2005-05-24 18:34:51 -06:00
|
|
|
/*
|
|
|
|
* tps65010 - driver for tps6501x power management chips
|
|
|
|
*
|
|
|
|
* Copyright (C) 2004 Texas Instruments
|
|
|
|
* Copyright (C) 2004-2005 David Brownell
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License as published by
|
|
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
|
|
* (at your option) any later version.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
*
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
* along with this program; if not, write to the Free Software
|
|
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/config.h>
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/interrupt.h>
|
|
|
|
#include <linux/device.h>
|
|
|
|
#include <linux/i2c.h>
|
|
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/workqueue.h>
|
|
|
|
#include <linux/suspend.h>
|
|
|
|
#include <linux/debugfs.h>
|
|
|
|
#include <linux/seq_file.h>
|
|
|
|
|
|
|
|
#include <asm/irq.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
|
|
|
|
|
|
#include <asm/arch/gpio.h>
|
|
|
|
#include <asm/arch/mux.h>
|
|
|
|
#include <asm/arch/tps65010.h>
|
|
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
|
|
|
|
#define DRIVER_VERSION "2 May 2005"
|
|
|
|
#define DRIVER_NAME (tps65010_driver.name)
|
|
|
|
|
|
|
|
MODULE_DESCRIPTION("TPS6501x Power Management Driver");
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
|
2005-06-29 08:13:00 -06:00
|
|
|
static unsigned short normal_i2c[] = { 0x48, /* 0x49, */ I2C_CLIENT_END };
|
2005-05-24 18:34:51 -06:00
|
|
|
static unsigned short normal_i2c_range[] = { I2C_CLIENT_END };
|
|
|
|
|
|
|
|
I2C_CLIENT_INSMOD;
|
|
|
|
|
|
|
|
static struct i2c_driver tps65010_driver;
|
|
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
|
|
|
|
/* This driver handles a family of multipurpose chips, which incorporate
|
|
|
|
* voltage regulators, lithium ion/polymer battery charging, GPIOs, LEDs,
|
|
|
|
* and other features often needed in portable devices like cell phones
|
|
|
|
* or digital cameras.
|
|
|
|
*
|
|
|
|
* The tps65011 and tps65013 have different voltage settings compared
|
|
|
|
* to tps65010 and tps65012. The tps65013 has a NO_CHG status/irq.
|
|
|
|
* All except tps65010 have "wait" mode, possibly defaulted so that
|
|
|
|
* battery-insert != device-on.
|
|
|
|
*
|
|
|
|
* We could distinguish between some models by checking VDCDC1.UVLO or
|
|
|
|
* other registers, unless they've been changed already after powerup
|
|
|
|
* as part of board setup by a bootloader.
|
|
|
|
*/
|
|
|
|
enum tps_model {
|
|
|
|
TPS_UNKNOWN = 0,
|
|
|
|
TPS65010,
|
|
|
|
TPS65011,
|
|
|
|
TPS65012,
|
|
|
|
TPS65013,
|
|
|
|
};
|
|
|
|
|
|
|
|
struct tps65010 {
|
|
|
|
struct i2c_client client;
|
|
|
|
struct semaphore lock;
|
|
|
|
int irq;
|
|
|
|
struct work_struct work;
|
|
|
|
struct dentry *file;
|
|
|
|
unsigned charging:1;
|
|
|
|
unsigned por:1;
|
|
|
|
unsigned model:8;
|
|
|
|
u16 vbus;
|
|
|
|
unsigned long flags;
|
|
|
|
#define FLAG_VBUS_CHANGED 0
|
|
|
|
#define FLAG_IRQ_ENABLE 1
|
|
|
|
|
|
|
|
/* copies of last register state */
|
|
|
|
u8 chgstatus, regstatus, chgconf;
|
|
|
|
u8 nmask1, nmask2;
|
|
|
|
|
2005-06-29 08:13:00 -06:00
|
|
|
/* not currently tracking GPIO state */
|
2005-05-24 18:34:51 -06:00
|
|
|
};
|
|
|
|
|
|
|
|
#define POWER_POLL_DELAY msecs_to_jiffies(800)
|
|
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
|
|
|
|
#if defined(DEBUG) || defined(CONFIG_DEBUG_FS)
|
|
|
|
|
|
|
|
static void dbg_chgstat(char *buf, size_t len, u8 chgstatus)
|
|
|
|
{
|
|
|
|
snprintf(buf, len, "%02x%s%s%s%s%s%s%s%s\n",
|
|
|
|
chgstatus,
|
|
|
|
(chgstatus & TPS_CHG_USB) ? " USB" : "",
|
|
|
|
(chgstatus & TPS_CHG_AC) ? " AC" : "",
|
|
|
|
(chgstatus & TPS_CHG_THERM) ? " therm" : "",
|
|
|
|
(chgstatus & TPS_CHG_TERM) ? " done" :
|
|
|
|
((chgstatus & (TPS_CHG_USB|TPS_CHG_AC))
|
|
|
|
? " (charging)" : ""),
|
|
|
|
(chgstatus & TPS_CHG_TAPER_TMO) ? " taper_tmo" : "",
|
|
|
|
(chgstatus & TPS_CHG_CHG_TMO) ? " charge_tmo" : "",
|
|
|
|
(chgstatus & TPS_CHG_PRECHG_TMO) ? " prechg_tmo" : "",
|
|
|
|
(chgstatus & TPS_CHG_TEMP_ERR) ? " temp_err" : "");
|
|
|
|
}
|
|
|
|
|
|
|
|
static void dbg_regstat(char *buf, size_t len, u8 regstatus)
|
|
|
|
{
|
|
|
|
snprintf(buf, len, "%02x %s%s%s%s%s%s%s%s\n",
|
|
|
|
regstatus,
|
|
|
|
(regstatus & TPS_REG_ONOFF) ? "off" : "(on)",
|
|
|
|
(regstatus & TPS_REG_COVER) ? " uncover" : "",
|
|
|
|
(regstatus & TPS_REG_UVLO) ? " UVLO" : "",
|
|
|
|
(regstatus & TPS_REG_NO_CHG) ? " NO_CHG" : "",
|
2005-06-29 08:13:00 -06:00
|
|
|
(regstatus & TPS_REG_PG_LD02) ? " ld02_bad" : "",
|
2005-05-24 18:34:51 -06:00
|
|
|
(regstatus & TPS_REG_PG_LD01) ? " ld01_bad" : "",
