1
0
Fork 0
alistair23-linux/net/ipv4/tcp_offload.c

327 lines
7.4 KiB
C
Raw Normal View History

/*
* IPV4 GSO/GRO offload support
* Linux INET implementation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
* TCPv4 GSO/GRO support
*/
#include <linux/skbuff.h>
#include <net/tcp.h>
#include <net/protocol.h>
static void tcp_gso_tstamp(struct sk_buff *skb, unsigned int ts_seq,
unsigned int seq, unsigned int mss)
net-timestamp: TCP timestamping TCP timestamping extends SO_TIMESTAMPING to bytestreams. Bytestreams do not have a 1:1 relationship between send() buffers and network packets. The feature interprets a send call on a bytestream as a request for a timestamp for the last byte in that send() buffer. The choice corresponds to a request for a timestamp when all bytes in the buffer have been sent. That assumption depends on in-order kernel transmission. This is the common case. That said, it is possible to construct a traffic shaping tree that would result in reordering. The guarantee is strong, then, but not ironclad. This implementation supports send and sendpages (splice). GSO replaces one large packet with multiple smaller packets. This patch also copies the option into the correct smaller packet. This patch does not yet support timestamping on data in an initial TCP Fast Open SYN, because that takes a very different data path. If ID generation in ee_data is enabled, bytestream timestamps return a byte offset, instead of the packet counter for datagrams. The implementation supports a single timestamp per packet. It silenty replaces requests for previous timestamps. To avoid missing tstamps, flush the tcp queue by disabling Nagle, cork and autocork. Missing tstamps can be detected by offset when the ee_data ID is enabled. Implementation details: - On GSO, the timestamping code can be included in the main loop. I moved it into its own loop to reduce the impact on the common case to a single branch. - To avoid leaking the absolute seqno to userspace, the offset returned in ee_data must always be relative. It is an offset between an skb and sk field. The first is always set (also for GSO & ACK). The second must also never be uninitialized. Only allow the ID option on sockets in the ESTABLISHED state, for which the seqno is available. Never reset it to zero (instead, move it to the current seqno when reenabling the option). Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-04 20:11:49 -06:00
{
while (skb) {
if (before(ts_seq, seq + mss)) {
skb_shinfo(skb)->tx_flags |= SKBTX_SW_TSTAMP;
net-timestamp: TCP timestamping TCP timestamping extends SO_TIMESTAMPING to bytestreams. Bytestreams do not have a 1:1 relationship between send() buffers and network packets. The feature interprets a send call on a bytestream as a request for a timestamp for the last byte in that send() buffer. The choice corresponds to a request for a timestamp when all bytes in the buffer have been sent. That assumption depends on in-order kernel transmission. This is the common case. That said, it is possible to construct a traffic shaping tree that would result in reordering. The guarantee is strong, then, but not ironclad. This implementation supports send and sendpages (splice). GSO replaces one large packet with multiple smaller packets. This patch also copies the option into the correct smaller packet. This patch does not yet support timestamping on data in an initial TCP Fast Open SYN, because that takes a very different data path. If ID generation in ee_data is enabled, bytestream timestamps return a byte