redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity
alistair23-linux/fs/overlayfs/dir.c

1096 lines
24 KiB
C
Raw Normal View History

overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
/*
*
* Copyright (C) 2011 Novell Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#include <linux/fs.h>
#include <linux/namei.h>
#include <linux/xattr.h>
#include <linux/security.h>
#include <linux/cred.h>
ovl: allow setting max size of redirect Add a module option to allow tuning the max size of absolute redirects. Default is 256. Size of relative redirects is naturally limited by the the underlying filesystem's max filename length (usually 255). Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 03:02:57 -07:00
#include <linux/module.h>
ovl: handle umask and posix_acl_default correctly on creation Setting MS_POSIXACL in sb->s_flags has the side effect of passing mode to create functions without masking against umask. Another problem when creating over a whiteout is that the default posix acl is not inherited from the parent dir (because the real parent dir at the time of creation is the work directory). Fix these problems by: a) If upper fs does not have MS_POSIXACL, then mask mode with umask. b) If creating over a whiteout, call posix_acl_create() to get the inherited acls. After creation (but before moving to the final destination) set these acls on the created file. posix_acl_create() also updates the file creation mode as appropriate. Fixes: 39a25b2b3762 ("ovl: define ->get_acl() for overlay inodes") Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-09-01 03:11:59 -06:00
#include <linux/posix_acl.h>
#include <linux/posix_acl_xattr.h>
ovl: Fix info leak in ovl_lookup_temp() The function uses the memory address of a struct dentry as unique id. While the address-based directory entry is only visible to root it is IMHO still worth fixing since the temporary name does not have to be a kernel address. It can be any unique number. Replace it by an atomic integer which is allowed to wrap around. Signed-off-by: Richard Weinberger <richard@nod.at> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Cc: <stable@vger.kernel.org> # v3.18+ Fixes: e9be9d5e76e3 ("overlay filesystem")
2016-09-16 03:45:24 -06:00
#include <linux/atomic.h>
ovl: redirect on rename-dir Current code returns EXDEV when a directory would need to be copied up to move. We could copy up the directory tree in this case, but there's another, simpler solution: point to old lower directory from moved upper directory. This is achieved with a "trusted.overlay.redirect" xattr storing the path relative to the root of the overlay. After such attribute has been set, the directory can be moved without further actions required. This is a backward incompatible feature, old kernels won't be able to correctly mount an overlay containing redirected directories. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 03:02:56 -07:00
#include <linux/ratelimit.h>
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
#include "overlayfs.h"
ovl: allow setting max size of redirect Add a module option to allow tuning the max size of absolute redirects. Default is 256. Size of relative redirects is naturally limited by the the underlying filesystem's max filename length (usually 255). Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 03:02:57 -07:00
static unsigned short ovl_redirect_max = 256;
module_param_named(redirect_max, ovl_redirect_max, ushort, 0644);
MODULE_PARM_DESC(ovl_redirect_max,
"Maximum length of absolute redirect xattr value");
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
void ovl_cleanup(struct inode *wdir, struct dentry *wdentry)
{
int err;
dget(wdentry);
VFS: (Scripted) Convert S_ISLNK/DIR/REG(dentry->d_inode) to d_is_*(dentry) Convert the following where appropriate: (1) S_ISLNK(dentry->d_inode) to d_is_symlink(dentry). (2) S_ISREG(dentry->d_inode) to d_is_reg(dentry). (3) S_ISDIR(dentry->d_inode) to d_is_dir(dentry). This is actually more complicated than it appears as some calls should be converted to d_can_lookup() instead. The difference is whether the directory in question is a real dir with a ->lookup op or whether it's a fake dir with a ->d_automount op. In some circumstances, we can subsume checks for dentry->d_inode not being NULL into this, provided we the code isn't in a filesystem that expects d_inode to be NULL if the dirent really *is* negative (ie. if we're going to use d_inode() rather than d_backing_inode() to get the inode pointer). Note that the dentry type field may be set to something other than DCACHE_MISS_TYPE when d_inode is NULL in the case of unionmount, where the VFS manages the fall-through from a negative dentry to a lower layer. In such a case, the dentry type of the negative union dentry is set to the same as the type of the lower dentry. However, if you know d_inode is not NULL at the call site, then you can use the d_is_xxx() functions even in a filesystem. There is one further complication: a 0,0 chardev dentry may be labelled DCACHE_WHITEOUT_TYPE rather than DCACHE_SPECIAL_TYPE. Strictly, this was intended for special directory entry types that don't have attached inodes. The following perl+coccinelle script was used: use strict; my @callers; open($fd, 'git grep -l \'S_IS[A-Z].*->d_inode\' |') || die "Can't grep for S_ISDIR and co. callers"; @callers = <$fd>; close($fd); unless (@callers) { print "No matches\n"; exit(0); } my @cocci = ( '@@', 'expression E;', '@@', '', '- S_ISLNK(E->d_inode->i_mode)', '+ d_is_symlink(E)', '', '@@', 'expression E;', '@@', '', '- S_ISDIR(E->d_inode->i_mode)', '+ d_is_dir(E)', '', '@@', 'expression E;', '@@', '', '- S_ISREG(E->d_inode->i_mode)', '+ d_is_reg(E)' ); my $coccifile = "tmp.sp.cocci"; open($fd, ">$coccifile") || die $coccifile; print($fd "$_\n") || die $coccifile foreach (@cocci); close($fd); foreach my $file (@callers) { chomp $file; print "Processing ", $file, "\n"; system("spatch", "--sp-file", $coccifile, $file, "--in-place", "--no-show-diff") == 0 || die "spatch failed"; } [AV: overlayfs parts skipped] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-01-29 05:02:35 -07:00
if (d_is_dir(wdentry))
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
err = ovl_do_rmdir(wdir, wdentry);
else
err = ovl_do_unlink(wdir, wdentry);
dput(wdentry);
if (err) {
pr_err("overlayfs: cleanup of '%pd2' failed (%i)\n",
wdentry, err);
}
}
ovl: remove unused arg from ovl_lookup_temp() Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-05-19 01:33:49 -06:00
struct dentry *ovl_lookup_temp(struct dentry *workdir)
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
{
struct dentry *temp;
char name[20];
ovl: Fix info leak in ovl_lookup_temp() The function uses the memory address of a struct dentry as unique id. While the address-based directory entry is only visible to root it is IMHO still worth fixing since the temporary name does not have to be a kernel address. It can be any unique number. Replace it by an atomic integer which is allowed to wrap around. Signed-off-by: Richard Weinberger <richard@nod.at> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Cc: <stable@vger.kernel.org> # v3.18+ Fixes: e9be9d5e76e3 ("overlay filesystem")
2016-09-16 03:45:24 -06:00
static atomic_t temp_id = ATOMIC_INIT(0);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
ovl: Fix info leak in ovl_lookup_temp() The function uses the memory address of a struct dentry as unique id. While the address-based directory entry is only visible to root it is IMHO still worth fixing since the temporary name does not have to be a kernel address. It can be any unique number. Replace it by an atomic integer which is allowed to wrap around. Signed-off-by: Richard Weinberger <richard@nod.at> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Cc: <stable@vger.kernel.org> # v3.18+ Fixes: e9be9d5e76e3 ("overlay filesystem")
2016-09-16 03:45:24 -06:00
/* counter is allowed to wrap, since temp dentries are ephemeral */
snprintf(name, sizeof(name), "#%x", atomic_inc_return(&temp_id));
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
temp = lookup_one_len(name, workdir, strlen(name));
if (!IS_ERR(temp) && temp->d_inode) {
pr_err("overlayfs: workdir/%s already exists\n", name);
dput(temp);
temp = ERR_PTR(-EIO);
}
return temp;
}
/* caller holds i_mutex on workdir */
static struct dentry *ovl_whiteout(struct dentry *workdir,
struct dentry *dentry)
{
int err;
struct dentry *whiteout;
struct inode *wdir = workdir->d_inode;
ovl: remove unused arg from ovl_lookup_temp() Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-05-19 01:33:49 -06:00
whiteout = ovl_lookup_temp(workdir);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
if (IS_ERR(whiteout))
return whiteout;
err = ovl_do_whiteout(wdir, whiteout);
if (err) {
dput(whiteout);
whiteout = ERR_PTR(err);
}
return whiteout;
}
int ovl_create_real(struct inode *dir, struct dentry *newdentry,
ovl: clean up kstat usage FWIW, there's a bit of abuse of struct kstat in overlayfs object creation paths - for one thing, it ends up with a very small subset of struct kstat (mode + rdev), for another it also needs link in case of symlinks and ends up passing it separately. IMO it would be better to introduce a separate object for that. In principle, we might even lift that thing into general API and switch ->mkdir()/->mknod()/->symlink() to identical calling conventions. Hell knows, perhaps ->create() as well... Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-04 10:33:17 -07:00
struct cattr *attr, struct dentry *hardlink, bool debug)
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
{
int err;
if (newdentry->d_inode)
return -ESTALE;
if (hardlink) {
err = ovl_do_link(hardlink, dir, newdentry, debug);
} else {
ovl: clean up kstat usage FWIW, there's a bit of abuse of struct kstat in overlayfs object creation paths - for one thing, it ends up with a very small subset of struct kstat (mode + rdev), for another it also needs link in case of symlinks and ends up passing it separately. IMO it would be better to introduce a separate object for that. In principle, we might even lift that thing into general API and switch ->mkdir()/->mknod()/->symlink() to identical calling conventions. Hell knows, perhaps ->create() as well... Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-04 10:33:17 -07:00
switch (attr->mode & S_IFMT) {
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
case S_IFREG:
ovl: clean up kstat usage FWIW, there's a bit of abuse of struct kstat in overlayfs object creation paths - for one thing, it ends up with a very small subset of struct kstat (mode + rdev), for another it also needs link in case of symlinks and ends up passing it separately. IMO it would be better to introduce a separate object for that. In principle, we might even lift that thing into general API and switch ->mkdir()/->mknod()/->symlink() to identical calling conventions. Hell knows, perhaps ->create() as well... Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-04 10:33:17 -07:00
err = ovl_do_create(dir, newdentry, attr->mode, debug);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
break;
case S_IFDIR:
ovl: clean up kstat usage FWIW, there's a bit of abuse of struct kstat in overlayfs object creation paths - for one thing, it ends up with a very small subset of struct kstat (mode + rdev), for another it also needs link in case of symlinks and ends up passing it separately. IMO it would be better to introduce a separate object for that. In principle, we might even lift that thing into general API and switch ->mkdir()/->mknod()/->symlink() to identical calling conventions. Hell knows, perhaps ->create() as well... Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-04 10:33:17 -07:00
err = ovl_do_mkdir(dir, newdentry, attr->mode, debug);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
break;
case S_IFCHR:
case S_IFBLK:
case S_IFIFO:
case S_IFSOCK:
err = ovl_do_mknod(dir, newdentry,
ovl: clean up kstat usage FWIW, there's a bit of abuse of struct kstat in overlayfs object creation paths - for one thing, it ends up with a very small subset of struct kstat (mode + rdev), for another it also needs link in case of symlinks and ends up passing it separately. IMO it would be better to introduce a separate object for that. In principle, we might even lift that thing into general API and switch ->mkdir()/->mknod()/->symlink() to identical calling conventions. Hell knows, perhaps ->create() as well... Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-04 10:33:17 -07:00
attr->mode, attr->rdev, debug);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
break;
case S_IFLNK:
ovl: clean up kstat usage FWIW, there's a bit of abuse of struct kstat in overlayfs object creation paths - for one thing, it ends up with a very small subset of struct kstat (mode + rdev), for another it also needs link in case of symlinks and ends up passing it separately. IMO it would be better to introduce a separate object for that. In principle, we might even lift that thing into general API and switch ->mkdir()/->mknod()/->symlink() to identical calling conventions. Hell knows, perhaps ->create() as well... Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-04 10:33:17 -07:00
err = ovl_do_symlink(dir, newdentry, attr->link, debug);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
break;
default:
err = -EPERM;
}
}
if (!err && WARN_ON(!newdentry->d_inode)) {
/*
* Not quite sure if non-instantiated dentry is legal or not.
* VFS doesn't seem to care so check and warn here.
*/
err = -ENOENT;
}
return err;
}
ovl: handle rename when upper doesn't support xattr On failure to set opaque/redirect xattr on rename, skip setting xattr and return -EXDEV. On failure to set opaque xattr when creating a new directory, -EIO is returned instead of -EOPNOTSUPP. Any failure to set those xattr will be recorded in super block and then setting any xattr on upper won't be attempted again. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-05-16 15:12:41 -06:00
static int ovl_set_opaque_xerr(struct dentry *dentry, struct dentry *upper,
int xerr)
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
{
ovl: opaque cleanup oe->opaque is set for a) whiteouts b) directories having the "trusted.overlay.opaque" xattr Case b can be simplified, since setting the xattr always implies setting oe->opaque. Also once set, the opaque flag is never cleared. Don't need to set opaque flag for non-directories. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 03:02:57 -07:00
int err;
ovl: handle rename when upper doesn't support xattr On failure to set opaque/redirect xattr on rename, skip setting xattr and return -EXDEV. On failure to set opaque xattr when creating a new directory, -EIO is returned instead of -EOPNOTSUPP. Any failure to set those xattr will be recorded in super block and then setting any xattr on upper won't be attempted again. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-05-16 15:12:41 -06:00
err = ovl_check_setxattr(dentry, upper, OVL_XATTR_OPAQUE, "y", 1, xerr);
ovl: opaque cleanup oe->opaque is set for a) whiteouts b) directories having the "trusted.overlay.opaque" xattr Case b can be simplified, since setting the xattr always implies setting oe->opaque. Also once set, the opaque flag is never cleared. Don't need to set opaque flag for non-directories. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 03:02:57 -07:00
if (!err)
ovl_dentry_set_opaque(dentry);
return err;
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
}
ovl: handle rename when upper doesn't support xattr On failure to set opaque/redirect xattr on rename, skip setting xattr and return -EXDEV. On failure to set opaque xattr when creating a new directory, -EIO is returned instead of -EOPNOTSUPP. Any failure to set those xattr will be recorded in super block and then setting any xattr on upper won't be attempted again. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-05-16 15:12:41 -06:00
static int ovl_set_opaque(struct dentry *dentry, struct dentry *upperdentry)
{
/*
* Fail with -EIO when trying to create opaque dir and upper doesn't
* support xattrs. ovl_rename() calls ovl_set_opaque_xerr(-EXDEV) to
* return a specific error for noxattr case.