|
|
|
|
(regstatus & TPS_REG_PG_MAIN) ? " main_bad" : "",
|
|
|
|
(regstatus & TPS_REG_PG_CORE) ? " core_bad" : "");
|
|
|
|
}
|
|
|
|
|
|
|
|
static void dbg_chgconf(int por, char *buf, size_t len, u8 chgconfig)
|
|
|
|
{
|
2005-06-29 08:13:00 -06:00
|
|
|
const char *hibit;
|
2005-05-24 18:34:51 -06:00
|
|
|
|
|
|
|
if (por)
|
|
|
|
hibit = (chgconfig & TPS_CHARGE_POR)
|
|
|
|
? "POR=69ms" : "POR=1sec";
|
|
|
|
else
|
|
|
|
hibit = (chgconfig & TPS65013_AUA) ? "AUA" : "";
|
|
|
|
|
|
|
|
snprintf(buf, len, "%02x %s%s%s AC=%d%% USB=%dmA %sCharge\n",
|
|
|
|
chgconfig, hibit,
|
|
|
|
(chgconfig & TPS_CHARGE_RESET) ? " reset" : "",
|
|
|
|
(chgconfig & TPS_CHARGE_FAST) ? " fast" : "",
|
|
|
|
({int p; switch ((chgconfig >> 3) & 3) {
|
|
|
|
case 3: p = 100; break;
|
|
|
|
case 2: p = 75; break;
|
|
|
|
case 1: p = 50; break;
|
|
|
|
default: p = 25; break;
|
|
|
|
}; p; }),
|
|
|
|
(chgconfig & TPS_VBUS_CHARGING)
|
|
|
|
? ((chgconfig & TPS_VBUS_500MA) ? 500 : 100)
|
|
|
|
: 0,
|
|
|
|
(chgconfig & TPS_CHARGE_ENABLE) ? "" : "No");
|
|
|
|
}
|
|
|
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#ifdef DEBUG
|
|
|
|
|
|
|
|
static void show_chgstatus(const char *label, u8 chgstatus)
|
|
|
|
{
|
|
|
|
char buf [100];
|
|
|
|
|
|
|
|
dbg_chgstat(buf, sizeof buf, chgstatus);
|
|
|
|
pr_debug("%s: %s %s", DRIVER_NAME, label, buf);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void show_regstatus(const char *label, u8 regstatus)
|
|
|
|
{
|
|
|
|
char buf [100];
|
|
|
|
|
|
|
|
dbg_regstat(buf, sizeof buf, regstatus);
|
|
|
|
pr_debug("%s: %s %s", DRIVER_NAME, label, buf);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void show_chgconfig(int por, const char *label, u8 chgconfig)
|
|
|
|
{
|
|
|
|
char buf [100];
|
|
|
|
|
|
|
|
dbg_chgconf(por, buf, sizeof buf, chgconfig);
|
|
|
|
pr_debug("%s: %s %s", DRIVER_NAME, label, buf);
|
|
|
|
}
|
|
|
|
|
|
|
|
#else
|
|
|
|
|
|
|
|
static inline void show_chgstatus(const char *label, u8 chgstatus) { }
|
|
|
|
static inline void show_regstatus(const char *label, u8 chgstatus) { }
|
|
|
|
static inline void show_chgconfig(int por, const char *label, u8 chgconfig) { }
|
|
|
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#ifdef CONFIG_DEBUG_FS
|
|
|
|
|
|
|
|
static int dbg_show(struct seq_file *s, void *_)
|
|
|
|
{
|
|
|
|
struct tps65010 *tps = s->private;
|
|
|
|
u8 value, v2;
|
|
|
|
unsigned i;
|
|
|
|
char buf[100];
|
|
|
|
const char *chip;
|
|
|
|
|
|
|
|
switch (tps->model) {
|
|
|
|
case TPS65010: chip = "tps65010"; break;
|
|
|
|
case TPS65011: chip = "tps65011"; break;
|
|
|
|
case TPS65012: chip = "tps65012"; break;
|
|
|
|
case TPS65013: chip = "tps65013"; break;
|
|
|
|
default: chip = NULL; break;
|
|
|
|
}
|
|
|
|
seq_printf(s, "driver %s\nversion %s\nchip %s\n\n",
|
|
|
|
DRIVER_NAME, DRIVER_VERSION, chip);
|
|
|
|
|
|
|
|
down(&tps->lock);
|
|
|
|
|
|
|
|
/* FIXME how can we tell whether a battery is present?
|
|
|
|
* likely involves a charge gauging chip (like BQ26501).
|
|
|
|
*/
|
|
|
|
|
|
|
|
seq_printf(s, "%scharging\n\n", tps->charging ? "" : "(not) ");
|
|
|
|
|
|
|
|
|
|
|
|
/* registers for monitoring battery charging and status; note
|
|
|
|
* that reading chgstat and regstat may ack IRQs...
|
|
|
|
*/
|
|
|
|
value = i2c_smbus_read_byte_data(&tps->client, TPS_CHGCONFIG);
|
|
|
|
dbg_chgconf(tps->por, buf, sizeof buf, value);
|
|
|
|
seq_printf(s, "chgconfig %s", buf);
|
|
|
|
|
|
|
|
value = i2c_smbus_read_byte_data(&tps->client, TPS_CHGSTATUS);
|
|
|
|
dbg_chgstat(buf, sizeof buf, value);
|
|
|
|
seq_printf(s, "chgstat %s", buf);
|
|
|
|
value = i2c_smbus_read_byte_data(&tps->client, TPS_MASK1);
|
|
|
|
dbg_chgstat(buf, sizeof buf, value);
|
|
|
|
seq_printf(s, "mask1 %s", buf);
|
|
|
|
/* ignore ackint1 */
|
|
|
|
|
|
|
|
value = i2c_smbus_read_byte_data(&tps->client, TPS_REGSTATUS);
|
|
|
|
dbg_regstat(buf, sizeof buf, value);
|
|
|
|
seq_printf(s, "regstat %s", buf);
|
|
|
|
value = i2c_smbus_read_byte_data(&tps->client, TPS_MASK2);
|
|
|
|
dbg_regstat(buf, sizeof buf, value);
|
|
|
|
seq_printf(s, "mask2 %s\n", buf);
|
|
|
|
/* ignore ackint2 */
|
|
|
|
|
|
|
|
(void) schedule_delayed_work(&tps->work, POWER_POLL_DELAY);
|
|
|
|
|
|
|
|
|
|
|
|
/* VMAIN voltage, enable lowpower, etc */
|
|
|
|
value = i2c_smbus_read_byte_data(&tps->client, TPS_VDCDC1);
|
|
|
|
seq_printf(s, "vdcdc1 %02x\n", value);
|
|
|
|
|
|
|
|
/* VCORE voltage, vibrator on/off */
|
|
|
|
value = i2c_smbus_read_byte_data(&tps->client, TPS_VDCDC2);
|
|
|
|
seq_printf(s, "vdcdc2 %02x\n", value);
|
|
|
|
|
|
|
|
/* both LD0s, and their lowpower behavior */
|
|
|
|
value = i2c_smbus_read_byte_data(&tps->client, TPS_VREGS1);
|
|
|