offset, instead of the packet counter for datagrams. The implementation supports a single timestamp per packet. It silenty replaces requests for previous timestamps. To avoid missing tstamps, flush the tcp queue by disabling Nagle, cork and autocork. Missing tstamps can be detected by offset when the ee_data ID is enabled. Implementation details: - On GSO, the timestamping code can be included in the main loop. I moved it into its own loop to reduce the impact on the common case to a single branch. - To avoid leaking the absolute seqno to userspace, the offset returned in ee_data must always be relative. It is an offset between an skb and sk field. The first is always set (also for GSO & ACK). The second must also never be uninitialized. Only allow the ID option on sockets in the ESTABLISHED state, for which the seqno is available. Never reset it to zero (instead, move it to the current seqno when reenabling the option). Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-04 20:11:49 -06:00
skb_shinfo(skb)->tskey = ts_seq;
return;
}
skb = skb->next;
seq += mss;
}
}
struct sk_buff *tcp_gso_segment(struct sk_buff *skb,
netdev_features_t features)
{
struct sk_buff *segs = ERR_PTR(-EINVAL);
unsigned int sum_truesize = 0;
struct tcphdr *th;
unsigned int thlen;
unsigned int seq;
__be32 delta;
unsigned int oldlen;
unsigned int mss;
struct sk_buff *gso_skb = skb;
__sum16 newcheck;
bool ooo_okay, copy_destructor;
if (!pskb_may_pull(skb, sizeof(*th)))
goto out;
th = tcp_hdr(skb);
thlen = th->doff * 4;
if (thlen < sizeof(*th))
goto out;
if (!pskb_may_pull(skb, thlen))
goto out;
oldlen = (u16)~skb->len;
__skb_pull(skb, thlen);
mss = tcp_skb_mss(skb);
if (unlikely(skb->len <= mss))
goto out;
if (skb_gso_ok(skb, features | NETIF_F_GSO_ROBUST)) {
/* Packet is from an untrusted source, reset gso_segs. */
int type = skb_shinfo(skb)->gso_type;
if (unlikely(type &
~(SKB_GSO_TCPV4 |
SKB_GSO_DODGY |
SKB_GSO_TCP_ECN |
SKB_GSO_TCPV6 |
SKB_GSO_GRE |
SKB_GSO_GRE_CSUM |
SKB_GSO_IPIP |
SKB_GSO_SIT |
SKB_GSO_MPLS |
SKB_GSO_UDP_TUNNEL |
SKB_GSO_UDP_TUNNEL_CSUM |
0) ||
!(type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6))))
goto out;
skb_shinfo(skb)->gso_segs = DIV_ROUND_UP(skb->len, mss);
segs = NULL;
goto out;
}
copy_destructor = gso_skb->destructor == tcp_wfree;
ooo_okay = gso_skb->ooo_okay;
/* All segments but the first should have ooo_okay cleared */
skb->ooo_okay = 0;
segs = skb_segment(skb, features);
if (IS_ERR(segs))
goto out;
/* Only first segment might have ooo_okay set */
segs->ooo_okay = ooo_okay;
delta = htonl(oldlen + (thlen + mss));
skb = segs;
th = tcp_hdr(skb);
seq = ntohl(th->seq);
net-timestamp: TCP timestamping TCP timestamping extends SO_TIMESTAMPING to bytestreams. Bytestreams do not have a 1:1 relationship between send() buffers and network packets. The feature interprets a send call on a bytestream as a request for a timestamp for the last byte in that send() buffer. The choice corresponds to a request for a timestamp when all bytes in the buffer have been sent. That assumption depends on in-order kernel transmission. This is the common case. That said, it is possible to construct a traffic shaping tree that would result in reordering. The guarantee is strong, then, but not ironclad. This implementation supports send and sendpages (splice). GSO replaces one large packet with multiple smaller packets. This patch also copies the option into the correct smaller packet. This patch does not yet support timestamping on data in an initial TCP Fast Open SYN, because that takes a very different