1
0
Fork 0
alistair23-linux/security/keys/keyctl.c

1902 lines
47 KiB
C
Raw Normal View History

/* Userspace key control operations
*
[PATCH] Keys: Make request-key create an authorisation key The attached patch makes the following changes: (1) There's a new special key type called ".request_key_auth". This is an authorisation key for when one process requests a key and another process is started to construct it. This type of key cannot be created by the user; nor can it be requested by kernel services. Authorisation keys hold two references: (a) Each refers to a key being constructed. When the key being constructed is instantiated the authorisation key is revoked, rendering it of no further use. (b) The "authorising process". This is either: (i) the process that called request_key(), or: (ii) if the process that called request_key() itself had an authorisation key in its session keyring, then the authorising process referred to by that authorisation key will also be referred to by the new authorisation key. This means that the process that initiated a chain of key requests will authorise the lot of them, and will, by default, wind up with the keys obtained from them in its keyrings. (2) request_key() creates an authorisation key which is then passed to /sbin/request-key in as part of a new session keyring. (3) When request_key() is searching for a key to hand back to the caller, if it comes across an authorisation key in the session keyring of the calling process, it will also search the keyrings of the process specified therein and it will use the specified process's credentials (fsuid, fsgid, groups) to do that rather than the calling process's credentials. This allows a process started by /sbin/request-key to find keys belonging to the authorising process. (4) A key can be read, even if the process executing KEYCTL_READ doesn't have direct read or search permission if that key is contained within the keyrings of a process specified by an authorisation key found within the calling process's session keyring, and is searchable using the credentials of the authorising process. This allows a process started by /sbin/request-key to read keys belonging to the authorising process. (5) The magic KEY_SPEC_*_KEYRING key IDs when passed to KEYCTL_INSTANTIATE or KEYCTL_NEGATE will specify a keyring of the authorising process, rather than the process doing the instantiation. (6) One of the process keyrings can be nominated as the default to which request_key() should attach new keys if not otherwise specified. This is done with KEYCTL_SET_REQKEY_KEYRING and one of the KEY_REQKEY_DEFL_* constants. The current setting can also be read using this call. (7) request_key() is partially interruptible. If it is waiting for another process to finish constructing a key, it can be interrupted. This permits a request-key cycle to be broken without recourse to rebooting. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-Off-By: Benoit Boissinot <benoit.boissinot@ens-lyon.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 23:00:56 -06:00
* Copyright (C) 2004-5 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/sched/task.h>
#include <linux/slab.h>
#include <linux/syscalls.h>
#include <linux/key.h>
#include <linux/keyctl.h>
#include <linux/fs.h>
#include <linux/capability.h>
#include <linux/cred.h>
#include <linux/string.h>
#include <linux/err.h>
#include <linux/vmalloc.h>
#include <linux/security.h>
#include <linux/uio.h>
#include <linux/uaccess.h>
#include <keys/request_key_auth-type.h>
#include "internal.h"
#define KEY_MAX_DESC_SIZE 4096
static const unsigned char keyrings_capabilities[2] = {
[0] = (KEYCTL_CAPS0_CAPABILITIES |
(IS_ENABLED(CONFIG_PERSISTENT_KEYRINGS) ? KEYCTL_CAPS0_PERSISTENT_KEYRINGS : 0) |
(IS_ENABLED(CONFIG_KEY_DH_OPERATIONS) ? KEYCTL_CAPS0_DIFFIE_HELLMAN : 0) |
(IS_ENABLED(CONFIG_ASYMMETRIC_KEY_TYPE) ? KEYCTL_CAPS0_PUBLIC_KEY : 0) |
(IS_ENABLED(CONFIG_BIG_KEYS) ? KEYCTL_CAPS0_BIG_KEY : 0) |
KEYCTL_CAPS0_INVALIDATE |
KEYCTL_CAPS0_RESTRICT_KEYRING |
KEYCTL_CAPS0_MOVE
),
[1] = (KEYCTL_CAPS1_NS_KEYRING_NAME |
KEYCTL_CAPS1_NS_KEY_TAG),
};
static int key_get_type_from_user(char *type,
const char __user *_type,
unsigned len)
{
int ret;
ret = strncpy_from_user(type, _type, len);
if (ret < 0)
return ret;
if (ret == 0 || ret >= len)
return -EINVAL;
if (type[0] == '.')
return -EPERM;
type[len - 1] = '\0';
return 0;
}
/*
* Extract the description of a new key from userspace and either add it as a
* new key to the specified keyring or update a matching key in that keyring.
*
KEYS: Add payload preparsing opportunity prior to key instantiate or update Give the key type the opportunity to preparse the payload prior to the instantiation and update routines being called. This is done with the provision of two new key type operations: int (*preparse)(struct key_preparsed_payload *prep); void (*free_preparse)(struct key_preparsed_payload *prep); If the first operation is present, then it is called before key creation (in the add/update case) or before the key semaphore is taken (in the update and instantiate cases). The second operation is called to clean up if the first was called. preparse() is given the opportunity to fill in the following structure: struct key_preparsed_payload { char *description; void *type_data[2]; void *payload; const void *data; size_t datalen; size_t quotalen; }; Before the preparser is called, the first three fields will have been cleared, the payload pointer and size will be stored in data and datalen and the default quota size from the key_type struct will be stored into quotalen. The preparser may parse the payload in any way it likes and may store data in the type_data[] and payload fields for use by the instantiate() and update() ops. The preparser may also propose a description for the key by attaching it as a string to the description field. This can be used by passing a NULL or "" description to the add_key() system call or the key_create_or_update() function. This cannot work with request_key() as that required the description to tell the upcall about the key to be created. This, for example permits keys that store PGP public keys to generate their own name from the user ID and public key fingerprint in the key. The instantiate() and update() operations are then modified to look like this: int (*instantiate)(struct key *key, struct key_preparsed_payload *prep); int (*update)(struct key *key, struct key_preparsed_payload *prep); and the new payload data is passed in *prep, whether or not it was preparsed. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-13 06:06:29 -06:00
* If the description is NULL or an empty string, the key type is asked to
* generate one from the payload.
*
* The keyring must be writable so that we can attach the key to it.
*
* If successful, the new key's serial number is returned, otherwise an error
* code is returned.
*/
SYSCALL_DEFINE5(add_key, const char __user *, _type,
const char __user *, _description,
const void __user *, _payload,
size_t, plen,
key_serial_t, ringid)
{
key_ref_t keyring_ref, key_ref;
char type[32], *description;
void *payload;
long ret;
ret = -EINVAL;
if (plen > 1024 * 1024 - 1)
goto error;
/* draw all the data into kernel space */
ret = key_get_type_from_user(type, _type, sizeof(type));
if (ret < 0)
goto error;
KEYS: Add payload preparsing opportunity prior to key instantiate or update Give the key type the opportunity to preparse the payload prior to the instantiation and update routines being called. This is done with the provision of two new key type operations: int (*preparse)(struct key_preparsed_payload *prep); void (*free_preparse)(struct key_preparsed_payload *prep); If the first operation is present, then it is called before key creation (in the add/update case) or before the key semaphore is taken (in the update and instantiate cases). The second operation is called to clean up if the first was called. preparse() is given the opportunity to fill in the following structure: struct key_preparsed_payload { char *description; void *type_data[2]; void *payload; const void *data; size_t datalen; size_t quotalen; }; Before the preparser is called, the first three fields will have been cleared, the payload pointer and size will be stored in data and datalen and the default quota size from the key_type struct will be stored into quotalen. The preparser may parse the payload in any way it likes and may store data in the type_data[] and payload fields for use by the instantiate() and update() ops. The preparser may also propose a description for the key by attaching it as a string to the description field. This can be used by passing a NULL or "" description to the add_key() system call or the key_create_or_update() function. This cannot work with request_key() as that required the description to tell the upcall about the key to be created. This, for example permits keys that store PGP public keys to generate their own name from the user ID and public key fingerprint in the key. The instantiate() and update() operations are then modified to look like this: int (*instantiate)(struct key *key, struct key_preparsed_payload *prep); int (*update)(struct key *key, struct key_preparsed_payload *prep); and the new payload data is passed in *prep, whether or not it was preparsed. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-13 06:06:29 -06:00
description = NULL;
if (_description) {
description = strndup_user(_description, KEY_MAX_DESC_SIZE);
KEYS: Add payload preparsing opportunity prior to key instantiate or update Give the key type the opportunity to preparse the payload prior to the instantiation and update routines being called. This is done with the provision of two new key type operations: int (*preparse)(struct key_preparsed_payload *prep); void (*free_preparse)(struct key_preparsed_payload *prep); If the first operation is present, then it is called before key creation (in the add/update case) or before the key semaphore is taken (in the update and instantiate cases). The second operation is called to clean up if the first was called. preparse() is given the opportunity to fill in the following structure: struct key_preparsed_payload { char *description; void *type_data[2]; void *payload; const void *data; size_t datalen; size_t quotalen; }; Before the preparser is called, the first three fields will have been cleared, the payload pointer and size will be stored in data and datalen and the default quota size from the key_type struct will be stored into quotalen. The preparser may parse the payload in any way it likes and may store data in the type_data[] and payload fields for use by the instantiate() and update() ops. The preparser may also propose a description for the key by attaching it as a string to the description field. This can be used by passing a NULL or "" description to the add_key() system call or the key_create_or_update() function. This cannot work with request_key() as that required the description to tell the upcall about the key to be created. This, for example permits keys that store PGP public keys to generate their own name from the user ID and public key fingerprint in the key. The instantiate() and update() operations are then modified to look like this: int (*instantiate)(struct key *key, struct key_preparsed_payload *prep); int (*update)(struct key *key, struct key_preparsed_payload *prep); and the new payload data is passed in *prep, whether or not it was preparsed. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-13 06:06:29 -06:00
if (IS_ERR(description)) {
ret = PTR_ERR(description);
goto error;
}
if (!*description) {
kfree(description);
description = NULL;
} else if ((description[0] == '.') &&
(strncmp(type, "keyring", 7) == 0)) {
ret = -EPERM;
goto error2;
KEYS: Add payload preparsing opportunity prior to key instantiate or update Give the key type the opportunity to preparse the payload prior to the instantiation and update routines being called. This is done with the provision of two new key type operations: int (*preparse)(struct key_preparsed_payload *prep); void (*free_preparse)(struct key_preparsed_payload *prep); If the first operation is present, then it is called before key creation (in the add/update case) or before the key semaphore is taken (in the update and instantiate cases). The second operation is called to clean up if the first was called. preparse() is given the opportunity to fill in the following structure: struct key_preparsed_payload { char *description; void *type_data[2]; void *payload; const void *data; size_t datalen; size_t quotalen; }; Before the preparser is called, the first three fields will have been cleared, the payload pointer and size will be stored in data and datalen and the default quota size from the key_type struct will be stored into quotalen. The preparser may parse the payload in any way it likes and may store data in the type_data[] and payload fields for use by the instantiate() and update() ops. The preparser may also propose a description for the key by attaching it as a string to the description field. This can be used by passing a NULL or "" description to the add_key() system call or the key_create_or_update() function. This cannot work with request_key() as that required the description to tell the upcall about the key to be created. This, for example permits keys that store PGP public keys to generate their own name from the user ID and public key fingerprint in the key. The instantiate() and update() operations are then modified to look like this: int (*instantiate)(struct key *key, struct key_preparsed_payload *prep); int (*update)(struct key *key, struct key_preparsed_payload *prep); and the new payload data is passed in *prep, whether or not it was preparsed. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-13 06:06:29 -06:00
}
}
/* pull the payload in if one was supplied */
payload = NULL;
if (plen) {
ret = -ENOMEM;
treewide: use kv[mz]alloc* rather than opencoded variants There are many code paths opencoding kvmalloc. Let's use the helper instead. The main difference to kvmalloc is that those users are usually not considering all the aspects of the memory allocator. E.g. allocation requests <= 32kB (with 4kB pages) are basically never failing and invoke OOM killer to satisfy the allocation. This sounds too disruptive for something that has a reasonable fallback - the vmalloc. On the other hand those requests might fallback to vmalloc even when the memory allocator would succeed after several more reclaim/compaction attempts previously. There is no guarantee something like that happens though. This patch converts many of those places to kv[mz]alloc* helpers because they are more conservative. Link: http://lkml.kernel.org/r/20170306103327.2766-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> # Xen bits Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Andreas Dilger <andreas.dilger@intel.com> # Lustre Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> # KVM/s390 Acked-by: Dan Williams <dan.j.williams@intel.com> # nvdim Acked-by: David Sterba <dsterba@suse.com> # btrfs Acked-by: Ilya Dryomov <idryomov@gmail.com> # Ceph Acked-by: Tariq Toukan <tariqt@mellanox.com> # mlx4 Acked-by: Leon Romanovsky <leonro@mellanox.com> # mlx5 Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Tony Luck <tony.luck@intel.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Santosh Raspatur <santosh@chelsio.com> Cc: Hariprasad S <hariprasad@chelsio.com> Cc: Yishai Hadas <yishaih@mellanox.com> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: "Yan, Zheng" <zyan@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-08 16:57:27 -06:00
payload = kvmalloc(plen, GFP_KERNEL);
if (!payload)
goto error2;
ret = -EFAULT;
if (copy_from_user(payload, _payload, plen) != 0)
goto error3;
}
/* find the target keyring (which must be writable) */
keyring_ref = lookup_user_key(ringid, KEY_LOOKUP_CREATE, KEY_NEED_WRITE);
if (IS_ERR(keyring_ref)) {
ret = PTR_ERR(keyring_ref);
goto error3;
}
/* create or update the requested key and add it to the target
* keyring */
key_ref = key_create_or_update(keyring_ref, type, description,
keys: Replace uid/gid/perm permissions checking with an ACL Replace the uid/gid/perm permissions checking on a key with an ACL to allow the SETATTR and SEARCH permissions to be split. This will also allow a greater range of subjects to represented. ============ WHY DO THIS? ============ The problem is that SETATTR and SEARCH cover a slew of actions, not all of which should be grouped together. For SETATTR, this includes actions that are about controlling access to a key: (1) Changing a key's ownership. (2) Changing a key's security information. (3) Setting a keyring's restriction. And actions that are about managing a key's lifetime: (4) Setting an expiry time. (5) Revoking a key. and (proposed) managing a key as part of a cache: (6) Invalidating a key. Managing a key's lifetime doesn't really have anything to do with controlling access to that key. Expiry time is awkward since it's more about the lifetime of the content and so, in some ways goes better with WRITE permission. It can, however, be set unconditionally by a process with an appropriate authorisation token for instantiating a key, and can also be set by the key type driver when a key is instantiated, so lumping it with the access-controlling actions is probably okay. As for SEARCH permission, that currently covers: (1) Finding keys in a keyring tree during a search. (2) Permitting keyrings to be joined. (3) Invalidation. But these don't really belong together either, since these actions really need to be controlled separately. Finally, there are number of special cases to do with granting the administrator special rights to invalidate or clear keys that I would like to handle with the ACL rather than key flags and special checks. =============== WHAT IS CHANGED =============== The SETATTR permission is split to create two new permissions: (1) SET_SECURITY - which allows the key's owner, group and ACL to be changed and a restriction to be placed on a keyring. (2) REVOKE - which allows a key to be revoked. The SEARCH permission is split to create: (1) SEARCH - which allows a keyring to be search and a key to be found. (2) JOIN - which allows a keyring to be joined as a session keyring. (3) INVAL - which allows a key to be invalidated. The WRITE permission is also split to create: (1) WRITE - which allows a key's content to be altered and links to be added, removed and replaced in a keyring. (2) CLEAR - which allows a keyring to be cleared completely. This is split out to make it possible to give just this to an administrator. (3) REVOKE - see above. Keys acquire ACLs which consist of a series of ACEs, and all that apply are unioned together. An ACE specifies a subject, such as: (*) Possessor - permitted to anyone who 'possesses' a key (*) Owner - permitted to the key owner (*) Group - permitted to the key group (*) Everyone - permitted to everyone Note that 'Other' has been replaced with 'Everyone' on the assumption that you wouldn't grant a permit to 'Other' that you wouldn't also grant to everyone else. Further subjects may be made available by later patches. The ACE also specifies a permissions mask. The set of permissions is now: VIEW Can view the key metadata READ Can read the key content WRITE Can update/modify the key content SEARCH Can find the key by searching/requesting LINK Can make a link to the key SET_SECURITY Can change owner, ACL, expiry INVAL Can invalidate REVOKE Can revoke JOIN Can join this keyring CLEAR Can clear this keyring The KEYCTL_SETPERM function is then deprecated. The KEYCTL_SET_TIMEOUT function then is permitted if SET_SECURITY is set, or if the caller has a valid instantiation auth token. The KEYCTL_INVALIDATE function then requires INVAL. The KEYCTL_REVOKE function then requires REVOKE. The KEYCTL_JOIN_SESSION_KEYRING function then requires JOIN to join an existing keyring. The JOIN permission is enabled by default for session keyrings and manually created keyrings only. ====================== BACKWARD COMPATIBILITY ====================== To maintain backward compatibility, KEYCTL_SETPERM will translate the permissions mask it is given into a new ACL for a key - unless KEYCTL_SET_ACL has been called on that key, in which case an error will be returned. It will convert possessor, owner, group and other permissions into separate ACEs, if each portion of the mask is non-zero. SETATTR permission turns on all of INVAL, REVOKE and SET_SECURITY. WRITE permission turns on WRITE, REVOKE and, if a keyring, CLEAR. JOIN is turned on if a keyring is being altered. The KEYCTL_DESCRIBE function translates the ACL back into a permissions mask to return depending on possessor, owner, group and everyone ACEs. It will make the following mappings: (1) INVAL, JOIN -> SEARCH (2) SET_SECURITY -> SETATTR (3) REVOKE -> WRITE if SETATTR isn't already set (4) CLEAR -> WRITE Note that the value subsequently returned by KEYCTL_DESCRIBE may not match the value set with KEYCTL_SETATTR. ======= TESTING ======= This passes the keyutils testsuite for all but a couple of tests: (1) tests/keyctl/dh_compute/badargs: The first wrong-key-type test now returns EOPNOTSUPP rather than ENOKEY as READ permission isn't removed if the type doesn't have ->read(). You still can't actually read the key. (2) tests/keyctl/permitting/valid: The view-other-permissions test doesn't work as Other has been replaced with Everyone in the ACL. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-27 16:03:07 -06:00
payload, plen, NULL, KEY_ALLOC_IN_QUOTA);
if (!IS_ERR(key_ref)) {
ret = key_ref_to_ptr(key_ref)->serial;
key_ref_put(key_ref);
}
else {
ret = PTR_ERR(key_ref);
}
key_ref_put(keyring_ref);
error3:
if (payload) {
memzero_explicit(payload, plen);
kvfree(payload);
}
error2:
kfree(description);
error:
return ret;
}
/*
* Search the process keyrings and keyring trees linked from those for a
* matching key. Keyrings must have appropriate Search permission to be
* searched.
*
* If a key is found, it will be attached to the destination keyring if there's
* one specified and the serial number of the key will be returned.
*
* If no key is found, /sbin/request-key will be invoked if _callout_info is
* non-NULL in an attempt to create a key. The _callout_info string will be
* passed to /sbin/request-key to aid with completing the request. If the
* _callout_info string is "" then it will be changed to "-".
*/
SYSCALL_DEFINE4(request_key, const char __user *, _type,
const char __user *, _description,
const char __user *, _callout_info,
key_serial_t, destringid)
{
struct key_type *ktype;
struct key *key;
key_ref_t dest_ref;
size_t callout_len;
char type[32], *description, *callout_info;
long ret;
/* pull the type into kernel space */
ret = key_get_type_from_user(type, _type, sizeof(type));
if (ret < 0)
goto error;
/* pull the description into kernel space */
description = strndup_user(_description, KEY_MAX_DESC_SIZE);
if (IS_ERR(description)) {
ret = PTR_ERR(description);
goto error;
}
/* pull the callout info into kernel space */
callout_info = NULL;
callout_len = 0;
if (_callout_info) {
callout_info = strndup_user(_callout_info, PAGE_SIZE);
if (IS_ERR(callout_info)) {
ret = PTR_ERR(callout_info);
goto error2;
}
callout_len = strlen(callout_info);
}
/* get the destination keyring if specified */
dest_ref = NULL;
if (destringid) {
dest_ref = lookup_user_key(destringid, KEY_LOOKUP_CREATE,
KEY_NEED_WRITE);
if (IS_ERR(dest_ref)) {
ret = PTR_ERR(dest_ref);
goto error3;
}
}
/* find the key type */
ktype = key_type_lookup(type);
if (IS_ERR(ktype)) {
ret = PTR_ERR(ktype);
goto error4;
}
/* do the search */
key = request_key_and_link(ktype, description, NULL, callout_info,
keys: Replace uid/gid/perm permissions checking with an ACL Replace the uid/gid/perm permissions checking on a key with an ACL to allow the SETATTR and SEARCH permissions to be split. This will also allow a greater range of subjects to represented. ============ WHY DO THIS? ============ The problem is that SETATTR and SEARCH cover a slew of actions, not all of which should be grouped together. For SETATTR, this includes actions that are about controlling access to a key: (1) Changing a key's ownership. (2) Changing a key's security information. (3) Setting a keyring's restriction. And actions that are about managing a key's lifetime: (4) Setting an expiry time. (5) Revoking a key. and (proposed) managing a key as part of a cache: (6) Invalidating a key. Managing a key's lifetime doesn't really have anything to do with controlling access to that key. Expiry time is awkward since it's more about the lifetime of the content and so, in some ways goes better with WRITE permission. It can, however, be set unconditionally by a process with an appropriate authorisation token for instantiating a key, and can also be set by the key type driver when a key is instantiated, so lumping it with the access-controlling actions is probably okay. As for SEARCH permission, that currently covers: (1) Finding keys in a keyring tree during a search. (2) Permitting keyrings to be joined. (3) Invalidation. But these don't really belong together either, since these actions really need to be controlled separately. Finally, there are number of special cases to do with granting the administrator special rights to invalidate or clear keys that I would like to handle with the ACL rather than key flags and special checks. =============== WHAT IS CHANGED =============== The SETATTR permission is split to create two new permissions: (1) SET_SECURITY - which allows the key's owner, group and ACL to be changed and a restriction to be placed on a keyring. (2) REVOKE - which allows a key to be revoked. The SEARCH permission is split to create: (1) SEARCH - which allows a keyring to be search and a key to be found. (2) JOIN - which allows a keyring to be joined as a session keyring. (3) INVAL - which allows a key to be invalidated. The WRITE permission is also split to create: (1) WRITE - which allows a key's content to be altered and links to be added, removed and replaced in a keyring. (2) CLEAR - which allows a keyring to be cleared completely. This is split out to make it possible to give just this to an administrator. (3) REVOKE - see above. Keys acquire ACLs which consist of a series of ACEs, and all that apply are unioned together. An ACE specifies a subject, such as: (*) Possessor - permitted to anyone who 'possesses' a key (*) Owner - permitted to the key owner (*) Group - permitted to the key group (*) Everyone - permitted to everyone Note that 'Other' has been replaced with 'Everyone' on the assumption that you wouldn't grant a permit to 'Other' that you wouldn't also grant to everyone else. Further subjects may be made available by later patches. The ACE also specifies a permissions mask. The set of permissions is now: VIEW Can view the key metadata READ Can read the key content WRITE Can update/modify the key content SEARCH Can find the key by searching/requesting LINK Can make a link to the key SET_SECURITY Can change owner, ACL, expiry INVAL Can invalidate REVOKE Can revoke JOIN Can join this keyring CLEAR Can clear this keyring The KEYCTL_SETPERM function is then deprecated. The KEYCTL_SET_TIMEOUT function then is permitted if SET_SECURITY is set, or if the caller has a valid instantiation auth token. The KEYCTL_INVALIDATE function then requires INVAL. The KEYCTL_REVOKE function then requires REVOKE. The KEYCTL_JOIN_SESSION_KEYRING function then requires JOIN to join an existing keyring. The JOIN permission is enabled by default for session keyrings and manually created keyrings only. ====================== BACKWARD COMPATIBILITY ====================== To maintain backward compatibility, KEYCTL_SETPERM will translate the permissions mask it is given into a new ACL for a key - unless KEYCTL_SET_ACL has been called on that key, in which case an error will be returned. It will convert possessor, owner, group and other permissions into separate ACEs, if each portion of the mask is non-zero. SETATTR permission turns on all of INVAL, REVOKE and SET_SECURITY. WRITE permission turns on WRITE, REVOKE and, if a keyring, CLEAR. JOIN is turned on if a keyring is being altered. The KEYCTL_DESCRIBE function translates the ACL back into a permissions mask to return depending on possessor, owner, group and everyone ACEs. It will make the following mappings: (1) INVAL, JOIN -> SEARCH (2) SET_SECURITY -> SETATTR (3) REVOKE -> WRITE if SETATTR isn't already set (4) CLEAR -> WRITE Note that the value subsequently returned by KEYCTL_DESCRIBE may not match the value set with KEYCTL_SETATTR. ======= TESTING ======= This passes the keyutils testsuite for all but a couple of tests: (1) tests/keyctl/dh_compute/badargs: The first wrong-key-type test now returns EOPNOTSUPP rather than ENOKEY as READ permission isn't removed if the type doesn't have ->read(). You still can't actually read the key. (2) tests/keyctl/permitting/valid: The view-other-permissions test doesn't work as Other has been replaced with Everyone in the ACL. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-27 16:03:07 -06:00
callout_len, NULL, NULL,
key_ref_to_ptr(dest_ref),
KEY_ALLOC_IN_QUOTA);
if (IS_ERR(key)) {
ret = PTR_ERR(key);
goto error5;
}
/* wait for the key to finish being constructed */
ret = wait_for_key_construction(key, 1);
if (ret < 0)
goto error6;
ret = key->serial;
error6:
[PATCH] Keys: Make request-key create an authorisation key The attached patch makes the following changes: (1) There's a new special key type called ".request_key_auth". This is an authorisation key for when one process requests a key and another process is started to construct it. This type of key cannot be created by the user; nor can it be requested by kernel services. Authorisation keys hold two references: (a) Each refers to a key being constructed. When the key being constructed is instantiated the authorisation key is revoked, rendering it of no further use. (b) The "authorising process". This is either: (i) the process that called request_key(), or: (ii) if the process that called request_key() itself had an authorisation key in its session keyring, then the authorising process referred to by that authorisation key will also be referred to by the new authorisation key. This means that the process that initiated a chain of key requests will authorise the lot of them, and will, by default, wind up with the keys obtained from them in its keyrings. (2) request_key() creates an authorisation key which is then passed to /sbin/request-key in as part of a new session keyring. (3) When request_key() is searching for a key to hand back to the caller, if it comes across an authorisation key in the session keyring of the calling process, it will also search the keyrings of the process specified therein and it will use the specified process's credentials (fsuid, fsgid, groups) to do that rather than the calling process's credentials. This allows a process started by /sbin/request-key to find keys belonging to the authorising process. (4) A key can be read, even if the process executing KEYCTL_READ doesn't have direct read or search permission if that key is contained within the keyrings of a process specified by an authorisation key found within the calling process's session keyring, and is searchable using the credentials of the authorising process. This allows a process started by /sbin/request-key to read keys belonging to the authorising process. (5) The magic KEY_SPEC_*_KEYRING key IDs when passed to KEYCTL_INSTANTIATE or KEYCTL_NEGATE will specify a keyring of the authorising process, rather than the process doing the instantiation. (6) One of the process keyrings can be nominated as the default to which request_key() should attach new keys if not otherwise specified. This is done with KEYCTL_SET_REQKEY_KEYRING and one of the KEY_REQKEY_DEFL_* constants. The current setting can also be read using this call. (7) request_key() is partially interruptible. If it is waiting for another process to finish constructing a key, it can be interrupted. This permits a request-key cycle to be broken without recourse to rebooting. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-Off-By: Benoit Boissinot <benoit.boissinot@ens-lyon.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 23:00:56 -06:00
key_put(key);
error5:
key_type_put(ktype);
error4:
key_ref_put(dest_ref);
error3:
kfree(callout_info);
error2:
kfree(description);
error:
return ret;
}
/*
* Get the ID of the specified process keyring.
*
* The requested keyring must have search permission to be found.
*
* If successful, the ID of the requested keyring will be returned.
*/
long keyctl_get_keyring_ID(key_serial_t id, int create)
{
key_ref_t key_ref;
unsigned long lflags;
long ret;
lflags = create ? KEY_LOOKUP_CREATE : 0;
key_ref = lookup_user_key(id, lflags, KEY_NEED_SEARCH);
if (IS_ERR(key_ref)) {
ret = PTR_ERR(key_ref);
goto error;
}
ret = key_ref_to_ptr(key_ref)->serial;
key_ref_put(key_ref);
error:
return ret;
}
/*
* Join a (named) session keyring.
*
* Create and join an anonymous session keyring or join a named session
* keyring, creating it if necessary. A named session keyring must have Search
* permission for it to be joined. Session keyrings without this permit will
* be skipped over. It is not permitted for userspace to create or join
* keyrings whose name begin with a dot.
*
* If successful, the ID of the joined session keyring will be returned.
*/
long keyctl_join_session_keyring(const char __user *_name)
{
char *name;
long ret;
/* fetch the name from userspace */
name = NULL;
if (_name) {
name = strndup_user(_name, KEY_MAX_DESC_SIZE);
if (IS_ERR(name)) {
ret = PTR_ERR(name);
goto error;
}
ret = -EPERM;
if (name[0] == '.')
goto error_name;
}
/* join the session */
ret = join_session_keyring(name);
error_name:
kfree(name);
error:
return ret;
}
/*
* Update a key's data payload from the given data.
*
* The key must grant the caller Write permission and the key type must support
* updating for this to work. A negative key can be positively instantiated
* with this call.
*
* If successful, 0 will be returned. If the key type does not support
* updating, then -EOPNOTSUPP will be returned.
*/
long keyctl_update_key(key_serial_t id,
const void __user *_payload,
size_t plen)
{
key_ref_t key_ref;
void *payload;
long ret;
ret = -EINVAL;
if (plen > PAGE_SIZE)
goto error;
/* pull the payload in if one was supplied */
payload = NULL;
if (plen) {
ret = -ENOMEM;
payload = kmalloc(plen, GFP_KERNEL);
if (!payload)
goto error;
ret = -EFAULT;
if (copy_from_user(payload, _payload, plen) != 0)
goto error2;
}
/* find the target key (which must be writable) */
key_ref = lookup_user_key(id, 0, KEY_NEED_WRITE);
if (IS_ERR(key_ref)) {
ret = PTR_ERR(key_ref);
goto error2;
}
/* update the key */
ret = key_update(key_ref, payload, plen);
key_ref_put(key_ref);
error2:
kzfree(payload);
error:
return ret;
}
/*
* Revoke a key.
*
* The key must be grant the caller Write or Setattr permission for this to
* work. The key type should give up its quota claim when revoked. The key
* and any links to the key will be automatically garbage collected after a
* certain amount of time (/proc/sys/kernel/keys/gc_delay).
*
* Keys with KEY_FLAG_KEEP set should not be revoked.
*
* If successful, 0 is returned.
*/
long keyctl_revoke_key(key_serial_t id)
{
key_ref_t key_ref;
struct key *key;
long ret;
keys: Replace uid/gid/perm permissions checking with an ACL Replace the uid/gid/perm permissions checking on a key with an ACL to allow the SETATTR and SEARCH permissions to be split. This will also allow a greater range of subjects to represented. ============ WHY DO THIS? ============ The problem is that SETATTR and SEARCH cover a slew of actions, not all of which should be grouped together. For SETATTR, this includes actions that are about controlling access to a key: (1) Changing a key's ownership. (2) Changing a key's security information. (3) Setting a keyring's restriction. And actions that are about managing a key's lifetime: (4) Setting an expiry time. (5) Revoking a key. and (proposed) managing a key as part of a cache: (6) Invalidating a key. Managing a key's lifetime doesn't really have anything to do with controlling access to that key. Expiry time is awkward since it's more about the lifetime of the content and so, in some ways goes better with WRITE permission. It can, however, be set unconditionally by a process with an appropriate authorisation token for instantiating a key, and can also be set by the key type driver when a key is instantiated, so lumping it with the access-controlling actions is probably okay. As for SEARCH permission, that currently covers: (1) Finding keys in a keyring tree during a search. (2) Permitting keyrings to be joined. (3) Invalidation. But these don't really belong together either, since these actions really need to be controlled separately. Finally, there are number of special cases to do with granting the administrator special rights to invalidate or clear keys that I would like to handle with the ACL rather than key flags and special checks. =============== WHAT IS CHANGED =============== The SETATTR permission is split to create two new permissions: (1) SET_SECURITY - which allows the key's owner, group and ACL to be changed and a restriction to be placed on a keyring. (2) REVOKE - which allows a key to be revoked. The SEARCH permission is split to create: (1) SEARCH - which allows a keyring to be search and a key to be found. (2) JOIN - which allows a keyring to be joined as a session keyring. (3) INVAL - which allows a key to be invalidated. The WRITE permission is also split to create: (1) WRITE - which allows a key's content to be altered and links to be added, removed and replaced in a keyring. (2) CLEAR - which allows a keyring to be cleared completely. This is split out to make it possible to give just this to an administrator. (3) REVOKE - see above. Keys acquire ACLs which consist of a series of ACEs, and all that apply are unioned together. An ACE specifies a subject, such as: (*) Possessor - permitted to anyone who 'possesses' a key (*) Owner - permitted to the key owner (*) Group - permitted to the key group (*) Everyone - permitted to everyone Note that 'Other' has been replaced with 'Everyone' on the assumption that you wouldn't grant a permit to 'Other' that you wouldn't also grant to everyone else. Further subjects may be made available by later patches. The ACE also specifies a permissions mask. The set of permissions is now: VIEW Can view the key metadata READ Can read the key content WRITE Can update/modify the key content SEARCH Can find the key by searching/requesting LINK Can make a link to the key SET_SECURITY Can change owner, ACL, expiry INVAL Can invalidate REVOKE Can revoke JOIN Can join this keyring CLEAR Can clear this keyring The KEYCTL_SETPERM function is then deprecated. The KEYCTL_SET_TIMEOUT function then is permitted if SET_SECURITY is set, or if the caller has a valid instantiation auth token. The KEYCTL_INVALIDATE function then requires INVAL. The KEYCTL_REVOKE function then requires REVOKE. The KEYCTL_JOIN_SESSION_KEYRING function then requires JOIN to join an existing keyring. The JOIN permission is enabled by default for session keyrings and manually created keyrings only. ====================== BACKWARD COMPATIBILITY ====================== To maintain backward compatibility, KEYCTL_SETPERM will translate the permissions mask it is given into a new ACL for a key - unless KEYCTL_SET_ACL has been called on that key, in which case an error will be returned. It will convert possessor, owner, group and other permissions into separate ACEs, if each portion of the mask is non-zero. SETATTR permission turns on all of INVAL, REVOKE and SET_SECURITY. WRITE permission turns on WRITE, REVOKE and, if a keyring, CLEAR. JOIN is turned on if a keyring is being altered. The KEYCTL_DESCRIBE function translates the ACL back into a permissions mask to return depending on possessor, owner, group and everyone ACEs. It will make the following mappings: (1) INVAL, JOIN -> SEARCH (2) SET_SECURITY -> SETATTR (3) REVOKE -> WRITE if SETATTR isn't already set (4) CLEAR -> WRITE Note that the value subsequently returned by KEYCTL_DESCRIBE may not match the value set with KEYCTL_SETATTR. ======= TESTING ======= This passes the keyutils testsuite for all but a couple of tests: (1) tests/keyctl/dh_compute/badargs: The first wrong-key-type test now returns EOPNOTSUPP rather than ENOKEY as READ permission isn't removed if the type doesn't have ->read(). You still can't actually read the key. (2) tests/keyctl/permitting/valid: The view-other-permissions test doesn't work as Other has been replaced with Everyone in the ACL. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-27 16:03:07 -06:00
key_ref = lookup_user_key(id, 0, KEY_NEED_REVOKE);
if (IS_ERR(key_ref)) {
ret = PTR_ERR(key_ref);
keys: Replace uid/gid/perm permissions checking with an ACL Replace the uid/gid/perm permissions checking on a key with an ACL to allow the SETATTR and SEARCH permissions to be split. This will also allow a greater range of subjects to represented. ============ WHY DO THIS? ============ The problem is that SETATTR and SEARCH cover a slew of actions, not all of which should be grouped together. For SETATTR, this includes actions that are about controlling access to a key: (1) Changing a key's ownership. (2) Changing a key's security information. (3) Setting a keyring's restriction. And actions that are about managing a key's lifetime: (4) Setting an expiry time. (5) Revoking a key. and (proposed) managing a key as part of a cache: (6) Invalidating a key. Managing a key's lifetime doesn't really have anything to do with controlling access to that key. Expiry time is awkward since it's more about the lifetime of the content and so, in some ways goes better with WRITE permission. It can, however, be set unconditionally by a process with an appropriate authorisation token for instantiating a key, and can also be set by the key type driver when a key is instantiated, so lumping it with the access-controlling actions is probably okay. As for SEARCH permission, that currently covers: (1) Finding keys in a keyring tree during a search. (2) Permitting keyrings to be joined. (3) Invalidation. But these don't really belong together either, since these actions really need to be controlled separately. Finally, there are number of special cases to do with granting the administrator special rights to invalidate or clear keys that I would like to handle with the ACL rather than key flags and special checks. =============== WHAT IS CHANGED =============== The SETATTR permission is split to create two new permissions: (1) SET_SECURITY - which allows the key's owner, group and ACL to be changed and a restriction to be placed on a keyring. (2) REVOKE - which allows a key to be revoked. The SEARCH permission is split to create: (1) SEARCH - which allows a keyring to be search and a key to be found. (2) JOIN - which allows a keyring to be joined as a session keyring. (3) INVAL - which allows a key to be invalidated. The WRITE permission is also split to create: (1) WRITE - which allows a key's content to be altered and links to be added, removed and replaced in a keyring. (2) CLEAR - which allows a keyring to be cleared completely. This is split out to make it possible to give just this to an administrator. (3) REVOKE - see above. Keys acquire ACLs which consist of a series of ACEs, and all that apply are unioned together. An ACE specifies a subject, such as: (*) Possessor - permitted to anyone who 'possesses' a key (*) Owner - permitted to the key owner (*) Group - permitted to the key group (*) Everyone - permitted to everyone Note that 'Other' has been replaced with 'Everyone' on the assumption that you wouldn't grant a permit to 'Other' that you wouldn't also grant to everyone else. Further subjects may be made available by later patches. The ACE also specifies a permissions mask. The set of permissions is now: VIEW Can view the key metadata READ Can read the key content WRITE Can update/modify the key content SEARCH Can find the key by searching/requesting LINK Can make a link to the key SET_SECURITY Can change owner, ACL, expiry INVAL Can invalidate REVOKE Can revoke JOIN Can join this keyring CLEAR Can clear this keyring The KEYCTL_SETPERM function is then deprecated. The KEYCTL_SET_TIMEOUT function then is permitted if SET_SECURITY is set, or if the caller has a valid instantiation auth token. The KEYCTL_INVALIDATE function then requires INVAL. The KEYCTL_REVOKE function then requires REVOKE. The KEYCTL_JOIN_SESSION_KEYRING function then requires JOIN to join an existing keyring. The JOIN permission is enabled by default for session keyrings and manually created keyrings only. ====================== BACKWARD COMPATIBILITY ====================== To maintain backward compatibility, KEYCTL_SETPERM will translate the permissions mask it is given into a new ACL for a key - unless KEYCTL_SET_ACL has been called on that key, in which case an error will be returned. It will convert possessor, owner, group and other permissions into separate ACEs, if each portion of the mask is non-zero. SETATTR permission turns on all of INVAL, REVOKE and SET_SECURITY. WRITE permission turns on WRITE, REVOKE and, if a keyring, CLEAR. JOIN is turned on if a keyring is being altered. The KEYCTL_DESCRIBE function translates the ACL back into a permissions mask to return depending on possessor, owner, group and everyone ACEs. It will make the following mappings: (1) INVAL, JOIN -> SEARCH (2) SET_SECURITY -> SETATTR (3) REVOKE -> WRITE if SETATTR isn't already set (4) CLEAR -> WRITE Note that the value subsequently returned by KEYCTL_DESCRIBE may not match the value set with KEYCTL_SETATTR. ======= TESTING ======= This passes the keyutils testsuite for all but a couple of tests: (1) tests/keyctl/dh_compute/badargs: The first wrong-key-type test now returns EOPNOTSUPP rather than ENOKEY as READ permission isn't removed if the type doesn't have ->read(). You still can't actually read the key. (2) tests/keyctl/permitting/valid: The view-other-permissions test doesn't work as Other has been replaced with Everyone in the ACL. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-27 16:03:07 -06:00
goto error;
}
key = key_ref_to_ptr(key_ref);
ret = 0;
if (test_bit(KEY_FLAG_KEEP, &key->flags))
ret = -EPERM;
else
key_revoke(key);
key_ref_put(key_ref);
error:
return ret;
}
/*
* Invalidate a key.
*
* The key must be grant the caller Invalidate permission for this to work.
* The key and any links to the key will be automatically garbage collected
* immediately.
*
* Keys with KEY_FLAG_KEEP set should not be invalidated.
*
* If successful, 0 is returned.
*/
long keyctl_invalidate_key(key_serial_t id)
{
key_ref_t key_ref;
struct key *key;
long ret;
kenter("%d", id);
keys: Replace uid/gid/perm permissions checking with an ACL Replace the uid/gid/perm permissions checking on a key with an ACL to allow the SETATTR and SEARCH permissions to be split. This will also allow a greater range of subjects to represented. ============ WHY DO THIS? ============ The problem is that SETATTR and SEARCH cover a slew of actions, not all of which should be grouped together. For SETATTR, this includes actions that are about controlling access to a key: (1) Changing a key's ownership. (2) Changing a key's security information. (3) Setting a keyring's restriction. And actions that are about managing a key's lifetime: (4) Setting an expiry time. (5) Revoking a key. and (proposed) managing a key as part of a cache: (6) Invalidating a key. Managing a key's lifetime doesn't really have anything to do with controlling access to that key. Expiry time is awkward since it's more about the lifetime of the content and so, in some ways goes better with WRITE permission. It can, however, be set unconditionally by a process with an appropriate authorisation token for instantiating a key, and can also be set by the key type driver when a key is instantiated, so lumping it with the access-controlling actions is probably okay. As for SEARCH permission, that currently covers: (1) Finding keys in a keyring tree during a search. (2) Permitting keyrings to be joined. (3) Invalidation. But these don't really belong together either, since these actions really need to be controlled separately. Finally, there are number of special cases to do with granting the administrator special rights to invalidate or clear keys that I would like to handle with the ACL rather than key flags and special checks. =============== WHAT IS CHANGED =============== The SETATTR permission is split to create two new permissions: (1) SET_SECURITY - which allows the key's owner, group and ACL to be changed and a restriction to be placed on a keyring. (2) REVOKE - which allows a key to be revoked. The SEARCH permission is split to create: (1) SEARCH - which allows a keyring to be search and a key to be found. (2) JOIN - which allows a keyring to be joined as a session keyring. (3) INVAL - which allows a key to be invalidated. The WRITE permission is also split to create: (1) WRITE - which allows a key's content to be altered and links to be added, removed and replaced in a keyring. (2) CLEAR - which allows a keyring to be cleared completely. This is split out to make it possible to give just this to an administrator. (3) REVOKE - see above. Keys acquire ACLs which consist of a series of ACEs, and all that apply are unioned together. An ACE specifies a subject, such as: (*) Possessor - permitted to anyone who 'possesses' a key (*) Owner - permitted to the key owner (*) Group - permitted to the key group (*) Everyone - permitted to everyone Note that 'Other' has been replaced with 'Everyone' on the assumption that you wouldn't grant a permit to 'Other' that you wouldn't also grant to everyone else. Further subjects may be made available by later patches. The ACE also specifies a permissions mask. The set of permissions is now: VIEW Can view the key metadata READ Can read the key content WRITE Can update/modify the key content SEARCH Can find the key by searching/requesting LINK Can make a link to the key SET_SECURITY Can change owner, ACL, expiry INVAL Can invalidate REVOKE Can revoke JOIN Can join this keyring CLEAR Can clear this keyring The KEYCTL_SETPERM function is then deprecated. The KEYCTL_SET_TIMEOUT function then is permitted if SET_SECURITY is set, or if the caller has a valid instantiation auth token. The KEYCTL_INVALIDATE function then requires INVAL. The KEYCTL_REVOKE function then requires REVOKE. The KEYCTL_JOIN_SESSION_KEYRING function then requires JOIN to join an existing keyring. The JOIN permission is enabled by default for session keyrings and manually created keyrings only. ====================== BACKWARD COMPATIBILITY ====================== To maintain backward compatibility, KEYCTL_SETPERM will translate the permissions mask it is given into a new ACL for a key - unless KEYCTL_SET_ACL has been called on that key, in which case an error will be returned. It will convert possessor, owner, group and other permissions into separate ACEs, if each portion of the mask is non-zero. SETATTR permission turns on all of INVAL, REVOKE and SET_SECURITY. WRITE permission turns on WRITE, REVOKE and, if a keyring, CLEAR. JOIN is turned on if a keyring is being altered. The KEYCTL_DESCRIBE function translates the ACL back into a permissions mask to return depending on possessor, owner, group and everyone ACEs. It will make the following mappings: (1) INVAL, JOIN -> SEARCH (2) SET_SECURITY -> SETATTR (3) REVOKE -> WRITE if SETATTR isn't already set (4) CLEAR -> WRITE Note that the value subsequently returned by KEYCTL_DESCRIBE may not match the value set with KEYCTL_SETATTR. ======= TESTING ======= This passes the keyutils testsuite for all but a couple of tests: (1) tests/keyctl/dh_compute/badargs: The first wrong-key-type test now returns EOPNOTSUPP rather than ENOKEY as READ permission isn't removed if the type doesn't have ->read(). You still can't actually read the key. (2) tests/keyctl/permitting/valid: The view-other-permissions test doesn't work as Other has been replaced with Everyone in the ACL. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-27 16:03:07 -06:00
key_ref = lookup_user_key(id, 0, KEY_NEED_INVAL);
if (IS_ERR(key_ref)) {
ret = PTR_ERR(key_ref);
/* Root is permitted to invalidate certain special keys */
if (capable(CAP_SYS_ADMIN)) {
key_ref = lookup_user_key(id, 0, 0);
if (IS_ERR(key_ref))
goto error;
if (test_bit(KEY_FLAG_ROOT_CAN_INVAL,
&key_ref_to_ptr(key_ref)->flags))
goto invalidate;
goto error_put;
}
goto error;
}
invalidate:
key = key_ref_to_ptr(key_ref);
ret = 0;
if (test_bit(KEY_FLAG_KEEP, &key->flags))
ret = -EPERM;
else
key_invalidate(key);
error_put:
key_ref_put(key_ref);
error:
kleave(" = %ld", ret);
return ret;
}
/*
* Clear the specified keyring, creating an empty process keyring if one of the
* special keyring IDs is used.
*
* The keyring must grant the caller Write permission and not have
* KEY_FLAG_KEEP set for this to work. If successful, 0 will be returned.
*/
long keyctl_keyring_clear(key_serial_t ringid)
{
key_ref_t keyring_ref;
struct key *keyring;
long ret;
keys: Replace uid/gid/perm permissions checking with an ACL Replace the uid/gid/perm permissions checking on a key with an ACL to allow the SETATTR and SEARCH permissions to be split. This will also allow a greater range of subjects to represented. ============ WHY DO THIS? ============ The problem is that SETATTR and SEARCH cover a slew of actions, not all of which should be grouped together. For SETATTR, this includes actions that are about controlling access to a key: (1) Changing a key's ownership. (2) Changing a key's security information. (3) Setting a keyring's restriction. And actions that are about managing a key's lifetime: (4) Setting an expiry time. (5) Revoking a key. and (proposed) managing a key as part of a cache: (6) Invalidating a key. Managing a key's lifetime doesn't really have anything to do with controlling access to that key. Expiry time is awkward since it's more about the lifetime of the content and so, in some ways goes better with WRITE permission. It can, however, be set unconditionally by a process with an appropriate authorisation token for instantiating a key, and can also be set by the key type driver when a key is instantiated, so lumping it with the access-controlling actions is probably okay. As for SEARCH permission, that currently covers: (1) Finding keys in a keyring tree during a search. (2) Permitting keyrings to be joined. (3) Invalidation. But these don't really belong together either, since these actions really need to be controlled separately. Finally, there are number of special cases to do with granting the administrator special rights to invalidate or clear keys that I would like to handle with the ACL rather than key flags and special checks. =============== WHAT IS CHANGED =============== The SETATTR permission is split to create two new permissions: (1) SET_SECURITY - which allows the key's owner, group and ACL to be changed and a restriction to be placed on a keyring. (2) REVOKE - which allows a key to be revoked. The SEARCH permission is split to create: (1) SEARCH - which allows a keyring to be search and a key to be found. (2) JOIN - which allows a keyring to be joined as a session keyring. (3) INVAL - which allows a key to be invalidated. The WRITE permission is also split to create: (1) WRITE - which allows a key's content to be altered and links to be added, removed and replaced in a keyring. (2) CLEAR - which allows a keyring to be cleared completely. This is split out to make it possible to give just this to an administrator. (3) REVOKE - see above. Keys acquire ACLs which consist of a series of ACEs, and all that apply are unioned together. An ACE specifies a subject, such as: (*) Possessor - permitted to anyone who 'possesses' a key (*) Owner - permitted to the key owner (*) Group - permitted to the key group (*) Everyone - permitted to everyone Note that 'Other' has been replaced with 'Everyone' on the assumption that you wouldn't grant a permit to 'Other' that you wouldn't also grant to everyone else. Further subjects may be made available by later patches. The ACE also specifies a permissions mask. The set of permissions is now: VIEW Can view the key metadata READ Can read the key content WRITE Can update/modify the key content SEARCH Can find the key by searching/requesting LINK Can make a link to the key SET_SECURITY Can change owner, ACL, expiry INVAL Can invalidate REVOKE Can revoke JOIN Can join this keyring CLEAR Can clear this keyring The KEYCTL_SETPERM function is then deprecated. The KEYCTL_SET_TIMEOUT function then is permitted if SET_SECURITY is set, or if the caller has a valid instantiation auth token. The KEYCTL_INVALIDATE function then requires INVAL. The KEYCTL_REVOKE function then requires REVOKE. The KEYCTL_JOIN_SESSION_KEYRING function then requires JOIN to join an existing keyring. The JOIN permission is enabled by default for session keyrings and manually created keyrings only. ====================== BACKWARD COMPATIBILITY ====================== To maintain backward compatibility, KEYCTL_SETPERM will translate the permissions mask it is given into a new ACL for a key - unless KEYCTL_SET_ACL has been called on that key, in which case an error will be returned. It will convert possessor, owner, group and other permissions into separate ACEs, if each portion of the mask is non-zero. SETATTR permission turns on all of INVAL, REVOKE and SET_SECURITY. WRITE permission turns on WRITE, REVOKE and, if a keyring, CLEAR. JOIN is turned on if a keyring is being altered. The KEYCTL_DESCRIBE function translates the ACL back into a permissions mask to return depending on possessor, owner, group and everyone ACEs. It will make the following mappings: (1) INVAL, JOIN -> SEARCH (2) SET_SECURITY -> SETATTR (3) REVOKE -> WRITE if SETATTR isn't already set (4) CLEAR -> WRITE Note that the value subsequently returned by KEYCTL_DESCRIBE may not match the value set with KEYCTL_SETATTR. ======= TESTING ======= This passes the keyutils testsuite for all but a couple of tests: (1) tests/keyctl/dh_compute/badargs: The first wrong-key-type test now returns EOPNOTSUPP rather than ENOKEY as READ permission isn't removed if the type doesn't have ->read(). You still can't actually read the key. (2) tests/keyctl/permitting/valid: The view-other-permissions test doesn't work as Other has been replaced with Everyone in the ACL. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-27 16:03:07 -06:00
keyring_ref = lookup_user_key(ringid, KEY_LOOKUP_CREATE, KEY_NEED_CLEAR);
if (IS_ERR(keyring_ref)) {
ret = PTR_ERR(keyring_ref);
/* Root is permitted to invalidate certain special keyrings */
if (capable(CAP_SYS_ADMIN)) {
keyring_ref = lookup_user_key(ringid, 0, 0);
if (IS_ERR(keyring_ref))
goto error;
if (test_bit(KEY_FLAG_ROOT_CAN_CLEAR,
&key_ref_to_ptr(keyring_ref)->flags))
goto clear;
goto error_put;
}
goto error;
}
clear:
keyring = key_ref_to_ptr(keyring_ref);
if (test_bit(KEY_FLAG_KEEP, &keyring->flags))
ret = -EPERM;
else
ret = keyring_clear(keyring);
error_put:
key_ref_put(keyring_ref);
error:
return ret;
}
/*
* Create a link from a keyring to a key if there's no matching key in the
* keyring, otherwise replace the link to the matching key with a link to the
* new key.
*
* The key must grant the caller Link permission and the the keyring must grant
* the caller Write permission. Furthermore, if an additional link is created,
* the keyring's quota will be extended.
*
* If successful, 0 will be returned.
*/
long keyctl_keyring_link(key_serial_t id, key_serial_t ringid)
{
key_ref_t keyring_ref, key_ref;
long ret;
keyring_ref = lookup_user_key(ringid, KEY_LOOKUP_CREATE, KEY_NEED_WRITE);
if (IS_ERR(keyring_ref)) {
ret = PTR_ERR(keyring_ref);
goto error;
}
key_ref = lookup_user_key(id, KEY_LOOKUP_CREATE, KEY_NEED_LINK);
if (IS_ERR(key_ref)) {
ret = PTR_ERR(key_ref);
goto error2;
}
ret = key_link(key_ref_to_ptr(keyring_ref), key_ref_to_ptr(key_ref));
key_ref_put(key_ref);
error2:
key_ref_put(keyring_ref);
error:
return ret;
}
/*
* Unlink a key from a keyring.
*
* The keyring must grant the caller Write permission for this to work; the key
* itself need not grant the caller anything. If the last link to a key is
* removed then that key will be scheduled for destruction.
*
* Keys or keyrings with KEY_FLAG_KEEP set should not be unlinked.
*
* If successful, 0 will be returned.
*/
long keyctl_keyring_unlink(key_serial_t id, key_serial_t ringid)
{
key_ref_t keyring_ref, key_ref;
struct key *keyring, *key;
long ret;
keyring_ref = lookup_user_key(ringid, 0, KEY_NEED_WRITE);
if (IS_ERR(keyring_ref)) {
ret = PTR_ERR(keyring_ref);
goto error;
}
key_ref = lookup_user_key(id, KEY_LOOKUP_FOR_UNLINK, 0);
if (IS_ERR(key_ref)) {
ret = PTR_ERR(key_ref);
goto error2;
}
keyring = key_ref_to_ptr(keyring_ref);
key = key_ref_to_ptr(key_ref);
if (test_bit(KEY_FLAG_KEEP, &keyring->flags) &&
test_bit(KEY_FLAG_KEEP, &key->flags))
ret = -EPERM;
else
ret = key_unlink(keyring, key);
key_ref_put(key_ref);
error2:
key_ref_put(keyring_ref);
error:
return ret;
}
/*
* Move a link to a key from one keyring to another, displacing any matching
* key from the destination keyring.
*
* The key must grant the caller Link permission and both keyrings must grant
* the caller Write permission. There must also be a link in the from keyring
* to the key. If both keyrings are the same, nothing is done.
*
* If successful, 0 will be returned.
*/
long keyctl_keyring_move(key_serial_t id, key_serial_t from_ringid,
key_serial_t to_ringid, unsigned int flags)
{
key_ref_t key_ref, from_ref, to_ref;
long ret;
if (flags & ~KEYCTL_MOVE_EXCL)
return -EINVAL;
key_ref = lookup_user_key(id, KEY_LOOKUP_CREATE, KEY_NEED_LINK);
if (IS_ERR(key_ref))
return PTR_ERR(key_ref);
from_ref = lookup_user_key(from_ringid, 0, KEY_NEED_WRITE);
if (IS_ERR(from_ref)) {
ret = PTR_ERR(from_ref);
goto error2;
}
to_ref = lookup_user_key(to_ringid, KEY_LOOKUP_CREATE, KEY_NEED_WRITE);
if (IS_ERR(to_ref)) {
ret = PTR_ERR(to_ref);
goto error3;
}
ret = key_move(key_ref_to_ptr(key_ref), key_ref_to_ptr(from_ref),
key_ref_to_ptr(to_ref), flags);
key_ref_put(to_ref);
error3:
key_ref_put(from_ref);
error2:
key_ref_put(key_ref);
return ret;
}
/*
* Return a description of a key to userspace.
*
* The key must grant the caller View permission for this to work.
*
* If there's a buffer, we place up to buflen bytes of data into it formatted
* in the following way:
*
* type;uid;gid;perm;description<NUL>
*
* If successful, we return the amount of description available, irrespective
* of how much we may have copied into the buffer.