|
seq_printf(s, "vregs1 %02x\n\n", value);
|
|
|
|
|
|
|
|
|
|
|
|
/* LEDs and GPIOs */
|
|
|
|
value = i2c_smbus_read_byte_data(&tps->client, TPS_LED1_ON);
|
|
|
|
v2 = i2c_smbus_read_byte_data(&tps->client, TPS_LED1_PER);
|
|
|
|
seq_printf(s, "led1 %s, on=%02x, per=%02x, %d/%d msec\n",
|
|
|
|
(value & 0x80)
|
|
|
|
? ((v2 & 0x80) ? "on" : "off")
|
|
|
|
: ((v2 & 0x80) ? "blink" : "(nPG)"),
|
|
|
|
value, v2,
|
|
|
|
(value & 0x7f) * 10, (v2 & 0x7f) * 100);
|
|
|
|
|
|
|
|
value = i2c_smbus_read_byte_data(&tps->client, TPS_LED2_ON);
|
|
|
|
v2 = i2c_smbus_read_byte_data(&tps->client, TPS_LED2_PER);
|
|
|
|
seq_printf(s, "led2 %s, on=%02x, per=%02x, %d/%d msec\n",
|
|
|
|
(value & 0x80)
|
|
|
|
? ((v2 & 0x80) ? "on" : "off")
|
|
|
|
: ((v2 & 0x80) ? "blink" : "off"),
|
|
|
|
value, v2,
|
|
|
|
(value & 0x7f) * 10, (v2 & 0x7f) * 100);
|
|
|
|
|
|
|
|
value = i2c_smbus_read_byte_data(&tps->client, TPS_DEFGPIO);
|
|
|
|
v2 = i2c_smbus_read_byte_data(&tps->client, TPS_MASK3);
|
|
|
|
seq_printf(s, "defgpio %02x mask3 %02x\n", value, v2);
|
|
|
|
|
|
|
|
for (i = 0; i < 4; i++) {
|
2005-06-29 08:13:00 -06:00
|
|
|
if (value & (1 << (4 + i)))
|
2005-05-24 18:34:51 -06:00
|
|
|
seq_printf(s, " gpio%d-out %s\n", i + 1,
|
|
|
|
(value & (1 << i)) ? "low" : "hi ");
|
|
|
|
else
|
|
|
|
seq_printf(s, " gpio%d-in %s %s %s\n", i + 1,
|
|
|
|
(value & (1 << i)) ? "hi " : "low",
|
|
|
|
(v2 & (1 << i)) ? "no-irq" : "irq",
|
|
|
|
(v2 & (1 << (4 + i))) ? "rising" : "falling");
|
|
|
|
}
|
|
|
|
|
|
|
|
up(&tps->lock);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int dbg_tps_open(struct inode *inode, struct file *file)
|
|
|
|
{
|
|
|
|
return single_open(file, dbg_show, inode->u.generic_ip);
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct file_operations debug_fops = {
|
|
|
|
.open = dbg_tps_open,
|
|
|
|
.read = seq_read,
|
|
|
|
.llseek = seq_lseek,
|
|
|
|
.release = single_release,
|
|
|
|
};
|
|
|
|
|
|
|
|
#define DEBUG_FOPS &debug_fops
|
|
|
|
|
|
|
|
#else
|
|
|
|
#define DEBUG_FOPS NULL
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
|
|
|
|
/* handle IRQS in a task context, so we can use I2C calls */
|
|
|
|
static void tps65010_interrupt(struct tps65010 *tps)
|
|
|
|
{
|
|
|
|
u8 tmp = 0, mask, poll;
|
|
|
|
|
|
|
|
/* IRQs won't trigger irqs for certain events, but we can get
|
|
|
|
* others by polling (normally, with external power applied).
|
|
|
|
*/
|
|
|
|
poll = 0;
|
|
|
|
|
|
|
|
/* regstatus irqs */
|
|
|
|
if (tps->nmask2) {
|
|
|
|
tmp = i2c_smbus_read_byte_data(&tps->client, TPS_REGSTATUS);
|
|
|
|
mask = tmp ^ tps->regstatus;
|
|
|
|
tps->regstatus = tmp;
|
|
|
|
mask &= tps->nmask2;
|
|
|
|
} else
|
|
|
|
mask = 0;
|
|
|
|
if (mask) {
|
|
|
|
tps->regstatus = tmp;
|
|
|
|
/* may need to shut something down ... */
|
|
|
|
|
|
|
|
/* "off" usually means deep sleep */
|
|
|
|
if (tmp & TPS_REG_ONOFF) {
|
|
|
|
pr_info("%s: power off button\n", DRIVER_NAME);
|
|
|
|
#if 0
|
|
|
|
/* REVISIT: this might need its own workqueue
|
|
|
|
* plus tweaks including deadlock avoidance ...
|
|
|
|
*/
|
|
|
|
software_suspend();
|
|
|
|
#endif
|
|
|
|
poll = 1;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* chgstatus irqs */
|
|
|
|
if (tps->nmask1) {
|
|
|
|
tmp = i2c_smbus_read_byte_data(&tps->client, TPS_CHGSTATUS);
|
|
|
|
mask = tmp ^ tps->chgstatus;
|
|
|
|
tps->chgstatus = tmp;
|
|
|
|
mask &= tps->nmask1;
|
|
|
|
} else
|
|
|
|
mask = 0;
|
|
|
|
if (mask) {
|
|
|
|
unsigned charging = 0;
|
|
|
|
|
|
|
|
show_chgstatus("chg/irq", tmp);
|
|
|
|
if (tmp & (TPS_CHG_USB|TPS_CHG_AC))
|
|
|
|
show_chgconfig(tps->por, "conf", tps->chgconf);
|
|
|
|
|
|
|
|
/* Unless it was turned off or disabled, we charge any
|
|
|
|
* battery whenever there's power available for it
|
|
|
|
* and the charger hasn't been disabled.
|
|
|
|
*/
|
|
|
|
if (!(tps->chgstatus & ~(TPS_CHG_USB|TPS_CHG_AC))
|
|
|
|
&& (tps->chgstatus & (TPS_CHG_USB|TPS_CHG_AC))
|
|
|
|
&& (tps->chgconf & TPS_CHARGE_ENABLE)
|
|
|
|
) {
|
|
|
|
if (tps->chgstatus & TPS_CHG_USB) {
|
|
|
|
/* VBUS options are readonly until reconnect */
|
|
|
|
if (mask & TPS_CHG_USB)
|
|
|
|
set_bit(FLAG_VBUS_CHANGED, &tps->flags);
|
|
|
|
charging = 1;
|
|
|
|
} else if (tps->chgstatus & TPS_CHG_AC)
|
|
|
|
charging = 1;
|
|
|
|
}
|
|
|
|
if (charging != tps->charging) {
|
|
|
|
tps->charging = charging;
|
|
|
|
pr_info("%s: battery %scharging\n",
|
|
|
|
DRIVER_NAME, charging ? "" :
|
|
|
|
((tps->chgstatus & (TPS_CHG_USB|TPS_CHG_AC))
|
|
|
|
? "NOT " : "dis"));
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* always poll to detect (a) power removal, without tps65013
|
|
|
|
* NO_CHG IRQ; or (b) restart of charging after stop.