data path. If ID generation in ee_data is enabled, bytestream timestamps return a byte offset, instead of the packet counter for datagrams. The implementation supports a single timestamp per packet. It silenty replaces requests for previous timestamps. To avoid missing tstamps, flush the tcp queue by disabling Nagle, cork and autocork. Missing tstamps can be detected by offset when the ee_data ID is enabled. Implementation details: - On GSO, the timestamping code can be included in the main loop. I moved it into its own loop to reduce the impact on the common case to a single branch. - To avoid leaking the absolute seqno to userspace, the offset returned in ee_data must always be relative. It is an offset between an skb and sk field. The first is always set (also for GSO & ACK). The second must also never be uninitialized. Only allow the ID option on sockets in the ESTABLISHED state, for which the seqno is available. Never reset it to zero (instead, move it to the current seqno when reenabling the option). Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-04 20:11:49 -06:00
if (unlikely(skb_shinfo(gso_skb)->tx_flags & SKBTX_SW_TSTAMP))
tcp_gso_tstamp(segs, skb_shinfo(gso_skb)->tskey, seq, mss);
newcheck = ~csum_fold((__force __wsum)((__force u32)th->check +
(__force u32)delta));
do {
th->fin = th->psh = 0;
th->check = newcheck;
if (skb->ip_summed != CHECKSUM_PARTIAL)
th->check = gso_make_checksum(skb, ~th->check);
seq += mss;
if (copy_destructor) {
skb->destructor = gso_skb->destructor;
skb->sk = gso_skb->sk;
sum_truesize += skb->truesize;
}
skb = skb->next;
th = tcp_hdr(skb);
th->seq = htonl(seq);
th->cwr = 0;
} while (skb->next);
/* Following permits TCP Small Queues to work well with GSO :
* The callback to TCP stack will be called at the time last frag
* is freed at TX completion, and not right now when gso_skb
* is freed by GSO engine
*/
if (copy_destructor) {
swap(gso_skb->sk, skb->sk);
swap(gso_skb->destructor, skb->destructor);
sum_truesize += skb->truesize;
atomic_add(sum_truesize - gso_skb->truesize,
&skb->sk->sk_wmem_alloc);
}
delta = htonl(oldlen + (skb_tail_pointer(skb) -
skb_transport_header(skb)) +
skb->data_len);
th->check = ~csum_fold((__force __wsum)((__force u32)th->check +
(__force u32)delta));
if (skb->ip_summed != CHECKSUM_PARTIAL)
th->check = gso_make_checksum(skb, ~th->check);
out:
return segs;
}
struct sk_buff **tcp_gro_receive(struct sk_buff **head, struct sk_buff *skb)
{
struct sk_buff **pp = NULL;
struct sk_buff *p;
struct tcphdr *th;
struct tcphdr *th2;
unsigned int len;
unsigned int thlen;
__be32 flags;
unsigned int mss = 1;
unsigned int hlen;
unsigned int off;
int flush = 1;
int i;
off = skb_gro_offset(skb);
hlen = off + sizeof(*th);
th = skb_gro_header_fast(skb, off);
if (skb_gro_header_hard(skb, hlen)) {
th = skb_gro_header_slow(skb, hlen, off);
if (unlikely(!th))
goto out;
}
thlen = th->doff * 4;
if (thlen < sizeof(*th))
goto out;
hlen = off + thlen;
if (skb_gro_header_hard(skb, hlen)) {
th = skb_gro_header_slow(skb, hlen, off);
if (unlikely(!th))
goto out;
}
skb_gro_pull(skb, thlen);
len = skb_gro_len(skb);
flags = tcp_flag_word(th);
for (; (p = *head); head = &p->next) {
if (!NAPI_GRO_CB(p)->same_flow)
continue;
th2 = tcp_hdr(p);
if (*(u32 *)&th->source ^ *(u32 *)&th2->source) {
NAPI_GRO_CB(p)->same_flow = 0;
continue;
}
goto found;
}
goto out_check_final;
found:
net-gre-gro: Add GRE support to the GRO stack This patch built on top of Commit 299603e8370a93dd5d8e8d800f0dff1ce2c53d36 ("net-gro: Prepare GRO stack for the upcoming tunneling support") to add the support of the standard GRE (RFC1701/RFC2784/RFC2890) to the GRO stack. It also serves as an example for supporting other encapsulation protocols in the GRO stack in the future. The patch supports version 0 and all the flags (key, csum, seq#) but will flush any pkt with the S (seq#) flag. This is because the S flag is not support by GSO, and a GRO pkt may end up in the forwarding path, thus requiring GSO support to break it up correctly. Currently the "packet_offload" structure only contains L3 (ETH_P_IP/ ETH_P_IPV6) GRO offload support so the encapped pkts are limited to IP pkts (i.e., w/o L2 hdr). But support for other protocol type can be easily added, so is the support for GRE variations like NVGRE. The patch also support csum offload. Specifically if the csum flag is on and the h/w is capable of checksumming the payload (CHECKSUM_COMPLETE), the code will take advantage of the csum computed by the h/w when validating the GRE csum. Note that commit 60769a5dcd8755715c7143b4571d5c44f01796f1 "ipv4: gre: add GRO capability" already introduces GRO capability to IPv4 GRE tunnels, using the gro_cells infrastructure. But GRO is done after GRE hdr has been removed (i.e., decapped). The following patch applies GRO when pkts first come in (before hitting the GRE tunnel code). There is some performance advantage for applying GRO as early as possible. Also this approach is transparent to other subsystem like Open vSwitch where GRE decap is handled outside of the IP stack hence making it harder for the gro_cells stuff to apply. On the other hand, some NICs are still not capable of hashing on the inner hdr of a GRE pkt (RSS). In that case the GRO processing of pkts from the same remote host will all happen on the same CPU and the performance may be suboptimal. I'm including some rough preliminary performance numbers below. Note that the performance will be highly dependent on traffic load, mix as usual. Moreover it also depends on NIC offload features hence the following is by no means a comprehesive study. Local testing and tuning will be needed to decide the best setting. All tests spawned 50 copies of netperf TCP_STREAM and ran for 30 secs. (super_netperf 50 -H 192.168.1.18 -l 30) An IP GRE tunnel with only the key flag on (e.g., ip tunnel add gre1 mode gre local 10.246.17.18 remote 10.246.17.17 ttl 255 key 123) is configured. The GRO support for pkts AFTER decap are controlled through the device feature of the GRE device (e.g., ethtool -K gre1 gro on/off). 1.1 ethtool -K gre1 gro off; ethtool -K eth0 gro off thruput: 9.16Gbps CPU utilization: 19% 1.2 ethtool -K gre1 gro on; ethtool -K eth0 gro off thruput: 5.9Gbps CPU utilization: 15% 1.3 ethtool -K gre1 gro off; ethtool -K eth0 gro on thruput: 9.26Gbps CPU utilization: 12-13% 1.4 ethtool -K gre1 gro on; ethtool -K eth0 gro on thruput: 9.26Gbps CPU utilization: 10% The following tests were performed on a different NIC that is capable of csum offload. I.e., the h/w is capable of computing IP payload csum (CHECKSUM_COMPLETE). 2.1 ethtool -K gre1 gro on (hence will use gro_cells) 2.1.1 ethtool -K eth0 gro off; csum offload disabled thruput: 8.53Gbps CPU utilization: 9% 2.1.2 ethtool -K eth0 gro off; csum offload enabled thruput: 8.97Gbps CPU utilization: 7-8% 2.1.3 ethtool -K eth0 gro on; csum offload disabled thruput: 8.83Gbps CPU utilization: 5-6% 2.1.4 ethtool -K eth0 gro on; csum offload enabled thruput: 8.98Gbps CPU utilization: 5% 2.2 ethtool -K gre1 gro off 2.2.1 ethtool -K eth0 gro off; csum offload disabled thruput: 5.93Gbps CPU utilization: 9% 2.2.2 ethtool -K eth0 gro off; csum offload enabled thruput: 5.62Gbps CPU utilization: 8% 2.2.3 ethtool -K eth0 gro on; csum offload disabled thruput: 7.69Gbps CPU utilization: 8% 2.2.4 ethtool -K eth0 gro on; csum offload enabled thruput: 8.96Gbps CPU utilization: 5-6% Signed-off-by: H.K. Jerry Chu <hkchu@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-07 11:23:19 -07:00
