystems implements runtime PM callbacks to deploy fine-grained PM (e.g. gate clocks, move pinctrl to power-save state, etc.). While using the genpd, pm_genpd_runtime_suspend() postpones invoking these callbacks until *all* the devices in the genpd are runtime suspended. In essence, one runtime resumed device prevents fine-grained PM for other devices within the same genpd. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, fine-grained PM is enabled throughout all the levels of runtime PM callbacks. iiii) Enable fine-grained PM for IRQ safe devices Per the definition for an IRQ safe device, its runtime PM callbacks must be able to execute in atomic context. In the path while genpd walks the hierarchy of the ->runtime_suspend() callbacks for the device, it uses a mutex. Therefore, genpd prevents that path to be executed for IRQ safe devices. As this patch changes pm_genpd_runtime_suspend() to immediately walk the hierarchy of the ->runtime_suspend() callbacks and without needing to use a mutex, fine-grained PM is enabled throughout all the levels of runtime PM callbacks for IRQ safe devices. Unfortunately this patch also comes with a drawback, as described in the summary below. Driver's/subsystem's runtime PM callbacks may be invoked even when the genpd hasn't actually powered off the PM domain, potentially introducing unnecessary latency. However, in most cases, saving/restoring register contexts for devices are typically fast operations or can be optimized in device specific ways (e.g. shadow copies of register contents in memory, device-specific checks to see if context has been lost before restoring context, etc.). Still, in some cases the driver/subsystem may suffer from latency if runtime PM is used in a very fine-grained manner (e.g. for each IO request or xfer). To prevent that extra overhead, the driver/subsystem may deploy the runtime PM autosuspend feature. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-18 07:17:53 -06:00
int ret;
if (atomic_read(&genpd->sd_count) > 0)
return -EBUSY;
/*
PM / Domains: Allow generic PM domains to have multiple masters Currently, for a given generic PM domain there may be only one parent domain (i.e. a PM domain it depends on). However, there is at least one real-life case in which there should be two parents (masters) for one PM domain (the A3RV domain on SH7372 turns out to depend on the A4LC domain and it depends on the A4R domain and the same time). For this reason, allow a PM domain to have multiple parents (masters) by introducing objects representing links between PM domains. The (logical) links between PM domains represent relationships in which one domain is a master (i.e. it is depended on) and another domain is a slave (i.e. it depends on the master) with the rule that the slave cannot be powered on if the master is not powered on and the master cannot be powered off if the slave is not powered off. Each struct generic_pm_domain object representing a PM domain has two lists of links, a list of links in which it is a master and a list of links in which it is a slave. The first of these lists replaces the list of subdomains and the second one is used in place of the parent pointer. Each link is represented by struct gpd_link object containing pointers to the master and the slave and two struct list_head members allowing it to hook into two lists (the master's list of "master" links and the slave's list of "slave" links). This allows the code to get to the link from each side (either from the master or from the slave) and follow it in each direction. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-08-08 15:43:40 -06:00
* If sd_count > 0 at this point, one of the subdomains hasn't
* managed to call genpd_poweron() for the master yet after
* incrementing it. In that case genpd_poweron() will wait
* for us to drop the lock, so we can call .power_off() and let
* the genpd_poweron() restore power for us (this shouldn't
* happen very often).
*/
ret = genpd_power_off(genpd, true);
PM / Domains: Remove intermediate states from the power off sequence Genpd's ->runtime_suspend() (assigned to pm_genpd_runtime_suspend()) doesn't immediately walk the hierarchy of ->runtime_suspend() callbacks. Instead, pm_genpd_runtime_suspend() calls pm_genpd_poweroff() which postpones that until *all* the devices in the genpd are runtime suspended. When pm_genpd_poweroff() discovers that the last device in the genpd is about to be runtime suspended, it calls __pm_genpd_save_device() for *all* the devices in the genpd sequentially. Furthermore, __pm_genpd_save_device() invokes the ->start() callback, walks the hierarchy of the ->runtime_suspend() callbacks and invokes the ->stop() callback. This causes a "thundering herd" problem. Let's address this issue by having pm_genpd_runtime_suspend() immediately walk the hierarchy of the ->runtime_suspend() callbacks, instead of postponing that to the power off sequence via pm_genpd_poweroff(). If the selected ->runtime_suspend() callback doesn't return an error code, call pm_genpd_poweroff() to see if it's feasible to also power off the PM domain. Adopting this change enables us to simplify parts of the code in genpd, for example the locking mechanism. Additionally, it gives some positive side effects, as described below. i) One device's ->runtime_resume() latency is no longer affected by other devices' latencies in a genpd. The complexity genpd has to support the option to abort the power off sequence suffers from latency issues. More precisely, a device that is requested to be runtime resumed, may end up waiting for __pm_genpd_save_device() to complete its operations for *another* device. That's because pm_genpd_poweroff() can't confirm an abort request while it waits for __pm_genpd_save_device() to return. As this patch removes the intermediate states in pm_genpd_poweroff() while powering off the PM domain, we no longer need the ability to abort that sequence. ii) Make pm_runtime[_status]_suspended() reliable when used with genpd. Until the last device in a genpd becomes idle, pm_genpd_runtime_suspend() will return 0 without actually walking the hierarchy of the ->runtime_suspend() callbacks. However, by returning 0 the runtime PM core considers the device as runtime_suspended, so pm_runtime[_status]_suspended() will return true, even though the device isn't (yet) runtime suspended. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, pm_runtime[_status]_suspended() will accurately reflect the status of the device. iii) Enable fine-grained PM through runtime PM callbacks in drivers/subsystems. There are currently cases were drivers/subsystems implements runtime PM callbacks to deploy fine-grained PM (e.g. gate clocks, move pinctrl to power-save state, etc.). While using the genpd, pm_genpd_runtime_suspend() postpones invoking these callbacks until *all* the devices in the genpd are runtime suspended. In essence, one runtime resumed device prevents fine-grained PM for other devices within the same genpd. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, fine-grained PM is enabled throughout all the levels of runtime PM callbacks. iiii) Enable fine-grained PM for IRQ safe devices Per the definition for an IRQ safe device, its runtime PM callbacks must be able to execute in atomic context. In the path while genpd walks the hierarchy of the ->runtime_suspend() callbacks for the device, it uses a mutex. Therefore, genpd prevents that path to be executed for IRQ safe devices. As this patch changes pm_genpd_runtime_suspend() to immediately walk the hierarchy of the ->runtime_suspend() callbacks and without needing to use a mutex, fine-grained PM is enabled throughout all the levels of runtime PM callbacks for IRQ safe devices. Unfortunately this patch also comes with a drawback, as described in the summary below. Driver's/subsystem's runtime PM callbacks may be invoked even when the genpd hasn't actually powered off the PM domain, potentially introducing unnecessary latency. However, in most cases, saving/restoring register contexts for devices are typically fast operations or can be optimized in device specific ways (e.g. shadow copies of register contents in memory, device-specific checks to see if context has been lost before restoring context, etc.). Still, in some cases the driver/subsystem may suffer from latency if runtime PM is used in a very fine-grained manner (e.g. for each IO request or xfer). To prevent that extra overhead, the driver/subsystem may deploy the runtime PM autosuspend feature. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-18 07:17:53 -06:00
if (ret)
return ret;
}
genpd->status = GPD_STATE_POWER_OFF;
PM / Domains: Allow generic PM domains to have multiple masters Currently, for a given generic PM domain there may be only one parent domain (i.e. a PM domain it depends on). However, there is at least one real-life case in which there should be two parents (masters) for one PM domain (the A3RV domain on SH7372 turns out to depend on the A4LC domain and it depends on the A4R domain and the same time). For this reason, allow a PM domain to have multiple parents (masters) by introducing objects representing links between PM domains. The (logical) links between PM domains represent relationships in which one domain is a master (i.e. it is depended on) and another domain is a slave (i.e. it depends on the master) with the rule that the slave cannot be powered on if the master is not powered on and the master cannot be powered off if the slave is not powered off. Each struct generic_pm_domain object representing a PM domain has two lists of links, a list of links in which it is a master and a list of links in which it is a slave. The first of these lists replaces the list of subdomains and the second one is used in place of the parent pointer. Each link is represented by struct gpd_link object containing pointers to the master and the slave and two struct list_head members allowing it to hook into two lists (the master's list of "master" links and the slave's list of "slave" links). This allows the code to get to the link from each side (either from the master or from the slave) and follow it in each direction. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-08-08 15:43:40 -06:00
list_for_each_entry(link, &genpd->slave_links, slave_node) {
genpd_sd_counter_dec(link->master);
genpd_queue_power_off_work(link->master);
}
PM / Domains: Remove intermediate states from the power off sequence Genpd's ->runtime_suspend() (assigned to pm_genpd_runtime_suspend()) doesn't immediately walk the hierarchy of ->runtime_suspend() callbacks. Instead, pm_genpd_runtime_suspend() calls pm_genpd_poweroff() which postpones that until *all* the devices in the genpd are runtime suspended. When pm_genpd_poweroff() discovers that the last device in the genpd is about to be runtime suspended, it calls __pm_genpd_save_device() for *all* the devices in the genpd sequentially. Furthermore, __pm_genpd_save_device() invokes the ->start() callback, walks the hierarchy of the ->runtime_suspend() callbacks and invokes the ->stop() callback. This causes a "thundering herd" problem. Let's address this issue by having pm_genpd_runtime_suspend() immediately walk the hierarchy of the ->runtime_suspend() callbacks, instead of postponing that to the power off sequence via pm_genpd_poweroff(). If the selected ->runtime_suspend() callback doesn't return an error code, call pm_genpd_poweroff() to see if it's feasible to also power off the PM domain. Adopting this change enables us to simplify parts of the code in genpd, for example the locking mechanism. Additionally, it gives some positive side effects, as described below. i) One device's ->runtime_resume() latency is no longer affected by other devices' latencies in a genpd. The complexity genpd has to support the option to abort the power off sequence suffers from latency issues. More precisely, a device that is requested to be runtime resumed, may end up waiting for __pm_genpd_save_device() to complete its operations for *another* device. That's because pm_genpd_poweroff() can't confirm an abort request while it waits for __pm_genpd_save_device() to return. As this patch removes the intermediate states in pm_genpd_poweroff() while powering off the PM domain, we no longer need the ability to abort that sequence. ii) Make pm_runtime[_status]_suspended() reliable when used with genpd. Until the last device in a genpd becomes idle, pm_genpd_runtime_suspend() will return 0 without actually walking the hierarchy of the ->runtime_suspend() callbacks. However, by returning 0 the runtime PM core considers the device as runtime_suspended, so pm_runtime[_status]_suspended() will return true, even though the device isn't (yet) runtime suspended. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, pm_runtime[_status]_suspended() will accurately reflect the status of the device. iii) Enable fine-grained PM through runtime PM callbacks in drivers/subsystems. There are currently cases were drivers/subsystems implements runtime PM callbacks to deploy fine-grained PM (e.g. gate clocks, move pinctrl to power-save state, etc.). While using the genpd, pm_genpd_runtime_suspend() postpones invoking these callbacks until *all* the devices in the genpd are runtime suspended. In essence, one runtime resumed device prevents fine-grained PM for other devices within the same genpd. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, fine-grained PM is enabled throughout all the levels of runtime PM callbacks. iiii) Enable fine-grained PM for IRQ safe devices Per the definition for an IRQ safe device, its runtime PM callbacks must be able to execute in atomic context. In the path while genpd walks the hierarchy of the ->runtime_suspend() callbacks for the device, it uses a mutex. Therefore, genpd prevents that path to be executed for IRQ safe devices. As this patch changes pm_genpd_runtime_suspend() to immediately walk the hierarchy of the ->runtime_suspend() callbacks and without needing to use a mutex, fine-grained PM is enabled throughout all the levels of runtime PM callbacks for IRQ safe devices. Unfortunately this patch also comes with a drawback, as described in the summary below. Driver's/subsystem's runtime PM callbacks may be invoked even when the genpd hasn't actually powered off the PM domain, potentially introducing unnecessary latency. However, in most cases, saving/restoring register contexts for devices are typically fast operations or can be optimized in device specific ways (e.g. shadow copies of register contents in memory, device-specific checks to see if context has been lost before restoring context, etc.). Still, in some cases the driver/subsystem may suffer from latency if runtime PM is used in a very fine-grained manner (e.g. for each IO request or xfer). To prevent that extra overhead, the driver/subsystem may deploy the runtime PM autosuspend feature. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-18 07:17:53 -06:00
return 0;
}
/**
* genpd_power_off_work_fn - Power off PM domain whose subdomain count is 0.
* @work: Work structure used for scheduling the execution of this function.
*/
static void genpd_power_off_work_fn(struct work_struct *work)
{
struct generic_pm_domain *genpd;
genpd = container_of(work, struct generic_pm_domain, power_off_work);
PM / Domains: Remove intermediate states from the power off sequence Genpd's ->runtime_suspend() (assigned to pm_genpd_runtime_suspend()) doesn't immediately walk the hierarchy of ->runtime_suspend() callbacks. Instead, pm_genpd_runtime_suspend() calls pm_genpd_poweroff() which postpones that until *all* the devices in the genpd are runtime suspended. When pm_genpd_poweroff() discovers that the last device in the genpd is about to be runtime suspended, it calls __pm_genpd_save_device() for *all* the devices in the genpd sequentially. Furthermore, __pm_genpd_save_device() invokes the ->start() callback, walks the hierarchy of the ->runtime_suspend() callbacks and invokes the ->stop() callback. This causes a "thundering herd" problem. Let's address this issue by having pm_genpd_runtime_suspend() immediately walk the hierarchy of the ->runtime_suspend() callbacks, instead of postponing that to the power off sequence via pm_genpd_poweroff(). If the selected ->runtime_suspend() callback doesn't return an error code, call pm_genpd_poweroff() to see if it's feasible to also power off the PM domain. Adopting this change enables us to simplify parts of the code in genpd, for example the locking mechanism. Additionally, it gives some positive side effects, as described below. i) One device's ->runtime_resume() latency is no longer affected by other devices' latencies in a genpd. The complexity genpd has to support the option to abort the power off sequence suffers from latency issues. More precisely, a device that is requested to be runtime resumed, may end up waiting for __pm_genpd_save_device() to complete its operations for *another* device. That's because pm_genpd_poweroff() can't confirm an abort request while it waits for __pm_genpd_save_device() to return. As this patch removes the intermediate states in pm_genpd_poweroff() while powering off the PM domain, we no longer need the ability to abort that sequence. ii) Make pm_runtime[_status]_suspended() reliable when used with genpd. Until the last device in a genpd becomes idle, pm_genpd_runtime_suspend() will return 0 without actually walking the hierarchy of the ->runtime_suspend() callbacks. However, by returning 0 the runtime PM core considers the device as runtime_suspended, so pm_runtime[_status]_suspended() will return true, even though the device isn't (yet) runtime suspended. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, pm_runtime[_status]_suspended() will accurately reflect the status of the device. iii) Enable fine-grained PM through runtime PM callbacks in drivers/subsystems. There are currently cases were drivers/subsystems implements runtime PM callbacks to deploy fine-grained PM (e.g. gate clocks, move pinctrl to power-save state, etc.). While using the genpd, pm_genpd_runtime_suspend() postpones invoking these callbacks until *all* the devices in the genpd are runtime suspended. In essence, one runtime resumed device prevents fine-grained PM for other devices within the same genpd. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, fine-grained PM is enabled throughout all the levels of runtime PM callbacks. iiii) Enable fine-grained PM for IRQ safe devices Per the definition for an IRQ safe device, its runtime PM callbacks must be able to execute in atomic context. In the path while genpd walks the hierarchy of the ->runtime_suspend() callbacks for the device, it uses a mutex. Therefore, genpd prevents that path to be executed for IRQ safe devices. As this patch changes pm_genpd_runtime_suspend() to immediately walk the hierarchy of the ->runtime_suspend() callbacks and without needing to use a mutex, fine-grained PM is enabled throughout all the levels of runtime PM callbacks for IRQ safe devices. Unfortunately this patch also comes with a drawback, as described in the summary below. Driver's/subsystem's runtime PM callbacks may be invoked even when the genpd hasn't actually powered off the PM domain, potentially introducing unnecessary latency. However, in most cases, saving/restoring register contexts for devices are typically fast operations or can be optimized in device specific ways (e.g. shadow copies of register contents in memory, device-specific checks to see if context has been lost before restoring context, etc.). Still, in some cases the driver/subsystem may suffer from latency if runtime PM is used in a very fine-grained manner (e.g. for each IO request or xfer). To prevent that extra overhead, the driver/subsystem may deploy the runtime PM autosuspend feature. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-18 07:17:53 -06:00
mutex_lock(&genpd->lock);
genpd_poweroff(genpd, true);
PM / Domains: Remove intermediate states from the power off sequence Genpd's ->runtime_suspend() (assigned to pm_genpd_runtime_suspend()) doesn't immediately walk the hierarchy of ->runtime_suspend() callbacks. Instead, pm_genpd_runtime_suspend() calls pm_genpd_poweroff() which postpones that until *all* the devices in the genpd are runtime suspended. When pm_genpd_poweroff() discovers that the last device in the genpd is about to be runtime suspended, it calls __pm_genpd_save_device() for *all* the devices in the genpd sequentially. Furthermore, __pm_genpd_save_device() invokes the ->start() callback, walks the hierarchy of the ->runtime_suspend() callbacks and invokes the ->stop() callback. This causes a "thundering herd" problem. Let's address this issue by having pm_genpd_runtime_suspend() immediately walk the hierarchy of the ->runtime_suspend() callbacks, instead of postponing that to the power off sequence via pm_genpd_poweroff(). If the selected ->runtime_suspend() callback doesn't return an error code, call pm_genpd_poweroff() to see if it's feasible to also power off the PM domain. Adopting this change enables us to simplify parts of the code in genpd, for example the locking mechanism. Additionally, it gives some positive side effects, as described below. i) One device's ->runtime_resume() latency is no longer affected by other devices' latencies in a genpd. The complexity genpd has to support the option to abort the power off sequence suffers from latency issues. More precisely, a device that is requested to be runtime resumed, may end up waiting for __pm_genpd_save_device() to complete its operations for *another* device. That's because pm_genpd_poweroff() can't confirm an abort request while it waits for __pm_genpd_save_device() to return. As this patch removes the intermediate states in pm_genpd_poweroff() while powering off the PM domain, we no longer need the ability to abort that sequence. ii) Make pm_runtime[_status]_suspended() reliable when used with genpd. Until the last device in a genpd becomes idle, pm_genpd_runtime_suspend() will return 0 without actually walking the hierarchy of the ->runtime_suspend() callbacks. However, by returning 0 the runtime PM core considers the device as runtime_suspended, so pm_runtime[_status]_suspended() will return true, even though the device isn't (yet) runtime suspended. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, pm_runtime[_status]_suspended() will accurately reflect the status of the device. iii) Enable fine-grained PM through runtime PM callbacks in drivers/subsystems. There are currently cases were drivers/subsystems implements runtime PM callbacks to deploy fine-grained PM (e.g. gate clocks, move pinctrl to power-save state, etc.). While using the genpd, pm_genpd_runtime_suspend() postpones invoking these callbacks until *all* the devices in the genpd are runtime suspended. In essence, one runtime resumed device prevents fine-grained PM for other devices within the same genpd. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, fine-grained PM is enabled throughout all the levels of runtime PM callbacks. iiii) Enable fine-grained PM for IRQ safe devices Per the definition for an IRQ safe device, its runtime PM callbacks must be able to execute in atomic context. In the path while genpd walks the hierarchy of the ->runtime_suspend() callbacks for the device, it uses a mutex. Therefore, genpd prevents that path to be executed for IRQ safe devices. As this patch changes pm_genpd_runtime_suspend() to immediately walk the hierarchy of the ->runtime_suspend() callbacks and without needing to use a mutex, fine-grained PM is enabled throughout all the levels of runtime PM callbacks for IRQ safe devices. Unfortunately this patch also comes with a drawback, as described in the summary below. Driver's/subsystem's runtime PM callbacks may be invoked even when the genpd hasn't actually powered off the PM domain, potentially introducing unnecessary latency. However, in most cases, saving/restoring register contexts for devices are typically fast operations or can be optimized in device specific ways (e.g. shadow copies of register contents in memory, device-specific checks to see if context has been lost before restoring context, etc.). Still, in some cases the driver/subsystem may suffer from latency if runtime PM is used in a very fine-grained manner (e.g. for each IO request or xfer). To prevent that extra overhead, the driver/subsystem may deploy the runtime PM autosuspend feature. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-18 07:17:53 -06:00
mutex_unlock(&genpd->lock);
}
/**
* pm_genpd_runtime_suspend - Suspend a device belonging to I/O PM domain.
* @dev: Device to suspend.
*
* Carry out a runtime suspend of a device under the assumption that its
* pm_domain field points to the domain member of an object of type
* struct generic_pm_domain representing a PM domain consisting of I/O devices.
