1
0
Fork 0
alistair23-linux/drivers/net/ethernet/intel/i40e/i40e_txrx.c

2994 lines
82 KiB
C
Raw Normal View History

/*******************************************************************************
*
* Intel Ethernet Controller XL710 Family Linux Driver
* Copyright(c) 2013 - 2016 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along
* with this program. If not, see <http://www.gnu.org/licenses/>.
*
* The full GNU General Public License is included in this distribution in
* the file called "COPYING".
*
* Contact Information:
* e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*
******************************************************************************/
#include <linux/prefetch.h>
#include <net/busy_poll.h>
#include "i40e.h"
#include "i40e_prototype.h"
static inline __le64 build_ctob(u32 td_cmd, u32 td_offset, unsigned int size,
u32 td_tag)
{
return cpu_to_le64(I40E_TX_DESC_DTYPE_DATA |
((u64)td_cmd << I40E_TXD_QW1_CMD_SHIFT) |
((u64)td_offset << I40E_TXD_QW1_OFFSET_SHIFT) |
((u64)size << I40E_TXD_QW1_TX_BUF_SZ_SHIFT) |
((u64)td_tag << I40E_TXD_QW1_L2TAG1_SHIFT));
}
#define I40E_TXD_CMD (I40E_TX_DESC_CMD_EOP | I40E_TX_DESC_CMD_RS)
#define I40E_FD_CLEAN_DELAY 10
/**
* i40e_program_fdir_filter - Program a Flow Director filter
* @fdir_data: Packet data that will be filter parameters
* @raw_packet: the pre-allocated packet buffer for FDir
* @pf: The PF pointer
* @add: True for add/update, False for remove
**/
int i40e_program_fdir_filter(struct i40e_fdir_filter *fdir_data, u8 *raw_packet,
struct i40e_pf *pf, bool add)
{
struct i40e_filter_program_desc *fdir_desc;
struct i40e_tx_buffer *tx_buf, *first;
struct i40e_tx_desc *tx_desc;
struct i40e_ring *tx_ring;
unsigned int fpt, dcc;
struct i40e_vsi *vsi;
struct device *dev;
dma_addr_t dma;
u32 td_cmd = 0;
u16 delay = 0;
u16 i;
/* find existing FDIR VSI */
vsi = NULL;
for (i = 0; i < pf->num_alloc_vsi; i++)
if (pf->vsi[i] && pf->vsi[i]->type == I40E_VSI_FDIR)
vsi = pf->vsi[i];
if (!vsi)
return -ENOENT;
tx_ring = vsi->tx_rings[0];
dev = tx_ring->dev;
/* we need two descriptors to add/del a filter and we can wait */
do {
if (I40E_DESC_UNUSED(tx_ring) > 1)
break;
msleep_interruptible(1);
delay++;
} while (delay < I40E_FD_CLEAN_DELAY);
if (!(I40E_DESC_UNUSED(tx_ring) > 1))
return -EAGAIN;
dma = dma_map_single(dev, raw_packet,
I40E_FDIR_MAX_RAW_PACKET_SIZE, DMA_TO_DEVICE);
if (dma_mapping_error(dev, dma))
goto dma_fail;
/* grab the next descriptor */
i = tx_ring->next_to_use;
fdir_desc = I40E_TX_FDIRDESC(tx_ring, i);
first = &tx_ring->tx_bi[i];
memset(first, 0, sizeof(struct i40e_tx_buffer));
tx_ring->next_to_use = ((i + 1) < tx_ring->count) ? i + 1 : 0;
fpt = (fdir_data->q_index << I40E_TXD_FLTR_QW0_QINDEX_SHIFT) &
I40E_TXD_FLTR_QW0_QINDEX_MASK;
fpt |= (fdir_data->flex_off << I40E_TXD_FLTR_QW0_FLEXOFF_SHIFT) &
I40E_TXD_FLTR_QW0_FLEXOFF_MASK;
fpt |= (fdir_data->pctype << I40E_TXD_FLTR_QW0_PCTYPE_SHIFT) &
I40E_TXD_FLTR_QW0_PCTYPE_MASK;
/* Use LAN VSI Id if not programmed by user */
if (fdir_data->dest_vsi == 0)
fpt |= (pf->vsi[pf->lan_vsi]->id) <<
I40E_TXD_FLTR_QW0_DEST_VSI_SHIFT;
else
fpt |= ((u32)fdir_data->dest_vsi <<
I40E_TXD_FLTR_QW0_DEST_VSI_SHIFT) &
I40E_TXD_FLTR_QW0_DEST_VSI_MASK;
dcc = I40E_TX_DESC_DTYPE_FILTER_PROG;
if (add)
dcc |= I40E_FILTER_PROGRAM_DESC_PCMD_ADD_UPDATE <<
I40E_TXD_FLTR_QW1_PCMD_SHIFT;
else
dcc |= I40E_FILTER_PROGRAM_DESC_PCMD_REMOVE <<
I40E_TXD_FLTR_QW1_PCMD_SHIFT;
dcc |= (fdir_data->dest_ctl << I40E_TXD_FLTR_QW1_DEST_SHIFT) &
I40E_TXD_FLTR_QW1_DEST_MASK;
dcc |= (fdir_data->fd_status << I40E_TXD_FLTR_QW1_FD_STATUS_SHIFT) &
I40E_TXD_FLTR_QW1_FD_STATUS_MASK;
if (fdir_data->cnt_index != 0) {
dcc |= I40E_TXD_FLTR_QW1_CNT_ENA_MASK;
dcc |= ((u32)fdir_data->cnt_index <<
I40E_TXD_FLTR_QW1_CNTINDEX_SHIFT) &
I40E_TXD_FLTR_QW1_CNTINDEX_MASK;
}
fdir_desc->qindex_flex_ptype_vsi = cpu_to_le32(fpt);
fdir_desc->rsvd = cpu_to_le32(0);
fdir_desc->dtype_cmd_cntindex = cpu_to_le32(dcc);
fdir_desc->fd_id = cpu_to_le32(fdir_data->fd_id);
/* Now program a dummy descriptor */
i = tx_ring->next_to_use;
tx_desc = I40E_TX_DESC(tx_ring, i);
tx_buf = &tx_ring->tx_bi[i];
tx_ring->next_to_use = ((i + 1) < tx_ring->count) ? i + 1 : 0;
memset(tx_buf, 0, sizeof(struct i40e_tx_buffer));
/* record length, and DMA address */
dma_unmap_len_set(tx_buf, len, I40E_FDIR_MAX_RAW_PACKET_SIZE);
dma_unmap_addr_set(tx_buf, dma, dma);
tx_desc->buffer_addr = cpu_to_le64(dma);
td_cmd = I40E_TXD_CMD | I40E_TX_DESC_CMD_DUMMY;
tx_buf->tx_flags = I40E_TX_FLAGS_FD_SB;
tx_buf->raw_buf = (void *)raw_packet;
tx_desc->cmd_type_offset_bsz =
build_ctob(td_cmd, 0, I40E_FDIR_MAX_RAW_PACKET_SIZE, 0);
/* Force memory writes to complete before letting h/w
* know there are new descriptors to fetch.
*/
wmb();
/* Mark the data descriptor to be watched */
first->next_to_watch = tx_desc;
writel(tx_ring->next_to_use, tx_ring->tail);
return 0;
dma_fail:
return -1;
}
#define IP_HEADER_OFFSET 14
#define I40E_UDPIP_DUMMY_PACKET_LEN 42
/**
* i40e_add_del_fdir_udpv4 - Add/Remove UDPv4 filters
* @vsi: pointer to the targeted VSI
* @fd_data: the flow director data required for the FDir descriptor
* @add: true adds a filter, false removes it
*
* Returns 0 if the filters were successfully added or removed
**/
static int i40e_add_del_fdir_udpv4(struct i40e_vsi *vsi,
struct i40e_fdir_filter *fd_data,
bool add)
{
struct i40e_pf *pf = vsi->back;
struct udphdr *udp;
struct iphdr *ip;
bool err = false;
u8 *raw_packet;
int ret;
static char packet[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x08, 0,
0x45, 0, 0, 0x1c, 0, 0, 0x40, 0, 0x40, 0x11, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
raw_packet = kzalloc(I40E_FDIR_MAX_RAW_PACKET_SIZE, GFP_KERNEL);
if (!raw_packet)
return -ENOMEM;
memcpy(raw_packet, packet, I40E_UDPIP_DUMMY_PACKET_LEN);
ip = (struct iphdr *)(raw_packet + IP_HEADER_OFFSET);
udp = (struct udphdr *)(raw_packet + IP_HEADER_OFFSET
+ sizeof(struct iphdr));
ip->daddr = fd_data->dst_ip[0];
udp->dest = fd_data->dst_port;
ip->saddr = fd_data->src_ip[0];
udp->source = fd_data->src_port;
fd_data->pctype = I40E_FILTER_PCTYPE_NONF_IPV4_UDP;
ret = i40e_program_fdir_filter(fd_data, raw_packet, pf, add);
if (ret) {
dev_info(&pf->pdev->dev,
"PCTYPE:%d, Filter command send failed for fd_id:%d (ret = %d)\n",
fd_data->pctype, fd_data->fd_id, ret);
err = true;
} else if (I40E_DEBUG_FD & pf->hw.debug_mask) {
if (add)
dev_info(&pf->pdev->dev,
"Filter OK for PCTYPE %d loc = %d\n",
fd_data->pctype, fd_data->fd_id);
else
dev_info(&pf->pdev->dev,
"Filter deleted for PCTYPE %d loc = %d\n",
fd_data->pctype, fd_data->fd_id);
}
if (err)
kfree(raw_packet);
return err ? -EOPNOTSUPP : 0;
}
#define I40E_TCPIP_DUMMY_PACKET_LEN 54
/**
* i40e_add_del_fdir_tcpv4 - Add/Remove TCPv4 filters
* @vsi: pointer to the targeted VSI
* @fd_data: the flow director data required for the FDir descriptor
* @add: true adds a filter, false removes it
*
* Returns 0 if the filters were successfully added or removed
**/
static int i40e_add_del_fdir_tcpv4(struct i40e_vsi *vsi,
struct i40e_fdir_filter *fd_data,
bool add)
{
struct i40e_pf *pf = vsi->back;
struct tcphdr *tcp;
struct iphdr *ip;
bool err = false;
u8 *raw_packet;
int ret;
/* Dummy packet */
static char packet[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x08, 0,
0x45, 0, 0, 0x28, 0, 0, 0x40, 0, 0x40, 0x6, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x80, 0x11,
0x0, 0x72, 0, 0, 0, 0};
raw_packet = kzalloc(I40E_FDIR_MAX_RAW_PACKET_SIZE, GFP_KERNEL);
if (!raw_packet)
return -ENOMEM;
memcpy(raw_packet, packet, I40E_TCPIP_DUMMY_PACKET_LEN);
ip = (struct iphdr *)(raw_packet + IP_HEADER_OFFSET);
tcp = (struct tcphdr *)(raw_packet + IP_HEADER_OFFSET
+ sizeof(struct iphdr));
ip->daddr = fd_data->dst_ip[0];
tcp->dest = fd_data->dst_port;
ip->saddr = fd_data->src_ip[0];
tcp->source = fd_data->src_port;
if (add) {
pf->fd_tcp_rule++;
if (pf->flags & I40E_FLAG_FD_ATR_ENABLED) {
if (I40E_DEBUG_FD & pf->hw.debug_mask)
dev_info(&pf->pdev->dev, "Forcing ATR off, sideband rules for TCP/IPv4 flow being applied\n");
pf->flags &= ~I40E_FLAG_FD_ATR_ENABLED;
}
} else {
pf->fd_tcp_rule = (pf->fd_tcp_rule > 0) ?
(pf->fd_tcp_rule - 1) : 0;
if (pf->fd_tcp_rule == 0) {
pf->flags |= I40E_FLAG_FD_ATR_ENABLED;
if (I40E_DEBUG_FD & pf->hw.debug_mask)
dev_info(&pf->pdev->dev, "ATR re-enabled due to no sideband TCP/IPv4 rules\n");
}
}
fd_data->pctype = I40E_FILTER_PCTYPE_NONF_IPV4_TCP;
ret = i40e_program_fdir_filter(fd_data, raw_packet, pf, add);
if (ret) {
dev_info(&pf->pdev->dev,
"PCTYPE:%d, Filter command send failed for fd_id:%d (ret = %d)\n",
fd_data->pctype, fd_data->fd_id, ret);
err = true;
} else if (I40E_DEBUG_FD & pf->hw.debug_mask) {
if (add)
dev_info(&pf->pdev->dev, "Filter OK for PCTYPE %d loc = %d)\n",
fd_data->pctype, fd_data->fd_id);
else
dev_info(&pf->pdev->dev,
"Filter deleted for PCTYPE %d loc = %d\n",
fd_data->pctype, fd_data->fd_id);
}
if (err)
kfree(raw_packet);
return err ? -EOPNOTSUPP : 0;
}
/**
* i40e_add_del_fdir_sctpv4 - Add/Remove SCTPv4 Flow Director filters for
* a specific flow spec
* @vsi: pointer to the targeted VSI
* @fd_data: the flow director data required for the FDir descriptor
* @add: true adds a filter, false removes it
*
* Returns 0 if the filters were successfully added or removed
**/
static int i40e_add_del_fdir_sctpv4(struct i40e_vsi *vsi,
struct i40e_fdir_filter *fd_data,
bool add)
{
return -EOPNOTSUPP;
}
#define I40E_IP_DUMMY_PACKET_LEN 34
/**
* i40e_add_del_fdir_ipv4 - Add/Remove IPv4 Flow Director filters for
* a specific flow spec
* @vsi: pointer to the targeted VSI
* @fd_data: the flow director data required for the FDir descriptor
* @add: true adds a filter, false removes it
*
* Returns 0 if the filters were successfully added or removed
**/
static int i40e_add_del_fdir_ipv4(struct i40e_vsi *vsi,
struct i40e_fdir_filter *fd_data,
bool add)
{
struct i40e_pf *pf = vsi->back;
struct iphdr *ip;
bool err = false;
u8 *raw_packet;
int ret;
int i;
static char packet[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x08, 0,
0x45, 0, 0, 0x14, 0, 0, 0x40, 0, 0x40, 0x10, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0};
for (i = I40E_FILTER_PCTYPE_NONF_IPV4_OTHER;
i <= I40E_FILTER_PCTYPE_FRAG_IPV4; i++) {
raw_packet = kzalloc(I40E_FDIR_MAX_RAW_PACKET_SIZE, GFP_KERNEL);
if (!raw_packet)
return -ENOMEM;
memcpy(raw_packet, packet, I40E_IP_DUMMY_PACKET_LEN);
ip = (struct iphdr *)(raw_packet + IP_HEADER_OFFSET);
ip->saddr = fd_data->src_ip[0];
ip->daddr = fd_data->dst_ip[0];
ip->protocol = 0;
fd_data->pctype = i;
ret = i40e_program_fdir_filter(fd_data, raw_packet, pf, add);
if (ret) {
dev_info(&pf->pdev->dev,
"PCTYPE:%d, Filter command send failed for fd_id:%d (ret = %d)\n",
fd_data->pctype, fd_data->fd_id, ret);
err = true;
} else if (I40E_DEBUG_FD & pf->hw.debug_mask) {
if (add)
dev_info(&pf->pdev->dev,
"Filter OK for PCTYPE %d loc = %d\n",
fd_data->pctype, fd_data->fd_id);
else
dev_info(&pf->pdev->dev,
"Filter deleted for PCTYPE %d loc = %d\n",
fd_data->pctype, fd_data->fd_id);
}
}
if (err)
kfree(raw_packet);
return err ? -EOPNOTSUPP : 0;
}
/**
* i40e_add_del_fdir - Build raw packets to add/del fdir filter
* @vsi: pointer to the targeted VSI
* @cmd: command to get or set RX flow classification rules
* @add: true adds a filter, false removes it
*
**/
int i40e_add_del_fdir(struct i40e_vsi *vsi,
struct i40e_fdir_filter *input, bool add)
{
struct i40e_pf *pf = vsi->back;
int ret;
switch (input->flow_type & ~FLOW_EXT) {
case TCP_V4_FLOW:
ret = i40e_add_del_fdir_tcpv4(vsi, input, add);
break;
case UDP_V4_FLOW:
ret = i40e_add_del_fdir_udpv4(vsi, input, add);
break;
case SCTP_V4_FLOW:
ret = i40e_add_del_fdir_sctpv4(vsi, input, add);
break;
case IPV4_FLOW:
ret = i40e_add_del_fdir_ipv4(vsi, input, add);
break;
case IP_USER_FLOW:
switch (input->ip4_proto) {
case IPPROTO_TCP:
ret = i40e_add_del_fdir_tcpv4(vsi, input, add);
break;
case IPPROTO_UDP:
ret = i40e_add_del_fdir_udpv4(vsi, input, add);
break;
case IPPROTO_SCTP:
ret = i40e_add_del_fdir_sctpv4(vsi, input, add);
break;
default:
ret = i40e_add_del_fdir_ipv4(vsi, input, add);
break;
}
break;
default:
dev_info(&pf->pdev->dev, "Could not specify spec type %d\n",
input->flow_type);
ret = -EINVAL;
}
/* The buffer allocated here is freed by the i40e_clean_tx_ring() */
return ret;
}
/**
* i40e_fd_handle_status - check the Programming Status for FD
* @rx_ring: the Rx ring for this descriptor
* @rx_desc: the Rx descriptor for programming Status, not a packet descriptor.