/* Include the IP ID check below from the inner most IP hdr */
flush = NAPI_GRO_CB(p)->flush | NAPI_GRO_CB(p)->flush_id;
flush |= (__force int)(flags & TCP_FLAG_CWR);
flush |= (__force int)((flags ^ tcp_flag_word(th2)) &
~(TCP_FLAG_CWR | TCP_FLAG_FIN | TCP_FLAG_PSH));
flush |= (__force int)(th->ack_seq ^ th2->ack_seq);
for (i = sizeof(*th); i < thlen; i += 4)
flush |= *(u32 *)((u8 *)th + i) ^
*(u32 *)((u8 *)th2 + i);
mss = tcp_skb_mss(p);
flush |= (len - 1) >= mss;
flush |= (ntohl(th2->seq) + skb_gro_len(p)) ^ ntohl(th->seq);
if (flush || skb_gro_receive(head, skb)) {
mss = 1;
goto out_check_final;
}
p = *head;
th2 = tcp_hdr(p);
tcp_flag_word(th2) |= flags & (TCP_FLAG_FIN | TCP_FLAG_PSH);
out_check_final:
flush = len < mss;
flush |= (__force int)(flags & (TCP_FLAG_URG | TCP_FLAG_PSH |
TCP_FLAG_RST | TCP_FLAG_SYN |
TCP_FLAG_FIN));
if (p && (!NAPI_GRO_CB(skb)->same_flow || flush))
pp = head;
out:
net-gre-gro: Add GRE support to the GRO stack This patch built on top of Commit 299603e8370a93dd5d8e8d800f0dff1ce2c53d36 ("net-gro: Prepare GRO stack for the upcoming tunneling support") to add the support of the standard GRE (RFC1701/RFC2784/RFC2890) to the GRO stack. It also serves as an example for supporting other encapsulation protocols in the GRO stack in the future. The patch supports version 0 and all the flags (key, csum, seq#) but will flush any pkt with the S (seq#) flag. This is because the S flag is not support by GSO, and a GRO pkt may end up in the forwarding path, thus requiring GSO support to break it up correctly. Currently the "packet_offload" structure only contains L3 (ETH_P_IP/ ETH_P_IPV6) GRO offload support so the encapped pkts are limited to IP pkts (i.e., w/o L2 hdr). But support for other protocol type can be easily added, so is the support for GRE variations like NVGRE. The patch also support csum offload. Specifically if the csum flag is on and the h/w is capable of checksumming the payload (CHECKSUM_COMPLETE), the code will take advantage of the csum computed by the h/w when validating the GRE csum. Note that commit 60769a5dcd8755715c7143b4571d5c44f01796f1 "ipv4: gre: add GRO capability" already introduces GRO capability to IPv4 GRE tunnels, using the gro_cells infrastructure. But GRO is done after GRE hdr has been removed (i.e., decapped). The following patch applies GRO when pkts first come in (before hitting the GRE tunnel code). There is some performance advantage for applying GRO as early as possible. Also this approach is transparent to other subsystem like Open vSwitch where GRE decap is handled outside of the IP stack hence making it harder for the gro_cells stuff to apply. On the other hand, some NICs are still not capable of hashing on the inner hdr of a GRE pkt (RSS). In that case the GRO processing of pkts from the same remote host will all happen on the same CPU and the performance may be suboptimal. I'm including some rough preliminary performance numbers below. Note that the performance will be highly dependent on traffic load, mix as usual. Moreover it also depends on NIC offload features hence the following is by no means a comprehesive study. Local testing and tuning will be needed to decide the best setting. All tests spawned 50 copies of netperf TCP_STREAM and ran for 30 secs. (super_netperf 50 -H 192.168.1.18 -l 30) An IP GRE tunnel with only the key flag on (e.g., ip tunnel add gre1 mode gre local 10.246.17.18 remote 10.246.17.17 ttl 255 key 123) is configured. The GRO support for pkts AFTER decap are controlled through the device feature of the GRE device (e.g., ethtool -K gre1 gro on/off). 