1
0
Fork 0
alistair23-linux/drivers/misc/mei/hw-me.c

1436 lines
32 KiB
C
Raw Normal View History

staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
/*
*
* Intel Management Engine Interface (Intel MEI) Linux driver
* Copyright (c) 2003-2012, Intel Corporation.
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
*/
#include <linux/pci.h>
#include <linux/kthread.h>
#include <linux/interrupt.h>
#include <linux/pm_runtime.h>
#include "mei_dev.h"
#include "hbm.h"
#include "hw-me.h"
#include "hw-me-regs.h"
#include "mei-trace.h"
/**
* mei_me_reg_read - Reads 32bit data from the mei device
*
* @hw: the me hardware structure
* @offset: offset from which to read the data
*
* Return: register value (u32)
*/
static inline u32 mei_me_reg_read(const struct mei_me_hw *hw,
unsigned long offset)
{
return ioread32(hw->mem_addr + offset);
}
/**
* mei_me_reg_write - Writes 32bit data to the mei device
*
* @hw: the me hardware structure
* @offset: offset from which to write the data
* @value: register value to write (u32)
*/
static inline void mei_me_reg_write(const struct mei_me_hw *hw,
unsigned long offset, u32 value)
{
iowrite32(value, hw->mem_addr + offset);
}
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
/**
* mei_me_mecbrw_read - Reads 32bit data from ME circular buffer
* read window register
*
* @dev: the device structure
*
* Return: ME_CB_RW register value (u32)
*/
static inline u32 mei_me_mecbrw_read(const struct mei_device *dev)
{
return mei_me_reg_read(to_me_hw(dev), ME_CB_RW);
}
/**
* mei_me_hcbww_write - write 32bit data to the host circular buffer
*
* @dev: the device structure
* @data: 32bit data to be written to the host circular buffer
*/
static inline void mei_me_hcbww_write(struct mei_device *dev, u32 data)
{
mei_me_reg_write(to_me_hw(dev), H_CB_WW, data);
}
/**
* mei_me_mecsr_read - Reads 32bit data from the ME CSR
*
* @dev: the device structure
*
* Return: ME_CSR_HA register value (u32)
*/
static inline u32 mei_me_mecsr_read(const struct mei_device *dev)
{
u32 reg;
reg = mei_me_reg_read(to_me_hw(dev), ME_CSR_HA);
trace_mei_reg_read(dev->dev, "ME_CSR_HA", ME_CSR_HA, reg);
return reg;
}
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
/**
* mei_hcsr_read - Reads 32bit data from the host CSR
*
* @dev: the device structure
*
* Return: H_CSR register value (u32)
*/
static inline u32 mei_hcsr_read(const struct mei_device *dev)
{
u32 reg;
reg = mei_me_reg_read(to_me_hw(dev), H_CSR);
trace_mei_reg_read(dev->dev, "H_CSR", H_CSR, reg);
return reg;
}
/**
* mei_hcsr_write - writes H_CSR register to the mei device
*
* @dev: the device structure
* @reg: new register value
*/
static inline void mei_hcsr_write(struct mei_device *dev, u32 reg)
{
trace_mei_reg_write(dev->dev, "H_CSR", H_CSR, reg);
mei_me_reg_write(to_me_hw(dev), H_CSR, reg);
}
/**
* mei_hcsr_set - writes H_CSR register to the mei device,
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
* and ignores the H_IS bit for it is write-one-to-zero.
*
* @dev: the device structure
* @reg: new register value
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
*/
static inline void mei_hcsr_set(struct mei_device *dev, u32 reg)
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
{
reg &= ~H_CSR_IS_MASK;
mei_hcsr_write(dev, reg);
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
}
/**
* mei_hcsr_set_hig - set host interrupt (set H_IG)
*
* @dev: the device structure
*/
static inline void mei_hcsr_set_hig(struct mei_device *dev)
{
u32 hcsr;
hcsr = mei_hcsr_read(dev) | H_IG;
mei_hcsr_set(dev, hcsr);
}
/**
* mei_me_d0i3c_read - Reads 32bit data from the D0I3C register
*
* @dev: the device structure
*
* Return: H_D0I3C register value (u32)
*/
static inline u32 mei_me_d0i3c_read(const struct mei_device *dev)
{
u32 reg;
reg = mei_me_reg_read(to_me_hw(dev), H_D0I3C);
trace_mei_reg_read(dev->dev, "H_D0I3C", H_D0I3C, reg);
return reg;
}
/**
* mei_me_d0i3c_write - writes H_D0I3C register to device
*
* @dev: the device structure
* @reg: new register value
*/
static inline void mei_me_d0i3c_write(struct mei_device *dev, u32 reg)
{
trace_mei_reg_write(dev->dev, "H_D0I3C", H_D0I3C, reg);
mei_me_reg_write(to_me_hw(dev), H_D0I3C, reg);
}
/**
* mei_me_fw_status - read fw status register from pci config space
*
* @dev: mei device
* @fw_status: fw status register values
*
* Return: 0 on success, error otherwise
*/
static int mei_me_fw_status(struct mei_device *dev,
struct mei_fw_status *fw_status)
{
struct pci_dev *pdev = to_pci_dev(dev->dev);
struct mei_me_hw *hw = to_me_hw(dev);
const struct mei_fw_status *fw_src = &hw->cfg->fw_status;
int ret;
int i;
if (!fw_status)
return -EINVAL;
fw_status->count = fw_src->count;
for (i = 0; i < fw_src->count && i < MEI_FW_STATUS_MAX; i++) {
ret = pci_read_config_dword(pdev, fw_src->status[i],
&fw_status->status[i]);
trace_mei_pci_cfg_read(dev->dev, "PCI_CFG_HSF_X",
fw_src->status[i],
fw_status->status[i]);
if (ret)
return ret;
}
return 0;
}
/**
* mei_me_hw_config - configure hw dependent settings
*
* @dev: mei device
*/