*/
long keyctl_describe_key(key_serial_t keyid,
char __user *buffer,
size_t buflen)
{
[PATCH] Keys: Make request-key create an authorisation key The attached patch makes the following changes: (1) There's a new special key type called ".request_key_auth". This is an authorisation key for when one process requests a key and another process is started to construct it. This type of key cannot be created by the user; nor can it be requested by kernel services. Authorisation keys hold two references: (a) Each refers to a key being constructed. When the key being constructed is instantiated the authorisation key is revoked, rendering it of no further use. (b) The "authorising process". This is either: (i) the process that called request_key(), or: (ii) if the process that called request_key() itself had an authorisation key in its session keyring, then the authorising process referred to by that authorisation key will also be referred to by the new authorisation key. This means that the process that initiated a chain of key requests will authorise the lot of them, and will, by default, wind up with the keys obtained from them in its keyrings. (2) request_key() creates an authorisation key which is then passed to /sbin/request-key in as part of a new session keyring. (3) When request_key() is searching for a key to hand back to the caller, if it comes across an authorisation key in the session keyring of the calling process, it will also search the keyrings of the process specified therein and it will use the specified process's credentials (fsuid, fsgid, groups) to do that rather than the calling process's credentials. This allows a process started by /sbin/request-key to find keys belonging to the authorising process. (4) A key can be read, even if the process executing KEYCTL_READ doesn't have direct read or search permission if that key is contained within the keyrings of a process specified by an authorisation key found within the calling process's session keyring, and is searchable using the credentials of the authorising process. This allows a process started by /sbin/request-key to read keys belonging to the authorising process. (5) The magic KEY_SPEC_*_KEYRING key IDs when passed to KEYCTL_INSTANTIATE or KEYCTL_NEGATE will specify a keyring of the authorising process, rather than the process doing the instantiation. (6) One of the process keyrings can be nominated as the default to which request_key() should attach new keys if not otherwise specified. This is done with KEYCTL_SET_REQKEY_KEYRING and one of the KEY_REQKEY_DEFL_* constants. The current setting can also be read using this call. (7) request_key() is partially interruptible. If it is waiting for another process to finish constructing a key, it can be interrupted. This permits a request-key cycle to be broken without recourse to rebooting. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-Off-By: Benoit Boissinot <benoit.boissinot@ens-lyon.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 23:00:56 -06:00
struct key *key, *instkey;
keys: Replace uid/gid/perm permissions checking with an ACL Replace the uid/gid/perm permissions checking on a key with an ACL to allow the SETATTR and SEARCH permissions to be split. This will also allow a greater range of subjects to represented. ============ WHY DO THIS? ============ The problem is that SETATTR and SEARCH cover a slew of actions, not all of which should be grouped together. For SETATTR, this includes actions that are about controlling access to a key: (1) Changing a key's ownership. (2) Changing a key's security information. (3) Setting a keyring's restriction. And actions that are about managing a key's lifetime: (4) Setting an expiry time. (5) Revoking a key. and (proposed) managing a key as part of a cache: (6) Invalidating a key. Managing a key's lifetime doesn't really have anything to do with controlling access to that key. Expiry time is awkward since it's more about the lifetime of the content and so, in some ways goes better with WRITE permission. It can, however, be set unconditionally by a process with an appropriate authorisation token for instantiating a key, and can also be set by the key type driver when a key is instantiated, so lumping it with the access-controlling actions is probably okay. As for SEARCH permission, that currently covers: (1) Finding keys in a keyring tree during a search. (2) Permitting keyrings to be joined. (3) Invalidation. But these don't really belong together either, since these actions really need to be controlled separately. Finally, there are number of special cases to do with granting the administrator special rights to invalidate or clear keys that I would like to handle with the ACL rather than key flags and special checks. =============== WHAT IS CHANGED =============== The SETATTR permission is split to create two new permissions: (1) SET_SECURITY - which allows the key's owner, group and ACL to be changed and a restriction to be placed on a keyring. (2) REVOKE - which allows a key to be revoked. The SEARCH permission is split to create: (1) SEARCH - which allows a keyring to be search and a key to be found. (2) JOIN - which allows a keyring to be joined as a session keyring. (3) INVAL - which allows a key to be invalidated. The WRITE permission is also split to create: (1) WRITE - which allows a key's content to be altered and links to be added, removed and replaced in a keyring. (2) CLEAR - which allows a keyring to be cleared completely. This is split out to make it possible to give just this to an administrator. (3) REVOKE - see above. Keys acquire ACLs which consist of a series of ACEs, and all that apply are unioned together. An ACE specifies a subject, such as: (*) Possessor - permitted to anyone who 'possesses' a key (*) Owner - permitted to the key owner (*) Group - permitted to the key group (*) Everyone - permitted to everyone Note that 'Other' has been replaced with 'Everyone' on the assumption that you wouldn't grant a permit to 'Other' that you wouldn't also grant to everyone else. Further subjects may be made available by later patches. The ACE also specifies a permissions mask. The set of permissions is now: VIEW Can view the key metadata READ Can read the key content WRITE Can update/modify the key content SEARCH Can find the key by searching/requesting LINK Can make a link to the key SET_SECURITY Can change owner, ACL, expiry INVAL Can invalidate REVOKE Can revoke JOIN Can join this keyring CLEAR Can clear this keyring The KEYCTL_SETPERM function is then deprecated. The KEYCTL_SET_TIMEOUT function then is permitted if SET_SECURITY is set, or if the caller has a valid instantiation auth token. The KEYCTL_INVALIDATE function then requires INVAL. The KEYCTL_REVOKE function then requires REVOKE. The KEYCTL_JOIN_SESSION_KEYRING function then requires JOIN to join an existing keyring. The JOIN permission is enabled by default for session keyrings and manually created keyrings only. ====================== BACKWARD COMPATIBILITY ====================== To maintain backward compatibility, KEYCTL_SETPERM will translate the permissions mask it is given into a new ACL for a key - unless KEYCTL_SET_ACL has been called on that key, in which case an error will be returned. It will convert possessor, owner, group and other permissions into separate ACEs, if each portion of the mask is non-zero. SETATTR permission turns on all of INVAL, REVOKE and SET_SECURITY. WRITE permission turns on WRITE, REVOKE and, if a keyring, CLEAR. JOIN is turned on if a keyring is being altered. The KEYCTL_DESCRIBE function translates the ACL back into a permissions mask to return depending on possessor, owner, group and everyone ACEs. It will make the following mappings: (1) INVAL, JOIN -> SEARCH (2) SET_SECURITY -> SETATTR (3) REVOKE -> WRITE if SETATTR isn't already set (4) CLEAR -> WRITE Note that the value subsequently returned by KEYCTL_DESCRIBE may not match the value set with KEYCTL_SETATTR. ======= TESTING ======= This passes the keyutils testsuite for all but a couple of tests: (1) tests/keyctl/dh_compute/badargs: The first wrong-key-type test now returns EOPNOTSUPP rather than ENOKEY as READ permission isn't removed if the type doesn't have ->read(). You still can't actually read the key. (2) tests/keyctl/permitting/valid: The view-other-permissions test doesn't work as Other has been replaced with Everyone in the ACL. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-27 16:03:07 -06:00
unsigned int perm;
key_ref_t key_ref;
char *infobuf;
long ret;
int desclen, infolen;
key_ref = lookup_user_key(keyid, KEY_LOOKUP_PARTIAL, KEY_NEED_VIEW);
if (IS_ERR(key_ref)) {
[PATCH] Keys: Make request-key create an authorisation key The attached patch makes the following changes: (1) There's a new special key type called ".request_key_auth". This is an authorisation key for when one process requests a key and another process is started to construct it. This type of key cannot be created by the user; nor can it be requested by kernel services. Authorisation keys hold two references: (a) Each refers to a key being constructed. When the key being constructed is instantiated the authorisation key is revoked, rendering it of no further use. (b) The "authorising process". This is either: (i) the process that called request_key(), or: (ii) if the process that called request_key() itself had an authorisation key in its session keyring, then the authorising process referred to by that authorisation key will also be referred to by the new authorisation key. This means that the process that initiated a chain of key requests will authorise the lot of them, and will, by default, wind up with the keys obtained from them in its keyrings. (2) request_key() creates an authorisation key which is then passed to /sbin/request-key in as part of a new session keyring. (3) When request_key() is searching for a key to hand back to the caller, if it comes across an authorisation key in the session keyring of the calling process, it will also search the keyrings of the process specified therein and it will use the specified process's credentials (fsuid, fsgid, groups) to do that rather than the calling process's credentials. This allows a process started by /sbin/request-key to find keys belonging to the authorising process. (4) A key can be read, even if the process executing KEYCTL_READ doesn't have direct read or search permission if that key is contained within the keyrings of a process specified by an authorisation key found within the calling process's session keyring, and is searchable using the credentials of the authorising process. This allows a process started by /sbin/request-key to read keys belonging to the authorising process. (5) The magic KEY_SPEC_*_KEYRING key IDs when passed to KEYCTL_INSTANTIATE or KEYCTL_NEGATE will specify a keyring of the authorising process, rather than the process doing the instantiation. (6) One of the process keyrings can be nominated as the default to which request_key() should attach new keys if not otherwise specified. This is done with KEYCTL_SET_REQKEY_KEYRING and one of the KEY_REQKEY_DEFL_* constants. The current setting can also be read using this call. (7) request_key() is partially interruptible. If it is waiting for another process to finish constructing a key, it can be interrupted. This permits a request-key cycle to be broken without recourse to rebooting. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-Off-By: Benoit Boissinot <benoit.boissinot@ens-lyon.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 23:00:56 -06:00
/* viewing a key under construction is permitted if we have the
* authorisation token handy */
if (PTR_ERR(key_ref) == -EACCES) {
[PATCH] Keys: Make request-key create an authorisation key The attached patch makes the following changes: (1) There's a new special key type called ".request_key_auth". This is an authorisation key for when one process requests a key and another process is started to construct it. This type of key cannot be created by the user; nor can it be requested by kernel services. Authorisation keys hold two references: (a) Each refers to a key being constructed. When the key being constructed is instantiated the authorisation key is revoked, rendering it of no further use. (b) The "authorising process". This is either: (i) the process that called request_key(), or: (ii) if the process that called request_key() itself had an authorisation key in its session keyring, then the authorising process referred to by that authorisation key will also be referred to by the new authorisation key. This means that the process that initiated a chain of key requests will authorise the lot of them, and will, by default, wind up with the keys obtained from them in its keyrings. (2) request_key() creates an authorisation key which is then passed to /sbin/request-key in as part of a new session keyring. (3) When request_key() is searching for a key to hand back to the caller, if it comes across an authorisation key in the session keyring of the calling process, it will also search the keyrings of the process specified therein and it will use the specified process's credentials (fsuid, fsgid, groups) to do that rather than the calling process's credentials. This allows a process started by /sbin/request-key to find keys belonging to the authorising process. (4) A key can be read, even if the process executing KEYCTL_READ doesn't have direct read or search permission if that key is contained within the keyrings of a process specified by an authorisation key found within the calling process's session keyring, and is searchable using the credentials of the authorising process. This allows a process started by /sbin/request-key to read keys belonging to the authorising process. (5) The magic KEY_SPEC_*_KEYRING key IDs when passed to KEYCTL_INSTANTIATE or KEYCTL_NEGATE will specify a keyring of the authorising process, rather than the process doing the instantiation. (6) One of the process keyrings can be nominated as the default to which request_key() should attach new keys if not otherwise specified. This is done with KEYCTL_SET_REQKEY_KEYRING and one of the KEY_REQKEY_DEFL_* constants. The current setting can also be read using this call. (7) request_key() is partially interruptible. If it is waiting for another process to finish constructing a key, it can be interrupted. This permits a request-key cycle to be broken without recourse to rebooting. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-Off-By: Benoit Boissinot <benoit.boissinot@ens-lyon.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 23:00:56 -06:00
instkey = key_get_instantiation_authkey(keyid);
if (!IS_ERR(instkey)) {
key_put(instkey);
KEYS: Alter use of key instantiation link-to-keyring argument Alter the use of the key instantiation and negation functions' link-to-keyring arguments. Currently this specifies a keyring in the target process to link the key into, creating the keyring if it doesn't exist. This, however, can be a problem for copy-on-write credentials as it means that the instantiating process can alter the credentials of the requesting process. This patch alters the behaviour such that: (1) If keyctl_instantiate_key() or keyctl_negate_key() are given a specific keyring by ID (ringid >= 0), then that keyring will be used. (2) If keyctl_instantiate_key() or keyctl_negate_key() are given one of the special constants that refer to the requesting process's keyrings (KEY_SPEC_*_KEYRING, all <= 0), then: (a) If sys_request_key() was given a keyring to use (destringid) then the key will be attached to that keyring. (b) If sys_request_key() was given a NULL keyring, then the key being instantiated will be attached to the default keyring as set by keyctl_set_reqkey_keyring(). (3) No extra link will be made. Decision point (1) follows current behaviour, and allows those instantiators who've searched for a specifically named keyring in the requestor's keyring so as to partition the keys by type to still have their named keyrings. Decision point (2) allows the requestor to make sure that the key or keys that get produced by request_key() go where they want, whilst allowing the instantiator to request that the key is retained. This is mainly useful for situations where the instantiator makes a secondary request, the key for which should be retained by the initial requestor: +-----------+ +--------------+ +--------------+ | | | | | | | Requestor |------->| Instantiator |------->| Instantiator | | | | | | | +-----------+ +--------------+ +--------------+ request_key() request_key() This might be useful, for example, in Kerberos, where the requestor requests a ticket, and then the ticket instantiator requests the TGT, which someone else then has to go and fetch. The TGT, however, should be retained in the keyrings of the requestor, not the first instantiator. To make this explict an extra special keyring constant is also added. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <jmorris@namei.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 16:39:14 -07:00
key_ref = lookup_user_key(keyid,
KEY_LOOKUP_PARTIAL,
0);
if (!IS_ERR(key_ref))
[PATCH] Keys: Make request-key create an authorisation key The attached patch makes the following changes: (1) There's a new special key type called ".request_key_auth". This is an authorisation key for when one process requests a key and another process is started to construct it. This type of key cannot be created by the user; nor can it be requested by kernel services. Authorisation keys hold two references: (a) Each refers to a key being constructed. When the key being constructed is instantiated the authorisation key is revoked, rendering it of no further use. (b) The "authorising process". This is either: (i) the process that called request_key(), or: (ii) if the process that called request_key() itself had an authorisation key in its session keyring, then the authorising process referred to by that authorisation key will also be referred to by the new authorisation key. This means that the process that initiated a chain of key requests will authorise the lot of them, and will, by default, wind up with the keys obtained from them in its keyrings. (2) request_key() creates an authorisation key which is then passed to /sbin/request-key in as part of a new session keyring. (3) When request_key() is searching for a key to hand back to the caller, if it comes across an authorisation key in the session keyring of the calling process, it will also search the keyrings of the process specified therein and it will use the specified process's credentials (fsuid, fsgid, groups) to do that rather than the calling process's credentials. This allows a process started by /sbin/request-key to find keys belonging to the authorising process. (4) A key can be read, even if the process executing KEYCTL_READ doesn't have direct read or search permission if that key is contained within the keyrings of a process specified by an authorisation key found within the calling process's session keyring, and is searchable using the credentials of the authorising process. This allows a process started by /sbin/request-key to read keys belonging to the authorising process. (5) The magic KEY_SPEC_*_KEYRING key IDs when passed to KEYCTL_INSTANTIATE or KEYCTL_NEGATE will specify a keyring of the authorising process, rather than the process doing the instantiation. (6) One of the process keyrings can be nominated as the default to which request_key() should attach new keys if not otherwise specified. This is done with KEYCTL_SET_REQKEY_KEYRING and one of the KEY_REQKEY_DEFL_* constants. The current setting can also be read using this call. (7) request_key() is partially interruptible. If it is waiting for another process to finish constructing a key, it can be interrupted. This permits a request-key cycle to be broken without recourse to rebooting. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-Off-By: Benoit Boissinot <benoit.boissinot@ens-lyon.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 23:00:56 -06:00
goto okay;
}
}
ret = PTR_ERR(key_ref);
goto error;
}
[PATCH] Keys: Make request-key create an authorisation key The attached patch makes the following changes: (1) There's a new special key type called ".request_key_auth". This is an authorisation key for when one process requests a key and another process is started to construct it. This type of key cannot be created by the user; nor can it be requested by kernel services. Authorisation keys hold two references: (a) Each refers to a key being constructed. When the key being constructed is instantiated the authorisation key is revoked, rendering it of no further use. (b) The "authorising process". This is either: (i) the process that called request_key(), or: (ii) if the process that called request_key() itself had an authorisation key in its session keyring, then the authorising process referred to by that authorisation key will also be referred to by the new authorisation key. This means that the process that initiated a chain of key requests will authorise the lot of them, and will, by default, wind up with the keys obtained from them in its keyrings. (2) request_key() creates an authorisation key which is then passed to /sbin/request-key in as part of a new session keyring. (3) When request_key() is searching for a key to hand back to the caller, if it comes across an authorisation key in the session keyring of the calling process, it will also search the keyrings of the process specified therein and it will use the specified process's credentials (fsuid, fsgid, groups) to do that rather than the calling process's credentials. This allows a process started by /sbin/request-key to find keys belonging to the authorising process. (4) A key can be read, even if the process executing KEYCTL_READ doesn't have direct read or search permission if that key is contained within the keyrings of a process specified by an authorisation key found within the calling process's session keyring, and is searchable using the credentials of the authorising process. This allows a process started by /sbin/request-key to read keys belonging to the authorising process. (5) The magic KEY_SPEC_*_KEYRING key IDs when passed to KEYCTL_INSTANTIATE or KEYCTL_NEGATE will specify a keyring of the authorising process, rather than the process doing the instantiation. (6) One of the process keyrings can be nominated as the default to which request_key() should attach new keys if not otherwise specified. This is done with KEYCTL_SET_REQKEY_KEYRING and one of the KEY_REQKEY_DEFL_* constants. The current setting can also be read using this call. (7) request_key() is partially interruptible. If it is waiting for another process to finish constructing a key, it can be interrupted. This permits a request-key cycle to be broken without recourse to rebooting. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-Off-By: Benoit Boissinot <benoit.boissinot@ens-lyon.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 23:00:56 -06:00
okay:
key = key_ref_to_ptr(key_ref);
desclen = strlen(key->description);
keys: Replace uid/gid/perm permissions checking with an ACL Replace the uid/gid/perm permissions checking on a key with an ACL to allow the SETATTR and SEARCH permissions to be split. This will also allow a greater range of subjects to represented. ============ WHY DO THIS? ============ The problem is that SETATTR and SEARCH cover a slew of actions, not all of which should be grouped together. For SETATTR, this includes actions that are about controlling access to a key: (1) Changing a key's ownership. (2) Changing a key's security information. (3) Setting a keyring's restriction. And actions that are about managing a key's lifetime: (4) Setting an expiry time. (5) Revoking a key. and (proposed) managing a key as part of a cache: (6) Invalidating a key. Managing a key's lifetime doesn't really have anything to do with controlling access to that key. Expiry time is awkward since it's more about the lifetime of the content and so, in some ways goes better with WRITE permission. It can, however, be set unconditionally by a process with an appropriate authorisation token for instantiating a key, and can also be set by the key type driver when a key is instantiated, so lumping it with the access-controlling actions is probably okay. As for SEARCH permission, that currently covers: (1) Finding keys in a keyring tree during a search. (2) Permitting keyrings to be joined. (3) Invalidation. But these don't really belong together either, since these actions really need to be controlled separately. Finally, there are number of special cases to do with granting the administrator special rights to invalidate or clear keys that I would like to handle with the ACL rather than key flags and special checks. =============== WHAT IS CHANGED =============== The SETATTR permission is split to create two new permissions: (1) SET_SECURITY - which allows the key's owner, group and ACL to be changed and a restriction to be placed on a keyring. (2) REVOKE - which allows a key to be revoked. The SEARCH permission is split to create: (1) SEARCH - which allows a keyring to be search and a key to be found. (2) JOIN - which allows a keyring to be joined as a session keyring. (3) INVAL - which allows a key to be invalidated. The WRITE permission is also split to create: (1) WRITE - which allows a key's content to be altered and links to be added, removed and replaced in a keyring. (2) CLEAR - which allows a keyring to be cleared completely. This is split out to make it possible to give just this to an administrator. (3) REVOKE - see above. Keys acquire ACLs which consist of a series of ACEs, and all that apply are unioned together. An ACE specifies a subject, such as: (*) Possessor - permitted to anyone who 'possesses' a key (*) Owner - permitted to the key owner (*) Group - permitted to the key group (*) Everyone - permitted to everyone Note that 'Other' has been replaced with 'Everyone' on the assumption that you wouldn't grant a permit to 'Other' that you wouldn't also grant to everyone else. Further subjects may be made available by later patches. The ACE also specifies a permissions mask. The set of permissions is now: VIEW Can view the key metadata READ Can read the key content WRITE Can update/modify the key content SEARCH Can find the key by searching/requesting LINK Can make a link to the key SET_SECURITY Can change owner, ACL, expiry INVAL Can invalidate REVOKE Can revoke JOIN Can join this keyring CLEAR Can clear this keyring The KEYCTL_SETPERM function is then deprecated. The KEYCTL_SET_TIMEOUT function then is permitted if SET_SECURITY is set, or if the caller has a valid instantiation auth token. The KEYCTL_INVALIDATE function then requires INVAL. The KEYCTL_REVOKE function then requires REVOKE. The KEYCTL_JOIN_SESSION_KEYRING function then requires JOIN to join an existing keyring. The JOIN permission is enabled by default for session keyrings and manually created keyrings only. ====================== BACKWARD COMPATIBILITY ====================== To maintain backward compatibility, KEYCTL_SETPERM will translate the permissions mask it is given into a new ACL for a key - unless KEYCTL_SET_ACL has been called on that key, in which case an error will be returned. It will convert possessor, owner, group and other permissions into separate ACEs, if each portion of the mask is non-zero. SETATTR permission turns on all of INVAL, REVOKE and SET_SECURITY. WRITE permission turns on WRITE, REVOKE and, if a keyring, CLEAR. JOIN is turned on if a keyring is being altered. The KEYCTL_DESCRIBE function translates the ACL back into a permissions mask to return depending on possessor, owner, group and everyone ACEs. It will make the following mappings: (1) INVAL, JOIN -> SEARCH (2) SET_SECURITY -> SETATTR (3) REVOKE -> WRITE if SETATTR isn't already set (4) CLEAR -> WRITE Note that the value subsequently returned by KEYCTL_DESCRIBE may not match the value set with KEYCTL_SETATTR. ======= TESTING ======= This passes the keyutils testsuite for all but a couple of tests: (1) tests/keyctl/dh_compute/badargs: The first wrong-key-type test now returns EOPNOTSUPP rather than ENOKEY as READ permission isn't removed if the type doesn't have ->read(). You still can't actually read the key. (2) tests/keyctl/permitting/valid: The view-other-permissions test doesn't work as Other has been replaced with Everyone in the ACL. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-27 16:03:07 -06:00
rcu_read_lock();
perm = key_acl_to_perm(rcu_dereference(key->acl));
rcu_read_unlock();
/* calculate how much information we're going to return */
ret = -ENOMEM;
infobuf = kasprintf(GFP_KERNEL,
"%s;%d;%d;%08x;",
key->type->name,
from_kuid_munged(current_user_ns(), key->uid),
from_kgid_munged(current_user_ns(), key->gid),
keys: Replace uid/gid/perm permissions checking with an ACL Replace the uid/gid/perm permissions checking on a key with an ACL to allow the SETATTR and SEARCH permissions to be split. This will also allow a greater range of subjects to represented. ============ WHY DO THIS? ============ The problem is that SETATTR and SEARCH cover a slew of actions, not all of which should be grouped together. For SETATTR, this includes actions that are about controlling access to a key: (1) Changing a key's ownership. (2) Changing a key's security information. (3) Setting a keyring's restriction. And actions that are about managing a key's lifetime: (4) Setting an expiry time. (5) Revoking a key. and (proposed) managing a key as part of a cache: (6) Invalidating a key. Managing a key's lifetime doesn't really have anything to do with controlling access to that key. Expiry time is awkward since it's more about the lifetime of the content and so, in some ways goes better with WRITE permission. It can, however, be set unconditionally by a process with an appropriate authorisation token for instantiating a key, and can also be set by the key type driver when a key is instantiated, so lumping it with the access-controlling actions is probably okay. As for SEARCH permission, that currently covers: (1) Finding keys in a keyring tree during a search. (2) Permitting keyrings to be joined. (3) Invalidation. But these don't really belong together either, since these actions really need to be controlled separately. Finally, there are number of special cases to do with granting the administrator special rights to invalidate or clear keys that I would like to handle with the ACL rather than key flags and special checks. =============== WHAT IS CHANGED =============== The SETATTR permission is split to create two new permissions: (1) SET_SECURITY - which allows the key's owner, group and ACL to be changed and a restriction to be placed on a keyring. (2) REVOKE - which allows a key to be revoked. The SEARCH permission is split to create: (1) SEARCH - which allows a keyring to be search and a key to be found. (2) JOIN - which allows a keyring to be joined as a session keyring. (3) INVAL - which allows a key to be invalidated. The WRITE permission is also split to create: (1) WRITE - which allows a key's content to be altered and links to be added, removed and replaced in a keyring. (2) CLEAR - which allows a keyring to be cleared completely. This is split out to make it possible to give just this to an administrator. (3) REVOKE - see above. Keys acquire ACLs which consist of a series of ACEs, and all that apply are unioned together. An ACE specifies a subject, such as: (*) Possessor - permitted to anyone who 'possesses' a key (*) Owner - permitted to the key owner (*) Group - permitted to the key group (*) Everyone - permitted to everyone Note that 'Other' has been replaced with 'Everyone' on the assumption that you wouldn't grant a permit to 'Other' that you wouldn't also grant to everyone else. Further subjects may be made available by later patches. The ACE also specifies a permissions mask. The set of permissions is now: VIEW Can view the key metadata READ Can read the key content WRITE Can update/modify the key content SEARCH Can find the key by searching/requesting LINK Can make a link to the key SET_SECURITY Can change owner, ACL, expiry INVAL Can invalidate REVOKE Can revoke JOIN Can join this keyring CLEAR Can clear this keyring The KEYCTL_SETPERM function is then deprecated. The KEYCTL_SET_TIMEOUT function then is permitted if SET_SECURITY is set, or if the caller has a valid instantiation auth token. The KEYCTL_INVALIDATE function then requires INVAL. The KEYCTL_REVOKE function then requires REVOKE. The KEYCTL_JOIN_SESSION_KEYRING function then requires JOIN to join an existing keyring. The JOIN permission is enabled by default for session keyrings and manually created keyrings only. ====================== BACKWARD COMPATIBILITY ====================== To maintain backward compatibility, KEYCTL_SETPERM will translate the permissions mask it is given into a new ACL for a key - unless KEYCTL_SET_ACL has been called on that key, in which case an error will be returned. It will convert possessor, owner, group and other permissions into separate ACEs, if each portion of the mask is non-zero. SETATTR permission turns on all of INVAL, REVOKE and SET_SECURITY. WRITE permission turns on WRITE, REVOKE and, if a keyring, CLEAR. JOIN is turned on if a keyring is being altered. The KEYCTL_DESCRIBE function translates the ACL back into a permissions mask to return depending on possessor, owner, group and everyone ACEs. It will make the following mappings: (1) INVAL, JOIN -> SEARCH (2) SET_SECURITY -> SETATTR (3) REVOKE -> WRITE if SETATTR isn't already set (4) CLEAR -> WRITE Note that the value subsequently returned by KEYCTL_DESCRIBE may not match the value set with KEYCTL_SETATTR. ======= TESTING ======= This passes the keyutils testsuite for all but a couple of tests: (1) tests/keyctl/dh_compute/badargs: The first wrong-key-type test now returns EOPNOTSUPP rather than ENOKEY as READ permission isn't removed if the type doesn't have ->read(). You still can't actually read the key. (2) tests/keyctl/permitting/valid: The view-other-permissions test doesn't work as Other has been replaced with Everyone in the ACL. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-27 16:03:07 -06:00
perm);
if (!infobuf)
goto error2;
infolen = strlen(infobuf);
ret = infolen + desclen + 1;
/* consider returning the data */
if (buffer && buflen >= ret) {
if (copy_to_user(buffer, infobuf, infolen) != 0 ||
copy_to_user(buffer + infolen, key->description,
desclen + 1) != 0)
ret = -EFAULT;
}
kfree(infobuf);
error2:
key_ref_put(key_ref);
error:
return ret;
}
/*
* Search the specified keyring and any keyrings it links to for a matching
* key. Only keyrings that grant the caller Search permission will be searched
* (this includes the starting keyring). Only keys with Search permission can
* be found.
*
* If successful, the found key will be linked to the destination keyring if
* supplied and the key has Link permission, and the found key ID will be
* returned.
*/
long keyctl_keyring_search(key_serial_t ringid,
const char __user *_type,
const char __user *_description,
key_serial_t destringid)
{
struct key_type *ktype;
key_ref_t keyring_ref, key_ref, dest_ref;
char type[32], *description;
long ret;
/* pull the type and description into kernel space */
ret = key_get_type_from_user(type, _type, sizeof(type));
if (ret < 0)
goto error;
description = strndup_user(_description, KEY_MAX_DESC_SIZE);
if (IS_ERR(description)) {
ret = PTR_ERR(description);
goto error;
}
/* get the keyring at which to begin the search */
keyring_ref = lookup_user_key(ringid, 0, KEY_NEED_SEARCH);
if (IS_ERR(keyring_ref)) {
ret = PTR_ERR(keyring_ref);
goto error2;
}
/* get the destination keyring if specified */
dest_ref = NULL;
if (destringid) {
dest_ref = lookup_user_key(destringid, KEY_LOOKUP_CREATE,
KEY_NEED_WRITE);
if (IS_ERR(dest_ref)) {
ret = PTR_ERR(dest_ref);
goto error3;
}
}
/* find the key type */
ktype = key_type_lookup(type);
if (IS_ERR(ktype)) {
ret = PTR_ERR(ktype);
goto error4;
}
/* do the search */
key_ref = keyring_search(keyring_ref, ktype, description, true);
if (IS_ERR(key_ref)) {
ret = PTR_ERR(key_ref);
/* treat lack or presence of a negative key the same */
if (ret == -EAGAIN)
ret = -ENOKEY;
goto error5;
}
/* link the resulting key to the destination keyring if we can */
if (dest_ref) {
ret = key_permission(key_ref, KEY_NEED_LINK);
if (ret < 0)
goto error6;
ret = key_link(key_ref_to_ptr(dest_ref), key_ref_to_ptr(key_ref));
if (ret < 0)
goto error6;
}
ret = key_ref_to_ptr(key_ref)->serial;
error6:
key_ref_put(key_ref);
error5:
key_type_put(ktype);
error4:
key_ref_put(dest_ref);
error3:
key_ref_put(keyring_ref);
error2:
kfree(description);
error:
return ret;
}
/*
* Read a key's payload.
*
* The key must either grant the caller Read permission, or it must grant the
* caller Search permission when searched for from the process keyrings.
*
* If successful, we place up to buflen bytes of data into the buffer, if one
* is provided, and return the amount of data that is available in the key,
* irrespective of how much we copied into the buffer.
*/
long keyctl_read_key(key_serial_t keyid, char __user *buffer, size_t buflen)
{
struct key *key;
key_ref_t key_ref;
long ret;
/* find the key first */
key_ref = lookup_user_key(keyid, 0, 0);
if (IS_ERR(key_ref)) {
ret = -ENOKEY;
goto error;
}
key = key_ref_to_ptr(key_ref);
KEYS: Fix race between updating and finding a negative key Consolidate KEY_FLAG_INSTANTIATED, KEY_FLAG_NEGATIVE and the rejection error into one field such that: (1) The instantiation state can be modified/read atomically. (2) The error can be accessed atomically with the state. (3) The error isn't stored unioned with the payload pointers. This deals with the problem that the state is spread over three different objects (two bits and a separate variable) and reading or updating them atomically isn't practical, given that not only can uninstantiated keys change into instantiated or rejected keys, but rejected keys can also turn into instantiated keys - and someone accessing the key might not be using any locking. The main side effect of this problem is that what was held in the payload may change, depending on the state. For instance, you might observe the key to be in the rejected state. You then read the cached error, but if the key semaphore wasn't locked, the key might've become instantiated between the two reads - and you might now have something in hand that isn't actually an error code. The state is now KEY_IS_UNINSTANTIATED, KEY_IS_POSITIVE or a negative error code if the key is negatively instantiated. The key_is_instantiated() function is replaced with key_is_positive() to avoid confusion as negative keys are also 'instantiated'. Additionally, barriering is included: (1) Order payload-set before state-set during instantiation. (2) Order state-read before payload-read when using the key. Further separate barriering is necessary if RCU is being used to access the payload content after reading the payload pointers. Fixes: 146aa8b1453b ("KEYS: Merge the type-specific data with the payload data") Cc: stable@vger.kernel.org # v4.4+ Reported-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Eric Biggers <ebiggers@google.com>
2017-10-04 09:43:25 -06:00
ret = key_read_state(key);
if (ret < 0)
goto error2; /* Negatively instantiated */
KEYS: prevent KEYCTL_READ on negative key Because keyctl_read_key() looks up the key with no permissions requested, it may find a negatively instantiated key. If the key is also possessed, we went ahead and called ->read() on the key. But the key payload will actually contain the ->reject_error rather than the normal payload. Thus, the kernel oopses trying to read the user_key_payload from memory address (int)-ENOKEY = 0x00000000ffffff82. Fortunately the payload data is stored inline, so it shouldn't be possible to abuse this as an arbitrary memory read primitive... Reproducer: keyctl new_session keyctl request2 user desc '' @s keyctl read $(keyctl show | awk '/user: desc/ {print $1}') It causes a crash like the following: BUG: unable to handle kernel paging request at 00000000ffffff92 IP: user_read+0x33/0xa0 PGD 36a54067 P4D 36a54067 PUD 0 Oops: 0000 [#1] SMP CPU: 0 PID: 211 Comm: keyctl Not tainted 4.14.0-rc1 #337 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-20170228_101828-anatol 04/01/2014 task: ffff90aa3b74c3c0 task.stack: ffff9878c0478000 RIP: 0010:user_read+0x33/0xa0 RSP: 0018:ffff9878c047bee8 EFLAGS: 00010246 RAX: 0000000000000001 RBX: ffff90aa3d7da340 RCX: 0000000000000017 RDX: 0000000000000000 RSI: 00000000ffffff82 RDI: ffff90aa3d7da340 RBP: ffff9878c047bf00 R08: 00000024f95da94f R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f58ece69740(0000) GS:ffff90aa3e200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000ffffff92 CR3: 0000000036adc001 CR4: 00000000003606f0 Call Trace: keyctl_read_key+0xac/0xe0 SyS_keyctl+0x99/0x120 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x7f58ec787bb9 RSP: 002b:00007ffc8d401678 EFLAGS: 00000206 ORIG_RAX: 00000000000000fa RAX: ffffffffffffffda RBX: 00007ffc8d402800 RCX: 00007f58ec787bb9 RDX: 0000000000000000 RSI: 00000000174a63ac RDI: 000000000000000b RBP: 0000000000000004 R08: 00007ffc8d402809 R09: 0000000000000020 R10: 0000000000000000 R11: 0000000000000206 R12: 00007ffc8d402800 R13: 00007ffc8d4016e0 R14: 0000000000000000 R15: 0000000000000000 Code: e5 41 55 49 89 f5 41 54 49 89 d4 53 48 89 fb e8 a4 b4 ad ff 85 c0 74 09 80 3d b9 4c 96 00 00 74 43 48 8b b3 20 01 00 00 4d 85 ed <0f> b7 5e 10 74 29 4d 85 e4 74 24 4c 39 e3 4c 89 e2 4c 89 ef 48 RIP: user_read+0x33/0xa0 RSP: ffff9878c047bee8 CR2: 00000000ffffff92 Fixes: 61ea0c0ba904 ("KEYS: Skip key state checks when checking for possession") Cc: <stable@vger.kernel.org> [v3.13+] Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com>
2017-09-18 12:37:23 -06:00
/* see if we can read it directly */
ret = key_permission(key_ref, KEY_NEED_READ);
if (ret == 0)
goto can_read_key;
if (ret != -EACCES)
goto error2;
/* we can't; see if it's searchable from this process's keyrings
* - we automatically take account of the fact that it may be
* dangling off an instantiation key
*/
if (!is_key_possessed(key_ref)) {
ret = -EACCES;
goto error2;
}
/* the key is probably readable - now try to read it */
can_read_key:
KEYS: Fix race between read and revoke This fixes CVE-2015-7550. There's a race between keyctl_read() and keyctl_revoke(). If the revoke happens between keyctl_read() checking the validity of a key and the key's semaphore being taken, then the key type read method will see a revoked key. This causes a problem for the user-defined key type because it assumes in its read method that there will always be a payload in a non-revoked key and doesn't check for a NULL pointer. Fix this by making keyctl_read() check the validity of a key after taking semaphore instead of before. I think the bug was introduced with the original keyrings code. This was discovered by a multithreaded test program generated by syzkaller (http://github.com/google/syzkaller). Here's a cleaned up version: #include <sys/types.h> #include <keyutils.h> #include <pthread.h> void *thr0(void *arg) { key_serial_t key = (unsigned long)arg; keyctl_revoke(key); return 0; } void *thr1(void *arg) { key_serial_t key = (unsigned long)arg; char buffer[16]; keyctl_read(key, buffer, 16); return 0; } int main() { key_serial_t key = add_key("user", "%", "foo", 3, KEY_SPEC_USER_KEYRING); pthread_t th[5]; pthread_create(&th[0], 0, thr0, (void *)(unsigned long)key); pthread_create(&th[1], 0, thr1, (void *)(unsigned long)key); pthread_create(&th[2], 0, thr0, (void *)(unsigned long)key); pthread_create(&th[3], 0, thr1, (void *)(unsigned long)key); pthread_join(th[0], 0); pthread_join(th[1], 0); pthread_join(th[2], 0); pthread_join(th[3], 0); return 0; } Build as: cc -o keyctl-race keyctl-race.c -lkeyutils -lpthread Run as: while keyctl-race; do :; done as it may need several iterations to crash the kernel. The crash can be summarised as: BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 IP: [<ffffffff81279b08>] user_read+0x56/0xa3 ... Call Trace: [<ffffffff81276aa9>] keyctl_read_key+0xb6/0xd7 [<ffffffff81277815>] SyS_keyctl+0x83/0xe0 [<ffffffff815dbb97>] entry_SYSCALL_64_fastpath+0x12/0x6f Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Dmitry Vyukov <dvyukov@google.com> Cc: stable@vger.kernel.org Signed-off-by: James Morris <james.l.morris@oracle.com>
2015-12-17 18:34:26 -07:00
ret = -EOPNOTSUPP;
if (key->type->read) {
/* Read the data with the semaphore held (since we might sleep)
* to protect against the key being updated or revoked.
*/
down_read(&key->sem);
ret = key_validate(key);
if (ret == 0)
ret = key->type->read(key, buffer, buflen);
KEYS: Fix race between read and revoke This fixes CVE-2015-7550. There's a race between keyctl_read() and keyctl_revoke(). If the revoke happens between keyctl_read() checking the validity of a key and the key's semaphore being taken, then the key type read method will see a revoked key. This causes a problem for the user-defined key type because it assumes in its read method that there will always be a payload in a non-revoked key and doesn't check for a NULL pointer. Fix this by making keyctl_read() check the validity of a key after taking semaphore instead of before. I think the bug was introduced with the original keyrings code. This was discovered by a multithreaded test program generated by syzkaller (http://github.com/google/syzkaller). Here's a cleaned up version: #include <sys/types.h> #include <keyutils.h> #include <pthread.h> void *thr0(void *arg) { key_serial_t key = (unsigned long)arg; keyctl_revoke(key); return 0; } void *thr1(void *arg) { key_serial_t key = (unsigned long)arg; char buffer[16]; keyctl_read(key, buffer, 16); return 0; } int main() { key_serial_t key = add_key("user", "%", "foo", 3, KEY_SPEC_USER_KEYRING); pthread_t th[5]; pthread_create(&th[0], 0, thr0, (void *)(unsigned long)key); pthread_create(&th[1], 0, thr1, (void *)(unsigned long)key); pthread_create(&th[2], 0, thr0, (void *)(unsigned long)key); pthread_create(&th[3], 0, thr1, (void *)(unsigned long)key); pthread_join(th[0], 0); pthread_join(th[1], 0); pthread_join(th[2], 0); pthread_join(th[3], 0); return 0; } Build as: cc -o keyctl-race keyctl-race.c -lkeyutils -lpthread Run as: while keyctl-race; do :; done as it may need several iterations to crash the kernel. The crash can be summarised as: BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 IP: [<ffffffff81279b08>] user_read+0x56/0xa3 ... Call Trace: [<ffffffff81276aa9>] keyctl_read_key+0xb6/0xd7 [<ffffffff81277815>] SyS_keyctl+0x83/0xe0 [<ffffffff815dbb97>] entry_SYSCALL_64_fastpath+0x12/0x6f Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Dmitry Vyukov <dvyukov@google.com> Cc: stable@vger.kernel.org Signed-off-by: James Morris <james.l.morris@oracle.com>
2015-12-17 18:34:26 -07:00
up_read(&key->sem);
}
error2:
key_put(key);
error:
return ret;
}
/*
* Change the ownership of a key
*
* The key must grant the caller Setattr permission for this to work, though
* the key need not be fully instantiated yet. For the UID to be changed, or
* for the GID to be changed to a group the caller is not a member of, the
* caller must have sysadmin capability. If either uid or gid is -1 then that
* attribute is not changed.
*
* If the UID is to be changed, the new user must have sufficient quota to
* accept the key. The quota deduction will be removed from the old user to
* the new user should the attribute be changed.
*
* If successful, 0 will be returned.
*/
long keyctl_chown_key(key_serial_t id, uid_t user, gid_t group)
{
struct key_user *newowner, *zapowner = NULL;
struct key *key;
key_ref_t key_ref;
long ret;
kuid_t uid;
kgid_t gid;
uid = make_kuid(current_user_ns(), user);
gid = make_kgid(current_user_ns(), group);
ret = -EINVAL;
if ((user != (uid_t) -1) && !uid_valid(uid))
goto error;
if ((group != (gid_t) -1) && !gid_valid(gid))
goto error;
ret = 0;
if (user == (uid_t) -1 && group == (gid_t) -1)
goto error;
key_ref = lookup_user_key(id, KEY_LOOKUP_CREATE | KEY_LOOKUP_PARTIAL,
keys: Replace uid/gid/perm permissions checking with an ACL Replace the uid/gid/perm permissions checking on a key with an ACL to allow the SETATTR and SEARCH permissions to be split. This will also allow a greater range of subjects to represented. ============ WHY DO THIS? ============ The problem is that SETATTR and SEARCH cover a slew of actions, not all of which should be grouped together. For SETATTR, this includes actions that are about controlling access to a key: (1) Changing a key's ownership. (2) Changing a key's security information. (3) Setting a keyring's restriction. And actions that are about managing a key's lifetime: (4) Setting an expiry time. (5) Revoking a key. and (proposed) managing a key as part of a cache: (6) Invalidating a key. Managing a key's lifetime doesn't really have anything to do with controlling access to that key. Expiry time is awkward since it's more about the lifetime of the content and so, in some ways goes better with WRITE permission. It can, however, be set unconditionally by a process with an appropriate authorisation token for instantiating a key, and can also be set by the key type driver when a key is instantiated, so lumping it with the access-controlling actions is probably okay. As for SEARCH permission, that currently covers: (1) Finding keys in a keyring tree during a search. (2) Permitting keyrings to be joined. (3) Invalidation. But these don't really belong together either, since these actions really need to be controlled separately. Finally, there are number of special cases to do with granting the administrator special rights to invalidate or clear keys that I would like to handle with the ACL rather than key flags and special checks. =============== WHAT IS CHANGED =============== The SETATTR permission is split to create two new permissions: (1) SET_SECURITY - which allows the key's owner, group and ACL to be changed and a restriction to be placed on a keyring. (2) REVOKE - which allows a key to be revoked. The SEARCH permission is split to create: (1) SEARCH - which allows a keyring to be search and a key to be found. (2) JOIN - which allows a keyring to be joined as a session keyring. (3) INVAL - which allows a key to be invalidated. The WRITE permission is also split to create: (1) WRITE - which allows a key's content to be altered and links to be added, removed and replaced in a keyring. (2) CLEAR - which allows a keyring to be cleared completely. This is split out to make it possible to give just this to an administrator. (3) REVOKE - see above. Keys acquire ACLs which consist of a series of ACEs, and all that apply are unioned together. An ACE specifies a subject, such as: (*) Possessor - permitted to anyone who 'possesses' a key (*) Owner - permitted to the key owner (*) Group - permitted to the key group (*) Everyone - permitted to everyone Note that 'Other' has been replaced with 'Everyone' on the assumption that you wouldn't grant a permit to 'Other' that you wouldn't also grant to everyone else. Further subjects may be made available by later patches. The ACE also specifies a permissions mask. The set of permissions is now: VIEW Can view the key metadata READ Can read the key content WRITE Can update/modify the key content SEARCH Can find the key by searching/requesting LINK Can make a link to the key SET_SECURITY Can change owner, ACL, expiry INVAL Can invalidate REVOKE Can revoke JOIN Can join this keyring CLEAR Can clear this keyring The KEYCTL_SETPERM function is then deprecated. The KEYCTL_SET_TIMEOUT function then is permitted if SET_SECURITY is set, or if the caller has a valid instantiation auth token. The KEYCTL_INVALIDATE function then requires INVAL. The KEYCTL_REVOKE function then requires REVOKE. The KEYCTL_JOIN_SESSION_KEYRING function then requires JOIN to join an existing keyring. The JOIN permission is enabled by default for session keyrings and manually created keyrings only. ====================== BACKWARD COMPATIBILITY ====================== To maintain backward compatibility, KEYCTL_SETPERM will translate the permissions mask it is given into a new ACL for a key - unless KEYCTL_SET_ACL has been called on that key, in which case an error will be returned. It will convert possessor, owner, group and other permissions into separate ACEs, if each portion of the mask is non-zero. SETATTR permission turns on all of INVAL, REVOKE and SET_SECURITY. WRITE permission turns on WRITE, REVOKE and, if a keyring, CLEAR. JOIN is turned on if a keyring is being altered. The KEYCTL_DESCRIBE function translates the ACL back into a permissions mask to return depending on possessor, owner, group and everyone ACEs. It will make the following mappings: (1) INVAL, JOIN -> SEARCH (2) SET_SECURITY -> SETATTR (3) REVOKE -> WRITE if SETATTR isn't already set (4) CLEAR -> WRITE Note that the value subsequently returned by KEYCTL_DESCRIBE may not match the value set with KEYCTL_SETATTR. ======= TESTING ======= This passes the keyutils testsuite for all but a couple of tests: (1) tests/keyctl/dh_compute/badargs: The first wrong-key-type test now returns EOPNOTSUPP rather than ENOKEY as READ permission isn't removed if the type doesn't have ->read(). You still can't actually read the key. (2) tests/keyctl/permitting/valid: The view-other-permissions test doesn't work as Other has been replaced with Everyone in the ACL. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-27 16:03:07 -06:00
KEY_NEED_SETSEC);
if (IS_ERR(key_ref)) {
ret = PTR_ERR(key_ref);
goto error;
}
key = key_ref_to_ptr(key_ref);
/* make the changes with the locks held to prevent chown/chown races */
ret = -EACCES;
down_write(&key->sem);
if (!capable(CAP_SYS_ADMIN)) {
/* only the sysadmin can chown a key to some other UID */
if (user != (uid_t) -1 && !uid_eq(key->uid, uid))
goto error_put;
/* only the sysadmin can set the key's GID to a group other
* than one of those that the current process subscribes to */
if (group != (gid_t) -1 && !gid_eq(gid, key->gid) && !in_group_p(gid))
goto error_put;
}
/* change the UID */
if (user != (uid_t) -1 && !uid_eq(uid, key->uid)) {
ret = -ENOMEM;
newowner = key_user_lookup(uid);
if (!newowner)
goto error_put;
/* transfer the quota burden to the new user */
if (test_bit(KEY_FLAG_IN_QUOTA, &key->flags)) {
unsigned maxkeys = uid_eq(uid, GLOBAL_ROOT_UID) ?
key_quota_root_maxkeys : key_quota_maxkeys;
unsigned maxbytes = uid_eq(uid, GLOBAL_ROOT_UID) ?
key_quota_root_maxbytes : key_quota_maxbytes;
spin_lock(&newowner->lock);
if (newowner->qnkeys + 1 >= maxkeys ||
newowner->qnbytes + key->quotalen >= maxbytes ||
newowner->qnbytes + key->quotalen <
newowner->qnbytes)
goto quota_overrun;
newowner->qnkeys++;
newowner->qnbytes += key->quotalen;
spin_unlock(&newowner->lock);
spin_lock(&key->user->lock);
key->user->qnkeys--;
key->user->qnbytes -= key->quotalen;
spin_unlock(&key->user->lock);
}
atomic_dec(&key->user->nkeys);
atomic_inc(&newowner->nkeys);
KEYS: Fix race between updating and finding a negative key Consolidate KEY_FLAG_INSTANTIATED, KEY_FLAG_NEGATIVE and the rejection error into one field such that: (1) The instantiation state can be modified/read atomically. (2) The error can be accessed atomically with the state. (3) The error isn't stored unioned with the payload pointers. This deals with the problem that the state is spread over three different objects (two bits and a separate variable) and reading or updating them atomically isn't practical, given that not only can uninstantiated keys change into instantiated or rejected keys, but rejected keys can also turn into instantiated keys - and someone accessing the key might not be using any locking. The main side effect of this problem is that what was held in the payload may change, depending on the state. For instance, you might observe the key to be in the rejected state. You then read the cached error, but if the key semaphore wasn't locked, the key might've become instantiated between the two reads - and you might now have something in hand that isn't actually an error code. The state is now KEY_IS_UNINSTANTIATED, KEY_IS_POSITIVE or a negative error code if the key is negatively instantiated. The key_is_instantiated() function is replaced with key_is_positive() to avoid confusion as negative keys are also 'instantiated'. Additionally, barriering is included: (1) Order payload-set before state-set during instantiation. (2) Order state-read before payload-read when using the key. Further separate barriering is necessary if RCU is being used to access the payload content after reading the payload pointers. Fixes: 146aa8b1453b ("KEYS: Merge the type-specific data with the payload data") Cc: stable@vger.kernel.org # v4.4+ Reported-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Eric Biggers <ebiggers@google.com>
2017-10-04 09:43:25 -06:00
if (key->state != KEY_IS_UNINSTANTIATED) {
atomic_dec(&key->user->nikeys);
atomic_inc(&newowner->nikeys);
}
zapowner = key->user;
key->user = newowner;
key->uid = uid;
}
/* change the GID */
if (group != (gid_t) -1)
key->gid = gid;
ret = 0;
error_put:
up_write(&key->sem);
key_put(key);
if (zapowner)
key_user_put(zapowner);
error:
return ret;
quota_overrun:
spin_unlock(&newowner->lock);
zapowner = newowner;
ret = -EDQUOT;
goto error_put;
}
/*
* Change the permission mask on a key.
*
* The key must grant the caller Setattr permission for this to work, though
* the key need not be fully instantiated yet. If the caller does not have
* sysadmin capability, it may only change the permission on keys that it owns.