|
|
|
|
*/
|
|
|
|
if ((tps->model != TPS65013 || !tps->charging)
|
|
|
|
&& (tps->chgstatus & (TPS_CHG_USB|TPS_CHG_AC)))
|
|
|
|
poll = 1;
|
|
|
|
if (poll)
|
|
|
|
(void) schedule_delayed_work(&tps->work, POWER_POLL_DELAY);
|
|
|
|
|
|
|
|
/* also potentially gpio-in rise or fall */
|
|
|
|
}
|
|
|
|
|
|
|
|
/* handle IRQs and polling using keventd for now */
|
|
|
|
static void tps65010_work(void *_tps)
|
|
|
|
{
|
|
|
|
struct tps65010 *tps = _tps;
|
|
|
|
|
|
|
|
down(&tps->lock);
|
|
|
|
|
|
|
|
tps65010_interrupt(tps);
|
|
|
|
|
|
|
|
if (test_and_clear_bit(FLAG_VBUS_CHANGED, &tps->flags)) {
|
|
|
|
int status;
|
|
|
|
u8 chgconfig, tmp;
|
|
|
|
|
|
|
|
chgconfig = i2c_smbus_read_byte_data(&tps->client,
|
|
|
|
TPS_CHGCONFIG);
|
|
|
|
chgconfig &= ~(TPS_VBUS_500MA | TPS_VBUS_CHARGING);
|
|
|
|
if (tps->vbus == 500)
|
|
|
|
chgconfig |= TPS_VBUS_500MA | TPS_VBUS_CHARGING;
|
|
|
|
else if (tps->vbus >= 100)
|
|
|
|
chgconfig |= TPS_VBUS_CHARGING;
|
|
|
|
|
|
|
|
status = i2c_smbus_write_byte_data(&tps->client,
|
|
|
|
TPS_CHGCONFIG, chgconfig);
|
|
|
|
|
|
|
|
/* vbus update fails unless VBUS is connected! */
|
|
|
|
tmp = i2c_smbus_read_byte_data(&tps->client, TPS_CHGCONFIG);
|
|
|
|
tps->chgconf = tmp;
|
|
|
|
show_chgconfig(tps->por, "update vbus", tmp);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (test_and_clear_bit(FLAG_IRQ_ENABLE, &tps->flags))
|
|
|
|
enable_irq(tps->irq);
|
|
|
|
|
|
|
|
up(&tps->lock);
|
|
|
|
}
|
|
|
|
|
|
|
|
static irqreturn_t tps65010_irq(int irq, void *_tps, struct pt_regs *regs)
|
|
|
|
{
|
|
|
|
struct tps65010 *tps = _tps;
|
|
|
|
|
|
|
|
disable_irq_nosync(irq);
|
|
|
|
set_bit(FLAG_IRQ_ENABLE, &tps->flags);
|
|
|
|
(void) schedule_work(&tps->work);
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
|
|
|
|
static struct tps65010 *the_tps;
|
|
|
|
|
|
|
|
static int __exit tps65010_detach_client(struct i2c_client *client)
|
|
|
|
{
|
|
|
|
struct tps65010 *tps;
|
|
|
|
|
|
|
|
tps = container_of(client, struct tps65010, client);
|
|
|
|
#ifdef CONFIG_ARM
|
|
|
|
if (machine_is_omap_h2())
|
|
|
|
omap_free_gpio(58);
|
|
|
|
if (machine_is_omap_osk())
|
|
|
|
omap_free_gpio(OMAP_MPUIO(1));
|
|
|
|
#endif
|
|
|
|
free_irq(tps->irq, tps);
|
|
|
|
debugfs_remove(tps->file);
|
|
|
|
if (i2c_detach_client(client) == 0)
|
|
|
|
kfree(tps);
|
2005-06-29 08:13:00 -06:00
|
|
|
the_tps = NULL;
|
2005-05-24 18:34:51 -06:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int tps65010_noscan(struct i2c_adapter *bus)
|
|
|
|
{
|
|
|
|
/* pure paranoia, in case someone adds another i2c bus
|
|
|
|
* after our init section's gone...
|
|
|
|
*/
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* no error returns, they'd just make bus scanning stop */
|
|
|
|
static int __init
|
|
|
|
tps65010_probe(struct i2c_adapter *bus, int address, int kind)
|
|
|
|
{
|
|
|
|
struct tps65010 *tps;
|
|
|
|
int status;
|
|
|
|
|
|
|
|
if (the_tps) {
|
|
|
|
dev_dbg(&bus->dev, "only one %s for now\n", DRIVER_NAME);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-10-17 15:09:43 -06:00
|
|
|
tps = kzalloc(sizeof *tps, GFP_KERNEL);
|
2005-05-24 18:34:51 -06:00
|
|
|
if (!tps)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
init_MUTEX(&tps->lock);
|
|
|
|
INIT_WORK(&tps->work, tps65010_work, tps);
|
|
|
|
tps->irq = -1;
|
|
|
|
tps->client.addr = address;
|
|
|
|
tps->client.adapter = bus;
|
|
|
|
tps->client.driver = &tps65010_driver;
|
|
|
|
strlcpy(tps->client.name, DRIVER_NAME, I2C_NAME_SIZE);
|
|
|
|
|
|
|
|
status = i2c_attach_client(&tps->client);
|
|
|
|
if (status < 0) {
|
|
|
|
dev_dbg(&bus->dev, "can't attach %s to device %d, err %d\n",
|
|
|
|
DRIVER_NAME, address, status);
|
2005-06-29 08:13:00 -06:00
|
|
|
goto fail1;
|
2005-05-24 18:34:51 -06:00
|
|
|
}
|
|
|
|
|
|
|
|
#ifdef CONFIG_ARM
|
|
|
|
if (machine_is_omap_h2()) {
|
|
|
|
tps->model = TPS65010;
|
|
|
|
omap_cfg_reg(W4_GPIO58);
|
|
|
|
tps->irq = OMAP_GPIO_IRQ(58);
|
|
|
|
omap_request_gpio(58);
|
|
|
|
omap_set_gpio_direction(58, 1);
|
2005-06-29 08:13:00 -06:00
|
|
|
set_irq_type(tps->irq, IRQT_FALLING);
|
2005-05-24 18:34:51 -06:00
|
|
|
}
|
|
|
|
if (machine_is_omap_osk()) {
|
|
|
|
tps->model = TPS65010;
|
|
|
|
// omap_cfg_reg(U19_1610_MPUIO1);
|
|
|
|
tps->irq = OMAP_GPIO_IRQ(OMAP_MPUIO(1));
|
|
|
|
omap_request_gpio(OMAP_MPUIO(1));
|
|
|
|
omap_set_gpio_direction(OMAP_MPUIO(1), 1);
|
2005-06-29 08:13:00 -06:00
|
|
|
set_irq_type(tps->irq, IRQT_FALLING);
|
2005-05-24 18:34:51 -06:00
|
|
|
}
|
|
|
|
if (machine_is_omap_h3()) {
|
|
|
|
tps->model = TPS65013;
|
|
|
|
|
|
|
|
// FIXME set up this board's IRQ ...