static void mei_me_hw_config(struct mei_device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev->dev);
struct mei_me_hw *hw = to_me_hw(dev);
u32 hcsr, reg;
/* Doesn't change in runtime */
hcsr = mei_hcsr_read(dev);
dev->hbuf_depth = (hcsr & H_CBD) >> 24;
reg = 0;
pci_read_config_dword(pdev, PCI_CFG_HFS_1, &reg);
trace_mei_pci_cfg_read(dev->dev, "PCI_CFG_HFS_1", PCI_CFG_HFS_1, reg);
hw->d0i3_supported =
((reg & PCI_CFG_HFS_1_D0I3_MSK) == PCI_CFG_HFS_1_D0I3_MSK);
hw->pg_state = MEI_PG_OFF;
if (hw->d0i3_supported) {
reg = mei_me_d0i3c_read(dev);
if (reg & H_D0I3C_I3)
hw->pg_state = MEI_PG_ON;
}
}
/**
* mei_me_pg_state - translate internal pg state
* to the mei power gating state
*
* @dev: mei device
*
* Return: MEI_PG_OFF if aliveness is on and MEI_PG_ON otherwise
*/
static inline enum mei_pg_state mei_me_pg_state(struct mei_device *dev)
{
struct mei_me_hw *hw = to_me_hw(dev);
return hw->pg_state;
}
static inline u32 me_intr_src(u32 hcsr)
{
return hcsr & H_CSR_IS_MASK;
}
/**
* me_intr_disable - disables mei device interrupts
* using supplied hcsr register value.
*
* @dev: the device structure
* @hcsr: supplied hcsr register value
*/
static inline void me_intr_disable(struct mei_device *dev, u32 hcsr)
{
hcsr &= ~H_CSR_IE_MASK;
mei_hcsr_set(dev, hcsr);
}
/**
* mei_me_intr_clear - clear and stop interrupts
*
* @dev: the device structure
* @hcsr: supplied hcsr register value
*/
static inline void me_intr_clear(struct mei_device *dev, u32 hcsr)
{
if (me_intr_src(hcsr))
mei_hcsr_write(dev, hcsr);
}
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
/**
* mei_me_intr_clear - clear and stop interrupts
*
* @dev: the device structure
*/
static void mei_me_intr_clear(struct mei_device *dev)
{
u32 hcsr = mei_hcsr_read(dev);
me_intr_clear(dev, hcsr);
}
/**
* mei_me_intr_enable - enables mei device interrupts
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
*
* @dev: the device structure
*/
static void mei_me_intr_enable(struct mei_device *dev)
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
{
u32 hcsr = mei_hcsr_read(dev);
hcsr |= H_CSR_IE_MASK;
mei_hcsr_set(dev, hcsr);
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
}
/**
* mei_me_intr_disable - disables mei device interrupts
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
*
* @dev: the device structure
*/
static void mei_me_intr_disable(struct mei_device *dev)
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
{
u32 hcsr = mei_hcsr_read(dev);
me_intr_disable(dev, hcsr);
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
}
/**
* mei_me_synchronize_irq - wait for pending IRQ handlers
*
* @dev: the device structure
*/
static void mei_me_synchronize_irq(struct mei_device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev->dev);
synchronize_irq(pdev->irq);
}
/**
* mei_me_hw_reset_release - release device from the reset
*
* @dev: the device structure
*/
static void mei_me_hw_reset_release(struct mei_device *dev)
{
u32 hcsr = mei_hcsr_read(dev);
hcsr |= H_IG;
hcsr &= ~H_RST;
mei_hcsr_set(dev, hcsr);
/* complete this write before we set host ready on another CPU */
mmiowb();
}
/**
* mei_me_host_set_ready - enable device
*
* @dev: mei device
*/
static void mei_me_host_set_ready(struct mei_device *dev)
{
u32 hcsr = mei_hcsr_read(dev);
hcsr |= H_CSR_IE_MASK | H_IG | H_RDY;
mei_hcsr_set(dev, hcsr);
}
/**
* mei_me_host_is_ready - check whether the host has turned ready
*
* @dev: mei device
* Return: bool
*/
static bool mei_me_host_is_ready(struct mei_device *dev)
{
u32 hcsr = mei_hcsr_read(dev);
return (hcsr & H_RDY) == H_RDY;
}
/**
* mei_me_hw_is_ready - check whether the me(hw) has turned ready
*
* @dev: mei device
* Return: bool
*/
static bool mei_me_hw_is_ready(struct mei_device *dev)
{
u32 mecsr = mei_me_mecsr_read(dev);
return (mecsr & ME_RDY_HRA) == ME_RDY_HRA;
}
/**
* mei_me_hw_is_resetting - check whether the me(hw) is in reset
*
* @dev: mei device
* Return: bool
*/
static bool mei_me_hw_is_resetting(struct mei_device *dev)
{
u32 mecsr = mei_me_mecsr_read(dev);
return (mecsr & ME_RST_HRA) == ME_RST_HRA;
}
/**
* mei_me_hw_ready_wait - wait until the me(hw) has turned ready
* or timeout is reached
*
* @dev: mei device
* Return: 0 on success, error otherwise
*/
static int mei_me_hw_ready_wait(struct mei_device *dev)
{
mutex_unlock(&dev->device_lock);
wait_event_timeout(dev->wait_hw_ready,
dev->recvd_hw_ready,
mei_secs_to_jiffies(MEI_HW_READY_TIMEOUT));
mutex_lock(&dev->device_lock);
if (!dev->recvd_hw_ready) {
dev_err(dev->dev, "wait hw ready failed\n");
return -ETIME;
}
mei_me_hw_reset_release(dev);
dev->recvd_hw_ready = false;
return 0;
}
/**
* mei_me_hw_start - hw start routine
*
* @dev: mei device
* Return: 0 on success, error otherwise
*/
static int mei_me_hw_start(struct mei_device *dev)
{
int ret = mei_me_hw_ready_wait(dev);
if (ret)
return ret;
dev_dbg(dev->dev, "hw is ready\n");
mei_me_host_set_ready(dev);
return ret;
}
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
/**
* mei_hbuf_filled_slots - gets number of device filled buffer slots
