alistair23-linux/arch/ppc/platforms/sbc82xx.c

257 lines
6.8 KiB
C
Raw Normal View History

/*
* SBC82XX platform support
*
* Author: Guy Streeter <streeter@redhat.com>
*
* Derived from: est8260_setup.c by Allen Curtis, ONZ
*
* Copyright 2004 Red Hat, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/stddef.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <asm/mpc8260.h>
#include <asm/machdep.h>
#include <asm/io.h>
#include <asm/todc.h>
#include <asm/immap_cpm2.h>
#include <asm/pci.h>
static void (*callback_init_IRQ)(void);
extern unsigned char __res[sizeof(bd_t)];
extern void (*late_time_init)(void);
#ifdef CONFIG_GEN_RTC
TODC_ALLOC();
/*
* Timer init happens before mem_init but after paging init, so we cannot
* directly use ioremap() at that time.
* late_time_init() is call after paging init.
*/
static void sbc82xx_time_init(void)
{
volatile memctl_cpm2_t *mc = &cpm2_immr->im_memctl;
/* Set up CS11 for RTC chip */
mc->memc_br11=0;
mc->memc_or11=0xffff0836;
mc->memc_br11=SBC82xx_TODC_NVRAM_ADDR | 0x0801;
TODC_INIT(TODC_TYPE_MK48T59, 0, 0, SBC82xx_TODC_NVRAM_ADDR, 0);
todc_info->nvram_data =
(unsigned int)ioremap(todc_info->nvram_data, 0x2000);
BUG_ON(!todc_info->nvram_data);
ppc_md.get_rtc_time = todc_get_rtc_time;
ppc_md.set_rtc_time = todc_set_rtc_time;
ppc_md.nvram_read_val = todc_direct_read_val;
ppc_md.nvram_write_val = todc_direct_write_val;
todc_time_init();
}
#endif /* CONFIG_GEN_RTC */
static volatile char *sbc82xx_i8259_map;
static char sbc82xx_i8259_mask = 0xff;
static DEFINE_SPINLOCK(sbc82xx_i8259_lock);
static void sbc82xx_i8259_mask_and_ack_irq(unsigned int irq_nr)
{
unsigned long flags;
irq_nr -= NR_SIU_INTS;
spin_lock_irqsave(&sbc82xx_i8259_lock, flags);
sbc82xx_i8259_mask |= 1 << irq_nr;
(void) sbc82xx_i8259_map[1]; /* Dummy read */
sbc82xx_i8259_map[1] = sbc82xx_i8259_mask;
sbc82xx_i8259_map[0] = 0x20; /* OCW2: Non-specific EOI */
spin_unlock_irqrestore(&sbc82xx_i8259_lock, flags);
}
static void sbc82xx_i8259_mask_irq(unsigned int irq_nr)
{
unsigned long flags;
irq_nr -= NR_SIU_INTS;
spin_lock_irqsave(&sbc82xx_i8259_lock, flags);
sbc82xx_i8259_mask |= 1 << irq_nr;
sbc82xx_i8259_map[1] = sbc82xx_i8259_mask;
spin_unlock_irqrestore(&sbc82xx_i8259_lock, flags);
}
static void sbc82xx_i8259_unmask_irq(unsigned int irq_nr)
{
unsigned long flags;
irq_nr -= NR_SIU_INTS;
spin_lock_irqsave(&sbc82xx_i8259_lock, flags);
sbc82xx_i8259_mask &= ~(1 << irq_nr);
sbc82xx_i8259_map[1] = sbc82xx_i8259_mask;
spin_unlock_irqrestore(&sbc82xx_i8259_lock, flags);
}
static void sbc82xx_i8259_end_irq(unsigned int irq)
{
if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))
&& irq_desc[irq].action)
sbc82xx_i8259_unmask_irq(irq);
}
struct hw_interrupt_type sbc82xx_i8259_ic = {
.typename = " i8259 ",
.enable = sbc82xx_i8259_unmask_irq,
.disable = sbc82xx_i8259_mask_irq,
.ack = sbc82xx_i8259_mask_and_ack_irq,
.end = sbc82xx_i8259_end_irq,
};
static irqreturn_t sbc82xx_i8259_demux(int irq, void *dev_id)
{
spin_lock(&sbc82xx_i8259_lock);
sbc82xx_i8259_map[0] = 0x0c; /* OCW3: Read IR register on RD# pulse */
irq = sbc82xx_i8259_map[0] & 7; /* Read IRR */
if (irq == 7) {
/* Possible spurious interrupt */
int isr;
sbc82xx_i8259_map[0] = 0x0b; /* OCW3: Read IS register on RD# pulse */
isr = sbc82xx_i8259_map[0]; /* Read ISR */
if (!(isr & 0x80)) {
printk(KERN_INFO "Spurious i8259 interrupt\n");
return IRQ_HANDLED;
}
}
__do_IRQ(NR_SIU_INTS + irq);
return IRQ_HANDLED;
}
static struct irqaction sbc82xx_i8259_irqaction = {
.handler = sbc82xx_i8259_demux,
.flags = IRQF_DISABLED,
.mask = CPU_MASK_NONE,
.name = "i8259 demux",
};
void __init sbc82xx_init_IRQ(void)
{
volatile memctl_cpm2_t *mc = &cpm2_immr->im_memctl;
volatile intctl_cpm2_t *ic = &cpm2_immr->im_intctl;
int i;
callback_init_IRQ();
/* u-boot doesn't always set the board up correctly */
mc->memc_br5 = 0;
mc->memc_or5 = 0xfff00856;
mc->memc_br5 = 0x22000801;
sbc82xx_i8259_map = ioremap(0x22008000, 2);
if (!sbc82xx_i8259_map) {
printk(KERN_CRIT "Mapping i8259 interrupt controller failed\n");
return;
}
/* Set up the interrupt handlers for the i8259 IRQs */
for (i = NR_SIU_INTS; i < NR_SIU_INTS + 8; i++) {