*/
keys: Replace uid/gid/perm permissions checking with an ACL Replace the uid/gid/perm permissions checking on a key with an ACL to allow the SETATTR and SEARCH permissions to be split. This will also allow a greater range of subjects to represented. ============ WHY DO THIS? ============ The problem is that SETATTR and SEARCH cover a slew of actions, not all of which should be grouped together. For SETATTR, this includes actions that are about controlling access to a key: (1) Changing a key's ownership. (2) Changing a key's security information. (3) Setting a keyring's restriction. And actions that are about managing a key's lifetime: (4) Setting an expiry time. (5) Revoking a key. and (proposed) managing a key as part of a cache: (6) Invalidating a key. Managing a key's lifetime doesn't really have anything to do with controlling access to that key. Expiry time is awkward since it's more about the lifetime of the content and so, in some ways goes better with WRITE permission. It can, however, be set unconditionally by a process with an appropriate authorisation token for instantiating a key, and can also be set by the key type driver when a key is instantiated, so lumping it with the access-controlling actions is probably okay. As for SEARCH permission, that currently covers: (1) Finding keys in a keyring tree during a search. (2) Permitting keyrings to be joined. (3) Invalidation. But these don't really belong together either, since these actions really need to be controlled separately. Finally, there are number of special cases to do with granting the administrator special rights to invalidate or clear keys that I would like to handle with the ACL rather than key flags and special checks. =============== WHAT IS CHANGED =============== The SETATTR permission is split to create two new permissions: (1) SET_SECURITY - which allows the key's owner, group and ACL to be changed and a restriction to be placed on a keyring. (2) REVOKE - which allows a key to be revoked. The SEARCH permission is split to create: (1) SEARCH - which allows a keyring to be search and a key to be found. (2) JOIN - which allows a keyring to be joined as a session keyring. (3) INVAL - which allows a key to be invalidated. The WRITE permission is also split to create: (1) WRITE - which allows a key's content to be altered and links to be added, removed and replaced in a keyring. (2) CLEAR - which allows a keyring to be cleared completely. This is split out to make it possible to give just this to an administrator. (3) REVOKE - see above. Keys acquire ACLs which consist of a series of ACEs, and all that apply are unioned together. An ACE specifies a subject, such as: (*) Possessor - permitted to anyone who 'possesses' a key (*) Owner - permitted to the key owner (*) Group - permitted to the key group (*) Everyone - permitted to everyone Note that 'Other' has been replaced with 'Everyone' on the assumption that you wouldn't grant a permit to 'Other' that you wouldn't also grant to everyone else. Further subjects may be made available by later patches. The ACE also specifies a permissions mask. The set of permissions is now: VIEW Can view the key metadata READ Can read the key content WRITE Can update/modify the key content SEARCH Can find the key by searching/requesting LINK Can make a link to the key SET_SECURITY Can change owner, ACL, expiry INVAL Can invalidate REVOKE Can revoke JOIN Can join this keyring CLEAR Can clear this keyring The KEYCTL_SETPERM function is then deprecated. The KEYCTL_SET_TIMEOUT function then is permitted if SET_SECURITY is set, or if the caller has a valid instantiation auth token. The KEYCTL_INVALIDATE function then requires INVAL. The KEYCTL_REVOKE function then requires REVOKE. The KEYCTL_JOIN_SESSION_KEYRING function then requires JOIN to join an existing keyring. The JOIN permission is enabled by default for session keyrings and manually created keyrings only. ====================== BACKWARD COMPATIBILITY ====================== To maintain backward compatibility, KEYCTL_SETPERM will translate the permissions mask it is given into a new ACL for a key - unless KEYCTL_SET_ACL has been called on that key, in which case an error will be returned. It will convert possessor, owner, group and other permissions into separate ACEs, if each portion of the mask is non-zero. SETATTR permission turns on all of INVAL, REVOKE and SET_SECURITY. WRITE permission turns on WRITE, REVOKE and, if a keyring, CLEAR. JOIN is turned on if a keyring is being altered. The KEYCTL_DESCRIBE function translates the ACL back into a permissions mask to return depending on possessor, owner, group and everyone ACEs. It will make the following mappings: (1) INVAL, JOIN -> SEARCH (2) SET_SECURITY -> SETATTR (3) REVOKE -> WRITE if SETATTR isn't already set (4) CLEAR -> WRITE Note that the value subsequently returned by KEYCTL_DESCRIBE may not match the value set with KEYCTL_SETATTR. ======= TESTING ======= This passes the keyutils testsuite for all but a couple of tests: (1) tests/keyctl/dh_compute/badargs: The first wrong-key-type test now returns EOPNOTSUPP rather than ENOKEY as READ permission isn't removed if the type doesn't have ->read(). You still can't actually read the key. (2) tests/keyctl/permitting/valid: The view-other-permissions test doesn't work as Other has been replaced with Everyone in the ACL. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-27 16:03:07 -06:00
long keyctl_setperm_key(key_serial_t id, unsigned int perm)
{
keys: Replace uid/gid/perm permissions checking with an ACL Replace the uid/gid/perm permissions checking on a key with an ACL to allow the SETATTR and SEARCH permissions to be split. This will also allow a greater range of subjects to represented. ============ WHY DO THIS? ============ The problem is that SETATTR and SEARCH cover a slew of actions, not all of which should be grouped together. For SETATTR, this includes actions that are about controlling access to a key: (1) Changing a key's ownership. (2) Changing a key's security information. (3) Setting a keyring's restriction. And actions that are about managing a key's lifetime: (4) Setting an expiry time. (5) Revoking a key. and (proposed) managing a key as part of a cache: (6) Invalidating a key. Managing a key's lifetime doesn't really have anything to do with controlling access to that key. Expiry time is awkward since it's more about the lifetime of the content and so, in some ways goes better with WRITE permission. It can, however, be set unconditionally by a process with an appropriate authorisation token for instantiating a key, and can also be set by the key type driver when a key is instantiated, so lumping it with the access-controlling actions is probably okay. As for SEARCH permission, that currently covers: (1) Finding keys in a keyring tree during a search. (2) Permitting keyrings to be joined. (3) Invalidation. But these don't really belong together either, since these actions really need to be controlled separately. Finally, there are number of special cases to do with granting the administrator special rights to invalidate or clear keys that I would like to handle with the ACL rather than key flags and special checks. =============== WHAT IS CHANGED =============== The SETATTR permission is split to create two new permissions: (1) SET_SECURITY - which allows the key's owner, group and ACL to be changed and a restriction to be placed on a keyring. (2) REVOKE - which allows a key to be revoked. The SEARCH permission is split to create: (1) SEARCH - which allows a keyring to be search and a key to be found. (2) JOIN - which allows a keyring to be joined as a session keyring. (3) INVAL - which allows a key to be invalidated. The WRITE permission is also split to create: (1) WRITE - which allows a key's content to be altered and links to be added, removed and replaced in a keyring. (2) CLEAR - which allows a keyring to be cleared completely. This is split out to make it possible to give just this to an administrator. (3) REVOKE - see above. Keys acquire ACLs which consist of a series of ACEs, and all that apply are unioned together. An ACE specifies a subject, such as: (*) Possessor - permitted to anyone who 'possesses' a key (*) Owner - permitted to the key owner (*) Group - permitted to the key group (*) Everyone - permitted to everyone Note that 'Other' has been replaced with 'Everyone' on the assumption that you wouldn't grant a permit to 'Other' that you wouldn't also grant to everyone else. Further subjects may be made available by later patches. The ACE also specifies a permissions mask. The set of permissions is now: VIEW Can view the key metadata READ Can read the key content WRITE Can update/modify the key content SEARCH Can find the key by searching/requesting LINK Can make a link to the key SET_SECURITY Can change owner, ACL, expiry INVAL Can invalidate REVOKE Can revoke JOIN Can join this keyring CLEAR Can clear this keyring The KEYCTL_SETPERM function is then deprecated. The KEYCTL_SET_TIMEOUT function then is permitted if SET_SECURITY is set, or if the caller has a valid instantiation auth token. The KEYCTL_INVALIDATE function then requires INVAL. The KEYCTL_REVOKE function then requires REVOKE. The KEYCTL_JOIN_SESSION_KEYRING function then requires JOIN to join an existing keyring. The JOIN permission is enabled by default for session keyrings and manually created keyrings only. ====================== BACKWARD COMPATIBILITY ====================== To maintain backward compatibility, KEYCTL_SETPERM will translate the permissions mask it is given into a new ACL for a key - unless KEYCTL_SET_ACL has been called on that key, in which case an error will be returned. It will convert possessor, owner, group and other permissions into separate ACEs, if each portion of the mask is non-zero. SETATTR permission turns on all of INVAL, REVOKE and SET_SECURITY. WRITE permission turns on WRITE, REVOKE and, if a keyring, CLEAR. JOIN is turned on if a keyring is being altered. The KEYCTL_DESCRIBE function translates the ACL back into a permissions mask to return depending on possessor, owner, group and everyone ACEs. It will make the following mappings: (1) INVAL, JOIN -> SEARCH (2) SET_SECURITY -> SETATTR (3) REVOKE -> WRITE if SETATTR isn't already set (4) CLEAR -> WRITE Note that the value subsequently returned by KEYCTL_DESCRIBE may not match the value set with KEYCTL_SETATTR. ======= TESTING ======= This passes the keyutils testsuite for all but a couple of tests: (1) tests/keyctl/dh_compute/badargs: The first wrong-key-type test now returns EOPNOTSUPP rather than ENOKEY as READ permission isn't removed if the type doesn't have ->read(). You still can't actually read the key. (2) tests/keyctl/permitting/valid: The view-other-permissions test doesn't work as Other has been replaced with Everyone in the ACL. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-27 16:03:07 -06:00
struct key_acl *acl;
struct key *key;
key_ref_t key_ref;
long ret;
keys: Replace uid/gid/perm permissions checking with an ACL Replace the uid/gid/perm permissions checking on a key with an ACL to allow the SETATTR and SEARCH permissions to be split. This will also allow a greater range of subjects to represented. ============ WHY DO THIS? ============ The problem is that SETATTR and SEARCH cover a slew of actions, not all of which should be grouped together. For SETATTR, this includes actions that are about controlling access to a key: (1) Changing a key's ownership. (2) Changing a key's security information. (3) Setting a keyring's restriction. And actions that are about managing a key's lifetime: (4) Setting an expiry time. (5) Revoking a key. and (proposed) managing a key as part of a cache: (6) Invalidating a key. Managing a key's lifetime doesn't really have anything to do with controlling access to that key. Expiry time is awkward since it's more about the lifetime of the content and so, in some ways goes better with WRITE permission. It can, however, be set unconditionally by a process with an appropriate authorisation token for instantiating a key, and can also be set by the key type driver when a key is instantiated, so lumping it with the access-controlling actions is probably okay. As for SEARCH permission, that currently covers: (1) Finding keys in a keyring tree during a search. (2) Permitting keyrings to be joined. (3) Invalidation. But these don't really belong together either, since these actions really need to be controlled separately. Finally, there are number of special cases to do with granting the administrator special rights to invalidate or clear keys that I would like to handle with the ACL rather than key flags and special checks. =============== WHAT IS CHANGED =============== The SETATTR permission is split to create two new permissions: (1) SET_SECURITY - which allows the key's owner, group and ACL to be changed and a restriction to be placed on a keyring. (2) REVOKE - which allows a key to be revoked. The SEARCH permission is split to create: (1) SEARCH - which allows a keyring to be search and a key to be found. (2) JOIN - which allows a keyring to be joined as a session keyring. (3) INVAL - which allows a key to be invalidated. The WRITE permission is also split to create: (1) WRITE - which allows a key's content to be altered and links to be added, removed and replaced in a keyring. (2) CLEAR - which allows a keyring to be cleared completely. This is split out to make it possible to give just this to an administrator. (3) REVOKE - see above. Keys acquire ACLs which consist of a series of ACEs, and all that apply are unioned together. An ACE specifies a subject, such as: (*) Possessor - permitted to anyone who 'possesses' a key (*) Owner - permitted to the key owner (*) Group - permitted to the key group (*) Everyone - permitted to everyone Note that 'Other' has been replaced with 'Everyone' on the assumption that you wouldn't grant a permit to 'Other' that you wouldn't also grant to everyone else. Further subjects may be made available by later patches. The ACE also specifies a permissions mask. The set of permissions is now: VIEW Can view the key metadata READ Can read the key content WRITE Can update/modify the key content SEARCH Can find the key by searching/requesting LINK Can make a link to the key SET_SECURITY Can change owner, ACL, expiry INVAL Can invalidate REVOKE Can revoke JOIN Can join this keyring CLEAR Can clear this keyring The KEYCTL_SETPERM function is then deprecated. The KEYCTL_SET_TIMEOUT function then is permitted if SET_SECURITY is set, or if the caller has a valid instantiation auth token. The KEYCTL_INVALIDATE function then requires INVAL. The KEYCTL_REVOKE function then requires REVOKE. The KEYCTL_JOIN_SESSION_KEYRING function then requires JOIN to join an existing keyring. The JOIN permission is enabled by default for session keyrings and manually created keyrings only. ====================== BACKWARD COMPATIBILITY ====================== To maintain backward compatibility, KEYCTL_SETPERM will translate the permissions mask it is given into a new ACL for a key - unless KEYCTL_SET_ACL has been called on that key, in which case an error will be returned. It will convert possessor, owner, group and other permissions into separate ACEs, if each portion of the mask is non-zero. SETATTR permission turns on all of INVAL, REVOKE and SET_SECURITY. WRITE permission turns on WRITE, REVOKE and, if a keyring, CLEAR. JOIN is turned on if a keyring is being altered. The KEYCTL_DESCRIBE function translates the ACL back into a permissions mask to return depending on possessor, owner, group and everyone ACEs. It will make the following mappings: (1) INVAL, JOIN -> SEARCH (2) SET_SECURITY -> SETATTR (3) REVOKE -> WRITE if SETATTR isn't already set (4) CLEAR -> WRITE Note that the value subsequently returned by KEYCTL_DESCRIBE may not match the value set with KEYCTL_SETATTR. ======= TESTING ======= This passes the keyutils testsuite for all but a couple of tests: (1) tests/keyctl/dh_compute/badargs: The first wrong-key-type test now returns EOPNOTSUPP rather than ENOKEY as READ permission isn't removed if the type doesn't have ->read(). You still can't actually read the key. (2) tests/keyctl/permitting/valid: The view-other-permissions test doesn't work as Other has been replaced with Everyone in the ACL. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-27 16:03:07 -06:00
int nr, i, j;
if (perm & ~(KEY_POS_ALL | KEY_USR_ALL | KEY_GRP_ALL | KEY_OTH_ALL))
keys: Replace uid/gid/perm permissions checking with an ACL Replace the uid/gid/perm permissions checking on a key with an ACL to allow the SETATTR and SEARCH permissions to be split. This will also allow a greater range of subjects to represented. ============ WHY DO THIS? ============ The problem is that SETATTR and SEARCH cover a slew of actions, not all of which should be grouped together. For SETATTR, this includes actions that are about controlling access to a key: (1) Changing a key's ownership. (2) Changing a key's security information. (3) Setting a keyring's restriction. And actions that are about managing a key's lifetime: (4) Setting an expiry time. (5) Revoking a key. and (proposed) managing a key as part of a cache: (6) Invalidating a key. Managing a key's lifetime doesn't really have anything to do with controlling access to that key. Expiry time is awkward since it's more about the lifetime of the content and so, in some ways goes better with WRITE permission. It can, however, be set unconditionally by a process with an appropriate authorisation token for instantiating a key, and can also be set by the key type driver when a key is instantiated, so lumping it with the access-controlling actions is probably okay. As for SEARCH permission, that currently covers: (1) Finding keys in a keyring tree during a search. (2) Permitting keyrings to be joined. (3) Invalidation. But these don't really belong together either, since these actions really need to be controlled separately. Finally, there are number of special cases to do with granting the administrator special rights to invalidate or clear keys that I would like to handle with the ACL rather than key flags and special checks. =============== WHAT IS CHANGED =============== The SETATTR permission is split to create two new permissions: (1) SET_SECURITY - which allows the key's owner, group and ACL to be changed and a restriction to be placed on a keyring. (2) REVOKE - which allows a key to be revoked. The SEARCH permission is split to create: (1) SEARCH - which allows a keyring to be search and a key to be found. (2) JOIN - which allows a keyring to be joined as a session keyring. (3) INVAL - which allows a key to be invalidated. The WRITE permission is also split to create: (1) WRITE - which allows a key's content to be altered and links to be added, removed and replaced in a keyring. (2) CLEAR - which allows a keyring to be cleared completely. This is split out to make it possible to give just this to an administrator. (3) REVOKE - see above. Keys acquire ACLs which consist of a series of ACEs, and all that apply are unioned together. An ACE specifies a subject, such as: (*) Possessor - permitted to anyone who 'possesses' a key (*) Owner - permitted to the key owner (*) Group - permitted to the key group (*) Everyone - permitted to everyone Note that 'Other' has been replaced with 'Everyone' on the assumption that you wouldn't grant a permit to 'Other' that you wouldn't also grant to everyone else. Further subjects may be made available by later patches. The ACE also specifies a permissions mask. The set of permissions is now: VIEW Can view the key metadata READ Can read the key content WRITE Can update/modify the key content SEARCH Can find the key by searching/requesting LINK Can make a link to the key SET_SECURITY Can change owner, ACL, expiry INVAL Can invalidate REVOKE Can revoke JOIN Can join this keyring CLEAR Can clear this keyring The KEYCTL_SETPERM function is then deprecated. The KEYCTL_SET_TIMEOUT function then is permitted if SET_SECURITY is set, or if the caller has a valid instantiation auth token. The KEYCTL_INVALIDATE function then requires INVAL. The KEYCTL_REVOKE function then requires REVOKE. The KEYCTL_JOIN_SESSION_KEYRING function then requires JOIN to join an existing keyring. The JOIN permission is enabled by default for session keyrings and manually created keyrings only. ====================== BACKWARD COMPATIBILITY ====================== To maintain backward compatibility, KEYCTL_SETPERM will translate the permissions mask it is given into a new ACL for a key - unless KEYCTL_SET_ACL has been called on that key, in which case an error will be returned. It will convert possessor, owner, group and other permissions into separate ACEs, if each portion of the mask is non-zero. SETATTR permission turns on all of INVAL, REVOKE and SET_SECURITY. WRITE permission turns on WRITE, REVOKE and, if a keyring, CLEAR. JOIN is turned on if a keyring is being altered. The KEYCTL_DESCRIBE function translates the ACL back into a permissions mask to return depending on possessor, owner, group and everyone ACEs. It will make the following mappings: (1) INVAL, JOIN -> SEARCH (2) SET_SECURITY -> SETATTR (3) REVOKE -> WRITE if SETATTR isn't already set (4) CLEAR -> WRITE Note that the value subsequently returned by KEYCTL_DESCRIBE may not match the value set with KEYCTL_SETATTR. ======= TESTING ======= This passes the keyutils testsuite for all but a couple of tests: (1) tests/keyctl/dh_compute/badargs: The first wrong-key-type test now returns EOPNOTSUPP rather than ENOKEY as READ permission isn't removed if the type doesn't have ->read(). You still can't actually read the key. (2) tests/keyctl/permitting/valid: The view-other-permissions test doesn't work as Other has been replaced with Everyone in the ACL. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-27 16:03:07 -06:00
return -EINVAL;
nr = 0;
if (perm & KEY_POS_ALL) nr++;
if (perm & KEY_USR_ALL) nr++;
if (perm & KEY_GRP_ALL) nr++;
if (perm & KEY_OTH_ALL) nr++;
key_ref = lookup_user_key(id, KEY_LOOKUP_CREATE | KEY_LOOKUP_PARTIAL,
keys: Replace uid/gid/perm permissions checking with an ACL Replace the uid/gid/perm permissions checking on a key with an ACL to allow the SETATTR and SEARCH permissions to be split. This will also allow a greater range of subjects to represented. ============ WHY DO THIS? ============ The problem is that SETATTR and SEARCH cover a slew of actions, not all of which should be grouped together. For SETATTR, this includes actions that are about controlling access to a key: (1) Changing a key's ownership. (2) Changing a key's security information. (3) Setting a keyring's restriction. And actions that are about managing a key's lifetime: (4) Setting an expiry time. (5) Revoking a key. and (proposed) managing a key as part of a cache: (6) Invalidating a key. Managing a key's lifetime doesn't really have anything to do with controlling access to that key. Expiry time is awkward since it's more about the lifetime of the content and so, in some ways goes better with WRITE permission. It can, however, be set unconditionally by a process with an appropriate authorisation token for instantiating a key, and can also be set by the key type driver when a key is instantiated, so lumping it with the access-controlling actions is probably okay. As for SEARCH permission, that currently covers: (1) Finding keys in a keyring tree during a search. (2) Permitting keyrings to be joined. (3) Invalidation. But these don't really belong together either, since these actions really need to be controlled separately. Finally, there are number of special cases to do with granting the administrator special rights to invalidate or clear keys that I would like to handle with the ACL rather than key flags and special checks. =============== WHAT IS CHANGED =============== The SETATTR permission is split to create two new permissions: (1) SET_SECURITY - which allows the key's owner, group and ACL to be changed and a restriction to be placed on a keyring. (2) REVOKE - which allows a key to be revoked. The SEARCH permission is split to create: (1) SEARCH - which allows a keyring to be search and a key to be found. (2) JOIN - which allows a keyring to be joined as a session keyring. (3) INVAL - which allows a key to be invalidated. The WRITE permission is also split to create: (1) WRITE - which allows a key's content to be altered and links to be added, removed and replaced in a keyring. (2) CLEAR - which allows a keyring to be cleared completely. This is split out to make it possible to give just this to an administrator. (3) REVOKE - see above. Keys acquire ACLs which consist of a series of ACEs, and all that apply are unioned together. An ACE specifies a subject, such as: (*) Possessor - permitted to anyone who 'possesses' a key (*) Owner - permitted to the key owner (*) Group - permitted to the key group (*) Everyone - permitted to everyone Note that 'Other' has been replaced with 'Everyone' on the assumption that you wouldn't grant a permit to 'Other' that you wouldn't also grant to everyone else. Further subjects may be made available by later patches. The ACE also specifies a permissions mask. The set of permissions is now: VIEW Can view the key metadata READ Can read the key content WRITE Can update/modify the key content SEARCH Can find the key by searching/requesting LINK Can make a link to the key SET_SECURITY Can change owner, ACL, expiry INVAL Can invalidate REVOKE Can revoke JOIN Can join this keyring CLEAR Can clear this keyring The KEYCTL_SETPERM function is then deprecated. The KEYCTL_SET_TIMEOUT function then is permitted if SET_SECURITY is set, or if the caller has a valid instantiation auth token. The KEYCTL_INVALIDATE function then requires INVAL. The KEYCTL_REVOKE function then requires REVOKE. The KEYCTL_JOIN_SESSION_KEYRING function then requires JOIN to join an existing keyring. The JOIN permission is enabled by default for session keyrings and manually created keyrings only. ====================== BACKWARD COMPATIBILITY ====================== To maintain backward compatibility, KEYCTL_SETPERM will translate the permissions mask it is given into a new ACL for a key - unless KEYCTL_SET_ACL has been called on that key, in which case an error will be returned. It will convert possessor, owner, group and other permissions into separate ACEs, if each portion of the mask is non-zero. SETATTR permission turns on all of INVAL, REVOKE and SET_SECURITY. WRITE permission turns on WRITE, REVOKE and, if a keyring, CLEAR. JOIN is turned on if a keyring is being altered. The KEYCTL_DESCRIBE function translates the ACL back into a permissions mask to return depending on possessor, owner, group and everyone ACEs. It will make the following mappings: (1) INVAL, JOIN -> SEARCH (2) SET_SECURITY -> SETATTR (3) REVOKE -> WRITE if SETATTR isn't already set (4) CLEAR -> WRITE Note that the value subsequently returned by KEYCTL_DESCRIBE may not match the value set with KEYCTL_SETATTR. ======= TESTING ======= This passes the keyutils testsuite for all but a couple of tests: (1) tests/keyctl/dh_compute/badargs: The first wrong-key-type test now returns EOPNOTSUPP rather than ENOKEY as READ permission isn't removed if the type doesn't have ->read(). You still can't actually read the key. (2) tests/keyctl/permitting/valid: The view-other-permissions test doesn't work as Other has been replaced with Everyone in the ACL. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-27 16:03:07 -06:00
KEY_NEED_SETSEC);
if (IS_ERR(key_ref)) {
ret = PTR_ERR(key_ref);
goto error;
}
key = key_ref_to_ptr(key_ref);
keys: Replace uid/gid/perm permissions checking with an ACL Replace the uid/gid/perm permissions checking on a key with an ACL to allow the SETATTR and SEARCH permissions to be split. This will also allow a greater range of subjects to represented. ============ WHY DO THIS? ============ The problem is that SETATTR and SEARCH cover a slew of actions, not all of which should be grouped together. For SETATTR, this includes actions that are about controlling access to a key: (1) Changing a key's ownership. (2) Changing a key's security information. (3) Setting a keyring's restriction. And actions that are about managing a key's lifetime: (4) Setting an expiry time. (5) Revoking a key. and (proposed) managing a key as part of a cache: (6) Invalidating a key. Managing a key's lifetime doesn't really have anything to do with controlling access to that key. Expiry time is awkward since it's more about the lifetime of the content and so, in some ways goes better with WRITE permission. It can, however, be set unconditionally by a process with an appropriate authorisation token for instantiating a key, and can also be set by the key type driver when a key is instantiated, so lumping it with the access-controlling actions is probably okay. As for SEARCH permission, that currently covers: (1) Finding keys in a keyring tree during a search. (2) Permitting keyrings to be joined. (3) Invalidation. But these don't really belong together either, since these actions really need to be controlled separately. Finally, there are number of special cases to do with granting the administrator special rights to invalidate or clear keys that I would like to handle with the ACL rather than key flags and special checks. =============== WHAT IS CHANGED =============== The SETATTR permission is split to create two new permissions: (1) SET_SECURITY - which allows the key's owner, group and ACL to be changed and a restriction to be placed on a keyring. (2) REVOKE - which allows a key to be revoked. The SEARCH permission is split to create: (1) SEARCH - which allows a keyring to be search and a key to be found. (2) JOIN - which allows a keyring to be joined as a session keyring. (3) INVAL - which allows a key to be invalidated. The WRITE permission is also split to create: (1) WRITE - which allows a key's content to be altered and links to be added, removed and replaced in a keyring. (2) CLEAR - which allows a keyring to be cleared completely. This is split out to make it possible to give just this to an administrator. (3) REVOKE - see above. Keys acquire ACLs which consist of a series of ACEs, and all that apply are unioned together. An ACE specifies a subject, such as: (*) Possessor - permitted to anyone who 'possesses' a key (*) Owner - permitted to the key owner (*) Group - permitted to the key group (*) Everyone - permitted to everyone Note that 'Other' has been replaced with 'Everyone' on the assumption that you wouldn't grant a permit to 'Other' that you wouldn't also grant to everyone else. Further subjects may be made available by later patches. The ACE also specifies a permissions mask. The set of permissions is now: VIEW Can view the key metadata READ Can read the key content WRITE Can update/modify the key content SEARCH Can find the key by searching/requesting LINK Can make a link to the key SET_SECURITY Can change owner, ACL, expiry INVAL Can invalidate REVOKE Can revoke JOIN Can join this keyring CLEAR Can clear this keyring The KEYCTL_SETPERM function is then deprecated. The KEYCTL_SET_TIMEOUT function then is permitted if SET_SECURITY is set, or if the caller has a valid instantiation auth token. The KEYCTL_INVALIDATE function then requires INVAL. The KEYCTL_REVOKE function then requires REVOKE. The KEYCTL_JOIN_SESSION_KEYRING function then requires JOIN to join an existing keyring. The JOIN permission is enabled by default for session keyrings and manually created keyrings only. ====================== BACKWARD COMPATIBILITY ====================== To maintain backward compatibility, KEYCTL_SETPERM will translate the permissions mask it is given into a new ACL for a key - unless KEYCTL_SET_ACL has been called on that key, in which case an error will be returned. It will convert possessor, owner, group and other permissions into separate ACEs, if each portion of the mask is non-zero. SETATTR permission turns on all of INVAL, REVOKE and SET_SECURITY. WRITE permission turns on WRITE, REVOKE and, if a keyring, CLEAR. JOIN is turned on if a keyring is being altered. The KEYCTL_DESCRIBE function translates the ACL back into a permissions mask to return depending on possessor, owner, group and everyone ACEs. It will make the following mappings: (1) INVAL, JOIN -> SEARCH (2) SET_SECURITY -> SETATTR (3) REVOKE -> WRITE if SETATTR isn't already set (4) CLEAR -> WRITE Note that the value subsequently returned by KEYCTL_DESCRIBE may not match the value set with KEYCTL_SETATTR. ======= TESTING ======= This passes the keyutils testsuite for all but a couple of tests: (1) tests/keyctl/dh_compute/badargs: The first wrong-key-type test now returns EOPNOTSUPP rather than ENOKEY as READ permission isn't removed if the type doesn't have ->read(). You still can't actually read the key. (2) tests/keyctl/permitting/valid: The view-other-permissions test doesn't work as Other has been replaced with Everyone in the ACL. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-27 16:03:07 -06:00
ret = -EOPNOTSUPP;
if (test_bit(KEY_FLAG_HAS_ACL, &key->flags))
goto error_key;
keys: Replace uid/gid/perm permissions checking with an ACL Replace the uid/gid/perm permissions checking on a key with an ACL to allow the SETATTR and SEARCH permissions to be split. This will also allow a greater range of subjects to represented. ============ WHY DO THIS? ============ The problem is that SETATTR and SEARCH cover a slew of actions, not all of which should be grouped together. For SETATTR, this includes actions that are about controlling access to a key: (1) Changing a key's ownership. (2) Changing a key's security information. (3) Setting a keyring's restriction. And actions that are about managing a key's lifetime: (4) Setting an expiry time. (5) Revoking a key. and (proposed) managing a key as part of a cache: (6) Invalidating a key. Managing a key's lifetime doesn't really have anything to do with controlling access to that key. Expiry time is awkward since it's more about the lifetime of the content and so, in some ways goes better with WRITE permission. It can, however, be set unconditionally by a process with an appropriate authorisation token for instantiating a key, and can also be set by the key type driver when a key is instantiated, so lumping it with the access-controlling actions is probably okay. As for SEARCH permission, that currently covers: (1) Finding keys in a keyring tree during a search. (2) Permitting keyrings to be joined. (3) Invalidation. But these don't really belong together either, since these actions really need to be controlled separately. Finally, there are number of special cases to do with granting the administrator special rights to invalidate or clear keys that I would like to handle with the ACL rather than key flags and special checks. =============== WHAT IS CHANGED =============== The SETATTR permission is split to create two new permissions: (1) SET_SECURITY - which allows the key's owner, group and ACL to be changed and a restriction to be placed on a keyring. (2) REVOKE - which allows a key to be revoked. The SEARCH permission is split to create: (1) SEARCH - which allows a keyring to be search and a key to be found. (2) JOIN - which allows a keyring to be joined as a session keyring. (3) INVAL - which allows a key to be invalidated. The WRITE permission is also split to create: (1) WRITE - which allows a key's content to be altered and links to be added, removed and replaced in a keyring. (2) CLEAR - which allows a keyring to be cleared completely. This is split out to make it possible to give just this to an administrator. (3) REVOKE - see above. Keys acquire ACLs which consist of a series of ACEs, and all that apply are unioned together. An ACE specifies a subject, such as: (*) Possessor - permitted to anyone who 'possesses' a key (*) Owner - permitted to the key owner (*) Group - permitted to the key group (*) Everyone - permitted to everyone Note that 'Other' has been replaced with 'Everyone' on the assumption that you wouldn't grant a permit to 'Other' that you wouldn't also grant to everyone else. Further subjects may be made available by later patches. The ACE also specifies a permissions mask. The set of permissions is now: VIEW Can view the key metadata READ Can read the key content WRITE Can update/modify the key content SEARCH Can find the key by searching/requesting LINK Can make a link to the key SET_SECURITY Can change owner, ACL, expiry INVAL Can invalidate REVOKE Can revoke JOIN Can join this keyring CLEAR Can clear this keyring The KEYCTL_SETPERM function is then deprecated. The KEYCTL_SET_TIMEOUT function then is permitted if SET_SECURITY is set, or if the caller has a valid instantiation auth token. The KEYCTL_INVALIDATE function then requires INVAL. The KEYCTL_REVOKE function then requires REVOKE. The KEYCTL_JOIN_SESSION_KEYRING function then requires JOIN to join an existing keyring. The JOIN permission is enabled by default for session keyrings and manually created keyrings only. ====================== BACKWARD COMPATIBILITY ====================== To maintain backward compatibility, KEYCTL_SETPERM will translate the permissions mask it is given into a new ACL for a key - unless KEYCTL_SET_ACL has been called on that key, in which case an error will be returned. It will convert possessor, owner, group and other permissions into separate ACEs, if each portion of the mask is non-zero. SETATTR permission turns on all of INVAL, REVOKE and SET_SECURITY. WRITE permission turns on WRITE, REVOKE and, if a keyring, CLEAR. JOIN is turned on if a keyring is being altered. The KEYCTL_DESCRIBE function translates the ACL back into a permissions mask to return depending on possessor, owner, group and everyone ACEs. It will make the following mappings: (1) INVAL, JOIN -> SEARCH (2) SET_SECURITY -> SETATTR (3) REVOKE -> WRITE if SETATTR isn't already set (4) CLEAR -> WRITE Note that the value subsequently returned by KEYCTL_DESCRIBE may not match the value set with KEYCTL_SETATTR. ======= TESTING ======= This passes the keyutils testsuite for all but a couple of tests: (1) tests/keyctl/dh_compute/badargs: The first wrong-key-type test now returns EOPNOTSUPP rather than ENOKEY as READ permission isn't removed if the type doesn't have ->read(). You still can't actually read the key. (2) tests/keyctl/permitting/valid: The view-other-permissions test doesn't work as Other has been replaced with Everyone in the ACL. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-27 16:03:07 -06:00
ret = -ENOMEM;
acl = kzalloc(struct_size(acl, aces, nr), GFP_KERNEL);
if (!acl)
goto error_key;
refcount_set(&acl->usage, 1);
acl->nr_ace = nr;
j = 0;
for (i = 0; i < 4; i++) {
struct key_ace *ace = &acl->aces[j];
unsigned int subset = (perm >> (i * 8)) & KEY_OTH_ALL;
if (!subset)
continue;
ace->type = KEY_ACE_SUBJ_STANDARD;
ace->subject_id = KEY_ACE_EVERYONE + i;
ace->perm = subset;
if (subset & (KEY_OTH_WRITE | KEY_OTH_SETATTR))
ace->perm |= KEY_ACE_REVOKE;
if (subset & KEY_OTH_SEARCH)
ace->perm |= KEY_ACE_INVAL;
if (key->type == &key_type_keyring) {
if (subset & KEY_OTH_SEARCH)
ace->perm |= KEY_ACE_JOIN;
if (subset & KEY_OTH_WRITE)
ace->perm |= KEY_ACE_CLEAR;
}
j++;
[PATCH] keys: Discard key spinlock and use RCU for key payload The attached patch changes the key implementation in a number of ways: (1) It removes the spinlock from the key structure. (2) The key flags are now accessed using atomic bitops instead of write-locking the key spinlock and using C bitwise operators. The three instantiation flags are dealt with with the construction semaphore held during the request_key/instantiate/negate sequence, thus rendering the spinlock superfluous. The key flags are also now bit numbers not bit masks. (3) The key payload is now accessed using RCU. This permits the recursive keyring search algorithm to be simplified greatly since no locks need be taken other than the usual RCU preemption disablement. Searching now does not require any locks or semaphores to be held; merely that the starting keyring be pinned. (4) The keyring payload now includes an RCU head so that it can be disposed of by call_rcu(). This requires that the payload be copied on unlink to prevent introducing races in copy-down vs search-up. (5) The user key payload is now a structure with the data following it. It includes an RCU head like the keyring payload and for the same reason. It also contains a data length because the data length in the key may be changed on another CPU whilst an RCU protected read is in progress on the payload. This would then see the supposed RCU payload and the on-key data length getting out of sync. I'm tempted to drop the key's datalen entirely, except that it's used in conjunction with quota management and so is a little tricky to get rid of. (6) Update the keys documentation. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 23:00:49 -06:00
}
keys: Replace uid/gid/perm permissions checking with an ACL Replace the uid/gid/perm permissions checking on a key with an ACL to allow the SETATTR and SEARCH permissions to be split. This will also allow a greater range of subjects to represented. ============ WHY DO THIS? ============ The problem is that SETATTR and SEARCH cover a slew of actions, not all of which should be grouped together. For SETATTR, this includes actions that are about controlling access to a key: (1) Changing a key's ownership. (2) Changing a key's security information. (3) Setting a keyring's restriction. And actions that are about managing a key's lifetime: (4) Setting an expiry time. (5) Revoking a key. and (proposed) managing a key as part of a cache: (6) Invalidating a key. Managing a key's lifetime doesn't really have anything to do with controlling access to that key. Expiry time is awkward since it's more about the lifetime of the content and so, in some ways goes better with WRITE permission. It can, however, be set unconditionally by a process with an appropriate authorisation token for instantiating a key, and can also be set by the key type driver when a key is instantiated, so lumping it with the access-controlling actions is probably okay. As for SEARCH permission, that currently covers: (1) Finding keys in a keyring tree during a search. (2) Permitting keyrings to be joined. (3) Invalidation. But these don't really belong together either, since these actions really need to be controlled separately. Finally, there are number of special cases to do with granting the administrator special rights to invalidate or clear keys that I would like to handle with the ACL rather than key flags and special checks. =============== WHAT IS CHANGED =============== The SETATTR permission is split to create two new permissions: (1) SET_SECURITY - which allows the key's owner, group and ACL to be changed and a restriction to be placed on a keyring. (2) REVOKE - which allows a key to be revoked. The SEARCH permission is split to create: (1) SEARCH - which allows a keyring to be search and a key to be found. (2) JOIN - which allows a keyring to be joined as a session keyring. (3) INVAL - which allows a key to be invalidated. The WRITE permission is also split to create: (1) WRITE - which allows a key's content to be altered and links to be added, removed and replaced in a keyring. (2) CLEAR - which allows a keyring to be cleared completely. This is split out to make it possible to give just this to an administrator. (3) REVOKE - see above. Keys acquire ACLs which consist of a series of ACEs, and all that apply are unioned together. An ACE specifies a subject, such as: (*) Possessor - permitted to anyone who 'possesses' a key (*) Owner - permitted to the key owner (*) Group - permitted to the key group (*) Everyone - permitted to everyone Note that 'Other' has been replaced with 'Everyone' on the assumption that you wouldn't grant a permit to 'Other' that you wouldn't also grant to everyone else. Further subjects may be made available by later patches. The ACE also specifies a permissions mask. The set of permissions is now: VIEW Can view the key metadata READ Can read the key content WRITE Can update/modify the key content SEARCH Can find the key by searching/requesting LINK Can make a link to the key SET_SECURITY Can change owner, ACL, expiry INVAL Can invalidate REVOKE Can revoke JOIN Can join this keyring CLEAR Can clear this keyring The KEYCTL_SETPERM function is then deprecated. The KEYCTL_SET_TIMEOUT function then is permitted if SET_SECURITY is set, or if the caller has a valid instantiation auth token. The KEYCTL_INVALIDATE function then requires INVAL. The KEYCTL_REVOKE function then requires REVOKE. The KEYCTL_JOIN_SESSION_KEYRING function then requires JOIN to join an existing keyring. The JOIN permission is enabled by default for session keyrings and manually created keyrings only. ====================== BACKWARD COMPATIBILITY ====================== To maintain backward compatibility, KEYCTL_SETPERM will translate the permissions mask it is given into a new ACL for a key - unless KEYCTL_SET_ACL has been called on that key, in which case an error will be returned. It will convert possessor, owner, group and other permissions into separate ACEs, if each portion of the mask is non-zero. SETATTR permission turns on all of INVAL, REVOKE and SET_SECURITY. WRITE permission turns on WRITE, REVOKE and, if a keyring, CLEAR. JOIN is turned on if a keyring is being altered. The KEYCTL_DESCRIBE function translates the ACL back into a permissions mask to return depending on possessor, owner, group and everyone ACEs. It will make the following mappings: (1) INVAL, JOIN -> SEARCH (2) SET_SECURITY -> SETATTR (3) REVOKE -> WRITE if SETATTR isn't already set (4) CLEAR -> WRITE Note that the value subsequently returned by KEYCTL_DESCRIBE may not match the value set with KEYCTL_SETATTR. ======= TESTING ======= This passes the keyutils testsuite for all but a couple of tests: (1) tests/keyctl/dh_compute/badargs: The first wrong-key-type test now returns EOPNOTSUPP rather than ENOKEY as READ permission isn't removed if the type doesn't have ->read(). You still can't actually read the key. (2) tests/keyctl/permitting/valid: The view-other-permissions test doesn't work as Other has been replaced with Everyone in the ACL. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-27 16:03:07 -06:00
/* make the changes with the locks held to prevent chown/chmod races */
down_write(&key->sem);
ret = key_set_acl(key, acl);
up_write(&key->sem);
keys: Replace uid/gid/perm permissions checking with an ACL Replace the uid/gid/perm permissions checking on a key with an ACL to allow the SETATTR and SEARCH permissions to be split. This will also allow a greater range of subjects to represented. ============ WHY DO THIS? ============ The problem is that SETATTR and SEARCH cover a slew of actions, not all of which should be grouped together. For SETATTR, this includes actions that are about controlling access to a key: (1) Changing a key's ownership. (2) Changing a key's security information. (3) Setting a keyring's restriction. And actions that are about managing a key's lifetime: (4) Setting an expiry time. (5) Revoking a key. and (proposed) managing a key as part of a cache: (6) Invalidating a key. Managing a key's lifetime doesn't really have anything to do with controlling access to that key. Expiry time is awkward since it's more about the lifetime of the content and so, in some ways goes better with WRITE permission. It can, however, be set unconditionally by a process with an appropriate authorisation token for instantiating a key, and can also be set by the key type driver when a key is instantiated, so lumping it with the access-controlling actions is probably okay. As for SEARCH permission, that currently covers: (1) Finding keys in a keyring tree during a search. (2) Permitting keyrings to be joined. (3) Invalidation. But these don't really belong together either, since these actions really need to be controlled separately. Finally, there are number of special cases to do with granting the administrator special rights to invalidate or clear keys that I would like to handle with the ACL rather than key flags and special checks. =============== WHAT IS CHANGED =============== The SETATTR permission is split to create two new permissions: (1) SET_SECURITY - which allows the key's owner, group and ACL to be changed and a restriction to be placed on a keyring. (2) REVOKE - which allows a key to be revoked. The SEARCH permission is split to create: (1) SEARCH - which allows a keyring to be search and a key to be found. (2) JOIN - which allows a keyring to be joined as a session keyring. (3) INVAL - which allows a key to be invalidated. The WRITE permission is also split to create: (1) WRITE - which allows a key's content to be altered and links to be added, removed and replaced in a keyring. (2) CLEAR - which allows a keyring to be cleared completely. This is split out to make it possible to give just this to an administrator. (3) REVOKE - see above. Keys acquire ACLs which consist of a series of ACEs, and all that apply are unioned together. An ACE specifies a subject, such as: (*) Possessor - permitted to anyone who 'possesses' a key (*) Owner - permitted to the key owner (*) Group - permitted to the key group (*) Everyone - permitted to everyone Note that 'Other' has been replaced with 'Everyone' on the assumption that you wouldn't grant a permit to 'Other' that you wouldn't also grant to everyone else. Further subjects may be made available by later patches. The ACE also specifies a permissions mask. The set of permissions is now: VIEW Can view the key metadata READ Can read the key content WRITE Can update/modify the key content SEARCH Can find the key by searching/requesting LINK Can make a link to the key SET_SECURITY Can change owner, ACL, expiry INVAL Can invalidate REVOKE Can revoke JOIN Can join this keyring CLEAR Can clear this keyring The KEYCTL_SETPERM function is then deprecated. The KEYCTL_SET_TIMEOUT function then is permitted if SET_SECURITY is set, or if the caller has a valid instantiation auth token. The KEYCTL_INVALIDATE function then requires INVAL. The KEYCTL_REVOKE function then requires REVOKE. The KEYCTL_JOIN_SESSION_KEYRING function then requires JOIN to join an existing keyring. The JOIN permission is enabled by default for session keyrings and manually created keyrings only. ====================== BACKWARD COMPATIBILITY ====================== To maintain backward compatibility, KEYCTL_SETPERM will translate the permissions mask it is given into a new ACL for a key - unless KEYCTL_SET_ACL has been called on that key, in which case an error will be returned. It will convert possessor, owner, group and other permissions into separate ACEs, if each portion of the mask is non-zero. SETATTR permission turns on all of INVAL, REVOKE and SET_SECURITY. WRITE permission turns on WRITE, REVOKE and, if a keyring, CLEAR. JOIN is turned on if a keyring is being altered. The KEYCTL_DESCRIBE function translates the ACL back into a permissions mask to return depending on possessor, owner, group and everyone ACEs. It will make the following mappings: (1) INVAL, JOIN -> SEARCH (2) SET_SECURITY -> SETATTR (3) REVOKE -> WRITE if SETATTR isn't already set (4) CLEAR -> WRITE Note that the value subsequently returned by KEYCTL_DESCRIBE may not match the value set with KEYCTL_SETATTR. ======= TESTING ======= This passes the keyutils testsuite for all but a couple of tests: (1) tests/keyctl/dh_compute/badargs: The first wrong-key-type test now returns EOPNOTSUPP rather than ENOKEY as READ permission isn't removed if the type doesn't have ->read(). You still can't actually read the key. (2) tests/keyctl/permitting/valid: The view-other-permissions test doesn't work as Other has been replaced with Everyone in the ACL. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-27 16:03:07 -06:00
error_key:
key_put(key);
[PATCH] keys: Discard key spinlock and use RCU for key payload The attached patch changes the key implementation in a number of ways: (1) It removes the spinlock from the key structure. (2) The key flags are now accessed using atomic bitops instead of write-locking the key spinlock and using C bitwise operators. The three instantiation flags are dealt with with the construction semaphore held during the request_key/instantiate/negate sequence, thus rendering the spinlock superfluous. The key flags are also now bit numbers not bit masks. (3) The key payload is now accessed using RCU. This permits the recursive keyring search algorithm to be simplified greatly since no locks need be taken other than the usual RCU preemption disablement. Searching now does not require any locks or semaphores to be held; merely that the starting keyring be pinned. (4) The keyring payload now includes an RCU head so that it can be disposed of by call_rcu(). This requires that the payload be copied on unlink to prevent introducing races in copy-down vs search-up. (5) The user key payload is now a structure with the data following it. It includes an RCU head like the keyring payload and for the same reason. It also contains a data length because the data length in the key may be changed on another CPU whilst an RCU protected read is in progress on the payload. This would then see the supposed RCU payload and the on-key data length getting out of sync. I'm tempted to drop the key's datalen entirely, except that it's used in conjunction with quota management and so is a little tricky to get rid of. (6) Update the keys documentation. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 23:00:49 -06:00
error:
return ret;
}
KEYS: Alter use of key instantiation link-to-keyring argument Alter the use of the key instantiation and negation functions' link-to-keyring arguments. Currently this specifies a keyring in the target process to link the key into, creating the keyring if it doesn't exist. This, however, can be a problem for copy-on-write credentials as it means that the instantiating process can alter the credentials of the requesting process. This patch alters the behaviour such that: (1) If keyctl_instantiate_key() or keyctl_negate_key() are given a specific keyring by ID (ringid >= 0), then that keyring will be used. (2) If keyctl_instantiate_key() or keyctl_negate_key() are given one of the special constants that refer to the requesting process's keyrings (KEY_SPEC_*_KEYRING, all <= 0), then: (a) If sys_request_key() was given a keyring to use (destringid) then the key will be attached to that keyring. (b) If sys_request_key() was given a NULL keyring, then the key being instantiated will be attached to the default keyring as set by keyctl_set_reqkey_keyring(). (3) No extra link will be made. Decision point (1) follows current behaviour, and allows those instantiators who've searched for a specifically named keyring in the requestor's keyring so as to partition the keys by type to still have their named keyrings. Decision point (2) allows the requestor to make sure that the key or keys that get produced by request_key() go where they want, whilst allowing the instantiator to request that the key is retained. This is mainly useful for situations where the instantiator makes a secondary request, the key for which should be retained by the initial requestor: +-----------+ +--------------+ +--------------+ | | | | | | | Requestor |------->| Instantiator |------->| Instantiator | | | | | | | +-----------+ +--------------+ +--------------+ request_key() request_key() This might be useful, for example, in Kerberos, where the requestor requests a ticket, and then the ticket instantiator requests the TGT, which someone else then has to go and fetch. The TGT, however, should be retained in the keyrings of the requestor, not the first instantiator. To make this explict an extra special keyring constant is also added. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <jmorris@namei.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 16:39:14 -07:00
/*
* Get the destination keyring for instantiation and check that the caller has
* Write permission on it.
KEYS: Alter use of key instantiation link-to-keyring argument Alter the use of the key instantiation and negation functions' link-to-keyring arguments. Currently this specifies a keyring in the target process to link the key into, creating the keyring if it doesn't exist. This, however, can be a problem for copy-on-write credentials as it means that the instantiating process can alter the credentials of the requesting process. This patch alters the behaviour such that: (1) If keyctl_instantiate_key() or keyctl_negate_key() are given a specific keyring by ID (ringid >= 0), then that keyring will be used. (2) If keyctl_instantiate_key() or keyctl_negate_key() are given one of the special constants that refer to the requesting process's keyrings (KEY_SPEC_*_KEYRING, all <= 0), then: (a) If sys_request_key() was given a keyring to use (destringid) then the key will be attached to that keyring. (b) If sys_request_key() was given a NULL keyring, then the key being instantiated will be attached to the default keyring as set by keyctl_set_reqkey_keyring(). (3) No extra link will be made. Decision point (1) follows current behaviour, and allows those instantiators who've searched for a specifically named keyring in the requestor's keyring so as to partition the keys by type to still have their named keyrings. Decision point (2) allows the requestor to make sure that the key or keys that get produced by request_key() go where they want, whilst allowing the instantiator to request that the key is retained. This is mainly useful for situations where the instantiator makes a secondary request, the key for which should be retained by the initial requestor: +-----------+ +--------------+ +--------------+ | | | | | | | Requestor |------->| Instantiator |------->| Instantiator | | | | | | | +-----------+ +--------------+ +--------------+ request_key() request_key() This might be useful, for example, in Kerberos, where the requestor requests a ticket, and then the ticket instantiator requests the TGT, which someone else then has to go and fetch. The TGT, however, should be retained in the keyrings of the requestor, not the first instantiator. To make this explict an extra special keyring constant is also added. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <jmorris@namei.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 16:39:14 -07:00
*/
static long get_instantiation_keyring(key_serial_t ringid,
struct request_key_auth *rka,
struct key **_dest_keyring)
{
key_ref_t dkref;
*_dest_keyring = NULL;
KEYS: Alter use of key instantiation link-to-keyring argument Alter the use of the key instantiation and negation functions' link-to-keyring arguments. Currently this specifies a keyring in the target process to link the key into, creating the keyring if it doesn't exist. This, however, can be a problem for copy-on-write credentials as it means that the instantiating process can alter the credentials of the requesting process. This patch alters the behaviour such that: (1) If keyctl_instantiate_key() or keyctl_negate_key() are given a specific keyring by ID (ringid >= 0), then that keyring will be used. (2) If keyctl_instantiate_key() or keyctl_negate_key() are given one of the special constants that refer to the requesting process's keyrings (KEY_SPEC_*_KEYRING, all <= 0), then: (a) If sys_request_key() was given a keyring to use (destringid) then the key will be attached to that keyring. (b) If sys_request_key() was given a NULL keyring, then the key being instantiated will be attached to the default keyring as set by keyctl_set_reqkey_keyring(). (3) No extra link will be made. Decision point (1) follows current behaviour, and allows those instantiators who've searched for a specifically named keyring in the requestor's keyring so as to partition the keys by type to still have their named keyrings. Decision point (2) allows the requestor to make sure that the key or keys that get produced by request_key() go where they want, whilst allowing the instantiator to request that the key is retained. This is mainly useful for situations where the instantiator makes a secondary request, the key for which should be retained by the initial requestor: +-----------+ +--------------+ +--------------+ | | | | | | | Requestor |------->| Instantiator |------->| Instantiator | | | | | | | +-----------+ +--------------+ +--------------+ request_key() request_key() This might be useful, for example, in Kerberos, where the requestor requests a ticket, and then the ticket instantiator requests the TGT, which someone else then has to go and fetch. The TGT, however, should be retained in the keyrings of the requestor, not the first instantiator. To make this explict an extra special keyring constant is also added. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <jmorris@namei.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 16:39:14 -07:00
/* just return a NULL pointer if we weren't asked to make a link */
if (ringid == 0)
KEYS: Alter use of key instantiation link-to-keyring argument Alter the use of the key instantiation and negation functions' link-to-keyring arguments. Currently this specifies a keyring in the target process to link the key into, creating the keyring if it doesn't exist. This, however, can be a problem for copy-on-write credentials as it means that the instantiating process can alter the credentials of the requesting process. This patch alters the behaviour such that: (1) If keyctl_instantiate_key() or keyctl_negate_key() are given a specific keyring by ID (ringid >= 0), then that keyring will be used. (2) If keyctl_instantiate_key() or keyctl_negate_key() are given one of the special constants that refer to the requesting process's keyrings (KEY_SPEC_*_KEYRING, all <= 0), then: (a) If sys_request_key() was given a keyring to use (destringid) then the key will be attached to that keyring. (b) If sys_request_key() was given a NULL keyring, then the key being instantiated will be attached to the default keyring as set by keyctl_set_reqkey_keyring(). (3) No extra link will be made. Decision point (1) follows current behaviour, and allows those instantiators who've searched for a specifically named keyring in the requestor's keyring so as to partition the keys by type to still have their named keyrings. Decision point (2) allows the requestor to make sure that the key or keys that get produced by request_key() go where they want, whilst allowing the instantiator to request that the key is retained. This is mainly useful for situations where the instantiator makes a secondary request, the key for which should be retained by the initial requestor: +-----------+ +--------------+ +--------------+ | | | | | | | Requestor |------->| Instantiator |------->| Instantiator | | | | | | | +-----------+ +--------------+ +--------------+ request_key() request_key() This might be useful, for example, in Kerberos, where the requestor requests a ticket, and then the ticket instantiator requests the TGT, which someone else then has to go and fetch. The TGT, however, should be retained in the keyrings of the requestor, not the first instantiator. To make this explict an extra special keyring constant is also added. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <jmorris@namei.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 16:39:14 -07:00
return 0;
/* if a specific keyring is nominated by ID, then use that */
if (ringid > 0) {
dkref = lookup_user_key(ringid, KEY_LOOKUP_CREATE, KEY_NEED_WRITE);
KEYS: Alter use of key instantiation link-to-keyring argument Alter the use of the key instantiation and negation functions' link-to-keyring arguments. Currently this specifies a keyring in the target process to link the key into, creating the keyring if it doesn't exist. This, however, can be a problem for copy-on-write credentials as it means that the instantiating process can alter the credentials of the requesting process. This patch alters the behaviour such that: (1) If keyctl_instantiate_key() or keyctl_negate_key() are given a specific keyring by ID (ringid >= 0), then that keyring will be used. (2) If keyctl_instantiate_key() or keyctl_negate_key() are given one of the special constants that refer to the requesting process's keyrings (KEY_SPEC_*_KEYRING, all <= 0), then: (a) If sys_request_key() was given a keyring to use (destringid) then the key will be attached to that keyring. (b) If sys_request_key() was given a NULL keyring, then the key being instantiated will be attached to the default keyring as set by keyctl_set_reqkey_keyring(). (3) No extra link will be made. Decision point (1) follows current behaviour, and allows those instantiators who've searched for a specifically named keyring in the requestor's keyring so as to partition the keys by type to still have their named keyrings. Decision point (2) allows the requestor to make sure that the key or keys that get produced by request_key() go where they want, whilst allowing the instantiator to request that the key is retained. This is mainly useful for situations where the instantiator makes a secondary request, the key for which should be retained by the initial requestor: +-----------+ +--------------+ +--------------+ | | | | | | | Requestor |------->| Instantiator |------->| Instantiator | | | | | | | +-----------+ +--------------+ +--------------+ request_key() request_key() This might be useful, for example, in Kerberos, where the requestor requests a ticket, and then the ticket instantiator requests the TGT, which someone else then has to go and fetch. The TGT, however, should be retained in the keyrings of the requestor, not the first instantiator. To make this explict an extra special keyring constant is also added. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <jmorris@namei.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 16:39:14 -07:00
if (IS_ERR(dkref))
return PTR_ERR(dkref);
*_dest_keyring = key_ref_to_ptr(dkref);
return 0;
}
if (ringid == KEY_SPEC_REQKEY_AUTH_KEY)
return -EINVAL;
/* otherwise specify the destination keyring recorded in the
* authorisation key (any KEY_SPEC_*_KEYRING) */
if (ringid >= KEY_SPEC_REQUESTOR_KEYRING) {
KEYS: get_instantiation_keyring() should inc the keyring refcount in all cases The destination keyring specified to request_key() and co. is made available to the process that instantiates the key (the slave process started by /sbin/request-key typically). This is passed in the request_key_auth struct as the dest_keyring member. keyctl_instantiate_key and keyctl_negate_key() call get_instantiation_keyring() to get the keyring to attach the newly constructed key to at the end of instantiation. This may be given a specific keyring into which a link will be made later, or it may be asked to find the keyring passed to request_key(). In the former case, it returns a keyring with the refcount incremented by lookup_user_key(); in the latter case, it returns the keyring from the request_key_auth struct - and does _not_ increment the refcount. The latter case will eventually result in an oops when the keyring prematurely runs out of references and gets destroyed. The effect may take some time to show up as the key is destroyed lazily. To fix this, the keyring returned by get_instantiation_keyring() must always have its refcount incremented, no matter where it comes from. This can be tested by setting /etc/request-key.conf to: #OP TYPE DESCRIPTION CALLOUT INFO PROGRAM ARG1 ARG2 ARG3 ... #====== ======= =============== =============== =============================== create * test:* * |/bin/false %u %g %d %{user:_display} negate * * * /bin/keyctl negate %k 10 @u and then doing: keyctl add user _display aaaaaaaa @u while keyctl request2 user test:x test:x @u && keyctl list @u; do keyctl request2 user test:x test:x @u; sleep 31; keyctl list @u; done which will oops eventually. Changing the negate line to have @u rather than %S at the end is important as that forces the latter case by passing a special keyring ID rather than an actual keyring ID. Reported-by: Alexander Zangerl <az@bond.edu.au> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Alexander Zangerl <az@bond.edu.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-15 03:14:35 -06:00
*_dest_keyring = key_get(rka->dest_keyring);
KEYS: Alter use of key instantiation link-to-keyring argument Alter the use of the key instantiation and negation functions' link-to-keyring arguments. Currently this specifies a keyring in the target process to link the key into, creating the keyring if it doesn't exist. This, however, can be a problem for copy-on-write credentials as it means that the instantiating process can alter the credentials of the requesting process. This patch alters the behaviour such that: (1) If keyctl_instantiate_key() or keyctl_negate_key() are given a specific keyring by ID (ringid >= 0), then that keyring will be used. (2) If keyctl_instantiate_key() or keyctl_negate_key() are given one of the special constants that refer to the requesting process's keyrings (KEY_SPEC_*_KEYRING, all <= 0), then: (a) If sys_request_key() was given a keyring to use (destringid) then the key will be attached to that keyring. (b) If sys_request_key() was given a NULL keyring, then the key being instantiated will be attached to the default keyring as set by keyctl_set_reqkey_keyring(). (3) No extra link will be made. Decision point (1) follows current behaviour, and allows those instantiators who've searched for a specifically named keyring in the requestor's keyring so as to partition the keys by type to still have their named keyrings. Decision point (2) allows the requestor to make sure that the key or keys that get produced by request_key() go where they want, whilst allowing the instantiator to request that the key is retained. This is mainly useful for situations where the instantiator makes a secondary request, the key for which should be retained by the initial requestor: +-----------+ +--------------+ +--------------+ | | | | | | | Requestor |------->| Instantiator |------->| Instantiator | | | | | | | +-----------+ +--------------+ +--------------+ request_key() request_key() This might be useful, for example, in Kerberos, where the requestor requests a ticket, and then the ticket instantiator requests the TGT, which someone else then has to go and fetch. The TGT, however, should be retained in the keyrings of the requestor, not the first instantiator. To make this explict an extra special keyring constant is also added. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <jmorris@namei.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 16:39:14 -07:00
return 0;
}
return -ENOKEY;
}
CRED: Inaugurate COW credentials Inaugurate copy-on-write credentials management. This uses RCU to manage the credentials pointer in the task_struct with respect to accesses by other tasks. A process may only modify its own credentials, and so does not need locking to access or modify its own credentials. A mutex (cred_replace_mutex) is added to the task_struct to control the effect of PTRACE_ATTACHED on credential calculations, particularly with respect to execve(). With this patch, the contents of an active credentials struct may not be changed directly; rather a new set of credentials must be prepared, modified and committed using something like the following sequence of events: struct cred *new = prepare_creds(); int ret = blah(new); if (ret < 0) { abort_creds(new); return ret; } return commit_creds(new); There are some exceptions to this rule: the keyrings pointed to by the active credentials may be instantiated - keyrings violate the COW rule as managing COW keyrings is tricky, given that it is possible for a task to directly alter the keys in a keyring in use by another task. To help enforce this, various pointers to sets of credentials, such as those in the task_struct, are declared const. The purpose of this is compile-time discouragement of altering credentials through those pointers. Once a set of credentials has been made public through one of these pointers, it may not be modified, except under special circumstances: (1) Its reference count may incremented and decremented. (2) The keyrings to which it points may be modified, but not replaced. The only safe way to modify anything else is to create a replacement and commit using the functions described in Documentation/credentials.txt (which will be added by a later patch). This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). This now prepares and commits credentials in various places in the security code rather than altering the current creds directly. (2) Temporary credential overrides. do_coredump() and sys_faccessat() now prepare their own credentials and temporarily override the ones currently on the acting thread, whilst preventing interference from other threads by holding cred_replace_mutex on the thread being dumped. This will be replaced in a future patch by something that hands down the credentials directly to the functions being called, rather than altering the task's objective credentials. (3) LSM interface. A number of functions have been changed, added or removed: (*) security_capset_check(), ->capset_check() (*) security_capset_set(), ->capset_set() Removed in favour of security_capset(). (*) security_capset(), ->capset() New. This is passed a pointer to the new creds, a pointer to the old creds and the proposed capability sets. It should fill in the new creds or return an error. All pointers, barring the pointer to the new creds, are now const. (*) security_bprm_apply_creds(), ->bprm_apply_creds() Changed; now returns a value, which will cause the process to be killed if it's an error. (*) security_task_alloc(), ->task_alloc_security() Removed in favour of security_prepare_creds(). (*) security_cred_free(), ->cred_free() New. Free security data attached to cred->security. (*) security_prepare_creds(), ->cred_prepare() New. Duplicate any security data attached to cred->security. (*) security_commit_creds(), ->cred_commit() New. Apply any security effects for the upcoming installation of new security by commit_creds(). (*) security_task_post_setuid(), ->task_post_setuid() Removed in favour of security_task_fix_setuid(). (*) security_task_fix_setuid(), ->task_fix_setuid() Fix up the proposed new credentials for setuid(). This is used by cap_set_fix_setuid() to implicitly adjust capabilities in line with setuid() changes. Changes are made to the new credentials, rather than the task itself as in security_task_post_setuid(). (*) security_task_reparent_to_init(), ->task_reparent_to_init() Removed. Instead the task being reparented to init is referred directly to init's credentials. NOTE! This results in the loss of some state: SELinux's osid no longer records the sid of the thread that forked it. (*) security_key_alloc(), ->key_alloc() (*) security_key_permission(), ->key_permission() Changed. These now take cred pointers rather than task pointers to refer to the security context. (4) sys_capset(). This has been simplified and uses less locking. The LSM functions it calls have been merged. (5) reparent_to_kthreadd(). This gives the current thread the same credentials as init by simply using commit_thread() to point that way. (6) __sigqueue_alloc() and switch_uid() __sigqueue_alloc() can't stop the target task from changing its creds beneath it, so this function gets a reference to the currently applicable user_struct which it then passes into the sigqueue struct it returns if successful. switch_uid() is now called from commit_creds(), and possibly should be folded into that. commit_creds() should take care of protecting __sigqueue_alloc(). (7) [sg]et[ug]id() and co and [sg]et_current_groups. The set functions now all use prepare_creds(), commit_creds() and abort_creds() to build and check a new set of credentials before applying it. security_task_set[ug]id() is called inside the prepared section. This guarantees that nothing else will affect the creds until we've finished. The calling of set_dumpable() has been moved into commit_creds(). Much of the functionality of set_user() has been moved into commit_creds(). The get functions all simply access the data directly. (8) security_task_prctl() and cap_task_prctl(). security_task_prctl() has been modified to return -ENOSYS if it doesn't want to handle a function, or otherwise return the return value directly rather than through an argument. Additionally, cap_task_prctl() now prepares a new set of credentials, even if it doesn't end up using it. (9) Keyrings. A number of changes have been made to the keyrings code: (a) switch_uid_keyring(), copy_keys(), exit_keys() and suid_keys() have all been dropped and built in to the credentials functions directly. They may want separating out again later. (b) key_alloc() and search_process_keyrings() now take a cred pointer rather than a task pointer to specify the security context. (c) copy_creds() gives a new thread within the same thread group a new thread keyring if its parent had one, otherwise it discards the thread keyring. (d) The authorisation key now points directly to the credentials to extend the search into rather pointing to the task that carries them. (e) Installing thread, process or session keyrings causes a new set of credentials to be created, even though it's not strictly necessary for process or session keyrings (they're shared). (10) Usermode helper. The usermode helper code now carries a cred struct pointer in its subprocess_info struct instead of a new session keyring pointer. This set of credentials is derived from init_cred and installed on the new process after it has been cloned. call_usermodehelper_setup() allocates the new credentials and call_usermodehelper_freeinfo() discards them if they haven't been used. A special cred function (prepare_usermodeinfo_creds()) is provided specifically for call_usermodehelper_setup() to call. call_usermodehelper_setkeys() adjusts the credentials to sport the supplied keyring as the new session keyring. (11) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) selinux_setprocattr() no longer does its check for whether the current ptracer can access processes with the new SID inside the lock that covers getting the ptracer's SID. Whilst this lock ensures that the check is done with the ptracer pinned, the result is only valid until the lock is released, so there's no point doing it inside the lock. (12) is_single_threaded(). This function has been extracted from selinux_setprocattr() and put into a file of its own in the lib/ directory as join_session_keyring() now wants to use it too. The code in SELinux just checked to see whether a task shared mm_structs with other tasks (CLONE_VM), but that isn't good enough. We really want to know if they're part of the same thread group (CLONE_THREAD). (13) nfsd. The NFS server daemon now has to use the COW credentials to set the credentials it is going to use. It really needs to pass the credentials down to the functions it calls, but it can't do that until other patches in this series have been applied. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 16:39:23 -07:00
/*
* Change the request_key authorisation key on the current process.
CRED: Inaugurate COW credentials Inaugurate copy-on-write credentials management. This uses RCU to manage the credentials pointer in the task_struct with respect to accesses by other tasks. A process may only modify its own credentials, and so does not need locking to access or modify its own credentials. A mutex (cred_replace_mutex) is added to the task_struct to control the effect of PTRACE_ATTACHED on credential calculations, particularly with respect to execve(). With this patch, the contents of an active credentials struct may not be changed directly; rather a new set of credentials must be prepared, modified and committed using something like the following sequence of events: struct cred *new = prepare_creds(); int ret = blah(new); if (ret < 0) { abort_creds(new); return ret; } return commit_creds(new); There are some exceptions to this rule: the keyrings pointed to by the active credentials may be instantiated - keyrings violate the COW rule as managing COW keyrings is tricky, given that it is possible for a task to directly alter the keys in a keyring in use by another task. To help enforce this, various pointers to sets of credentials, such as those in the task_struct, are declared const. The purpose of this is compile-time discouragement of altering credentials through those pointers. Once a set of credentials has been made public through one of these pointers, it may not be modified, except under special circumstances: (1) Its reference count may incremented and decremented. (2) The keyrings to which it points may be modified, but not replaced. The only safe way to modify anything else is to create a replacement and commit using the functions described in Documentation/credentials.txt (which will be added by a later patch). This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). This now prepares and commits credentials in various places in the security code rather than altering the current creds directly. (2) Temporary credential overrides. do_coredump() and sys_faccessat() now prepare their own credentials and temporarily override the ones currently on the acting thread, whilst preventing interference from other threads by holding cred_replace_mutex on the thread being dumped. This will be replaced in a future patch by something that hands down the credentials directly to the functions being called, rather than altering the task's objective credentials. (3) LSM interface. A number of functions have been changed, added or removed: (*) security_capset_check(), ->capset_check() (*) security_capset_set(), ->capset_set() Removed in favour of security_capset(). (*) security_capset(), ->capset() New. This is passed a pointer to the new creds, a pointer to the old creds and the proposed capability sets. It should fill in the new creds or return an error. All pointers, barring the pointer to the new creds, are now const. (*) security_bprm_apply_creds(), ->bprm_apply_creds() Changed; now returns a value, which will cause the process to be killed if it's an error. (*) security_task_alloc(), ->task_alloc_security() Removed in favour of security_prepare_creds(). (*) security_cred_free(), ->cred_free() New. Free security data attached to cred->security. (*) security_prepare_creds(), ->cred_prepare() New. Duplicate any security data attached to cred->security. (*) security_commit_creds(), ->cred_commit() New. Apply any security effects for the upcoming installation of new security by commit_creds(). (*) security_task_post_setuid(), ->task_post_setuid() Removed in favour of security_task_fix_setuid(). (*) security_task_fix_setuid(), ->task_fix_setuid() Fix up the proposed new credentials for setuid(). This is used by cap_set_fix_setuid() to implicitly adjust capabilities in line with setuid() changes. Changes are made to the new credentials, rather than the task itself as in security_task_post_setuid(). (*) security_task_reparent_to_init(), ->task_reparent_to_init() Removed. Instead the task being reparented to init is referred directly to init's credentials. NOTE! This results in the loss of some state: SELinux's osid no longer records the sid of the thread that forked it. (*) security_key_alloc(), ->key_alloc() (*) security_key_permission(), ->key_permission() Changed. These now take cred pointers rather than task pointers to refer to the security context. (4) sys_capset(). This has been simplified and uses less locking. The LSM functions it calls have been merged. (5) reparent_to_kthreadd(). This gives the current thread the same credentials as init by simply using commit_thread() to point that way. (6) __sigqueue_alloc() and switch_uid() __sigqueue_alloc() can't stop the target task from changing its creds beneath it, so this function gets a reference to the currently applicable user_struct which it then passes into the sigqueue struct it returns if successful. switch_uid() is now called from commit_creds(), and possibly should be folded into that. commit_creds() should take care of protecting __sigqueue_alloc(). (7) [sg]et[ug]id() and co and [sg]et_current_groups. The set functions now all use prepare_creds(), commit_creds() and abort_creds() to build and check a new set of credentials before applying it. security_task_set[ug]id() is called inside the prepared section. This guarantees that nothing else will affect the creds until we've finished. The calling of set_dumpable() has been moved into commit_creds(). Much of the functionality of set_user() has been moved into commit_creds(). The get functions all simply access the data directly. (8) security_task_prctl() and cap_task_prctl(). security_task_prctl() has been modified to return -ENOSYS if it doesn't want to handle a function, or otherwise return the return value directly rather than through an argument. Additionally, cap_task_prctl() now prepares a new set of credentials, even if it doesn't end up using it. (9) Keyrings. A number of changes have been made to the keyrings code: (a) switch_uid_keyring(), copy_keys(), exit_keys() and suid_keys() have all been dropped and built in to the credentials functions directly. They may want separating out again later. (b) key_alloc() and search_process_keyrings() now take a cred pointer rather than a task pointer to specify the security context. (c) copy_creds() gives a new thread within the same thread group a new thread keyring if its parent had one, otherwise it discards the thread keyring. (d) The authorisation key now points directly to the credentials to extend the search into rather pointing to the task that carries them. (e) Installing thread, process or session keyrings causes a new set of credentials to be created, even though it's not strictly necessary for process or session keyrings (they're shared). (10) Usermode helper. The usermode helper code now carries a cred struct pointer in its subprocess_info struct instead of a new session keyring pointer. This set of credentials is derived from init_cred and installed on the new process after it has been cloned. call_usermodehelper_setup() allocates the new credentials and call_usermodehelper_freeinfo() discards them if they haven't been used. A special cred function (prepare_usermodeinfo_creds()) is provided specifically for call_usermodehelper_setup() to call. call_usermodehelper_setkeys() adjusts the credentials to sport the supplied keyring as the new session keyring. (11) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) selinux_setprocattr() no longer does its check for whether the current ptracer can access processes with the new SID inside the lock that covers getting the ptracer's SID. Whilst this lock ensures that the check is done with the ptracer pinned, the result is only valid until the lock is released, so there's no point doing it inside the lock. (12) is_single_threaded(). This function has been extracted from selinux_setprocattr() and put into a file of its own in the lib/ directory as join_session_keyring() now wants to use it too. The code in SELinux just checked to see whether a task shared mm_structs with other tasks (CLONE_VM), but that isn't good enough. We really want to know if they're part of the same thread group (CLONE_THREAD). (13) nfsd. The NFS server daemon now has to use the COW credentials to set the credentials it is going to use. It really needs to pass the credentials down to the functions it calls, but it can't do that until other patches in this series have been applied. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 16:39:23 -07:00
*/
static int keyctl_change_reqkey_auth(struct key *key)
{
struct cred *new;
new = prepare_creds();
if (!new)
return -ENOMEM;
key_put(new->request_key_auth);
new->request_key_auth = key_get(key);
return commit_creds(new);
}
/*
* Instantiate a key with the specified payload and link the key into the
* destination keyring if one is given.
*
* The caller must have the appropriate instantiation permit set for this to
* work (see keyctl_assume_authority). No other permissions are required.
*
* If successful, 0 will be returned.