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
*
* @dev: the device structure
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
*
* Return: number of filled slots
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
*/
static unsigned char mei_hbuf_filled_slots(struct mei_device *dev)
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
{
u32 hcsr;
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
char read_ptr, write_ptr;
hcsr = mei_hcsr_read(dev);
read_ptr = (char) ((hcsr & H_CBRP) >> 8);
write_ptr = (char) ((hcsr & H_CBWP) >> 16);
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
return (unsigned char) (write_ptr - read_ptr);
}
/**
* mei_me_hbuf_is_empty - checks if host buffer is empty.
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
*
* @dev: the device structure
*
* Return: true if empty, false - otherwise.
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
*/
static bool mei_me_hbuf_is_empty(struct mei_device *dev)
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
{
return mei_hbuf_filled_slots(dev) == 0;
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
}
/**
* mei_me_hbuf_empty_slots - counts write empty slots.
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
*
* @dev: the device structure
*
* Return: -EOVERFLOW if overflow, otherwise empty slots count
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
*/
static int mei_me_hbuf_empty_slots(struct mei_device *dev)
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
{
unsigned char filled_slots, empty_slots;
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
filled_slots = mei_hbuf_filled_slots(dev);
empty_slots = dev->hbuf_depth - filled_slots;
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
/* check for overflow */
if (filled_slots > dev->hbuf_depth)
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
return -EOVERFLOW;
return empty_slots;
}
/**
* mei_me_hbuf_max_len - returns size of hw buffer.
*
* @dev: the device structure
*
* Return: size of hw buffer in bytes
*/
static size_t mei_me_hbuf_max_len(const struct mei_device *dev)
{
return dev->hbuf_depth * sizeof(u32) - sizeof(struct mei_msg_hdr);
}
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
/**
* mei_me_hbuf_write - writes a message to host hw buffer.
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
*
* @dev: the device structure
* @header: mei HECI header of message
* @buf: message payload will be written
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
*
* Return: -EIO if write has failed
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
*/
static int mei_me_hbuf_write(struct mei_device *dev,
struct mei_msg_hdr *header,
const unsigned char *buf)
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
{
unsigned long rem;
unsigned long length = header->length;
u32 *reg_buf = (u32 *)buf;
u32 dw_cnt;
int i;
int empty_slots;
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
dev_dbg(dev->dev, MEI_HDR_FMT, MEI_HDR_PRM(header));
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
empty_slots = mei_hbuf_empty_slots(dev);
dev_dbg(dev->dev, "empty slots = %hu.\n", empty_slots);
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
dw_cnt = mei_data2slots(length);
if (empty_slots < 0 || dw_cnt > empty_slots)
return -EMSGSIZE;
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
mei_me_hcbww_write(dev, *((u32 *) header));
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
for (i = 0; i < length / 4; i++)
mei_me_hcbww_write(dev, reg_buf[i]);
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
rem = length & 0x3;
if (rem > 0) {
u32 reg = 0;
memcpy(&reg, &buf[length - rem], rem);
mei_me_hcbww_write(dev, reg);
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
}
mei_hcsr_set_hig(dev);
if (!mei_me_hw_is_ready(dev))
return -EIO;
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
return 0;
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
}
/**
* mei_me_count_full_read_slots - counts read full slots.
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
*
* @dev: the device structure
*
* Return: -EOVERFLOW if overflow, otherwise filled slots count
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
*/
static int mei_me_count_full_read_slots(struct mei_device *dev)
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
{
u32 me_csr;
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
char read_ptr, write_ptr;
unsigned char buffer_depth, filled_slots;
me_csr = mei_me_mecsr_read(dev);
buffer_depth = (unsigned char)((me_csr & ME_CBD_HRA) >> 24);
read_ptr = (char) ((me_csr & ME_CBRP_HRA) >> 8);
write_ptr = (char) ((me_csr & ME_CBWP_HRA) >> 16);
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
filled_slots = (unsigned char) (write_ptr - read_ptr);
/* check for overflow */
if (filled_slots > buffer_depth)
return -EOVERFLOW;
dev_dbg(dev->dev, "filled_slots =%08x\n", filled_slots);
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
return (int)filled_slots;
}
/**
* mei_me_read_slots - reads a message from mei device.