*/
return ovl_set_opaque_xerr(dentry, upperdentry, -EIO);
}
ovl: move some common code in a function ovl_create_upper() and ovl_create_over_whiteout() seem to be sharing some common code which can be moved into a separate function. No functionality change. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-06-16 08:09:14 -06:00
/* Common operations required to be done after creation of file on upper */
static void ovl_instantiate(struct dentry *dentry, struct inode *inode,
ovl: share inode for hard link Inode attributes are copied up to overlay inode (uid, gid, mode, atime, mtime, ctime) so generic code using these fields works correcty. If a hard link is created in overlayfs separate inodes are allocated for each link. If chmod/chown/etc. is performed on one of the links then the inode belonging to the other ones won't be updated. This patch attempts to fix this by sharing inodes for hard links. Use inode hash (with real inode pointer as a key) to make sure overlay inodes are shared for hard links on upper. Hard links on lower are still split (which is not user observable until the copy-up happens, see Documentation/filesystems/overlayfs.txt under "Non-standard behavior"). The inode is only inserted in the hash if it is non-directoy and upper. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-29 04:05:24 -06:00
struct dentry *newdentry, bool hardlink)
ovl: move some common code in a function ovl_create_upper() and ovl_create_over_whiteout() seem to be sharing some common code which can be moved into a separate function. No functionality change. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-06-16 08:09:14 -06:00
{
ovl_dentry_version_inc(dentry->d_parent);
ovl: share inode for hard link Inode attributes are copied up to overlay inode (uid, gid, mode, atime, mtime, ctime) so generic code using these fields works correcty. If a hard link is created in overlayfs separate inodes are allocated for each link. If chmod/chown/etc. is performed on one of the links then the inode belonging to the other ones won't be updated. This patch attempts to fix this by sharing inodes for hard links. Use inode hash (with real inode pointer as a key) to make sure overlay inodes are shared for hard links on upper. Hard links on lower are still split (which is not user observable until the copy-up happens, see Documentation/filesystems/overlayfs.txt under "Non-standard behavior"). The inode is only inserted in the hash if it is non-directoy and upper. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-29 04:05:24 -06:00
if (!hardlink) {
ovl: move __upperdentry to ovl_inode Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-07-04 14:03:16 -06:00
ovl_inode_update(inode, newdentry);
ovl: share inode for hard link Inode attributes are copied up to overlay inode (uid, gid, mode, atime, mtime, ctime) so generic code using these fields works correcty. If a hard link is created in overlayfs separate inodes are allocated for each link. If chmod/chown/etc. is performed on one of the links then the inode belonging to the other ones won't be updated. This patch attempts to fix this by sharing inodes for hard links. Use inode hash (with real inode pointer as a key) to make sure overlay inodes are shared for hard links on upper. Hard links on lower are still split (which is not user observable until the copy-up happens, see Documentation/filesystems/overlayfs.txt under "Non-standard behavior"). The inode is only inserted in the hash if it is non-directoy and upper. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-29 04:05:24 -06:00
ovl_copyattr(newdentry->d_inode, inode);
} else {
ovl: move __upperdentry to ovl_inode Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-07-04 14:03:16 -06:00
WARN_ON(ovl_inode_real(inode) != d_inode(newdentry));
dput(newdentry);
ovl: share inode for hard link Inode attributes are copied up to overlay inode (uid, gid, mode, atime, mtime, ctime) so generic code using these fields works correcty. If a hard link is created in overlayfs separate inodes are allocated for each link. If chmod/chown/etc. is performed on one of the links then the inode belonging to the other ones won't be updated. This patch attempts to fix this by sharing inodes for hard links. Use inode hash (with real inode pointer as a key) to make sure overlay inodes are shared for hard links on upper. Hard links on lower are still split (which is not user observable until the copy-up happens, see Documentation/filesystems/overlayfs.txt under "Non-standard behavior"). The inode is only inserted in the hash if it is non-directoy and upper. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-29 04:05:24 -06:00
inc_nlink(inode);
}
ovl: move some common code in a function ovl_create_upper() and ovl_create_over_whiteout() seem to be sharing some common code which can be moved into a separate function. No functionality change. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-06-16 08:09:14 -06:00
d_instantiate(dentry, inode);
ovl: persistent inode numbers for upper hardlinks An upper type non directory dentry that is a copy up target should have a reference to its lower copy up origin. There are three ways for an upper type dentry to be instantiated: 1. A lower type dentry that is being copied up 2. An entry that is found in upper dir by ovl_lookup() 3. A negative dentry is hardlinked to an upper type dentry In the first case, the lower reference is set before copy up. In the second case, the lower reference is found by ovl_lookup(). In the last case of hardlinked upper dentry, it is not easy to update the lower reference of the negative dentry. Instead, drop the newly hardlinked negative dentry from dcache and let the next access call ovl_lookup() to find its lower reference. This makes sure that the inode number reported by stat(2) after the hardlink is created is the same inode number that will be reported by stat(2) after mount cycle, which is the inode number of the lower copy up origin of the hardlink source. NOTE that this does not fix breaking of lower hardlinks on copy up, but only fixes the case of lower nlink == 1, whose upper copy up inode is hardlinked in upper dir. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-04-24 10:54:13 -06:00
/* Force lookup of new upper hardlink to find its lower */
if (hardlink)
d_drop(dentry);
ovl: move some common code in a function ovl_create_upper() and ovl_create_over_whiteout() seem to be sharing some common code which can be moved into a separate function. No functionality change. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-06-16 08:09:14 -06:00
}
ovl: create directories inside merged parent opaque The benefit of making directories opaque on creation is that lookups can stop short when they reach the original created directory, instead of continue lookup the entire depth of parent directory stack. The best case is overlay with N layers, performing lookup for first level directory, which exists only in upper. In that case, there will be only one lookup instead of N. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-11-21 09:57:34 -07:00
static bool ovl_type_merge(struct dentry *dentry)
{
return OVL_TYPE_MERGE(ovl_path_type(dentry));
}
ovl: mark upper dir with type origin entries "impure" When moving a merge dir or non-dir with copy up origin into a non-merge upper dir (a.k.a pure upper dir), we are marking the target parent dir "impure". ovl_iterate() iterates pure upper dirs directly, because there is no need to filter out whiteouts and merge dir content with lower dir. But for the case of an "impure" upper dir, ovl_iterate() will not be able to iterate the real upper dir directly, because it will need to lookup the origin inode and use it to fill d_ino. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-05-11 07:42:26 -06:00
static bool ovl_type_origin(struct dentry *dentry)
{
return OVL_TYPE_ORIGIN(ovl_path_type(dentry));
}
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
static int ovl_create_upper(struct dentry *dentry, struct inode *inode,
ovl: clean up kstat usage FWIW, there's a bit of abuse of struct kstat in overlayfs object creation paths - for one thing, it ends up with a very small subset of struct kstat (mode + rdev), for another it also needs link in case of symlinks and ends up passing it separately. IMO it would be better to introduce a separate object for that. In principle, we might even lift that thing into general API and switch ->mkdir()/->mknod()/->symlink() to identical calling conventions. Hell knows, perhaps ->create() as well... Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-04 10:33:17 -07:00
struct cattr *attr, struct dentry *hardlink)
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
{
struct dentry *upperdir = ovl_dentry_upper(dentry->d_parent);
struct inode *udir = upperdir->d_inode;
struct dentry *newdentry;
int err;
ovl: handle umask and posix_acl_default correctly on creation Setting MS_POSIXACL in sb->s_flags has the side effect of passing mode to create functions without masking against umask. Another problem when creating over a whiteout is that the default posix acl is not inherited from the parent dir (because the real parent dir at the time of creation is the work directory). Fix these problems by: a) If upper fs does not have MS_POSIXACL, then mask mode with umask. b) If creating over a whiteout, call posix_acl_create() to get the inherited acls. After creation (but before moving to the final destination) set these acls on the created file. posix_acl_create() also updates the file creation mode as appropriate. Fixes: 39a25b2b3762 ("ovl: define ->get_acl() for overlay inodes") Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-09-01 03:11:59 -06:00
if (!hardlink && !IS_POSIXACL(udir))
ovl: clean up kstat usage FWIW, there's a bit of abuse of struct kstat in overlayfs object creation paths - for one thing, it ends up with a very small subset of struct kstat (mode + rdev), for another it also needs link in case of symlinks and ends up passing it separately. IMO it would be better to introduce a separate object for that. In principle, we might even lift that thing into general API and switch ->mkdir()/->mknod()/->symlink() to identical calling conventions. Hell knows, perhaps ->create() as well... Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-04 10:33:17 -07:00
attr->mode &= ~current_umask();
ovl: handle umask and posix_acl_default correctly on creation Setting MS_POSIXACL in sb->s_flags has the side effect of passing mode to create functions without masking against umask. Another problem when creating over a whiteout is that the default posix acl is not inherited from the parent dir (because the real parent dir at the time of creation is the work directory). Fix these problems by: a) If upper fs does not have MS_POSIXACL, then mask mode with umask. b) If creating over a whiteout, call posix_acl_create() to get the inherited acls. After creation (but before moving to the final destination) set these acls on the created file. posix_acl_create() also updates the file creation mode as appropriate. Fixes: 39a25b2b3762 ("ovl: define ->get_acl() for overlay inodes") Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-09-01 03:11:59 -06:00
wrappers for ->i_mutex access parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested}, inode_foo(inode) being mutex_foo(&inode->i_mutex). Please, use those for access to ->i_mutex; over the coming cycle ->i_mutex will become rwsem, with ->lookup() done with it held only shared. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-22 13:40:57 -07:00
inode_lock_nested(udir, I_MUTEX_PARENT);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
newdentry = lookup_one_len(dentry->d_name.name, upperdir,
dentry->d_name.len);
err = PTR_ERR(newdentry);
if (IS_ERR(newdentry))
goto out_unlock;
ovl: clean up kstat usage FWIW, there's a bit of abuse of struct kstat in overlayfs object creation paths - for one thing, it ends up with a very small subset of struct kstat (mode + rdev), for another it also needs link in case of symlinks and ends up passing it separately. IMO it would be better to introduce a separate object for that. In principle, we might even lift that thing into general API and switch ->mkdir()/->mknod()/->symlink() to identical calling conventions. Hell knows, perhaps ->create() as well... Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-04 10:33:17 -07:00
err = ovl_create_real(udir, newdentry, attr, hardlink, false);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
if (err)
goto out_dput;
ovl: do not set overlay.opaque on non-dir create The optimization for opaque dir create was wrongly being applied also to non-dir create. Fixes: 97c684cc9110 ("ovl: create directories inside merged parent opaque") Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Cc: <stable@vger.kernel.org> # v4.10
2017-04-24 13:26:40 -06:00
if (ovl_type_merge(dentry->d_parent) && d_is_dir(newdentry)) {
ovl: create directories inside merged parent opaque The benefit of making directories opaque on creation is that lookups can stop short when they reach the original created directory, instead of continue lookup the entire depth of parent directory stack. The best case is overlay with N layers, performing lookup for first level directory, which exists only in upper. In that case, there will be only one lookup instead of N. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-11-21 09:57:34 -07:00
/* Setting opaque here is just an optimization, allow to fail */
ovl_set_opaque(dentry, newdentry);
}
ovl: share inode for hard link Inode attributes are copied up to overlay inode (uid, gid, mode, atime, mtime, ctime) so generic code using these fields works correcty. If a hard link is created in overlayfs separate inodes are allocated for each link. If chmod/chown/etc. is performed on one of the links then the inode belonging to the other ones won't be updated. This patch attempts to fix this by sharing inodes for hard links. Use inode hash (with real inode pointer as a key) to make sure overlay inodes are shared for hard links on upper. Hard links on lower are still split (which is not user observable until the copy-up happens, see Documentation/filesystems/overlayfs.txt under "Non-standard behavior"). The inode is only inserted in the hash if it is non-directoy and upper. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-29 04:05:24 -06:00
ovl_instantiate(dentry, inode, newdentry, !!hardlink);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
newdentry = NULL;
out_dput:
dput(newdentry);
out_unlock:
wrappers for ->i_mutex access parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested}, inode_foo(inode) being mutex_foo(&inode->i_mutex). Please, use those for access to ->i_mutex; over the coming cycle ->i_mutex will become rwsem, with ->lookup() done with it held only shared. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-22 13:40:57 -07:00
inode_unlock(udir);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
return err;
}
static int ovl_lock_rename_workdir(struct dentry *workdir,
struct dentry *upperdir)
{
/* Workdir should not be the same as upperdir */
if (workdir == upperdir)
goto err;
/* Workdir should not be subdir of upperdir and vice versa */
if (lock_rename(workdir, upperdir) != NULL)
goto err_unlock;
return 0;
err_unlock:
unlock_rename(workdir, upperdir);
err:
pr_err("overlayfs: failed to lock workdir+upperdir\n");
return -EIO;
}
static struct dentry *ovl_clear_empty(struct dentry *dentry,
struct list_head *list)
{
struct dentry *workdir = ovl_workdir(dentry);
struct inode *wdir = workdir->d_inode;
struct dentry *upperdir = ovl_dentry_upper(dentry->d_parent);
struct inode *udir = upperdir->d_inode;
struct path upperpath;
struct dentry *upper;
struct dentry *opaquedir;
struct kstat stat;
int err;
ovl: mount read-only if workdir can't be created OpenWRT folks reported that overlayfs fails to mount if upper fs is full, because workdir can't be created. Wordir creation can fail for various other reasons too. There's no reason that the mount itself should fail, overlayfs can work fine without a workdir, as long as the overlay isn't modified. So mount it read-only and don't allow remounting read-write. Add a couple of WARN_ON()s for the impossible case of workdir being used despite being read-only. Reported-by: Bastian Bittorf <bittorf@bluebottle.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: <stable@vger.kernel.org> # v3.18+
2015-05-19 06:30:12 -06:00
if (WARN_ON(!workdir))
return ERR_PTR(-EROFS);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
err = ovl_lock_rename_workdir(workdir, upperdir);
if (err)
goto out;
ovl_path_upper(dentry, &upperpath);
statx: Add a system call to make enhanced file info available Add a system call to make extended file information available, including file creation and some attribute flags where available through the underlying filesystem. The getattr inode operation is altered to take two additional arguments: a u32 request_mask and an unsigned int flags that indicate the synchronisation mode. This change is propagated to the vfs_getattr*() function. Functions like vfs_stat() are now inline wrappers around new functions vfs_statx() and vfs_statx_fd() to reduce stack usage. ======== OVERVIEW ======== The idea was initially proposed as a set of xattrs that could be retrieved with getxattr(), but the general preference proved to be for a new syscall with an extended stat structure. A number of requests were gathered for features to be included. The following have been included: (1) Make the fields a consistent size on all arches and make them large. (2) Spare space, request flags and information flags are provided for future expansion. (3) Better support for the y2038 problem [Arnd Bergmann] (tv_sec is an __s64). (4) Creation time: The SMB protocol carries the creation time, which could be exported by Samba, which will in turn help CIFS make use of FS-Cache as that can be used for coherency data (stx_btime). This is also specified in NFSv4 as a recommended attribute and could be exported by NFSD [Steve French]. (5) Lightweight stat: Ask for just those details of interest, and allow a netfs (such as NFS) to approximate anything not of interest, possibly without going to the server [Trond Myklebust, Ulrich Drepper, Andreas Dilger] (AT_STATX_DONT_SYNC). (6) Heavyweight stat: Force a netfs to go to the server, even if it thinks its cached attributes are up to date [Trond Myklebust] (AT_STATX_FORCE_SYNC). And the following have been left out for future extension: (7) Data version number: Could be used by userspace NFS servers [Aneesh Kumar]. Can also be used to modify fill_post_wcc() in NFSD which retrieves i_version directly, but has just called vfs_getattr(). It could get it from the kstat struct if it used vfs_xgetattr() instead. (There's disagreement on the exact semantics of a single field, since not all filesystems do this the same way). (8) BSD stat compatibility: Including more fields from the BSD stat such as creation time (st_btime) and inode generation number (st_gen) [Jeremy Allison, Bernd Schubert]. (9) Inode generation number: Useful for FUSE and userspace NFS servers [Bernd Schubert]. (This was asked for but later deemed unnecessary with the open-by-handle capability available and caused disagreement as to whether it's a security hole or not). (10) Extra coherency data may be useful in making backups [Andreas Dilger]. (No particular data were offered, but things like last backup timestamp, the data version number and the DOS archive bit would come into this category). (11) Allow the filesystem to indicate what it can/cannot provide: A filesystem can now say it doesn't support a standard stat feature if that isn't available, so if, for instance, inode numbers or UIDs don't exist or are fabricated locally... (This requires a separate system call - I have an fsinfo() call idea for this). (12) Store a 16-byte volume ID in the superblock that can be returned in struct xstat [Steve French]. (Deferred to fsinfo). (13) Include granularity fields in the time data to indicate the granularity of each of the times (NFSv4 