[PATCH] genirq: rename desc->handler to desc->chip This patch-queue improves the generic IRQ layer to be truly generic, by adding various abstractions and features to it, without impacting existing functionality. While the queue can be best described as "fix and improve everything in the generic IRQ layer that we could think of", and thus it consists of many smaller features and lots of cleanups, the one feature that stands out most is the new 'irq chip' abstraction. The irq-chip abstraction is about describing and coding and IRQ controller driver by mapping its raw hardware capabilities [and quirks, if needed] in a straightforward way, without having to think about "IRQ flow" (level/edge/etc.) type of details. This stands in contrast with the current 'irq-type' model of genirq architectures, which 'mixes' raw hardware capabilities with 'flow' details. The patchset supports both types of irq controller designs at once, and converts i386 and x86_64 to the new irq-chip design. As a bonus side-effect of the irq-chip approach, chained interrupt controllers (master/slave PIC constructs, etc.) are now supported by design as well. The end result of this patchset intends to be simpler architecture-level code and more consolidation between architectures. We reused many bits of code and many concepts from Russell King's ARM IRQ layer, the merging of which was one of the motivations for this patchset. This patch: rename desc->handler to desc->chip. Originally i did not want to do this, because it's a big patch. But having both "desc->handler", "desc->handle_irq" and "action->handler" caused a large degree of confusion and made the code appear alot less clean than it truly is. I have also attempted a dual approach as well by introducing a desc->chip alias - but that just wasnt robust enough and broke frequently. So lets get over with this quickly. The conversion was done automatically via scripts and converts all the code in the kernel. This renaming patch is the first one amongst the patches, so that the remaining patches can stay flexible and can be merged and split up without having some big monolithic patch act as a merge barrier. [akpm@osdl.org: build fix] [akpm@osdl.org: another build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-29 03:24:36 -06:00
irq_desc[i].chip = &sbc82xx_i8259_ic;
irq_desc[i].status |= IRQ_LEVEL;
}
/* make IRQ6 level sensitive */
ic->ic_siexr &= ~(1 << (14 - (SIU_INT_IRQ6 - SIU_INT_IRQ1)));
irq_desc[SIU_INT_IRQ6].status |= IRQ_LEVEL;
/* Initialise the i8259 */
sbc82xx_i8259_map[0] = 0x1b; /* ICW1: Level, no cascade, ICW4 */
sbc82xx_i8259_map[1] = 0x00; /* ICW2: vector base */
/* No ICW3 (no cascade) */
sbc82xx_i8259_map[1] = 0x01; /* ICW4: 8086 mode, normal EOI */
sbc82xx_i8259_map[0] = 0x0b; /* OCW3: Read IS register on RD# pulse */
sbc82xx_i8259_map[1] = sbc82xx_i8259_mask; /* Set interrupt mask */
/* Request cascade IRQ */
if (setup_irq(SIU_INT_IRQ6, &sbc82xx_i8259_irqaction)) {
printk("Installation of i8259 IRQ demultiplexer failed.\n");
}
}
static int sbc82xx_pci_map_irq(struct pci_dev *dev, unsigned char idsel,
unsigned char pin)
{
static char pci_irq_table[][4] = {
/*
* PCI IDSEL/INTPIN->INTLINE
* A B C D
*/
{ SBC82xx_PIRQA, SBC82xx_PIRQB, SBC82xx_PIRQC, SBC82xx_PIRQD }, /* IDSEL 16 - PMC slot */
{ SBC82xx_PC_IRQA, SBC82xx_PC_IRQB, -1, -1 }, /* IDSEL 17 - CardBus */
{ SBC82xx_PIRQA, SBC82xx_PIRQB, SBC82xx_PIRQC, SBC82xx_PIRQD }, /* IDSEL 18 - PCI-X bridge */
};
const long min_idsel = 16, max_idsel = 18, irqs_per_slot = 4;
return PCI_IRQ_TABLE_LOOKUP;
}
static void __devinit quirk_sbc8260_cardbus(struct pci_dev *pdev)
{
uint32_t ctrl;
if (pdev->bus->number != 0 || pdev->devfn != PCI_DEVFN(17, 0))
return;
printk(KERN_INFO "Setting up CardBus controller\n");
/* Set P2CCLK bit in System Control Register */
pci_read_config_dword(pdev, 0x80, &ctrl);
ctrl |= (1<<27);
pci_write_config_dword(pdev, 0x80, ctrl);
/* Set MFUNC up for PCI IRQ routing via INTA and INTB, and LEDs. */
pci_write_config_dword(pdev, 0x8c, 0x00c01d22);
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1420, quirk_sbc8260_cardbus);
void __init
m82xx_board_init(void)
{
/* u-boot may be using one of the FCC Ethernet devices.
Use the MAC address to the SCC. */
__res[offsetof(bd_t, bi_enetaddr[5])] &= ~3;
/* Anything special for this platform */
callback_init_IRQ = ppc_md.init_IRQ;
ppc_md.init_IRQ = sbc82xx_init_IRQ;
ppc_md.pci_map_irq = sbc82xx_pci_map_irq;
#ifdef CONFIG_GEN_RTC
ppc_md.time_init = NULL;
ppc_md.get_rtc_time = NULL;
ppc_md.set_rtc_time = NULL;
ppc_md.nvram_read_val = NULL;
ppc_md.nvram_write_val = NULL;
late_time_init = sbc82xx_time_init;
#endif /* CONFIG_GEN_RTC */
}