2010-07-27 09:35:56 -06:00
|
|
|
/*
|
|
|
|
* arch/arm/mach-lpc32xx/pm.c
|
|
|
|
*
|
|
|
|
* Original authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
|
|
|
|
* Modified by Kevin Wells <kevin.wells@nxp.com>
|
|
|
|
*
|
|
|
|
* 2005 (c) MontaVista Software, Inc. This file is licensed under
|
|
|
|
* the terms of the GNU General Public License version 2. This program
|
|
|
|
* is licensed "as is" without any warranty of any kind, whether express
|
|
|
|
* or implied.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/*
|
|
|
|
* LPC32XX CPU and system power management
|
|
|
|
*
|
2012-02-27 09:31:24 -07:00
|
|
|
* The LPC32XX has three CPU modes for controlling system power: run,
|
2010-07-27 09:35:56 -06:00
|
|
|
* direct-run, and halt modes. When switching between halt and run modes,
|
|
|
|
* the CPU transistions through direct-run mode. For Linux, direct-run
|
|
|
|
* mode is not used in normal operation. Halt mode is used when the
|
|
|
|
* system is fully suspended.
|
|
|
|
*
|
|
|
|
* Run mode:
|
|
|
|
* The ARM CPU clock (HCLK_PLL), HCLK bus clock, and PCLK bus clocks are
|
|
|
|
* derived from the HCLK PLL. The HCLK and PCLK bus rates are divided from
|
|
|
|
* the HCLK_PLL rate. Linux runs in this mode.
|
|
|
|
*
|
|
|
|
* Direct-run mode:
|
|
|
|
* The ARM CPU clock, HCLK bus clock, and PCLK bus clocks are driven from
|
|
|
|
* SYSCLK. SYSCLK is usually around 13MHz, but may vary based on SYSCLK
|
|
|
|
* source or the frequency of the main oscillator. In this mode, the
|
|
|
|
* HCLK_PLL can be safely enabled, changed, or disabled.
|
|
|
|
*
|
|
|
|
* Halt mode:
|
|
|
|
* SYSCLK is gated off and the CPU and system clocks are halted.
|
|
|
|
* Peripherals based on the 32KHz oscillator clock (ie, RTC, touch,
|
|
|
|
* key scanner, etc.) still operate if enabled. In this state, an enabled
|
|
|
|
* system event (ie, GPIO state change, RTC match, key press, etc.) will
|
|
|
|
* wake the system up back into direct-run mode.
|
|
|
|
*
|
|
|
|
* DRAM refresh
|
|
|
|
* DRAM clocking and refresh are slightly different for systems with DDR
|
|
|
|
* DRAM or regular SDRAM devices. If SDRAM is used in the system, the
|
|
|
|
* SDRAM will still be accessible in direct-run mode. In DDR based systems,
|
2011-03-30 19:57:33 -06:00
|
|
|
* a transition to direct-run mode will stop all DDR accesses (no clocks).
|
2010-07-27 09:35:56 -06:00
|
|
|
* Because of this, the code to switch power modes and the code to enter
|
|
|
|
* and exit DRAM self-refresh modes must not be executed in DRAM. A small
|
|
|
|
* section of IRAM is used instead for this.