time_delta) [Steve French]. (Deferred to fsinfo). (14) FS_IOC_GETFLAGS value. These could be translated to BSD's st_flags. Note that the Linux IOC flags are a mess and filesystems such as Ext4 define flags that aren't in linux/fs.h, so translation in the kernel may be a necessity (or, possibly, we provide the filesystem type too). (Some attributes are made available in stx_attributes, but the general feeling was that the IOC flags were to ext[234]-specific and shouldn't be exposed through statx this way). (15) Mask of features available on file (eg: ACLs, seclabel) [Brad Boyer, Michael Kerrisk]. (Deferred, probably to fsinfo. Finding out if there's an ACL or seclabal might require extra filesystem operations). (16) Femtosecond-resolution timestamps [Dave Chinner]. (A __reserved field has been left in the statx_timestamp struct for this - if there proves to be a need). (17) A set multiple attributes syscall to go with this. =============== NEW SYSTEM CALL =============== The new system call is: int ret = statx(int dfd, const char *filename, unsigned int flags, unsigned int mask, struct statx *buffer); The dfd, filename and flags parameters indicate the file to query, in a similar way to fstatat(). There is no equivalent of lstat() as that can be emulated with statx() by passing AT_SYMLINK_NOFOLLOW in flags. There is also no equivalent of fstat() as that can be emulated by passing a NULL filename to statx() with the fd of interest in dfd. Whether or not statx() synchronises the attributes with the backing store can be controlled by OR'ing a value into the flags argument (this typically only affects network filesystems): (1) AT_STATX_SYNC_AS_STAT tells statx() to behave as stat() does in this respect. (2) AT_STATX_FORCE_SYNC will require a network filesystem to synchronise its attributes with the server - which might require data writeback to occur to get the timestamps correct. (3) AT_STATX_DONT_SYNC will suppress synchronisation with the server in a network filesystem. The resulting values should be considered approximate. mask is a bitmask indicating the fields in struct statx that are of interest to the caller. The user should set this to STATX_BASIC_STATS to get the basic set returned by stat(). It should be noted that asking for more information may entail extra I/O operations. buffer points to the destination for the data. This must be 256 bytes in size. ====================== MAIN ATTRIBUTES RECORD ====================== The following structures are defined in which to return the main attribute set: struct statx_timestamp { __s64 tv_sec; __s32 tv_nsec; __s32 __reserved; }; struct statx { __u32 stx_mask; __u32 stx_blksize; __u64 stx_attributes; __u32 stx_nlink; __u32 stx_uid; __u32 stx_gid; __u16 stx_mode; __u16 __spare0[1]; __u64 stx_ino; __u64 stx_size; __u64 stx_blocks; __u64 __spare1[1]; struct statx_timestamp stx_atime; struct statx_timestamp stx_btime; struct statx_timestamp stx_ctime; struct statx_timestamp stx_mtime; __u32 stx_rdev_major; __u32 stx_rdev_minor; __u32 stx_dev_major; __u32 stx_dev_minor; __u64 __spare2[14]; }; The defined bits in request_mask and stx_mask are: STATX_TYPE Want/got stx_mode & S_IFMT STATX_MODE Want/got stx_mode & ~S_IFMT STATX_NLINK Want/got stx_nlink STATX_UID Want/got stx_uid STATX_GID Want/got stx_gid STATX_ATIME Want/got stx_atime{,_ns} STATX_MTIME Want/got stx_mtime{,_ns} STATX_CTIME Want/got stx_ctime{,_ns} STATX_INO Want/got stx_ino STATX_SIZE Want/got stx_size STATX_BLOCKS Want/got stx_blocks STATX_BASIC_STATS [The stuff in the normal stat struct] STATX_BTIME Want/got stx_btime{,_ns} STATX_ALL [All currently available stuff] stx_btime is the file creation time, stx_mask is a bitmask indicating the data provided and __spares*[] are where as-yet undefined fields can be placed. Time fields are structures with separate seconds and nanoseconds fields plus a reserved field in case we want to add even finer resolution. Note that times will be negative if before 1970; in such a case, the nanosecond fields will also be negative if not zero. The bits defined in the stx_attributes field convey information about a file, how it is accessed, where it is and what it does. The following attributes map to FS_*_FL flags and are the same numerical value: STATX_ATTR_COMPRESSED File is compressed by the fs STATX_ATTR_IMMUTABLE File is marked immutable STATX_ATTR_APPEND File is append-only STATX_ATTR_NODUMP File is not to be dumped STATX_ATTR_ENCRYPTED File requires key to decrypt in fs Within the kernel, the supported flags are listed by: KSTAT_ATTR_FS_IOC_FLAGS [Are any other IOC flags of sufficient general interest to be exposed through this interface?] New flags include: STATX_ATTR_AUTOMOUNT Object is an automount trigger These are for the use of GUI tools that might want to mark files specially, depending on what they are. Fields in struct statx come in a number of classes: (0) stx_dev_*, stx_blksize. These are local system information and are always available. (1) stx_mode, stx_nlinks, stx_uid, stx_gid, stx_[amc]time, stx_ino, stx_size, stx_blocks. These will be returned whether the caller asks for them or not. The corresponding bits in stx_mask will be set to indicate whether they actually have valid values. If the caller didn't ask for them, then they may be approximated. For example, NFS won't waste any time updating them from the server, unless as a byproduct of updating something requested. If the values don't actually exist for the underlying object (such as UID or GID on a DOS file), then the bit won't be set in the stx_mask, even if the caller asked for the value. In such a case, the returned value will be a fabrication. Note that there are instances where the type might not be valid, for instance Windows reparse points. (2) stx_rdev_*. This will be set only if stx_mode indicates we're looking at a blockdev or a chardev, otherwise will be 0. (3) stx_btime. Similar to (1), except this will be set to 0 if it doesn't exist. ======= TESTING ======= The following test program can be used to test the statx system call: samples/statx/test-statx.c Just compile and run, passing it paths to the files you want to examine. The file is built automatically if CONFIG_SAMPLES is enabled. Here's some example output. Firstly, an NFS directory that crosses to another FSID. Note that the AUTOMOUNT attribute is set because transiting this directory will cause d_automount to be invoked by the VFS. [root@andromeda ~]# /tmp/test-statx -A /warthog/data statx(/warthog/data) = 0 results=7ff Size: 4096 Blocks: 8 IO Block: 1048576 directory Device: 00:26 Inode: 1703937 Links: 125 Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041 Access: 2016-11-24 09:02:12.219699527+0000 Modify: 2016-11-17 10:44:36.225653653+0000 Change: 2016-11-17 10:44:36.225653653+0000 Attributes: 0000000000001000 (-------- -------- -------- -------- -------- -------- ---m---- --------) Secondly, the result of automounting on that directory. [root@andromeda ~]# /tmp/test-statx /warthog/data statx(/warthog/data) = 0 results=7ff Size: 4096 Blocks: 8 IO Block: 1048576 directory Device: 00:27 Inode: 2 Links: 125 Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041 Access: 2016-11-24 09:02:12.219699527+0000 Modify: 2016-11-17 10:44:36.225653653+0000 Change: 2016-11-17 10:44:36.225653653+0000 Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-01-31 09:46:22 -07:00
err = vfs_getattr(&upperpath, &stat,
STATX_BASIC_STATS, AT_STATX_SYNC_AS_STAT);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
if (err)
goto out_unlock;
err = -ESTALE;
if (!S_ISDIR(stat.mode))
goto out_unlock;
upper = upperpath.dentry;
if (upper->d_parent->d_inode != udir)
goto out_unlock;
ovl: remove unused arg from ovl_lookup_temp() Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-05-19 01:33:49 -06:00
opaquedir = ovl_lookup_temp(workdir);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
err = PTR_ERR(opaquedir);
if (IS_ERR(opaquedir))
goto out_unlock;
ovl: clean up kstat usage FWIW, there's a bit of abuse of struct kstat in overlayfs object creation paths - for one thing, it ends up with a very small subset of struct kstat (mode + rdev), for another it also needs link in case of symlinks and ends up passing it separately. IMO it would be better to introduce a separate object for that. In principle, we might even lift that thing into general API and switch ->mkdir()/->mknod()/->symlink() to identical calling conventions. Hell knows, perhaps ->create() as well... Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-04 10:33:17 -07:00
err = ovl_create_real(wdir, opaquedir,
&(struct cattr){.mode = stat.mode}, NULL, true);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
if (err)
goto out_dput;
err = ovl_copy_xattr(upper, opaquedir);
if (err)
goto out_cleanup;
ovl: opaque cleanup oe->opaque is set for a) whiteouts b) directories having the "trusted.overlay.opaque" xattr Case b can be simplified, since setting the xattr always implies setting oe->opaque. Also once set, the opaque flag is never cleared. Don't need to set opaque flag for non-directories. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 03:02:57 -07:00
err = ovl_set_opaque(dentry, opaquedir);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
if (err)
goto out_cleanup;
wrappers for ->i_mutex access parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested}, inode_foo(inode) being mutex_foo(&inode->i_mutex). Please, use those for access to ->i_mutex; over the coming cycle ->i_mutex will become rwsem, with ->lookup() done with it held only shared. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-22 13:40:57 -07:00
inode_lock(opaquedir->d_inode);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
err = ovl_set_attr(opaquedir, &stat);
wrappers for ->i_mutex access parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested}, inode_foo(inode) being mutex_foo(&inode->i_mutex). Please, use those for access to ->i_mutex; over the coming cycle ->i_mutex will become rwsem, with ->lookup() done with it held only shared. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-22 13:40:57 -07:00
inode_unlock(opaquedir->d_inode);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
if (err)
goto out_cleanup;
err = ovl_do_rename(wdir, opaquedir, udir, upper, RENAME_EXCHANGE);
if (err)
goto out_cleanup;
ovl_cleanup_whiteouts(upper, list);
ovl_cleanup(wdir, upper);
unlock_rename(workdir, upperdir);
/* dentry's upper doesn't match now, get rid of it */
d_drop(dentry);
return opaquedir;
out_cleanup:
ovl_cleanup(wdir, opaquedir);
out_dput:
dput(opaquedir);
out_unlock:
unlock_rename(workdir, upperdir);
out:
return ERR_PTR(err);
}
ovl: fix remove/copy-up race ovl_remove_and_whiteout() needs to check if upper dentry exists or not after having locked upper parent directory. Previously we used a "type" value computed before locking the upper parent directory, which is susceptible to racing with copy-up. There's a similar check in ovl_check_empty_and_clear(). This one is not actually racy, since copy-up doesn't change the "emptyness" property of a directory. Add a comment to this effect, and check the existence of upper dentry locally to make the code cleaner. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-11-20 08:39:59 -07:00
static struct dentry *ovl_check_empty_and_clear(struct dentry *dentry)
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
{
int err;
struct dentry *ret = NULL;
ovl: simplify empty checking The empty checking logic is duplicated in ovl_check_empty_and_clear() and ovl_remove_and_whiteout(), except the condition for clearing whiteouts is different: ovl_check_empty_and_clear() checked for being upper ovl_remove_and_whiteout() checked for merge OR lower Move the intersection of those checks (upper AND merge) into ovl_check_empty_and_clear() and simplify ovl_remove_and_whiteout(). Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-29 04:05:25 -06:00
enum ovl_path_type type = ovl_path_type(dentry);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
LIST_HEAD(list);
err = ovl_check_empty_dir(dentry, &list);
ovl: simplify empty checking The empty checking logic is duplicated in ovl_check_empty_and_clear() and ovl_remove_and_whiteout(), except the condition for clearing whiteouts is different: ovl_check_empty_and_clear() checked for being upper ovl_remove_and_whiteout() checked for merge OR lower Move the intersection of those checks (upper AND merge) into ovl_check_empty_and_clear() and simplify ovl_remove_and_whiteout(). Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-29 04:05:25 -06:00
if (err) {
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
ret = ERR_PTR(err);
ovl: simplify empty checking The empty checking logic is duplicated in ovl_check_empty_and_clear() and ovl_remove_and_whiteout(), except the condition for clearing whiteouts is different: ovl_check_empty_and_clear() checked for being upper ovl_remove_and_whiteout() checked for merge OR lower Move the intersection of those checks (upper AND merge) into ovl_check_empty_and_clear() and simplify ovl_remove_and_whiteout(). Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-29 04:05:25 -06:00
goto out_free;
ovl: fix remove/copy-up race ovl_remove_and_whiteout() needs to check if upper dentry exists or not after having locked upper parent directory. Previously we used a "type" value computed before locking the upper parent directory, which is susceptible to racing with copy-up. There's a similar check in ovl_check_empty_and_clear(). This one is not actually racy, since copy-up doesn't change the "emptyness" property of a directory. Add a comment to this effect, and check the existence of upper dentry locally to make the code cleaner. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-11-20 08:39:59 -07:00
}
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
ovl: simplify empty checking The empty checking logic is duplicated in ovl_check_empty_and_clear() and ovl_remove_and_whiteout(), except the condition for clearing whiteouts is different: ovl_check_empty_and_clear() checked for being upper ovl_remove_and_whiteout() checked for merge OR lower Move the intersection of those checks (upper AND merge) into ovl_check_empty_and_clear() and simplify ovl_remove_and_whiteout(). Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-29 04:05:25 -06:00
/*
* When removing an empty opaque directory, then it makes no sense to
* replace it with an exact replica of itself.
*
* If no upperdentry then skip clearing whiteouts.
*
* Can race with copy-up, since we don't hold the upperdir mutex.
* Doesn't matter, since copy-up can't create a non-empty directory
* from an empty one.
*/
if (OVL_TYPE_UPPER(type) && OVL_TYPE_MERGE(type))
ret = ovl_clear_empty(dentry, &list);
out_free:
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
ovl_cache_free(&list);
return ret;
}
ovl: handle umask and posix_acl_default correctly on creation Setting MS_POSIXACL in sb->s_flags has the side effect of passing mode to create functions without masking against umask. Another problem when creating over a whiteout is that the default posix acl is not inherited from the parent dir (because the real parent dir at the time of creation is the work directory). Fix these problems by: a) If upper fs does not have MS_POSIXACL, then mask mode with umask. b) If creating over a whiteout, call posix_acl_create() to get the inherited acls. After creation (but before moving to the final destination) set these acls on the created file. posix_acl_create() also updates the file creation mode as appropriate. Fixes: 39a25b2b3762 ("ovl: define ->get_acl() for overlay inodes") Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-09-01 03:11:59 -06:00
static int ovl_set_upper_acl(struct dentry *upperdentry, const char *name,
const struct posix_acl *acl)
{
void *buffer;
size_t size;
int err;
if (!IS_ENABLED(CONFIG_FS_POSIX_ACL) || !acl)
return 0;
size = posix_acl_to_xattr(NULL, acl, NULL, 0);
buffer = kmalloc(size, GFP_KERNEL);
if (!buffer)
return -ENOMEM;
size = posix_acl_to_xattr(&init_user_ns, acl, buffer, size);
err = size;
if (err < 0)
goto out_free;
err = vfs_setxattr(upperdentry, name, buffer, size, XATTR_CREATE);
out_free:
kfree(buffer);
return err;
}
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
static int ovl_create_over_whiteout(struct dentry *dentry, struct inode *inode,
ovl: clean up kstat usage FWIW, there's a bit of abuse of struct kstat in overlayfs object creation paths - for one thing, it ends up with a very small subset of struct kstat (mode + rdev), for another it also needs link in case of symlinks and ends up passing it separately. IMO it would be better to introduce a separate object for that. In principle, we might even lift that thing into general API and switch ->mkdir()/->mknod()/->symlink() to identical calling conventions. Hell knows, perhaps ->create() as well... Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-04 10:33:17 -07:00
struct cattr *cattr,
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
struct dentry *hardlink)
{
struct dentry *workdir = ovl_workdir(dentry);
struct inode *wdir = workdir->d_inode;
struct dentry *upperdir = ovl_dentry_upper(dentry->d_parent);
struct inode *udir = upperdir->d_inode;
struct dentry *upper;
struct dentry *newdentry;
int err;
ovl: handle umask and posix_acl_default correctly on creation Setting MS_POSIXACL in sb->s_flags has the side effect of passing mode to create functions without masking against umask. Another problem when creating over a whiteout is that the default posix acl is not inherited from the parent dir (because the real parent dir at the time of creation is the work directory). Fix these problems by: a) If upper fs does not have MS_POSIXACL, then mask mode with umask. b) If creating over a whiteout, call posix_acl_create() to get the inherited acls. After creation (but before moving to the final destination) set these acls on the created file. posix_acl_create() also updates the file creation mode as appropriate. Fixes: 39a25b2b3762 ("ovl: define ->get_acl() for overlay inodes") Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-09-01 03:11:59 -06:00
struct posix_acl *acl, *default_acl;
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
ovl: mount read-only if workdir can't be created OpenWRT folks reported that overlayfs fails to mount if upper fs is full, because workdir can't be created. Wordir creation can fail for various other reasons too. There's no reason that the mount itself should fail, overlayfs can work fine without a workdir, as long as the overlay isn't modified. So mount it read-only and don't allow remounting read-write. Add a couple of WARN_ON()s for the impossible case of workdir being used despite being read-only. Reported-by: Bastian Bittorf <bittorf@bluebottle.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: <stable@vger.kernel.org> # v3.18+
2015-05-19 06:30:12 -06:00
if (WARN_ON(!workdir))
return -EROFS;
ovl: handle umask and posix_acl_default correctly on creation Setting MS_POSIXACL in sb->s_flags has the side effect of passing mode to create functions without masking against umask. Another problem when creating over a whiteout is that the default posix acl is not inherited from the parent dir (because the real parent dir at the time of creation is the work directory). Fix these problems by: a) If upper fs does not have MS_POSIXACL, then mask mode with umask. b) If creating over a whiteout, call posix_acl_create() to get the inherited acls. After creation (but before moving to the final destination) set these acls on the created file. posix_acl_create() also updates the file creation mode as appropriate. Fixes: 39a25b2b3762 ("ovl: define ->get_acl() for overlay inodes") Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-09-01 03:11:59 -06:00
if (!hardlink) {
err = posix_acl_create(dentry->d_parent->d_inode,