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
*
* @dev: the device structure
* @buffer: message buffer will be written
* @buffer_length: message size will be read
*
* Return: always 0
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
*/
static int mei_me_read_slots(struct mei_device *dev, unsigned char *buffer,
unsigned long buffer_length)
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
{
u32 *reg_buf = (u32 *)buffer;
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
for (; buffer_length >= sizeof(u32); buffer_length -= sizeof(u32))
*reg_buf++ = mei_me_mecbrw_read(dev);
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
if (buffer_length > 0) {
u32 reg = mei_me_mecbrw_read(dev);
memcpy(reg_buf, &reg, buffer_length);
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
}
mei_hcsr_set_hig(dev);
return 0;
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 04:43:43 -06:00
}
/**
* mei_me_pg_set - write pg enter register
*
* @dev: the device structure
*/
static void mei_me_pg_set(struct mei_device *dev)
{
struct mei_me_hw *hw = to_me_hw(dev);
u32 reg;
reg = mei_me_reg_read(hw, H_HPG_CSR);
trace_mei_reg_read(dev->dev, "H_HPG_CSR", H_HPG_CSR, reg);
reg |= H_HPG_CSR_PGI;
trace_mei_reg_write(dev->dev, "H_HPG_CSR", H_HPG_CSR, reg);
mei_me_reg_write(hw, H_HPG_CSR, reg);
}
/**
* mei_me_pg_unset - write pg exit register
*
* @dev: the device structure
*/
static void mei_me_pg_unset(struct mei_device *dev)
{
struct mei_me_hw *hw = to_me_hw(dev);
u32 reg;
reg = mei_me_reg_read(hw, H_HPG_CSR);
trace_mei_reg_read(dev->dev, "H_HPG_CSR", H_HPG_CSR, reg);
WARN(!(reg & H_HPG_CSR_PGI), "PGI is not set\n");
reg |= H_HPG_CSR_PGIHEXR;
trace_mei_reg_write(dev->dev, "H_HPG_CSR", H_HPG_CSR, reg);
mei_me_reg_write(hw, H_HPG_CSR, reg);
}
/**
* mei_me_pg_legacy_enter_sync - perform legacy pg entry procedure
*
* @dev: the device structure
*
* Return: 0 on success an error code otherwise
*/
static int mei_me_pg_legacy_enter_sync(struct mei_device *dev)
{
struct mei_me_hw *hw = to_me_hw(dev);
unsigned long timeout = mei_secs_to_jiffies(MEI_PGI_TIMEOUT);
int ret;
dev->pg_event = MEI_PG_EVENT_WAIT;
ret = mei_hbm_pg(dev, MEI_PG_ISOLATION_ENTRY_REQ_CMD);
if (ret)
return ret;
mutex_unlock(&dev->device_lock);
wait_event_timeout(dev->wait_pg,
dev->pg_event == MEI_PG_EVENT_RECEIVED, timeout);
mutex_lock(&dev->device_lock);
if (dev->pg_event == MEI_PG_EVENT_RECEIVED) {
mei_me_pg_set(dev);
ret = 0;
} else {
ret = -ETIME;
}
dev->pg_event = MEI_PG_EVENT_IDLE;
hw->pg_state = MEI_PG_ON;
return ret;
}
/**
* mei_me_pg_legacy_exit_sync - perform legacy pg exit procedure
*
* @dev: the device structure
*
* Return: 0 on success an error code otherwise
*/
static int mei_me_pg_legacy_exit_sync(struct mei_device *dev)
{
struct mei_me_hw *hw = to_me_hw(dev);
unsigned long timeout = mei_secs_to_jiffies(MEI_PGI_TIMEOUT);
int ret;
if (dev->pg_event == MEI_PG_EVENT_RECEIVED)
goto reply;
dev->pg_event = MEI_PG_EVENT_WAIT;
mei_me_pg_unset(dev);
mutex_unlock(&dev->device_lock);
wait_event_timeout(dev->wait_pg,
dev->pg_event == MEI_PG_EVENT_RECEIVED, timeout);
mutex_lock(&dev->device_lock);
reply:
if (dev->pg_event != MEI_PG_EVENT_RECEIVED) {
ret = -ETIME;
goto out;
}
dev->pg_event = MEI_PG_EVENT_INTR_WAIT;
ret = mei_hbm_pg(dev, MEI_PG_ISOLATION_EXIT_RES_CMD);
if (ret)
return ret;
mutex_unlock(&dev->device_lock);
wait_event_timeout(dev->wait_pg,
dev->pg_event == MEI_PG_EVENT_INTR_RECEIVED, timeout);
mutex_lock(&dev->device_lock);
if (dev->pg_event == MEI_PG_EVENT_INTR_RECEIVED)
ret = 0;
else
ret = -ETIME;
out:
dev->pg_event = MEI_PG_EVENT_IDLE;
hw->pg_state = MEI_PG_OFF;
return ret;
}
/**
* mei_me_pg_in_transition - is device now in pg transition
*
* @dev: the device structure
*
* Return: true if in pg transition, false otherwise
*/
static bool mei_me_pg_in_transition(struct mei_device *dev)
{
return dev->pg_event >= MEI_PG_EVENT_WAIT &&
dev->pg_event <= MEI_PG_EVENT_INTR_WAIT;
}
/**
* mei_me_pg_is_enabled - detect if PG is supported by HW
*
* @dev: the device structure
*
* Return: true is pg supported, false otherwise
*/
static bool mei_me_pg_is_enabled(struct mei_device *dev)
{
struct mei_me_hw *hw = to_me_hw(dev);
u32 reg = mei_me_mecsr_read(dev);
if (hw->d0i3_supported)
return true;
if ((reg & ME_PGIC_HRA) == 0)
goto notsupported;
if (!dev->hbm_f_pg_supported)
goto notsupported;
return true;
notsupported:
dev_dbg(dev->dev, "pg: not supported: d0i3 = %d HGP = %d hbm version %d.%d ?= %d.%d\n",
hw->d0i3_supported,
!!(reg & ME_PGIC_HRA),
dev->version.major_version,
dev->version.minor_version,
HBM_MAJOR_VERSION_PGI,
HBM_MINOR_VERSION_PGI);
return false;
}
/**
* mei_me_d0i3_set - write d0i3 register bit on mei device.