* @prog_id: the id originally used for programming
*
* This is used to verify if the FD programming or invalidation
* requested by SW to the HW is successful or not and take actions accordingly.
**/
static void i40e_fd_handle_status(struct i40e_ring *rx_ring,
union i40e_rx_desc *rx_desc, u8 prog_id)
{
struct i40e_pf *pf = rx_ring->vsi->back;
struct pci_dev *pdev = pf->pdev;
u32 fcnt_prog, fcnt_avail;
u32 error;
u64 qw;
qw = le64_to_cpu(rx_desc->wb.qword1.status_error_len);
error = (qw & I40E_RX_PROG_STATUS_DESC_QW1_ERROR_MASK) >>
I40E_RX_PROG_STATUS_DESC_QW1_ERROR_SHIFT;
if (error == BIT(I40E_RX_PROG_STATUS_DESC_FD_TBL_FULL_SHIFT)) {
pf->fd_inv = le32_to_cpu(rx_desc->wb.qword0.hi_dword.fd_id);
if ((rx_desc->wb.qword0.hi_dword.fd_id != 0) ||
(I40E_DEBUG_FD & pf->hw.debug_mask))
dev_warn(&pdev->dev, "ntuple filter loc = %d, could not be added\n",
pf->fd_inv);
/* Check if the programming error is for ATR.
* If so, auto disable ATR and set a state for
* flush in progress. Next time we come here if flush is in
* progress do nothing, once flush is complete the state will
* be cleared.
*/
if (test_bit(__I40E_FD_FLUSH_REQUESTED, &pf->state))
return;
pf->fd_add_err++;
/* store the current atr filter count */
pf->fd_atr_cnt = i40e_get_current_atr_cnt(pf);
if ((rx_desc->wb.qword0.hi_dword.fd_id == 0) &&
(pf->auto_disable_flags & I40E_FLAG_FD_SB_ENABLED)) {
pf->auto_disable_flags |= I40E_FLAG_FD_ATR_ENABLED;
set_bit(__I40E_FD_FLUSH_REQUESTED, &pf->state);
}
/* filter programming failed most likely due to table full */
fcnt_prog = i40e_get_global_fd_count(pf);
fcnt_avail = pf->fdir_pf_filter_count;
/* If ATR is running fcnt_prog can quickly change,
* if we are very close to full, it makes sense to disable
* FD ATR/SB and then re-enable it when there is room.
*/
if (fcnt_prog >= (fcnt_avail - I40E_FDIR_BUFFER_FULL_MARGIN)) {
if ((pf->flags & I40E_FLAG_FD_SB_ENABLED) &&
!(pf->auto_disable_flags &
I40E_FLAG_FD_SB_ENABLED)) {
if (I40E_DEBUG_FD & pf->hw.debug_mask)
dev_warn(&pdev->dev, "FD filter space full, new ntuple rules will not be added\n");
pf->auto_disable_flags |=
I40E_FLAG_FD_SB_ENABLED;
}
}
} else if (error == BIT(I40E_RX_PROG_STATUS_DESC_NO_FD_ENTRY_SHIFT)) {
if (I40E_DEBUG_FD & pf->hw.debug_mask)
dev_info(&pdev->dev, "ntuple filter fd_id = %d, could not be removed\n",
rx_desc->wb.qword0.hi_dword.fd_id);
}
}
/**
* i40e_unmap_and_free_tx_resource - Release a Tx buffer
* @ring: the ring that owns the buffer
* @tx_buffer: the buffer to free
**/
static void i40e_unmap_and_free_tx_resource(struct i40e_ring *ring,
struct i40e_tx_buffer *tx_buffer)
{
if (tx_buffer->skb) {
dev_kfree_skb_any(tx_buffer->skb);
if (dma_unmap_len(tx_buffer, len))
dma_unmap_single(ring->dev,
dma_unmap_addr(tx_buffer, dma),
dma_unmap_len(tx_buffer, len),
DMA_TO_DEVICE);
} else if (dma_unmap_len(tx_buffer, len)) {
dma_unmap_page(ring->dev,
dma_unmap_addr(tx_buffer, dma),
dma_unmap_len(tx_buffer, len),
DMA_TO_DEVICE);
}
if (tx_buffer->tx_flags & I40E_TX_FLAGS_FD_SB)
kfree(tx_buffer->raw_buf);
tx_buffer->next_to_watch = NULL;
tx_buffer->skb = NULL;
dma_unmap_len_set(tx_buffer, len, 0);
/* tx_buffer must be completely set up in the transmit path */
}
/**
* i40e_clean_tx_ring - Free any empty Tx buffers
* @tx_ring: ring to be cleaned
**/
void i40e_clean_tx_ring(struct i40e_ring *tx_ring)
{
unsigned long bi_size;
u16 i;
/* ring already cleared, nothing to do */
if (!tx_ring->tx_bi)
return;
/* Free all the Tx ring sk_buffs */
for (i = 0; i < tx_ring->count; i++)
i40e_unmap_and_free_tx_resource(tx_ring, &tx_ring->tx_bi[i]);
bi_size = sizeof(struct i40e_tx_buffer) * tx_ring->count;
memset(tx_ring->tx_bi, 0, bi_size);
/* Zero out the descriptor ring */
memset(tx_ring->desc, 0, tx_ring->size);
tx_ring->next_to_use = 0;
tx_ring->next_to_clean = 0;
if (!tx_ring->netdev)
return;
/* cleanup Tx queue statistics */
netdev_tx_reset_queue(netdev_get_tx_queue(tx_ring->netdev,
tx_ring->queue_index));
}
/**
* i40e_free_tx_resources - Free Tx resources per queue
* @tx_ring: Tx descriptor ring for a specific queue
*
* Free all transmit software resources
**/
void i40e_free_tx_resources(struct i40e_ring *tx_ring)
{
i40e_clean_tx_ring(tx_ring);
kfree(tx_ring->tx_bi);
tx_ring->tx_bi = NULL;
if (tx_ring->desc) {
dma_free_coherent(tx_ring->dev, tx_ring->size,
tx_ring->desc, tx_ring->dma);
tx_ring->desc = NULL;
}
}
/**
* i40e_get_tx_pending - how many tx descriptors not processed
* @tx_ring: the ring of descriptors
* @in_sw: is tx_pending being checked in SW or HW
*
* Since there is no access to the ring head register
* in XL710, we need to use our local copies
**/
u32 i40e_get_tx_pending(struct i40e_ring *ring, bool in_sw)
{
u32 head, tail;
if (!in_sw)
head = i40e_get_head(ring);
else
head = ring->next_to_clean;
tail = readl(ring->tail);
if (head != tail)
return (head < tail) ?
tail - head : (tail + ring->count - head);
return 0;
}
#define WB_STRIDE 0x3
/**
* i40e_clean_tx_irq - Reclaim resources after transmit completes
* @tx_ring: tx ring to clean
* @budget: how many cleans we're allowed
*
* Returns true if there's any budget left (e.g. the clean is finished)
**/
static bool i40e_clean_tx_irq(struct i40e_ring *tx_ring, int budget)
{
u16 i = tx_ring->next_to_clean;
struct i40e_tx_buffer *tx_buf;
struct i40e_tx_desc *tx_head;
struct i40e_tx_desc *tx_desc;
unsigned int total_packets = 0;
unsigned int total_bytes = 0;
tx_buf = &tx_ring->tx_bi[i];
tx_desc = I40E_TX_DESC(tx_ring, i);
i -= tx_ring->count;
tx_head = I40E_TX_DESC(tx_ring, i40e_get_head(tx_ring));
do {
struct i40e_tx_desc *eop_desc = tx_buf->next_to_watch;
/* if next_to_watch is not set then there is no work pending */
if (!eop_desc)
break;
/* prevent any other reads prior to eop_desc */
read_barrier_depends();
/* we have caught up to head, no work left to do */
if (tx_head == tx_desc)
break;
/* clear next_to_watch to prevent false hangs */
tx_buf->next_to_watch = NULL;
/* update the statistics for this packet */
total_bytes += tx_buf->bytecount;
total_packets += tx_buf->gso_segs;
/* free the skb */
dev_consume_skb_any(tx_buf->skb);
/* unmap skb header data */
dma_unmap_single(tx_ring->dev,
dma_unmap_addr(tx_buf, dma),
dma_unmap_len(tx_buf, len),
DMA_TO_DEVICE);
/* clear tx_buffer data */
tx_buf->skb = NULL;
dma_unmap_len_set(tx_buf, len, 0);
/* unmap remaining buffers */
while (tx_desc != eop_desc) {
tx_buf++;
tx_desc++;
i++;
if (unlikely(!i)) {
i -= tx_ring->count;
tx_buf = tx_ring->tx_bi;
tx_desc = I40E_TX_DESC(tx_ring, 0);
}
/* unmap any remaining paged data */
if (dma_unmap_len(tx_buf, len)) {
dma_unmap_page(tx_ring->dev,
dma_unmap_addr(tx_buf, dma),
dma_unmap_len(tx_buf, len),
DMA_TO_DEVICE);
dma_unmap_len_set(tx_buf, len, 0);
}
}
/* move us one more past the eop_desc for start of next pkt */
tx_buf++;
tx_desc++;
i++;
if (unlikely(!i)) {
i -= tx_ring->count;
tx_buf = tx_ring->tx_bi;
tx_desc = I40E_TX_DESC(tx_ring, 0);
}
prefetch(tx_desc);
/* update budget accounting */
budget--;
} while (likely(budget));
i += tx_ring->count;
tx_ring->next_to_clean = i;
u64_stats_update_begin(&tx_ring->syncp);
tx_ring->stats.bytes += total_bytes;
tx_ring->stats.packets += total_packets;
u64_stats_update_end(&tx_ring->syncp);
tx_ring->q_vector->tx.total_bytes += total_bytes;
tx_ring->q_vector->tx.total_packets += total_packets;
if (tx_ring->flags & I40E_TXR_FLAGS_WB_ON_ITR) {
unsigned int j = 0;
/* check to see if there are < 4 descriptors
* waiting to be written back, then kick the hardware to force
* them to be written back in case we stay in NAPI.
* In this mode on X722 we do not enable Interrupt.
*/
j = i40e_get_tx_pending(tx_ring, false);
if (budget &&
((j / (WB_STRIDE + 1)) == 0) && (j != 0) &&
!test_bit(__I40E_DOWN, &tx_ring->vsi->state) &&
(I40E_DESC_UNUSED(tx_ring) != tx_ring->count))
tx_ring->arm_wb = true;
}
netdev_tx_completed_queue(netdev_get_tx_queue(tx_ring->netdev,
tx_ring->queue_index),
total_packets, total_bytes);
#define TX_WAKE_THRESHOLD (DESC_NEEDED * 2)
if (unlikely(total_packets && netif_carrier_ok(tx_ring->netdev) &&
(I40E_DESC_UNUSED(tx_ring) >= TX_WAKE_THRESHOLD))) {
/* Make sure that anybody stopping the queue after this
* sees the new next_to_clean.
*/
smp_mb();
if (__netif_subqueue_stopped(tx_ring->netdev,
tx_ring->queue_index) &&
!test_bit(__I40E_DOWN, &tx_ring->vsi->state)) {
netif_wake_subqueue(tx_ring->netdev,
tx_ring->queue_index);
++tx_ring->tx_stats.restart_queue;
}
}
return !!budget;
}
/**
* i40e_enable_wb_on_itr - Arm hardware to do a wb, interrupts are not enabled
* @vsi: the VSI we care about
* @q_vector: the vector on which to enable writeback
*
**/
static void i40e_enable_wb_on_itr(struct i40e_vsi *vsi,
struct i40e_q_vector *q_vector)
{
u16 flags = q_vector->tx.ring[0].flags;
u32 val;
if (!(flags & I40E_TXR_FLAGS_WB_ON_ITR))
return;
if (q_vector->arm_wb_state)
return;
if (vsi->back->flags & I40E_FLAG_MSIX_ENABLED) {
val = I40E_PFINT_DYN_CTLN_WB_ON_ITR_MASK |
I40E_PFINT_DYN_CTLN_ITR_INDX_MASK; /* set noitr */
wr32(&vsi->back->hw,
I40E_PFINT_DYN_CTLN(q_vector->v_idx + vsi->base_vector - 1),
val);
} else {
val = I40E_PFINT_DYN_CTL0_WB_ON_ITR_MASK |
I40E_PFINT_DYN_CTL0_ITR_INDX_MASK; /* set noitr */
wr32(&vsi->back->hw, I40E_PFINT_DYN_CTL0, val);
}
q_vector->arm_wb_state = true;
}
/**
* i40e_force_wb - Issue SW Interrupt so HW does a wb
* @vsi: the VSI we care about
* @q_vector: the vector on which to force writeback
*
**/
void i40e_force_wb(struct i40e_vsi *vsi, struct i40e_q_vector *q_vector)
{
if (vsi->back->flags & I40E_FLAG_MSIX_ENABLED) {
u32 val = I40E_PFINT_DYN_CTLN_INTENA_MASK |
I40E_PFINT_DYN_CTLN_ITR_INDX_MASK | /* set noitr */
I40E_PFINT_DYN_CTLN_SWINT_TRIG_MASK |
I40E_PFINT_DYN_CTLN_SW_ITR_INDX_ENA_MASK;
/* allow 00 to be written to the index */
wr32(&vsi->back->hw,
I40E_PFINT_DYN_CTLN(q_vector->v_idx +
vsi->base_vector - 1), val);
} else {
u32 val = I40E_PFINT_DYN_CTL0_INTENA_MASK |
I40E_PFINT_DYN_CTL0_ITR_INDX_MASK | /* set noitr */
I40E_PFINT_DYN_CTL0_SWINT_TRIG_MASK |
I40E_PFINT_DYN_CTL0_SW_ITR_INDX_ENA_MASK;
/* allow 00 to be written to the index */
wr32(&vsi->back->hw, I40E_PFINT_DYN_CTL0, val);
}
}
/**
* i40e_set_new_dynamic_itr - Find new ITR level
* @rc: structure containing ring performance data
*
* Returns true if ITR changed, false if not
*
* Stores a new ITR value based on packets and byte counts during
* the last interrupt. The advantage of per interrupt computation
* is faster updates and more accurate ITR for the current traffic
* pattern. Constants in this function were computed based on
* theoretical maximum wire speed and thresholds were set based on
* testing data as well as attempting to minimize response time
* while increasing bulk throughput.