ovl: clean up kstat usage FWIW, there's a bit of abuse of struct kstat in overlayfs object creation paths - for one thing, it ends up with a very small subset of struct kstat (mode + rdev), for another it also needs link in case of symlinks and ends up passing it separately. IMO it would be better to introduce a separate object for that. In principle, we might even lift that thing into general API and switch ->mkdir()/->mknod()/->symlink() to identical calling conventions. Hell knows, perhaps ->create() as well... Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-04 10:33:17 -07:00
&cattr->mode, &default_acl, &acl);
ovl: handle umask and posix_acl_default correctly on creation Setting MS_POSIXACL in sb->s_flags has the side effect of passing mode to create functions without masking against umask. Another problem when creating over a whiteout is that the default posix acl is not inherited from the parent dir (because the real parent dir at the time of creation is the work directory). Fix these problems by: a) If upper fs does not have MS_POSIXACL, then mask mode with umask. b) If creating over a whiteout, call posix_acl_create() to get the inherited acls. After creation (but before moving to the final destination) set these acls on the created file. posix_acl_create() also updates the file creation mode as appropriate. Fixes: 39a25b2b3762 ("ovl: define ->get_acl() for overlay inodes") Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-09-01 03:11:59 -06:00
if (err)
return err;
}
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
err = ovl_lock_rename_workdir(workdir, upperdir);
if (err)
goto out;
ovl: remove unused arg from ovl_lookup_temp() Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-05-19 01:33:49 -06:00
newdentry = ovl_lookup_temp(workdir);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
err = PTR_ERR(newdentry);
if (IS_ERR(newdentry))
goto out_unlock;
upper = lookup_one_len(dentry->d_name.name, upperdir,
dentry->d_name.len);
err = PTR_ERR(upper);
if (IS_ERR(upper))
goto out_dput;
ovl: clean up kstat usage FWIW, there's a bit of abuse of struct kstat in overlayfs object creation paths - for one thing, it ends up with a very small subset of struct kstat (mode + rdev), for another it also needs link in case of symlinks and ends up passing it separately. IMO it would be better to introduce a separate object for that. In principle, we might even lift that thing into general API and switch ->mkdir()/->mknod()/->symlink() to identical calling conventions. Hell knows, perhaps ->create() as well... Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-04 10:33:17 -07:00
err = ovl_create_real(wdir, newdentry, cattr, hardlink, true);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
if (err)
goto out_dput2;
ovl: fix sgid on directory When creating directory in workdir, the group/sgid inheritance from the parent dir was omitted completely. Fix this by calling inode_init_owner() on overlay inode and using the resulting uid/gid/mode to create the file. Unfortunately the sgid bit can be stripped off due to umask, so need to reset the mode in this case in workdir before moving the directory in place. Reported-by: Eryu Guan <eguan@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-29 04:05:23 -06:00
/*
* mode could have been mutilated due to umask (e.g. sgid directory)
*/
ovl: share inode for hard link Inode attributes are copied up to overlay inode (uid, gid, mode, atime, mtime, ctime) so generic code using these fields works correcty. If a hard link is created in overlayfs separate inodes are allocated for each link. If chmod/chown/etc. is performed on one of the links then the inode belonging to the other ones won't be updated. This patch attempts to fix this by sharing inodes for hard links. Use inode hash (with real inode pointer as a key) to make sure overlay inodes are shared for hard links on upper. Hard links on lower are still split (which is not user observable until the copy-up happens, see Documentation/filesystems/overlayfs.txt under "Non-standard behavior"). The inode is only inserted in the hash if it is non-directoy and upper. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-29 04:05:24 -06:00
if (!hardlink &&
ovl: clean up kstat usage FWIW, there's a bit of abuse of struct kstat in overlayfs object creation paths - for one thing, it ends up with a very small subset of struct kstat (mode + rdev), for another it also needs link in case of symlinks and ends up passing it separately. IMO it would be better to introduce a separate object for that. In principle, we might even lift that thing into general API and switch ->mkdir()/->mknod()/->symlink() to identical calling conventions. Hell knows, perhaps ->create() as well... Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-04 10:33:17 -07:00
!S_ISLNK(cattr->mode) &&
newdentry->d_inode->i_mode != cattr->mode) {
ovl: fix sgid on directory When creating directory in workdir, the group/sgid inheritance from the parent dir was omitted completely. Fix this by calling inode_init_owner() on overlay inode and using the resulting uid/gid/mode to create the file. Unfortunately the sgid bit can be stripped off due to umask, so need to reset the mode in this case in workdir before moving the directory in place. Reported-by: Eryu Guan <eguan@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-29 04:05:23 -06:00
struct iattr attr = {
.ia_valid = ATTR_MODE,
ovl: clean up kstat usage FWIW, there's a bit of abuse of struct kstat in overlayfs object creation paths - for one thing, it ends up with a very small subset of struct kstat (mode + rdev), for another it also needs link in case of symlinks and ends up passing it separately. IMO it would be better to introduce a separate object for that. In principle, we might even lift that thing into general API and switch ->mkdir()/->mknod()/->symlink() to identical calling conventions. Hell knows, perhaps ->create() as well... Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-04 10:33:17 -07:00
.ia_mode = cattr->mode,
ovl: fix sgid on directory When creating directory in workdir, the group/sgid inheritance from the parent dir was omitted completely. Fix this by calling inode_init_owner() on overlay inode and using the resulting uid/gid/mode to create the file. Unfortunately the sgid bit can be stripped off due to umask, so need to reset the mode in this case in workdir before moving the directory in place. Reported-by: Eryu Guan <eguan@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-29 04:05:23 -06:00
};
inode_lock(newdentry->d_inode);
err = notify_change(newdentry, &attr, NULL);
inode_unlock(newdentry->d_inode);
if (err)
goto out_cleanup;
}
ovl: handle umask and posix_acl_default correctly on creation Setting MS_POSIXACL in sb->s_flags has the side effect of passing mode to create functions without masking against umask. Another problem when creating over a whiteout is that the default posix acl is not inherited from the parent dir (because the real parent dir at the time of creation is the work directory). Fix these problems by: a) If upper fs does not have MS_POSIXACL, then mask mode with umask. b) If creating over a whiteout, call posix_acl_create() to get the inherited acls. After creation (but before moving to the final destination) set these acls on the created file. posix_acl_create() also updates the file creation mode as appropriate. Fixes: 39a25b2b3762 ("ovl: define ->get_acl() for overlay inodes") Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-09-01 03:11:59 -06:00
if (!hardlink) {
err = ovl_set_upper_acl(newdentry, XATTR_NAME_POSIX_ACL_ACCESS,
acl);
if (err)
goto out_cleanup;
err = ovl_set_upper_acl(newdentry, XATTR_NAME_POSIX_ACL_DEFAULT,
default_acl);
if (err)
goto out_cleanup;
}
ovl: fix sgid on directory When creating directory in workdir, the group/sgid inheritance from the parent dir was omitted completely. Fix this by calling inode_init_owner() on overlay inode and using the resulting uid/gid/mode to create the file. Unfortunately the sgid bit can be stripped off due to umask, so need to reset the mode in this case in workdir before moving the directory in place. Reported-by: Eryu Guan <eguan@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-29 04:05:23 -06:00
ovl: clean up kstat usage FWIW, there's a bit of abuse of struct kstat in overlayfs object creation paths - for one thing, it ends up with a very small subset of struct kstat (mode + rdev), for another it also needs link in case of symlinks and ends up passing it separately. IMO it would be better to introduce a separate object for that. In principle, we might even lift that thing into general API and switch ->mkdir()/->mknod()/->symlink() to identical calling conventions. Hell knows, perhaps ->create() as well... Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-04 10:33:17 -07:00
if (!hardlink && S_ISDIR(cattr->mode)) {
ovl: opaque cleanup oe->opaque is set for a) whiteouts b) directories having the "trusted.overlay.opaque" xattr Case b can be simplified, since setting the xattr always implies setting oe->opaque. Also once set, the opaque flag is never cleared. Don't need to set opaque flag for non-directories. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 03:02:57 -07:00
err = ovl_set_opaque(dentry, newdentry);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
if (err)
goto out_cleanup;
err = ovl_do_rename(wdir, newdentry, udir, upper,
RENAME_EXCHANGE);
if (err)
goto out_cleanup;
ovl_cleanup(wdir, upper);
} else {
err = ovl_do_rename(wdir, newdentry, udir, upper, 0);
if (err)
goto out_cleanup;
}
ovl: share inode for hard link Inode attributes are copied up to overlay inode (uid, gid, mode, atime, mtime, ctime) so generic code using these fields works correcty. If a hard link is created in overlayfs separate inodes are allocated for each link. If chmod/chown/etc. is performed on one of the links then the inode belonging to the other ones won't be updated. This patch attempts to fix this by sharing inodes for hard links. Use inode hash (with real inode pointer as a key) to make sure overlay inodes are shared for hard links on upper. Hard links on lower are still split (which is not user observable until the copy-up happens, see Documentation/filesystems/overlayfs.txt under "Non-standard behavior"). The inode is only inserted in the hash if it is non-directoy and upper. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-29 04:05:24 -06:00
ovl_instantiate(dentry, inode, newdentry, !!hardlink);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
newdentry = NULL;
out_dput2:
dput(upper);
out_dput:
dput(newdentry);
out_unlock:
unlock_rename(workdir, upperdir);
out:
ovl: handle umask and posix_acl_default correctly on creation Setting MS_POSIXACL in sb->s_flags has the side effect of passing mode to create functions without masking against umask. Another problem when creating over a whiteout is that the default posix acl is not inherited from the parent dir (because the real parent dir at the time of creation is the work directory). Fix these problems by: a) If upper fs does not have MS_POSIXACL, then mask mode with umask. b) If creating over a whiteout, call posix_acl_create() to get the inherited acls. After creation (but before moving to the final destination) set these acls on the created file. posix_acl_create() also updates the file creation mode as appropriate. Fixes: 39a25b2b3762 ("ovl: define ->get_acl() for overlay inodes") Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-09-01 03:11:59 -06:00
if (!hardlink) {
posix_acl_release(acl);
posix_acl_release(default_acl);
}
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
return err;
out_cleanup:
ovl_cleanup(wdir, newdentry);
goto out_dput2;
}
ovl: share inode for hard link Inode attributes are copied up to overlay inode (uid, gid, mode, atime, mtime, ctime) so generic code using these fields works correcty. If a hard link is created in overlayfs separate inodes are allocated for each link. If chmod/chown/etc. is performed on one of the links then the inode belonging to the other ones won't be updated. This patch attempts to fix this by sharing inodes for hard links. Use inode hash (with real inode pointer as a key) to make sure overlay inodes are shared for hard links on upper. Hard links on lower are still split (which is not user observable until the copy-up happens, see Documentation/filesystems/overlayfs.txt under "Non-standard behavior"). The inode is only inserted in the hash if it is non-directoy and upper. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-29 04:05:24 -06:00
static int ovl_create_or_link(struct dentry *dentry, struct inode *inode,
ovl: clean up kstat usage FWIW, there's a bit of abuse of struct kstat in overlayfs object creation paths - for one thing, it ends up with a very small subset of struct kstat (mode + rdev), for another it also needs link in case of symlinks and ends up passing it separately. IMO it would be better to introduce a separate object for that. In principle, we might even lift that thing into general API and switch ->mkdir()/->mknod()/->symlink() to identical calling conventions. Hell knows, perhaps ->create() as well... Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-04 10:33:17 -07:00
struct cattr *attr, struct dentry *hardlink)
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
{
int err;
ovl: do operations on underlying file system in mounter's context Given we are now doing checks both on overlay inode as well underlying inode, we should be able to do checks and operations on underlying file system using mounter's context. So modify all operations to do checks/operations on underlying dentry/inode in the context of mounter. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-01 14:34:28 -06:00
const struct cred *old_cred;
struct cred *override_cred;
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
err = ovl_copy_up(dentry->d_parent);
if (err)
ovl: share inode for hard link Inode attributes are copied up to overlay inode (uid, gid, mode, atime, mtime, ctime) so generic code using these fields works correcty. If a hard link is created in overlayfs separate inodes are allocated for each link. If chmod/chown/etc. is performed on one of the links then the inode belonging to the other ones won't be updated. This patch attempts to fix this by sharing inodes for hard links. Use inode hash (with real inode pointer as a key) to make sure overlay inodes are shared for hard links on upper. Hard links on lower are still split (which is not user observable until the copy-up happens, see Documentation/filesystems/overlayfs.txt under "Non-standard behavior"). The inode is only inserted in the hash if it is non-directoy and upper. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-29 04:05:24 -06:00
return err;
ovl: fix sgid on directory When creating directory in workdir, the group/sgid inheritance from the parent dir was omitted completely. Fix this by calling inode_init_owner() on overlay inode and using the resulting uid/gid/mode to create the file. Unfortunately the sgid bit can be stripped off due to umask, so need to reset the mode in this case in workdir before moving the directory in place. Reported-by: Eryu Guan <eguan@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-29 04:05:23 -06:00
ovl: do operations on underlying file system in mounter's context Given we are now doing checks both on overlay inode as well underlying inode, we should be able to do checks and operations on underlying file system using mounter's context. So modify all operations to do checks/operations on underlying dentry/inode in the context of mounter. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-01 14:34:28 -06:00
old_cred = ovl_override_creds(dentry->d_sb);
err = -ENOMEM;
override_cred = prepare_creds();
if (override_cred) {
ovl: fix sgid on directory When creating directory in workdir, the group/sgid inheritance from the parent dir was omitted completely. Fix this by calling inode_init_owner() on overlay inode and using the resulting uid/gid/mode to create the file. Unfortunately the sgid bit can be stripped off due to umask, so need to reset the mode in this case in workdir before moving the directory in place. Reported-by: Eryu Guan <eguan@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-29 04:05:23 -06:00
override_cred->fsuid = inode->i_uid;
override_cred->fsgid = inode->i_gid;
security, overlayfs: Provide hook to correctly label newly created files During a new file creation we need to make sure new file is created with the right label. New file is created in upper/ so effectively file should get label as if task had created file in upper/. We switched to mounter's creds for actual file creation. Also if there is a whiteout present, then file will be created in work/ dir first and then renamed in upper. In none of the cases file will be labeled as we want it to be. This patch introduces a new hook dentry_create_files_as(), which determines the label/context dentry will get if it had been created by task in upper and modify passed set of creds appropriately. Caller makes use of these new creds for file creation. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Stephen Smalley <sds@tycho.nsa.gov> [PM: fix whitespace issues found with checkpatch.pl] [PM: changes to use stat->mode in ovl_create_or_link()] Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-07-13 08:44:52 -06:00
if (!hardlink) {
err = security_dentry_create_files_as(dentry,
ovl: clean up kstat usage FWIW, there's a bit of abuse of struct kstat in overlayfs object creation paths - for one thing, it ends up with a very small subset of struct kstat (mode + rdev), for another it also needs link in case of symlinks and ends up passing it separately. IMO it would be better to introduce a separate object for that. In principle, we might even lift that thing into general API and switch ->mkdir()/->mknod()/->symlink() to identical calling conventions. Hell knows, perhaps ->create() as well... Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-04 10:33:17 -07:00
attr->mode, &dentry->d_name, old_cred,
security, overlayfs: Provide hook to correctly label newly created files During a new file creation we need to make sure new file is created with the right label. New file is created in upper/ so effectively file should get label as if task had created file in upper/. We switched to mounter's creds for actual file creation. Also if there is a whiteout present, then file will be created in work/ dir first and then renamed in upper. In none of the cases file will be labeled as we want it to be. This patch introduces a new hook dentry_create_files_as(), which determines the label/context dentry will get if it had been created by task in upper and modify passed set of creds appropriately. Caller makes use of these new creds for file creation. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Stephen Smalley <sds@tycho.nsa.gov> [PM: fix whitespace issues found with checkpatch.pl] [PM: changes to use stat->mode in ovl_create_or_link()] Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-07-13 08:44:52 -06:00
override_cred);
if (err) {
put_cred(override_cred);
goto out_revert_creds;
}
}
ovl: do operations on underlying file system in mounter's context Given we are now doing checks both on overlay inode as well underlying inode, we should be able to do checks and operations on underlying file system using mounter's context. So modify all operations to do checks/operations on underlying dentry/inode in the context of mounter. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-01 14:34:28 -06:00
put_cred(override_creds(override_cred));
put_cred(override_cred);
ovl: add ovl_dentry_is_whiteout() And use it instead of ovl_dentry_is_opaque() where appropriate. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 03:02:55 -07:00
if (!ovl_dentry_is_whiteout(dentry))
ovl: clean up kstat usage FWIW, there's a bit of abuse of struct kstat in overlayfs object creation paths - for one thing, it ends up with a very small subset of struct kstat (mode + rdev), for another it also needs link in case of symlinks and ends up passing it separately. IMO it would be better to introduce a separate object for that. In principle, we might even lift that thing into general API and switch ->mkdir()/->mknod()/->symlink() to identical calling conventions. Hell knows, perhaps ->create() as well... Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-04 10:33:17 -07:00