1.1 ethtool -K gre1 gro off; ethtool -K eth0 gro off thruput: 9.16Gbps CPU utilization: 19% 1.2 ethtool -K gre1 gro on; ethtool -K eth0 gro off thruput: 5.9Gbps CPU utilization: 15% 1.3 ethtool -K gre1 gro off; ethtool -K eth0 gro on thruput: 9.26Gbps CPU utilization: 12-13% 1.4 ethtool -K gre1 gro on; ethtool -K eth0 gro on thruput: 9.26Gbps CPU utilization: 10% The following tests were performed on a different NIC that is capable of csum offload. I.e., the h/w is capable of computing IP payload csum (CHECKSUM_COMPLETE). 2.1 ethtool -K gre1 gro on (hence will use gro_cells) 2.1.1 ethtool -K eth0 gro off; csum offload disabled thruput: 8.53Gbps CPU utilization: 9% 2.1.2 ethtool -K eth0 gro off; csum offload enabled thruput: 8.97Gbps CPU utilization: 7-8% 2.1.3 ethtool -K eth0 gro on; csum offload disabled thruput: 8.83Gbps CPU utilization: 5-6% 2.1.4 ethtool -K eth0 gro on; csum offload enabled thruput: 8.98Gbps CPU utilization: 5% 2.2 ethtool -K gre1 gro off 2.2.1 ethtool -K eth0 gro off; csum offload disabled thruput: 5.93Gbps CPU utilization: 9% 2.2.2 ethtool -K eth0 gro off; csum offload enabled thruput: 5.62Gbps CPU utilization: 8% 2.2.3 ethtool -K eth0 gro on; csum offload disabled thruput: 7.69Gbps CPU utilization: 8% 2.2.4 ethtool -K eth0 gro on; csum offload enabled thruput: 8.96Gbps CPU utilization: 5-6% Signed-off-by: H.K. Jerry Chu <hkchu@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-07 11:23:19 -07:00
NAPI_GRO_CB(skb)->flush |= (flush != 0);
return pp;
}
int tcp_gro_complete(struct sk_buff *skb)
{
struct tcphdr *th = tcp_hdr(skb);
skb->csum_start = (unsigned char *)th - skb->head;
skb->csum_offset = offsetof(struct tcphdr, check);
skb->ip_summed = CHECKSUM_PARTIAL;
skb_shinfo(skb)->gso_segs = NAPI_GRO_CB(skb)->count;
if (th->cwr)
skb_shinfo(skb)->gso_type |= SKB_GSO_TCP_ECN;
return 0;
}
EXPORT_SYMBOL(tcp_gro_complete);
static int tcp_v4_gso_send_check(struct sk_buff *skb)
{
const struct iphdr *iph;
struct tcphdr *th;
if (!pskb_may_pull(skb, sizeof(*th)))
return -EINVAL;
iph = ip_hdr(skb);
th = tcp_hdr(skb);
th->check = 0;
skb->ip_summed = CHECKSUM_PARTIAL;
__tcp_v4_send_check(skb, iph->saddr, iph->daddr);
return 0;
}
static struct sk_buff **tcp4_gro_receive(struct sk_buff **head, struct sk_buff *skb)
{
/* Don't bother verifying checksum if we're going to flush anyway. */
if (!NAPI_GRO_CB(skb)->flush &&
skb_gro_checksum_validate(skb, IPPROTO_TCP,
inet_gro_compute_pseudo)) {
NAPI_GRO_CB(skb)->flush = 1;
return NULL;
}
return tcp_gro_receive(head, skb);
}
static int tcp4_gro_complete(struct sk_buff *skb, int thoff)
{
const struct iphdr *iph = ip_hdr(skb);
struct tcphdr *th = tcp_hdr(skb);
th->check = ~tcp_v4_check(skb->len - thoff, iph->saddr,
iph->daddr, 0);
skb_shinfo(skb)->gso_type |= SKB_GSO_TCPV4;
return tcp_gro_complete(skb);
}
static const struct net_offload tcpv4_offload = {
.callbacks = {
.gso_send_check = tcp_v4_gso_send_check,
.gso_segment = tcp_gso_segment,
.gro_receive = tcp4_gro_receive,
.gro_complete = tcp4_gro_complete,
},
};
int __init tcpv4_offload_init(void)
{
return inet_add_offload(&tcpv4_offload, IPPROTO_TCP);
}