**/
static bool i40e_set_new_dynamic_itr(struct i40e_ring_container *rc)
{
enum i40e_latency_range new_latency_range = rc->latency_range;
struct i40e_q_vector *qv = rc->ring->q_vector;
u32 new_itr = rc->itr;
int bytes_per_int;
int usecs;
if (rc->total_packets == 0 || !rc->itr)
return false;
/* simple throttlerate management
* 0-10MB/s lowest (50000 ints/s)
* 10-20MB/s low (20000 ints/s)
* 20-1249MB/s bulk (18000 ints/s)
* > 40000 Rx packets per second (8000 ints/s)
*
* The math works out because the divisor is in 10^(-6) which
* turns the bytes/us input value into MB/s values, but
* make sure to use usecs, as the register values written
* are in 2 usec increments in the ITR registers, and make sure
* to use the smoothed values that the countdown timer gives us.
*/
usecs = (rc->itr << 1) * ITR_COUNTDOWN_START;
bytes_per_int = rc->total_bytes / usecs;
switch (new_latency_range) {
case I40E_LOWEST_LATENCY:
if (bytes_per_int > 10)
new_latency_range = I40E_LOW_LATENCY;
break;
case I40E_LOW_LATENCY:
if (bytes_per_int > 20)
new_latency_range = I40E_BULK_LATENCY;
else if (bytes_per_int <= 10)
new_latency_range = I40E_LOWEST_LATENCY;
break;
case I40E_BULK_LATENCY:
case I40E_ULTRA_LATENCY:
default:
if (bytes_per_int <= 20)
new_latency_range = I40E_LOW_LATENCY;
break;
}
/* this is to adjust RX more aggressively when streaming small
* packets. The value of 40000 was picked as it is just beyond
* what the hardware can receive per second if in low latency
* mode.
*/
#define RX_ULTRA_PACKET_RATE 40000
if ((((rc->total_packets * 1000000) / usecs) > RX_ULTRA_PACKET_RATE) &&
(&qv->rx == rc))
new_latency_range = I40E_ULTRA_LATENCY;
rc->latency_range = new_latency_range;
switch (new_latency_range) {
case I40E_LOWEST_LATENCY:
new_itr = I40E_ITR_50K;
break;
case I40E_LOW_LATENCY:
new_itr = I40E_ITR_20K;
break;
case I40E_BULK_LATENCY:
new_itr = I40E_ITR_18K;
break;
case I40E_ULTRA_LATENCY:
new_itr = I40E_ITR_8K;
break;
default:
break;
}
rc->total_bytes = 0;
rc->total_packets = 0;
if (new_itr != rc->itr) {
rc->itr = new_itr;
return true;
}
return false;
}
/**
* i40e_clean_programming_status - clean the programming status descriptor
* @rx_ring: the rx ring that has this descriptor
* @rx_desc: the rx descriptor written back by HW
*
* Flow director should handle FD_FILTER_STATUS to check its filter programming
* status being successful or not and take actions accordingly. FCoE should
* handle its context/filter programming/invalidation status and take actions.
*
**/
static void i40e_clean_programming_status(struct i40e_ring *rx_ring,
union i40e_rx_desc *rx_desc)
{
u64 qw;
u8 id;
qw = le64_to_cpu(rx_desc->wb.qword1.status_error_len);
id = (qw & I40E_RX_PROG_STATUS_DESC_QW1_PROGID_MASK) >>
I40E_RX_PROG_STATUS_DESC_QW1_PROGID_SHIFT;
if (id == I40E_RX_PROG_STATUS_DESC_FD_FILTER_STATUS)
i40e_fd_handle_status(rx_ring, rx_desc, id);
#ifdef I40E_FCOE
else if ((id == I40E_RX_PROG_STATUS_DESC_FCOE_CTXT_PROG_STATUS) ||
(id == I40E_RX_PROG_STATUS_DESC_FCOE_CTXT_INVL_STATUS))
i40e_fcoe_handle_status(rx_ring, rx_desc, id);
#endif
}
/**
* i40e_setup_tx_descriptors - Allocate the Tx descriptors
* @tx_ring: the tx ring to set up
*
* Return 0 on success, negative on error
**/
int i40e_setup_tx_descriptors(struct i40e_ring *tx_ring)
{
struct device *dev = tx_ring->dev;
int bi_size;
if (!dev)
return -ENOMEM;
/* warn if we are about to overwrite the pointer */
WARN_ON(tx_ring->tx_bi);
bi_size = sizeof(struct i40e_tx_buffer) * tx_ring->count;
tx_ring->tx_bi = kzalloc(bi_size, GFP_KERNEL);
if (!tx_ring->tx_bi)
goto err;
/* round up to nearest 4K */
tx_ring->size = tx_ring->count * sizeof(struct i40e_tx_desc);
/* add u32 for head writeback, align after this takes care of
* guaranteeing this is at least one cache line in size
*/
tx_ring->size += sizeof(u32);
tx_ring->size = ALIGN(tx_ring->size, 4096);
tx_ring->desc = dma_alloc_coherent(dev, tx_ring->size,
&tx_ring->dma, GFP_KERNEL);
if (!tx_ring->desc) {
dev_info(dev, "Unable to allocate memory for the Tx descriptor ring, size=%d\n",
tx_ring->size);
goto err;
}
tx_ring->next_to_use = 0;
tx_ring->next_to_clean = 0;
return 0;
err:
kfree(tx_ring->tx_bi);
tx_ring->tx_bi = NULL;
return -ENOMEM;
}
/**
* i40e_clean_rx_ring - Free Rx buffers
* @rx_ring: ring to be cleaned
**/
void i40e_clean_rx_ring(struct i40e_ring *rx_ring)
{
struct device *dev = rx_ring->dev;
struct i40e_rx_buffer *rx_bi;
unsigned long bi_size;
u16 i;
/* ring already cleared, nothing to do */
if (!rx_ring->rx_bi)
return;
if (ring_is_ps_enabled(rx_ring)) {
int bufsz = ALIGN(rx_ring->rx_hdr_len, 256) * rx_ring->count;
rx_bi = &rx_ring->rx_bi[0];
if (rx_bi->hdr_buf) {
dma_free_coherent(dev,
bufsz,
rx_bi->hdr_buf,
rx_bi->dma);
for (i = 0; i < rx_ring->count; i++) {
rx_bi = &rx_ring->rx_bi[i];
rx_bi->dma = 0;
rx_bi->hdr_buf = NULL;
}
}
}
/* Free all the Rx ring sk_buffs */
for (i = 0; i < rx_ring->count; i++) {
rx_bi = &rx_ring->rx_bi[i];
if (rx_bi->dma) {
dma_unmap_single(dev,
rx_bi->dma,
rx_ring->rx_buf_len,
DMA_FROM_DEVICE);
rx_bi->dma = 0;
}
if (rx_bi->skb) {
dev_kfree_skb(rx_bi->skb);
rx_bi->skb = NULL;
}
if (rx_bi->page) {
if (rx_bi->page_dma) {
dma_unmap_page(dev,
rx_bi->page_dma,
PAGE_SIZE,
DMA_FROM_DEVICE);
rx_bi->page_dma = 0;
}
__free_page(rx_bi->page);
rx_bi->page = NULL;
rx_bi->page_offset = 0;
}
}
bi_size = sizeof(struct i40e_rx_buffer) * rx_ring->count;
memset(rx_ring->rx_bi, 0, bi_size);
/* Zero out the descriptor ring */
memset(rx_ring->desc, 0, rx_ring->size);
rx_ring->next_to_clean = 0;
rx_ring->next_to_use = 0;
}
/**
* i40e_free_rx_resources - Free Rx resources
* @rx_ring: ring to clean the resources from
*
* Free all receive software resources
**/
void i40e_free_rx_resources(struct i40e_ring *rx_ring)
{
i40e_clean_rx_ring(rx_ring);
kfree(rx_ring->rx_bi);
rx_ring->rx_bi = NULL;
if (rx_ring->desc) {
dma_free_coherent(rx_ring->dev, rx_ring->size,
rx_ring->desc, rx_ring->dma);
rx_ring->desc = NULL;
}
}
/**
* i40e_alloc_rx_headers - allocate rx header buffers
* @rx_ring: ring to alloc buffers
*
* Allocate rx header buffers for the entire ring. As these are static,
* this is only called when setting up a new ring.
**/
void i40e_alloc_rx_headers(struct i40e_ring *rx_ring)
{
struct device *dev = rx_ring->dev;
struct i40e_rx_buffer *rx_bi;
dma_addr_t dma;
void *buffer;
int buf_size;
int i;
if (rx_ring->rx_bi[0].hdr_buf)
return;
/* Make sure the buffers don't cross cache line boundaries. */
buf_size = ALIGN(rx_ring->rx_hdr_len, 256);
buffer = dma_alloc_coherent(dev, buf_size * rx_ring->count,
&dma, GFP_KERNEL);
if (!buffer)
return;
for (i = 0; i < rx_ring->count; i++) {
rx_bi = &rx_ring->rx_bi[i];
rx_bi->dma = dma + (i * buf_size);
rx_bi->hdr_buf = buffer + (i * buf_size);
}
}
/**
* i40e_setup_rx_descriptors - Allocate Rx descriptors
* @rx_ring: Rx descriptor ring (for a specific queue) to setup
*
* Returns 0 on success, negative on failure
**/
int i40e_setup_rx_descriptors(struct i40e_ring *rx_ring)
{
struct device *dev = rx_ring->dev;
int bi_size;
/* warn if we are about to overwrite the pointer */
WARN_ON(rx_ring->rx_bi);
bi_size = sizeof(struct i40e_rx_buffer) * rx_ring->count;
rx_ring->rx_bi = kzalloc(bi_size, GFP_KERNEL);
if (!rx_ring->rx_bi)
goto err;
u64_stats_init(&rx_ring->syncp);
/* Round up to nearest 4K */
rx_ring->size = ring_is_16byte_desc_enabled(rx_ring)
? rx_ring->count * sizeof(union i40e_16byte_rx_desc)
: rx_ring->count * sizeof(union i40e_32byte_rx_desc);
rx_ring->size = ALIGN(rx_ring->size, 4096);
rx_ring->desc = dma_alloc_coherent(dev, rx_ring->size,
&rx_ring->dma, GFP_KERNEL);
if (!rx_ring->desc) {
dev_info(dev, "Unable to allocate memory for the Rx descriptor ring, size=%d\n",
rx_ring->size);
goto err;
}
rx_ring->next_to_clean = 0;
rx_ring->next_to_use = 0;
return 0;
err:
kfree(rx_ring->rx_bi);
rx_ring->rx_bi = NULL;
return -ENOMEM;
}
/**
* i40e_release_rx_desc - Store the new tail and head values
* @rx_ring: ring to bump
* @val: new head index
**/
static inline void i40e_release_rx_desc(struct i40e_ring *rx_ring, u32 val)
{
rx_ring->next_to_use = val;
/* Force memory writes to complete before letting h/w
* know there are new descriptors to fetch. (Only
* applicable for weak-ordered memory model archs,
* such as IA-64).
*/
wmb();
writel(val, rx_ring->tail);
}
/**
* i40e_alloc_rx_buffers_ps - Replace used receive buffers; packet split
* @rx_ring: ring to place buffers on
* @cleaned_count: number of buffers to replace
*
* Returns true if any errors on allocation
**/
bool i40e_alloc_rx_buffers_ps(struct i40e_ring *rx_ring, u16 cleaned_count)
{
u16 i = rx_ring->next_to_use;
union i40e_rx_desc *rx_desc;
struct i40e_rx_buffer *bi;
const int current_node = numa_node_id();
/* do nothing if no valid netdev defined */
if (!rx_ring->netdev || !cleaned_count)
return false;
while (cleaned_count--) {
rx_desc = I40E_RX_DESC(rx_ring, i);
bi = &rx_ring->rx_bi[i];
if (bi->skb) /* desc is in use */
goto no_buffers;
/* If we've been moved to a different NUMA node, release the
* page so we can get a new one on the current node.
*/
if (bi->page && page_to_nid(bi->page) != current_node) {
dma_unmap_page(rx_ring->dev,
bi->page_dma,
PAGE_SIZE,
DMA_FROM_DEVICE);
__free_page(bi->page);
bi->page = NULL;
bi->page_dma = 0;
rx_ring->rx_stats.realloc_count++;
} else if (bi->page) {
rx_ring->rx_stats.page_reuse_count++;
}
if (!bi->page) {
bi->page = alloc_page(GFP_ATOMIC);
if (!bi->page) {
rx_ring->rx_stats.alloc_page_failed++;
goto no_buffers;
}
bi->page_dma = dma_map_page(rx_ring->dev,
bi->page,
0,
PAGE_SIZE,
DMA_FROM_DEVICE);
if (dma_mapping_error(rx_ring->dev, bi->page_dma)) {
rx_ring->rx_stats.alloc_page_failed++;
__free_page(bi->page);
bi->page = NULL;
bi->page_dma = 0;
bi->page_offset = 0;
goto no_buffers;
}
bi->page_offset = 0;
}
/* Refresh the desc even if buffer_addrs didn't change
* because each write-back erases this info.