*/
static int pm_genpd_runtime_suspend(struct device *dev)
{
struct generic_pm_domain *genpd;
bool (*stop_ok)(struct device *__dev);
struct gpd_timing_data *td = &dev_gpd_data(dev)->td;
ktime_t time_start;
s64 elapsed_ns;
int ret;
dev_dbg(dev, "%s()\n", __func__);
genpd = dev_to_genpd(dev);
if (IS_ERR(genpd))
return -EINVAL;
stop_ok = genpd->gov ? genpd->gov->stop_ok : NULL;
if (stop_ok && !stop_ok(dev))
return -EBUSY;
/* Measure suspend latency. */
time_start = ktime_get();
PM / Domains: Remove intermediate states from the power off sequence Genpd's ->runtime_suspend() (assigned to pm_genpd_runtime_suspend()) doesn't immediately walk the hierarchy of ->runtime_suspend() callbacks. Instead, pm_genpd_runtime_suspend() calls pm_genpd_poweroff() which postpones that until *all* the devices in the genpd are runtime suspended. When pm_genpd_poweroff() discovers that the last device in the genpd is about to be runtime suspended, it calls __pm_genpd_save_device() for *all* the devices in the genpd sequentially. Furthermore, __pm_genpd_save_device() invokes the ->start() callback, walks the hierarchy of the ->runtime_suspend() callbacks and invokes the ->stop() callback. This causes a "thundering herd" problem. Let's address this issue by having pm_genpd_runtime_suspend() immediately walk the hierarchy of the ->runtime_suspend() callbacks, instead of postponing that to the power off sequence via pm_genpd_poweroff(). If the selected ->runtime_suspend() callback doesn't return an error code, call pm_genpd_poweroff() to see if it's feasible to also power off the PM domain. Adopting this change enables us to simplify parts of the code in genpd, for example the locking mechanism. Additionally, it gives some positive side effects, as described below. i) One device's ->runtime_resume() latency is no longer affected by other devices' latencies in a genpd. The complexity genpd has to support the option to abort the power off sequence suffers from latency issues. More precisely, a device that is requested to be runtime resumed, may end up waiting for __pm_genpd_save_device() to complete its operations for *another* device. That's because pm_genpd_poweroff() can't confirm an abort request while it waits for __pm_genpd_save_device() to return. As this patch removes the intermediate states in pm_genpd_poweroff() while powering off the PM domain, we no longer need the ability to abort that sequence. ii) Make pm_runtime[_status]_suspended() reliable when used with genpd. Until the last device in a genpd becomes idle, pm_genpd_runtime_suspend() will return 0 without actually walking the hierarchy of the ->runtime_suspend() callbacks. However, by returning 0 the runtime PM core considers the device as runtime_suspended, so pm_runtime[_status]_suspended() will return true, even though the device isn't (yet) runtime suspended. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, pm_runtime[_status]_suspended() will accurately reflect the status of the device. iii) Enable fine-grained PM through runtime PM callbacks in drivers/subsystems. There are currently cases were drivers/subsystems implements runtime PM callbacks to deploy fine-grained PM (e.g. gate clocks, move pinctrl to power-save state, etc.). While using the genpd, pm_genpd_runtime_suspend() postpones invoking these callbacks until *all* the devices in the genpd are runtime suspended. In essence, one runtime resumed device prevents fine-grained PM for other devices within the same genpd. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, fine-grained PM is enabled throughout all the levels of runtime PM callbacks. iiii) Enable fine-grained PM for IRQ safe devices Per the definition for an IRQ safe device, its runtime PM callbacks must be able to execute in atomic context. In the path while genpd walks the hierarchy of the ->runtime_suspend() callbacks for the device, it uses a mutex. Therefore, genpd prevents that path to be executed for IRQ safe devices. As this patch changes pm_genpd_runtime_suspend() to immediately walk the hierarchy of the ->runtime_suspend() callbacks and without needing to use a mutex, fine-grained PM is enabled throughout all the levels of runtime PM callbacks for IRQ safe devices. Unfortunately this patch also comes with a drawback, as described in the summary below. Driver's/subsystem's runtime PM callbacks may be invoked even when the genpd hasn't actually powered off the PM domain, potentially introducing unnecessary latency. However, in most cases, saving/restoring register contexts for devices are typically fast operations or can be optimized in device specific ways (e.g. shadow copies of register contents in memory, device-specific checks to see if context has been lost before restoring context, etc.). Still, in some cases the driver/subsystem may suffer from latency if runtime PM is used in a very fine-grained manner (e.g. for each IO request or xfer). To prevent that extra overhead, the driver/subsystem may deploy the runtime PM autosuspend feature. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-18 07:17:53 -06:00
ret = genpd_save_dev(genpd, dev);
if (ret)
return ret;
ret = genpd_stop_dev(genpd, dev);
PM / Domains: Remove intermediate states from the power off sequence Genpd's ->runtime_suspend() (assigned to pm_genpd_runtime_suspend()) doesn't immediately walk the hierarchy of ->runtime_suspend() callbacks. Instead, pm_genpd_runtime_suspend() calls pm_genpd_poweroff() which postpones that until *all* the devices in the genpd are runtime suspended. When pm_genpd_poweroff() discovers that the last device in the genpd is about to be runtime suspended, it calls __pm_genpd_save_device() for *all* the devices in the genpd sequentially. Furthermore, __pm_genpd_save_device() invokes the ->start() callback, walks the hierarchy of the ->runtime_suspend() callbacks and invokes the ->stop() callback. This causes a "thundering herd" problem. Let's address this issue by having pm_genpd_runtime_suspend() immediately walk the hierarchy of the ->runtime_suspend() callbacks, instead of postponing that to the power off sequence via pm_genpd_poweroff(). If the selected ->runtime_suspend() callback doesn't return an error code, call pm_genpd_poweroff() to see if it's feasible to also power off the PM domain. Adopting this change enables us to simplify parts of the code in genpd, for example the locking mechanism. Additionally, it gives some positive side effects, as described below. i) One device's ->runtime_resume() latency is no longer affected by other devices' latencies in a genpd. The complexity genpd has to support the option to abort the power off sequence suffers from latency issues. More precisely, a device that is requested to be runtime resumed, may end up waiting for __pm_genpd_save_device() to complete its operations for *another* device. That's because pm_genpd_poweroff() can't confirm an abort request while it waits for __pm_genpd_save_device() to return. As this patch removes the intermediate states in pm_genpd_poweroff() while powering off the PM domain, we no longer need the ability to abort that sequence. ii) Make pm_runtime[_status]_suspended() reliable when used with genpd. Until the last device in a genpd becomes idle, pm_genpd_runtime_suspend() will return 0 without actually walking the hierarchy of the ->runtime_suspend() callbacks. However, by returning 0 the runtime PM core considers the device as runtime_suspended, so pm_runtime[_status]_suspended() will return true, even though the device isn't (yet) runtime suspended. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, pm_runtime[_status]_suspended() will accurately reflect the status of the device. iii) Enable fine-grained PM through runtime PM callbacks in drivers/subsystems. There are currently cases were drivers/subsystems implements runtime PM callbacks to deploy fine-grained PM (e.g. gate clocks, move pinctrl to power-save state, etc.). While using the genpd, pm_genpd_runtime_suspend() postpones invoking these callbacks until *all* the devices in the genpd are runtime suspended. In essence, one runtime resumed device prevents fine-grained PM for other devices within the same genpd. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, fine-grained PM is enabled throughout all the levels of runtime PM callbacks. iiii) Enable fine-grained PM for IRQ safe devices Per the definition for an IRQ safe device, its runtime PM callbacks must be able to execute in atomic context. In the path while genpd walks the hierarchy of the ->runtime_suspend() callbacks for the device, it uses a mutex. Therefore, genpd prevents that path to be executed for IRQ safe devices. As this patch changes pm_genpd_runtime_suspend() to immediately walk the hierarchy of the ->runtime_suspend() callbacks and without needing to use a mutex, fine-grained PM is enabled throughout all the levels of runtime PM callbacks for IRQ safe devices. Unfortunately this patch also comes with a drawback, as described in the summary below. Driver's/subsystem's runtime PM callbacks may be invoked even when the genpd hasn't actually powered off the PM domain, potentially introducing unnecessary latency. However, in most cases, saving/restoring register contexts for devices are typically fast operations or can be optimized in device specific ways (e.g. shadow copies of register contents in memory, device-specific checks to see if context has been lost before restoring context, etc.). Still, in some cases the driver/subsystem may suffer from latency if runtime PM is used in a very fine-grained manner (e.g. for each IO request or xfer). To prevent that extra overhead, the driver/subsystem may deploy the runtime PM autosuspend feature. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-18 07:17:53 -06:00
if (ret) {
genpd_restore_dev(genpd, dev);
PM / Domains: Remove intermediate states from the power off sequence Genpd's ->runtime_suspend() (assigned to pm_genpd_runtime_suspend()) doesn't immediately walk the hierarchy of ->runtime_suspend() callbacks. Instead, pm_genpd_runtime_suspend() calls pm_genpd_poweroff() which postpones that until *all* the devices in the genpd are runtime suspended. When pm_genpd_poweroff() discovers that the last device in the genpd is about to be runtime suspended, it calls __pm_genpd_save_device() for *all* the devices in the genpd sequentially. Furthermore, __pm_genpd_save_device() invokes the ->start() callback, walks the hierarchy of the ->runtime_suspend() callbacks and invokes the ->stop() callback. This causes a "thundering herd" problem. Let's address this issue by having pm_genpd_runtime_suspend() immediately walk the hierarchy of the ->runtime_suspend() callbacks, instead of postponing that to the power off sequence via pm_genpd_poweroff(). If the selected ->runtime_suspend() callback doesn't return an error code, call pm_genpd_poweroff() to see if it's feasible to also power off the PM domain. Adopting this change enables us to simplify parts of the code in genpd, for example the locking mechanism. Additionally, it gives some positive side effects, as described below. i) One device's ->runtime_resume() latency is no longer affected by other devices' latencies in a genpd. The complexity genpd has to support the option to abort the power off sequence suffers from latency issues. More precisely, a device that is requested to be runtime resumed, may end up waiting for __pm_genpd_save_device() to complete its operations for *another* device. That's because pm_genpd_poweroff() can't confirm an abort request while it waits for __pm_genpd_save_device() to return. As this patch removes the intermediate states in pm_genpd_poweroff() while powering off the PM domain, we no longer need the ability to abort that sequence. ii) Make pm_runtime[_status]_suspended() reliable when used with genpd. Until the last device in a genpd becomes idle, pm_genpd_runtime_suspend() will return 0 without actually walking the hierarchy of the ->runtime_suspend() callbacks. However, by returning 0 the runtime PM core considers the device as runtime_suspended, so pm_runtime[_status]_suspended() will return true, even though the device isn't (yet) runtime suspended. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, pm_runtime[_status]_suspended() will accurately reflect the status of the device. iii) Enable fine-grained PM through runtime PM callbacks in drivers/subsystems. There are currently cases were drivers/subsystems implements runtime PM callbacks to deploy fine-grained PM (e.g. gate clocks, move pinctrl to power-save state, etc.). While using the genpd, pm_genpd_runtime_suspend() postpones invoking these callbacks until *all* the devices in the genpd are runtime suspended. In essence, one runtime resumed device prevents fine-grained PM for other devices within the same genpd. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, fine-grained PM is enabled throughout all the levels of runtime PM callbacks. iiii) Enable fine-grained PM for IRQ safe devices Per the definition for an IRQ safe device, its runtime PM callbacks must be able to execute in atomic context. In the path while genpd walks the hierarchy of the ->runtime_suspend() callbacks for the device, it uses a mutex. Therefore, genpd prevents that path to be executed for IRQ safe devices. As this patch changes pm_genpd_runtime_suspend() to immediately walk the hierarchy of the ->runtime_suspend() callbacks and without needing to use a mutex, fine-grained PM is enabled throughout all the levels of runtime PM callbacks for IRQ safe devices. Unfortunately this patch also comes with a drawback, as described in the summary below. Driver's/subsystem's runtime PM callbacks may be invoked even when the genpd hasn't actually powered off the PM domain, potentially introducing unnecessary latency. However, in most cases, saving/restoring register contexts for devices are typically fast operations or can be optimized in device specific ways (e.g. shadow copies of register contents in memory, device-specific checks to see if context has been lost before restoring context, etc.). Still, in some cases the driver/subsystem may suffer from latency if runtime PM is used in a very fine-grained manner (e.g. for each IO request or xfer). To prevent that extra overhead, the driver/subsystem may deploy the runtime PM autosuspend feature. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-18 07:17:53 -06:00
return ret;
}
/* Update suspend latency value if the measured time exceeds it. */
elapsed_ns = ktime_to_ns(ktime_sub(ktime_get(), time_start));
if (elapsed_ns > td->suspend_latency_ns) {
td->suspend_latency_ns = elapsed_ns;
dev_dbg(dev, "suspend latency exceeded, %lld ns\n",
elapsed_ns);
genpd->max_off_time_changed = true;
td->constraint_changed = true;
}
/*
* If power.irq_safe is set, this routine will be run with interrupts
* off, so it can't use mutexes.
*/
if (dev->power.irq_safe)
return 0;
PM / Domains: Allow callbacks to execute all runtime PM helpers A deadlock may occur if one of the PM domains' .start_device() or .stop_device() callbacks or a device driver's .runtime_suspend() or .runtime_resume() callback executed by the core generic PM domain code uses a "wrong" runtime PM helper function. This happens, for example, if .runtime_resume() from one device's driver calls pm_runtime_resume() for another device in the same PM domain. A similar situation may take place if a device's parent is in the same PM domain, in which case the runtime PM framework may execute pm_genpd_runtime_resume() automatically for the parent (if it is suspended at the moment). This, of course, is undesirable, so the generic PM domains code should be modified to prevent it from happening. The runtime PM framework guarantees that pm_genpd_runtime_suspend() and pm_genpd_runtime_resume() won't be executed in parallel for the same device, so the generic PM domains code need not worry about those cases. Still, it needs to prevent the other possible race conditions between pm_genpd_runtime_suspend(), pm_genpd_runtime_resume(), pm_genpd_poweron() and pm_genpd_poweroff() from happening and it needs to avoid deadlocks at the same time. To this end, modify the generic PM domains code to relax synchronization rules so that: * pm_genpd_poweron() doesn't wait for the PM domain status to change from GPD_STATE_BUSY. If it finds that the status is not GPD_STATE_POWER_OFF, it returns without powering the domain on (it may modify the status depending on the circumstances). * pm_genpd_poweroff() returns as soon as it finds that the PM domain's status changed from GPD_STATE_BUSY after it's released the PM domain's lock. * pm_genpd_runtime_suspend() doesn't wait for the PM domain status to change from GPD_STATE_BUSY after executing the domain's .stop_device() callback and executes pm_genpd_poweroff() only if pm_genpd_runtime_resume() is not executed in parallel. * pm_genpd_runtime_resume() doesn't wait for the PM domain status to change from GPD_STATE_BUSY after executing pm_genpd_poweron() and sets the domain's status to GPD_STATE_BUSY and increments its counter of resuming devices (introduced by this change) immediately after acquiring the lock. The counter of resuming devices is then decremented after executing __pm_genpd_runtime_resume() for the device and the domain's status is reset to GPD_STATE_ACTIVE (unless there are more resuming devices in the domain, in which case the status remains GPD_STATE_BUSY). This way, for example, if a device driver's .runtime_resume() callback executes pm_runtime_resume() for another device in the same PM domain, pm_genpd_poweron() called by pm_genpd_runtime_resume() invoked by the runtime PM framework will not block and it will see that there's nothing to do for it. Next, the PM domain's lock will be acquired without waiting for its status to change from GPD_STATE_BUSY and the device driver's .runtime_resume() callback will be executed. In turn, if pm_runtime_suspend() is executed by one device driver's .runtime_resume() callback for another device in the same PM domain, pm_genpd_poweroff() executed by pm_genpd_runtime_suspend() invoked by the runtime PM framework as a result will notice that one of the devices in the domain is being resumed, so it will return immediately. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-11 16:39:36 -06:00
mutex_lock(&genpd->lock);
genpd_poweroff(genpd, false);
PM / Domains: Allow callbacks to execute all runtime PM helpers A deadlock may occur if one of the PM domains' .start_device() or .stop_device() callbacks or a device driver's .runtime_suspend() or .runtime_resume() callback executed by the core generic PM domain code uses a "wrong" runtime PM helper function. This happens, for example, if .runtime_resume() from one device's driver calls pm_runtime_resume() for another device in the same PM domain. A similar situation may take place if a device's parent is in the same PM domain, in which case the runtime PM framework may execute pm_genpd_runtime_resume() automatically for the parent (if it is suspended at the moment). This, of course, is undesirable, so the generic PM domains code should be modified to prevent it from happening. The runtime PM framework guarantees that pm_genpd_runtime_suspend() and pm_genpd_runtime_resume() won't be executed in parallel for the same device, so the generic PM domains code need not worry about those cases. Still, it needs to prevent the other possible race conditions between pm_genpd_runtime_suspend(), pm_genpd_runtime_resume(), pm_genpd_poweron() and pm_genpd_poweroff() from happening and it needs to avoid deadlocks at the same time. To this end, modify the generic PM domains code to relax synchronization rules so that: * pm_genpd_poweron() doesn't wait for the PM domain status to change from GPD_STATE_BUSY. If it finds that the status is not GPD_STATE_POWER_OFF, it returns without powering the domain on (it may modify the status depending on the circumstances). * pm_genpd_poweroff() returns as soon as it finds that the PM domain's status changed from GPD_STATE_BUSY after it's released the PM domain's lock. * pm_genpd_runtime_suspend() doesn't wait for the PM domain status to change from GPD_STATE_BUSY after executing the domain's .stop_device() callback and executes pm_genpd_poweroff() only if pm_genpd_runtime_resume() is not executed in parallel. * pm_genpd_runtime_resume() doesn't wait for the PM domain status to change from GPD_STATE_BUSY after executing pm_genpd_poweron() and sets the domain's status to GPD_STATE_BUSY and increments its counter of resuming devices (introduced by this change) immediately after acquiring the lock. The counter of resuming devices is then decremented after executing __pm_genpd_runtime_resume() for the device and the domain's status is reset to GPD_STATE_ACTIVE (unless there are more resuming devices in the domain, in which case the status remains GPD_STATE_BUSY). This way, for example, if a device driver's .runtime_resume() callback executes pm_runtime_resume() for another device in the same PM domain, pm_genpd_poweron() called by pm_genpd_runtime_resume() invoked by the runtime PM framework will not block and it will see that there's nothing to do for it. Next, the PM domain's lock will be acquired without waiting for its status to change from GPD_STATE_BUSY and the device driver's .runtime_resume() callback will be executed. In turn, if pm_runtime_suspend() is executed by one device driver's .runtime_resume() callback for another device in the same PM domain, pm_genpd_poweroff() executed by pm_genpd_runtime_suspend() invoked by the runtime PM framework as a result will notice that one of the devices in the domain is being resumed, so it will return immediately. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-11 16:39:36 -06:00
mutex_unlock(&genpd->lock);
return 0;
}
/**
* pm_genpd_runtime_resume - Resume a device belonging to I/O PM domain.
* @dev: Device to resume.
*
* Carry out a runtime resume of a device under the assumption that its
* pm_domain field points to the domain member of an object of type
* struct generic_pm_domain representing a PM domain consisting of I/O devices.
*/
static int pm_genpd_runtime_resume(struct device *dev)
{
struct generic_pm_domain *genpd;
struct gpd_timing_data *td = &dev_gpd_data(dev)->td;
ktime_t time_start;
s64 elapsed_ns;
int ret;
PM / Domains: Remove intermediate states from the power off sequence Genpd's ->runtime_suspend() (assigned to pm_genpd_runtime_suspend()) doesn't immediately walk the hierarchy of ->runtime_suspend() callbacks. Instead, pm_genpd_runtime_suspend() calls pm_genpd_poweroff() which postpones that until *all* the devices in the genpd are runtime suspended. When pm_genpd_poweroff() discovers that the last device in the genpd is about to be runtime suspended, it calls __pm_genpd_save_device() for *all* the devices in the genpd sequentially. Furthermore, __pm_genpd_save_device() invokes the ->start() callback, walks the hierarchy of the ->runtime_suspend() callbacks and invokes the ->stop() callback. This causes a "thundering herd" problem. Let's address this issue by having pm_genpd_runtime_suspend() immediately walk the hierarchy of the ->runtime_suspend() callbacks, instead of postponing that to the power off sequence via pm_genpd_poweroff(). If the selected ->runtime_suspend() callback doesn't return an error code, call pm_genpd_poweroff() to see if it's feasible to also power off the PM domain. Adopting this change enables us to simplify parts of the code in genpd, for example the locking mechanism. Additionally, it gives some positive side effects, as described below. i) One device's ->runtime_resume() latency is no longer affected by other devices' latencies in a genpd. The complexity genpd has to support the option to abort the power off sequence suffers from latency issues. More precisely, a device that is requested to be runtime resumed, may end up waiting for __pm_genpd_save_device() to complete its operations for *another* device. That's because pm_genpd_poweroff() can't confirm an abort request while it waits for __pm_genpd_save_device() to return. As this patch removes the intermediate states in pm_genpd_poweroff() while powering off the PM domain, we no longer need the ability to abort that sequence. ii) Make pm_runtime[_status]_suspended() reliable when used with genpd. Until the last device in a genpd becomes idle, pm_genpd_runtime_suspend() will return 0 without actually walking the hierarchy of the ->runtime_suspend() callbacks. However, by returning 0 the runtime PM core considers the device as runtime_suspended, so pm_runtime[_status]_suspended() will return true, even though the device isn't (yet) runtime suspended. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, pm_runtime[_status]_suspended() will accurately reflect the status of the device. iii) Enable fine-grained PM through runtime PM callbacks in drivers/subsystems. There are currently cases were drivers/subsystems implements runtime PM callbacks to deploy fine-grained PM (e.g. gate clocks, move pinctrl to power-save state, etc.). While using the genpd, pm_genpd_runtime_suspend() postpones invoking these callbacks until *all* the devices in the genpd are runtime suspended. In essence, one runtime resumed device prevents fine-grained PM for other devices within the same genpd. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, fine-grained PM is enabled throughout all the levels of runtime PM callbacks. iiii) Enable fine-grained PM for IRQ safe devices Per the definition for an IRQ safe device, its runtime PM callbacks must be able to execute in atomic context. In the path while genpd walks the hierarchy of the ->runtime_suspend() callbacks for the device, it uses a mutex. Therefore, genpd prevents that path to be executed for IRQ safe devices. As this patch changes pm_genpd_runtime_suspend() to immediately walk the hierarchy of the ->runtime_suspend() callbacks and without needing to use a mutex, fine-grained PM is enabled throughout all the levels of runtime PM callbacks for IRQ safe devices. Unfortunately this patch also comes with a drawback, as described in the summary below. Driver's/subsystem's runtime PM callbacks may be invoked even when the genpd hasn't actually powered off the PM domain, potentially introducing unnecessary latency. However, in most cases, saving/restoring register contexts for devices are typically fast operations or can be optimized in device specific ways (e.g. shadow copies of register contents in memory, device-specific checks to see if context has been lost before restoring context, etc.). Still, in some cases the driver/subsystem may suffer from latency if runtime PM is used in a very fine-grained manner (e.g. for each IO request or xfer). To prevent that extra overhead, the driver/subsystem may deploy the runtime PM autosuspend feature. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-18 07:17:53 -06:00
bool timed = true;
dev_dbg(dev, "%s()\n", __func__);
genpd = dev_to_genpd(dev);
if (IS_ERR(genpd))
return -EINVAL;
/* If power.irq_safe, the PM domain is never powered off. */
PM / Domains: Remove intermediate states from the power off sequence Genpd's ->runtime_suspend() (assigned to pm_genpd_runtime_suspend()) doesn't immediately walk the hierarchy of ->runtime_suspend() callbacks. Instead, pm_genpd_runtime_suspend() calls pm_genpd_poweroff() which postpones that until *all* the devices in the genpd are runtime suspended. When pm_genpd_poweroff() discovers that the last device in the genpd is about to be runtime suspended, it calls __pm_genpd_save_device() for *all* the devices in the genpd sequentially. Furthermore, __pm_genpd_save_device() invokes the ->start() callback, walks the hierarchy of the ->runtime_suspend() callbacks and invokes the ->stop() callback. This causes a "thundering herd" problem. Let's address this issue by having pm_genpd_runtime_suspend() immediately walk the hierarchy of the ->runtime_suspend() callbacks, instead of postponing that to the power off sequence via pm_genpd_poweroff(). If the selected ->runtime_suspend() callback doesn't return an error code, call pm_genpd_poweroff() to see if it's feasible to also power off the PM domain. Adopting this change enables us to simplify parts of the code in genpd, for example the locking mechanism. Additionally, it gives some positive side effects, as described below. i) One device's ->runtime_resume() latency is no longer affected by other devices' latencies in a genpd. The complexity genpd has to support the option to abort the power off sequence suffers from latency issues. More precisely, a device that is requested to be runtime resumed, may end up waiting for __pm_genpd_save_device() to complete its operations for *another* device. That's because pm_genpd_poweroff() can't confirm an abort request while it waits for __pm_genpd_save_device() to return. As this patch removes the intermediate states in pm_genpd_poweroff() while powering off the PM domain, we no longer need the ability to abort that sequence. ii) Make pm_runtime[_status]_suspended() reliable when used with genpd. Until the last device in a genpd becomes idle, pm_genpd_runtime_suspend() will return 0 without actually walking the hierarchy of the ->runtime_suspend() callbacks. However, by returning 0 the runtime PM core considers the device as runtime_suspended, so pm_runtime[_status]_suspended() will return true, even though the device isn't (yet) runtime suspended. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, pm_runtime[_status]_suspended() will accurately reflect the status of the device. iii) Enable fine-grained PM through runtime PM callbacks in drivers/subsystems. There are currently cases were drivers/subsystems implements runtime PM callbacks to deploy fine-grained PM (e.g. gate clocks, move pinctrl to power-save state, etc.). While using the genpd, pm_genpd_runtime_suspend() postpones invoking these callbacks until *all* the devices in the genpd are runtime suspended. In essence, one runtime resumed device prevents fine-grained PM for other devices within the same genpd. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, fine-grained PM is enabled throughout all the levels of runtime PM callbacks. iiii) Enable fine-grained PM for IRQ safe devices Per the definition for an IRQ safe device, its runtime PM callbacks must be able to execute in atomic context. In the path while genpd walks the hierarchy of the ->runtime_suspend() callbacks for the device, it uses a mutex. Therefore, genpd prevents that path to be executed for IRQ safe devices. As this patch changes pm_genpd_runtime_suspend() to immediately walk the hierarchy of the ->runtime_suspend() callbacks and without needing to use a mutex, fine-grained PM is enabled throughout all the levels of runtime PM callbacks for IRQ safe devices. Unfortunately this patch also comes with a drawback, as described in the summary below. Driver's/subsystem's runtime PM callbacks may be invoked even when the genpd hasn't actually powered off the PM domain, potentially introducing unnecessary latency. However, in most cases, saving/restoring register contexts for devices are typically fast operations or can be optimized in device specific ways (e.g. shadow copies of register contents in memory, device-specific checks to see if context has been lost before restoring context, etc.). Still, in some cases the driver/subsystem may suffer from latency if runtime PM is used in a very fine-grained manner (e.g. for each IO request or xfer). To prevent that extra overhead, the driver/subsystem may deploy the runtime PM autosuspend feature. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-18 07:17:53 -06:00
if (dev->power.irq_safe) {
timed = false;
goto out;
}