|
|
|
|
}
|
|
|
|
#else
|
|
|
|
#define set_irq_type(num,trigger) do{}while(0)
|
|
|
|
#endif
|
|
|
|
|
|
|
|
if (tps->irq > 0) {
|
|
|
|
set_irq_type(tps->irq, IRQT_LOW);
|
|
|
|
status = request_irq(tps->irq, tps65010_irq,
|
|
|
|
SA_SAMPLE_RANDOM, DRIVER_NAME, tps);
|
|
|
|
if (status < 0) {
|
|
|
|
dev_dbg(&tps->client.dev, "can't get IRQ %d, err %d\n",
|
|
|
|
tps->irq, status);
|
|
|
|
i2c_detach_client(&tps->client);
|
|
|
|
goto fail1;
|
|
|
|
}
|
|
|
|
#ifdef CONFIG_ARM
|
|
|
|
/* annoying race here, ideally we'd have an option
|
|
|
|
* to claim the irq now and enable it later.
|
|
|
|
*/
|
|
|
|
disable_irq(tps->irq);
|
|
|
|
set_bit(FLAG_IRQ_ENABLE, &tps->flags);
|
|
|
|
#endif
|
|
|
|
} else
|
|
|
|
printk(KERN_WARNING "%s: IRQ not configured!\n",
|
|
|
|
DRIVER_NAME);
|
|
|
|
|
|
|
|
|
|
|
|
switch (tps->model) {
|
|
|
|
case TPS65010:
|
|
|
|
case TPS65012:
|
|
|
|
tps->por = 1;
|
|
|
|
break;
|
|
|
|
case TPS_UNKNOWN:
|
|
|
|
printk(KERN_WARNING "%s: unknown TPS chip\n", DRIVER_NAME);
|
|
|
|
break;
|
|
|
|
/* else CHGCONFIG.POR is replaced by AUA, enabling a WAIT mode */
|
|
|
|
}
|
|
|
|
tps->chgconf = i2c_smbus_read_byte_data(&tps->client, TPS_CHGCONFIG);
|
|
|
|
show_chgconfig(tps->por, "conf/init", tps->chgconf);
|
|
|
|
|
|
|
|
show_chgstatus("chg/init",
|
|
|
|
i2c_smbus_read_byte_data(&tps->client, TPS_CHGSTATUS));
|
|
|
|
show_regstatus("reg/init",
|
|
|
|
i2c_smbus_read_byte_data(&tps->client, TPS_REGSTATUS));
|
|
|
|
|
|
|
|
pr_debug("%s: vdcdc1 0x%02x, vdcdc2 %02x, vregs1 %02x\n", DRIVER_NAME,
|
|
|
|
i2c_smbus_read_byte_data(&tps->client, TPS_VDCDC1),
|
|
|
|
i2c_smbus_read_byte_data(&tps->client, TPS_VDCDC2),
|
|
|
|
i2c_smbus_read_byte_data(&tps->client, TPS_VREGS1));
|
|
|
|
pr_debug("%s: defgpio 0x%02x, mask3 0x%02x\n", DRIVER_NAME,
|
|
|
|
i2c_smbus_read_byte_data(&tps->client, TPS_DEFGPIO),
|
|
|
|
i2c_smbus_read_byte_data(&tps->client, TPS_MASK3));
|
|
|
|
|
|
|
|
tps65010_driver.attach_adapter = tps65010_noscan;
|
|
|
|
the_tps = tps;
|
|
|
|
|
|
|
|
#if defined(CONFIG_USB_GADGET) && !defined(CONFIG_USB_OTG)
|
|
|
|
/* USB hosts can't draw VBUS. OTG devices could, later
|
|
|
|
* when OTG infrastructure enables it. USB peripherals
|
|
|
|
* could be relying on VBUS while booting, though.
|
|
|
|
*/
|
|
|
|
tps->vbus = 100;
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/* unmask the "interesting" irqs, then poll once to
|
|
|
|
* kickstart monitoring, initialize shadowed status
|
|
|
|
* registers, and maybe disable VBUS draw.