err = ovl_create_upper(dentry, inode, attr,
ovl: do operations on underlying file system in mounter's context Given we are now doing checks both on overlay inode as well underlying inode, we should be able to do checks and operations on underlying file system using mounter's context. So modify all operations to do checks/operations on underlying dentry/inode in the context of mounter. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-01 14:34:28 -06:00
hardlink);
else
ovl: clean up kstat usage FWIW, there's a bit of abuse of struct kstat in overlayfs object creation paths - for one thing, it ends up with a very small subset of struct kstat (mode + rdev), for another it also needs link in case of symlinks and ends up passing it separately. IMO it would be better to introduce a separate object for that. In principle, we might even lift that thing into general API and switch ->mkdir()/->mknod()/->symlink() to identical calling conventions. Hell knows, perhaps ->create() as well... Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-04 10:33:17 -07:00
err = ovl_create_over_whiteout(dentry, inode, attr,
hardlink);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
}
security, overlayfs: Provide hook to correctly label newly created files During a new file creation we need to make sure new file is created with the right label. New file is created in upper/ so effectively file should get label as if task had created file in upper/. We switched to mounter's creds for actual file creation. Also if there is a whiteout present, then file will be created in work/ dir first and then renamed in upper. In none of the cases file will be labeled as we want it to be. This patch introduces a new hook dentry_create_files_as(), which determines the label/context dentry will get if it had been created by task in upper and modify passed set of creds appropriately. Caller makes use of these new creds for file creation. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Stephen Smalley <sds@tycho.nsa.gov> [PM: fix whitespace issues found with checkpatch.pl] [PM: changes to use stat->mode in ovl_create_or_link()] Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-07-13 08:44:52 -06:00
out_revert_creds:
ovl: do operations on underlying file system in mounter's context Given we are now doing checks both on overlay inode as well underlying inode, we should be able to do checks and operations on underlying file system using mounter's context. So modify all operations to do checks/operations on underlying dentry/inode in the context of mounter. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-01 14:34:28 -06:00
revert_creds(old_cred);
ovl: fix sgid on directory When creating directory in workdir, the group/sgid inheritance from the parent dir was omitted completely. Fix this by calling inode_init_owner() on overlay inode and using the resulting uid/gid/mode to create the file. Unfortunately the sgid bit can be stripped off due to umask, so need to reset the mode in this case in workdir before moving the directory in place. Reported-by: Eryu Guan <eguan@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-29 04:05:23 -06:00
if (!err) {
struct inode *realinode = d_inode(ovl_dentry_upper(dentry));
WARN_ON(inode->i_mode != realinode->i_mode);
WARN_ON(!uid_eq(inode->i_uid, realinode->i_uid));
WARN_ON(!gid_eq(inode->i_gid, realinode->i_gid));
}
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
return err;
}
static int ovl_create_object(struct dentry *dentry, int mode, dev_t rdev,
const char *link)
{
int err;
ovl: share inode for hard link Inode attributes are copied up to overlay inode (uid, gid, mode, atime, mtime, ctime) so generic code using these fields works correcty. If a hard link is created in overlayfs separate inodes are allocated for each link. If chmod/chown/etc. is performed on one of the links then the inode belonging to the other ones won't be updated. This patch attempts to fix this by sharing inodes for hard links. Use inode hash (with real inode pointer as a key) to make sure overlay inodes are shared for hard links on upper. Hard links on lower are still split (which is not user observable until the copy-up happens, see Documentation/filesystems/overlayfs.txt under "Non-standard behavior"). The inode is only inserted in the hash if it is non-directoy and upper. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-29 04:05:24 -06:00
struct inode *inode;
ovl: clean up kstat usage FWIW, there's a bit of abuse of struct kstat in overlayfs object creation paths - for one thing, it ends up with a very small subset of struct kstat (mode + rdev), for another it also needs link in case of symlinks and ends up passing it separately. IMO it would be better to introduce a separate object for that. In principle, we might even lift that thing into general API and switch ->mkdir()/->mknod()/->symlink() to identical calling conventions. Hell knows, perhaps ->create() as well... Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-04 10:33:17 -07:00
struct cattr attr = {
ovl: share inode for hard link Inode attributes are copied up to overlay inode (uid, gid, mode, atime, mtime, ctime) so generic code using these fields works correcty. If a hard link is created in overlayfs separate inodes are allocated for each link. If chmod/chown/etc. is performed on one of the links then the inode belonging to the other ones won't be updated. This patch attempts to fix this by sharing inodes for hard links. Use inode hash (with real inode pointer as a key) to make sure overlay inodes are shared for hard links on upper. Hard links on lower are still split (which is not user observable until the copy-up happens, see Documentation/filesystems/overlayfs.txt under "Non-standard behavior"). The inode is only inserted in the hash if it is non-directoy and upper. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-29 04:05:24 -06:00
.rdev = rdev,
ovl: clean up kstat usage FWIW, there's a bit of abuse of struct kstat in overlayfs object creation paths - for one thing, it ends up with a very small subset of struct kstat (mode + rdev), for another it also needs link in case of symlinks and ends up passing it separately. IMO it would be better to introduce a separate object for that. In principle, we might even lift that thing into general API and switch ->mkdir()/->mknod()/->symlink() to identical calling conventions. Hell knows, perhaps ->create() as well... Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-04 10:33:17 -07:00
.link = link,
ovl: share inode for hard link Inode attributes are copied up to overlay inode (uid, gid, mode, atime, mtime, ctime) so generic code using these fields works correcty. If a hard link is created in overlayfs separate inodes are allocated for each link. If chmod/chown/etc. is performed on one of the links then the inode belonging to the other ones won't be updated. This patch attempts to fix this by sharing inodes for hard links. Use inode hash (with real inode pointer as a key) to make sure overlay inodes are shared for hard links on upper. Hard links on lower are still split (which is not user observable until the copy-up happens, see Documentation/filesystems/overlayfs.txt under "Non-standard behavior"). The inode is only inserted in the hash if it is non-directoy and upper. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-29 04:05:24 -06:00
};
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
err = ovl_want_write(dentry);
ovl: share inode for hard link Inode attributes are copied up to overlay inode (uid, gid, mode, atime, mtime, ctime) so generic code using these fields works correcty. If a hard link is created in overlayfs separate inodes are allocated for each link. If chmod/chown/etc. is performed on one of the links then the inode belonging to the other ones won't be updated. This patch attempts to fix this by sharing inodes for hard links. Use inode hash (with real inode pointer as a key) to make sure overlay inodes are shared for hard links on upper. Hard links on lower are still split (which is not user observable until the copy-up happens, see Documentation/filesystems/overlayfs.txt under "Non-standard behavior"). The inode is only inserted in the hash if it is non-directoy and upper. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-29 04:05:24 -06:00
if (err)
goto out;
err = -ENOMEM;
ovl: treat special files like a regular fs No sense in opening special files on the underlying layers, they work just as well if opened on the overlay. Side effect is that it's no longer possible to connect one side of a pipe opened on overlayfs with the other side opened on the underlying layer. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 03:02:55 -07:00
inode = ovl_new_inode(dentry->d_sb, mode, rdev);
ovl: share inode for hard link Inode attributes are copied up to overlay inode (uid, gid, mode, atime, mtime, ctime) so generic code using these fields works correcty. If a hard link is created in overlayfs separate inodes are allocated for each link. If chmod/chown/etc. is performed on one of the links then the inode belonging to the other ones won't be updated. This patch attempts to fix this by sharing inodes for hard links. Use inode hash (with real inode pointer as a key) to make sure overlay inodes are shared for hard links on upper. Hard links on lower are still split (which is not user observable until the copy-up happens, see Documentation/filesystems/overlayfs.txt under "Non-standard behavior"). The inode is only inserted in the hash if it is non-directoy and upper. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-29 04:05:24 -06:00
if (!inode)
goto out_drop_write;
inode_init_owner(inode, dentry->d_parent->d_inode, mode);
ovl: clean up kstat usage FWIW, there's a bit of abuse of struct kstat in overlayfs object creation paths - for one thing, it ends up with a very small subset of struct kstat (mode + rdev), for another it also needs link in case of symlinks and ends up passing it separately. IMO it would be better to introduce a separate object for that. In principle, we might even lift that thing into general API and switch ->mkdir()/->mknod()/->symlink() to identical calling conventions. Hell knows, perhaps ->create() as well... Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-04 10:33:17 -07:00
attr.mode = inode->i_mode;
ovl: share inode for hard link Inode attributes are copied up to overlay inode (uid, gid, mode, atime, mtime, ctime) so generic code using these fields works correcty. If a hard link is created in overlayfs separate inodes are allocated for each link. If chmod/chown/etc. is performed on one of the links then the inode belonging to the other ones won't be updated. This patch attempts to fix this by sharing inodes for hard links. Use inode hash (with real inode pointer as a key) to make sure overlay inodes are shared for hard links on upper. Hard links on lower are still split (which is not user observable until the copy-up happens, see Documentation/filesystems/overlayfs.txt under "Non-standard behavior"). The inode is only inserted in the hash if it is non-directoy and upper. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-29 04:05:24 -06:00
ovl: clean up kstat usage FWIW, there's a bit of abuse of struct kstat in overlayfs object creation paths - for one thing, it ends up with a very small subset of struct kstat (mode + rdev), for another it also needs link in case of symlinks and ends up passing it separately. IMO it would be better to introduce a separate object for that. In principle, we might even lift that thing into general API and switch ->mkdir()/->mknod()/->symlink() to identical calling conventions. Hell knows, perhaps ->create() as well... Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-04 10:33:17 -07:00
err = ovl_create_or_link(dentry, inode, &attr, NULL);
ovl: share inode for hard link Inode attributes are copied up to overlay inode (uid, gid, mode, atime, mtime, ctime) so generic code using these fields works correcty. If a hard link is created in overlayfs separate inodes are allocated for each link. If chmod/chown/etc. is performed on one of the links then the inode belonging to the other ones won't be updated. This patch attempts to fix this by sharing inodes for hard links. Use inode hash (with real inode pointer as a key) to make sure overlay inodes are shared for hard links on upper. Hard links on lower are still split (which is not user observable until the copy-up happens, see Documentation/filesystems/overlayfs.txt under "Non-standard behavior"). The inode is only inserted in the hash if it is non-directoy and upper. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-29 04:05:24 -06:00
if (err)
iput(inode);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
ovl: share inode for hard link Inode attributes are copied up to overlay inode (uid, gid, mode, atime, mtime, ctime) so generic code using these fields works correcty. If a hard link is created in overlayfs separate inodes are allocated for each link. If chmod/chown/etc. is performed on one of the links then the inode belonging to the other ones won't be updated. This patch attempts to fix this by sharing inodes for hard links. Use inode hash (with real inode pointer as a key) to make sure overlay inodes are shared for hard links on upper. Hard links on lower are still split (which is not user observable until the copy-up happens, see Documentation/filesystems/overlayfs.txt under "Non-standard behavior"). The inode is only inserted in the hash if it is non-directoy and upper. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-29 04:05:24 -06:00
out_drop_write:
ovl_drop_write(dentry);
out:
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
return err;
}
static int ovl_create(struct inode *dir, struct dentry *dentry, umode_t mode,
bool excl)
{
return ovl_create_object(dentry, (mode & 07777) | S_IFREG, 0, NULL);
}
static int ovl_mkdir(struct inode *dir, struct dentry *dentry, umode_t mode)
{
return ovl_create_object(dentry, (mode & 07777) | S_IFDIR, 0, NULL);
}
static int ovl_mknod(struct inode *dir, struct dentry *dentry, umode_t mode,
dev_t rdev)
{
/* Don't allow creation of "whiteout" on overlay */
if (S_ISCHR(mode) && rdev == WHITEOUT_DEV)
return -EPERM;
return ovl_create_object(dentry, mode, rdev, NULL);
}
static int ovl_symlink(struct inode *dir, struct dentry *dentry,
const char *link)
{
return ovl_create_object(dentry, S_IFLNK, 0, link);
}
static int ovl_link(struct dentry *old, struct inode *newdir,
struct dentry *new)
{
int err;
ovl: share inode for hard link Inode attributes are copied up to overlay inode (uid, gid, mode, atime, mtime, ctime) so generic code using these fields works correcty. If a hard link is created in overlayfs separate inodes are allocated for each link. If chmod/chown/etc. is performed on one of the links then the inode belonging to the other ones won't be updated. This patch attempts to fix this by sharing inodes for hard links. Use inode hash (with real inode pointer as a key) to make sure overlay inodes are shared for hard links on upper. Hard links on lower are still split (which is not user observable until the copy-up happens, see Documentation/filesystems/overlayfs.txt under "Non-standard behavior"). The inode is only inserted in the hash if it is non-directoy and upper. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-29 04:05:24 -06:00
struct inode *inode;
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
err = ovl_want_write(old);
if (err)
goto out;
err = ovl_copy_up(old);
if (err)
goto out_drop_write;
ovl: share inode for hard link Inode attributes are copied up to overlay inode (uid, gid, mode, atime, mtime, ctime) so generic code using these fields works correcty. If a hard link is created in overlayfs separate inodes are allocated for each link. If chmod/chown/etc. is performed on one of the links then the inode belonging to the other ones won't be updated. This patch attempts to fix this by sharing inodes for hard links. Use inode hash (with real inode pointer as a key) to make sure overlay inodes are shared for hard links on upper. Hard links on lower are still split (which is not user observable until the copy-up happens, see Documentation/filesystems/overlayfs.txt under "Non-standard behavior"). The inode is only inserted in the hash if it is non-directoy and upper. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-29 04:05:24 -06:00
inode = d_inode(old);
ihold(inode);
ovl: clean up kstat usage FWIW, there's a bit of abuse of struct kstat in overlayfs object creation paths - for one thing, it ends up with a very small subset of struct kstat (mode + rdev), for another it also needs link in case of symlinks and ends up passing it separately. IMO it would be better to introduce a separate object for that. In principle, we might even lift that thing into general API and switch ->mkdir()/->mknod()/->symlink() to identical calling conventions. Hell knows, perhaps ->create() as well... Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-04 10:33:17 -07:00
err = ovl_create_or_link(new, inode, NULL, ovl_dentry_upper(old));
ovl: share inode for hard link Inode attributes are copied up to overlay inode (uid, gid, mode, atime, mtime, ctime) so generic code using these fields works correcty. If a hard link is created in overlayfs separate inodes are allocated for each link. If chmod/chown/etc. is performed on one of the links then the inode belonging to the other ones won't be updated. This patch attempts to fix this by sharing inodes for hard links. Use inode hash (with real inode pointer as a key) to make sure overlay inodes are shared for hard links on upper. Hard links on lower are still split (which is not user observable until the copy-up happens, see Documentation/filesystems/overlayfs.txt under "Non-standard behavior"). The inode is only inserted in the hash if it is non-directoy and upper. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-29 04:05:24 -06:00
if (err)
iput(inode);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
out_drop_write:
ovl_drop_write(old);
out:
return err;
}
ovl: compare inodes When checking for consistency in directory operations (unlink, rename, etc.) match inodes not dentries. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-07-04 14:03:16 -06:00
static bool ovl_matches_upper(struct dentry *dentry, struct dentry *upper)
{
return d_inode(ovl_dentry_upper(dentry)) == d_inode(upper);
}
ovl: fix remove/copy-up race ovl_remove_and_whiteout() needs to check if upper dentry exists or not after having locked upper parent directory. Previously we used a "type" value computed before locking the upper parent directory, which is susceptible to racing with copy-up. There's a similar check in ovl_check_empty_and_clear(). This one is not actually racy, since copy-up doesn't change the "emptyness" property of a directory. Add a comment to this effect, and check the existence of upper dentry locally to make the code cleaner. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-11-20 08:39:59 -07:00
static int ovl_remove_and_whiteout(struct dentry *dentry, bool is_dir)
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
{
struct dentry *workdir = ovl_workdir(dentry);
struct inode *wdir = workdir->d_inode;
struct dentry *upperdir = ovl_dentry_upper(dentry->d_parent);
struct inode *udir = upperdir->d_inode;
struct dentry *whiteout;
struct dentry *upper;
struct dentry *opaquedir = NULL;
int err;
ovl: verify upper dentry in ovl_remove_and_whiteout() The upper dentry may become stale before we call ovl_lock_rename_workdir. For example, someone could (mistakenly or maliciously) manually unlink(2) it directly from upperdir. To ensure it is not stale, let's lookup it after ovl_lock_rename_workdir and and check if it matches the upper dentry. Essentially, it is the same problem and similar solution as in commit 11f3710417d0 ("ovl: verify upper dentry before unlink and rename"). Signed-off-by: Maxim Patlasov <mpatlasov@virtuozzo.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Cc: <stable@vger.kernel.org>
2016-07-21 19:24:26 -06:00