PM / Domains: Allow callbacks to execute all runtime PM helpers A deadlock may occur if one of the PM domains' .start_device() or .stop_device() callbacks or a device driver's .runtime_suspend() or .runtime_resume() callback executed by the core generic PM domain code uses a "wrong" runtime PM helper function. This happens, for example, if .runtime_resume() from one device's driver calls pm_runtime_resume() for another device in the same PM domain. A similar situation may take place if a device's parent is in the same PM domain, in which case the runtime PM framework may execute pm_genpd_runtime_resume() automatically for the parent (if it is suspended at the moment). This, of course, is undesirable, so the generic PM domains code should be modified to prevent it from happening. The runtime PM framework guarantees that pm_genpd_runtime_suspend() and pm_genpd_runtime_resume() won't be executed in parallel for the same device, so the generic PM domains code need not worry about those cases. Still, it needs to prevent the other possible race conditions between pm_genpd_runtime_suspend(), pm_genpd_runtime_resume(), pm_genpd_poweron() and pm_genpd_poweroff() from happening and it needs to avoid deadlocks at the same time. To this end, modify the generic PM domains code to relax synchronization rules so that: * pm_genpd_poweron() doesn't wait for the PM domain status to change from GPD_STATE_BUSY. If it finds that the status is not GPD_STATE_POWER_OFF, it returns without powering the domain on (it may modify the status depending on the circumstances). * pm_genpd_poweroff() returns as soon as it finds that the PM domain's status changed from GPD_STATE_BUSY after it's released the PM domain's lock. * pm_genpd_runtime_suspend() doesn't wait for the PM domain status to change from GPD_STATE_BUSY after executing the domain's .stop_device() callback and executes pm_genpd_poweroff() only if pm_genpd_runtime_resume() is not executed in parallel. * pm_genpd_runtime_resume() doesn't wait for the PM domain status to change from GPD_STATE_BUSY after executing pm_genpd_poweron() and sets the domain's status to GPD_STATE_BUSY and increments its counter of resuming devices (introduced by this change) immediately after acquiring the lock. The counter of resuming devices is then decremented after executing __pm_genpd_runtime_resume() for the device and the domain's status is reset to GPD_STATE_ACTIVE (unless there are more resuming devices in the domain, in which case the status remains GPD_STATE_BUSY). This way, for example, if a device driver's .runtime_resume() callback executes pm_runtime_resume() for another device in the same PM domain, pm_genpd_poweron() called by pm_genpd_runtime_resume() invoked by the runtime PM framework will not block and it will see that there's nothing to do for it. Next, the PM domain's lock will be acquired without waiting for its status to change from GPD_STATE_BUSY and the device driver's .runtime_resume() callback will be executed. In turn, if pm_runtime_suspend() is executed by one device driver's .runtime_resume() callback for another device in the same PM domain, pm_genpd_poweroff() executed by pm_genpd_runtime_suspend() invoked by the runtime PM framework as a result will notice that one of the devices in the domain is being resumed, so it will return immediately. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-11 16:39:36 -06:00
mutex_lock(&genpd->lock);
ret = __genpd_poweron(genpd);
PM / Domains: Remove intermediate states from the power off sequence Genpd's ->runtime_suspend() (assigned to pm_genpd_runtime_suspend()) doesn't immediately walk the hierarchy of ->runtime_suspend() callbacks. Instead, pm_genpd_runtime_suspend() calls pm_genpd_poweroff() which postpones that until *all* the devices in the genpd are runtime suspended. When pm_genpd_poweroff() discovers that the last device in the genpd is about to be runtime suspended, it calls __pm_genpd_save_device() for *all* the devices in the genpd sequentially. Furthermore, __pm_genpd_save_device() invokes the ->start() callback, walks the hierarchy of the ->runtime_suspend() callbacks and invokes the ->stop() callback. This causes a "thundering herd" problem. Let's address this issue by having pm_genpd_runtime_suspend() immediately walk the hierarchy of the ->runtime_suspend() callbacks, instead of postponing that to the power off sequence via pm_genpd_poweroff(). If the selected ->runtime_suspend() callback doesn't return an error code, call pm_genpd_poweroff() to see if it's feasible to also power off the PM domain. Adopting this change enables us to simplify parts of the code in genpd, for example the locking mechanism. Additionally, it gives some positive side effects, as described below. i) One device's ->runtime_resume() latency is no longer affected by other devices' latencies in a genpd. The complexity genpd has to support the option to abort the power off sequence suffers from latency issues. More precisely, a device that is requested to be runtime resumed, may end up waiting for __pm_genpd_save_device() to complete its operations for *another* device. That's because pm_genpd_poweroff() can't confirm an abort request while it waits for __pm_genpd_save_device() to return. As this patch removes the intermediate states in pm_genpd_poweroff() while powering off the PM domain, we no longer need the ability to abort that sequence. ii) Make pm_runtime[_status]_suspended() reliable when used with genpd. Until the last device in a genpd becomes idle, pm_genpd_runtime_suspend() will return 0 without actually walking the hierarchy of the ->runtime_suspend() callbacks. However, by returning 0 the runtime PM core considers the device as runtime_suspended, so pm_runtime[_status]_suspended() will return true, even though the device isn't (yet) runtime suspended. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, pm_runtime[_status]_suspended() will accurately reflect the status of the device. iii) Enable fine-grained PM through runtime PM callbacks in drivers/subsystems. There are currently cases were drivers/subsystems implements runtime PM callbacks to deploy fine-grained PM (e.g. gate clocks, move pinctrl to power-save state, etc.). While using the genpd, pm_genpd_runtime_suspend() postpones invoking these callbacks until *all* the devices in the genpd are runtime suspended. In essence, one runtime resumed device prevents fine-grained PM for other devices within the same genpd. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, fine-grained PM is enabled throughout all the levels of runtime PM callbacks. iiii) Enable fine-grained PM for IRQ safe devices Per the definition for an IRQ safe device, its runtime PM callbacks must be able to execute in atomic context. In the path while genpd walks the hierarchy of the ->runtime_suspend() callbacks for the device, it uses a mutex. Therefore, genpd prevents that path to be executed for IRQ safe devices. As this patch changes pm_genpd_runtime_suspend() to immediately walk the hierarchy of the ->runtime_suspend() callbacks and without needing to use a mutex, fine-grained PM is enabled throughout all the levels of runtime PM callbacks for IRQ safe devices. Unfortunately this patch also comes with a drawback, as described in the summary below. Driver's/subsystem's runtime PM callbacks may be invoked even when the genpd hasn't actually powered off the PM domain, potentially introducing unnecessary latency. However, in most cases, saving/restoring register contexts for devices are typically fast operations or can be optimized in device specific ways (e.g. shadow copies of register contents in memory, device-specific checks to see if context has been lost before restoring context, etc.). Still, in some cases the driver/subsystem may suffer from latency if runtime PM is used in a very fine-grained manner (e.g. for each IO request or xfer). To prevent that extra overhead, the driver/subsystem may deploy the runtime PM autosuspend feature. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-18 07:17:53 -06:00
mutex_unlock(&genpd->lock);
PM / Domains: Allow callbacks to execute all runtime PM helpers A deadlock may occur if one of the PM domains' .start_device() or .stop_device() callbacks or a device driver's .runtime_suspend() or .runtime_resume() callback executed by the core generic PM domain code uses a "wrong" runtime PM helper function. This happens, for example, if .runtime_resume() from one device's driver calls pm_runtime_resume() for another device in the same PM domain. A similar situation may take place if a device's parent is in the same PM domain, in which case the runtime PM framework may execute pm_genpd_runtime_resume() automatically for the parent (if it is suspended at the moment). This, of course, is undesirable, so the generic PM domains code should be modified to prevent it from happening. The runtime PM framework guarantees that pm_genpd_runtime_suspend() and pm_genpd_runtime_resume() won't be executed in parallel for the same device, so the generic PM domains code need not worry about those cases. Still, it needs to prevent the other possible race conditions between pm_genpd_runtime_suspend(), pm_genpd_runtime_resume(), pm_genpd_poweron() and pm_genpd_poweroff() from happening and it needs to avoid deadlocks at the same time. To this end, modify the generic PM domains code to relax synchronization rules so that: * pm_genpd_poweron() doesn't wait for the PM domain status to change from GPD_STATE_BUSY. If it finds that the status is not GPD_STATE_POWER_OFF, it returns without powering the domain on (it may modify the status depending on the circumstances). * pm_genpd_poweroff() returns as soon as it finds that the PM domain's status changed from GPD_STATE_BUSY after it's released the PM domain's lock. * pm_genpd_runtime_suspend() doesn't wait for the PM domain status to change from GPD_STATE_BUSY after executing the domain's .stop_device() callback and executes pm_genpd_poweroff() only if pm_genpd_runtime_resume() is not executed in parallel. * pm_genpd_runtime_resume() doesn't wait for the PM domain status to change from GPD_STATE_BUSY after executing pm_genpd_poweron() and sets the domain's status to GPD_STATE_BUSY and increments its counter of resuming devices (introduced by this change) immediately after acquiring the lock. The counter of resuming devices is then decremented after executing __pm_genpd_runtime_resume() for the device and the domain's status is reset to GPD_STATE_ACTIVE (unless there are more resuming devices in the domain, in which case the status remains GPD_STATE_BUSY). This way, for example, if a device driver's .runtime_resume() callback executes pm_runtime_resume() for another device in the same PM domain, pm_genpd_poweron() called by pm_genpd_runtime_resume() invoked by the runtime PM framework will not block and it will see that there's nothing to do for it. Next, the PM domain's lock will be acquired without waiting for its status to change from GPD_STATE_BUSY and the device driver's .runtime_resume() callback will be executed. In turn, if pm_runtime_suspend() is executed by one device driver's .runtime_resume() callback for another device in the same PM domain, pm_genpd_poweroff() executed by pm_genpd_runtime_suspend() invoked by the runtime PM framework as a result will notice that one of the devices in the domain is being resumed, so it will return immediately. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-11 16:39:36 -06:00
PM / Domains: Remove intermediate states from the power off sequence Genpd's ->runtime_suspend() (assigned to pm_genpd_runtime_suspend()) doesn't immediately walk the hierarchy of ->runtime_suspend() callbacks. Instead, pm_genpd_runtime_suspend() calls pm_genpd_poweroff() which postpones that until *all* the devices in the genpd are runtime suspended. When pm_genpd_poweroff() discovers that the last device in the genpd is about to be runtime suspended, it calls __pm_genpd_save_device() for *all* the devices in the genpd sequentially. Furthermore, __pm_genpd_save_device() invokes the ->start() callback, walks the hierarchy of the ->runtime_suspend() callbacks and invokes the ->stop() callback. This causes a "thundering herd" problem. Let's address this issue by having pm_genpd_runtime_suspend() immediately walk the hierarchy of the ->runtime_suspend() callbacks, instead of postponing that to the power off sequence via pm_genpd_poweroff(). If the selected ->runtime_suspend() callback doesn't return an error code, call pm_genpd_poweroff() to see if it's feasible to also power off the PM domain. Adopting this change enables us to simplify parts of the code in genpd, for example the locking mechanism. Additionally, it gives some positive side effects, as described below. i) One device's ->runtime_resume() latency is no longer affected by other devices' latencies in a genpd. The complexity genpd has to support the option to abort the power off sequence suffers from latency issues. More precisely, a device that is requested to be runtime resumed, may end up waiting for __pm_genpd_save_device() to complete its operations for *another* device. That's because pm_genpd_poweroff() can't confirm an abort request while it waits for __pm_genpd_save_device() to return. As this patch removes the intermediate states in pm_genpd_poweroff() while powering off the PM domain, we no longer need the ability to abort that sequence. ii) Make pm_runtime[_status]_suspended() reliable when used with genpd. Until the last device in a genpd becomes idle, pm_genpd_runtime_suspend() will return 0 without actually walking the hierarchy of the ->runtime_suspend() callbacks. However, by returning 0 the runtime PM core considers the device as runtime_suspended, so pm_runtime[_status]_suspended() will return true, even though the device isn't (yet) runtime suspended. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, pm_runtime[_status]_suspended() will accurately reflect the status of the device. iii) Enable fine-grained PM through runtime PM callbacks in drivers/subsystems. There are currently cases were drivers/subsystems implements runtime PM callbacks to deploy fine-grained PM (e.g. gate clocks, move pinctrl to power-save state, etc.). While using the genpd, pm_genpd_runtime_suspend() postpones invoking these callbacks until *all* the devices in the genpd are runtime suspended. In essence, one runtime resumed device prevents fine-grained PM for other devices within the same genpd. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, fine-grained PM is enabled throughout all the levels of runtime PM callbacks. iiii) Enable fine-grained PM for IRQ safe devices Per the definition for an IRQ safe device, its runtime PM callbacks must be able to execute in atomic context. In the path while genpd walks the hierarchy of the ->runtime_suspend() callbacks for the device, it uses a mutex. Therefore, genpd prevents that path to be executed for IRQ safe devices. As this patch changes pm_genpd_runtime_suspend() to immediately walk the hierarchy of the ->runtime_suspend() callbacks and without needing to use a mutex, fine-grained PM is enabled throughout all the levels of runtime PM callbacks for IRQ safe devices. Unfortunately this patch also comes with a drawback, as described in the summary below. Driver's/subsystem's runtime PM callbacks may be invoked even when the genpd hasn't actually powered off the PM domain, potentially introducing unnecessary latency. However, in most cases, saving/restoring register contexts for devices are typically fast operations or can be optimized in device specific ways (e.g. shadow copies of register contents in memory, device-specific checks to see if context has been lost before restoring context, etc.). Still, in some cases the driver/subsystem may suffer from latency if runtime PM is used in a very fine-grained manner (e.g. for each IO request or xfer). To prevent that extra overhead, the driver/subsystem may deploy the runtime PM autosuspend feature. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-18 07:17:53 -06:00
if (ret)
return ret;
PM / Domains: Allow callbacks to execute all runtime PM helpers A deadlock may occur if one of the PM domains' .start_device() or .stop_device() callbacks or a device driver's .runtime_suspend() or .runtime_resume() callback executed by the core generic PM domain code uses a "wrong" runtime PM helper function. This happens, for example, if .runtime_resume() from one device's driver calls pm_runtime_resume() for another device in the same PM domain. A similar situation may take place if a device's parent is in the same PM domain, in which case the runtime PM framework may execute pm_genpd_runtime_resume() automatically for the parent (if it is suspended at the moment). This, of course, is undesirable, so the generic PM domains code should be modified to prevent it from happening. The runtime PM framework guarantees that pm_genpd_runtime_suspend() and pm_genpd_runtime_resume() won't be executed in parallel for the same device, so the generic PM domains code need not worry about those cases. Still, it needs to prevent the other possible race conditions between pm_genpd_runtime_suspend(), pm_genpd_runtime_resume(), pm_genpd_poweron() and pm_genpd_poweroff() from happening and it needs to avoid deadlocks at the same time. To this end, modify the generic PM domains code to relax synchronization rules so that: * pm_genpd_poweron() doesn't wait for the PM domain status to change from GPD_STATE_BUSY. If it finds that the status is not GPD_STATE_POWER_OFF, it returns without powering the domain on (it may modify the status depending on the circumstances). * pm_genpd_poweroff() returns as soon as it finds that the PM domain's status changed from GPD_STATE_BUSY after it's released the PM domain's lock. * pm_genpd_runtime_suspend() doesn't wait for the PM domain status to change from GPD_STATE_BUSY after executing the domain's .stop_device() callback and executes pm_genpd_poweroff() only if pm_genpd_runtime_resume() is not executed in parallel. * pm_genpd_runtime_resume() doesn't wait for the PM domain status to change from GPD_STATE_BUSY after executing pm_genpd_poweron() and sets the domain's status to GPD_STATE_BUSY and increments its counter of resuming devices (introduced by this change) immediately after acquiring the lock. The counter of resuming devices is then decremented after executing __pm_genpd_runtime_resume() for the device and the domain's status is reset to GPD_STATE_ACTIVE (unless there are more resuming devices in the domain, in which case the status remains GPD_STATE_BUSY). This way, for example, if a device driver's .runtime_resume() callback executes pm_runtime_resume() for another device in the same PM domain, pm_genpd_poweron() called by pm_genpd_runtime_resume() invoked by the runtime PM framework will not block and it will see that there's nothing to do for it. Next, the PM domain's lock will be acquired without waiting for its status to change from GPD_STATE_BUSY and the device driver's .runtime_resume() callback will be executed. In turn, if pm_runtime_suspend() is executed by one device driver's .runtime_resume() callback for another device in the same PM domain, pm_genpd_poweroff() executed by pm_genpd_runtime_suspend() invoked by the runtime PM framework as a result will notice that one of the devices in the domain is being resumed, so it will return immediately. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-11 16:39:36 -06:00
PM / Domains: Remove intermediate states from the power off sequence Genpd's ->runtime_suspend() (assigned to pm_genpd_runtime_suspend()) doesn't immediately walk the hierarchy of ->runtime_suspend() callbacks. Instead, pm_genpd_runtime_suspend() calls pm_genpd_poweroff() which postpones that until *all* the devices in the genpd are runtime suspended. When pm_genpd_poweroff() discovers that the last device in the genpd is about to be runtime suspended, it calls __pm_genpd_save_device() for *all* the devices in the genpd sequentially. Furthermore, __pm_genpd_save_device() invokes the ->start() callback, walks the hierarchy of the ->runtime_suspend() callbacks and invokes the ->stop() callback. This causes a "thundering herd" problem. Let's address this issue by having pm_genpd_runtime_suspend() immediately walk the hierarchy of the ->runtime_suspend() callbacks, instead of postponing that to the power off sequence via pm_genpd_poweroff(). If the selected ->runtime_suspend() callback doesn't return an error code, call pm_genpd_poweroff() to see if it's feasible to also power off the PM domain. Adopting this change enables us to simplify parts of the code in genpd, for example the locking mechanism. Additionally, it gives some positive side effects, as described below. i) One device's ->runtime_resume() latency is no longer affected by other devices' latencies in a genpd. The complexity genpd has to support the option to abort the power off sequence suffers from latency issues. More precisely, a device that is requested to be runtime resumed, may end up waiting for __pm_genpd_save_device() to complete its operations for *another* device. That's because pm_genpd_poweroff() can't confirm an abort request while it waits for __pm_genpd_save_device() to return. As this patch removes the intermediate states in pm_genpd_poweroff() while powering off the PM domain, we no longer need the ability to abort that sequence. ii) Make pm_runtime[_status]_suspended() reliable when used with genpd. Until the last device in a genpd becomes idle, pm_genpd_runtime_suspend() will return 0 without actually walking the hierarchy of the ->runtime_suspend() callbacks. However, by returning 0 the runtime PM core considers the device as runtime_suspended, so pm_runtime[_status]_suspended() will return true, even though the device isn't (yet) runtime suspended. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, pm_runtime[_status]_suspended() will accurately reflect the status of the device. iii) Enable fine-grained PM through runtime PM callbacks in drivers/subsystems. There are currently cases were drivers/subsystems implements runtime PM callbacks to deploy fine-grained PM (e.g. gate clocks, move pinctrl to power-save state, etc.). While using the genpd, pm_genpd_runtime_suspend() postpones invoking these callbacks until *all* the devices in the genpd are runtime suspended. In essence, one runtime resumed device prevents fine-grained PM for other devices within the same genpd. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, fine-grained PM is enabled throughout all the levels of runtime PM callbacks. iiii) Enable fine-grained PM for IRQ safe devices Per the definition for an IRQ safe device, its runtime PM callbacks must be able to execute in atomic context. In the path while genpd walks the hierarchy of the ->runtime_suspend() callbacks for the device, it uses a mutex. Therefore, genpd prevents that path to be executed for IRQ safe devices. As this patch changes pm_genpd_runtime_suspend() to immediately walk the hierarchy of the ->runtime_suspend() callbacks and without needing to use a mutex, fine-grained PM is enabled throughout all the levels of runtime PM callbacks for IRQ safe devices. Unfortunately this patch also comes with a drawback, as described in the summary below. Driver's/subsystem's runtime PM callbacks may be invoked even when the genpd hasn't actually powered off the PM domain, potentially introducing unnecessary latency. However, in most cases, saving/restoring register contexts for devices are typically fast operations or can be optimized in device specific ways (e.g. shadow copies of register contents in memory, device-specific checks to see if context has been lost before restoring context, etc.). Still, in some cases the driver/subsystem may suffer from latency if runtime PM is used in a very fine-grained manner (e.g. for each IO request or xfer). To prevent that extra overhead, the driver/subsystem may deploy the runtime PM autosuspend feature. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-18 07:17:53 -06:00
out:
/* Measure resume latency. */
if (timed)
time_start = ktime_get();
genpd_start_dev(genpd, dev);
genpd_restore_dev(genpd, dev);
/* Update resume latency value if the measured time exceeds it. */
if (timed) {
elapsed_ns = ktime_to_ns(ktime_sub(ktime_get(), time_start));
if (elapsed_ns > td->resume_latency_ns) {
td->resume_latency_ns = elapsed_ns;
dev_dbg(dev, "resume latency exceeded, %lld ns\n",
elapsed_ns);
genpd->max_off_time_changed = true;
td->constraint_changed = true;
}
}
return 0;
}
static bool pd_ignore_unused;
static int __init pd_ignore_unused_setup(char *__unused)
{
pd_ignore_unused = true;
return 1;
}
__setup("pd_ignore_unused", pd_ignore_unused_setup);
/**
* genpd_poweroff_unused - Power off all PM domains with no devices in use.
*/
static int __init genpd_poweroff_unused(void)
{
struct generic_pm_domain *genpd;
if (pd_ignore_unused) {
pr_warn("genpd: Not disabling unused power domains\n");
return 0;
}
mutex_lock(&gpd_list_lock);
list_for_each_entry(genpd, &gpd_list, gpd_list_node)
genpd_queue_power_off_work(genpd);
mutex_unlock(&gpd_list_lock);
return 0;
}
late_initcall(genpd_poweroff_unused);
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
#ifdef CONFIG_PM_SLEEP
/**
* pm_genpd_present - Check if the given PM domain has been initialized.
* @genpd: PM domain to check.
*/
static bool pm_genpd_present(const struct generic_pm_domain *genpd)
{
const struct generic_pm_domain *gpd;
if (IS_ERR_OR_NULL(genpd))
return false;
list_for_each_entry(gpd, &gpd_list, gpd_list_node)
if (gpd == genpd)
return true;
return false;
}
static bool genpd_dev_active_wakeup(struct generic_pm_domain *genpd,
struct device *dev)
{
return GENPD_DEV_CALLBACK(genpd, bool, active_wakeup, dev);
}
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
/**
PM / Domains: Allow generic PM domains to have multiple masters Currently, for a given generic PM domain there may be only one parent domain (i.e. a PM domain it depends on). However, there is at least one real-life case in which there should be two parents (masters) for one PM domain (the A3RV domain on SH7372 turns out to depend on the A4LC domain and it depends on the A4R domain and the same time). For this reason, allow a PM domain to have multiple parents (masters) by introducing objects representing links between PM domains. The (logical) links between PM domains represent relationships in which one domain is a master (i.e. it is depended on) and another domain is a slave (i.e. it depends on the master) with the rule that the slave cannot be powered on if the master is not powered on and the master cannot be powered off if the slave is not powered off. Each struct generic_pm_domain object representing a PM domain has two lists of links, a list of links in which it is a master and a list of links in which it is a slave. The first of these lists replaces the list of subdomains and the second one is used in place of the parent pointer. Each link is represented by struct gpd_link object containing pointers to the master and the slave and two struct list_head members allowing it to hook into two lists (the master's list of "master" links and the slave's list of "slave" links). This allows the code to get to the link from each side (either from the master or from the slave) and follow it in each direction. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-08-08 15:43:40 -06:00
* pm_genpd_sync_poweroff - Synchronously power off a PM domain and its masters.
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
* @genpd: PM domain to power off, if possible.
* @timed: True if latency measurements are allowed.
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
*
* Check if the given PM domain can be powered off (during system suspend or
PM / Domains: Allow generic PM domains to have multiple masters Currently, for a given generic PM domain there may be only one parent domain (i.e. a PM domain it depends on). However, there is at least one real-life case in which there should be two parents (masters) for one PM domain (the A3RV domain on SH7372 turns out to depend on the A4LC domain and it depends on the A4R domain and the same time). For this reason, allow a PM domain to have multiple parents (masters) by introducing objects representing links between PM domains. The (logical) links between PM domains represent relationships in which one domain is a master (i.e. it is depended on) and another domain is a slave (i.e. it depends on the master) with the rule that the slave cannot be powered on if the master is not powered on and the master cannot be powered off if the slave is not powered off. Each struct generic_pm_domain object representing a PM domain has two lists of links, a list of links in which it is a master and a list of links in which it is a slave. The first of these lists replaces the list of subdomains and the second one is used in place of the parent pointer. Each link is represented by struct gpd_link object containing pointers to the master and the slave and two struct list_head members allowing it to hook into two lists (the master's list of "master" links and the slave's list of "slave" links). This allows the code to get to the link from each side (either from the master or from the slave) and follow it in each direction. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-08-08 15:43:40 -06:00
* hibernation) and do that if so. Also, in that case propagate to its masters.
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
*
* This function is only called in "noirq" and "syscore" stages of system power
* transitions, so it need not acquire locks (all of the "noirq" callbacks are
* executed sequentially, so it is guaranteed that it will never run twice in
* parallel).
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
*/
static void pm_genpd_sync_poweroff(struct generic_pm_domain *genpd,
bool timed)
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
{
PM / Domains: Allow generic PM domains to have multiple masters Currently, for a given generic PM domain there may be only one parent domain (i.e. a PM domain it depends on). However, there is at least one real-life case in which there should be two parents (masters) for one PM domain (the A3RV domain on SH7372 turns out to depend on the A4LC domain and it depends on the A4R domain and the same time). For this reason, allow a PM domain to have multiple parents (masters) by introducing objects representing links between PM domains. The (logical) links between PM domains represent relationships in which one domain is a master (i.e. it is depended on) and another domain is a slave (i.e. it depends on the master) with the rule that the slave cannot be powered on if the master is not powered on and the master cannot be powered off if the slave is not powered off. Each struct generic_pm_domain object representing a PM domain has two lists of links, a list of links in which it is a master and a list of links in which it is a slave. The first of these lists replaces the list of subdomains and the second one is used in place of the parent pointer. Each link is represented by struct gpd_link object containing pointers to the master and the slave and two struct list_head members allowing it to hook into two lists (the master's list of "master" links and the slave's list of "slave" links). This allows the code to get to the link from each side (either from the master or from the slave) and follow it in each direction. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-08-08 15:43:40 -06:00
struct gpd_link *link;
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
if (genpd->status == GPD_STATE_POWER_OFF)
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
return;
if (genpd->suspended_count != genpd->device_count
|| atomic_read(&genpd->sd_count) > 0)
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
return;
genpd_power_off(genpd, timed);
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
genpd->status = GPD_STATE_POWER_OFF;
PM / Domains: Allow generic PM domains to have multiple masters Currently, for a given generic PM domain there may be only one parent domain (i.e. a PM domain it depends on). However, there is at least one real-life case in which there should be two parents (masters) for one PM domain (the A3RV domain on SH7372 turns out to depend on the A4LC domain and it depends on the A4R domain and the same time). For this reason, allow a PM domain to have multiple parents (masters) by introducing objects representing links between PM domains. The (logical) links between PM domains represent relationships in which one domain is a master (i.e. it is depended on) and another domain is a slave (i.e. it depends on the master) with the rule that the slave cannot be powered on if the master is not powered on and the master cannot be powered off if the slave is not powered off. Each struct generic_pm_domain object representing a PM domain has two lists of links, a list of links in which it is a master and a list of links in which it is a slave. The first of these lists replaces the list of subdomains and the second one is used in place of the parent pointer. Each link is represented by struct gpd_link object containing pointers to the master and the slave and two struct list_head members allowing it to hook into two lists (the master's list of "master" links and the slave's list of "slave" links). This allows the code to get to the link from each side (either from the master or from the slave) and follow it in each direction. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-08-08 15:43:40 -06:00
list_for_each_entry(link, &genpd->slave_links, slave_node) {
genpd_sd_counter_dec(link->master);
pm_genpd_sync_poweroff(link->master, timed);
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
}
}
/**
* pm_genpd_sync_poweron - Synchronously power on a PM domain and its masters.