*/
rx_desc->read.pkt_addr =
cpu_to_le64(bi->page_dma + bi->page_offset);
rx_desc->read.hdr_addr = cpu_to_le64(bi->dma);
i++;
if (i == rx_ring->count)
i = 0;
}
if (rx_ring->next_to_use != i)
i40e_release_rx_desc(rx_ring, i);
return false;
no_buffers:
if (rx_ring->next_to_use != i)
i40e_release_rx_desc(rx_ring, i);
/* make sure to come back via polling to try again after
* allocation failure
*/
return true;
}
/**
* i40e_alloc_rx_buffers_1buf - Replace used receive buffers; single buffer
* @rx_ring: ring to place buffers on
* @cleaned_count: number of buffers to replace
*
* Returns true if any errors on allocation
**/
bool i40e_alloc_rx_buffers_1buf(struct i40e_ring *rx_ring, u16 cleaned_count)
{
u16 i = rx_ring->next_to_use;
union i40e_rx_desc *rx_desc;
struct i40e_rx_buffer *bi;
struct sk_buff *skb;
/* do nothing if no valid netdev defined */
if (!rx_ring->netdev || !cleaned_count)
return false;
while (cleaned_count--) {
rx_desc = I40E_RX_DESC(rx_ring, i);
bi = &rx_ring->rx_bi[i];
skb = bi->skb;
if (!skb) {
skb = __netdev_alloc_skb_ip_align(rx_ring->netdev,
rx_ring->rx_buf_len,
GFP_ATOMIC |
__GFP_NOWARN);
if (!skb) {
rx_ring->rx_stats.alloc_buff_failed++;
goto no_buffers;
}
/* initialize queue mapping */
skb_record_rx_queue(skb, rx_ring->queue_index);
bi->skb = skb;
}
if (!bi->dma) {
bi->dma = dma_map_single(rx_ring->dev,
skb->data,
rx_ring->rx_buf_len,
DMA_FROM_DEVICE);
if (dma_mapping_error(rx_ring->dev, bi->dma)) {
rx_ring->rx_stats.alloc_buff_failed++;
bi->dma = 0;
dev_kfree_skb(bi->skb);
bi->skb = NULL;
goto no_buffers;
}
}
rx_desc->read.pkt_addr = cpu_to_le64(bi->dma);
rx_desc->read.hdr_addr = 0;
i++;
if (i == rx_ring->count)
i = 0;
}
if (rx_ring->next_to_use != i)
i40e_release_rx_desc(rx_ring, i);
return false;
no_buffers:
if (rx_ring->next_to_use != i)
i40e_release_rx_desc(rx_ring, i);
/* make sure to come back via polling to try again after
* allocation failure
*/
return true;
}
/**
* i40e_receive_skb - Send a completed packet up the stack
* @rx_ring: rx ring in play
* @skb: packet to send up
* @vlan_tag: vlan tag for packet
**/
static void i40e_receive_skb(struct i40e_ring *rx_ring,
struct sk_buff *skb, u16 vlan_tag)
{
struct i40e_q_vector *q_vector = rx_ring->q_vector;
if (vlan_tag & VLAN_VID_MASK)
__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan_tag);
napi_gro_receive(&q_vector->napi, skb);
}
/**
* i40e_rx_checksum - Indicate in skb if hw indicated a good cksum
* @vsi: the VSI we care about
* @skb: skb currently being received and modified
* @rx_status: status value of last descriptor in packet
* @rx_error: error value of last descriptor in packet
* @rx_ptype: ptype value of last descriptor in packet
**/
static inline void i40e_rx_checksum(struct i40e_vsi *vsi,
struct sk_buff *skb,
u32 rx_status,
u32 rx_error,
u16 rx_ptype)
{
struct i40e_rx_ptype_decoded decoded = decode_rx_desc_ptype(rx_ptype);
bool ipv4, ipv6, ipv4_tunnel, ipv6_tunnel;
skb->ip_summed = CHECKSUM_NONE;
/* Rx csum enabled and ip headers found? */
if (!(vsi->netdev->features & NETIF_F_RXCSUM))
return;
/* did the hardware decode the packet and checksum? */
if (!(rx_status & BIT(I40E_RX_DESC_STATUS_L3L4P_SHIFT)))
return;
/* both known and outer_ip must be set for the below code to work */
if (!(decoded.known && decoded.outer_ip))
return;
ipv4 = (decoded.outer_ip == I40E_RX_PTYPE_OUTER_IP) &&
(decoded.outer_ip_ver == I40E_RX_PTYPE_OUTER_IPV4);
ipv6 = (decoded.outer_ip == I40E_RX_PTYPE_OUTER_IP) &&
(decoded.outer_ip_ver == I40E_RX_PTYPE_OUTER_IPV6);
if (ipv4 &&
(rx_error & (BIT(I40E_RX_DESC_ERROR_IPE_SHIFT) |
BIT(I40E_RX_DESC_ERROR_EIPE_SHIFT))))
goto checksum_fail;
/* likely incorrect csum if alternate IP extension headers found */
if (ipv6 &&
rx_status & BIT(I40E_RX_DESC_STATUS_IPV6EXADD_SHIFT))
/* don't increment checksum err here, non-fatal err */
return;
/* there was some L4 error, count error and punt packet to the stack */
if (rx_error & BIT(I40E_RX_DESC_ERROR_L4E_SHIFT))
goto checksum_fail;
/* handle packets that were not able to be checksummed due
* to arrival speed, in this case the stack can compute
* the csum.
*/
if (rx_error & BIT(I40E_RX_DESC_ERROR_PPRS_SHIFT))
return;
/* The hardware supported by this driver does not validate outer
* checksums for tunneled VXLAN or GENEVE frames. I don't agree
* with it but the specification states that you "MAY validate", it
* doesn't make it a hard requirement so if we have validated the
* inner checksum report CHECKSUM_UNNECESSARY.
*/
ipv4_tunnel = (rx_ptype >= I40E_RX_PTYPE_GRENAT4_MAC_PAY3) &&
(rx_ptype <= I40E_RX_PTYPE_GRENAT4_MACVLAN_IPV6_ICMP_PAY4);
ipv6_tunnel = (rx_ptype >= I40E_RX_PTYPE_GRENAT6_MAC_PAY3) &&
(rx_ptype <= I40E_RX_PTYPE_GRENAT6_MACVLAN_IPV6_ICMP_PAY4);
skb->ip_summed = CHECKSUM_UNNECESSARY;
skb->csum_level = ipv4_tunnel || ipv6_tunnel;
return;
checksum_fail:
vsi->back->hw_csum_rx_error++;
}
/**
* i40e_ptype_to_htype - get a hash type
* @ptype: the ptype value from the descriptor
*
* Returns a hash type to be used by skb_set_hash
**/
static inline enum pkt_hash_types i40e_ptype_to_htype(u8 ptype)
{
struct i40e_rx_ptype_decoded decoded = decode_rx_desc_ptype(ptype);
if (!decoded.known)
return PKT_HASH_TYPE_NONE;
if (decoded.outer_ip == I40E_RX_PTYPE_OUTER_IP &&
decoded.payload_layer == I40E_RX_PTYPE_PAYLOAD_LAYER_PAY4)
return PKT_HASH_TYPE_L4;
else if (decoded.outer_ip == I40E_RX_PTYPE_OUTER_IP &&
decoded.payload_layer == I40E_RX_PTYPE_PAYLOAD_LAYER_PAY3)
return PKT_HASH_TYPE_L3;
else
return PKT_HASH_TYPE_L2;
}
/**
* i40e_rx_hash - set the hash value in the skb
* @ring: descriptor ring
* @rx_desc: specific descriptor
**/
static inline void i40e_rx_hash(struct i40e_ring *ring,
union i40e_rx_desc *rx_desc,
struct sk_buff *skb,
u8 rx_ptype)
{
u32 hash;
const __le64 rss_mask =
cpu_to_le64((u64)I40E_RX_DESC_FLTSTAT_RSS_HASH <<
I40E_RX_DESC_STATUS_FLTSTAT_SHIFT);
if (ring->netdev->features & NETIF_F_RXHASH)
return;
if ((rx_desc->wb.qword1.status_error_len & rss_mask) == rss_mask) {
hash = le32_to_cpu(rx_desc->wb.qword0.hi_dword.rss);
skb_set_hash(skb, hash, i40e_ptype_to_htype(rx_ptype));
}
}
/**
* i40e_clean_rx_irq_ps - Reclaim resources after receive; packet split
* @rx_ring: rx ring to clean
* @budget: how many cleans we're allowed
*
* Returns true if there's any budget left (e.g. the clean is finished)
**/
static int i40e_clean_rx_irq_ps(struct i40e_ring *rx_ring, const int budget)
{
unsigned int total_rx_bytes = 0, total_rx_packets = 0;
u16 rx_packet_len, rx_header_len, rx_sph, rx_hbo;
u16 cleaned_count = I40E_DESC_UNUSED(rx_ring);
struct i40e_vsi *vsi = rx_ring->vsi;
u16 i = rx_ring->next_to_clean;
union i40e_rx_desc *rx_desc;
u32 rx_error, rx_status;
bool failure = false;
u8 rx_ptype;
u64 qword;
u32 copysize;
if (budget <= 0)
return 0;
do {
struct i40e_rx_buffer *rx_bi;
struct sk_buff *skb;
u16 vlan_tag;
/* return some buffers to hardware, one at a time is too slow */
if (cleaned_count >= I40E_RX_BUFFER_WRITE) {
failure = failure ||
i40e_alloc_rx_buffers_ps(rx_ring,
cleaned_count);
cleaned_count = 0;
}
i = rx_ring->next_to_clean;
rx_desc = I40E_RX_DESC(rx_ring, i);
qword = le64_to_cpu(rx_desc->wb.qword1.status_error_len);
rx_status = (qword & I40E_RXD_QW1_STATUS_MASK) >>
I40E_RXD_QW1_STATUS_SHIFT;
if (!(rx_status & BIT(I40E_RX_DESC_STATUS_DD_SHIFT)))
break;
/* This memory barrier is needed to keep us from reading
* any other fields out of the rx_desc until we know the
* DD bit is set.
*/
dma_rmb();
/* sync header buffer for reading */
dma_sync_single_range_for_cpu(rx_ring->dev,
rx_ring->rx_bi[0].dma,
i * rx_ring->rx_hdr_len,
rx_ring->rx_hdr_len,
DMA_FROM_DEVICE);
if (i40e_rx_is_programming_status(qword)) {
i40e_clean_programming_status(rx_ring, rx_desc);
I40E_RX_INCREMENT(rx_ring, i);
continue;
}
rx_bi = &rx_ring->rx_bi[i];
skb = rx_bi->skb;
if (likely(!skb)) {
skb = __netdev_alloc_skb_ip_align(rx_ring->netdev,
rx_ring->rx_hdr_len,
GFP_ATOMIC |
__GFP_NOWARN);
if (!skb) {
rx_ring->rx_stats.alloc_buff_failed++;
failure = true;
break;
}
/* initialize queue mapping */
skb_record_rx_queue(skb, rx_ring->queue_index);
/* we are reusing so sync this buffer for CPU use */
dma_sync_single_range_for_cpu(rx_ring->dev,
rx_ring->rx_bi[0].dma,
i * rx_ring->rx_hdr_len,
rx_ring->rx_hdr_len,
DMA_FROM_DEVICE);
}
rx_packet_len = (qword & I40E_RXD_QW1_LENGTH_PBUF_MASK) >>
I40E_RXD_QW1_LENGTH_PBUF_SHIFT;
rx_header_len = (qword & I40E_RXD_QW1_LENGTH_HBUF_MASK) >>
I40E_RXD_QW1_LENGTH_HBUF_SHIFT;
rx_sph = (qword & I40E_RXD_QW1_LENGTH_SPH_MASK) >>
I40E_RXD_QW1_LENGTH_SPH_SHIFT;
rx_error = (qword & I40E_RXD_QW1_ERROR_MASK) >>
I40E_RXD_QW1_ERROR_SHIFT;
rx_hbo = rx_error & BIT(I40E_RX_DESC_ERROR_HBO_SHIFT);
rx_error &= ~BIT(I40E_RX_DESC_ERROR_HBO_SHIFT);
rx_ptype = (qword & I40E_RXD_QW1_PTYPE_MASK) >>
I40E_RXD_QW1_PTYPE_SHIFT;
/* sync half-page for reading */
dma_sync_single_range_for_cpu(rx_ring->dev,
rx_bi->page_dma,
rx_bi->page_offset,
PAGE_SIZE / 2,
DMA_FROM_DEVICE);
prefetch(page_address(rx_bi->page) + rx_bi->page_offset);
rx_bi->skb = NULL;
cleaned_count++;
copysize = 0;
if (rx_hbo || rx_sph) {
int len;
if (rx_hbo)
len = I40E_RX_HDR_SIZE;
else
len = rx_header_len;
memcpy(__skb_put(skb, len), rx_bi->hdr_buf, len);
} else if (skb->len == 0) {
int len;
unsigned char *va = page_address(rx_bi->page) +
rx_bi->page_offset;
len = min(rx_packet_len, rx_ring->rx_hdr_len);
memcpy(__skb_put(skb, len), va, len);
copysize = len;
rx_packet_len -= len;
}
/* Get the rest of the data if this was a header split */
if (rx_packet_len) {
skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags,
rx_bi->page,
rx_bi->page_offset + copysize,
rx_packet_len, I40E_RXBUFFER_2048);
/* If the page count is more than 2, then both halves
* of the page are used and we need to free it. Do it
* here instead of in the alloc code. Otherwise one
* of the half-pages might be released between now and
* then, and we wouldn't know which one to use.
* Don't call get_page and free_page since those are
* both expensive atomic operations that just change
* the refcount in opposite directions. Just give the
* page to the stack; he can have our refcount.
*/
if (page_count(rx_bi->page) > 2) {
dma_unmap_page(rx_ring->dev,
rx_bi->page_dma,
PAGE_SIZE,
DMA_FROM_DEVICE);
rx_bi->page = NULL;
rx_bi->page_dma = 0;
rx_ring->rx_stats.realloc_count++;
} else {
get_page(rx_bi->page);
/* switch to the other half-page here; the
* allocation code programs the right addr
* into HW. If we haven't used this half-page,
* the address won't be changed, and HW can
* just use it next time through.