|
|
|
|
*/
|
|
|
|
tps->nmask1 = ~0;
|
|
|
|
(void) i2c_smbus_write_byte_data(&tps->client, TPS_MASK1, ~tps->nmask1);
|
|
|
|
|
|
|
|
tps->nmask2 = TPS_REG_ONOFF;
|
|
|
|
if (tps->model == TPS65013)
|
|
|
|
tps->nmask2 |= TPS_REG_NO_CHG;
|
|
|
|
(void) i2c_smbus_write_byte_data(&tps->client, TPS_MASK2, ~tps->nmask2);
|
|
|
|
|
|
|
|
(void) i2c_smbus_write_byte_data(&tps->client, TPS_MASK3, 0x0f
|
|
|
|
| i2c_smbus_read_byte_data(&tps->client, TPS_MASK3));
|
|
|
|
|
|
|
|
tps65010_work(tps);
|
|
|
|
|
|
|
|
tps->file = debugfs_create_file(DRIVER_NAME, S_IRUGO, NULL,
|
|
|
|
tps, DEBUG_FOPS);
|
|
|
|
return 0;
|
2005-06-29 08:13:00 -06:00
|
|
|
fail1:
|
|
|
|
kfree(tps);
|
|
|
|
return 0;
|
2005-05-24 18:34:51 -06:00
|
|
|
}
|
|
|
|
|
|
|
|
static int __init tps65010_scan_bus(struct i2c_adapter *bus)
|
|
|
|
{
|
|
|
|
if (!i2c_check_functionality(bus, I2C_FUNC_SMBUS_BYTE_DATA))
|
|
|
|
return -EINVAL;
|
|
|
|
return i2c_probe(bus, &addr_data, tps65010_probe);
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct i2c_driver tps65010_driver = {
|
|
|
|
.owner = THIS_MODULE,
|
|
|
|
.name = "tps65010",
|
|
|
|
.attach_adapter = tps65010_scan_bus,
|
|
|
|
.detach_client = __exit_p(tps65010_detach_client),
|
|
|
|
};
|
|
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
|
|
|
|
/* Draw from VBUS:
|
|
|
|
* 0 mA -- DON'T DRAW (might supply power instead)
|
|
|
|
* 100 mA -- usb unit load (slowest charge rate)
|
|
|
|
* 500 mA -- usb high power (fast battery charge)
|
|
|
|
*/
|
|
|
|
int tps65010_set_vbus_draw(unsigned mA)
|
|
|
|
{
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
if (!the_tps)
|
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
/* assumes non-SMP */
|
|
|
|
local_irq_save(flags);
|
|
|
|
if (mA >= 500)
|
|
|
|
mA = 500;
|
|
|
|
else if (mA >= 100)
|
|
|
|
mA = 100;
|
|
|
|
else
|
|
|
|
mA = 0;
|
|
|
|
the_tps->vbus = mA;
|
|
|
|
if ((the_tps->chgstatus & TPS_CHG_USB)
|
|
|
|
&& test_and_set_bit(
|
|
|
|
FLAG_VBUS_CHANGED, &the_tps->flags)) {
|
|
|
|
/* gadget drivers call this in_irq() */
|
|
|
|
(void) schedule_work(&the_tps->work);
|
|
|
|
}
|
|
|
|
local_irq_restore(flags);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(tps65010_set_vbus_draw);
|
|
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* tps65010_set_gpio_out_value parameter:
|
|
|
|
* gpio: GPIO1, GPIO2, GPIO3 or GPIO4
|
|
|
|
* value: LOW or HIGH
|
|
|
|
*/
|
|
|
|
int tps65010_set_gpio_out_value(unsigned gpio, unsigned value)
|
|
|
|
{
|
|
|
|
int status;
|
|
|
|
unsigned defgpio;
|
|
|
|
|
|
|
|
if (!the_tps)
|
|
|
|
return -ENODEV;
|
|
|
|
if ((gpio < GPIO1) || (gpio > GPIO4))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
down(&the_tps->lock);
|
|
|
|
|
|
|
|
defgpio = i2c_smbus_read_byte_data(&the_tps->client, TPS_DEFGPIO);
|
|
|
|
|
|
|
|
/* Configure GPIO for output */
|
|
|
|
defgpio |= 1 << (gpio + 3);
|
|
|
|
|
|
|
|
/* Writing 1 forces a logic 0 on that GPIO and vice versa */
|
|
|
|
switch (value) {
|
|
|
|
case LOW:
|
|
|
|
defgpio |= 1 << (gpio - 1); /* set GPIO low by writing 1 */
|
|
|
|
break;
|
|
|
|
/* case HIGH: */
|
|
|
|
default:
|
|
|
|
defgpio &= ~(1 << (gpio - 1)); /* set GPIO high by writing 0 */
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
status = i2c_smbus_write_byte_data(&the_tps->client,
|
|
|
|
TPS_DEFGPIO, defgpio);
|
|
|
|
|
|
|
|
pr_debug("%s: gpio%dout = %s, defgpio 0x%02x\n", DRIVER_NAME,
|
|
|
|
gpio, value ? "high" : "low",
|
|
|
|
i2c_smbus_read_byte_data(&the_tps->client, TPS_DEFGPIO));
|
|
|
|
|
|
|
|
up(&the_tps->lock);
|
|
|
|
return status;
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(tps65010_set_gpio_out_value);
|
|
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* tps65010_set_led parameter:
|
|
|
|
* led: LED1 or LED2
|
|
|
|
* mode: ON, OFF or BLINK
|
|
|
|
*/
|
|
|
|
int tps65010_set_led(unsigned led, unsigned mode)
|
|
|
|
{
|
|
|
|
int status;
|
|
|
|
unsigned led_on, led_per, offs;
|
|
|
|
|
|
|
|
if (!the_tps)
|
|
|
|
return -ENODEV;
|
|
|
|
|
2005-06-29 08:13:00 -06:00
|
|
|
if (led == LED1)
|
2005-05-24 18:34:51 -06:00
|
|
|
offs = 0;
|
|
|
|
else {
|
|
|
|
offs = 2;
|
|
|
|
led = LED2;
|
|
|
|
}
|
|
|
|
|
|
|
|
down(&the_tps->lock);
|
|
|
|
|
2005-06-29 08:13:00 -06:00
|
|
|
pr_debug("%s: led%i_on 0x%02x\n", DRIVER_NAME, led,
|
|
|
|
i2c_smbus_read_byte_data(&the_tps->client,
|
|
|
|
TPS_LED1_ON + offs));
|
2005-05-24 18:34:51 -06:00
|
|
|
|
2005-06-29 08:13:00 -06:00
|
|
|
pr_debug("%s: led%i_per 0x%02x\n", DRIVER_NAME, led,
|
|
|
|
i2c_smbus_read_byte_data(&the_tps->client,
|
|
|
|
TPS_LED1_PER + offs));
|
2005-05-24 18:34:51 -06:00
|
|
|
|
|
|
|
switch (mode) {
|
|
|
|
case OFF:
|
|
|
|
led_on = 1 << 7;
|
|
|
|
led_per = 0 << 7;
|
|
|
|
break;
|
|
|
|
case ON:
|
|
|
|
led_on = 1 << 7;
|
|
|
|
led_per = 1 << 7;
|
|
|
|
break;
|
|
|
|
case BLINK:
|
|
|
|
led_on = 0x30 | (0 << 7);
|
|
|
|