*/
long keyctl_instantiate_key_common(key_serial_t id,
struct iov_iter *from,
key_serial_t ringid)
{
CRED: Inaugurate COW credentials Inaugurate copy-on-write credentials management. This uses RCU to manage the credentials pointer in the task_struct with respect to accesses by other tasks. A process may only modify its own credentials, and so does not need locking to access or modify its own credentials. A mutex (cred_replace_mutex) is added to the task_struct to control the effect of PTRACE_ATTACHED on credential calculations, particularly with respect to execve(). With this patch, the contents of an active credentials struct may not be changed directly; rather a new set of credentials must be prepared, modified and committed using something like the following sequence of events: struct cred *new = prepare_creds(); int ret = blah(new); if (ret < 0) { abort_creds(new); return ret; } return commit_creds(new); There are some exceptions to this rule: the keyrings pointed to by the active credentials may be instantiated - keyrings violate the COW rule as managing COW keyrings is tricky, given that it is possible for a task to directly alter the keys in a keyring in use by another task. To help enforce this, various pointers to sets of credentials, such as those in the task_struct, are declared const. The purpose of this is compile-time discouragement of altering credentials through those pointers. Once a set of credentials has been made public through one of these pointers, it may not be modified, except under special circumstances: (1) Its reference count may incremented and decremented. (2) The keyrings to which it points may be modified, but not replaced. The only safe way to modify anything else is to create a replacement and commit using the functions described in Documentation/credentials.txt (which will be added by a later patch). This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). This now prepares and commits credentials in various places in the security code rather than altering the current creds directly. (2) Temporary credential overrides. do_coredump() and sys_faccessat() now prepare their own credentials and temporarily override the ones currently on the acting thread, whilst preventing interference from other threads by holding cred_replace_mutex on the thread being dumped. This will be replaced in a future patch by something that hands down the credentials directly to the functions being called, rather than altering the task's objective credentials. (3) LSM interface. A number of functions have been changed, added or removed: (*) security_capset_check(), ->capset_check() (*) security_capset_set(), ->capset_set() Removed in favour of security_capset(). (*) security_capset(), ->capset() New. This is passed a pointer to the new creds, a pointer to the old creds and the proposed capability sets. It should fill in the new creds or return an error. All pointers, barring the pointer to the new creds, are now const. (*) security_bprm_apply_creds(), ->bprm_apply_creds() Changed; now returns a value, which will cause the process to be killed if it's an error. (*) security_task_alloc(), ->task_alloc_security() Removed in favour of security_prepare_creds(). (*) security_cred_free(), ->cred_free() New. Free security data attached to cred->security. (*) security_prepare_creds(), ->cred_prepare() New. Duplicate any security data attached to cred->security. (*) security_commit_creds(), ->cred_commit() New. Apply any security effects for the upcoming installation of new security by commit_creds(). (*) security_task_post_setuid(), ->task_post_setuid() Removed in favour of security_task_fix_setuid(). (*) security_task_fix_setuid(), ->task_fix_setuid() Fix up the proposed new credentials for setuid(). This is used by cap_set_fix_setuid() to implicitly adjust capabilities in line with setuid() changes. Changes are made to the new credentials, rather than the task itself as in security_task_post_setuid(). (*) security_task_reparent_to_init(), ->task_reparent_to_init() Removed. Instead the task being reparented to init is referred directly to init's credentials. NOTE! This results in the loss of some state: SELinux's osid no longer records the sid of the thread that forked it. (*) security_key_alloc(), ->key_alloc() (*) security_key_permission(), ->key_permission() Changed. These now take cred pointers rather than task pointers to refer to the security context. (4) sys_capset(). This has been simplified and uses less locking. The LSM functions it calls have been merged. (5) reparent_to_kthreadd(). This gives the current thread the same credentials as init by simply using commit_thread() to point that way. (6) __sigqueue_alloc() and switch_uid() __sigqueue_alloc() can't stop the target task from changing its creds beneath it, so this function gets a reference to the currently applicable user_struct which it then passes into the sigqueue struct it returns if successful. switch_uid() is now called from commit_creds(), and possibly should be folded into that. commit_creds() should take care of protecting __sigqueue_alloc(). (7) [sg]et[ug]id() and co and [sg]et_current_groups. The set functions now all use prepare_creds(), commit_creds() and abort_creds() to build and check a new set of credentials before applying it. security_task_set[ug]id() is called inside the prepared section. This guarantees that nothing else will affect the creds until we've finished. The calling of set_dumpable() has been moved into commit_creds(). Much of the functionality of set_user() has been moved into commit_creds(). The get functions all simply access the data directly. (8) security_task_prctl() and cap_task_prctl(). security_task_prctl() has been modified to return -ENOSYS if it doesn't want to handle a function, or otherwise return the return value directly rather than through an argument. Additionally, cap_task_prctl() now prepares a new set of credentials, even if it doesn't end up using it. (9) Keyrings. A number of changes have been made to the keyrings code: (a) switch_uid_keyring(), copy_keys(), exit_keys() and suid_keys() have all been dropped and built in to the credentials functions directly. They may want separating out again later. (b) key_alloc() and search_process_keyrings() now take a cred pointer rather than a task pointer to specify the security context. (c) copy_creds() gives a new thread within the same thread group a new thread keyring if its parent had one, otherwise it discards the thread keyring. (d) The authorisation key now points directly to the credentials to extend the search into rather pointing to the task that carries them. (e) Installing thread, process or session keyrings causes a new set of credentials to be created, even though it's not strictly necessary for process or session keyrings (they're shared). (10) Usermode helper. The usermode helper code now carries a cred struct pointer in its subprocess_info struct instead of a new session keyring pointer. This set of credentials is derived from init_cred and installed on the new process after it has been cloned. call_usermodehelper_setup() allocates the new credentials and call_usermodehelper_freeinfo() discards them if they haven't been used. A special cred function (prepare_usermodeinfo_creds()) is provided specifically for call_usermodehelper_setup() to call. call_usermodehelper_setkeys() adjusts the credentials to sport the supplied keyring as the new session keyring. (11) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) selinux_setprocattr() no longer does its check for whether the current ptracer can access processes with the new SID inside the lock that covers getting the ptracer's SID. Whilst this lock ensures that the check is done with the ptracer pinned, the result is only valid until the lock is released, so there's no point doing it inside the lock. (12) is_single_threaded(). This function has been extracted from selinux_setprocattr() and put into a file of its own in the lib/ directory as join_session_keyring() now wants to use it too. The code in SELinux just checked to see whether a task shared mm_structs with other tasks (CLONE_VM), but that isn't good enough. We really want to know if they're part of the same thread group (CLONE_THREAD). (13) nfsd. The NFS server daemon now has to use the COW credentials to set the credentials it is going to use. It really needs to pass the credentials down to the functions it calls, but it can't do that until other patches in this series have been applied. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 16:39:23 -07:00
const struct cred *cred = current_cred();
[PATCH] Keys: Make request-key create an authorisation key The attached patch makes the following changes: (1) There's a new special key type called ".request_key_auth". This is an authorisation key for when one process requests a key and another process is started to construct it. This type of key cannot be created by the user; nor can it be requested by kernel services. Authorisation keys hold two references: (a) Each refers to a key being constructed. When the key being constructed is instantiated the authorisation key is revoked, rendering it of no further use. (b) The "authorising process". This is either: (i) the process that called request_key(), or: (ii) if the process that called request_key() itself had an authorisation key in its session keyring, then the authorising process referred to by that authorisation key will also be referred to by the new authorisation key. This means that the process that initiated a chain of key requests will authorise the lot of them, and will, by default, wind up with the keys obtained from them in its keyrings. (2) request_key() creates an authorisation key which is then passed to /sbin/request-key in as part of a new session keyring. (3) When request_key() is searching for a key to hand back to the caller, if it comes across an authorisation key in the session keyring of the calling process, it will also search the keyrings of the process specified therein and it will use the specified process's credentials (fsuid, fsgid, groups) to do that rather than the calling process's credentials. This allows a process started by /sbin/request-key to find keys belonging to the authorising process. (4) A key can be read, even if the process executing KEYCTL_READ doesn't have direct read or search permission if that key is contained within the keyrings of a process specified by an authorisation key found within the calling process's session keyring, and is searchable using the credentials of the authorising process. This allows a process started by /sbin/request-key to read keys belonging to the authorising process. (5) The magic KEY_SPEC_*_KEYRING key IDs when passed to KEYCTL_INSTANTIATE or KEYCTL_NEGATE will specify a keyring of the authorising process, rather than the process doing the instantiation. (6) One of the process keyrings can be nominated as the default to which request_key() should attach new keys if not otherwise specified. This is done with KEYCTL_SET_REQKEY_KEYRING and one of the KEY_REQKEY_DEFL_* constants. The current setting can also be read using this call. (7) request_key() is partially interruptible. If it is waiting for another process to finish constructing a key, it can be interrupted. This permits a request-key cycle to be broken without recourse to rebooting. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-Off-By: Benoit Boissinot <benoit.boissinot@ens-lyon.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 23:00:56 -06:00
struct request_key_auth *rka;
KEYS: Alter use of key instantiation link-to-keyring argument Alter the use of the key instantiation and negation functions' link-to-keyring arguments. Currently this specifies a keyring in the target process to link the key into, creating the keyring if it doesn't exist. This, however, can be a problem for copy-on-write credentials as it means that the instantiating process can alter the credentials of the requesting process. This patch alters the behaviour such that: (1) If keyctl_instantiate_key() or keyctl_negate_key() are given a specific keyring by ID (ringid >= 0), then that keyring will be used. (2) If keyctl_instantiate_key() or keyctl_negate_key() are given one of the special constants that refer to the requesting process's keyrings (KEY_SPEC_*_KEYRING, all <= 0), then: (a) If sys_request_key() was given a keyring to use (destringid) then the key will be attached to that keyring. (b) If sys_request_key() was given a NULL keyring, then the key being instantiated will be attached to the default keyring as set by keyctl_set_reqkey_keyring(). (3) No extra link will be made. Decision point (1) follows current behaviour, and allows those instantiators who've searched for a specifically named keyring in the requestor's keyring so as to partition the keys by type to still have their named keyrings. Decision point (2) allows the requestor to make sure that the key or keys that get produced by request_key() go where they want, whilst allowing the instantiator to request that the key is retained. This is mainly useful for situations where the instantiator makes a secondary request, the key for which should be retained by the initial requestor: +-----------+ +--------------+ +--------------+ | | | | | | | Requestor |------->| Instantiator |------->| Instantiator | | | | | | | +-----------+ +--------------+ +--------------+ request_key() request_key() This might be useful, for example, in Kerberos, where the requestor requests a ticket, and then the ticket instantiator requests the TGT, which someone else then has to go and fetch. The TGT, however, should be retained in the keyrings of the requestor, not the first instantiator. To make this explict an extra special keyring constant is also added. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <jmorris@namei.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 16:39:14 -07:00
struct key *instkey, *dest_keyring;
size_t plen = from ? iov_iter_count(from) : 0;
void *payload;
long ret;
CRED: Inaugurate COW credentials Inaugurate copy-on-write credentials management. This uses RCU to manage the credentials pointer in the task_struct with respect to accesses by other tasks. A process may only modify its own credentials, and so does not need locking to access or modify its own credentials. A mutex (cred_replace_mutex) is added to the task_struct to control the effect of PTRACE_ATTACHED on credential calculations, particularly with respect to execve(). With this patch, the contents of an active credentials struct may not be changed directly; rather a new set of credentials must be prepared, modified and committed using something like the following sequence of events: struct cred *new = prepare_creds(); int ret = blah(new); if (ret < 0) { abort_creds(new); return ret; } return commit_creds(new); There are some exceptions to this rule: the keyrings pointed to by the active credentials may be instantiated - keyrings violate the COW rule as managing COW keyrings is tricky, given that it is possible for a task to directly alter the keys in a keyring in use by another task. To help enforce this, various pointers to sets of credentials, such as those in the task_struct, are declared const. The purpose of this is compile-time discouragement of altering credentials through those pointers. Once a set of credentials has been made public through one of these pointers, it may not be modified, except under special circumstances: (1) Its reference count may incremented and decremented. (2) The keyrings to which it points may be modified, but not replaced. The only safe way to modify anything else is to create a replacement and commit using the functions described in Documentation/credentials.txt (which will be added by a later patch). This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). This now prepares and commits credentials in various places in the security code rather than altering the current creds directly. (2) Temporary credential overrides. do_coredump() and sys_faccessat() now prepare their own credentials and temporarily override the ones currently on the acting thread, whilst preventing interference from other threads by holding cred_replace_mutex on the thread being dumped. This will be replaced in a future patch by something that hands down the credentials directly to the functions being called, rather than altering the task's objective credentials. (3) LSM interface. A number of functions have been changed, added or removed: (*) security_capset_check(), ->capset_check() (*) security_capset_set(), ->capset_set() Removed in favour of security_capset(). (*) security_capset(), ->capset() New. This is passed a pointer to the new creds, a pointer to the old creds and the proposed capability sets. It should fill in the new creds or return an error. All pointers, barring the pointer to the new creds, are now const. (*) security_bprm_apply_creds(), ->bprm_apply_creds() Changed; now returns a value, which will cause the process to be killed if it's an error. (*) security_task_alloc(), ->task_alloc_security() Removed in favour of security_prepare_creds(). (*) security_cred_free(), ->cred_free() New. Free security data attached to cred->security. (*) security_prepare_creds(), ->cred_prepare() New. Duplicate any security data attached to cred->security. (*) security_commit_creds(), ->cred_commit() New. Apply any security effects for the upcoming installation of new security by commit_creds(). (*) security_task_post_setuid(), ->task_post_setuid() Removed in favour of security_task_fix_setuid(). (*) security_task_fix_setuid(), ->task_fix_setuid() Fix up the proposed new credentials for setuid(). This is used by cap_set_fix_setuid() to implicitly adjust capabilities in line with setuid() changes. Changes are made to the new credentials, rather than the task itself as in security_task_post_setuid(). (*) security_task_reparent_to_init(), ->task_reparent_to_init() Removed. Instead the task being reparented to init is referred directly to init's credentials. NOTE! This results in the loss of some state: SELinux's osid no longer records the sid of the thread that forked it. (*) security_key_alloc(), ->key_alloc() (*) security_key_permission(), ->key_permission() Changed. These now take cred pointers rather than task pointers to refer to the security context. (4) sys_capset(). This has been simplified and uses less locking. The LSM functions it calls have been merged. (5) reparent_to_kthreadd(). This gives the current thread the same credentials as init by simply using commit_thread() to point that way. (6) __sigqueue_alloc() and switch_uid() __sigqueue_alloc() can't stop the target task from changing its creds beneath it, so this function gets a reference to the currently applicable user_struct which it then passes into the sigqueue struct it returns if successful. switch_uid() is now called from commit_creds(), and possibly should be folded into that. commit_creds() should take care of protecting __sigqueue_alloc(). (7) [sg]et[ug]id() and co and [sg]et_current_groups. The set functions now all use prepare_creds(), commit_creds() and abort_creds() to build and check a new set of credentials before applying it. security_task_set[ug]id() is called inside the prepared section. This guarantees that nothing else will affect the creds until we've finished. The calling of set_dumpable() has been moved into commit_creds(). Much of the functionality of set_user() has been moved into commit_creds(). The get functions all simply access the data directly. (8) security_task_prctl() and cap_task_prctl(). security_task_prctl() has been modified to return -ENOSYS if it doesn't want to handle a function, or otherwise return the return value directly rather than through an argument. Additionally, cap_task_prctl() now prepares a new set of credentials, even if it doesn't end up using it. (9) Keyrings. A number of changes have been made to the keyrings code: (a) switch_uid_keyring(), copy_keys(), exit_keys() and suid_keys() have all been dropped and built in to the credentials functions directly. They may want separating out again later. (b) key_alloc() and search_process_keyrings() now take a cred pointer rather than a task pointer to specify the security context. (c) copy_creds() gives a new thread within the same thread group a new thread keyring if its parent had one, otherwise it discards the thread keyring. (d) The authorisation key now points directly to the credentials to extend the search into rather pointing to the task that carries them. (e) Installing thread, process or session keyrings causes a new set of credentials to be created, even though it's not strictly necessary for process or session keyrings (they're shared). (10) Usermode helper. The usermode helper code now carries a cred struct pointer in its subprocess_info struct instead of a new session keyring pointer. This set of credentials is derived from init_cred and installed on the new process after it has been cloned. call_usermodehelper_setup() allocates the new credentials and call_usermodehelper_freeinfo() discards them if they haven't been used. A special cred function (prepare_usermodeinfo_creds()) is provided specifically for call_usermodehelper_setup() to call. call_usermodehelper_setkeys() adjusts the credentials to sport the supplied keyring as the new session keyring. (11) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) selinux_setprocattr() no longer does its check for whether the current ptracer can access processes with the new SID inside the lock that covers getting the ptracer's SID. Whilst this lock ensures that the check is done with the ptracer pinned, the result is only valid until the lock is released, so there's no point doing it inside the lock. (12) is_single_threaded(). This function has been extracted from selinux_setprocattr() and put into a file of its own in the lib/ directory as join_session_keyring() now wants to use it too. The code in SELinux just checked to see whether a task shared mm_structs with other tasks (CLONE_VM), but that isn't good enough. We really want to know if they're part of the same thread group (CLONE_THREAD). (13) nfsd. The NFS server daemon now has to use the COW credentials to set the credentials it is going to use. It really needs to pass the credentials down to the functions it calls, but it can't do that until other patches in this series have been applied. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 16:39:23 -07:00
kenter("%d,,%zu,%d", id, plen, ringid);
if (!plen)
from = NULL;
ret = -EINVAL;
if (plen > 1024 * 1024 - 1)
goto error;
[PATCH] keys: Permit running process to instantiate keys Make it possible for a running process (such as gssapid) to be able to instantiate a key, as was requested by Trond Myklebust for NFS4. The patch makes the following changes: (1) A new, optional key type method has been added. This permits a key type to intercept requests at the point /sbin/request-key is about to be spawned and do something else with them - passing them over the rpc_pipefs files or netlink sockets for instance. The uninstantiated key, the authorisation key and the intended operation name are passed to the method. (2) The callout_info is no longer passed as an argument to /sbin/request-key to prevent unauthorised viewing of this data using ps or by looking in /proc/pid/cmdline. This means that the old /sbin/request-key program will not work with the patched kernel as it will expect to see an extra argument that is no longer there. A revised keyutils package will be made available tomorrow. (3) The callout_info is now attached to the authorisation key. Reading this key will retrieve the information. (4) A new field has been added to the task_struct. This holds the authorisation key currently active for a thread. Searches now look here for the caller's set of keys rather than looking for an auth key in the lowest level of the session keyring. This permits a thread to be servicing multiple requests at once and to switch between them. Note that this is per-thread, not per-process, and so is usable in multithreaded programs. The setting of this field is inherited across fork and exec. (5) A new keyctl function (KEYCTL_ASSUME_AUTHORITY) has been added that permits a thread to assume the authority to deal with an uninstantiated key. Assumption is only permitted if the authorisation key associated with the uninstantiated key is somewhere in the thread's keyrings. This function can also clear the assumption. (6) A new magic key specifier has been added to refer to the currently assumed authorisation key (KEY_SPEC_REQKEY_AUTH_KEY). (7) Instantiation will only proceed if the appropriate authorisation key is assumed first. The assumed authorisation key is discarded if instantiation is successful. (8) key_validate() is moved from the file of request_key functions to the file of permissions functions. (9) The documentation is updated. From: <Valdis.Kletnieks@vt.edu> Build fix. Signed-off-by: David Howells <dhowells@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Alexander Zangerl <az@bond.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:02:47 -07:00
/* the appropriate instantiation authorisation key must have been
* assumed before calling this */
ret = -EPERM;
CRED: Inaugurate COW credentials Inaugurate copy-on-write credentials management. This uses RCU to manage the credentials pointer in the task_struct with respect to accesses by other tasks. A process may only modify its own credentials, and so does not need locking to access or modify its own credentials. A mutex (cred_replace_mutex) is added to the task_struct to control the effect of PTRACE_ATTACHED on credential calculations, particularly with respect to execve(). With this patch, the contents of an active credentials struct may not be changed directly; rather a new set of credentials must be prepared, modified and committed using something like the following sequence of events: struct cred *new = prepare_creds(); int ret = blah(new); if (ret < 0) { abort_creds(new); return ret; } return commit_creds(new); There are some exceptions to this rule: the keyrings pointed to by the active credentials may be instantiated - keyrings violate the COW rule as managing COW keyrings is tricky, given that it is possible for a task to directly alter the keys in a keyring in use by another task. To help enforce this, various pointers to sets of credentials, such as those in the task_struct, are declared const. The purpose of this is compile-time discouragement of altering credentials through those pointers. Once a set of credentials has been made public through one of these pointers, it may not be modified, except under special circumstances: (1) Its reference count may incremented and decremented. (2) The keyrings to which it points may be modified, but not replaced. The only safe way to modify anything else is to create a replacement and commit using the functions described in Documentation/credentials.txt (which will be added by a later patch). This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). This now prepares and commits credentials in various places in the security code rather than altering the current creds directly. (2) Temporary credential overrides. do_coredump() and sys_faccessat() now prepare their own credentials and temporarily override the ones currently on the acting thread, whilst preventing interference from other threads by holding cred_replace_mutex on the thread being dumped. This will be replaced in a future patch by something that hands down the credentials directly to the functions being called, rather than altering the task's objective credentials. (3) LSM interface. A number of functions have been changed, added or removed: (*) security_capset_check(), ->capset_check() (*) security_capset_set(), ->capset_set() Removed in favour of security_capset(). (*) security_capset(), ->capset() New. This is passed a pointer to the new creds, a pointer to the old creds and the proposed capability sets. It should fill in the new creds or return an error. All pointers, barring the pointer to the new creds, are now const. (*) security_bprm_apply_creds(), ->bprm_apply_creds() Changed; now returns a value, which will cause the process to be killed if it's an error. (*) security_task_alloc(), ->task_alloc_security() Removed in favour of security_prepare_creds(). (*) security_cred_free(), ->cred_free() New. Free security data attached to cred->security. (*) security_prepare_creds(), ->cred_prepare() New. Duplicate any security data attached to cred->security. (*) security_commit_creds(), ->cred_commit() New. Apply any security effects for the upcoming installation of new security by commit_creds(). (*) security_task_post_setuid(), ->task_post_setuid() Removed in favour of security_task_fix_setuid(). (*) security_task_fix_setuid(), ->task_fix_setuid() Fix up the proposed new credentials for setuid(). This is used by cap_set_fix_setuid() to implicitly adjust capabilities in line with setuid() changes. Changes are made to the new credentials, rather than the task itself as in security_task_post_setuid(). (*) security_task_reparent_to_init(), ->task_reparent_to_init() Removed. Instead the task being reparented to init is referred directly to init's credentials. NOTE! This results in the loss of some state: SELinux's osid no longer records the sid of the thread that forked it. (*) security_key_alloc(), ->key_alloc() (*) security_key_permission(), ->key_permission() Changed. These now take cred pointers rather than task pointers to refer to the security context. (4) sys_capset(). This has been simplified and uses less locking. The LSM functions it calls have been merged. (5) reparent_to_kthreadd(). This gives the current thread the same credentials as init by simply using commit_thread() to point that way. (6) __sigqueue_alloc() and switch_uid() __sigqueue_alloc() can't stop the target task from changing its creds beneath it, so this function gets a reference to the currently applicable user_struct which it then passes into the sigqueue struct it returns if successful. switch_uid() is now called from commit_creds(), and possibly should be folded into that. commit_creds() should take care of protecting __sigqueue_alloc(). (7) [sg]et[ug]id() and co and [sg]et_current_groups. The set functions now all use prepare_creds(), commit_creds() and abort_creds() to build and check a new set of credentials before applying it. security_task_set[ug]id() is called inside the prepared section. This guarantees that nothing else will affect the creds until we've finished. The calling of set_dumpable() has been moved into commit_creds(). Much of the functionality of set_user() has been moved into commit_creds(). The get functions all simply access the data directly. (8) security_task_prctl() and cap_task_prctl(). security_task_prctl() has been modified to return -ENOSYS if it doesn't want to handle a function, or otherwise return the return value directly rather than through an argument. Additionally, cap_task_prctl() now prepares a new set of credentials, even if it doesn't end up using it. (9) Keyrings. A number of changes have been made to the keyrings code: (a) switch_uid_keyring(), copy_keys(), exit_keys() and suid_keys() have all been dropped and built in to the credentials functions directly. They may want separating out again later. (b) key_alloc() and search_process_keyrings() now take a cred pointer rather than a task pointer to specify the security context. (c) copy_creds() gives a new thread within the same thread group a new thread keyring if its parent had one, otherwise it discards the thread keyring. (d) The authorisation key now points directly to the credentials to extend the search into rather pointing to the task that carries them. (e) Installing thread, process or session keyrings causes a new set of credentials to be created, even though it's not strictly necessary for process or session keyrings (they're shared). (10) Usermode helper. The usermode helper code now carries a cred struct pointer in its subprocess_info struct instead of a new session keyring pointer. This set of credentials is derived from init_cred and installed on the new process after it has been cloned. call_usermodehelper_setup() allocates the new credentials and call_usermodehelper_freeinfo() discards them if they haven't been used. A special cred function (prepare_usermodeinfo_creds()) is provided specifically for call_usermodehelper_setup() to call. call_usermodehelper_setkeys() adjusts the credentials to sport the supplied keyring as the new session keyring. (11) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) selinux_setprocattr() no longer does its check for whether the current ptracer can access processes with the new SID inside the lock that covers getting the ptracer's SID. Whilst this lock ensures that the check is done with the ptracer pinned, the result is only valid until the lock is released, so there's no point doing it inside the lock. (12) is_single_threaded(). This function has been extracted from selinux_setprocattr() and put into a file of its own in the lib/ directory as join_session_keyring() now wants to use it too. The code in SELinux just checked to see whether a task shared mm_structs with other tasks (CLONE_VM), but that isn't good enough. We really want to know if they're part of the same thread group (CLONE_THREAD). (13) nfsd. The NFS server daemon now has to use the COW credentials to set the credentials it is going to use. It really needs to pass the credentials down to the functions it calls, but it can't do that until other patches in this series have been applied. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 16:39:23 -07:00
instkey = cred->request_key_auth;
[PATCH] keys: Permit running process to instantiate keys Make it possible for a running process (such as gssapid) to be able to instantiate a key, as was requested by Trond Myklebust for NFS4. The patch makes the following changes: (1) A new, optional key type method has been added. This permits a key type to intercept requests at the point /sbin/request-key is about to be spawned and do something else with them - passing them over the rpc_pipefs files or netlink sockets for instance. The uninstantiated key, the authorisation key and the intended operation name are passed to the method. (2) The callout_info is no longer passed as an argument to /sbin/request-key to prevent unauthorised viewing of this data using ps or by looking in /proc/pid/cmdline. This means that the old /sbin/request-key program will not work with the patched kernel as it will expect to see an extra argument that is no longer there. A revised keyutils package will be made available tomorrow. (3) The callout_info is now attached to the authorisation key. Reading this key will retrieve the information. (4) A new field has been added to the task_struct. This holds the authorisation key currently active for a thread. Searches now look here for the caller's set of keys rather than looking for an auth key in the lowest level of the session keyring. This permits a thread to be servicing multiple requests at once and to switch between them. Note that this is per-thread, not per-process, and so is usable in multithreaded programs. The setting of this field is inherited across fork and exec. (5) A new keyctl function (KEYCTL_ASSUME_AUTHORITY) has been added that permits a thread to assume the authority to deal with an uninstantiated key. Assumption is only permitted if the authorisation key associated with the uninstantiated key is somewhere in the thread's keyrings. This function can also clear the assumption. (6) A new magic key specifier has been added to refer to the currently assumed authorisation key (KEY_SPEC_REQKEY_AUTH_KEY). (7) Instantiation will only proceed if the appropriate authorisation key is assumed first. The assumed authorisation key is discarded if instantiation is successful. (8) key_validate() is moved from the file of request_key functions to the file of permissions functions. (9) The documentation is updated. From: <Valdis.Kletnieks@vt.edu> Build fix. Signed-off-by: David Howells <dhowells@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Alexander Zangerl <az@bond.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:02:47 -07:00
if (!instkey)
goto error;
rka = instkey->payload.data[0];
[PATCH] keys: Permit running process to instantiate keys Make it possible for a running process (such as gssapid) to be able to instantiate a key, as was requested by Trond Myklebust for NFS4. The patch makes the following changes: (1) A new, optional key type method has been added. This permits a key type to intercept requests at the point /sbin/request-key is about to be spawned and do something else with them - passing them over the rpc_pipefs files or netlink sockets for instance. The uninstantiated key, the authorisation key and the intended operation name are passed to the method. (2) The callout_info is no longer passed as an argument to /sbin/request-key to prevent unauthorised viewing of this data using ps or by looking in /proc/pid/cmdline. This means that the old /sbin/request-key program will not work with the patched kernel as it will expect to see an extra argument that is no longer there. A revised keyutils package will be made available tomorrow. (3) The callout_info is now attached to the authorisation key. Reading this key will retrieve the information. (4) A new field has been added to the task_struct. This holds the authorisation key currently active for a thread. Searches now look here for the caller's set of keys rather than looking for an auth key in the lowest level of the session keyring. This permits a thread to be servicing multiple requests at once and to switch between them. Note that this is per-thread, not per-process, and so is usable in multithreaded programs. The setting of this field is inherited across fork and exec. (5) A new keyctl function (KEYCTL_ASSUME_AUTHORITY) has been added that permits a thread to assume the authority to deal with an uninstantiated key. Assumption is only permitted if the authorisation key associated with the uninstantiated key is somewhere in the thread's keyrings. This function can also clear the assumption. (6) A new magic key specifier has been added to refer to the currently assumed authorisation key (KEY_SPEC_REQKEY_AUTH_KEY). (7) Instantiation will only proceed if the appropriate authorisation key is assumed first. The assumed authorisation key is discarded if instantiation is successful. (8) key_validate() is moved from the file of request_key functions to the file of permissions functions. (9) The documentation is updated. From: <Valdis.Kletnieks@vt.edu> Build fix. Signed-off-by: David Howells <dhowells@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Alexander Zangerl <az@bond.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:02:47 -07:00
if (rka->target_key->serial != id)
goto error;
/* pull the payload in if one was supplied */
payload = NULL;
if (from) {
ret = -ENOMEM;
treewide: use kv[mz]alloc* rather than opencoded variants There are many code paths opencoding kvmalloc. Let's use the helper instead. The main difference to kvmalloc is that those users are usually not considering all the aspects of the memory allocator. E.g. allocation requests <= 32kB (with 4kB pages) are basically never failing and invoke OOM killer to satisfy the allocation. This sounds too disruptive for something that has a reasonable fallback - the vmalloc. On the other hand those requests might fallback to vmalloc even when the memory allocator would succeed after several more reclaim/compaction attempts previously. There is no guarantee something like that happens though. This patch converts many of those places to kv[mz]alloc* helpers because they are more conservative. Link: http://lkml.kernel.org/r/20170306103327.2766-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> # Xen bits Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Andreas Dilger <andreas.dilger@intel.com> # Lustre Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> # KVM/s390 Acked-by: Dan Williams <dan.j.williams@intel.com> # nvdim Acked-by: David Sterba <dsterba@suse.com> # btrfs Acked-by: Ilya Dryomov <idryomov@gmail.com> # Ceph Acked-by: Tariq Toukan <tariqt@mellanox.com> # mlx4 Acked-by: Leon Romanovsky <leonro@mellanox.com> # mlx5 Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Tony Luck <tony.luck@intel.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Santosh Raspatur <santosh@chelsio.com> Cc: Hariprasad S <hariprasad@chelsio.com> Cc: Yishai Hadas <yishaih@mellanox.com> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: "Yan, Zheng" <zyan@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-08 16:57:27 -06:00
payload = kvmalloc(plen, GFP_KERNEL);
if (!payload)
goto error;
ret = -EFAULT;
if (!copy_from_iter_full(payload, plen, from))
goto error2;
}
[PATCH] Keys: Make request-key create an authorisation key The attached patch makes the following changes: (1) There's a new special key type called ".request_key_auth". This is an authorisation key for when one process requests a key and another process is started to construct it. This type of key cannot be created by the user; nor can it be requested by kernel services. Authorisation keys hold two references: (a) Each refers to a key being constructed. When the key being constructed is instantiated the authorisation key is revoked, rendering it of no further use. (b) The "authorising process". This is either: (i) the process that called request_key(), or: (ii) if the process that called request_key() itself had an authorisation key in its session keyring, then the authorising process referred to by that authorisation key will also be referred to by the new authorisation key. This means that the process that initiated a chain of key requests will authorise the lot of them, and will, by default, wind up with the keys obtained from them in its keyrings. (2) request_key() creates an authorisation key which is then passed to /sbin/request-key in as part of a new session keyring. (3) When request_key() is searching for a key to hand back to the caller, if it comes across an authorisation key in the session keyring of the calling process, it will also search the keyrings of the process specified therein and it will use the specified process's credentials (fsuid, fsgid, groups) to do that rather than the calling process's credentials. This allows a process started by /sbin/request-key to find keys belonging to the authorising process. (4) A key can be read, even if the process executing KEYCTL_READ doesn't have direct read or search permission if that key is contained within the keyrings of a process specified by an authorisation key found within the calling process's session keyring, and is searchable using the credentials of the authorising process. This allows a process started by /sbin/request-key to read keys belonging to the authorising process. (5) The magic KEY_SPEC_*_KEYRING key IDs when passed to KEYCTL_INSTANTIATE or KEYCTL_NEGATE will specify a keyring of the authorising process, rather than the process doing the instantiation. (6) One of the process keyrings can be nominated as the default to which request_key() should attach new keys if not otherwise specified. This is done with KEYCTL_SET_REQKEY_KEYRING and one of the KEY_REQKEY_DEFL_* constants. The current setting can also be read using this call. (7) request_key() is partially interruptible. If it is waiting for another process to finish constructing a key, it can be interrupted. This permits a request-key cycle to be broken without recourse to rebooting. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-Off-By: Benoit Boissinot <benoit.boissinot@ens-lyon.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 23:00:56 -06:00
/* find the destination keyring amongst those belonging to the
* requesting task */
KEYS: Alter use of key instantiation link-to-keyring argument Alter the use of the key instantiation and negation functions' link-to-keyring arguments. Currently this specifies a keyring in the target process to link the key into, creating the keyring if it doesn't exist. This, however, can be a problem for copy-on-write credentials as it means that the instantiating process can alter the credentials of the requesting process. This patch alters the behaviour such that: (1) If keyctl_instantiate_key() or keyctl_negate_key() are given a specific keyring by ID (ringid >= 0), then that keyring will be used. (2) If keyctl_instantiate_key() or keyctl_negate_key() are given one of the special constants that refer to the requesting process's keyrings (KEY_SPEC_*_KEYRING, all <= 0), then: (a) If sys_request_key() was given a keyring to use (destringid) then the key will be attached to that keyring. (b) If sys_request_key() was given a NULL keyring, then the key being instantiated will be attached to the default keyring as set by keyctl_set_reqkey_keyring(). (3) No extra link will be made. Decision point (1) follows current behaviour, and allows those instantiators who've searched for a specifically named keyring in the requestor's keyring so as to partition the keys by type to still have their named keyrings. Decision point (2) allows the requestor to make sure that the key or keys that get produced by request_key() go where they want, whilst allowing the instantiator to request that the key is retained. This is mainly useful for situations where the instantiator makes a secondary request, the key for which should be retained by the initial requestor: +-----------+ +--------------+ +--------------+ | | | | | | | Requestor |------->| Instantiator |------->| Instantiator | | | | | | | +-----------+ +--------------+ +--------------+ request_key() request_key() This might be useful, for example, in Kerberos, where the requestor requests a ticket, and then the ticket instantiator requests the TGT, which someone else then has to go and fetch. The TGT, however, should be retained in the keyrings of the requestor, not the first instantiator. To make this explict an extra special keyring constant is also added. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <jmorris@namei.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 16:39:14 -07:00
ret = get_instantiation_keyring(ringid, rka, &dest_keyring);
if (ret < 0)
goto error2;
/* instantiate the key and link it into a keyring */
[PATCH] Keys: Make request-key create an authorisation key The attached patch makes the following changes: (1) There's a new special key type called ".request_key_auth". This is an authorisation key for when one process requests a key and another process is started to construct it. This type of key cannot be created by the user; nor can it be requested by kernel services. Authorisation keys hold two references: (a) Each refers to a key being constructed. When the key being constructed is instantiated the authorisation key is revoked, rendering it of no further use. (b) The "authorising process". This is either: (i) the process that called request_key(), or: (ii) if the process that called request_key() itself had an authorisation key in its session keyring, then the authorising process referred to by that authorisation key will also be referred to by the new authorisation key. This means that the process that initiated a chain of key requests will authorise the lot of them, and will, by default, wind up with the keys obtained from them in its keyrings. (2) request_key() creates an authorisation key which is then passed to /sbin/request-key in as part of a new session keyring. (3) When request_key() is searching for a key to hand back to the caller, if it comes across an authorisation key in the session keyring of the calling process, it will also search the keyrings of the process specified therein and it will use the specified process's credentials (fsuid, fsgid, groups) to do that rather than the calling process's credentials. This allows a process started by /sbin/request-key to find keys belonging to the authorising process. (4) A key can be read, even if the process executing KEYCTL_READ doesn't have direct read or search permission if that key is contained within the keyrings of a process specified by an authorisation key found within the calling process's session keyring, and is searchable using the credentials of the authorising process. This allows a process started by /sbin/request-key to read keys belonging to the authorising process. (5) The magic KEY_SPEC_*_KEYRING key IDs when passed to KEYCTL_INSTANTIATE or KEYCTL_NEGATE will specify a keyring of the authorising process, rather than the process doing the instantiation. (6) One of the process keyrings can be nominated as the default to which request_key() should attach new keys if not otherwise specified. This is done with KEYCTL_SET_REQKEY_KEYRING and one of the KEY_REQKEY_DEFL_* constants. The current setting can also be read using this call. (7) request_key() is partially interruptible. If it is waiting for another process to finish constructing a key, it can be interrupted. This permits a request-key cycle to be broken without recourse to rebooting. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-Off-By: Benoit Boissinot <benoit.boissinot@ens-lyon.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 23:00:56 -06:00
ret = key_instantiate_and_link(rka->target_key, payload, plen,
KEYS: Alter use of key instantiation link-to-keyring argument Alter the use of the key instantiation and negation functions' link-to-keyring arguments. Currently this specifies a keyring in the target process to link the key into, creating the keyring if it doesn't exist. This, however, can be a problem for copy-on-write credentials as it means that the instantiating process can alter the credentials of the requesting process. This patch alters the behaviour such that: (1) If keyctl_instantiate_key() or keyctl_negate_key() are given a specific keyring by ID (ringid >= 0), then that keyring will be used. (2) If keyctl_instantiate_key() or keyctl_negate_key() are given one of the special constants that refer to the requesting process's keyrings (KEY_SPEC_*_KEYRING, all <= 0), then: (a) If sys_request_key() was given a keyring to use (destringid) then the key will be attached to that keyring. (b) If sys_request_key() was given a NULL keyring, then the key being instantiated will be attached to the default keyring as set by keyctl_set_reqkey_keyring(). (3) No extra link will be made. Decision point (1) follows current behaviour, and allows those instantiators who've searched for a specifically named keyring in the requestor's keyring so as to partition the keys by type to still have their named keyrings. Decision point (2) allows the requestor to make sure that the key or keys that get produced by request_key() go where they want, whilst allowing the instantiator to request that the key is retained. This is mainly useful for situations where the instantiator makes a secondary request, the key for which should be retained by the initial requestor: +-----------+ +--------------+ +--------------+ | | | | | | | Requestor |------->| Instantiator |------->| Instantiator | | | | | | | +-----------+ +--------------+ +--------------+ request_key() request_key() This might be useful, for example, in Kerberos, where the requestor requests a ticket, and then the ticket instantiator requests the TGT, which someone else then has to go and fetch. The TGT, however, should be retained in the keyrings of the requestor, not the first instantiator. To make this explict an extra special keyring constant is also added. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <jmorris@namei.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 16:39:14 -07:00
dest_keyring, instkey);
KEYS: Alter use of key instantiation link-to-keyring argument Alter the use of the key instantiation and negation functions' link-to-keyring arguments. Currently this specifies a keyring in the target process to link the key into, creating the keyring if it doesn't exist. This, however, can be a problem for copy-on-write credentials as it means that the instantiating process can alter the credentials of the requesting process. This patch alters the behaviour such that: (1) If keyctl_instantiate_key() or keyctl_negate_key() are given a specific keyring by ID (ringid >= 0), then that keyring will be used. (2) If keyctl_instantiate_key() or keyctl_negate_key() are given one of the special constants that refer to the requesting process's keyrings (KEY_SPEC_*_KEYRING, all <= 0), then: (a) If sys_request_key() was given a keyring to use (destringid) then the key will be attached to that keyring. (b) If sys_request_key() was given a NULL keyring, then the key being instantiated will be attached to the default keyring as set by keyctl_set_reqkey_keyring(). (3) No extra link will be made. Decision point (1) follows current behaviour, and allows those instantiators who've searched for a specifically named keyring in the requestor's keyring so as to partition the keys by type to still have their named keyrings. Decision point (2) allows the requestor to make sure that the key or keys that get produced by request_key() go where they want, whilst allowing the instantiator to request that the key is retained. This is mainly useful for situations where the instantiator makes a secondary request, the key for which should be retained by the initial requestor: +-----------+ +--------------+ +--------------+ | | | | | | | Requestor |------->| Instantiator |------->| Instantiator | | | | | | | +-----------+ +--------------+ +--------------+ request_key() request_key() This might be useful, for example, in Kerberos, where the requestor requests a ticket, and then the ticket instantiator requests the TGT, which someone else then has to go and fetch. The TGT, however, should be retained in the keyrings of the requestor, not the first instantiator. To make this explict an extra special keyring constant is also added. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <jmorris@namei.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 16:39:14 -07:00
key_put(dest_keyring);
[PATCH] keys: Permit running process to instantiate keys Make it possible for a running process (such as gssapid) to be able to instantiate a key, as was requested by Trond Myklebust for NFS4. The patch makes the following changes: (1) A new, optional key type method has been added. This permits a key type to intercept requests at the point /sbin/request-key is about to be spawned and do something else with them - passing them over the rpc_pipefs files or netlink sockets for instance. The uninstantiated key, the authorisation key and the intended operation name are passed to the method. (2) The callout_info is no longer passed as an argument to /sbin/request-key to prevent unauthorised viewing of this data using ps or by looking in /proc/pid/cmdline. This means that the old /sbin/request-key program will not work with the patched kernel as it will expect to see an extra argument that is no longer there. A revised keyutils package will be made available tomorrow. (3) The callout_info is now attached to the authorisation key. Reading this key will retrieve the information. (4) A new field has been added to the task_struct. This holds the authorisation key currently active for a thread. Searches now look here for the caller's set of keys rather than looking for an auth key in the lowest level of the session keyring. This permits a thread to be servicing multiple requests at once and to switch between them. Note that this is per-thread, not per-process, and so is usable in multithreaded programs. The setting of this field is inherited across fork and exec. (5) A new keyctl function (KEYCTL_ASSUME_AUTHORITY) has been added that permits a thread to assume the authority to deal with an uninstantiated key. Assumption is only permitted if the authorisation key associated with the uninstantiated key is somewhere in the thread's keyrings. This function can also clear the assumption. (6) A new magic key specifier has been added to refer to the currently assumed authorisation key (KEY_SPEC_REQKEY_AUTH_KEY). (7) Instantiation will only proceed if the appropriate authorisation key is assumed first. The assumed authorisation key is discarded if instantiation is successful. (8) key_validate() is moved from the file of request_key functions to the file of permissions functions. (9) The documentation is updated. From: <Valdis.Kletnieks@vt.edu> Build fix. Signed-off-by: David Howells <dhowells@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Alexander Zangerl <az@bond.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:02:47 -07:00
/* discard the assumed authority if it's just been disabled by
* instantiation of the key */
CRED: Inaugurate COW credentials Inaugurate copy-on-write credentials management. This uses RCU to manage the credentials pointer in the task_struct with respect to accesses by other tasks. A process may only modify its own credentials, and so does not need locking to access or modify its own credentials. A mutex (cred_replace_mutex) is added to the task_struct to control the effect of PTRACE_ATTACHED on credential calculations, particularly with respect to execve(). With this patch, the contents of an active credentials struct may not be changed directly; rather a new set of credentials must be prepared, modified and committed using something like the following sequence of events: struct cred *new = prepare_creds(); int ret = blah(new); if (ret < 0) { abort_creds(new); return ret; } return commit_creds(new); There are some exceptions to this rule: the keyrings pointed to by the active credentials may be instantiated - keyrings violate the COW rule as managing COW keyrings is tricky, given that it is possible for a task to directly alter the keys in a keyring in use by another task. To help enforce this, various pointers to sets of credentials, such as those in the task_struct, are declared const. The purpose of this is compile-time discouragement of altering credentials through those pointers. Once a set of credentials has been made public through one of these pointers, it may not be modified, except under special circumstances: (1) Its reference count may incremented and decremented. (2) The keyrings to which it points may be modified, but not replaced. The only safe way to modify anything else is to create a replacement and commit using the functions described in Documentation/credentials.txt (which will be added by a later patch). This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). This now prepares and commits credentials in various places in the security code rather than altering the current creds directly. (2) Temporary credential overrides. do_coredump() and sys_faccessat() now prepare their own credentials and temporarily override the ones currently on the acting thread, whilst preventing interference from other threads by holding cred_replace_mutex on the thread being dumped. This will be replaced in a future patch by something that hands down the credentials directly to the functions being called, rather than altering the task's objective credentials. (3) LSM interface. A number of functions have been changed, added or removed: (*) security_capset_check(), ->capset_check() (*) security_capset_set(), ->capset_set() Removed in favour of security_capset(). (*) security_capset(), ->capset() New. This is passed a pointer to the new creds, a pointer to the old creds and the proposed capability sets. It should fill in the new creds or return an error. All pointers, barring the pointer to the new creds, are now const. (*) security_bprm_apply_creds(), ->bprm_apply_creds() Changed; now returns a value, which will cause the process to be killed if it's an error. (*) security_task_alloc(), ->task_alloc_security() Removed in favour of security_prepare_creds(). (*) security_cred_free(), ->cred_free() New. Free security data attached to cred->security. (*) security_prepare_creds(), ->cred_prepare() New. Duplicate any security data attached to cred->security. (*) security_commit_creds(), ->cred_commit() New. Apply any security effects for the upcoming installation of new security by commit_creds(). (*) security_task_post_setuid(), ->task_post_setuid() Removed in favour of security_task_fix_setuid(). (*) security_task_fix_setuid(), ->task_fix_setuid() Fix up the proposed new credentials for setuid(). This is used by cap_set_fix_setuid() to implicitly adjust capabilities in line with setuid() changes. Changes are made to the new credentials, rather than the task itself as in security_task_post_setuid(). (*) security_task_reparent_to_init(), ->task_reparent_to_init() Removed. Instead the task being reparented to init is referred directly to init's credentials. NOTE! This results in the loss of some state: SELinux's osid no longer records the sid of the thread that forked it. (*) security_key_alloc(), ->key_alloc() (*) security_key_permission(), ->key_permission() Changed. These now take cred pointers rather than task pointers to refer to the security context. (4) sys_capset(). This has been simplified and uses less locking. The LSM functions it calls have been merged. (5) reparent_to_kthreadd(). This gives the current thread the same credentials as init by simply using commit_thread() to point that way. (6) __sigqueue_alloc() and switch_uid() __sigqueue_alloc() can't stop the target task from changing its creds beneath it, so this function gets a reference to the currently applicable user_struct which it then passes into the sigqueue struct it returns if successful. switch_uid() is now called from commit_creds(), and possibly should be folded into that. commit_creds() should take care of protecting __sigqueue_alloc(). (7) [sg]et[ug]id() and co and [sg]et_current_groups. The set functions now all use prepare_creds(), commit_creds() and abort_creds() to build and check a new set of credentials before applying it. security_task_set[ug]id() is called inside the prepared section. This guarantees that nothing else will affect the creds until we've finished. The calling of set_dumpable() has been moved into commit_creds(). Much of the functionality of set_user() has been moved into commit_creds(). The get functions all simply access the data directly. (8) security_task_prctl() and cap_task_prctl(). security_task_prctl() has been modified to return -ENOSYS if it doesn't want to handle a function, or otherwise return the return value directly rather than through an argument. Additionally, cap_task_prctl() now prepares a new set of credentials, even if it doesn't end up using it. (9) Keyrings. A number of changes have been made to the keyrings code: (a) switch_uid_keyring(), copy_keys(), exit_keys() and suid_keys() have all been dropped and built in to the credentials functions directly. They may want separating out again later. (b) key_alloc() and search_process_keyrings() now take a cred pointer rather than a task pointer to specify the security context. (c) copy_creds() gives a new thread within the same thread group a new thread keyring if its parent had one, otherwise it discards the thread keyring. (d) The authorisation key now points directly to the credentials to extend the search into rather pointing to the task that carries them. (e) Installing thread, process or session keyrings causes a new set of credentials to be created, even though it's not strictly necessary for process or session keyrings (they're shared). (10) Usermode helper. The usermode helper code now carries a cred struct pointer in its subprocess_info struct instead of a new session keyring pointer. This set of credentials is derived from init_cred and installed on the new process after it has been cloned. call_usermodehelper_setup() allocates the new credentials and call_usermodehelper_freeinfo() discards them if they haven't been used. A special cred function (prepare_usermodeinfo_creds()) is provided specifically for call_usermodehelper_setup() to call. call_usermodehelper_setkeys() adjusts the credentials to sport the supplied keyring as the new session keyring. (11) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) selinux_setprocattr() no longer does its check for whether the current ptracer can access processes with the new SID inside the lock that covers getting the ptracer's SID. Whilst this lock ensures that the check is done with the ptracer pinned, the result is only valid until the lock is released, so there's no point doing it inside the lock. (12) is_single_threaded(). This function has been extracted from selinux_setprocattr() and put into a file of its own in the lib/ directory as join_session_keyring() now wants to use it too. The code in SELinux just checked to see whether a task shared mm_structs with other tasks (CLONE_VM), but that isn't good enough. We really want to know if they're part of the same thread group (CLONE_THREAD). (13) nfsd. The NFS server daemon now has to use the COW credentials to set the credentials it is going to use. It really needs to pass the credentials down to the functions it calls, but it can't do that until other patches in this series have been applied. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 16:39:23 -07:00
if (ret == 0)
keyctl_change_reqkey_auth(NULL);
[PATCH] keys: Permit running process to instantiate keys Make it possible for a running process (such as gssapid) to be able to instantiate a key, as was requested by Trond Myklebust for NFS4. The patch makes the following changes: (1) A new, optional key type method has been added. This permits a key type to intercept requests at the point /sbin/request-key is about to be spawned and do something else with them - passing them over the rpc_pipefs files or netlink sockets for instance. The uninstantiated key, the authorisation key and the intended operation name are passed to the method. (2) The callout_info is no longer passed as an argument to /sbin/request-key to prevent unauthorised viewing of this data using ps or by looking in /proc/pid/cmdline. This means that the old /sbin/request-key program will not work with the patched kernel as it will expect to see an extra argument that is no longer there. A revised keyutils package will be made available tomorrow. (3) The callout_info is now attached to the authorisation key. Reading this key will retrieve the information. (4) A new field has been added to the task_struct. This holds the authorisation key currently active for a thread. Searches now look here for the caller's set of keys rather than looking for an auth key in the lowest level of the session keyring. This permits a thread to be servicing multiple requests at once and to switch between them. Note that this is per-thread, not per-process, and so is usable in multithreaded programs. The setting of this field is inherited across fork and exec. (5) A new keyctl function (KEYCTL_ASSUME_AUTHORITY) has been added that permits a thread to assume the authority to deal with an uninstantiated key. Assumption is only permitted if the authorisation key associated with the uninstantiated key is somewhere in the thread's keyrings. This function can also clear the assumption. (6) A new magic key specifier has been added to refer to the currently assumed authorisation key (KEY_SPEC_REQKEY_AUTH_KEY). (7) Instantiation will only proceed if the appropriate authorisation key is assumed first. The assumed authorisation key is discarded if instantiation is successful. (8) key_validate() is moved from the file of request_key functions to the file of permissions functions. (9) The documentation is updated. From: <Valdis.Kletnieks@vt.edu> Build fix. Signed-off-by: David Howells <dhowells@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Alexander Zangerl <az@bond.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:02:47 -07:00
error2:
if (payload) {
memzero_explicit(payload, plen);
kvfree(payload);
}
[PATCH] keys: Permit running process to instantiate keys Make it possible for a running process (such as gssapid) to be able to instantiate a key, as was requested by Trond Myklebust for NFS4. The patch makes the following changes: (1) A new, optional key type method has been added. This permits a key type to intercept requests at the point /sbin/request-key is about to be spawned and do something else with them - passing them over the rpc_pipefs files or netlink sockets for instance. The uninstantiated key, the authorisation key and the intended operation name are passed to the method. (2) The callout_info is no longer passed as an argument to /sbin/request-key to prevent unauthorised viewing of this data using ps or by looking in /proc/pid/cmdline. This means that the old /sbin/request-key program will not work with the patched kernel as it will expect to see an extra argument that is no longer there. A revised keyutils package will be made available tomorrow. (3) The callout_info is now attached to the authorisation key. Reading this key will retrieve the information. (4) A new field has been added to the task_struct. This holds the authorisation key currently active for a thread. Searches now look here for the caller's set of keys rather than looking for an auth key in the lowest level of the session keyring. This permits a thread to be servicing multiple requests at once and to switch between them. Note that this is per-thread, not per-process, and so is usable in multithreaded programs. The setting of this field is inherited across fork and exec. (5) A new keyctl function (KEYCTL_ASSUME_AUTHORITY) has been added that permits a thread to assume the authority to deal with an uninstantiated key. Assumption is only permitted if the authorisation key associated with the uninstantiated key is somewhere in the thread's keyrings. This function can also clear the assumption. (6) A new magic key specifier has been added to refer to the currently assumed authorisation key (KEY_SPEC_REQKEY_AUTH_KEY). (7) Instantiation will only proceed if the appropriate authorisation key is assumed first. The assumed authorisation key is discarded if instantiation is successful. (8) key_validate() is moved from the file of request_key functions to the file of permissions functions. (9) The documentation is updated. From: <Valdis.Kletnieks@vt.edu> Build fix. Signed-off-by: David Howells <dhowells@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Alexander Zangerl <az@bond.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:02:47 -07:00
error:
return ret;
}
/*
* Instantiate a key with the specified payload and link the key into the
* destination keyring if one is given.
*
* The caller must have the appropriate instantiation permit set for this to
* work (see keyctl_assume_authority). No other permissions are required.
*
* If successful, 0 will be returned.
*/
long keyctl_instantiate_key(key_serial_t id,
const void __user *_payload,
size_t plen,
key_serial_t ringid)
{
if (_payload && plen) {
struct iovec iov;
struct iov_iter from;
int ret;
ret = import_single_range(WRITE, (void __user *)_payload, plen,
&iov, &from);
if (unlikely(ret))
return ret;
return keyctl_instantiate_key_common(id, &from, ringid);
}
return keyctl_instantiate_key_common(id, NULL, ringid);
}
/*
* Instantiate a key with the specified multipart payload and link the key into
* the destination keyring if one is given.
*
* The caller must have the appropriate instantiation permit set for this to
* work (see keyctl_assume_authority). No other permissions are required.
*
* If successful, 0 will be returned.
*/
long keyctl_instantiate_key_iov(key_serial_t id,
const struct iovec __user *_payload_iov,
unsigned ioc,
key_serial_t ringid)
{
struct iovec iovstack[UIO_FASTIOV], *iov = iovstack;
struct iov_iter from;
long ret;
if (!_payload_iov)
ioc = 0;
ret = import_iovec(WRITE, _payload_iov, ioc,
ARRAY_SIZE(iovstack), &iov, &from);
if (ret < 0)
return ret;
ret = keyctl_instantiate_key_common(id, &from, ringid);
kfree(iov);
return ret;
}
/*
* Negatively instantiate the key with the given timeout (in seconds) and link
* the key into the destination keyring if one is given.
*
* The caller must have the appropriate instantiation permit set for this to
* work (see keyctl_assume_authority). No other permissions are required.
*
* The key and any links to the key will be automatically garbage collected
* after the timeout expires.
*
* Negative keys are used to rate limit repeated request_key() calls by causing
* them to return -ENOKEY until the negative key expires.
*
* If successful, 0 will be returned.
*/
long keyctl_negate_key(key_serial_t id, unsigned timeout, key_serial_t ringid)
{
return keyctl_reject_key(id, timeout, ENOKEY, ringid);
}
/*
* Negatively instantiate the key with the given timeout (in seconds) and error
* code and link the key into the destination keyring if one is given.
*
* The caller must have the appropriate instantiation permit set for this to
* work (see keyctl_assume_authority). No other permissions are required.
*
* The key and any links to the key will be automatically garbage collected
* after the timeout expires.
*
* Negative keys are used to rate limit repeated request_key() calls by causing
* them to return the specified error code until the negative key expires.
*
* If successful, 0 will be returned.