|
|
|
|
*
|
|
|
|
* Suspend is handled with the following logic:
|
|
|
|
* Backup a small area of IRAM used for the suspend code
|
|
|
|
* Copy suspend code to IRAM
|
|
|
|
* Transfer control to code in IRAM
|
|
|
|
* Places DRAMs in self-refresh mode
|
|
|
|
* Enter direct-run mode
|
|
|
|
* Save state of HCLK_PLL PLL
|
|
|
|
* Disable HCLK_PLL PLL
|
|
|
|
* Enter halt mode - CPU and buses will stop
|
|
|
|
* System enters direct-run mode when an enabled event occurs
|
|
|
|
* HCLK PLL state is restored
|
|
|
|
* Run mode is entered
|
|
|
|
* DRAMS are placed back into normal mode
|
|
|
|
* Code execution returns from IRAM
|
|
|
|
* IRAM code are used for suspend is restored
|
|
|
|
* Suspend mode is exited
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/suspend.h>
|
|
|
|
#include <linux/io.h>
|
|
|
|
#include <linux/slab.h>
|
|
|
|
|
|
|
|
#include <asm/cacheflush.h>
|
|
|
|
|
|
|
|
#include <mach/hardware.h>
|
|
|
|
#include <mach/platform.h>
|
|
|
|
#include "common.h"
|
|
|
|
|
|
|
|
#define TEMP_IRAM_AREA IO_ADDRESS(LPC32XX_IRAM_BASE)
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Both STANDBY and MEM suspend states are handled the same with no
|
|
|
|
* loss of CPU or memory state
|
|
|
|
*/
|
|
|
|
static int lpc32xx_pm_enter(suspend_state_t state)
|
|
|
|
{
|
|
|
|
int (*lpc32xx_suspend_ptr) (void);
|
|
|
|
void *iram_swap_area;
|
|
|
|
|
|
|
|
/* Allocate some space for temporary IRAM storage */
|
|
|
|
iram_swap_area = kmalloc(lpc32xx_sys_suspend_sz, GFP_KERNEL);
|
|
|
|
if (!iram_swap_area) {
|
|
|
|
printk(KERN_ERR
|
|
|
|
"PM Suspend: cannot allocate memory to save portion "
|
|
|
|
"of SRAM\n");
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Backup a small area of IRAM used for the suspend code */
|
|
|
|
memcpy(iram_swap_area, (void *) TEMP_IRAM_AREA,
|
|
|
|
lpc32xx_sys_suspend_sz);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Copy code to suspend system into IRAM. The suspend code
|
|
|
|
* needs to run from IRAM as DRAM may no longer be available
|
|
|
|
* when the PLL is stopped.
|
|
|
|
*/
|
|
|
|
memcpy((void *) TEMP_IRAM_AREA, &lpc32xx_sys_suspend,
|
|
|
|
lpc32xx_sys_suspend_sz);
|
|
|
|
flush_icache_range((unsigned long)TEMP_IRAM_AREA,
|
|
|
|
(unsigned long)(TEMP_IRAM_AREA) + lpc32xx_sys_suspend_sz);
|
|
|
|
|
|
|
|
/* Transfer to suspend code in IRAM */
|
|
|
|
lpc32xx_suspend_ptr = (void *) TEMP_IRAM_AREA;
|
|
|
|
flush_cache_all();
|
|
|
|
(void) lpc32xx_suspend_ptr();
|
|
|
|
|
|
|
|
/* Restore original IRAM contents */
|
|
|
|
memcpy((void *) TEMP_IRAM_AREA, iram_swap_area,
|
|
|
|
lpc32xx_sys_suspend_sz);
|
|
|
|
|
|
|
|
kfree(iram_swap_area);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2010-11-16 06:14:02 -07:00
|
|
|
static const struct platform_suspend_ops lpc32xx_pm_ops = {
|
2010-07-27 09:35:56 -06:00
|
|
|
.valid = suspend_valid_only_mem,
|
|
|
|
.enter = lpc32xx_pm_enter,
|
|
|
|
};
|
|
|
|
|
|
|
|
#define EMC_DYN_MEM_CTRL_OFS 0x20
|
|
|
|
#define EMC_SRMMC (1 << 3)
|
|
|
|
#define EMC_CTRL_REG io_p2v(LPC32XX_EMC_BASE + EMC_DYN_MEM_CTRL_OFS)
|
|
|
|
static int __init lpc32xx_pm_init(void)
|
|
|
|
{
|
|
|
|
/*
|
|
|
|
* Setup SDRAM self-refresh clock to automatically disable o
|
|
|
|
* start of self-refresh. This only needs to be done once.
|
|
|
|
*/
|
|
|
|
__raw_writel(__raw_readl(EMC_CTRL_REG) | EMC_SRMMC, EMC_CTRL_REG);
|
|
|
|
|
|
|
|
suspend_set_ops(&lpc32xx_pm_ops);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
arch_initcall(lpc32xx_pm_init);
|