*/
rx_bi->page_offset ^= PAGE_SIZE / 2;
}
}
I40E_RX_INCREMENT(rx_ring, i);
if (unlikely(
!(rx_status & BIT(I40E_RX_DESC_STATUS_EOF_SHIFT)))) {
struct i40e_rx_buffer *next_buffer;
next_buffer = &rx_ring->rx_bi[i];
next_buffer->skb = skb;
rx_ring->rx_stats.non_eop_descs++;
continue;
}
/* ERR_MASK will only have valid bits if EOP set */
if (unlikely(rx_error & BIT(I40E_RX_DESC_ERROR_RXE_SHIFT))) {
dev_kfree_skb_any(skb);
continue;
}
i40e_rx_hash(rx_ring, rx_desc, skb, rx_ptype);
if (unlikely(rx_status & I40E_RXD_QW1_STATUS_TSYNVALID_MASK)) {
i40e_ptp_rx_hwtstamp(vsi->back, skb, (rx_status &
I40E_RXD_QW1_STATUS_TSYNINDX_MASK) >>
I40E_RXD_QW1_STATUS_TSYNINDX_SHIFT);
rx_ring->last_rx_timestamp = jiffies;
}
/* probably a little skewed due to removing CRC */
total_rx_bytes += skb->len;
total_rx_packets++;
skb->protocol = eth_type_trans(skb, rx_ring->netdev);
i40e_rx_checksum(vsi, skb, rx_status, rx_error, rx_ptype);
vlan_tag = rx_status & BIT(I40E_RX_DESC_STATUS_L2TAG1P_SHIFT)
? le16_to_cpu(rx_desc->wb.qword0.lo_dword.l2tag1)
: 0;
#ifdef I40E_FCOE
if (!i40e_fcoe_handle_offload(rx_ring, rx_desc, skb)) {
dev_kfree_skb_any(skb);
continue;
}
#endif
i40e_receive_skb(rx_ring, skb, vlan_tag);
rx_desc->wb.qword1.status_error_len = 0;
} while (likely(total_rx_packets < budget));
u64_stats_update_begin(&rx_ring->syncp);
rx_ring->stats.packets += total_rx_packets;
rx_ring->stats.bytes += total_rx_bytes;
u64_stats_update_end(&rx_ring->syncp);
rx_ring->q_vector->rx.total_packets += total_rx_packets;
rx_ring->q_vector->rx.total_bytes += total_rx_bytes;
return failure ? budget : total_rx_packets;
}
/**
* i40e_clean_rx_irq_1buf - Reclaim resources after receive; single buffer
* @rx_ring: rx ring to clean
* @budget: how many cleans we're allowed
*
* Returns number of packets cleaned
**/
static int i40e_clean_rx_irq_1buf(struct i40e_ring *rx_ring, int budget)
{
unsigned int total_rx_bytes = 0, total_rx_packets = 0;
u16 cleaned_count = I40E_DESC_UNUSED(rx_ring);
struct i40e_vsi *vsi = rx_ring->vsi;
union i40e_rx_desc *rx_desc;
u32 rx_error, rx_status;
u16 rx_packet_len;
bool failure = false;
u8 rx_ptype;
u64 qword;
u16 i;
do {
struct i40e_rx_buffer *rx_bi;
struct sk_buff *skb;
u16 vlan_tag;
/* return some buffers to hardware, one at a time is too slow */
if (cleaned_count >= I40E_RX_BUFFER_WRITE) {
failure = failure ||
i40e_alloc_rx_buffers_1buf(rx_ring,
cleaned_count);
cleaned_count = 0;
}
i = rx_ring->next_to_clean;
rx_desc = I40E_RX_DESC(rx_ring, i);
qword = le64_to_cpu(rx_desc->wb.qword1.status_error_len);
rx_status = (qword & I40E_RXD_QW1_STATUS_MASK) >>
I40E_RXD_QW1_STATUS_SHIFT;
if (!(rx_status & BIT(I40E_RX_DESC_STATUS_DD_SHIFT)))
break;
/* This memory barrier is needed to keep us from reading
* any other fields out of the rx_desc until we know the
* DD bit is set.
*/
dma_rmb();
if (i40e_rx_is_programming_status(qword)) {
i40e_clean_programming_status(rx_ring, rx_desc);
I40E_RX_INCREMENT(rx_ring, i);
continue;
}
rx_bi = &rx_ring->rx_bi[i];
skb = rx_bi->skb;
prefetch(skb->data);
rx_packet_len = (qword & I40E_RXD_QW1_LENGTH_PBUF_MASK) >>
I40E_RXD_QW1_LENGTH_PBUF_SHIFT;
rx_error = (qword & I40E_RXD_QW1_ERROR_MASK) >>
I40E_RXD_QW1_ERROR_SHIFT;
rx_error &= ~BIT(I40E_RX_DESC_ERROR_HBO_SHIFT);
rx_ptype = (qword & I40E_RXD_QW1_PTYPE_MASK) >>
I40E_RXD_QW1_PTYPE_SHIFT;
rx_bi->skb = NULL;
cleaned_count++;
/* Get the header and possibly the whole packet
* If this is an skb from previous receive dma will be 0
*/
skb_put(skb, rx_packet_len);
dma_unmap_single(rx_ring->dev, rx_bi->dma, rx_ring->rx_buf_len,
DMA_FROM_DEVICE);
rx_bi->dma = 0;
I40E_RX_INCREMENT(rx_ring, i);
if (unlikely(
!(rx_status & BIT(I40E_RX_DESC_STATUS_EOF_SHIFT)))) {
rx_ring->rx_stats.non_eop_descs++;
continue;
}
/* ERR_MASK will only have valid bits if EOP set */
if (unlikely(rx_error & BIT(I40E_RX_DESC_ERROR_RXE_SHIFT))) {
dev_kfree_skb_any(skb);
continue;
}
i40e_rx_hash(rx_ring, rx_desc, skb, rx_ptype);
if (unlikely(rx_status & I40E_RXD_QW1_STATUS_TSYNVALID_MASK)) {
i40e_ptp_rx_hwtstamp(vsi->back, skb, (rx_status &
I40E_RXD_QW1_STATUS_TSYNINDX_MASK) >>
I40E_RXD_QW1_STATUS_TSYNINDX_SHIFT);
rx_ring->last_rx_timestamp = jiffies;
}
/* probably a little skewed due to removing CRC */
total_rx_bytes += skb->len;
total_rx_packets++;
skb->protocol = eth_type_trans(skb, rx_ring->netdev);
i40e_rx_checksum(vsi, skb, rx_status, rx_error, rx_ptype);
vlan_tag = rx_status & BIT(I40E_RX_DESC_STATUS_L2TAG1P_SHIFT)
? le16_to_cpu(rx_desc->wb.qword0.lo_dword.l2tag1)
: 0;
#ifdef I40E_FCOE
if (!i40e_fcoe_handle_offload(rx_ring, rx_desc, skb)) {
dev_kfree_skb_any(skb);
continue;
}
#endif
i40e_receive_skb(rx_ring, skb, vlan_tag);
rx_desc->wb.qword1.status_error_len = 0;
} while (likely(total_rx_packets < budget));
u64_stats_update_begin(&rx_ring->syncp);
rx_ring->stats.packets += total_rx_packets;
rx_ring->stats.bytes += total_rx_bytes;
u64_stats_update_end(&rx_ring->syncp);
rx_ring->q_vector->rx.total_packets += total_rx_packets;
rx_ring->q_vector->rx.total_bytes += total_rx_bytes;
return failure ? budget : total_rx_packets;
}
static u32 i40e_buildreg_itr(const int type, const u16 itr)
{
u32 val;
val = I40E_PFINT_DYN_CTLN_INTENA_MASK |
/* Don't clear PBA because that can cause lost interrupts that
* came in while we were cleaning/polling
*/
(type << I40E_PFINT_DYN_CTLN_ITR_INDX_SHIFT) |
(itr << I40E_PFINT_DYN_CTLN_INTERVAL_SHIFT);
return val;
}
/* a small macro to shorten up some long lines */
#define INTREG I40E_PFINT_DYN_CTLN
/**
* i40e_update_enable_itr - Update itr and re-enable MSIX interrupt
* @vsi: the VSI we care about
* @q_vector: q_vector for which itr is being updated and interrupt enabled
*
**/
static inline void i40e_update_enable_itr(struct i40e_vsi *vsi,
struct i40e_q_vector *q_vector)
{
struct i40e_hw *hw = &vsi->back->hw;
bool rx = false, tx = false;
u32 rxval, txval;
int vector;
int idx = q_vector->v_idx;
vector = (q_vector->v_idx + vsi->base_vector);
/* avoid dynamic calculation if in countdown mode OR if
* all dynamic is disabled
*/
rxval = txval = i40e_buildreg_itr(I40E_ITR_NONE, 0);
if (q_vector->itr_countdown > 0 ||
(!ITR_IS_DYNAMIC(vsi->rx_rings[idx]->rx_itr_setting) &&
!ITR_IS_DYNAMIC(vsi->tx_rings[idx]->tx_itr_setting))) {
goto enable_int;
}
if (ITR_IS_DYNAMIC(vsi->rx_rings[idx]->rx_itr_setting)) {
rx = i40e_set_new_dynamic_itr(&q_vector->rx);
rxval = i40e_buildreg_itr(I40E_RX_ITR, q_vector->rx.itr);
}
if (ITR_IS_DYNAMIC(vsi->tx_rings[idx]->tx_itr_setting)) {
tx = i40e_set_new_dynamic_itr(&q_vector->tx);
txval = i40e_buildreg_itr(I40E_TX_ITR, q_vector->tx.itr);
}
if (rx || tx) {
/* get the higher of the two ITR adjustments and
* use the same value for both ITR registers
* when in adaptive mode (Rx and/or Tx)
*/
u16 itr = max(q_vector->tx.itr, q_vector->rx.itr);
q_vector->tx.itr = q_vector->rx.itr = itr;
txval = i40e_buildreg_itr(I40E_TX_ITR, itr);
tx = true;
rxval = i40e_buildreg_itr(I40E_RX_ITR, itr);
rx = true;
}
/* only need to enable the interrupt once, but need
* to possibly update both ITR values
*/
if (rx) {
/* set the INTENA_MSK_MASK so that this first write
* won't actually enable the interrupt, instead just
* updating the ITR (it's bit 31 PF and VF)
*/
rxval |= BIT(31);
/* don't check _DOWN because interrupt isn't being enabled */
wr32(hw, INTREG(vector - 1), rxval);
}
enable_int:
if (!test_bit(__I40E_DOWN, &vsi->state))
wr32(hw, INTREG(vector - 1), txval);
if (q_vector->itr_countdown)
q_vector->itr_countdown--;
else
q_vector->itr_countdown = ITR_COUNTDOWN_START;
}
/**
* i40e_napi_poll - NAPI polling Rx/Tx cleanup routine
* @napi: napi struct with our devices info in it
* @budget: amount of work driver is allowed to do this pass, in packets
*
* This function will clean all queues associated with a q_vector.
*
* Returns the amount of work done
**/
int i40e_napi_poll(struct napi_struct *napi, int budget)
{
struct i40e_q_vector *q_vector =
container_of(napi, struct i40e_q_vector, napi);
struct i40e_vsi *vsi = q_vector->vsi;
struct i40e_ring *ring;
bool clean_complete = true;
bool arm_wb = false;
int budget_per_ring;
drivers/net/intel: use napi_complete_done() As per Eric Dumazet's previous patches: (see commit (24d2e4a50737) - tg3: use napi_complete_done()) Quoting verbatim: Using napi_complete_done() instead of napi_complete() allows us to use /sys/class/net/ethX/gro_flush_timeout GRO layer can aggregate more packets if the flush is delayed a bit, without having to set too big coalescing parameters that impact latencies. </end quote> Tested configuration: low latency via ethtool -C ethx adaptive-rx off rx-usecs 10 adaptive-tx off tx-usecs 15 workload: streaming rx using netperf TCP_MAERTS igb: MIGRATED TCP MAERTS TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.0.0.1 () port 0 AF_INET : demo ... Interim result: 941.48 10^6bits/s over 1.000 seconds ending at 1440193171.589 Alignment Offset Bytes Bytes Recvs Bytes Sends Local Remote Local Remote Xfered Per Per Recv Send Recv Send Recv (avg) Send (avg) 8 8 0 0 1176930056 1475.36 797726 16384.00 71905 MIGRATED TCP MAERTS TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.0.0.1 () port 0 AF_INET : demo ... Interim result: 941.49 10^6bits/s over 0.997 seconds ending at 1440193142.763 Alignment Offset Bytes Bytes Recvs Bytes Sends Local Remote Local Remote Xfered Per Per Recv Send Recv Send Recv (avg) Send (avg) 8 8 0 0 1175182320 50476.00 23282 16384.00 71816 i40e: Hard to test because the traffic is incoming so fast (24Gb/s) that GRO always receives 87kB, even at the highest interrupt rate. Other drivers were only compile tested. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-24 17:35:47 -06:00
int work_done = 0;
if (test_bit(__I40E_DOWN, &vsi->state)) {
napi_complete(napi);
return 0;
}
/* Clear hung_detected bit */
clear_bit(I40E_Q_VECTOR_HUNG_DETECT, &q_vector->hung_detected);
/* Since the actual Tx work is minimal, we can give the Tx a larger
* budget and be more aggressive about cleaning up the Tx descriptors.
*/
i40e_for_each_ring(ring, q_vector->tx) {
clean_complete = clean_complete &&
i40e_clean_tx_irq(ring, vsi->work_limit);
arm_wb = arm_wb || ring->arm_wb;
ring->arm_wb = false;
}
/* Handle case where we are called by netpoll with a budget of 0 */
if (budget <= 0)
goto tx_only;
/* We attempt to distribute budget to each Rx queue fairly, but don't
* allow the budget to go below 1 because that would exit polling early.