* @genpd: PM domain to power on.
* @timed: True if latency measurements are allowed.
*
* This function is only called in "noirq" and "syscore" stages of system power
* transitions, so it need not acquire locks (all of the "noirq" callbacks are
* executed sequentially, so it is guaranteed that it will never run twice in
* parallel).
*/
static void pm_genpd_sync_poweron(struct generic_pm_domain *genpd,
bool timed)
{
struct gpd_link *link;
PM / Domains: Remove intermediate states from the power off sequence Genpd's ->runtime_suspend() (assigned to pm_genpd_runtime_suspend()) doesn't immediately walk the hierarchy of ->runtime_suspend() callbacks. Instead, pm_genpd_runtime_suspend() calls pm_genpd_poweroff() which postpones that until *all* the devices in the genpd are runtime suspended. When pm_genpd_poweroff() discovers that the last device in the genpd is about to be runtime suspended, it calls __pm_genpd_save_device() for *all* the devices in the genpd sequentially. Furthermore, __pm_genpd_save_device() invokes the ->start() callback, walks the hierarchy of the ->runtime_suspend() callbacks and invokes the ->stop() callback. This causes a "thundering herd" problem. Let's address this issue by having pm_genpd_runtime_suspend() immediately walk the hierarchy of the ->runtime_suspend() callbacks, instead of postponing that to the power off sequence via pm_genpd_poweroff(). If the selected ->runtime_suspend() callback doesn't return an error code, call pm_genpd_poweroff() to see if it's feasible to also power off the PM domain. Adopting this change enables us to simplify parts of the code in genpd, for example the locking mechanism. Additionally, it gives some positive side effects, as described below. i) One device's ->runtime_resume() latency is no longer affected by other devices' latencies in a genpd. The complexity genpd has to support the option to abort the power off sequence suffers from latency issues. More precisely, a device that is requested to be runtime resumed, may end up waiting for __pm_genpd_save_device() to complete its operations for *another* device. That's because pm_genpd_poweroff() can't confirm an abort request while it waits for __pm_genpd_save_device() to return. As this patch removes the intermediate states in pm_genpd_poweroff() while powering off the PM domain, we no longer need the ability to abort that sequence. ii) Make pm_runtime[_status]_suspended() reliable when used with genpd. Until the last device in a genpd becomes idle, pm_genpd_runtime_suspend() will return 0 without actually walking the hierarchy of the ->runtime_suspend() callbacks. However, by returning 0 the runtime PM core considers the device as runtime_suspended, so pm_runtime[_status]_suspended() will return true, even though the device isn't (yet) runtime suspended. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, pm_runtime[_status]_suspended() will accurately reflect the status of the device. iii) Enable fine-grained PM through runtime PM callbacks in drivers/subsystems. There are currently cases were drivers/subsystems implements runtime PM callbacks to deploy fine-grained PM (e.g. gate clocks, move pinctrl to power-save state, etc.). While using the genpd, pm_genpd_runtime_suspend() postpones invoking these callbacks until *all* the devices in the genpd are runtime suspended. In essence, one runtime resumed device prevents fine-grained PM for other devices within the same genpd. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, fine-grained PM is enabled throughout all the levels of runtime PM callbacks. iiii) Enable fine-grained PM for IRQ safe devices Per the definition for an IRQ safe device, its runtime PM callbacks must be able to execute in atomic context. In the path while genpd walks the hierarchy of the ->runtime_suspend() callbacks for the device, it uses a mutex. Therefore, genpd prevents that path to be executed for IRQ safe devices. As this patch changes pm_genpd_runtime_suspend() to immediately walk the hierarchy of the ->runtime_suspend() callbacks and without needing to use a mutex, fine-grained PM is enabled throughout all the levels of runtime PM callbacks for IRQ safe devices. Unfortunately this patch also comes with a drawback, as described in the summary below. Driver's/subsystem's runtime PM callbacks may be invoked even when the genpd hasn't actually powered off the PM domain, potentially introducing unnecessary latency. However, in most cases, saving/restoring register contexts for devices are typically fast operations or can be optimized in device specific ways (e.g. shadow copies of register contents in memory, device-specific checks to see if context has been lost before restoring context, etc.). Still, in some cases the driver/subsystem may suffer from latency if runtime PM is used in a very fine-grained manner (e.g. for each IO request or xfer). To prevent that extra overhead, the driver/subsystem may deploy the runtime PM autosuspend feature. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-18 07:17:53 -06:00
if (genpd->status == GPD_STATE_ACTIVE)
return;
list_for_each_entry(link, &genpd->slave_links, slave_node) {
pm_genpd_sync_poweron(link->master, timed);
genpd_sd_counter_inc(link->master);
}
genpd_power_on(genpd, timed);
genpd->status = GPD_STATE_ACTIVE;
}
/**
* resume_needed - Check whether to resume a device before system suspend.
* @dev: Device to check.
* @genpd: PM domain the device belongs to.
*
* There are two cases in which a device that can wake up the system from sleep
* states should be resumed by pm_genpd_prepare(): (1) if the device is enabled
* to wake up the system and it has to remain active for this purpose while the
* system is in the sleep state and (2) if the device is not enabled to wake up
* the system from sleep states and it generally doesn't generate wakeup signals
* by itself (those signals are generated on its behalf by other parts of the
* system). In the latter case it may be necessary to reconfigure the device's
* wakeup settings during system suspend, because it may have been set up to
* signal remote wakeup from the system's working state as needed by runtime PM.
* Return 'true' in either of the above cases.
*/
static bool resume_needed(struct device *dev, struct generic_pm_domain *genpd)
{
bool active_wakeup;
if (!device_can_wakeup(dev))
return false;
active_wakeup = genpd_dev_active_wakeup(genpd, dev);
return device_may_wakeup(dev) ? active_wakeup : !active_wakeup;
}
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
/**
* pm_genpd_prepare - Start power transition of a device in a PM domain.
* @dev: Device to start the transition of.
*
* Start a power transition of a device (during a system-wide power transition)
* under the assumption that its pm_domain field points to the domain member of
* an object of type struct generic_pm_domain representing a PM domain
* consisting of I/O devices.
*/
static int pm_genpd_prepare(struct device *dev)
{
struct generic_pm_domain *genpd;
int ret;
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
dev_dbg(dev, "%s()\n", __func__);
genpd = dev_to_genpd(dev);
if (IS_ERR(genpd))
return -EINVAL;
/*
* If a wakeup request is pending for the device, it should be woken up
* at this point and a system wakeup event should be reported if it's
* set up to wake up the system from sleep states.
*/
pm_runtime_get_noresume(dev);
if (pm_runtime_barrier(dev) && device_may_wakeup(dev))
pm_wakeup_event(dev, 0);
if (pm_wakeup_pending()) {
pm_runtime_put(dev);
return -EBUSY;
}
if (resume_needed(dev, genpd))
pm_runtime_resume(dev);
PM / Domains: Remove intermediate states from the power off sequence Genpd's ->runtime_suspend() (assigned to pm_genpd_runtime_suspend()) doesn't immediately walk the hierarchy of ->runtime_suspend() callbacks. Instead, pm_genpd_runtime_suspend() calls pm_genpd_poweroff() which postpones that until *all* the devices in the genpd are runtime suspended. When pm_genpd_poweroff() discovers that the last device in the genpd is about to be runtime suspended, it calls __pm_genpd_save_device() for *all* the devices in the genpd sequentially. Furthermore, __pm_genpd_save_device() invokes the ->start() callback, walks the hierarchy of the ->runtime_suspend() callbacks and invokes the ->stop() callback. This causes a "thundering herd" problem. Let's address this issue by having pm_genpd_runtime_suspend() immediately walk the hierarchy of the ->runtime_suspend() callbacks, instead of postponing that to the power off sequence via pm_genpd_poweroff(). If the selected ->runtime_suspend() callback doesn't return an error code, call pm_genpd_poweroff() to see if it's feasible to also power off the PM domain. Adopting this change enables us to simplify parts of the code in genpd, for example the locking mechanism. Additionally, it gives some positive side effects, as described below. i) One device's ->runtime_resume() latency is no longer affected by other devices' latencies in a genpd. The complexity genpd has to support the option to abort the power off sequence suffers from latency issues. More precisely, a device that is requested to be runtime resumed, may end up waiting for __pm_genpd_save_device() to complete its operations for *another* device. That's because pm_genpd_poweroff() can't confirm an abort request while it waits for __pm_genpd_save_device() to return. As this patch removes the intermediate states in pm_genpd_poweroff() while powering off the PM domain, we no longer need the ability to abort that sequence. ii) Make pm_runtime[_status]_suspended() reliable when used with genpd. Until the last device in a genpd becomes idle, pm_genpd_runtime_suspend() will return 0 without actually walking the hierarchy of the ->runtime_suspend() callbacks. However, by returning 0 the runtime PM core considers the device as runtime_suspended, so pm_runtime[_status]_suspended() will return true, even though the device isn't (yet) runtime suspended. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, pm_runtime[_status]_suspended() will accurately reflect the status of the device. iii) Enable fine-grained PM through runtime PM callbacks in drivers/subsystems. There are currently cases were drivers/subsystems implements runtime PM callbacks to deploy fine-grained PM (e.g. gate clocks, move pinctrl to power-save state, etc.). While using the genpd, pm_genpd_runtime_suspend() postpones invoking these callbacks until *all* the devices in the genpd are runtime suspended. In essence, one runtime resumed device prevents fine-grained PM for other devices within the same genpd. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, fine-grained PM is enabled throughout all the levels of runtime PM callbacks. iiii) Enable fine-grained PM for IRQ safe devices Per the definition for an IRQ safe device, its runtime PM callbacks must be able to execute in atomic context. In the path while genpd walks the hierarchy of the ->runtime_suspend() callbacks for the device, it uses a mutex. Therefore, genpd prevents that path to be executed for IRQ safe devices. As this patch changes pm_genpd_runtime_suspend() to immediately walk the hierarchy of the ->runtime_suspend() callbacks and without needing to use a mutex, fine-grained PM is enabled throughout all the levels of runtime PM callbacks for IRQ safe devices. Unfortunately this patch also comes with a drawback, as described in the summary below. Driver's/subsystem's runtime PM callbacks may be invoked even when the genpd hasn't actually powered off the PM domain, potentially introducing unnecessary latency. However, in most cases, saving/restoring register contexts for devices are typically fast operations or can be optimized in device specific ways (e.g. shadow copies of register contents in memory, device-specific checks to see if context has been lost before restoring context, etc.). Still, in some cases the driver/subsystem may suffer from latency if runtime PM is used in a very fine-grained manner (e.g. for each IO request or xfer). To prevent that extra overhead, the driver/subsystem may deploy the runtime PM autosuspend feature. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-18 07:17:53 -06:00
mutex_lock(&genpd->lock);
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
if (genpd->prepared_count++ == 0) {
genpd->suspended_count = 0;
genpd->suspend_power_off = genpd->status == GPD_STATE_POWER_OFF;
}
PM / Domains: Remove intermediate states from the power off sequence Genpd's ->runtime_suspend() (assigned to pm_genpd_runtime_suspend()) doesn't immediately walk the hierarchy of ->runtime_suspend() callbacks. Instead, pm_genpd_runtime_suspend() calls pm_genpd_poweroff() which postpones that until *all* the devices in the genpd are runtime suspended. When pm_genpd_poweroff() discovers that the last device in the genpd is about to be runtime suspended, it calls __pm_genpd_save_device() for *all* the devices in the genpd sequentially. Furthermore, __pm_genpd_save_device() invokes the ->start() callback, walks the hierarchy of the ->runtime_suspend() callbacks and invokes the ->stop() callback. This causes a "thundering herd" problem. Let's address this issue by having pm_genpd_runtime_suspend() immediately walk the hierarchy of the ->runtime_suspend() callbacks, instead of postponing that to the power off sequence via pm_genpd_poweroff(). If the selected ->runtime_suspend() callback doesn't return an error code, call pm_genpd_poweroff() to see if it's feasible to also power off the PM domain. Adopting this change enables us to simplify parts of the code in genpd, for example the locking mechanism. Additionally, it gives some positive side effects, as described below. i) One device's ->runtime_resume() latency is no longer affected by other devices' latencies in a genpd. The complexity genpd has to support the option to abort the power off sequence suffers from latency issues. More precisely, a device that is requested to be runtime resumed, may end up waiting for __pm_genpd_save_device() to complete its operations for *another* device. That's because pm_genpd_poweroff() can't confirm an abort request while it waits for __pm_genpd_save_device() to return. As this patch removes the intermediate states in pm_genpd_poweroff() while powering off the PM domain, we no longer need the ability to abort that sequence. ii) Make pm_runtime[_status]_suspended() reliable when used with genpd. Until the last device in a genpd becomes idle, pm_genpd_runtime_suspend() will return 0 without actually walking the hierarchy of the ->runtime_suspend() callbacks. However, by returning 0 the runtime PM core considers the device as runtime_suspended, so pm_runtime[_status]_suspended() will return true, even though the device isn't (yet) runtime suspended. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, pm_runtime[_status]_suspended() will accurately reflect the status of the device. iii) Enable fine-grained PM through runtime PM callbacks in drivers/subsystems. There are currently cases were drivers/subsystems implements runtime PM callbacks to deploy fine-grained PM (e.g. gate clocks, move pinctrl to power-save state, etc.). While using the genpd, pm_genpd_runtime_suspend() postpones invoking these callbacks until *all* the devices in the genpd are runtime suspended. In essence, one runtime resumed device prevents fine-grained PM for other devices within the same genpd. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, fine-grained PM is enabled throughout all the levels of runtime PM callbacks. iiii) Enable fine-grained PM for IRQ safe devices Per the definition for an IRQ safe device, its runtime PM callbacks must be able to execute in atomic context. In the path while genpd walks the hierarchy of the ->runtime_suspend() callbacks for the device, it uses a mutex. Therefore, genpd prevents that path to be executed for IRQ safe devices. As this patch changes pm_genpd_runtime_suspend() to immediately walk the hierarchy of the ->runtime_suspend() callbacks and without needing to use a mutex, fine-grained PM is enabled throughout all the levels of runtime PM callbacks for IRQ safe devices. Unfortunately this patch also comes with a drawback, as described in the summary below. Driver's/subsystem's runtime PM callbacks may be invoked even when the genpd hasn't actually powered off the PM domain, potentially introducing unnecessary latency. However, in most cases, saving/restoring register contexts for devices are typically fast operations or can be optimized in device specific ways (e.g. shadow copies of register contents in memory, device-specific checks to see if context has been lost before restoring context, etc.). Still, in some cases the driver/subsystem may suffer from latency if runtime PM is used in a very fine-grained manner (e.g. for each IO request or xfer). To prevent that extra overhead, the driver/subsystem may deploy the runtime PM autosuspend feature. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-18 07:17:53 -06:00
mutex_unlock(&genpd->lock);
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
if (genpd->suspend_power_off) {
pm_runtime_put_noidle(dev);
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
return 0;
}
/*
* The PM domain must be in the GPD_STATE_ACTIVE state at this point,
* so genpd_poweron() will return immediately, but if the device
* is suspended (e.g. it's been stopped by genpd_stop_dev()), we need
* to make it operational.
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
*/
pm_runtime_resume(dev);
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
__pm_runtime_disable(dev, false);
ret = pm_generic_prepare(dev);
if (ret) {
mutex_lock(&genpd->lock);
if (--genpd->prepared_count == 0)
genpd->suspend_power_off = false;
mutex_unlock(&genpd->lock);
pm_runtime_enable(dev);
}
pm_runtime_put(dev);
return ret;
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
}
/**
* pm_genpd_suspend - Suspend a device belonging to an I/O PM domain.
* @dev: Device to suspend.
*
* Suspend a device under the assumption that its pm_domain field points to the
* domain member of an object of type struct generic_pm_domain representing
* a PM domain consisting of I/O devices.
*/
static int pm_genpd_suspend(struct device *dev)
{
struct generic_pm_domain *genpd;
dev_dbg(dev, "%s()\n", __func__);
genpd = dev_to_genpd(dev);
if (IS_ERR(genpd))
return -EINVAL;
return genpd->suspend_power_off ? 0 : pm_generic_suspend(dev);
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
}
/**
* pm_genpd_suspend_late - Late suspend of a device from an I/O PM domain.
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
* @dev: Device to suspend.
*
* Carry out a late suspend of a device under the assumption that its
* pm_domain field points to the domain member of an object of type
* struct generic_pm_domain representing a PM domain consisting of I/O devices.
*/
static int pm_genpd_suspend_late(struct device *dev)
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
{
struct generic_pm_domain *genpd;
dev_dbg(dev, "%s()\n", __func__);
genpd = dev_to_genpd(dev);
if (IS_ERR(genpd))
return -EINVAL;
return genpd->suspend_power_off ? 0 : pm_generic_suspend_late(dev);
}
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
/**
* pm_genpd_suspend_noirq - Completion of suspend of device in an I/O PM domain.
* @dev: Device to suspend.
*
* Stop the device and remove power from the domain if all devices in it have
* been stopped.
*/
static int pm_genpd_suspend_noirq(struct device *dev)
{
struct generic_pm_domain *genpd;
dev_dbg(dev, "%s()\n", __func__);
genpd = dev_to_genpd(dev);
if (IS_ERR(genpd))
return -EINVAL;
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
if (genpd->suspend_power_off
|| (dev->power.wakeup_path && genpd_dev_active_wakeup(genpd, dev)))
return 0;
genpd_stop_dev(genpd, dev);
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
/*
* Since all of the "noirq" callbacks are executed sequentially, it is
* guaranteed that this function will never run twice in parallel for
* the same PM domain, so it is not necessary to use locking here.
*/
genpd->suspended_count++;
pm_genpd_sync_poweroff(genpd, true);
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
return 0;
}
/**
* pm_genpd_resume_noirq - Start of resume of device in an I/O PM domain.
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
* @dev: Device to resume.
*
* Restore power to the device's PM domain, if necessary, and start the device.
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
*/
static int pm_genpd_resume_noirq(struct device *dev)
{
struct generic_pm_domain *genpd;
dev_dbg(dev, "%s()\n", __func__);
genpd = dev_to_genpd(dev);
if (IS_ERR(genpd))
return -EINVAL;
if (genpd->suspend_power_off
|| (dev->power.wakeup_path && genpd_dev_active_wakeup(genpd, dev)))
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
return 0;
/*
* Since all of the "noirq" callbacks are executed sequentially, it is
* guaranteed that this function will never run twice in parallel for
* the same PM domain, so it is not necessary to use locking here.
*/
pm_genpd_sync_poweron(genpd, true);
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
genpd->suspended_count--;
return genpd_start_dev(genpd, dev);
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
}
/**
* pm_genpd_resume_early - Early resume of a device in an I/O PM domain.
* @dev: Device to resume.
*
* Carry out an early resume of a device under the assumption that its
* pm_domain field points to the domain member of an object of type
* struct generic_pm_domain representing a power domain consisting of I/O
* devices.
*/
static int pm_genpd_resume_early(struct device *dev)
{
struct generic_pm_domain *genpd;
dev_dbg(dev, "%s()\n", __func__);
genpd = dev_to_genpd(dev);
if (IS_ERR(genpd))
return -EINVAL;
return genpd->suspend_power_off ? 0 : pm_generic_resume_early(dev);
}
/**
* pm_genpd_resume - Resume of device in an I/O PM domain.
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
* @dev: Device to resume.
*
* Resume a device under the assumption that its pm_domain field points to the
* domain member of an object of type struct generic_pm_domain representing
* a power domain consisting of I/O devices.
*/
static int pm_genpd_resume(struct device *dev)
{
struct generic_pm_domain *genpd;
dev_dbg(dev, "%s()\n", __func__);
genpd = dev_to_genpd(dev);
if (IS_ERR(genpd))
return -EINVAL;
return genpd->suspend_power_off ? 0 : pm_generic_resume(dev);
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
}
/**
* pm_genpd_freeze - Freezing a device in an I/O PM domain.
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
* @dev: Device to freeze.
*
* Freeze a device under the assumption that its pm_domain field points to the
* domain member of an object of type struct generic_pm_domain representing
* a power domain consisting of I/O devices.
*/
static int pm_genpd_freeze(struct device *dev)
{
struct generic_pm_domain *genpd;
dev_dbg(dev, "%s()\n", __func__);
genpd = dev_to_genpd(dev);
if (IS_ERR(genpd))
return -EINVAL;
return genpd->suspend_power_off ? 0 : pm_generic_freeze(dev);
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
}
/**
* pm_genpd_freeze_late - Late freeze of a device in an I/O PM domain.
* @dev: Device to freeze.
*
* Carry out a late freeze of a device under the assumption that its
* pm_domain field points to the domain member of an object of type
* struct generic_pm_domain representing a power domain consisting of I/O
* devices.
*/
static int pm_genpd_freeze_late(struct device *dev)
{
struct generic_pm_domain *genpd;
dev_dbg(dev, "%s()\n", __func__);
genpd = dev_to_genpd(dev);
if (IS_ERR(genpd))
return -EINVAL;
return genpd->suspend_power_off ? 0 : pm_generic_freeze_late(dev);
}
/**
* pm_genpd_freeze_noirq - Completion of freezing a device in an I/O PM domain.
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
* @dev: Device to freeze.
*
* Carry out a late freeze of a device under the assumption that its
* pm_domain field points to the domain member of an object of type
* struct generic_pm_domain representing a power domain consisting of I/O
* devices.
*/
static int pm_genpd_freeze_noirq(struct device *dev)
{
struct generic_pm_domain *genpd;
dev_dbg(dev, "%s()\n", __func__);
genpd = dev_to_genpd(dev);
if (IS_ERR(genpd))
return -EINVAL;
return genpd->suspend_power_off ? 0 : genpd_stop_dev(genpd, dev);
}
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
/**
* pm_genpd_thaw_noirq - Early thaw of device in an I/O PM domain.
* @dev: Device to thaw.
*
* Start the device, unless power has been removed from the domain already
* before the system transition.
*/
static int pm_genpd_thaw_noirq(struct device *dev)
{
struct generic_pm_domain *genpd;
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
dev_dbg(dev, "%s()\n", __func__);
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
genpd = dev_to_genpd(dev);
if (IS_ERR(genpd))
return -EINVAL;
return genpd->suspend_power_off ?
0 : genpd_start_dev(genpd, dev);
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
}
/**
* pm_genpd_thaw_early - Early thaw of device in an I/O PM domain.
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
* @dev: Device to thaw.
*
* Carry out an early thaw of a device under the assumption that its
* pm_domain field points to the domain member of an object of type
* struct generic_pm_domain representing a power domain consisting of I/O
* devices.
*/
static int pm_genpd_thaw_early(struct device *dev)
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
{
struct generic_pm_domain *genpd;
dev_dbg(dev, "%s()\n", __func__);
genpd = dev_to_genpd(dev);
if (IS_ERR(genpd))
return -EINVAL;
return genpd->suspend_power_off ? 0 : pm_generic_thaw_early(dev);
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
}
/**
* pm_genpd_thaw - Thaw a device belonging to an I/O power domain.
* @dev: Device to thaw.
*
* Thaw a device under the assumption that its pm_domain field points to the
* domain member of an object of type struct generic_pm_domain representing
* a power domain consisting of I/O devices.
*/
static int pm_genpd_thaw(struct device *dev)
{
struct generic_pm_domain *genpd;
dev_dbg(dev, "%s()\n", __func__);
genpd = dev_to_genpd(dev);
if (IS_ERR(genpd))
return -EINVAL;
return genpd->suspend_power_off ? 0 : pm_generic_thaw(dev);
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
}
/**
* pm_genpd_restore_noirq - Start of restore of device in an I/O PM domain.
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
* @dev: Device to resume.
*
* Make sure the domain will be in the same power state as before the
* hibernation the system is resuming from and start the device if necessary.
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
*/
static int pm_genpd_restore_noirq(struct device *dev)
{
struct generic_pm_domain *genpd;
dev_dbg(dev, "%s()\n", __func__);
genpd = dev_to_genpd(dev);
if (IS_ERR(genpd))
return -EINVAL;
/*
* Since all of the "noirq" callbacks are executed sequentially, it is
* guaranteed that this function will never run twice in parallel for
* the same PM domain, so it is not necessary to use locking here.
*
* At this point suspended_count == 0 means we are being run for the
* first time for the given domain in the present cycle.
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
*/
if (genpd->suspended_count++ == 0) {
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
/*
* The boot kernel might put the domain into arbitrary state,
* so make it appear as powered off to pm_genpd_sync_poweron(),
* so that it tries to power it on in case it was really off.