int flags = 0;
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
ovl: mount read-only if workdir can't be created OpenWRT folks reported that overlayfs fails to mount if upper fs is full, because workdir can't be created. Wordir creation can fail for various other reasons too. There's no reason that the mount itself should fail, overlayfs can work fine without a workdir, as long as the overlay isn't modified. So mount it read-only and don't allow remounting read-write. Add a couple of WARN_ON()s for the impossible case of workdir being used despite being read-only. Reported-by: Bastian Bittorf <bittorf@bluebottle.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: <stable@vger.kernel.org> # v3.18+
2015-05-19 06:30:12 -06:00
if (WARN_ON(!workdir))
return -EROFS;
ovl: don't remove non-empty opaque directory When removing an opaque directory we can't just call rmdir() to check for emptiness, because the directory will need to be replaced with a whiteout. The replacement is done with RENAME_EXCHANGE, which doesn't check emptiness. Solution is just to check emptiness by reading the directory. In the future we could add a new rename flag to check for emptiness even for RENAME_EXCHANGE to optimize this case. Reported-by: Vincent Batts <vbatts@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Tested-by: Jordi Pujol Palomer <jordipujolp@gmail.com> Fixes: 263b4a0fee43 ("ovl: dont replace opaque dir") Cc: <stable@vger.kernel.org> # v4.0+
2015-05-14 02:04:44 -06:00
if (is_dir) {
ovl: simplify empty checking The empty checking logic is duplicated in ovl_check_empty_and_clear() and ovl_remove_and_whiteout(), except the condition for clearing whiteouts is different: ovl_check_empty_and_clear() checked for being upper ovl_remove_and_whiteout() checked for merge OR lower Move the intersection of those checks (upper AND merge) into ovl_check_empty_and_clear() and simplify ovl_remove_and_whiteout(). Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-29 04:05:25 -06:00
opaquedir = ovl_check_empty_and_clear(dentry);
err = PTR_ERR(opaquedir);
if (IS_ERR(opaquedir))
goto out;
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
}
err = ovl_lock_rename_workdir(workdir, upperdir);
if (err)
goto out_dput;
ovl: verify upper dentry in ovl_remove_and_whiteout() The upper dentry may become stale before we call ovl_lock_rename_workdir. For example, someone could (mistakenly or maliciously) manually unlink(2) it directly from upperdir. To ensure it is not stale, let's lookup it after ovl_lock_rename_workdir and and check if it matches the upper dentry. Essentially, it is the same problem and similar solution as in commit 11f3710417d0 ("ovl: verify upper dentry before unlink and rename"). Signed-off-by: Maxim Patlasov <mpatlasov@virtuozzo.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Cc: <stable@vger.kernel.org>
2016-07-21 19:24:26 -06:00
upper = lookup_one_len(dentry->d_name.name, upperdir,
dentry->d_name.len);
err = PTR_ERR(upper);
if (IS_ERR(upper))
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
goto out_unlock;
ovl: verify upper dentry in ovl_remove_and_whiteout() The upper dentry may become stale before we call ovl_lock_rename_workdir. For example, someone could (mistakenly or maliciously) manually unlink(2) it directly from upperdir. To ensure it is not stale, let's lookup it after ovl_lock_rename_workdir and and check if it matches the upper dentry. Essentially, it is the same problem and similar solution as in commit 11f3710417d0 ("ovl: verify upper dentry before unlink and rename"). Signed-off-by: Maxim Patlasov <mpatlasov@virtuozzo.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Cc: <stable@vger.kernel.org>
2016-07-21 19:24:26 -06:00
err = -ESTALE;
if ((opaquedir && upper != opaquedir) ||
(!opaquedir && ovl_dentry_upper(dentry) &&
ovl: compare inodes When checking for consistency in directory operations (unlink, rename, etc.) match inodes not dentries. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-07-04 14:03:16 -06:00
!ovl_matches_upper(dentry, upper))) {
ovl: verify upper dentry in ovl_remove_and_whiteout() The upper dentry may become stale before we call ovl_lock_rename_workdir. For example, someone could (mistakenly or maliciously) manually unlink(2) it directly from upperdir. To ensure it is not stale, let's lookup it after ovl_lock_rename_workdir and and check if it matches the upper dentry. Essentially, it is the same problem and similar solution as in commit 11f3710417d0 ("ovl: verify upper dentry before unlink and rename"). Signed-off-by: Maxim Patlasov <mpatlasov@virtuozzo.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Cc: <stable@vger.kernel.org>
2016-07-21 19:24:26 -06:00
goto out_dput_upper;
}
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
ovl: verify upper dentry in ovl_remove_and_whiteout() The upper dentry may become stale before we call ovl_lock_rename_workdir. For example, someone could (mistakenly or maliciously) manually unlink(2) it directly from upperdir. To ensure it is not stale, let's lookup it after ovl_lock_rename_workdir and and check if it matches the upper dentry. Essentially, it is the same problem and similar solution as in commit 11f3710417d0 ("ovl: verify upper dentry before unlink and rename"). Signed-off-by: Maxim Patlasov <mpatlasov@virtuozzo.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Cc: <stable@vger.kernel.org>
2016-07-21 19:24:26 -06:00
whiteout = ovl_whiteout(workdir, dentry);
err = PTR_ERR(whiteout);
if (IS_ERR(whiteout))
goto out_dput_upper;
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
ovl: verify upper dentry in ovl_remove_and_whiteout() The upper dentry may become stale before we call ovl_lock_rename_workdir. For example, someone could (mistakenly or maliciously) manually unlink(2) it directly from upperdir. To ensure it is not stale, let's lookup it after ovl_lock_rename_workdir and and check if it matches the upper dentry. Essentially, it is the same problem and similar solution as in commit 11f3710417d0 ("ovl: verify upper dentry before unlink and rename"). Signed-off-by: Maxim Patlasov <mpatlasov@virtuozzo.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Cc: <stable@vger.kernel.org>
2016-07-21 19:24:26 -06:00
if (d_is_dir(upper))
flags = RENAME_EXCHANGE;
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
ovl: verify upper dentry in ovl_remove_and_whiteout() The upper dentry may become stale before we call ovl_lock_rename_workdir. For example, someone could (mistakenly or maliciously) manually unlink(2) it directly from upperdir. To ensure it is not stale, let's lookup it after ovl_lock_rename_workdir and and check if it matches the upper dentry. Essentially, it is the same problem and similar solution as in commit 11f3710417d0 ("ovl: verify upper dentry before unlink and rename"). Signed-off-by: Maxim Patlasov <mpatlasov@virtuozzo.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Cc: <stable@vger.kernel.org>
2016-07-21 19:24:26 -06:00
err = ovl_do_rename(wdir, whiteout, udir, upper, flags);
if (err)
goto kill_whiteout;
if (flags)
ovl_cleanup(wdir, upper);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
ovl_dentry_version_inc(dentry->d_parent);
out_d_drop:
d_drop(dentry);
dput(whiteout);
ovl: verify upper dentry in ovl_remove_and_whiteout() The upper dentry may become stale before we call ovl_lock_rename_workdir. For example, someone could (mistakenly or maliciously) manually unlink(2) it directly from upperdir. To ensure it is not stale, let's lookup it after ovl_lock_rename_workdir and and check if it matches the upper dentry. Essentially, it is the same problem and similar solution as in commit 11f3710417d0 ("ovl: verify upper dentry before unlink and rename"). Signed-off-by: Maxim Patlasov <mpatlasov@virtuozzo.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Cc: <stable@vger.kernel.org>
2016-07-21 19:24:26 -06:00
out_dput_upper:
dput(upper);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
out_unlock:
unlock_rename(workdir, upperdir);
out_dput:
dput(opaquedir);
out:
return err;
kill_whiteout:
ovl_cleanup(wdir, whiteout);
goto out_d_drop;
}
static int ovl_remove_upper(struct dentry *dentry, bool is_dir)
{
struct dentry *upperdir = ovl_dentry_upper(dentry->d_parent);
struct inode *dir = upperdir->d_inode;
ovl: verify upper dentry before unlink and rename Unlink and rename in overlayfs checked the upper dentry for staleness by verifying upper->d_parent against upperdir. However the dentry can go stale also by being unhashed, for example. Expand the verification to actually look up the name again (under parent lock) and check if it matches the upper dentry. This matches what the VFS does before passing the dentry to filesytem's unlink/rename methods, which excludes any inconsistency caused by overlayfs. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-03-21 10:31:44 -06:00
struct dentry *upper;
ovl: check for emptiness of redirect dir Before introducing redirect_dir feature, the condition !ovl_lower_positive(dentry) for a directory, implied that it is a pure upper directory, which may be removed if empty. Now that directory can be redirect, it is possible that upper does not cover any lower (i.e. !ovl_lower_positive(dentry)), but the directory is a merge (with redirected path) and maybe non empty. Check for this case in ovl_remove_upper(). This change fixes the following test case from rename-pop-dir.py of unionmount-testsuite: """Remove dir and rename old name""" d = ctx.non_empty_dir() d2 = ctx.no_dir() ctx.rmdir(d, err=ENOTEMPTY) ctx.rename(d, d2) ctx.rmdir(d, err=ENOENT) ctx.rmdir(d2, err=ENOTEMPTY) ./run --ov rename-pop-dir /mnt/a/no_dir103: Expected error (Directory not empty) was not produced Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-10-26 03:34:06 -06:00
struct dentry *opaquedir = NULL;
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
int err;
ovl: check for emptiness of redirect dir Before introducing redirect_dir feature, the condition !ovl_lower_positive(dentry) for a directory, implied that it is a pure upper directory, which may be removed if empty. Now that directory can be redirect, it is possible that upper does not cover any lower (i.e. !ovl_lower_positive(dentry)), but the directory is a merge (with redirected path) and maybe non empty. Check for this case in ovl_remove_upper(). This change fixes the following test case from rename-pop-dir.py of unionmount-testsuite: """Remove dir and rename old name""" d = ctx.non_empty_dir() d2 = ctx.no_dir() ctx.rmdir(d, err=ENOTEMPTY) ctx.rename(d, d2) ctx.rmdir(d, err=ENOENT) ctx.rmdir(d2, err=ENOTEMPTY) ./run --ov rename-pop-dir /mnt/a/no_dir103: Expected error (Directory not empty) was not produced Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-10-26 03:34:06 -06:00
/* Redirect dir can be !ovl_lower_positive && OVL_TYPE_MERGE */
if (is_dir && ovl_dentry_get_redirect(dentry)) {
opaquedir = ovl_check_empty_and_clear(dentry);
err = PTR_ERR(opaquedir);
if (IS_ERR(opaquedir))
goto out;
}
wrappers for ->i_mutex access parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested}, inode_foo(inode) being mutex_foo(&inode->i_mutex). Please, use those for access to ->i_mutex; over the coming cycle ->i_mutex will become rwsem, with ->lookup() done with it held only shared. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-22 13:40:57 -07:00
inode_lock_nested(dir, I_MUTEX_PARENT);
ovl: verify upper dentry before unlink and rename Unlink and rename in overlayfs checked the upper dentry for staleness by verifying upper->d_parent against upperdir. However the dentry can go stale also by being unhashed, for example. Expand the verification to actually look up the name again (under parent lock) and check if it matches the upper dentry. This matches what the VFS does before passing the dentry to filesytem's unlink/rename methods, which excludes any inconsistency caused by overlayfs. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-03-21 10:31:44 -06:00
upper = lookup_one_len(dentry->d_name.name, upperdir,
dentry->d_name.len);
err = PTR_ERR(upper);
if (IS_ERR(upper))
goto out_unlock;
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
err = -ESTALE;
ovl: check for emptiness of redirect dir Before introducing redirect_dir feature, the condition !ovl_lower_positive(dentry) for a directory, implied that it is a pure upper directory, which may be removed if empty. Now that directory can be redirect, it is possible that upper does not cover any lower (i.e. !ovl_lower_positive(dentry)), but the directory is a merge (with redirected path) and maybe non empty. Check for this case in ovl_remove_upper(). This change fixes the following test case from rename-pop-dir.py of unionmount-testsuite: """Remove dir and rename old name""" d = ctx.non_empty_dir() d2 = ctx.no_dir() ctx.rmdir(d, err=ENOTEMPTY) ctx.rename(d, d2) ctx.rmdir(d, err=ENOENT) ctx.rmdir(d2, err=ENOTEMPTY) ./run --ov rename-pop-dir /mnt/a/no_dir103: Expected error (Directory not empty) was not produced Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-10-26 03:34:06 -06:00
if ((opaquedir && upper != opaquedir) ||
ovl: compare inodes When checking for consistency in directory operations (unlink, rename, etc.) match inodes not dentries. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-07-04 14:03:16 -06:00
(!opaquedir && !ovl_matches_upper(dentry, upper)))
ovl: check for emptiness of redirect dir Before introducing redirect_dir feature, the condition !ovl_lower_positive(dentry) for a directory, implied that it is a pure upper directory, which may be removed if empty. Now that directory can be redirect, it is possible that upper does not cover any lower (i.e. !ovl_lower_positive(dentry)), but the directory is a merge (with redirected path) and maybe non empty. Check for this case in ovl_remove_upper(). This change fixes the following test case from rename-pop-dir.py of unionmount-testsuite: """Remove dir and rename old name""" d = ctx.non_empty_dir() d2 = ctx.no_dir() ctx.rmdir(d, err=ENOTEMPTY) ctx.rename(d, d2) ctx.rmdir(d, err=ENOENT) ctx.rmdir(d2, err=ENOTEMPTY) ./run --ov rename-pop-dir /mnt/a/no_dir103: Expected error (Directory not empty) was not produced Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-10-26 03:34:06 -06:00
goto out_dput_upper;
if (is_dir)
err = vfs_rmdir(dir, upper);
else
err = vfs_unlink(dir, upper, NULL);
ovl_dentry_version_inc(dentry->d_parent);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
/*
* Keeping this dentry hashed would mean having to release
* upperpath/lowerpath, which could only be done if we are the
* sole user of this dentry. Too tricky... Just unhash for
* now.
*/
ovl: fix getcwd() failure after unsuccessful rmdir ovl_remove_upper() should do d_drop() only after it successfully removes the dir, otherwise a subsequent getcwd() system call will fail, breaking userspace programs. This is to fix: https://bugzilla.kernel.org/show_bug.cgi?id=110491 Signed-off-by: Rui Wang <rui.y.wang@intel.com> Reviewed-by: Konstantin Khlebnikov <koct9i@gmail.com> Signed-off-by: Miklos Szeredi <miklos@szeredi.hu> Cc: <stable@vger.kernel.org>
2016-01-08 08:09:59 -07:00
if (!err)
d_drop(dentry);
ovl: check for emptiness of redirect dir Before introducing redirect_dir feature, the condition !ovl_lower_positive(dentry) for a directory, implied that it is a pure upper directory, which may be removed if empty. Now that directory can be redirect, it is possible that upper does not cover any lower (i.e. !ovl_lower_positive(dentry)), but the directory is a merge (with redirected path) and maybe non empty. Check for this case in ovl_remove_upper(). This change fixes the following test case from rename-pop-dir.py of unionmount-testsuite: """Remove dir and rename old name""" d = ctx.non_empty_dir() d2 = ctx.no_dir() ctx.rmdir(d, err=ENOTEMPTY) ctx.rename(d, d2) ctx.rmdir(d, err=ENOENT) ctx.rmdir(d2, err=ENOTEMPTY) ./run --ov rename-pop-dir /mnt/a/no_dir103: Expected error (Directory not empty) was not produced Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-10-26 03:34:06 -06:00
out_dput_upper:
dput(upper);
ovl: verify upper dentry before unlink and rename Unlink and rename in overlayfs checked the upper dentry for staleness by verifying upper->d_parent against upperdir. However the dentry can go stale also by being unhashed, for example. Expand the verification to actually look up the name again (under parent lock) and check if it matches the upper dentry. This matches what the VFS does before passing the dentry to filesytem's unlink/rename methods, which excludes any inconsistency caused by overlayfs. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-03-21 10:31:44 -06:00
out_unlock:
wrappers for ->i_mutex access parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested}, inode_foo(inode) being mutex_foo(&inode->i_mutex). Please, use those for access to ->i_mutex; over the coming cycle ->i_mutex will become rwsem, with ->lookup() done with it held only shared. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-22 13:40:57 -07:00
inode_unlock(dir);
ovl: check for emptiness of redirect dir Before introducing redirect_dir feature, the condition !ovl_lower_positive(dentry) for a directory, implied that it is a pure upper directory, which may be removed if empty. Now that directory can be redirect, it is possible that upper does not cover any lower (i.e. !ovl_lower_positive(dentry)), but the directory is a merge (with redirected path) and maybe non empty. Check for this case in ovl_remove_upper(). This change fixes the following test case from rename-pop-dir.py of unionmount-testsuite: """Remove dir and rename old name""" d = ctx.non_empty_dir() d2 = ctx.no_dir() ctx.rmdir(d, err=ENOTEMPTY) ctx.rename(d, d2) ctx.rmdir(d, err=ENOENT) ctx.rmdir(d2, err=ENOTEMPTY) ./run --ov rename-pop-dir /mnt/a/no_dir103: Expected error (Directory not empty) was not produced Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-10-26 03:34:06 -06:00
dput(opaquedir);
out:
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
return err;
}
static int ovl_do_remove(struct dentry *dentry, bool is_dir)
{
enum ovl_path_type type;
int err;
ovl: do operations on underlying file system in mounter's context Given we are now doing checks both on overlay inode as well underlying inode, we should be able to do checks and operations on underlying file system using mounter's context. So modify all operations to do checks/operations on underlying dentry/inode in the context of mounter. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-01 14:34:28 -06:00
const struct cred *old_cred;
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
err = ovl_want_write(dentry);
if (err)
goto out;
err = ovl_copy_up(dentry->d_parent);
if (err)
goto out_drop_write;
type = ovl_path_type(dentry);
ovl: do operations on underlying file system in mounter's context Given we are now doing checks both on overlay inode as well underlying inode, we should be able to do checks and operations on underlying file system using mounter's context. So modify all operations to do checks/operations on underlying dentry/inode in the context of mounter. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-01 14:34:28 -06:00
old_cred = ovl_override_creds(dentry->d_sb);
ovl: check lower existence when removing Currently ovl_lookup() checks existence of lower file even if there's a non-directory on upper (which is always opaque). This is done so that remove can decide whether a whiteout is needed or not. It would be better to defer this check to unlink, since most of the time the gathered information about opaqueness will be unused. This adds a helper ovl_lower_positive() that checks if there's anything on the lower layer(s). The following patches also introduce changes to how the "opaque" attribute is updated on directories: this attribute is added when the directory is creted or moved over a whiteout or object covering something on the lower layer. However following changes will allow the attribute to remain on the directory after being moved, even if the new location doesn't cover anything. Because of this, we need to check lower layers even for opaque directories, so that whiteout is only created when necessary. This function will later be also used to decide about marking a directory opaque, so deal with negative dentries as well. When dealing with negative, it's enough to check for being a whiteout If the dentry is positive but not upper then it also obviously needs whiteout/opaque. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 03:02:55 -07:00