*
* @dev: the device structure
* @intr: ask for interrupt
*
* Return: D0I3C register value
*/
static u32 mei_me_d0i3_set(struct mei_device *dev, bool intr)
{
u32 reg = mei_me_d0i3c_read(dev);
reg |= H_D0I3C_I3;
if (intr)
reg |= H_D0I3C_IR;
else
reg &= ~H_D0I3C_IR;
mei_me_d0i3c_write(dev, reg);
/* read it to ensure HW consistency */
reg = mei_me_d0i3c_read(dev);
return reg;
}
/**
* mei_me_d0i3_unset - clean d0i3 register bit on mei device.
*
* @dev: the device structure
*
* Return: D0I3C register value
*/
static u32 mei_me_d0i3_unset(struct mei_device *dev)
{
u32 reg = mei_me_d0i3c_read(dev);
reg &= ~H_D0I3C_I3;
reg |= H_D0I3C_IR;
mei_me_d0i3c_write(dev, reg);
/* read it to ensure HW consistency */
reg = mei_me_d0i3c_read(dev);
return reg;
}
/**
* mei_me_d0i3_enter_sync - perform d0i3 entry procedure
*
* @dev: the device structure
*
* Return: 0 on success an error code otherwise
*/
static int mei_me_d0i3_enter_sync(struct mei_device *dev)
{
struct mei_me_hw *hw = to_me_hw(dev);
unsigned long d0i3_timeout = mei_secs_to_jiffies(MEI_D0I3_TIMEOUT);
unsigned long pgi_timeout = mei_secs_to_jiffies(MEI_PGI_TIMEOUT);
int ret;
u32 reg;
reg = mei_me_d0i3c_read(dev);
if (reg & H_D0I3C_I3) {
/* we are in d0i3, nothing to do */
dev_dbg(dev->dev, "d0i3 set not needed\n");
ret = 0;
goto on;
}
/* PGI entry procedure */
dev->pg_event = MEI_PG_EVENT_WAIT;
ret = mei_hbm_pg(dev, MEI_PG_ISOLATION_ENTRY_REQ_CMD);
if (ret)
/* FIXME: should we reset here? */
goto out;
mutex_unlock(&dev->device_lock);
wait_event_timeout(dev->wait_pg,
dev->pg_event == MEI_PG_EVENT_RECEIVED, pgi_timeout);
mutex_lock(&dev->device_lock);
if (dev->pg_event != MEI_PG_EVENT_RECEIVED) {
ret = -ETIME;
goto out;
}
/* end PGI entry procedure */
dev->pg_event = MEI_PG_EVENT_INTR_WAIT;
reg = mei_me_d0i3_set(dev, true);
if (!(reg & H_D0I3C_CIP)) {
dev_dbg(dev->dev, "d0i3 enter wait not needed\n");
ret = 0;
goto on;
}
mutex_unlock(&dev->device_lock);
wait_event_timeout(dev->wait_pg,
dev->pg_event == MEI_PG_EVENT_INTR_RECEIVED, d0i3_timeout);
mutex_lock(&dev->device_lock);
if (dev->pg_event != MEI_PG_EVENT_INTR_RECEIVED) {
reg = mei_me_d0i3c_read(dev);
if (!(reg & H_D0I3C_I3)) {
ret = -ETIME;
goto out;
}
}
ret = 0;
on:
hw->pg_state = MEI_PG_ON;
out:
dev->pg_event = MEI_PG_EVENT_IDLE;
dev_dbg(dev->dev, "d0i3 enter ret = %d\n", ret);
return ret;
}
/**
* mei_me_d0i3_enter - perform d0i3 entry procedure
* no hbm PG handshake
* no waiting for confirmation; runs with interrupts
* disabled
*
* @dev: the device structure
*
* Return: 0 on success an error code otherwise
*/
static int mei_me_d0i3_enter(struct mei_device *dev)
{
struct mei_me_hw *hw = to_me_hw(dev);
u32 reg;
reg = mei_me_d0i3c_read(dev);
if (reg & H_D0I3C_I3) {
/* we are in d0i3, nothing to do */
dev_dbg(dev->dev, "already d0i3 : set not needed\n");
goto on;
}
mei_me_d0i3_set(dev, false);
on:
hw->pg_state = MEI_PG_ON;
dev->pg_event = MEI_PG_EVENT_IDLE;
dev_dbg(dev->dev, "d0i3 enter\n");
return 0;
}
/**
* mei_me_d0i3_exit_sync - perform d0i3 exit procedure
*
* @dev: the device structure
*
* Return: 0 on success an error code otherwise
*/
static int mei_me_d0i3_exit_sync(struct mei_device *dev)
{
struct mei_me_hw *hw = to_me_hw(dev);
unsigned long timeout = mei_secs_to_jiffies(MEI_D0I3_TIMEOUT);
int ret;
u32 reg;