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
*/
genpd->status = GPD_STATE_POWER_OFF;
if (genpd->suspend_power_off) {
/*
* If the domain was off before the hibernation, make
* sure it will be off going forward.
*/
genpd_power_off(genpd, true);
return 0;
}
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
}
if (genpd->suspend_power_off)
return 0;
pm_genpd_sync_poweron(genpd, true);
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
return genpd_start_dev(genpd, dev);
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
}
/**
* pm_genpd_complete - Complete power transition of a device in a power domain.
* @dev: Device to complete the transition of.
*
* Complete a power transition of a device (during a system-wide power
* transition) under the assumption that its pm_domain field points to the
* domain member of an object of type struct generic_pm_domain representing
* a power domain consisting of I/O devices.
*/
static void pm_genpd_complete(struct device *dev)
{
struct generic_pm_domain *genpd;
bool run_complete;
dev_dbg(dev, "%s()\n", __func__);
genpd = dev_to_genpd(dev);
if (IS_ERR(genpd))
return;
mutex_lock(&genpd->lock);
run_complete = !genpd->suspend_power_off;
if (--genpd->prepared_count == 0)
genpd->suspend_power_off = false;
mutex_unlock(&genpd->lock);
if (run_complete) {
pm_generic_complete(dev);
pm_runtime_set_active(dev);
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
pm_runtime_enable(dev);
pm_request_idle(dev);
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
}
}
/**
* genpd_syscore_switch - Switch power during system core suspend or resume.
* @dev: Device that normally is marked as "always on" to switch power for.
*
* This routine may only be called during the system core (syscore) suspend or
* resume phase for devices whose "always on" flags are set.
*/
static void genpd_syscore_switch(struct device *dev, bool suspend)
{
struct generic_pm_domain *genpd;
genpd = dev_to_genpd(dev);
if (!pm_genpd_present(genpd))
return;
if (suspend) {
genpd->suspended_count++;
pm_genpd_sync_poweroff(genpd, false);
} else {
pm_genpd_sync_poweron(genpd, false);
genpd->suspended_count--;
}
}
void pm_genpd_syscore_poweroff(struct device *dev)
{
genpd_syscore_switch(dev, true);
}
EXPORT_SYMBOL_GPL(pm_genpd_syscore_poweroff);
void pm_genpd_syscore_poweron(struct device *dev)
{
genpd_syscore_switch(dev, false);
}
EXPORT_SYMBOL_GPL(pm_genpd_syscore_poweron);
#else /* !CONFIG_PM_SLEEP */
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
#define pm_genpd_prepare NULL
#define pm_genpd_suspend NULL
#define pm_genpd_suspend_late NULL
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
#define pm_genpd_suspend_noirq NULL
#define pm_genpd_resume_early NULL
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
#define pm_genpd_resume_noirq NULL
#define pm_genpd_resume NULL
#define pm_genpd_freeze NULL
#define pm_genpd_freeze_late NULL
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
#define pm_genpd_freeze_noirq NULL
#define pm_genpd_thaw_early NULL
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
#define pm_genpd_thaw_noirq NULL
#define pm_genpd_thaw NULL
#define pm_genpd_restore_noirq NULL
#define pm_genpd_complete NULL
#endif /* CONFIG_PM_SLEEP */
static struct generic_pm_domain_data *genpd_alloc_dev_data(struct device *dev,
struct generic_pm_domain *genpd,
struct gpd_timing_data *td)
{
struct generic_pm_domain_data *gpd_data;
int ret;
ret = dev_pm_get_subsys_data(dev);
if (ret)
return ERR_PTR(ret);
gpd_data = kzalloc(sizeof(*gpd_data), GFP_KERNEL);
if (!gpd_data) {
ret = -ENOMEM;
goto err_put;
}
if (td)
gpd_data->td = *td;
gpd_data->base.dev = dev;
gpd_data->td.constraint_changed = true;
gpd_data->td.effective_constraint_ns = -1;
gpd_data->nb.notifier_call = genpd_dev_pm_qos_notifier;
spin_lock_irq(&dev->power.lock);
if (dev->power.subsys_data->domain_data) {
ret = -EINVAL;
goto err_free;
}
dev->power.subsys_data->domain_data = &gpd_data->base;
dev->pm_domain = &genpd->domain;
spin_unlock_irq(&dev->power.lock);
return gpd_data;
err_free:
spin_unlock_irq(&dev->power.lock);
kfree(gpd_data);
err_put:
dev_pm_put_subsys_data(dev);
return ERR_PTR(ret);
}
static void genpd_free_dev_data(struct device *dev,
struct generic_pm_domain_data *gpd_data)
{
spin_lock_irq(&dev->power.lock);
dev->pm_domain = NULL;
dev->power.subsys_data->domain_data = NULL;
spin_unlock_irq(&dev->power.lock);
kfree(gpd_data);
dev_pm_put_subsys_data(dev);
}
/**
* __pm_genpd_add_device - Add a device to an I/O PM domain.
* @genpd: PM domain to add the device to.
* @dev: Device to be added.
* @td: Set of PM QoS timing parameters to attach to the device.
*/
int __pm_genpd_add_device(struct generic_pm_domain *genpd, struct device *dev,
struct gpd_timing_data *td)
{
struct generic_pm_domain_data *gpd_data;
int ret = 0;
dev_dbg(dev, "%s()\n", __func__);
if (IS_ERR_OR_NULL(genpd) || IS_ERR_OR_NULL(dev))
return -EINVAL;
gpd_data = genpd_alloc_dev_data(dev, genpd, td);
if (IS_ERR(gpd_data))
return PTR_ERR(gpd_data);
PM / Domains: Remove intermediate states from the power off sequence Genpd's ->runtime_suspend() (assigned to pm_genpd_runtime_suspend()) doesn't immediately walk the hierarchy of ->runtime_suspend() callbacks. Instead, pm_genpd_runtime_suspend() calls pm_genpd_poweroff() which postpones that until *all* the devices in the genpd are runtime suspended. When pm_genpd_poweroff() discovers that the last device in the genpd is about to be runtime suspended, it calls __pm_genpd_save_device() for *all* the devices in the genpd sequentially. Furthermore, __pm_genpd_save_device() invokes the ->start() callback, walks the hierarchy of the ->runtime_suspend() callbacks and invokes the ->stop() callback. This causes a "thundering herd" problem. Let's address this issue by having pm_genpd_runtime_suspend() immediately walk the hierarchy of the ->runtime_suspend() callbacks, instead of postponing that to the power off sequence via pm_genpd_poweroff(). If the selected ->runtime_suspend() callback doesn't return an error code, call pm_genpd_poweroff() to see if it's feasible to also power off the PM domain. Adopting this change enables us to simplify parts of the code in genpd, for example the locking mechanism. Additionally, it gives some positive side effects, as described below. i) One device's ->runtime_resume() latency is no longer affected by other devices' latencies in a genpd. The complexity genpd has to support the option to abort the power off sequence suffers from latency issues. More precisely, a device that is requested to be runtime resumed, may end up waiting for __pm_genpd_save_device() to complete its operations for *another* device. That's because pm_genpd_poweroff() can't confirm an abort request while it waits for __pm_genpd_save_device() to return. As this patch removes the intermediate states in pm_genpd_poweroff() while powering off the PM domain, we no longer need the ability to abort that sequence. ii) Make pm_runtime[_status]_suspended() reliable when used with genpd. Until the last device in a genpd becomes idle, pm_genpd_runtime_suspend() will return 0 without actually walking the hierarchy of the ->runtime_suspend() callbacks. However, by returning 0 the runtime PM core considers the device as runtime_suspended, so pm_runtime[_status]_suspended() will return true, even though the device isn't (yet) runtime suspended. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, pm_runtime[_status]_suspended() will accurately reflect the status of the device. iii) Enable fine-grained PM through runtime PM callbacks in drivers/subsystems. There are currently cases were drivers/subsystems implements runtime PM callbacks to deploy fine-grained PM (e.g. gate clocks, move pinctrl to power-save state, etc.). While using the genpd, pm_genpd_runtime_suspend() postpones invoking these callbacks until *all* the devices in the genpd are runtime suspended. In essence, one runtime resumed device prevents fine-grained PM for other devices within the same genpd. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, fine-grained PM is enabled throughout all the levels of runtime PM callbacks. iiii) Enable fine-grained PM for IRQ safe devices Per the definition for an IRQ safe device, its runtime PM callbacks must be able to execute in atomic context. In the path while genpd walks the hierarchy of the ->runtime_suspend() callbacks for the device, it uses a mutex. Therefore, genpd prevents that path to be executed for IRQ safe devices. As this patch changes pm_genpd_runtime_suspend() to immediately walk the hierarchy of the ->runtime_suspend() callbacks and without needing to use a mutex, fine-grained PM is enabled throughout all the levels of runtime PM callbacks for IRQ safe devices. Unfortunately this patch also comes with a drawback, as described in the summary below. Driver's/subsystem's runtime PM callbacks may be invoked even when the genpd hasn't actually powered off the PM domain, potentially introducing unnecessary latency. However, in most cases, saving/restoring register contexts for devices are typically fast operations or can be optimized in device specific ways (e.g. shadow copies of register contents in memory, device-specific checks to see if context has been lost before restoring context, etc.). Still, in some cases the driver/subsystem may suffer from latency if runtime PM is used in a very fine-grained manner (e.g. for each IO request or xfer). To prevent that extra overhead, the driver/subsystem may deploy the runtime PM autosuspend feature. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-18 07:17:53 -06:00
mutex_lock(&genpd->lock);
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
if (genpd->prepared_count > 0) {
ret = -EAGAIN;
goto out;
}
ret = genpd->attach_dev ? genpd->attach_dev(genpd, dev) : 0;
if (ret)
goto out;
genpd->device_count++;
genpd->max_off_time_changed = true;
list_add_tail(&gpd_data->base.list_node, &genpd->dev_list);
out:
PM / Domains: Remove intermediate states from the power off sequence Genpd's ->runtime_suspend() (assigned to pm_genpd_runtime_suspend()) doesn't immediately walk the hierarchy of ->runtime_suspend() callbacks. Instead, pm_genpd_runtime_suspend() calls pm_genpd_poweroff() which postpones that until *all* the devices in the genpd are runtime suspended. When pm_genpd_poweroff() discovers that the last device in the genpd is about to be runtime suspended, it calls __pm_genpd_save_device() for *all* the devices in the genpd sequentially. Furthermore, __pm_genpd_save_device() invokes the ->start() callback, walks the hierarchy of the ->runtime_suspend() callbacks and invokes the ->stop() callback. This causes a "thundering herd" problem. Let's address this issue by having pm_genpd_runtime_suspend() immediately walk the hierarchy of the ->runtime_suspend() callbacks, instead of postponing that to the power off sequence via pm_genpd_poweroff(). If the selected ->runtime_suspend() callback doesn't return an error code, call pm_genpd_poweroff() to see if it's feasible to also power off the PM domain. Adopting this change enables us to simplify parts of the code in genpd, for example the locking mechanism. Additionally, it gives some positive side effects, as described below. i) One device's ->runtime_resume() latency is no longer affected by other devices' latencies in a genpd. The complexity genpd has to support the option to abort the power off sequence suffers from latency issues. More precisely, a device that is requested to be runtime resumed, may end up waiting for __pm_genpd_save_device() to complete its operations for *another* device. That's because pm_genpd_poweroff() can't confirm an abort request while it waits for __pm_genpd_save_device() to return. As this patch removes the intermediate states in pm_genpd_poweroff() while powering off the PM domain, we no longer need the ability to abort that sequence. ii) Make pm_runtime[_status]_suspended() reliable when used with genpd. Until the last device in a genpd becomes idle, pm_genpd_runtime_suspend() will return 0 without actually walking the hierarchy of the ->runtime_suspend() callbacks. However, by returning 0 the runtime PM core considers the device as runtime_suspended, so pm_runtime[_status]_suspended() will return true, even though the device isn't (yet) runtime suspended. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, pm_runtime[_status]_suspended() will accurately reflect the status of the device. iii) Enable fine-grained PM through runtime PM callbacks in drivers/subsystems. There are currently cases were drivers/subsystems implements runtime PM callbacks to deploy fine-grained PM (e.g. gate clocks, move pinctrl to power-save state, etc.). While using the genpd, pm_genpd_runtime_suspend() postpones invoking these callbacks until *all* the devices in the genpd are runtime suspended. In essence, one runtime resumed device prevents fine-grained PM for other devices within the same genpd. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, fine-grained PM is enabled throughout all the levels of runtime PM callbacks. iiii) Enable fine-grained PM for IRQ safe devices Per the definition for an IRQ safe device, its runtime PM callbacks must be able to execute in atomic context. In the path while genpd walks the hierarchy of the ->runtime_suspend() callbacks for the device, it uses a mutex. Therefore, genpd prevents that path to be executed for IRQ safe devices. As this patch changes pm_genpd_runtime_suspend() to immediately walk the hierarchy of the ->runtime_suspend() callbacks and without needing to use a mutex, fine-grained PM is enabled throughout all the levels of runtime PM callbacks for IRQ safe devices. Unfortunately this patch also comes with a drawback, as described in the summary below. Driver's/subsystem's runtime PM callbacks may be invoked even when the genpd hasn't actually powered off the PM domain, potentially introducing unnecessary latency. However, in most cases, saving/restoring register contexts for devices are typically fast operations or can be optimized in device specific ways (e.g. shadow copies of register contents in memory, device-specific checks to see if context has been lost before restoring context, etc.). Still, in some cases the driver/subsystem may suffer from latency if runtime PM is used in a very fine-grained manner (e.g. for each IO request or xfer). To prevent that extra overhead, the driver/subsystem may deploy the runtime PM autosuspend feature. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-18 07:17:53 -06:00
mutex_unlock(&genpd->lock);
if (ret)
genpd_free_dev_data(dev, gpd_data);
else
dev_pm_qos_add_notifier(dev, &gpd_data->nb);
return ret;
}
/**
* pm_genpd_remove_device - Remove a device from an I/O PM domain.
* @genpd: PM domain to remove the device from.
* @dev: Device to be removed.
*/
int pm_genpd_remove_device(struct generic_pm_domain *genpd,
struct device *dev)
{
struct generic_pm_domain_data *gpd_data;
struct pm_domain_data *pdd;
int ret = 0;
dev_dbg(dev, "%s()\n", __func__);
if (!genpd || genpd != pm_genpd_lookup_dev(dev))
return -EINVAL;
/* The above validation also means we have existing domain_data. */
pdd = dev->power.subsys_data->domain_data;
gpd_data = to_gpd_data(pdd);
dev_pm_qos_remove_notifier(dev, &gpd_data->nb);
PM / Domains: Remove intermediate states from the power off sequence Genpd's ->runtime_suspend() (assigned to pm_genpd_runtime_suspend()) doesn't immediately walk the hierarchy of ->runtime_suspend() callbacks. Instead, pm_genpd_runtime_suspend() calls pm_genpd_poweroff() which postpones that until *all* the devices in the genpd are runtime suspended. When pm_genpd_poweroff() discovers that the last device in the genpd is about to be runtime suspended, it calls __pm_genpd_save_device() for *all* the devices in the genpd sequentially. Furthermore, __pm_genpd_save_device() invokes the ->start() callback, walks the hierarchy of the ->runtime_suspend() callbacks and invokes the ->stop() callback. This causes a "thundering herd" problem. Let's address this issue by having pm_genpd_runtime_suspend() immediately walk the hierarchy of the ->runtime_suspend() callbacks, instead of postponing that to the power off sequence via pm_genpd_poweroff(). If the selected ->runtime_suspend() callback doesn't return an error code, call pm_genpd_poweroff() to see if it's feasible to also power off the PM domain. Adopting this change enables us to simplify parts of the code in genpd, for example the locking mechanism. Additionally, it gives some positive side effects, as described below. i) One device's ->runtime_resume() latency is no longer affected by other devices' latencies in a genpd. The complexity genpd has to support the option to abort the power off sequence suffers from latency issues. More precisely, a device that is requested to be runtime resumed, may end up waiting for __pm_genpd_save_device() to complete its operations for *another* device. That's because pm_genpd_poweroff() can't confirm an abort request while it waits for __pm_genpd_save_device() to return. As this patch removes the intermediate states in pm_genpd_poweroff() while powering off the PM domain, we no longer need the ability to abort that sequence. ii) Make pm_runtime[_status]_suspended() reliable when used with genpd. Until the last device in a genpd becomes idle, pm_genpd_runtime_suspend() will return 0 without actually walking the hierarchy of the ->runtime_suspend() callbacks. However, by returning 0 the runtime PM core considers the device as runtime_suspended, so pm_runtime[_status]_suspended() will return true, even though the device isn't (yet) runtime suspended. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, pm_runtime[_status]_suspended() will accurately reflect the status of the device. iii) Enable fine-grained PM through runtime PM callbacks in drivers/subsystems. There are currently cases were drivers/subsystems implements runtime PM callbacks to deploy fine-grained PM (e.g. gate clocks, move pinctrl to power-save state, etc.). While using the genpd, pm_genpd_runtime_suspend() postpones invoking these callbacks until *all* the devices in the genpd are runtime suspended. In essence, one runtime resumed device prevents fine-grained PM for other devices within the same genpd. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, fine-grained PM is enabled throughout all the levels of runtime PM callbacks. iiii) Enable fine-grained PM for IRQ safe devices Per the definition for an IRQ safe device, its runtime PM callbacks must be able to execute in atomic context. In the path while genpd walks the hierarchy of the ->runtime_suspend() callbacks for the device, it uses a mutex. Therefore, genpd prevents that path to be executed for IRQ safe devices. As this patch changes pm_genpd_runtime_suspend() to immediately walk the hierarchy of the ->runtime_suspend() callbacks and without needing to use a mutex, fine-grained PM is enabled throughout all the levels of runtime PM callbacks for IRQ safe devices. Unfortunately this patch also comes with a drawback, as described in the summary below. Driver's/subsystem's runtime PM callbacks may be invoked even when the genpd hasn't actually powered off the PM domain, potentially introducing unnecessary latency. However, in most cases, saving/restoring register contexts for devices are typically fast operations or can be optimized in device specific ways (e.g. shadow copies of register contents in memory, device-specific checks to see if context has been lost before restoring context, etc.). Still, in some cases the driver/subsystem may suffer from latency if runtime PM is used in a very fine-grained manner (e.g. for each IO request or xfer). To prevent that extra overhead, the driver/subsystem may deploy the runtime PM autosuspend feature. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-18 07:17:53 -06:00
mutex_lock(&genpd->lock);
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
if (genpd->prepared_count > 0) {
ret = -EAGAIN;
goto out;
}
genpd->device_count--;
genpd->max_off_time_changed = true;
if (genpd->detach_dev)
genpd->detach_dev(genpd, dev);
list_del_init(&pdd->list_node);
PM / Domains: Remove intermediate states from the power off sequence Genpd's ->runtime_suspend() (assigned to pm_genpd_runtime_suspend()) doesn't immediately walk the hierarchy of ->runtime_suspend() callbacks. Instead, pm_genpd_runtime_suspend() calls pm_genpd_poweroff() which postpones that until *all* the devices in the genpd are runtime suspended. When pm_genpd_poweroff() discovers that the last device in the genpd is about to be runtime suspended, it calls __pm_genpd_save_device() for *all* the devices in the genpd sequentially. Furthermore, __pm_genpd_save_device() invokes the ->start() callback, walks the hierarchy of the ->runtime_suspend() callbacks and invokes the ->stop() callback. This causes a "thundering herd" problem. Let's address this issue by having pm_genpd_runtime_suspend() immediately walk the hierarchy of the ->runtime_suspend() callbacks, instead of postponing that to the power off sequence via pm_genpd_poweroff(). If the selected ->runtime_suspend() callback doesn't return an error code, call pm_genpd_poweroff() to see if it's feasible to also power off the PM domain. Adopting this change enables us to simplify parts of the code in genpd, for example the locking mechanism. Additionally, it gives some positive side effects, as described below. i) One device's ->runtime_resume() latency is no longer affected by other devices' latencies in a genpd. The complexity genpd has to support the option to abort the power off sequence suffers from latency issues. More precisely, a device that is requested to be runtime resumed, may end up waiting for __pm_genpd_save_device() to complete its operations for *another* device. That's because pm_genpd_poweroff() can't confirm an abort request while it waits for __pm_genpd_save_device() to return. As this patch removes the intermediate states in pm_genpd_poweroff() while powering off the PM domain, we no longer need the ability to abort that sequence. ii) Make pm_runtime[_status]_suspended() reliable when used with genpd. Until the last device in a genpd becomes idle, pm_genpd_runtime_suspend() will return 0 without actually walking the hierarchy of the ->runtime_suspend() callbacks. However, by returning 0 the runtime PM core considers the device as runtime_suspended, so pm_runtime[_status]_suspended() will return true, even though the device isn't (yet) runtime suspended. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, pm_runtime[_status]_suspended() will accurately reflect the status of the device. iii) Enable fine-grained PM through runtime PM callbacks in drivers/subsystems. There are currently cases were drivers/subsystems implements runtime PM callbacks to deploy fine-grained PM (e.g. gate clocks, move pinctrl to power-save state, etc.). While using the genpd, pm_genpd_runtime_suspend() postpones invoking these callbacks until *all* the devices in the genpd are runtime suspended. In essence, one runtime resumed device prevents fine-grained PM for other devices within the same genpd. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, fine-grained PM is enabled throughout all the levels of runtime PM callbacks. iiii) Enable fine-grained PM for IRQ safe devices Per the definition for an IRQ safe device, its runtime PM callbacks must be able to execute in atomic context. In the path while genpd walks the hierarchy of the ->runtime_suspend() callbacks for the device, it uses a mutex. Therefore, genpd prevents that path to be executed for IRQ safe devices. As this patch changes pm_genpd_runtime_suspend() to immediately walk the hierarchy of the ->runtime_suspend() callbacks and without needing to use a mutex, fine-grained PM is enabled throughout all the levels of runtime PM callbacks for IRQ safe devices. Unfortunately this patch also comes with a drawback, as described in the summary below. Driver's/subsystem's runtime PM callbacks may be invoked even when the genpd hasn't actually powered off the PM domain, potentially introducing unnecessary latency. However, in most cases, saving/restoring register contexts for devices are typically fast operations or can be optimized in device specific ways (e.g. shadow copies of register contents in memory, device-specific checks to see if context has been lost before restoring context, etc.). Still, in some cases the driver/subsystem may suffer from latency if runtime PM is used in a very fine-grained manner (e.g. for each IO request or xfer). To prevent that extra overhead, the driver/subsystem may deploy the runtime PM autosuspend feature. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-18 07:17:53 -06:00
mutex_unlock(&genpd->lock);
genpd_free_dev_data(dev, gpd_data);
return 0;
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
out:
PM / Domains: Remove intermediate states from the power off sequence Genpd's ->runtime_suspend() (assigned to pm_genpd_runtime_suspend()) doesn't immediately walk the hierarchy of ->runtime_suspend() callbacks. Instead, pm_genpd_runtime_suspend() calls pm_genpd_poweroff() which postpones that until *all* the devices in the genpd are runtime suspended. When pm_genpd_poweroff() discovers that the last device in the genpd is about to be runtime suspended, it calls __pm_genpd_save_device() for *all* the devices in the genpd sequentially. Furthermore, __pm_genpd_save_device() invokes the ->start() callback, walks the hierarchy of the ->runtime_suspend() callbacks and invokes the ->stop() callback. This causes a "thundering herd" problem. Let's address this issue by having pm_genpd_runtime_suspend() immediately walk the hierarchy of the ->runtime_suspend() callbacks, instead of postponing that to the power off sequence via pm_genpd_poweroff(). If the selected ->runtime_suspend() callback doesn't return an error code, call pm_genpd_poweroff() to see if it's feasible to also power off the PM domain. Adopting this change enables us to simplify parts of the code in genpd, for example the locking mechanism. Additionally, it gives some positive side effects, as described below. i) One device's ->runtime_resume() latency is no longer affected by other devices' latencies in a genpd. The complexity genpd has to support the option to abort the power off sequence suffers from latency issues. More precisely, a device that is requested to be runtime resumed, may end up waiting for __pm_genpd_save_device() to complete its operations for *another* device. That's because pm_genpd_poweroff() can't confirm an abort request while it waits for __pm_genpd_save_device() to return. As this patch removes the intermediate states in pm_genpd_poweroff() while powering off the PM domain, we no longer need the ability to abort that sequence. ii) Make pm_runtime[_status]_suspended() reliable when used with genpd. Until the last device in a genpd becomes idle, pm_genpd_runtime_suspend() will return 0 without actually walking the hierarchy of the ->runtime_suspend() callbacks. However, by returning 0 the runtime PM core considers the device as runtime_suspended, so pm_runtime[_status]_suspended() will return true, even though the device isn't (yet) runtime suspended. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, pm_runtime[_status]_suspended() will accurately reflect the status of the device. iii) Enable fine-grained PM through runtime PM callbacks in drivers/subsystems. There are currently cases were drivers/subsystems implements runtime PM callbacks to deploy fine-grained PM (e.g. gate clocks, move pinctrl to power-save state, etc.). While using the genpd, pm_genpd_runtime_suspend() postpones invoking these callbacks until *all* the devices in the genpd are runtime suspended. In essence, one runtime resumed device prevents fine-grained PM for other devices within the same genpd. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, fine-grained PM is enabled throughout all the levels of runtime PM callbacks. iiii) Enable fine-grained PM for IRQ safe devices Per the definition for an IRQ safe device, its runtime PM callbacks must be able to execute in atomic context. In the path while genpd walks the hierarchy of the ->runtime_suspend() callbacks for the device, it uses a mutex. Therefore, genpd prevents that path to be executed for IRQ safe devices. As this patch changes pm_genpd_runtime_suspend() to immediately walk the hierarchy of the ->runtime_suspend() callbacks and without needing to use a mutex, fine-grained PM is enabled throughout all the levels of runtime PM callbacks for IRQ safe devices. Unfortunately this patch also comes with a drawback, as described in the summary below. Driver's/subsystem's runtime PM callbacks may be invoked even when the genpd hasn't actually powered off the PM domain, potentially introducing unnecessary latency. However, in most cases, saving/restoring register contexts for devices are typically fast operations or can be optimized in device specific ways (e.g. shadow copies of register contents in memory, device-specific checks to see if context has been lost before restoring context, etc.). Still, in some cases the driver/subsystem may suffer from latency if runtime PM is used in a very fine-grained manner (e.g. for each IO request or xfer). To prevent that extra overhead, the driver/subsystem may deploy the runtime PM autosuspend feature. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-18 07:17:53 -06:00
mutex_unlock(&genpd->lock);
dev_pm_qos_add_notifier(dev, &gpd_data->nb);
return ret;
}
/**
* pm_genpd_add_subdomain - Add a subdomain to an I/O PM domain.