led_per = 0x08 | (1 << 7);
|
|
|
|
break;
|
|
|
|
default:
|
2005-06-29 08:13:00 -06:00
|
|
|
printk(KERN_ERR "%s: Wrong mode parameter for set_led()\n",
|
2005-05-24 18:34:51 -06:00
|
|
|
DRIVER_NAME);
|
|
|
|
up(&the_tps->lock);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
status = i2c_smbus_write_byte_data(&the_tps->client,
|
|
|
|
TPS_LED1_ON + offs, led_on);
|
|
|
|
|
|
|
|
if (status != 0) {
|
|
|
|
printk(KERN_ERR "%s: Failed to write led%i_on register\n",
|
|
|
|
DRIVER_NAME, led);
|
|
|
|
up(&the_tps->lock);
|
|
|
|
return status;
|
|
|
|
}
|
|
|
|
|
2005-06-29 08:13:00 -06:00
|
|
|
pr_debug("%s: led%i_on 0x%02x\n", DRIVER_NAME, led,
|
2005-05-24 18:34:51 -06:00
|
|
|
i2c_smbus_read_byte_data(&the_tps->client, TPS_LED1_ON + offs));
|
|
|
|
|
|
|
|
status = i2c_smbus_write_byte_data(&the_tps->client,
|
|
|
|
TPS_LED1_PER + offs, led_per);
|
|
|
|
|
|
|
|
if (status != 0) {
|
|
|
|
printk(KERN_ERR "%s: Failed to write led%i_per register\n",
|
|
|
|
DRIVER_NAME, led);
|
|
|
|
up(&the_tps->lock);
|
|
|
|
return status;
|
|
|
|
}
|
|
|
|
|
2005-06-29 08:13:00 -06:00
|
|
|
pr_debug("%s: led%i_per 0x%02x\n", DRIVER_NAME, led,
|
|
|
|
i2c_smbus_read_byte_data(&the_tps->client,
|
|
|
|
TPS_LED1_PER + offs));
|
2005-05-24 18:34:51 -06:00
|
|
|
|
|
|
|
up(&the_tps->lock);
|
|
|
|
|
|
|
|
return status;
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(tps65010_set_led);
|
|
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* tps65010_set_vib parameter:
|
|
|
|
* value: ON or OFF
|
|
|
|
*/
|
|
|
|
int tps65010_set_vib(unsigned value)
|
|
|
|
{
|
|
|
|
int status;
|
|
|
|
unsigned vdcdc2;
|
|
|
|
|
|
|
|
if (!the_tps)
|
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
down(&the_tps->lock);
|
|
|
|
|
|
|
|
vdcdc2 = i2c_smbus_read_byte_data(&the_tps->client, TPS_VDCDC2);
|
|
|
|
vdcdc2 &= ~(1 << 1);
|
|
|
|
if (value)
|
|
|
|
vdcdc2 |= (1 << 1);
|
|
|
|
status = i2c_smbus_write_byte_data(&the_tps->client,
|
|
|
|
TPS_VDCDC2, vdcdc2);
|
|
|
|
|
|
|
|
pr_debug("%s: vibrator %s\n", DRIVER_NAME, value ? "on" : "off");
|
|
|
|
|
|
|
|
up(&the_tps->lock);
|
|
|
|
return status;
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(tps65010_set_vib);
|
|
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* tps65010_set_low_pwr parameter:
|
|
|
|
* mode: ON or OFF
|
|
|
|
*/
|
|
|
|
int tps65010_set_low_pwr(unsigned mode)
|
|
|
|
{
|
|
|
|
int status;
|
|
|
|
unsigned vdcdc1;
|
|
|
|
|
|
|
|
if (!the_tps)
|
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
down(&the_tps->lock);
|
|
|
|
|
|
|
|
pr_debug("%s: %s low_pwr, vdcdc1 0x%02x\n", DRIVER_NAME,
|
|
|
|
mode ? "enable" : "disable",
|
|
|
|
i2c_smbus_read_byte_data(&the_tps->client, TPS_VDCDC1));
|
|
|
|
|
|
|
|
vdcdc1 = i2c_smbus_read_byte_data(&the_tps->client, TPS_VDCDC1);
|
|
|
|
|
|
|
|
switch (mode) {
|
|
|
|
case OFF:
|
|
|
|
vdcdc1 &= ~TPS_ENABLE_LP; /* disable ENABLE_LP bit */
|
|
|
|
break;
|
|
|
|
/* case ON: */
|
|
|
|
default:
|
|
|
|
vdcdc1 |= TPS_ENABLE_LP; /* enable ENABLE_LP bit */
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
status = i2c_smbus_write_byte_data(&the_tps->client,
|
|
|
|
TPS_VDCDC1, vdcdc1);
|
|
|
|
|
|
|
|
if (status != 0)
|
|
|
|
printk(KERN_ERR "%s: Failed to write vdcdc1 register\n",
|
2005-06-29 08:13:00 -06:00
|
|
|
DRIVER_NAME);
|
2005-05-24 18:34:51 -06:00
|
|
|
else
|
|
|
|
pr_debug("%s: vdcdc1 0x%02x\n", DRIVER_NAME,
|
|
|
|
i2c_smbus_read_byte_data(&the_tps->client, TPS_VDCDC1));
|
|
|
|
|
|
|
|
up(&the_tps->lock);
|
|
|
|
|
|
|
|
return status;
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(tps65010_set_low_pwr);
|
|
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* tps65010_config_vregs1 parameter:
|
|
|
|
* value to be written to VREGS1 register
|
|
|
|
* Note: The complete register is written, set all bits you need
|
|
|
|
*/
|
|
|
|
int tps65010_config_vregs1(unsigned value)
|
|
|
|
{
|
|
|
|
int status;
|
|
|
|
|
|
|
|
if (!the_tps)
|
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
down(&the_tps->lock);
|
|
|
|
|
|
|
|
pr_debug("%s: vregs1 0x%02x\n", DRIVER_NAME,
|
2005-06-29 08:13:00 -06:00
|
|
|
i2c_smbus_read_byte_data(&the_tps->client, TPS_VREGS1));
|
2005-05-24 18:34:51 -06:00
|
|
|
|
|
|
|
status = i2c_smbus_write_byte_data(&the_tps->client,
|
|
|
|
TPS_VREGS1, value);
|
|
|
|
|
|
|
|
if (status != 0)
|
|
|
|
printk(KERN_ERR "%s: Failed to write vregs1 register\n",
|
2005-06-29 08:13:00 -06:00
|
|
|
DRIVER_NAME);
|
2005-05-24 18:34:51 -06:00
|
|
|
else
|
|
|
|
pr_debug("%s: vregs1 0x%02x\n", DRIVER_NAME,
|
|
|
|
i2c_smbus_read_byte_data(&the_tps->client, TPS_VREGS1));
|
|
|
|
|
|
|
|
up(&the_tps->lock);
|
|
|
|
|
|
|
|
return status;
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(tps65010_config_vregs1);
|
|
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* tps65013_set_low_pwr parameter:
|
|
|
|
* mode: ON or OFF
|
|
|
|