*/
budget_per_ring = max(budget/q_vector->num_ringpairs, 1);
i40e_for_each_ring(ring, q_vector->rx) {
drivers/net/intel: use napi_complete_done() As per Eric Dumazet's previous patches: (see commit (24d2e4a50737) - tg3: use napi_complete_done()) Quoting verbatim: Using napi_complete_done() instead of napi_complete() allows us to use /sys/class/net/ethX/gro_flush_timeout GRO layer can aggregate more packets if the flush is delayed a bit, without having to set too big coalescing parameters that impact latencies. </end quote> Tested configuration: low latency via ethtool -C ethx adaptive-rx off rx-usecs 10 adaptive-tx off tx-usecs 15 workload: streaming rx using netperf TCP_MAERTS igb: MIGRATED TCP MAERTS TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.0.0.1 () port 0 AF_INET : demo ... Interim result: 941.48 10^6bits/s over 1.000 seconds ending at 1440193171.589 Alignment Offset Bytes Bytes Recvs Bytes Sends Local Remote Local Remote Xfered Per Per Recv Send Recv Send Recv (avg) Send (avg) 8 8 0 0 1176930056 1475.36 797726 16384.00 71905 MIGRATED TCP MAERTS TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.0.0.1 () port 0 AF_INET : demo ... Interim result: 941.49 10^6bits/s over 0.997 seconds ending at 1440193142.763 Alignment Offset Bytes Bytes Recvs Bytes Sends Local Remote Local Remote Xfered Per Per Recv Send Recv Send Recv (avg) Send (avg) 8 8 0 0 1175182320 50476.00 23282 16384.00 71816 i40e: Hard to test because the traffic is incoming so fast (24Gb/s) that GRO always receives 87kB, even at the highest interrupt rate. Other drivers were only compile tested. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-24 17:35:47 -06:00
int cleaned;
if (ring_is_ps_enabled(ring))
cleaned = i40e_clean_rx_irq_ps(ring, budget_per_ring);
else
cleaned = i40e_clean_rx_irq_1buf(ring, budget_per_ring);
drivers/net/intel: use napi_complete_done() As per Eric Dumazet's previous patches: (see commit (24d2e4a50737) - tg3: use napi_complete_done()) Quoting verbatim: Using napi_complete_done() instead of napi_complete() allows us to use /sys/class/net/ethX/gro_flush_timeout GRO layer can aggregate more packets if the flush is delayed a bit, without having to set too big coalescing parameters that impact latencies. </end quote> Tested configuration: low latency via ethtool -C ethx adaptive-rx off rx-usecs 10 adaptive-tx off tx-usecs 15 workload: streaming rx using netperf TCP_MAERTS igb: MIGRATED TCP MAERTS TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.0.0.1 () port 0 AF_INET : demo ... Interim result: 941.48 10^6bits/s over 1.000 seconds ending at 1440193171.589 Alignment Offset Bytes Bytes Recvs Bytes Sends Local Remote Local Remote Xfered Per Per Recv Send Recv Send Recv (avg) Send (avg) 8 8 0 0 1176930056 1475.36 797726 16384.00 71905 MIGRATED TCP MAERTS TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.0.0.1 () port 0 AF_INET : demo ... Interim result: 941.49 10^6bits/s over 0.997 seconds ending at 1440193142.763 Alignment Offset Bytes Bytes Recvs Bytes Sends Local Remote Local Remote Xfered Per Per Recv Send Recv Send Recv (avg) Send (avg) 8 8 0 0 1175182320 50476.00 23282 16384.00 71816 i40e: Hard to test because the traffic is incoming so fast (24Gb/s) that GRO always receives 87kB, even at the highest interrupt rate. Other drivers were only compile tested. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-24 17:35:47 -06:00
work_done += cleaned;
/* if we didn't clean as many as budgeted, we must be done */
clean_complete = clean_complete && (budget_per_ring > cleaned);
}
/* If work not completed, return budget and polling will return */
if (!clean_complete) {
tx_only:
if (arm_wb) {
q_vector->tx.ring[0].tx_stats.tx_force_wb++;
i40e_enable_wb_on_itr(vsi, q_vector);
}
return budget;
}
if (vsi->back->flags & I40E_TXR_FLAGS_WB_ON_ITR)
q_vector->arm_wb_state = false;
/* Work is done so exit the polling mode and re-enable the interrupt */
drivers/net/intel: use napi_complete_done() As per Eric Dumazet's previous patches: (see commit (24d2e4a50737) - tg3: use napi_complete_done()) Quoting verbatim: Using napi_complete_done() instead of napi_complete() allows us to use /sys/class/net/ethX/gro_flush_timeout GRO layer can aggregate more packets if the flush is delayed a bit, without having to set too big coalescing parameters that impact latencies. </end quote> Tested configuration: low latency via ethtool -C ethx adaptive-rx off rx-usecs 10 adaptive-tx off tx-usecs 15 workload: streaming rx using netperf TCP_MAERTS igb: MIGRATED TCP MAERTS TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.0.0.1 () port 0 AF_INET : demo ... Interim result: 941.48 10^6bits/s over 1.000 seconds ending at 1440193171.589 Alignment Offset Bytes Bytes Recvs Bytes Sends Local Remote Local Remote Xfered Per Per Recv Send Recv Send Recv (avg) Send (avg) 8 8 0 0 1176930056 1475.36 797726 16384.00 71905 MIGRATED TCP MAERTS TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.0.0.1 () port 0 AF_INET : demo ... Interim result: 941.49 10^6bits/s over 0.997 seconds ending at 1440193142.763 Alignment Offset Bytes Bytes Recvs Bytes Sends Local Remote Local Remote Xfered Per Per Recv Send Recv Send Recv (avg) Send (avg) 8 8 0 0 1175182320 50476.00 23282 16384.00 71816 i40e: Hard to test because the traffic is incoming so fast (24Gb/s) that GRO always receives 87kB, even at the highest interrupt rate. Other drivers were only compile tested. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-24 17:35:47 -06:00
napi_complete_done(napi, work_done);
if (vsi->back->flags & I40E_FLAG_MSIX_ENABLED) {
i40e_update_enable_itr(vsi, q_vector);
} else { /* Legacy mode */
i40e_irq_dynamic_enable_icr0(vsi->back, false);
}
return 0;
}
/**
* i40e_atr - Add a Flow Director ATR filter
* @tx_ring: ring to add programming descriptor to
* @skb: send buffer
* @tx_flags: send tx flags
**/
static void i40e_atr(struct i40e_ring *tx_ring, struct sk_buff *skb,
u32 tx_flags)
{
struct i40e_filter_program_desc *fdir_desc;
struct i40e_pf *pf = tx_ring->vsi->back;
union {
unsigned char *network;
struct iphdr *ipv4;
struct ipv6hdr *ipv6;
} hdr;
struct tcphdr *th;
unsigned int hlen;
u32 flex_ptype, dtype_cmd;
int l4_proto;
u16 i;
/* make sure ATR is enabled */
if (!(pf->flags & I40E_FLAG_FD_ATR_ENABLED))
return;
if ((pf->auto_disable_flags & I40E_FLAG_FD_ATR_ENABLED))
return;
/* if sampling is disabled do nothing */
if (!tx_ring->atr_sample_rate)
return;
/* Currently only IPv4/IPv6 with TCP is supported */
if (!(tx_flags & (I40E_TX_FLAGS_IPV4 | I40E_TX_FLAGS_IPV6)))
return;
/* snag network header to get L4 type and address */
hdr.network = (tx_flags & I40E_TX_FLAGS_UDP_TUNNEL) ?
skb_inner_network_header(skb) : skb_network_header(skb);
/* Note: tx_flags gets modified to reflect inner protocols in
* tx_enable_csum function if encap is enabled.
*/
if (tx_flags & I40E_TX_FLAGS_IPV4) {
/* access ihl as u8 to avoid unaligned access on ia64 */
hlen = (hdr.network[0] & 0x0F) << 2;
l4_proto = hdr.ipv4->protocol;
} else {
hlen = hdr.network - skb->data;
l4_proto = ipv6_find_hdr(skb, &hlen, IPPROTO_TCP, NULL, NULL);
hlen -= hdr.network - skb->data;
}
if (l4_proto != IPPROTO_TCP)
return;
th = (struct tcphdr *)(hdr.network + hlen);
/* Due to lack of space, no more new filters can be programmed */
if (th->syn && (pf->auto_disable_flags & I40E_FLAG_FD_ATR_ENABLED))
return;
if ((pf->flags & I40E_FLAG_HW_ATR_EVICT_CAPABLE) &&
(!(pf->auto_disable_flags & I40E_FLAG_HW_ATR_EVICT_CAPABLE))) {
/* HW ATR eviction will take care of removing filters on FIN
* and RST packets.
*/
if (th->fin || th->rst)
return;
}
tx_ring->atr_count++;
/* sample on all syn/fin/rst packets or once every atr sample rate */
if (!th->fin &&
!th->syn &&
!th->rst &&
(tx_ring->atr_count < tx_ring->atr_sample_rate))
return;
tx_ring->atr_count = 0;
/* grab the next descriptor */
i = tx_ring->next_to_use;
fdir_desc = I40E_TX_FDIRDESC(tx_ring, i);
i++;
tx_ring->next_to_use = (i < tx_ring->count) ? i : 0;
flex_ptype = (tx_ring->queue_index << I40E_TXD_FLTR_QW0_QINDEX_SHIFT) &
I40E_TXD_FLTR_QW0_QINDEX_MASK;
flex_ptype |= (tx_flags & I40E_TX_FLAGS_IPV4) ?
(I40E_FILTER_PCTYPE_NONF_IPV4_TCP <<
I40E_TXD_FLTR_QW0_PCTYPE_SHIFT) :
(I40E_FILTER_PCTYPE_NONF_IPV6_TCP <<
I40E_TXD_FLTR_QW0_PCTYPE_SHIFT);
flex_ptype |= tx_ring->vsi->id << I40E_TXD_FLTR_QW0_DEST_VSI_SHIFT;
dtype_cmd = I40E_TX_DESC_DTYPE_FILTER_PROG;
dtype_cmd |= (th->fin || th->rst) ?
(I40E_FILTER_PROGRAM_DESC_PCMD_REMOVE <<
I40E_TXD_FLTR_QW1_PCMD_SHIFT) :
(I40E_FILTER_PROGRAM_DESC_PCMD_ADD_UPDATE <<
I40E_TXD_FLTR_QW1_PCMD_SHIFT);
dtype_cmd |= I40E_FILTER_PROGRAM_DESC_DEST_DIRECT_PACKET_QINDEX <<
I40E_TXD_FLTR_QW1_DEST_SHIFT;
dtype_cmd |= I40E_FILTER_PROGRAM_DESC_FD_STATUS_FD_ID <<
I40E_TXD_FLTR_QW1_FD_STATUS_SHIFT;
dtype_cmd |= I40E_TXD_FLTR_QW1_CNT_ENA_MASK;
if (!(tx_flags & I40E_TX_FLAGS_UDP_TUNNEL))
dtype_cmd |=
((u32)I40E_FD_ATR_STAT_IDX(pf->hw.pf_id) <<
I40E_TXD_FLTR_QW1_CNTINDEX_SHIFT) &
I40E_TXD_FLTR_QW1_CNTINDEX_MASK;
else
dtype_cmd |=
((u32)I40E_FD_ATR_TUNNEL_STAT_IDX(pf->hw.pf_id) <<
I40E_TXD_FLTR_QW1_CNTINDEX_SHIFT) &
I40E_TXD_FLTR_QW1_CNTINDEX_MASK;
if ((pf->flags & I40E_FLAG_HW_ATR_EVICT_CAPABLE) &&
(!(pf->auto_disable_flags & I40E_FLAG_HW_ATR_EVICT_CAPABLE)))
dtype_cmd |= I40E_TXD_FLTR_QW1_ATR_MASK;
fdir_desc->qindex_flex_ptype_vsi = cpu_to_le32(flex_ptype);
fdir_desc->rsvd = cpu_to_le32(0);
fdir_desc->dtype_cmd_cntindex = cpu_to_le32(dtype_cmd);
fdir_desc->fd_id = cpu_to_le32(0);
}
/**
* i40e_tx_prepare_vlan_flags - prepare generic TX VLAN tagging flags for HW
* @skb: send buffer
* @tx_ring: ring to send buffer on
* @flags: the tx flags to be set
*
* Checks the skb and set up correspondingly several generic transmit flags
* related to VLAN tagging for the HW, such as VLAN, DCB, etc.
*
* Returns error code indicate the frame should be dropped upon error and the
* otherwise returns 0 to indicate the flags has been set properly.
**/
#ifdef I40E_FCOE
inline int i40e_tx_prepare_vlan_flags(struct sk_buff *skb,
struct i40e_ring *tx_ring,
u32 *flags)
#else
static inline int i40e_tx_prepare_vlan_flags(struct sk_buff *skb,
struct i40e_ring *tx_ring,
u32 *flags)
#endif
{
__be16 protocol = skb->protocol;
u32 tx_flags = 0;
if (protocol == htons(ETH_P_8021Q) &&
!(tx_ring->netdev->features & NETIF_F_HW_VLAN_CTAG_TX)) {
/* When HW VLAN acceleration is turned off by the user the
* stack sets the protocol to 8021q so that the driver
* can take any steps required to support the SW only
* VLAN handling. In our case the driver doesn't need
* to take any further steps so just set the protocol
* to the encapsulated ethertype.
*/
skb->protocol = vlan_get_protocol(skb);
goto out;
}
/* if we have a HW VLAN tag being added, default to the HW one */
if (skb_vlan_tag_present(skb)) {
tx_flags |= skb_vlan_tag_get(skb) << I40E_TX_FLAGS_VLAN_SHIFT;
tx_flags |= I40E_TX_FLAGS_HW_VLAN;
/* else if it is a SW VLAN, check the next protocol and store the tag */
} else if (protocol == htons(ETH_P_8021Q)) {
struct vlan_hdr *vhdr, _vhdr;
vhdr = skb_header_pointer(skb, ETH_HLEN, sizeof(_vhdr), &_vhdr);
if (!vhdr)
return -EINVAL;
protocol = vhdr->h_vlan_encapsulated_proto;
tx_flags |= ntohs(vhdr->h_vlan_TCI) << I40E_TX_FLAGS_VLAN_SHIFT;
tx_flags |= I40E_TX_FLAGS_SW_VLAN;
}
if (!(tx_ring->vsi->back->flags & I40E_FLAG_DCB_ENABLED))
goto out;
/* Insert 802.1p priority into VLAN header */
if ((tx_flags & (I40E_TX_FLAGS_HW_VLAN | I40E_TX_FLAGS_SW_VLAN)) ||
(skb->priority != TC_PRIO_CONTROL)) {
tx_flags &= ~I40E_TX_FLAGS_VLAN_PRIO_MASK;
tx_flags |= (skb->priority & 0x7) <<
I40E_TX_FLAGS_VLAN_PRIO_SHIFT;
if (tx_flags & I40E_TX_FLAGS_SW_VLAN) {
struct vlan_ethhdr *vhdr;
int rc;
rc = skb_cow_head(skb, 0);
if (rc < 0)
return rc;
vhdr = (struct vlan_ethhdr *)skb->data;
vhdr->h_vlan_TCI = htons(tx_flags >>
I40E_TX_FLAGS_VLAN_SHIFT);
} else {
tx_flags |= I40E_TX_FLAGS_HW_VLAN;
}
}
out:
*flags = tx_flags;
return 0;
}
/**
* i40e_tso - set up the tso context descriptor
* @tx_ring: ptr to the ring to send
* @skb: ptr to the skb we're sending
* @hdr_len: ptr to the size of the packet header
* @cd_type_cmd_tso_mss: Quad Word 1
*
* Returns 0 if no TSO can happen, 1 if tso is going, or error
**/
static int i40e_tso(struct i40e_ring *tx_ring, struct sk_buff *skb,
u8 *hdr_len, u64 *cd_type_cmd_tso_mss)
{
u64 cd_cmd, cd_tso_len, cd_mss;
union {
struct iphdr *v4;
struct ipv6hdr *v6;
unsigned char *hdr;
} ip;
union {
struct tcphdr *tcp;
struct udphdr *udp;
unsigned char *hdr;
} l4;
u32 paylen, l4_offset;
int err;
if (skb->ip_summed != CHECKSUM_PARTIAL)
return 0;
if (!skb_is_gso(skb))
return 0;
err = skb_cow_head(skb, 0);
if (err < 0)
return err;
ip.hdr = skb_network_header(skb);
l4.hdr = skb_transport_header(skb);
/* initialize outer IP header fields */
if (ip.v4->version == 4) {
ip.v4->tot_len = 0;
ip.v4->check = 0;
} else {
ip.v6->payload_len = 0;
}
if (skb_shinfo(skb)->gso_type & (SKB_GSO_UDP_TUNNEL | SKB_GSO_GRE |
SKB_GSO_UDP_TUNNEL_CSUM)) {
if (skb_shinfo(skb)->gso_type & SKB_GSO_UDP_TUNNEL_CSUM) {
/* determine offset of outer transport header */
l4_offset = l4.hdr - skb->data;
/* remove payload length from outer checksum */
paylen = (__force u16)l4.udp->check;
paylen += ntohs(1) * (u16)~(skb->len - l4_offset);
l4.udp->check = ~csum_fold((__force __wsum)paylen);
}
/* reset pointers to inner headers */
ip.hdr = skb_inner_network_header(skb);
l4.hdr = skb_inner_transport_header(skb);
/* initialize inner IP header fields */
if (ip.v4->version == 4) {
ip.v4->tot_len = 0;
ip.v4->check = 0;
} else {
ip.v6->payload_len = 0;
}
}
/* determine offset of inner transport header */
l4_offset = l4.hdr - skb->data;
/* remove payload length from inner checksum */
paylen = (__force u16)l4.tcp->check;
paylen += ntohs(1) * (u16)~(skb->len - l4_offset);
l4.tcp->check = ~csum_fold((__force __wsum)paylen);
/* compute length of segmentation header */
*hdr_len = (l4.tcp->doff * 4) + l4_offset;
/* find the field values */
cd_cmd = I40E_TX_CTX_DESC_TSO;
cd_tso_len = skb->len - *hdr_len;
cd_mss = skb_shinfo(skb)->gso_size;
*cd_type_cmd_tso_mss |= (cd_cmd << I40E_TXD_CTX_QW1_CMD_SHIFT) |
(cd_tso_len << I40E_TXD_CTX_QW1_TSO_LEN_SHIFT) |
(cd_mss << I40E_TXD_CTX_QW1_MSS_SHIFT);
return 1;
}
/**
* i40e_tsyn - set up the tsyn context descriptor
* @tx_ring: ptr to the ring to send
* @skb: ptr to the skb we're sending
* @tx_flags: the collected send information
* @cd_type_cmd_tso_mss: Quad Word 1
*
* Returns 0 if no Tx timestamp can happen and 1 if the timestamp will happen
**/
static int i40e_tsyn(struct i40e_ring *tx_ring, struct sk_buff *skb,
u32 tx_flags, u64 *cd_type_cmd_tso_mss)
{
struct i40e_pf *pf;
if (likely(!(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)))
return 0;
/* Tx timestamps cannot be sampled when doing TSO */
if (tx_flags & I40E_TX_FLAGS_TSO)
return 0;
/* only timestamp the outbound packet if the user has requested it and
* we are not already transmitting a packet to be timestamped
*/
pf = i40e_netdev_to_pf(tx_ring->netdev);
if (!(pf->flags & I40E_FLAG_PTP))
return 0;
if (pf->ptp_tx &&
!test_and_set_bit_lock(__I40E_PTP_TX_IN_PROGRESS, &pf->state)) {
skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
pf->ptp_tx_skb = skb_get(skb);
} else {
return 0;
}
*cd_type_cmd_tso_mss |= (u64)I40E_TX_CTX_DESC_TSYN <<
I40E_TXD_CTX_QW1_CMD_SHIFT;
return 1;
}
/**
* i40e_tx_enable_csum - Enable Tx checksum offloads
* @skb: send buffer
* @tx_flags: pointer to Tx flags currently set
* @td_cmd: Tx descriptor command bits to set
* @td_offset: Tx descriptor header offsets to set
* @tx_ring: Tx descriptor ring
* @cd_tunneling: ptr to context desc bits
**/
static int i40e_tx_enable_csum(struct sk_buff *skb, u32 *tx_flags,
u32 *td_cmd, u32 *td_offset,
struct i40e_ring *tx_ring,
u32 *cd_tunneling)
{
union {
struct iphdr *v4;
struct ipv6hdr *v6;
unsigned char *hdr;
} ip;
union {
struct tcphdr *tcp;
struct udphdr *udp;
unsigned char *hdr;
} l4;
unsigned char *exthdr;
u32 offset, cmd = 0, tunnel = 0;
__be16 frag_off;
u8 l4_proto = 0;
if (skb->ip_summed != CHECKSUM_PARTIAL)
return 0;
ip.hdr = skb_network_header(skb);
l4.hdr = skb_transport_header(skb);
/* compute outer L2 header size */
offset = ((ip.hdr - skb->data) / 2) << I40E_TX_DESC_LENGTH_MACLEN_SHIFT;
if (skb->encapsulation) {
/* define outer network header type */
if (*tx_flags & I40E_TX_FLAGS_IPV4) {
tunnel |= (*tx_flags & I40E_TX_FLAGS_TSO) ?