* @genpd: Master PM domain to add the subdomain to.
* @subdomain: Subdomain to be added.
*/
int pm_genpd_add_subdomain(struct generic_pm_domain *genpd,
struct generic_pm_domain *subdomain)
{
PM / Domains: Allow generic PM domains to have multiple masters Currently, for a given generic PM domain there may be only one parent domain (i.e. a PM domain it depends on). However, there is at least one real-life case in which there should be two parents (masters) for one PM domain (the A3RV domain on SH7372 turns out to depend on the A4LC domain and it depends on the A4R domain and the same time). For this reason, allow a PM domain to have multiple parents (masters) by introducing objects representing links between PM domains. The (logical) links between PM domains represent relationships in which one domain is a master (i.e. it is depended on) and another domain is a slave (i.e. it depends on the master) with the rule that the slave cannot be powered on if the master is not powered on and the master cannot be powered off if the slave is not powered off. Each struct generic_pm_domain object representing a PM domain has two lists of links, a list of links in which it is a master and a list of links in which it is a slave. The first of these lists replaces the list of subdomains and the second one is used in place of the parent pointer. Each link is represented by struct gpd_link object containing pointers to the master and the slave and two struct list_head members allowing it to hook into two lists (the master's list of "master" links and the slave's list of "slave" links). This allows the code to get to the link from each side (either from the master or from the slave) and follow it in each direction. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-08-08 15:43:40 -06:00
struct gpd_link *link;
int ret = 0;
if (IS_ERR_OR_NULL(genpd) || IS_ERR_OR_NULL(subdomain)
|| genpd == subdomain)
return -EINVAL;
PM / Domains: Remove intermediate states from the power off sequence Genpd's ->runtime_suspend() (assigned to pm_genpd_runtime_suspend()) doesn't immediately walk the hierarchy of ->runtime_suspend() callbacks. Instead, pm_genpd_runtime_suspend() calls pm_genpd_poweroff() which postpones that until *all* the devices in the genpd are runtime suspended. When pm_genpd_poweroff() discovers that the last device in the genpd is about to be runtime suspended, it calls __pm_genpd_save_device() for *all* the devices in the genpd sequentially. Furthermore, __pm_genpd_save_device() invokes the ->start() callback, walks the hierarchy of the ->runtime_suspend() callbacks and invokes the ->stop() callback. This causes a "thundering herd" problem. Let's address this issue by having pm_genpd_runtime_suspend() immediately walk the hierarchy of the ->runtime_suspend() callbacks, instead of postponing that to the power off sequence via pm_genpd_poweroff(). If the selected ->runtime_suspend() callback doesn't return an error code, call pm_genpd_poweroff() to see if it's feasible to also power off the PM domain. Adopting this change enables us to simplify parts of the code in genpd, for example the locking mechanism. Additionally, it gives some positive side effects, as described below. i) One device's ->runtime_resume() latency is no longer affected by other devices' latencies in a genpd. The complexity genpd has to support the option to abort the power off sequence suffers from latency issues. More precisely, a device that is requested to be runtime resumed, may end up waiting for __pm_genpd_save_device() to complete its operations for *another* device. That's because pm_genpd_poweroff() can't confirm an abort request while it waits for __pm_genpd_save_device() to return. As this patch removes the intermediate states in pm_genpd_poweroff() while powering off the PM domain, we no longer need the ability to abort that sequence. ii) Make pm_runtime[_status]_suspended() reliable when used with genpd. Until the last device in a genpd becomes idle, pm_genpd_runtime_suspend() will return 0 without actually walking the hierarchy of the ->runtime_suspend() callbacks. However, by returning 0 the runtime PM core considers the device as runtime_suspended, so pm_runtime[_status]_suspended() will return true, even though the device isn't (yet) runtime suspended. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, pm_runtime[_status]_suspended() will accurately reflect the status of the device. iii) Enable fine-grained PM through runtime PM callbacks in drivers/subsystems. There are currently cases were drivers/subsystems implements runtime PM callbacks to deploy fine-grained PM (e.g. gate clocks, move pinctrl to power-save state, etc.). While using the genpd, pm_genpd_runtime_suspend() postpones invoking these callbacks until *all* the devices in the genpd are runtime suspended. In essence, one runtime resumed device prevents fine-grained PM for other devices within the same genpd. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, fine-grained PM is enabled throughout all the levels of runtime PM callbacks. iiii) Enable fine-grained PM for IRQ safe devices Per the definition for an IRQ safe device, its runtime PM callbacks must be able to execute in atomic context. In the path while genpd walks the hierarchy of the ->runtime_suspend() callbacks for the device, it uses a mutex. Therefore, genpd prevents that path to be executed for IRQ safe devices. As this patch changes pm_genpd_runtime_suspend() to immediately walk the hierarchy of the ->runtime_suspend() callbacks and without needing to use a mutex, fine-grained PM is enabled throughout all the levels of runtime PM callbacks for IRQ safe devices. Unfortunately this patch also comes with a drawback, as described in the summary below. Driver's/subsystem's runtime PM callbacks may be invoked even when the genpd hasn't actually powered off the PM domain, potentially introducing unnecessary latency. However, in most cases, saving/restoring register contexts for devices are typically fast operations or can be optimized in device specific ways (e.g. shadow copies of register contents in memory, device-specific checks to see if context has been lost before restoring context, etc.). Still, in some cases the driver/subsystem may suffer from latency if runtime PM is used in a very fine-grained manner (e.g. for each IO request or xfer). To prevent that extra overhead, the driver/subsystem may deploy the runtime PM autosuspend feature. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-18 07:17:53 -06:00
mutex_lock(&genpd->lock);
mutex_lock_nested(&subdomain->lock, SINGLE_DEPTH_NESTING);
if (genpd->status == GPD_STATE_POWER_OFF
&& subdomain->status != GPD_STATE_POWER_OFF) {
ret = -EINVAL;
goto out;
}
list_for_each_entry(link, &genpd->master_links, master_node) {
if (link->slave == subdomain && link->master == genpd) {
ret = -EINVAL;
goto out;
}
}
PM / Domains: Allow generic PM domains to have multiple masters Currently, for a given generic PM domain there may be only one parent domain (i.e. a PM domain it depends on). However, there is at least one real-life case in which there should be two parents (masters) for one PM domain (the A3RV domain on SH7372 turns out to depend on the A4LC domain and it depends on the A4R domain and the same time). For this reason, allow a PM domain to have multiple parents (masters) by introducing objects representing links between PM domains. The (logical) links between PM domains represent relationships in which one domain is a master (i.e. it is depended on) and another domain is a slave (i.e. it depends on the master) with the rule that the slave cannot be powered on if the master is not powered on and the master cannot be powered off if the slave is not powered off. Each struct generic_pm_domain object representing a PM domain has two lists of links, a list of links in which it is a master and a list of links in which it is a slave. The first of these lists replaces the list of subdomains and the second one is used in place of the parent pointer. Each link is represented by struct gpd_link object containing pointers to the master and the slave and two struct list_head members allowing it to hook into two lists (the master's list of "master" links and the slave's list of "slave" links). This allows the code to get to the link from each side (either from the master or from the slave) and follow it in each direction. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-08-08 15:43:40 -06:00
link = kzalloc(sizeof(*link), GFP_KERNEL);
if (!link) {
ret = -ENOMEM;
goto out;
}
link->master = genpd;
list_add_tail(&link->master_node, &genpd->master_links);
link->slave = subdomain;
list_add_tail(&link->slave_node, &subdomain->slave_links);
if (subdomain->status != GPD_STATE_POWER_OFF)
genpd_sd_counter_inc(genpd);
out:
mutex_unlock(&subdomain->lock);
PM / Domains: Remove intermediate states from the power off sequence Genpd's ->runtime_suspend() (assigned to pm_genpd_runtime_suspend()) doesn't immediately walk the hierarchy of ->runtime_suspend() callbacks. Instead, pm_genpd_runtime_suspend() calls pm_genpd_poweroff() which postpones that until *all* the devices in the genpd are runtime suspended. When pm_genpd_poweroff() discovers that the last device in the genpd is about to be runtime suspended, it calls __pm_genpd_save_device() for *all* the devices in the genpd sequentially. Furthermore, __pm_genpd_save_device() invokes the ->start() callback, walks the hierarchy of the ->runtime_suspend() callbacks and invokes the ->stop() callback. This causes a "thundering herd" problem. Let's address this issue by having pm_genpd_runtime_suspend() immediately walk the hierarchy of the ->runtime_suspend() callbacks, instead of postponing that to the power off sequence via pm_genpd_poweroff(). If the selected ->runtime_suspend() callback doesn't return an error code, call pm_genpd_poweroff() to see if it's feasible to also power off the PM domain. Adopting this change enables us to simplify parts of the code in genpd, for example the locking mechanism. Additionally, it gives some positive side effects, as described below. i) One device's ->runtime_resume() latency is no longer affected by other devices' latencies in a genpd. The complexity genpd has to support the option to abort the power off sequence suffers from latency issues. More precisely, a device that is requested to be runtime resumed, may end up waiting for __pm_genpd_save_device() to complete its operations for *another* device. That's because pm_genpd_poweroff() can't confirm an abort request while it waits for __pm_genpd_save_device() to return. As this patch removes the intermediate states in pm_genpd_poweroff() while powering off the PM domain, we no longer need the ability to abort that sequence. ii) Make pm_runtime[_status]_suspended() reliable when used with genpd. Until the last device in a genpd becomes idle, pm_genpd_runtime_suspend() will return 0 without actually walking the hierarchy of the ->runtime_suspend() callbacks. However, by returning 0 the runtime PM core considers the device as runtime_suspended, so pm_runtime[_status]_suspended() will return true, even though the device isn't (yet) runtime suspended. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, pm_runtime[_status]_suspended() will accurately reflect the status of the device. iii) Enable fine-grained PM through runtime PM callbacks in drivers/subsystems. There are currently cases were drivers/subsystems implements runtime PM callbacks to deploy fine-grained PM (e.g. gate clocks, move pinctrl to power-save state, etc.). While using the genpd, pm_genpd_runtime_suspend() postpones invoking these callbacks until *all* the devices in the genpd are runtime suspended. In essence, one runtime resumed device prevents fine-grained PM for other devices within the same genpd. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, fine-grained PM is enabled throughout all the levels of runtime PM callbacks. iiii) Enable fine-grained PM for IRQ safe devices Per the definition for an IRQ safe device, its runtime PM callbacks must be able to execute in atomic context. In the path while genpd walks the hierarchy of the ->runtime_suspend() callbacks for the device, it uses a mutex. Therefore, genpd prevents that path to be executed for IRQ safe devices. As this patch changes pm_genpd_runtime_suspend() to immediately walk the hierarchy of the ->runtime_suspend() callbacks and without needing to use a mutex, fine-grained PM is enabled throughout all the levels of runtime PM callbacks for IRQ safe devices. Unfortunately this patch also comes with a drawback, as described in the summary below. Driver's/subsystem's runtime PM callbacks may be invoked even when the genpd hasn't actually powered off the PM domain, potentially introducing unnecessary latency. However, in most cases, saving/restoring register contexts for devices are typically fast operations or can be optimized in device specific ways (e.g. shadow copies of register contents in memory, device-specific checks to see if context has been lost before restoring context, etc.). Still, in some cases the driver/subsystem may suffer from latency if runtime PM is used in a very fine-grained manner (e.g. for each IO request or xfer). To prevent that extra overhead, the driver/subsystem may deploy the runtime PM autosuspend feature. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-18 07:17:53 -06:00
mutex_unlock(&genpd->lock);
return ret;
}
/**
* pm_genpd_remove_subdomain - Remove a subdomain from an I/O PM domain.
* @genpd: Master PM domain to remove the subdomain from.
PM / Domains: Allow generic PM domains to have multiple masters Currently, for a given generic PM domain there may be only one parent domain (i.e. a PM domain it depends on). However, there is at least one real-life case in which there should be two parents (masters) for one PM domain (the A3RV domain on SH7372 turns out to depend on the A4LC domain and it depends on the A4R domain and the same time). For this reason, allow a PM domain to have multiple parents (masters) by introducing objects representing links between PM domains. The (logical) links between PM domains represent relationships in which one domain is a master (i.e. it is depended on) and another domain is a slave (i.e. it depends on the master) with the rule that the slave cannot be powered on if the master is not powered on and the master cannot be powered off if the slave is not powered off. Each struct generic_pm_domain object representing a PM domain has two lists of links, a list of links in which it is a master and a list of links in which it is a slave. The first of these lists replaces the list of subdomains and the second one is used in place of the parent pointer. Each link is represented by struct gpd_link object containing pointers to the master and the slave and two struct list_head members allowing it to hook into two lists (the master's list of "master" links and the slave's list of "slave" links). This allows the code to get to the link from each side (either from the master or from the slave) and follow it in each direction. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-08-08 15:43:40 -06:00
* @subdomain: Subdomain to be removed.
*/
int pm_genpd_remove_subdomain(struct generic_pm_domain *genpd,
PM / Domains: Allow generic PM domains to have multiple masters Currently, for a given generic PM domain there may be only one parent domain (i.e. a PM domain it depends on). However, there is at least one real-life case in which there should be two parents (masters) for one PM domain (the A3RV domain on SH7372 turns out to depend on the A4LC domain and it depends on the A4R domain and the same time). For this reason, allow a PM domain to have multiple parents (masters) by introducing objects representing links between PM domains. The (logical) links between PM domains represent relationships in which one domain is a master (i.e. it is depended on) and another domain is a slave (i.e. it depends on the master) with the rule that the slave cannot be powered on if the master is not powered on and the master cannot be powered off if the slave is not powered off. Each struct generic_pm_domain object representing a PM domain has two lists of links, a list of links in which it is a master and a list of links in which it is a slave. The first of these lists replaces the list of subdomains and the second one is used in place of the parent pointer. Each link is represented by struct gpd_link object containing pointers to the master and the slave and two struct list_head members allowing it to hook into two lists (the master's list of "master" links and the slave's list of "slave" links). This allows the code to get to the link from each side (either from the master or from the slave) and follow it in each direction. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-08-08 15:43:40 -06:00
struct generic_pm_domain *subdomain)
{
PM / Domains: Allow generic PM domains to have multiple masters Currently, for a given generic PM domain there may be only one parent domain (i.e. a PM domain it depends on). However, there is at least one real-life case in which there should be two parents (masters) for one PM domain (the A3RV domain on SH7372 turns out to depend on the A4LC domain and it depends on the A4R domain and the same time). For this reason, allow a PM domain to have multiple parents (masters) by introducing objects representing links between PM domains. The (logical) links between PM domains represent relationships in which one domain is a master (i.e. it is depended on) and another domain is a slave (i.e. it depends on the master) with the rule that the slave cannot be powered on if the master is not powered on and the master cannot be powered off if the slave is not powered off. Each struct generic_pm_domain object representing a PM domain has two lists of links, a list of links in which it is a master and a list of links in which it is a slave. The first of these lists replaces the list of subdomains and the second one is used in place of the parent pointer. Each link is represented by struct gpd_link object containing pointers to the master and the slave and two struct list_head members allowing it to hook into two lists (the master's list of "master" links and the slave's list of "slave" links). This allows the code to get to the link from each side (either from the master or from the slave) and follow it in each direction. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-08-08 15:43:40 -06:00
struct gpd_link *link;
int ret = -EINVAL;
PM / Domains: Allow generic PM domains to have multiple masters Currently, for a given generic PM domain there may be only one parent domain (i.e. a PM domain it depends on). However, there is at least one real-life case in which there should be two parents (masters) for one PM domain (the A3RV domain on SH7372 turns out to depend on the A4LC domain and it depends on the A4R domain and the same time). For this reason, allow a PM domain to have multiple parents (masters) by introducing objects representing links between PM domains. The (logical) links between PM domains represent relationships in which one domain is a master (i.e. it is depended on) and another domain is a slave (i.e. it depends on the master) with the rule that the slave cannot be powered on if the master is not powered on and the master cannot be powered off if the slave is not powered off. Each struct generic_pm_domain object representing a PM domain has two lists of links, a list of links in which it is a master and a list of links in which it is a slave. The first of these lists replaces the list of subdomains and the second one is used in place of the parent pointer. Each link is represented by struct gpd_link object containing pointers to the master and the slave and two struct list_head members allowing it to hook into two lists (the master's list of "master" links and the slave's list of "slave" links). This allows the code to get to the link from each side (either from the master or from the slave) and follow it in each direction. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-08-08 15:43:40 -06:00
if (IS_ERR_OR_NULL(genpd) || IS_ERR_OR_NULL(subdomain))
return -EINVAL;
PM / Domains: Remove intermediate states from the power off sequence Genpd's ->runtime_suspend() (assigned to pm_genpd_runtime_suspend()) doesn't immediately walk the hierarchy of ->runtime_suspend() callbacks. Instead, pm_genpd_runtime_suspend() calls pm_genpd_poweroff() which postpones that until *all* the devices in the genpd are runtime suspended. When pm_genpd_poweroff() discovers that the last device in the genpd is about to be runtime suspended, it calls __pm_genpd_save_device() for *all* the devices in the genpd sequentially. Furthermore, __pm_genpd_save_device() invokes the ->start() callback, walks the hierarchy of the ->runtime_suspend() callbacks and invokes the ->stop() callback. This causes a "thundering herd" problem. Let's address this issue by having pm_genpd_runtime_suspend() immediately walk the hierarchy of the ->runtime_suspend() callbacks, instead of postponing that to the power off sequence via pm_genpd_poweroff(). If the selected ->runtime_suspend() callback doesn't return an error code, call pm_genpd_poweroff() to see if it's feasible to also power off the PM domain. Adopting this change enables us to simplify parts of the code in genpd, for example the locking mechanism. Additionally, it gives some positive side effects, as described below. i) One device's ->runtime_resume() latency is no longer affected by other devices' latencies in a genpd. The complexity genpd has to support the option to abort the power off sequence suffers from latency issues. More precisely, a device that is requested to be runtime resumed, may end up waiting for __pm_genpd_save_device() to complete its operations for *another* device. That's because pm_genpd_poweroff() can't confirm an abort request while it waits for __pm_genpd_save_device() to return. As this patch removes the intermediate states in pm_genpd_poweroff() while powering off the PM domain, we no longer need the ability to abort that sequence. ii) Make pm_runtime[_status]_suspended() reliable when used with genpd. Until the last device in a genpd becomes idle, pm_genpd_runtime_suspend() will return 0 without actually walking the hierarchy of the ->runtime_suspend() callbacks. However, by returning 0 the runtime PM core considers the device as runtime_suspended, so pm_runtime[_status]_suspended() will return true, even though the device isn't (yet) runtime suspended. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, pm_runtime[_status]_suspended() will accurately reflect the status of the device. iii) Enable fine-grained PM through runtime PM callbacks in drivers/subsystems. There are currently cases were drivers/subsystems implements runtime PM callbacks to deploy fine-grained PM (e.g. gate clocks, move pinctrl to power-save state, etc.). While using the genpd, pm_genpd_runtime_suspend() postpones invoking these callbacks until *all* the devices in the genpd are runtime suspended. In essence, one runtime resumed device prevents fine-grained PM for other devices within the same genpd. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, fine-grained PM is enabled throughout all the levels of runtime PM callbacks. iiii) Enable fine-grained PM for IRQ safe devices Per the definition for an IRQ safe device, its runtime PM callbacks must be able to execute in atomic context. In the path while genpd walks the hierarchy of the ->runtime_suspend() callbacks for the device, it uses a mutex. Therefore, genpd prevents that path to be executed for IRQ safe devices. As this patch changes pm_genpd_runtime_suspend() to immediately walk the hierarchy of the ->runtime_suspend() callbacks and without needing to use a mutex, fine-grained PM is enabled throughout all the levels of runtime PM callbacks for IRQ safe devices. Unfortunately this patch also comes with a drawback, as described in the summary below. Driver's/subsystem's runtime PM callbacks may be invoked even when the genpd hasn't actually powered off the PM domain, potentially introducing unnecessary latency. However, in most cases, saving/restoring register contexts for devices are typically fast operations or can be optimized in device specific ways (e.g. shadow copies of register contents in memory, device-specific checks to see if context has been lost before restoring context, etc.). Still, in some cases the driver/subsystem may suffer from latency if runtime PM is used in a very fine-grained manner (e.g. for each IO request or xfer). To prevent that extra overhead, the driver/subsystem may deploy the runtime PM autosuspend feature. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-18 07:17:53 -06:00
mutex_lock(&genpd->lock);
if (!list_empty(&subdomain->slave_links) || subdomain->device_count) {
pr_warn("%s: unable to remove subdomain %s\n", genpd->name,
subdomain->name);
ret = -EBUSY;
goto out;
}
PM / Domains: Allow generic PM domains to have multiple masters Currently, for a given generic PM domain there may be only one parent domain (i.e. a PM domain it depends on). However, there is at least one real-life case in which there should be two parents (masters) for one PM domain (the A3RV domain on SH7372 turns out to depend on the A4LC domain and it depends on the A4R domain and the same time). For this reason, allow a PM domain to have multiple parents (masters) by introducing objects representing links between PM domains. The (logical) links between PM domains represent relationships in which one domain is a master (i.e. it is depended on) and another domain is a slave (i.e. it depends on the master) with the rule that the slave cannot be powered on if the master is not powered on and the master cannot be powered off if the slave is not powered off. Each struct generic_pm_domain object representing a PM domain has two lists of links, a list of links in which it is a master and a list of links in which it is a slave. The first of these lists replaces the list of subdomains and the second one is used in place of the parent pointer. Each link is represented by struct gpd_link object containing pointers to the master and the slave and two struct list_head members allowing it to hook into two lists (the master's list of "master" links and the slave's list of "slave" links). This allows the code to get to the link from each side (either from the master or from the slave) and follow it in each direction. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-08-08 15:43:40 -06:00
list_for_each_entry(link, &genpd->master_links, master_node) {
if (link->slave != subdomain)
continue;
mutex_lock_nested(&subdomain->lock, SINGLE_DEPTH_NESTING);
PM / Domains: Allow generic PM domains to have multiple masters Currently, for a given generic PM domain there may be only one parent domain (i.e. a PM domain it depends on). However, there is at least one real-life case in which there should be two parents (masters) for one PM domain (the A3RV domain on SH7372 turns out to depend on the A4LC domain and it depends on the A4R domain and the same time). For this reason, allow a PM domain to have multiple parents (masters) by introducing objects representing links between PM domains. The (logical) links between PM domains represent relationships in which one domain is a master (i.e. it is depended on) and another domain is a slave (i.e. it depends on the master) with the rule that the slave cannot be powered on if the master is not powered on and the master cannot be powered off if the slave is not powered off. Each struct generic_pm_domain object representing a PM domain has two lists of links, a list of links in which it is a master and a list of links in which it is a slave. The first of these lists replaces the list of subdomains and the second one is used in place of the parent pointer. Each link is represented by struct gpd_link object containing pointers to the master and the slave and two struct list_head members allowing it to hook into two lists (the master's list of "master" links and the slave's list of "slave" links). This allows the code to get to the link from each side (either from the master or from the slave) and follow it in each direction. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-08-08 15:43:40 -06:00
list_del(&link->master_node);
list_del(&link->slave_node);
kfree(link);
if (subdomain->status != GPD_STATE_POWER_OFF)
genpd_sd_counter_dec(genpd);
mutex_unlock(&subdomain->lock);
ret = 0;
break;
}
out:
PM / Domains: Remove intermediate states from the power off sequence Genpd's ->runtime_suspend() (assigned to pm_genpd_runtime_suspend()) doesn't immediately walk the hierarchy of ->runtime_suspend() callbacks. Instead, pm_genpd_runtime_suspend() calls pm_genpd_poweroff() which postpones that until *all* the devices in the genpd are runtime suspended. When pm_genpd_poweroff() discovers that the last device in the genpd is about to be runtime suspended, it calls __pm_genpd_save_device() for *all* the devices in the genpd sequentially. Furthermore, __pm_genpd_save_device() invokes the ->start() callback, walks the hierarchy of the ->runtime_suspend() callbacks and invokes the ->stop() callback. This causes a "thundering herd" problem. Let's address this issue by having pm_genpd_runtime_suspend() immediately walk the hierarchy of the ->runtime_suspend() callbacks, instead of postponing that to the power off sequence via pm_genpd_poweroff(). If the selected ->runtime_suspend() callback doesn't return an error code, call pm_genpd_poweroff() to see if it's feasible to also power off the PM domain. Adopting this change enables us to simplify parts of the code in genpd, for example the locking mechanism. Additionally, it gives some positive side effects, as described below. i) One device's ->runtime_resume() latency is no longer affected by other devices' latencies in a genpd. The complexity genpd has to support the option to abort the power off sequence suffers from latency issues. More precisely, a device that is requested to be runtime resumed, may end up waiting for __pm_genpd_save_device() to complete its operations for *another* device. That's because pm_genpd_poweroff() can't confirm an abort request while it waits for __pm_genpd_save_device() to return. As this patch removes the intermediate states in pm_genpd_poweroff() while powering off the PM domain, we no longer need the ability to abort that sequence. ii) Make pm_runtime[_status]_suspended() reliable when used with genpd. Until the last device in a genpd becomes idle, pm_genpd_runtime_suspend() will return 0 without actually walking the hierarchy of the ->runtime_suspend() callbacks. However, by returning 0 the runtime PM core considers the device as runtime_suspended, so pm_runtime[_status]_suspended() will return true, even though the device isn't (yet) runtime suspended. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, pm_runtime[_status]_suspended() will accurately reflect the status of the device. iii) Enable fine-grained PM through runtime PM callbacks in drivers/subsystems. There are currently cases were drivers/subsystems implements runtime PM callbacks to deploy fine-grained PM (e.g. gate clocks, move pinctrl to power-save state, etc.). While using the genpd, pm_genpd_runtime_suspend() postpones invoking these callbacks until *all* the devices in the genpd are runtime suspended. In essence, one runtime resumed device prevents fine-grained PM for other devices within the same genpd. After this patch, since pm_genpd_runtime_suspend() immediately walks the hierarchy of the ->runtime_suspend() callbacks, fine-grained PM is enabled throughout all the levels of runtime PM callbacks. iiii) Enable fine-grained PM for IRQ safe devices Per the definition for an IRQ safe device, its runtime PM callbacks must be able to execute in atomic context. In the path while genpd walks the hierarchy of the ->runtime_suspend() callbacks for the device, it uses a mutex. Therefore, genpd prevents that path to be executed for IRQ safe devices. As this patch changes pm_genpd_runtime_suspend() to immediately walk the hierarchy of the ->runtime_suspend() callbacks and without needing to use a mutex, fine-grained PM is enabled throughout all the levels of runtime PM callbacks for IRQ safe devices. Unfortunately this patch also comes with a drawback, as described in the summary below. Driver's/subsystem's runtime PM callbacks may be invoked even when the genpd hasn't actually powered off the PM domain, potentially introducing unnecessary latency. However, in most cases, saving/restoring register contexts for devices are typically fast operations or can be optimized in device specific ways (e.g. shadow copies of register contents in memory, device-specific checks to see if context has been lost before restoring context, etc.). Still, in some cases the driver/subsystem may suffer from latency if runtime PM is used in a very fine-grained manner (e.g. for each IO request or xfer). To prevent that extra overhead, the driver/subsystem may deploy the runtime PM autosuspend feature. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-18 07:17:53 -06:00
mutex_unlock(&genpd->lock);
return ret;
}
PM / Domains: Rework system suspend callback routines (v2) The current generic PM domains code attempts to use the generic system suspend operations along with the domains' device stop/start routines, which requires device drivers to assume that their system suspend/resume (and hibernation/restore) callbacks will always be used with generic PM domains. However, in theory, the same hardware may be used in devices that don't belong to any PM domain, in which case it would be necessary to add "fake" PM domains to satisfy the above assumption. Also, the domain the hardware belongs to may not be handled with the help of the generic code. To allow device drivers that may be used along with the generic PM domains code of more flexibility, add new device callbacks, .suspend(), .suspend_late(), .resume_early(), .resume(), .freeze(), .freeze_late(), .thaw_early(), and .thaw(), that can be supplied by the drivers in addition to their "standard" system suspend and hibernation callbacks. These new callbacks, if defined, will be used by the generic PM domains code for the handling of system suspend and hibernation instead of the "standard" ones. This will allow drivers to be designed to work with generic PM domains as well as without them. For backwards compatibility, introduce default implementations of the new callbacks for PM domains that will execute pm_generic_suspend(), pm_generic_suspend_noirq(), pm_generic_resume_noirq(), pm_generic_resume(), pm_generic_freeze(), pm_generic_freeze_noirq(), pm_generic_thaw_noirq(), and pm_generic_thaw(), respectively, for the given device if its driver doesn't define those callbacks. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-11-27 05:11:51 -07:00
/* Default device callbacks for generic PM domains. */
/**
* pm_genpd_default_save_state - Default "save device state" for PM domains.