*/
long keyctl_reject_key(key_serial_t id, unsigned timeout, unsigned error,
key_serial_t ringid)
{
CRED: Inaugurate COW credentials Inaugurate copy-on-write credentials management. This uses RCU to manage the credentials pointer in the task_struct with respect to accesses by other tasks. A process may only modify its own credentials, and so does not need locking to access or modify its own credentials. A mutex (cred_replace_mutex) is added to the task_struct to control the effect of PTRACE_ATTACHED on credential calculations, particularly with respect to execve(). With this patch, the contents of an active credentials struct may not be changed directly; rather a new set of credentials must be prepared, modified and committed using something like the following sequence of events: struct cred *new = prepare_creds(); int ret = blah(new); if (ret < 0) { abort_creds(new); return ret; } return commit_creds(new); There are some exceptions to this rule: the keyrings pointed to by the active credentials may be instantiated - keyrings violate the COW rule as managing COW keyrings is tricky, given that it is possible for a task to directly alter the keys in a keyring in use by another task. To help enforce this, various pointers to sets of credentials, such as those in the task_struct, are declared const. The purpose of this is compile-time discouragement of altering credentials through those pointers. Once a set of credentials has been made public through one of these pointers, it may not be modified, except under special circumstances: (1) Its reference count may incremented and decremented. (2) The keyrings to which it points may be modified, but not replaced. The only safe way to modify anything else is to create a replacement and commit using the functions described in Documentation/credentials.txt (which will be added by a later patch). This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). This now prepares and commits credentials in various places in the security code rather than altering the current creds directly. (2) Temporary credential overrides. do_coredump() and sys_faccessat() now prepare their own credentials and temporarily override the ones currently on the acting thread, whilst preventing interference from other threads by holding cred_replace_mutex on the thread being dumped. This will be replaced in a future patch by something that hands down the credentials directly to the functions being called, rather than altering the task's objective credentials. (3) LSM interface. A number of functions have been changed, added or removed: (*) security_capset_check(), ->capset_check() (*) security_capset_set(), ->capset_set() Removed in favour of security_capset(). (*) security_capset(), ->capset() New. This is passed a pointer to the new creds, a pointer to the old creds and the proposed capability sets. It should fill in the new creds or return an error. All pointers, barring the pointer to the new creds, are now const. (*) security_bprm_apply_creds(), ->bprm_apply_creds() Changed; now returns a value, which will cause the process to be killed if it's an error. (*) security_task_alloc(), ->task_alloc_security() Removed in favour of security_prepare_creds(). (*) security_cred_free(), ->cred_free() New. Free security data attached to cred->security. (*) security_prepare_creds(), ->cred_prepare() New. Duplicate any security data attached to cred->security. (*) security_commit_creds(), ->cred_commit() New. Apply any security effects for the upcoming installation of new security by commit_creds(). (*) security_task_post_setuid(), ->task_post_setuid() Removed in favour of security_task_fix_setuid(). (*) security_task_fix_setuid(), ->task_fix_setuid() Fix up the proposed new credentials for setuid(). This is used by cap_set_fix_setuid() to implicitly adjust capabilities in line with setuid() changes. Changes are made to the new credentials, rather than the task itself as in security_task_post_setuid(). (*) security_task_reparent_to_init(), ->task_reparent_to_init() Removed. Instead the task being reparented to init is referred directly to init's credentials. NOTE! This results in the loss of some state: SELinux's osid no longer records the sid of the thread that forked it. (*) security_key_alloc(), ->key_alloc() (*) security_key_permission(), ->key_permission() Changed. These now take cred pointers rather than task pointers to refer to the security context. (4) sys_capset(). This has been simplified and uses less locking. The LSM functions it calls have been merged. (5) reparent_to_kthreadd(). This gives the current thread the same credentials as init by simply using commit_thread() to point that way. (6) __sigqueue_alloc() and switch_uid() __sigqueue_alloc() can't stop the target task from changing its creds beneath it, so this function gets a reference to the currently applicable user_struct which it then passes into the sigqueue struct it returns if successful. switch_uid() is now called from commit_creds(), and possibly should be folded into that. commit_creds() should take care of protecting __sigqueue_alloc(). (7) [sg]et[ug]id() and co and [sg]et_current_groups. The set functions now all use prepare_creds(), commit_creds() and abort_creds() to build and check a new set of credentials before applying it. security_task_set[ug]id() is called inside the prepared section. This guarantees that nothing else will affect the creds until we've finished. The calling of set_dumpable() has been moved into commit_creds(). Much of the functionality of set_user() has been moved into commit_creds(). The get functions all simply access the data directly. (8) security_task_prctl() and cap_task_prctl(). security_task_prctl() has been modified to return -ENOSYS if it doesn't want to handle a function, or otherwise return the return value directly rather than through an argument. Additionally, cap_task_prctl() now prepares a new set of credentials, even if it doesn't end up using it. (9) Keyrings. A number of changes have been made to the keyrings code: (a) switch_uid_keyring(), copy_keys(), exit_keys() and suid_keys() have all been dropped and built in to the credentials functions directly. They may want separating out again later. (b) key_alloc() and search_process_keyrings() now take a cred pointer rather than a task pointer to specify the security context. (c) copy_creds() gives a new thread within the same thread group a new thread keyring if its parent had one, otherwise it discards the thread keyring. (d) The authorisation key now points directly to the credentials to extend the search into rather pointing to the task that carries them. (e) Installing thread, process or session keyrings causes a new set of credentials to be created, even though it's not strictly necessary for process or session keyrings (they're shared). (10) Usermode helper. The usermode helper code now carries a cred struct pointer in its subprocess_info struct instead of a new session keyring pointer. This set of credentials is derived from init_cred and installed on the new process after it has been cloned. call_usermodehelper_setup() allocates the new credentials and call_usermodehelper_freeinfo() discards them if they haven't been used. A special cred function (prepare_usermodeinfo_creds()) is provided specifically for call_usermodehelper_setup() to call. call_usermodehelper_setkeys() adjusts the credentials to sport the supplied keyring as the new session keyring. (11) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) selinux_setprocattr() no longer does its check for whether the current ptracer can access processes with the new SID inside the lock that covers getting the ptracer's SID. Whilst this lock ensures that the check is done with the ptracer pinned, the result is only valid until the lock is released, so there's no point doing it inside the lock. (12) is_single_threaded(). This function has been extracted from selinux_setprocattr() and put into a file of its own in the lib/ directory as join_session_keyring() now wants to use it too. The code in SELinux just checked to see whether a task shared mm_structs with other tasks (CLONE_VM), but that isn't good enough. We really want to know if they're part of the same thread group (CLONE_THREAD). (13) nfsd. The NFS server daemon now has to use the COW credentials to set the credentials it is going to use. It really needs to pass the credentials down to the functions it calls, but it can't do that until other patches in this series have been applied. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 16:39:23 -07:00
const struct cred *cred = current_cred();
[PATCH] Keys: Make request-key create an authorisation key The attached patch makes the following changes: (1) There's a new special key type called ".request_key_auth". This is an authorisation key for when one process requests a key and another process is started to construct it. This type of key cannot be created by the user; nor can it be requested by kernel services. Authorisation keys hold two references: (a) Each refers to a key being constructed. When the key being constructed is instantiated the authorisation key is revoked, rendering it of no further use. (b) The "authorising process". This is either: (i) the process that called request_key(), or: (ii) if the process that called request_key() itself had an authorisation key in its session keyring, then the authorising process referred to by that authorisation key will also be referred to by the new authorisation key. This means that the process that initiated a chain of key requests will authorise the lot of them, and will, by default, wind up with the keys obtained from them in its keyrings. (2) request_key() creates an authorisation key which is then passed to /sbin/request-key in as part of a new session keyring. (3) When request_key() is searching for a key to hand back to the caller, if it comes across an authorisation key in the session keyring of the calling process, it will also search the keyrings of the process specified therein and it will use the specified process's credentials (fsuid, fsgid, groups) to do that rather than the calling process's credentials. This allows a process started by /sbin/request-key to find keys belonging to the authorising process. (4) A key can be read, even if the process executing KEYCTL_READ doesn't have direct read or search permission if that key is contained within the keyrings of a process specified by an authorisation key found within the calling process's session keyring, and is searchable using the credentials of the authorising process. This allows a process started by /sbin/request-key to read keys belonging to the authorising process. (5) The magic KEY_SPEC_*_KEYRING key IDs when passed to KEYCTL_INSTANTIATE or KEYCTL_NEGATE will specify a keyring of the authorising process, rather than the process doing the instantiation. (6) One of the process keyrings can be nominated as the default to which request_key() should attach new keys if not otherwise specified. This is done with KEYCTL_SET_REQKEY_KEYRING and one of the KEY_REQKEY_DEFL_* constants. The current setting can also be read using this call. (7) request_key() is partially interruptible. If it is waiting for another process to finish constructing a key, it can be interrupted. This permits a request-key cycle to be broken without recourse to rebooting. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-Off-By: Benoit Boissinot <benoit.boissinot@ens-lyon.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 23:00:56 -06:00
struct request_key_auth *rka;
KEYS: Alter use of key instantiation link-to-keyring argument Alter the use of the key instantiation and negation functions' link-to-keyring arguments. Currently this specifies a keyring in the target process to link the key into, creating the keyring if it doesn't exist. This, however, can be a problem for copy-on-write credentials as it means that the instantiating process can alter the credentials of the requesting process. This patch alters the behaviour such that: (1) If keyctl_instantiate_key() or keyctl_negate_key() are given a specific keyring by ID (ringid >= 0), then that keyring will be used. (2) If keyctl_instantiate_key() or keyctl_negate_key() are given one of the special constants that refer to the requesting process's keyrings (KEY_SPEC_*_KEYRING, all <= 0), then: (a) If sys_request_key() was given a keyring to use (destringid) then the key will be attached to that keyring. (b) If sys_request_key() was given a NULL keyring, then the key being instantiated will be attached to the default keyring as set by keyctl_set_reqkey_keyring(). (3) No extra link will be made. Decision point (1) follows current behaviour, and allows those instantiators who've searched for a specifically named keyring in the requestor's keyring so as to partition the keys by type to still have their named keyrings. Decision point (2) allows the requestor to make sure that the key or keys that get produced by request_key() go where they want, whilst allowing the instantiator to request that the key is retained. This is mainly useful for situations where the instantiator makes a secondary request, the key for which should be retained by the initial requestor: +-----------+ +--------------+ +--------------+ | | | | | | | Requestor |------->| Instantiator |------->| Instantiator | | | | | | | +-----------+ +--------------+ +--------------+ request_key() request_key() This might be useful, for example, in Kerberos, where the requestor requests a ticket, and then the ticket instantiator requests the TGT, which someone else then has to go and fetch. The TGT, however, should be retained in the keyrings of the requestor, not the first instantiator. To make this explict an extra special keyring constant is also added. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <jmorris@namei.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 16:39:14 -07:00
struct key *instkey, *dest_keyring;
long ret;
kenter("%d,%u,%u,%d", id, timeout, error, ringid);
/* must be a valid error code and mustn't be a kernel special */
if (error <= 0 ||
error >= MAX_ERRNO ||
error == ERESTARTSYS ||
error == ERESTARTNOINTR ||
error == ERESTARTNOHAND ||
error == ERESTART_RESTARTBLOCK)
return -EINVAL;
CRED: Inaugurate COW credentials Inaugurate copy-on-write credentials management. This uses RCU to manage the credentials pointer in the task_struct with respect to accesses by other tasks. A process may only modify its own credentials, and so does not need locking to access or modify its own credentials. A mutex (cred_replace_mutex) is added to the task_struct to control the effect of PTRACE_ATTACHED on credential calculations, particularly with respect to execve(). With this patch, the contents of an active credentials struct may not be changed directly; rather a new set of credentials must be prepared, modified and committed using something like the following sequence of events: struct cred *new = prepare_creds(); int ret = blah(new); if (ret < 0) { abort_creds(new); return ret; } return commit_creds(new); There are some exceptions to this rule: the keyrings pointed to by the active credentials may be instantiated - keyrings violate the COW rule as managing COW keyrings is tricky, given that it is possible for a task to directly alter the keys in a keyring in use by another task. To help enforce this, various pointers to sets of credentials, such as those in the task_struct, are declared const. The purpose of this is compile-time discouragement of altering credentials through those pointers. Once a set of credentials has been made public through one of these pointers, it may not be modified, except under special circumstances: (1) Its reference count may incremented and decremented. (2) The keyrings to which it points may be modified, but not replaced. The only safe way to modify anything else is to create a replacement and commit using the functions described in Documentation/credentials.txt (which will be added by a later patch). This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). This now prepares and commits credentials in various places in the security code rather than altering the current creds directly. (2) Temporary credential overrides. do_coredump() and sys_faccessat() now prepare their own credentials and temporarily override the ones currently on the acting thread, whilst preventing interference from other threads by holding cred_replace_mutex on the thread being dumped. This will be replaced in a future patch by something that hands down the credentials directly to the functions being called, rather than altering the task's objective credentials. (3) LSM interface. A number of functions have been changed, added or removed: (*) security_capset_check(), ->capset_check() (*) security_capset_set(), ->capset_set() Removed in favour of security_capset(). (*) security_capset(), ->capset() New. This is passed a pointer to the new creds, a pointer to the old creds and the proposed capability sets. It should fill in the new creds or return an error. All pointers, barring the pointer to the new creds, are now const. (*) security_bprm_apply_creds(), ->bprm_apply_creds() Changed; now returns a value, which will cause the process to be killed if it's an error. (*) security_task_alloc(), ->task_alloc_security() Removed in favour of security_prepare_creds(). (*) security_cred_free(), ->cred_free() New. Free security data attached to cred->security. (*) security_prepare_creds(), ->cred_prepare() New. Duplicate any security data attached to cred->security. (*) security_commit_creds(), ->cred_commit() New. Apply any security effects for the upcoming installation of new security by commit_creds(). (*) security_task_post_setuid(), ->task_post_setuid() Removed in favour of security_task_fix_setuid(). (*) security_task_fix_setuid(), ->task_fix_setuid() Fix up the proposed new credentials for setuid(). This is used by cap_set_fix_setuid() to implicitly adjust capabilities in line with setuid() changes. Changes are made to the new credentials, rather than the task itself as in security_task_post_setuid(). (*) security_task_reparent_to_init(), ->task_reparent_to_init() Removed. Instead the task being reparented to init is referred directly to init's credentials. NOTE! This results in the loss of some state: SELinux's osid no longer records the sid of the thread that forked it. (*) security_key_alloc(), ->key_alloc() (*) security_key_permission(), ->key_permission() Changed. These now take cred pointers rather than task pointers to refer to the security context. (4) sys_capset(). This has been simplified and uses less locking. The LSM functions it calls have been merged. (5) reparent_to_kthreadd(). This gives the current thread the same credentials as init by simply using commit_thread() to point that way. (6) __sigqueue_alloc() and switch_uid() __sigqueue_alloc() can't stop the target task from changing its creds beneath it, so this function gets a reference to the currently applicable user_struct which it then passes into the sigqueue struct it returns if successful. switch_uid() is now called from commit_creds(), and possibly should be folded into that. commit_creds() should take care of protecting __sigqueue_alloc(). (7) [sg]et[ug]id() and co and [sg]et_current_groups. The set functions now all use prepare_creds(), commit_creds() and abort_creds() to build and check a new set of credentials before applying it. security_task_set[ug]id() is called inside the prepared section. This guarantees that nothing else will affect the creds until we've finished. The calling of set_dumpable() has been moved into commit_creds(). Much of the functionality of set_user() has been moved into commit_creds(). The get functions all simply access the data directly. (8) security_task_prctl() and cap_task_prctl(). security_task_prctl() has been modified to return -ENOSYS if it doesn't want to handle a function, or otherwise return the return value directly rather than through an argument. Additionally, cap_task_prctl() now prepares a new set of credentials, even if it doesn't end up using it. (9) Keyrings. A number of changes have been made to the keyrings code: (a) switch_uid_keyring(), copy_keys(), exit_keys() and suid_keys() have all been dropped and built in to the credentials functions directly. They may want separating out again later. (b) key_alloc() and search_process_keyrings() now take a cred pointer rather than a task pointer to specify the security context. (c) copy_creds() gives a new thread within the same thread group a new thread keyring if its parent had one, otherwise it discards the thread keyring. (d) The authorisation key now points directly to the credentials to extend the search into rather pointing to the task that carries them. (e) Installing thread, process or session keyrings causes a new set of credentials to be created, even though it's not strictly necessary for process or session keyrings (they're shared). (10) Usermode helper. The usermode helper code now carries a cred struct pointer in its subprocess_info struct instead of a new session keyring pointer. This set of credentials is derived from init_cred and installed on the new process after it has been cloned. call_usermodehelper_setup() allocates the new credentials and call_usermodehelper_freeinfo() discards them if they haven't been used. A special cred function (prepare_usermodeinfo_creds()) is provided specifically for call_usermodehelper_setup() to call. call_usermodehelper_setkeys() adjusts the credentials to sport the supplied keyring as the new session keyring. (11) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) selinux_setprocattr() no longer does its check for whether the current ptracer can access processes with the new SID inside the lock that covers getting the ptracer's SID. Whilst this lock ensures that the check is done with the ptracer pinned, the result is only valid until the lock is released, so there's no point doing it inside the lock. (12) is_single_threaded(). This function has been extracted from selinux_setprocattr() and put into a file of its own in the lib/ directory as join_session_keyring() now wants to use it too. The code in SELinux just checked to see whether a task shared mm_structs with other tasks (CLONE_VM), but that isn't good enough. We really want to know if they're part of the same thread group (CLONE_THREAD). (13) nfsd. The NFS server daemon now has to use the COW credentials to set the credentials it is going to use. It really needs to pass the credentials down to the functions it calls, but it can't do that until other patches in this series have been applied. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 16:39:23 -07:00
[PATCH] keys: Permit running process to instantiate keys Make it possible for a running process (such as gssapid) to be able to instantiate a key, as was requested by Trond Myklebust for NFS4. The patch makes the following changes: (1) A new, optional key type method has been added. This permits a key type to intercept requests at the point /sbin/request-key is about to be spawned and do something else with them - passing them over the rpc_pipefs files or netlink sockets for instance. The uninstantiated key, the authorisation key and the intended operation name are passed to the method. (2) The callout_info is no longer passed as an argument to /sbin/request-key to prevent unauthorised viewing of this data using ps or by looking in /proc/pid/cmdline. This means that the old /sbin/request-key program will not work with the patched kernel as it will expect to see an extra argument that is no longer there. A revised keyutils package will be made available tomorrow. (3) The callout_info is now attached to the authorisation key. Reading this key will retrieve the information. (4) A new field has been added to the task_struct. This holds the authorisation key currently active for a thread. Searches now look here for the caller's set of keys rather than looking for an auth key in the lowest level of the session keyring. This permits a thread to be servicing multiple requests at once and to switch between them. Note that this is per-thread, not per-process, and so is usable in multithreaded programs. The setting of this field is inherited across fork and exec. (5) A new keyctl function (KEYCTL_ASSUME_AUTHORITY) has been added that permits a thread to assume the authority to deal with an uninstantiated key. Assumption is only permitted if the authorisation key associated with the uninstantiated key is somewhere in the thread's keyrings. This function can also clear the assumption. (6) A new magic key specifier has been added to refer to the currently assumed authorisation key (KEY_SPEC_REQKEY_AUTH_KEY). (7) Instantiation will only proceed if the appropriate authorisation key is assumed first. The assumed authorisation key is discarded if instantiation is successful. (8) key_validate() is moved from the file of request_key functions to the file of permissions functions. (9) The documentation is updated. From: <Valdis.Kletnieks@vt.edu> Build fix. Signed-off-by: David Howells <dhowells@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Alexander Zangerl <az@bond.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:02:47 -07:00
/* the appropriate instantiation authorisation key must have been
* assumed before calling this */
ret = -EPERM;
CRED: Inaugurate COW credentials Inaugurate copy-on-write credentials management. This uses RCU to manage the credentials pointer in the task_struct with respect to accesses by other tasks. A process may only modify its own credentials, and so does not need locking to access or modify its own credentials. A mutex (cred_replace_mutex) is added to the task_struct to control the effect of PTRACE_ATTACHED on credential calculations, particularly with respect to execve(). With this patch, the contents of an active credentials struct may not be changed directly; rather a new set of credentials must be prepared, modified and committed using something like the following sequence of events: struct cred *new = prepare_creds(); int ret = blah(new); if (ret < 0) { abort_creds(new); return ret; } return commit_creds(new); There are some exceptions to this rule: the keyrings pointed to by the active credentials may be instantiated - keyrings violate the COW rule as managing COW keyrings is tricky, given that it is possible for a task to directly alter the keys in a keyring in use by another task. To help enforce this, various pointers to sets of credentials, such as those in the task_struct, are declared const. The purpose of this is compile-time discouragement of altering credentials through those pointers. Once a set of credentials has been made public through one of these pointers, it may not be modified, except under special circumstances: (1) Its reference count may incremented and decremented. (2) The keyrings to which it points may be modified, but not replaced. The only safe way to modify anything else is to create a replacement and commit using the functions described in Documentation/credentials.txt (which will be added by a later patch). This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). This now prepares and commits credentials in various places in the security code rather than altering the current creds directly. (2) Temporary credential overrides. do_coredump() and sys_faccessat() now prepare their own credentials and temporarily override the ones currently on the acting thread, whilst preventing interference from other threads by holding cred_replace_mutex on the thread being dumped. This will be replaced in a future patch by something that hands down the credentials directly to the functions being called, rather than altering the task's objective credentials. (3) LSM interface. A number of functions have been changed, added or removed: (*) security_capset_check(), ->capset_check() (*) security_capset_set(), ->capset_set() Removed in favour of security_capset(). (*) security_capset(), ->capset() New. This is passed a pointer to the new creds, a pointer to the old creds and the proposed capability sets. It should fill in the new creds or return an error. All pointers, barring the pointer to the new creds, are now const. (*) security_bprm_apply_creds(), ->bprm_apply_creds() Changed; now returns a value, which will cause the process to be killed if it's an error. (*) security_task_alloc(), ->task_alloc_security() Removed in favour of security_prepare_creds(). (*) security_cred_free(), ->cred_free() New. Free security data attached to cred->security. (*) security_prepare_creds(), ->cred_prepare() New. Duplicate any security data attached to cred->security. (*) security_commit_creds(), ->cred_commit() New. Apply any security effects for the upcoming installation of new security by commit_creds(). (*) security_task_post_setuid(), ->task_post_setuid() Removed in favour of security_task_fix_setuid(). (*) security_task_fix_setuid(), ->task_fix_setuid() Fix up the proposed new credentials for setuid(). This is used by cap_set_fix_setuid() to implicitly adjust capabilities in line with setuid() changes. Changes are made to the new credentials, rather than the task itself as in security_task_post_setuid(). (*) security_task_reparent_to_init(), ->task_reparent_to_init() Removed. Instead the task being reparented to init is referred directly to init's credentials. NOTE! This results in the loss of some state: SELinux's osid no longer records the sid of the thread that forked it. (*) security_key_alloc(), ->key_alloc() (*) security_key_permission(), ->key_permission() Changed. These now take cred pointers rather than task pointers to refer to the security context. (4) sys_capset(). This has been simplified and uses less locking. The LSM functions it calls have been merged. (5) reparent_to_kthreadd(). This gives the current thread the same credentials as init by simply using commit_thread() to point that way. (6) __sigqueue_alloc() and switch_uid() __sigqueue_alloc() can't stop the target task from changing its creds beneath it, so this function gets a reference to the currently applicable user_struct which it then passes into the sigqueue struct it returns if successful. switch_uid() is now called from commit_creds(), and possibly should be folded into that. commit_creds() should take care of protecting __sigqueue_alloc(). (7) [sg]et[ug]id() and co and [sg]et_current_groups. The set functions now all use prepare_creds(), commit_creds() and abort_creds() to build and check a new set of credentials before applying it. security_task_set[ug]id() is called inside the prepared section. This guarantees that nothing else will affect the creds until we've finished. The calling of set_dumpable() has been moved into commit_creds(). Much of the functionality of set_user() has been moved into commit_creds(). The get functions all simply access the data directly. (8) security_task_prctl() and cap_task_prctl(). security_task_prctl() has been modified to return -ENOSYS if it doesn't want to handle a function, or otherwise return the return value directly rather than through an argument. Additionally, cap_task_prctl() now prepares a new set of credentials, even if it doesn't end up using it. (9) Keyrings. A number of changes have been made to the keyrings code: (a) switch_uid_keyring(), copy_keys(), exit_keys() and suid_keys() have all been dropped and built in to the credentials functions directly. They may want separating out again later. (b) key_alloc() and search_process_keyrings() now take a cred pointer rather than a task pointer to specify the security context. (c) copy_creds() gives a new thread within the same thread group a new thread keyring if its parent had one, otherwise it discards the thread keyring. (d) The authorisation key now points directly to the credentials to extend the search into rather pointing to the task that carries them. (e) Installing thread, process or session keyrings causes a new set of credentials to be created, even though it's not strictly necessary for process or session keyrings (they're shared). (10) Usermode helper. The usermode helper code now carries a cred struct pointer in its subprocess_info struct instead of a new session keyring pointer. This set of credentials is derived from init_cred and installed on the new process after it has been cloned. call_usermodehelper_setup() allocates the new credentials and call_usermodehelper_freeinfo() discards them if they haven't been used. A special cred function (prepare_usermodeinfo_creds()) is provided specifically for call_usermodehelper_setup() to call. call_usermodehelper_setkeys() adjusts the credentials to sport the supplied keyring as the new session keyring. (11) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) selinux_setprocattr() no longer does its check for whether the current ptracer can access processes with the new SID inside the lock that covers getting the ptracer's SID. Whilst this lock ensures that the check is done with the ptracer pinned, the result is only valid until the lock is released, so there's no point doing it inside the lock. (12) is_single_threaded(). This function has been extracted from selinux_setprocattr() and put into a file of its own in the lib/ directory as join_session_keyring() now wants to use it too. The code in SELinux just checked to see whether a task shared mm_structs with other tasks (CLONE_VM), but that isn't good enough. We really want to know if they're part of the same thread group (CLONE_THREAD). (13) nfsd. The NFS server daemon now has to use the COW credentials to set the credentials it is going to use. It really needs to pass the credentials down to the functions it calls, but it can't do that until other patches in this series have been applied. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 16:39:23 -07:00
instkey = cred->request_key_auth;
[PATCH] keys: Permit running process to instantiate keys Make it possible for a running process (such as gssapid) to be able to instantiate a key, as was requested by Trond Myklebust for NFS4. The patch makes the following changes: (1) A new, optional key type method has been added. This permits a key type to intercept requests at the point /sbin/request-key is about to be spawned and do something else with them - passing them over the rpc_pipefs files or netlink sockets for instance. The uninstantiated key, the authorisation key and the intended operation name are passed to the method. (2) The callout_info is no longer passed as an argument to /sbin/request-key to prevent unauthorised viewing of this data using ps or by looking in /proc/pid/cmdline. This means that the old /sbin/request-key program will not work with the patched kernel as it will expect to see an extra argument that is no longer there. A revised keyutils package will be made available tomorrow. (3) The callout_info is now attached to the authorisation key. Reading this key will retrieve the information. (4) A new field has been added to the task_struct. This holds the authorisation key currently active for a thread. Searches now look here for the caller's set of keys rather than looking for an auth key in the lowest level of the session keyring. This permits a thread to be servicing multiple requests at once and to switch between them. Note that this is per-thread, not per-process, and so is usable in multithreaded programs. The setting of this field is inherited across fork and exec. (5) A new keyctl function (KEYCTL_ASSUME_AUTHORITY) has been added that permits a thread to assume the authority to deal with an uninstantiated key. Assumption is only permitted if the authorisation key associated with the uninstantiated key is somewhere in the thread's keyrings. This function can also clear the assumption. (6) A new magic key specifier has been added to refer to the currently assumed authorisation key (KEY_SPEC_REQKEY_AUTH_KEY). (7) Instantiation will only proceed if the appropriate authorisation key is assumed first. The assumed authorisation key is discarded if instantiation is successful. (8) key_validate() is moved from the file of request_key functions to the file of permissions functions. (9) The documentation is updated. From: <Valdis.Kletnieks@vt.edu> Build fix. Signed-off-by: David Howells <dhowells@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Alexander Zangerl <az@bond.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:02:47 -07:00
if (!instkey)
goto error;
rka = instkey->payload.data[0];
[PATCH] keys: Permit running process to instantiate keys Make it possible for a running process (such as gssapid) to be able to instantiate a key, as was requested by Trond Myklebust for NFS4. The patch makes the following changes: (1) A new, optional key type method has been added. This permits a key type to intercept requests at the point /sbin/request-key is about to be spawned and do something else with them - passing them over the rpc_pipefs files or netlink sockets for instance. The uninstantiated key, the authorisation key and the intended operation name are passed to the method. (2) The callout_info is no longer passed as an argument to /sbin/request-key to prevent unauthorised viewing of this data using ps or by looking in /proc/pid/cmdline. This means that the old /sbin/request-key program will not work with the patched kernel as it will expect to see an extra argument that is no longer there. A revised keyutils package will be made available tomorrow. (3) The callout_info is now attached to the authorisation key. Reading this key will retrieve the information. (4) A new field has been added to the task_struct. This holds the authorisation key currently active for a thread. Searches now look here for the caller's set of keys rather than looking for an auth key in the lowest level of the session keyring. This permits a thread to be servicing multiple requests at once and to switch between them. Note that this is per-thread, not per-process, and so is usable in multithreaded programs. The setting of this field is inherited across fork and exec. (5) A new keyctl function (KEYCTL_ASSUME_AUTHORITY) has been added that permits a thread to assume the authority to deal with an uninstantiated key. Assumption is only permitted if the authorisation key associated with the uninstantiated key is somewhere in the thread's keyrings. This function can also clear the assumption. (6) A new magic key specifier has been added to refer to the currently assumed authorisation key (KEY_SPEC_REQKEY_AUTH_KEY). (7) Instantiation will only proceed if the appropriate authorisation key is assumed first. The assumed authorisation key is discarded if instantiation is successful. (8) key_validate() is moved from the file of request_key functions to the file of permissions functions. (9) The documentation is updated. From: <Valdis.Kletnieks@vt.edu> Build fix. Signed-off-by: David Howells <dhowells@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Alexander Zangerl <az@bond.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:02:47 -07:00
if (rka->target_key->serial != id)
goto error;
[PATCH] Keys: Make request-key create an authorisation key The attached patch makes the following changes: (1) There's a new special key type called ".request_key_auth". This is an authorisation key for when one process requests a key and another process is started to construct it. This type of key cannot be created by the user; nor can it be requested by kernel services. Authorisation keys hold two references: (a) Each refers to a key being constructed. When the key being constructed is instantiated the authorisation key is revoked, rendering it of no further use. (b) The "authorising process". This is either: (i) the process that called request_key(), or: (ii) if the process that called request_key() itself had an authorisation key in its session keyring, then the authorising process referred to by that authorisation key will also be referred to by the new authorisation key. This means that the process that initiated a chain of key requests will authorise the lot of them, and will, by default, wind up with the keys obtained from them in its keyrings. (2) request_key() creates an authorisation key which is then passed to /sbin/request-key in as part of a new session keyring. (3) When request_key() is searching for a key to hand back to the caller, if it comes across an authorisation key in the session keyring of the calling process, it will also search the keyrings of the process specified therein and it will use the specified process's credentials (fsuid, fsgid, groups) to do that rather than the calling process's credentials. This allows a process started by /sbin/request-key to find keys belonging to the authorising process. (4) A key can be read, even if the process executing KEYCTL_READ doesn't have direct read or search permission if that key is contained within the keyrings of a process specified by an authorisation key found within the calling process's session keyring, and is searchable using the credentials of the authorising process. This allows a process started by /sbin/request-key to read keys belonging to the authorising process. (5) The magic KEY_SPEC_*_KEYRING key IDs when passed to KEYCTL_INSTANTIATE or KEYCTL_NEGATE will specify a keyring of the authorising process, rather than the process doing the instantiation. (6) One of the process keyrings can be nominated as the default to which request_key() should attach new keys if not otherwise specified. This is done with KEYCTL_SET_REQKEY_KEYRING and one of the KEY_REQKEY_DEFL_* constants. The current setting can also be read using this call. (7) request_key() is partially interruptible. If it is waiting for another process to finish constructing a key, it can be interrupted. This permits a request-key cycle to be broken without recourse to rebooting. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-Off-By: Benoit Boissinot <benoit.boissinot@ens-lyon.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 23:00:56 -06:00
/* find the destination keyring if present (which must also be
* writable) */
KEYS: Alter use of key instantiation link-to-keyring argument Alter the use of the key instantiation and negation functions' link-to-keyring arguments. Currently this specifies a keyring in the target process to link the key into, creating the keyring if it doesn't exist. This, however, can be a problem for copy-on-write credentials as it means that the instantiating process can alter the credentials of the requesting process. This patch alters the behaviour such that: (1) If keyctl_instantiate_key() or keyctl_negate_key() are given a specific keyring by ID (ringid >= 0), then that keyring will be used. (2) If keyctl_instantiate_key() or keyctl_negate_key() are given one of the special constants that refer to the requesting process's keyrings (KEY_SPEC_*_KEYRING, all <= 0), then: (a) If sys_request_key() was given a keyring to use (destringid) then the key will be attached to that keyring. (b) If sys_request_key() was given a NULL keyring, then the key being instantiated will be attached to the default keyring as set by keyctl_set_reqkey_keyring(). (3) No extra link will be made. Decision point (1) follows current behaviour, and allows those instantiators who've searched for a specifically named keyring in the requestor's keyring so as to partition the keys by type to still have their named keyrings. Decision point (2) allows the requestor to make sure that the key or keys that get produced by request_key() go where they want, whilst allowing the instantiator to request that the key is retained. This is mainly useful for situations where the instantiator makes a secondary request, the key for which should be retained by the initial requestor: +-----------+ +--------------+ +--------------+ | | | | | | | Requestor |------->| Instantiator |------->| Instantiator | | | | | | | +-----------+ +--------------+ +--------------+ request_key() request_key() This might be useful, for example, in Kerberos, where the requestor requests a ticket, and then the ticket instantiator requests the TGT, which someone else then has to go and fetch. The TGT, however, should be retained in the keyrings of the requestor, not the first instantiator. To make this explict an extra special keyring constant is also added. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <jmorris@namei.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 16:39:14 -07:00
ret = get_instantiation_keyring(ringid, rka, &dest_keyring);
if (ret < 0)
goto error;
/* instantiate the key and link it into a keyring */
ret = key_reject_and_link(rka->target_key, timeout, error,
KEYS: Alter use of key instantiation link-to-keyring argument Alter the use of the key instantiation and negation functions' link-to-keyring arguments. Currently this specifies a keyring in the target process to link the key into, creating the keyring if it doesn't exist. This, however, can be a problem for copy-on-write credentials as it means that the instantiating process can alter the credentials of the requesting process. This patch alters the behaviour such that: (1) If keyctl_instantiate_key() or keyctl_negate_key() are given a specific keyring by ID (ringid >= 0), then that keyring will be used. (2) If keyctl_instantiate_key() or keyctl_negate_key() are given one of the special constants that refer to the requesting process's keyrings (KEY_SPEC_*_KEYRING, all <= 0), then: (a) If sys_request_key() was given a keyring to use (destringid) then the key will be attached to that keyring. (b) If sys_request_key() was given a NULL keyring, then the key being instantiated will be attached to the default keyring as set by keyctl_set_reqkey_keyring(). (3) No extra link will be made. Decision point (1) follows current behaviour, and allows those instantiators who've searched for a specifically named keyring in the requestor's keyring so as to partition the keys by type to still have their named keyrings. Decision point (2) allows the requestor to make sure that the key or keys that get produced by request_key() go where they want, whilst allowing the instantiator to request that the key is retained. This is mainly useful for situations where the instantiator makes a secondary request, the key for which should be retained by the initial requestor: +-----------+ +--------------+ +--------------+ | | | | | | | Requestor |------->| Instantiator |------->| Instantiator | | | | | | | +-----------+ +--------------+ +--------------+ request_key() request_key() This might be useful, for example, in Kerberos, where the requestor requests a ticket, and then the ticket instantiator requests the TGT, which someone else then has to go and fetch. The TGT, however, should be retained in the keyrings of the requestor, not the first instantiator. To make this explict an extra special keyring constant is also added. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <jmorris@namei.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 16:39:14 -07:00
dest_keyring, instkey);
KEYS: Alter use of key instantiation link-to-keyring argument Alter the use of the key instantiation and negation functions' link-to-keyring arguments. Currently this specifies a keyring in the target process to link the key into, creating the keyring if it doesn't exist. This, however, can be a problem for copy-on-write credentials as it means that the instantiating process can alter the credentials of the requesting process. This patch alters the behaviour such that: (1) If keyctl_instantiate_key() or keyctl_negate_key() are given a specific keyring by ID (ringid >= 0), then that keyring will be used. (2) If keyctl_instantiate_key() or keyctl_negate_key() are given one of the special constants that refer to the requesting process's keyrings (KEY_SPEC_*_KEYRING, all <= 0), then: (a) If sys_request_key() was given a keyring to use (destringid) then the key will be attached to that keyring. (b) If sys_request_key() was given a NULL keyring, then the key being instantiated will be attached to the default keyring as set by keyctl_set_reqkey_keyring(). (3) No extra link will be made. Decision point (1) follows current behaviour, and allows those instantiators who've searched for a specifically named keyring in the requestor's keyring so as to partition the keys by type to still have their named keyrings. Decision point (2) allows the requestor to make sure that the key or keys that get produced by request_key() go where they want, whilst allowing the instantiator to request that the key is retained. This is mainly useful for situations where the instantiator makes a secondary request, the key for which should be retained by the initial requestor: +-----------+ +--------------+ +--------------+ | | | | | | | Requestor |------->| Instantiator |------->| Instantiator | | | | | | | +-----------+ +--------------+ +--------------+ request_key() request_key() This might be useful, for example, in Kerberos, where the requestor requests a ticket, and then the ticket instantiator requests the TGT, which someone else then has to go and fetch. The TGT, however, should be retained in the keyrings of the requestor, not the first instantiator. To make this explict an extra special keyring constant is also added. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <jmorris@namei.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 16:39:14 -07:00
key_put(dest_keyring);
[PATCH] keys: Permit running process to instantiate keys Make it possible for a running process (such as gssapid) to be able to instantiate a key, as was requested by Trond Myklebust for NFS4. The patch makes the following changes: (1) A new, optional key type method has been added. This permits a key type to intercept requests at the point /sbin/request-key is about to be spawned and do something else with them - passing them over the rpc_pipefs files or netlink sockets for instance. The uninstantiated key, the authorisation key and the intended operation name are passed to the method. (2) The callout_info is no longer passed as an argument to /sbin/request-key to prevent unauthorised viewing of this data using ps or by looking in /proc/pid/cmdline. This means that the old /sbin/request-key program will not work with the patched kernel as it will expect to see an extra argument that is no longer there. A revised keyutils package will be made available tomorrow. (3) The callout_info is now attached to the authorisation key. Reading this key will retrieve the information. (4) A new field has been added to the task_struct. This holds the authorisation key currently active for a thread. Searches now look here for the caller's set of keys rather than looking for an auth key in the lowest level of the session keyring. This permits a thread to be servicing multiple requests at once and to switch between them. Note that this is per-thread, not per-process, and so is usable in multithreaded programs. The setting of this field is inherited across fork and exec. (5) A new keyctl function (KEYCTL_ASSUME_AUTHORITY) has been added that permits a thread to assume the authority to deal with an uninstantiated key. Assumption is only permitted if the authorisation key associated with the uninstantiated key is somewhere in the thread's keyrings. This function can also clear the assumption. (6) A new magic key specifier has been added to refer to the currently assumed authorisation key (KEY_SPEC_REQKEY_AUTH_KEY). (7) Instantiation will only proceed if the appropriate authorisation key is assumed first. The assumed authorisation key is discarded if instantiation is successful. (8) key_validate() is moved from the file of request_key functions to the file of permissions functions. (9) The documentation is updated. From: <Valdis.Kletnieks@vt.edu> Build fix. Signed-off-by: David Howells <dhowells@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Alexander Zangerl <az@bond.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:02:47 -07:00
/* discard the assumed authority if it's just been disabled by
* instantiation of the key */
CRED: Inaugurate COW credentials Inaugurate copy-on-write credentials management. This uses RCU to manage the credentials pointer in the task_struct with respect to accesses by other tasks. A process may only modify its own credentials, and so does not need locking to access or modify its own credentials. A mutex (cred_replace_mutex) is added to the task_struct to control the effect of PTRACE_ATTACHED on credential calculations, particularly with respect to execve(). With this patch, the contents of an active credentials struct may not be changed directly; rather a new set of credentials must be prepared, modified and committed using something like the following sequence of events: struct cred *new = prepare_creds(); int ret = blah(new); if (ret < 0) { abort_creds(new); return ret; } return commit_creds(new); There are some exceptions to this rule: the keyrings pointed to by the active credentials may be instantiated - keyrings violate the COW rule as managing COW keyrings is tricky, given that it is possible for a task to directly alter the keys in a keyring in use by another task. To help enforce this, various pointers to sets of credentials, such as those in the task_struct, are declared const. The purpose of this is compile-time discouragement of altering credentials through those pointers. Once a set of credentials has been made public through one of these pointers, it may not be modified, except under special circumstances: (1) Its reference count may incremented and decremented. (2) The keyrings to which it points may be modified, but not replaced. The only safe way to modify anything else is to create a replacement and commit using the functions described in Documentation/credentials.txt (which will be added by a later patch). This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). This now prepares and commits credentials in various places in the security code rather than altering the current creds directly. (2) Temporary credential overrides. do_coredump() and sys_faccessat() now prepare their own credentials and temporarily override the ones currently on the acting thread, whilst preventing interference from other threads by holding cred_replace_mutex on the thread being dumped. This will be replaced in a future patch by something that hands down the credentials directly to the functions being called, rather than altering the task's objective credentials. (3) LSM interface. A number of functions have been changed, added or removed: (*) security_capset_check(), ->capset_check() (*) security_capset_set(), ->capset_set() Removed in favour of security_capset(). (*) security_capset(), ->capset() New. This is passed a pointer to the new creds, a pointer to the old creds and the proposed capability sets. It should fill in the new creds or return an error. All pointers, barring the pointer to the new creds, are now const. (*) security_bprm_apply_creds(), ->bprm_apply_creds() Changed; now returns a value, which will cause the process to be killed if it's an error. (*) security_task_alloc(), ->task_alloc_security() Removed in favour of security_prepare_creds(). (*) security_cred_free(), ->cred_free() New. Free security data attached to cred->security. (*) security_prepare_creds(), ->cred_prepare() New. Duplicate any security data attached to cred->security. (*) security_commit_creds(), ->cred_commit() New. Apply any security effects for the upcoming installation of new security by commit_creds(). (*) security_task_post_setuid(), ->task_post_setuid() Removed in favour of security_task_fix_setuid(). (*) security_task_fix_setuid(), ->task_fix_setuid() Fix up the proposed new credentials for setuid(). This is used by cap_set_fix_setuid() to implicitly adjust capabilities in line with setuid() changes. Changes are made to the new credentials, rather than the task itself as in security_task_post_setuid(). (*) security_task_reparent_to_init(), ->task_reparent_to_init() Removed. Instead the task being reparented to init is referred directly to init's credentials. NOTE! This results in the loss of some state: SELinux's osid no longer records the sid of the thread that forked it. (*) security_key_alloc(), ->key_alloc() (*) security_key_permission(), ->key_permission() Changed. These now take cred pointers rather than task pointers to refer to the security context. (4) sys_capset(). This has been simplified and uses less locking. The LSM functions it calls have been merged. (5) reparent_to_kthreadd(). This gives the current thread the same credentials as init by simply using commit_thread() to point that way. (6) __sigqueue_alloc() and switch_uid() __sigqueue_alloc() can't stop the target task from changing its creds beneath it, so this function gets a reference to the currently applicable user_struct which it then passes into the sigqueue struct it returns if successful. switch_uid() is now called from commit_creds(), and possibly should be folded into that. commit_creds() should take care of protecting __sigqueue_alloc(). (7) [sg]et[ug]id() and co and [sg]et_current_groups. The set functions now all use prepare_creds(), commit_creds() and abort_creds() to build and check a new set of credentials before applying it. security_task_set[ug]id() is called inside the prepared section. This guarantees that nothing else will affect the creds until we've finished. The calling of set_dumpable() has been moved into commit_creds(). Much of the functionality of set_user() has been moved into commit_creds(). The get functions all simply access the data directly. (8) security_task_prctl() and cap_task_prctl(). security_task_prctl() has been modified to return -ENOSYS if it doesn't want to handle a function, or otherwise return the return value directly rather than through an argument. Additionally, cap_task_prctl() now prepares a new set of credentials, even if it doesn't end up using it. (9) Keyrings. A number of changes have been made to the keyrings code: (a) switch_uid_keyring(), copy_keys(), exit_keys() and suid_keys() have all been dropped and built in to the credentials functions directly. They may want separating out again later. (b) key_alloc() and search_process_keyrings() now take a cred pointer rather than a task pointer to specify the security context. (c) copy_creds() gives a new thread within the same thread group a new thread keyring if its parent had one, otherwise it discards the thread keyring. (d) The authorisation key now points directly to the credentials to extend the search into rather pointing to the task that carries them. (e) Installing thread, process or session keyrings causes a new set of credentials to be created, even though it's not strictly necessary for process or session keyrings (they're shared). (10) Usermode helper. The usermode helper code now carries a cred struct pointer in its subprocess_info struct instead of a new session keyring pointer. This set of credentials is derived from init_cred and installed on the new process after it has been cloned. call_usermodehelper_setup() allocates the new credentials and call_usermodehelper_freeinfo() discards them if they haven't been used. A special cred function (prepare_usermodeinfo_creds()) is provided specifically for call_usermodehelper_setup() to call. call_usermodehelper_setkeys() adjusts the credentials to sport the supplied keyring as the new session keyring. (11) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) selinux_setprocattr() no longer does its check for whether the current ptracer can access processes with the new SID inside the lock that covers getting the ptracer's SID. Whilst this lock ensures that the check is done with the ptracer pinned, the result is only valid until the lock is released, so there's no point doing it inside the lock. (12) is_single_threaded(). This function has been extracted from selinux_setprocattr() and put into a file of its own in the lib/ directory as join_session_keyring() now wants to use it too. The code in SELinux just checked to see whether a task shared mm_structs with other tasks (CLONE_VM), but that isn't good enough. We really want to know if they're part of the same thread group (CLONE_THREAD). (13) nfsd. The NFS server daemon now has to use the COW credentials to set the credentials it is going to use. It really needs to pass the credentials down to the functions it calls, but it can't do that until other patches in this series have been applied. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 16:39:23 -07:00
if (ret == 0)
keyctl_change_reqkey_auth(NULL);
[PATCH] keys: Permit running process to instantiate keys Make it possible for a running process (such as gssapid) to be able to instantiate a key, as was requested by Trond Myklebust for NFS4. The patch makes the following changes: (1) A new, optional key type method has been added. This permits a key type to intercept requests at the point /sbin/request-key is about to be spawned and do something else with them - passing them over the rpc_pipefs files or netlink sockets for instance. The uninstantiated key, the authorisation key and the intended operation name are passed to the method. (2) The callout_info is no longer passed as an argument to /sbin/request-key to prevent unauthorised viewing of this data using ps or by looking in /proc/pid/cmdline. This means that the old /sbin/request-key program will not work with the patched kernel as it will expect to see an extra argument that is no longer there. A revised keyutils package will be made available tomorrow. (3) The callout_info is now attached to the authorisation key. Reading this key will retrieve the information. (4) A new field has been added to the task_struct. This holds the authorisation key currently active for a thread. Searches now look here for the caller's set of keys rather than looking for an auth key in the lowest level of the session keyring. This permits a thread to be servicing multiple requests at once and to switch between them. Note that this is per-thread, not per-process, and so is usable in multithreaded programs. The setting of this field is inherited across fork and exec. (5) A new keyctl function (KEYCTL_ASSUME_AUTHORITY) has been added that permits a thread to assume the authority to deal with an uninstantiated key. Assumption is only permitted if the authorisation key associated with the uninstantiated key is somewhere in the thread's keyrings. This function can also clear the assumption. (6) A new magic key specifier has been added to refer to the currently assumed authorisation key (KEY_SPEC_REQKEY_AUTH_KEY). (7) Instantiation will only proceed if the appropriate authorisation key is assumed first. The assumed authorisation key is discarded if instantiation is successful. (8) key_validate() is moved from the file of request_key functions to the file of permissions functions. (9) The documentation is updated. From: <Valdis.Kletnieks@vt.edu> Build fix. Signed-off-by: David Howells <dhowells@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Alexander Zangerl <az@bond.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:02:47 -07:00
error:
return ret;
}
[PATCH] Keys: Make request-key create an authorisation key The attached patch makes the following changes: (1) There's a new special key type called ".request_key_auth". This is an authorisation key for when one process requests a key and another process is started to construct it. This type of key cannot be created by the user; nor can it be requested by kernel services. Authorisation keys hold two references: (a) Each refers to a key being constructed. When the key being constructed is instantiated the authorisation key is revoked, rendering it of no further use. (b) The "authorising process". This is either: (i) the process that called request_key(), or: (ii) if the process that called request_key() itself had an authorisation key in its session keyring, then the authorising process referred to by that authorisation key will also be referred to by the new authorisation key. This means that the process that initiated a chain of key requests will authorise the lot of them, and will, by default, wind up with the keys obtained from them in its keyrings. (2) request_key() creates an authorisation key which is then passed to /sbin/request-key in as part of a new session keyring. (3) When request_key() is searching for a key to hand back to the caller, if it comes across an authorisation key in the session keyring of the calling process, it will also search the keyrings of the process specified therein and it will use the specified process's credentials (fsuid, fsgid, groups) to do that rather than the calling process's credentials. This allows a process started by /sbin/request-key to find keys belonging to the authorising process. (4) A key can be read, even if the process executing KEYCTL_READ doesn't have direct read or search permission if that key is contained within the keyrings of a process specified by an authorisation key found within the calling process's session keyring, and is searchable using the credentials of the authorising process. This allows a process started by /sbin/request-key to read keys belonging to the authorising process. (5) The magic KEY_SPEC_*_KEYRING key IDs when passed to KEYCTL_INSTANTIATE or KEYCTL_NEGATE will specify a keyring of the authorising process, rather than the process doing the instantiation. (6) One of the process keyrings can be nominated as the default to which request_key() should attach new keys if not otherwise specified. This is done with KEYCTL_SET_REQKEY_KEYRING and one of the KEY_REQKEY_DEFL_* constants. The current setting can also be read using this call. (7) request_key() is partially interruptible. If it is waiting for another process to finish constructing a key, it can be interrupted. This permits a request-key cycle to be broken without recourse to rebooting. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-Off-By: Benoit Boissinot <benoit.boissinot@ens-lyon.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 23:00:56 -06:00
/*
* Read or set the default keyring in which request_key() will cache keys and
* return the old setting.
*
* If a thread or process keyring is specified then it will be created if it
* doesn't yet exist. The old setting will be returned if successful.
[PATCH] Keys: Make request-key create an authorisation key The attached patch makes the following changes: (1) There's a new special key type called ".request_key_auth". This is an authorisation key for when one process requests a key and another process is started to construct it. This type of key cannot be created by the user; nor can it be requested by kernel services. Authorisation keys hold two references: (a) Each refers to a key being constructed. When the key being constructed is instantiated the authorisation key is revoked, rendering it of no further use. (b) The "authorising process". This is either: (i) the process that called request_key(), or: (ii) if the process that called request_key() itself had an authorisation key in its session keyring, then the authorising process referred to by that authorisation key will also be referred to by the new authorisation key. This means that the process that initiated a chain of key requests will authorise the lot of them, and will, by default, wind up with the keys obtained from them in its keyrings. (2) request_key() creates an authorisation key which is then passed to /sbin/request-key in as part of a new session keyring. (3) When request_key() is searching for a key to hand back to the caller, if it comes across an authorisation key in the session keyring of the calling process, it will also search the keyrings of the process specified therein and it will use the specified process's credentials (fsuid, fsgid, groups) to do that rather than the calling process's credentials. This allows a process started by /sbin/request-key to find keys belonging to the authorising process. (4) A key can be read, even if the process executing KEYCTL_READ doesn't have direct read or search permission if that key is contained within the keyrings of a process specified by an authorisation key found within the calling process's session keyring, and is searchable using the credentials of the authorising process. This allows a process started by /sbin/request-key to read keys belonging to the authorising process. (5) The magic KEY_SPEC_*_KEYRING key IDs when passed to KEYCTL_INSTANTIATE or KEYCTL_NEGATE will specify a keyring of the authorising process, rather than the process doing the instantiation. (6) One of the process keyrings can be nominated as the default to which request_key() should attach new keys if not otherwise specified. This is done with KEYCTL_SET_REQKEY_KEYRING and one of the KEY_REQKEY_DEFL_* constants. The current setting can also be read using this call. (7) request_key() is partially interruptible. If it is waiting for another process to finish constructing a key, it can be interrupted. This permits a request-key cycle to be broken without recourse to rebooting. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-Off-By: Benoit Boissinot <benoit.boissinot@ens-lyon.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 23:00:56 -06:00
*/
long keyctl_set_reqkey_keyring(int reqkey_defl)
{
CRED: Inaugurate COW credentials Inaugurate copy-on-write credentials management. This uses RCU to manage the credentials pointer in the task_struct with respect to accesses by other tasks. A process may only modify its own credentials, and so does not need locking to access or modify its own credentials. A mutex (cred_replace_mutex) is added to the task_struct to control the effect of PTRACE_ATTACHED on credential calculations, particularly with respect to execve(). With this patch, the contents of an active credentials struct may not be changed directly; rather a new set of credentials must be prepared, modified and committed using something like the following sequence of events: struct cred *new = prepare_creds(); int ret = blah(new); if (ret < 0) { abort_creds(new); return ret; } return commit_creds(new); There are some exceptions to this rule: the keyrings pointed to by the active credentials may be instantiated - keyrings violate the COW rule as managing COW keyrings is tricky, given that it is possible for a task to directly alter the keys in a keyring in use by another task. To help enforce this, various pointers to sets of credentials, such as those in the task_struct, are declared const. The purpose of this is compile-time discouragement of altering credentials through those pointers. Once a set of credentials has been made public through one of these pointers, it may not be modified, except under special circumstances: (1) Its reference count may incremented and decremented. (2) The keyrings to which it points may be modified, but not replaced. The only safe way to modify anything else is to create a replacement and commit using the functions described in Documentation/credentials.txt (which will be added by a later patch). This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). This now prepares and commits credentials in various places in the security code rather than altering the current creds directly. (2) Temporary credential overrides. do_coredump() and sys_faccessat() now prepare their own credentials and temporarily override the ones currently on the acting thread, whilst preventing interference from other threads by holding cred_replace_mutex on the thread being dumped. This will be replaced in a future patch by something that hands down the credentials directly to the functions being called, rather than altering the task's objective credentials. (3) LSM interface. A number of functions have been changed, added or removed: (*) security_capset_check(), ->capset_check() (*) security_capset_set(), ->capset_set() Removed in favour of security_capset(). (*) security_capset(), ->capset() New. This is passed a pointer to the new creds, a pointer to the old creds and the proposed capability sets. It should fill in the new creds or return an error. All pointers, barring the pointer to the new creds, are now const. (*) security_bprm_apply_creds(), ->bprm_apply_creds() Changed; now returns a value, which will cause the process to be killed if it's an error. (*) security_task_alloc(), ->task_alloc_security() Removed in favour of security_prepare_creds(). (*) security_cred_free(), ->cred_free() New. Free security data attached to cred->security. (*) security_prepare_creds(), ->cred_prepare() New. Duplicate any security data attached to cred->security. (*) security_commit_creds(), ->cred_commit() New. Apply any security effects for the upcoming installation of new security by commit_creds(). (*) security_task_post_setuid(), ->task_post_setuid() Removed in favour of security_task_fix_setuid(). (*) security_task_fix_setuid(), ->task_fix_setuid() Fix up the proposed new credentials for setuid(). This is used by cap_set_fix_setuid() to implicitly adjust capabilities in line with setuid() changes. Changes are made to the new credentials, rather than the task itself as in security_task_post_setuid(). (*) security_task_reparent_to_init(), ->task_reparent_to_init() Removed. Instead the task being reparented to init is referred directly to init's credentials. NOTE! This results in the loss of some state: SELinux's osid no longer records the sid of the thread that forked it. (*) security_key_alloc(), ->key_alloc() (*) security_key_permission(), ->key_permission() Changed. These now take cred pointers rather than task pointers to refer to the security context. (4) sys_capset(). This has been simplified and uses less locking. The LSM functions it calls have been merged. (5) reparent_to_kthreadd(). This gives the current thread the same credentials as init by simply using commit_thread() to point that way. (6) __sigqueue_alloc() and switch_uid() __sigqueue_alloc() can't stop the target task from changing its creds beneath it, so this function gets a reference to the currently applicable user_struct which it then passes into the sigqueue struct it returns if successful. switch_uid() is now called from commit_creds(), and possibly should be folded into that. commit_creds() should take care of protecting __sigqueue_alloc(). (7) [sg]et[ug]id() and co and [sg]et_current_groups. The set functions now all use prepare_creds(), commit_creds() and abort_creds() to build and check a new set of credentials before applying it. security_task_set[ug]id() is called inside the prepared section. This guarantees that nothing else will affect the creds until we've finished. The calling of set_dumpable() has been moved into commit_creds(). Much of the functionality of set_user() has been moved into commit_creds(). The get functions all simply access the data directly. (8) security_task_prctl() and cap_task_prctl(). security_task_prctl() has been modified to return -ENOSYS if it doesn't want to handle a function, or otherwise return the return value directly rather than through an argument. Additionally, cap_task_prctl() now prepares a new set of credentials, even if it doesn't end up using it. (9) Keyrings. A number of changes have been made to the keyrings code: (a) switch_uid_keyring(), copy_keys(), exit_keys() and suid_keys() have all been dropped and built in to the credentials functions directly. They may want separating out again later. (b) key_alloc() and search_process_keyrings() now take a cred pointer rather than a task pointer to specify the security context. (c) copy_creds() gives a new thread within the same thread group a new thread keyring if its parent had one, otherwise it discards the thread keyring. (d) The authorisation key now points directly to the credentials to extend the search into rather pointing to the task that carries them. (e) Installing thread, process or session keyrings causes a new set of credentials to be created, even though it's not strictly necessary for process or session keyrings (they're shared). (10) Usermode helper. The usermode helper code now carries a cred struct pointer in its subprocess_info struct instead of a new session keyring pointer. This set of credentials is derived from init_cred and installed on the new process after it has been cloned. call_usermodehelper_setup() allocates the new credentials and call_usermodehelper_freeinfo() discards them if they haven't been used. A special cred function (prepare_usermodeinfo_creds()) is provided specifically for call_usermodehelper_setup() to call. call_usermodehelper_setkeys() adjusts the credentials to sport the supplied keyring as the new session keyring. (11) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) selinux_setprocattr() no longer does its check for whether the current ptracer can access processes with the new SID inside the lock that covers getting the ptracer's SID. Whilst this lock ensures that the check is done with the ptracer pinned, the result is only valid until the lock is released, so there's no point doing it inside the lock. (12) is_single_threaded(). This function has been extracted from selinux_setprocattr() and put into a file of its own in the lib/ directory as join_session_keyring() now wants to use it too. The code in SELinux just checked to see whether a task shared mm_structs with other tasks (CLONE_VM), but that isn't good enough. We really want to know if they're part of the same thread group (CLONE_THREAD). (13) nfsd. The NFS server daemon now has to use the COW credentials to set the credentials it is going to use. It really needs to pass the credentials down to the functions it calls, but it can't do that until other patches in this series have been applied. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 16:39:23 -07:00
struct cred *new;
int ret, old_setting;
old_setting = current_cred_xxx(jit_keyring);
if (reqkey_defl == KEY_REQKEY_DEFL_NO_CHANGE)
return old_setting;
new = prepare_creds();
if (!new)
return -ENOMEM;
[PATCH] Keys: Make request-key create an authorisation key The attached patch makes the following changes: (1) There's a new special key type called ".request_key_auth". This is an authorisation key for when one process requests a key and another process is started to construct it. This type of key cannot be created by the user; nor can it be requested by kernel services. Authorisation keys hold two references: (a) Each refers to a key being constructed. When the key being constructed is instantiated the authorisation key is revoked, rendering it of no further use. (b) The "authorising process". This is either: (i) the process that called request_key(), or: (ii) if the process that called request_key() itself had an authorisation key in its session keyring, then the authorising process referred to by that authorisation key will also be referred to by the new authorisation key. This means that the process that initiated a chain of key requests will authorise the lot of them, and will, by default, wind up with the keys obtained from them in its keyrings. (2) request_key() creates an authorisation key which is then passed to /sbin/request-key in as part of a new session keyring. (3) When request_key() is searching for a key to hand back to the caller, if it comes across an authorisation key in the session keyring of the calling process, it will also search the keyrings of the process specified therein and it will use the specified process's credentials (fsuid, fsgid, groups) to do that rather than the calling process's credentials. This allows a process started by /sbin/request-key to find keys belonging to the authorising process. (4) A key can be read, even if the process executing KEYCTL_READ doesn't have direct read or search permission if that key is contained within the keyrings of a process specified by an authorisation key found within the calling process's session keyring, and is searchable using the credentials of the authorising process. This allows a process started by /sbin/request-key to read keys belonging to the authorising process. (5) The magic KEY_SPEC_*_KEYRING key IDs when passed to KEYCTL_INSTANTIATE or KEYCTL_NEGATE will specify a keyring of the authorising process, rather than the process doing the instantiation. (6) One of the process keyrings can be nominated as the default to which request_key() should attach new keys if not otherwise specified. This is done with KEYCTL_SET_REQKEY_KEYRING and one of the KEY_REQKEY_DEFL_* constants. The current setting can also be read using this call. (7) request_key() is partially interruptible. If it is waiting for another process to finish constructing a key, it can be interrupted. This permits a request-key cycle to be broken without recourse to rebooting. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-Off-By: Benoit Boissinot <benoit.boissinot@ens-lyon.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 23:00:56 -06:00
switch (reqkey_defl) {
case KEY_REQKEY_DEFL_THREAD_KEYRING:
CRED: Inaugurate COW credentials Inaugurate copy-on-write credentials management. This uses RCU to manage the credentials pointer in the task_struct with respect to accesses by other tasks. A process may only modify its own credentials, and so does not need locking to access or modify its own credentials. A mutex (cred_replace_mutex) is added to the task_struct to control the effect of PTRACE_ATTACHED on credential calculations, particularly with respect to execve(). With this patch, the contents of an active credentials struct may not be changed directly; rather a new set of credentials must be prepared, modified and committed using something like the following sequence of events: struct cred *new = prepare_creds(); int ret = blah(new); if (ret < 0) { abort_creds(new); return ret; } return commit_creds(new); There are some exceptions to this rule: the keyrings pointed to by the active credentials may be instantiated - keyrings violate the COW rule as managing COW keyrings is tricky, given that it is possible for a task to directly alter the keys in a keyring in use by another task. To help enforce this, various pointers to sets of credentials, such as those in the task_struct, are declared const. The purpose of this is compile-time discouragement of altering credentials through those pointers. Once a set of credentials has been made public through one of these pointers, it may not be modified, except under special circumstances: (1) Its reference count may incremented and decremented. (2) The keyrings to which it points may be modified, but not replaced. The only safe way to modify anything else is to create a replacement and commit using the functions described in Documentation/credentials.txt (which will be added by a later patch). This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). This now prepares and commits credentials in various places in the security code rather than altering the current creds directly. (2) Temporary credential overrides. do_coredump() and sys_faccessat() now prepare their own credentials and temporarily override the ones currently on the acting thread, whilst preventing interference from other threads by holding cred_replace_mutex on the thread being dumped. This will be replaced in a future patch by something that hands down the credentials directly to the functions being called, rather than altering the task's objective credentials. (3) LSM interface. A number of functions have been changed, added or removed: (*) security_capset_check(), ->capset_check() (*) security_capset_set(), ->capset_set() Removed in favour of security_capset(). (*) security_capset(), ->capset() New. This is passed a pointer to the new creds, a pointer to the old creds and the proposed capability sets. It should fill in the new creds or return an error. All pointers, barring the pointer to the new creds, are now const. (*) security_bprm_apply_creds(), ->bprm_apply_creds() Changed; now returns a value, which will cause the process to be killed if it's an error. (*) security_task_alloc(), ->task_alloc_security() Removed in favour of security_prepare_creds(). (*) security_cred_free(), ->cred_free() New. Free security data attached to cred->security. (*) security_prepare_creds(), ->cred_prepare() New. Duplicate any security data attached to cred->security. (*) security_commit_creds(), ->cred_commit() New. Apply any security effects for the upcoming installation of new security by commit_creds(). (*) security_task_post_setuid(), ->task_post_setuid() Removed in favour of security_task_fix_setuid(). (*) security_task_fix_setuid(), ->task_fix_setuid() Fix up the proposed new credentials for setuid(). This is used by cap_set_fix_setuid() to implicitly adjust capabilities in line with setuid() changes. Changes are made to the new credentials, rather than the task itself as in security_task_post_setuid(). (*) security_task_reparent_to_init(), ->task_reparent_to_init() Removed. Instead the task being reparented to init is referred directly to init's credentials. NOTE! This results in the loss of some state: SELinux's osid no longer records the sid of the thread that forked it. (*) security_key_alloc(), ->key_alloc() (*) security_key_permission(), ->key_permission() Changed. These now take cred pointers rather than task pointers to refer to the security context. (4) sys_capset(). This has been simplified and uses less locking. The LSM functions it calls have been merged. (5) reparent_to_kthreadd(). This gives the current thread the same credentials as init by simply using commit_thread() to point that way. (6) __sigqueue_alloc() and switch_uid() __sigqueue_alloc() can't stop the target task from changing its creds beneath it, so this function gets a reference to the currently applicable user_struct which it then passes into the sigqueue struct it returns if successful. switch_uid() is now called from commit_creds(), and possibly should be folded into that. commit_creds() should take care of protecting __sigqueue_alloc(). (7) [sg]et[ug]id() and co and [sg]et_current_groups. The set functions now all use prepare_creds(), commit_creds() and abort_creds() to build and check a new set of credentials before applying it. security_task_set[ug]id() is called inside the prepared section. This guarantees that nothing else will affect the creds until we've finished. The calling of set_dumpable() has been moved into commit_creds(). Much of the functionality of set_user() has been moved into commit_creds(). The get functions all simply access the data directly. (8) security_task_prctl() and cap_task_prctl(). security_task_prctl() has been modified to return -ENOSYS if it doesn't want to handle a function, or otherwise return the return value directly rather than through an argument. Additionally, cap_task_prctl() now prepares a new set of credentials, even if it doesn't end up using it. (9) Keyrings. A number of changes have been made to the keyrings code: (a) switch_uid_keyring(), copy_keys(), exit_keys() and suid_keys() have all been dropped and built in to the credentials functions directly. They may want separating out again later. (b) key_alloc() and search_process_keyrings() now take a cred pointer rather than a task pointer to specify the security context. (c) copy_creds() gives a new thread within the same thread group a new thread keyring if its parent had one, otherwise it discards the thread keyring. (d) The authorisation key now points directly to the credentials to extend the search into rather pointing to the task that carries them. (e) Installing thread, process or session keyrings causes a new set of credentials to be created, even though it's not strictly necessary for process or session keyrings (they're shared). (10) Usermode helper. The usermode helper code now carries a cred struct pointer in its subprocess_info struct instead of a new session keyring pointer. This set of credentials is derived from init_cred and installed on the new process after it has been cloned. call_usermodehelper_setup() allocates the new credentials and call_usermodehelper_freeinfo() discards them if they haven't been used. A special cred function (prepare_usermodeinfo_creds()) is provided specifically for call_usermodehelper_setup() to call. call_usermodehelper_setkeys() adjusts the credentials to sport the supplied keyring as the new session keyring. (11) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) selinux_setprocattr() no longer does its check for whether the current ptracer can access processes with the new SID inside the lock that covers getting the ptracer's SID. Whilst this lock ensures that the check is done with the ptracer pinned, the result is only valid until the lock is released, so there's no point doing it inside the lock. (12) is_single_threaded(). This function has been extracted from selinux_setprocattr() and put into a file of its own in the lib/ directory as join_session_keyring() now wants to use it too. The code in SELinux just checked to see whether a task shared mm_structs with other tasks (CLONE_VM), but that isn't good enough. We really want to know if they're part of the same thread group (CLONE_THREAD). (13) nfsd. The NFS server daemon now has to use the COW credentials to set the credentials it is going to use. It really needs to pass the credentials down to the functions it calls, but it can't do that until other patches in this series have been applied. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 16:39:23 -07:00