dev->pg_event = MEI_PG_EVENT_INTR_WAIT;
reg = mei_me_d0i3c_read(dev);
if (!(reg & H_D0I3C_I3)) {
/* we are not in d0i3, nothing to do */
dev_dbg(dev->dev, "d0i3 exit not needed\n");
ret = 0;
goto off;
}
reg = mei_me_d0i3_unset(dev);
if (!(reg & H_D0I3C_CIP)) {
dev_dbg(dev->dev, "d0i3 exit wait not needed\n");
ret = 0;
goto off;
}
mutex_unlock(&dev->device_lock);
wait_event_timeout(dev->wait_pg,
dev->pg_event == MEI_PG_EVENT_INTR_RECEIVED, timeout);
mutex_lock(&dev->device_lock);
if (dev->pg_event != MEI_PG_EVENT_INTR_RECEIVED) {
reg = mei_me_d0i3c_read(dev);
if (reg & H_D0I3C_I3) {
ret = -ETIME;
goto out;
}
}
ret = 0;
off:
hw->pg_state = MEI_PG_OFF;
out:
dev->pg_event = MEI_PG_EVENT_IDLE;
dev_dbg(dev->dev, "d0i3 exit ret = %d\n", ret);
return ret;
}
/**
* mei_me_pg_legacy_intr - perform legacy pg processing
* in interrupt thread handler
*
* @dev: the device structure
*/
static void mei_me_pg_legacy_intr(struct mei_device *dev)
{
struct mei_me_hw *hw = to_me_hw(dev);
if (dev->pg_event != MEI_PG_EVENT_INTR_WAIT)
return;
dev->pg_event = MEI_PG_EVENT_INTR_RECEIVED;
hw->pg_state = MEI_PG_OFF;
if (waitqueue_active(&dev->wait_pg))
wake_up(&dev->wait_pg);
}
/**
* mei_me_d0i3_intr - perform d0i3 processing in interrupt thread handler
*
* @dev: the device structure
* @intr_source: interrupt source
*/
static void mei_me_d0i3_intr(struct mei_device *dev, u32 intr_source)
{
struct mei_me_hw *hw = to_me_hw(dev);
if (dev->pg_event == MEI_PG_EVENT_INTR_WAIT &&
(intr_source & H_D0I3C_IS)) {
dev->pg_event = MEI_PG_EVENT_INTR_RECEIVED;
if (hw->pg_state == MEI_PG_ON) {
hw->pg_state = MEI_PG_OFF;
if (dev->hbm_state != MEI_HBM_IDLE) {
/*
* force H_RDY because it could be
* wiped off during PG
*/
dev_dbg(dev->dev, "d0i3 set host ready\n");
mei_me_host_set_ready(dev);
}
} else {
hw->pg_state = MEI_PG_ON;
}
wake_up(&dev->wait_pg);
}
if (hw->pg_state == MEI_PG_ON && (intr_source & H_IS)) {
/*
* HW sent some data and we are in D0i3, so
* we got here because of HW initiated exit from D0i3.
* Start runtime pm resume sequence to exit low power state.
*/
dev_dbg(dev->dev, "d0i3 want resume\n");
mei_hbm_pg_resume(dev);
}
}
/**
* mei_me_pg_intr - perform pg processing in interrupt thread handler
*
* @dev: the device structure
* @intr_source: interrupt source
*/
static void mei_me_pg_intr(struct mei_device *dev, u32 intr_source)
{
struct mei_me_hw *hw = to_me_hw(dev);
if (hw->d0i3_supported)
mei_me_d0i3_intr(dev, intr_source);
else
mei_me_pg_legacy_intr(dev);
}
/**
* mei_me_pg_enter_sync - perform runtime pm entry procedure
*
* @dev: the device structure
*
* Return: 0 on success an error code otherwise
*/
int mei_me_pg_enter_sync(struct mei_device *dev)
{
struct mei_me_hw *hw = to_me_hw(dev);
if (hw->d0i3_supported)
return mei_me_d0i3_enter_sync(dev);
else
return mei_me_pg_legacy_enter_sync(dev);
}
/**
* mei_me_pg_exit_sync - perform runtime pm exit procedure
*
* @dev: the device structure
*
* Return: 0 on success an error code otherwise
*/
int mei_me_pg_exit_sync(struct mei_device *dev)
{
struct mei_me_hw *hw = to_me_hw(dev);
if (hw->d0i3_supported)
return mei_me_d0i3_exit_sync(dev);
else
return mei_me_pg_legacy_exit_sync(dev);
}
/**
* mei_me_hw_reset - resets fw via mei csr register.
*
* @dev: the device structure
* @intr_enable: if interrupt should be enabled after reset.