* @dev: Device to handle.
*/
static int pm_genpd_default_save_state(struct device *dev)
{
int (*cb)(struct device *__dev);
if (dev->type && dev->type->pm)
cb = dev->type->pm->runtime_suspend;
else if (dev->class && dev->class->pm)
cb = dev->class->pm->runtime_suspend;
else if (dev->bus && dev->bus->pm)
cb = dev->bus->pm->runtime_suspend;
else
cb = NULL;
if (!cb && dev->driver && dev->driver->pm)
cb = dev->driver->pm->runtime_suspend;
return cb ? cb(dev) : 0;
}
/**
* pm_genpd_default_restore_state - Default PM domains "restore device state".
* @dev: Device to handle.
*/
static int pm_genpd_default_restore_state(struct device *dev)
{
int (*cb)(struct device *__dev);
if (dev->type && dev->type->pm)
cb = dev->type->pm->runtime_resume;
else if (dev->class && dev->class->pm)
cb = dev->class->pm->runtime_resume;
else if (dev->bus && dev->bus->pm)
cb = dev->bus->pm->runtime_resume;
else
cb = NULL;
if (!cb && dev->driver && dev->driver->pm)
cb = dev->driver->pm->runtime_resume;
return cb ? cb(dev) : 0;
}
/**
* pm_genpd_init - Initialize a generic I/O PM domain object.
* @genpd: PM domain object to initialize.
* @gov: PM domain governor to associate with the domain (may be NULL).
* @is_off: Initial value of the domain's power_is_off field.
*/
void pm_genpd_init(struct generic_pm_domain *genpd,
struct dev_power_governor *gov, bool is_off)
{
if (IS_ERR_OR_NULL(genpd))
return;
PM / Domains: Allow generic PM domains to have multiple masters Currently, for a given generic PM domain there may be only one parent domain (i.e. a PM domain it depends on). However, there is at least one real-life case in which there should be two parents (masters) for one PM domain (the A3RV domain on SH7372 turns out to depend on the A4LC domain and it depends on the A4R domain and the same time). For this reason, allow a PM domain to have multiple parents (masters) by introducing objects representing links between PM domains. The (logical) links between PM domains represent relationships in which one domain is a master (i.e. it is depended on) and another domain is a slave (i.e. it depends on the master) with the rule that the slave cannot be powered on if the master is not powered on and the master cannot be powered off if the slave is not powered off. Each struct generic_pm_domain object representing a PM domain has two lists of links, a list of links in which it is a master and a list of links in which it is a slave. The first of these lists replaces the list of subdomains and the second one is used in place of the parent pointer. Each link is represented by struct gpd_link object containing pointers to the master and the slave and two struct list_head members allowing it to hook into two lists (the master's list of "master" links and the slave's list of "slave" links). This allows the code to get to the link from each side (either from the master or from the slave) and follow it in each direction. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-08-08 15:43:40 -06:00
INIT_LIST_HEAD(&genpd->master_links);
INIT_LIST_HEAD(&genpd->slave_links);
INIT_LIST_HEAD(&genpd->dev_list);
mutex_init(&genpd->lock);
genpd->gov = gov;
INIT_WORK(&genpd->power_off_work, genpd_power_off_work_fn);
atomic_set(&genpd->sd_count, 0);
genpd->status = is_off ? GPD_STATE_POWER_OFF : GPD_STATE_ACTIVE;
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
genpd->device_count = 0;
genpd->max_off_time_ns = -1;
genpd->max_off_time_changed = true;
genpd->domain.ops.runtime_suspend = pm_genpd_runtime_suspend;
genpd->domain.ops.runtime_resume = pm_genpd_runtime_resume;
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
genpd->domain.ops.prepare = pm_genpd_prepare;
genpd->domain.ops.suspend = pm_genpd_suspend;
genpd->domain.ops.suspend_late = pm_genpd_suspend_late;
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
genpd->domain.ops.suspend_noirq = pm_genpd_suspend_noirq;
genpd->domain.ops.resume_noirq = pm_genpd_resume_noirq;
genpd->domain.ops.resume_early = pm_genpd_resume_early;
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
genpd->domain.ops.resume = pm_genpd_resume;
genpd->domain.ops.freeze = pm_genpd_freeze;
genpd->domain.ops.freeze_late = pm_genpd_freeze_late;
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
genpd->domain.ops.freeze_noirq = pm_genpd_freeze_noirq;
genpd->domain.ops.thaw_noirq = pm_genpd_thaw_noirq;
genpd->domain.ops.thaw_early = pm_genpd_thaw_early;
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
genpd->domain.ops.thaw = pm_genpd_thaw;
PM / Domains: Rework system suspend callback routines (v2) The current generic PM domains code attempts to use the generic system suspend operations along with the domains' device stop/start routines, which requires device drivers to assume that their system suspend/resume (and hibernation/restore) callbacks will always be used with generic PM domains. However, in theory, the same hardware may be used in devices that don't belong to any PM domain, in which case it would be necessary to add "fake" PM domains to satisfy the above assumption. Also, the domain the hardware belongs to may not be handled with the help of the generic code. To allow device drivers that may be used along with the generic PM domains code of more flexibility, add new device callbacks, .suspend(), .suspend_late(), .resume_early(), .resume(), .freeze(), .freeze_late(), .thaw_early(), and .thaw(), that can be supplied by the drivers in addition to their "standard" system suspend and hibernation callbacks. These new callbacks, if defined, will be used by the generic PM domains code for the handling of system suspend and hibernation instead of the "standard" ones. This will allow drivers to be designed to work with generic PM domains as well as without them. For backwards compatibility, introduce default implementations of the new callbacks for PM domains that will execute pm_generic_suspend(), pm_generic_suspend_noirq(), pm_generic_resume_noirq(), pm_generic_resume(), pm_generic_freeze(), pm_generic_freeze_noirq(), pm_generic_thaw_noirq(), and pm_generic_thaw(), respectively, for the given device if its driver doesn't define those callbacks. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-11-27 05:11:51 -07:00
genpd->domain.ops.poweroff = pm_genpd_suspend;
genpd->domain.ops.poweroff_late = pm_genpd_suspend_late;
PM / Domains: Rework system suspend callback routines (v2) The current generic PM domains code attempts to use the generic system suspend operations along with the domains' device stop/start routines, which requires device drivers to assume that their system suspend/resume (and hibernation/restore) callbacks will always be used with generic PM domains. However, in theory, the same hardware may be used in devices that don't belong to any PM domain, in which case it would be necessary to add "fake" PM domains to satisfy the above assumption. Also, the domain the hardware belongs to may not be handled with the help of the generic code. To allow device drivers that may be used along with the generic PM domains code of more flexibility, add new device callbacks, .suspend(), .suspend_late(), .resume_early(), .resume(), .freeze(), .freeze_late(), .thaw_early(), and .thaw(), that can be supplied by the drivers in addition to their "standard" system suspend and hibernation callbacks. These new callbacks, if defined, will be used by the generic PM domains code for the handling of system suspend and hibernation instead of the "standard" ones. This will allow drivers to be designed to work with generic PM domains as well as without them. For backwards compatibility, introduce default implementations of the new callbacks for PM domains that will execute pm_generic_suspend(), pm_generic_suspend_noirq(), pm_generic_resume_noirq(), pm_generic_resume(), pm_generic_freeze(), pm_generic_freeze_noirq(), pm_generic_thaw_noirq(), and pm_generic_thaw(), respectively, for the given device if its driver doesn't define those callbacks. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-11-27 05:11:51 -07:00
genpd->domain.ops.poweroff_noirq = pm_genpd_suspend_noirq;
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
genpd->domain.ops.restore_noirq = pm_genpd_restore_noirq;
genpd->domain.ops.restore_early = pm_genpd_resume_early;
PM / Domains: Rework system suspend callback routines (v2) The current generic PM domains code attempts to use the generic system suspend operations along with the domains' device stop/start routines, which requires device drivers to assume that their system suspend/resume (and hibernation/restore) callbacks will always be used with generic PM domains. However, in theory, the same hardware may be used in devices that don't belong to any PM domain, in which case it would be necessary to add "fake" PM domains to satisfy the above assumption. Also, the domain the hardware belongs to may not be handled with the help of the generic code. To allow device drivers that may be used along with the generic PM domains code of more flexibility, add new device callbacks, .suspend(), .suspend_late(), .resume_early(), .resume(), .freeze(), .freeze_late(), .thaw_early(), and .thaw(), that can be supplied by the drivers in addition to their "standard" system suspend and hibernation callbacks. These new callbacks, if defined, will be used by the generic PM domains code for the handling of system suspend and hibernation instead of the "standard" ones. This will allow drivers to be designed to work with generic PM domains as well as without them. For backwards compatibility, introduce default implementations of the new callbacks for PM domains that will execute pm_generic_suspend(), pm_generic_suspend_noirq(), pm_generic_resume_noirq(), pm_generic_resume(), pm_generic_freeze(), pm_generic_freeze_noirq(), pm_generic_thaw_noirq(), and pm_generic_thaw(), respectively, for the given device if its driver doesn't define those callbacks. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-11-27 05:11:51 -07:00
genpd->domain.ops.restore = pm_genpd_resume;
PM / Domains: System-wide transitions support for generic domains (v5) Make generic PM domains support system-wide power transitions (system suspend and hibernation). Add suspend, resume, freeze, thaw, poweroff and restore callbacks to be associated with struct generic_pm_domain objects and make pm_genpd_init() use them as appropriate. The new callbacks do nothing for devices belonging to power domains that were powered down at run time (before the transition). For the other devices the action carried out depends on the type of the transition. During system suspend the power domain .suspend() callback executes pm_generic_suspend() for the device, while the PM domain .suspend_noirq() callback runs pm_generic_suspend_noirq() for it, stops it and eventually removes power from the PM domain it belongs to (after all devices in the domain have been stopped and its subdomains have been powered off). During system resume the PM domain .resume_noirq() callback restores power to the PM domain (when executed for it first time), starts the device and executes pm_generic_resume_noirq() for it, while the .resume() callback executes pm_generic_resume() for the device. Finally, the .complete() callback executes pm_runtime_idle() for the device which should put it back into the suspended state if its runtime PM usage count is equal to zero at that time. The actions carried out during hibernation and resume from it are analogous to the ones described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-01 14:13:19 -06:00
genpd->domain.ops.complete = pm_genpd_complete;
genpd->dev_ops.save_state = pm_genpd_default_save_state;
genpd->dev_ops.restore_state = pm_genpd_default_restore_state;
if (genpd->flags & GENPD_FLAG_PM_CLK) {
genpd->dev_ops.stop = pm_clk_suspend;
genpd->dev_ops.start = pm_clk_resume;
}
mutex_lock(&gpd_list_lock);
list_add(&genpd->gpd_list_node, &gpd_list);
mutex_unlock(&gpd_list_lock);
}
EXPORT_SYMBOL_GPL(pm_genpd_init);
#ifdef CONFIG_PM_GENERIC_DOMAINS_OF
/*
* Device Tree based PM domain providers.
*
* The code below implements generic device tree based PM domain providers that
* bind device tree nodes with generic PM domains registered in the system.
*
* Any driver that registers generic PM domains and needs to support binding of
* devices to these domains is supposed to register a PM domain provider, which
* maps a PM domain specifier retrieved from the device tree to a PM domain.
*
* Two simple mapping functions have been provided for convenience:
* - __of_genpd_xlate_simple() for 1:1 device tree node to PM domain mapping.
* - __of_genpd_xlate_onecell() for mapping of multiple PM domains per node by
* index.
*/
/**
* struct of_genpd_provider - PM domain provider registration structure
* @link: Entry in global list of PM domain providers
* @node: Pointer to device tree node of PM domain provider
* @xlate: Provider-specific xlate callback mapping a set of specifier cells
* into a PM domain.
* @data: context pointer to be passed into @xlate callback
*/
struct of_genpd_provider {
struct list_head link;
struct device_node *node;
genpd_xlate_t xlate;
void *data;
};
/* List of registered PM domain providers. */
static LIST_HEAD(of_genpd_providers);
/* Mutex to protect the list above. */
static DEFINE_MUTEX(of_genpd_mutex);
/**
* __of_genpd_xlate_simple() - Xlate function for direct node-domain mapping
* @genpdspec: OF phandle args to map into a PM domain
* @data: xlate function private data - pointer to struct generic_pm_domain
*
* This is a generic xlate function that can be used to model PM domains that
* have their own device tree nodes. The private data of xlate function needs
* to be a valid pointer to struct generic_pm_domain.
*/
struct generic_pm_domain *__of_genpd_xlate_simple(
struct of_phandle_args *genpdspec,
void *data)
{
if (genpdspec->args_count != 0)
return ERR_PTR(-EINVAL);
return data;
}
EXPORT_SYMBOL_GPL(__of_genpd_xlate_simple);
/**
* __of_genpd_xlate_onecell() - Xlate function using a single index.
* @genpdspec: OF phandle args to map into a PM domain
* @data: xlate function private data - pointer to struct genpd_onecell_data
*
* This is a generic xlate function that can be used to model simple PM domain
* controllers that have one device tree node and provide multiple PM domains.
* A single cell is used as an index into an array of PM domains specified in
* the genpd_onecell_data struct when registering the provider.
*/
struct generic_pm_domain *__of_genpd_xlate_onecell(
struct of_phandle_args *genpdspec,
void *data)
{
struct genpd_onecell_data *genpd_data = data;
unsigned int idx = genpdspec->args[0];
if (genpdspec->args_count != 1)
return ERR_PTR(-EINVAL);
if (idx >= genpd_data->num_domains) {
pr_err("%s: invalid domain index %u\n", __func__, idx);
return ERR_PTR(-EINVAL);
}
if (!genpd_data->domains[idx])
return ERR_PTR(-ENOENT);
return genpd_data->domains[idx];
}
EXPORT_SYMBOL_GPL(__of_genpd_xlate_onecell);
/**
* __of_genpd_add_provider() - Register a PM domain provider for a node
* @np: Device node pointer associated with the PM domain provider.
* @xlate: Callback for decoding PM domain from phandle arguments.
* @data: Context pointer for @xlate callback.
*/
int __of_genpd_add_provider(struct device_node *np, genpd_xlate_t xlate,
void *data)
{
struct of_genpd_provider *cp;
cp = kzalloc(sizeof(*cp), GFP_KERNEL);
if (!cp)
return -ENOMEM;
cp->node = of_node_get(np);
cp->data = data;
cp->xlate = xlate;
mutex_lock(&of_genpd_mutex);
list_add(&cp->link, &of_genpd_providers);
mutex_unlock(&of_genpd_mutex);
pr_debug("Added domain provider from %s\n", np->full_name);
return 0;
}
EXPORT_SYMBOL_GPL(__of_genpd_add_provider);
/**
* of_genpd_del_provider() - Remove a previously registered PM domain provider
* @np: Device node pointer associated with the PM domain provider
*/
void of_genpd_del_provider(struct device_node *np)
{
struct of_genpd_provider *cp;
mutex_lock(&of_genpd_mutex);
list_for_each_entry(cp, &of_genpd_providers, link) {
if (cp->node == np) {
list_del(&cp->link);
of_node_put(cp->node);
kfree(cp);
break;
}
}
mutex_unlock(&of_genpd_mutex);
}
EXPORT_SYMBOL_GPL(of_genpd_del_provider);
/**
* of_genpd_get_from_provider() - Look-up PM domain
* @genpdspec: OF phandle args to use for look-up
*
* Looks for a PM domain provider under the node specified by @genpdspec and if
* found, uses xlate function of the provider to map phandle args to a PM
* domain.
*
* Returns a valid pointer to struct generic_pm_domain on success or ERR_PTR()
* on failure.
*/
struct generic_pm_domain *of_genpd_get_from_provider(
struct of_phandle_args *genpdspec)
{
struct generic_pm_domain *genpd = ERR_PTR(-ENOENT);
struct of_genpd_provider *provider;
mutex_lock(&of_genpd_mutex);
/* Check if we have such a provider in our array */
list_for_each_entry(provider, &of_genpd_providers, link) {
if (provider->node == genpdspec->np)
genpd = provider->xlate(genpdspec, provider->data);
if (!IS_ERR(genpd))
break;
}
mutex_unlock(&of_genpd_mutex);
return genpd;
}
EXPORT_SYMBOL_GPL(of_genpd_get_from_provider);
/**
* genpd_dev_pm_detach - Detach a device from its PM domain.
* @dev: Device to detach.
* @power_off: Currently not used
*
* Try to locate a corresponding generic PM domain, which the device was
* attached to previously. If such is found, the device is detached from it.
*/
static void genpd_dev_pm_detach(struct device *dev, bool power_off)
{
struct generic_pm_domain *pd;
unsigned int i;
int ret = 0;
pd = pm_genpd_lookup_dev(dev);
if (!pd)
return;
dev_dbg(dev, "removing from PM domain %s\n", pd->name);
for (i = 1; i < GENPD_RETRY_MAX_MS; i <<= 1) {
ret = pm_genpd_remove_device(pd, dev);
if (ret != -EAGAIN)
break;
mdelay(i);
cond_resched();
}
if (ret < 0) {
dev_err(dev, "failed to remove from PM domain %s: %d",
pd->name, ret);
return;
}
/* Check if PM domain can be powered off after removing this device. */
genpd_queue_power_off_work(pd);
}
static void genpd_dev_pm_sync(struct device *dev)
{
struct generic_pm_domain *pd;
pd = dev_to_genpd(dev);
if (IS_ERR(pd))
return;
genpd_queue_power_off_work(pd);
}
/**
* genpd_dev_pm_attach - Attach a device to its PM domain using DT.
* @dev: Device to attach.
*
* Parse device's OF node to find a PM domain specifier. If such is found,
* attaches the device to retrieved pm_domain ops.
*
* Both generic and legacy Samsung-specific DT bindings are supported to keep
* backwards compatibility with existing DTBs.
*
* Returns 0 on successfully attached PM domain or negative error code. Note
* that if a power-domain exists for the device, but it cannot be found or
* turned on, then return -EPROBE_DEFER to ensure that the device is not
* probed and to re-try again later.
*/
int genpd_dev_pm_attach(struct device *dev)
{
struct of_phandle_args pd_args;
struct generic_pm_domain *pd;
unsigned int i;
int ret;
if (!dev->of_node)
return -ENODEV;
if (dev->pm_domain)
return -EEXIST;
ret = of_parse_phandle_with_args(dev->of_node, "power-domains",
"#power-domain-cells", 0, &pd_args);
if (ret < 0) {
if (ret != -ENOENT)
return ret;
/*
* Try legacy Samsung-specific bindings
* (for backwards compatibility of DT ABI)
*/
pd_args.args_count = 0;
pd_args.np = of_parse_phandle(dev->of_node,
"samsung,power-domain", 0);
if (!pd_args.np)
return -ENOENT;
}
pd = of_genpd_get_from_provider(&pd_args);
if (IS_ERR(pd)) {
dev_dbg(dev, "%s() failed to find PM domain: %ld\n",
__func__, PTR_ERR(pd));
of_node_put(dev->of_node);
return -EPROBE_DEFER;
}
dev_dbg(dev, "adding to PM domain %s\n", pd->name);
for (i = 1; i < GENPD_RETRY_MAX_MS; i <<= 1) {
ret = pm_genpd_add_device(pd, dev);
if (ret != -EAGAIN)
break;
mdelay(i);
cond_resched();
}
if (ret < 0) {
dev_err(dev, "failed to add to PM domain %s: %d",
pd->name, ret);
of_node_put(dev->of_node);
goto out;
}
dev->pm_domain->detach = genpd_dev_pm_detach;
dev->pm_domain->sync = genpd_dev_pm_sync;
ret = genpd_poweron(pd);
out:
return ret ? -EPROBE_DEFER : 0;
}
EXPORT_SYMBOL_GPL(genpd_dev_pm_attach);
#endif /* CONFIG_PM_GENERIC_DOMAINS_OF */
PM / Domains: add debugfs listing of struct generic_pm_domain-s Add /sys/kernel/debug/pm_genpd/pm_genpd_summary file, which lists power domains in the system, their statuses and attached devices, resembling /sys/kernel/debug/clk/clk_summary. Currently it is impossible to inspect (from userland) whether a power domain is on or off. And, if it is on, which device blocks it from powering down. This change allows developers working on embedded devices power efficiency to list all necessary information about generic power domains in one place. The content of pm_genpd/pm_genpd_summary file is generated by iterating over all generic power domain in the system, and, for each, over registered devices and over the subdomains, if present. Example output: $ cat /sys/kernel/debug/pm_genpd/pm_genpd_summary domain status slaves /device runtime status ---------------------------------------------------------------------- a4su off a3sg off a3sm on a3sp on /devices/e6600000.pwm suspended /devices/e6c50000.serial active /devices/e6850000.sd suspended /devices/e6bd0000.mmc active a4s on a3sp, a3sm, a3sg /devices/e6900000.irqpin unsupported /devices/e6900004.irqpin unsupported /devices/e6900008.irqpin unsupported /devices/e690000c.irqpin unsupported /devices/e9a00000.ethernet active a3rv off a4r off a3rv /devices/fff20000.i2c suspended a4lc off c5 on a4lc, a4r, a4s, a4su /devices/e6050000.pfc unsupported /devices/e6138000.timer active To enable this feature, compile the kernel with debugfs and CONFIG_PM_ADVANCED_DEBUG enabled. Signed-off-by: Maciej Matraszek <m.matraszek@samsung.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-15 05:09:10 -06:00
/*** debugfs support ***/
#ifdef CONFIG_PM_ADVANCED_DEBUG
#include <linux/pm.h>
#include <linux/device.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <linux/init.h>
#include <linux/kobject.h>
static struct dentry *pm_genpd_debugfs_dir;
/*
* TODO: This function is a slightly modified version of rtpm_status_show
* from sysfs.c, so generalize it.