*/
|
|
|
|
|
|
|
|
/* FIXME: Assumes AC or USB power is present. Setting AUA bit is not
|
|
|
|
required if power supply is through a battery */
|
|
|
|
|
|
|
|
int tps65013_set_low_pwr(unsigned mode)
|
|
|
|
{
|
|
|
|
int status;
|
|
|
|
unsigned vdcdc1, chgconfig;
|
|
|
|
|
|
|
|
if (!the_tps || the_tps->por)
|
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
down(&the_tps->lock);
|
|
|
|
|
|
|
|
pr_debug("%s: %s low_pwr, chgconfig 0x%02x vdcdc1 0x%02x\n",
|
|
|
|
DRIVER_NAME,
|
|
|
|
mode ? "enable" : "disable",
|
|
|
|
i2c_smbus_read_byte_data(&the_tps->client, TPS_CHGCONFIG),
|
|
|
|
i2c_smbus_read_byte_data(&the_tps->client, TPS_VDCDC1));
|
|
|
|
|
|
|
|
chgconfig = i2c_smbus_read_byte_data(&the_tps->client, TPS_CHGCONFIG);
|
|
|
|
vdcdc1 = i2c_smbus_read_byte_data(&the_tps->client, TPS_VDCDC1);
|
|
|
|
|
|
|
|
switch (mode) {
|
|
|
|
case OFF:
|
|
|
|
chgconfig &= ~TPS65013_AUA; /* disable AUA bit */
|
|
|
|
vdcdc1 &= ~TPS_ENABLE_LP; /* disable ENABLE_LP bit */
|
|
|
|
break;
|
|
|
|
/* case ON: */
|
|
|
|
default:
|
|
|
|
chgconfig |= TPS65013_AUA; /* enable AUA bit */
|
|
|
|
vdcdc1 |= TPS_ENABLE_LP; /* enable ENABLE_LP bit */
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
status = i2c_smbus_write_byte_data(&the_tps->client,
|
|
|
|
TPS_CHGCONFIG, chgconfig);
|
|
|
|
if (status != 0) {
|
|
|
|
printk(KERN_ERR "%s: Failed to write chconfig register\n",
|
|
|
|
DRIVER_NAME);
|
|
|
|
up(&the_tps->lock);
|
|
|
|
return status;
|
|
|
|
}
|
|
|
|
|
|
|
|
chgconfig = i2c_smbus_read_byte_data(&the_tps->client, TPS_CHGCONFIG);
|
|
|
|
the_tps->chgconf = chgconfig;
|
|
|
|
show_chgconfig(0, "chgconf", chgconfig);
|
|
|
|
|
|
|
|
status = i2c_smbus_write_byte_data(&the_tps->client,
|
|
|
|
TPS_VDCDC1, vdcdc1);
|
|
|
|
|
|
|
|
if (status != 0)
|
|
|
|
printk(KERN_ERR "%s: Failed to write vdcdc1 register\n",
|
|
|
|
DRIVER_NAME);
|
|
|
|
else
|
|
|
|
pr_debug("%s: vdcdc1 0x%02x\n", DRIVER_NAME,
|
|
|
|
i2c_smbus_read_byte_data(&the_tps->client, TPS_VDCDC1));
|
|
|
|
|
|
|
|
up(&the_tps->lock);
|
|
|
|
|
|
|
|
return status;
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(tps65013_set_low_pwr);
|
|
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
|
|
|
|
static int __init tps_init(void)
|
|
|
|
{
|
|
|
|
u32 tries = 3;
|
|
|
|
int status = -ENODEV;
|
|
|
|
|
|
|
|
printk(KERN_INFO "%s: version %s\n", DRIVER_NAME, DRIVER_VERSION);
|
|
|
|
|
|
|
|
/* some boards have startup glitches */
|
|
|
|
while (tries--) {
|
|
|
|
status = i2c_add_driver(&tps65010_driver);
|
|
|
|
if (the_tps)
|
|
|
|
break;
|
|
|
|
i2c_del_driver(&tps65010_driver);
|
|
|
|
if (!tries) {
|
|
|
|
printk(KERN_ERR "%s: no chip?\n", DRIVER_NAME);
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
pr_debug("%s: re-probe ...\n", DRIVER_NAME);
|
|
|
|
msleep(10);
|
|
|
|
}
|
|
|
|
|
2005-06-29 08:13:00 -06:00
|
|
|
#ifdef CONFIG_ARM
|
2005-05-24 18:34:51 -06:00
|
|
|
if (machine_is_omap_osk()) {
|
|
|
|
|
|
|
|
// FIXME: More should be placed in the initialization code
|
|
|
|
// of the submodules (DSP, ethernet, power management,
|
|
|
|
// board-osk.c). Careful: I2C is initialized "late".
|
|
|
|
|
|
|
|
/* Let LED1 (D9) blink */
|
|
|
|
tps65010_set_led(LED1, BLINK);
|
|
|
|
|
|
|
|
/* Disable LED 2 (D2) */
|
|
|
|
tps65010_set_led(LED2, OFF);
|
|
|
|
|
|
|
|
/* Set GPIO 1 HIGH to disable VBUS power supply;
|
|
|
|
* OHCI driver powers it up/down as needed.
|
|
|
|
*/
|
|
|
|
tps65010_set_gpio_out_value(GPIO1, HIGH);
|
|
|
|
|
|
|
|
/* Set GPIO 2 low to turn on LED D3 */
|
|
|
|
tps65010_set_gpio_out_value(GPIO2, HIGH);
|
|
|
|
|
|
|
|
/* Set GPIO 3 low to take ethernet out of reset */
|
|
|
|
tps65010_set_gpio_out_value(GPIO3, LOW);
|
|
|
|
|
|
|
|
/* gpio4 for VDD_DSP */
|
|
|
|
|
|
|
|
/* Enable LOW_PWR */
|
|
|
|
tps65010_set_low_pwr(ON);
|
|
|
|
|
|
|
|
/* Switch VLDO2 to 3.0V for AIC23 */
|
|
|
|
tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V | TPS_LDO1_ENABLE);
|
|
|
|
|
|
|
|
} else if (machine_is_omap_h2()) {
|
|
|
|
/* gpio3 for SD, gpio4 for VDD_DSP */
|
|
|
|
|
|
|
|
/* Enable LOW_PWR */
|
|
|
|
tps65010_set_low_pwr(ON);
|
|
|
|
} else if (machine_is_omap_h3()) {
|
|
|
|
/* gpio4 for SD, gpio3 for VDD_DSP */
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
/* Enable LOW_PWR */
|
|
|
|
tps65013_set_low_pwr(ON);
|
|
|
|
#endif
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
|
|
return status;
|
|
|
|
}
|
|
|
|
/* NOTE: this MUST be initialized before the other parts of the system
|
|
|
|
* that rely on it ... but after the i2c bus on which this relies.
|
|
|
|
* That is, much earlier than on PC-type systems, which don't often use
|
|
|
|
* I2C as a core system bus.
|
|
|
|
*/
|
|
|
|
subsys_initcall(tps_init);
|
|
|
|
|
|
|
|
static void __exit tps_exit(void)
|
|
|
|
{
|
|
|
|
i2c_del_driver(&tps65010_driver);
|
|
|
|
}
|
|
|
|
module_exit(tps_exit);
|
|
|
|
|