ret = install_thread_keyring_to_cred(new);
[PATCH] Keys: Make request-key create an authorisation key The attached patch makes the following changes: (1) There's a new special key type called ".request_key_auth". This is an authorisation key for when one process requests a key and another process is started to construct it. This type of key cannot be created by the user; nor can it be requested by kernel services. Authorisation keys hold two references: (a) Each refers to a key being constructed. When the key being constructed is instantiated the authorisation key is revoked, rendering it of no further use. (b) The "authorising process". This is either: (i) the process that called request_key(), or: (ii) if the process that called request_key() itself had an authorisation key in its session keyring, then the authorising process referred to by that authorisation key will also be referred to by the new authorisation key. This means that the process that initiated a chain of key requests will authorise the lot of them, and will, by default, wind up with the keys obtained from them in its keyrings. (2) request_key() creates an authorisation key which is then passed to /sbin/request-key in as part of a new session keyring. (3) When request_key() is searching for a key to hand back to the caller, if it comes across an authorisation key in the session keyring of the calling process, it will also search the keyrings of the process specified therein and it will use the specified process's credentials (fsuid, fsgid, groups) to do that rather than the calling process's credentials. This allows a process started by /sbin/request-key to find keys belonging to the authorising process. (4) A key can be read, even if the process executing KEYCTL_READ doesn't have direct read or search permission if that key is contained within the keyrings of a process specified by an authorisation key found within the calling process's session keyring, and is searchable using the credentials of the authorising process. This allows a process started by /sbin/request-key to read keys belonging to the authorising process. (5) The magic KEY_SPEC_*_KEYRING key IDs when passed to KEYCTL_INSTANTIATE or KEYCTL_NEGATE will specify a keyring of the authorising process, rather than the process doing the instantiation. (6) One of the process keyrings can be nominated as the default to which request_key() should attach new keys if not otherwise specified. This is done with KEYCTL_SET_REQKEY_KEYRING and one of the KEY_REQKEY_DEFL_* constants. The current setting can also be read using this call. (7) request_key() is partially interruptible. If it is waiting for another process to finish constructing a key, it can be interrupted. This permits a request-key cycle to be broken without recourse to rebooting. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-Off-By: Benoit Boissinot <benoit.boissinot@ens-lyon.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 23:00:56 -06:00
if (ret < 0)
CRED: Inaugurate COW credentials Inaugurate copy-on-write credentials management. This uses RCU to manage the credentials pointer in the task_struct with respect to accesses by other tasks. A process may only modify its own credentials, and so does not need locking to access or modify its own credentials. A mutex (cred_replace_mutex) is added to the task_struct to control the effect of PTRACE_ATTACHED on credential calculations, particularly with respect to execve(). With this patch, the contents of an active credentials struct may not be changed directly; rather a new set of credentials must be prepared, modified and committed using something like the following sequence of events: struct cred *new = prepare_creds(); int ret = blah(new); if (ret < 0) { abort_creds(new); return ret; } return commit_creds(new); There are some exceptions to this rule: the keyrings pointed to by the active credentials may be instantiated - keyrings violate the COW rule as managing COW keyrings is tricky, given that it is possible for a task to directly alter the keys in a keyring in use by another task. To help enforce this, various pointers to sets of credentials, such as those in the task_struct, are declared const. The purpose of this is compile-time discouragement of altering credentials through those pointers. Once a set of credentials has been made public through one of these pointers, it may not be modified, except under special circumstances: (1) Its reference count may incremented and decremented. (2) The keyrings to which it points may be modified, but not replaced. The only safe way to modify anything else is to create a replacement and commit using the functions described in Documentation/credentials.txt (which will be added by a later patch). This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). This now prepares and commits credentials in various places in the security code rather than altering the current creds directly. (2) Temporary credential overrides. do_coredump() and sys_faccessat() now prepare their own credentials and temporarily override the ones currently on the acting thread, whilst preventing interference from other threads by holding cred_replace_mutex on the thread being dumped. This will be replaced in a future patch by something that hands down the credentials directly to the functions being called, rather than altering the task's objective credentials. (3) LSM interface. A number of functions have been changed, added or removed: (*) security_capset_check(), ->capset_check() (*) security_capset_set(), ->capset_set() Removed in favour of security_capset(). (*) security_capset(), ->capset() New. This is passed a pointer to the new creds, a pointer to the old creds and the proposed capability sets. It should fill in the new creds or return an error. All pointers, barring the pointer to the new creds, are now const. (*) security_bprm_apply_creds(), ->bprm_apply_creds() Changed; now returns a value, which will cause the process to be killed if it's an error. (*) security_task_alloc(), ->task_alloc_security() Removed in favour of security_prepare_creds(). (*) security_cred_free(), ->cred_free() New. Free security data attached to cred->security. (*) security_prepare_creds(), ->cred_prepare() New. Duplicate any security data attached to cred->security. (*) security_commit_creds(), ->cred_commit() New. Apply any security effects for the upcoming installation of new security by commit_creds(). (*) security_task_post_setuid(), ->task_post_setuid() Removed in favour of security_task_fix_setuid(). (*) security_task_fix_setuid(), ->task_fix_setuid() Fix up the proposed new credentials for setuid(). This is used by cap_set_fix_setuid() to implicitly adjust capabilities in line with setuid() changes. Changes are made to the new credentials, rather than the task itself as in security_task_post_setuid(). (*) security_task_reparent_to_init(), ->task_reparent_to_init() Removed. Instead the task being reparented to init is referred directly to init's credentials. NOTE! This results in the loss of some state: SELinux's osid no longer records the sid of the thread that forked it. (*) security_key_alloc(), ->key_alloc() (*) security_key_permission(), ->key_permission() Changed. These now take cred pointers rather than task pointers to refer to the security context. (4) sys_capset(). This has been simplified and uses less locking. The LSM functions it calls have been merged. (5) reparent_to_kthreadd(). This gives the current thread the same credentials as init by simply using commit_thread() to point that way. (6) __sigqueue_alloc() and switch_uid() __sigqueue_alloc() can't stop the target task from changing its creds beneath it, so this function gets a reference to the currently applicable user_struct which it then passes into the sigqueue struct it returns if successful. switch_uid() is now called from commit_creds(), and possibly should be folded into that. commit_creds() should take care of protecting __sigqueue_alloc(). (7) [sg]et[ug]id() and co and [sg]et_current_groups. The set functions now all use prepare_creds(), commit_creds() and abort_creds() to build and check a new set of credentials before applying it. security_task_set[ug]id() is called inside the prepared section. This guarantees that nothing else will affect the creds until we've finished. The calling of set_dumpable() has been moved into commit_creds(). Much of the functionality of set_user() has been moved into commit_creds(). The get functions all simply access the data directly. (8) security_task_prctl() and cap_task_prctl(). security_task_prctl() has been modified to return -ENOSYS if it doesn't want to handle a function, or otherwise return the return value directly rather than through an argument. Additionally, cap_task_prctl() now prepares a new set of credentials, even if it doesn't end up using it. (9) Keyrings. A number of changes have been made to the keyrings code: (a) switch_uid_keyring(), copy_keys(), exit_keys() and suid_keys() have all been dropped and built in to the credentials functions directly. They may want separating out again later. (b) key_alloc() and search_process_keyrings() now take a cred pointer rather than a task pointer to specify the security context. (c) copy_creds() gives a new thread within the same thread group a new thread keyring if its parent had one, otherwise it discards the thread keyring. (d) The authorisation key now points directly to the credentials to extend the search into rather pointing to the task that carries them. (e) Installing thread, process or session keyrings causes a new set of credentials to be created, even though it's not strictly necessary for process or session keyrings (they're shared). (10) Usermode helper. The usermode helper code now carries a cred struct pointer in its subprocess_info struct instead of a new session keyring pointer. This set of credentials is derived from init_cred and installed on the new process after it has been cloned. call_usermodehelper_setup() allocates the new credentials and call_usermodehelper_freeinfo() discards them if they haven't been used. A special cred function (prepare_usermodeinfo_creds()) is provided specifically for call_usermodehelper_setup() to call. call_usermodehelper_setkeys() adjusts the credentials to sport the supplied keyring as the new session keyring. (11) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) selinux_setprocattr() no longer does its check for whether the current ptracer can access processes with the new SID inside the lock that covers getting the ptracer's SID. Whilst this lock ensures that the check is done with the ptracer pinned, the result is only valid until the lock is released, so there's no point doing it inside the lock. (12) is_single_threaded(). This function has been extracted from selinux_setprocattr() and put into a file of its own in the lib/ directory as join_session_keyring() now wants to use it too. The code in SELinux just checked to see whether a task shared mm_structs with other tasks (CLONE_VM), but that isn't good enough. We really want to know if they're part of the same thread group (CLONE_THREAD). (13) nfsd. The NFS server daemon now has to use the COW credentials to set the credentials it is going to use. It really needs to pass the credentials down to the functions it calls, but it can't do that until other patches in this series have been applied. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 16:39:23 -07:00
goto error;
[PATCH] Keys: Make request-key create an authorisation key The attached patch makes the following changes: (1) There's a new special key type called ".request_key_auth". This is an authorisation key for when one process requests a key and another process is started to construct it. This type of key cannot be created by the user; nor can it be requested by kernel services. Authorisation keys hold two references: (a) Each refers to a key being constructed. When the key being constructed is instantiated the authorisation key is revoked, rendering it of no further use. (b) The "authorising process". This is either: (i) the process that called request_key(), or: (ii) if the process that called request_key() itself had an authorisation key in its session keyring, then the authorising process referred to by that authorisation key will also be referred to by the new authorisation key. This means that the process that initiated a chain of key requests will authorise the lot of them, and will, by default, wind up with the keys obtained from them in its keyrings. (2) request_key() creates an authorisation key which is then passed to /sbin/request-key in as part of a new session keyring. (3) When request_key() is searching for a key to hand back to the caller, if it comes across an authorisation key in the session keyring of the calling process, it will also search the keyrings of the process specified therein and it will use the specified process's credentials (fsuid, fsgid, groups) to do that rather than the calling process's credentials. This allows a process started by /sbin/request-key to find keys belonging to the authorising process. (4) A key can be read, even if the process executing KEYCTL_READ doesn't have direct read or search permission if that key is contained within the keyrings of a process specified by an authorisation key found within the calling process's session keyring, and is searchable using the credentials of the authorising process. This allows a process started by /sbin/request-key to read keys belonging to the authorising process. (5) The magic KEY_SPEC_*_KEYRING key IDs when passed to KEYCTL_INSTANTIATE or KEYCTL_NEGATE will specify a keyring of the authorising process, rather than the process doing the instantiation. (6) One of the process keyrings can be nominated as the default to which request_key() should attach new keys if not otherwise specified. This is done with KEYCTL_SET_REQKEY_KEYRING and one of the KEY_REQKEY_DEFL_* constants. The current setting can also be read using this call. (7) request_key() is partially interruptible. If it is waiting for another process to finish constructing a key, it can be interrupted. This permits a request-key cycle to be broken without recourse to rebooting. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-Off-By: Benoit Boissinot <benoit.boissinot@ens-lyon.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 23:00:56 -06:00
goto set;
case KEY_REQKEY_DEFL_PROCESS_KEYRING:
CRED: Inaugurate COW credentials Inaugurate copy-on-write credentials management. This uses RCU to manage the credentials pointer in the task_struct with respect to accesses by other tasks. A process may only modify its own credentials, and so does not need locking to access or modify its own credentials. A mutex (cred_replace_mutex) is added to the task_struct to control the effect of PTRACE_ATTACHED on credential calculations, particularly with respect to execve(). With this patch, the contents of an active credentials struct may not be changed directly; rather a new set of credentials must be prepared, modified and committed using something like the following sequence of events: struct cred *new = prepare_creds(); int ret = blah(new); if (ret < 0) { abort_creds(new); return ret; } return commit_creds(new); There are some exceptions to this rule: the keyrings pointed to by the active credentials may be instantiated - keyrings violate the COW rule as managing COW keyrings is tricky, given that it is possible for a task to directly alter the keys in a keyring in use by another task. To help enforce this, various pointers to sets of credentials, such as those in the task_struct, are declared const. The purpose of this is compile-time discouragement of altering credentials through those pointers. Once a set of credentials has been made public through one of these pointers, it may not be modified, except under special circumstances: (1) Its reference count may incremented and decremented. (2) The keyrings to which it points may be modified, but not replaced. The only safe way to modify anything else is to create a replacement and commit using the functions described in Documentation/credentials.txt (which will be added by a later patch). This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). This now prepares and commits credentials in various places in the security code rather than altering the current creds directly. (2) Temporary credential overrides. do_coredump() and sys_faccessat() now prepare their own credentials and temporarily override the ones currently on the acting thread, whilst preventing interference from other threads by holding cred_replace_mutex on the thread being dumped. This will be replaced in a future patch by something that hands down the credentials directly to the functions being called, rather than altering the task's objective credentials. (3) LSM interface. A number of functions have been changed, added or removed: (*) security_capset_check(), ->capset_check() (*) security_capset_set(), ->capset_set() Removed in favour of security_capset(). (*) security_capset(), ->capset() New. This is passed a pointer to the new creds, a pointer to the old creds and the proposed capability sets. It should fill in the new creds or return an error. All pointers, barring the pointer to the new creds, are now const. (*) security_bprm_apply_creds(), ->bprm_apply_creds() Changed; now returns a value, which will cause the process to be killed if it's an error. (*) security_task_alloc(), ->task_alloc_security() Removed in favour of security_prepare_creds(). (*) security_cred_free(), ->cred_free() New. Free security data attached to cred->security. (*) security_prepare_creds(), ->cred_prepare() New. Duplicate any security data attached to cred->security. (*) security_commit_creds(), ->cred_commit() New. Apply any security effects for the upcoming installation of new security by commit_creds(). (*) security_task_post_setuid(), ->task_post_setuid() Removed in favour of security_task_fix_setuid(). (*) security_task_fix_setuid(), ->task_fix_setuid() Fix up the proposed new credentials for setuid(). This is used by cap_set_fix_setuid() to implicitly adjust capabilities in line with setuid() changes. Changes are made to the new credentials, rather than the task itself as in security_task_post_setuid(). (*) security_task_reparent_to_init(), ->task_reparent_to_init() Removed. Instead the task being reparented to init is referred directly to init's credentials. NOTE! This results in the loss of some state: SELinux's osid no longer records the sid of the thread that forked it. (*) security_key_alloc(), ->key_alloc() (*) security_key_permission(), ->key_permission() Changed. These now take cred pointers rather than task pointers to refer to the security context. (4) sys_capset(). This has been simplified and uses less locking. The LSM functions it calls have been merged. (5) reparent_to_kthreadd(). This gives the current thread the same credentials as init by simply using commit_thread() to point that way. (6) __sigqueue_alloc() and switch_uid() __sigqueue_alloc() can't stop the target task from changing its creds beneath it, so this function gets a reference to the currently applicable user_struct which it then passes into the sigqueue struct it returns if successful. switch_uid() is now called from commit_creds(), and possibly should be folded into that. commit_creds() should take care of protecting __sigqueue_alloc(). (7) [sg]et[ug]id() and co and [sg]et_current_groups. The set functions now all use prepare_creds(), commit_creds() and abort_creds() to build and check a new set of credentials before applying it. security_task_set[ug]id() is called inside the prepared section. This guarantees that nothing else will affect the creds until we've finished. The calling of set_dumpable() has been moved into commit_creds(). Much of the functionality of set_user() has been moved into commit_creds(). The get functions all simply access the data directly. (8) security_task_prctl() and cap_task_prctl(). security_task_prctl() has been modified to return -ENOSYS if it doesn't want to handle a function, or otherwise return the return value directly rather than through an argument. Additionally, cap_task_prctl() now prepares a new set of credentials, even if it doesn't end up using it. (9) Keyrings. A number of changes have been made to the keyrings code: (a) switch_uid_keyring(), copy_keys(), exit_keys() and suid_keys() have all been dropped and built in to the credentials functions directly. They may want separating out again later. (b) key_alloc() and search_process_keyrings() now take a cred pointer rather than a task pointer to specify the security context. (c) copy_creds() gives a new thread within the same thread group a new thread keyring if its parent had one, otherwise it discards the thread keyring. (d) The authorisation key now points directly to the credentials to extend the search into rather pointing to the task that carries them. (e) Installing thread, process or session keyrings causes a new set of credentials to be created, even though it's not strictly necessary for process or session keyrings (they're shared). (10) Usermode helper. The usermode helper code now carries a cred struct pointer in its subprocess_info struct instead of a new session keyring pointer. This set of credentials is derived from init_cred and installed on the new process after it has been cloned. call_usermodehelper_setup() allocates the new credentials and call_usermodehelper_freeinfo() discards them if they haven't been used. A special cred function (prepare_usermodeinfo_creds()) is provided specifically for call_usermodehelper_setup() to call. call_usermodehelper_setkeys() adjusts the credentials to sport the supplied keyring as the new session keyring. (11) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) selinux_setprocattr() no longer does its check for whether the current ptracer can access processes with the new SID inside the lock that covers getting the ptracer's SID. Whilst this lock ensures that the check is done with the ptracer pinned, the result is only valid until the lock is released, so there's no point doing it inside the lock. (12) is_single_threaded(). This function has been extracted from selinux_setprocattr() and put into a file of its own in the lib/ directory as join_session_keyring() now wants to use it too. The code in SELinux just checked to see whether a task shared mm_structs with other tasks (CLONE_VM), but that isn't good enough. We really want to know if they're part of the same thread group (CLONE_THREAD). (13) nfsd. The NFS server daemon now has to use the COW credentials to set the credentials it is going to use. It really needs to pass the credentials down to the functions it calls, but it can't do that until other patches in this series have been applied. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 16:39:23 -07:00
ret = install_process_keyring_to_cred(new);
if (ret < 0)
goto error;
CRED: Inaugurate COW credentials Inaugurate copy-on-write credentials management. This uses RCU to manage the credentials pointer in the task_struct with respect to accesses by other tasks. A process may only modify its own credentials, and so does not need locking to access or modify its own credentials. A mutex (cred_replace_mutex) is added to the task_struct to control the effect of PTRACE_ATTACHED on credential calculations, particularly with respect to execve(). With this patch, the contents of an active credentials struct may not be changed directly; rather a new set of credentials must be prepared, modified and committed using something like the following sequence of events: struct cred *new = prepare_creds(); int ret = blah(new); if (ret < 0) { abort_creds(new); return ret; } return commit_creds(new); There are some exceptions to this rule: the keyrings pointed to by the active credentials may be instantiated - keyrings violate the COW rule as managing COW keyrings is tricky, given that it is possible for a task to directly alter the keys in a keyring in use by another task. To help enforce this, various pointers to sets of credentials, such as those in the task_struct, are declared const. The purpose of this is compile-time discouragement of altering credentials through those pointers. Once a set of credentials has been made public through one of these pointers, it may not be modified, except under special circumstances: (1) Its reference count may incremented and decremented. (2) The keyrings to which it points may be modified, but not replaced. The only safe way to modify anything else is to create a replacement and commit using the functions described in Documentation/credentials.txt (which will be added by a later patch). This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). This now prepares and commits credentials in various places in the security code rather than altering the current creds directly. (2) Temporary credential overrides. do_coredump() and sys_faccessat() now prepare their own credentials and temporarily override the ones currently on the acting thread, whilst preventing interference from other threads by holding cred_replace_mutex on the thread being dumped. This will be replaced in a future patch by something that hands down the credentials directly to the functions being called, rather than altering the task's objective credentials. (3) LSM interface. A number of functions have been changed, added or removed: (*) security_capset_check(), ->capset_check() (*) security_capset_set(), ->capset_set() Removed in favour of security_capset(). (*) security_capset(), ->capset() New. This is passed a pointer to the new creds, a pointer to the old creds and the proposed capability sets. It should fill in the new creds or return an error. All pointers, barring the pointer to the new creds, are now const. (*) security_bprm_apply_creds(), ->bprm_apply_creds() Changed; now returns a value, which will cause the process to be killed if it's an error. (*) security_task_alloc(), ->task_alloc_security() Removed in favour of security_prepare_creds(). (*) security_cred_free(), ->cred_free() New. Free security data attached to cred->security. (*) security_prepare_creds(), ->cred_prepare() New. Duplicate any security data attached to cred->security. (*) security_commit_creds(), ->cred_commit() New. Apply any security effects for the upcoming installation of new security by commit_creds(). (*) security_task_post_setuid(), ->task_post_setuid() Removed in favour of security_task_fix_setuid(). (*) security_task_fix_setuid(), ->task_fix_setuid() Fix up the proposed new credentials for setuid(). This is used by cap_set_fix_setuid() to implicitly adjust capabilities in line with setuid() changes. Changes are made to the new credentials, rather than the task itself as in security_task_post_setuid(). (*) security_task_reparent_to_init(), ->task_reparent_to_init() Removed. Instead the task being reparented to init is referred directly to init's credentials. NOTE! This results in the loss of some state: SELinux's osid no longer records the sid of the thread that forked it. (*) security_key_alloc(), ->key_alloc() (*) security_key_permission(), ->key_permission() Changed. These now take cred pointers rather than task pointers to refer to the security context. (4) sys_capset(). This has been simplified and uses less locking. The LSM functions it calls have been merged. (5) reparent_to_kthreadd(). This gives the current thread the same credentials as init by simply using commit_thread() to point that way. (6) __sigqueue_alloc() and switch_uid() __sigqueue_alloc() can't stop the target task from changing its creds beneath it, so this function gets a reference to the currently applicable user_struct which it then passes into the sigqueue struct it returns if successful. switch_uid() is now called from commit_creds(), and possibly should be folded into that. commit_creds() should take care of protecting __sigqueue_alloc(). (7) [sg]et[ug]id() and co and [sg]et_current_groups. The set functions now all use prepare_creds(), commit_creds() and abort_creds() to build and check a new set of credentials before applying it. security_task_set[ug]id() is called inside the prepared section. This guarantees that nothing else will affect the creds until we've finished. The calling of set_dumpable() has been moved into commit_creds(). Much of the functionality of set_user() has been moved into commit_creds(). The get functions all simply access the data directly. (8) security_task_prctl() and cap_task_prctl(). security_task_prctl() has been modified to return -ENOSYS if it doesn't want to handle a function, or otherwise return the return value directly rather than through an argument. Additionally, cap_task_prctl() now prepares a new set of credentials, even if it doesn't end up using it. (9) Keyrings. A number of changes have been made to the keyrings code: (a) switch_uid_keyring(), copy_keys(), exit_keys() and suid_keys() have all been dropped and built in to the credentials functions directly. They may want separating out again later. (b) key_alloc() and search_process_keyrings() now take a cred pointer rather than a task pointer to specify the security context. (c) copy_creds() gives a new thread within the same thread group a new thread keyring if its parent had one, otherwise it discards the thread keyring. (d) The authorisation key now points directly to the credentials to extend the search into rather pointing to the task that carries them. (e) Installing thread, process or session keyrings causes a new set of credentials to be created, even though it's not strictly necessary for process or session keyrings (they're shared). (10) Usermode helper. The usermode helper code now carries a cred struct pointer in its subprocess_info struct instead of a new session keyring pointer. This set of credentials is derived from init_cred and installed on the new process after it has been cloned. call_usermodehelper_setup() allocates the new credentials and call_usermodehelper_freeinfo() discards them if they haven't been used. A special cred function (prepare_usermodeinfo_creds()) is provided specifically for call_usermodehelper_setup() to call. call_usermodehelper_setkeys() adjusts the credentials to sport the supplied keyring as the new session keyring. (11) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) selinux_setprocattr() no longer does its check for whether the current ptracer can access processes with the new SID inside the lock that covers getting the ptracer's SID. Whilst this lock ensures that the check is done with the ptracer pinned, the result is only valid until the lock is released, so there's no point doing it inside the lock. (12) is_single_threaded(). This function has been extracted from selinux_setprocattr() and put into a file of its own in the lib/ directory as join_session_keyring() now wants to use it too. The code in SELinux just checked to see whether a task shared mm_structs with other tasks (CLONE_VM), but that isn't good enough. We really want to know if they're part of the same thread group (CLONE_THREAD). (13) nfsd. The NFS server daemon now has to use the COW credentials to set the credentials it is going to use. It really needs to pass the credentials down to the functions it calls, but it can't do that until other patches in this series have been applied. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 16:39:23 -07:00
goto set;
[PATCH] Keys: Make request-key create an authorisation key The attached patch makes the following changes: (1) There's a new special key type called ".request_key_auth". This is an authorisation key for when one process requests a key and another process is started to construct it. This type of key cannot be created by the user; nor can it be requested by kernel services. Authorisation keys hold two references: (a) Each refers to a key being constructed. When the key being constructed is instantiated the authorisation key is revoked, rendering it of no further use. (b) The "authorising process". This is either: (i) the process that called request_key(), or: (ii) if the process that called request_key() itself had an authorisation key in its session keyring, then the authorising process referred to by that authorisation key will also be referred to by the new authorisation key. This means that the process that initiated a chain of key requests will authorise the lot of them, and will, by default, wind up with the keys obtained from them in its keyrings. (2) request_key() creates an authorisation key which is then passed to /sbin/request-key in as part of a new session keyring. (3) When request_key() is searching for a key to hand back to the caller, if it comes across an authorisation key in the session keyring of the calling process, it will also search the keyrings of the process specified therein and it will use the specified process's credentials (fsuid, fsgid, groups) to do that rather than the calling process's credentials. This allows a process started by /sbin/request-key to find keys belonging to the authorising process. (4) A key can be read, even if the process executing KEYCTL_READ doesn't have direct read or search permission if that key is contained within the keyrings of a process specified by an authorisation key found within the calling process's session keyring, and is searchable using the credentials of the authorising process. This allows a process started by /sbin/request-key to read keys belonging to the authorising process. (5) The magic KEY_SPEC_*_KEYRING key IDs when passed to KEYCTL_INSTANTIATE or KEYCTL_NEGATE will specify a keyring of the authorising process, rather than the process doing the instantiation. (6) One of the process keyrings can be nominated as the default to which request_key() should attach new keys if not otherwise specified. This is done with KEYCTL_SET_REQKEY_KEYRING and one of the KEY_REQKEY_DEFL_* constants. The current setting can also be read using this call. (7) request_key() is partially interruptible. If it is waiting for another process to finish constructing a key, it can be interrupted. This permits a request-key cycle to be broken without recourse to rebooting. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-Off-By: Benoit Boissinot <benoit.boissinot@ens-lyon.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 23:00:56 -06:00
case KEY_REQKEY_DEFL_DEFAULT:
case KEY_REQKEY_DEFL_SESSION_KEYRING:
case KEY_REQKEY_DEFL_USER_KEYRING:
case KEY_REQKEY_DEFL_USER_SESSION_KEYRING:
CRED: Inaugurate COW credentials Inaugurate copy-on-write credentials management. This uses RCU to manage the credentials pointer in the task_struct with respect to accesses by other tasks. A process may only modify its own credentials, and so does not need locking to access or modify its own credentials. A mutex (cred_replace_mutex) is added to the task_struct to control the effect of PTRACE_ATTACHED on credential calculations, particularly with respect to execve(). With this patch, the contents of an active credentials struct may not be changed directly; rather a new set of credentials must be prepared, modified and committed using something like the following sequence of events: struct cred *new = prepare_creds(); int ret = blah(new); if (ret < 0) { abort_creds(new); return ret; } return commit_creds(new); There are some exceptions to this rule: the keyrings pointed to by the active credentials may be instantiated - keyrings violate the COW rule as managing COW keyrings is tricky, given that it is possible for a task to directly alter the keys in a keyring in use by another task. To help enforce this, various pointers to sets of credentials, such as those in the task_struct, are declared const. The purpose of this is compile-time discouragement of altering credentials through those pointers. Once a set of credentials has been made public through one of these pointers, it may not be modified, except under special circumstances: (1) Its reference count may incremented and decremented. (2) The keyrings to which it points may be modified, but not replaced. The only safe way to modify anything else is to create a replacement and commit using the functions described in Documentation/credentials.txt (which will be added by a later patch). This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). This now prepares and commits credentials in various places in the security code rather than altering the current creds directly. (2) Temporary credential overrides. do_coredump() and sys_faccessat() now prepare their own credentials and temporarily override the ones currently on the acting thread, whilst preventing interference from other threads by holding cred_replace_mutex on the thread being dumped. This will be replaced in a future patch by something that hands down the credentials directly to the functions being called, rather than altering the task's objective credentials. (3) LSM interface. A number of functions have been changed, added or removed: (*) security_capset_check(), ->capset_check() (*) security_capset_set(), ->capset_set() Removed in favour of security_capset(). (*) security_capset(), ->capset() New. This is passed a pointer to the new creds, a pointer to the old creds and the proposed capability sets. It should fill in the new creds or return an error. All pointers, barring the pointer to the new creds, are now const. (*) security_bprm_apply_creds(), ->bprm_apply_creds() Changed; now returns a value, which will cause the process to be killed if it's an error. (*) security_task_alloc(), ->task_alloc_security() Removed in favour of security_prepare_creds(). (*) security_cred_free(), ->cred_free() New. Free security data attached to cred->security. (*) security_prepare_creds(), ->cred_prepare() New. Duplicate any security data attached to cred->security. (*) security_commit_creds(), ->cred_commit() New. Apply any security effects for the upcoming installation of new security by commit_creds(). (*) security_task_post_setuid(), ->task_post_setuid() Removed in favour of security_task_fix_setuid(). (*) security_task_fix_setuid(), ->task_fix_setuid() Fix up the proposed new credentials for setuid(). This is used by cap_set_fix_setuid() to implicitly adjust capabilities in line with setuid() changes. Changes are made to the new credentials, rather than the task itself as in security_task_post_setuid(). (*) security_task_reparent_to_init(), ->task_reparent_to_init() Removed. Instead the task being reparented to init is referred directly to init's credentials. NOTE! This results in the loss of some state: SELinux's osid no longer records the sid of the thread that forked it. (*) security_key_alloc(), ->key_alloc() (*) security_key_permission(), ->key_permission() Changed. These now take cred pointers rather than task pointers to refer to the security context. (4) sys_capset(). This has been simplified and uses less locking. The LSM functions it calls have been merged. (5) reparent_to_kthreadd(). This gives the current thread the same credentials as init by simply using commit_thread() to point that way. (6) __sigqueue_alloc() and switch_uid() __sigqueue_alloc() can't stop the target task from changing its creds beneath it, so this function gets a reference to the currently applicable user_struct which it then passes into the sigqueue struct it returns if successful. switch_uid() is now called from commit_creds(), and possibly should be folded into that. commit_creds() should take care of protecting __sigqueue_alloc(). (7) [sg]et[ug]id() and co and [sg]et_current_groups. The set functions now all use prepare_creds(), commit_creds() and abort_creds() to build and check a new set of credentials before applying it. security_task_set[ug]id() is called inside the prepared section. This guarantees that nothing else will affect the creds until we've finished. The calling of set_dumpable() has been moved into commit_creds(). Much of the functionality of set_user() has been moved into commit_creds(). The get functions all simply access the data directly. (8) security_task_prctl() and cap_task_prctl(). security_task_prctl() has been modified to return -ENOSYS if it doesn't want to handle a function, or otherwise return the return value directly rather than through an argument. Additionally, cap_task_prctl() now prepares a new set of credentials, even if it doesn't end up using it. (9) Keyrings. A number of changes have been made to the keyrings code: (a) switch_uid_keyring(), copy_keys(), exit_keys() and suid_keys() have all been dropped and built in to the credentials functions directly. They may want separating out again later. (b) key_alloc() and search_process_keyrings() now take a cred pointer rather than a task pointer to specify the security context. (c) copy_creds() gives a new thread within the same thread group a new thread keyring if its parent had one, otherwise it discards the thread keyring. (d) The authorisation key now points directly to the credentials to extend the search into rather pointing to the task that carries them. (e) Installing thread, process or session keyrings causes a new set of credentials to be created, even though it's not strictly necessary for process or session keyrings (they're shared). (10) Usermode helper. The usermode helper code now carries a cred struct pointer in its subprocess_info struct instead of a new session keyring pointer. This set of credentials is derived from init_cred and installed on the new process after it has been cloned. call_usermodehelper_setup() allocates the new credentials and call_usermodehelper_freeinfo() discards them if they haven't been used. A special cred function (prepare_usermodeinfo_creds()) is provided specifically for call_usermodehelper_setup() to call. call_usermodehelper_setkeys() adjusts the credentials to sport the supplied keyring as the new session keyring. (11) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) selinux_setprocattr() no longer does its check for whether the current ptracer can access processes with the new SID inside the lock that covers getting the ptracer's SID. Whilst this lock ensures that the check is done with the ptracer pinned, the result is only valid until the lock is released, so there's no point doing it inside the lock. (12) is_single_threaded(). This function has been extracted from selinux_setprocattr() and put into a file of its own in the lib/ directory as join_session_keyring() now wants to use it too. The code in SELinux just checked to see whether a task shared mm_structs with other tasks (CLONE_VM), but that isn't good enough. We really want to know if they're part of the same thread group (CLONE_THREAD). (13) nfsd. The NFS server daemon now has to use the COW credentials to set the credentials it is going to use. It really needs to pass the credentials down to the functions it calls, but it can't do that until other patches in this series have been applied. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 16:39:23 -07:00
case KEY_REQKEY_DEFL_REQUESTOR_KEYRING:
goto set;
[PATCH] Keys: Make request-key create an authorisation key The attached patch makes the following changes: (1) There's a new special key type called ".request_key_auth". This is an authorisation key for when one process requests a key and another process is started to construct it. This type of key cannot be created by the user; nor can it be requested by kernel services. Authorisation keys hold two references: (a) Each refers to a key being constructed. When the key being constructed is instantiated the authorisation key is revoked, rendering it of no further use. (b) The "authorising process". This is either: (i) the process that called request_key(), or: (ii) if the process that called request_key() itself had an authorisation key in its session keyring, then the authorising process referred to by that authorisation key will also be referred to by the new authorisation key. This means that the process that initiated a chain of key requests will authorise the lot of them, and will, by default, wind up with the keys obtained from them in its keyrings. (2) request_key() creates an authorisation key which is then passed to /sbin/request-key in as part of a new session keyring. (3) When request_key() is searching for a key to hand back to the caller, if it comes across an authorisation key in the session keyring of the calling process, it will also search the keyrings of the process specified therein and it will use the specified process's credentials (fsuid, fsgid, groups) to do that rather than the calling process's credentials. This allows a process started by /sbin/request-key to find keys belonging to the authorising process. (4) A key can be read, even if the process executing KEYCTL_READ doesn't have direct read or search permission if that key is contained within the keyrings of a process specified by an authorisation key found within the calling process's session keyring, and is searchable using the credentials of the authorising process. This allows a process started by /sbin/request-key to read keys belonging to the authorising process. (5) The magic KEY_SPEC_*_KEYRING key IDs when passed to KEYCTL_INSTANTIATE or KEYCTL_NEGATE will specify a keyring of the authorising process, rather than the process doing the instantiation. (6) One of the process keyrings can be nominated as the default to which request_key() should attach new keys if not otherwise specified. This is done with KEYCTL_SET_REQKEY_KEYRING and one of the KEY_REQKEY_DEFL_* constants. The current setting can also be read using this call. (7) request_key() is partially interruptible. If it is waiting for another process to finish constructing a key, it can be interrupted. This permits a request-key cycle to be broken without recourse to rebooting. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-Off-By: Benoit Boissinot <benoit.boissinot@ens-lyon.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 23:00:56 -06:00
case KEY_REQKEY_DEFL_NO_CHANGE:
case KEY_REQKEY_DEFL_GROUP_KEYRING:
default:
CRED: Inaugurate COW credentials Inaugurate copy-on-write credentials management. This uses RCU to manage the credentials pointer in the task_struct with respect to accesses by other tasks. A process may only modify its own credentials, and so does not need locking to access or modify its own credentials. A mutex (cred_replace_mutex) is added to the task_struct to control the effect of PTRACE_ATTACHED on credential calculations, particularly with respect to execve(). With this patch, the contents of an active credentials struct may not be changed directly; rather a new set of credentials must be prepared, modified and committed using something like the following sequence of events: struct cred *new = prepare_creds(); int ret = blah(new); if (ret < 0) { abort_creds(new); return ret; } return commit_creds(new); There are some exceptions to this rule: the keyrings pointed to by the active credentials may be instantiated - keyrings violate the COW rule as managing COW keyrings is tricky, given that it is possible for a task to directly alter the keys in a keyring in use by another task. To help enforce this, various pointers to sets of credentials, such as those in the task_struct, are declared const. The purpose of this is compile-time discouragement of altering credentials through those pointers. Once a set of credentials has been made public through one of these pointers, it may not be modified, except under special circumstances: (1) Its reference count may incremented and decremented. (2) The keyrings to which it points may be modified, but not replaced. The only safe way to modify anything else is to create a replacement and commit using the functions described in Documentation/credentials.txt (which will be added by a later patch). This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). This now prepares and commits credentials in various places in the security code rather than altering the current creds directly. (2) Temporary credential overrides. do_coredump() and sys_faccessat() now prepare their own credentials and temporarily override the ones currently on the acting thread, whilst preventing interference from other threads by holding cred_replace_mutex on the thread being dumped. This will be replaced in a future patch by something that hands down the credentials directly to the functions being called, rather than altering the task's objective credentials. (3) LSM interface. A number of functions have been changed, added or removed: (*) security_capset_check(), ->capset_check() (*) security_capset_set(), ->capset_set() Removed in favour of security_capset(). (*) security_capset(), ->capset() New. This is passed a pointer to the new creds, a pointer to the old creds and the proposed capability sets. It should fill in the new creds or return an error. All pointers, barring the pointer to the new creds, are now const. (*) security_bprm_apply_creds(), ->bprm_apply_creds() Changed; now returns a value, which will cause the process to be killed if it's an error. (*) security_task_alloc(), ->task_alloc_security() Removed in favour of security_prepare_creds(). (*) security_cred_free(), ->cred_free() New. Free security data attached to cred->security. (*) security_prepare_creds(), ->cred_prepare() New. Duplicate any security data attached to cred->security. (*) security_commit_creds(), ->cred_commit() New. Apply any security effects for the upcoming installation of new security by commit_creds(). (*) security_task_post_setuid(), ->task_post_setuid() Removed in favour of security_task_fix_setuid(). (*) security_task_fix_setuid(), ->task_fix_setuid() Fix up the proposed new credentials for setuid(). This is used by cap_set_fix_setuid() to implicitly adjust capabilities in line with setuid() changes. Changes are made to the new credentials, rather than the task itself as in security_task_post_setuid(). (*) security_task_reparent_to_init(), ->task_reparent_to_init() Removed. Instead the task being reparented to init is referred directly to init's credentials. NOTE! This results in the loss of some state: SELinux's osid no longer records the sid of the thread that forked it. (*) security_key_alloc(), ->key_alloc() (*) security_key_permission(), ->key_permission() Changed. These now take cred pointers rather than task pointers to refer to the security context. (4) sys_capset(). This has been simplified and uses less locking. The LSM functions it calls have been merged. (5) reparent_to_kthreadd(). This gives the current thread the same credentials as init by simply using commit_thread() to point that way. (6) __sigqueue_alloc() and switch_uid() __sigqueue_alloc() can't stop the target task from changing its creds beneath it, so this function gets a reference to the currently applicable user_struct which it then passes into the sigqueue struct it returns if successful. switch_uid() is now called from commit_creds(), and possibly should be folded into that. commit_creds() should take care of protecting __sigqueue_alloc(). (7) [sg]et[ug]id() and co and [sg]et_current_groups. The set functions now all use prepare_creds(), commit_creds() and abort_creds() to build and check a new set of credentials before applying it. security_task_set[ug]id() is called inside the prepared section. This guarantees that nothing else will affect the creds until we've finished. The calling of set_dumpable() has been moved into commit_creds(). Much of the functionality of set_user() has been moved into commit_creds(). The get functions all simply access the data directly. (8) security_task_prctl() and cap_task_prctl(). security_task_prctl() has been modified to return -ENOSYS if it doesn't want to handle a function, or otherwise return the return value directly rather than through an argument. Additionally, cap_task_prctl() now prepares a new set of credentials, even if it doesn't end up using it. (9) Keyrings. A number of changes have been made to the keyrings code: (a) switch_uid_keyring(), copy_keys(), exit_keys() and suid_keys() have all been dropped and built in to the credentials functions directly. They may want separating out again later. (b) key_alloc() and search_process_keyrings() now take a cred pointer rather than a task pointer to specify the security context. (c) copy_creds() gives a new thread within the same thread group a new thread keyring if its parent had one, otherwise it discards the thread keyring. (d) The authorisation key now points directly to the credentials to extend the search into rather pointing to the task that carries them. (e) Installing thread, process or session keyrings causes a new set of credentials to be created, even though it's not strictly necessary for process or session keyrings (they're shared). (10) Usermode helper. The usermode helper code now carries a cred struct pointer in its subprocess_info struct instead of a new session keyring pointer. This set of credentials is derived from init_cred and installed on the new process after it has been cloned. call_usermodehelper_setup() allocates the new credentials and call_usermodehelper_freeinfo() discards them if they haven't been used. A special cred function (prepare_usermodeinfo_creds()) is provided specifically for call_usermodehelper_setup() to call. call_usermodehelper_setkeys() adjusts the credentials to sport the supplied keyring as the new session keyring. (11) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) selinux_setprocattr() no longer does its check for whether the current ptracer can access processes with the new SID inside the lock that covers getting the ptracer's SID. Whilst this lock ensures that the check is done with the ptracer pinned, the result is only valid until the lock is released, so there's no point doing it inside the lock. (12) is_single_threaded(). This function has been extracted from selinux_setprocattr() and put into a file of its own in the lib/ directory as join_session_keyring() now wants to use it too. The code in SELinux just checked to see whether a task shared mm_structs with other tasks (CLONE_VM), but that isn't good enough. We really want to know if they're part of the same thread group (CLONE_THREAD). (13) nfsd. The NFS server daemon now has to use the COW credentials to set the credentials it is going to use. It really needs to pass the credentials down to the functions it calls, but it can't do that until other patches in this series have been applied. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 16:39:23 -07:00
ret = -EINVAL;
goto error;
[PATCH] Keys: Make request-key create an authorisation key The attached patch makes the following changes: (1) There's a new special key type called ".request_key_auth". This is an authorisation key for when one process requests a key and another process is started to construct it. This type of key cannot be created by the user; nor can it be requested by kernel services. Authorisation keys hold two references: (a) Each refers to a key being constructed. When the key being constructed is instantiated the authorisation key is revoked, rendering it of no further use. (b) The "authorising process". This is either: (i) the process that called request_key(), or: (ii) if the process that called request_key() itself had an authorisation key in its session keyring, then the authorising process referred to by that authorisation key will also be referred to by the new authorisation key. This means that the process that initiated a chain of key requests will authorise the lot of them, and will, by default, wind up with the keys obtained from them in its keyrings. (2) request_key() creates an authorisation key which is then passed to /sbin/request-key in as part of a new session keyring. (3) When request_key() is searching for a key to hand back to the caller, if it comes across an authorisation key in the session keyring of the calling process, it will also search the keyrings of the process specified therein and it will use the specified process's credentials (fsuid, fsgid, groups) to do that rather than the calling process's credentials. This allows a process started by /sbin/request-key to find keys belonging to the authorising process. (4) A key can be read, even if the process executing KEYCTL_READ doesn't have direct read or search permission if that key is contained within the keyrings of a process specified by an authorisation key found within the calling process's session keyring, and is searchable using the credentials of the authorising process. This allows a process started by /sbin/request-key to read keys belonging to the authorising process. (5) The magic KEY_SPEC_*_KEYRING key IDs when passed to KEYCTL_INSTANTIATE or KEYCTL_NEGATE will specify a keyring of the authorising process, rather than the process doing the instantiation. (6) One of the process keyrings can be nominated as the default to which request_key() should attach new keys if not otherwise specified. This is done with KEYCTL_SET_REQKEY_KEYRING and one of the KEY_REQKEY_DEFL_* constants. The current setting can also be read using this call. (7) request_key() is partially interruptible. If it is waiting for another process to finish constructing a key, it can be interrupted. This permits a request-key cycle to be broken without recourse to rebooting. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-Off-By: Benoit Boissinot <benoit.boissinot@ens-lyon.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 23:00:56 -06:00
}
CRED: Inaugurate COW credentials Inaugurate copy-on-write credentials management. This uses RCU to manage the credentials pointer in the task_struct with respect to accesses by other tasks. A process may only modify its own credentials, and so does not need locking to access or modify its own credentials. A mutex (cred_replace_mutex) is added to the task_struct to control the effect of PTRACE_ATTACHED on credential calculations, particularly with respect to execve(). With this patch, the contents of an active credentials struct may not be changed directly; rather a new set of credentials must be prepared, modified and committed using something like the following sequence of events: struct cred *new = prepare_creds(); int ret = blah(new); if (ret < 0) { abort_creds(new); return ret; } return commit_creds(new); There are some exceptions to this rule: the keyrings pointed to by the active credentials may be instantiated - keyrings violate the COW rule as managing COW keyrings is tricky, given that it is possible for a task to directly alter the keys in a keyring in use by another task. To help enforce this, various pointers to sets of credentials, such as those in the task_struct, are declared const. The purpose of this is compile-time discouragement of altering credentials through those pointers. Once a set of credentials has been made public through one of these pointers, it may not be modified, except under special circumstances: (1) Its reference count may incremented and decremented. (2) The keyrings to which it points may be modified, but not replaced. The only safe way to modify anything else is to create a replacement and commit using the functions described in Documentation/credentials.txt (which will be added by a later patch). This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). This now prepares and commits credentials in various places in the security code rather than altering the current creds directly. (2) Temporary credential overrides. do_coredump() and sys_faccessat() now prepare their own credentials and temporarily override the ones currently on the acting thread, whilst preventing interference from other threads by holding cred_replace_mutex on the thread being dumped. This will be replaced in a future patch by something that hands down the credentials directly to the functions being called, rather than altering the task's objective credentials. (3) LSM interface. A number of functions have been changed, added or removed: (*) security_capset_check(), ->capset_check() (*) security_capset_set(), ->capset_set() Removed in favour of security_capset(). (*) security_capset(), ->capset() New. This is passed a pointer to the new creds, a pointer to the old creds and the proposed capability sets. It should fill in the new creds or return an error. All pointers, barring the pointer to the new creds, are now const. (*) security_bprm_apply_creds(), ->bprm_apply_creds() Changed; now returns a value, which will cause the process to be killed if it's an error. (*) security_task_alloc(), ->task_alloc_security() Removed in favour of security_prepare_creds(). (*) security_cred_free(), ->cred_free() New. Free security data attached to cred->security. (*) security_prepare_creds(), ->cred_prepare() New. Duplicate any security data attached to cred->security. (*) security_commit_creds(), ->cred_commit() New. Apply any security effects for the upcoming installation of new security by commit_creds(). (*) security_task_post_setuid(), ->task_post_setuid() Removed in favour of security_task_fix_setuid(). (*) security_task_fix_setuid(), ->task_fix_setuid() Fix up the proposed new credentials for setuid(). This is used by cap_set_fix_setuid() to implicitly adjust capabilities in line with setuid() changes. Changes are made to the new credentials, rather than the task itself as in security_task_post_setuid(). (*) security_task_reparent_to_init(), ->task_reparent_to_init() Removed. Instead the task being reparented to init is referred directly to init's credentials. NOTE! This results in the loss of some state: SELinux's osid no longer records the sid of the thread that forked it. (*) security_key_alloc(), ->key_alloc() (*) security_key_permission(), ->key_permission() Changed. These now take cred pointers rather than task pointers to refer to the security context. (4) sys_capset(). This has been simplified and uses less locking. The LSM functions it calls have been merged. (5) reparent_to_kthreadd(). This gives the current thread the same credentials as init by simply using commit_thread() to point that way. (6) __sigqueue_alloc() and switch_uid() __sigqueue_alloc() can't stop the target task from changing its creds beneath it, so this function gets a reference to the currently applicable user_struct which it then passes into the sigqueue struct it returns if successful. switch_uid() is now called from commit_creds(), and possibly should be folded into that. commit_creds() should take care of protecting __sigqueue_alloc(). (7) [sg]et[ug]id() and co and [sg]et_current_groups. The set functions now all use prepare_creds(), commit_creds() and abort_creds() to build and check a new set of credentials before applying it. security_task_set[ug]id() is called inside the prepared section. This guarantees that nothing else will affect the creds until we've finished. The calling of set_dumpable() has been moved into commit_creds(). Much of the functionality of set_user() has been moved into commit_creds(). The get functions all simply access the data directly. (8) security_task_prctl() and cap_task_prctl(). security_task_prctl() has been modified to return -ENOSYS if it doesn't want to handle a function, or otherwise return the return value directly rather than through an argument. Additionally, cap_task_prctl() now prepares a new set of credentials, even if it doesn't end up using it. (9) Keyrings. A number of changes have been made to the keyrings code: (a) switch_uid_keyring(), copy_keys(), exit_keys() and suid_keys() have all been dropped and built in to the credentials functions directly. They may want separating out again later. (b) key_alloc() and search_process_keyrings() now take a cred pointer rather than a task pointer to specify the security context. (c) copy_creds() gives a new thread within the same thread group a new thread keyring if its parent had one, otherwise it discards the thread keyring. (d) The authorisation key now points directly to the credentials to extend the search into rather pointing to the task that carries them. (e) Installing thread, process or session keyrings causes a new set of credentials to be created, even though it's not strictly necessary for process or session keyrings (they're shared). (10) Usermode helper. The usermode helper code now carries a cred struct pointer in its subprocess_info struct instead of a new session keyring pointer. This set of credentials is derived from init_cred and installed on the new process after it has been cloned. call_usermodehelper_setup() allocates the new credentials and call_usermodehelper_freeinfo() discards them if they haven't been used. A special cred function (prepare_usermodeinfo_creds()) is provided specifically for call_usermodehelper_setup() to call. call_usermodehelper_setkeys() adjusts the credentials to sport the supplied keyring as the new session keyring. (11) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) selinux_setprocattr() no longer does its check for whether the current ptracer can access processes with the new SID inside the lock that covers getting the ptracer's SID. Whilst this lock ensures that the check is done with the ptracer pinned, the result is only valid until the lock is released, so there's no point doing it inside the lock. (12) is_single_threaded(). This function has been extracted from selinux_setprocattr() and put into a file of its own in the lib/ directory as join_session_keyring() now wants to use it too. The code in SELinux just checked to see whether a task shared mm_structs with other tasks (CLONE_VM), but that isn't good enough. We really want to know if they're part of the same thread group (CLONE_THREAD). (13) nfsd. The NFS server daemon now has to use the COW credentials to set the credentials it is going to use. It really needs to pass the credentials down to the functions it calls, but it can't do that until other patches in this series have been applied. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 16:39:23 -07:00
set:
new->jit_keyring = reqkey_defl;
commit_creds(new);
return old_setting;
error:
abort_creds(new);
return ret;
}
CRED: Inaugurate COW credentials Inaugurate copy-on-write credentials management. This uses RCU to manage the credentials pointer in the task_struct with respect to accesses by other tasks. A process may only modify its own credentials, and so does not need locking to access or modify its own credentials. A mutex (cred_replace_mutex) is added to the task_struct to control the effect of PTRACE_ATTACHED on credential calculations, particularly with respect to execve(). With this patch, the contents of an active credentials struct may not be changed directly; rather a new set of credentials must be prepared, modified and committed using something like the following sequence of events: struct cred *new = prepare_creds(); int ret = blah(new); if (ret < 0) { abort_creds(new); return ret; } return commit_creds(new); There are some exceptions to this rule: the keyrings pointed to by the active credentials may be instantiated - keyrings violate the COW rule as managing COW keyrings is tricky, given that it is possible for a task to directly alter the keys in a keyring in use by another task. To help enforce this, various pointers to sets of credentials, such as those in the task_struct, are declared const. The purpose of this is compile-time discouragement of altering credentials through those pointers. Once a set of credentials has been made public through one of these pointers, it may not be modified, except under special circumstances: (1) Its reference count may incremented and decremented. (2) The keyrings to which it points may be modified, but not replaced. The only safe way to modify anything else is to create a replacement and commit using the functions described in Documentation/credentials.txt (which will be added by a later patch). This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). This now prepares and commits credentials in various places in the security code rather than altering the current creds directly. (2) Temporary credential overrides. do_coredump() and sys_faccessat() now prepare their own credentials and temporarily override the ones currently on the acting thread, whilst preventing interference from other threads by holding cred_replace_mutex on the thread being dumped. This will be replaced in a future patch by something that hands down the credentials directly to the functions being called, rather than altering the task's objective credentials. (3) LSM interface. A number of functions have been changed, added or removed: (*) security_capset_check(), ->capset_check() (*) security_capset_set(), ->capset_set() Removed in favour of security_capset(). (*) security_capset(), ->capset() New. This is passed a pointer to the new creds, a pointer to the old creds and the proposed capability sets. It should fill in the new creds or return an error. All pointers, barring the pointer to the new creds, are now const. (*) security_bprm_apply_creds(), ->bprm_apply_creds() Changed; now returns a value, which will cause the process to be killed if it's an error. (*) security_task_alloc(), ->task_alloc_security() Removed in favour of security_prepare_creds(). (*) security_cred_free(), ->cred_free() New. Free security data attached to cred->security. (*) security_prepare_creds(), ->cred_prepare() New. Duplicate any security data attached to cred->security. (*) security_commit_creds(), ->cred_commit() New. Apply any security effects for the upcoming installation of new security by commit_creds(). (*) security_task_post_setuid(), ->task_post_setuid() Removed in favour of security_task_fix_setuid(). (*) security_task_fix_setuid(), ->task_fix_setuid() Fix up the proposed new credentials for setuid(). This is used by cap_set_fix_setuid() to implicitly adjust capabilities in line with setuid() changes. Changes are made to the new credentials, rather than the task itself as in security_task_post_setuid(). (*) security_task_reparent_to_init(), ->task_reparent_to_init() Removed. Instead the task being reparented to init is referred directly to init's credentials. NOTE! This results in the loss of some state: SELinux's osid no longer records the sid of the thread that forked it. (*) security_key_alloc(), ->key_alloc() (*) security_key_permission(), ->key_permission() Changed. These now take cred pointers rather than task pointers to refer to the security context. (4) sys_capset(). This has been simplified and uses less locking. The LSM functions it calls have been merged. (5) reparent_to_kthreadd(). This gives the current thread the same credentials as init by simply using commit_thread() to point that way. (6) __sigqueue_alloc() and switch_uid() __sigqueue_alloc() can't stop the target task from changing its creds beneath it, so this function gets a reference to the currently applicable user_struct which it then passes into the sigqueue struct it returns if successful. switch_uid() is now called from commit_creds(), and possibly should be folded into that. commit_creds() should take care of protecting __sigqueue_alloc(). (7) [sg]et[ug]id() and co and [sg]et_current_groups. The set functions now all use prepare_creds(), commit_creds() and abort_creds() to build and check a new set of credentials before applying it. security_task_set[ug]id() is called inside the prepared section. This guarantees that nothing else will affect the creds until we've finished. The calling of set_dumpable() has been moved into commit_creds(). Much of the functionality of set_user() has been moved into commit_creds(). The get functions all simply access the data directly. (8) security_task_prctl() and cap_task_prctl(). security_task_prctl() has been modified to return -ENOSYS if it doesn't want to handle a function, or otherwise return the return value directly rather than through an argument. Additionally, cap_task_prctl() now prepares a new set of credentials, even if it doesn't end up using it. (9) Keyrings. A number of changes have been made to the keyrings code: (a) switch_uid_keyring(), copy_keys(), exit_keys() and suid_keys() have all been dropped and built in to the credentials functions directly. They may want separating out again later. (b) key_alloc() and search_process_keyrings() now take a cred pointer rather than a task pointer to specify the security context. (c) copy_creds() gives a new thread within the same thread group a new thread keyring if its parent had one, otherwise it discards the thread keyring. (d) The authorisation key now points directly to the credentials to extend the search into rather pointing to the task that carries them. (e) Installing thread, process or session keyrings causes a new set of credentials to be created, even though it's not strictly necessary for process or session keyrings (they're shared). (10) Usermode helper. The usermode helper code now carries a cred struct pointer in its subprocess_info struct instead of a new session keyring pointer. This set of credentials is derived from init_cred and installed on the new process after it has been cloned. call_usermodehelper_setup() allocates the new credentials and call_usermodehelper_freeinfo() discards them if they haven't been used. A special cred function (prepare_usermodeinfo_creds()) is provided specifically for call_usermodehelper_setup() to call. call_usermodehelper_setkeys() adjusts the credentials to sport the supplied keyring as the new session keyring. (11) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) selinux_setprocattr() no longer does its check for whether the current ptracer can access processes with the new SID inside the lock that covers getting the ptracer's SID. Whilst this lock ensures that the check is done with the ptracer pinned, the result is only valid until the lock is released, so there's no point doing it inside the lock. (12) is_single_threaded(). This function has been extracted from selinux_setprocattr() and put into a file of its own in the lib/ directory as join_session_keyring() now wants to use it too. The code in SELinux just checked to see whether a task shared mm_structs with other tasks (CLONE_VM), but that isn't good enough. We really want to know if they're part of the same thread group (CLONE_THREAD). (13) nfsd. The NFS server daemon now has to use the COW credentials to set the credentials it is going to use. It really needs to pass the credentials down to the functions it calls, but it can't do that until other patches in this series have been applied. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 16:39:23 -07:00
/*
* Set or clear the timeout on a key.
*
* Either the key must grant the caller Setattr permission or else the caller
* must hold an instantiation authorisation token for the key.
*
* The timeout is either 0 to clear the timeout, or a number of seconds from
* the current time. The key and any links to the key will be automatically
* garbage collected after the timeout expires.
*
* Keys with KEY_FLAG_KEEP set should not be timed out.
*
* If successful, 0 is returned.
*/
long keyctl_set_timeout(key_serial_t id, unsigned timeout)
{
struct key *key, *instkey;
key_ref_t key_ref;
long ret;
key_ref = lookup_user_key(id, KEY_LOOKUP_CREATE | KEY_LOOKUP_PARTIAL,
keys: Replace uid/gid/perm permissions checking with an ACL Replace the uid/gid/perm permissions checking on a key with an ACL to allow the SETATTR and SEARCH permissions to be split. This will also allow a greater range of subjects to represented. ============ WHY DO THIS? ============ The problem is that SETATTR and SEARCH cover a slew of actions, not all of which should be grouped together. For SETATTR, this includes actions that are about controlling access to a key: (1) Changing a key's ownership. (2) Changing a key's security information. (3) Setting a keyring's restriction. And actions that are about managing a key's lifetime: (4) Setting an expiry time. (5) Revoking a key. and (proposed) managing a key as part of a cache: (6) Invalidating a key. Managing a key's lifetime doesn't really have anything to do with controlling access to that key. Expiry time is awkward since it's more about the lifetime of the content and so, in some ways goes better with WRITE permission. It can, however, be set unconditionally by a process with an appropriate authorisation token for instantiating a key, and can also be set by the key type driver when a key is instantiated, so lumping it with the access-controlling actions is probably okay. As for SEARCH permission, that currently covers: (1) Finding keys in a keyring tree during a search. (2) Permitting keyrings to be joined. (3) Invalidation. But these don't really belong together either, since these actions really need to be controlled separately. Finally, there are number of special cases to do with granting the administrator special rights to invalidate or clear keys that I would like to handle with the ACL rather than key flags and special checks. =============== WHAT IS CHANGED =============== The SETATTR permission is split to create two new permissions: (1) SET_SECURITY - which allows the key's owner, group and ACL to be changed and a restriction to be placed on a keyring. (2) REVOKE - which allows a key to be revoked. The SEARCH permission is split to create: (1) SEARCH - which allows a keyring to be search and a key to be found. (2) JOIN - which allows a keyring to be joined as a session keyring. (3) INVAL - which allows a key to be invalidated. The WRITE permission is also split to create: (1) WRITE - which allows a key's content to be altered and links to be added, removed and replaced in a keyring. (2) CLEAR - which allows a keyring to be cleared completely. This is split out to make it possible to give just this to an administrator. (3) REVOKE - see above. Keys acquire ACLs which consist of a series of ACEs, and all that apply are unioned together. An ACE specifies a subject, such as: (*) Possessor - permitted to anyone who 'possesses' a key (*) Owner - permitted to the key owner (*) Group - permitted to the key group (*) Everyone - permitted to everyone Note that 'Other' has been replaced with 'Everyone' on the assumption that you wouldn't grant a permit to 'Other' that you wouldn't also grant to everyone else. Further subjects may be made available by later patches. The ACE also specifies a permissions mask. The set of permissions is now: VIEW Can view the key metadata READ Can read the key content WRITE Can update/modify the key content SEARCH Can find the key by searching/requesting LINK Can make a link to the key SET_SECURITY Can change owner, ACL, expiry INVAL Can invalidate REVOKE Can revoke JOIN Can join this keyring CLEAR Can clear this keyring The KEYCTL_SETPERM function is then deprecated. The KEYCTL_SET_TIMEOUT function then is permitted if SET_SECURITY is set, or if the caller has a valid instantiation auth token. The KEYCTL_INVALIDATE function then requires INVAL. The KEYCTL_REVOKE function then requires REVOKE. The KEYCTL_JOIN_SESSION_KEYRING function then requires JOIN to join an existing keyring. The JOIN permission is enabled by default for session keyrings and manually created keyrings only. ====================== BACKWARD COMPATIBILITY ====================== To maintain backward compatibility, KEYCTL_SETPERM will translate the permissions mask it is given into a new ACL for a key - unless KEYCTL_SET_ACL has been called on that key, in which case an error will be returned. It will convert possessor, owner, group and other permissions into separate ACEs, if each portion of the mask is non-zero. SETATTR permission turns on all of INVAL, REVOKE and SET_SECURITY. WRITE permission turns on WRITE, REVOKE and, if a keyring, CLEAR. JOIN is turned on if a keyring is being altered. The KEYCTL_DESCRIBE function translates the ACL back into a permissions mask to return depending on possessor, owner, group and everyone ACEs. It will make the following mappings: (1) INVAL, JOIN -> SEARCH (2) SET_SECURITY -> SETATTR (3) REVOKE -> WRITE if SETATTR isn't already set (4) CLEAR -> WRITE Note that the value subsequently returned by KEYCTL_DESCRIBE may not match the value set with KEYCTL_SETATTR. ======= TESTING ======= This passes the keyutils testsuite for all but a couple of tests: (1) tests/keyctl/dh_compute/badargs: The first wrong-key-type test now returns EOPNOTSUPP rather than ENOKEY as READ permission isn't removed if the type doesn't have ->read(). You still can't actually read the key. (2) tests/keyctl/permitting/valid: The view-other-permissions test doesn't work as Other has been replaced with Everyone in the ACL. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-27 16:03:07 -06:00
KEY_NEED_SETSEC);
if (IS_ERR(key_ref)) {
/* setting the timeout on a key under construction is permitted
* if we have the authorisation token handy */
if (PTR_ERR(key_ref) == -EACCES) {
instkey = key_get_instantiation_authkey(id);
if (!IS_ERR(instkey)) {
key_put(instkey);
key_ref = lookup_user_key(id,
KEY_LOOKUP_PARTIAL,
0);
if (!IS_ERR(key_ref))
goto okay;
}
}
ret = PTR_ERR(key_ref);
goto error;
}
okay:
key = key_ref_to_ptr(key_ref);
ret = 0;
if (test_bit(KEY_FLAG_KEEP, &key->flags))
ret = -EPERM;
else
key_set_timeout(key, timeout);
key_put(key);
error:
return ret;
}
[PATCH] keys: Permit running process to instantiate keys Make it possible for a running process (such as gssapid) to be able to instantiate a key, as was requested by Trond Myklebust for NFS4. The patch makes the following changes: (1) A new, optional key type method has been added. This permits a key type to intercept requests at the point /sbin/request-key is about to be spawned and do something else with them - passing them over the rpc_pipefs files or netlink sockets for instance. The uninstantiated key, the authorisation key and the intended operation name are passed to the method. (2) The callout_info is no longer passed as an argument to /sbin/request-key to prevent unauthorised viewing of this data using ps or by looking in /proc/pid/cmdline. This means that the old /sbin/request-key program will not work with the patched kernel as it will expect to see an extra argument that is no longer there. A revised keyutils package will be made available tomorrow. (3) The callout_info is now attached to the authorisation key. Reading this key will retrieve the information. (4) A new field has been added to the task_struct. This holds the authorisation key currently active for a thread. Searches now look here for the caller's set of keys rather than looking for an auth key in the lowest level of the session keyring. This permits a thread to be servicing multiple requests at once and to switch between them. Note that this is per-thread, not per-process, and so is usable in multithreaded programs. The setting of this field is inherited across fork and exec. (5) A new keyctl function (KEYCTL_ASSUME_AUTHORITY) has been added that permits a thread to assume the authority to deal with an uninstantiated key. Assumption is only permitted if the authorisation key associated with the uninstantiated key is somewhere in the thread's keyrings. This function can also clear the assumption. (6) A new magic key specifier has been added to refer to the currently assumed authorisation key (KEY_SPEC_REQKEY_AUTH_KEY). (7) Instantiation will only proceed if the appropriate authorisation key is assumed first. The assumed authorisation key is discarded if instantiation is successful. (8) key_validate() is moved from the file of request_key functions to the file of permissions functions. (9) The documentation is updated. From: <Valdis.Kletnieks@vt.edu> Build fix. Signed-off-by: David Howells <dhowells@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Alexander Zangerl <az@bond.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:02:47 -07:00
/*
* Assume (or clear) the authority to instantiate the specified key.