PM / Domains: add debugfs listing of struct generic_pm_domain-s Add /sys/kernel/debug/pm_genpd/pm_genpd_summary file, which lists power domains in the system, their statuses and attached devices, resembling /sys/kernel/debug/clk/clk_summary. Currently it is impossible to inspect (from userland) whether a power domain is on or off. And, if it is on, which device blocks it from powering down. This change allows developers working on embedded devices power efficiency to list all necessary information about generic power domains in one place. The content of pm_genpd/pm_genpd_summary file is generated by iterating over all generic power domain in the system, and, for each, over registered devices and over the subdomains, if present. Example output: $ cat /sys/kernel/debug/pm_genpd/pm_genpd_summary domain status slaves /device runtime status ---------------------------------------------------------------------- a4su off a3sg off a3sm on a3sp on /devices/e6600000.pwm suspended /devices/e6c50000.serial active /devices/e6850000.sd suspended /devices/e6bd0000.mmc active a4s on a3sp, a3sm, a3sg /devices/e6900000.irqpin unsupported /devices/e6900004.irqpin unsupported /devices/e6900008.irqpin unsupported /devices/e690000c.irqpin unsupported /devices/e9a00000.ethernet active a3rv off a4r off a3rv /devices/fff20000.i2c suspended a4lc off c5 on a4lc, a4r, a4s, a4su /devices/e6050000.pfc unsupported /devices/e6138000.timer active To enable this feature, compile the kernel with debugfs and CONFIG_PM_ADVANCED_DEBUG enabled. Signed-off-by: Maciej Matraszek <m.matraszek@samsung.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-15 05:09:10 -06:00
*/
static void rtpm_status_str(struct seq_file *s, struct device *dev)
{
static const char * const status_lookup[] = {
[RPM_ACTIVE] = "active",
[RPM_RESUMING] = "resuming",
[RPM_SUSPENDED] = "suspended",
[RPM_SUSPENDING] = "suspending"
};
const char *p = "";
if (dev->power.runtime_error)
p = "error";
else if (dev->power.disable_depth)
p = "unsupported";
else if (dev->power.runtime_status < ARRAY_SIZE(status_lookup))
p = status_lookup[dev->power.runtime_status];
else
WARN_ON(1);
seq_puts(s, p);
}
static int pm_genpd_summary_one(struct seq_file *s,
struct generic_pm_domain *genpd)
PM / Domains: add debugfs listing of struct generic_pm_domain-s Add /sys/kernel/debug/pm_genpd/pm_genpd_summary file, which lists power domains in the system, their statuses and attached devices, resembling /sys/kernel/debug/clk/clk_summary. Currently it is impossible to inspect (from userland) whether a power domain is on or off. And, if it is on, which device blocks it from powering down. This change allows developers working on embedded devices power efficiency to list all necessary information about generic power domains in one place. The content of pm_genpd/pm_genpd_summary file is generated by iterating over all generic power domain in the system, and, for each, over registered devices and over the subdomains, if present. Example output: $ cat /sys/kernel/debug/pm_genpd/pm_genpd_summary domain status slaves /device runtime status ---------------------------------------------------------------------- a4su off a3sg off a3sm on a3sp on /devices/e6600000.pwm suspended /devices/e6c50000.serial active /devices/e6850000.sd suspended /devices/e6bd0000.mmc active a4s on a3sp, a3sm, a3sg /devices/e6900000.irqpin unsupported /devices/e6900004.irqpin unsupported /devices/e6900008.irqpin unsupported /devices/e690000c.irqpin unsupported /devices/e9a00000.ethernet active a3rv off a4r off a3rv /devices/fff20000.i2c suspended a4lc off c5 on a4lc, a4r, a4s, a4su /devices/e6050000.pfc unsupported /devices/e6138000.timer active To enable this feature, compile the kernel with debugfs and CONFIG_PM_ADVANCED_DEBUG enabled. Signed-off-by: Maciej Matraszek <m.matraszek@samsung.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-15 05:09:10 -06:00
{
static const char * const status_lookup[] = {
[GPD_STATE_ACTIVE] = "on",
[GPD_STATE_POWER_OFF] = "off"
};
struct pm_domain_data *pm_data;
const char *kobj_path;
struct gpd_link *link;
int ret;
ret = mutex_lock_interruptible(&genpd->lock);
PM / Domains: add debugfs listing of struct generic_pm_domain-s Add /sys/kernel/debug/pm_genpd/pm_genpd_summary file, which lists power domains in the system, their statuses and attached devices, resembling /sys/kernel/debug/clk/clk_summary. Currently it is impossible to inspect (from userland) whether a power domain is on or off. And, if it is on, which device blocks it from powering down. This change allows developers working on embedded devices power efficiency to list all necessary information about generic power domains in one place. The content of pm_genpd/pm_genpd_summary file is generated by iterating over all generic power domain in the system, and, for each, over registered devices and over the subdomains, if present. Example output: $ cat /sys/kernel/debug/pm_genpd/pm_genpd_summary domain status slaves /device runtime status ---------------------------------------------------------------------- a4su off a3sg off a3sm on a3sp on /devices/e6600000.pwm suspended /devices/e6c50000.serial active /devices/e6850000.sd suspended /devices/e6bd0000.mmc active a4s on a3sp, a3sm, a3sg /devices/e6900000.irqpin unsupported /devices/e6900004.irqpin unsupported /devices/e6900008.irqpin unsupported /devices/e690000c.irqpin unsupported /devices/e9a00000.ethernet active a3rv off a4r off a3rv /devices/fff20000.i2c suspended a4lc off c5 on a4lc, a4r, a4s, a4su /devices/e6050000.pfc unsupported /devices/e6138000.timer active To enable this feature, compile the kernel with debugfs and CONFIG_PM_ADVANCED_DEBUG enabled. Signed-off-by: Maciej Matraszek <m.matraszek@samsung.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-15 05:09:10 -06:00
if (ret)
return -ERESTARTSYS;
if (WARN_ON(genpd->status >= ARRAY_SIZE(status_lookup)))
PM / Domains: add debugfs listing of struct generic_pm_domain-s Add /sys/kernel/debug/pm_genpd/pm_genpd_summary file, which lists power domains in the system, their statuses and attached devices, resembling /sys/kernel/debug/clk/clk_summary. Currently it is impossible to inspect (from userland) whether a power domain is on or off. And, if it is on, which device blocks it from powering down. This change allows developers working on embedded devices power efficiency to list all necessary information about generic power domains in one place. The content of pm_genpd/pm_genpd_summary file is generated by iterating over all generic power domain in the system, and, for each, over registered devices and over the subdomains, if present. Example output: $ cat /sys/kernel/debug/pm_genpd/pm_genpd_summary domain status slaves /device runtime status ---------------------------------------------------------------------- a4su off a3sg off a3sm on a3sp on /devices/e6600000.pwm suspended /devices/e6c50000.serial active /devices/e6850000.sd suspended /devices/e6bd0000.mmc active a4s on a3sp, a3sm, a3sg /devices/e6900000.irqpin unsupported /devices/e6900004.irqpin unsupported /devices/e6900008.irqpin unsupported /devices/e690000c.irqpin unsupported /devices/e9a00000.ethernet active a3rv off a4r off a3rv /devices/fff20000.i2c suspended a4lc off c5 on a4lc, a4r, a4s, a4su /devices/e6050000.pfc unsupported /devices/e6138000.timer active To enable this feature, compile the kernel with debugfs and CONFIG_PM_ADVANCED_DEBUG enabled. Signed-off-by: Maciej Matraszek <m.matraszek@samsung.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-15 05:09:10 -06:00
goto exit;
seq_printf(s, "%-30s %-15s ", genpd->name, status_lookup[genpd->status]);
PM / Domains: add debugfs listing of struct generic_pm_domain-s Add /sys/kernel/debug/pm_genpd/pm_genpd_summary file, which lists power domains in the system, their statuses and attached devices, resembling /sys/kernel/debug/clk/clk_summary. Currently it is impossible to inspect (from userland) whether a power domain is on or off. And, if it is on, which device blocks it from powering down. This change allows developers working on embedded devices power efficiency to list all necessary information about generic power domains in one place. The content of pm_genpd/pm_genpd_summary file is generated by iterating over all generic power domain in the system, and, for each, over registered devices and over the subdomains, if present. Example output: $ cat /sys/kernel/debug/pm_genpd/pm_genpd_summary domain status slaves /device runtime status ---------------------------------------------------------------------- a4su off a3sg off a3sm on a3sp on /devices/e6600000.pwm suspended /devices/e6c50000.serial active /devices/e6850000.sd suspended /devices/e6bd0000.mmc active a4s on a3sp, a3sm, a3sg /devices/e6900000.irqpin unsupported /devices/e6900004.irqpin unsupported /devices/e6900008.irqpin unsupported /devices/e690000c.irqpin unsupported /devices/e9a00000.ethernet active a3rv off a4r off a3rv /devices/fff20000.i2c suspended a4lc off c5 on a4lc, a4r, a4s, a4su /devices/e6050000.pfc unsupported /devices/e6138000.timer active To enable this feature, compile the kernel with debugfs and CONFIG_PM_ADVANCED_DEBUG enabled. Signed-off-by: Maciej Matraszek <m.matraszek@samsung.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-15 05:09:10 -06:00
/*
* Modifications on the list require holding locks on both
* master and slave, so we are safe.
* Also genpd->name is immutable.
PM / Domains: add debugfs listing of struct generic_pm_domain-s Add /sys/kernel/debug/pm_genpd/pm_genpd_summary file, which lists power domains in the system, their statuses and attached devices, resembling /sys/kernel/debug/clk/clk_summary. Currently it is impossible to inspect (from userland) whether a power domain is on or off. And, if it is on, which device blocks it from powering down. This change allows developers working on embedded devices power efficiency to list all necessary information about generic power domains in one place. The content of pm_genpd/pm_genpd_summary file is generated by iterating over all generic power domain in the system, and, for each, over registered devices and over the subdomains, if present. Example output: $ cat /sys/kernel/debug/pm_genpd/pm_genpd_summary domain status slaves /device runtime status ---------------------------------------------------------------------- a4su off a3sg off a3sm on a3sp on /devices/e6600000.pwm suspended /devices/e6c50000.serial active /devices/e6850000.sd suspended /devices/e6bd0000.mmc active a4s on a3sp, a3sm, a3sg /devices/e6900000.irqpin unsupported /devices/e6900004.irqpin unsupported /devices/e6900008.irqpin unsupported /devices/e690000c.irqpin unsupported /devices/e9a00000.ethernet active a3rv off a4r off a3rv /devices/fff20000.i2c suspended a4lc off c5 on a4lc, a4r, a4s, a4su /devices/e6050000.pfc unsupported /devices/e6138000.timer active To enable this feature, compile the kernel with debugfs and CONFIG_PM_ADVANCED_DEBUG enabled. Signed-off-by: Maciej Matraszek <m.matraszek@samsung.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-15 05:09:10 -06:00
*/
list_for_each_entry(link, &genpd->master_links, master_node) {
PM / Domains: add debugfs listing of struct generic_pm_domain-s Add /sys/kernel/debug/pm_genpd/pm_genpd_summary file, which lists power domains in the system, their statuses and attached devices, resembling /sys/kernel/debug/clk/clk_summary. Currently it is impossible to inspect (from userland) whether a power domain is on or off. And, if it is on, which device blocks it from powering down. This change allows developers working on embedded devices power efficiency to list all necessary information about generic power domains in one place. The content of pm_genpd/pm_genpd_summary file is generated by iterating over all generic power domain in the system, and, for each, over registered devices and over the subdomains, if present. Example output: $ cat /sys/kernel/debug/pm_genpd/pm_genpd_summary domain status slaves /device runtime status ---------------------------------------------------------------------- a4su off a3sg off a3sm on a3sp on /devices/e6600000.pwm suspended /devices/e6c50000.serial active /devices/e6850000.sd suspended /devices/e6bd0000.mmc active a4s on a3sp, a3sm, a3sg /devices/e6900000.irqpin unsupported /devices/e6900004.irqpin unsupported /devices/e6900008.irqpin unsupported /devices/e690000c.irqpin unsupported /devices/e9a00000.ethernet active a3rv off a4r off a3rv /devices/fff20000.i2c suspended a4lc off c5 on a4lc, a4r, a4s, a4su /devices/e6050000.pfc unsupported /devices/e6138000.timer active To enable this feature, compile the kernel with debugfs and CONFIG_PM_ADVANCED_DEBUG enabled. Signed-off-by: Maciej Matraszek <m.matraszek@samsung.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-15 05:09:10 -06:00
seq_printf(s, "%s", link->slave->name);
if (!list_is_last(&link->master_node, &genpd->master_links))
PM / Domains: add debugfs listing of struct generic_pm_domain-s Add /sys/kernel/debug/pm_genpd/pm_genpd_summary file, which lists power domains in the system, their statuses and attached devices, resembling /sys/kernel/debug/clk/clk_summary. Currently it is impossible to inspect (from userland) whether a power domain is on or off. And, if it is on, which device blocks it from powering down. This change allows developers working on embedded devices power efficiency to list all necessary information about generic power domains in one place. The content of pm_genpd/pm_genpd_summary file is generated by iterating over all generic power domain in the system, and, for each, over registered devices and over the subdomains, if present. Example output: $ cat /sys/kernel/debug/pm_genpd/pm_genpd_summary domain status slaves /device runtime status ---------------------------------------------------------------------- a4su off a3sg off a3sm on a3sp on /devices/e6600000.pwm suspended /devices/e6c50000.serial active /devices/e6850000.sd suspended /devices/e6bd0000.mmc active a4s on a3sp, a3sm, a3sg /devices/e6900000.irqpin unsupported /devices/e6900004.irqpin unsupported /devices/e6900008.irqpin unsupported /devices/e690000c.irqpin unsupported /devices/e9a00000.ethernet active a3rv off a4r off a3rv /devices/fff20000.i2c suspended a4lc off c5 on a4lc, a4r, a4s, a4su /devices/e6050000.pfc unsupported /devices/e6138000.timer active To enable this feature, compile the kernel with debugfs and CONFIG_PM_ADVANCED_DEBUG enabled. Signed-off-by: Maciej Matraszek <m.matraszek@samsung.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-15 05:09:10 -06:00
seq_puts(s, ", ");
}
list_for_each_entry(pm_data, &genpd->dev_list, list_node) {
PM / Domains: add debugfs listing of struct generic_pm_domain-s Add /sys/kernel/debug/pm_genpd/pm_genpd_summary file, which lists power domains in the system, their statuses and attached devices, resembling /sys/kernel/debug/clk/clk_summary. Currently it is impossible to inspect (from userland) whether a power domain is on or off. And, if it is on, which device blocks it from powering down. This change allows developers working on embedded devices power efficiency to list all necessary information about generic power domains in one place. The content of pm_genpd/pm_genpd_summary file is generated by iterating over all generic power domain in the system, and, for each, over registered devices and over the subdomains, if present. Example output: $ cat /sys/kernel/debug/pm_genpd/pm_genpd_summary domain status slaves /device runtime status ---------------------------------------------------------------------- a4su off a3sg off a3sm on a3sp on /devices/e6600000.pwm suspended /devices/e6c50000.serial active /devices/e6850000.sd suspended /devices/e6bd0000.mmc active a4s on a3sp, a3sm, a3sg /devices/e6900000.irqpin unsupported /devices/e6900004.irqpin unsupported /devices/e6900008.irqpin unsupported /devices/e690000c.irqpin unsupported /devices/e9a00000.ethernet active a3rv off a4r off a3rv /devices/fff20000.i2c suspended a4lc off c5 on a4lc, a4r, a4s, a4su /devices/e6050000.pfc unsupported /devices/e6138000.timer active To enable this feature, compile the kernel with debugfs and CONFIG_PM_ADVANCED_DEBUG enabled. Signed-off-by: Maciej Matraszek <m.matraszek@samsung.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-15 05:09:10 -06:00
kobj_path = kobject_get_path(&pm_data->dev->kobj, GFP_KERNEL);
if (kobj_path == NULL)
continue;
seq_printf(s, "\n %-50s ", kobj_path);
rtpm_status_str(s, pm_data->dev);
kfree(kobj_path);
}
seq_puts(s, "\n");
exit:
mutex_unlock(&genpd->lock);
PM / Domains: add debugfs listing of struct generic_pm_domain-s Add /sys/kernel/debug/pm_genpd/pm_genpd_summary file, which lists power domains in the system, their statuses and attached devices, resembling /sys/kernel/debug/clk/clk_summary. Currently it is impossible to inspect (from userland) whether a power domain is on or off. And, if it is on, which device blocks it from powering down. This change allows developers working on embedded devices power efficiency to list all necessary information about generic power domains in one place. The content of pm_genpd/pm_genpd_summary file is generated by iterating over all generic power domain in the system, and, for each, over registered devices and over the subdomains, if present. Example output: $ cat /sys/kernel/debug/pm_genpd/pm_genpd_summary domain status slaves /device runtime status ---------------------------------------------------------------------- a4su off a3sg off a3sm on a3sp on /devices/e6600000.pwm suspended /devices/e6c50000.serial active /devices/e6850000.sd suspended /devices/e6bd0000.mmc active a4s on a3sp, a3sm, a3sg /devices/e6900000.irqpin unsupported /devices/e6900004.irqpin unsupported /devices/e6900008.irqpin unsupported /devices/e690000c.irqpin unsupported /devices/e9a00000.ethernet active a3rv off a4r off a3rv /devices/fff20000.i2c suspended a4lc off c5 on a4lc, a4r, a4s, a4su /devices/e6050000.pfc unsupported /devices/e6138000.timer active To enable this feature, compile the kernel with debugfs and CONFIG_PM_ADVANCED_DEBUG enabled. Signed-off-by: Maciej Matraszek <m.matraszek@samsung.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-15 05:09:10 -06:00
return 0;
}
static int pm_genpd_summary_show(struct seq_file *s, void *data)
{
struct generic_pm_domain *genpd;
PM / Domains: add debugfs listing of struct generic_pm_domain-s Add /sys/kernel/debug/pm_genpd/pm_genpd_summary file, which lists power domains in the system, their statuses and attached devices, resembling /sys/kernel/debug/clk/clk_summary. Currently it is impossible to inspect (from userland) whether a power domain is on or off. And, if it is on, which device blocks it from powering down. This change allows developers working on embedded devices power efficiency to list all necessary information about generic power domains in one place. The content of pm_genpd/pm_genpd_summary file is generated by iterating over all generic power domain in the system, and, for each, over registered devices and over the subdomains, if present. Example output: $ cat /sys/kernel/debug/pm_genpd/pm_genpd_summary domain status slaves /device runtime status ---------------------------------------------------------------------- a4su off a3sg off a3sm on a3sp on /devices/e6600000.pwm suspended /devices/e6c50000.serial active /devices/e6850000.sd suspended /devices/e6bd0000.mmc active a4s on a3sp, a3sm, a3sg /devices/e6900000.irqpin unsupported /devices/e6900004.irqpin unsupported /devices/e6900008.irqpin unsupported /devices/e690000c.irqpin unsupported /devices/e9a00000.ethernet active a3rv off a4r off a3rv /devices/fff20000.i2c suspended a4lc off c5 on a4lc, a4r, a4s, a4su /devices/e6050000.pfc unsupported /devices/e6138000.timer active To enable this feature, compile the kernel with debugfs and CONFIG_PM_ADVANCED_DEBUG enabled. Signed-off-by: Maciej Matraszek <m.matraszek@samsung.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-15 05:09:10 -06:00
int ret = 0;
seq_puts(s, "domain status slaves\n");
seq_puts(s, " /device runtime status\n");
PM / Domains: add debugfs listing of struct generic_pm_domain-s Add /sys/kernel/debug/pm_genpd/pm_genpd_summary file, which lists power domains in the system, their statuses and attached devices, resembling /sys/kernel/debug/clk/clk_summary. Currently it is impossible to inspect (from userland) whether a power domain is on or off. And, if it is on, which device blocks it from powering down. This change allows developers working on embedded devices power efficiency to list all necessary information about generic power domains in one place. The content of pm_genpd/pm_genpd_summary file is generated by iterating over all generic power domain in the system, and, for each, over registered devices and over the subdomains, if present. Example output: $ cat /sys/kernel/debug/pm_genpd/pm_genpd_summary domain status slaves /device runtime status ---------------------------------------------------------------------- a4su off a3sg off a3sm on a3sp on /devices/e6600000.pwm suspended /devices/e6c50000.serial active /devices/e6850000.sd suspended /devices/e6bd0000.mmc active a4s on a3sp, a3sm, a3sg /devices/e6900000.irqpin unsupported /devices/e6900004.irqpin unsupported /devices/e6900008.irqpin unsupported /devices/e690000c.irqpin unsupported /devices/e9a00000.ethernet active a3rv off a4r off a3rv /devices/fff20000.i2c suspended a4lc off c5 on a4lc, a4r, a4s, a4su /devices/e6050000.pfc unsupported /devices/e6138000.timer active To enable this feature, compile the kernel with debugfs and CONFIG_PM_ADVANCED_DEBUG enabled. Signed-off-by: Maciej Matraszek <m.matraszek@samsung.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-15 05:09:10 -06:00
seq_puts(s, "----------------------------------------------------------------------\n");
ret = mutex_lock_interruptible(&gpd_list_lock);
if (ret)
return -ERESTARTSYS;
list_for_each_entry(genpd, &gpd_list, gpd_list_node) {
ret = pm_genpd_summary_one(s, genpd);
PM / Domains: add debugfs listing of struct generic_pm_domain-s Add /sys/kernel/debug/pm_genpd/pm_genpd_summary file, which lists power domains in the system, their statuses and attached devices, resembling /sys/kernel/debug/clk/clk_summary. Currently it is impossible to inspect (from userland) whether a power domain is on or off. And, if it is on, which device blocks it from powering down. This change allows developers working on embedded devices power efficiency to list all necessary information about generic power domains in one place. The content of pm_genpd/pm_genpd_summary file is generated by iterating over all generic power domain in the system, and, for each, over registered devices and over the subdomains, if present. Example output: $ cat /sys/kernel/debug/pm_genpd/pm_genpd_summary domain status slaves /device runtime status ---------------------------------------------------------------------- a4su off a3sg off a3sm on a3sp on /devices/e6600000.pwm suspended /devices/e6c50000.serial active /devices/e6850000.sd suspended /devices/e6bd0000.mmc active a4s on a3sp, a3sm, a3sg /devices/e6900000.irqpin unsupported /devices/e6900004.irqpin unsupported /devices/e6900008.irqpin unsupported /devices/e690000c.irqpin unsupported /devices/e9a00000.ethernet active a3rv off a4r off a3rv /devices/fff20000.i2c suspended a4lc off c5 on a4lc, a4r, a4s, a4su /devices/e6050000.pfc unsupported /devices/e6138000.timer active To enable this feature, compile the kernel with debugfs and CONFIG_PM_ADVANCED_DEBUG enabled. Signed-off-by: Maciej Matraszek <m.matraszek@samsung.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-15 05:09:10 -06:00
if (ret)
break;
}
mutex_unlock(&gpd_list_lock);
return ret;
}
static int pm_genpd_summary_open(struct inode *inode, struct file *file)
{
return single_open(file, pm_genpd_summary_show, NULL);
}
static const struct file_operations pm_genpd_summary_fops = {
.open = pm_genpd_summary_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static int __init pm_genpd_debug_init(void)
{
struct dentry *d;
pm_genpd_debugfs_dir = debugfs_create_dir("pm_genpd", NULL);
if (!pm_genpd_debugfs_dir)
return -ENOMEM;
d = debugfs_create_file("pm_genpd_summary", S_IRUGO,
pm_genpd_debugfs_dir, NULL, &pm_genpd_summary_fops);
if (!d)
return -ENOMEM;
return 0;
}
late_initcall(pm_genpd_debug_init);
static void __exit pm_genpd_debug_exit(void)
{
debugfs_remove_recursive(pm_genpd_debugfs_dir);
}
__exitcall(pm_genpd_debug_exit);
#endif /* CONFIG_PM_ADVANCED_DEBUG */