I40E_TX_CTX_EXT_IP_IPV4 :
I40E_TX_CTX_EXT_IP_IPV4_NO_CSUM;
l4_proto = ip.v4->protocol;
} else if (*tx_flags & I40E_TX_FLAGS_IPV6) {
tunnel |= I40E_TX_CTX_EXT_IP_IPV6;
exthdr = ip.hdr + sizeof(*ip.v6);
l4_proto = ip.v6->nexthdr;
if (l4.hdr != exthdr)
ipv6_skip_exthdr(skb, exthdr - skb->data,
&l4_proto, &frag_off);
}
/* compute outer L3 header size */
tunnel |= ((l4.hdr - ip.hdr) / 4) <<
I40E_TXD_CTX_QW0_EXT_IPLEN_SHIFT;
/* switch IP header pointer from outer to inner header */
ip.hdr = skb_inner_network_header(skb);
/* define outer transport */
switch (l4_proto) {
case IPPROTO_UDP:
tunnel |= I40E_TXD_CTX_UDP_TUNNELING;
*tx_flags |= I40E_TX_FLAGS_UDP_TUNNEL;
break;
case IPPROTO_GRE:
tunnel |= I40E_TXD_CTX_GRE_TUNNELING;
*tx_flags |= I40E_TX_FLAGS_UDP_TUNNEL;
break;
default:
if (*tx_flags & I40E_TX_FLAGS_TSO)
return -1;
skb_checksum_help(skb);
return 0;
}
/* compute tunnel header size */
tunnel |= ((ip.hdr - l4.hdr) / 2) <<
I40E_TXD_CTX_QW0_NATLEN_SHIFT;
/* indicate if we need to offload outer UDP header */
if ((*tx_flags & I40E_TX_FLAGS_TSO) &&
(skb_shinfo(skb)->gso_type & SKB_GSO_UDP_TUNNEL_CSUM))
tunnel |= I40E_TXD_CTX_QW0_L4T_CS_MASK;
/* record tunnel offload values */
*cd_tunneling |= tunnel;
/* switch L4 header pointer from outer to inner */
l4.hdr = skb_inner_transport_header(skb);
l4_proto = 0;
/* reset type as we transition from outer to inner headers */
*tx_flags &= ~(I40E_TX_FLAGS_IPV4 | I40E_TX_FLAGS_IPV6);
if (ip.v4->version == 4)
*tx_flags |= I40E_TX_FLAGS_IPV4;
if (ip.v6->version == 6)
*tx_flags |= I40E_TX_FLAGS_IPV6;
}
/* Enable IP checksum offloads */
if (*tx_flags & I40E_TX_FLAGS_IPV4) {
l4_proto = ip.v4->protocol;
/* the stack computes the IP header already, the only time we
* need the hardware to recompute it is in the case of TSO.
*/
cmd |= (*tx_flags & I40E_TX_FLAGS_TSO) ?
I40E_TX_DESC_CMD_IIPT_IPV4_CSUM :
I40E_TX_DESC_CMD_IIPT_IPV4;
} else if (*tx_flags & I40E_TX_FLAGS_IPV6) {
cmd |= I40E_TX_DESC_CMD_IIPT_IPV6;
exthdr = ip.hdr + sizeof(*ip.v6);
l4_proto = ip.v6->nexthdr;
if (l4.hdr != exthdr)
ipv6_skip_exthdr(skb, exthdr - skb->data,
&l4_proto, &frag_off);
}
/* compute inner L3 header size */
offset |= ((l4.hdr - ip.hdr) / 4) << I40E_TX_DESC_LENGTH_IPLEN_SHIFT;
/* Enable L4 checksum offloads */
switch (l4_proto) {
case IPPROTO_TCP:
/* enable checksum offloads */
cmd |= I40E_TX_DESC_CMD_L4T_EOFT_TCP;
offset |= l4.tcp->doff << I40E_TX_DESC_LENGTH_L4_FC_LEN_SHIFT;
break;
case IPPROTO_SCTP:
/* enable SCTP checksum offload */
cmd |= I40E_TX_DESC_CMD_L4T_EOFT_SCTP;
offset |= (sizeof(struct sctphdr) >> 2) <<
I40E_TX_DESC_LENGTH_L4_FC_LEN_SHIFT;
break;
case IPPROTO_UDP:
/* enable UDP checksum offload */
cmd |= I40E_TX_DESC_CMD_L4T_EOFT_UDP;
offset |= (sizeof(struct udphdr) >> 2) <<
I40E_TX_DESC_LENGTH_L4_FC_LEN_SHIFT;
break;
default:
if (*tx_flags & I40E_TX_FLAGS_TSO)
return -1;
skb_checksum_help(skb);
return 0;
}
*td_cmd |= cmd;
*td_offset |= offset;
return 1;
}
/**
* i40e_create_tx_ctx Build the Tx context descriptor
* @tx_ring: ring to create the descriptor on
* @cd_type_cmd_tso_mss: Quad Word 1
* @cd_tunneling: Quad Word 0 - bits 0-31
* @cd_l2tag2: Quad Word 0 - bits 32-63
**/
static void i40e_create_tx_ctx(struct i40e_ring *tx_ring,
const u64 cd_type_cmd_tso_mss,
const u32 cd_tunneling, const u32 cd_l2tag2)
{
struct i40e_tx_context_desc *context_desc;
int i = tx_ring->next_to_use;
if ((cd_type_cmd_tso_mss == I40E_TX_DESC_DTYPE_CONTEXT) &&
!cd_tunneling && !cd_l2tag2)
return;
/* grab the next descriptor */
context_desc = I40E_TX_CTXTDESC(tx_ring, i);
i++;
tx_ring->next_to_use = (i < tx_ring->count) ? i : 0;
/* cpu_to_le32 and assign to struct fields */
context_desc->tunneling_params = cpu_to_le32(cd_tunneling);
context_desc->l2tag2 = cpu_to_le16(cd_l2tag2);
context_desc->rsvd = cpu_to_le16(0);
context_desc->type_cmd_tso_mss = cpu_to_le64(cd_type_cmd_tso_mss);
}
/**
* __i40e_maybe_stop_tx - 2nd level check for tx stop conditions
* @tx_ring: the ring to be checked
* @size: the size buffer we want to assure is available
*
* Returns -EBUSY if a stop is needed, else 0
**/
int __i40e_maybe_stop_tx(struct i40e_ring *tx_ring, int size)
{
netif_stop_subqueue(tx_ring->netdev, tx_ring->queue_index);
/* Memory barrier before checking head and tail */
smp_mb();
/* Check again in a case another CPU has just made room available. */
if (likely(I40E_DESC_UNUSED(tx_ring) < size))
return -EBUSY;
/* A reprieve! - use start_queue because it doesn't call schedule */
netif_start_subqueue(tx_ring->netdev, tx_ring->queue_index);
++tx_ring->tx_stats.restart_queue;
return 0;
}
/**
* __i40e_chk_linearize - Check if there are more than 8 fragments per packet
* @skb: send buffer
*
* Note: Our HW can't scatter-gather more than 8 fragments to build
* a packet on the wire and so we need to figure out the cases where we
* need to linearize the skb.
**/
bool __i40e_chk_linearize(struct sk_buff *skb)
{
const struct skb_frag_struct *frag, *stale;
int gso_size, nr_frags, sum;
/* check to see if TSO is enabled, if so we may get a repreive */
gso_size = skb_shinfo(skb)->gso_size;
if (unlikely(!gso_size))
return true;
/* no need to check if number of frags is less than 8 */
nr_frags = skb_shinfo(skb)->nr_frags;
if (nr_frags < I40E_MAX_BUFFER_TXD)
return false;
/* We need to walk through the list and validate that each group
* of 6 fragments totals at least gso_size. However we don't need
* to perform such validation on the first or last 6 since the first
* 6 cannot inherit any data from a descriptor before them, and the
* last 6 cannot inherit any data from a descriptor after them.
*/
nr_frags -= I40E_MAX_BUFFER_TXD - 1;
frag = &skb_shinfo(skb)->frags[0];
/* Initialize size to the negative value of gso_size minus 1. We
* use this as the worst case scenerio in which the frag ahead
* of us only provides one byte which is why we are limited to 6
* descriptors for a single transmit as the header and previous
* fragment are already consuming 2 descriptors.
*/
sum = 1 - gso_size;
/* Add size of frags 1 through 5 to create our initial sum */
sum += skb_frag_size(++frag);
sum += skb_frag_size(++frag);
sum += skb_frag_size(++frag);
sum += skb_frag_size(++frag);
sum += skb_frag_size(++frag);
/* Walk through fragments adding latest fragment, testing it, and
* then removing stale fragments from the sum.