*
* This sets the authoritative token currently in force for key instantiation.
* This must be done for a key to be instantiated. It has the effect of making
* available all the keys from the caller of the request_key() that created a
* key to request_key() calls made by the caller of this function.
*
* The caller must have the instantiation key in their process keyrings with a
* Search permission grant available to the caller.
*
* If the ID given is 0, then the setting will be cleared and 0 returned.
*
* If the ID given has a matching an authorisation key, then that key will be
* set and its ID will be returned. The authorisation key can be read to get
* the callout information passed to request_key().
[PATCH] keys: Permit running process to instantiate keys Make it possible for a running process (such as gssapid) to be able to instantiate a key, as was requested by Trond Myklebust for NFS4. The patch makes the following changes: (1) A new, optional key type method has been added. This permits a key type to intercept requests at the point /sbin/request-key is about to be spawned and do something else with them - passing them over the rpc_pipefs files or netlink sockets for instance. The uninstantiated key, the authorisation key and the intended operation name are passed to the method. (2) The callout_info is no longer passed as an argument to /sbin/request-key to prevent unauthorised viewing of this data using ps or by looking in /proc/pid/cmdline. This means that the old /sbin/request-key program will not work with the patched kernel as it will expect to see an extra argument that is no longer there. A revised keyutils package will be made available tomorrow. (3) The callout_info is now attached to the authorisation key. Reading this key will retrieve the information. (4) A new field has been added to the task_struct. This holds the authorisation key currently active for a thread. Searches now look here for the caller's set of keys rather than looking for an auth key in the lowest level of the session keyring. This permits a thread to be servicing multiple requests at once and to switch between them. Note that this is per-thread, not per-process, and so is usable in multithreaded programs. The setting of this field is inherited across fork and exec. (5) A new keyctl function (KEYCTL_ASSUME_AUTHORITY) has been added that permits a thread to assume the authority to deal with an uninstantiated key. Assumption is only permitted if the authorisation key associated with the uninstantiated key is somewhere in the thread's keyrings. This function can also clear the assumption. (6) A new magic key specifier has been added to refer to the currently assumed authorisation key (KEY_SPEC_REQKEY_AUTH_KEY). (7) Instantiation will only proceed if the appropriate authorisation key is assumed first. The assumed authorisation key is discarded if instantiation is successful. (8) key_validate() is moved from the file of request_key functions to the file of permissions functions. (9) The documentation is updated. From: <Valdis.Kletnieks@vt.edu> Build fix. Signed-off-by: David Howells <dhowells@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Alexander Zangerl <az@bond.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:02:47 -07:00
*/
long keyctl_assume_authority(key_serial_t id)
{
struct key *authkey;
long ret;
/* special key IDs aren't permitted */
ret = -EINVAL;
if (id < 0)
goto error;
/* we divest ourselves of authority if given an ID of 0 */
if (id == 0) {
CRED: Inaugurate COW credentials Inaugurate copy-on-write credentials management. This uses RCU to manage the credentials pointer in the task_struct with respect to accesses by other tasks. A process may only modify its own credentials, and so does not need locking to access or modify its own credentials. A mutex (cred_replace_mutex) is added to the task_struct to control the effect of PTRACE_ATTACHED on credential calculations, particularly with respect to execve(). With this patch, the contents of an active credentials struct may not be changed directly; rather a new set of credentials must be prepared, modified and committed using something like the following sequence of events: struct cred *new = prepare_creds(); int ret = blah(new); if (ret < 0) { abort_creds(new); return ret; } return commit_creds(new); There are some exceptions to this rule: the keyrings pointed to by the active credentials may be instantiated - keyrings violate the COW rule as managing COW keyrings is tricky, given that it is possible for a task to directly alter the keys in a keyring in use by another task. To help enforce this, various pointers to sets of credentials, such as those in the task_struct, are declared const. The purpose of this is compile-time discouragement of altering credentials through those pointers. Once a set of credentials has been made public through one of these pointers, it may not be modified, except under special circumstances: (1) Its reference count may incremented and decremented. (2) The keyrings to which it points may be modified, but not replaced. The only safe way to modify anything else is to create a replacement and commit using the functions described in Documentation/credentials.txt (which will be added by a later patch). This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). This now prepares and commits credentials in various places in the security code rather than altering the current creds directly. (2) Temporary credential overrides. do_coredump() and sys_faccessat() now prepare their own credentials and temporarily override the ones currently on the acting thread, whilst preventing interference from other threads by holding cred_replace_mutex on the thread being dumped. This will be replaced in a future patch by something that hands down the credentials directly to the functions being called, rather than altering the task's objective credentials. (3) LSM interface. A number of functions have been changed, added or removed: (*) security_capset_check(), ->capset_check() (*) security_capset_set(), ->capset_set() Removed in favour of security_capset(). (*) security_capset(), ->capset() New. This is passed a pointer to the new creds, a pointer to the old creds and the proposed capability sets. It should fill in the new creds or return an error. All pointers, barring the pointer to the new creds, are now const. (*) security_bprm_apply_creds(), ->bprm_apply_creds() Changed; now returns a value, which will cause the process to be killed if it's an error. (*) security_task_alloc(), ->task_alloc_security() Removed in favour of security_prepare_creds(). (*) security_cred_free(), ->cred_free() New. Free security data attached to cred->security. (*) security_prepare_creds(), ->cred_prepare() New. Duplicate any security data attached to cred->security. (*) security_commit_creds(), ->cred_commit() New. Apply any security effects for the upcoming installation of new security by commit_creds(). (*) security_task_post_setuid(), ->task_post_setuid() Removed in favour of security_task_fix_setuid(). (*) security_task_fix_setuid(), ->task_fix_setuid() Fix up the proposed new credentials for setuid(). This is used by cap_set_fix_setuid() to implicitly adjust capabilities in line with setuid() changes. Changes are made to the new credentials, rather than the task itself as in security_task_post_setuid(). (*) security_task_reparent_to_init(), ->task_reparent_to_init() Removed. Instead the task being reparented to init is referred directly to init's credentials. NOTE! This results in the loss of some state: SELinux's osid no longer records the sid of the thread that forked it. (*) security_key_alloc(), ->key_alloc() (*) security_key_permission(), ->key_permission() Changed. These now take cred pointers rather than task pointers to refer to the security context. (4) sys_capset(). This has been simplified and uses less locking. The LSM functions it calls have been merged. (5) reparent_to_kthreadd(). This gives the current thread the same credentials as init by simply using commit_thread() to point that way. (6) __sigqueue_alloc() and switch_uid() __sigqueue_alloc() can't stop the target task from changing its creds beneath it, so this function gets a reference to the currently applicable user_struct which it then passes into the sigqueue struct it returns if successful. switch_uid() is now called from commit_creds(), and possibly should be folded into that. commit_creds() should take care of protecting __sigqueue_alloc(). (7) [sg]et[ug]id() and co and [sg]et_current_groups. The set functions now all use prepare_creds(), commit_creds() and abort_creds() to build and check a new set of credentials before applying it. security_task_set[ug]id() is called inside the prepared section. This guarantees that nothing else will affect the creds until we've finished. The calling of set_dumpable() has been moved into commit_creds(). Much of the functionality of set_user() has been moved into commit_creds(). The get functions all simply access the data directly. (8) security_task_prctl() and cap_task_prctl(). security_task_prctl() has been modified to return -ENOSYS if it doesn't want to handle a function, or otherwise return the return value directly rather than through an argument. Additionally, cap_task_prctl() now prepares a new set of credentials, even if it doesn't end up using it. (9) Keyrings. A number of changes have been made to the keyrings code: (a) switch_uid_keyring(), copy_keys(), exit_keys() and suid_keys() have all been dropped and built in to the credentials functions directly. They may want separating out again later. (b) key_alloc() and search_process_keyrings() now take a cred pointer rather than a task pointer to specify the security context. (c) copy_creds() gives a new thread within the same thread group a new thread keyring if its parent had one, otherwise it discards the thread keyring. (d) The authorisation key now points directly to the credentials to extend the search into rather pointing to the task that carries them. (e) Installing thread, process or session keyrings causes a new set of credentials to be created, even though it's not strictly necessary for process or session keyrings (they're shared). (10) Usermode helper. The usermode helper code now carries a cred struct pointer in its subprocess_info struct instead of a new session keyring pointer. This set of credentials is derived from init_cred and installed on the new process after it has been cloned. call_usermodehelper_setup() allocates the new credentials and call_usermodehelper_freeinfo() discards them if they haven't been used. A special cred function (prepare_usermodeinfo_creds()) is provided specifically for call_usermodehelper_setup() to call. call_usermodehelper_setkeys() adjusts the credentials to sport the supplied keyring as the new session keyring. (11) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) selinux_setprocattr() no longer does its check for whether the current ptracer can access processes with the new SID inside the lock that covers getting the ptracer's SID. Whilst this lock ensures that the check is done with the ptracer pinned, the result is only valid until the lock is released, so there's no point doing it inside the lock. (12) is_single_threaded(). This function has been extracted from selinux_setprocattr() and put into a file of its own in the lib/ directory as join_session_keyring() now wants to use it too. The code in SELinux just checked to see whether a task shared mm_structs with other tasks (CLONE_VM), but that isn't good enough. We really want to know if they're part of the same thread group (CLONE_THREAD). (13) nfsd. The NFS server daemon now has to use the COW credentials to set the credentials it is going to use. It really needs to pass the credentials down to the functions it calls, but it can't do that until other patches in this series have been applied. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 16:39:23 -07:00
ret = keyctl_change_reqkey_auth(NULL);
[PATCH] keys: Permit running process to instantiate keys Make it possible for a running process (such as gssapid) to be able to instantiate a key, as was requested by Trond Myklebust for NFS4. The patch makes the following changes: (1) A new, optional key type method has been added. This permits a key type to intercept requests at the point /sbin/request-key is about to be spawned and do something else with them - passing them over the rpc_pipefs files or netlink sockets for instance. The uninstantiated key, the authorisation key and the intended operation name are passed to the method. (2) The callout_info is no longer passed as an argument to /sbin/request-key to prevent unauthorised viewing of this data using ps or by looking in /proc/pid/cmdline. This means that the old /sbin/request-key program will not work with the patched kernel as it will expect to see an extra argument that is no longer there. A revised keyutils package will be made available tomorrow. (3) The callout_info is now attached to the authorisation key. Reading this key will retrieve the information. (4) A new field has been added to the task_struct. This holds the authorisation key currently active for a thread. Searches now look here for the caller's set of keys rather than looking for an auth key in the lowest level of the session keyring. This permits a thread to be servicing multiple requests at once and to switch between them. Note that this is per-thread, not per-process, and so is usable in multithreaded programs. The setting of this field is inherited across fork and exec. (5) A new keyctl function (KEYCTL_ASSUME_AUTHORITY) has been added that permits a thread to assume the authority to deal with an uninstantiated key. Assumption is only permitted if the authorisation key associated with the uninstantiated key is somewhere in the thread's keyrings. This function can also clear the assumption. (6) A new magic key specifier has been added to refer to the currently assumed authorisation key (KEY_SPEC_REQKEY_AUTH_KEY). (7) Instantiation will only proceed if the appropriate authorisation key is assumed first. The assumed authorisation key is discarded if instantiation is successful. (8) key_validate() is moved from the file of request_key functions to the file of permissions functions. (9) The documentation is updated. From: <Valdis.Kletnieks@vt.edu> Build fix. Signed-off-by: David Howells <dhowells@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Alexander Zangerl <az@bond.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:02:47 -07:00
goto error;
}
/* attempt to assume the authority temporarily granted to us whilst we
* instantiate the specified key
* - the authorisation key must be in the current task's keyrings
* somewhere
*/
authkey = key_get_instantiation_authkey(id);
if (IS_ERR(authkey)) {
ret = PTR_ERR(authkey);
goto error;
}
CRED: Inaugurate COW credentials Inaugurate copy-on-write credentials management. This uses RCU to manage the credentials pointer in the task_struct with respect to accesses by other tasks. A process may only modify its own credentials, and so does not need locking to access or modify its own credentials. A mutex (cred_replace_mutex) is added to the task_struct to control the effect of PTRACE_ATTACHED on credential calculations, particularly with respect to execve(). With this patch, the contents of an active credentials struct may not be changed directly; rather a new set of credentials must be prepared, modified and committed using something like the following sequence of events: struct cred *new = prepare_creds(); int ret = blah(new); if (ret < 0) { abort_creds(new); return ret; } return commit_creds(new); There are some exceptions to this rule: the keyrings pointed to by the active credentials may be instantiated - keyrings violate the COW rule as managing COW keyrings is tricky, given that it is possible for a task to directly alter the keys in a keyring in use by another task. To help enforce this, various pointers to sets of credentials, such as those in the task_struct, are declared const. The purpose of this is compile-time discouragement of altering credentials through those pointers. Once a set of credentials has been made public through one of these pointers, it may not be modified, except under special circumstances: (1) Its reference count may incremented and decremented. (2) The keyrings to which it points may be modified, but not replaced. The only safe way to modify anything else is to create a replacement and commit using the functions described in Documentation/credentials.txt (which will be added by a later patch). This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). This now prepares and commits credentials in various places in the security code rather than altering the current creds directly. (2) Temporary credential overrides. do_coredump() and sys_faccessat() now prepare their own credentials and temporarily override the ones currently on the acting thread, whilst preventing interference from other threads by holding cred_replace_mutex on the thread being dumped. This will be replaced in a future patch by something that hands down the credentials directly to the functions being called, rather than altering the task's objective credentials. (3) LSM interface. A number of functions have been changed, added or removed: (*) security_capset_check(), ->capset_check() (*) security_capset_set(), ->capset_set() Removed in favour of security_capset(). (*) security_capset(), ->capset() New. This is passed a pointer to the new creds, a pointer to the old creds and the proposed capability sets. It should fill in the new creds or return an error. All pointers, barring the pointer to the new creds, are now const. (*) security_bprm_apply_creds(), ->bprm_apply_creds() Changed; now returns a value, which will cause the process to be killed if it's an error. (*) security_task_alloc(), ->task_alloc_security() Removed in favour of security_prepare_creds(). (*) security_cred_free(), ->cred_free() New. Free security data attached to cred->security. (*) security_prepare_creds(), ->cred_prepare() New. Duplicate any security data attached to cred->security. (*) security_commit_creds(), ->cred_commit() New. Apply any security effects for the upcoming installation of new security by commit_creds(). (*) security_task_post_setuid(), ->task_post_setuid() Removed in favour of security_task_fix_setuid(). (*) security_task_fix_setuid(), ->task_fix_setuid() Fix up the proposed new credentials for setuid(). This is used by cap_set_fix_setuid() to implicitly adjust capabilities in line with setuid() changes. Changes are made to the new credentials, rather than the task itself as in security_task_post_setuid(). (*) security_task_reparent_to_init(), ->task_reparent_to_init() Removed. Instead the task being reparented to init is referred directly to init's credentials. NOTE! This results in the loss of some state: SELinux's osid no longer records the sid of the thread that forked it. (*) security_key_alloc(), ->key_alloc() (*) security_key_permission(), ->key_permission() Changed. These now take cred pointers rather than task pointers to refer to the security context. (4) sys_capset(). This has been simplified and uses less locking. The LSM functions it calls have been merged. (5) reparent_to_kthreadd(). This gives the current thread the same credentials as init by simply using commit_thread() to point that way. (6) __sigqueue_alloc() and switch_uid() __sigqueue_alloc() can't stop the target task from changing its creds beneath it, so this function gets a reference to the currently applicable user_struct which it then passes into the sigqueue struct it returns if successful. switch_uid() is now called from commit_creds(), and possibly should be folded into that. commit_creds() should take care of protecting __sigqueue_alloc(). (7) [sg]et[ug]id() and co and [sg]et_current_groups. The set functions now all use prepare_creds(), commit_creds() and abort_creds() to build and check a new set of credentials before applying it. security_task_set[ug]id() is called inside the prepared section. This guarantees that nothing else will affect the creds until we've finished. The calling of set_dumpable() has been moved into commit_creds(). Much of the functionality of set_user() has been moved into commit_creds(). The get functions all simply access the data directly. (8) security_task_prctl() and cap_task_prctl(). security_task_prctl() has been modified to return -ENOSYS if it doesn't want to handle a function, or otherwise return the return value directly rather than through an argument. Additionally, cap_task_prctl() now prepares a new set of credentials, even if it doesn't end up using it. (9) Keyrings. A number of changes have been made to the keyrings code: (a) switch_uid_keyring(), copy_keys(), exit_keys() and suid_keys() have all been dropped and built in to the credentials functions directly. They may want separating out again later. (b) key_alloc() and search_process_keyrings() now take a cred pointer rather than a task pointer to specify the security context. (c) copy_creds() gives a new thread within the same thread group a new thread keyring if its parent had one, otherwise it discards the thread keyring. (d) The authorisation key now points directly to the credentials to extend the search into rather pointing to the task that carries them. (e) Installing thread, process or session keyrings causes a new set of credentials to be created, even though it's not strictly necessary for process or session keyrings (they're shared). (10) Usermode helper. The usermode helper code now carries a cred struct pointer in its subprocess_info struct instead of a new session keyring pointer. This set of credentials is derived from init_cred and installed on the new process after it has been cloned. call_usermodehelper_setup() allocates the new credentials and call_usermodehelper_freeinfo() discards them if they haven't been used. A special cred function (prepare_usermodeinfo_creds()) is provided specifically for call_usermodehelper_setup() to call. call_usermodehelper_setkeys() adjusts the credentials to sport the supplied keyring as the new session keyring. (11) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) selinux_setprocattr() no longer does its check for whether the current ptracer can access processes with the new SID inside the lock that covers getting the ptracer's SID. Whilst this lock ensures that the check is done with the ptracer pinned, the result is only valid until the lock is released, so there's no point doing it inside the lock. (12) is_single_threaded(). This function has been extracted from selinux_setprocattr() and put into a file of its own in the lib/ directory as join_session_keyring() now wants to use it too. The code in SELinux just checked to see whether a task shared mm_structs with other tasks (CLONE_VM), but that isn't good enough. We really want to know if they're part of the same thread group (CLONE_THREAD). (13) nfsd. The NFS server daemon now has to use the COW credentials to set the credentials it is going to use. It really needs to pass the credentials down to the functions it calls, but it can't do that until other patches in this series have been applied. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 16:39:23 -07:00
ret = keyctl_change_reqkey_auth(authkey);
if (ret == 0)
ret = authkey->serial;
CRED: Inaugurate COW credentials Inaugurate copy-on-write credentials management. This uses RCU to manage the credentials pointer in the task_struct with respect to accesses by other tasks. A process may only modify its own credentials, and so does not need locking to access or modify its own credentials. A mutex (cred_replace_mutex) is added to the task_struct to control the effect of PTRACE_ATTACHED on credential calculations, particularly with respect to execve(). With this patch, the contents of an active credentials struct may not be changed directly; rather a new set of credentials must be prepared, modified and committed using something like the following sequence of events: struct cred *new = prepare_creds(); int ret = blah(new); if (ret < 0) { abort_creds(new); return ret; } return commit_creds(new); There are some exceptions to this rule: the keyrings pointed to by the active credentials may be instantiated - keyrings violate the COW rule as managing COW keyrings is tricky, given that it is possible for a task to directly alter the keys in a keyring in use by another task. To help enforce this, various pointers to sets of credentials, such as those in the task_struct, are declared const. The purpose of this is compile-time discouragement of altering credentials through those pointers. Once a set of credentials has been made public through one of these pointers, it may not be modified, except under special circumstances: (1) Its reference count may incremented and decremented. (2) The keyrings to which it points may be modified, but not replaced. The only safe way to modify anything else is to create a replacement and commit using the functions described in Documentation/credentials.txt (which will be added by a later patch). This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). This now prepares and commits credentials in various places in the security code rather than altering the current creds directly. (2) Temporary credential overrides. do_coredump() and sys_faccessat() now prepare their own credentials and temporarily override the ones currently on the acting thread, whilst preventing interference from other threads by holding cred_replace_mutex on the thread being dumped. This will be replaced in a future patch by something that hands down the credentials directly to the functions being called, rather than altering the task's objective credentials. (3) LSM interface. A number of functions have been changed, added or removed: (*) security_capset_check(), ->capset_check() (*) security_capset_set(), ->capset_set() Removed in favour of security_capset(). (*) security_capset(), ->capset() New. This is passed a pointer to the new creds, a pointer to the old creds and the proposed capability sets. It should fill in the new creds or return an error. All pointers, barring the pointer to the new creds, are now const. (*) security_bprm_apply_creds(), ->bprm_apply_creds() Changed; now returns a value, which will cause the process to be killed if it's an error. (*) security_task_alloc(), ->task_alloc_security() Removed in favour of security_prepare_creds(). (*) security_cred_free(), ->cred_free() New. Free security data attached to cred->security. (*) security_prepare_creds(), ->cred_prepare() New. Duplicate any security data attached to cred->security. (*) security_commit_creds(), ->cred_commit() New. Apply any security effects for the upcoming installation of new security by commit_creds(). (*) security_task_post_setuid(), ->task_post_setuid() Removed in favour of security_task_fix_setuid(). (*) security_task_fix_setuid(), ->task_fix_setuid() Fix up the proposed new credentials for setuid(). This is used by cap_set_fix_setuid() to implicitly adjust capabilities in line with setuid() changes. Changes are made to the new credentials, rather than the task itself as in security_task_post_setuid(). (*) security_task_reparent_to_init(), ->task_reparent_to_init() Removed. Instead the task being reparented to init is referred directly to init's credentials. NOTE! This results in the loss of some state: SELinux's osid no longer records the sid of the thread that forked it. (*) security_key_alloc(), ->key_alloc() (*) security_key_permission(), ->key_permission() Changed. These now take cred pointers rather than task pointers to refer to the security context. (4) sys_capset(). This has been simplified and uses less locking. The LSM functions it calls have been merged. (5) reparent_to_kthreadd(). This gives the current thread the same credentials as init by simply using commit_thread() to point that way. (6) __sigqueue_alloc() and switch_uid() __sigqueue_alloc() can't stop the target task from changing its creds beneath it, so this function gets a reference to the currently applicable user_struct which it then passes into the sigqueue struct it returns if successful. switch_uid() is now called from commit_creds(), and possibly should be folded into that. commit_creds() should take care of protecting __sigqueue_alloc(). (7) [sg]et[ug]id() and co and [sg]et_current_groups. The set functions now all use prepare_creds(), commit_creds() and abort_creds() to build and check a new set of credentials before applying it. security_task_set[ug]id() is called inside the prepared section. This guarantees that nothing else will affect the creds until we've finished. The calling of set_dumpable() has been moved into commit_creds(). Much of the functionality of set_user() has been moved into commit_creds(). The get functions all simply access the data directly. (8) security_task_prctl() and cap_task_prctl(). security_task_prctl() has been modified to return -ENOSYS if it doesn't want to handle a function, or otherwise return the return value directly rather than through an argument. Additionally, cap_task_prctl() now prepares a new set of credentials, even if it doesn't end up using it. (9) Keyrings. A number of changes have been made to the keyrings code: (a) switch_uid_keyring(), copy_keys(), exit_keys() and suid_keys() have all been dropped and built in to the credentials functions directly. They may want separating out again later. (b) key_alloc() and search_process_keyrings() now take a cred pointer rather than a task pointer to specify the security context. (c) copy_creds() gives a new thread within the same thread group a new thread keyring if its parent had one, otherwise it discards the thread keyring. (d) The authorisation key now points directly to the credentials to extend the search into rather pointing to the task that carries them. (e) Installing thread, process or session keyrings causes a new set of credentials to be created, even though it's not strictly necessary for process or session keyrings (they're shared). (10) Usermode helper. The usermode helper code now carries a cred struct pointer in its subprocess_info struct instead of a new session keyring pointer. This set of credentials is derived from init_cred and installed on the new process after it has been cloned. call_usermodehelper_setup() allocates the new credentials and call_usermodehelper_freeinfo() discards them if they haven't been used. A special cred function (prepare_usermodeinfo_creds()) is provided specifically for call_usermodehelper_setup() to call. call_usermodehelper_setkeys() adjusts the credentials to sport the supplied keyring as the new session keyring. (11) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) selinux_setprocattr() no longer does its check for whether the current ptracer can access processes with the new SID inside the lock that covers getting the ptracer's SID. Whilst this lock ensures that the check is done with the ptracer pinned, the result is only valid until the lock is released, so there's no point doing it inside the lock. (12) is_single_threaded(). This function has been extracted from selinux_setprocattr() and put into a file of its own in the lib/ directory as join_session_keyring() now wants to use it too. The code in SELinux just checked to see whether a task shared mm_structs with other tasks (CLONE_VM), but that isn't good enough. We really want to know if they're part of the same thread group (CLONE_THREAD). (13) nfsd. The NFS server daemon now has to use the COW credentials to set the credentials it is going to use. It really needs to pass the credentials down to the functions it calls, but it can't do that until other patches in this series have been applied. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 16:39:23 -07:00
key_put(authkey);
[PATCH] keys: Permit running process to instantiate keys Make it possible for a running process (such as gssapid) to be able to instantiate a key, as was requested by Trond Myklebust for NFS4. The patch makes the following changes: (1) A new, optional key type method has been added. This permits a key type to intercept requests at the point /sbin/request-key is about to be spawned and do something else with them - passing them over the rpc_pipefs files or netlink sockets for instance. The uninstantiated key, the authorisation key and the intended operation name are passed to the method. (2) The callout_info is no longer passed as an argument to /sbin/request-key to prevent unauthorised viewing of this data using ps or by looking in /proc/pid/cmdline. This means that the old /sbin/request-key program will not work with the patched kernel as it will expect to see an extra argument that is no longer there. A revised keyutils package will be made available tomorrow. (3) The callout_info is now attached to the authorisation key. Reading this key will retrieve the information. (4) A new field has been added to the task_struct. This holds the authorisation key currently active for a thread. Searches now look here for the caller's set of keys rather than looking for an auth key in the lowest level of the session keyring. This permits a thread to be servicing multiple requests at once and to switch between them. Note that this is per-thread, not per-process, and so is usable in multithreaded programs. The setting of this field is inherited across fork and exec. (5) A new keyctl function (KEYCTL_ASSUME_AUTHORITY) has been added that permits a thread to assume the authority to deal with an uninstantiated key. Assumption is only permitted if the authorisation key associated with the uninstantiated key is somewhere in the thread's keyrings. This function can also clear the assumption. (6) A new magic key specifier has been added to refer to the currently assumed authorisation key (KEY_SPEC_REQKEY_AUTH_KEY). (7) Instantiation will only proceed if the appropriate authorisation key is assumed first. The assumed authorisation key is discarded if instantiation is successful. (8) key_validate() is moved from the file of request_key functions to the file of permissions functions. (9) The documentation is updated. From: <Valdis.Kletnieks@vt.edu> Build fix. Signed-off-by: David Howells <dhowells@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Alexander Zangerl <az@bond.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:02:47 -07:00
error:
return ret;
}
[PATCH] keys: Permit running process to instantiate keys Make it possible for a running process (such as gssapid) to be able to instantiate a key, as was requested by Trond Myklebust for NFS4. The patch makes the following changes: (1) A new, optional key type method has been added. This permits a key type to intercept requests at the point /sbin/request-key is about to be spawned and do something else with them - passing them over the rpc_pipefs files or netlink sockets for instance. The uninstantiated key, the authorisation key and the intended operation name are passed to the method. (2) The callout_info is no longer passed as an argument to /sbin/request-key to prevent unauthorised viewing of this data using ps or by looking in /proc/pid/cmdline. This means that the old /sbin/request-key program will not work with the patched kernel as it will expect to see an extra argument that is no longer there. A revised keyutils package will be made available tomorrow. (3) The callout_info is now attached to the authorisation key. Reading this key will retrieve the information. (4) A new field has been added to the task_struct. This holds the authorisation key currently active for a thread. Searches now look here for the caller's set of keys rather than looking for an auth key in the lowest level of the session keyring. This permits a thread to be servicing multiple requests at once and to switch between them. Note that this is per-thread, not per-process, and so is usable in multithreaded programs. The setting of this field is inherited across fork and exec. (5) A new keyctl function (KEYCTL_ASSUME_AUTHORITY) has been added that permits a thread to assume the authority to deal with an uninstantiated key. Assumption is only permitted if the authorisation key associated with the uninstantiated key is somewhere in the thread's keyrings. This function can also clear the assumption. (6) A new magic key specifier has been added to refer to the currently assumed authorisation key (KEY_SPEC_REQKEY_AUTH_KEY). (7) Instantiation will only proceed if the appropriate authorisation key is assumed first. The assumed authorisation key is discarded if instantiation is successful. (8) key_validate() is moved from the file of request_key functions to the file of permissions functions. (9) The documentation is updated. From: <Valdis.Kletnieks@vt.edu> Build fix. Signed-off-by: David Howells <dhowells@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Alexander Zangerl <az@bond.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:02:47 -07:00
/*
* Get a key's the LSM security label.
*
* The key must grant the caller View permission for this to work.
*
* If there's a buffer, then up to buflen bytes of data will be placed into it.
*
* If successful, the amount of information available will be returned,
* irrespective of how much was copied (including the terminal NUL).
*/
long keyctl_get_security(key_serial_t keyid,
char __user *buffer,
size_t buflen)
{
struct key *key, *instkey;
key_ref_t key_ref;
char *context;
long ret;
key_ref = lookup_user_key(keyid, KEY_LOOKUP_PARTIAL, KEY_NEED_VIEW);
if (IS_ERR(key_ref)) {
if (PTR_ERR(key_ref) != -EACCES)
return PTR_ERR(key_ref);
/* viewing a key under construction is also permitted if we
* have the authorisation token handy */
instkey = key_get_instantiation_authkey(keyid);
if (IS_ERR(instkey))
return PTR_ERR(instkey);
key_put(instkey);
key_ref = lookup_user_key(keyid, KEY_LOOKUP_PARTIAL, 0);
if (IS_ERR(key_ref))
return PTR_ERR(key_ref);
}
key = key_ref_to_ptr(key_ref);
ret = security_key_getsecurity(key, &context);
if (ret == 0) {
/* if no information was returned, give userspace an empty
* string */
ret = 1;
if (buffer && buflen > 0 &&
copy_to_user(buffer, "", 1) != 0)
ret = -EFAULT;
} else if (ret > 0) {
/* return as much data as there's room for */
if (buffer && buflen > 0) {
if (buflen > ret)
buflen = ret;
if (copy_to_user(buffer, context, buflen) != 0)
ret = -EFAULT;
}
kfree(context);
}
key_ref_put(key_ref);
return ret;
}
KEYS: Add a keyctl to install a process's session keyring on its parent [try #6] Add a keyctl to install a process's session keyring onto its parent. This replaces the parent's session keyring. Because the COW credential code does not permit one process to change another process's credentials directly, the change is deferred until userspace next starts executing again. Normally this will be after a wait*() syscall. To support this, three new security hooks have been provided: cred_alloc_blank() to allocate unset security creds, cred_transfer() to fill in the blank security creds and key_session_to_parent() - which asks the LSM if the process may replace its parent's session keyring. The replacement may only happen if the process has the same ownership details as its parent, and the process has LINK permission on the session keyring, and the session keyring is owned by the process, and the LSM permits it. Note that this requires alteration to each architecture's notify_resume path. This has been done for all arches barring blackfin, m68k* and xtensa, all of which need assembly alteration to support TIF_NOTIFY_RESUME. This allows the replacement to be performed at the point the parent process resumes userspace execution. This allows the userspace AFS pioctl emulation to fully emulate newpag() and the VIOCSETTOK and VIOCSETTOK2 pioctls, all of which require the ability to alter the parent process's PAG membership. However, since kAFS doesn't use PAGs per se, but rather dumps the keys into the session keyring, the session keyring of the parent must be replaced if, for example, VIOCSETTOK is passed the newpag flag. This can be tested with the following program: #include <stdio.h> #include <stdlib.h> #include <keyutils.h> #define KEYCTL_SESSION_TO_PARENT 18 #define OSERROR(X, S) do { if ((long)(X) == -1) { perror(S); exit(1); } } while(0) int main(int argc, char **argv) { key_serial_t keyring, key; long ret; keyring = keyctl_join_session_keyring(argv[1]); OSERROR(keyring, "keyctl_join_session_keyring"); key = add_key("user", "a", "b", 1, keyring); OSERROR(key, "add_key"); ret = keyctl(KEYCTL_SESSION_TO_PARENT); OSERROR(ret, "KEYCTL_SESSION_TO_PARENT"); return 0; } Compiled and linked with -lkeyutils, you should see something like: [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: _ses 355907932 --alswrv 4043 -1 \_ keyring: _uid.4043 [dhowells@andromeda ~]$ /tmp/newpag [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: _ses 1055658746 --alswrv 4043 4043 \_ user: a [dhowells@andromeda ~]$ /tmp/newpag hello [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: hello 340417692 --alswrv 4043 4043 \_ user: a Where the test program creates a new session keyring, sticks a user key named 'a' into it and then installs it on its parent. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-09-02 02:14:21 -06:00
/*
* Attempt to install the calling process's session keyring on the process's
* parent process.
*
keys: Replace uid/gid/perm permissions checking with an ACL Replace the uid/gid/perm permissions checking on a key with an ACL to allow the SETATTR and SEARCH permissions to be split. This will also allow a greater range of subjects to represented. ============ WHY DO THIS? ============ The problem is that SETATTR and SEARCH cover a slew of actions, not all of which should be grouped together. For SETATTR, this includes actions that are about controlling access to a key: (1) Changing a key's ownership. (2) Changing a key's security information. (3) Setting a keyring's restriction. And actions that are about managing a key's lifetime: (4) Setting an expiry time. (5) Revoking a key. and (proposed) managing a key as part of a cache: (6) Invalidating a key. Managing a key's lifetime doesn't really have anything to do with controlling access to that key. Expiry time is awkward since it's more about the lifetime of the content and so, in some ways goes better with WRITE permission. It can, however, be set unconditionally by a process with an appropriate authorisation token for instantiating a key, and can also be set by the key type driver when a key is instantiated, so lumping it with the access-controlling actions is probably okay. As for SEARCH permission, that currently covers: (1) Finding keys in a keyring tree during a search. (2) Permitting keyrings to be joined. (3) Invalidation. But these don't really belong together either, since these actions really need to be controlled separately. Finally, there are number of special cases to do with granting the administrator special rights to invalidate or clear keys that I would like to handle with the ACL rather than key flags and special checks. =============== WHAT IS CHANGED =============== The SETATTR permission is split to create two new permissions: (1) SET_SECURITY - which allows the key's owner, group and ACL to be changed and a restriction to be placed on a keyring. (2) REVOKE - which allows a key to be revoked. The SEARCH permission is split to create: (1) SEARCH - which allows a keyring to be search and a key to be found. (2) JOIN - which allows a keyring to be joined as a session keyring. (3) INVAL - which allows a key to be invalidated. The WRITE permission is also split to create: (1) WRITE - which allows a key's content to be altered and links to be added, removed and replaced in a keyring. (2) CLEAR - which allows a keyring to be cleared completely. This is split out to make it possible to give just this to an administrator. (3) REVOKE - see above. Keys acquire ACLs which consist of a series of ACEs, and all that apply are unioned together. An ACE specifies a subject, such as: (*) Possessor - permitted to anyone who 'possesses' a key (*) Owner - permitted to the key owner (*) Group - permitted to the key group (*) Everyone - permitted to everyone Note that 'Other' has been replaced with 'Everyone' on the assumption that you wouldn't grant a permit to 'Other' that you wouldn't also grant to everyone else. Further subjects may be made available by later patches. The ACE also specifies a permissions mask. The set of permissions is now: VIEW Can view the key metadata READ Can read the key content WRITE Can update/modify the key content SEARCH Can find the key by searching/requesting LINK Can make a link to the key SET_SECURITY Can change owner, ACL, expiry INVAL Can invalidate REVOKE Can revoke JOIN Can join this keyring CLEAR Can clear this keyring The KEYCTL_SETPERM function is then deprecated. The KEYCTL_SET_TIMEOUT function then is permitted if SET_SECURITY is set, or if the caller has a valid instantiation auth token. The KEYCTL_INVALIDATE function then requires INVAL. The KEYCTL_REVOKE function then requires REVOKE. The KEYCTL_JOIN_SESSION_KEYRING function then requires JOIN to join an existing keyring. The JOIN permission is enabled by default for session keyrings and manually created keyrings only. ====================== BACKWARD COMPATIBILITY ====================== To maintain backward compatibility, KEYCTL_SETPERM will translate the permissions mask it is given into a new ACL for a key - unless KEYCTL_SET_ACL has been called on that key, in which case an error will be returned. It will convert possessor, owner, group and other permissions into separate ACEs, if each portion of the mask is non-zero. SETATTR permission turns on all of INVAL, REVOKE and SET_SECURITY. WRITE permission turns on WRITE, REVOKE and, if a keyring, CLEAR. JOIN is turned on if a keyring is being altered. The KEYCTL_DESCRIBE function translates the ACL back into a permissions mask to return depending on possessor, owner, group and everyone ACEs. It will make the following mappings: (1) INVAL, JOIN -> SEARCH (2) SET_SECURITY -> SETATTR (3) REVOKE -> WRITE if SETATTR isn't already set (4) CLEAR -> WRITE Note that the value subsequently returned by KEYCTL_DESCRIBE may not match the value set with KEYCTL_SETATTR. ======= TESTING ======= This passes the keyutils testsuite for all but a couple of tests: (1) tests/keyctl/dh_compute/badargs: The first wrong-key-type test now returns EOPNOTSUPP rather than ENOKEY as READ permission isn't removed if the type doesn't have ->read(). You still can't actually read the key. (2) tests/keyctl/permitting/valid: The view-other-permissions test doesn't work as Other has been replaced with Everyone in the ACL. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-27 16:03:07 -06:00
* The keyring must exist and must grant the caller JOIN permission, and the
* parent process must be single-threaded and must have the same effective
* ownership as this process and mustn't be SUID/SGID.
*
* The keyring will be emplaced on the parent when it next resumes userspace.
*
* If successful, 0 will be returned.
KEYS: Add a keyctl to install a process's session keyring on its parent [try #6] Add a keyctl to install a process's session keyring onto its parent. This replaces the parent's session keyring. Because the COW credential code does not permit one process to change another process's credentials directly, the change is deferred until userspace next starts executing again. Normally this will be after a wait*() syscall. To support this, three new security hooks have been provided: cred_alloc_blank() to allocate unset security creds, cred_transfer() to fill in the blank security creds and key_session_to_parent() - which asks the LSM if the process may replace its parent's session keyring. The replacement may only happen if the process has the same ownership details as its parent, and the process has LINK permission on the session keyring, and the session keyring is owned by the process, and the LSM permits it. Note that this requires alteration to each architecture's notify_resume path. This has been done for all arches barring blackfin, m68k* and xtensa, all of which need assembly alteration to support TIF_NOTIFY_RESUME. This allows the replacement to be performed at the point the parent process resumes userspace execution. This allows the userspace AFS pioctl emulation to fully emulate newpag() and the VIOCSETTOK and VIOCSETTOK2 pioctls, all of which require the ability to alter the parent process's PAG membership. However, since kAFS doesn't use PAGs per se, but rather dumps the keys into the session keyring, the session keyring of the parent must be replaced if, for example, VIOCSETTOK is passed the newpag flag. This can be tested with the following program: #include <stdio.h> #include <stdlib.h> #include <keyutils.h> #define KEYCTL_SESSION_TO_PARENT 18 #define OSERROR(X, S) do { if ((long)(X) == -1) { perror(S); exit(1); } } while(0) int main(int argc, char **argv) { key_serial_t keyring, key; long ret; keyring = keyctl_join_session_keyring(argv[1]); OSERROR(keyring, "keyctl_join_session_keyring"); key = add_key("user", "a", "b", 1, keyring); OSERROR(key, "add_key"); ret = keyctl(KEYCTL_SESSION_TO_PARENT); OSERROR(ret, "KEYCTL_SESSION_TO_PARENT"); return 0; } Compiled and linked with -lkeyutils, you should see something like: [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: _ses 355907932 --alswrv 4043 -1 \_ keyring: _uid.4043 [dhowells@andromeda ~]$ /tmp/newpag [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: _ses 1055658746 --alswrv 4043 4043 \_ user: a [dhowells@andromeda ~]$ /tmp/newpag hello [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: hello 340417692 --alswrv 4043 4043 \_ user: a Where the test program creates a new session keyring, sticks a user key named 'a' into it and then installs it on its parent. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-09-02 02:14:21 -06:00
*/
long keyctl_session_to_parent(void)
{
struct task_struct *me, *parent;
const struct cred *mycred, *pcred;
struct callback_head *newwork, *oldwork;
KEYS: Add a keyctl to install a process's session keyring on its parent [try #6] Add a keyctl to install a process's session keyring onto its parent. This replaces the parent's session keyring. Because the COW credential code does not permit one process to change another process's credentials directly, the change is deferred until userspace next starts executing again. Normally this will be after a wait*() syscall. To support this, three new security hooks have been provided: cred_alloc_blank() to allocate unset security creds, cred_transfer() to fill in the blank security creds and key_session_to_parent() - which asks the LSM if the process may replace its parent's session keyring. The replacement may only happen if the process has the same ownership details as its parent, and the process has LINK permission on the session keyring, and the session keyring is owned by the process, and the LSM permits it. Note that this requires alteration to each architecture's notify_resume path. This has been done for all arches barring blackfin, m68k* and xtensa, all of which need assembly alteration to support TIF_NOTIFY_RESUME. This allows the replacement to be performed at the point the parent process resumes userspace execution. This allows the userspace AFS pioctl emulation to fully emulate newpag() and the VIOCSETTOK and VIOCSETTOK2 pioctls, all of which require the ability to alter the parent process's PAG membership. However, since kAFS doesn't use PAGs per se, but rather dumps the keys into the session keyring, the session keyring of the parent must be replaced if, for example, VIOCSETTOK is passed the newpag flag. This can be tested with the following program: #include <stdio.h> #include <stdlib.h> #include <keyutils.h> #define KEYCTL_SESSION_TO_PARENT 18 #define OSERROR(X, S) do { if ((long)(X) == -1) { perror(S); exit(1); } } while(0) int main(int argc, char **argv) { key_serial_t keyring, key; long ret; keyring = keyctl_join_session_keyring(argv[1]); OSERROR(keyring, "keyctl_join_session_keyring"); key = add_key("user", "a", "b", 1, keyring); OSERROR(key, "add_key"); ret = keyctl(KEYCTL_SESSION_TO_PARENT); OSERROR(ret, "KEYCTL_SESSION_TO_PARENT"); return 0; } Compiled and linked with -lkeyutils, you should see something like: [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: _ses 355907932 --alswrv 4043 -1 \_ keyring: _uid.4043 [dhowells@andromeda ~]$ /tmp/newpag [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: _ses 1055658746 --alswrv 4043 4043 \_ user: a [dhowells@andromeda ~]$ /tmp/newpag hello [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: hello 340417692 --alswrv 4043 4043 \_ user: a Where the test program creates a new session keyring, sticks a user key named 'a' into it and then installs it on its parent. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-09-02 02:14:21 -06:00
key_ref_t keyring_r;
struct cred *cred;
KEYS: Add a keyctl to install a process's session keyring on its parent [try #6] Add a keyctl to install a process's session keyring onto its parent. This replaces the parent's session keyring. Because the COW credential code does not permit one process to change another process's credentials directly, the change is deferred until userspace next starts executing again. Normally this will be after a wait*() syscall. To support this, three new security hooks have been provided: cred_alloc_blank() to allocate unset security creds, cred_transfer() to fill in the blank security creds and key_session_to_parent() - which asks the LSM if the process may replace its parent's session keyring. The replacement may only happen if the process has the same ownership details as its parent, and the process has LINK permission on the session keyring, and the session keyring is owned by the process, and the LSM permits it. Note that this requires alteration to each architecture's notify_resume path. This has been done for all arches barring blackfin, m68k* and xtensa, all of which need assembly alteration to support TIF_NOTIFY_RESUME. This allows the replacement to be performed at the point the parent process resumes userspace execution. This allows the userspace AFS pioctl emulation to fully emulate newpag() and the VIOCSETTOK and VIOCSETTOK2 pioctls, all of which require the ability to alter the parent process's PAG membership. However, since kAFS doesn't use PAGs per se, but rather dumps the keys into the session keyring, the session keyring of the parent must be replaced if, for example, VIOCSETTOK is passed the newpag flag. This can be tested with the following program: #include <stdio.h> #include <stdlib.h> #include <keyutils.h> #define KEYCTL_SESSION_TO_PARENT 18 #define OSERROR(X, S) do { if ((long)(X) == -1) { perror(S); exit(1); } } while(0) int main(int argc, char **argv) { key_serial_t keyring, key; long ret; keyring = keyctl_join_session_keyring(argv[1]); OSERROR(keyring, "keyctl_join_session_keyring"); key = add_key("user", "a", "b", 1, keyring); OSERROR(key, "add_key"); ret = keyctl(KEYCTL_SESSION_TO_PARENT); OSERROR(ret, "KEYCTL_SESSION_TO_PARENT"); return 0; } Compiled and linked with -lkeyutils, you should see something like: [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: _ses 355907932 --alswrv 4043 -1 \_ keyring: _uid.4043 [dhowells@andromeda ~]$ /tmp/newpag [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: _ses 1055658746 --alswrv 4043 4043 \_ user: a [dhowells@andromeda ~]$ /tmp/newpag hello [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: hello 340417692 --alswrv 4043 4043 \_ user: a Where the test program creates a new session keyring, sticks a user key named 'a' into it and then installs it on its parent. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-09-02 02:14:21 -06:00
int ret;
keys: Replace uid/gid/perm permissions checking with an ACL Replace the uid/gid/perm permissions checking on a key with an ACL to allow the SETATTR and SEARCH permissions to be split. This will also allow a greater range of subjects to represented. ============ WHY DO THIS? ============ The problem is that SETATTR and SEARCH cover a slew of actions, not all of which should be grouped together. For SETATTR, this includes actions that are about controlling access to a key: (1) Changing a key's ownership. (2) Changing a key's security information. (3) Setting a keyring's restriction. And actions that are about managing a key's lifetime: (4) Setting an expiry time. (5) Revoking a key. and (proposed) managing a key as part of a cache: (6) Invalidating a key. Managing a key's lifetime doesn't really have anything to do with controlling access to that key. Expiry time is awkward since it's more about the lifetime of the content and so, in some ways goes better with WRITE permission. It can, however, be set unconditionally by a process with an appropriate authorisation token for instantiating a key, and can also be set by the key type driver when a key is instantiated, so lumping it with the access-controlling actions is probably okay. As for SEARCH permission, that currently covers: (1) Finding keys in a keyring tree during a search. (2) Permitting keyrings to be joined. (3) Invalidation. But these don't really belong together either, since these actions really need to be controlled separately. Finally, there are number of special cases to do with granting the administrator special rights to invalidate or clear keys that I would like to handle with the ACL rather than key flags and special checks. =============== WHAT IS CHANGED =============== The SETATTR permission is split to create two new permissions: (1) SET_SECURITY - which allows the key's owner, group and ACL to be changed and a restriction to be placed on a keyring. (2) REVOKE - which allows a key to be revoked. The SEARCH permission is split to create: (1) SEARCH - which allows a keyring to be search and a key to be found. (2) JOIN - which allows a keyring to be joined as a session keyring. (3) INVAL - which allows a key to be invalidated. The WRITE permission is also split to create: (1) WRITE - which allows a key's content to be altered and links to be added, removed and replaced in a keyring. (2) CLEAR - which allows a keyring to be cleared completely. This is split out to make it possible to give just this to an administrator. (3) REVOKE - see above. Keys acquire ACLs which consist of a series of ACEs, and all that apply are unioned together. An ACE specifies a subject, such as: (*) Possessor - permitted to anyone who 'possesses' a key (*) Owner - permitted to the key owner (*) Group - permitted to the key group (*) Everyone - permitted to everyone Note that 'Other' has been replaced with 'Everyone' on the assumption that you wouldn't grant a permit to 'Other' that you wouldn't also grant to everyone else. Further subjects may be made available by later patches. The ACE also specifies a permissions mask. The set of permissions is now: VIEW Can view the key metadata READ Can read the key content WRITE Can update/modify the key content SEARCH Can find the key by searching/requesting LINK Can make a link to the key SET_SECURITY Can change owner, ACL, expiry INVAL Can invalidate REVOKE Can revoke JOIN Can join this keyring CLEAR Can clear this keyring The KEYCTL_SETPERM function is then deprecated. The KEYCTL_SET_TIMEOUT function then is permitted if SET_SECURITY is set, or if the caller has a valid instantiation auth token. The KEYCTL_INVALIDATE function then requires INVAL. The KEYCTL_REVOKE function then requires REVOKE. The KEYCTL_JOIN_SESSION_KEYRING function then requires JOIN to join an existing keyring. The JOIN permission is enabled by default for session keyrings and manually created keyrings only. ====================== BACKWARD COMPATIBILITY ====================== To maintain backward compatibility, KEYCTL_SETPERM will translate the permissions mask it is given into a new ACL for a key - unless KEYCTL_SET_ACL has been called on that key, in which case an error will be returned. It will convert possessor, owner, group and other permissions into separate ACEs, if each portion of the mask is non-zero. SETATTR permission turns on all of INVAL, REVOKE and SET_SECURITY. WRITE permission turns on WRITE, REVOKE and, if a keyring, CLEAR. JOIN is turned on if a keyring is being altered. The KEYCTL_DESCRIBE function translates the ACL back into a permissions mask to return depending on possessor, owner, group and everyone ACEs. It will make the following mappings: (1) INVAL, JOIN -> SEARCH (2) SET_SECURITY -> SETATTR (3) REVOKE -> WRITE if SETATTR isn't already set (4) CLEAR -> WRITE Note that the value subsequently returned by KEYCTL_DESCRIBE may not match the value set with KEYCTL_SETATTR. ======= TESTING ======= This passes the keyutils testsuite for all but a couple of tests: (1) tests/keyctl/dh_compute/badargs: The first wrong-key-type test now returns EOPNOTSUPP rather than ENOKEY as READ permission isn't removed if the type doesn't have ->read(). You still can't actually read the key. (2) tests/keyctl/permitting/valid: The view-other-permissions test doesn't work as Other has been replaced with Everyone in the ACL. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-27 16:03:07 -06:00
keyring_r = lookup_user_key(KEY_SPEC_SESSION_KEYRING, 0, KEY_NEED_JOIN);
KEYS: Add a keyctl to install a process's session keyring on its parent [try #6] Add a keyctl to install a process's session keyring onto its parent. This replaces the parent's session keyring. Because the COW credential code does not permit one process to change another process's credentials directly, the change is deferred until userspace next starts executing again. Normally this will be after a wait*() syscall. To support this, three new security hooks have been provided: cred_alloc_blank() to allocate unset security creds, cred_transfer() to fill in the blank security creds and key_session_to_parent() - which asks the LSM if the process may replace its parent's session keyring. The replacement may only happen if the process has the same ownership details as its parent, and the process has LINK permission on the session keyring, and the session keyring is owned by the process, and the LSM permits it. Note that this requires alteration to each architecture's notify_resume path. This has been done for all arches barring blackfin, m68k* and xtensa, all of which need assembly alteration to support TIF_NOTIFY_RESUME. This allows the replacement to be performed at the point the parent process resumes userspace execution. This allows the userspace AFS pioctl emulation to fully emulate newpag() and the VIOCSETTOK and VIOCSETTOK2 pioctls, all of which require the ability to alter the parent process's PAG membership. However, since kAFS doesn't use PAGs per se, but rather dumps the keys into the session keyring, the session keyring of the parent must be replaced if, for example, VIOCSETTOK is passed the newpag flag. This can be tested with the following program: #include <stdio.h> #include <stdlib.h> #include <keyutils.h> #define KEYCTL_SESSION_TO_PARENT 18 #define OSERROR(X, S) do { if ((long)(X) == -1) { perror(S); exit(1); } } while(0) int main(int argc, char **argv) { key_serial_t keyring, key; long ret; keyring = keyctl_join_session_keyring(argv[1]); OSERROR(keyring, "keyctl_join_session_keyring"); key = add_key("user", "a", "b", 1, keyring); OSERROR(key, "add_key"); ret = keyctl(KEYCTL_SESSION_TO_PARENT); OSERROR(ret, "KEYCTL_SESSION_TO_PARENT"); return 0; } Compiled and linked with -lkeyutils, you should see something like: [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: _ses 355907932 --alswrv 4043 -1 \_ keyring: _uid.4043 [dhowells@andromeda ~]$ /tmp/newpag [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: _ses 1055658746 --alswrv 4043 4043 \_ user: a [dhowells@andromeda ~]$ /tmp/newpag hello [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: hello 340417692 --alswrv 4043 4043 \_ user: a Where the test program creates a new session keyring, sticks a user key named 'a' into it and then installs it on its parent. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-09-02 02:14:21 -06:00
if (IS_ERR(keyring_r))
return PTR_ERR(keyring_r);
ret = -ENOMEM;
KEYS: Add a keyctl to install a process's session keyring on its parent [try #6] Add a keyctl to install a process's session keyring onto its parent. This replaces the parent's session keyring. Because the COW credential code does not permit one process to change another process's credentials directly, the change is deferred until userspace next starts executing again. Normally this will be after a wait*() syscall. To support this, three new security hooks have been provided: cred_alloc_blank() to allocate unset security creds, cred_transfer() to fill in the blank security creds and key_session_to_parent() - which asks the LSM if the process may replace its parent's session keyring. The replacement may only happen if the process has the same ownership details as its parent, and the process has LINK permission on the session keyring, and the session keyring is owned by the process, and the LSM permits it. Note that this requires alteration to each architecture's notify_resume path. This has been done for all arches barring blackfin, m68k* and xtensa, all of which need assembly alteration to support TIF_NOTIFY_RESUME. This allows the replacement to be performed at the point the parent process resumes userspace execution. This allows the userspace AFS pioctl emulation to fully emulate newpag() and the VIOCSETTOK and VIOCSETTOK2 pioctls, all of which require the ability to alter the parent process's PAG membership. However, since kAFS doesn't use PAGs per se, but rather dumps the keys into the session keyring, the session keyring of the parent must be replaced if, for example, VIOCSETTOK is passed the newpag flag. This can be tested with the following program: #include <stdio.h> #include <stdlib.h> #include <keyutils.h> #define KEYCTL_SESSION_TO_PARENT 18 #define OSERROR(X, S) do { if ((long)(X) == -1) { perror(S); exit(1); } } while(0) int main(int argc, char **argv) { key_serial_t keyring, key; long ret; keyring = keyctl_join_session_keyring(argv[1]); OSERROR(keyring, "keyctl_join_session_keyring"); key = add_key("user", "a", "b", 1, keyring); OSERROR(key, "add_key"); ret = keyctl(KEYCTL_SESSION_TO_PARENT); OSERROR(ret, "KEYCTL_SESSION_TO_PARENT"); return 0; } Compiled and linked with -lkeyutils, you should see something like: [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: _ses 355907932 --alswrv 4043 -1 \_ keyring: _uid.4043 [dhowells@andromeda ~]$ /tmp/newpag [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: _ses 1055658746 --alswrv 4043 4043 \_ user: a [dhowells@andromeda ~]$ /tmp/newpag hello [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: hello 340417692 --alswrv 4043 4043 \_ user: a Where the test program creates a new session keyring, sticks a user key named 'a' into it and then installs it on its parent. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-09-02 02:14:21 -06:00
/* our parent is going to need a new cred struct, a new tgcred struct
* and new security data, so we allocate them here to prevent ENOMEM in
* our parent */
cred = cred_alloc_blank();
if (!cred)
goto error_keyring;
newwork = &cred->rcu;
KEYS: Add a keyctl to install a process's session keyring on its parent [try #6] Add a keyctl to install a process's session keyring onto its parent. This replaces the parent's session keyring. Because the COW credential code does not permit one process to change another process's credentials directly, the change is deferred until userspace next starts executing again. Normally this will be after a wait*() syscall. To support this, three new security hooks have been provided: cred_alloc_blank() to allocate unset security creds, cred_transfer() to fill in the blank security creds and key_session_to_parent() - which asks the LSM if the process may replace its parent's session keyring. The replacement may only happen if the process has the same ownership details as its parent, and the process has LINK permission on the session keyring, and the session keyring is owned by the process, and the LSM permits it. Note that this requires alteration to each architecture's notify_resume path. This has been done for all arches barring blackfin, m68k* and xtensa, all of which need assembly alteration to support TIF_NOTIFY_RESUME. This allows the replacement to be performed at the point the parent process resumes userspace execution. This allows the userspace AFS pioctl emulation to fully emulate newpag() and the VIOCSETTOK and VIOCSETTOK2 pioctls, all of which require the ability to alter the parent process's PAG membership. However, since kAFS doesn't use PAGs per se, but rather dumps the keys into the session keyring, the session keyring of the parent must be replaced if, for example, VIOCSETTOK is passed the newpag flag. This can be tested with the following program: #include <stdio.h> #include <stdlib.h> #include <keyutils.h> #define KEYCTL_SESSION_TO_PARENT 18 #define OSERROR(X, S) do { if ((long)(X) == -1) { perror(S); exit(1); } } while(0) int main(int argc, char **argv) { key_serial_t keyring, key; long ret; keyring = keyctl_join_session_keyring(argv[1]); OSERROR(keyring, "keyctl_join_session_keyring"); key = add_key("user", "a", "b", 1, keyring); OSERROR(key, "add_key"); ret = keyctl(KEYCTL_SESSION_TO_PARENT); OSERROR(ret, "KEYCTL_SESSION_TO_PARENT"); return 0; } Compiled and linked with -lkeyutils, you should see something like: [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: _ses 355907932 --alswrv 4043 -1 \_ keyring: _uid.4043 [dhowells@andromeda ~]$ /tmp/newpag [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: _ses 1055658746 --alswrv 4043 4043 \_ user: a [dhowells@andromeda ~]$ /tmp/newpag hello [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: hello 340417692 --alswrv 4043 4043 \_ user: a Where the test program creates a new session keyring, sticks a user key named 'a' into it and then installs it on its parent. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-09-02 02:14:21 -06:00