if (!ovl_lower_positive(dentry))
ovl: do operations on underlying file system in mounter's context Given we are now doing checks both on overlay inode as well underlying inode, we should be able to do checks and operations on underlying file system using mounter's context. So modify all operations to do checks/operations on underlying dentry/inode in the context of mounter. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-01 14:34:28 -06:00
err = ovl_remove_upper(dentry, is_dir);
else
ovl: fix remove/copy-up race ovl_remove_and_whiteout() needs to check if upper dentry exists or not after having locked upper parent directory. Previously we used a "type" value computed before locking the upper parent directory, which is susceptible to racing with copy-up. There's a similar check in ovl_check_empty_and_clear(). This one is not actually racy, since copy-up doesn't change the "emptyness" property of a directory. Add a comment to this effect, and check the existence of upper dentry locally to make the code cleaner. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-11-20 08:39:59 -07:00
err = ovl_remove_and_whiteout(dentry, is_dir);
ovl: do operations on underlying file system in mounter's context Given we are now doing checks both on overlay inode as well underlying inode, we should be able to do checks and operations on underlying file system using mounter's context. So modify all operations to do checks/operations on underlying dentry/inode in the context of mounter. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-01 14:34:28 -06:00
revert_creds(old_cred);
ovl: clear nlink on rmdir To make delete notification work on fa/inotify. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-29 04:05:24 -06:00
if (!err) {
if (is_dir)
clear_nlink(dentry->d_inode);
else
drop_nlink(dentry->d_inode);
}
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
out_drop_write:
ovl_drop_write(dentry);
out:
return err;
}
static int ovl_unlink(struct inode *dir, struct dentry *dentry)
{
return ovl_do_remove(dentry, false);
}
static int ovl_rmdir(struct inode *dir, struct dentry *dentry)
{
return ovl_do_remove(dentry, true);
}
ovl: rename: simplify handling of lower/merged directory d_is_dir() is safe to call on a negative dentry. Use this fact to simplify handling of the lower or merged directories. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 03:02:55 -07:00
static bool ovl_type_merge_or_lower(struct dentry *dentry)
{
enum ovl_path_type type = ovl_path_type(dentry);
return OVL_TYPE_MERGE(type) || !OVL_TYPE_UPPER(type);
}
ovl: redirect on rename-dir Current code returns EXDEV when a directory would need to be copied up to move. We could copy up the directory tree in this case, but there's another, simpler solution: point to old lower directory from moved upper directory. This is achieved with a "trusted.overlay.redirect" xattr storing the path relative to the root of the overlay. After such attribute has been set, the directory can be moved without further actions required. This is a backward incompatible feature, old kernels won't be able to correctly mount an overlay containing redirected directories. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 03:02:56 -07:00
static bool ovl_can_move(struct dentry *dentry)
{
return ovl_redirect_dir(dentry->d_sb) ||
!d_is_dir(dentry) || !ovl_type_merge_or_lower(dentry);
}
static char *ovl_get_redirect(struct dentry *dentry, bool samedir)
{
char *buf, *ret;
struct dentry *d, *tmp;
ovl: allow setting max size of redirect Add a module option to allow tuning the max size of absolute redirects. Default is 256. Size of relative redirects is naturally limited by the the underlying filesystem's max filename length (usually 255). Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 03:02:57 -07:00
int buflen = ovl_redirect_max + 1;
ovl: redirect on rename-dir Current code returns EXDEV when a directory would need to be copied up to move. We could copy up the directory tree in this case, but there's another, simpler solution: point to old lower directory from moved upper directory. This is achieved with a "trusted.overlay.redirect" xattr storing the path relative to the root of the overlay. After such attribute has been set, the directory can be moved without further actions required. This is a backward incompatible feature, old kernels won't be able to correctly mount an overlay containing redirected directories. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 03:02:56 -07:00
if (samedir) {
ret = kstrndup(dentry->d_name.name, dentry->d_name.len,
GFP_KERNEL);
goto out;
}
buf = ret = kmalloc(buflen, GFP_TEMPORARY);
if (!buf)
goto out;
buflen--;
buf[buflen] = '\0';
for (d = dget(dentry); !IS_ROOT(d);) {
const char *name;
int thislen;
spin_lock(&d->d_lock);
name = ovl_dentry_get_redirect(d);
if (name) {
thislen = strlen(name);
} else {
name = d->d_name.name;
thislen = d->d_name.len;
}
/* If path is too long, fall back to userspace move */
if (thislen + (name[0] != '/') > buflen) {
ret = ERR_PTR(-EXDEV);
spin_unlock(&d->d_lock);
goto out_put;
}
buflen -= thislen;
memcpy(&buf[buflen], name, thislen);
tmp = dget_dlock(d->d_parent);
spin_unlock(&d->d_lock);
dput(d);
d = tmp;
/* Absolute redirect: finished */
if (buf[buflen] == '/')
break;
buflen--;
buf[buflen] = '/';
}
ret = kstrdup(&buf[buflen], GFP_KERNEL);
out_put:
dput(d);
kfree(buf);
out:
return ret ? ret : ERR_PTR(-ENOMEM);
}
static int ovl_set_redirect(struct dentry *dentry, bool samedir)
{
int err;
const char *redirect = ovl_dentry_get_redirect(dentry);
if (redirect && (samedir || redirect[0] == '/'))
return 0;
redirect = ovl_get_redirect(dentry, samedir);
if (IS_ERR(redirect))
return PTR_ERR(redirect);
ovl: handle rename when upper doesn't support xattr On failure to set opaque/redirect xattr on rename, skip setting xattr and return -EXDEV. On failure to set opaque xattr when creating a new directory, -EIO is returned instead of -EOPNOTSUPP. Any failure to set those xattr will be recorded in super block and then setting any xattr on upper won't be attempted again. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-05-16 15:12:41 -06:00
err = ovl_check_setxattr(dentry, ovl_dentry_upper(dentry),
OVL_XATTR_REDIRECT,
redirect, strlen(redirect), -EXDEV);
ovl: redirect on rename-dir Current code returns EXDEV when a directory would need to be copied up to move. We could copy up the directory tree in this case, but there's another, simpler solution: point to old lower directory from moved upper directory. This is achieved with a "trusted.overlay.redirect" xattr storing the path relative to the root of the overlay. After such attribute has been set, the directory can be moved without further actions required. This is a backward incompatible feature, old kernels won't be able to correctly mount an overlay containing redirected directories. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 03:02:56 -07:00
if (!err) {
spin_lock(&dentry->d_lock);
ovl_dentry_set_redirect(dentry, redirect);
spin_unlock(&dentry->d_lock);
} else {
kfree(redirect);
ovl: handle rename when upper doesn't support xattr On failure to set opaque/redirect xattr on rename, skip setting xattr and return -EXDEV. On failure to set opaque xattr when creating a new directory, -EIO is returned instead of -EOPNOTSUPP. Any failure to set those xattr will be recorded in super block and then setting any xattr on upper won't be attempted again. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-05-16 15:12:41 -06:00
pr_warn_ratelimited("overlay: failed to set redirect (%i)\n", err);
ovl: redirect on rename-dir Current code returns EXDEV when a directory would need to be copied up to move. We could copy up the directory tree in this case, but there's another, simpler solution: point to old lower directory from moved upper directory. This is achieved with a "trusted.overlay.redirect" xattr storing the path relative to the root of the overlay. After such attribute has been set, the directory can be moved without further actions required. This is a backward incompatible feature, old kernels won't be able to correctly mount an overlay containing redirected directories. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 03:02:56 -07:00
/* Fall back to userspace copy-up */
err = -EXDEV;
}
return err;
}
ovl: rename ovl_rename2() to ovl_rename() Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 03:02:55 -07:00
static int ovl_rename(struct inode *olddir, struct dentry *old,
struct inode *newdir, struct dentry *new,
unsigned int flags)
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
{
int err;
struct dentry *old_upperdir;
struct dentry *new_upperdir;
struct dentry *olddentry;
struct dentry *newdentry;
struct dentry *trap;
bool old_opaque;
bool new_opaque;
bool cleanup_whiteout = false;
bool overwrite = !(flags & RENAME_EXCHANGE);
VFS: (Scripted) Convert S_ISLNK/DIR/REG(dentry->d_inode) to d_is_*(dentry) Convert the following where appropriate: (1) S_ISLNK(dentry->d_inode) to d_is_symlink(dentry). (2) S_ISREG(dentry->d_inode) to d_is_reg(dentry). (3) S_ISDIR(dentry->d_inode) to d_is_dir(dentry). This is actually more complicated than it appears as some calls should be converted to d_can_lookup() instead. The difference is whether the directory in question is a real dir with a ->lookup op or whether it's a fake dir with a ->d_automount op. In some circumstances, we can subsume checks for dentry->d_inode not being NULL into this, provided we the code isn't in a filesystem that expects d_inode to be NULL if the dirent really *is* negative (ie. if we're going to use d_inode() rather than d_backing_inode() to get the inode pointer). Note that the dentry type field may be set to something other than DCACHE_MISS_TYPE when d_inode is NULL in the case of unionmount, where the VFS manages the fall-through from a negative dentry to a lower layer. In such a case, the dentry type of the negative union dentry is set to the same as the type of the lower dentry. However, if you know d_inode is not NULL at the call site, then you can use the d_is_xxx() functions even in a filesystem. There is one further complication: a 0,0 chardev dentry may be labelled DCACHE_WHITEOUT_TYPE rather than DCACHE_SPECIAL_TYPE. Strictly, this was intended for special directory entry types that don't have attached inodes. The following perl+coccinelle script was used: use strict; my @callers; open($fd, 'git grep -l \'S_IS[A-Z].*->d_inode\' |') || die "Can't grep for S_ISDIR and co. callers"; @callers = <$fd>; close($fd); unless (@callers) { print "No matches\n"; exit(0); } my @cocci = ( '@@', 'expression E;', '@@', '', '- S_ISLNK(E->d_inode->i_mode)', '+ d_is_symlink(E)', '', '@@', 'expression E;', '@@', '', '- S_ISDIR(E->d_inode->i_mode)', '+ d_is_dir(E)', '', '@@', 'expression E;', '@@', '', '- S_ISREG(E->d_inode->i_mode)', '+ d_is_reg(E)' ); my $coccifile = "tmp.sp.cocci"; open($fd, ">$coccifile") || die $coccifile; print($fd "$_\n") || die $coccifile foreach (@cocci); close($fd); foreach my $file (@callers) { chomp $file; print "Processing ", $file, "\n"; system("spatch", "--sp-file", $coccifile, $file, "--in-place", "--no-show-diff") == 0 || die "spatch failed"; } [AV: overlayfs parts skipped] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-01-29 05:02:35 -07:00
bool is_dir = d_is_dir(old);
ovl: rename: simplify handling of lower/merged directory d_is_dir() is safe to call on a negative dentry. Use this fact to simplify handling of the lower or merged directories. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 03:02:55 -07:00
bool new_is_dir = d_is_dir(new);
ovl: redirect on rename-dir Current code returns EXDEV when a directory would need to be copied up to move. We could copy up the directory tree in this case, but there's another, simpler solution: point to old lower directory from moved upper directory. This is achieved with a "trusted.overlay.redirect" xattr storing the path relative to the root of the overlay. After such attribute has been set, the directory can be moved without further actions required. This is a backward incompatible feature, old kernels won't be able to correctly mount an overlay containing redirected directories. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 03:02:56 -07:00
bool samedir = olddir == newdir;
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
struct dentry *opaquedir = NULL;
const struct cred *old_cred = NULL;
err = -EINVAL;
if (flags & ~(RENAME_EXCHANGE | RENAME_NOREPLACE))
goto out;
flags &= ~RENAME_NOREPLACE;
/* Don't copy up directory trees */
err = -EXDEV;
ovl: redirect on rename-dir Current code returns EXDEV when a directory would need to be copied up to move. We could copy up the directory tree in this case, but there's another, simpler solution: point to old lower directory from moved upper directory. This is achieved with a "trusted.overlay.redirect" xattr storing the path relative to the root of the overlay. After such attribute has been set, the directory can be moved without further actions required. This is a backward incompatible feature, old kernels won't be able to correctly mount an overlay containing redirected directories. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 03:02:56 -07:00
if (!ovl_can_move(old))
ovl: rename: simplify handling of lower/merged directory d_is_dir() is safe to call on a negative dentry. Use this fact to simplify handling of the lower or merged directories. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 03:02:55 -07:00
goto out;
ovl: redirect on rename-dir Current code returns EXDEV when a directory would need to be copied up to move. We could copy up the directory tree in this case, but there's another, simpler solution: point to old lower directory from moved upper directory. This is achieved with a "trusted.overlay.redirect" xattr storing the path relative to the root of the overlay. After such attribute has been set, the directory can be moved without further actions required. This is a backward incompatible feature, old kernels won't be able to correctly mount an overlay containing redirected directories. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 03:02:56 -07:00
if (!overwrite && !ovl_can_move(new))
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
goto out;
err = ovl_want_write(old);
if (err)
goto out;
err = ovl_copy_up(old);
if (err)
goto out_drop_write;
err = ovl_copy_up(new->d_parent);
if (err)
goto out_drop_write;
if (!overwrite) {
err = ovl_copy_up(new);
if (err)
goto out_drop_write;
}
ovl: do operations on underlying file system in mounter's context Given we are now doing checks both on overlay inode as well underlying inode, we should be able to do checks and operations on underlying file system using mounter's context. So modify all operations to do checks/operations on underlying dentry/inode in the context of mounter. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-01 14:34:28 -06:00
old_cred = ovl_override_creds(old->d_sb);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
ovl: rename: simplify handling of lower/merged directory d_is_dir() is safe to call on a negative dentry. Use this fact to simplify handling of the lower or merged directories. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 03:02:55 -07:00
if (overwrite && new_is_dir && ovl_type_merge_or_lower(new)) {
ovl: fix remove/copy-up race ovl_remove_and_whiteout() needs to check if upper dentry exists or not after having locked upper parent directory. Previously we used a "type" value computed before locking the upper parent directory, which is susceptible to racing with copy-up. There's a similar check in ovl_check_empty_and_clear(). This one is not actually racy, since copy-up doesn't change the "emptyness" property of a directory. Add a comment to this effect, and check the existence of upper dentry locally to make the code cleaner. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-11-20 08:39:59 -07:00
opaquedir = ovl_check_empty_and_clear(new);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
err = PTR_ERR(opaquedir);
if (IS_ERR(opaquedir)) {
opaquedir = NULL;
goto out_revert_creds;
}
}
if (overwrite) {
ovl: check lower existence when removing Currently ovl_lookup() checks existence of lower file even if there's a non-directory on upper (which is always opaque). This is done so that remove can decide whether a whiteout is needed or not. It would be better to defer this check to unlink, since most of the time the gathered information about opaqueness will be unused. This adds a helper ovl_lower_positive() that checks if there's anything on the lower layer(s). The following patches also introduce changes to how the "opaque" attribute is updated on directories: this attribute is added when the directory is creted or moved over a whiteout or object covering something on the lower layer. However following changes will allow the attribute to remain on the directory after being moved, even if the new location doesn't cover anything. Because of this, we need to check lower layers even for opaque directories, so that whiteout is only created when necessary. This function will later be also used to decide about marking a directory opaque, so deal with negative dentries as well. When dealing with negative, it's enough to check for being a whiteout If the dentry is positive but not upper then it also obviously needs whiteout/opaque. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 03:02:55 -07:00
if (ovl_lower_positive(old)) {
ovl: add ovl_dentry_is_whiteout() And use it instead of ovl_dentry_is_opaque() where appropriate. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 03:02:55 -07:00
if (!ovl_dentry_is_whiteout(new)) {
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
/* Whiteout source */
flags |= RENAME_WHITEOUT;
} else {
/* Switch whiteouts */
flags |= RENAME_EXCHANGE;
}
ovl: add ovl_dentry_is_whiteout() And use it instead of ovl_dentry_is_opaque() where appropriate. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 03:02:55 -07:00
} else if (is_dir && ovl_dentry_is_whiteout(new)) {
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
flags |= RENAME_EXCHANGE;
cleanup_whiteout = true;
}
}
old_upperdir = ovl_dentry_upper(old->d_parent);
new_upperdir = ovl_dentry_upper(new->d_parent);
ovl: mark upper dir with type origin entries "impure" When moving a merge dir or non-dir with copy up origin into a non-merge upper dir (a.k.a pure upper dir), we are marking the target parent dir "impure". ovl_iterate() iterates pure upper dirs directly, because there is no need to filter out whiteouts and merge dir content with lower dir. But for the case of an "impure" upper dir, ovl_iterate() will not be able to iterate the real upper dir directly, because it will need to lookup the origin inode and use it to fill d_ino. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-05-11 07:42:26 -06:00
if (!samedir) {
/*
* When moving a merge dir or non-dir with copy up origin into
ovl: mark upper merge dir with type origin entries "impure" An upper dir is marked "impure" to let ovl_iterate() know that this directory may contain non pure upper entries whose d_ino may need to be read from the origin inode. We already mark a non-merge dir "impure" when moving a non-pure child entry inside it, to let ovl_iterate() know not to iterate the non-merge dir directly. Mark also a merge dir "impure" when moving a non-pure child entry inside it and when copying up a child entry inside it. This can be used to optimize ovl_iterate() to perform a "pure merge" of upper and lower directories, merging the content of the directories, without having to read d_ino from origin inodes. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-05-24 06:29:33 -06:00
* a new parent, we are marking the new parent dir "impure".