*/
stale = &skb_shinfo(skb)->frags[0];
for (;;) {
sum += skb_frag_size(++frag);
/* if sum is negative we failed to make sufficient progress */
if (sum < 0)
return true;
/* use pre-decrement to avoid processing last fragment */
if (!--nr_frags)
break;
sum -= skb_frag_size(++stale);
}
return false;
}
/**
* i40e_tx_map - Build the Tx descriptor
* @tx_ring: ring to send buffer on
* @skb: send buffer
* @first: first buffer info buffer to use
* @tx_flags: collected send information
* @hdr_len: size of the packet header
* @td_cmd: the command field in the descriptor
* @td_offset: offset for checksum or crc
**/
#ifdef I40E_FCOE
inline void i40e_tx_map(struct i40e_ring *tx_ring, struct sk_buff *skb,
struct i40e_tx_buffer *first, u32 tx_flags,
const u8 hdr_len, u32 td_cmd, u32 td_offset)
#else
static inline void i40e_tx_map(struct i40e_ring *tx_ring, struct sk_buff *skb,
struct i40e_tx_buffer *first, u32 tx_flags,
const u8 hdr_len, u32 td_cmd, u32 td_offset)
#endif
{
unsigned int data_len = skb->data_len;
unsigned int size = skb_headlen(skb);
struct skb_frag_struct *frag;
struct i40e_tx_buffer *tx_bi;
struct i40e_tx_desc *tx_desc;
u16 i = tx_ring->next_to_use;
u32 td_tag = 0;
dma_addr_t dma;
u16 gso_segs;
u16 desc_count = 0;
bool tail_bump = true;
bool do_rs = false;
if (tx_flags & I40E_TX_FLAGS_HW_VLAN) {
td_cmd |= I40E_TX_DESC_CMD_IL2TAG1;
td_tag = (tx_flags & I40E_TX_FLAGS_VLAN_MASK) >>
I40E_TX_FLAGS_VLAN_SHIFT;
}
if (tx_flags & (I40E_TX_FLAGS_TSO | I40E_TX_FLAGS_FSO))
gso_segs = skb_shinfo(skb)->gso_segs;
else
gso_segs = 1;
/* multiply data chunks by size of headers */
first->bytecount = skb->len - hdr_len + (gso_segs * hdr_len);
first->gso_segs = gso_segs;
first->skb = skb;
first->tx_flags = tx_flags;
dma = dma_map_single(tx_ring->dev, skb->data, size, DMA_TO_DEVICE);
tx_desc = I40E_TX_DESC(tx_ring, i);
tx_bi = first;
for (frag = &skb_shinfo(skb)->frags[0];; frag++) {
i40e/i40evf: Allow up to 12K bytes of data per Tx descriptor instead of 8K From what I can tell the practical limitation on the size of the Tx data buffer is the fact that the Tx descriptor is limited to 14 bits. As such we cannot use 16K as is typically used on the other Intel drivers. However artificially limiting ourselves to 8K can be expensive as this means that we will consume up to 10 descriptors (1 context, 1 for header, and 9 for payload, non-8K aligned) in a single send. I propose that we can reduce this by increasing the maximum data for a 4K aligned block to 12K. We can reduce the descriptors used for a 32K aligned block by 1 by increasing the size like this. In addition we still have the 4K - 1 of space that is still unused. We can use this as a bit of extra padding when dealing with data that is not aligned to 4K. By aligning the descriptors after the first to 4K we can improve the efficiency of PCIe accesses as we can avoid using byte enables and can fetch full TLP transactions after the first fetch of the buffer. This helps to improve PCIe efficiency. Below is the results of testing before and after with this patch: Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % U us/KB us/KB Before: 87380 16384 16384 10.00 33682.24 20.27 -1.00 0.592 -1.00 After: 87380 16384 16384 10.00 34204.08 20.54 -1.00 0.590 -1.00 So the net result of this patch is that we have a small gain in throughput due to a reduction in overhead for putting together the frame. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-19 13:17:08 -07:00
unsigned int max_data = I40E_MAX_DATA_PER_TXD_ALIGNED;
if (dma_mapping_error(tx_ring->dev, dma))
goto dma_error;
/* record length, and DMA address */
dma_unmap_len_set(tx_bi, len, size);
dma_unmap_addr_set(tx_bi, dma, dma);
i40e/i40evf: Allow up to 12K bytes of data per Tx descriptor instead of 8K From what I can tell the practical limitation on the size of the Tx data buffer is the fact that the Tx descriptor is limited to 14 bits. As such we cannot use 16K as is typically used on the other Intel drivers. However artificially limiting ourselves to 8K can be expensive as this means that we will consume up to 10 descriptors (1 context, 1 for header, and 9 for payload, non-8K aligned) in a single send. I propose that we can reduce this by increasing the maximum data for a 4K aligned block to 12K. We can reduce the descriptors used for a 32K aligned block by 1 by increasing the size like this. In addition we still have the 4K - 1 of space that is still unused. We can use this as a bit of extra padding when dealing with data that is not aligned to 4K. By aligning the descriptors after the first to 4K we can improve the efficiency of PCIe accesses as we can avoid using byte enables and can fetch full TLP transactions after the first fetch of the buffer. This helps to improve PCIe efficiency. Below is the results of testing before and after with this patch: Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % U us/KB us/KB Before: 87380 16384 16384 10.00 33682.24 20.27 -1.00 0.592 -1.00 After: 87380 16384 16384 10.00 34204.08 20.54 -1.00 0.590 -1.00 So the net result of this patch is that we have a small gain in throughput due to a reduction in overhead for putting together the frame. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-19 13:17:08 -07:00
/* align size to end of page */
max_data += -dma & (I40E_MAX_READ_REQ_SIZE - 1);
tx_desc->buffer_addr = cpu_to_le64(dma);
while (unlikely(size > I40E_MAX_DATA_PER_TXD)) {
tx_desc->cmd_type_offset_bsz =
build_ctob(td_cmd, td_offset,
i40e/i40evf: Allow up to 12K bytes of data per Tx descriptor instead of 8K From what I can tell the practical limitation on the size of the Tx data buffer is the fact that the Tx descriptor is limited to 14 bits. As such we cannot use 16K as is typically used on the other Intel drivers. However artificially limiting ourselves to 8K can be expensive as this means that we will consume up to 10 descriptors (1 context, 1 for header, and 9 for payload, non-8K aligned) in a single send. I propose that we can reduce this by increasing the maximum data for a 4K aligned block to 12K. We can reduce the descriptors used for a 32K aligned block by 1 by increasing the size like this. In addition we still have the 4K - 1 of space that is still unused. We can use this as a bit of extra padding when dealing with data that is not aligned to 4K. By aligning the descriptors after the first to 4K we can improve the efficiency of PCIe accesses as we can avoid using byte enables and can fetch full TLP transactions after the first fetch of the buffer. This helps to improve PCIe efficiency. Below is the results of testing before and after with this patch: Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % U us/KB us/KB Before: 87380 16384 16384 10.00 33682.24 20.27 -1.00 0.592 -1.00 After: 87380 16384 16384 10.00 34204.08 20.54 -1.00 0.590 -1.00 So the net result of this patch is that we have a small gain in throughput due to a reduction in overhead for putting together the frame. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-19 13:17:08 -07:00
max_data, td_tag);
tx_desc++;
i++;
desc_count++;
if (i == tx_ring->count) {
tx_desc = I40E_TX_DESC(tx_ring, 0);
i = 0;
}
i40e/i40evf: Allow up to 12K bytes of data per Tx descriptor instead of 8K From what I can tell the practical limitation on the size of the Tx data buffer is the fact that the Tx descriptor is limited to 14 bits. As such we cannot use 16K as is typically used on the other Intel drivers. However artificially limiting ourselves to 8K can be expensive as this means that we will consume up to 10 descriptors (1 context, 1 for header, and 9 for payload, non-8K aligned) in a single send. I propose that we can reduce this by increasing the maximum data for a 4K aligned block to 12K. We can reduce the descriptors used for a 32K aligned block by 1 by increasing the size like this. In addition we still have the 4K - 1 of space that is still unused. We can use this as a bit of extra padding when dealing with data that is not aligned to 4K. By aligning the descriptors after the first to 4K we can improve the efficiency of PCIe accesses as we can avoid using byte enables and can fetch full TLP transactions after the first fetch of the buffer. This helps to improve PCIe efficiency. Below is the results of testing before and after with this patch: Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % U us/KB us/KB Before: 87380 16384 16384 10.00 33682.24 20.27 -1.00 0.592 -1.00 After: 87380 16384 16384 10.00 34204.08 20.54 -1.00 0.590 -1.00 So the net result of this patch is that we have a small gain in throughput due to a reduction in overhead for putting together the frame. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-19 13:17:08 -07:00
dma += max_data;
size -= max_data;
i40e/i40evf: Allow up to 12K bytes of data per Tx descriptor instead of 8K From what I can tell the practical limitation on the size of the Tx data buffer is the fact that the Tx descriptor is limited to 14 bits. As such we cannot use 16K as is typically used on the other Intel drivers. However artificially limiting ourselves to 8K can be expensive as this means that we will consume up to 10 descriptors (1 context, 1 for header, and 9 for payload, non-8K aligned) in a single send. I propose that we can reduce this by increasing the maximum data for a 4K aligned block to 12K. We can reduce the descriptors used for a 32K aligned block by 1 by increasing the size like this. In addition we still have the 4K - 1 of space that is still unused. We can use this as a bit of extra padding when dealing with data that is not aligned to 4K. By aligning the descriptors after the first to 4K we can improve the efficiency of PCIe accesses as we can avoid using byte enables and can fetch full TLP transactions after the first fetch of the buffer. This helps to improve PCIe efficiency. Below is the results of testing before and after with this patch: Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % U us/KB us/KB Before: 87380 16384 16384 10.00 33682.24 20.27 -1.00 0.592 -1.00 After: 87380 16384 16384 10.00 34204.08 20.54 -1.00 0.590 -1.00 So the net result of this patch is that we have a small gain in throughput due to a reduction in overhead for putting together the frame. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-19 13:17:08 -07:00
max_data = I40E_MAX_DATA_PER_TXD_ALIGNED;
tx_desc->buffer_addr = cpu_to_le64(dma);
}
if (likely(!data_len))
break;
tx_desc->cmd_type_offset_bsz = build_ctob(td_cmd, td_offset,
size, td_tag);
tx_desc++;
i++;
desc_count++;
if (i == tx_ring->count) {
tx_desc = I40E_TX_DESC(tx_ring, 0);
i = 0;
}
size = skb_frag_size(frag);
data_len -= size;
dma = skb_frag_dma_map(tx_ring->dev, frag, 0, size,
DMA_TO_DEVICE);
tx_bi = &tx_ring->tx_bi[i];
}
/* set next_to_watch value indicating a packet is present */
first->next_to_watch = tx_desc;
i++;
if (i == tx_ring->count)
i = 0;
tx_ring->next_to_use = i;
netdev_tx_sent_queue(netdev_get_tx_queue(tx_ring->netdev,
tx_ring->queue_index),
first->bytecount);
i40e_maybe_stop_tx(tx_ring, DESC_NEEDED);
/* Algorithm to optimize tail and RS bit setting:
* if xmit_more is supported
* if xmit_more is true
* do not update tail and do not mark RS bit.
* if xmit_more is false and last xmit_more was false
* if every packet spanned less than 4 desc
* then set RS bit on 4th packet and update tail
* on every packet
* else
* update tail and set RS bit on every packet.
* if xmit_more is false and last_xmit_more was true
* update tail and set RS bit.
*
* Optimization: wmb to be issued only in case of tail update.
* Also optimize the Descriptor WB path for RS bit with the same
* algorithm.
*
* Note: If there are less than 4 packets
* pending and interrupts were disabled the service task will
* trigger a force WB.
*/
if (skb->xmit_more &&
!netif_xmit_stopped(netdev_get_tx_queue(tx_ring->netdev,
tx_ring->queue_index))) {
tx_ring->flags |= I40E_TXR_FLAGS_LAST_XMIT_MORE_SET;
tail_bump = false;
} else if (!skb->xmit_more &&
!netif_xmit_stopped(netdev_get_tx_queue(tx_ring->netdev,
tx_ring->queue_index)) &&
(!(tx_ring->flags & I40E_TXR_FLAGS_LAST_XMIT_MORE_SET)) &&
(tx_ring->packet_stride < WB_STRIDE) &&
(desc_count < WB_STRIDE)) {
tx_ring->packet_stride++;
} else {
tx_ring->packet_stride = 0;
tx_ring->flags &= ~I40E_TXR_FLAGS_LAST_XMIT_MORE_SET;
do_rs = true;
}
if (do_rs)
tx_ring->packet_stride = 0;
tx_desc->cmd_type_offset_bsz =
build_ctob(td_cmd, td_offset, size, td_tag) |
cpu_to_le64((u64)(do_rs ? I40E_TXD_CMD :
I40E_TX_DESC_CMD_EOP) <<
I40E_TXD_QW1_CMD_SHIFT);
/* notify HW of packet */
if (!tail_bump)
prefetchw(tx_desc + 1);
if (tail_bump) {
/* Force memory writes to complete before letting h/w
* know there are new descriptors to fetch. (Only
* applicable for weak-ordered memory model archs,
* such as IA-64).
*/
wmb();
writel(i, tx_ring->tail);
}
return;
dma_error:
dev_info(tx_ring->dev, "TX DMA map failed\n");
/* clear dma mappings for failed tx_bi map */
for (;;) {
tx_bi = &tx_ring->tx_bi[i];
i40e_unmap_and_free_tx_resource(tx_ring, tx_bi);
if (tx_bi == first)
break;
if (i == 0)
i = tx_ring->count;
i--;
}
tx_ring->next_to_use = i;
}
/**
* i40e_xmit_frame_ring - Sends buffer on Tx ring
* @skb: send buffer
* @tx_ring: ring to send buffer on
*
* Returns NETDEV_TX_OK if sent, else an error code
**/
static netdev_tx_t i40e_xmit_frame_ring(struct sk_buff *skb,
struct i40e_ring *tx_ring)
{
u64 cd_type_cmd_tso_mss = I40E_TX_DESC_DTYPE_CONTEXT;
u32 cd_tunneling = 0, cd_l2tag2 = 0;
struct i40e_tx_buffer *first;
u32 td_offset = 0;
u32 tx_flags = 0;
__be16 protocol;
u32 td_cmd = 0;
u8 hdr_len = 0;
int tso, count;
int tsyn;
/* prefetch the data, we'll need it later */
prefetch(skb->data);
count = i40e_xmit_descriptor_count(skb);
if (i40e_chk_linearize(skb, count)) {
if (__skb_linearize(skb))
goto out_drop;
i40e/i40evf: Allow up to 12K bytes of data per Tx descriptor instead of 8K From what I can tell the practical limitation on the size of the Tx data buffer is the fact that the Tx descriptor is limited to 14 bits. As such we cannot use 16K as is typically used on the other Intel drivers. However artificially limiting ourselves to 8K can be expensive as this means that we will consume up to 10 descriptors (1 context, 1 for header, and 9 for payload, non-8K aligned) in a single send. I propose that we can reduce this by increasing the maximum data for a 4K aligned block to 12K. We can reduce the descriptors used for a 32K aligned block by 1 by increasing the size like this. In addition we still have the 4K - 1 of space that is still unused. We can use this as a bit of extra padding when dealing with data that is not aligned to 4K. By aligning the descriptors after the first to 4K we can improve the efficiency of PCIe accesses as we can avoid using byte enables and can fetch full TLP transactions after the first fetch of the buffer. This helps to improve PCIe efficiency. Below is the results of testing before and after with this patch: Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % U us/KB us/KB Before: 87380 16384 16384 10.00 33682.24 20.27 -1.00 0.592 -1.00 After: 87380 16384 16384 10.00 34204.08 20.54 -1.00 0.590 -1.00 So the net result of this patch is that we have a small gain in throughput due to a reduction in overhead for putting together the frame. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-19 13:17:08 -07:00
count = i40e_txd_use_count(skb->len);
tx_ring->tx_stats.tx_linearize++;
}
/* need: 1 descriptor per page * PAGE_SIZE/I40E_MAX_DATA_PER_TXD,
* + 1 desc for skb_head_len/I40E_MAX_DATA_PER_TXD,
* + 4 desc gap to avoid the cache line where head is,
* + 1 desc for context descriptor,
* otherwise try next time
*/
if (i40e_maybe_stop_tx(tx_ring, count + 4 + 1)) {
tx_ring->tx_stats.tx_busy++;
return NETDEV_TX_BUSY;
}
/* prepare the xmit flags */
if (i40e_tx_prepare_vlan_flags(skb, tx_ring, &tx_flags))
goto out_drop;
/* obtain protocol of skb */
protocol = vlan_get_protocol(skb);
/* record the location of the first descriptor for this packet */
first = &tx_ring->tx_bi[tx_ring->next_to_use];
/* setup IPv4/IPv6 offloads */
if (protocol == htons(ETH_P_IP))
tx_flags |= I40E_TX_FLAGS_IPV4;
else if (protocol == htons(ETH_P_IPV6))
tx_flags |= I40E_TX_FLAGS_IPV6;
tso = i40e_tso(tx_ring, skb, &hdr_len, &cd_type_cmd_tso_mss);
if (tso < 0)
goto out_drop;
else if (tso)
tx_flags |= I40E_TX_FLAGS_TSO;
/* Always offload the checksum, since it's in the data descriptor */
tso = i40e_tx_enable_csum(skb, &tx_flags, &td_cmd, &td_offset,
tx_ring, &cd_tunneling);
if (tso < 0)
goto out_drop;
tsyn = i40e_tsyn(tx_ring, skb, tx_flags, &cd_type_cmd_tso_mss);
if (tsyn)
tx_flags |= I40E_TX_FLAGS_TSYN;
skb_tx_timestamp(skb);
/* always enable CRC insertion offload */
td_cmd |= I40E_TX_DESC_CMD_ICRC;
i40e_create_tx_ctx(tx_ring, cd_type_cmd_tso_mss,
cd_tunneling, cd_l2tag2);
/* Add Flow Director ATR if it's enabled.
*
* NOTE: this must always be directly before the data descriptor.
*/
i40e_atr(tx_ring, skb, tx_flags);
i40e_tx_map(tx_ring, skb, first, tx_flags, hdr_len,
td_cmd, td_offset);
return NETDEV_TX_OK;
out_drop:
dev_kfree_skb_any(skb);
return NETDEV_TX_OK;
}
/**
* i40e_lan_xmit_frame - Selects the correct VSI and Tx queue to send buffer
* @skb: send buffer
* @netdev: network interface device structure
*
* Returns NETDEV_TX_OK if sent, else an error code
**/
netdev_tx_t i40e_lan_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
{
struct i40e_netdev_priv *np = netdev_priv(netdev);
struct i40e_vsi *vsi = np->vsi;
struct i40e_ring *tx_ring = vsi->tx_rings[skb->queue_mapping];
/* hardware can't handle really short frames, hardware padding works
* beyond this point
*/
if (skb_put_padto(skb, I40E_MIN_TX_LEN))
return NETDEV_TX_OK;
return i40e_xmit_frame_ring(skb, tx_ring);
}