KEYS: Make the session and process keyrings per-thread Make the session keyring per-thread rather than per-process, but still inherited from the parent thread to solve a problem with PAM and gdm. The problem is that join_session_keyring() will reject attempts to change the session keyring of a multithreaded program but gdm is now multithreaded before it gets to the point of starting PAM and running pam_keyinit to create the session keyring. See: https://bugs.freedesktop.org/show_bug.cgi?id=49211 The reason that join_session_keyring() will only change the session keyring under a single-threaded environment is that it's hard to alter the other thread's credentials to effect the change in a multi-threaded program. The problems are such as: (1) How to prevent two threads both running join_session_keyring() from racing. (2) Another thread's credentials may not be modified directly by this process. (3) The number of threads is uncertain whilst we're not holding the appropriate spinlock, making preallocation slightly tricky. (4) We could use TIF_NOTIFY_RESUME and key_replace_session_keyring() to get another thread to replace its keyring, but that means preallocating for each thread. A reasonable way around this is to make the session keyring per-thread rather than per-process and just document that if you want a common session keyring, you must get it before you spawn any threads - which is the current situation anyway. Whilst we're at it, we can the process keyring behave in the same way. This means we can clean up some of the ickyness in the creds code. Basically, after this patch, the session, process and thread keyrings are about inheritance rules only and not about sharing changes of keyring. Reported-by: Mantas M. <grawity@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Ray Strode <rstrode@redhat.com>
2012-10-02 12:24:29 -06:00
cred->session_keyring = key_ref_to_ptr(keyring_r);
keyring_r = NULL;
init_task_work(newwork, key_change_session_keyring);
KEYS: Add a keyctl to install a process's session keyring on its parent [try #6] Add a keyctl to install a process's session keyring onto its parent. This replaces the parent's session keyring. Because the COW credential code does not permit one process to change another process's credentials directly, the change is deferred until userspace next starts executing again. Normally this will be after a wait*() syscall. To support this, three new security hooks have been provided: cred_alloc_blank() to allocate unset security creds, cred_transfer() to fill in the blank security creds and key_session_to_parent() - which asks the LSM if the process may replace its parent's session keyring. The replacement may only happen if the process has the same ownership details as its parent, and the process has LINK permission on the session keyring, and the session keyring is owned by the process, and the LSM permits it. Note that this requires alteration to each architecture's notify_resume path. This has been done for all arches barring blackfin, m68k* and xtensa, all of which need assembly alteration to support TIF_NOTIFY_RESUME. This allows the replacement to be performed at the point the parent process resumes userspace execution. This allows the userspace AFS pioctl emulation to fully emulate newpag() and the VIOCSETTOK and VIOCSETTOK2 pioctls, all of which require the ability to alter the parent process's PAG membership. However, since kAFS doesn't use PAGs per se, but rather dumps the keys into the session keyring, the session keyring of the parent must be replaced if, for example, VIOCSETTOK is passed the newpag flag. This can be tested with the following program: #include <stdio.h> #include <stdlib.h> #include <keyutils.h> #define KEYCTL_SESSION_TO_PARENT 18 #define OSERROR(X, S) do { if ((long)(X) == -1) { perror(S); exit(1); } } while(0) int main(int argc, char **argv) { key_serial_t keyring, key; long ret; keyring = keyctl_join_session_keyring(argv[1]); OSERROR(keyring, "keyctl_join_session_keyring"); key = add_key("user", "a", "b", 1, keyring); OSERROR(key, "add_key"); ret = keyctl(KEYCTL_SESSION_TO_PARENT); OSERROR(ret, "KEYCTL_SESSION_TO_PARENT"); return 0; } Compiled and linked with -lkeyutils, you should see something like: [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: _ses 355907932 --alswrv 4043 -1 \_ keyring: _uid.4043 [dhowells@andromeda ~]$ /tmp/newpag [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: _ses 1055658746 --alswrv 4043 4043 \_ user: a [dhowells@andromeda ~]$ /tmp/newpag hello [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: hello 340417692 --alswrv 4043 4043 \_ user: a Where the test program creates a new session keyring, sticks a user key named 'a' into it and then installs it on its parent. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-09-02 02:14:21 -06:00
me = current;
rcu_read_lock();
KEYS: Add a keyctl to install a process's session keyring on its parent [try #6] Add a keyctl to install a process's session keyring onto its parent. This replaces the parent's session keyring. Because the COW credential code does not permit one process to change another process's credentials directly, the change is deferred until userspace next starts executing again. Normally this will be after a wait*() syscall. To support this, three new security hooks have been provided: cred_alloc_blank() to allocate unset security creds, cred_transfer() to fill in the blank security creds and key_session_to_parent() - which asks the LSM if the process may replace its parent's session keyring. The replacement may only happen if the process has the same ownership details as its parent, and the process has LINK permission on the session keyring, and the session keyring is owned by the process, and the LSM permits it. Note that this requires alteration to each architecture's notify_resume path. This has been done for all arches barring blackfin, m68k* and xtensa, all of which need assembly alteration to support TIF_NOTIFY_RESUME. This allows the replacement to be performed at the point the parent process resumes userspace execution. This allows the userspace AFS pioctl emulation to fully emulate newpag() and the VIOCSETTOK and VIOCSETTOK2 pioctls, all of which require the ability to alter the parent process's PAG membership. However, since kAFS doesn't use PAGs per se, but rather dumps the keys into the session keyring, the session keyring of the parent must be replaced if, for example, VIOCSETTOK is passed the newpag flag. This can be tested with the following program: #include <stdio.h> #include <stdlib.h> #include <keyutils.h> #define KEYCTL_SESSION_TO_PARENT 18 #define OSERROR(X, S) do { if ((long)(X) == -1) { perror(S); exit(1); } } while(0) int main(int argc, char **argv) { key_serial_t keyring, key; long ret; keyring = keyctl_join_session_keyring(argv[1]); OSERROR(keyring, "keyctl_join_session_keyring"); key = add_key("user", "a", "b", 1, keyring); OSERROR(key, "add_key"); ret = keyctl(KEYCTL_SESSION_TO_PARENT); OSERROR(ret, "KEYCTL_SESSION_TO_PARENT"); return 0; } Compiled and linked with -lkeyutils, you should see something like: [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: _ses 355907932 --alswrv 4043 -1 \_ keyring: _uid.4043 [dhowells@andromeda ~]$ /tmp/newpag [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: _ses 1055658746 --alswrv 4043 4043 \_ user: a [dhowells@andromeda ~]$ /tmp/newpag hello [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: hello 340417692 --alswrv 4043 4043 \_ user: a Where the test program creates a new session keyring, sticks a user key named 'a' into it and then installs it on its parent. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-09-02 02:14:21 -06:00
write_lock_irq(&tasklist_lock);
ret = -EPERM;
oldwork = NULL;
parent = rcu_dereference_protected(me->real_parent,
lockdep_is_held(&tasklist_lock));
KEYS: Add a keyctl to install a process's session keyring on its parent [try #6] Add a keyctl to install a process's session keyring onto its parent. This replaces the parent's session keyring. Because the COW credential code does not permit one process to change another process's credentials directly, the change is deferred until userspace next starts executing again. Normally this will be after a wait*() syscall. To support this, three new security hooks have been provided: cred_alloc_blank() to allocate unset security creds, cred_transfer() to fill in the blank security creds and key_session_to_parent() - which asks the LSM if the process may replace its parent's session keyring. The replacement may only happen if the process has the same ownership details as its parent, and the process has LINK permission on the session keyring, and the session keyring is owned by the process, and the LSM permits it. Note that this requires alteration to each architecture's notify_resume path. This has been done for all arches barring blackfin, m68k* and xtensa, all of which need assembly alteration to support TIF_NOTIFY_RESUME. This allows the replacement to be performed at the point the parent process resumes userspace execution. This allows the userspace AFS pioctl emulation to fully emulate newpag() and the VIOCSETTOK and VIOCSETTOK2 pioctls, all of which require the ability to alter the parent process's PAG membership. However, since kAFS doesn't use PAGs per se, but rather dumps the keys into the session keyring, the session keyring of the parent must be replaced if, for example, VIOCSETTOK is passed the newpag flag. This can be tested with the following program: #include <stdio.h> #include <stdlib.h> #include <keyutils.h> #define KEYCTL_SESSION_TO_PARENT 18 #define OSERROR(X, S) do { if ((long)(X) == -1) { perror(S); exit(1); } } while(0) int main(int argc, char **argv) { key_serial_t keyring, key; long ret; keyring = keyctl_join_session_keyring(argv[1]); OSERROR(keyring, "keyctl_join_session_keyring"); key = add_key("user", "a", "b", 1, keyring); OSERROR(key, "add_key"); ret = keyctl(KEYCTL_SESSION_TO_PARENT); OSERROR(ret, "KEYCTL_SESSION_TO_PARENT"); return 0; } Compiled and linked with -lkeyutils, you should see something like: [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: _ses 355907932 --alswrv 4043 -1 \_ keyring: _uid.4043 [dhowells@andromeda ~]$ /tmp/newpag [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: _ses 1055658746 --alswrv 4043 4043 \_ user: a [dhowells@andromeda ~]$ /tmp/newpag hello [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: hello 340417692 --alswrv 4043 4043 \_ user: a Where the test program creates a new session keyring, sticks a user key named 'a' into it and then installs it on its parent. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-09-02 02:14:21 -06:00
/* the parent mustn't be init and mustn't be a kernel thread */
if (parent->pid <= 1 || !parent->mm)
goto unlock;
KEYS: Add a keyctl to install a process's session keyring on its parent [try #6] Add a keyctl to install a process's session keyring onto its parent. This replaces the parent's session keyring. Because the COW credential code does not permit one process to change another process's credentials directly, the change is deferred until userspace next starts executing again. Normally this will be after a wait*() syscall. To support this, three new security hooks have been provided: cred_alloc_blank() to allocate unset security creds, cred_transfer() to fill in the blank security creds and key_session_to_parent() - which asks the LSM if the process may replace its parent's session keyring. The replacement may only happen if the process has the same ownership details as its parent, and the process has LINK permission on the session keyring, and the session keyring is owned by the process, and the LSM permits it. Note that this requires alteration to each architecture's notify_resume path. This has been done for all arches barring blackfin, m68k* and xtensa, all of which need assembly alteration to support TIF_NOTIFY_RESUME. This allows the replacement to be performed at the point the parent process resumes userspace execution. This allows the userspace AFS pioctl emulation to fully emulate newpag() and the VIOCSETTOK and VIOCSETTOK2 pioctls, all of which require the ability to alter the parent process's PAG membership. However, since kAFS doesn't use PAGs per se, but rather dumps the keys into the session keyring, the session keyring of the parent must be replaced if, for example, VIOCSETTOK is passed the newpag flag. This can be tested with the following program: #include <stdio.h> #include <stdlib.h> #include <keyutils.h> #define KEYCTL_SESSION_TO_PARENT 18 #define OSERROR(X, S) do { if ((long)(X) == -1) { perror(S); exit(1); } } while(0) int main(int argc, char **argv) { key_serial_t keyring, key; long ret; keyring = keyctl_join_session_keyring(argv[1]); OSERROR(keyring, "keyctl_join_session_keyring"); key = add_key("user", "a", "b", 1, keyring); OSERROR(key, "add_key"); ret = keyctl(KEYCTL_SESSION_TO_PARENT); OSERROR(ret, "KEYCTL_SESSION_TO_PARENT"); return 0; } Compiled and linked with -lkeyutils, you should see something like: [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: _ses 355907932 --alswrv 4043 -1 \_ keyring: _uid.4043 [dhowells@andromeda ~]$ /tmp/newpag [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: _ses 1055658746 --alswrv 4043 4043 \_ user: a [dhowells@andromeda ~]$ /tmp/newpag hello [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: hello 340417692 --alswrv 4043 4043 \_ user: a Where the test program creates a new session keyring, sticks a user key named 'a' into it and then installs it on its parent. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-09-02 02:14:21 -06:00
/* the parent must be single threaded */
if (!thread_group_empty(parent))
goto unlock;
KEYS: Add a keyctl to install a process's session keyring on its parent [try #6] Add a keyctl to install a process's session keyring onto its parent. This replaces the parent's session keyring. Because the COW credential code does not permit one process to change another process's credentials directly, the change is deferred until userspace next starts executing again. Normally this will be after a wait*() syscall. To support this, three new security hooks have been provided: cred_alloc_blank() to allocate unset security creds, cred_transfer() to fill in the blank security creds and key_session_to_parent() - which asks the LSM if the process may replace its parent's session keyring. The replacement may only happen if the process has the same ownership details as its parent, and the process has LINK permission on the session keyring, and the session keyring is owned by the process, and the LSM permits it. Note that this requires alteration to each architecture's notify_resume path. This has been done for all arches barring blackfin, m68k* and xtensa, all of which need assembly alteration to support TIF_NOTIFY_RESUME. This allows the replacement to be performed at the point the parent process resumes userspace execution. This allows the userspace AFS pioctl emulation to fully emulate newpag() and the VIOCSETTOK and VIOCSETTOK2 pioctls, all of which require the ability to alter the parent process's PAG membership. However, since kAFS doesn't use PAGs per se, but rather dumps the keys into the session keyring, the session keyring of the parent must be replaced if, for example, VIOCSETTOK is passed the newpag flag. This can be tested with the following program: #include <stdio.h> #include <stdlib.h> #include <keyutils.h> #define KEYCTL_SESSION_TO_PARENT 18 #define OSERROR(X, S) do { if ((long)(X) == -1) { perror(S); exit(1); } } while(0) int main(int argc, char **argv) { key_serial_t keyring, key; long ret; keyring = keyctl_join_session_keyring(argv[1]); OSERROR(keyring, "keyctl_join_session_keyring"); key = add_key("user", "a", "b", 1, keyring); OSERROR(key, "add_key"); ret = keyctl(KEYCTL_SESSION_TO_PARENT); OSERROR(ret, "KEYCTL_SESSION_TO_PARENT"); return 0; } Compiled and linked with -lkeyutils, you should see something like: [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: _ses 355907932 --alswrv 4043 -1 \_ keyring: _uid.4043 [dhowells@andromeda ~]$ /tmp/newpag [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: _ses 1055658746 --alswrv 4043 4043 \_ user: a [dhowells@andromeda ~]$ /tmp/newpag hello [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: hello 340417692 --alswrv 4043 4043 \_ user: a Where the test program creates a new session keyring, sticks a user key named 'a' into it and then installs it on its parent. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-09-02 02:14:21 -06:00
/* the parent and the child must have different session keyrings or
* there's no point */
mycred = current_cred();
pcred = __task_cred(parent);
if (mycred == pcred ||
KEYS: Make the session and process keyrings per-thread Make the session keyring per-thread rather than per-process, but still inherited from the parent thread to solve a problem with PAM and gdm. The problem is that join_session_keyring() will reject attempts to change the session keyring of a multithreaded program but gdm is now multithreaded before it gets to the point of starting PAM and running pam_keyinit to create the session keyring. See: https://bugs.freedesktop.org/show_bug.cgi?id=49211 The reason that join_session_keyring() will only change the session keyring under a single-threaded environment is that it's hard to alter the other thread's credentials to effect the change in a multi-threaded program. The problems are such as: (1) How to prevent two threads both running join_session_keyring() from racing. (2) Another thread's credentials may not be modified directly by this process. (3) The number of threads is uncertain whilst we're not holding the appropriate spinlock, making preallocation slightly tricky. (4) We could use TIF_NOTIFY_RESUME and key_replace_session_keyring() to get another thread to replace its keyring, but that means preallocating for each thread. A reasonable way around this is to make the session keyring per-thread rather than per-process and just document that if you want a common session keyring, you must get it before you spawn any threads - which is the current situation anyway. Whilst we're at it, we can the process keyring behave in the same way. This means we can clean up some of the ickyness in the creds code. Basically, after this patch, the session, process and thread keyrings are about inheritance rules only and not about sharing changes of keyring. Reported-by: Mantas M. <grawity@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Ray Strode <rstrode@redhat.com>
2012-10-02 12:24:29 -06:00
mycred->session_keyring == pcred->session_keyring) {
ret = 0;
goto unlock;
}
KEYS: Add a keyctl to install a process's session keyring on its parent [try #6] Add a keyctl to install a process's session keyring onto its parent. This replaces the parent's session keyring. Because the COW credential code does not permit one process to change another process's credentials directly, the change is deferred until userspace next starts executing again. Normally this will be after a wait*() syscall. To support this, three new security hooks have been provided: cred_alloc_blank() to allocate unset security creds, cred_transfer() to fill in the blank security creds and key_session_to_parent() - which asks the LSM if the process may replace its parent's session keyring. The replacement may only happen if the process has the same ownership details as its parent, and the process has LINK permission on the session keyring, and the session keyring is owned by the process, and the LSM permits it. Note that this requires alteration to each architecture's notify_resume path. This has been done for all arches barring blackfin, m68k* and xtensa, all of which need assembly alteration to support TIF_NOTIFY_RESUME. This allows the replacement to be performed at the point the parent process resumes userspace execution. This allows the userspace AFS pioctl emulation to fully emulate newpag() and the VIOCSETTOK and VIOCSETTOK2 pioctls, all of which require the ability to alter the parent process's PAG membership. However, since kAFS doesn't use PAGs per se, but rather dumps the keys into the session keyring, the session keyring of the parent must be replaced if, for example, VIOCSETTOK is passed the newpag flag. This can be tested with the following program: #include <stdio.h> #include <stdlib.h> #include <keyutils.h> #define KEYCTL_SESSION_TO_PARENT 18 #define OSERROR(X, S) do { if ((long)(X) == -1) { perror(S); exit(1); } } while(0) int main(int argc, char **argv) { key_serial_t keyring, key; long ret; keyring = keyctl_join_session_keyring(argv[1]); OSERROR(keyring, "keyctl_join_session_keyring"); key = add_key("user", "a", "b", 1, keyring); OSERROR(key, "add_key"); ret = keyctl(KEYCTL_SESSION_TO_PARENT); OSERROR(ret, "KEYCTL_SESSION_TO_PARENT"); return 0; } Compiled and linked with -lkeyutils, you should see something like: [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: _ses 355907932 --alswrv 4043 -1 \_ keyring: _uid.4043 [dhowells@andromeda ~]$ /tmp/newpag [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: _ses 1055658746 --alswrv 4043 4043 \_ user: a [dhowells@andromeda ~]$ /tmp/newpag hello [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: hello 340417692 --alswrv 4043 4043 \_ user: a Where the test program creates a new session keyring, sticks a user key named 'a' into it and then installs it on its parent. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-09-02 02:14:21 -06:00
/* the parent must have the same effective ownership and mustn't be
* SUID/SGID */
if (!uid_eq(pcred->uid, mycred->euid) ||
!uid_eq(pcred->euid, mycred->euid) ||
!uid_eq(pcred->suid, mycred->euid) ||
!gid_eq(pcred->gid, mycred->egid) ||
!gid_eq(pcred->egid, mycred->egid) ||
!gid_eq(pcred->sgid, mycred->egid))
goto unlock;
KEYS: Add a keyctl to install a process's session keyring on its parent [try #6] Add a keyctl to install a process's session keyring onto its parent. This replaces the parent's session keyring. Because the COW credential code does not permit one process to change another process's credentials directly, the change is deferred until userspace next starts executing again. Normally this will be after a wait*() syscall. To support this, three new security hooks have been provided: cred_alloc_blank() to allocate unset security creds, cred_transfer() to fill in the blank security creds and key_session_to_parent() - which asks the LSM if the process may replace its parent's session keyring. The replacement may only happen if the process has the same ownership details as its parent, and the process has LINK permission on the session keyring, and the session keyring is owned by the process, and the LSM permits it. Note that this requires alteration to each architecture's notify_resume path. This has been done for all arches barring blackfin, m68k* and xtensa, all of which need assembly alteration to support TIF_NOTIFY_RESUME. This allows the replacement to be performed at the point the parent process resumes userspace execution. This allows the userspace AFS pioctl emulation to fully emulate newpag() and the VIOCSETTOK and VIOCSETTOK2 pioctls, all of which require the ability to alter the parent process's PAG membership. However, since kAFS doesn't use PAGs per se, but rather dumps the keys into the session keyring, the session keyring of the parent must be replaced if, for example, VIOCSETTOK is passed the newpag flag. This can be tested with the following program: #include <stdio.h> #include <stdlib.h> #include <keyutils.h> #define KEYCTL_SESSION_TO_PARENT 18 #define OSERROR(X, S) do { if ((long)(X) == -1) { perror(S); exit(1); } } while(0) int main(int argc, char **argv) { key_serial_t keyring, key; long ret; keyring = keyctl_join_session_keyring(argv[1]); OSERROR(keyring, "keyctl_join_session_keyring"); key = add_key("user", "a", "b", 1, keyring); OSERROR(key, "add_key"); ret = keyctl(KEYCTL_SESSION_TO_PARENT); OSERROR(ret, "KEYCTL_SESSION_TO_PARENT"); return 0; } Compiled and linked with -lkeyutils, you should see something like: [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: _ses 355907932 --alswrv 4043 -1 \_ keyring: _uid.4043 [dhowells@andromeda ~]$ /tmp/newpag [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: _ses 1055658746 --alswrv 4043 4043 \_ user: a [dhowells@andromeda ~]$ /tmp/newpag hello [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: hello 340417692 --alswrv 4043 4043 \_ user: a Where the test program creates a new session keyring, sticks a user key named 'a' into it and then installs it on its parent. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-09-02 02:14:21 -06:00
/* the keyrings must have the same UID */
KEYS: Make the session and process keyrings per-thread Make the session keyring per-thread rather than per-process, but still inherited from the parent thread to solve a problem with PAM and gdm. The problem is that join_session_keyring() will reject attempts to change the session keyring of a multithreaded program but gdm is now multithreaded before it gets to the point of starting PAM and running pam_keyinit to create the session keyring. See: https://bugs.freedesktop.org/show_bug.cgi?id=49211 The reason that join_session_keyring() will only change the session keyring under a single-threaded environment is that it's hard to alter the other thread's credentials to effect the change in a multi-threaded program. The problems are such as: (1) How to prevent two threads both running join_session_keyring() from racing. (2) Another thread's credentials may not be modified directly by this process. (3) The number of threads is uncertain whilst we're not holding the appropriate spinlock, making preallocation slightly tricky. (4) We could use TIF_NOTIFY_RESUME and key_replace_session_keyring() to get another thread to replace its keyring, but that means preallocating for each thread. A reasonable way around this is to make the session keyring per-thread rather than per-process and just document that if you want a common session keyring, you must get it before you spawn any threads - which is the current situation anyway. Whilst we're at it, we can the process keyring behave in the same way. This means we can clean up some of the ickyness in the creds code. Basically, after this patch, the session, process and thread keyrings are about inheritance rules only and not about sharing changes of keyring. Reported-by: Mantas M. <grawity@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Ray Strode <rstrode@redhat.com>
2012-10-02 12:24:29 -06:00
if ((pcred->session_keyring &&
!uid_eq(pcred->session_keyring->uid, mycred->euid)) ||
!uid_eq(mycred->session_keyring->uid, mycred->euid))
goto unlock;
KEYS: Add a keyctl to install a process's session keyring on its parent [try #6] Add a keyctl to install a process's session keyring onto its parent. This replaces the parent's session keyring. Because the COW credential code does not permit one process to change another process's credentials directly, the change is deferred until userspace next starts executing again. Normally this will be after a wait*() syscall. To support this, three new security hooks have been provided: cred_alloc_blank() to allocate unset security creds, cred_transfer() to fill in the blank security creds and key_session_to_parent() - which asks the LSM if the process may replace its parent's session keyring. The replacement may only happen if the process has the same ownership details as its parent, and the process has LINK permission on the session keyring, and the session keyring is owned by the process, and the LSM permits it. Note that this requires alteration to each architecture's notify_resume path. This has been done for all arches barring blackfin, m68k* and xtensa, all of which need assembly alteration to support TIF_NOTIFY_RESUME. This allows the replacement to be performed at the point the parent process resumes userspace execution. This allows the userspace AFS pioctl emulation to fully emulate newpag() and the VIOCSETTOK and VIOCSETTOK2 pioctls, all of which require the ability to alter the parent process's PAG membership. However, since kAFS doesn't use PAGs per se, but rather dumps the keys into the session keyring, the session keyring of the parent must be replaced if, for example, VIOCSETTOK is passed the newpag flag. This can be tested with the following program: #include <stdio.h> #include <stdlib.h> #include <keyutils.h> #define KEYCTL_SESSION_TO_PARENT 18 #define OSERROR(X, S) do { if ((long)(X) == -1) { perror(S); exit(1); } } while(0) int main(int argc, char **argv) { key_serial_t keyring, key; long ret; keyring = keyctl_join_session_keyring(argv[1]); OSERROR(keyring, "keyctl_join_session_keyring"); key = add_key("user", "a", "b", 1, keyring); OSERROR(key, "add_key"); ret = keyctl(KEYCTL_SESSION_TO_PARENT); OSERROR(ret, "KEYCTL_SESSION_TO_PARENT"); return 0; } Compiled and linked with -lkeyutils, you should see something like: [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: _ses 355907932 --alswrv 4043 -1 \_ keyring: _uid.4043 [dhowells@andromeda ~]$ /tmp/newpag [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: _ses 1055658746 --alswrv 4043 4043 \_ user: a [dhowells@andromeda ~]$ /tmp/newpag hello [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: hello 340417692 --alswrv 4043 4043 \_ user: a Where the test program creates a new session keyring, sticks a user key named 'a' into it and then installs it on its parent. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-09-02 02:14:21 -06:00
/* cancel an already pending keyring replacement */
oldwork = task_work_cancel(parent, key_change_session_keyring);
KEYS: Add a keyctl to install a process's session keyring on its parent [try #6] Add a keyctl to install a process's session keyring onto its parent. This replaces the parent's session keyring. Because the COW credential code does not permit one process to change another process's credentials directly, the change is deferred until userspace next starts executing again. Normally this will be after a wait*() syscall. To support this, three new security hooks have been provided: cred_alloc_blank() to allocate unset security creds, cred_transfer() to fill in the blank security creds and key_session_to_parent() - which asks the LSM if the process may replace its parent's session keyring. The replacement may only happen if the process has the same ownership details as its parent, and the process has LINK permission on the session keyring, and the session keyring is owned by the process, and the LSM permits it. Note that this requires alteration to each architecture's notify_resume path. This has been done for all arches barring blackfin, m68k* and xtensa, all of which need assembly alteration to support TIF_NOTIFY_RESUME. This allows the replacement to be performed at the point the parent process resumes userspace execution. This allows the userspace AFS pioctl emulation to fully emulate newpag() and the VIOCSETTOK and VIOCSETTOK2 pioctls, all of which require the ability to alter the parent process's PAG membership. However, since kAFS doesn't use PAGs per se, but rather dumps the keys into the session keyring, the session keyring of the parent must be replaced if, for example, VIOCSETTOK is passed the newpag flag. This can be tested with the following program: #include <stdio.h> #include <stdlib.h> #include <keyutils.h> #define KEYCTL_SESSION_TO_PARENT 18 #define OSERROR(X, S) do { if ((long)(X) == -1) { perror(S); exit(1); } } while(0) int main(int argc, char **argv) { key_serial_t keyring, key; long ret; keyring = keyctl_join_session_keyring(argv[1]); OSERROR(keyring, "keyctl_join_session_keyring"); key = add_key("user", "a", "b", 1, keyring); OSERROR(key, "add_key"); ret = keyctl(KEYCTL_SESSION_TO_PARENT); OSERROR(ret, "KEYCTL_SESSION_TO_PARENT"); return 0; } Compiled and linked with -lkeyutils, you should see something like: [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: _ses 355907932 --alswrv 4043 -1 \_ keyring: _uid.4043 [dhowells@andromeda ~]$ /tmp/newpag [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: _ses 1055658746 --alswrv 4043 4043 \_ user: a [dhowells@andromeda ~]$ /tmp/newpag hello [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: hello 340417692 --alswrv 4043 4043 \_ user: a Where the test program creates a new session keyring, sticks a user key named 'a' into it and then installs it on its parent. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-09-02 02:14:21 -06:00
/* the replacement session keyring is applied just prior to userspace
* restarting */
ret = task_work_add(parent, newwork, true);
if (!ret)
newwork = NULL;
unlock:
KEYS: Add a keyctl to install a process's session keyring on its parent [try #6] Add a keyctl to install a process's session keyring onto its parent. This replaces the parent's session keyring. Because the COW credential code does not permit one process to change another process's credentials directly, the change is deferred until userspace next starts executing again. Normally this will be after a wait*() syscall. To support this, three new security hooks have been provided: cred_alloc_blank() to allocate unset security creds, cred_transfer() to fill in the blank security creds and key_session_to_parent() - which asks the LSM if the process may replace its parent's session keyring. The replacement may only happen if the process has the same ownership details as its parent, and the process has LINK permission on the session keyring, and the session keyring is owned by the process, and the LSM permits it. Note that this requires alteration to each architecture's notify_resume path. This has been done for all arches barring blackfin, m68k* and xtensa, all of which need assembly alteration to support TIF_NOTIFY_RESUME. This allows the replacement to be performed at the point the parent process resumes userspace execution. This allows the userspace AFS pioctl emulation to fully emulate newpag() and the VIOCSETTOK and VIOCSETTOK2 pioctls, all of which require the ability to alter the parent process's PAG membership. However, since kAFS doesn't use PAGs per se, but rather dumps the keys into the session keyring, the session keyring of the parent must be replaced if, for example, VIOCSETTOK is passed the newpag flag. This can be tested with the following program: #include <stdio.h> #include <stdlib.h> #include <keyutils.h> #define KEYCTL_SESSION_TO_PARENT 18 #define OSERROR(X, S) do { if ((long)(X) == -1) { perror(S); exit(1); } } while(0) int main(int argc, char **argv) { key_serial_t keyring, key; long ret; keyring = keyctl_join_session_keyring(argv[1]); OSERROR(keyring, "keyctl_join_session_keyring"); key = add_key("user", "a", "b", 1, keyring); OSERROR(key, "add_key"); ret = keyctl(KEYCTL_SESSION_TO_PARENT); OSERROR(ret, "KEYCTL_SESSION_TO_PARENT"); return 0; } Compiled and linked with -lkeyutils, you should see something like: [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: _ses 355907932 --alswrv 4043 -1 \_ keyring: _uid.4043 [dhowells@andromeda ~]$ /tmp/newpag [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: _ses 1055658746 --alswrv 4043 4043 \_ user: a [dhowells@andromeda ~]$ /tmp/newpag hello [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: hello 340417692 --alswrv 4043 4043 \_ user: a Where the test program creates a new session keyring, sticks a user key named 'a' into it and then installs it on its parent. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-09-02 02:14:21 -06:00
write_unlock_irq(&tasklist_lock);
rcu_read_unlock();
if (oldwork)
put_cred(container_of(oldwork, struct cred, rcu));
if (newwork)
put_cred(cred);
KEYS: Add a keyctl to install a process's session keyring on its parent [try #6] Add a keyctl to install a process's session keyring onto its parent. This replaces the parent's session keyring. Because the COW credential code does not permit one process to change another process's credentials directly, the change is deferred until userspace next starts executing again. Normally this will be after a wait*() syscall. To support this, three new security hooks have been provided: cred_alloc_blank() to allocate unset security creds, cred_transfer() to fill in the blank security creds and key_session_to_parent() - which asks the LSM if the process may replace its parent's session keyring. The replacement may only happen if the process has the same ownership details as its parent, and the process has LINK permission on the session keyring, and the session keyring is owned by the process, and the LSM permits it. Note that this requires alteration to each architecture's notify_resume path. This has been done for all arches barring blackfin, m68k* and xtensa, all of which need assembly alteration to support TIF_NOTIFY_RESUME. This allows the replacement to be performed at the point the parent process resumes userspace execution. This allows the userspace AFS pioctl emulation to fully emulate newpag() and the VIOCSETTOK and VIOCSETTOK2 pioctls, all of which require the ability to alter the parent process's PAG membership. However, since kAFS doesn't use PAGs per se, but rather dumps the keys into the session keyring, the session keyring of the parent must be replaced if, for example, VIOCSETTOK is passed the newpag flag. This can be tested with the following program: #include <stdio.h> #include <stdlib.h> #include <keyutils.h> #define KEYCTL_SESSION_TO_PARENT 18 #define OSERROR(X, S) do { if ((long)(X) == -1) { perror(S); exit(1); } } while(0) int main(int argc, char **argv) { key_serial_t keyring, key; long ret; keyring = keyctl_join_session_keyring(argv[1]); OSERROR(keyring, "keyctl_join_session_keyring"); key = add_key("user", "a", "b", 1, keyring); OSERROR(key, "add_key"); ret = keyctl(KEYCTL_SESSION_TO_PARENT); OSERROR(ret, "KEYCTL_SESSION_TO_PARENT"); return 0; } Compiled and linked with -lkeyutils, you should see something like: [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: _ses 355907932 --alswrv 4043 -1 \_ keyring: _uid.4043 [dhowells@andromeda ~]$ /tmp/newpag [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: _ses 1055658746 --alswrv 4043 4043 \_ user: a [dhowells@andromeda ~]$ /tmp/newpag hello [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: hello 340417692 --alswrv 4043 4043 \_ user: a Where the test program creates a new session keyring, sticks a user key named 'a' into it and then installs it on its parent. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-09-02 02:14:21 -06:00
return ret;
error_keyring:
key_ref_put(keyring_r);
return ret;
}
/*
* Apply a restriction to a given keyring.
*
* The caller must have Setattr permission to change keyring restrictions.
*
* The requested type name may be a NULL pointer to reject all attempts
* to link to the keyring. In this case, _restriction must also be NULL.
* Otherwise, both _type and _restriction must be non-NULL.
*
* Returns 0 if successful.
*/
long keyctl_restrict_keyring(key_serial_t id, const char __user *_type,
const char __user *_restriction)
{
key_ref_t key_ref;
char type[32];
char *restriction = NULL;
long ret;
keys: Replace uid/gid/perm permissions checking with an ACL Replace the uid/gid/perm permissions checking on a key with an ACL to allow the SETATTR and SEARCH permissions to be split. This will also allow a greater range of subjects to represented. ============ WHY DO THIS? ============ The problem is that SETATTR and SEARCH cover a slew of actions, not all of which should be grouped together. For SETATTR, this includes actions that are about controlling access to a key: (1) Changing a key's ownership. (2) Changing a key's security information. (3) Setting a keyring's restriction. And actions that are about managing a key's lifetime: (4) Setting an expiry time. (5) Revoking a key. and (proposed) managing a key as part of a cache: (6) Invalidating a key. Managing a key's lifetime doesn't really have anything to do with controlling access to that key. Expiry time is awkward since it's more about the lifetime of the content and so, in some ways goes better with WRITE permission. It can, however, be set unconditionally by a process with an appropriate authorisation token for instantiating a key, and can also be set by the key type driver when a key is instantiated, so lumping it with the access-controlling actions is probably okay. As for SEARCH permission, that currently covers: (1) Finding keys in a keyring tree during a search. (2) Permitting keyrings to be joined. (3) Invalidation. But these don't really belong together either, since these actions really need to be controlled separately. Finally, there are number of special cases to do with granting the administrator special rights to invalidate or clear keys that I would like to handle with the ACL rather than key flags and special checks. =============== WHAT IS CHANGED =============== The SETATTR permission is split to create two new permissions: (1) SET_SECURITY - which allows the key's owner, group and ACL to be changed and a restriction to be placed on a keyring. (2) REVOKE - which allows a key to be revoked. The SEARCH permission is split to create: (1) SEARCH - which allows a keyring to be search and a key to be found. (2) JOIN - which allows a keyring to be joined as a session keyring. (3) INVAL - which allows a key to be invalidated. The WRITE permission is also split to create: (1) WRITE - which allows a key's content to be altered and links to be added, removed and replaced in a keyring. (2) CLEAR - which allows a keyring to be cleared completely. This is split out to make it possible to give just this to an administrator. (3) REVOKE - see above. Keys acquire ACLs which consist of a series of ACEs, and all that apply are unioned together. An ACE specifies a subject, such as: (*) Possessor - permitted to anyone who 'possesses' a key (*) Owner - permitted to the key owner (*) Group - permitted to the key group (*) Everyone - permitted to everyone Note that 'Other' has been replaced with 'Everyone' on the assumption that you wouldn't grant a permit to 'Other' that you wouldn't also grant to everyone else. Further subjects may be made available by later patches. The ACE also specifies a permissions mask. The set of permissions is now: VIEW Can view the key metadata READ Can read the key content WRITE Can update/modify the key content SEARCH Can find the key by searching/requesting LINK Can make a link to the key SET_SECURITY Can change owner, ACL, expiry INVAL Can invalidate REVOKE Can revoke JOIN Can join this keyring CLEAR Can clear this keyring The KEYCTL_SETPERM function is then deprecated. The KEYCTL_SET_TIMEOUT function then is permitted if SET_SECURITY is set, or if the caller has a valid instantiation auth token. The KEYCTL_INVALIDATE function then requires INVAL. The KEYCTL_REVOKE function then requires REVOKE. The KEYCTL_JOIN_SESSION_KEYRING function then requires JOIN to join an existing keyring. The JOIN permission is enabled by default for session keyrings and manually created keyrings only. ====================== BACKWARD COMPATIBILITY ====================== To maintain backward compatibility, KEYCTL_SETPERM will translate the permissions mask it is given into a new ACL for a key - unless KEYCTL_SET_ACL has been called on that key, in which case an error will be returned. It will convert possessor, owner, group and other permissions into separate ACEs, if each portion of the mask is non-zero. SETATTR permission turns on all of INVAL, REVOKE and SET_SECURITY. WRITE permission turns on WRITE, REVOKE and, if a keyring, CLEAR. JOIN is turned on if a keyring is being altered. The KEYCTL_DESCRIBE function translates the ACL back into a permissions mask to return depending on possessor, owner, group and everyone ACEs. It will make the following mappings: (1) INVAL, JOIN -> SEARCH (2) SET_SECURITY -> SETATTR (3) REVOKE -> WRITE if SETATTR isn't already set (4) CLEAR -> WRITE Note that the value subsequently returned by KEYCTL_DESCRIBE may not match the value set with KEYCTL_SETATTR. ======= TESTING ======= This passes the keyutils testsuite for all but a couple of tests: (1) tests/keyctl/dh_compute/badargs: The first wrong-key-type test now returns EOPNOTSUPP rather than ENOKEY as READ permission isn't removed if the type doesn't have ->read(). You still can't actually read the key. (2) tests/keyctl/permitting/valid: The view-other-permissions test doesn't work as Other has been replaced with Everyone in the ACL. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-27 16:03:07 -06:00
key_ref = lookup_user_key(id, 0, KEY_NEED_SETSEC);
if (IS_ERR(key_ref))
return PTR_ERR(key_ref);
ret = -EINVAL;
if (_type) {
if (!_restriction)
goto error;
ret = key_get_type_from_user(type, _type, sizeof(type));
if (ret < 0)
goto error;
restriction = strndup_user(_restriction, PAGE_SIZE);
if (IS_ERR(restriction)) {
ret = PTR_ERR(restriction);
goto error;
}
} else {
if (_restriction)
goto error;
}
ret = keyring_restrict(key_ref, _type ? type : NULL, restriction);
kfree(restriction);
error:
key_ref_put(key_ref);
return ret;
}
/*
* Get keyrings subsystem capabilities.
*/
long keyctl_capabilities(unsigned char __user *_buffer, size_t buflen)
{
size_t size = buflen;
if (size > 0) {
if (size > sizeof(keyrings_capabilities))
size = sizeof(keyrings_capabilities);
if (copy_to_user(_buffer, keyrings_capabilities, size) != 0)
return -EFAULT;
if (size < buflen &&
clear_user(_buffer + size, buflen - size) != 0)
return -EFAULT;
}
return sizeof(keyrings_capabilities);
}
/*
* The key control system call
*/
SYSCALL_DEFINE5(keyctl, int, option, unsigned long, arg2, unsigned long, arg3,
unsigned long, arg4, unsigned long, arg5)
{
switch (option) {
case KEYCTL_GET_KEYRING_ID:
return keyctl_get_keyring_ID((key_serial_t) arg2,
(int) arg3);
case KEYCTL_JOIN_SESSION_KEYRING:
return keyctl_join_session_keyring((const char __user *) arg2);
case KEYCTL_UPDATE:
return keyctl_update_key((key_serial_t) arg2,
(const void __user *) arg3,
(size_t) arg4);
case KEYCTL_REVOKE:
return keyctl_revoke_key((key_serial_t) arg2);
case KEYCTL_DESCRIBE:
return keyctl_describe_key((key_serial_t) arg2,
(char __user *) arg3,
(unsigned) arg4);
case KEYCTL_CLEAR:
return keyctl_keyring_clear((key_serial_t) arg2);
case KEYCTL_LINK:
return keyctl_keyring_link((key_serial_t) arg2,
(key_serial_t) arg3);
case KEYCTL_UNLINK:
return keyctl_keyring_unlink((key_serial_t) arg2,
(key_serial_t) arg3);
case KEYCTL_SEARCH:
return keyctl_keyring_search((key_serial_t) arg2,
(const char __user *) arg3,
(const char __user *) arg4,
(key_serial_t) arg5);
case KEYCTL_READ:
return keyctl_read_key((key_serial_t) arg2,
(char __user *) arg3,
(size_t) arg4);
case KEYCTL_CHOWN:
return keyctl_chown_key((key_serial_t) arg2,
(uid_t) arg3,
(gid_t) arg4);
case KEYCTL_SETPERM:
return keyctl_setperm_key((key_serial_t) arg2,
keys: Replace uid/gid/perm permissions checking with an ACL Replace the uid/gid/perm permissions checking on a key with an ACL to allow the SETATTR and SEARCH permissions to be split. This will also allow a greater range of subjects to represented. ============ WHY DO THIS? ============ The problem is that SETATTR and SEARCH cover a slew of actions, not all of which should be grouped together. For SETATTR, this includes actions that are about controlling access to a key: (1) Changing a key's ownership. (2) Changing a key's security information. (3) Setting a keyring's restriction. And actions that are about managing a key's lifetime: (4) Setting an expiry time. (5) Revoking a key. and (proposed) managing a key as part of a cache: (6) Invalidating a key. Managing a key's lifetime doesn't really have anything to do with controlling access to that key. Expiry time is awkward since it's more about the lifetime of the content and so, in some ways goes better with WRITE permission. It can, however, be set unconditionally by a process with an appropriate authorisation token for instantiating a key, and can also be set by the key type driver when a key is instantiated, so lumping it with the access-controlling actions is probably okay. As for SEARCH permission, that currently covers: (1) Finding keys in a keyring tree during a search. (2) Permitting keyrings to be joined. (3) Invalidation. But these don't really belong together either, since these actions really need to be controlled separately. Finally, there are number of special cases to do with granting the administrator special rights to invalidate or clear keys that I would like to handle with the ACL rather than key flags and special checks. =============== WHAT IS CHANGED =============== The SETATTR permission is split to create two new permissions: (1) SET_SECURITY - which allows the key's owner, group and ACL to be changed and a restriction to be placed on a keyring. (2) REVOKE - which allows a key to be revoked. The SEARCH permission is split to create: (1) SEARCH - which allows a keyring to be search and a key to be found. (2) JOIN - which allows a keyring to be joined as a session keyring. (3) INVAL - which allows a key to be invalidated. The WRITE permission is also split to create: (1) WRITE - which allows a key's content to be altered and links to be added, removed and replaced in a keyring. (2) CLEAR - which allows a keyring to be cleared completely. This is split out to make it possible to give just this to an administrator. (3) REVOKE - see above. Keys acquire ACLs which consist of a series of ACEs, and all that apply are unioned together. An ACE specifies a subject, such as: (*) Possessor - permitted to anyone who 'possesses' a key (*) Owner - permitted to the key owner (*) Group - permitted to the key group (*) Everyone - permitted to everyone Note that 'Other' has been replaced with 'Everyone' on the assumption that you wouldn't grant a permit to 'Other' that you wouldn't also grant to everyone else. Further subjects may be made available by later patches. The ACE also specifies a permissions mask. The set of permissions is now: VIEW Can view the key metadata READ Can read the key content WRITE Can update/modify the key content SEARCH Can find the key by searching/requesting LINK Can make a link to the key SET_SECURITY Can change owner, ACL, expiry INVAL Can invalidate REVOKE Can revoke JOIN Can join this keyring CLEAR Can clear this keyring The KEYCTL_SETPERM function is then deprecated. The KEYCTL_SET_TIMEOUT function then is permitted if SET_SECURITY is set, or if the caller has a valid instantiation auth token. The KEYCTL_INVALIDATE function then requires INVAL. The KEYCTL_REVOKE function then requires REVOKE. The KEYCTL_JOIN_SESSION_KEYRING function then requires JOIN to join an existing keyring. The JOIN permission is enabled by default for session keyrings and manually created keyrings only. ====================== BACKWARD COMPATIBILITY ====================== To maintain backward compatibility, KEYCTL_SETPERM will translate the permissions mask it is given into a new ACL for a key - unless KEYCTL_SET_ACL has been called on that key, in which case an error will be returned. It will convert possessor, owner, group and other permissions into separate ACEs, if each portion of the mask is non-zero. SETATTR permission turns on all of INVAL, REVOKE and SET_SECURITY. WRITE permission turns on WRITE, REVOKE and, if a keyring, CLEAR. JOIN is turned on if a keyring is being altered. The KEYCTL_DESCRIBE function translates the ACL back into a permissions mask to return depending on possessor, owner, group and everyone ACEs. It will make the following mappings: (1) INVAL, JOIN -> SEARCH (2) SET_SECURITY -> SETATTR (3) REVOKE -> WRITE if SETATTR isn't already set (4) CLEAR -> WRITE Note that the value subsequently returned by KEYCTL_DESCRIBE may not match the value set with KEYCTL_SETATTR. ======= TESTING ======= This passes the keyutils testsuite for all but a couple of tests: (1) tests/keyctl/dh_compute/badargs: The first wrong-key-type test now returns EOPNOTSUPP rather than ENOKEY as READ permission isn't removed if the type doesn't have ->read(). You still can't actually read the key. (2) tests/keyctl/permitting/valid: The view-other-permissions test doesn't work as Other has been replaced with Everyone in the ACL. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-27 16:03:07 -06:00
(unsigned int)arg3);
case KEYCTL_INSTANTIATE:
return keyctl_instantiate_key((key_serial_t) arg2,
(const void __user *) arg3,
(size_t) arg4,
(key_serial_t) arg5);
case KEYCTL_NEGATE:
return keyctl_negate_key((key_serial_t) arg2,
(unsigned) arg3,
(key_serial_t) arg4);
[PATCH] Keys: Make request-key create an authorisation key The attached patch makes the following changes: (1) There's a new special key type called ".request_key_auth". This is an authorisation key for when one process requests a key and another process is started to construct it. This type of key cannot be created by the user; nor can it be requested by kernel services. Authorisation keys hold two references: (a) Each refers to a key being constructed. When the key being constructed is instantiated the authorisation key is revoked, rendering it of no further use. (b) The "authorising process". This is either: (i) the process that called request_key(), or: (ii) if the process that called request_key() itself had an authorisation key in its session keyring, then the authorising process referred to by that authorisation key will also be referred to by the new authorisation key. This means that the process that initiated a chain of key requests will authorise the lot of them, and will, by default, wind up with the keys obtained from them in its keyrings. (2) request_key() creates an authorisation key which is then passed to /sbin/request-key in as part of a new session keyring. (3) When request_key() is searching for a key to hand back to the caller, if it comes across an authorisation key in the session keyring of the calling process, it will also search the keyrings of the process specified therein and it will use the specified process's credentials (fsuid, fsgid, groups) to do that rather than the calling process's credentials. This allows a process started by /sbin/request-key to find keys belonging to the authorising process. (4) A key can be read, even if the process executing KEYCTL_READ doesn't have direct read or search permission if that key is contained within the keyrings of a process specified by an authorisation key found within the calling process's session keyring, and is searchable using the credentials of the authorising process. This allows a process started by /sbin/request-key to read keys belonging to the authorising process. (5) The magic KEY_SPEC_*_KEYRING key IDs when passed to KEYCTL_INSTANTIATE or KEYCTL_NEGATE will specify a keyring of the authorising process, rather than the process doing the instantiation. (6) One of the process keyrings can be nominated as the default to which request_key() should attach new keys if not otherwise specified. This is done with KEYCTL_SET_REQKEY_KEYRING and one of the KEY_REQKEY_DEFL_* constants. The current setting can also be read using this call. (7) request_key() is partially interruptible. If it is waiting for another process to finish constructing a key, it can be interrupted. This permits a request-key cycle to be broken without recourse to rebooting. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-Off-By: Benoit Boissinot <benoit.boissinot@ens-lyon.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 23:00:56 -06:00
case KEYCTL_SET_REQKEY_KEYRING:
return keyctl_set_reqkey_keyring(arg2);
case KEYCTL_SET_TIMEOUT:
return keyctl_set_timeout((key_serial_t) arg2,
(unsigned) arg3);
[PATCH] keys: Permit running process to instantiate keys Make it possible for a running process (such as gssapid) to be able to instantiate a key, as was requested by Trond Myklebust for NFS4. The patch makes the following changes: (1) A new, optional key type method has been added. This permits a key type to intercept requests at the point /sbin/request-key is about to be spawned and do something else with them - passing them over the rpc_pipefs files or netlink sockets for instance. The uninstantiated key, the authorisation key and the intended operation name are passed to the method. (2) The callout_info is no longer passed as an argument to /sbin/request-key to prevent unauthorised viewing of this data using ps or by looking in /proc/pid/cmdline. This means that the old /sbin/request-key program will not work with the patched kernel as it will expect to see an extra argument that is no longer there. A revised keyutils package will be made available tomorrow. (3) The callout_info is now attached to the authorisation key. Reading this key will retrieve the information. (4) A new field has been added to the task_struct. This holds the authorisation key currently active for a thread. Searches now look here for the caller's set of keys rather than looking for an auth key in the lowest level of the session keyring. This permits a thread to be servicing multiple requests at once and to switch between them. Note that this is per-thread, not per-process, and so is usable in multithreaded programs. The setting of this field is inherited across fork and exec. (5) A new keyctl function (KEYCTL_ASSUME_AUTHORITY) has been added that permits a thread to assume the authority to deal with an uninstantiated key. Assumption is only permitted if the authorisation key associated with the uninstantiated key is somewhere in the thread's keyrings. This function can also clear the assumption. (6) A new magic key specifier has been added to refer to the currently assumed authorisation key (KEY_SPEC_REQKEY_AUTH_KEY). (7) Instantiation will only proceed if the appropriate authorisation key is assumed first. The assumed authorisation key is discarded if instantiation is successful. (8) key_validate() is moved from the file of request_key functions to the file of permissions functions. (9) The documentation is updated. From: <Valdis.Kletnieks@vt.edu> Build fix. Signed-off-by: David Howells <dhowells@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Alexander Zangerl <az@bond.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:02:47 -07:00
case KEYCTL_ASSUME_AUTHORITY:
return keyctl_assume_authority((key_serial_t) arg2);
case KEYCTL_GET_SECURITY:
return keyctl_get_security((key_serial_t) arg2,
(char __user *) arg3,
(size_t) arg4);
KEYS: Add a keyctl to install a process's session keyring on its parent [try #6] Add a keyctl to install a process's session keyring onto its parent. This replaces the parent's session keyring. Because the COW credential code does not permit one process to change another process's credentials directly, the change is deferred until userspace next starts executing again. Normally this will be after a wait*() syscall. To support this, three new security hooks have been provided: cred_alloc_blank() to allocate unset security creds, cred_transfer() to fill in the blank security creds and key_session_to_parent() - which asks the LSM if the process may replace its parent's session keyring. The replacement may only happen if the process has the same ownership details as its parent, and the process has LINK permission on the session keyring, and the session keyring is owned by the process, and the LSM permits it. Note that this requires alteration to each architecture's notify_resume path. This has been done for all arches barring blackfin, m68k* and xtensa, all of which need assembly alteration to support TIF_NOTIFY_RESUME. This allows the replacement to be performed at the point the parent process resumes userspace execution. This allows the userspace AFS pioctl emulation to fully emulate newpag() and the VIOCSETTOK and VIOCSETTOK2 pioctls, all of which require the ability to alter the parent process's PAG membership. However, since kAFS doesn't use PAGs per se, but rather dumps the keys into the session keyring, the session keyring of the parent must be replaced if, for example, VIOCSETTOK is passed the newpag flag. This can be tested with the following program: #include <stdio.h> #include <stdlib.h> #include <keyutils.h> #define KEYCTL_SESSION_TO_PARENT 18 #define OSERROR(X, S) do { if ((long)(X) == -1) { perror(S); exit(1); } } while(0) int main(int argc, char **argv) { key_serial_t keyring, key; long ret; keyring = keyctl_join_session_keyring(argv[1]); OSERROR(keyring, "keyctl_join_session_keyring"); key = add_key("user", "a", "b", 1, keyring); OSERROR(key, "add_key"); ret = keyctl(KEYCTL_SESSION_TO_PARENT); OSERROR(ret, "KEYCTL_SESSION_TO_PARENT"); return 0; } Compiled and linked with -lkeyutils, you should see something like: [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: _ses 355907932 --alswrv 4043 -1 \_ keyring: _uid.4043 [dhowells@andromeda ~]$ /tmp/newpag [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: _ses 1055658746 --alswrv 4043 4043 \_ user: a [dhowells@andromeda ~]$ /tmp/newpag hello [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: hello 340417692 --alswrv 4043 4043 \_ user: a Where the test program creates a new session keyring, sticks a user key named 'a' into it and then installs it on its parent. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-09-02 02:14:21 -06:00
case KEYCTL_SESSION_TO_PARENT:
return keyctl_session_to_parent();
case KEYCTL_REJECT:
return keyctl_reject_key((key_serial_t) arg2,
(unsigned) arg3,
(unsigned) arg4,
(key_serial_t) arg5);
case KEYCTL_INSTANTIATE_IOV:
return keyctl_instantiate_key_iov(
(key_serial_t) arg2,
(const struct iovec __user *) arg3,
(unsigned) arg4,
(key_serial_t) arg5);
case KEYCTL_INVALIDATE:
return keyctl_invalidate_key((key_serial_t) arg2);
KEYS: Add per-user_namespace registers for persistent per-UID kerberos caches Add support for per-user_namespace registers of persistent per-UID kerberos caches held within the kernel. This allows the kerberos cache to be retained beyond the life of all a user's processes so that the user's cron jobs can work. The kerberos cache is envisioned as a keyring/key tree looking something like: struct user_namespace \___ .krb_cache keyring - The register \___ _krb.0 keyring - Root's Kerberos cache \___ _krb.5000 keyring - User 5000's Kerberos cache \___ _krb.5001 keyring - User 5001's Kerberos cache \___ tkt785 big_key - A ccache blob \___ tkt12345 big_key - Another ccache blob Or possibly: struct user_namespace \___ .krb_cache keyring - The register \___ _krb.0 keyring - Root's Kerberos cache \___ _krb.5000 keyring - User 5000's Kerberos cache \___ _krb.5001 keyring - User 5001's Kerberos cache \___ tkt785 keyring - A ccache \___ krbtgt/REDHAT.COM@REDHAT.COM big_key \___ http/REDHAT.COM@REDHAT.COM user \___ afs/REDHAT.COM@REDHAT.COM user \___ nfs/REDHAT.COM@REDHAT.COM user \___ krbtgt/KERNEL.ORG@KERNEL.ORG big_key \___ http/KERNEL.ORG@KERNEL.ORG big_key What goes into a particular Kerberos cache is entirely up to userspace. Kernel support is limited to giving you the Kerberos cache keyring that you want. The user asks for their Kerberos cache by: krb_cache = keyctl_get_krbcache(uid, dest_keyring); The uid is -1 or the user's own UID for the user's own cache or the uid of some other user's cache (requires CAP_SETUID). This permits rpc.gssd or whatever to mess with the cache. The cache returned is a keyring named "_krb.<uid>" that the possessor can read, search, clear, invalidate, unlink from and add links to. Active LSMs get a chance to rule on whether the caller is permitted to make a link. Each uid's cache keyring is created when it first accessed and is given a timeout that is extended each time this function is called so that the keyring goes away after a while. The timeout is configurable by sysctl but defaults to three days. Each user_namespace struct gets a lazily-created keyring that serves as the register. The cache keyrings are added to it. This means that standard key search and garbage collection facilities are available. The user_namespace struct's register goes away when it does and anything left in it is then automatically gc'd. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Simo Sorce <simo@redhat.com> cc: Serge E. Hallyn <serge.hallyn@ubuntu.com> cc: Eric W. Biederman <ebiederm@xmission.com>
2013-09-24 03:35:19 -06:00
case KEYCTL_GET_PERSISTENT:
return keyctl_get_persistent((uid_t)arg2, (key_serial_t)arg3);
case KEYCTL_DH_COMPUTE:
return keyctl_dh_compute((struct keyctl_dh_params __user *) arg2,
(char __user *) arg3, (size_t) arg4,
(struct keyctl_kdf_params __user *) arg5);
case KEYCTL_RESTRICT_KEYRING:
return keyctl_restrict_keyring((key_serial_t) arg2,
(const char __user *) arg3,
(const char __user *) arg4);
KEYS: Provide keyctls to drive the new key type ops for asymmetric keys [ver #2] Provide five keyctl functions that permit userspace to make use of the new key type ops for accessing and driving asymmetric keys. (*) Query an asymmetric key. long keyctl(KEYCTL_PKEY_QUERY, key_serial_t key, unsigned long reserved, struct keyctl_pkey_query *info); Get information about an asymmetric key. The information is returned in the keyctl_pkey_query struct: __u32 supported_ops; A bit mask of flags indicating which ops are supported. This is constructed from a bitwise-OR of: KEYCTL_SUPPORTS_{ENCRYPT,DECRYPT,SIGN,VERIFY} __u32 key_size; The size in bits of the key. __u16 max_data_size; __u16 max_sig_size; __u16 max_enc_size; __u16 max_dec_size; The maximum sizes in bytes of a blob of data to be signed, a signature blob, a blob to be encrypted and a blob to be decrypted. reserved must be set to 0. This is intended for future use to hand over one or more passphrases needed unlock a key. If successful, 0 is returned. If the key is not an asymmetric key, EOPNOTSUPP is returned. (*) Encrypt, decrypt, sign or verify a blob using an asymmetric key. long keyctl(KEYCTL_PKEY_ENCRYPT, const struct keyctl_pkey_params *params, const char *info, const void *in, void *out); long keyctl(KEYCTL_PKEY_DECRYPT, const struct keyctl_pkey_params *params, const char *info, const void *in, void *out); long keyctl(KEYCTL_PKEY_SIGN, const struct keyctl_pkey_params *params, const char *info, const void *in, void *out); long keyctl(KEYCTL_PKEY_VERIFY, const struct keyctl_pkey_params *params, const char *info, const void *in, const void *in2); Use an asymmetric key to perform a public-key cryptographic operation a blob of data. The parameter block pointed to by params contains a number of integer values: __s32 key_id; __u32 in_len; __u32 out_len; __u32 in2_len; For a given operation, the in and out buffers are used as follows: Operation ID in,in_len out,out_len in2,in2_len ======================= =============== =============== =========== KEYCTL_PKEY_ENCRYPT Raw data Encrypted data - KEYCTL_PKEY_DECRYPT Encrypted data Raw data - KEYCTL_PKEY_SIGN Raw data Signature - KEYCTL_PKEY_VERIFY Raw data - Signature info is a string of key=value pairs that supply supplementary information. The __spare space in the parameter block must be set to 0. This is intended, amongst other things, to allow the passing of passphrases required to unlock a key. If successful, encrypt, decrypt and sign all return the amount of data written into the output buffer. Verification returns 0 on success. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Marcel Holtmann <marcel@holtmann.org> Reviewed-by: Marcel Holtmann <marcel@holtmann.org> Reviewed-by: Denis Kenzior <denkenz@gmail.com> Tested-by: Denis Kenzior <denkenz@gmail.com> Signed-off-by: James Morris <james.morris@microsoft.com>
2018-10-09 10:46:59 -06:00
case KEYCTL_PKEY_QUERY:
if (arg3 != 0)
return -EINVAL;
return keyctl_pkey_query((key_serial_t)arg2,
(const char __user *)arg4,
(struct keyctl_pkey_query __user *)arg5);
KEYS: Provide keyctls to drive the new key type ops for asymmetric keys [ver #2] Provide five keyctl functions that permit userspace to make use of the new key type ops for accessing and driving asymmetric keys. (*) Query an asymmetric key. long keyctl(KEYCTL_PKEY_QUERY, key_serial_t key, unsigned long reserved, struct keyctl_pkey_query *info); Get information about an asymmetric key. The information is returned in the keyctl_pkey_query struct: __u32 supported_ops; A bit mask of flags indicating which ops are supported. This is constructed from a bitwise-OR of: KEYCTL_SUPPORTS_{ENCRYPT,DECRYPT,SIGN,VERIFY} __u32 key_size; The size in bits of the key. __u16 max_data_size; __u16 max_sig_size; __u16 max_enc_size; __u16 max_dec_size; The maximum sizes in bytes of a blob of data to be signed, a signature blob, a blob to be encrypted and a blob to be decrypted. reserved must be set to 0. This is intended for future use to hand over one or more passphrases needed unlock a key. If successful, 0 is returned. If the key is not an asymmetric key, EOPNOTSUPP is returned. (*) Encrypt, decrypt, sign or verify a blob using an asymmetric key. long keyctl(KEYCTL_PKEY_ENCRYPT, const struct keyctl_pkey_params *params, const char *info, const void *in, void *out); long keyctl(KEYCTL_PKEY_DECRYPT, const struct keyctl_pkey_params *params, const char *info, const void *in, void *out); long keyctl(KEYCTL_PKEY_SIGN, const struct keyctl_pkey_params *params, const char *info, const void *in, void *out); long keyctl(KEYCTL_PKEY_VERIFY, const struct keyctl_pkey_params *params, const char *info, const void *in, const void *in2); Use an asymmetric key to perform a public-key cryptographic operation a blob of data. The parameter block pointed to by params contains a number of integer values: __s32 key_id; __u32 in_len; __u32 out_len; __u32 in2_len; For a given operation, the in and out buffers are used as follows: Operation ID in,in_len out,out_len in2,in2_len ======================= =============== =============== =========== KEYCTL_PKEY_ENCRYPT Raw data Encrypted data - KEYCTL_PKEY_DECRYPT Encrypted data Raw data - KEYCTL_PKEY_SIGN Raw data Signature - KEYCTL_PKEY_VERIFY Raw data - Signature info is a string of key=value pairs that supply supplementary information. The __spare space in the parameter block must be set to 0. This is intended, amongst other things, to allow the passing of passphrases required to unlock a key. If successful, encrypt, decrypt and sign all return the amount of data written into the output buffer. Verification returns 0 on success. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Marcel Holtmann <marcel@holtmann.org> Reviewed-by: Marcel Holtmann <marcel@holtmann.org> Reviewed-by: Denis Kenzior <denkenz@gmail.com> Tested-by: Denis Kenzior <denkenz@gmail.com> Signed-off-by: James Morris <james.morris@microsoft.com>
2018-10-09 10:46:59 -06:00
case KEYCTL_PKEY_ENCRYPT:
case KEYCTL_PKEY_DECRYPT:
case KEYCTL_PKEY_SIGN:
return keyctl_pkey_e_d_s(
option,
(const struct keyctl_pkey_params __user *)arg2,
(const char __user *)arg3,
(const void __user *)arg4,
(void __user *)arg5);
case KEYCTL_PKEY_VERIFY:
return keyctl_pkey_verify(
(const struct keyctl_pkey_params __user *)arg2,
(const char __user *)arg3,
(const void __user *)arg4,
(const void __user *)arg5);
case KEYCTL_MOVE:
return keyctl_keyring_move((key_serial_t)arg2,
(key_serial_t)arg3,
(key_serial_t)arg4,
(unsigned int)arg5);
case KEYCTL_CAPABILITIES:
return keyctl_capabilities((unsigned char __user *)arg2, (size_t)arg3);
default:
return -EOPNOTSUPP;
}
}