* When ovl_iterate() iterates an "impure" upper dir, it will
* lookup the origin inodes of the entries to fill d_ino.
ovl: mark upper dir with type origin entries "impure" When moving a merge dir or non-dir with copy up origin into a non-merge upper dir (a.k.a pure upper dir), we are marking the target parent dir "impure". ovl_iterate() iterates pure upper dirs directly, because there is no need to filter out whiteouts and merge dir content with lower dir. But for the case of an "impure" upper dir, ovl_iterate() will not be able to iterate the real upper dir directly, because it will need to lookup the origin inode and use it to fill d_ino. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-05-11 07:42:26 -06:00
*/
ovl: mark upper merge dir with type origin entries "impure" An upper dir is marked "impure" to let ovl_iterate() know that this directory may contain non pure upper entries whose d_ino may need to be read from the origin inode. We already mark a non-merge dir "impure" when moving a non-pure child entry inside it, to let ovl_iterate() know not to iterate the non-merge dir directly. Mark also a merge dir "impure" when moving a non-pure child entry inside it and when copying up a child entry inside it. This can be used to optimize ovl_iterate() to perform a "pure merge" of upper and lower directories, merging the content of the directories, without having to read d_ino from origin inodes. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-05-24 06:29:33 -06:00
if (ovl_type_origin(old)) {
ovl: mark upper dir with type origin entries "impure" When moving a merge dir or non-dir with copy up origin into a non-merge upper dir (a.k.a pure upper dir), we are marking the target parent dir "impure". ovl_iterate() iterates pure upper dirs directly, because there is no need to filter out whiteouts and merge dir content with lower dir. But for the case of an "impure" upper dir, ovl_iterate() will not be able to iterate the real upper dir directly, because it will need to lookup the origin inode and use it to fill d_ino. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-05-11 07:42:26 -06:00
err = ovl_set_impure(new->d_parent, new_upperdir);
if (err)
goto out_revert_creds;
}
ovl: mark upper merge dir with type origin entries "impure" An upper dir is marked "impure" to let ovl_iterate() know that this directory may contain non pure upper entries whose d_ino may need to be read from the origin inode. We already mark a non-merge dir "impure" when moving a non-pure child entry inside it, to let ovl_iterate() know not to iterate the non-merge dir directly. Mark also a merge dir "impure" when moving a non-pure child entry inside it and when copying up a child entry inside it. This can be used to optimize ovl_iterate() to perform a "pure merge" of upper and lower directories, merging the content of the directories, without having to read d_ino from origin inodes. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-05-24 06:29:33 -06:00
if (!overwrite && ovl_type_origin(new)) {
ovl: mark upper dir with type origin entries "impure" When moving a merge dir or non-dir with copy up origin into a non-merge upper dir (a.k.a pure upper dir), we are marking the target parent dir "impure". ovl_iterate() iterates pure upper dirs directly, because there is no need to filter out whiteouts and merge dir content with lower dir. But for the case of an "impure" upper dir, ovl_iterate() will not be able to iterate the real upper dir directly, because it will need to lookup the origin inode and use it to fill d_ino. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-05-11 07:42:26 -06:00
err = ovl_set_impure(old->d_parent, old_upperdir);
if (err)
goto out_revert_creds;
}
}
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
trap = lock_rename(new_upperdir, old_upperdir);
ovl: verify upper dentry before unlink and rename Unlink and rename in overlayfs checked the upper dentry for staleness by verifying upper->d_parent against upperdir. However the dentry can go stale also by being unhashed, for example. Expand the verification to actually look up the name again (under parent lock) and check if it matches the upper dentry. This matches what the VFS does before passing the dentry to filesytem's unlink/rename methods, which excludes any inconsistency caused by overlayfs. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-03-21 10:31:44 -06:00
olddentry = lookup_one_len(old->d_name.name, old_upperdir,
old->d_name.len);
err = PTR_ERR(olddentry);
if (IS_ERR(olddentry))
goto out_unlock;
err = -ESTALE;
ovl: compare inodes When checking for consistency in directory operations (unlink, rename, etc.) match inodes not dentries. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-07-04 14:03:16 -06:00
if (!ovl_matches_upper(old, olddentry))
ovl: verify upper dentry before unlink and rename Unlink and rename in overlayfs checked the upper dentry for staleness by verifying upper->d_parent against upperdir. However the dentry can go stale also by being unhashed, for example. Expand the verification to actually look up the name again (under parent lock) and check if it matches the upper dentry. This matches what the VFS does before passing the dentry to filesytem's unlink/rename methods, which excludes any inconsistency caused by overlayfs. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-03-21 10:31:44 -06:00
goto out_dput_old;
newdentry = lookup_one_len(new->d_name.name, new_upperdir,
new->d_name.len);
err = PTR_ERR(newdentry);
if (IS_ERR(newdentry))
goto out_dput_old;
ovl: check lower existence of rename target Check if something exists on the lower layer(s) under the target or rename to decide if directory needs to be marked "opaque". Marking opaque is done before the rename, and on failure the marking was undone. Also the opaque xattr was removed if the target didn't cover anything. This patch changes behavior so that removal of "opaque" is not done in either of the above cases. This means that directory may have the opaque flag even if it doesn't cover anything. However this shouldn't affect the performance or semantics of the overalay, while simplifying the code. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 03:02:55 -07:00
old_opaque = ovl_dentry_is_opaque(old);
new_opaque = ovl_dentry_is_opaque(new);
ovl: verify upper dentry before unlink and rename Unlink and rename in overlayfs checked the upper dentry for staleness by verifying upper->d_parent against upperdir. However the dentry can go stale also by being unhashed, for example. Expand the verification to actually look up the name again (under parent lock) and check if it matches the upper dentry. This matches what the VFS does before passing the dentry to filesytem's unlink/rename methods, which excludes any inconsistency caused by overlayfs. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-03-21 10:31:44 -06:00
err = -ESTALE;
ovl: move __upperdentry to ovl_inode Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-07-04 14:03:16 -06:00
if (d_inode(new) && ovl_dentry_upper(new)) {
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
if (opaquedir) {
ovl: verify upper dentry before unlink and rename Unlink and rename in overlayfs checked the upper dentry for staleness by verifying upper->d_parent against upperdir. However the dentry can go stale also by being unhashed, for example. Expand the verification to actually look up the name again (under parent lock) and check if it matches the upper dentry. This matches what the VFS does before passing the dentry to filesytem's unlink/rename methods, which excludes any inconsistency caused by overlayfs. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-03-21 10:31:44 -06:00
if (newdentry != opaquedir)
goto out_dput;
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
} else {
ovl: compare inodes When checking for consistency in directory operations (unlink, rename, etc.) match inodes not dentries. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-07-04 14:03:16 -06:00
if (!ovl_matches_upper(new, newdentry))
ovl: verify upper dentry before unlink and rename Unlink and rename in overlayfs checked the upper dentry for staleness by verifying upper->d_parent against upperdir. However the dentry can go stale also by being unhashed, for example. Expand the verification to actually look up the name again (under parent lock) and check if it matches the upper dentry. This matches what the VFS does before passing the dentry to filesytem's unlink/rename methods, which excludes any inconsistency caused by overlayfs. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-03-21 10:31:44 -06:00
goto out_dput;
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
}
} else {
ovl: verify upper dentry before unlink and rename Unlink and rename in overlayfs checked the upper dentry for staleness by verifying upper->d_parent against upperdir. However the dentry can go stale also by being unhashed, for example. Expand the verification to actually look up the name again (under parent lock) and check if it matches the upper dentry. This matches what the VFS does before passing the dentry to filesytem's unlink/rename methods, which excludes any inconsistency caused by overlayfs. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-03-21 10:31:44 -06:00
if (!d_is_negative(newdentry) &&
(!new_opaque || !ovl_is_whiteout(newdentry)))
goto out_dput;
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
}
if (olddentry == trap)
goto out_dput;
if (newdentry == trap)
goto out_dput;
ovl: don't check rename to self This is redundant, the vfs already performed this check (and was broken, see commit 9409e22acdfc ("vfs: rename: check backing inode being equal")). Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 03:02:55 -07:00
if (WARN_ON(olddentry->d_inode == newdentry->d_inode))
goto out_dput;
ovl: opaque cleanup oe->opaque is set for a) whiteouts b) directories having the "trusted.overlay.opaque" xattr Case b can be simplified, since setting the xattr always implies setting oe->opaque. Also once set, the opaque flag is never cleared. Don't need to set opaque flag for non-directories. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 03:02:57 -07:00
err = 0;
ovl: redirect on rename-dir Current code returns EXDEV when a directory would need to be copied up to move. We could copy up the directory tree in this case, but there's another, simpler solution: point to old lower directory from moved upper directory. This is achieved with a "trusted.overlay.redirect" xattr storing the path relative to the root of the overlay. After such attribute has been set, the directory can be moved without further actions required. This is a backward incompatible feature, old kernels won't be able to correctly mount an overlay containing redirected directories. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 03:02:56 -07:00
if (is_dir) {
ovl: opaque cleanup oe->opaque is set for a) whiteouts b) directories having the "trusted.overlay.opaque" xattr Case b can be simplified, since setting the xattr always implies setting oe->opaque. Also once set, the opaque flag is never cleared. Don't need to set opaque flag for non-directories. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 03:02:57 -07:00
if (ovl_type_merge_or_lower(old))
ovl: redirect on rename-dir Current code returns EXDEV when a directory would need to be copied up to move. We could copy up the directory tree in this case, but there's another, simpler solution: point to old lower directory from moved upper directory. This is achieved with a "trusted.overlay.redirect" xattr storing the path relative to the root of the overlay. After such attribute has been set, the directory can be moved without further actions required. This is a backward incompatible feature, old kernels won't be able to correctly mount an overlay containing redirected directories. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 03:02:56 -07:00
err = ovl_set_redirect(old, samedir);
ovl: create directories inside merged parent opaque The benefit of making directories opaque on creation is that lookups can stop short when they reach the original created directory, instead of continue lookup the entire depth of parent directory stack. The best case is overlay with N layers, performing lookup for first level directory, which exists only in upper. In that case, there will be only one lookup instead of N. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-11-21 09:57:34 -07:00
else if (!old_opaque && ovl_type_merge(new->d_parent))
ovl: handle rename when upper doesn't support xattr On failure to set opaque/redirect xattr on rename, skip setting xattr and return -EXDEV. On failure to set opaque xattr when creating a new directory, -EIO is returned instead of -EOPNOTSUPP. Any failure to set those xattr will be recorded in super block and then setting any xattr on upper won't be attempted again. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-05-16 15:12:41 -06:00
err = ovl_set_opaque_xerr(old, olddentry, -EXDEV);
ovl: opaque cleanup oe->opaque is set for a) whiteouts b) directories having the "trusted.overlay.opaque" xattr Case b can be simplified, since setting the xattr always implies setting oe->opaque. Also once set, the opaque flag is never cleared. Don't need to set opaque flag for non-directories. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 03:02:57 -07:00
if (err)
goto out_dput;
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
}
ovl: redirect on rename-dir Current code returns EXDEV when a directory would need to be copied up to move. We could copy up the directory tree in this case, but there's another, simpler solution: point to old lower directory from moved upper directory. This is achieved with a "trusted.overlay.redirect" xattr storing the path relative to the root of the overlay. After such attribute has been set, the directory can be moved without further actions required. This is a backward incompatible feature, old kernels won't be able to correctly mount an overlay containing redirected directories. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 03:02:56 -07:00
if (!overwrite && new_is_dir) {
ovl: opaque cleanup oe->opaque is set for a) whiteouts b) directories having the "trusted.overlay.opaque" xattr Case b can be simplified, since setting the xattr always implies setting oe->opaque. Also once set, the opaque flag is never cleared. Don't need to set opaque flag for non-directories. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 03:02:57 -07:00
if (ovl_type_merge_or_lower(new))
ovl: redirect on rename-dir Current code returns EXDEV when a directory would need to be copied up to move. We could copy up the directory tree in this case, but there's another, simpler solution: point to old lower directory from moved upper directory. This is achieved with a "trusted.overlay.redirect" xattr storing the path relative to the root of the overlay. After such attribute has been set, the directory can be moved without further actions required. This is a backward incompatible feature, old kernels won't be able to correctly mount an overlay containing redirected directories. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 03:02:56 -07:00
err = ovl_set_redirect(new, samedir);
ovl: create directories inside merged parent opaque The benefit of making directories opaque on creation is that lookups can stop short when they reach the original created directory, instead of continue lookup the entire depth of parent directory stack. The best case is overlay with N layers, performing lookup for first level directory, which exists only in upper. In that case, there will be only one lookup instead of N. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-11-21 09:57:34 -07:00
else if (!new_opaque && ovl_type_merge(old->d_parent))
ovl: handle rename when upper doesn't support xattr On failure to set opaque/redirect xattr on rename, skip setting xattr and return -EXDEV. On failure to set opaque xattr when creating a new directory, -EIO is returned instead of -EOPNOTSUPP. Any failure to set those xattr will be recorded in super block and then setting any xattr on upper won't be attempted again. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-05-16 15:12:41 -06:00
err = ovl_set_opaque_xerr(new, newdentry, -EXDEV);
ovl: opaque cleanup oe->opaque is set for a) whiteouts b) directories having the "trusted.overlay.opaque" xattr Case b can be simplified, since setting the xattr always implies setting oe->opaque. Also once set, the opaque flag is never cleared. Don't need to set opaque flag for non-directories. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 03:02:57 -07:00
if (err)
goto out_dput;
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
}
ovl: check lower existence of rename target Check if something exists on the lower layer(s) under the target or rename to decide if directory needs to be marked "opaque". Marking opaque is done before the rename, and on failure the marking was undone. Also the opaque xattr was removed if the target didn't cover anything. This patch changes behavior so that removal of "opaque" is not done in either of the above cases. This means that directory may have the opaque flag even if it doesn't cover anything. However this shouldn't affect the performance or semantics of the overalay, while simplifying the code. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 03:02:55 -07:00
err = ovl_do_rename(old_upperdir->d_inode, olddentry,
new_upperdir->d_inode, newdentry, flags);
if (err)
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
goto out_dput;
if (cleanup_whiteout)
ovl_cleanup(old_upperdir->d_inode, newdentry);
ovl: fix nlink leak in ovl_rename() This patch fixes an overlay inode nlink leak in the case where ovl_rename() renames over a non-dir. This is not so critical, because overlay inode doesn't rely on nlink dropping to zero for inode deletion. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-06-05 13:44:49 -06:00
if (overwrite && d_inode(new)) {
if (new_is_dir)
clear_nlink(d_inode(new));
else
drop_nlink(d_inode(new));
}
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
ovl_dentry_version_inc(old->d_parent);
ovl_dentry_version_inc(new->d_parent);
out_dput:
dput(newdentry);
ovl: verify upper dentry before unlink and rename Unlink and rename in overlayfs checked the upper dentry for staleness by verifying upper->d_parent against upperdir. However the dentry can go stale also by being unhashed, for example. Expand the verification to actually look up the name again (under parent lock) and check if it matches the upper dentry. This matches what the VFS does before passing the dentry to filesytem's unlink/rename methods, which excludes any inconsistency caused by overlayfs. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-03-21 10:31:44 -06:00
out_dput_old:
dput(olddentry);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
out_unlock:
unlock_rename(new_upperdir, old_upperdir);
out_revert_creds:
ovl: do operations on underlying file system in mounter's context Given we are now doing checks both on overlay inode as well underlying inode, we should be able to do checks and operations on underlying file system using mounter's context. So modify all operations to do checks/operations on underlying dentry/inode in the context of mounter. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-01 14:34:28 -06:00
revert_creds(old_cred);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
out_drop_write:
ovl_drop_write(old);
out:
dput(opaquedir);
return err;
}
const struct inode_operations ovl_dir_inode_operations = {
.lookup = ovl_lookup,
.mkdir = ovl_mkdir,
.symlink = ovl_symlink,
.unlink = ovl_unlink,
.rmdir = ovl_rmdir,
ovl: rename ovl_rename2() to ovl_rename() Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 03:02:55 -07:00
.rename = ovl_rename,
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
.link = ovl_link,
.setattr = ovl_setattr,
.create = ovl_create,
.mknod = ovl_mknod,
.permission = ovl_permission,
ovl: merge getattr for dir and nondir Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-05-05 03:38:58 -06:00
.getattr = ovl_getattr,
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
.listxattr = ovl_listxattr,
ovl: define ->get_acl() for overlay inodes Now we are planning to do DAC permission checks on overlay inode itself. And to make it work, we will need to make sure we can get acls from underlying inode. So define ->get_acl() for overlay inodes and this in turn calls into underlying filesystem to get acls, if any. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-01 14:34:26 -06:00
.get_acl = ovl_get_acl,
ovl: update atime on upper Fix atime update logic in overlayfs. This patch adds an i_op->update_time() handler to overlayfs inodes. This forwards atime updates to the upper layer only. No atime updates are done on lower layers. Remove implicit atime updates to underlying files and directories with O_NOATIME. Remove explicit atime update in ovl_readlink(). Clear atime related mnt flags from cloned upper mount. This means atime updates are controlled purely by overlayfs mount options. Reported-by: Konstantin Khlebnikov <koct9i@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-29 04:05:23 -06:00
.update_time = ovl_update_time,
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
};