*
* Return: 0 on success an error code otherwise
*/
static int mei_me_hw_reset(struct mei_device *dev, bool intr_enable)
{
struct mei_me_hw *hw = to_me_hw(dev);
int ret;
u32 hcsr;
if (intr_enable) {
mei_me_intr_enable(dev);
if (hw->d0i3_supported) {
ret = mei_me_d0i3_exit_sync(dev);
if (ret)
return ret;
}
}
pm_runtime_set_active(dev->dev);
hcsr = mei_hcsr_read(dev);
/* H_RST may be found lit before reset is started,
* for example if preceding reset flow hasn't completed.
* In that case asserting H_RST will be ignored, therefore
* we need to clean H_RST bit to start a successful reset sequence.
*/
if ((hcsr & H_RST) == H_RST) {
dev_warn(dev->dev, "H_RST is set = 0x%08X", hcsr);
hcsr &= ~H_RST;
mei_hcsr_set(dev, hcsr);
hcsr = mei_hcsr_read(dev);
}
hcsr |= H_RST | H_IG | H_CSR_IS_MASK;
if (!intr_enable)
hcsr &= ~H_CSR_IE_MASK;
dev->recvd_hw_ready = false;
mei_hcsr_write(dev, hcsr);
/*
* Host reads the H_CSR once to ensure that the
* posted write to H_CSR completes.
*/
hcsr = mei_hcsr_read(dev);
if ((hcsr & H_RST) == 0)
dev_warn(dev->dev, "H_RST is not set = 0x%08X", hcsr);
if ((hcsr & H_RDY) == H_RDY)
dev_warn(dev->dev, "H_RDY is not cleared 0x%08X", hcsr);
if (!intr_enable) {
mei_me_hw_reset_release(dev);
if (hw->d0i3_supported) {
ret = mei_me_d0i3_enter(dev);
if (ret)
return ret;
}
}
return 0;
}
/**
* mei_me_irq_quick_handler - The ISR of the MEI device
*
* @irq: The irq number
* @dev_id: pointer to the device structure
*
* Return: irqreturn_t
*/
irqreturn_t mei_me_irq_quick_handler(int irq, void *dev_id)
{
struct mei_device *dev = (struct mei_device *)dev_id;
u32 hcsr;
hcsr = mei_hcsr_read(dev);
if (!me_intr_src(hcsr))
return IRQ_NONE;
dev_dbg(dev->dev, "interrupt source 0x%08X\n", me_intr_src(hcsr));
/* disable interrupts on device */
me_intr_disable(dev, hcsr);
return IRQ_WAKE_THREAD;
}
/**
* mei_me_irq_thread_handler - function called after ISR to handle the interrupt
* processing.
*
* @irq: The irq number
* @dev_id: pointer to the device structure
*
* Return: irqreturn_t
*
*/
irqreturn_t mei_me_irq_thread_handler(int irq, void *dev_id)
{
struct mei_device *dev = (struct mei_device *) dev_id;
struct list_head cmpl_list;
s32 slots;
u32 hcsr;
int rets = 0;
dev_dbg(dev->dev, "function called after ISR to handle the interrupt processing.\n");
/* initialize our complete list */
mutex_lock(&dev->device_lock);
hcsr = mei_hcsr_read(dev);
me_intr_clear(dev, hcsr);
INIT_LIST_HEAD(&cmpl_list);
/* check if ME wants a reset */
if (!mei_hw_is_ready(dev) && dev->dev_state != MEI_DEV_RESETTING) {
dev_warn(dev->dev, "FW not ready: resetting.\n");
schedule_work(&dev->reset_work);
goto end;
}
if (mei_me_hw_is_resetting(dev))
mei_hcsr_set_hig(dev);
mei_me_pg_intr(dev, me_intr_src(hcsr));
/* check if we need to start the dev */
if (!mei_host_is_ready(dev)) {
if (mei_hw_is_ready(dev)) {
dev_dbg(dev->dev, "we need to start the dev.\n");
dev->recvd_hw_ready = true;
wake_up(&dev->wait_hw_ready);
} else {
dev_dbg(dev->dev, "Spurious Interrupt\n");
}
goto end;
}
/* check slots available for reading */
slots = mei_count_full_read_slots(dev);
while (slots > 0) {
dev_dbg(dev->dev, "slots to read = %08x\n", slots);
rets = mei_irq_read_handler(dev, &cmpl_list, &slots);
/* There is a race between ME write and interrupt delivery:
* Not all data is always available immediately after the
* interrupt, so try to read again on the next interrupt.
*/
if (rets == -ENODATA)
break;
if (rets && dev->dev_state != MEI_DEV_RESETTING) {
dev_err(dev->dev, "mei_irq_read_handler ret = %d.\n",
rets);
schedule_work(&dev->reset_work);
goto end;
}
}
dev->hbuf_is_ready = mei_hbuf_is_ready(dev);
/*
* During PG handshake only allowed write is the replay to the
* PG exit message, so block calling write function
* if the pg event is in PG handshake
*/
if (dev->pg_event != MEI_PG_EVENT_WAIT &&
dev->pg_event != MEI_PG_EVENT_RECEIVED) {
rets = mei_irq_write_handler(dev, &cmpl_list);
dev->hbuf_is_ready = mei_hbuf_is_ready(dev);
}
mei_irq_compl_handler(dev, &cmpl_list);
end:
dev_dbg(dev->dev, "interrupt thread end ret = %d\n", rets);
mei_me_intr_enable(dev);
mutex_unlock(&dev->device_lock);
return IRQ_HANDLED;
}
static const struct mei_hw_ops mei_me_hw_ops = {
.fw_status = mei_me_fw_status,
.pg_state = mei_me_pg_state,
.host_is_ready = mei_me_host_is_ready,
.hw_is_ready = mei_me_hw_is_ready,
.hw_reset = mei_me_hw_reset,
.hw_config = mei_me_hw_config,
.hw_start = mei_me_hw_start,
.pg_in_transition = mei_me_pg_in_transition,
.pg_is_enabled = mei_me_pg_is_enabled,
.intr_clear = mei_me_intr_clear,
.intr_enable = mei_me_intr_enable,
.intr_disable = mei_me_intr_disable,
.synchronize_irq = mei_me_synchronize_irq,
.hbuf_free_slots = mei_me_hbuf_empty_slots,
.hbuf_is_ready = mei_me_hbuf_is_empty,
.hbuf_max_len = mei_me_hbuf_max_len,
.write = mei_me_hbuf_write,
.rdbuf_full_slots = mei_me_count_full_read_slots,
.read_hdr = mei_me_mecbrw_read,
.read = mei_me_read_slots
};
static bool mei_me_fw_type_nm(struct pci_dev *pdev)
{
u32 reg;
pci_read_config_dword(pdev, PCI_CFG_HFS_2, &reg);
trace_mei_pci_cfg_read(&pdev->dev, "PCI_CFG_HFS_2", PCI_CFG_HFS_2, reg);
/* make sure that bit 9 (NM) is up and bit 10 (DM) is down */
return (reg & 0x600) == 0x200;
}
#define MEI_CFG_FW_NM \
.quirk_probe = mei_me_fw_type_nm
static bool mei_me_fw_type_sps(struct pci_dev *pdev)
{
u32 reg;
unsigned int devfn;
/*
* Read ME FW Status register to check for SPS Firmware
* The SPS FW is only signaled in pci function 0
*/
devfn = PCI_DEVFN(PCI_SLOT(pdev->devfn), 0);
pci_bus_read_config_dword(pdev->bus, devfn, PCI_CFG_HFS_1, &reg);
trace_mei_pci_cfg_read(&pdev->dev, "PCI_CFG_HFS_1", PCI_CFG_HFS_1, reg);
/* if bits [19:16] = 15, running SPS Firmware */
return (reg & 0xf0000) == 0xf0000;
}
#define MEI_CFG_FW_SPS \
.quirk_probe = mei_me_fw_type_sps
#define MEI_CFG_LEGACY_HFS \
.fw_status.count = 0
#define MEI_CFG_ICH_HFS \
.fw_status.count = 1, \
.fw_status.status[0] = PCI_CFG_HFS_1
#define MEI_CFG_PCH_HFS \
.fw_status.count = 2, \
.fw_status.status[0] = PCI_CFG_HFS_1, \
.fw_status.status[1] = PCI_CFG_HFS_2
#define MEI_CFG_PCH8_HFS \
.fw_status.count = 6, \
.fw_status.status[0] = PCI_CFG_HFS_1, \
.fw_status.status[1] = PCI_CFG_HFS_2, \
.fw_status.status[2] = PCI_CFG_HFS_3, \
.fw_status.status[3] = PCI_CFG_HFS_4, \
.fw_status.status[4] = PCI_CFG_HFS_5, \
.fw_status.status[5] = PCI_CFG_HFS_6
/* ICH Legacy devices */
const struct mei_cfg mei_me_legacy_cfg = {
MEI_CFG_LEGACY_HFS,
};
/* ICH devices */
const struct mei_cfg mei_me_ich_cfg = {
MEI_CFG_ICH_HFS,
};
/* PCH devices */
const struct mei_cfg mei_me_pch_cfg = {
MEI_CFG_PCH_HFS,
};
/* PCH Cougar Point and Patsburg with quirk for Node Manager exclusion */
const struct mei_cfg mei_me_pch_cpt_pbg_cfg = {
MEI_CFG_PCH_HFS,
MEI_CFG_FW_NM,
};
/* PCH8 Lynx Point and newer devices */
const struct mei_cfg mei_me_pch8_cfg = {
MEI_CFG_PCH8_HFS,
};
/* PCH8 Lynx Point with quirk for SPS Firmware exclusion */
const struct mei_cfg mei_me_pch8_sps_cfg = {
MEI_CFG_PCH8_HFS,
MEI_CFG_FW_SPS,
};
/**
* mei_me_dev_init - allocates and initializes the mei device structure
*
* @pdev: The pci device structure
* @cfg: per device generation config
*
* Return: The mei_device pointer on success, NULL on failure.
*/
struct mei_device *mei_me_dev_init(struct pci_dev *pdev,
const struct mei_cfg *cfg)
{
struct mei_device *dev;
struct mei_me_hw *hw;
dev = devm_kzalloc(&pdev->dev, sizeof(struct mei_device) +
sizeof(struct mei_me_hw), GFP_KERNEL);
if (!dev)
return NULL;
hw = to_me_hw(dev);
mei_device_init(dev, &pdev->dev, &mei_me_hw_ops);
hw->cfg = cfg;
return dev;
}